AAvgPowerAverage aPower平均功率wattswAverage altitude power. Recorded power adjusted to take into account the effect of altitude on vo2max and thus power output.平均海拔功率。按海拔數值對vo2max及功率輸出之比例調整紀錄之功率。ANTlocalControllerFound Garmin Express service找到Garmin Express服務The Garmin Express service is active on your computer.
This can block GoldenCheetah from accessing your ANT+ stick.
Do you want to temporarily disable the service?Garmin Express服務目前在使用中。
GoldenCheetah可能無法使用你的ANT+ USB。
你是否要暫時停止該服務?Failed stopping Garmin Express service停止Garmin Express服務失敗GoldenCheetah failed to stop the Garmin Express service.
It might be necessary to manually disable it.GoldenCheetah無法停止Garmin Express服務。
可能要手動停止。Cannot open ANT+ device無法啟動ANT+裝置APPercentPower Percent of Max功率最大百分比Power as percent of Pmax according to Power Zones按功率區間顯示功率為Pmax之百分比AboutDialogAbout GoldenCheetah關於GoldenCheetahAbout關於Version版本Contributors貢獻團隊AboutModelPageW'bal tau (s)W'Bal τ (s)STS average (days)平均短期Short Term Stress (d)LTS average (days)平均長期Long Term Stress (d)sdaysPMC Stress Balance Today本日PMC壓力平衡Restore DefaultsW'bal tauShort Term Stress (STS) averageLong Term Stress (LTS) averageAboutPage<center><img src=":images/gc.png" height=80><h2>GoldenCheetah</h2>Cycling Power Analysis Software<br>for Linux, Mac, and Windows<p>GoldenCheetah is licensed under the<br><a href="https://opensource.org/licenses/GPL-2.0">GNU General Public License 2.0</a>.<p>Source code can be obtained from<br><a href="https://www.goldencheetah.org/">https://www.goldencheetah.org/</a>.<br><p>Activity files and other data are stored in<br><a href="%1">%2</a><p>Athlete ID %3<br><p>Trademarks used with permission<br>BikeScore, xPower, SwimScore courtesy of <a href="http://www.physfarm.com">Physfarm Training Systems</a>.<br>Virtual Speed courtesy of Tom Compton <a href="http://www.analyticcycling.com">AnalyticCycling</a>.<br><br>The core body temperature module was developed by the <br><a href="http://www.usariem.army.mil/">U.S. Army Research Institute of Environmental Medicine</a><br> and is patent pending<br><br><img src=":images/services/strava_compatible.png"/><br></center>AboutRiderPageNickname暱稱Date of Birth生日Sex性別Weight體重Height高Male男性Female女性 kg kg lb lb cm inCalculate...Bike騎車Crank Length曲柄長度Wheelsize輪徑ImagesmmmmChoose Picture選擇照片Images (*.png *.jpg *.bmp)影像格式AbsWattagePageWorkout Wizard訓練課表精靈Absolute Wattage Workout Creator絕對瓦特數訓練課表Minutes分Wattage瓦特數Time (minutes)時間 (min)Save Workout儲存訓練課表Computrainer Format *.ergComputrainer 格式 *.ergAbstractViewCompare Activities and Intervals活動紀錄及區段比較Compare Date Ranges日期範圍比較Intensity Adjustments and Workout Control強度調整及訓練課表控制Problem Saving User GUI configurationFile: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀Perspective ImportNo perspectives found that are appropriate for the current view.Add New Perspective...Manage Perspectives...ActionButtonBoxUp上Down下Edit編輯++--AddDelete刪除ActivityCRCChecksum校驗碼A checksum for the activity, can be used to trigger cache refresh in R scripts.活動紀錄之校檢碼,可用以觸法R腳本快取之重新整理。AddAthleteCoached Athletes受訓運動員Select Athlete for this account選擇此帳號的運動員AddAuthService Credentials 服務憑證 Credentials and authorisation憑證和授權Authorise授權URL網址Key (optional)金鑰(選用)Username使用者名稱Password密碼Token授權憑證Message訊息%1 Credentials and authorisation%1 憑證和授權AddClassService Type服務型式What type of Service are you adding an account for ?你要新增什麼類型的服務帳號?Activities活動紀錄Sync activities with services like Today's Plan, Strava, Dropbox and Google Drive與Today's Plan,Strava,Dropbox或Google Drive同步活動紀錄MeasuresDownload measures such as weight, body fat, HRV and sleep.Sync planned workouts to WebDAV and CalDAV calendars like Google Calendar.同步訓練課表計劃到Google日曆等WebDAV及CalDAV日曆。Calendar行事曆AddCloudWizardAdd Cloud Wizard新增雲服務精靈Edit Account Details修改帳號資料AddConsentTerms of Service服務條款Your consent is needed需要您的同意Accept接受AddDeviceWizardAdd Device Wizard新增裝置精靈AddFinalDone結束Confirm configuration and add device確認設定並新增裝置We will now add a new device with the configuration shown below. Please take a moment to review and then click Finish to add the device and complete this wizard, or press the Back button to make amendments.
即將要使用下列的組態新增裝置。請花一點時間檢視並按下完成以新增裝置或按下上一步做修改。Name*名稱*Port連接埠Profile簡要資訊Virtual PowerAddFinishDone結束Add Cloud Account新增雲端帳號URL網址Key金鑰Username使用者名稱Password密碼Token授權憑證Folder檔案夾Athlete ID運動員IDSync on start程式啓動時進行同步Sync on import匯入時進行同步AddFirmwareSelect Firmware選擇韌體Select Firmware for Tacx Fortius為Tacx Fortius選擇韌體Browse瀏覽Copy to Library複製到程式庫Tacx Fortius trainers require a firmware file which is provided by Tacx BV. This file is a copyrighted file and cannot be distributed with GoldenCheetah.
On windows it is typically installed in C:\Windows\system32 and is called 'FortiusSWPID1942Renum.hex'.
On Linux and Apple computers you will need to extract it from the VR Software CD.The file we need is within the 'data2.cab' file, which is an InstallShield file that can be read with the 'unshield' tool
Please take care to ensure that the file is the latest version of the Firmware file.
If you choose to copy to library the file will be copied into the GoldenCheetah library, otherwise we will reference it. 與Tacx Fortius訓練台進行連線,必須使用Tacx BV提供的韌體檔。 此檔案是受版權保護的文件,無法與GoldenCheetah一起發佈。
在Windows上,它通常安裝在C:\ Windows \ system32中,稱為“FortiusSWPID1942Renum.hex”。
在Linux和Apple電腦上,您需要從VR軟件CD中提取它。此檔案位於'data2.cab'文件中,需使用'unshield'工具讀取此InstallShield格式文檔
請確保韌體檔是最新版本。
如果您選擇複製到程式庫的選項,此檔案將被複製到GoldenCheetah程式庫檔案夾中,否則我們僅引用此檔案而不複製。File:檔案:Open File開啟檔案Intel Firmware File (*.hex)Intel韌體檔(*.hex)AddImagicSelect Device driver選擇裝置驅動程式Select Driver for Tacx Imagic為Tacx Imagic選擇驅動程式Browse瀏覽Copy to Library複制到資料庫Tacx Imagic trainers require firmware to be loaded. This firmware is embedded within the device driver I-magic.sys which is provided by Tacx BV.This is a copyrighted file and cannot be distributed with GoldenCheetah.
On windows systems with Tacx Fortius/Imagic installed you will typically find this in C:\Windows\system32.
Alternatively, you can extract it from a Tacx software CD
On older Fortius cds it lives in the directory FortiusInstall\Support\driver_imagic.
On later TTS cds it is in support\drivers_usb_interface\32
Place a copy of this file somewhere on this PC and reference it above.
If you choose to copy to library the file will be copied into the GoldenCheetah library, otherwise we will reference it in place. 與Tacx Imagic訓練台進行連線必須使用韌體檔。 此韌體檔內置於Tacx BV提供之驅動程式檔案I-magic.sys內。此檔案是受版權保護的文件,無法與GoldenCheetah一起發佈。
在安裝Fortius/Imagic的Windows電腦,它通常安裝在C:\ Windows \ system32中。
亦可從Tacx軟體CD提取此檔。
在舊版Fortius CD它在檔案夾路徑FortiusInstall\Support\driver_imagic
在新版TTS CD它在檔案夾路徑support\drivers_usb_interface\32
需複製此檔並放於本機,並填寫路徑位置。
如果您選擇複製到程式庫的選項,此檔案將被複製到GoldenCheetah程式庫檔案夾中,否則我們僅引用此檔案而不複製。File:檔案:Open File開啟檔案Tacx Device driver (*.sys)Tacx驅動程式 (*.sys)AddIntervalDialogMethod: 方法: Peak Power功率峰值Type: 種類: Standard標準Custom自定Find Intervals尋找區段Ascent (elevation)爬升高度W' (Energy)W'(能量)Heart rate心率Peak Speed速度峰值Peak Pace段速峰值Time / Distance時間 / 距離Length: 長度: By time依時間By distance依距離Time: 時間: hrs 小時 mins 分 secs秒Distance: 距離: How many to find: 尋找: Minimum W' Cost: 最小W'花費: Minimum Ascent: 最小爬升: &Find尋找(&F)Results:結果:&Add to Activity新增至活動紀錄(&A)Select Activity選擇活動紀錄No activity selected!未選擇任何活動紀錄!Peak HR最高心率Climb #%1 (%2m)爬坡 #%1 (%2m)Match %1 (%2kJ)點火 %1 (%2kJ)Peak峰值%1 %3%4 %2%1 %3%4 %2Bad Interval Length無效的區段長度Interval length must be greater than zero!區段長度需大於0!AddPairPair Devices配對裝置Search for and pair ANT+ devices (Pair FE-C sensor only for FE-C devices)Sensor感測器ANT+ IdANT+IDValue數値Status狀態none無Un-Paired未配對Unused未使用Master主裝置Searching...搜尋中...Paired已配對AddPairBTLEBluetooth 4.0 SensorsSearch for and pair of BTLE sensors.Device裝置No sensors found...AddPerspectiveDialogEdit PerspectiveAdd PerspectivePerspective NameSwitch expressionActivities filterDon't switchErg WorkoutSlope WorkoutVideo WorkoutMap WorkoutSwitch forOKOKAddCancel取消AddSearchScan for connected devices掃描已連接的裝置Please make sure your device is connected, switched on and working. We will scan for the device type you have selected at known ports.
請確定已經切換被連接到你運作中的裝置。接下來GoldenCheetah將依你選擇的連接垖開始掃描裝置Search搜尋If your device is not found you can select the device port manually by using the selection box below.若尚未搜尋到你的裝置,你可以手動裝置使用的連接埠
Device found.
Click Next to Continue
找到裝置
按下一步繼續
%1 Search尋找 %1Select COM port選擇COM portSearch Again再次搜尋
Device found (%1).
Press Next to Continue
裝置: %1 已找到
請按下一步繼續
Device found.
Press Next to Continue
裝置已找到
請按下一步繼續
Stop Searching停止搜尋Search again再次搜尋AddServiceAccount Type帳號型式Select the cloud service type選擇雲端服務型式AddSettingsCloud Service Settings雲端服務設定Folder檔案夾Browse瀏覽Sync on startup程式啓動時進行同步Sync on import匯入時進行同步Service Settings服務設定Connection Failed連線失敗Choose Athlete Directory選擇運動員檔案夾AddTileConfigTile SettingsAddTileFinalDone結束Add TileAddTileTypeTile TypeSelect the type of tileAddTileWizardAdd Tile WizardAddTypeSelect Device選擇裝置What kind of device to add欲新增的裝置AddVirtualPowerFit StdDev: %1Max Order: %1Setup Virtual PowerUse this page to setup virtual power for trainers that can only report speed or rpm. It is probably a bad idea to derive power from speed when also receiving power data from the trainer.
Virtual Power CurvemmmmTrainer's Moment of Inertia (KG M^2)Wheel Size輪徑Stride Length (cm)步幅 (cm)Rotational Inertia (KG M^2)Custom Virtual Power CurveMax Polynomial Order:Max Order for polynomial fitPolynomial Epsilon:Polynomial fit criteria, in watts. Larger value permits looser fit.StdDev of fit to data: %1 Order of fit: %1Name:名稱:Create and SelectGive the current fit a name and use for this device.None無AddXDataSeriesCommandAdd XData Series新增XData序列AerobicDecouplingAerobic Decoupling有氧心率脫勾率%%Aerobic decoupling is a measure of how much heart rate rises or how much power/pace falls off during the course of a long ride/run.有氧心率脫勾率計算長程騎乘或長跑時心率上升或功率/段速下降的速率。AerolabElevation (m)海拔標高 (m)Distance (km)距離 (km)V-Elevation垂直爬升高度Elevation海拔標高Elevation (')海拔標高 (')Elevation (ft)Distance 距離 Time (minutes)時間 (min)No ride selected未選擇騎乘Estimates out-of-range估計值超過範圍At least two segments must be independent至少兩個區段必須為獨立At least two segments must be defined必須定義至少兩個區段Altitude and Power data must be present標高及功率資料必需存在No activity selected未選擇活動紀錄AerolabWindowCrrCrrCdACdAEta預估時間Comment筆記Total Mass (kg)總重量 (kg)Rho (kg/m^3)Rho (kg/m^3)Eoffset (m)Eoffset (m)eoffset autoeoffset (自動)Constant altitude (velodrome,...)自定海拔標高 (特定自行車場等...)X Axis Shows Time時間顯示於X軸X Axis Shows Distance時間顯示於X軸&Estimate CdA and Crr估計CdA及Crr(&E)&Save parameters儲存參數(&S)Estimate CdA and Crr估計CdA及CrrAllPlotPower輸出功率Heart Rate心率Speed速度Percent百分比Cadence迴轉數Heartrate心率Acceleration加速率Power Delta功率差Cadence Delta迴轉數差Torque Delta扭矩差Heartrate Delta心率差W'balW'BalAltitude標高Headwind逆風Temperature溫度Torque扭矩W' Balance (kJ)W'Bal (kJ)Core Temperature核心溫度SmO2SmO2Slope坡度HbHb** Minimum CP=%1 **** 最小 CP=%1 **** Check W' is set correctly **** 確認 W' 已正確設定 **Tau=%1, CP=%2, W'=%3, %4 match >2kJ (%5 kJ) %6Tau=%1, CP=%2, W'=%3, %4 點火 >2kJ (%5 kJ) %6Tau=%1, CP=%2, W'=%3, %4 matches >2kJ (%5 kJ) %6Tau=%1, CP=%2, W'=%3, %4 點火 >2kJ (%5 kJ) %6R-RR-RAlt/Slope高度/坡度Anaerobic TISS無氧TISSAerobic TISS有氧TISSIsoPowerIsoPowerVertical Oscillation重直振幅Run Cadence跑動步頻GCTGCTGear Ratio齒輪比tHbtHbO2HbO2HbHHbHHbxPowerxPowerLeft Pedal Smoothness左踏板平滑度Right Pedal Smoothness右踏板平滑度Left Torque Efficiency左扭矩效率Right Torque Efficiency右扭矩效率Left/Right Pedal Center Offset左右踏板施力偏移PCOLeft Power Phase左側功率分佈PPRight Power Phase右側功率分佈PPLeft Peak Power Phase左側峰值功率分佈PPRight Peak Power Phase右側峰值功率分佈PPL/R Balance左/右平衡aPoweraPowerMatches點火次數Left Pedal Center Offset左側踏板施力偏移PCORight Pedal Center Offset右側踏板施力偏移PCOLeft Balance左平衡Right Balance右平衡min/kmmin/kmmin/milemin/mi
%1 %2
%1 %2min/100mmin/100mmin/100ydmin/100ydmin/500mmin/100m {500m?}W'W'Match點火Power Ref功率基準Heart Rate Ref心率基準Cadence Ref迴轉數基準TISSTISSWattswBPMbpmRPMrpmKPHkphMPHmphNmNmftLbftLbMetersmFeetftAllPlotObjectPower功率anTISS無氧TISSaTISS有氧TISSIsoPowerIsoPowerVertical Oscillation重直振幅Run Cadence跑動步頻GCTGCTGear Ratio齒輪比SmO2SmO2tHbtHbO2HbO2HbHHbHHbxPowerxPoweraPoweraPowerHeart Rate心率Core Temperature核心溫度Acceleration加速率Power Delta功率差Cadence Delta迴轉數差Torque Delta扭矩差Heartrate Delta心率差Speed速度Cadence迴轉數Altitude標高Alt/Slope高度/坡度Slope坡度Temperature溫度Wind風向Torque扭矩Left Balance左平衡Right Balance右平衡Left Torque Efficiency左扭矩效率Right Torque Efficiency右扭矩效率Left Pedal Smoothness左踏板平滑度Right Pedal Smoothness右踏板平滑度Left Pedal Center Offset左側踏板施力偏移PCORight Pedal Center Offset右側踏板施力偏移PCOLeft Pedal Power Phase左側功率分佈PPRight Pedal Power Phase右側功率分佈PPLeft Peak Pedal Power Phase左側峰值功率分佈PPRight Peak Pedal Power Phase右側峰值功率分佈PPW' Balance (kJ)W'Bal (kJ)Matches點火次數AllPlotWindowSmooth平滑化Stacked堆疊by series依序列Fullplot全圖Overlay浮動視窗View檢視Stack堆疊By Series依序列Stack Zoom堆疊放大Full plot全圖Show Interval MarkersInterval Navigator區段搜尋器Hover intervals暫選區段Fill Curves填滿曲線Grid格點Acceleration加速率Delta Series差值序列Power %1功率 %1Cadence %1迴轉數 %1Torque %1扭矩 %1Heartrate %1心率 %1Balance平衡Left/Right左/右Torque Effectiveness扭矩效率Smoothness平滑度Pedal Center Offset踏板施力偏移PCOPower Phase功率分佈PPPeak Power Phase峰值功率分佈PPVertical Oscillation重直振幅Running跑步Ground Contact Time觸地時間Cadence 迴轉數 SmO2SmO2MoxyMoxytHbtHbO2HbO2HbHHbHHbHeart Rate心率Data series資料序列Core Temperature核心溫度Speed速度Cadence迴轉數Basic基本Curves曲線User Data使用者資料Name名稱Formula計算公式Edit編輯Up上Down下Altitude標高Temperature溫度Headwind逆風Torque扭矩Gear Ratio齒輪比Slope坡度No Alt/Slope無高度/坡度資訊0.1km|mi - 1min0.1公里|英哩 - 1分0.5km|mi - 5min0.5公里|英哩 - 5分1.0km|mi - 10min1.0公里|英哩 - 10分Alt/Slope高度/坡度Anaerobic TISS無氧TISSMetrics計測量Aerobic TISS有氧TISSIso PowerIsoPowerSkiba xPowerSkiba xPowerAltitude Power等高功率W' balanceW'BalTime of day時間Intervals區段Selection #%1 選項 #%1 Power + shade輸出功率 (上色)Power - shade輸出功率 (不上色)No Power沒有輸出功率Shading顯示色Time時間Distance距離X AxisX軸AnalysisSidebarCalendar行事曆Activities活動紀錄Menu選單Intervals區段Save Changes儲存變更Revert to Saved version還原已儲存的版本Delete Activity刪除活動紀錄Split Activity分割活動紀錄Show Column Chooser顯示列選擇器Scroll to current ActivityDo Not Show In Groups不依群組顯示Group By依群組Expand All全部展開Collapse All折疊全部Reset to default恢復預設設定Sort User Intervals對使用者區段資料排序Mark as a performance test標記為能力測驗Rename route路線重新命名Stop tracking this segment停止追蹤此區段Create a performance test創建能力測驗Create a route segment創建路線區段No activity selected未選擇任何活動紀錄資料Current activity contains no data目前的活動紀錄並未包含資料Performance Test能力測驗Are you sure you want to delete selected interval?是否真的要刪除此區段?Remove移除Delete Interval刪除區段Unable to delete interval無法偵測區段Are you sure you want to stop tracking this segment?是否真的要停止追踪此區段?Find Intervals...尋找區段...Zoom out縮小Zoom to interval放大區段Edit interval編輯區段Delete interval刪除區段Rename selected intervals對選擇的區段重新命名Delete selected intervals刪除所選擇的區段Zoom Out縮小Find Intervals尋找區段AnalysisViewCompare Activities and Intervals活動紀錄及區段比較AnomalyDialogInvalid recording gap無效的記錄空白段Distance goes backwards.移動距離負向增加Cadence/Power duplicated when freewheeling.無踩踏時迴轉數或功率重覆。Speed Inconsistent with Distance/Time, stopping at 10 examplesSuspiciously high cadence迴轉過高,可能有誤Suspiciously high heartrate心率過高,可能有誤Suspiciously high speed速度過高,可能有誤Out of bounds value數值超過範圍Non-zero torque but zero cadence扭矩為非零值但迴轉數為0Power功率Data spike candidate疑似數值異常Anomalies異常數據AppendPointsCommandAppend Points追加資料點AppendXDataPointsCommandAppend XData Points追加XData資料點AthletePace Zones File %1 Error段速檔案 %1 錯誤Athlete Weight運動員體重Time In HR Zone各心率區間內所佔的時間Power Distribution功率分佈Vo2max EstimationVO2max預估KPI TrackerKPI追蹤Critical Power Trend臨界功率趨勢Aerobic Power有氧功率輸出Power Variance功率變化值Power Profile功率全覽Anaerobic Power無氧功率輸出Power & Speed Trend功率及速度趨勢圖Tempo & Threshold TimeTempo及臨界區間時間Training Mix各項訓練Time & Distance時間及距離Time In Power Zone各功率區間內所佔的時間Zones File %1 Error區間定義檔案 %1 錯誤Reading Zones File %1正在讀取區間定義檔 %1HR Zones File %1 Error心率區間定義檔案 %1 錯誤Reading HR Zones File %1正在讀取心率區間定義檔 %1Sustained Time In Zone各區間持續時間Time in W' Zone各W'區間內所佔的時間BikeScore and IntensityBikeScore及強度BikeStress and BikeIntensityBikeStress及BikeIntensityStress and Distance壓力與距離Calories vs Duration熱量距離比Stress (TISS)壓力 (TISS)Aerobic Response有氧反應Anaerobic Response無氧反應PMC (Coggan)PMC (Coggan)PMC (Skiba)PMC (Skiba)PMC (TRIMP)PMC (TRIMP)PMC (Distance)PMC (距離)PMC (Duration)PMC (經過時間)CP HistoryCP歷程CP Analysis臨界功率分析PMC (TriScore)PMC (TriScore)Time in Pace Zones各段速區間內所時間Run Pace跑步段速Swim Pace游泳段速AthleteBackupAbort Backup and Reset Counter中止備份及重置計數器Select Backup Directory選擇備份檔案夾Athlete Backup運動員資料備份No backup directory selected - backup aborted未選擇備份目錄 - 備份中止Any unsaved data will not be included into the backup .zip file.備份zip檔案將不包括未儲存資料。Do you want to proceed?要繼續嗎?Abort Backup中止備份Backup successfully stored in
%1成功存儲備份檔
%1No files found for athlete %1 - all athlete sub-directories are empty.所有運動員%1 之子目錄均為空 找不到檔案。Not enough space available on disk: %1 - no backup .zip file created硬碟%1 空間不足 - 未創件備份zip檔Directory %1 not available. No backup .zip file created for athlete %2.檔案夾%1 不可用,將不會建立運動員%2 之備份檔。Backup file %1 cannot be created.無法創建備份檔%1。Adding files to backup %1 for athlete %2 ...正在寫入運動員%2 份檔%1 ...AthleteBonesAthlete Bones運動員骨重kgkglbslbsAthlete bones in kg or lbs from body measurements按公斤或磅計算之運動員骨重AthleteCardOpen開啟Close關閉No activities.Last workout %1 days agoAthleteConfigAbout關於Model模型Zones區間Accounts帳號Pace段速Refresh in Progress刷新中A metric refresh is currently running, please try again once that has completed.MeasuresAuto Import自動匯入Backup備份Power輸出功率Heartrate心率AthleteConfigDialogClose關閉Save儲存Athlete settings for %1AthleteFatAthlete Bodyfat運動員體脂重kgkglbslbsAthlete bodyfat in kg or lbs from body measurements按公斤或磅計算之運動員體脂重AthleteFatPAthlete Bodyfat Percent運動員體脂百分比%%Bodyfat in Percent from body measurements按百分比計算之運動員體脂重AthleteLeanAthlete Lean Weight運動員瘦肉重kgkglbslbsLean Weight in kg or lbs from body measurements按公斤或磅計算之運動員瘦肉重AthleteMusclesAthlete Muscles運動員肌肉重kgkglbslbsAthlete muscles in kg or lbs from body measurements按公斤或磅計算之運動員肌肉重AthleteWeightAthlete Weight運動員體重kgkglbslbsWeight in kg or lbs: first from Athlete body measurements, then from Activity metadata and last from Athlete configuration with 75kg default以公斤或磅量測之體重:按運動員量測數值,活動紀錄之附加參數及運動員之75公斤預設配置依次選擇使用AutoImportPage++--Browse瀏覽Add新增Delete刪除Up上Down下Enter a directoryDirectory檔案夾Import Rule匯入規則Enter directory or press [Browse] to select輸入檔案夾或按[瀏覽]以選擇AverageWPKWatts Per Kilogram每公斤的瓦特數w/kgw/kgAverage Power relative to Athlete Weight.平均功率對體重比。AvgCadenceAverage Cadence平均迴轉數rpmrpmAverage Cadence, computed when Cadence > 0平均迴轉數,於迴轉數大於0時計算AvgCoreTempAverage Core Temperature平均核心溫度C°CAverage Core Temperature. The core body temperature estimate is based on HR data按心率估計之平均核心溫度AvgHeartRateAverage Heart Rate平均心率bpmbpmAverage Heart Rate computed for samples when hr is greater than zero平均心率,於心率大於0時計算AvgLPCOAverage Left Pedal Center Offset平均左側踏板施力偏移PCOmmmmininPlatform center offset is the location on the left pedal platform where you apply force, on average.左側踏板施力偏移為左踏板平面上平均施力位置。AvgLPPAverage Left Power Phase Length平均左側功率分佈PP長度°°It is the left pedal stroke region length where you produce positive power, on average.平均左側踩踏正施力位置區的長度。AvgLPPBAverage Left Power Phase Start平均左側功率分佈PP起始角度°°It is the left pedal stroke angle where you start producing positive power, on average.平均左側踩踏正施力位置區的起始角度。AvgLPPEAverage Left Power Phase End平均左側功率分佈PP結束角度°°It is the left pedal stroke angle where you end producing positive power, on average.平均左側踩踏正施力位置區的結束角度。AvgLPPPAverage Left Peak Power Phase Length平均左側峰值功率分佈PP長度°°It is the left pedal stroke region length where you produce peak power, on average.平均左側踩踏最高施力位置區的長度。AvgLPPPBAverage Left Peak Power Phase Start平均左側峰值功率分佈PP起始角度°°It is the left pedal stroke angle where you start producing peak power, on average.平均左側踩踏最高施力位置區的起始角度。AvgLPPPEAverage Left Peak Power Phase End平均左側峰值功率分佈PP結束角度°°It is the left pedal stroke angle where you end producing peak power, on average.平均左側踩踏最高施力位置區的結束角度。AvgLPSAverage Left Pedal Smoothness平均左踏板平滑度%%It measures how smoothly power is delivered to the left pedal throughout the revolution, on average.量測左側踩踏功率輸出在整個畫圓之平均流暢度。AvgLTEAverage Left Torque Effectiveness平均左扭矩效率%%It measures how much of the power delivered to the left pedal is pushing it forward, on average.量測左側踩踏功率輸出供給前進動力的平均比例。AvgPowerAverage Power平均輸出功率wattswAverage Power from all samples with power greater than or equal to zero平均輸出功率,涵蓋所有零及大於零數值AvgRPCOAverage Right Pedal Center Offset平均右側踏板施力偏移PCOmmmmininPlatform center offset is the location on the right pedal platform where you apply force, on average.右側踏板施力偏移為右踏板平面上平均施力位置。AvgRPPAverage Right Power Phase Length平均右側功率分佈PP長度°°It is the right pedal stroke region length where you produce positive power, on average.平均右側踩踏正施力位置區的長度。AvgRPPEAverage Right Power Phase End平均右側功率分佈PP結束角度°°It is the right pedal stroke angle where you end producing positive power, on average.平均右側踩踏正施力位置區的結束角度。AvgRPPPAverage Right Peak Power Phase Length平均右左側峰值功率分佈PP長度°°It is the right pedal stroke region length where you produce peak power, on average.平均右側踩踏最高施力位置區的長度。AvgRPPPBAverage Right Peak Power Phase Start平均右側峰值功率分佈PP起始角度°°It is the right pedal stroke angle where you start producing peak power, on average.平均右側踩踏最高施力位置區的起始角度。AvgRPPPEAverage Right Peak Power Phase End平均右側峰值功率分佈PP結束角度°°It is the right pedal stroke angle where you end producing peak power, on average.平均右側踩踏最高施力位置區的結束角度。AvgRPSAverage Right Pedal Smoothness平均右踏板平滑度%%It measures how smoothly power is delivered to the right pedal throughout the revolution, on average.量測右側踩踏功率輸出在整個畫圓之平均流暢度。AvgRTEAverage Right Torque Effectiveness平均左扭矩效率%%It measures how much of the power delivered to the right pedal is pushing it forward, on average.量測右側踩踏功率輸出供給前進動力的平均比例。AvgRTPPAverage Right Power Phase Start平均右側功率分佈PP起始角度°°It is the right pedal stroke angle where you start producing positive power, on average.平均右側踩踏正施力位置區的起始角度。AvgRunCadenceAverage Running Cadence平均跑動步頻spmspmAverage Running Cadence, computed when Cadence > 0平均跑動步頻,於迴轉數大於0時計算AvgRunGroundContactTimeAverage Ground Contact Time平均觸地時間msmsAvgRunStanceTimePercentAverage Stance Time Percent平均跑步觸地百分比%%Average Stance Time Percent (%): Ground Contact Time / Step Time平均跑步觸地百分比 (%):觸地時間除以步頻時間AvgRunVerticalOscillationAverage Vertical Oscillation平均跑步垂直振幅cmcmininAvgRunVerticalRatioAverage Vertical Ratio平均垂直百份比%%Average Vertical Ratio (%): Vertical Oscillation / Step Length平均垂直百份比 (%):垂直振幅除以步幅AvgSmO2Average SmO2平均SmO2%%Average Muscle Oxygen Saturation, the percentage of hemoglobin that is carrying oxygen.平均肌肉帶氧量即帶氧血紅素的百分比。AvgSpeedAverage Speed平均速度kphkphmphmphAverage Speed in kph or mph, computed from distance over time when speed not zero平均速度,於速度大於0時計算之距離時間比AvgStepLengthAverage Step Length平均單步幅mmmmAverage Step Length: average single step (L to R / R to L) length in mm平均單步幅:平均單步(左腳至右腳/右腳至左腳)步幅長度,以亳米為單位AvgStrideLengthAverage Stride Length平均步幅mmftftAvgTempAverage Temp平均溫度C°CF°FAverage Temp from activity data活動紀錄之平均溫度AvgtHbAverage tHb平均tHbg/dLg/dLAverage total hemoglobin concentration. The total grams of hemoglobin per deciliter.平均總血紅素濃度,即每百亳升之血紅素總重量公克。AzumThere is no tokenThere is no selected athleteJSON parser errorJSON解譯失敗No selected athleteCompleted.完成。AzumSync with new and unique coaching platform from Switzerland.BT40ControllerBluetooth scan finishedBT40DeviceConnected to device / service: InRide Spindown Updated: Smart Control - InitializingSmart Control - Speed Up to 35kphSmart Control - Stop PedallingSmart Control - Interference Detected - Try AgainKurt_SmartControl: write gradientFTMS Device: Set gradientKurt_InRide: STARTING CALIBRATION:Kurt_SmartControl: STARTING CALIBRATIONKurt_InRide: STOPPING CALIBRATION, systemID:Kurt_SmartControl: STOPPING CALIBRATIONKurt_SmartControl: set_mode_erg FTMS Device: Set target power FTMS Device: Set target power - after scaling Kurt_SmartControl: set_mode_fluid FTMS Device: Set load intensity FTMS Device: Set load intensity - after scaling FTMS Device: Set load level FTMS Device: Set load level - after scaling FTMS Device: Send simulation parameteresBackupPageEnter a directoryeverytimesneverBackup nowAuto Backup Folder自動備份檔案夾Auto Backup after closing the athleteBrowse瀏覽Auto Backup execution every自動備份間隔 每times the athlete is closed - 0 means never次關閉運動員資訊視窗(設定為0停止自動備份)Choose Backup Directory選擇備份檔案夾BatchProcessingDialogActivity Batch Processingcheck/uncheck all選擇/解除選擇所有FilenameDate日期Time時間Action動作dd MMM yyyyyyyy年M月d日hh:mm:ssExport匯出AsAll data (CSV)Browse瀏覽To至Overwrite FilesRun Data ProcessorEdit編輯Update MetadataDelete All Selected ActivitiesCancel取消Execute%1 files selectedSelect Target Directory選擇目標目錄--Processing...處理中...Abort停止Processed Exported Deleted Processing failed due date format error...Processing failed due time format error...Processing aborted by the user...Processing failed as the data processor cannot be found...Finish完成Processing failed for an unknown reason...000.000.00dd/mm/yyyy1|0Export as Update Metadata field - Undefined未定義Exists - not exported已存在 - 未匯出Removing...移除中...Reading...讀取中...Writing...寫入中...Exported已匯出Write failed寫入失敗Read error讀取錯誤Are you sure you want to delete all selected activities?Delete刪除To %1 successful, %2 failed or skipped.DeletedProcessedMetadata Tag SetFailed to process activityBestRExhaustion Best R力竭最佳R值RRBest value for R in differential model for exhaustion point.在差分模型中之力竭點之最佳R值BestTime1000mBest 1000m1000m個人最佳minutesminBestTime100mBest 100m100m個人最佳minutesminBestTime10kmBest 10km10km個人最佳minutesminBestTime1500mBest 1500m1500m個人最佳minutesminBestTime15kmBest 15km15km個人最佳minutesminBestTime2000mBest 2000m2000m個人最佳minutesminBestTime200mBest 200m200m個人最佳minutesminBestTime20kmBest 20km20km個人最佳minutesminBestTime3000mBest 3000m3000m個人最佳minutesminBestTime30kmBest 30km30km個人最佳minutesminBestTime4000mBest 4000m4000m個人最佳minutesminBestTime400mBest 400m400m個人最佳minutesminBestTime40kmBest 40km40km個人最佳minutesminBestTime5000mBest 5000m5000m個人最佳minutesminBestTime500mBest 500m500m個人最佳minutesminBestTime50mBest 50m50m個人最佳minutesminBestTime800mBest 800m800m個人最佳minutesminBestTimeHalfMarathonBest Half Marathon半馬個人最佳minutesminBestTimeMarathonBest Marathon全馬個人最佳minutesminBikeScoreSkiba's stress score taking into account both the intensity and the duration of the training session, similar to BikeStress it can be computed as 100 * hours * (Relative Intensity)^2Skiba教授提出,類似BikeStress/TSS之壓力指標分數,考量訓練之強度及持續時間,基本算法為100乘以小時乘以相對強度的兩次方BikeStressTraining Stress Score takes into account both the intensity and the duration of the training session, it can be computed as 100 * hours * IF^2TSS訓練壓力指標分數,考量訓練之強度及持續時間,基本算法為100乘以小時乘以IF的兩次方BlankStateAnalysisPageActivities活動紀錄No files ?
Let's start with some data.沒有騎乘紀錄?
趕快來匯入些資料吧。Connect to cloud service and downloadCloud DownloadImport files from your disk or usb device由磁碟或隨身碟匯入檔案Import data匯入資料Download from serial device.從序列埠裝置下載。Download from device從裝置下載BlankStateDiaryPageDiary日記No ride ?
Let's start with some data.沒有騎乘紀錄?
趕快來匯入些資料吧。Import files from your disk or usb device由磁碟或隨身碟匯入檔案Import data匯入資料Download from serial device.從序列埠裝置下載。Download from device從裝置下載BlankStateHomePageTrends趨勢No ride ?
Let's start with some data.沒有騎乘紀錄?
趕快來匯入些資料吧。Import files from your disk or usb device由磁碟或隨身碟匯入檔案Import data匯入資料Download from serial device.從序列埠裝置下載。Download from device從裝置下載BlankStatePageDon't show this next time.不再顯示本頁Close關閉BlankStateTrainPageTrain訓練No devices or workouts ?
Let's get you setup.沒有裝置或是訓練課表?
來設定吧!Find and add training devices.尋找及新增訓練裝置Add device新增裝置Find and Import your videos and workouts.尋找並匯入影片及訓練課表Scan hard drives掃描硬碟Download workout files from the Erg DB.從Erg DB下載訓練課表Download workouts下載訓練課表CP2ModelClassic 2 ParameterCP3ModelMorton 3 ParameterCPExpBelow CP Work作功低於CPkJkJBelow CP Work is the amount of kJ produced while power is below CP.作功低於CP即功率在CP以下之作功千焦耳量。CPPageUpdate更新++--Review...Changed power estimates are availableAdd新增Delete刪除Def定義From Date起始日期Critical Power臨界功率AeTPFTPFTPW'W'PmaxPmaxMMM d, yyyyyyyy年M月d日Short簡稱Use CP for all metrics在所有計測中使用CPManual手動Semi-Automatic (CP2)Semi-Automatic (CP3)Semi-Automatic (Extended)Use FTP for Coggan metrics在Coggan計測中使用FTPWJJStart Date起始日期Model FitLong全名From Watts最低瓦Review range starting on %1Current目前值Estimate預估Accept接受🗹Estimate and settings <b>match</b>☐Estimate and settings <b>differ</b>⏲Range is %1 days older than closest estimateRange is %1 days younger than closest estimate∅No estimate availableNew range from estimateThe proposed value for AeTP is a very rough estimate, assuming %1 % of CP. Usually it is determined by a<ul><li>Metabolic test</li><li>Lactate ramp test</li><li>Run / Cycling ‘conversational’ test</li><li>Run Decoupling test</li></ul>Updating FTP internally to match CPYour selected model does not deliver values for<ul><li>FTP, using CP instead</li></ul>Your selected model does not deliver values for PMax, using default value of %1 W insteadYour selected model does not deliver values for<ul><li>FTP, using CP instead</li><li>PMax, assuming a default of %1 W</li></ul>Critical Power (CP)Aerobic Threshold Power (AeTP)Functional Threshold Power (FTP)Anaerobic Work Capacity (W')Maximum Power (PMax)Manual rangeMaximum of 10 zones reached.僅允許設定10個區間。New新建New (%1)新建 (%1)CPPlotInterval Length區段長Average Power (watts)平均輸出功率 (w)Percent of Best最佳值之百分比Total work總作功kJkJPower輸出功率wattswVeloclinic PlotVeloclinic圖表JJCadence迴轉數rpmrpmHeartrate心率bpmbpmWatts delta瓦特差watts/sw/sCadence delta迴轉數差rpm/srpm/sTorque delta扭矩差nm/snm/sHeartrate delta心率差bpm/sbpm/sAcceleration加速率m/s/sm/s/sSpeed速度kphkphPedal Force踏板施力nmnmIso PowerIsoPowerAltitude Power等高功率xPowerxPowerWatts per kilogram每公斤的瓦特數w/kgw/kgWatts per lb每磅的瓦特數w/lbw/lbAltitude Power per kilogram每公斤的等高功率Altitude Power per lb每磅的等高功率VAMVAMm/hourm/hrPower (W)功率 (W)W'W'%1 kJ%1 kJn/a無CP臨界功率%1 w%1 wPmaxPmax%1 J/kg%1 J/kg%1 w/kg%1 w/kgD'D'Power Index功率指數%1 mph%1 mph%1 Percent%1 %%1 Power Index%1 功率指數min/500mmin/100m {500m?}
%1 m
%1 m
%1 yd
%1 yd
%1 km
%1 km
%1 mi
%1 mi%1 km%1 km%1 mi%1 mi%1 %2%1 %2Energy/Time 能量/時間 No Model無模型Percentile百分位數mmydydCV臨界速度%%%1 kph%1 kphVmaxVmaxPercent of Best / Heat Activities最佳/類近紀錄之百分比Heat Activities類近紀錄Activities活動紀錄ddd MMM d, yyyy hh:mmddd, d日 M月 yyyy年 hh:mmBests最佳成績
ddd, dd MMM yyyyyyyy年M月d日, ddd%10 %%10 %CPWPK60 min Peak WPK60min最高wkg60 min Peak Power relative to Athlete Weight.60min最高功率輸出時之功率體重比CVPageUpdate更新++--Add新增Delete刪除Def定義Start Date起始日期New rangeCritical Velocity (CV)Aerobic Threshold (AeT)From Date起始日期Critical Velocity臨界速度Aerobic ThresholdMMM d, yyyyyyyy年M月d日Short簡稱Long全名From從Maximum of 10 zones reached.僅允許設定10個區間。New新建New (%1)新建 (%1)CalDAVMissing Preferences喜好設定不存在CalID or CalDAV Url is missing in preferences缺少CalID或CalDAV網址設定CalDAV REPORT url errorCalDAV REPORT網址錯誤CalDAV Calendar API reply errorCalDAV日曆API回覆錯誤HTTPHTTPSSL error(s) has occurred: %1SSL發生錯誤: %1CalDAV Calendar url errorCalDAV日曆網址錯誤CalDAVCloudWeb Calendar using iCal format as a web resource適用iCal格式的網路日曆Generic CalDAV Calendar such as Apple iCloud calendar如Apple iCloud日曆等通用 CalDAV 日曆CalendarDownloadCalendar Data Download下載行事曆資料Problem Saving Calendar Download無法儲存下載之行事曆File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀Remote Calendar not available, reverting to cached workouts.雲端日曆無法使用,將恢復原有訓練課表配置。ChartBarNew ChartImport Chart ...Download Chart...下載圖表...ChartSettingsChart Settings圖表設定Done結束ChooseCyclistDialogChoose an Athlete選擇運動員&New...新建(&N)...&Open開啟(&O)&Cancel取消(&C)Delete刪除Delete athlete刪除運動員You are about to delete %1你即將刪除%1This cannot be undone and all data will be permanently deleted.
Are you sure?此動作無法恢復,所有資料將被永久刪除。
要繼續嗎?ClimbRatingClimb Rating爬坡等級According to Dan Conelly: Elevation Gain ^2 / Distance / 1000, 100 is HARDDan Conelly提出:爬升高度的二次方除以距離除1000,數值在100以上為高難度CloudDBAcceptConditionsDialogGoldenCheetah CloudDB - Terms and ConditionsGoldenCheetah CloudDB 使用規範<b><big>Please read terms and conditions carefully before accepting !</big></b><b><big>請在接受前詳閱使用規範!</big></b><center><b>What is GoldenCheetah CloudDB</b><br>You have requested a function with shares or retrieves GoldenCheetah configuration artifacts like chart definitions, worksouts, custom metrics,... in a cloud based data storage extension which is running on Google App Engine in a data center of variable location as provided by Google and/or choosen by the GoldenCheetah team.<br><center><b>License and Privacy Rules for Sharing Artifacts</b><br>By sharing an artifact to CloudDB you agree to provide it under <a href="http://creativecommons.org/licenses/by/4.0/" target="_blank">Creative Common License 4.0</a>. When sharing you are asked to enter a 'Nickname' and an 'Email-Address' which are stored together with a unique identifier (which is automatically created for your athlete) in the CloudDB. This data is only used to support the CloudDB service and will not be disclosed or shared for other purposes (e.g. advertisement).<br><center><b>License and Rules for Importing Artifacts</b><br>By importing an artifact from CloudDB you accept the license agreement <a href="http://creativecommons.org/licenses/by/4.0/" target="_blank">Creative Common License 4.0</a>. Any artifcats are provided as-is without warranty of any kind, either expressed or implied, including, but not limited to, the implied warrenty of fitness for a particular purpose. The entire risk related to the quality of the artifact is with you. There is no liability regarding damages to your data trough the use of any of the artifacts and there will be no quality check/ensurance by the GoldenCheetah team for the provided artifacts.<br><center><b>CloudDB Service Availability Disclaimer</b><br>The service is provisioned free-of-charge to the users of GoldenCheetah. There is no guarantee nor service level agreement on the 7x24 availabiliy of CloudDB services. The GoldenCheetah team has the right to delete artifacts from the CloudDB at any time and without prior notice to the providing user (e.g. due to quality issues, or due to limitations in storage capacity). The GoldenCheetah team has the right to suspend or stop the complete service or parts of the service at any time and without prior notice to the users.<br><center><b>CloudDB Service Rules</b><br>The use of the service is exclusively granted to GoldenCheetah users - and the only permitted way to access any of the artifacts is through the GoldenCheetah application. Any attempt to access CloudDB data directly is forbidden and will either be blocked or may even end in suspending or stopping the service in general.<br><center><b>Accept or Reject</b><br>By pressing 'Accept the rules and conditions of CloudDB' you confirm that you have read and fully understood the above text and you agree to follow all of these. This decision is recorded so that you will not asked again when using CloudDB related functions. <br><br>If you are not sure you can choose 'Reject and don't use CloudDB'. In this case this agreement request will appear again whenever you request to use a CloudDB related function in GoldenCheetah.<br><center><b>CloudDB Source Code</b><br>The source code of CloudDB is published under 'GNU AFFERO GENERAL PUBLIC LICENSE Version 3' here: <a href= "https://github.com/GoldenCheetah/CloudDB" target="_blank">CloudDB Repository</a><br><br><center> <b>GoldenCheetah CloudDB是什麼</ b> <br>本功能將提供基於Google App Engine資料存儲的雲服務,將GoldenCheetah的各項配置資料如圖表定義,訓練課表,自定義計測量等等在雲端共享或進行搜尋。此雲服務的存儲地點位於Google和/或由GoldenCheetah團隊選擇,無固定位置的數據中心。<br> <center> <b>共享配置資料的授權和隱私規則</ b> <br>在CloudDB分享資料,即代表您同意以<a href="http://creativecommons.org/licenses/by/4.0/" target="_blank"> Creative Common License 4.0 </a>授權使用。分享時,系統會要求您輸入“暱稱”和“電子郵件地址”,此資料會與您的運動員識別碼(由自動為您創建)於CloudDB一起存儲。這些資料僅用於支持CloudDB服務,不會為了其他目的而公開或共享(例如廣告)。<br> <center> <b>匯入配置資料的授權和規則</ b> <br>通過匯入來自CloudDB的配置資料,您接受<a href="http://creativecommons.org/licenses/by/4.0/" target="_blank"> Creative Common License 4.0 </a>的許可協議。任何配置資料均按原樣(as-is)提供,不附帶任何明示或暗示的擔保,包括但不限於對特定用途的適用性的隱含保證。您需接受與配置資料質量相關的所有風險,且需放棄所有對您的數據造成的損害追溯責任的權利。GoldenCheetah團隊不會對所提供的匯入配置進行質量檢查/保證。<br> <center> <b> CloudDB服務可用性免責聲明</ b> <br>此服務是免費為GoldenCheetah用戶提供的。不保證或提供任何服務級別,以確保CloudDB隨時7x24小時服務可用。 GoldenCheetah團隊有權隨時從CloudDB中刪除檔案(例如由於質量問題或存儲容量限制),而無需事先通知用戶。 GoldenCheetah團隊有權隨時暫停或停止整個服務或部分服務,恕不另行通知。<br> <center> <b> CloudDB服務規則</ b> <br>此服務僅提供予GoldenCheetah用戶 - 並且僅允許使用者通過GoldenCheetah應用程式存取任何配置資料。任何直接訪問CloudDB數據的嘗試都是被禁止的,且會被阻止,甚至可能會導致服務暫停或永久停止。<br> <center> <b>接受或拒絕</ b> <br>按“接受” CloudDB的使用規範'您確認已閱讀並完全理解上述文本,並且您同意遵循所有這些。此決定將被記錄,以便在使用CloudDB相關功能時不會再次詢問。 <br> <br>如果您目前尚不確定,可以選擇“拒絕,不要使用CloudDB”。在此情況下,每當您在GoldenCheetah中使用CloudDB相關功能時,此協議請求將再次出現。<br> <center> <b> CloudDB源代碼</ b> <br> CloudDB的源代碼以GNU AFFERO GENERAL PUBLIC LICENSE版本3'授權在這裡發布:<a href= "https://github.com/GoldenCheetah/CloudDB" target="_blank">CloudDB程式庫</a> <br> <br>Accept the rules and conditions of CloudDB接受CloudDB使用規範Reject and don't use CloudDB拒絕,不要使用CloudDBCloudDBAcceptTelemetryDialogGoldenCheetah - Storage of User LocationGoldenCheetah - 使用者位置紀錄<center><b>GoldenCheetah User Location Data</b><br>We want to start collecting data about where our active users are located and which operating system and GoldenCheetah version they are using. The collection is done via our Cloud DB. We would like to use your IP address to determine your location and count how often you are using GoldenCheetah. Besides the data mentioned we do not store any personal information in our Cloud DB. <br><br><b>Can we please record your location, OS and GoldenCheetah version ?<center> <b> GoldenCheetah使用者位置資料</b> <br>我們希望收集GoldenCheetah使用者所在位置以及他們使用的操作系統和GoldenCheetah版本的數據。 將透過Cloud DB系統收集您的IP地址,以獲取您的位置並計算GoldenCheetah的使用頻率。 除了以上提到的資料,我們不會在Cloud DB中存儲任何個人信息。 <br> <br> <b>我們可以記錄您的位置,操作系統和GoldenCheetah版本嗎?No拒絕Yes接受CloudDBChartListDialogFirst最前Next %1往後%1筆Prev %1往前%1筆My Charts我的圖表All全部Curated Only僅顯示編集Uncurated Only僅顯示未編集Any Sport任何運動種類Any Language任何語言Search Keyword搜尋關鍵字Select charts to download選擇圖表下載unknown末知Trends趨勢Activities活動紀錄Diary日記Train訓練All Views所有檢視方式Chart requires 'R'本圖表需要利用R套件The chart your are downloading requires 'R' to be installed and activated for GoldenCheetah to show any graphics. Either 'R' is not activated in the preferences, or not even installed.<br><br> Please ensure 'R' is installed and activated to be able to use this chart.你正在下載之圖表需要安裝並於GoldenCheetah啓用R套件 才能顯示資料。<br><br>請確保套件已安裝及啓用再嘗試使用本圖表。Chart requires 'Python'本圖表需要利用Python套件The chart your are downloading requires 'Python' to be installed and activated for GoldenCheetah to show any graphics. Either 'Python' is not activated in the preferences, or not even installed.<br><br> Please ensure 'Python' is installed and activated to be able to use this chart.你正在下載之圖表需要安裝並於GoldenCheetah啓用Python套件 才能顯示資料。<br><br>請確保套件已安裝及啓用再嘗試使用本圖表。Chart Maintenance圖表維護Do you really want to delete this chart definition ?是否真的要刪除此圖表定義?Delete selected chart刪除選中的圖表Edit selected chart編輯選中的圖表Close關閉Showing %1 to %2 of %3 charts for %4 / Total uploaded %5%4共%3項,目前顯示第%1至%2項/已上載%5項Download selected chart(s)下載選中的圖表Set selected chart 'Curated'將選中的圖表設定為編集Chart maintenance - Edit or Delete your Charts圖表維護 - 編輯或刪除圖表Curator chart maintenance - Curate, Edit or Delete Charts編集者圖表維護 - 編集,編輯或刪除圖表<h3>%1</h3><h4>Last Edited At: %2 - Creator: %3</h4>%4<h3>%1</h3><h4>最後修改: %2 - 編集者: %3</h4>%4Reset Search搜尋重置CloudDBChartObjectDialogChart Name圖表名稱<Chart Name><圖表名稱>Sport運動種類Language語言Nickname暱稱E-Mail電郵地址Version Details版本資訊Creator UUid建立者ID<Enter the description of the chart here><輸入圖表描述>Upload上傳Upload Chart上傳圖表Please enter a valid chart name with min. 5 characters length.請輸入正確圖表名稱,至少需有5個字元。Please enter a nickname for this athlete.請輸入運動員暱稱。Please enter a valid e-mail address.請輸入正確電郵地址。Please enter a sensible chart description.請輸入圖表描述。Cloud Upload雲端上傳Do you want to upload this chart definition ?是否要上傳此圖表定義?Cancel取消CloudDBChartShowPictureDialogClose關閉CloudDBCommonCloudDBCloudDBUsage has exceeded the free quota - please try again later.用量過高,系統繁忙中 請晚點再試。Technical problem with CloudDB - please try again later.CloudDB技術問題 請晚點再試。Authorization problem with CloudDB - please try again later.CloudDB登入授權問題 請晚點再試。Technical problem with CloudDB - response code: %1 - please try again later.CloudDB技術問題%1 請晚點再試。HTTPHTTPSSL error(s) has occurred: %1SSL 發生錯誤: %1CloudDBCuratorClientCloudDBCloudDBTechnical problem reading curator list - please try again later讀取編集者名單時發生技術問題 請晚點再試。CloudDBStatusClientCloudDBCloudDBTechnical problem reading latest status - please try again later讀取目前狀態時發生技術問題 請晚點再試。Technical problem reading status text - please try again later讀取狀態文字檔時發生技術問題 請晚點再試。CloudDB StatusCloudDB狀態<b><big>Ok</big></b><br><br>All Services should be operational - no problems known.<b><big>正常運作</big></b><br><br>所有服務正常運作中。<b><big>Limited Service</big></b><br>Sorry - some CloudDB services are not operational.<br><br><b>More information:</b><br>%1<b><big>部分服務</big></b><br><br>對不起,未能提供所有CloudDB服務<br><br><b>更多資訊:</b><br>%1<b><big>Service outage</big></b><br>Sorry - CloudDB services are not operational.<br><br><b>More information:</b><br>%1<b><big>服務異常</big></b><br><br>對不起,CloudDB服務異常<br><br><b>更多資訊:</b><br>%1CloudDBUpdateAvailableDialogGoldenCheetah - Check for new versionsGoldenCheetah - 新版本檢查<b><big>New versions of GoldenCheetah are available</big></b><b><big>有新版本GoldenCheetah可下載</big></b><b><big>A new version of GoldenCheetah is available</big></b><b><big>有新版本GoldenCheetah可下載</big></b>Release: %1 正式發佈版本: %1 Release Candidate: %1 最終測試版本: %1 Development Release: %1 開發者版本: %1 Do not show again不再顯示Show again in %1 days%1 日後再提醒我CloudDBUserMetricListDialogFirst最前Next %1往後%1筆Prev %1往前%1筆My UserMetricsAll全部Curated Only僅顯示編集Uncurated Only僅顯示未編集Any Language任何語言Search Keyword搜尋關鍵字Download selected usermetric(s)Close關閉Delete selected usermetricEdit selected usermetricSet selected usermetric 'Curated'UserMetric maintenance - Edit or Delete your UserMetricsCurator usermetric maintenance - Curate, Edit or Delete UserMetricsSelect usermetrics to downloadShowing %1 to %2 of %3 usermetrics / Total uploaded %4%1<h4>Last Edited At: %2 - Creator: %3</h4>UserMetric MaintenanceDo you really want to delete this usermetric definition ?Reset Search搜尋重置CloudDBUserMetricObjectDialogUserMetric Name<UserMetric Name>Language語言Nickname暱稱E-Mail電郵地址Version Details版本資訊Creator UUid建立者ID<Enter the description of the usermetric here>Upload上傳Cancel取消Upload UserMetricPlease enter a valid usermetric name with min. 5 characters length.Please enter a nickname for this athlete.請輸入運動員暱稱。Please enter a valid e-mail address.請輸入正確電郵地址。Please enter a sensible usermetric description.Cloud Upload雲端上傳Do you want to upload this usermetric definition ?CloudServiceexpected compressed activity file.應為活動紀錄壓縮檔案None無CloudServiceAutoDownloadWidgetDownloading下載中Checking檢查中Last 30 days過去30日CloudServiceDialogFolder檔案夾Name名稱Type種類Modified已編輯Create Folder新增檔案夾Cancel取消Open開啟d MMM yyyyyyyy年M月d日CloudServiceSyncDialogSynchronise 同步 Sync with 同步Unable to connect, check your configuration in preferences.無法連接,請檢查你的配置設定。Download下載Upload上傳Synchronize同步From:從:To:至:Refresh List刷新列表Close關閉Select all選擇所有Workout Name訓練課表名稱Date日期Time時間Exists已存在Status狀態Workout Id訓練課表IDFile檔案Duration持續時間Distance距離Keep all do not delete全部保留不刪除Keep %1 but delete Local保留%1 刪除本地檔案Keep Local but delete %1保留本地檔案 刪除%1Source來源Action動作Initial未開始Overwrite existing files覆寫現有檔案One of your activities has unsaved changes.1個活動紀錄尚未存檔。%1 of your activities have unsaved changes.%1個活動紀錄尚未存檔。Changes in activities which are not saved, will not be synchronized.
This may lead to inconsistencies between your local GoldenCheetah activities and the uploaded activities. We recommend to save the changed activities before proceeding.活動紀錄中未保存的修改將不會被同步。
這可能導致本地活動紀錄和上傳的活動紀錄不一致,建議在繼續前保存修改的活動紀錄。kmkmmimiMMM d, yyyyyyyy年M月d日Abort停止%1 of %2 selected已選中%2個中的%1個Processed %1 of %2已處理%2個中的%1個Downloading下載中Uploading上傳中Parse failure解譯失敗Sync complete同步完成Processed %1 of %2 successfully成功處理%2個中的%1個File exists檔案已存在Downloaded %1 of %2已下載%2個中的%1個Downloads complete下載完成Downloaded %1 of %2 successfully成功下載%2個中的%1個Aborted已停止Saved已儲存Uploaded %1 of %2已上傳%2個中的%1個Uploads complete上傳完成Uploaded %1 of %2 successfully成功上傳%2個中的%1個Completed.完成。CloudServiceUploadDialogUploading %1 bytes...正在上傳%1位元組...Cancel取消Upload to 上傳至The activity you want to upload has unsaved changes.上傳之活動紀錄有未儲存的修改。Unsaved changes in activities will be uploaded as well.
This may lead to inconsistencies between your local activities and the uploaded activities if you do not save the activity in GoldenCheetah. We recommend to save the changed activity before proceeding.活動紀錄中未儲存的修改也將會被上傳。
若未在本地儲存修改,這可能導致本地活動紀錄和上傳的活動紀錄不一致。建議在繼續前儲存修改的活動紀錄。Upload Failed上傳失敗Unable to upload, check your configuration in preferences.無法上傳,請檢查你的配置設定。OKOKColorButtonChoose Color選擇顏色ColorsPageColor色彩Select選擇Activity Scrollbar活動紀錄捲軸Activity Headings活動紀錄表頭Line Width線寬Font字型Font Scaling文字大小Antialias反鋸齒Swatch色卡Name名稱Search搜尋GroupMac styled FormsApply Theme套用主題The quick brown fox jumps over the lazy dogTheme主題Colors色彩ColumnChooserColumn Chooser列選擇器ComparePaneAthlete運動員Date日期Time時間seconds秒Interval區段From從To至Date Range日期範圍ComputrainerControllerCannot Connect to Computrainer無法與Computrainer連接ConfigDialogGeneral一般Appearance外觀Data Fields資訊欄位Metrics計測量Intervals區段MeasuresTraining訓練Close關閉Save儲存Reset Appearance to DefaultsReset Measures to DefaultsYou changed the location of the athlete library你已改變了運動員資料庫位址This is where all new athletes and their files will now be stored.
Current athlete data will no longer be available and GoldenCheetah will need to restart for the change to take effect.
Do you want to apply and restart GoldenCheetah?這裡是存放檔案的新位址,需要重新啟動GoldenCheetah讓變更生效。No, Keep current不,保持現有設定Yes, Apply and Restart是的,套用並重新啟動Preferences喜好設定Options選項CredentialsPage++--Edit編輯Add新增Delete刪除Service服務Description説明CriticalPowerCritical Power臨界功率Critical Power (CP) configured in Power Zones.功率區間設定所基於之臨界功率 (CP)CriticalPowerWindowno data無資料Percentage of Best最佳值之百分比Show Heat顯示次數Delta compare差值比較as percentage以百分比表示Critical Power 臨界功率 Basic基本Export Chart Data...匯出圖表影像...Filter過濾器Date range日期範圍Data series資料序列Activity Mean Max活動平均最大值Activity Centile活動百分比值No Activity沒有活動Current Activity目前活動紀錄None無Model模型Data Series資料序列Chart Settings...圖表設定...Zone Shading區間上色Show Power Profile顯示功率全覽Show grid顯示格點Show Performance Tests顯示能力測驗Show Bests顯示最佳成績Filter Unique Bests過濾單一最佳值Show Sustained Efforts顯示持續作功區段Show as Power Index以功率指數顯示Show as percentage以百分比顯示Show curve heat顯示符合曲線次數Show curve heat by date按日期顯示符合曲線次數Shade Intervals區段填色Show time scale linear顯示線性時間軸2 parameter雙參數3 parameter三參數Extended CPCP附加運算Multicomponent多項組成Ward-SmithWard-SmithEnvelope包覆Least Squares (LMA)最小二乘法 (LMA)Linear Regression (Work)線性回歸 (作功)Curve Fit擬合曲線MMP bestsMMP最佳Performance tests能力測驗Data to fit擬合資料CP and W' DecayCP及W'衰減Search Interval搜尋區段(seconds)(s)Anaerobic無氧Aerobic有氧Short anaerobic短程無氧Long aerobic長程有氧Exponential累升Variant異位算法Linear feedback線性回饋Regeneration恢復Value値Rank排名W'W'0 kJ0 kJn/a不適用CP臨界功率0 w0 wPmaxPmaxEndurance Index耐力指數Motor Unit Model機動元模型Power功率Watts per Kilogram每公斤的瓦特數xPowerxPowerIso PowerIsoPowerHeartrate心率Speed速度Acceleration加速率Power %1功率 %1Cadence %1迴轉數 %1Torque %1扭矩 %1Heartrate %1心率 %1Cadence迴轉數Torque扭矩VAMVAMaPoweraPoweraPower per Kilogram每公斤的aPowerWork作功Veloclinic PlotVeloclinic圖表Unknown未知Save Best Data as CSV匯出最佳記錄至CSVno date無日期MM/dd/yyyyyyyy/M/dCustomMetricsPageSymbol符號Name名稱Edit編輯Export匯出Import匯入Upload上傳Download下載++--Add新增Delete刪除User MetricsDuplicate Symbol: %1, one metric will be discardedDuplicate Name: %1, one metric will not be acessible in formulasAre you sure you want to delete this metric?你想要刪除此計測單位:Remove移除Export MetricGoldenCheetah Metric File (*.gmetric)Select Metric file to importGoldenCheetah Metric Files (*.gmetric)Import MetricNo Metric file selected!No Metric found in the selected file!Download MetricNo valid Metric found!CyclingAnalyticsAccount is not configured.未設定帳號。You must authorise with Cycling Analytics first必須先授權Cycling AnalyticsTitle名稱Notes筆記Completed.完成。Network Error - Upload failed.網路異常 - 上傳失敗。Cycling AnalyticsCycling AnalyticsSync with the power focused cycling site.與功率訓練主導之騎車網站同步。DanielsEquivalentPowerDaniels EqPDaniels EqPwattswDaniels EqP is the constant power which would produce equivalent Daniels Points.Daniels EqP是能產生同等Daniels指數的定量功率。DanielsPointsDaniels PointsDaniels指數Daniels Points adapted for cycling using power instead of pace and assuming VO2max-power=1.2*CP, normalized to assign 100 points to 1 hour at CP.Daniels指數基於功率而非速率,其計算係假設VO2max功率為臨界功率之1.2倍,而每一小時之臨界功率輸出等同100點。DataFiltermalformed expression.表達式格式有誤。DataFilterEditWarning: sample() is slow -- update code to use samples()DataOverviewItemsecondsExport Table DataData malformed or not available.Export Table Data to CSVDateSettingsEditCurrent selection目前選擇Current selection thru today目前選擇至今From從to today至今日Between介於and及Last過去days天weeks週months月years年This此week週month月year年prior以前DaumControllerCannot Connect to Daum無法連接DaumDaysScaleDrawMon星期一Tue星期二Wed星期三Thu星期四Fri星期五Sat星期六Sun星期日DefaultsPage++--Add新增Delete刪除Up上Down下Field欄位Value數値Linked field連結欄位Default Value預設值New新建New (%1)新建 (%1)DeletePointCommandRemove Point刪除資料點DeletePointsCommandRemove Points刪除資料點Remove XDATA Points刪除XData資料點Devicecleanup is not supported未支援清空功能DevicePageAdd新增Delete刪除++--DeviceTypesANT+ devices and Trainers such as Kickr, NEO, Muin, SRM and Powertap power meters, Heart rate belts, speed or cadence meters via a Garmin ANT+ USB1 or USB2 stick通過Garmin ANT+ USB1或USB2接收的ANT+設備和訓練台,如Kickr,NEO,Muin,SRM和Powertap功率計,心率帶,速度或踏頻傳感器ANT+ devices and Trainers such as Kickr, NEO, Muin, SRM, Powertap or Quarq power meters, Heart rate belts, speed or cadence meters via a Garmin ANT+ USB1 or USB2 stick通過Garmin ANT+ USB1或USB2接收的ANT+設備和訓練台,如Kickr,NEO,Muin,SRM和Powertap或Quarq功率計,心率帶,速度或踏頻傳感器Bluetooth Low Energy devices such as KK Inride, Stages PM, Blue HR and Blue SC低功率藍芽裝置例如KK Inride, Stages功率計,Blue HR及Blue SCRacermate Computrainer Lab or Pro bike trainer with the handlebar controller connected via a USB adaptor or directly connected to a local serial port.Racermate Computrainer Lab或Pro版訓練台,其把手控制器經USB轉接器或直接連結至電腦序列埠。Monark USB device Monark USB 裝置 Kettler serial device Kettler 序列埠裝置 Kettler Racer serial device Kettler Racer 序列埠裝置 Ergofit serial device Daum Serial Device Daum 序列埠裝置 Tacx Fortius bike trainer with the handlebar controller connected to a USB port. Please make sure you have device firmware to hand.Tacx Fortius訓練台,其把手控制器經USB埠連接。請準備裝置的驅動程式以備使用。Tacx iMagic bike trainer with the handlebar controller connected to a USB port.Tacx iMagic訓練台,其把手控制器經USB埠連接。Testing device used for development only. If an ERG file is selected it will replay back, with a little randomness thrown in.僅用於開發之測試模式。若選擇一ERG文件,會模疑實際騎乘顯示。DialWindowData Series資料序列Smooth (secs)平滑化(s)DiarySidebarCalendar行事曆dddd MMMM dM月d日ddddWeek Commencing %1%1 起始一週DiaryViewCompare Activities and Intervals活動紀錄及區段比較DirectoryPathWidgetBrowse瀏覽DistanceSwimDistance Swim游泳距離mmydydTotal Distance in meters or yards以公尺或碼計算之總距離DonutOverviewItemSport運動種類DownloadRideDialog&Download下載(&D)&Rescan重新掃描(&R)&Cancel取消(&C)Select port:Port選擇:Select device type:裝置類別選擇:&Close關閉(&C)Info:資訊:No devices found. Make sure the device
unit is plugged into the computer,
then click "Rescan" to check again.未發現裝置。
請確認裝置已與電腦連結,
並按下"重新掃描"。Click Download to begin downloading.按下載以啓動下載。, then click Download.,然後按下載。Getting list ...正在下載清單...Get list failed清單下載失敗The activity %1 could not be converted to GoldenCheetah .JSON file format.活動紀錄%1無法轉換成GoldenCheetah JSON格式。Starting Download ...下載啓動中...Download cancelled下載已取消File %1 has no valid timestamp, falling back to 'now'%1 檔案裡的時間戳無效,預設為現在。Activity Already Downloaded相同活動紀錄已下載The activity starting at %1 appears to have already been downloaded. Do you want to overwrite the previous download?已有相同於%1開始之活動紀錄。是否覆蓋前次下載的紀錄?Failed to rename %1 to %2無法重新命名%1至%2.JSON conversion error: file %1.JSON轉換錯誤:檔案%1Download completed下載完成Cleaned data清空資料Warning(s):
警告:
Download Data下載資料&Erase Data清除資料(&E)
You may need to (re)install the FTDI or PL2303 drivers before downloading.
下載前可能需安裝或重新安裝FTDI或PL2303驅動程式。Error Loading Device Drivers驅動程式載入失敗Cancel clicked by user.使用者取消。Download failed下載失敗Failed to remove existing file %1: %2移除原有的檔案%1時發生錯誤:%2failed to rename %1 to %2無法重新命名%1至%2Failed to rename %1 to %2: %3無法重新命名%1至%2:%3&Overwrite覆寫(&O)&Skip略過(&S)skipped file %1已略過檔案%1Error錯誤DropboxProblem accessing Dropbox data無法存取Dropbox資料You must authorise with Dropbox first必須先授權DropboxParsing Error: %1解譯失敗: %1Completed.完成。Network Error - Upload failed.網路異常 - 上傳失敗。DropboxDropboxSync activities via your cloud storage.與雲端空間同步活動紀錄。EOAEffect of Altitude高原影響Relationship between altitude adjusted power and recorded power等高調整功率與實測功率之關係EditChartDialogEnter Chart Name輸入圖表名稱&OKOK(&O)&Cancel取消(&C)Entry Error輸入錯誤Name is blank未輸入名稱Chart already exists圖表已存在EditFixPyScriptDialogEdit Python FixName:名稱:Run跑步Name名稱Save and closeCancel取消The Python Fix has been modified.Do you want to save your changes?Please specify a name for the Python Fix.The Python Fix name may not contain any of the following characters: %1A Python Fix with that name exists already. Please choose another name.EditIntervalDialogEdit Interval編輯區段Performance Test能力測驗&OKOK(&O)&Cancel取消(&C)EditMetricDetailDialogName名稱Axis Label / Units軸標籤/單位Curve Settings曲線設定Estimate %1 %2 Power估計%1 %2功率Endurance Index耐力指數Vo2Max EstimateVO2max預估Metric公制Best最佳Estimate預估PMCPMCFormula計算公式Measure測量值Performance個人表現BanisterBanistersecondssminutesminhourshrPeak峰值Absolute絕對值Per Kilogram每公斤Total總量Running Total跑步總量Average平均Low低值Aggregate:總量:# type in a formula to use
# for e.g. BikeStress / Duration
# as you type the available metrics
# will be offered by autocomplete
# 輸入計算公式
# 例如BikeStress/Duration
# 鍵入計測量時
# 系統會提示可用選項Weekly Best Performances每週最佳表現Submaximal Weekly Best臨界每週最近表現Performance Tests能力測驗Short Term Stress (STS/ATL)短期壓力 (STS/ATL)Long Term Stress (LTS/CTL)長期壓力 (LTS/CTL)Stress Balance (SB/TSB)壓力平衡 (SB/TSB)Stress Ramp Rate (RR)壓力升率 (RR)Stress Type壓力類型Negative Training Effect (NTE)負向訓練反應 (NTE)Positive Training Effect (PTE)正向訓練反應 (PTE)Performance (Power Index)個人表現 (功率指數)Predicted CP (Watts)預估CP (w)Curve Type曲線種類Perf. Metric能力計測量Metadata Field附加參數欄位PMC metricPMC計測量Measure Group量測組別Measure Field量測欄位Filter過濾器Style風格Bar長條Line線Sticks蠋Dots點Stack堆疊Symbol符號None無Circle圓Square方Diamond鑽Triangle三角Cross交叉Hexagon六角Star星Color色彩Fill curve填滿曲線Data labels資訊標籤Highlight Highest標記最高值Highlight Lowest標記最低值Highlight Outliers標記異值Baseline基準Smooth Curve平滑化曲線No trend Line無趨勢曲線Linear Trend線性趨勢Quadratic Trend二次趨勢Moving Average移動平均Simple Average簡單平均Ignore Zeros&OKOK(&O)&Cancel取消(&C)Peak %1%1峰值 second s minute min hour hr%1 - %2%1 - %2Performances個人表現Power Index功率指數Performances_%1_%2_%3個人表現 %1 %2 %3EditNamedSearchesManage Filters過濾器管理Name名稱Filter過濾器Add新增Update更新Query查詢Up上Down下Delete刪除Close關閉EditPhaseDialogEdit Date Range編輯日期範圍Name名稱Type種類From從To至Starting LTS初始LTSLowest SB最低SBPhase階段Prep預備階段Base基礎階段Build建設階段Camp訓練營&OKOK(&O)&Cancel取消(&C)EditSeasonDialogEdit Date Range編輯日期範圍Name名稱Type種類From從To至Starting LTS起始LTSLowest SB最低SBSeason季度Cycle週期Adhoc臨時Absolute StartRelative StartDuration before EndWeeks agoMonths agoYears agoYears年Months月Days日Absolute EndRelative EndDuration after StartYear to DateUp to current day and month&OKOK(&O)&Cancel取消(&C)As of today%1 - %2%1 - %2dd MMM yyyyyyyy年M月d日<b>WARNING</b> Start is after end, season will be emptyEditSeasonEventDialogEdit Event編輯賽事Name名稱Date日期Priority優先等級Description説明&OKOK(&O)&Cancel取消(&C)EditUserAxisDialogEdit Axis&OK&Cancel取消(&C)Units單位Logarithmic ScaleType種類Fixed from to 至 RangeSmoothingNone無Day日Week週Month月Year年Group By依群組EditUserDataDialogUser Data Series使用者資料序列# type in a formula to use
# for e.g. BikeStress / Duration
# as you type the available metrics
# will be offered by autocomplete
# 輸入計算公式
# 例如BikeStress/Duration
# 鍵入計測量時
# 系統會提示可用選項Name名稱Units單位Formula計算公式Zone string區間文字Color色彩&OKOK(&O)&Cancel取消(&C)Choose Metric Color指定計測量顏色EditUserMetricDialogUser Defined Metric自定義計測量Symbol符號Name名稱Metric Units公制單位Imperial Units英制單位Description説明Type種類Total總量Average平均Peak峰值Low低值Conversion Factor轉換系數Conversion Sum轉換疊加數Precision精度Aggregate Zero計算零值Time時間Program程式Evaluates運算Metric公制Imperial英制OKOKCancel取消Test測試User MetricSymbol already in use by a Builtin metricEditUserSeriesDialogEdit Data Series&OK&Cancel取消(&C)GroupSeries NameY unitsX unitsSumAverage平均Peak峰值Low低值Running Total跑步總量Mean Square RootStd DeviationAggregateNone無SolidDashedDotDash DotFast GraphicsShow on LegendShow Data LabelsLine StyleCircle圓RectangleSymbol符號Color色彩Fill curve填滿曲線Opacity (%)Size/WidthEfficiencyFactorEfficiency Factor效率系數The ratio between IsoPower and Average HR for Cycling and xPace (in yd/min) and Average HR for Running騎車時是IsoPower與平均心率的比率,跑步時則為XPace與平均心率的比率EfficiencyIndexEfficiency Index效率指數Efficiency Index : average speed by average power效率指數為平均速度與平均功率比ElapsedTimeElapsed Time歷時secssOnly useful for intervals, time the interval started區段之經過時間ElevationChartWindowProfile Distance (m)Seconds for delta slopeElevation window size (%) relative to current altitudeElevationGainElevation Gain爬升高度metersmElevation Gain Carrying (Est)牽車爬升(估計)feetftElevation gained at low speed with no power nor cadence低速且無功率及迴轉數之爬升量Elevation Gain in meters of feets爬升高度以公尺或英呎計算ElevationLossElevation Loss下降高度metersmfeetftElevation Loss in meters of feets下降高度以公尺或英呎計算ElevationMeterWidgetkmkmmimiErgFilePlotCP臨界功率(km)(mi)W' Balance (j)W'Bal (J)W' Balance (J)Section of %1 starts at %2PowerwattswW' BalanceW'BalkJkJErgOverviewDuration持續時間Intensity強度Stress壓力Relative Intensity相對強度BikeScoreVariability Index變量指數Skiba Variability IndexSkiba變量指數ErgofitConnectionSend request pulse timed out. Time: %1Wrong pulse received. Time: %1Receive of request pulse timed out. Time: %1Send request cadence timed out. Time %1Wrong cadence received. Time: %1Receive of request cadence timed out. Time: %1Send request power timed out. Time: %1Wrong power received. Time: %1Receive of request power timed out. Time: %1Send set load timed out. Time: %1Wrong load acknowledge received. Time: %1Receive of acknowledge set load timed out. Time: %1ErgofitControllerCannot Connect to ErgofitEstimateCPDialog mins 分 secs 秒 watts wCritical Power EstimatorCP預測器Sport運動種類Bike騎車Run跑步Swim 游泳Your best short effort (3-5 min):短程最佳表現 (3-5min):Your best long effort (15-60 min):長程最佳表現 (15-60min):Your critical power:你的臨界功率:Your W':你的W':Estimate預估Done結束 kmkm mi mi m m yd ydYour critical pace:你的臨界段速:Your D':你的D':%1 watts%1 w%1 kJ%1 kJmin/kmmin/kmmin/mimin/mikmkmmimimin/100mmin/100mmin/100ydmin/100ydmmydydEtimatedAverageWPK_DrFestimated Watts Per Kilogram (DrF.)每公斤的瓦特數估算值(DrF.)w/kgw/kgEstimated Average Power relative to Athlete Weight using Dr Ferrari formula based on VAM for gradient higher than or equal to 7%: VAM / (2 + (gradient/10)) / 100使用Dr Ferrari的計算公式,根據坡度大於或等於7%時的VAM,估計相對於運動員體重的平均功率:VAM /(2 +(坡度/ 10))/ 100ExhaustionDialogExhaustion / Failure力竭/失敗Exhausted:耗用:secss + + Time時間ExtendedModelExtended CPCP附加運算RMSE %1 CV %3% [envelope] %2 pointsFatigueIndexFatigue Index疲勞指數%%Fatigue Index is power decay from Max Power to Min Power as a percent of Max Power.疲勞指數是從最大到最小功率的功率衰減,以最大功率的百分比表示。FavouriteMetricsPageAvailable Metrics可用計測量FavouritesUp上Down下FieldsPageDelete刪除Up上Down下++Text文字Textbox文字方塊ShortText簡短字串Integer整數Double雙精度Date日期Time時間Checkbox核取方塊--Add新增<h3>Manage allowed values</h3>If the list is empty, any value is accepted. A list containing <tt>*</tt> as its only entry indicates previous values for the same field will be used to autocomplete input.Screen Tab頁籤Field欄位Type種類Values數值Summary總結Interval區段ExpressionNew新建New (%1)新建 (%1)FilterHrvOutliersFilter R-R Outliers過濾R-R異值Filter R-R outliers (see "R-R flag" in HRV Xdata). Non outliers are marked "1".
- "R-R min and maximum" exclude samples outside (flag -1). Also excluded when filtering range.
- "Filter range" of the average within a window (flag 0)
- "Filter window size" distance on either side of the current interval
- "Set Rest HRV" if checked on interactive use the computed HRV metrics are set as Rest HRV Measures
FilterHrvOutliersConfigR-R maximum (msec)R-R最大值 (msec)R-R minimum (msec)R-R最小值 (msec)msms#R-R maximumR-R minimumFilter range範圍過濾Filter window sizeFilter window size (#)過濾器包容量 (#)Set Rest Hrv設定靜止HrvFindDialogFind values數值查找Between介於Not Between未介於Greater Than大於Less Than小於Equal To相等Not Equal To不相等於and及Clear清除Replace取代Replace All取代所有Replaced %1 values已取代數值%1Power輸出功率Find尋找Time時間Column列Value數値FixAeroPodSet XData.CdA from HR抓取心率值為XData CdAWhen recording with an iBike AeroPod (in HR mode) the CdA data is sent as HR. This tool will update the activity file to move the values from HR into the XData.CdA series.在心率模式下,iBike AeroPod將CdA數值作為心率傳送。本工具將把活動紀錄之心率值移至XData CdA儲存。FixAeroPodConfigWhen recording with an iBike AeroPod (in HR mode) the CdA data is sent as HR. This tool will update the activity file to move the values from HR into the XData.CdA series.在心率模式下,iBike AeroPod將CdA數值作為心率傳送。本工具將把活動紀錄之心率值移至XData CdA儲存。Field Adjustment調整欄位Heartrate to XData.CdAFixDeriveDistanceEstimate Distance Values估計移動距離Derive distance based on ridefile's GPS locations
This process will populate distance information (and override existing distance information if present.)The cubic splines processing estimates distance across polynomial curve, otherwise this feature will compute geometric arc distance between ride points.
從GPS紀錄估算距離
打開此選項,將產生距離資料(且會覆蓋已有的距離資料)。若使用三次樣曲線運算,則利用曲線運算計算點與點之距離,否則將利用幾何弧線法估算。
Derive Distance from GPS on 從GPS紀錄估算距離FixDeriveDistanceConfigUse Cubic Splines三次樣曲線運算Derive distance based on ridefile's GPS locations
This process will populate distance information (and override existing distance information if present.)The cubic splines processing estimates distance across polynomial curve, otherwise this feature will compute geometric arc distance between ride points.
從GPS紀錄估算距離
打開此選項,將產生距離資料(且會覆蓋已有的距離資料)。若使用三次樣曲線運算,則利用曲線運算計算點與點之距離,否則將利用幾何弧線法估算。
FixDeriveHeadwindEstimate Headwind Values估計逆風數值Use weather broadcasted data in FIT file to derive Headwind.利用FIT檔內含之氣象紀錄以推算逆風值Derive Headwind from weather on 從氣象紀錄估算逆風值FixDeriveHeadwindConfigUse weather broadcasted data in FIT file to derive Headwind.利用FIT檔內含之氣象紀錄以推算逆風值FixDerivePowerEstimate Power Values估算功率Derive estimated power data based on speed/elevation/weight etc
Bike Weight parameter is added to athlete's weight to compound total mass, it should include apparel, shoes, etc
CRR parameter is the coefficient of rolling resistance, it depends on tires and surface
CdA parameter is the effective frontal area in m^2, it depends on position and equipment. If 0 estimated from anthropometric data
Draft Mult. parameter is the multiplier to adjust for drafting, 1 is no drafting and 0.7 seems legit for drafting in a group
wind speed shall be indicated in km/h
wind direction (origin) unit is degrees from -179 to +180 (-90=W, 0=N, 90=E, 180=S)
Note: when the file already contains wind data, it will be overridden if wind speed is set
The activity has to be a Ride with Speed and Altitude.
Warning: the accuracy of power estimation can be too low to be of practical use for power analysis of general outdoor rides using typical GPS data. A power meter is recommended.FixDerivePowerConfigBike Weight (kg)自行車重 (kg)kgkgkm/h°°Bike WeightCrrCrrCdACdADraft mult.破風系數Wind Speed風速Wind DirectionWind (kph)風速 (kph), direction 風向FixDeriveTorqueAdd Torque Values補足扭矩值Derive torque when power and cadence data is available.利用功率及迴轉數推算扭矩值。FixDeriveTorqueConfigDerive torque when power and cadence data is available.利用功率及迴轉數推算扭矩值。FixElevationFix Elevation errors爬升錯誤修正Fix or add elevation data. If elevation data is present it will be removed and overwritten.
Elevation data is provided by Open-Elevation.com public API, consider a donation if you find it useful.
INTERNET CONNECTION REQUIRED.Fix Elevation Data not possible無法修正爬升錯誤The following problem occured: %1出現錯誤: %1Connection to remote server timed out連線至遠端伺服器超時Network error: %1Unexpected response from server: %1Parse response error: %1FixFreewheelingFix freewheeling power/cadence.無踩踏時功率/迴轉數修正ANT+ crank based power meters will send 3 duplicate values for power and cadence when the rider starts to freewheel. The duplicates should not be retained. This tool removes the duplicates.ANT+ 大盤功率計在停止踩踏時,仍會傳送同樣的功率及迴轉數3次。本工具可刪除這些重覆數值。FixFreewheelingConfigANT+ crank based power meters will send 3 duplicate values for power and cadence when the rider starts to freewheel. The duplicates should not be retained. This tool removes the duplicates.ANT+ 大盤功率計在停止踩踏時,仍會傳送同樣的功率及迴轉數3次。本工具可刪除這些重覆數值。FixGPSFix GPS errorsGPS錯誤修正Multiple Pass GPS Repair:
0 - Always: Remove GPS errors and interpolate positional
data where the GPS device did not record any data,
or the data that was recorded is invalid.
1 - Optional: Altitude B-Spline smoothing will be applied
if checkbox is set. This is potentially two pass smoothing.
Spline is built with Pass 1 Degree, any original samples
that fail outlier criteria are discarded and then a final
smoothing is run with Pass 2 degree.
2 - Optional: Route B-Spline smoothing will be applied
if checkbox is set. Again this is two pass smoothing where
outliers are determined by euclidean distance's stddev relative
to the smoothing spline. Again a final pass is run without
outliers using Pass 2 degree.
Generally altitude data is noisiest and requires highest degree for
reasonable smoothness. Route gps data gnerally requires a much
lighter touch.
FixGPSConfigMin Slope:Max Slope:Avg Slope:Outliers:Min slope after smoothing applied.Max slope after smoothing applied.Avg slope after smoothing applied.Count of outliers found during altitude smoothing.P1 Route Deviation:P2 Route Deviation:StdDev between original samples and pass 1 spine.StdDev between non-outlier samples and pass 2 spline.Count of outliers discarded prior to pass 2.Pass 1 Altitude Smoothing DegreePass 2 Altitude Smoothing DegreeAltitude Outlier CriteriacmcmPass 1 Route Smoothing DegreePass 2 Route Smoothing DegreeRoute Outlier criteriaAltitude標高Apply BSpline Altitude SmoothingApply B-Spline based altitude smoothing after running the GPS outlier pass.ALTITUDE PASS 1 Smoothing Degree:
The 'degree' of a b-spline is the number of samples that are
used to compute each point. Smoothing becomes more global
as 'degree' increases. Degree is in terms of samples so exact
window size in meters depends on the sample separation in
the ridefile and can vary by sample. This is the initial spline
degree prior to outlier removal.
ALTITUDE PASS 2 Smoothing Degree:
The 'degree' of a b-spline is the number of samples that are
used to compute each point. Smoothing becomes more global
as 'degree' increases. Degree is in terms of samples so exact
window size in meters depends on the sample separation in
the ridefile and can vary by sample. This is the degree to be
used for the second pass spline made after outliers are removed.
ALTITUDE OUTLIER CRITERIA - CENTIMETERS:
An outlier point is one so eggregiously out of range that it should not be used to
build the smoothing spline. A clear example consider a point at the north pole that
is part of a route in Seattle. This outlier criteria is distance in centimeters from
spline.
Route路線Apply BSpline Route SmoothingApply B-Spline based location smoothing after running the altitude smoothing pass.ROUTE PASS 1 Smoothing Degree:
The 'degree' of a b-spline is the number of samples that are
used to compute each point. Smoothing becomes more global
as 'degree' increases. Degree is in terms of samples so exact
window size in meters depends on the sample separation in
the ridefile and can vary by sample. This is the initial spline
degree prior to outlier removal.
ROUTE PASS 2 Smoothing Degree:
The 'degree' of a b-spline is the number of samples that are
used to compute each point. Smoothing becomes more global
as 'degree' increases. Degree is in terms of samples so exact
window size in meters depends on the sample separation in
the ridefile and can vary by sample. This is the degree to be
used for the second pass spline made after outliers are removed.
ROUTE OUTLIER CRITERIA - CENTIMETERSAn outlier point is one so eggregiously out of range that it should not be used to
build the smoothing spline. A clear example consider a point at the north pole that
is part of a route in Seattle. This outlier criteria is the distance from spline in
centimeters past which a value will be considered an outlier and not used to compute the
final smoothing spline.
Step Deviation:Min slope computed from ride file altitude and distance information.Max slope computed from ride file altitude and distance information.Avg slope computed from ride file altitude and distance information.Count of outliers found.StdDev of distance between ride file samples, in meters.Route Outliers:StdDev between original samples and pass 1 spine, in meters.StdDev between non-outlier samples and pass 2 spline, in meters.Count of route outlier points discarded prior to pass 2.Test Current Smoothing SetupClick this button to simulate behavior of current smoothing settings and update the statistics. NOTE: This simulation does not perform the Pass 0 outlier removal.FixGapsFix Gaps in Recording記錄空白段修正Many devices, especially wireless devices, will drop connections to the bike computer. This leads to lost samples in the resulting data, or so-called drops in recording.
In order to calculate peak powers and averages, it is very helpful to remove these gaps, and either smooth the data where it is missing or just replace with zero value samples
This function performs this task, taking two parameters;
tolerance - this defines the minimum size of a recording gap (in seconds) that will be processed. any gap shorter than this will not be affected.
stop - this defines the maximum size of gap (in seconds) that will have a smoothing algorithm applied. Where a gap is shorter than this value it will be filled with values interpolated from the values recorded before and after the gap. If it is longer than this value, it will be filled with zero values.很多裝置,尤其是無線裝置,與碼表的連接可能會斷開,導致最終某些數據點的丟失。
清除這些空白紀錄段且在丟失處對數值進行平滑或用零值替代,能夠幫助計算峰值及平均功率。
本功能需設定兩項參數:
容許量 - 定義要處理空白紀錄段的最小長度(單位為秒),任何短於這一數值的紀錄段不會受影響。
止點 - 定義要使用平滑化計算處理空白紀錄段的最大長度(單位為秒)。短於這一值的空白紀錄段將按前後的數值運算填充。若長於此值紀錄段將被零值填充。FixGapsConfigsTolerance容許量Stop止點Many devices, especially wireless devices, will drop connections to the bike computer. This leads to lost samples in the resulting data, or so-called drops in recording.
In order to calculate peak powers and averages, it is very helpful to remove these gaps, and either smooth the data where it is missing or just replace with zero value samples
This function performs this task, taking two parameters;
tolerance - this defines the minimum size of a recording gap (in seconds) that will be processed. any gap shorter than this will not be affected.
stop - this defines the maximum size of gap (in seconds) that will have a smoothing algorithm applied. Where a gap is shorter than this value it will be filled with values interpolated from the values recorded before and after the gap. If it is longer than this value, it will be filled with zero values.很多裝置,尤其是無線裝置,與碼表的連接可能會斷開,導致最終某些數據點的丟失。
清除這些空白紀錄段且在丟失處對數值進行平滑或用零值替代,能夠幫助計算峰值及平均功率。
本功能需設定兩項參數:
容許量 - 定義要處理空白紀錄段的最小長度(單位為秒),任何短於這一數值的紀錄段不會受影響。
止點 - 定義要使用平滑化計算處理空白紀錄段的最大長度(單位為秒)。短於這一值的空白紀錄段將按前後的數值運算填充。若長於此值紀錄段將被零值填充。FixHRSpikesFix HR Spikes異常心率峰值修正Occasionally heart rate sensors will erroneously report high values for heart rate or drop out (0). This function will look for spikes and dropouts in heart rate data and replace the erroneous data by interpolating the data from either side of the point in question
It takes the following parameter:
Absolute Max - this defines an absolute value for heart rates, and will smooth any values above this absolute value that have been identified as being anomalies (i.e. at odds with the data surrounding it).心率傳感器偶爾會回傳極高心率值或零值。本功能會尋找尖峰和零值並使用前後的數值計算取代異常值。
需要一個參數:
最大值 - 確定心率的最大值,超過該值的數據將以前後之數值進行平滑。FixHRSpikesConfigbpmbpmMax最大值Occasionally heart rate sensors will erroneously report high values for heart rate or drop out (0). This function will look for spikes and dropouts in heart rate data and replace the erroneous data by interpolating the data from either side of the point in question
It takes the following parameter:
Absolute Max - this defines an absolute value for heart rates, and will smooth any values above this absolute value that have been identified as being anomalies (i.e. at odds with the data surrounding it).心率傳感器偶爾會回傳極高心率值或零值。本功能會尋找尖峰和零值並使用前後的數值計算取代異常值。
需要一個參數:
最大值 - 確定心率的最大值,超過該值的數據將以前後之數值進行平滑。FixLapSwimFix Lap Swim from Length Data使用泳池長度修正游泳圈數Sometimes length times or distances from lap swimming files are wrong.
You can fix length-by-length information in Editor SWIM tab: TYPE, DURATION and STROKES.
This tool recompute accumulated time, distance and sample Speed/Cadence from the updated lengths.
Laps are recreated using length distance changes as markers
Pool Length (in meters) allows to re-define the field if value is > 0
Lengths shorter than Min Rest (in seconds) are removed and their duration carried to the next length.
FixLapSwimConfigPool Length (m)泳池長度 (m)Sometimes length times or distances from lap swimming files are wrong.
You can fix length-by-length information in Editor SWIM tab: TYPE, DURATION and STROKES.
This tool recompute accumulated time, distance and sample Speed/Cadence from the updated lengths.
Laps are recreated using pause lengths as markers
Pool Length (in meters) allows to re-define the field if value is > 0有時在游泳紀錄中,每圈時間或距離會有錯誤。
您可以在編輯器的游泳頁籤中修正長度相關信息:泳式,持續時間和動作次數。
此工具利用正確泳池長度重新計算累計時間,距離和速度/迴轉數。
以換池停頓時間作為標記,重新建立各圈數。
泳池長度(以公尺為單位)數值必須> 0mmsPool Length泳池長度Min RestFixMoxySet SmO2/tHb from Speed and Cadence依速度與迴轉數來設定SmO2/tHbWhen recording from the Moxy or BSX Insight in Speed and cadence mode the SmO2 and tHb data is sent as cadence and speed respectively. This tool will update the activity file to move the values from speed and cadence into the Moxy series.當Moxy或BSX Insight在速度/迴轉數記錄模式時,SmO2和tHb數值將會分別被當作迴轉數和速度數值發送。本工具能夠將速度和迴轉數轉移到Moxy系列中。FixMoxyConfigField Adjustment調整欄位Cadence to SMO2依迴轉數來設定SmO2Speed to tHb依速度來設定tHb<b>Field Adjustment</b>When recording from the Moxy or BSX Insight in Speed and cadence mode the SmO2 and tHb data is sent as cadence and speed respectively. This tool will update the activity file to move the values from speed and cadence into the Moxy series.當Moxy或BSX Insight在速度/迴轉數記錄模式時,SmO2和tHb數值將會分別被當作迴轉數和速度數值發送。本工具能夠將速度和迴轉數轉移到Moxy系列中。FixPowerAdjust Power Values功率值修正Adjusting power values allows you to uplift or degrade the power values by a percentage and/or a fix value. It takes two parameters:
Percent Adjustment - this defines percentage to modify values by. Negative values are supported.
Fix Adjustment - this defines an fix amount to modify values by. Negative values are supported.
If both parameters are given, first the relative adjustment takes place, then the fix value adjustment is applied on the result.功率值修正功能可按百分比或定量向上或向下修正功率數值,此功能需要2個參數:
百分比調整 - 設定修正的百分比,支持負值。
定量調整 - 設定修正的固定量,支持負值。
若兩個參數均使用,將先按百分比調整,並在此基礎上作定量調整FixPowerConfigPercent Adjustment百分比調整%%WFix Adjustment定量調整wattwAdjusting power values allows you to uplift or degrade the power values by a percentage and/or a fix value. It takes two parameters:
Percent Adjustment - this defines percentage to modify values by. Negative values are supported.
Fix Adjustment - this defines an fix amount to modify values by. Negative values are supported.
If both parameters are given, first the relative adjustment takes place, then the fix value adjustment is applied on the result.功率值修正功能可按百分比或定量向上或向下修正功率數值,此功能需要2個參數:
百分比調整 - 設定修正的百分比,支持負值。
定量調整 - 設定修正的固定量,支持負值。
若兩個參數均使用,將先按百分比調整,並在此基礎上作定量調整FixPyDataProcessorCustom Python Data ProcessorFixRunningCadenceFix Running Cadence步頻修正Some file report cadence in steps per minutes.
This tools convert to revolutions or cycles per minute有些紀錄檔之步頻計算方式為每分鐘之步數。
本工具將步頻修正為每分鐘循環(左右兩步)數FixRunningCadenceConfigSome file report cadence in steps per minutes.
This tools convert to revolutions or cycles per minute有些紀錄檔之步頻計算方式為每分鐘之步數。
本工具將步頻修正為每分鐘循環(左右兩步)數FixRunningPowerEstimate Running Power估算跑步功率Derive estimated running power data based on speed/elevation/weight etc using di Prampero coefficcients
Equipment Weight parameter is added to athlete's weight to compound total mass, it should include apparel, shoes, etc
Draft Mult. parameter is the multiplier to adjust for drafting, 1 is no drafting and 0.7 seems legit for drafting in a group
wind speed shall be indicated in kph
wind direction (origin) unit is degrees from -179 to +180 (-90=W, 0=N, 90=E, 180=S)
Note: when the file already contains wind data, it will be overridden if wind speed is set
The activity has to be a Run with Speed and Altitude.FixRunningPowerConfigEquipment Weight (kg)裝備重 (kg)Draft mult.破風系數Wind (kph)風速 (kph), direction 風向kgkgkm/h°°Equipment WeightDraft Mult.Wind Speed風速Wind DirectionFixSmO2Fix SmO2 and/or tHb AnomalySmO2及tHb異值修正Occasionally SmO2 (%) and/or tHb (%) will erroneously report missing or high values (SmO2: 0% or >100% / tHb: 0% or > max. tHb parameter).
This function will look for those anomalies in SmO2 and tHb data and depending on the configuration replace the erroneous data by smoothing/interpolating the data from either side of the 3 points in question. It takes the following parameters:
Fix SmO2 - check to fix anomalies in SmO2 data
Fix tHb - check to fix anomalies in tHb data
Max. tHb - any tHb above is considered an outlier
偶爾有極高SmO2/tHb值(SmO2大於100%或tHb大於最大值)或零值。
本功能會尋找尖峰和零值並使用前後的數值計算取代異常值。需要以下參數:
SmO2修正 - 對SmO2值進行檢查及修正
tHb修正 - 對tHb值進行檢查及修正
tHb最大值 - 超過該值的數據將被視為異常FixSmO2ConfigFix SmO2SmO2修正Fix tHbtHb修正%%Max. tHbtHb最大值Occasionally SmO2 (%) and/or tHb (%) will erroneously report missing or high values (SmO2: 0% or >100% / tHb: 0% or > max. tHb parameter).
This function will look for those anomalies in SmO2 and tHb data and depending on the configuration replace the erroneous data by smoothing/interpolating the data from either side of the 3 points in question. It takes the following parameters:
Fix SmO2 - check to fix anomalies in SmO2 data
Fix tHb - check to fix anomalies in tHb data
Max. tHb - any tHb above is considered an outlier
偶爾有極高SmO2/tHb值(SmO2大於100%或tHb大於最大值)或零值。
本功能會尋找尖峰和零值並使用前後的數值計算取代異常值。需要以下參數:
SmO2修正 - 對SmO2值進行檢查及修正
tHb修正 - 對tHb值進行檢查及修正
tHb最大值 - 超過該值的數據將被視為異常FixSpeedFix Speed from Distance以移動距離修正速度Some devices report sample speed not matching the change of distance, for example when using a footpod for speed and GPS for distance.
This tool replaces the existing speed channel, or creates a new one if not present, based on travelled distance
Moving Average Seconds parameter allows to set the seconds of the MA filter to smooth speed spikes某些裝置會紀錄與距離變化不吻合之速度值,例如在GPS及速度傳感器(或footpod)共用的情況。
此工具將直接採用距離,計算並取代速度值。
移動平均秒數參數為對速度值進行平滑化之秒數FixSpeedConfigMoving Average Seconds移動平均秒數Some devices report sample speed not matching the change of distance, for example when using a footpod for speed and GPS for distance.
This tool replaces the existing speed channel, or creates a new one if not present, based on travelled distance
Moving Average Seconds parameter allows to set the seconds of the MA filter to smooth speed spikes某些裝置會紀錄與距離變化不吻合之速度值,例如在GPS及速度傳感器(或footpod)共用的情況。
此工具將直接採用距離,計算並取代速度值。
移動平均秒數參數為對速度值進行平滑化之秒數sMoving Average移動平均FixSpikesFix Power Spikes功率異常值修正Power meters will occasionally report erroneously high values for power. For crank based power meters such as SRM and Quarq this is caused by an erroneous cadence reading as a result of triggering a reed switch whilst pushing off.
This function provides two algorithms that look for spikes/anomalies in power data and replace the erroneous data by:
i) Replacing the point in question with smoothed/interpolated data from either side of the point in question, it takes the following parameters:
Absolute Max (Watts)- this defines an absolute value for watts, and will smooth any values above this absolute value that have been identified as being anomalies (i.e. at odds with the data surrounding it)
Variance (Watts) - This determines the threshold beyond which a data point will be smoothed/interpolated, if the difference between the data point value and the 30 second rolling average wattage prior to the spike exceeds this parameter.
ii) Replacing the point in question with the median value of a window centred upon the erronous data point. This approach is robust to local outliers, and preserves sharp edges, it takes the following parameters:
Window Size - this defines the number of neighbouring points used to determine a median value; the window size is always odd to ensure we have a central median value.
Variance (Watts) - Determines the threshold beyond which a data point will be fixed, if the difference between the data point value and the median value exceeds this parameter.
FixSpikesConfigMedianWPointsMax最大值Variance偏離因數WindowFixTorqueAdjust Torque Values扭矩值修正Adjusting torque values allows you to uplift or degrade the torque values when the calibration of your power meter was incorrect. It takes a single parameter:
Torque Adjust - this defines an absolute value in poinds per square inch or newton meters to modify values by. Negative values are supported. (e.g. enter "1.2 nm" or "-0.5 pi").扭矩修正功能可按定量向上或向下修正從誤校正之功率計獲取之扭矩數值,此功能需要1個參數:
扭矩調整 - 設定修正的固定量,單位為lbin2或nM,亦支持負值。FixTorqueConfigTorque Adjust扭矩調整Adjusting torque values allows you to uplift or degrade the torque values when the calibration of your power meter was incorrect. It takes a single parameter:
Torque Adjust - this defines an absolute value in poinds per square inch or newton meters to modify values by. Negative values are supported. (e.g. enter "1.2 nm" or "-0.5 pi").扭矩修正功能可按定量向上或向下修正從誤校正之功率計獲取之扭矩數值,此功能需要1個參數:
扭矩調整 - 設定修正的固定量,單位為lbin2或nM,亦支持負值。FolderNameDialogFolder Name檔案夾名稱Cancel取消Create建立FormField (kg) (kg) (lbs) (lbs)secondssYou entered '%1' which is not an expected value.你輸入的 '%1' 不正確。FortiusMotor Brake Unit Firmware=%1 Serial=%2
year=%3 type=T19%4
Version2=%5 MotorBrake=%6Motor Brake Unit version cannot be read
Is the motor brake on?FortiusControllerCannot Connect to Fortius無法連接FortiusGCColorPlot Background圖表區:背景ChartTrend Plot Background趨勢圖:背景Train Plot Background訓練圖表:背景Plot Symbols圖表區:符號Plot Thumbnail Background圖表縮圖:背景Plot Title圖表區:標題Plot Selection Pen圖表區:選擇指標Plot TrackerPen圖表區:追縱指標Plot Markers圖表區:標記Plot Grid圖表區:格點Interval Highlighter區段標記Heart Rate心率Data日期Core Temperature核心溫度Speed速度Acceleration加速率Power功率Iso PowerIsoPowerSkiba xPowerSkiba xPowerAltitude Power等高功率Train Target Power訓練:目標功率Critical Power臨界功率Cadence迴轉數Altitude標高Altitude Shading標高上色Wind Speed風速Torque扭矩Slope坡度Gear Ratio齒輪比Run Vertical Oscillation跑步垂直振幅Run Cadence跑動步頻Run Ground Contact跑步觸地時間Muscle Oxygen (SmO2)肌肉含氧 (SmO2)Haemoglobin Mass (tHb)血色素含量(tHb)Oxygenated Haemoglobin (O2Hb)帶氧血紅素 (O2Hb)Deoxygenated Haemoglobin (HHb)不帶氧血紅素 (HHb)Load作功量BikeStressBikeStressShort Term Stress短期壓力 (STS)Long Term Stress長期壓力 (LTS)Stress Balance壓力平衡 (SB)Daily Stress每日訓練壓Calendar Text行事曆:文字GuiPower Zone 1 Shading功率區間1上色Power Zone 2 Shading功率區間2上色Power Zone 3 Shading功率區間3上色Power Zone 4 Shading功率區間4上色Power Zone 5 Shading功率區間5上色Power Zone 6 Shading功率區間6上色Power Zone 7 Shading功率區間7上色Power Zone 8 Shading功率區間8上色Power Zone 9 Shading功率區間9上色Power Zone 10 Shading功率區間10上色HR Zone 1 Shading心率區間1上色HR Zone 2 Shading心率區間2上色HR Zone 3 Shading心率區間3上色HR Zone 4 Shading心率區間4上色HR Zone 5 Shading心率區間5上色HR Zone 6 Shading心率區間6上色HR Zone 7 Shading心率區間7上色HR Zone 8 Shading心率區間8上色HR Zone 9 Shading心率區間9上色HR Zone 10 Shading心率區間10上色Sidebar backgroundOverview Tile BackgroundToolbar HoverChartbar backgroundOverview Tile Background AlternateOverview Tile Background VibrantMap Route LineStress Ramp RateAerolab ElevationAerolab爬升高度Calendar background行事曆:背景Calendar heading行事曆:表頭Calendar Current Selection行事曆:選中Calendar Actual Workout行事曆:實現課表Calendar Planned Workout行事曆:計劃課表Calendar Today行事曆:今天Pop Up Windows Background彈出視窗:背景Pop Up Windows Foreground彈出視窗:前景Chart Bar Unselected圖表欄:未選中Chart Bar Selected圖表欄:選中ToolBar Background工具欄:背景Overview Background概覽:背景VO2VentilationVCO2Tidal VolumeRespiratory FrequencyFeO2W' BalanceW'BalMean-maximal PowerAerobic TISS有氧TISSAnaerobic TISS無氧TISSLeft Torque Effectiveness左扭矩效率Right Torque Effectiveness右扭矩效率Left Pedal Smoothness左踏板平滑度Right Pedal Smoothness右踏板平滑度Toolbar and Sidebar工具欄及側欄SpinScan LeftSpinScan左Performance Plot Background個人表現圖表:背景Performance Plot X Axis個人表現圖表:X軸Performance Plot Y Axis個人表現圖表:Y軸Aerolab Vrtual ElevationActivity History Group活動紀錄歷史分組SpinScan RightSpinScan右Temperature溫度Default Dial Color預設旋鈕顏色Alternate Power額外功率源Left Balance左平衡Right Balance右平衡GColorDialogChoose a ColorStandard標準Search搜尋Cancel取消OKOKColor色彩Select選擇Data日期Custom自定GOVSSGravity Ordered Velocity Stress Score, the BikeStress like metric defined by Dr. Skiba for Running, accounts for variations in speed, slope and relative intensity and durationSkiba教授提出之速度壓力指數,類似BikeStress/TSS之壓力指標分數,考量跑步之速度,坡度,相對強度及持續時間GcCalendarModelDuration持續時間Date日期File檔案GcChartWindowNo data available沒有可用資料Chart Settings...圖表設定...Export Chart ...圖表匯出...Export Chart Image...匯出圖表影像...Upload Chart...上傳圖表...Remove Chart移除圖表Export Chart圖表匯出Export Failed匯出失敗Failed to export chart, please check permissions匯出圖表失敗,請確認權限Upload not possible上傳失敗Standard charts without configuration cannot be uploaded to the GoldenCheetah Cloud.無法上傳無配置項之基本圖表至GoldenCheetah雲Charts containing user defined metrics cannot be uploaded to the GoldenCheetah Cloud.無法上傳帶使用者自定計測量之圖表至GoldenCheetah雲Save Chart Image儲存圖表影像GcCrashDialog%1 Crash Recovery%1 崩潰恢復<b>GoldenCheetah appears to have PREVIOUSLY crashed for this athlete. </b><br><br>The report below gives some diagnostic information that will be useful to the developers. Feel free to post this with a short description of what was occurring when the crash happened to the <href a="https://groups.google.com/forum/?fromgroups=#!forum/golden-cheetah-users">GoldenCheetah forums</href><br><b><br>We respect privacy - this log does NOT contain ids, passwords or personal information.</b><br><b><br>When this dialog is closed the athlete will be opened.</b><b> GoldenCheetah似乎曾經在存取此運動員檔案時當機。 </ b> <br> <br>以下報告提供了一些對開發人員有用的診斷信息。 可於在<href a =“https://groups.google.com/forum/?fromgroups=#!forum/golden-cheetah-users”> GoldenCheetah論壇</ href> 發表以下報告,並簡要說明當機發生情形<br> <b> <br>我們尊重隱私 - 此報告不包含ID,密碼或個人信息。</ b> <br> <b> <br>此對話框關閉時將打開運動員檔案。</ b>Save Crash Report...儲存崩潰報告...Close關閉<p>Build date: %1 %2<br>Build id: %3<br>Version: %4<br>DB Schema: %5<br>Metrics: %7<br>OS: %6<br>OpenGL: %10<br>UI: dpi scale (%8) font size (%9)<br><table><tr><td colspan="2">QT</td><td>%1</td></tr><tr><td colspan="2">QWT</td><td>%2</td></tr><tr><td colspan="2">%3</td><td>%4</td></tr><tr><td colspan="2">SRMIO</td><td>%5</td></tr><tr><td colspan="2">D2XX</td><td>%6</td></tr><tr><td colspan="2">ICAL</td><td>%9</td></tr><tr><td colspan="2">USBXPRESS</td><td>%10</td></tr><tr><td colspan="2">LIBUSB</td><td>%11</td></tr><tr><td colspan="2">VLC</td><td>%12</td></tr><tr><td colspan="2">VIDEO</td><td>%13</td></tr><tr><td colspan="2">SAMPLERATE</td><td>%14</td></tr><tr><td colspan="2">SSL</td><td>%15</td></tr><tr><td colspan="2">R</td><td>%16</td></tr><tr><td colspan="2">Python</td><td>%18</td></tr><tr><td colspan="2">LMFIT</td><td>7.0</td></tr><tr><td colspan="2">GSL</td><td>%19</td></tr></table>Save Diagnostics儲存診斷訊息Text File (*.txt)文字檔 (*.txt)GcMiniCalendarMon一Tue二Wed三Thu四Fri五Sat六Sun日MMMM yyyyyyyy年M月GcUpgradeMetric公制Aerobic TISS有氧TISSAnaerobic TISS無氧TISSStart creating of: Directories... 開始創建:檔案夾... Error: Creation of subdirectories failed發生錯誤:無法創建子檔案夾Creation of subdirectories successful子檔案夾創建成功Start copying of: Configuration files... 開始複製:配置檔案... %1 media and workout files moved to subdirectory: \%2 - %3 failed%1個影片及課表檔案移動至子檔案夾: \%2 - %3 失敗-> Error: Deletion of copied file '%1' failed-> 發生錯誤:無法刪除已複製檔案 '%1'-> Error moving file : -> 移動檔案錯誤: %1 configuration files moved to subdirectory: %2 - %3 failed%1個配置檔案移動至子檔案夾: %2 - %3 失敗TSSTSSUpgrade to v3.6We are about to upgrade your data and layouts to v3.6, please note Ride Summary chart was deprecated, and to use v3.5 again you will need to restore a backupStart copying of: Calendar files...開始複製:行事曆檔案... %1 calendar files moved to subdirectory: %2 - %3 failed%1個行事曆檔案移動至子檔案夾: %2 - %3 失敗Start copying of: Log files...開始複製:日誌檔案... %1 log files moved to subdirectory: %2 - %3 failed%1個日誌檔案移動至子檔案夾: %2 - %3 失敗Start copying of: Activity files (.JSON / .GC)...開始複製:活動紀錄檔案 (.JSON / .GC)...%1 activity (.JSON, .GC) files moved to subdirectory: %2 - %3 failed%1個活動紀錄(.JSON, .GC)檔案移動至子檔案夾: %2 - %3 失敗Start copying of: Activity files (.BAK)...開始複製:活動紀錄檔案 (.BAK)...%1 activity backup (.BAK) files moved to subdirectory: %2 - %3 failed%1個活動紀錄備份(.BAK)檔案移動至子檔案夾: %2 - %3 失敗Start copying of: Media and Workout files... 開始複製:影片及課表檔案... Start conversion of native activity files to GoldenCheetah .JSON format...開始將原檔格式活動紀錄檔轉換為GoldenCheetah .JSON格式... -> Information: Activity %1 - Successfully converted to .JSON-> 資訊:活動紀錄%1成功轉換為 .JSON-> Error: Activity %1 - Conversion errors: -> 錯誤:活動紀錄%1無法轉換: ......... message(s) of .JSON conversion): ......... 轉換為 .JSON訊息: -> Error: Activity %1 - Invalid File Name (expected format 'YYYY_MM_DD_HH_MM_SS.%2')-> 錯誤:活動紀錄%1無效的檔案名(應為:YYYY_MM_DD_HH_MM_SS.%2)-> Error: Activity %1 - Problem reading file-> 錯誤:活動紀錄%1無法讀取%1 activity files converted to .JSON and stored in subdirectory: %2 - %3 failed%1個活動紀錄之.JSON轉換及存檔於子目錄%2 - %3失敗%1 converted activity source files moved to subdirectory: %2 - %3 failed%1個活動紀錄已轉換至.JSON但移動至子目錄%2 - %3失敗Summary: No errors detected - upgrade successful總結:無偵測到錯誤,升版成功Summary: %1 errors detected - please check log details before proceeding總結:偵測到%1個錯誤,請檢視升版日誌<center><br>After choosing 'Proceed to Athlete', the system will open the athlete window using the converted data. Depending on the errors this might lead to follow-up errors and incomplete athlete data. You may either fix the error(s) in your directory directly, or go back to your last backup and correct the error(s) in the source data. <br>The upgrade process will be done again each time you open the athlete, until the conversion was successful - and had no more errors.</center><center><br>選擇[繼續至運動員]後,系統將嘗試打開轉換後之運動員資料。視乎錯誤發生之情況,可能會產生顯示錯誤或不完整資訊。可能需要直接進入運動員檔案夾修正檔案錯誤,或重新打開備份檔之源活動紀錄進行修正。<br>每次打開運動員頁面將重新進行升版程序,直至所有轉換成功無錯誤紀錄為止。</center><center><br>Latest information about possible upgrade problems and concepts to resolve them are available in the<br><a href= "https://github.com/GoldenCheetah/GoldenCheetah/wiki/Upgrade_v3.2_Troubleshooting_Guide" target="_blank">Upgrade v3.2 Troubleshooting Guide<a><center><br>升版可能發生之問題及其解決方式,請見<br><a href= "https://github.com/GoldenCheetah/GoldenCheetah/wiki/Upgrade_v3.2_Troubleshooting_Guide" target="_blank">3.2版本升級疑難排解手冊<a>GcUpgradeExecuteDialogAthlete %1運動員 %1<center><h2>Upgrade of Athlete:<br>%1<br></h2></center><center><h2>運動員資料升版:<br>%1<br></h2></center><center><b>Backup your 'Athlete' data first!<br><b>Please read carefully before proceeding!</b></center> <br> <br>With Version 3.2 the 'Athlete' directory has been refactored by adding a set of subdirectories which hold the different types of GoldenCheetah files.<br><br>The new structure is:<br>-> Activity files: <samp>/activities</samp><br>-> Configuration files: <samp>/config</samp><br>-> Download files: <samp>/downloads</samp><br>-> Import files: <samp>/imports</samp><br>-> Backups of Activity files: <samp>/bak</samp><br>-> Workout related files: <samp>/workouts</samp><br>-> Cache files: <samp>/cache</samp><br>-> Calendar files: <samp>/calendar</samp><br>-> Log files: <samp>/logs</samp><br>-> Temp files: <samp>/temp</samp><br>-> Temp for Activities: <samp>/tempActivities</samp><br>-> Train View recordings: <samp>/recordings</samp><br>-> Quarantined files: <samp>/quarantine</samp><br><br>The upgrade process will create the new directory structure and move the existing files to the new directories as needed. During the upgrade all activity files will be converted to GoldenCheetah's native file format .JSON and moved to the <br><samp>/activities</samp> folder. The source files are moved to the <samp>/imports</samp> folder.<br><br>Starting with version 3.2 all downloads from devices or imported activity files will be converted to GoldenCheetah's file format during import/download. The original files will be stored - depending on the source - in <samp>/downloads</samp> or <br><samp>/imports</samp> folder.<br><br><center><b>Please make sure that you have done a backup of your athlete data before proceeding with the upgrade. We can't take responsibility for any loss of data during the process. </b> </center> <br><center><b>請先備份運動員資料!<br><b>繼續前請認真閱讀</b></center> <br> <br>自3.2版更新,運動員檔案夾新增了一系列子目錄以保存不同的GC文件。<br><br>以下為新檔案夾架構:<br>-> 活動紀錄檔: <samp>/activities</samp><br>-> 配置檔: <samp>/config</samp><br>-> 下載檔: <samp>/downloads</samp><br>-> 匯入檔: <samp>/imports</samp><br>-> 活動紀錄檔備份檔: <samp>/bak</samp><br>-> 訓練課表相關檔: <samp>/workouts</samp><br>-> 快取檔: <samp>/cache</samp><br>-> 行事曆檔: <samp>/calendar</samp><br>-> 日誌檔: <samp>/logs</samp><br>-> 暫存檔: <samp>/temp</samp><br>-> 活動紀錄暫存檔: <samp>/tempActivities</samp><br>-> 訓練模式錄影檔: <samp>/recordings</samp><br>-> 隔離檔: <samp>/quarantine</samp><br><br>升版過程將根據需要,創建新的檔案夾結構並將現有檔案移動至新檔案夾。升版過程中,所有活動紀錄檔將被轉換為GC的檔案格式.JSON並被移至 <br><samp>/activities</samp> 檔案夾。其來源檔則被移動至<samp>/imports</samp> 檔案夾.<br><br>自2.3版起,所有從裝置下載或匯入之活動紀錄將即時被轉換為GC的檔案格式.JSON,而來源檔案會按情況儲存於 <samp>/downloads</samp> 或 <br><samp>/imports</samp> 檔案夾。<br><br><center><b>請於升版前確保您有所有運動員資料之備份。若升版導至資料丟失,我們無法承擔任何責任。</b> </center> <br><center>Please backup the athlete directory:</center><center>請先備份運動員檔案夾:</center>Accept conditions and proceed with Upgrade接受使用規範並進行升版Abort Upgrade中止升版GcUpgradeLogDialogAthlete %1運動員 %1<h1>Upgrade log: GoldenCheetah v3.2</h1><h1>升版日誌: GoldenCheetah v3.2</h1>Proceed to Athlete繼續至運動員Save Upgrade Report...儲存升版報告...Save Log儲存日誌Text File (*.txt)文字檔 (*.txt)GcWindowChart Settings...圖表設定...Remove Chart移除圖表More...更多...GcWindowDialogChart Setup圖表設置Cancel取消OKOKGcWindowRegistryPerformance個人表現Histogram柱狀圖Distribution分佈Pedal Force vs Velocity踏板受力與速度Heartrate vs Power心率與功率對照Python ChartPython圖表Python Chart Python圖表 Calendar行事曆Navigator領航員Season OverviewBlank Overview User ChartTrends趨勢TreeMapPower Duration Activity OverviewBlank OverviewUser Chart Data日期Power DurationScatter分佈圖Aerolab空力實驗室Telemetry感測器資訊Workout訓練課表Realtime即時Pedal Stroke踩踏動作Live MapElevation ChartWeb page網頁Map地圖R ChartR圖表R Chart R圖表 Video Player影片播放器Workout Editor訓練課表編輯器GeneralPageLanguage語言English英文French法文Japanese日文Portugese (Brazil)葡文(巴西)Italian意大利文German德文Russian俄文Czech捷克文Spanish西班牙文Portugese葡文Chinese (Simplified)簡體中文Dutch荷蘭文Swedish瑞典文smmDeviate from default locationLocalizationUnit單位Metric公制Imperial英制Metric Run PaceMetric Swim PaceSmart Recording Threshold (secs)Smart Recording 閥值 (s)Elevation hysteresis (meters)爬升遲滯 (m)W' bal formulaW'Bal 計算式Start with last opened AthleteEnable R啓用REnable Python啓用PythonShare to the OpenData project分享至OpenData專案Athlete Library運動員資料庫R Installation DirectoryR安裝檔案夾Python HomePython根目錄R Installation (R_HOME)R安裝(R_HOME)Use Garmin Smart Recording使用Garmin智慧記錄(Smart Recording)Differential差分Integral積分Warn for unsaved activities on exit活動紀錄未儲存時退出,將提出警示訊息Enable API Web Services啓用API網路服務Application BehaviourRecording and CalculationSmart Recording ThresholdElevation hysteresisIntegrationPython Installation (PYTHONHOME)Pyton安裝(PYTHONHOME)Invalid Folder無效的檔案夾Python does not appear to be installed in that location.
此位置非Python安裝位置。
Select Athlete Library選擇運動員資料庫Browse瀏覽Chinese (Traditional)正體中文GenerateHeatMapDialogHeat Map Generator熱圖產生器Filename檔名Date日期Time時間Action動作dd MMM yyyyyyyy年M月d日Export匯出Browse瀏覽Export to匯出至check/uncheck all選擇/解除選擇所有Cancel取消Generate Heat Map創建熱圖Select Target Directory選擇目標目錄Generating Heat Map...熱圖產生中...Abort停止%1 activities exported, %2 failed or skipped.%1 活動紀錄已匯出,%2 匯出失敗或是已略過Finish完成Reading...讀取中...Writing...寫入中...Read error讀取錯誤GenericPlotdatetime時間GradientGradient坡度Elevation Gain to Total Distance percent ratio高度爬升與總距離百分比GradientPageWorkout Wizard訓練課表精靈Manually create a workout based on gradient (slope) and distance, maximum grade is +-40.根據坡度和距離手動創建課表,最高坡度為+ -40度。KMkmMilesmiGrade坡度Meters Gained爬升公尺Feet Gained爬升英呎Save Workout儲存訓練課表Computrainer Format *.crsComputrainer格式 *.crsGroupByModelZero or not present零值或無資訊Low Stress低訓練壓Medium Stress中壓High Stress高訓練壓Very High Stress極高訓練壓Active Recovery動態恢復Endurance耐力TempoTempoThreshold閾値VO2MaxVO2MaxAnaerobic Capacity無氧能力Maximal最大值IsopowerIsoPowerSteady穩定Variable可變Highly Variable高可變Less than an hour少於一小時Less than 90 minutes少於90分鐘Less than 3 hours少於三小時Less than 5 hours少於五小時More than 5 hours五小時以上Short簡稱Medium中Long全名Very Long極長Undefined未定義Best 1010次最佳Quartile 1: 0% - 25%第一象限: 0% - 25%Quartile 2: 25% - 50%第二象限: 25% - 50%Quartile 3: 50% - 75%第三象限: 50% - 75%Quartile 4: 75% - 100%第四象限: 75% - 100%Date日期This week本週This month本月Last month上月yyyy-MM (MMMM)yyyy年M月File檔案Entire Activity整個活動紀錄%1: %2 (%3 activities)%1: %2 (%3次活動紀錄)%1 activities%1次活動紀錄All Activities所有活動紀錄HeartBeatsHeartbeats心跳beatsbeatsTotal Heartbeats總心跳數HelpWhatsThisMore Help更多協助內容Analysis of a number of activities (e.g. a date range ) like PMC, long term metrics view, ... and data summaries進行選定範圍(如時間範圍)內活動紀錄的分析,如PMC,長期計測量圖等,以及資料總覽Ride indoors, following pre-programmed workouts - with multi device and video playback support按預定課表進行室內騎車訓練,支援各裝置及影片回放Direct download from Powertap, SRM, Joule, Joule GPS, Moxy Monitor or Macro-X device直接從Powertap, SRM, Joule, Joule GPS, Moxy Monitor或Macro-X下載Import any activity file - supported by Golden Cheetah - mass import is supported here匯入任何GoldenCheetah支援之活動紀錄檔案,亦支援大量匯入Activate / De-activate the Sidebar - which provides different sub-sections to select data shown in the main view啓用/禁用側邊欄,以提供主畫面資料顯示的各種子項選擇Athlete Management to open/close an existing or create a new athlete - either in a Tab or in a new Window打開現有或新建運動員,可顯示於頁籤或新視窗Main functions related to activities like Activity Creation, Sharing and Export, and Splitting or Combining Activities活動紀錄相關主要功能,如紀錄創建,分享匯出,切割或合併Manual creation of an activity where the most relevant data can be added in this dialog在此對話框可輸入活動紀錄之最主要數值,以手動創建活動紀錄Wizard to combine data with the currently selected activity in multiple ways通過精靈提示之各種方法,合併選中之活動紀錄A set of functions related different features in GoldenCheetah - please check the details for more information各項GoldenCheetah的特色功能,請參照其個別介紹Estimation of critical power using the Monod/Scherrer power model利用Monod/Scherrer模型預估臨界功率Estimation of Air Density (Rho)空氣密度(Rho)預估Creation of a new Workout for Train - Indoor Riding創建新的訓練課表供室內訓練騎乘使用Search for Workout files and Video files in a configurable set of folders and add to the Train - Indoor Riding - Workout/Video library從硬碟指定檔案夾搜尋訓練課表及影片檔並新增至訓練課表影片資料庫Analysis of a single activity with diagrams like activity plot, W'bal, ... and Chung's Aerolab對單一活動紀錄以圖表等分析,例如騎車紀錄,W'Bal及Chung's Aerolab圖Laps Editor allows to enter a sequence of work-rest intervals series -defined by number of repetitions (reps), distance (dist, units according to preferences in Pace Zones) and duration (min and sec)- to generate the data points for the activity通過計圈編輯器,可根據重複次數,距離或持續時間產生間歇區段,從而生成活動紀錄之資料點Sharing an activity with other trainingsites - only sites for which the authorization has been configured can be seleted for sharing here與其他訓練網站分享活動紀錄,僅能分享至已提供授權之網站Wizard to split an activity into multiple activities based on configurable criteria按可配置之條件,使用精靈界面將活動紀錄分割成多項Table of ContentsQuick access to main Views and common actionsAthletes Status and ConfigurationSync with all Cloud Services with Sync on Start Up option enabledApplication level Options/Preferences for all athletesNavigate backwardNavigate forwardSelect active perspective for the current view, create new perspectives and manage existing onesEntry field for Searching and Filtering of workoutsActivate / De-activate the Compare Pane - which allows to compare activities and intervals in Activities View or date ranges in Trends View - also across athletes. In Train View it shows/hide the Intensity Adjustments and Workout Control Pane.Changes the current view layout between Tabbed and TiledBatch processes a (selectable) set of activtiesAll functions related to sharing of activities with cloud services與活動紀錄分享及雲端服務相關之所有功能Downloading of Body Measures (e.g. weight) from multiple sourcesCalculation of VDOT and Threshold Pace according to Daniels' Running Formula按Daniels'跑步公式計算VDOT及臨界段速Downloading of Workouts from the ERGDB (online workout DB) for Train - Indoor Riding從ERGDB(網上課表資料庫)下載訓練課表供室內訓練騎乘使用Downloading of Workouts from your Today's Plan account for Train - Indoor Riding從Today's Plan帳戶下載訓練課表供室內訓練騎乘使用Downloading of Routes from your Strava account for Train - Indoor RidingCreates an activity heat map using the selected activities and stores it in the choosen folder - "HeatMap.htm". Opened in a Web-Browser the map shows where most activity took place.利用選擇的活動紀錄產生熱區圖並儲存於選定之檔案夾Heatmap.htm。使用瀏覽器將其打開,將顯示最多活動紀錄地點之地圖。Wizards which fix, adjust, add series data of the current activity利用精靈界面,修正,調整或增加資料到活動紀錄Add Torque Values補足扭矩值Adjust Power Values功率值修正Adjust Torque Values扭矩值修正Estimate Power Values估算功率Estimate Distance Values估計移動距離Fix Elevation Errors爬升錯誤修正Fix Gaps in Recording修正記錄空白段Fix GPS ErrorsGPS錯誤修正Fix HR Spikes異常心率峰值修正Fix Power Spikes功率異常值修正Fix Speed速度修正Fix Freewheeling from Power and Speed無踩踏時迴轉數或功率修正Fix Moxy data by moving the moxy values from speed and cadence into the Moxy series從速度及迴轉數欄位移動moxa數值以進行修正Filter R-R outliers過濾R-R異值Fix SmO2/tHb outliersSmO2及tHb異值修正Options to show/hide views (e.g. Sidebar) as well as adding charts and resetting chart layouts to factory settings顯示/隱藏畫面(例如側邊欄)之選項,以及新增圖表,或恢復圖表表示方式至原廠設定Help options of GoldenCheetahGoldenCheetah之幫助說明Full configurable chart type to track performance and trends for metrics, user-definable best durations and model estimates各項可配置圖表類型,用於追縱能力,計測量及個人定義各長度之最佳值或模型預測值之趨勢變化Date range, data grouping settings which apply to a single chart適用於單一圖表之日期範圍或數值分組設定Curves which are plotted for the specific chart - based on presets or individually added and modified here各圖表之曲線 - 可按預定設定描畫或個別新增修改Individual curve configuration各曲線之配置User defined formulas使用者定義公式Tree map visulation of activity data by two selectable dimensions for a configurable metric以可配置之計測量之兩維,樹狀分佈顯示活動紀錄資料Distribution of activity data samples or metrics according time spent in a certain segment按某區段佔用時間,展現活動紀錄數據樣本或計測量之分佈Dashboard for a single activity - the tiles shown here are configurableDetailed information of a single activity - the metrics shown here are configurable單一活動紀錄之詳細資訊 - 本頁顯示之計測量均可配置Configurable tabbed view of activity detail data, plus technical details and change logEditor for activity file data - allowing to change/correct data, find entries and find anomalies活動紀錄編輯器 - 供修改/修正數值,搜尋紀錄或異常值Plot of all activity data series in various ways以各種方式將活動紀錄以圖表方式顯示Selection of all additional curves to be shown in the diagram - plotted only in case data is available in the activity file選擇要在圖表中顯示的所有其他曲線 - 僅在活動紀錄中有相關數值的情況下繪製Analysis of heartrate vs. power along the activity data在活動紀錄中對心率與功率輸出比例進行分析Map of activity活動紀錄地圖Configurable 2D scatter plot of the current activity當前活動紀錄的可配置2D離散圖Configurable 3D plot of the current activity當前活動紀錄的可配置3D離散圖Dashboard for the selected data range - the tiles shown are configurableEmbedded R ChartEmbedded Python ChartNative chart programable using simple formulas with visualization controlConfigurable web page with file download interceptReal time data displayDisplay of the content of the currently selected workoutReal time graph over time of the selected metricsComputrainer SpinScan, displays the torque on each pedal as a function of the angle, over the past few rotationsReproduces the currently selected media fileEdition and diplay of ergometer type workout filesReal time display of the route of simulation workouts in an Open Street MapShow elevation profile of instant positionPredefined and configurable set of data ranges for selection of activities to be analysed針對活動紀錄之預設及可配置日期範圍以供進行分析Powerful filter and search engine to determine the activities which are considered in diagram功能強大之過濾及搜尋器,以選擇圖表顯示數值的活動紀錄Configurable list of activities可配置活動紀錄列表Configurable list of training devicesConfigurable list of workout filesConfigurable list of video filesConfigurable list of video sync filesEntry field for sophisticated Searching and Filtering of activities活動紀錄過濾及搜尋器之輸入欄位Adding intervals to an activity using simple query methods利用簡單的設定,自動從活動紀錄找尋增加間歇區段To compare Activities/Intervals in Activity View and Date Ranges in Trends ViewWorkout Control, Intensity Adjustments and Notifications DisplayAthlete ModelAthlete MeasuresAuto Import自動匯入Backup備份Cloud AccountsAutomatic Interval Detection自動偵測區段Definition of coloring rules for activities活動紀錄上色條件定義Metrics shown in 'Intervals' and 'Summary'User/Custom MetricsCreate or Edit a User MetricMeasuresTrain View devices configuration and preferencesTrain View PreferencesRemote Controls ConfigurationAdd/Remove Train DevicesAdd Train DevicesVirtual Bicycle configuration for simulation ridesCritical Mean Maximal Power Curve臨界平均最大值功率曲線Predefined sets of curves which can be applied as chart definition, or as starting point for individual adjustments預設之曲線類別,可作為圖表顯示或作為個別調整顯示方式的起始點Basic configuration like date range, what series to use and how to plot日期範圍,數值選擇及顯示方式等基本設定Configuration of the CP Model to be used to plot the curve曲線之CP模型設定Definition which date range is used for this particular chart定義本圖表之日期範圍Calendar行事曆Configurable activity log - with build in search capabilities可配置之活動紀錄日誌 - 亦有搜尋功能Selection how the power data series is shown in the plot and general settings on the diagram structure選擇功率輸出數值在曲線圖之顯示方式以及其他圖表顯示架構的基本設定Quadrant analysis of pedal velocity vs. effective pedal force踏板速度對比踏板有效施力之四分位分析Chung's Aerolab analysisAerolab Chung分析Overview/summary of the selected data range - data shown in 'Athlete's Best' are configurable選定日期範圍之概覽顯示 - 可設定運動員最佳欄位顯示項目Chart specific filter/search and date range settings針對圖表之過濾/搜尋及日期範圍選項Definition of points in time 'Events' which are marked explicitely on time related diagrams定義特定賽事日子,於日期相關圖表中標記顯示Simple summary view簡易總結頁面Alternative access to the charts created for the main view主畫面定義之圖表的另一種使用方式Display the available and add new intervals using simple query methods顯示可用或使用簡易查詢方式新增之區段General一般Athlete運動員Training Zone definition for power功率訓練區間之定義Training Zone definition for heartrate心率訓練區間之定義Training Zone definition for Swim and Run游泳及跑步訓練區間之定義Appearance外觀Data Fields資訊欄位Definition of default value(s) for data fields各數值欄位之預設值定義Definition of processing default parameters for the fix, adjust,... tools各修改或修正工具之預設參數定義Metrics計測量HelpWindowHelp Overview線上協助<center><img src=":images/gc.png" height=80><h2>Help Options</h2><b><tt>"Shift"+"F1"</tt></b><br>provides a context specific short description of a feature including the link to the Wiki page explaining more details<hr><br><a href="https://www.goldencheetah.org">Golden Cheetah Website</a><br><a href="https://www.goldencheetah.org/#section-tutorials">Golden Cheetah Website - Video Tutorials</a><br><a href="https://www.goldencheetah.org/#section-science">Golden Cheetah Website - Science in Golden Cheetah</a><br><a href="https://github.com/GoldenCheetah/GoldenCheetah/wiki">Wiki Overview</a><br><a href="https://github.com/GoldenCheetah/GoldenCheetah/wiki/UG_Main-Page_Users-Guide">Wiki - User's Guide</a><br><a href="https://github.com/GoldenCheetah/GoldenCheetah/wiki/FAQ">Wiki - Frequently Asked Questions</a>HistogramWindowBin width柱狀圖寬度Log Y對Y軸取對數Data Samples數值採樣Metrics計測量Show顯示With zeros含零值Shade zones區間上色Bin Width柱狀圖寬度Show in zones以區間顯示Filter過濾器Date Range日期範圍Plot描繪Data Series資料序列Total (x-axis)總量 (x軸)Distribution (y-axis)分佈 (y軸)Color色彩Absolute Time絕對時間Percentage Time百分比時間Use polarised zones使用極性區間Show Zone limitsHrNpHrNp RatioHrNp比Iso Power to Average Heart Rate ratio in watts/bpmIsoPower與平均心率比,單位w/bpmHrPwHrPw RatioHrNp比Power to Heart Rate Ratio in watts/bpm輸出功率與平均心率比,單位w/bpmHrPwPlotHeart Rate(BPM)心率 (bpm)Power (Watts)輸出功率 (w)HrPwWindowHR delayHR延遲Smooth平滑化HR DelayHR延遲Join points連結各點Shade Zones區間上色Show Full Plot全圖顯示HrSchemePageAdd新增Delete刪除++--%%Short簡稱Long全名Percent of LTLT百分比Trimp kTrimp系数Maximum of 10 zones reached.僅允許設定10個區間。New新建New (%1)新建 (%1)HrZoneHr Zone心率區Hr Zone fractional number determined from Average Hr.心率區間,按平均心率得出。HrZonePTime1H1 Percent in ZoneH1百分比Percent of Time in Heart Rate Zone 1.心率區間1所佔時間百分比。HrZonePTime10H10 Percent in ZoneH10百分比Percent of Time in Heart Rate Zone 10.心率區間10所佔時間百分比。HrZonePTime2H2 Percent in ZoneH2百分比Percent of Time in Heart Rate Zone 2.心率區間2所佔時間百分比。HrZonePTime3H3 Percent in ZoneH3百分比Percent of Time in Heart Rate Zone 3.心率區間3所佔時間百分比。HrZonePTime4H4 Percent in ZoneH4百分比Percent of Time in Heart Rate Zone 4.心率區間4所佔時間百分比。HrZonePTime5H5 Percent in ZoneH5百分比Percent of Time in Heart Rate Zone 5.心率區間5所佔時間百分比。HrZonePTime6H6 Percent in ZoneH6百分比Percent of Time in Heart Rate Zone 6.心率區間6所佔時間百分比。HrZonePTime7H7 Percent in ZoneH7百分比Percent of Time in Heart Rate Zone 7.心率區間7所佔時間百分比。HrZonePTime8H8 Percent in ZoneH8百分比Percent of Time in Heart Rate Zone 8.心率區間8所佔時間百分比。HrZonePTime9H9 Percent in ZoneH9百分比Percent of Time in Heart Rate Zone 9.心率區間9所佔時間百分比。HrZonePTimeIHI Percent in ZonePercent of Time in Heart Rate Zone I - Below AeTHrZonePTimeIIHII Percent in ZonePercent of Time in Heart Rate Zone II - Between AeT and LTHrZonePTimeIIIHIII Percent in ZonePercent of Time in Heart Rate Zone III - Above LTHrZonePageSport運動種類Lactate Threshold乳酸閾値Default預設HrZoneTimesecondssHrZoneTime1H1 Time in ZoneH1時間secondssTime in Heart Rate Zone 1.心率區間1內所佔的時間HrZoneTime10H10 Time in ZoneH10時間secondssTime in Heart Rate Zone 10.心率區間10內所佔的時間HrZoneTime2H2 Time in ZoneH2時間secondssTime in Heart Rate Zone 2.心率區間2內所佔的時間HrZoneTime3H3 Time in ZoneH3時間secondssTime in Heart Rate Zone 3.心率區間3內所佔的時間HrZoneTime4H4 Time in ZoneH4時間secondssTime in Heart Rate Zone 4.心率區間4內所佔的時間HrZoneTime5H5 Time in ZoneH5時間secondssTime in Heart Rate Zone 5.心率區間5內所佔的時間HrZoneTime6H6 Time in ZoneH6時間secondssTime in Heart Rate Zone 6.心率區間6內所佔的時間HrZoneTime7H7 Time in ZoneH7時間secondssTime in Heart Rate Zone 7.心率區間7內所佔的時間HrZoneTime8H8 Time in ZoneH8時間secondssTime in Heart Rate Zone 8.心率區間8內所佔的時間HrZoneTime9H9 Time in ZoneH9時間secondssTime in Heart Rate Zone 9.心率區間9內所佔的時間HrZoneTimeIsecondsHI Time in ZoneTime in Heart Rate Zone I - Below AeTHrZoneTimeIIsecondsHII Time in ZoneTime in Heart Rate Zone II - Between AeT and LTHrZoneTimeIIIsecondsHIII Time in ZoneTime in Heart Rate Zone III - Above LTHrZonesActive Recovery動態恢復Endurance耐力區間TempoTempo區間Threshold閾値區間VO2MaxVO2Max區間can't open %1 file檔案: %1 讀取失敗HR Zone defaults must be specified at head of %1 file心率區間之預設定義必須於%1檔案的表頭描述Only one set of zone defaults may be specified in %1 file%1檔案內僅允許一組區間之預設定義line %1: read new range without reading any zones for previous one第%1行:未讀取前一區間前讀取新範圍數值line %1: read zone without preceding date range第%1行:讀取區間但無相對之時間範圍attempt to set zone based on % of LT without setting LT in line number %1.
未設定LT%1無法以LT百分比設定區間file ended without reading any zones for last range未讀取最後範圍之區間定義,檔案已結束Setting end date of range %1 to start date of range %2.
將範圍%1之結束日定義成範圍%2起始日Extending final range %1 to infinite to include present date.
將範圍%1延長之永久,以包含當天日期。LT must be greater than zero in zone range %1 of %2在區段%2定義範圍%1,LT必須大於零Range %1: matching top of zone %2 (%3) to bottom of zone %4 (%5).
範圍%1:將區間上限%2 (%3)匹配至區間下限%4 (%5)。Range %1: setting top of zone %2 from %3 to MAX.
範圍%1:將區間上限%2設定從%3修正至MAX。Threshold (bpm): %1閾値 (bpm): %1<td align="center">Low (bpm)</td><td align="center">最低 (bpm)</td><td align="center">High (bpm)</td><td align="center">最高 (bpm)</td><td align="center">%</td><td align="center">%</td>Problem Saving Heartrate Zones儲存心率區間時遇到問題File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀<td align="center">Zone</td><td align="center">區間</td><td align="center">Description</td><td align="center">説明</td><td align="center">Time</td><td align="center">時間</td>ICalendarAction動作Allow Conflict允許衝突Attachment附件Attendee參加者Calendar Identifier行事曆IDMaster主Scale縮放單位Version版本Level層級Event Identifier賽事IDCategory分組Class分級Command指令Comment筆記Completed完成Contact聯絡方式Date Created建立日期CSID?CSID?No later than不晚於No earlier than不早於Decreed命令Default character set預設字符集Default locale預設區域設置Default timezone預設時區Default VCar預設VCarDeny拒絕Description説明End Date & Time終結日期及時間Timestamp時間戳Start Date & Time起始日期及時間Due Date截止日期Duration持續時間Expiry Date到期日Expand展開Exclusive rule除外條件Freebusy空檔或忙碌Geo地域Grant允許ITIP VersionITIP版本Modified Date修改日期Location地點Max component size最大組成大小Maximum results最大結果Maximum results size最大結果大小Method方法Np earlier thanNp早於Is Multipart為多項組成Name名稱Organised by召集人Owner擁有者Percent Complete完成百分比Permissions權限Priority優先等級Prod Identifier產品IDQuery查詢Query Level查詢層級Query Identifier查詢IDQuery Name查詢名稱Recurring Date重覆日期Recurring Accepted重覆已接受Recurring Expanded重覆展開Recur no later than重覆至Reccurrence Identifier重覆項目IDRelated to相關項目Related to Calendar Identifier相關之行事曆IDRepeat重覆Request Status請求狀態Resources資源Restriction限制Rule條件Scope範圍Sequence Number序列數Status狀態Stores Expanded已展開存儲空間Summary總結Target目標Transport交通方式Trigger觸發Timezone Identifier時區IDTimezone Name時區名稱Timezone Offset from源時區差Timezone Offset to至時區差Timezone URL時區網址Unique Identifier唯一IDURL網址X-PropertyX參數XLI ClassXLI分類XLI Cluster countXLI群組數XLI errorXLI錯誤XLI mime character setXLI MIME字符集XLI mime class IdentifierXLI MIME分組IDXLI mime content typeXLI MIME內容類別XLI mime encodingXLI MIME寫入碼XLI mime filenameXLI MIME檔名XLI mime optional informationXLI MIME額外資訊IWFIWFIWFIntensity Weigthting Factor, part of GOVSS calculation, defined as LNP/RTPGOVSS計算用的強度加權系數即LNP/RTPImagicControllerCannot Connect to Imagic無法連接ImagicImportChartDialogImport Charts匯入圖表Cancel取消Import匯入View檢視Title名稱Diary日記Trends趨勢Activities活動紀錄Train訓練ImportPageWorkout Wizard訓練課表精靈Import current activity as a Gradient ride (slope based)匯入當前活動紀錄為爬坡菜單(基於坡度模擬的訓練課表)KMkmMilesmiDistance (距離 (MetersmFeetftelevation (海拔標高 (Smoothing Parameters平滑化參數Maximum Grade最大坡度Segment Length段長Segment length is based on段長基於Maximum supported grade is +-40支援最大坡度 +-40metersmfeetftElevation Climbed爬升高度Distance距離Save Workout儲存訓練課表Computrainer Format *.crsComputrainer格式 *.crsInfoWidgetNevertodayyesterday%1 days ago%1 weeks ago%1 months ago1 year ago%1 years agoLast Run: %1Distance距離Elevation Gain爬升高度Min ElevationMax ElevationInsertPointCommandInsert Point插入點InsertXDataPointCommandInsert XData Point插入XData點IntensityFactorIntensity Factor is the ratio between IsoPower and the Functional Threshold Power (FTP) configured in Power Zones.強度因數IF是IsoPower及功率區間設定FTP之比。IntervalOverviewItemIntervals區段Activities活動紀錄IntervalSummaryWindowInterval Summary區段總覽select an interval for summary info選擇一區段檢示總覽%1 selected intervals%1區段已選擇Excluding %1 selected排除已選擇%1secondssIntervalsPageEnable interval auto-discovery啟用區段自動偵測IsoPowerIsoPowerIsoPowerwattswIso Power is an estimate of the power that you could have maintained for the same physiological 'cost' if your power output had been perfectly constant.IsoPower 為假設功率輸出在整次活動保持平均,在等同之身心負荷下可能維持之功率估算值。JouleDeviceERROR: open failed: 錯誤:開啟失敗: Joule %1 identified偵測到Joule裝置 %1Read detail for activity %1/%2讀取活動紀錄詳細內容 %1/%2download cancelled下載已取消no data無資料Failed to create temporary file 無法創建暫存檔 Get Unit Software Version...取得裝置軟體版本資料...Version 版本 Get System info...取得系統資料...Get Unit Free Space...取得裝置空間資料...Read summary...讀取概覽...%1 detailed activities%1次詳細活動紀錄Delete detail for activity %1/%2刪除活動紀錄詳細內容 %1/%2Erase all records on computer從電腦刪除所有紀錄JouleDevicesMake sure the Joule (1.0, GPS or GPS+) unit is turned ON請確認Joule (1.0, GPS 或 GPS+) 裝置已打開JoulePacketread checksum error: 校驗碼讀取錯誤:read timeout讀取超時failed to write to device: %1無法寫入至裝置:%1timeout writing to device寫入至裝置超時read header error: 表頭讀取錯誤:read command error: 指令讀取錯誤:wrong response無效的回應read length error: 長度讀取錯誤: read error: 讀取錯誤: , read only %1 bytes instead of: %2,應讀取%2,僅讀取%1位元組。wrong _checksum無效_checksum校驗碼KettlerControllerCannot Connect to Kettler無法連接KettlerKeywordsPageField欄位Use for Background用於背景Add新增Up上Down下<h3>Alternative Keywords</h3>Add additional keyword to have the same colorKeyword關鍵字Color色彩Related Notes Words備註關鍵字New新建New (%1)新建 (%1)++--Delete刪除L10SustainL10 Sustained TimeL10持續時間secondssSustained Time in Power Zone 10, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間10所持續的時間。L1SustainL1 Sustained TimeL1持續時間secondssSustained Time in Power Zone 1, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間1所持續的時間。L2SustainL2 Sustained TimeL2持續時間secondssSustained Time in Power Zone 2, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間2所持續的時間。L3SustainL3 Sustained TimeL3持續時間secondssSustained Time in Power Zone 3, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間3所持續的時間。L4SustainL4 Sustained TimeL4持續時間secondssSustained Time in Power Zone 4, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間4所持續的時間。L5SustainL5 Sustained TimeL5持續時間secondssSustained Time in Power Zone 5, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間5所持續的時間。L6SustainL6 Sustained TimeL6持續時間secondssSustained Time in Power Zone 6, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間6所持續的時間。L7SustainL7 Sustained TimeL7持續時間secondssSustained Time in Power Zone 7, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間7所持續的時間。L8SustainL8 Sustained TimeL8持續時間secondssSustained Time in Power Zone 8, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間8所持續的時間。L9SustainL9 Sustained TimeL9持續時間secondssSustained Time in Power Zone 9, based on (sustained) EFFORT intervals.按偵測之持續間歇區段,功率區間9所持續的時間。LNPLactate Iso Power as defined by Dr. Skiba in GOVSS algorithm乳酸IsoPower由Dr.Skiba通過GOVSS算法定義LTMChartParserProblem Saving Charts Configuration無法儲存圖表配置File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀LTMPlotDate日期Time of Day時間%1 trend%1趨勢%1 average%1平均%1 Top %2 Outliers%1之最高%2個異值%1 Outlier%1異值%1 Best%1最佳Best %1最佳%1wattswBest最佳Day日Week週Month月Year年All全部%1 %2 trend%1 %2趨勢%1 %2 Outliers%1 %2異值%1 %2 Best%1 %2最佳Today今天minutesminsecondssRamp升率hourshrWeek Commencing %1%1 起始一週LTMPopupDate & Time日期及時間ddd, dd MMM yy hh:mmyyyy年M月d日 dddd hh:mmNo activity Selected未選擇活動紀錄No activity selected未選擇活動紀錄dddd, d MMMM yyyyyyyy年M月d日 ddddMMMM yyyyyyyy年M月%1 to %2%1 至 %2dd MMMM yyyyyyyy年M月d日dd MMMM yyyy年M月d日Search/Filter: 搜尋/過濾器: (%1 activities) (%1次活動紀錄) / non activity-related metrics skipped / 已忽略非活動相關之計測量Totals總量Averages平均Maximums最大值Metrics計測量^(Average|Max) ^(平均|最大) secondssLTMSidebarDate Ranges日期範圍Events賽事Add season新增季度Edit season編輯季度Delete season刪除季度Edit details詳細資料編輯Menu選單Charts圖表Filters過濾器Autofilter自動過濾器Edit phase編輯階段Delete phase刪除階段Add Event新增賽事Add Phase新增階段Delete event刪除賽事Add event新增賽事Workout Code|Sport訓練課表代碼|運動種類(blank)(空)Manage Filters過濾器管理Delete Filter%1刪除過濾器%1Edit Season編輯季度You can only edit user defined seasons. Please select a season you have created for editing.只允許編輯用戶定義之季度。請選擇用戶定義之季度進行編輯。Delete Season刪除季度You can only delete user defined seasons. Please select a season you have created for deletion.只允許刪除用戶定義之季度。請選擇用戶定義之季度刪除。You can only add events to user defined seasons. Please select a season you have created before adding an event.只允許新增賽事到用戶定義之季度。請選擇用戶定義之季度以新增賽事。The new event could not be uploaded to your remote calendar.新增之賽事無法上傳至您設定的雲端日曆。You can only add phases to user defined seasons. Please select a season you have created before adding a phase.只允許新增階段到用戶定義之季度。請選擇用戶定義之季度以新增階段。Add Chart新增圖表Edit Chart編輯圖表Delete Chart刪除圖表Delete Selected Charts刪除選中的圖表Export Chart匯出圖表Export Selected Charts匯出選中圖表Import Charts匯入圖表Reset to default恢復預設設定Export Charts圖表匯出Chart File (*.xml)圖表檔案 (*.xml)Entry Error輸入錯誤Selected file (%1) does not exist檔案 %1 不存在You are about to reset the chart sidebar to the default setup即將重置左邊圖表欄至預設顯示方式Do you want to continue?要繼續嗎?LTMToolMetric公制Filter過濾器Date range日期範圍Days日Weeks週Months月Years年Time Of Day時間All全部Group by依群組Shade Zones區間上色Show Legend顯示圖例Show Events顯示賽事Skiba Long Term StressSkiba長期壓力(LTS)Stress壓力Skiba Short Term StressSkiba短期壓力(STS)Skiba Stress BalanceSkiba壓力平衡(SB)Stress Balance壓力平衡 (SB)Skiba STS RampSkiba短期壓力升率Ramp升率Skiba LTS RampSkiba長期壓力升率Aerobic TISS Long Term Stress有氧TISS長期壓力(LTS)Aerobic TISS Short Term Stress有氧TISS短期壓力(STS)Aerobic TISS Stress Balance有氧TISS壓力平衡(SB)Aerobic TISS STS Ramp有氧TISS短期壓力升率Aerobic TISS LTS Ramp有氧TISS長期壓力升率Anaerobic TISS Long Term Stress無氧TISS長期壓力(LTS)Anaerobic TISS Short Term Stress無氧TISS短期壓力(STS)Anaerobic TISS Stress Balance無氧TISS壓力平衡(SB)Anaerobic TISS STS Ramp無氧TISS短期壓力升率Anaerobic TISS LTS Ramp無氧TISS長期壓力升率Daniels Long Term StressDaniels長期壓力(LTS)Daniels Short Term StressDaniels短期壓力(STS)Daniels Stress BalanceDaniels壓力平衡(SB)Daniels STS RampDaniels短期壓力升率Daniels LTS RampDaniels長期壓力升率Work (Kj) Long Term Stress作功(kJ)長期壓力(LTS)Stress (Kj)壓力(kJ)Work (Kj) Short Term Stress作功(kJ)短期壓力(STS)Work (Kj) Stress Balance作功(kJ)壓力平衡(SB)Work (Kj) STS Ramp作功(kJ)短期壓力升率Work (Kj) LTS Ramp作功(kJ)長期壓力升率W' Work (Kj) Long Term StressW'作功(kJ)長期壓力(LTS)W' Work (Kj) Short Term StressW'作功(kJ)短期壓力(STS)W' Work (Kj) Stress BalanceW'作功(kJ)壓力平衡(SB)W' Work (Kj) STS RampW'作功(kJ)短期壓力升率W' Work (Kj) LTS RampW'作功(kJ)長期壓力升率Below CP Work (Kj) Long Term StressCP以下作功(kJ)長期壓力(LTS)Below CP Work (Kj) Short Term StressCP以下作功(kJ)短期壓力(STS)Below CP Work (Kj) Stress BalanceCP以下作功(kJ)壓力平衡(SB)Below CP Work (Kj) STS RampCP以下作功(kJ)短期壓力升率Below CP Work (Kj) LTS RampCP以下作功(kJ)長期壓力升率Distance (km|mi) Long Term Stress距離(km|mi)長期壓力(LTS)Stress (km|mi)壓力(km|mi)Distance (km|mi) Short Term Stress距離(km|mi)短期壓力(STS)Distance (km|mi) Stress Balance距離(km|mi)壓力平衡(SB)Distance (km|mi) STS Ramp距離(km|mi)短期壓力升率Distance (km|mi) LTS Ramp距離(km|mi)長期壓力升率Coggan Chronic Training LoadCoggan週期訓練量(CTL)Coggan Acute Training LoadCoggan短期訓練量(ATL)Coggan Training Stress BalanceCoggan訓練壓力平衡(TSB)Coggan STS RampCoggan短期壓力升率Coggan LTS RampCoggan長期壓力升率Coggan Expected Chronic Training LoadCoggan預計週期訓練量(CTL)Coggan Expected Acute Training LoadCoggan預計短期訓練量(ATL)Coggan Expected Training Stress BalanceCoggan預計訓練壓力平衡(TSB)Coggan Planned Chronic Training LoadCoggan Planned Acute Training LoadCoggan Planned Training Stress BalanceTRIMP Long Term StressTRIMP長期壓力(LTS)TRIMP Short Term StressTRIMP短期壓力(STS)TRIMP Stress BalanceTRIMP壓力平衡(SB)TRIMP STS RampTRIMP短期壓力升率TRIMP LTS RampTRIMP長期壓力升率Edit編輯Use sidebar chart settings使用側邊欄之圖表設定Basic基本Preset預置Estimate預估Formula計算式Measure量測Performance個人表現BanisterBanisterChart %1圖表 %1Data Table資料表Show Stack堆疊顯示Stack Zoom堆疊縮放Add Current新增目前項目Charts圖表Show Banister Helper顯示Banister幫手Apply套用Up上Down下Curves曲線TriScore Long Term StressTriScore長期壓力 (LTS)TriScore Short Term StressTriScore短期壓力 (STS)TriScore Stress BalanceTriScore壓力平衡 (SB)TriScore STS RampTriScore短期壓力升率TriScore LTS RampTriScore長期壓力升率Type種類Details詳細資訊Peak峰值LTMWindowDays日Weeks週Months月Years年All全部Data Table資料表Stacked堆疊化Chart Settings...圖表設定...Export Chart Data...匯出圖表資料...Banister ModelBanister模型Impulse Metric衝量Perf. Metric能力計測量Peak峰值Positive decay正衰減daysdNegative decay負衰減RMSE 2.9 for 22 tests.%1 watts on %2%1 on %2RMSE %1 for %2 tests. grouped by 分組方式:day日week週month月year年time of day時間Time of Day時間secondssDate日期Coggan Acute Training LoadCoggan ATLCoggan Chronic Training LoadCoggan CTLCoggan Training Stress BalanceCoggan TSBhourshrExport Chart Config匯出圖表設定Save Chart Data as CSV匯出圖表資料至CSVGroup by依群組Time Of Day時間LTPageUpdate更新++--Add新增Delete刪除Def定義From Date起始日期Lactate Threshold乳酸閾値Aerobic ThresholdMaximum of 10 zones reached.僅允許設定10個區間。New新建New (%1)新建 (%1)Rest HR静止心率bpmbpmStart Date起始日期Max HR最大心率MMM d, yyyyyyyy年M月 d日Short簡稱Long全名From BPM最低心率Trimp kTrimp系數LapsEditorLaps Editor計圈編輯器reps重覆次數work dist作功距離work min作功分鐘work sec作功秒數rest dist休息距離rest min休息分鐘rest sec休息秒數&OKOK(&O)&Cancel取消(&C)LapsEditorWidgetRepetitionsWork DistanceWork DurationRest DistanceRest DurationmmydydkmkmmimiLeafIndex must be numeric.索引碼必須為數字。invalid data series for best(): %1best()數值序列%1不可用invalid data series for tiz(): %1tiz()數值序列%1不可用invalid literal for config(): %1config()關鍵字%1不可用invalid literal for const(): %1const()關鍵字%1不可用which function has at least 2 parameters.which函數需要至少2個參數。%1 is an unknown symbolactivities("fexpr", expr) - where fexpr is a filter expressiondaterange(start|stop)daterange(start|stop) - unknown symbol '%1'daterange(start|stop) or daterange(datefrom, dateto, expression)%1 needs a single parameterfilename() has no parameterszones(hr|power|pace|fatigue, name|description|low|high|units|time|percent) needs 2 specific parametersexists("symbol") supports only 1 parameter.exists("symbol") parameter must be a constant string.should be rep(value, n)should be seq(start, stop, step)should be length(expr)should be cumsum(vector)should be aggregate(vector, byvector, mean|sum|max|min|count)aggregate(vector, by, func) func must be one of mean|sum|max|min|count.unknown function '%1', must be one of mean|sum|max|min|count.round(v) or round(v, dp)interpolate(algorithm, xvector, yvector, xvalues)interpolate(algorithm, xvector, yvector, xvalues) - must specify and algorithmunknown algorithm '%1', must be one of linear, cubic, akima or steffen.should be append(a,b,[pos])append(a,b,[pos]) but 'a' must be a symbolappend(a,b,[pos]) but 'a' must be a user symbolshould be remove(a,pos,count)remove(a,pos,count) but 'a' must be a symbolremove(a,pos, count) but 'a' must be a user symbolshould be mid(a,pos,count)XDATA expects two parametersXDATA expects a string for the first parametersxdata expects a string, 'km' or 'secs' for second parameters%s expects a string name (the tab name in the raw data view)samples(SERIES), SERIES should be POWER, SECS, HEARTRATE etc.invalid series name '%1'tests(user|bests, duration|power)tests() first parameter must be 'user' or 'bests'.tests() second parameter must be 'duration' or 'power'.no metric specified, %1(symbol) symbol should be a metric nameonly metric names are supportedunknown metric %1kmeans(centers|assignments, k, dim1, dim2, dimn)kmeans(centers|assignments, k, dim1, dim2, dimn) - %s unknown%1(symbol|date), symbol should be a metric nameinvalid symbol '%1', should be either a metric name or 'time' or 'date'too many parameters: %1(symbol|date, start, stop)%1(symbol|name|start|stop|type|test|color|route|selected|date|filename), symbol should be a metric nameinvalid symbol '%1', should be either a metric name or 'name|start|stop|type|test|color|route|selected|date|time|filename''too many parameters: %1(symbol, start, stop)%1(name|date|priority|description)invalid symbol '%1', should be 'name|date|priority|description''annotate(label|hline|vline|voronoi, ...) need at least 2 parameters.Date日期Time時間Name名稱Start開始StopType種類Test測試Color色彩Route路線SelectedFile Namebests() - first parameters is a symbol should be a series name or 'date'too many parametersmeasures(group, field) - must have group and field parameters.measures group must be a string.invalid measures group '%1'.measures field must be a string.invalid measures field '%1' for group '%2', should be one of: %3.quantil(vector, quantiles)multisort(ascend|descend, list [, .. list n])multisort(ascend|descend, list [, .. list n]), need to specify ascend or descendmultisort: list arguments must be a symbol'%1' is not a user symbolsort(ascend|descend, list), need to specify ascend or descendrank(ascend|descend, list), need to specify ascend or descendargsort(ascend|descend, list), need to specify ascend or descendmultiuniq(list [, .. list n])multiuniq: list arguments must be a symbolcurve(seriesname, x|y|z|d|t), need to specify series name and data.'%1' is not a valid, x, y, z, d or t expectedmeanmax(SERIES|data [,start, stop]) or meanmax(xvector,yvector)meanmax(SERIES), SERIES should be POWER, HEARTRATE etc.dist(series, data|bins), both parameters are required.dist(series, data|bins), series should be one ofPOWER, HEARTRATE etc.dist(series, data|bins), second parameter must be ether 'data' or 'bins'annotation type '%1' not availableannotate(voronoi, centers)annotate(lr, solid|dash|dot|dashdot|dashdotdot, "colorname")annotate(hline|vline, 'label', solid|dash|dot|dashdot|dashdotdot, value)smooth(list, algorithm [,parameters]) need at least 2 parameters.smoothing algorithm '%1' not availablesmooth(list, sma, forward|centered|backward, windowsizesmooth(list, ewma, alpha (between 0 and 1)lowerbound(list, value), need list and value to findlr(x, y), need x and y vectors.mlr(yvector, xvector1 .. xvectorn), need at least 1 xvector and y vectors.lm(expr, xlist, ylist), need formula, x and y data to fit to.lm(expr, xlist, ylist), formula must have at least one parameter to estimate.
sapply(list, expr), need 2 parameters.pmc(metric, stress|lts|sts|sb|rr|date), need to specify a metric and series.invalid PMC series '%1'should be banister(load_metric, perf_metric, nte|pte|perf|cp|date)XDATA needs 3 parameters.XDATA需要3個參數。XDATA expects a string for first two parametersXDATA前2個參數必須為字串。XDATA expects a symbol, one of sparse, repeat, interpolate or resample for third parameter.XDATA第3個參數必須為關鍵字:sparse,repeat,interpolate或resample。XDATA expects one of sparse, repeat, interpolate or resample for third parameter. (%1)XDATA第3個參數必須為關鍵字:sparse,repeat,interpolate或resample。(%1)XDATA_UNITS needs 2 parameters.XDATA_UNITS需要2個參數。XDATA_UNITS expects a string for first two parametersXDATA_UNITS前2個參數必須為字串。isset/set/unset function first parameter is field/metric to set.isset/set/unset之首參數應為指涉對象欄位或計測量。%1 is not supported in isset/set/unset operations%1不支援 isset/set/unset 之動作isset has one parameter, a symbol to check.isset應附指涉對象參數。set function needs 3 paramaters; symbol, value and expression.set函數需要3個參數:對象,數值及表示式。unset function needs 2 paramaters; symbol and expression.unset函數需要2個參數:對象及表示式。%1 function expects model name as first parameter.%1 function expects model name as first parameter%1 function expects parameter or duration as second parameterarray assignment must be to symbol.'%1' unknown variableassign to selection not supported at present. sorry.function '%1' expects %2 parameter(s) not %3功能函數%1預期%2個參數,收到%3個unknown function %1未知的函數%1unary negation on a string!不能設定字串為負!LeftRightBalanceLeft/Right Balance左/右平衡%%Left/Right Balance shows the proportion of power coming from each pedal for rides and the proportion of Ground Contact Time from each leg for runs.對於騎車,左/右平衡為每邊踏板提供之功率比例。對於跑步則為每一腿之觸地時間比。LibraryImport Videos, VideoSyncs and Workouts匯入訓練課表,影片及影片同步檔No supported videos, videoSyncs or workouts were found to import未找到支援之影片,影片同步檔或訓練課表Copy VideoSync Failed複制影片同步檔失敗%1 already exists in videoSync library: %2%1已存在於影片同步檔檔案夾:%2%1 cannot be written to videoSync library %2. Check library path, permissions and free space%1 cannot be written to videoSync library %2, check permissions and free space%1 cannot be written to workout library %2. Check library path, permissions and free space%1 cannot be written to workout library %2, check permissions and free spaceCopy Workout Failed複制訓練課表失敗%1 already exists in workout library: %2LibrarySearchDialogSearch for Workouts, Syncs and Media搜尋訓練課表,影片及影片同步檔Workout files (.erg, .mrc, .zwo etc)訓練課表檔案 (.erg, .mrc, .zwo 等)Video files (.mp4, .avi etc)影片檔案 (.mp4, .avi 等)VideoSync files (.rlv, .tts etc)Search Path搜尋路徑Video references影片喜好設定Searching...搜尋中...Videos影片Workouts訓練課表VideoSyncs影片同步檔Cancel取消Search搜尋Files to search for:欲搜尋之檔案:Abort Search中止搜尋Save儲存Search completed.搜尋完成。Select Directory選擇檔案夾ListEditWidgetNew新建New (%1)新建 (%1)LiveMapWebPageWindowOSM Base URLInitial ZoomApply changesLocalFileStoreYou must define a network folder first必須先定義網路檔案夾Folder %1 does not exist/is not accessible檔案夾 %1 不存在或無法存取Folder %1 does not exist檔案夾 %1 不存在Completed.完成。Write to folder %1 failed寫入檔案夾%1失敗Local Store本地儲存區Sync with a local folder or thumbdrive.與本地檔案夾或隨身碟同步。MUPlotw(x)w(x)Motor Unit, x機動元,xMUWidgetMass重量P-maxPmaxP-minPminTauΤPmaxPmaxPminPminAlphaΑMacroDeviceERROR: open failed: 錯誤:開啟失敗: Request number of training...提取訓練紀錄資料...download cancelled下載已取消no data無資料data error資料錯誤Failed to create temporary file 無法創建暫存檔 Request datas of training %1 / %2...提取訓練紀錄資料 %1 / %2...training %1/%2... (%3 Bytes)訓練 %1/%2... (%3位元組)MacroDevicesMake sure the Macro unit is turned
on and that its display says, "PC Link"請確認Macro裝置已啓動
且其晝面顯示"PC Link"MacroPacketread checksum error: 校驗碼讀取錯誤:read timeout讀取超時failed to write to device: %1無法寫入至裝置:%1timeout writing to device寫入至裝置超時read command error: 指令讀取錯誤:read error: 讀取錯誤: , read only %1 bytes instead of: %2,應讀取%2,僅讀取%1位元組。MainWindow&Download from device...從裝置下載(&D)...Train訓練Add Chart新增圖表Toggle Sidebar切換左方資訊列Delete Activity刪除活動紀錄&Athlete運動員(&A)A&ctivity活動紀錄(&C)&Manual entry...手動建立...&Export...匯出(&E)...Sha&re分享(&S)CP and W' Solver...CP 及 W' 計算...VDOT and T-Pace Calculator...VDOT及T-段速計算機...Download workouts from Strava Routes...Import workouts, videos, videoSyncs...匯入訓練課表,影片或影片同步檔...Scan disk for workouts, videos, videoSyncs...掃描磁碟裡的訓練課表,影片或影片同步檔...Maintain charts圖表維護Curate charts編集圖表Selecting ride...Checking for udates...Asking for telemetry...Select Chart file to import選擇要匯入圖表檔案GoldenCheetah Chart Files (*.gchart)GoldenCheetah圖表檔(*.gchart)Import Chart匯入圖表No chart file selected!未選擇圖表檔案。Export PersepctiveExport PerspectiveNo perspective file selected!Select Perspective file to exportGoldenCheetah Perspective Files (*.gchartset)Import PerspectiveActivity Import匯入活動紀錄Closing of athlete window not possible while background activity import is in progress...活動紀錄背景匯入進行中,無法關閉運動員視窗...Chart Import圖表匯入Import Images FailedYou can only import images on the activities view with an activity selected.Import Images to Activity%1 images imported.Failed to export activity, please check permissions匯出活動紀錄失敗,請確認權限No Activity To Save沒有活動紀錄可儲存There is no currently selected activity to save.並無選中的活動紀錄可儲存。Split Activity分割活動紀錄No activity selected未選擇活動紀錄Current activity contains no data to split目前的活動紀錄不包合可分割的資料Current activity contains no data to merge目前的活動紀錄不包合可整併的資料Are you sure you want to delete the activity:你想要刪除活動紀錄:The workout directory is not configured, or the directory selected no longer exists.
Please check your preference settings.訓練課程檔表夾未設定或無效。
請檢查您的設定。Loading activities: %1%CloudDBCloudDBCurrent athlete is not registered as curator - please contact the GoldenCheetah team目前運動員非注冊編集者,請聯繫Golden Cheetah團隊Create Heat Map...創建熱區圖...Export Metrics as CSV...將計測量匯出成CSV...Create a new workout...建立新的訓練...Download workouts from TrainerDay...從TrainerDay下載訓練課表...Air Density (Rho) Estimator...空氣密度(Rho)預估...Toggle Compare Pane切換比較欄位&Save activity儲存活動紀錄(&S)D&elete activity...刪除活動紀錄(&E)...Split &activity...分割活動紀錄(&A)...Combine activities...合併活動紀錄...Upload Activity...上傳活動紀錄...Synchronise Activities...同步活動紀錄...Check For New Activities檢查新增活動紀錄CP and W' Estimator...CP 及 W' 預估...Activities活動紀錄Tabbed not Tiled以頁籤表示You are about to reset all charts to the default setup你即將重置所有的圖表至預設狀態Do you want to continue?要繼續嗎?Imported %1 metric charts匯入%1計測方式圖表&New Athlete...新建運動員資料(&N)Find intervals...尋找區段...&QuitSelect Activity選擇活動紀錄No activity selected!未選擇活動紀錄!Export Activity匯出活動紀錄Export Failed匯出失敗&Import from file...從檔案匯入(&I)...&Tools工具(&T)&Options...選項(&O)...&View檢視(&V)Toggle Full Screen切換至全螢幕Show Left Sidebar顯示左方資訊列Show Compare Pane顯示比較欄位Show Toolbar顯示工具列athletesSetting up GUI...Setting up GUI: Scopebar...planFeature not implemented yettrendsactivitiesreflecttrainappssyncoptionsSetting up GUI: Context Help...Setting up GUI: Toolbar...Toggle Tab/TileWhat's This?Setting up GUI: Central Widget...Setting up GUI: Application Menus...Open...Backup...Delete...Save all modified activities儲存所有修改的活動紀錄Settings...&Batch Processing...Add Cloud Account...新增雲端帳號...Get Measures...Cloud Status...雲端狀態...Cloud Contributions雲端貢獻Maintain user metricsCloud Curator雲端編集者Curate user metrics&Edit編輯(&E)Show View SidebarShow Athlete Tabs顯示運動員頁籤Trends趨勢Import Perspective...Export Perspective...Import Chart...匯入圖表...Upload Chart...上傳圖表...Download Chart...下載圖表...Reset Layout重置編排&Help說明(&H)&Help Overview線上協助(&H)&User Guide使用指引(&U)&Log a bug or feature request提報問題或新功能提案(&L)&Discussion and Support Forum討論區(&D)&About GoldenCheetah關於Golden Cheetah(&A)Import from File從檔案匯入Refresh in Progress刷新中Export Metrics匯出計測量Comma Separated Variables (*.csv)(*.csv)Workout Directory Invalid無效的訓練課表檔案夾Delete刪除Changes on 修改於 ManageFixPyScriptsDialogManage Python FixesEdit編輯Delete刪除Close關閉ManageFixPyScriptsWidgetSelect a Python Fix to manageNew新建Edit編輯Delete刪除Are you sure you want to delete %1?ManualActivityPageBasicsGeneral InformationSome fields will appear only when relevant to the selected sport. Whenever possible, uploading a recording of your activity is preferred over creating it manually.bpmbpmAverage Power平均輸出功率WPace intervalsAverage Cadence平均迴轉數rpmrpmDistance距離kmkmmimiSwim DistancemmydydDuration持續時間Date日期Time時間Sport運動種類Sub SportWorkout Code訓練課表代碼Average Heartrate平均心率ManualActivityPageSpecificsStress InformationStress values can be estimated or entered manually. Estimates are based on recent activities of the same sport, or your full history if none are found.Duration持續時間Distance距離Manually手動設定kJkJBikeStressBikeStressBikeScoreSwimScoreTriScoreEstimate byEstimate Stress DaysWork作功ManualActivityWizardManual Entry手動建立Unable to save無法儲存There is already an activity with the same start time or you do not have permissions to save a file.於同一起始時間已有活動紀錄,或缺少檔案儲存權限。ManualDataProcessorDialogSettings設定Description説明Save parameters as defaultOKOKCancel取消ManualRideDialogManual Entry手動建立Date:日期:Start time:起始時間:Pace intervals:段速區段:&Laps Editor計圈編輯器(&L)Duration:持續時間:Distance (%1):距離(%1):Sport:運動種類:Workout Code:訓練課表代碼:Notes:筆記:Average HR:平均心率:Average Watts:平均瓦數:Average Cadence:平均迴轉數:Average Speed:平均速度:Estimate Stress by:預估壓力方式:Duration持續時間Distance距離Manually手動設定Estimate Stress days:預估壓力天數:There is already an activity with the same start time or you do not have permissions to save a file.於同一起始時間已有活動紀錄,或缺少檔案儲存權限。Swim游泳Run跑步Daniel Points: Daniels指數: BikeStress: BikeStress: Work (KJ):作功 (KJ)Metrics計測量Unable to save無法儲存&OKOK(&O)&Cancel取消(&C)MapWebBridgeSelection #選項 #Selection #%1 選項 #%1 MatchesW'bal MatchesW'Bal 點火Number of W' balance Matches higher than 2kJ, W' bal tracks the level of W' according to CP model during intermitent exercise.大於2kJ之W'Bal 點火次數,W'Bal按CP模型追縱在間歇訓練時W'之剩餘狀況。MaxCTMax Core Temperature最大核心溫度C°CMaximum Core Temperature. The core body temperature estimate is based on HR data按心率估計之最大核心溫度MaxCadenceMax Cadence最大迴轉數rpmrpmMaximum Cadence最大每分鐘迴轉數MaxHrMax Heartrate最大心率bpmbpmMaximum Heart Rate.最大每分鐘心率MaxMatchMaximum W'bal Match最大W'Bal點火kJkJMaximum W' bal Match, W' bal tracks the level of W' according to CP model during intermitent exercise.最大W'Bal點火:W'Bal按CP模型追縱在間歇訓練時W'之剩餘狀況。MaxPowerMax Power最大輸出功率wattswMaximum Power最大輸出功率MaxPowerVarianceMax Power Variance最大功率變化量Maximum Power Deviation with respect to 30sec Moving Average按30秒移動平均計算之最大功率變化量MaxRunCadenceMax Running Cadence最大步頻spmspmMaximum Running Cadence最大每分鐘步頻MaxSmO2Max SmO2最大SmO2%%Maximum Muscle Oxygen Saturation, the percentage of hemoglobin that is carrying oxygen.最大肌肉帶氧量即帶氧血紅素的百分比。MaxSpeedMax Speed最高速度kphkphmphmphMaximum Speed最大速度MaxTempMax Temp最高溫度C°CF°FMaximum Temperature紀錄之最高溫度MaxWPrimeMax W' ExpendedW'最大消耗%%Maximum W' bal Expended expressed as percentage of W', W' bal tracks the level of W' according to CP model during intermitent exercise.以W'百分比表示之最大消耗W'Bal,W'Bal按CP模型追縱在間歇訓練時W'之剩餘狀況。MaxtHbMax tHbtHb最大值g/dLg/dLMaximum total hemoglobin concentration. The total grams of hemoglobin per deciliter.最大總血紅素濃度,即每百亳升之血紅素總重量公克。MeanPowerVarianceAverage Power Variance平均功率變化量Mean Power Deviation with respect to 30sec Moving Average按30秒移動平均計算之平均功率變化量MeasureManual entry手動建立WithingsWithingsCSV Upload上傳CSVUnknown未知MeasuresBody身體組成Weight體重Fat Mass脂肪重量Muscle Mass肌肉重量Bone MassLean MassFat Percent脂肪百分比kgkg%%lbslbsHrv心率變量RMSSDrMSSDHR心率AVNNAVNNSDNNSDNNPNN50PNN50LFLFHFHFRecovery Points恢復點msecmsecbpmbpmmsec^2msec^2Rec.Points恢復點MeasuresConfigPageSymbol符號Name名稱GroupsMetric Units公制單位Imperial Units英制單位Units FactorCSV HeadersNew新建New (%1)新建 (%1)Fields in Group <i>%1</i>Edit編輯Delete刪除Saved changes take effect after restartAre you sure you want to remove Measures customizations and reset to default configuration?This action takes effect immediately and cannot be revertedReset重置MeasuresCsvImportSelect %1 measurements file to importCSV Files (*.csv)CSV檔案 (*.csv)No file selected.未選擇檔案。Selected file %1 cannot be opened for reading.檔案: %1 讀取失敗。Column header contains duplicate identifier檔案有重覆列Column 'timestamp_measurement'/'Datetime'/'date' is missing.缺少日期及時間戳:標題需命名為'timestamp_measurement'/'Datetime'/'date'Column '%1' is missing.Number of data columns: %1 in line %2 lower than header columns: %3第%2行:數值欄位數量%1與列頭數量%3不一致Invalid 'ts' - Timestamp - in line %1第%1行時間戳'ts'無效Invalid 'timestamp' - Date/Time not ISO 8601 format - in line %1第%1行日期/時間'date'與ISO8601格式不符Invalid 'date' - Date not yyyy-dd-MM format - in line %1第%1行日期/時間'date'與yyyy-dd-MM格式不符Invalid '%1' - in line %2MeasuresDownload%1 Measures downloadChoose the download or import source選擇下載或匯入來源WithingsWithingsImport CSV file匯入CSV檔案Choose date range for download選擇下載日期範圍From date of first recorded activity to today從第一次活動紀錄至今天From date of last downloaded measurement to today從上次下載量測資料至今天Enter manually:手動輸入:Discard all existing measuresDownload下載Close關閉%1 MeasuresInvalid date range - please check your input日期範圍無效,請檢查設定Download completed.下載完成。Downloading of measures failed with error: %1MeasuresFieldSettingsDialogSymbol符號Name名稱Metric Units公制單位Imperial Units英制單位Cancel取消OKOKError錯誤MeasuresPageFrom Date - Time起始日期 - 時間Start Date起始日期MMM d, yyyy - hh:mm:ssComment筆記Update更新++--Delete刪除Source來源Original Source來源Manual entry手動建立Add增加MeasuresSettingsDialogSymbol符號Name名稱Cancel取消OKOKError錯誤MergeActivityWizardCombine Activities合併活動紀錄MergeAdjustAdjust Alignment對時調整Adjust merge alignment in time (use cursor and pgDown/pgUp keys for precise alignment)調整欲合併之資料的時間(用箭頭及翻頁鍵進行精準調整)Adjust:調整:Reset重置MergeChooseChoose an Activity選擇活動紀錄Choose an Existing activity to Combine選擇需合併的現有活動紀錄Filename檔名Date日期Time時間dd MMM yyyyyyyy年M月d日MergeConfirmConfirm確認Complete and Save完成並儲存Press Finish to update the current activity with the combined data.
The changes will be saved and cannot be undone.
If you press continue the activity will be saved, if you do not want to continue either go back and change the settings or press cancel to abort.點擊完成以合併資訊並更新目前活動。
修改內容將保存且無法撤銷。
若點擊繼續,活動將被保存;如不想繼續,後退繼續修改或點擊取消放棄。MergeDownloadDownload Activity下載活動紀錄Download Activity to Combine下載活動紀錄進行合併Error - Unknown file type錯誤 - 未知的檔案格式MergeModeSelect Mode選擇模式How would you like to combine the data ?您想怎樣進行資料合併?Merge Data to add another data series將數值存入至另一數據序列欄位Merge data series from one recording into the current activity where different types of data (e.g. O2 data from a Moxy) have been recorded by different devices. Taking care to align the data in time.將一筆紀錄之數據序列存入至另一數據序列欄位(如Moxy的帶氧數值)同時確保數值之紀錄時間吻合Join Data to form a longer activity將數值合併為更長的活動紀錄Append the data to the end of the current activity to create a longer activity that was recorded in multiple parts.將數值併合到現有活動紀錄的末端,產生更長的多段紀錄活動。MergeSelectMerge Data Series合併的數值序列Select the series to merge together選擇要合併的序利Target activity目標活動紀錄Source of additional data series額外數值序列來源d MMM yy hh:mm:ssyy年M月d日 hh:mm:ssMergeSourceSelect Source選擇來源Where is the data you want to combine ?要合併的數值在哪裡?Import from a File從檔案匯入Import and combine from a file on your hard disk or device mounted as a USB disk to combine with the current activity.從硬碟或USB隨身碟之檔案匯入並與當前活動紀錄合併。Download from Device從裝置下載Download data from a serial port device such as a Moxy Muscle Oxygen Monitor or bike computer to combine with the current activity.從類似Moxy Muscle Oxygen Monitor或碼錶等裝置下載並與當前活動紀錄合併。Existing Activity現有活動紀錄Combine data from an activity that has already been imported or downloaded into GoldenCheetah. Selecting from a list of all available activities. 從已匯入或下載至GoldenCheetah之活動紀錄中選擇,並與當前活動紀錄合併。All Supported Formats (%1)所有支援格式 (%1)All files (*.*)所有檔案 (*.*)Import from File從檔案匯入Error - Unknown file type錯誤 - 未知的檔案格式MergeStrategySelect Strategy選擇合併方式How should we align the data ?您想怎樣進行資料校正?Align using start time使用起始時間校正Align the data from the two activities based upon the start time for the activities. This will work well if the devices used to record the data have their clocks synchronised / close to each other.按兩項活動紀錄之起始時間進行校正。若紀錄檔之時間經同步或非常接近,效果很好。Align using shared data series使用共通數據序列校正If the two activities both contain the same data series, for example where both devices recorded cadence or perhaps HR, then we can align the other data series in time by matching the peaks and troughs in the shared data.若兩項活動紀錄有共通之數據序列,例如兩個裝置同時紀錄迴轉數或心率,則可以用共通數據之峰谷值進行時間校正。Align starting together共通起始校正Regardless of the timestamp on the activity, align with both activities starting at the same time.忽略活動紀錄之時間戳,直接以檔案起始校正。Align ending together共通結束校正Regardless of the timestamp on the activity, align with both activities ending at the same time.忽略活動紀錄之時間戳,直接以檔案結束點校正。Interpolate location data based upon distance按距離值推斷位置資訊Merge the two activity streams, interpolating location and slope values based upon mutual distance.將兩項活動紀錄檔按共通行走距離推算位置及坡度數值。MergeWelcomeCombine Activities合併活動紀錄Lets get started開始!This wizard will help you combine data with the currently selected activity.
You will be able to import or download data before merging or joining the data and manually adjusting the alignment of data series before it is saved.本精靈可幫助您合併選擇的活動紀錄。
您可以在進行合併前匯入或下載相關資料,以及在合併檔儲前進行數值的手動修改。MetaOverviewItemWorkout Code訓練課表代碼MetadataDialogMetadata EditorCancel取消OkMetadataPageFields欄位Colour KeywordsDefaults預設Processors && AutomationProcessing處理中MetricConfigCustom自定FavouritesMetricOverviewItemCareerSo farYear年90d90d30d30dsecondsMinHrMin Heartrate最小心率bpmbpmMinimum Heart Rate.最小每分鐘心率MinSmO2Min SmO2最小SmO2%%Minimum Muscle Oxygen Saturation, the percentage of hemoglobin that is carrying oxygen.最小肌肉帶氧量即帶氧血紅素的百分比。MinTempMin Temp最低溫度C°CF°FMinimum Temperature紀錄之最低溫度MinWPrimeMinimum W' bal最低W'BalkJkJMinimum W' bal, W' bal tracks the level of W' according to CP model during intermitent exercise.最低W'Bal值,W'Bal按CP模型追縱在間歇訓練時W'之剩餘狀況。MintHbMin tHbtHb最小值g/dLg/dLMinimum total hemoglobin concentration. The total grams of hemoglobin per deciliter.最小總血紅素濃度,即每百亳升之血紅素總重量公克。MonarkControllerCannot Connect to Monark無法連接MonarkMoxyDeviceConnecting ...
連線中...
ERROR: open failed: 錯誤:開啟失敗: Write error: %1
寫入錯誤:%1
Downloading ...
下載中...
Downloading ... [%1 bytes]下載中...[%1位元組]Parsing ... 解譯中...
Parsing ...
解譯中... File #%1: %2檔案 #%1: %2Failed to create temporary file 無法創建暫存檔
Importing %1 Ride(s)...
匯入%1次騎車紀錄...
No rides found to import.
未找到騎車紀錄Erase all records on Moxy從Moxy刪除所有紀錄read error: 讀取錯誤: read timeout讀取超時, read %1 bytes so far: "%2",已讀取%1位元組:"%2"failed to write '%1' to device: %2無法寫入%1至裝置:%2timeout writing '%1' to device寫入'%1'至裝置超時MoxyDevicesMake sure the Moxy is connected via USB請確認Moxy已通過USB連線MultiDeviceDialogMultiple Device Configuration多裝置配置Cancel取消Apply套用MultiModelVeloclinic MulticomponentNamedSearchesSwim游泳Bike騎車Run跑步NavigatorCellDelegateDate日期MMM d, yyyyyyyy年M月d日Time時間Last updated最後更新ddd MMM d, yyyy hh:mmyyyy年M月d日ddd, hh時:mm分NewAthletePagePerformanceCreate a new athleteProvide performance-related data about the athlete. If unsure, it is usually fine to start with the defaults.WJJsbpmbpmNone無min/kmmin/kmmin/milemin/mimin/100mmin/100mmin/100ydmin/100ydMaximum Power (PMax)Critical Power (CP) / FTPAnaerobic Capacity (W')W'bal TauResting Heartrate靜止心率Lactate Heartrate乳酸心率Maximum Heartrate最大心率Critical Velocity (CV) RunCritical Velocity (CV) SwimUse athlete's perspectives as templateNewAthletePageUserCreate a new athleteSpecify basic information about the new athlete.Unique name (mandatory)Male男性Female女性MetricImperial英制kgkglblbcmcmininAthlete Name運動員姓名Date of Birth生日SexUnits單位Weight體重Height高Bio自傳Choose Picture選擇照片ImagesNewAthleteWizardWelcome to GoldencheetahFatal Error嚴重錯誤Can't create new directory 無法新建檔案夾Athlete already exists 運動員檔案已存在NewCyclistDialogAthlete Name運動員姓名Date of Birth生日Sex姓別Units單位Bio自傳Critical Power (FTP)臨界功率(FTP)W'bal Tau (s)W'Bal τ (s)Resting Heartrate靜止心率Lactate Heartrate乳酸心率Maximum Heartrate最大心率CV Run (%1)跑步CV (%1)min/kmmin/kmmin/milemin/miCV Swim (%1)游泳CV (%1)min/100mmin/100mmin/100ydmin/100ydWeight (%1)體重 (%1)kgkglblbHeight (%1)身高 (%1)cmcmininMale男性Female女性Metric公制Imperial英制None無Save儲存Cancel取消Choose Picture選擇照片Images (*.png *.jpg *.bmp)影像格式Fatal Error嚴重錯誤Can't create new directory 無法新建檔案夾Athlete already exists 運動員檔案已存在Athlete name is mandatory運動員姓名為必要的項目NinetyFivePercentHeartRate95% Heartrate95% 心率bpmbpmHeart Rate for which 95% of activity samples has lower HR values比所有活動中95%的心率紀錄點的還要高的心率NolioCompleted.完成。NolioSync with your favorite training partner.NonZeroPowerNonzero Average Power不含零值平均功率wattswAverage Power without zero values, it gives inflated values when frecuent coasting is present不含零值之平均功率,若經常無踩踏滑行,其數值會偏高OAuthDialogOAuthOAuthSSL Security Libraries required for 'Authorise' are missing in this installation.此安裝缺少授權認證所需之SSL安全程式庫。Authorization Error授權錯誤Withings authorization was successful.Withings授權成功。Information資料Dropbox authorization was successful.Dropbox授權成功。SportTracks authorization was successful.SportTracks授權成功。Polar Flow authorization was successful.Polar Flow授權成功。Strava authorization was successful.Strava授權成功。Cycling Analytics authorization was successful.Cycling Analytics授權成功。Nolio authorization was successful.Azum authorization was successful.Error retrieving access token, %1 (%2)無法提取授權憑證%1 (%2)SSL Token Refresh ErrorSSL憑證刷新失敗OpenDataFetching server list.正在下載伺服器清單...Network Problem reading server list讀取伺服器清單網路異常Invalid server list, please try again later伺服器清單無效,請再試Finding an available server.正在尋找可用伺服器。No servers available, please try later.沒有可用伺服器,請再試。Preparing data to send.正在準備要上傳的資料。Sending data to server.正在上傳資料。Server replied:伺服器回應:Finishing.即將完成。Done結束OpenDataDialogOpenDataOpenData<b><big>OpenData Project</big></b><b><big>OpenData 專案</big></b>We have started a new project to collect user activity data to enable researchers, coaches and others to develop new models and solutions using real world data.<p>All data that is shared is <b>anonymous</b> and cannot be traced back to the original user, no personal data is shared and the workout data is limited to Power, Heartrate, Altitude, Cadence and Distance data along with metrics and distributions. No personally identifiable information is collected at all.<p>The data will be published to the general public in exactly the same format you have provided it in. And you can choose to remove your data at any time. You can also choose to opt out again in athlete preferences.<p><center>Your data will only be sent once every year or so.</center><br><b>WE WILL NOT</b>:<p>- Collect personal information <p>- Collect GPS information <p>- Collect notes or other metadata <p><p><br><b>WE WILL</b>:<p>- Collect basic athlete info: Gender, Year of Birth and UUID<p>- Collect basic activity samples for HR, Cadence, Power, Distance, Altitude<p>- Collect metrics for every activity stored for this athlete<p>- Collect distribution and mean-max aggregates of activity data<p><p><br>We publish the data at the <a href="https://cos.io/">Center for Open Science</a> as an <a href="https://osf.io/6hfpz/">OpenData project</a> open to everyone. <p>We have also setup an <a href="https://github.com/GoldenCheetah/OpenData">OpenData github project</a> to publish tools for working with the dataset.<p>Opendata是我們啟動的一個新專案,收集用戶活動數據提供給研究人員,教練和其他人去開發新的模型和解決方案。<p>所有分享數據均為<b>匿名</b>,無法追溯到原始用戶,且無法識別個人身份。分享的運動數據僅限於功率,心率,海拔,迴轉數,段速,距離以及計測量與其分佈。不會收集任何個人資料。<p>數據將以您提供的格式發布給公眾。您可以選擇在任何時候刪除您的數據,亦也可以運動員設定中選擇停止分享。<p><center>您的數據大概每年僅上傳一次。</center><br><b>我們不會</b>:<p>-收集個人資料 <p>- 收集GPS定位資料 <p>- 收集備註或其他額外數據 <p><p><br><b>我們會</b>:<p>- 收集基本運動員資料:性別,出生年及UUID<p>- 收集基本活動紀錄之功率,心率,海拔,迴轉數,距離<p>- 收集此卜動員之每一活動紀錄計測量<p>- 收集各活動紀錄數據分佈及平均最佳值<p><p><br>我們將於<a href="https://cos.io/">Open Science中心</a>以<a href="https://osf.io/6hfpz/">OpenData專案</a>形式將數據發佈給任何人查閱 <p>同時,亦通過<a href="https://github.com/GoldenCheetah/OpenData">OpenData github 專案</a>提供使用數據的工具。<p>Yes, I want to share是的,我要分享我的資料No thanks不要分享資料OverviewConfigDialogChart Settings圖表設定Tile SettingsRemove移除Close關閉Export匯出Export User ChartOpen file for export failed.OverviewItemConfigName名稱Export DataUser definedTotals總量Averages平均Maximums最大值Metrics計測量Zones區間Intervals區段Activities活動紀錄LegacyFilter過濾器MetricX Axis MetricY Axis MetricBubble Size MetricField NameZone SeriesPolarizedStart開始StopProgram程式Time時間Units單位BackgroundColor色彩OverviewWindowAdd Tile...Import Chart...匯入圖表...Settings...Minimum ColumnsImport user chart from fileNot importedWe only support importing valid User Charts built for this view at present.PDModelW': Formerly known as Anaerobic Work Capacity (AWC). An estimate for the fixed amount of work, expressed in kJ, that you can do above Critical Power.W':以前叫無氧能力容量(AWC),以kJ千焦耳為單位,能在臨界功率以上作功的總量。Critical Power. An estimate of the power that, theoretically, can be maintained for a long time without fatigue.臨界功率。理論上可持續很長時間而不會產生疲勞的預計功率輸出。Functional Threshold Power. The highest power that a rider can maintain in a quasi-steady state without fatiguing for approximately one hour.功能性閥值功率。騎乘者可在近乎平衡狀態下持續約一小時,不會產生疲勞的最高功率輸出。P-max: An estimate of the maximal power over one full rotation of the cranks.P-max:預估可作用一次大盤完整劃圓之最大功率輸出值。Base ModelRMSE %1 CV %4% R<sup>2</sup>=%3 [LR] %2 pointsRMSE %1 CV %3% [LM] %2 pointsRMSE %1 CV %3% [envelope] %2 pointsPMCDataCTL/LTS : Chronic Training Load/Long Term Stress. The dose of training you accumulated over a longer period of time, computed as an exponentially weighted moving average of the selected Training Load metric typically from 4-8 weeks, 42 days by default. It is claimed to relate to your fitness.CTL/LTS:長期訓練量/長期壓力。長時期累積之訓練量,以遞減加權移動平均方式計算4-8週(預設為42日)之訓練量。通常認為與身體體能相關。ATL/STS : Acute Training Load/Short Term Stress. The dose of training that you accumulated over a short period of time, computed as an exponentially weighted moving average of the selected Training Load metric from 3 to 10 days in general, 7 by default. It is claimed to relate to your fatigue.ATL/STS:短期訓練量/短期壓力。短時期累積之訓練量,以遞減加權移動平均方式計算3-10日(預設為7日)之訓練量。通常認為與身體疲勞相關。TSB/SB : Training Stress Balance/Stress Balance. It's the result of subtracting yesterday's Acute Training Load/Short Term Stress from yesterday's Chronic Training Load/Long Term Stress. It is claimed to relate to your freshness.TSB/SB:訓練壓力平衡。即昨天的CTL/LTS減昨天的ATL/STS。通常認為與身體狀態相關。RR : Ramp Rate. The rate at which CTL/LTS increases over a given time period. Large values up and down indicate a risk of injury and aggressive taper respectively.RR:升率,即CTL/LTS隨時間上升速度,數字過大或小分別代表傷害風險提高或訓練過分減量。PMCOverviewItemForm狀態Fitness體能Fatigue疲勞Risk風險PacePace段速min/kmmin/kmmin/milemin/miAverage Speed expressed in pace units: min/km or min/mile平均速度以段速單位表示:min/km或min/miPaceRowPace Rowmin/500mmin/100m {500m?}Average Speed expressed in min/500mPaceSchemePage++--Add新增Delete刪除%%Short簡稱Long全名Percent of CVCV百分比Maximum of 10 zones reached.僅允許設定10個區間。New新建New (%1)新建 (%1)PaceSwimPace Swim游泳段速min/100mmin/100mmin/100ydmin/100ydAverage Speed expressed in swim pace units: min/100m or min/100yd平均速度以游泳段速單位表示:min/100m或min/100ydPaceZonePTime1P1 Percent in Pace ZoneP1百分比Percent of Time in Pace Zone 1.段速區間1所佔時間百分比。PaceZonePTime10P10 Percent in Pace ZoneP10百分比Percent of Time in Pace Zone 10.段速區間10所佔時間百分比。PaceZonePTime2P2 Percent in Pace ZoneP2百分比Percent of Time in Pace Zone 2.段速區間2所佔時間百分比。PaceZonePTime3P3 Percent in Pace ZoneP3百分比Percent of Time in Pace Zone 3.段速區間3所佔時間百分比。PaceZonePTime4P4 Percent in Pace ZoneP4百分比Percent of Time in Pace Zone 4.段速區間4所佔時間百分比。PaceZonePTime5P5 Percent in Pace ZoneP5百分比Percent of Time in Pace Zone 5.段速區間5所佔時間百分比。PaceZonePTime6P6 Percent in Pace ZoneP6百分比Percent of Time in Pace Zone 6.段速區間6所佔時間百分比。PaceZonePTime7P7 Percent in Pace ZoneP7百分比Percent of Time in Pace Zone 7.段速區間7所佔時間百分比。PaceZonePTime8P8 Percent in Pace ZoneP8百分比Percent of Time in Pace Zone 8.段速區間8所佔時間百分比。PaceZonePTime9P9 Percent in Pace ZoneP9百分比Percent of Time in Pace Zone 9.段速區間9所佔時間百分比。PaceZonePTimeIPI Percent in Pace ZonePercent of Time in Pace Zone I - Below AeTPaceZonePTimeIIPII Percent in Pace ZonePercent of Time in Pace Zone II - Between AeT and CVPaceZonePTimeIIIPIII Percent in Pace ZonePercent of Time in Pace Zone III - Above CVPaceZonePageSport運動種類Run跑步Swim 游泳Critical Velocity臨界速度Default預設PaceZoneTimesecondssPaceZoneTime1P1 Time in Pace ZoneP1時間secondssTime in Pace Zone 1.段速區間1內所佔的時間PaceZoneTime10P10 Time in Pace ZoneP10時間secondssTime in Pace Zone 10.段速區間10內所佔的時間PaceZoneTime2P2 Time in Pace ZoneP2時間secondssTime in Pace Zone 2.段速區間2內所佔的時間PaceZoneTime3P3 Time in Pace ZoneP3時間secondssTime in Pace Zone 3.段速區間3內所佔的時間PaceZoneTime4secondssP4 Time in Pace ZoneP4時間Time in Pace Zone 4.段速區間4內所佔的時間PaceZoneTime5P5 Time in Pace ZoneP5時間secondssTime in Pace Zone 5.段速區間5內所佔的時間PaceZoneTime6P6 Time in Pace ZoneP6時間secondssTime in Pace Zone 6.段速區間6內所佔的時間PaceZoneTime7P7 Time in Pace ZoneP7時間secondssTime in Pace Zone 7.段速區間7內所佔的時間PaceZoneTime8P8 Time in Pace ZoneP8時間secondssTime in Pace Zone 8.段速區間8內所佔的時間PaceZoneTime9P9 Time in Pace ZoneP9時間secondssTime in Pace Zone 9.段速區間9內所佔的時間PaceZoneTimeIsecondsPI Time in Pace ZoneTime in Pace Zone I - Below AeTPaceZoneTimeIIsecondsPII Time in Pace ZoneTime in Pace Zone II - Between AeT and CVPaceZoneTimeIIIsecondsPIII Time in Pace ZoneTime in Pace Zone III - Above CVPaceZonesActive Recovery動態恢復Endurance耐力區間TempoTempo區間Threshold閾値區間VO2MaxVO2Max區間Anaerobic無氧區間can't open file檔案讀取失敗Zone defaults must be specified at head of %1 file區間之預設定義必須於%1檔案的表頭描述Only one set of zone defaults may be specified in %1 file%1檔案內僅允許一組區間之預設定義line %1: read new range without reading any zones for previous one第%1行:未讀取前一區間前讀取新範圍數值line %1: read zone without preceding date range第%1行:讀取區間但無相對之時間範圍attempt to set zone based on % of CV without setting CV in line number %1.
未設定CV%1無法以CV百分比設定區間file ended without reading any zones for last range未讀取最後範圍之區間定義,檔案已結束Setting end date of range %1 to start date of range %2.
將範圍%1之結束日定義成範圍%2起始日Extending final range %1 to infinite to include present date.
將範圍%1延長之永久,以包含當天日期。CV must be greater than zero in zone range %1 of %2在區段%2定義範圍%1,CV必須大於零Range %1: matching top of zone %2 (%3) to bottom of zone %4 (%5).
範圍%1:將區間上限%2 (%3)匹配至區間下限%4 (%5)。Range %1: setting top of zone %2 from %3 to MAX.
範圍%1:將區間上限%2設定從%3修正至MAX。Critical Velocity: %3%4 (%2%1)臨界速度: %3%4 (%2%1)<td align="center">Zone</td><td align="center">區間</td><td align="center">Description</td><td align="center">説明</td><td align="center">Low (%1)</td><td align="center">低(%1)</td><td align="center">High (%1)</td><td align="center">高(%1)</td><td align="center">Time</td><td align="center">時間</td><td align="center">%</td><td align="center">%</td>Problem Saving Pace Zones無法儲存段速區間File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀min/100mmin/100mmin/100ydmin/100ydmin/kmmin/kmmin/milemin/miPacingIndexPacing Index配速指數%%Pacing Index is Average Power as a percent of Maximal Power配速指數是從平均功率,以最大功率的百分比表示。PasteSpecialDialogPaste mode貼上模式Separator options分隔字元選項Columns列Append添加Overwrite覆寫First line has headings第一行為表頭TabTabComma逗點Semi-colon分號Space空白Other其它Column Type列種類OKOKCancel取消Ignore忽略Paste Special特殊貼上Time時間Distance距離Speed速度Cadence迴轉數Power功率Heartrate心率Torque扭矩Latitude緯度Longitude經度Altitude標高Headwind逆風Slope坡度Temperature溫度SmO2SmO2tHbtHbInterval區段Paste error貼上錯誤Please select target cell or cells to paste values into.請選擇要貼上的目標欄位Copy/Paste Mismatch複製/貼上不匹配The selected range and available data have different sizes, some data may be lost.
Do you want to continue?選中的範圍與剪貼簿的數據大小不同,可能導致數據丟失。
是否要繼續?PeakHr10m10 min Peak Hr10min最大心率bpmbpmPeakHr1m1 min Peak Hr1min最大心率bpmbpmPeakHr20m20 min Peak Hr20min最大心率bpmbpmPeakHr2m2 min Peak Hr2min最大心率bpmbpmPeakHr30m30 min Peak Hr30min最大心率bpmbpmPeakHr3m3 min Peak Hr3min最大心率bpmbpmPeakHr5m5 min Peak Hr5min最大心率bpmbpmPeakHr60m60 min Peak Hr60min最大心率bpmbpmPeakHr8m8 min Peak Hr8min最大心率bpmbpmPeakHr90m90 min Peak Hr90min最大心率bpmbpmPeakPace10m10 min Peak Pace10min最高段速min/kmmin/kmmin/milemin/miPeakPace10s10 sec Peak Pace10s最高段速min/kmmin/kmmin/milemin/miPeakPace15s15 sec Peak Pace15s最高段速min/kmmin/kmmin/milemin/miPeakPace1m1 min Peak Pace1min最高段速min/kmmin/kmmin/milemin/miPeakPace20m20 min Peak Pace20min最高段速min/kmmin/kmmin/milemin/miPeakPace20s20 sec Peak Pace20s最高段速min/kmmin/kmmin/milemin/miPeakPace2m2 min Peak Pace2min最高段速min/kmmin/kmmin/milemin/miPeakPace30m30 min Peak Pace30min最高段速min/kmmin/kmmin/milemin/miPeakPace30s30 sec Peak Pace30s最高段速min/kmmin/kmmin/milemin/miPeakPace3m3 min Peak Pace3min最高段速min/kmmin/kmmin/milemin/miPeakPace5m5 min Peak Pace5min最高段速min/kmmin/kmmin/milemin/miPeakPace60m60 min Peak Pace60min最高段速min/kmmin/kmmin/milemin/miPeakPace8m8 min Peak Pace8min最高段速min/kmmin/kmmin/milemin/miPeakPace90m90 min Peak Pace90min最高段速min/kmmin/kmmin/milemin/miPeakPaceHr10m10 min Peak Pace HR10min最高段速之心率bpmbpmAverage Heart Rate for 10 min Peak Pace interval10min最高段速時之平均心率PeakPaceHr1m1 min Peak Pace HR1min最高段速之心率bpmbpmAverage Heart Rate for 1 min Peak Pace interval1min最高段速時之平均心率PeakPaceHr20m20 min Peak Pace HR20min最高段速之心率bpmbpmAverage Heart Rate for 20 min Peak Pace interval20min最高段速時之平均心率PeakPaceHr30m30 min Peak Pace HR30min最高段速之心率bpmbpmAverage Heart Rate for 30 min Peak Pace interval30min最高段速時之平均心率60 min Peak Pace HR60min最高段速之心率Average Heart Rate for 60 min Peak Pace interval60min最高段速時之平均心率PeakPaceHr5m5 min Peak Pace HR5min最高段速之心率bpmbpmAverage Heart Rate for 5 min Peak Pace interval5min最高段速時之平均心率PeakPaceSwim10m10 min Peak Pace Swim10min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim10s10 sec Peak Pace Swim10s最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim15s15 sec Peak Pace Swim15s最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim1m1 min Peak Pace Swim1min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim20m20 min Peak Pace Swim20min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim20s20 sec Peak Pace Swim20s最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim2m2 min Peak Pace Swim2min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim30m30 min Peak Pace Swim30min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim30s30 sec Peak Pace Swim30s最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim3m3 min Peak Pace Swim3min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim5m5 min Peak Pace Swim5min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim60m60 min Peak Pace Swim60min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim8m8 min Peak Pace Swim8min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPaceSwim90m90 min Peak Pace Swim90min最高游泳段速min/100mmin/100mmin/100ydmin/100ydPeakPercentMMP PercentageMMP百分比%%Average Power as Percent of Mean Maximal Power for Duration.在本次活動紀錄中持續時間之平均功率與平均最大功率MMP之百分比。PeakPower10m10 min Peak Power10min最大輸出功率wattswPeakPower10s10 sec Peak Power10s最大輸出功率wattswPeakPower15s15 sec Peak Power15s最大輸出功率wattswPeakPower1m1 min Peak Power1min最大輸出功率wattswPeakPower1s1 sec Peak Power1s最大輸出功率wattswPeakPower20m20 min Peak Power20min最大輸出功率wattswPeakPower20s20 sec Peak Power20s最大輸出功率wattswPeakPower2m2 min Peak Power2min最大輸出功率wattswPeakPower30m30 min Peak Power30min最大輸出功率wattswPeakPower30s30 sec Peak Power30s最大輸出功率wattswPeakPower3m3 min Peak Power3min最大輸出功率wattswPeakPower5m5 min Peak Power5min最大輸出功率wattswPeakPower5s5 sec Peak Power5s最大輸出功率wattswPeakPower60m60 min Peak Power60min最大輸出功率wattswPeakPower8m8 min Peak Power8min最大輸出功率wattswPeakPower90m90 min Peak Power90min最大輸出功率wattswPeakPowerHr10m10 min Peak Power HR10min最大輸出功率之心率bpmbpmAverage Heart Rate for 10 min Peak Power interval10min最高輸出功率時之平均心率PeakPowerHr1m1 min Peak Power HR1min最大輸出功率之心率bpmbpmAverage Heart Rate for 1 min Peak Power interval1min最高輸出功率時之平均心率PeakPowerHr20m20 min Peak Power HR20min最大輸出功率之心率bpmbpmAverage Heart Rate for 20 min Peak Power interval20min最高輸出功率時之平均心率PeakPowerHr30m30 min Peak Power HR30min最大輸出功率之心率bpmbpmAverage Heart Rate for 30 min Peak Power interval30min最高輸出功率時之平均心率PeakPowerHr5m5 min Peak Power HR5min最大輸出功率之心率bpmbpmAverage Heart Rate for 5 min Peak Power interval5min最高輸出功率時之平均心率PeakPowerHr60m60 min Peak Power HR60min最大輸出功率之心率bpmbpmAverage Heart Rate for 60 min Peak Power interval60min最高輸出功率時之平均心率PeakPowerIndexPeakPowerIndex%%Peak Power IndexPeakWPKw/kgw/kgPeakWPK10m10 min Peak WPK10min最高wkg10 min Peak Power relative to Athlete Weight.10min最高功率輸出時之功率體重比PeakWPK10s10 sec Peak WPK10s最高wkg10 sec Peak Power relative to Athlete Weight.10s最高功率輸出時之功率體重比PeakWPK15s15 sec Peak WPK15s最高wkg15 sec Peak Power relative to Athlete Weight.15s最高功率輸出時之功率體重比PeakWPK1m1 min Peak WPK1min最高wkg1 min Peak Power relative to Athlete Weight.1min最高功率輸出時之功率體重比PeakWPK1s1 sec Peak WPK1s最高wkg1 sec Peak Power relative to Athlete Weight.1s最高功率輸出時之功率體重比PeakWPK20m20 min Peak WPK20min最高wkg20 min Peak Power relative to Athlete Weight.20min最高功率輸出時之功率體重比PeakWPK20s20 sec Peak WPK20s最高wkg20 sec Peak Power relative to Athlete Weight.20s最高功率輸出時之功率體重比PeakWPK30m30 min Peak WPK30min最高wkg30 min Peak Power relative to Athlete Weight.30min最高功率輸出時之功率體重比PeakWPK30s30 sec Peak WPK60s最高wkg30 sec Peak Power relative to Athlete Weight.60s最高功率輸出時之功率體重比PeakWPK5m5 min Peak WPK5min最高wkg5 min Peak Power relative to Athlete Weight.5min最高功率輸出時之功率體重比PeakWPK5s5 sec Peak WPK5s最高wkg5 sec Peak Power relative to Athlete Weight.5s最高功率輸出時之功率體重比PerspectiveTitle名稱Unable to process chart file無法處理圖表檔案Bad chart type (%1).圖表種類有誤 (%1)。Are you sure you want to remove the chart?你確定要移除此圖表?Remove移除Ride Log 騎乘記錄Aerobic Power有氧功率輸出Anaerobic Power無氧功率輸出Cadence迴轉數Calendar行事曆CPDetails詳細資訊Distance距離Edit編輯Elapsed Time歷時Heartrate心率LapMap地圖Performance個人表現PMCPMCPowerQA象限分析Ride騎乘記錄Speed速度Summary總結Target Power目標功率Time and Distance時間與距離Time In Zone區間時間W' In ZoneW'區間時間Sustained In Zone區間持續時間Training Mix各項訓練Navigator領航員W/kgw/kgWorkout訓練課表Stress壓力Scatter分佈圖HrPw心跳功率反應Activity Log活動紀錄Tracker追蹤器CP HistoryCP歷程Library資料庫CV臨界速度PerspectiveDialogManage PerspectivesPerspectivesCharts圖表Edit編輯Import匯入Export匯出Delete刪除Drag charts to move to a perspectiveExport PersepctiveExport PerspectiveNo perspective file selected!GoldenCheetah Perspective Files (*.gchartset)Select Perspective file to importImport PerspectivePfPvDoubleClickPicker%1 rpm, %2 watts%1 rpm, %2 wPfPvPlotAverage Effective Pedal Force (N)平均有效踏板施力 (N)Circumferential Pedal Velocity (m/s)圓週踏板速率 (m/s)PfPvWindowWatts:輸出功率 (w):RPM:rpm:Gear Ratio Display齒比顯示Shade zones區間上色Merge intervals區段合併顯示Frame intervals區段分列顯示Crank Length (m):曲柄長 (m):P Max:PMax:PolarFlowNetwork Problem reading Polar Flow data讀取Polar Flow網路異常problem parsing Polar Flow data無法解譯Polar Flow資料You must authorise with Polar Flow first必須先授權Polar FlowCompleted.完成。PolarFlowPolarFlowDownload from the popular Polar website.從Polar網站下載。PowerHistTime (minutes)時間 (min)Time (percent)時間 (%)Power (watts)輸出功率(w)Power zone功率區間Heartrate (bpm)心率 (bpm)Heartrate zone心率區間secondssTotal %1 (%2)總量%1 (%2)Total %1總量%1%1 of Activity (%2)活動紀錄之%1 (%2)%1 of Activity活動紀錄之%1W'bal zoneW'Bal區間W'Bal Consumed (%)耗用W' (%)Power (watts/kg)功率 (w/kg)aPower (watts)aPower (w)Cadence (rpm)迴轉數 (rpm)Pace zone段速區間Speed (%1)速度 (%1)kphkphmphmphTorque (%1)扭矩 (%1)N-mN-mft-lbfft-lbfGear Ratio齒輪比SmO2SmO2Unknown data series未知資料序列min/kmmin/kmmin/milemin/mi
%1 Pace (%2)段速%1 (%2)min/100mmin/100mmin/100ydmin/100ydminutes分%%PowerIndexPower Index功率指數%%PowerInfoWidgetAverage Power平均輸出功率xPowerxPowerIso PowerIsoPowerPowerTapDevicesMake sure the PowerTap unit is turned
on and that its display says, "Host"請確認PowerTap已經啟動且其顯示為HostReading version...正在讀取版本號...Reading header...正在讀取表頭...download cancelled下載已取消failed to write %1 to device: %2無法寫入%1至裝置:%2timeout writing %1 to device寫入'%1'至裝置超時failed to read back hardware echo: %2無法讀取硬體回應:%2timeout reading back hardware echo讀取硬體回應超時read error: 讀取錯誤: read timeout讀取超時, read %1 bytes so far: "%2",已讀取%1位元組:"%2"ERROR: open failed: 錯誤:開啟失敗: Error reading version: 讀取版本號錯誤: Unrecognized version "%1"未知的版本號 "%1"ERROR: reading header: 錯誤!表頭讀取: ERROR: timeout reading header錯誤!表頭讀取超時Reading data...正在讀取資料...Failed to find start time.無法找到起始時間。ERROR: reading first two: 錯誤!讀取前兩項: ERROR: timeout reading first two錯誤!前兩項讀取超時ERROR: reading block: 錯誤!讀取區塊: ERROR: timeout reading block錯誤!讀取區塊超時ERROR: bad checksum錯誤!校驗碼錯誤progress: %1:%2進度:%1:%2Failed to create temporary file 無法創建暫存檔 PowerZonePower Zone功率區間Power Zone fractional number determined from Average Power.從平均輸出功率計算之功率區間數值。ProcessorPageNone無On ImportOn SaveProcessor處理AutomationHide Core Processors<center><h1>No Processor selected</h1></center>Core ProcessorCustom Python ProcessorAutomated execution onlyUse as FilterDefault SettingsDescription説明Are you sure you want to delete %1?Apply套用Settings設定Manual手動Import匯入Save儲存PythonChartWeb chartingShow Console顯示指令提示視窗Warning: Python is disabledPythonConsolePython Console (%1)Python指令提示視窗 (%1)QObjectBiking騎車Cycling騎車Cycle騎車Bike騎車Lap %1第%1圈MMM dd
yyyyyyyy年
M月d日All全部Activities活動紀錄File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀Problem Saving MeasuresProblem Reading MeasuresFile: %1 cannot be opened for 'Reading'. Please check file properties.檔案:%1 無法讀取,請確認檔案屬性。Problem Parsing MeasuresFile: %1 is not a proper JSON file. Parsing error: %2檔案:%1 不是正確的JSON檔。解譯器錯誤:%2Problem Saving Workout Library儲存至訓練課表資料庫發生問題Problem Saving Named Search Configuration儲存至搜尋設定檔發生問題Problem Saving Autoimport Configuration儲存至自動匯入設定發生問題Problem Saving Route Data儲存路徑資料發生問題Problem Saving Seasons儲存季度發生問題Error creating meter新增計測量失敗Unknown start element English英文French法文Japanese日文Portugese (Brazil)葡文(巴西)Italian意大利文German德文Russian俄文Czech捷克文Spanish西班牙文Portugese葡文Chinese (Traditional)正體中文Other其它Chinese (Simplified)簡體中文Dutch荷蘭文Swedish瑞典文Run跑步Swim游泳Unsupported file format未支援檔案格式User ChartUser defined interactive chartMetricMetric and SparklineKPIKPI calculation and progress barTableTable of dataBests最佳成績Ranked list of bestsMetadataMetadata and SparklineZones區間Zone HistogramRPE體感強度RPE WidgetIntervals區段Interval Bubble ChartActivities Bubble ChartPMCPMCPMC Status SummaryRoute路線Route SummaryDonutMetric breakdown by categoryRest靜止Very, very easy極端容易Easy容易Moderate適中Somewhat hard有點難Hard困難Hard+困難+Very hard非常困難Very hard+非常困難+Very hard++非常困難++Maximum最高難度Invalid無效Distance %1距離 %1Location %1地點 %1Time %1時間 %1HeartRate %1心率 %1Python not installed or in pathPyton未安裝或路徑不正確Python v3.%1 is required for Python embedding.
Python disabled in preferences.使用內嵌Python必須安裝Python v3.%1。
已於設定中禁用Python。The version of R installed is too old. You must have R version 3.4 or higher.
安裝的R版本過舊,請使用3.4或以後版本。The version of R installed is too new. You must have R version 3.3 or older.
安裝的R版本過新,請使用3.3或以前版本。ContinuousDate日期Time時間Category分組Athlete運動員Athlete CardRChartUse GC chartsShow Console顯示指令提示視窗Warning: R is disabledRConsoleR Console (%1)R指令提示視窗 (%1)RLibraryR lib: failed to resolve symbol: '%1'R_HOME has not been configured in options or the system environment so we looked in the common places to find the R install.
The R library was found at '%1'
We failed to find the R shared libraries.The dynamic library load failed.RRNormalFractionFraction of normal RR intervalsRR正常區段之比例pct%Measure of RR readabilityRR可讀性之測量值RTPRTPRTPwattswRun Threshold Power, computed from Critical Velocity using the GOVSS related algorithm利用臨界速度及GOVSS相關公式計算之跑步臨界功率RealtimeDataNone無Time時間Lap圈數Lap Time單圈時間Lap Time Remaining單圈剩餘時間Section Time Remaining階段剩餘時間BikeStressBikeStresskJouleskJW' balW'BalXPowerxPowerIso PowerIsoPowerIntensity Factor強度系數Relative Intensity相對強度Skiba Variability IndexSkiba變量指數Variability Index變量指數Distance距離Route DistanceDistance RemainingAlternate Power額外功率源Power輸出功率Speed速度Virtual Speed虛擬速度Cadence迴轉數Heart Rate心率Target Power目標功率Average Power平均輸出功率Average Speed平均速度Average Heartrate平均心率Average Cadence平均迴轉數Lap Power單圈功率Lap Speed單圈速度Lap Heartrate單圈心率Lap Cadence單圈迴轉數Left/Right Balance左/右平衡Total Hb Mass總Hb重量Hb O2 SaturationHbO2 濃度Deoxy Hb缺氧HbOxy Hb帶氧HbLeft Torque Effectiveness左扭矩效率Right Torque Effectiveness右扭矩效率Left Pedal Smoothness左踏板平滑度Right Pedal Smoothness右踏板平滑度Right Power Phase Start右側功率分佈PP起始角度Right Power Phase End右側功率分佈PP結束角度Right Power Phase Peak StartRight Power Phase Peak EndSlope坡度Lap Distance單圈距離Lap Distance Remaining單圈剩餘距離Latitude緯度Longitude經度Altitude標高Respiratory FrequencyVentilationVO2VCO2Respiratory Exchange RatioTidal VolumeFraction O2 ExpiredTemperature溫度CoreTempRealtimePlotWindowShow顯示Heart Rate心率Speed速度Cadence迴轉數Power輸出功率Alternate Power額外功率源30s Power30秒功率SmO2SmO2tHbtHbO2HbO2HbHHbHHbSmoothing (5Hz Samples)平滑化(5Hz數據點)ReferenceLineDialogReferences對照項目Reference:對照:WattswBPMbpm + + Series序列Value値Power輸出功率Heart Rate心率RelWattagePageWorkout Wizard訓練課表精靈Relative Wattage Workout Creator, current CP = %%Time (minutes)時間 (min)MinutesminWattage瓦特數Save Workout儲存訓練課表Computrainer Format *.mrcComputrainer 格式 *.mrcRelativeIntensityRelative Intensity相對強度Relative Intensity is the ratio between xPower and the Critical Power (CP) configured in Power Zones, similar to IF.相對強度類似IF,是xPower及功率區間設定臨界功率(CP)之比。RemoteControlStart開始StopLapHigherLowerCalibrateRemotePageAction動作ANT+ CommandANT+指令<unset>RemoveXDataCommandRemove XData刪除XDataRemoveXDataSeriesCommandRemove XData Series刪除XData序列RenameIntervalDialogRename Intervals將區段重新命名&OK確定(&O)&Cancel取消(&C)ResponseIndexResponse Index反應指數The ratio between xPower and Average HR, similar to Efficiency Factor類似效率指數,為xPower與平均心率比RideAutoImportRuleNo autoimport無自動匯入Autoimport with dialog以對話方塊自動匯入Autoimport with dialog - past 90 days以對話方塊自動匯入最近90天紀錄Autoimport with dialog - past 180 days以對話方塊自動匯入最近180天紀錄Autoimport with dialog - past 360 days以對話方塊自動匯入最近360天紀錄Autoimport in background在背景自動匯入Autoimport in background - past 90 days在背景自動匯入最近90天紀錄Autoimport in background - past 180 days在背景自動匯入最近180天紀錄Autoimport in background - past 360 days在背景自動匯入最近360天紀錄RideCacheCan't rename %1 to %2 in %3%3 無法重新命名 %1 至 %2Problem Saving Ride Cache無法儲存騎乘快取資料File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀seconds秒RideCountCould not open ride file: "無法打開騎車紀錄檔: "Can't find units in first line: "無法從首行找到單位: "Unknown ride metric "%1".未知的計測"%1"。Activities活動紀錄Activity Count活動紀錄數量RideDateActivity DateRideEditorSave儲存Find尋找Undo復原Redo重做Anomalies異常數據XDataXDataTime時間Distance距離Power輸出功率Heartrate心率Cadence迴轉數Speed速度Torque扭矩Altitude標高Latitude緯度Longitude經度Headwind逆風Slope坡度Temperature溫度Left/Right Balance左/右平衡Left TE左TERight TE右TELeft PS左PSRight PS右PSLeft Platform Center Offset左側踏板施力偏移PCORight Platform Center Offset右側踏板施力偏移PCOLeft Power Phase Start左側功率分佈PP起始角度Left Power Phase End左側功率分佈PP結束角度Right Power Phase Start右側功率分佈PP起始角度Right Power Phase End右側功率分佈PP結束角度Left Peak Power Phase Start左側峰值功率分佈PP起始角度Left Peak Power Phase End左側峰值功率分佈PP結束角度Right Peak Power Phase Start右側峰值功率分佈PP起始角度Right Peak Power Phase End右側峰值功率分佈PP結束角度SmO2SmO2tHbtHbVertical Oscillation重直振幅Run Cadence跑動步頻GCTGCTInterval區段Core Temperature核心溫度Delete XDATA Series刪除XData序列You are about to permanently remove the XDATA series '%1' from the activity
Do you want to continue?你即將要從活動紀錄永久刪除XDATA序列%1
是否要繼續?Basic DataCut剪下Copy複製Paste貼上Paste Special...…Clear Contents清除內容Smooth Anomaly異常值浮滑處理Delete Row刪除行Insert Row插入行Remove Column刪除列Add Column新增列Paste error貼上錯誤Please select target cell or cells to paste values into.請選擇目標欄位將數值貼上Copy buffer and selected area are diffferent sizes.剪貼簿內容與選定區域之大小不同。Copy buffer has more columns than available.剪貼簿內容有更多列。Copy buffer has more rows than available.剪貼簿內容有更多行。RideFileRun跑步Running跑步Swim 游泳SwimmingRowRowingSkiXC SkiCross Countr SkiingGymStrengthWalkWalkingTime時間Cadence迴轉數Heartrate心率Distance距離Speed速度Acceleration加速率Power %1功率 %1Cadence %1迴轉數 %1Torque %1扭矩 %1Heartrate %1心率 %1Torque扭矩Power功率xPowerxPoweraPoweraPoweraTISS有氧TISSanTISS無氧TISSIso PowerIsoPowerAltitude標高Longitude經度Latitude緯度Headwind逆風Slope坡度Temperature溫度Left/Right Balance左/右平衡Left Torque Efficiency左扭矩效率Right Torque Efficiency右扭矩效率Left Pedal Smoothness左踏板平滑度Left Platform Center Offset左側踏板施力偏移PCORight Platform Center Offset右側踏板施力偏移PCOLeft Power Phase Start左側功率分佈PP起始角度Right Power Phase Start右側功率分佈PP起始角度Left Power Phase End左側功率分佈PP結束角度Right Power Phase End右側功率分佈PP結束角度Left Peak Power Phase Start左側峰值功率分佈PP起始角度Right Peak Power Phase Start右側峰值功率分佈PP起始角度Left Peak Power Phase End左側功率分佈PP結束角度Right Peak Power Phase End右側峰值功率分佈PP結束角度Interval區段VAMVAMWatts per Kilogram每公斤的瓦特數W' balanceW'BalSmO2SmO2THbtHbO2HbO2HbHHbHHbVertical Oscillation重直振幅Run Cadence跑動步頻GCTGCTGear Ratio齒輪比W' Consumed耗用W'Sample Index採樣指數Core Temperature核心溫度Unknown未知secondssrpmrpmrpm/srpm/sbpmbpmbpm/sbpm/skmkmmilesmikphkphmphmphm/s/sm/s/sNNN/sN/swattswwatts/sw/sTISSTISSmetresmfeetftlonlonlatlat%%°°mmmmBike騎車Biking騎車CycleCycling騎車Right Pedal Smoothness右踏板平滑度°C°Cmeters per hourm/hrwatts/kgw/kgjoulesJg/dLg/dLspmspmcmcmmsmsratio比例Wheelsize輪徑RideFileIntervalALL全部DEVICE裝置USER使用者定義PEAK PACE段速峰值PEAK POWER功率峰值SEGMENTS區段CLIMBING爬坡EFFORTS間歇The entire activity整個活動紀錄Device specific intervals裝置之特定區段User defined laps or marked intervals使用者定義計圈或自選之區段Peak pace for running and swimming跑步及游泳之峰值段速Peak powers for cycling 1s thru 1hr1秒至1小時之騎車功率峰值Route segments using GPS dataGPS數據之路線區段Ascents for hills and mountains山丘爬升區段Sustained efforts and matches using power功率持續間隔或點火區段Peak峰值Find尋找Match點火Climb爬坡Best最佳RideFileTableModelTime時間Distance距離Power輸出功率Torque扭矩Cadence迴轉數Heartrate心率Speed速度Altitude標高Latitude緯度Longitude經度Headwind逆風Slope坡度Temperature溫度Core Temperature核心溫度Left/Right Balance左/右平衡Left TE左TERight TE右TELeft PS左PSRight PS右PSLeft Platform Center Offset左側踏板施力偏移PCORight Platform Center Offset右側踏板施力偏移PCOLeft Power Phase Start左側功率分佈PP起始角度Left Power Phase End左側功率分佈PP結束角度Right Power Phase Start右側功率分佈PP起始角度Right Power Phase End右側功率分佈PP結束角度Left Peak Power Phase Start左側峰值功率分佈PP起始角度Left Peak Power Phase End左側峰值功率分佈PP結束角度Right Peak Power Phase Start右側峰值功率分佈PP起始角度Right Peak Power Phase End右側峰值功率分佈PP結束角度SmO2SmO2tHbtHbRun Cadence跑動步頻Vertical Oscillation重直振幅GCTGCTInterval區段RideImportWizardSelect Date...選擇日期...Today今天Last Monday上星期一Last Tuesday上星期二Last Wednesday上星期三Last Thursday上星期四Last Friday上星期五Last Saturday上星期六Last Sunday上星期天Choose Date選擇日期Cancel取消Abort停止Error - File does not exist.錯誤 - 檔案不存在。Filename檔名Date日期Time時間Duration持續時間Distance距離Import Status匯入狀態Step 1 of 4: Check file permissions第一步:確認檔案的權限Error - Not a file.錯誤 - 不是檔案。Error - File is not readable.錯誤 - 無法讀取檔案。Error - Opendata summary.錯誤 - Opendata 概覽。undefined未定義Queued已加入隊列Error - Unknown file type錯誤 - 未知的檔案格式Step 2 of 4: Validating Files第二步:檔案驗證Error錯誤Parsing...解析中...Validated驗證結束Warning - 警告 - ;;Step 3 of 4: %1 ride(s) are missing the date and time.第三步:%1個檔案缺少時間及日期。Step 3 of 4: Change Date/Time or Save to continue.第三步:修改時間/日期或按儲存以繼續。No files for automatic import selected.未選擇自動匯入之檔案More than 24hrs of activities to fit into a day一天內之活動紀錄超過24小時Auto Import自動匯入Automatic import from defined directories is completed.從指定檔案夾自動匯入動作完成。Error - Activity file exists錯誤 - 活動紀錄檔案已存在Error - Activity file with same start date/time exists錯誤 - 相同起始日期及時間之活動紀錄檔案已存在Error - copy of %1 to import directory failed錯誤 - 複製%1到匯入檔案夾失敗Processing...處理中...Error - Moving %1 to activities folder錯誤 - 移動%1至活動紀錄檔案夾Error - .JSON creation failed錯誤 - JSON建立失敗Error - Import of activitiy file failed錯誤 - 匯入活動紀錄檔失敗Error - 錯誤 - Directory檔案夾Import Rule匯入規則Directory Status檔案夾狀態No import沒有匯入No directory未找到檔案夾Directory not available檔案夾不存在Directory not readable檔案夾不可讀%1 files for import selected已選擇%1個檔案進行匯入No files in requested time range選擇之時間範圍無檔案No activity files found未找到活動紀錄Import Files匯入檔案Save儲存Invalid Selection無效的選擇Step 4 of 4: Save to Library第四步:資料庫存檔Saving...儲存中...Saving file...存檔中...File Saved檔案已儲存Import Complete. %1 of %2 successful.匯入完成 %1/%2成功。Finish完成RideItemEntire Activity整個活動紀錄1 second1s5 seconds5s10 seconds10s15 seconds15s20 seconds20s30 seconds30s1 minute1min5 minutes5min10 minutes10min20 minutes20min30 minutes30min45 minutes45min1 hour1hr%1 (%2 watts)%1 (%2w)%1 (%2 %3)%1 (%2 %3)L%3 TTE of %1 (%2 watts)L%3 TTE 持續時間 %1 (%2w)L%4 %3% EFFORT of %1 (%2 watts)L%4 %3% 間歇 持續時間 %1 (%2w)L%3 SPRINT of %1 secs (%2 watts)L%3 衝刺 持續時間 %1s (%2w)Climb %1爬坡 %1L%1 %5 %2 (%3w %4 kJ)L%1 %5 %2 (%3w %4kJ)TE MATCH點火至力竭 TEMATCH點火RideMapWindowOpenStreetMapOpenStreetMapGoogleGoogleMap地圖Show Markers顯示標記Show Full Plot顯示全圖Hide Shaded ZonesHide Yellow LineHide Out & Back Route OpacityShow Intervals Overlay顯示區段疊圖Open Street Map - Custom Tile Server settingsOpenStreetMap - 地圖伺服器設定Tile server地圖伺服器Tile server URL地圖伺服器網址OpenStreetMap (default)OpenStreetMap (預設)Custom Tile Server A自定地圖伺服器ACustom Tile Server B自定地圖伺服器BCustom Tile Server C自定地圖伺服器CMap Grayscale FilterGoogle API keyGoogle API金鑰Interval區段Intervals區段Route路線No GPS Data Present沒有GPS資訊RideMetadataRaw DataBike騎車Problem Saving Meta Data儲存額外資料發生問題File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀RideNavigator*|Workout Code|Date|*|訓練課表代碼|日期File檔案Last updated最後更新Date日期Time時間Config Checksum設定檔校驗碼Remove Column刪除列Column Chooser列選擇器Do Not Show in Groups不依群組顯示Show In Groups依群組顯示RideWithGPSYou must authorise with RideWithGPS firstCompleted.完成。Network Error - Upload failed.網路異常 - 上傳失敗。RideWithGPSRideWithGPSUpload rides and analyse them using Google Maps.上傳騎車紀錄並使用Google Maps分析。RouteDropDialog"%1""%1"Season季度&All Selected選擇所有(&A)Just this &One僅此一項(&O)RouteOverviewItemRoute路線RoutesRoute #%1路線 #%1SRISRISRISwimming Relative Intensity, used for SwimScore calculation, defined as xPowerSwim/STP游泳相對強度,定義為xPowerSwim/STP,用以計算SwimScoreSTPSTPSTPwattswSwimming Threshold Power based on Swimming Critical Velocity, used for SwimScore calculation利用游泳臨界速度計算之游泳臨界功率用以計算SwimScoreSWolfSWolfSWolfStrokes per length, counting the arm using the watch plus time in seconds, Pool Length defaults to 50m for open water swims每段標準距離之划水次數,僅計算使用手錶之手臂,在開放水域時泳池長度預設為50公尺SaveOnExitDialogWidgetSave Changes儲存變更WARNING
You have made changes to some rides which
have not been saved. They are listed below.警告
有修改過的活動紀錄尚未儲存,列表如下。&Save and Exit儲存後離開(&S)&Discard and Exit放棄修改並離開(&D)&Cancel Exit取消(&C)Always check for unsaved changes on exit總是在離開前檢查是否要儲存修改SaveSingleDialogWidgetWARNING
You have made changes to 警告
以下項目已修改:Save and Conversion儲存並轉換 If you want to save
them, we need to convert to GoldenCheetah's
native format. Should we do so?
若您要繼續儲存
必須先轉換成GoldenCheetah
檔案格式,要繼續嗎?&Save and Convert儲存並轉換(&S)&Discard Changes放棄修改(&D)&Cancel Save取消(&C)Always warn me about file conversions總是彈出檔案轉換警告ScatterPlotPower (watts)輸出功率 (w)Cadence (rpm)迴轉數 (rpm)Heartrate (bpm)心率 (bpm)Speed (kph)速度 (kph)Speed (mph)速度 (mph)Altitude (meters)標高 (m)Altitude (feet)標高 (ft)Torque (N)扭距 (N)Elapsed Time (secs)累計經過時間 (s)Elapsed Distance (km)累計距離 (km)Elapsed Distance (mi)累計距離 (mi)Interval Number區段數Latitude (degree offset)緯度(位移)Longitude (degree offset)經度(位移)Circumferential Pedal Velocity (m/s)圓週踏板速率 (m/s)Average Effective Pedal Force (N)平均有效踏板施力 (N)Time at X/Y (%)時間為X/Y (%)Power Zone功率區間Headwind (kph)逆風 (kph)Slope (gradient)坡度Temperature (C)溫度 (ºC):L/R Balance左/右平衡Torque Efficiency扭矩效率Pedal Smoothness踏板平滑度Running Vertical Oscillation跑步垂直振幅Running Ground Contact Time跑步觸地時間Running Cadence跑動步頻Gear Ratio齒輪比Muscle Oxygen肌肉組織氧含量Haemoglobin Mass血紅素總量Deoxygenated Haemoglobin不帶氧血紅素Oxygenated Haemoglobin帶氧血紅素Unknown未知Power輸出功率Cadence迴轉數Heartrate心率Speed速度Altitude標高Pedal Force踏板施力Time時間Distance距離Interval區段Latitude緯度Longitude經度Time at X/Y時間為X/YZone區間CPVCPVAEPFAEPFHeadwind逆風Slope坡度Temp溫度Balance平衡TETEPSPSRVRVGCTGCTRun Cad跑動步頻Gear檔位SmO2SmO2tHbtHbO2HbO2HbHHbHHbNone無ScatterWindowPower輸出功率Cadence迴轉數Heartrate心率Speed速度Altitude標高Torque扭矩AEPFAEPFCPVCPVTime時間Distance距離Headwind逆風Slope坡度Temperature溫度L/R Balance左/右平衡L/R Torque Effectiveness左/右扭矩效率L/R Pedal Smoothness左/右踏板平滑度Running Vertical Oscillation跑步垂直振幅Running Cadence跑動步頻Running GCT跑步GCTGear Ratio齒輪比Muscle Oxygen肌肉組織氧含量Haemoglobin Mass血紅素總量Deoxygenated Hb缺氧HbOxygenated Hb帶氧HbX-Axis:X軸:Y-Axis:Y軸:Frame intervals區段分列顯示All intervals/activities所有區間/活動紀錄First intervals/activities on X-axisX軸顯示首項區間/活動紀錄First intervals/activities on Y-axisY軸顯示首項區間/活動紀錄Compare mode比較模式No拒絕Auto自動Linear線性Trend line趨勢曲線Trend趨勢Ignore Zero忽略零值Smooth平滑度Show Grid顯示格點Frame Intervals區段分列顯示SchemePageAdd新增Delete刪除++--%%Short簡稱Long全名Percent of CPCP百分比Maximum of 10 zones reached.僅允許設定10個區間。New新建New (%1)新建 (%1)SearchBoxSearch...搜尋...Filter...過濾...Add to Named Filters增加至過濾器設定Manage Filters過濾器管理Column Chooser列選擇器 and 及Add new search增加新搜尋項目Name:名稱:SearchFilterFile檔案SeasonAABBCCDDEESeasonsAll Dates所有日期This Year本年This Month本月Last Month上月This Week本週Last Week上週Last 24 hours過去24小時Last 7 days過去7日Last 14 days過去14日Last 21 days過去28日Last 28 days過去28日Last 6 weeks過去6週Last 2 months過去2個月Last 3 months過去3個月Last 6 months過去6個月Last 12 months過去12個月SeasonsPageAdd新增Delete刪除Up上Down下ddd MMM d, yyyyyyyy年M月d日ddd++--Name名稱Type種類From從To至SelfloopsAccount is not configured,未設定帳號,Completed.完成。Network Error - Upload failed.網路異常 - 上傳失敗。SelfloopsSelfloopsUpload and track your training and progress.上傳紀錄並追縱你的訓練及進度。SessionRPESession RPE活動RPESession RPE is the product of RPE * minutes, where RPE is the rate of perceived exercion (10 point modified borg scale) and minutes is Time Moving if available or Duration otherwise.活動RPE為RPE乘分鐘數。RPE為體感強度(按Borg標準設定10為滿分),而分鐘數為移動時間,或當移動時間不適用時取持續時間。SetDataPresentCommandSet Data Present設定數值存在SetPointValueCommandSet Value設定數值SetXDataPointValueCommandSet XData point value設定XData數值SimBicyclePageMass of everything that isn't wheels, tires, skewers...Mass of front wheel excluding tires and skewers...Front Spoke CountMass of a single spoke and nipple, washers, etc.Mass of rotor including boltsMass of anything inside the tire: sealant, tube...Functional outer radius of wheel, used for computing wheel circumferenceInner radius of rim, for computing wheel inertiaMass of rear wheel excluding tires and skewers...Rear Spoke CountMass of skewer/axle/funbolts, etc...Mass of tire not including tube or sealantBicycle Mass Without WheelsFront Wheel MassFront Spoke & Nipple Mass - EachFront Rim MassFront Rotor MassFront Skewer MassFront Tire MassFront Tube or Sealant MassFront Rim Outer RadiusFront Rim Inner RadiusRear Wheel MassRear Spoke & Nipple Mass - EachRear Rim MassRear Rotor MassRear Skewer MassRear Tire MassRear Tube or Sealant MassRear Rim Outer RadiusRear Rim Inner RadiusMass of rear cassette, including lockringRear Cassette MassCoefficient of rolling resistanceTotal coefficient of rolling resistance for bicycleCoefficient of power train lossPower train loss between reported watts and wheel. For direct drive trainer like kickr there is no relevant loss and value shold be 1.0.Coefficient of dragCoefficient of drag of rider and bicycleFrontal AreaTemperature溫度ActualTrainerAltitudeTotal KEMass%1 gFrontWheel KEMassFrontWheel MassFrontWheel EquivMassFrontWheel I%1%1Rear Wheel KEMassRear Wheel EquivMassRear Wheel IThe values on this page inform the bicycle physics models for simulating speed in trainer mode. These values are used by smart trainers and also by the speed simulation enabled by the <i>Simulate Speed From Power</i> option in the <i>Training</i> > <i>Preferences</i> tab.Resistance and DragDerived StatisticsBike & WheelsEffective frontal area of rider and bicycleTemperature in kelvin, used with altitude to compute air densityActual altitude of indoor trainer, in metersSixCycleNetwork Problem authenticating with the Sixcycle serviceSixcycle登入出現網路異常invalid root path.無效根目錄路徑。root is not a directory.根路徑不是一個目錄。Problem with Sixcycle authentication.Sixcycle登入錯誤You must authenticate with Sixcycle first必須先授權SixcycleCompleted.完成。Network Error - Upload failed.網路異常 - 上傳失敗。SixcycleSixcycleSync with the innovative training site.與訓練網站同步。SmallPlotAltitude標高WattswBPMbpmTime (minutes)時間 (min)SnippetsSnippet export代碼匯出Dump metrics for the ride to Athlete_Home/Snippets將活動紀錄之計測量輸出至Athlete_Home/SnippetsSnippetsConfigDump metrics for the ride to Athlete_Home/Snippets將活動紀錄之計測量輸出至Athlete_Home/SnippetsSolveCPDialogCritical Power Solver臨界功率運算器Solver Constraints預測器限則Select/Deselect All選擇/解除選擇所有CPCPW'W'TauΤRRProgress過程Iteration運算次數tauτCurrent目前值Best最佳Solve運算Close關閉Clear清除Stop停止SpecialFieldsStart Date起始日期Start Time開始時間Identifier識別碼Workout Code訓練課表代碼Sport運動種類Objective目的Keywords關鍵字Recording Interval記錄間隔SubSportWorkout Title訓練課表名稱Weight體重RPE體感強度CommuteTrainerFeelEquipment裝備Device裝置Device Info裝置資訊Pool Length泳池長度VO2max detectedAerobic Training EffectAnaerobic Training EffectEPOCRecovery TimePerformance ConditionLTHR detectedLTS detectedInterval NotesInterval GoalSpike TimeSpikesFilename檔名Year年Change History修改記錄Source Filename來源檔案名稱Route路線Data日期File Format檔案格式Athlete運動員Month月Weekday週SpecialTabsWorkout訓練課表Notes筆記Metric計測量Extra額外資訊Raw DataDevice裝置Athlete運動員Interval區段SplashScreen%1 - build %2SplitActivityWizardSplit Activity分割活動紀錄Start開始Stop停止Duration持續時間Distance距離Interval Name區段名稱Filename檔案名Date日期Time時間Action動作Activity Segment #%1活動區段 #%1Gap in recording #%1記錄間距 #%1Entire Activity整個活動紀錄Gap in recording記錄間距dd MMM yyyyyyyy年M月d日Remove移除Create建立SplitConfirmConfirm確認Split activity cannot be undone分割活動紀錄無法復原%1 file(s) will be created.
Are you sure you wish to proceed?即將建立檔案%1
請問要繼續進行?Removed已移除Saved已儲存Completed完成Split Activity Completed分割活動紀錄完成SplitKeepKeep original保留原有記錄Do you want to keep the original?是否要保留原有記錄?If you want to keep the current activity then you should ensure you have clicked on the "Keep original " check box below.
If you do not choose to keep the original it will be backed up before removing it from the history.
如果想保留目前的活動紀錄,請勾選下面[保留原有記錄]方塊。
否則,將保留一備份檔,然後再從歷史紀錄中移除。
WARNING: The current activity will be backed up and removed, but a backup already exists. The existing backup will therefore be overwritten.警告:本活動紀錄將被備份及移除,前一次保存的備份檔將被覆蓋。SplitParametersSplit Parameters分割參數Configure how segments are found設定如何搜尋紀錄分段This wizard will find segments of the activity to save by looking for gaps in recording.
You can define the minimum length, in time, a gap in recording should be in order to mark the end of one segment and the beginning of another.
In addition, you can set a minimum segment size. Any segment smaller than this limit will be ignored.
本精靈將搜尋紀錄之空白段找出活動紀錄分段。
可定義前一分段的結束至後一分段的開始的紀錄間距的最小時間。
此外可設置最小分段長度,任何短於此長度的分段將被忽略。Minimum Gap (minutes)最短間距(min)Minimum Segment Size (minutes)最短紀錄分段大小(min)SplitSelectSelect Split Markers選擇分割標記Activity will be split between marker points selected將以選定標記點將活動紀錄分割SplitWelcomeSplit Activity分割活動紀錄Lets get started開始!This wizard will help you split the current activity into multiple activities
The wizard will identify segments of uninterrupted activity and allow you to select which ones to save as new activities. You will also be able to select any currently defined intervals too.
If the newly created activity clashes with an existing activity (same date and time) then the wizard will adjust the start time by one or more seconds to avoid losing or overwriting any existing data.本精靈幫助你把目前活動紀錄分割為多個
本精靈可辨識連續活動紀錄中的各分段,讓你選擇其中某些保存為新活動紀錄。你也能夠選擇任何已定義的區段。
若新創建的活動紀錄與已有活動紀錄衝突(起始日期和時間相同),本精靈將稍微調整起始時間以避免丟失或覆蓋已有數據。SportTracksJSON parser errorJSON解譯失敗You must authorise with SportTracks first必須先授權SportTracksCompleted.完成。Network Error - Upload failed.網路異常 - 上傳失敗。SportTracks.mobiSportTracks.mobiSync with the popular multisport website.與多項運動網站同步。SportsPlusHealthCompleted.完成。Upload failed. (%1)上傳失敗 (%1)SportPlusHealthSportPlusHealthUpload to the cycling and running site.上傳至此騎車及跑步網站。SrmDeviceFailed to create temporary file 無法創建暫存檔 failed to allocate device handle: %1無法指派裝置處理端子:%1device type %1 is unsupported未支援裝置%1opening PCV at %1正在打開%1的PCVopening PC6/7 at %1正在打開%1的PC6/PC7unsupported SRM Protocol version: %1未支持SRM協定版本:%1failed to allocate Powercontrol handle: %1無法指派Powercontrol處理端子:%1Couldn't open device %1: %2無法打開裝置%1:%2Couldn't set logging function: %1無法設定日誌功能:%1failed to set Powercontrol io handle: %1無法設定Powercontrol io處理端子:%1failed to initialize Powercontrol communication: %1無法初始化Powercontrol通訊:%1failed to start download: %1無法開始下載:%1failed to get number of data blocks: %1無法取得數據塊數量:%1found %1 ride blocks找到%1個騎乘數據塊preview failed: %1預覽失敗:%1failed to allocate data handle: %1無法指派數據處理端子:%1download cancelled下載已取消skipping unselected ride block %1跳過未選擇之騎乘塊%1progress: %1/%2進度:%1/%2adding chunk failed: %1新增數據塊失敗:%1adding marker failed: %1新增標記失敗:%1download failed: %1下載失敗: %1got %1 records取得%1筆資料no data available沒有任何資料Couldn't split data: %1無法分割數據:%1Couldn't fixup data: %1無法修正數值:%1Couldn't get start time of data: %1無法取得數據起始時間:%1failed to open file %1: %2無法打開檔案 %1:%2Couldn't write to file %1: %2無法寫入至檔案%1:%2cleaning device ...清除裝置中...failed to clear Powercontrol memory: %1無法清空Powercontrol記憶體:%1StravaNo authorisation token configured.未設定授權憑證。JSON parser errorJSON解譯失敗You must authorise with Strava first必須先授權StravaNetwork Problem reading Strava data無法讀取Strava資料invalid response or parser exception.無效的回應或解譯錯誤Completed.完成。StravaStravaSync with the social network for cyclists and runners.與騎士跑者之社交網路同步。StravaRoutesDownloadDownload Routes as workouts from Stravacheck/uncheck all選擇/解除選擇所有Refresh List刷新列表Name名稱Description説明Action動作Overwrite existing workouts覆寫現有訓練課表Close關閉Download下載Download...下載...Abort停止%1 workouts downloaded, %2 failed or skipped.已下載%1項訓練課表,%2項下載失敗或已略過。Today's Plan Workout Download從Today's Plan下載訓練課表The following error occured: %1出現錯誤: %1Downloading...下載中...Error downloading下載錯誤Exists already已存在Removing...移除中...Saved已儲存Write failed寫入失敗Invalid File無效的檔案You must authorise with Strava first必須先授權StravaUnable to determine authenticated user idNetwork Problem reading Strava data無法讀取Strava資料StrokeRateStroke Rate動作頻率strokes/minstrokes/minStroke Rate in strokes/min, counting both arms for freestyle/backstroke, corrected by 3m push-off length for pool swims每分鐘划水次數,在自由泳和背泳計算每一臂之動作,在游泳池時扣除換池3公尺推進。StrokesPerLengthStrokes Per Length每距離動作次數strokesstrokesStrokes per length, counting the arm using the watch, Pool Length defaults to 50m for open water swims每段標準距離之划水次數,僅計算使用手錶之手臂,在開放水域時泳池長度預設為50公尺SwimPaceSwim Pace游泳段速min/100mmin/100mmin/100ydmin/100ydAverage Swim Pace, computed only when Cadence > 0 to avoid kick/drill lengths平均游泳段速,於迴轉速大於0時計算,避免算入潛水及踢水之區段SwimPaceBackSwim Pace Back背泳段速Average Swim Pace for backstroke lengths背泳之平均段速SwimPaceBreastSwim Pace Breast蝶泳段速Average Swim Pace for breaststroke lengths蝶泳之平均段速SwimPaceFlySwim Pace Fly自由泳段速Average Swim Pace for butterfly lengthsAverage Swim Pace for freestyle lengths自由泳之平均段速SwimPaceFreeSwim Pace Free自由泳段速Average Swim Pace for freestyle lengths自由泳之平均段速SwimPaceStrokeSwim Pace游泳段速min/100mmin/100mmin/100ydmin/100ydAverage Swim Pace, computed only when Cadence > 0 to avoid kick/drill lengths平均游泳段速,於迴轉速大於0時計算,避免算入潛水及踢水之區段SwimScoreSwimScore swimming stress metric as defined by Dr. Skiba由Dr.Skiba定義之SwimScore游泳壓力指數SwimStrokerestfreebackbreastflydrillmixednaSwim StrokeStrokeSwim Stroke: 0 - rest, 1 - free, 2 - back, 3 - breast, 4 - fly, 5 - drill, 6 - mixedTPaceTPaceTPacemin/kmmin/kmmin/milemin/miDaniels' TPace, computed as 90%vVDOT from VDOT metric, in min/km or min/mileDaniels TPace算法為90%vVDOT,單位min/km或min/miTRIMP100PointsTRIMP(100) PointsTRIMP(100) 指數TRIMP Points normalized to assign 100 points to 1 hour at threshold heart rate.標準化之TRIMP指數,即當在心率閥值持續1小時為100點。TRIMPPointsTRIMP PointsTRIMP指數Training Impulse according to Morton/Banister with Green et al coefficient.Morton/Banister提出,使用Green et al 系數計算之訓練量估算指數。TRIMPZonalPointsTRIMP Zonal PointsTRIMP區間指數Training Impulse with time in zones weighted according to coefficients defined in Heart Rate Zones.以心率區間定義之各區時間加權訓練量指數。TSSPerHourBikeStress per hour每小時之BikeStressTraining Stress Score divided by Duration in hoursTSS除以持續時間小時數TagBarAdd Tag...Create new tagThe tag "<b>%1</b>" does not exist yet.<br>Should it really be created?TcxFileReaderBike騎車Run跑步ThemesModern DarkModern LightModern Stealth DarkModern Stealth LightGnome Adwaita DarkTeam Colours (light)Ollie's Oatmeal (light)Mustang (dark)Mono (dark)暗單色主題Mono (light)亮單色主題Schoberer (light)TimeCarryingTime Carrying (Est)牽車時間(估計)secondssTime with low speed and elevation gain but no power nor cadence低速有爬升且無功率及迴轉數之時間TimeRecordingTime Recording紀錄時間secondssTime when device was recording, excludes gaps in recording due to pauses or missing samples裝置紀錄時間,不計算暫停或無記錄點之時間空白段TimeRidingTime Moving移動時間secondssTime with speed or cadence different from zero速度或迴轉數非零之時間ToExhaustionTo Exhaustion力竭次數Count of exhaustion points marked by the user in an activity由用者在活動紀錄標記之力竭點數量ToolsRhoEstimatorAir Density (Rho) Estimator空氣密度(Rho)預估器Enter measured values for the following:輸入以下測量值:Metric公制Imperial英制Temperature (C):溫度 (ºC):Temperature (F):溫度 (ºF):Air Pressure (hPa):氣壓 (hPa):Air Pressure (inHg):氣壓 (inHg):Dewpoint (C):霜點 (ºC):Dewpoint (F):霜點 (ºF):Relative Humidity (%):Use Relative HumidityEstimated air density (rho):預估大氣密度 (rho):(kg/m^3)(kg/m^3)(lb/ft^3)(lb/ft^3)Done結束TotalCaloriesCalories (HR)總卡路里(心率)kcalkcalTotal Calories estimated from Time Moving, Heart Rate, Weight, Sex and Age從移動時間,心率,體重,性別及年齡預估之總消耗卡路里熱量TotalDistanceDistance距離kmkmmilesmiTotal Distance in km or miles以公尺或英哩計算之總距離TotalWorkWork作功kJkJTotal Work in kJ computed from power data從功率數據計算之總作功焦耳量TrainBottomResumePauseStart開始ConnectDisconnectAdjust intensityRewindStopFast forwardBack 1 lapLapForward 1 lapCalibrateDecrease intensityIncrease intensityTrainConfigTrain Devices訓練裝置Preferences喜好設定Remote Controls遙控Virtual Bicycle SpecificationsWorkout TagsTrainDBCannot open database無法開啟資料庫Unable to establish a database connection.
This feature requires SQLite support. Please read the Qt SQL driver documentation for information how to build it.
Click Cancel to exit.無法建立資料庫連線。
此功能需要安裝SQLite,請詳閱Qt SQL driver documentation以取得相關資訊。
按取消離開此畫面。Manual Erg Mode手動ERG模式Manual Slope Mode手動坡度模式None無TrainOptionsPageWorkout and VideoSync Library訓練課表及影片同步檔資料庫Browse瀏覽Simulate Speed From PowerSimulation physics uses current athlete parameters and settings
from the virtual bicycle specifications tab. For Erg Mode workouts
the slope is assumed to be zero.Simulate Relative HypoxiaPower used by simulation is adjusted for hypoxia relative to
ActualTrainingAltitude value in virtual bicycle specifications
tab.Auto-connect devices in Train View在訓練頁面自動連線到裝置Allow multiple devices in Train View允許在訓練頁面有多組裝置Auto-hide bottom bar in Train View在訓練頁面自動隱藏底層欄Play sound before new lap新計圈前播放聲音Coalesce contiguous sections of same wattageEnable TooltipsTelemetry font scalingFit to height onlyFit to height and widthStart Countdown secsCountdown for workout startTrainSidebarSave workout data儲存訓練課表數據Devices裝置Menu選單Workouts訓練課表Filter...過濾...Workout InfoMedia多媒體VideoSync影片同步檔Import Workout from File匯入訓練課程Get Workouts from TrainerDay從TrainerDay下載訓練課表Create Workout via Wizard新增訓練課表精靈Scan for Workouts搜尋訓練課表Delete selected Workout刪除選中的課表Delete %1 selected Workouts刪除選中的%1課表Train mode active訓練模式啓用中Please stop the train mode before closing the window or application.請於關閉程式前,先停止訓練模式。Remove reference to selected video移除與影片之關聯Import VideoSync from File從檔案匯入影片同步檔Scan for VideoSyncs掃瞄影片同步檔Delete selected VideoSync刪除選中的影片同步檔Are you sure you want to remove the reference to this video?是否真的刪除此影片之關聯?Remove移除Are you sure you want to delete this VideoSync?是否真的刪除此影片同步檔?The VideoSync file is either not valid or not existing and will be removed from the library.此影片關聯檔不可用或不存在,將從資料庫移除。Are you sure you want to delete this Workout?是否真的刪除此訓練課表?Are you sure you want to delete this %1 workouts?是否真的刪除訓練課表%1?The Workout file is either not valid or not existing and will be removed from the library.此訓練課表檔不可用或不存在,將從資料庫移除。Starting in %1Recalibrating steering..重新較正移軸..Requesting calibration..請求進行校正..Calibrating...校正中...Calibrating...
Current speed %1 kph
Increase speed to %2 kph校正中...
目前速度%1kph
請加速至%2kphCalibrating...
Stop pedalling until speed drops to 0校正中...
停止踩踏直至速度歸零Calibration completed successfully!
Spindown %1 ms
Zero Offset %2校正成功!
轉停時間%1ms
零值偏移%2Calibration failed!校正失敗!Calibration Failed: Loosen RollerCalibration Failed: Tighten RollerUnclip or stop pedalling to begin calibration..脫卡扣或停止踩踏,以開始進行校正..Calibrating...
Unclip or stop pedalling until process is completed..
Torque %1校正中...
解卡扣或停止踩踏,直至校正程序完成..
扭矩值%1Calibration completed successfully!
Zero Offset %1
Torque %2校正成功!
零值偏移%1
扭矩%2Calibrating...
Unclip or stop pedalling until process is completed..
Zero Offset %1校正中...
解卡扣或停止踩踏,直至校正程序完成..
零值偏移%1Calibration completed successfully!
Zero Offset %1
Slope %2校正成功!
零值偏移%1
斜率%2Give the pedal a kick to start calibration...
The motor will run until calibration is complete.Allow wheel speed to settle, DO NOT PEDAL...
The motor will run until calibration is complete.Calibrating... DO NOT PEDAL, remain seated...
Gathering enough samples to calculate average: %1Calibrating... DO NOT PEDAL, remain seated...
Waiting for value to stabilize (max %1s): %2 (%3W @ %4kph)Calibration completed successfully!
Final calibration value %1 (%2W @ %3kph)Calibration failed! Do not pedal while calibration is taking place.
Allow wheel to run freely.Fast forward..快進..Rewind..後退..Next Lap..Back Lap..Increasing intensity..強度增加中..Decreasing intensity..強度降低中..Import Video from File從檔案匯入影片Get Workouts from Strava RoutesScan for Videos掃描影片Delete刪除Resuming..回復中..Paused..暫停..Starting..啓動中..Stopped..已停止..Connected..已連線..Disconnected..已斷線..New lap..進入下一圈..No Devices Configured未設定裝置Please configure a device in Preferences.請先設定裝置。Exiting calibration..離開校正..Calibration not supported for this device.此裝置未支援校正功能。Calibrating...
Press F3 on Controller when done.校正中...
完成後按控制器之F3鍵。Add Device新增裝置Delete Device刪除裝置Are you sure you want to delete this device?是否真的刪除此裝置?TrainViewIntensity Adjustments and Workout Control強度調整及訓練課表控制TrainerDayAPIDialogQuery TrainerDay...Search搜尋Select all選擇所有Allow overwriting of existing workoutsImport selectedDownload workouts from <a href='https://trainerday.com'>TrainerDay</a>TrainerDay workout querying is disabled in this build.Page %1Syntax error in query '%1'Import selected (%1/%2)successfully importedalready importedimport failedavailable in filesystem but not importedTrainerDayDownloadDialogDownload workouts from TrainerDay從TrainerDay下載訓練課表Name名稱Type種類Author作者Dated日期Action動作Close關閉Query workoutsClassic downloaddd MMM yyyyyyyy年M月d日Download下載check/uncheck all選擇/解除選擇所有Overwrite existing workouts覆寫現有訓練課表Cancel取消Download...下載...Abort停止%1 workouts downloaded, %2 failed or skipped.已下載%1項訓練課表,%2項下載失敗或已略過。Finish完成Downloading...下載中...Exists already已存在Removing...移除中...Saved已儲存Write failed寫入失敗Invalid File無效的檔案TrainingsTageBuchfailed to parse Settings response: 無法解譯設定檔回應: failed to get settings: 無法獲得設定: failed to parse Session response: 無法解譯連接回應: failed to get new session: 無法獲得新連接: got empty session取得空白連接Completed.完成。Error - Upload failed.網路異常 - 上傳失敗。TrainingstagebuchTrainingstagebuchUpload to your online and mobile training log.上傳紀錄至行動及網路訓練日誌。TreeMapPlot(unknown)(未知)TreeMapWindowFirst最前SecondsMetric公制Date range日期範圍(unknown)(未知)%1 activities%1次活動紀錄None無TrendsViewCompare Date Ranges日期範圍比較TriScoreTriScore combined stress metric based on Dr. Skiba stress metrics, defined as BikeScore for cycling, GOVSS for running and SwimScore for swimming. On zero fallback to TRIMP Zonal Points for HR based score.Skiba教授提出,TriScore綜合指數即以BikeScore計算騎車壓力,GOVSS計算跑步壓力,SwimScore計算游泳壓力。若為零值則採用TRIMP區段指數以心率計算。UniqueLabelEditDelegateThe given value "%1" is not uniqueUserChartOverviewItemName名稱UserChartSettingsChartSub-titleDescription説明Line ChartScatter ChartBar ChartStacked Bar ChartStacked Percent ChartPie ChartType種類VerticalHorizontalLayoutNone無TopLeftRightBottomLegend圖例Font scalingBackgroundAnimateSingle series per plotRefresh for intervalsSeries序列Name名稱GroupY FormulaEdit編輯Up上Down下AxesUserMetricParserProblem Saving User Metric Configuration無法儲存使用者計測量設定File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀VAMVAMVAMVelocita Ascensionale Media, average ascent speed in vertical meters per hourVelocita Ascensionale Media即每小時爬升公尺數VDOTVDOTVDOTml/min/kgml/min/kgDaniels' VDOT computed from best average pace for durations from 4 min 4 hrDaniels' VDOT以持續時間4min至4hr之最佳平均段速計算VDOTCalculatorVDOT and T-Pace CalculatorVDOT及T-Pace計算機 km km mi mi hours hr mins min secs sYour Test Race:你的測試紀錄:Your Daniels VDOT:你的Daniels VDOT:Your Training Paces:你的訓練段速:E-PaceE-PaceM-PaceM-PaceT-PaceT-PaceI-PaceI-PaceR-PaceR-Pace20020040040010001000milemiYour Target Race:你的目標賽事:Equivalent Time:等同時間:Calculate計算Done結束VIVariability Index is the ratio between IsoPower and Average Power.變化指數為IsoPower及平均功率之比率VMProConfiguratorUnknown Response: %1Device State: %1User Piece Size: %1Calibration Progress: %1 %Volume Correction Mode: %1O2 Cell Age: %1Idle Timeout Mode: %1Auto-calibration Mode: %1Breath State: %1VMProErrorToStringHelperNo Error.Initialization error, shutting off.Too hot, shutting off.Too cold, shutting off.Sat idle too long, shutting off.Battery is out of charge, shutting off.Failed to initialize environmental sensor.
Send unit in for service.Failed to initialize oxygen sensor.
Send unit in for service.Failed to initialize flow sensor.
Send unit in for service.Failed to initialize sensor communication.
Send unit in for service.Failed to write a page to flash memory.
Send unit in for service.Failed to erase a page from flash memory.
Send unit in for service.No warning.Mask leak detected.User piece too small.User piece too big.Device very hot.Device very cold.Breathing less than valve trigger.Oxygen sensor too humid.Oxygen sensor dried.Breathing during ambient calibration.
Hold your breath for 5 seconds.Many breaths rejected.Low battery.Thermal change occurring.Thermal change slowed.Ventilation out of range.No calibration message.O2 sensor signal drifted.Ambient pressure changed a lot.Temperature changed a lot.Maximum time between calibrations reached.5 minute recalibration.Post-thermal shock calibration.Calibration: waiting for user to start breathing.Breath rejected; too jittery.Breath rejected; segment too short.Breath rejected; breath too short.Breath rejected; breath too small.Breath rejected; Rf out of range.Breath rejected; Tv out of range.Breath rejected; Ve out of range.Breath rejected; FeO2 out of range.Breath rejected; VO2 out of range.Device initialized.Device attempted to enter Record mode
before completing calibration.Oxygen sensor calibration waveform is volatile.Oxygen sensor reading clipped at its maximum value.Valve opened.Valve closed.Calib diff: minimum.Calib diff: small.Calib diff: medium.Calib diff: large.Error Code: %1VMProWidgetThe size engraved on the user pieces. This is the skrew-in part that attaches to the mask.RestingMedium中LargeUser Piece SizeThis is an advanced setting. If you don't know what it is, it's recommended that you leave it on STPD.Volume Correction ModeIf enabled, the device will automatically start a recalibration 5 minutes into the session. If disabled you can still trigger a manual calibration.EnabledDisabledAuto RecalibrationIf enabled, the device will shut off after 15 minutes of no breathing.Idle TimeoutCalibration Status:Unknown未知Calibration StatusStart CalibrationStatus InformationSave log to fileSave FileVariabilityIndexSkiba VISkiba VISkiba Variability Index is the ratio between xPower and Average Power.Skiba變化指數為xPower及平均功率之比率VeloheroFailed to parse sessionID response.無法解譯連接ID回應。failed to get new session: 無法獲得新連接: got empty session取得空白連接Completed.完成。Network Error - Upload failed.網路異常 - 上傳失敗。VeloheroVeloheroUpload your rides to the independent and free cycling training log上傳騎車紀錄到獨立的免費騎車訓練日誌網站VideoWindow kph kphMeters layoutReset Meters layout to default mph m m feetw%% km mi miCalibration required需要校正Configuration required需要設定brake fault煞車異常Ready準備完成ViewSplitterClear清除OFF關ON開Vo2maxEstimated VO2MAXVO2max預估ml/min/kgml/min/kgEstimated VO2max from 5 min Peak Power relative to Athlete Weight using new ACSM formula: 10.8 * Watts / KG + 7 (3.5 per leg).利用ACSM公式10.8 * 5min最大功率 / KG + 7 (3.5 每腿)計算,相對運動員體重之估計VO2MaxWCPZoneTimesecondssWCPZoneTime1W1 Above CP W'bal Low FatigueW1 CP以上 W'Bal 低疲勞作功secondssTime expended when Power is above CP and W' bal is below 25% of W'.W'Bal低於W'的25%,同時功率大於CP之時間WCPZoneTime2W2 Above CP W'bal Moderate FatigueW2 CP以上 W'Bal 中度疲勞作功secondssTime expended when Power is above CP and W' bal is between 25% and 50% of W'.W'Bal介於W'的25%-50%,同時功率大於CP之時間WCPZoneTime3W3 Above CP W'bal Heavy FatigueW3 CP以上 W'Bal 重度疲勞作功secondssTime expended when Power is above CP and W' bal is between 50% and 75% of W'.W'Bal介於W'的50%-75%,同時功率大於CP之時間WCPZoneTime4W4 Above CP W'bal Severe FatigueW4 CP以上 W'Bal 極端疲勞作功secondssTime expended when Power is above CP and W' bal is above 75% of W'.W'Bal高於W'的75%,同時功率大於CP之作功量WPrimeW' (Joules): %1W' (J): %1<td align="center">Zone</td><td align="center">區間</td><td align="center">Description</td><td align="center">説明</td><td align="center">High (J)</td><td align="center">最高 (J)</td><td align="center">Low (J)</td><td align="center">最低 (J)</td><td align="center">Work (kJ)</td><td align="center">作功 (kJ)</td><td align="center">Time</td><td align="center">時間</td><td align="center">%</td><td align="center">%</td><td align="center">Above CP Time</td><td align="center">輸出大於 CP 時間</td>WPrimeExpW' WorkW' 作功kJkJW' Work is the amount of kJ produced while power is above CP.W'作功即功率輸出大於CP之作功kJ總量WPrimeTauW'bal TAUW'Bal τW' bal TAU is the recovery time constant for W' bal, W' bal tracks the level of W' according to CP model during intermitent exercise.W'Bal τ為W'Bal 之恢復時間常數,W'Bal按CP模型追縱在間歇訓練時W'之剩餘狀況。WPrimeWattsW' PowerW' 功率wattswW' Power is the average power produce while power is above CP.W'功率為功率輸出大於CP時之平均功率WSModelWard-SmithWard-SmithWZoneTimesecondssWZoneTime1W1 W'bal Low FatigueW1 W'Bal 低疲勞secondssTime expended when W' bal is below 25% of W'.W'Bal低於W'的25%之時間WZoneTime2W2 W'bal Moderate FatigueW2 W'Bal 中度疲勞secondssTime expended when W' bal is between 25% and 50% of W'.W'Bal介於W'的25%-50%之時間WZoneTime3W3 W'bal Heavy FatigueW3 W'Bal 重度疲勞secondssTime expended when W' bal is between 50% and 75% of W'.W'Bal介於W'的50%-75%之時間WZoneTime4W4 W'bal Severe FatigueW4 W'Bal 極端疲勞secondssTime expended when W' bal is above 75% of W'.W'Bal高於W'的75%之時間WZoneWorkkJkJWZoneWork1W1 W'bal Work Low FatigueW1 W'Bal 低疲勞作功kJkJWork produced when W' bal is below 25% of W'.W'Bal低於W'的25%之作功量WZoneWork2W2 W'bal Work Moderate FatigueW2 W'Bal 中度疲勞作功kJkJWork produced when W' bal is between 25% and 50% of W'.W'Bal介於W'的25%-50%之作功量WZoneWork3W3 W'bal Work Heavy FatigueW3 W'Bal 重度疲勞作功kJkJWork produced when W' bal is between 50% and 75% of W'.W'Bal介於W'的50%-75%之作功量WZoneWork4W4 W'bal Work Severe FatigueW4 W'Bal 極端疲勞作功kJkJWork produced when Power is above CP and W' bal is above 75% of W'.W'Bal高於W'的75%之作功量WattsRPEWatts:RPE Ratio功率瓦數RPE比Watts to RPE ratio功率瓦數與RPE之比例WebPageWindowURL網址Hit return to apply URLWheelSizeCalculatorWheel Size CalculatorRim SizeTire SizeWheel Size輪徑mmmmWithingsWithingsWithingsDownload weight, body fat etc from the connected health specialists.從裝置下載體重或體脂等測量資料。WithingsDownloadGolden Cheetah->PreferencesGolden Cheetah->設定Tools->Options工具->選項Error fetching OAuth credentials. Please make sure to complete the Withings authorization procedure found under %1.OAuth驗證提取失敗,請重新按%1執行Withings授權。OAuth ErrorOAuth錯誤Error parsing Withings API response. Please check the error description.Withings API回應無法解譯。詳請參照錯誤描述。Error錯誤There was an error during fetching. Please check the error description.存取時發生錯誤。詳請參照錯誤描述。WorkbeatsWorkbeat stressWorkbeat壓力Work * Heartbeats / 100000作功乘心率除100000WorkoutEditorBaseDelete刪除Delete the highlighted row刪除標示行Add新增Add row at end於末端插入新行Insert插入Add a Lap below the highlighted row於標示行下插入新圈Lap圈WorkoutFilterBoxFilter...過濾...ERROR: %1WorkoutImportDialogImport to Library匯入至資料庫Please note, that when importing or drag and dropping videos into the library we DO NOT copy the file into the GoldenCheetah library, instead we add a REFERENCE to it. We DO copy workout and videoSync files, since they are smaller.
You can remove references when managing the library via the context menu options請注意,將影片匯入或拖入到訓練課表庫中時,將僅引用而不會複製檔案至檔案夾。訓練課表和影片同步檔因為比較小,會複製檔案至檔案夾。
在管理訓練課表庫時,可通過菜單選項移除此引用Files檔案Cancel取消OKOKOverwite existing files覆寫現有檔案WorkoutMenuProviderSelect TagsManage Filters過濾器管理Add FilterAdd Tag to FilterFilter Tags...Match all selected tagsManage Workout FiltersName名稱Filter過濾器_indexExecuteUpdate更新Add Workout FilterName of the Filter...New新建New (%1)新建 (%1)WorkoutMetricsSummaryWorkout Metrics訓練課表計測量WorkoutPlotWindowErgmode specific settingsColor power zonesNeverAlwaysWhen stoppedShow tooltipWorkoutTagManagerPageTagAssigned to # workouts++--Delete刪除WorkoutTimeDuration持續時間secondssTotal Duration including pauses a.k.a. Elapsed Time包含暫停之總持續時間,亦即經過時間WorkoutTypePageWorkout Creator訓練課表建立器Select the workout type to be created選擇要新增的訓練課表類型Absolute Wattage絕對功率值Relative WattageGradient坡度Import Selected Activity (匯入選中活動紀錄 (No activity selected未選擇活動紀錄WorkoutWidgetFile save failed.存檔失敗。Intensity強度WorkoutWindowShow HeartrateSeconds to averageShow PowerShow CadenceShow VO2Show VentilationShow SpeedShow WBalERG - Absolute WattsMRC - Relative WattsNew新建Save儲存Save As另存新檔Undo復原Redo重做Draw描畫Select選擇Cut剪下Copy複製Paste貼上Properties喜好設定Zoom In放大Zoom Out縮小Coalesced sections of same wattageYou have unsaved changes to a workout.訓練紀錄尚未存檔。Do you want to save them?要儲存這些資料嗎?Save Workout File儲存訓練課表檔案WorkoutWizardWorkout Wizard訓練課表精靈XDataDialogxDataXDataData Series資料序列Add新增Delete刪除XDataEditorCut剪下Copy複製Paste貼上Delete Row刪除行Append Row添加行Insert Row插入行Remove Column刪除列Add Column新增列Paste error貼上錯誤Please select target cell or cells to paste values into.請選擇要貼上的目標欄位。Copy buffer and selected area are diffferent sizes.剪貼簿內容與選定區域之大小不同。Copy buffer has more columns than available.剪貼簿內容有更多列。Copy buffer has more rows than available.剪貼簿內容有更多行。XDataSeriesSettingsDialogName名稱Units單位Cancel取消OKOKError錯誤Name is blank未輸入名稱XDataSettingsDialogxDataXDataData Series資料序列Units單位Series %1序列 %1Cancel取消OKOKError錯誤XData name is blank未輸入XData名稱Must have at least one data series.必須定義至少一個資料序列。XDataTableModelTime時間Distance距離XPacexPacexPacemin/kmmin/kmmin/milemin/miIso pace in min/km or min/mile, defined as the constant pace in flat surface which requires the same LNP以min/km或min/mi為單位之Iso pace,即相同LNP下在平路上之穩定段速。XPaceSwimxPace Swim游泳xPacemin/100mmin/100mmin/100ydmin/100ydIso Swim Pace in min/100m or min/100yd, defined as the constant pace which requires the same xPowerSwim以min/100m或min/100yd為單位之游泳Iso pace,即相同xPowerSwim下之穩定游泳段速。XPowerxPowerxPowerwattswxPower is an estimate of the power that you could have maintained for the same physiological 'cost' if your power output had been perfectly constant, similar to IsoPower.xPower和IsoPower很接近,是假設功率輸出在完美穩定狀態下,相同身心耗費可維持之功率輸出量。XPowerSwimxPower Swim游泳xPowerwattswSwimming power normalized for variations in speed as defined by Dr. Skiba in the SwimScore algorithm按Dr.Skiba之SwimScore公式計算,標準化穩定游泳速度之游泳功率XertJSON parser errorJSON解譯失敗You must authorise with Xert first必須先授權XertCompleted.完成。Network Error - Upload failed.網路異常 - 上傳失敗。XertXertSync with the innovative site for fitness monitoring, tracking, and planning.與體態監測,追縱及規劃網站同步ZoneOverviewItemTime In Zone區間時間Power Zones功率區間ZonePTime1L1 Percent in ZoneL1百分比Percent of Time in Power Zone 1.功率區間1所佔時間百分比。ZonePTime10L10 Percent in ZoneL10百分比Percent of Time in Power Zone 10.功率區間10所佔時間百分比。ZonePTime2L2 Percent in ZoneL2百分比Percent of Time in Power Zone 2.功率區間2所佔時間百分比。ZonePTime3L3 Percent in ZoneL3百分比Percent of Time in Power Zone 3.功率區間3所佔時間百分比。ZonePTime4L4 Percent in ZoneL4百分比Percent of Time in Power Zone 4.功率區間4所佔時間百分比。ZonePTime5L5 Percent in ZoneL5百分比Percent of Time in Power Zone 5.功率區間5所佔時間百分比。ZonePTime6L6 Percent in ZoneL6百分比Percent of Time in Power Zone 6.功率區間6所佔時間百分比。ZonePTime7L7 Percent in ZoneL7百分比Percent of Time in Power Zone 7.功率區間7所佔時間百分比。ZonePTime8L8 Percent in ZoneL8百分比Percent of Time in Power Zone 8.功率區間8所佔時間百分比。ZonePTime9L9 Percent in ZoneL9百分比Percent of Time in Power Zone 9.功率區間9所佔時間百分比。ZonePTimeILI Percent in ZonePercent of Time in Power Zone I - Below AeTZonePTimeIILII Percent in ZonePercent of Time in Power Zone II - Between AeT and CPZonePTimeIIILIII Percent in ZonePercent of Time in Power Zone III - Above CPZonePageSport運動種類Critical Power臨界功率Default預設ZoneTimeseconds秒ZoneTime1L1 Time in ZoneL1時間secondssTime in Power Zone 1.功率區間1內所佔的時間ZoneTime10L10 Time in ZoneL10時間secondssTime in Power Zone 10.功率區間10內所佔的時間ZoneTime2L2 Time in ZoneL2時間secondssTime in Power Zone 2.功率區間2內所佔的時間ZoneTime3L3 Time in ZoneL3時間secondssTime in Power Zone 3.功率區間3內所佔的時間ZoneTime4secondssL4 Time in ZoneL4時間Time in Power Zone 4.功率區間4內所佔的時間ZoneTime5L5 Time in ZoneL5時間secondssTime in Power Zone 5.功率區間5內所佔的時間ZoneTime6L6 Time in ZoneL6時間secondssTime in Power Zone 6.功率區間6內所佔的時間ZoneTime7L7 Time in ZoneL7時間secondssTime in Power Zone 7.功率區間7內所佔的時間ZoneTime8L8 Time in ZoneL8時間secondssTime in Power Zone 8.功率區間8內所佔的時間ZoneTime9L9 Time in ZoneL9時間secondssTime in Power Zone 9.功率區間9內所佔的時間ZoneTimeIsecondsLI Time in ZoneTime in Power Zone I - Below AeTZoneTimeIIsecondsLII Time in ZoneTime in Power Zone II - Between AeT and CPZoneTimeIIIsecondsLIII Time in ZoneTime in Power Zone III - Above CPZonesActive Recovery動態恢復Endurance耐力區間TempoTempo區間Threshold閾値區間VO2MaxVO2Max區間Anaerobic無氧區間Neuromuscular神經肌肉區間Zone defaults must be specified at head of %1 file區間之預設定義必須於%1檔案的表頭描述Only one set of zone defaults may be specified in %1 file%1檔案內僅允許一組區間之預設定義line %1: read new range without reading any zones for previous one第%1行:未讀取前一區間前讀取新範圍數值line %1: read zone without preceding date range第%1行:讀取區間但無相對之時間範圍attempt to set zone based on % of CP without setting CP in line number %1.
未設定CP%1無法以CP百分比設定區間file ended without reading any zones for last range未讀取最後範圍之區間定義,檔案已結束Setting end date of range %1 to start date of range %2.
將範圍%1之結束日定義成範圍%2起始日Extending final range %1 to infinite to include present date.
將範圍%1延長之永久,以包含當天日期。CP must be greater than zero in zone range %1 of %2在區段%2定義範圍%1,CP必須大於零Range %1: matching top of zone %2 (%3) to bottom of zone %4 (%5).
範圍%1:將區間上限%2 (%3)匹配至區間下限%4 (%5)。Range %1: setting top of zone %2 from %3 to MAX.
範圍%1:將區間上限%2設定從%3修正至MAX。Critical Power (watts): %1臨界功率 (w): %1<td align="center">Low (watts)</td><td align="center">最低 (w)</td><td align="center">High (watts)</td><td align="center">最高 (w)</td><td align="center">%</td><td align="center">%</td>Problem Saving Power Zones無法儲存功率區間File: %1 cannot be opened for 'Writing'. Please check file properties.檔案: %1 無法寫入,請確認檔案屬性是否為唯讀<td align="center">Zone</td><td align="center">區間</td><td align="center">Description</td><td align="center">説明</td><td align="center">Time</td><td align="center">時間</td>aBikeScoreSkiba's altitude adjusted stress score taking into account both the intensity and the duration of the training session plus the altitude effect, similar to aBikeStress it can be computed as 100 * hours * (aPower Relative Intensity)^2Skiba之高度調整壓力指數考量訓練活動在高處影響下之強度及持續時間,與aBikeStress相類似,計算法為100乘以小時數乘aPower相對強度的二次方aBikeStressAltitude Adjusted Training Stress Score takes into account both the intensity and the duration of the training session plus the altitude effect, it can be computed as 100 * hours * aIF^2Skiba之高度調整壓力指數考量訓練活動在高處影響下之強度及持續時間,計算法為100乘以小時數乘aIF的二次方aEfficiencyFactoraPower Efficiency FactoraPower效率系數The ratio between aIsoPower and Average HRaIsoPower及平均心率的比aIntensityFactorAltitude Adjusted Intensity Factor is the ratio between aIsoPower and the Critical Power (CP) configured in Power Zones.高度調整強度因數為aIsoPower及功率區間設定CP之比例aIsoPowerAltitude Adjusted Iso Power is an estimate of the power that you could have maintained for the same physiological 'cost' if your power output had been perfectly constant accounting for altitude.高度調整IsoPower,是假設功率輸出在完美穩定狀態並考量高度影響下,相同身心耗費可維持之功率輸出量。aRelativeIntensityaPower Relative IntensityaPower相對強度Altitude Adjusted Relative Intensity is the ratio between axPower and the Critical Power (CP) configured in Power Zones, similar to aIF.高度調整相對強度為axPower及功率區間設定CP之比例,和aIF類似。aResponseIndexaPower Response IndexaPower反應指數The ratio between axPower and Average HR, similar to aPower Efficiency FactoraxPower及平均心率的比,與aPower效率因素類似aTISSAerobic TISS有氧TISSAerobic Training Impact Scoring System. It's a metric to quantify the training strain or response on the aerobic system有氧訓練衝量指數,為有氧系統訓練量量測指數Anaerobic TISS無氧TISSAnaerobic Training Impact Scoring System. It's a metric to quantify the training strain or response on the anaerobic system無氧訓練衝量指數,為無氧系統訓練量量測指數aTSSPerHouraBikeStress per hour每小時之aBikeStressAltitude Adjusted Training Stress Score divided by Duration in hours高度調整訓練壓力指數除以持續小時aVIAltitude Adjusted Variability Index is the ratio between aIsoPower and Average aPower.高度調整變化指數為aIsoPower及平均aPower之比率。aVariabilityIndexSkiba aVISkiba aVISkiba Altitude Adjusted Variability Index is the ratio between axPower and Average aPower.Skiba高度調整變化指數為axPower及平均aPower之比率。aXPoweraxPoweraxPowerwattswAltitude Adjusted xPower is an estimate of the power that you could have maintained for the same physiological 'cost' if your power output had been perfectly constant at altitude, similar to aIsoPower.高度調整xPower,是假設功率輸出在完美穩定狀態並考量高度影響下,相同身心耗費可維持之功率輸出量。類似aIsoPower。addXDataCommandAdd XData新增XDataavnnAverage of all NN intervalsRR區段之平均msecmsecdTISSTISS AerobicityTISS帶氧度TISS Aerobicity is a percentage of Aerobic TISS of the total TISSTISS帶氧度是帶氧TISS與總TISS之百分比deviceModelDevice Name裝置名Device Type裝置類別Port Spec連接埠參數Profile簡要資訊Virtual虛擬的hrv_recovery_pointsHRV Recovery PointsHRV恢復點Natural Log transform of rMSSD, measured at restrMSSD靜止量測值之自然對數pnnxpNNpNNpct%Percentage of differences between adjacent NN intervals that are greater than %1 msNN區段相鄰差大於%1ms之百分比rest_avnnRest AVNN静止AVNNmsecmsecAverage of all NN intervals measured at rest靜止時RR區段之平均rest_hfRest HF静止HFmsec^2msec^2High Frequency Power HRV, measured at rest靜止時高頻率之功率HRVrest_hrRest HR静止心率bpmbpmAverage HR measured at rest靜止時量測之平均心率rest_lfRest LF静止LFmsec^2msec^2Low Frequency Power HRV, measured at rest靜止時低頻率之功率HRVrest_pNN50Rest PNN50静止PNN50pct%Percentage of differences between adjacent NN intervals that are greater than 50 ms, measured at rest靜止時NN區段相鄰差大於50ms之百分比rest_rmssdRest rMSSD静止rMSSDmsecmsecSquare root of the mean of the squares of differences between adjacent NN intervals, measured at rest靜止時NN區段相鄰差之方均根rest_sdnnRest SDNN静止SDNNmsecmsecStandard deviation of all NN intervals measured at rest靜止時NN區段標準差rmssdrMSSDrMSSDmsecmsecSquare root of the mean of the squares of differences between adjacent NN intervalsNN區段相鄰差之方均根sdannSDANNSDANNmsecmsecStandard deviation of all NN intervals in all 5-minute segments of a 24-hour recording在24小時紀錄的所有5秒區段中,NN區段的標準差sdnnStandard deviation of NNNN標準差msecmsecStandard deviation of all NN intervals所有NN區段之標準差sdnnidxSDNNIDXSDNNIDXmsecmsecAverage of the standard deviations of NN intervals in all 5-minute segments of a 24-hour recording在24小時紀錄的所有5秒區段中,NN區段標準差之平均值wbalzoneLow FatigueModerate Fatigue中度疲勞Heavy Fatigue重度疲勞Severe Fatigue極端疲勞