Debian Codegraph @

util/ps2fax.gs.sh.in

raw ◀ ▶
Source reconstructed at patch state 0 of 1 — not the installed (fully patched) source.
1 Debian patch touch this file
1 #! @SCRIPT_SH@
2 # $Id$
3 #
4 # HylaFAX Facsimile Software
5 #
6 # Copyright (c) 1990-1996 Sam Leffler
7 # Copyright (c) 1991-1996 Silicon Graphics, Inc.
8 # HylaFAX is a trademark of Silicon Graphics
9 #
10 # Permission to use, copy, modify, distribute, and sell this software and
11 # its documentation for any purpose is hereby granted without fee, provided
12 # that (i) the above copyright notices and this permission notice appear in
13 # all copies of the software and related documentation, and (ii) the names of
14 # Sam Leffler and Silicon Graphics may not be used in any advertising or
15 # publicity relating to the software without the specific, prior written
16 # permission of Sam Leffler and Silicon Graphics.
17 #
18 # THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
19 # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
20 # WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
21 #
22 # IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
23 # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
24 # OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
25 # WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
26 # LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
27 # OF THIS SOFTWARE.
28 #
29
30 #
31 # Convert PostScript to facsimile using Ghostscript.
32 #
33 # ps2fax [-o output] [-l pagelength] [-w pagewidth]
34 # [-r resolution] [-m maxpages] [-*] [file ...]
35 #
36 # We need to process the arguments to extract the input
37 # files so that we can prepend a prologue file that sets
38 # up a non-interactive environment.
39 #
40 # NB: this shell script is assumed to be run from the
41 # top of the spooling hierarchy -- s.t. the etc directory
42 # is present.
43 #
44
45 test -f etc/setup.cache || {
46 SPOOL=`pwd`
47 cat<<EOF
48
49 FATAL ERROR: $SPOOL/etc/setup.cache is missing!
50
51 The file $SPOOL/etc/setup.cache is not present. This
52 probably means the machine has not been setup using the faxsetup(@MANNUM1_8@)
53 command. Read the documentation on setting up HylaFAX before you
54 startup a server system.
55
56 EOF
57 exit 1
58 }
59 . etc/setup.cache
60
61 PS=$GSRIP
62
63 fil=
64 out=ps.fax # default output filename
65 pagewidth=1728 # standard fax width
66 pagelength=297 # default to A4
67 vres=98 # default to low res
68 device=tiffg3 # default to 1D
69 unlimitedlength=no # default to fixed length-pages
70 while test $# != 0
71 do
72 case "$1" in
73 -o) shift; out="$1" ;;
74 -w) shift; pagewidth="$1" ;;
75 -l) shift; pagelength="$1" ;;
76 -r) shift; vres="$1" ;;
77 -m) shift;; # NB: not implemented
78 -U) unlimitedlength=yes ;;
79 -1) device=tiffg3 ;;
80 -2) ($PS -h | grep tiffg32d >/dev/null 2>&1) \
81 && { device=tiffg32d; } \
82 || { device=tiffg3; }
83 ;;
84 -3) ($PS -h | grep tiffg4 >/dev/null 2>&1) \
85 && { device=tiffg4; } \
86 || { device=tiffg3; }
87 ;;
88 -*) ;;
89 *) fil="$fil $1" ;;
90 esac
91 shift
92 done
93 test -z "$fil" && fil="-" # read from stdin
94 case "${pagewidth}x${pagelength}" in
95 1728x280|1728x279|2592x280|2592x279|3456x280|3456x279) # 279.4mm is actually correct...
96 paper=letter;;
97 1728x364|2592x364|3456x364)
98 paper=legal;;
99 *x296|*x297) # more roundoff problems...
100 paper=a4;;
101 *x364)
102 paper=b4;;
103 2432x*|3648x*|4864x*)
104 paper=a3;;
105 *)
106 echo "$0: Unsupported page size: $pagewidth x $pagelength";
107 exit 254;; # causes document to be rejected
108 esac
109 #
110 # The image must end up with a pixel width according to T.32 Table 21.
111 # Ghostscript contains code to fixate a4 and letter to 1728 pixels
112 # when using 196-204 dpi and tiffg3/4, it supposedly does the same for
113 # B4 but not for A3, thus the floats are needed (for A3's benefit).
114 #
115 # See ghostscript/doc/Devices.htm under -dAdjustWidth=1 (default).
116 # Use -dAdjustWidth=0 to disable. With the right patch,
117 # http://bugs.ghostscript.com/show_bug.cgi?id=688064
118 # AdjustWidth can be made to specify the pagewidth directly and
119 # replace -dFIXEDMEDIA to permit TIFFs to be produced with
120 # varied lengths.
121 #
122 case "$paper" in
123 a4)
124 case "$pagewidth" in
125 2592) hres=313.65;; # VR_300X300
126 3456) hres=418.20;; # VR_R16
127 *) hres=209.10;; # everything else, 1728 pixels
128 esac;;
129 b4)
130 case "$pagewidth" in
131 3072) hres=311.97;; # VR_300X300
132 4096) hres=415.95;; # VR_R16
133 *) hres=207.98;; # everything else, 2048 pixels
134 esac;;
135 a3)
136 case "$pagewidth" in
137 3648) hres=311.94;; # VR_300X300
138 4864) hres=415.93;; # VR_R16
139 *) hres=207.96;; # everything else, 2432 pixels
140 esac;;
141 *) # letter, legal
142 case "$pagewidth" in
143 2592) hres=304.94;; # VR_300X300
144 3456) hres=406.59;; # VR_R16
145 *) hres=203.29;; # everything else, 1728 pixels
146 esac;;
147 esac
148
149 #
150 # The sed work fixes bug in Windows-generated
151 # PostScript that causes certain international
152 # character marks to be placed incorrectly.
153 #
154 # | $SED -e 's/yAscent Ascent def/yAscent 0 def/g' \
155 #
156 # NB: unfortunately it appears to break valid PostScript;
157 # so it's been disabled.
158
159 #
160 # Suggestion from "Alan Sparks" <[email protected]>,
161 # Add the -DFIXEDMEDIA argument to the last command in ps2fax.
162 # This prevents page sizing within the documents from altering
163 # the command-line page size specification. This prevents
164 # TIFFs to be made with pages of varied lengths, however.
165 # See the comments on AdjustWidth above.
166 #
167 FIXEDWIDTH="-dFIXEDMEDIA"
168 STRIPSIZE="-dMaxStripSize=0"
169
170 #
171 # Apply customizations such as watermarking.
172 #
173 if [ -f etc/FaxModify ]; then
174 . etc/FaxModify
175 fi
176
177 $CAT $fil | $PS -q \
178 -sDEVICE=$device \
179 -dNOPAUSE \
180 -dSAFER=true \
181 -sPAPERSIZE=$paper \
182 $FIXEDWIDTH \
183 $STRIPSIZE \
184 -r$hres\x$vres \
185 "-sOutputFile=$out" \
186 -