# $Id$ # # prototype config for Eicon Diva # # CONFIG:CLASS1:Eicon*:.*:.*: Manufacturer=Eicon Model=Diva # # BEGIN-SERVER # END-SERVER ModemType: Class1 # use this to supply a hint # # Make sure the modem gives us Caller*ID in a legible way. # ModemResetCmds: AT#CID=14 # # Eicon recommends initializing with AT+iQ=a1 where "1" is # the controller number. This command binds the tty to that # controller and bypasses the "channel pool" approach. # #ModemResetCmds: AT#CID=14+iQ=a1 # # These should match the modem responses for DID and Caller*ID. # CallIDPattern: "DAD: " CallIDPattern: "CID: "