#!/usr/bin/env python3 # Shellscript to verify r.solute.transport calculation, this calculation is based on # the example 1.1 and 1.2 at page 175 of the following book: # title = "Str{\"o}mungs und Transportmodellierung", # author = "Lege, T. and Kolditz, O. and Zielke W.", # publisher = "Springer", # edition = "2. Auflage", # year = "1996", # series = "Handbuch zur Erkundung des Untergrundes von Deponien und Altlasten" import grass.script as gs # Overwrite existing maps gs.run_command("g.gisenv", set="OVERWRITE=1") gs.message(_("Set the region")) # The area is 2000m x 1000m with a cell size of 50m x 50m gs.run_command("g.region", res=50, res3=50, t=25, b=0, n=1000, s=0, w=0, e=2000) gs.message(_("Create all the input maps needed for groundwater flow computation")) # Initial condition of the piezometric head, we have a huge gradient from 275m to 50m # over a distance of 2000m gs.run_command("r.mapcalc", expression="phead_1=if(col() == 1 , 275, 50)") # Set the active cells and the dirichlet boundary condition, # the first and the last cells a dirichlet gs.run_command("r.mapcalc", expression="status_1=if(col() == 1 || col() == 40 , 2, 1)") # We have a no wells gs.run_command("r.mapcalc", expression="well_1=0") # The hydraulic conductivity is 0.0001 m/s gs.run_command("r.mapcalc", expression="hydcond_1=0.0001") # The recharge, well we have no recharge at all gs.run_command("r.mapcalc", expression="recharge_1=0") # We have a confined aquifer with a height of 25m gs.run_command("r.mapcalc", expression="top_conf_1=25") # Bottom of the aquifer starts at 0m gs.run_command("r.mapcalc", expression="bottom_1=0") # This porosity of sand aquifer is 0.17 in example 1.1 gs.run_command("r.mapcalc", expression="poros_1=0.17") # The specific yield of a confined aquifer gs.run_command("r.mapcalc", expression="syield_1=0.0001") gs.run_command("r.mapcalc", expression="null_1=0.0") gs.message( "First compute a steady state groundwater flow with a mean velocity" " of 5.88 m/d or 6.8*10^5m/s" ) # Compute the steady state groundwater flow gs.run_command( "r.gwflow", solver="cg", top="top_conf_1", bottom="bottom_1", phead="phead_1", status="status_1", hc_x="hydcond_1", hc_y="hydcond_1", q="well_1", s="syield_1", recharge="recharge_1", output="gwresult_conf_1", dt=8640000000000, type="confined", ) gs.message(_("generate the transport data")) # The initial concentration is zero gs.run_command("r.mapcalc", expression="c_1=if(col() == 10 && row() == 10 , 0.0, 0.0)") # One inner sources (result of chemical reaction) gs.run_command( "r.mapcalc", expression="cs_1=if(col() == 10 && row() == 10 , 0.0013888, 0.0)" ) # No pollution by well gs.run_command("r.mapcalc", expression="cin_1=0.0") # We have a transfer boundary condition gs.run_command("r.mapcalc", expression="tstatus_1=if(col() == 1 || col() == 40 , 3, 1)") # No diffusion coefficient known for the solution gs.run_command("r.mapcalc", expression="diff_1=0.0") # Normal retardation gs.run_command("r.mapcalc", expression="R_1=1.0") # Longitudinal and transversal dispersivity length al = 100m, at = 10m AL = 100 AT = 10 # Compute the solute transport using the above defined dispersivity coefficients # for a timestep of 1000d gs.run_command( "r.solute.transport", "c", error=0.000000000000001, maxit=1000, solver="bicgstab", top="top_conf_1", bottom="bottom_1", phead="gwresult_conf_1", status="tstatus_1", hc_x="hydcond_1", hc_y="hydcond_1", rd="R_1", cs="cs_1", q="well_1", nf="poros_1", output="stresult_conf_1", dt=86400000, diff_x="diff_1", diff_y="diff_1", cin="cin_1", c="c_1", al=AL, at=AT, vx="stresult_conf_vel_1_x", vy="stresult_conf_vel_1_y", ) # Get the maximum concentration range = gs.parse_command("r.info", "r", map="stresult_conf_1") # Normalize the result gs.run_command( "r.mapcalc", expression="stresult_conf_1_norm = stresult_conf_1/" + str(range["max"]), ) # Create contour lines range from 0.7 to 0.1 in 0.1 steps gs.run_command( "r.contour", input="stresult_conf_1_norm", output="stresult_conf_1_norm", minlevel=0.1, maxlevel=0.7, step=0.1, ) # The second computation uses different porosity for higher groundwater velocity # Used to compute a lower velocity, so the mean velocity is # about 1 m/d or 1.15*10^-5 m/s gs.run_command("r.mapcalc", expression="poros_2=1") # Compute the solute transport using the above defined dispersivity coefficients for # a timestep of 1000d gs.run_command( "r.solute.transport", "c", error=0.000000000000001, maxit=1000, solver="bicgstab", top="top_conf_1", bottom="bottom_1", phead="gwresult_conf_1", status="tstatus_1", hc_x="hydcond_1", hc_y="hydcond_1", rd="R_1", cs="cs_1", q="well_1", nf="poros_2", output="stresult_conf_2", dt=86400000, diff_x="diff_1", diff_y="diff_1", cin="cin_1", c="c_1", al=AL, at=AT, vx="stresult_conf_vel_2_x", vy="stresult_conf_vel_2_y", ) # Get the maximum concentration range = gs.parse_command("r.info", "r", map="stresult_conf_2") # Normalize the result gs.run_command( "r.mapcalc", expression="stresult_conf_2_norm = stresult_conf_2/" + str(range["max"]), ) # Create contour lines range from 0.7 to 0.1 in 0.1 steps gs.run_command( "r.contour", input="stresult_conf_2_norm", output="stresult_conf_2_norm", minlevel=0.1, maxlevel=0.7, step=0.1, )