# zh_CN translation of ghex. # Copyright (C) 2009, 2010 Free Software Foundation, Inc. # This file is distributed under the same license as the ghex package. # Wang Jian , 2001,2003 # Zhang Miao , 2009 # du baodao , 2010 # YunQiang Su , 2014. # Jane Doe , 2025. # lumingzh , 2025. # msgid "" msgstr "" "Project-Id-Version: ghex master\n" "Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/ghex/issues/\n" "POT-Creation-Date: 2025-06-24 12:25+0000\n" "PO-Revision-Date: 2025-06-25 19:25+0800\n" "Last-Translator: lumingzh \n" "Language-Team: Chinese (China) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-DL-Lang: zh_CN\n" "X-DL-Module: ghex\n" "X-DL-Branch: master\n" "X-DL-Domain: po\n" "X-DL-State: None\n" "X-Generator: Gtranslator 48.0\n" #: data/org.gnome.GHex.appdata.xml.in.in:6 #: src/ghex-application-window.ui.in:151 msgid "GHex" msgstr "GHex" #: data/org.gnome.GHex.appdata.xml.in.in:7 data/org.gnome.GHex.desktop.in.in:6 msgid "Inspect and edit binary files" msgstr "查看和编辑二进制文件" #: data/org.gnome.GHex.appdata.xml.in.in:9 msgid "GHex is a hex editor for the GNOME desktop." msgstr "GHex 是一款用于 GNOME 桌面的十六进制编辑器。" #: data/org.gnome.GHex.appdata.xml.in.in:12 msgid "" "GHex can load raw data from binary files and display them for editing in the " "traditional hex editor view. The display is split in two columns, with " "hexadecimal values in one column and the ASCII representation in the other. " "GHex is a useful tool for working with raw data." msgstr "" "GHex 可以从二进制文件中加载原始数据,并在传统十六进制编辑器视图中显示以供编" "辑。视图分为两列,一列显示十六进制,另一列则是 ASCII 表示。 GHex是一款用于处" "理原始数据的实用工具。" #: data/org.gnome.GHex.desktop.in.in:5 msgid "Hex Editor" msgstr "十六进制编辑器" #. Translators: Search terms to find this application. Do NOT translate or localize the semicolons! The list MUST also end with a semicolon! Here, 'binary' means a binary file (not the base-2 numeric system). #: data/org.gnome.GHex.desktop.in.in:8 msgid "binary;debug;hexadecimal;" msgstr "binary;debug;hexadecimal;二进制;调试;十六进制;" #: data/org.gnome.GHex.desktop.in.in:21 msgid "New Window" msgstr "新建窗口" #: src/chartable.ui:30 msgid "Character table" msgstr "字符表" #: src/chartable.ui:44 src/find-options.ui:69 msgid "ASCII" msgstr "ASCII" #: src/chartable.ui:69 src/find-options.ui:65 msgid "Hex" msgstr "十六进制" #: src/chartable.ui:94 src/preferences.ui:164 msgid "Decimal" msgstr "十进制" #: src/chartable.ui:119 msgid "Octal" msgstr "八进制" #: src/chartable.ui:144 msgid "Binary" msgstr "二进制" #: src/common-ui.c:246 msgid "" "This program is free software; you can redistribute it and/or modify it " "under the terms of the GNU General Public License as published by the Free " "Software Foundation; either version 2 of the License, or (at your option) " "any later version." msgstr "" "本程序是自由软件。您可以在自由软件基金会发布的 GNU 通用公共许可协议第二版或更" "新版本的条款下重新发布或修改它。" #: src/common-ui.c:250 msgid "" "This program is distributed in the hope that it will be useful, but WITHOUT " "ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or " "FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for " "more details." msgstr "" "本软件发布的初衷是希望它更有用,但是不承担任何使用风险。不论是明确的,还是隐" "含的。包括但不限于隐含求的适销和适合特定用途的保证。查看 GNU 通用公共许可协" "议 来了解详情。" #: src/common-ui.c:254 msgid "" "You should have received a copy of the GNU General Public License along with " "this program; if not, write to the Free Software Foundation, Inc., 51 " "Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA" msgstr "" "您应当随本程序收到 GNU 通用公共许可协议的一份副本。如果没有,给自由软件基金会" "写信:the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, " "Boston, MA 02110-1301 USA" #. Translators: these two strings here indicate the copyright time span, #. e.g. 1998-2018. #: src/common-ui.c:266 #, c-format msgid "Copyright © %d–%d The GHex authors" msgstr "版权所有 © %d–%d GHex 作者" # https://l10n.gnome.org/vertimus/ghex/master/po/zh_CN/level2/ #: src/common-ui.c:286 msgid "translator-credits" msgstr "" "Wang Jian , 2001, 2003\n" "Zhang Miao , 2009\n" "du baodao , 2010\n" "YunQiang Su , 2014\n" "butter temple , 2024\n" "Jane Doe , 2025\n" "lumingzh , 2025" #. Translators: This is an error string for a print-related error #. * dialog. The %s is the error generated by GError. #: src/common-ui.c:351 #, c-format msgid "An error has occurred: %s" msgstr "出现错误:%s" #: src/common-ui.c:372 src/find-dialog.ui:99 src/jump-dialog.ui:64 #: src/mark-dialog.ui:152 msgid "Close" msgstr "关闭" #: src/converter.c:166 msgid "Base Converter" msgstr "数制转换器" #. entries #: src/converter.c:176 msgid "_Binary:" msgstr "二进制(_B):" #: src/converter.c:178 msgid "_Octal:" msgstr "八进制(_O):" #: src/converter.c:180 msgid "_Decimal:" msgstr "十进制(_D):" #: src/converter.c:182 msgid "_Hex:" msgstr "十六进制(_H):" #: src/converter.c:184 msgid "_ASCII:" msgstr "ASCII(_A):" #. get cursor button #: src/converter.c:188 msgid "_Get cursor value" msgstr "获取光标处值(_G)" #: src/converter.c:189 msgid "_Close" msgstr "关闭(_C)" #: src/converter.c:199 msgid "Gets the value at cursor in binary, octal, decimal, hex and ASCII" msgstr "获取光标处的二进制、八进制、十进制、十六进制和 ASCII 形式的值" #: src/converter.c:339 msgid "ERROR" msgstr "错误" #: src/find-dialog.ui:38 msgid "Enter the hex data or ASCII data to search for" msgstr "输入要查找的十六进制数据或 ASCII 数据" #: src/find-dialog.ui:41 msgid "Find String" msgstr "查找字符串" #: src/find-dialog.ui:58 msgid "Find _Next" msgstr "查找下一个(_N)" #: src/find-dialog.ui:62 msgid "Finds the next occurrence of the search string" msgstr "查找搜索字符串的下一个匹配项" #: src/find-dialog.ui:67 msgid "Find _Previous" msgstr "查找上一个(_P)" #: src/find-dialog.ui:70 msgid "Finds the previous occurrence of the search string" msgstr "查找搜索字符串的上一个匹配项" #: src/find-dialog.ui:75 msgid "_Clear" msgstr "清除(_C)" #: src/find-dialog.ui:78 msgid "Clears the data you are searching for" msgstr "清空您正在查找的数据" #: src/find-dialog.ui:88 msgid "Find options" msgstr "查找选项" #: src/find-dialog.ui:89 msgid "View options of the find pane" msgstr "查看查找窗格的选项" #: src/find-dialog.ui:100 msgid "Closes the find pane" msgstr "关闭查找窗格" #: src/find-options.ui:35 msgid "_Regular expressions" msgstr "正则表达式(_R)" #: src/find-options.ui:44 msgid "_Ignore case" msgstr "忽略大小写(_I)" #: src/find-options.ui:60 msgid "Show:" msgstr "显示:" #: src/find-options.ui:73 src/preferences.ui:170 msgid "Both" msgstr "两者" #: src/findreplace.c:222 msgid "No string provided." msgstr "未提供需要查找的字符。" #: src/findreplace.c:396 msgid "" "Beginning of file reached.\n" "\n" "No further matches found." msgstr "" "已查找到文件开头。\n" "\n" "没有更多结果。" #: src/findreplace.c:398 msgid "" "Beginning of file reached.\n" "\n" "No occurrences found from cursor." msgstr "" "已查找到文件开头。\n" "\n" "光标后没有更多结果。" #: src/findreplace.c:408 msgid "" "End of file reached.\n" "\n" "No further matches found." msgstr "" "已查找到文件末尾。\n" "\n" "没有更多结果。" #: src/findreplace.c:410 msgid "" "End of file reached.\n" "\n" "No occurrences found from cursor." msgstr "" "已查找到文件末尾。\n" "\n" "光标后没有更多结果。" #: src/findreplace.c:481 msgid "No offset has been specified." msgstr "未指定偏移值。" #: src/findreplace.c:506 msgid "The specified offset is beyond the file boundaries." msgstr "指定的偏移值超出文件边界。" #: src/findreplace.c:514 msgid "Can not position cursor beyond the end of file." msgstr "无法将光标定位到文件末尾之后。" #: src/findreplace.c:525 msgid "" "You may only give the offset as:\n" " - a positive decimal number, or\n" " - a hex number, beginning with '0x', or\n" " - a '+' or '-' sign, followed by a relative offset" msgstr "" "您只能以以下形式给定偏移值:\n" " - 十进制的正数,或\n" " - 十六进制数,以'0x'开头\n" " - '+' 或 '-' 跟一个相对偏移值" #: src/findreplace.c:584 msgid "String was not found." msgstr "未找到字符串。" #: src/findreplace.c:648 #, c-format msgid "Search complete: %d replacements made." msgstr "搜索完成:做出了 %d 个替换。" #: src/findreplace.c:655 msgid "No occurrences were found." msgstr "未找到匹配项。" #. Translators: this is the string for an untitled buffer that will #. * be displayed in the titlebar when a user does File->New #. #: src/ghex-application-window.c:43 src/hex-document.c:1141 msgid "Untitled" msgstr "无标题" #: src/ghex-application-window.c:357 msgid "There was an error saving the file." msgstr "保存文件时出现错误。" # gnome-text-editor将此文本译为“保存更改?”,但apostrophe却将其译为“保存更改吗?”。 需要统一用语。 #: src/ghex-application-window.c:397 msgid "Save Changes?" msgstr "保存更改?" #: src/ghex-application-window.c:400 msgid "" "Open documents contain unsaved changes.\n" "Changes which are not saved will be permanently lost." msgstr "" "打开的文档包含未保存的更改。\n" "未保存的更改将永久丢失。" #: src/ghex-application-window.c:403 src/ghex-application-window.c:532 #: src/ghex-application-window.c:1247 src/paste-special.ui:53 msgid "_Cancel" msgstr "取消(_C)" #: src/ghex-application-window.c:404 src/ghex-application-window.c:533 msgid "_Discard" msgstr "丢弃(_D)" #. Translators: %s is the filename that is currently being #. * edited. #: src/ghex-application-window.c:520 #, c-format msgid "%s has been edited since opening." msgstr "%s 在开启后已被编辑。" #: src/ghex-application-window.c:524 msgid "The buffer has been edited since opening." msgstr "缓冲区在开启后已被编辑。" #: src/ghex-application-window.c:527 msgid "Would you like to save your changes?" msgstr "是否保存更改?" #: src/ghex-application-window.c:534 msgid "_Save" msgstr "保存(_S)" #: src/ghex-application-window.c:1105 msgid "There was an error saving the file to the path specified." msgstr "保存文件到指定路径时出现错误。" #: src/ghex-application-window.c:1124 msgid "" "An unknown error has occurred in attempting to reload the file you have just " "saved." msgstr "重新加载刚才保存的文件时发生了未知错误。" #: src/ghex-application-window.c:1177 msgid "Select a file to save buffer as" msgstr "选择用来保存缓冲区的文件" #. Translators: %s here is the filename the user is being asked to #. * confirm whether they want to revert. #: src/ghex-application-window.c:1242 #, c-format msgid "Are you sure you want to revert %s?" msgstr "您确定要还原 %s 吗?" #: src/ghex-application-window.c:1244 msgid "" "Your changes will be lost.\n" "This action cannot be undone." msgstr "" "您的改动将会丢失。\n" "此操作无法被撤销。" #: src/ghex-application-window.c:1248 src/ghex-application-window.ui.in:39 msgid "_Revert" msgstr "还原(_R)" #: src/ghex-application-window.c:1338 msgid "Select a file to open" msgstr "选择要打开的文件" #: src/ghex-application-window.c:1446 #, c-format msgid "" "Sorry, but help could not be opened.\n" "\n" "Various attempts were made to locate the help documentation unsuccessfully.\n" "\n" "Please ensure the application was properly installed.\n" "\n" "The specific error message is:\n" "\n" "%s" msgstr "" "很抱歉,但无法打开帮助。\n" "\n" "已多次尝试定位帮助文档,但均未成功。\n" "\n" "请确保应用程序已被正确安装。\n" "\n" "具体错误信息为:\n" "\n" "%s" #: src/ghex-application-window.c:1643 #, c-format msgid "" "Offset: 0x%lX; 0x%lX bytes from 0x%lX to " "0x%lX selected" msgstr "" "偏移值: 0x%lX; 0x%lX 个字节,从 0x%lX 到 " "0x%lX 已被选择" #: src/ghex-application-window.c:1646 #, c-format msgid "Offset: 0x%lX" msgstr "偏移值: 0x%lX" #: src/ghex-application-window.c:1653 #, c-format msgid "" "Offset: %ld; %ld bytes from %ld to %ld " "selected" msgstr "" "偏移值: %ld; %ld 个字节,从 %ld 到 %ld " "已被选择" #: src/ghex-application-window.c:1656 #, c-format msgid "Offset: %ld" msgstr "偏移值: %ld" #. Weird rendering if you don't put the space at the start #: src/ghex-application-window.c:1664 #, c-format msgid "" " HEX Offset: 0x%lX; 0x%lX bytes from 0x%lX to 0x%lX selected DEC Offset: %ld; %ld bytes from %ld to %ld selected" msgstr "" " HEX 偏移值: 0x%lX; 0x%lX 个字节,从 " "0x%lX 到 0x%lX 已选择 DEC 偏移值: %ld; %ld 个字节,从 %ld 到 %ld 已选择" #: src/ghex-application-window.c:1668 #, c-format msgid "" " HEX Offset: 0x%lX DEC Offset: %ld" msgstr "" " HEX 偏移值: 0x%lX DEC 偏移值: %ld" #: src/ghex-application-window.c:2511 msgid "" "You are attempting to open a file 1GB or larger.\n" "\n" "This can make GHex and your machine unstable as the file will be loaded into " "memory, using the active backend.\n" "\n" "Are you sure you want to proceed?\n" "\n" "This message will not be shown again for the remainder of this GHex " "session.\n" "\n" "To avoid this message from appearing, try using a different buffer backend." msgstr "" "您正在尝试打开一个 1GB 或更大的文件。\n" "\n" "文件会被活跃后端加载到内存中,这可能使 GHex 或您的机器变得不稳定。\n" "\n" "您确定要继续吗?\n" "\n" "此消息不会在此 GHex 会话中再次显示。\n" "\n" "若想避免此消息出现,可以尝试使用不同的缓冲区后端。" #: src/ghex-application-window.c:2569 msgid "There was an error reading the file." msgstr "读取文件时出错。" #: src/ghex-application-window.c:2630 msgid "" "There was an error loading the requested file. The file either no longer " "exists, is inaccessible, or you may not have permission to access the file." msgstr "" "加载已请求文件时出现错误。文件可能不再存在、无法被访问或您没有权限访问文件。" #: src/ghex-application-window.ui.in:31 msgid "_New Window" msgstr "新建窗口(_N)" #: src/ghex-application-window.ui.in:35 msgid "Save _As" msgstr "另存为(_A)" #: src/ghex-application-window.ui.in:46 msgid "_Print" msgstr "打印(_P)" #: src/ghex-application-window.ui.in:50 msgid "Print Previe_w" msgstr "打印预览(_W)" #: src/ghex-application-window.ui.in:58 msgid "Find and _Replace" msgstr "查找和替换(_R)" #: src/ghex-application-window.ui.in:62 msgid "_Jump to Byte" msgstr "跳转到字节(_J)" #: src/ghex-application-window.ui.in:66 msgid "_Marks" msgstr "标记(_M)" #: src/ghex-application-window.ui.in:76 msgid "_Edit" msgstr "编辑(_E)" #: src/ghex-application-window.ui.in:78 msgid "_Copy Special" msgstr "特殊复制(_C)" #: src/ghex-application-window.ui.in:82 msgid "_Paste Special" msgstr "特殊粘贴(_P)" #: src/ghex-application-window.ui.in:86 msgid "G_roup Data As" msgstr "将数据分组为(_R)" #: src/ghex-application-window.ui.in:88 msgid "_Bytes (8-bit)" msgstr "字节(8 位)(_B)" #: src/ghex-application-window.ui.in:94 msgid "_Words (16-bit)" msgstr "字(16 位)(_W)" #: src/ghex-application-window.ui.in:99 msgid "_Longwords (32-bit)" msgstr "长字(32 位)(_L)" #: src/ghex-application-window.ui.in:104 msgid "_Quadwords (64-bit)" msgstr "四字(64 位)(_Q)" #: src/ghex-application-window.ui.in:113 msgid "_Tools" msgstr "工具(_T)" #: src/ghex-application-window.ui.in:115 msgid "_Character Table" msgstr "字符表(_C)" #: src/ghex-application-window.ui.in:119 msgid "_Base Converter" msgstr "数制转换程序(_B)" #: src/ghex-application-window.ui.in:128 msgid "_Keyboard Shortcuts" msgstr "键盘快捷键(_K)" #: src/ghex-application-window.ui.in:133 msgid "_Preferences" msgstr "首选项(_P)" #: src/ghex-application-window.ui.in:138 msgid "_Help" msgstr "帮助(_H)" #: src/ghex-application-window.ui.in:143 msgid "_About GHex" msgstr "关于 GHex(_A)" #: src/ghex-application-window.ui.in:172 msgid "Open a file for hex editing" msgstr "打开一个用于十六进制编辑的文件" #: src/ghex-application-window.ui.in:175 msgid "_Open" msgstr "打开(_O)" #: src/ghex-application-window.ui.in:187 src/help-overlay.ui:19 msgid "New blank hex buffer" msgstr "新空白十六进制缓冲区" #: src/ghex-application-window.ui.in:196 msgid "Main Menu" msgstr "主菜单" #: src/ghex-application-window.ui.in:198 msgid "Main menu" msgstr "主菜单" #: src/ghex-application-window.ui.in:208 msgid "Find a string in the hex document" msgstr "在十六进制文档中查找字符串" #: src/ghex-application-window.ui.in:217 msgid "Save document" msgstr "保存文档" #: src/ghex-application-window.ui.in:225 msgid "No File Loaded" msgstr "未加载文件" #: src/ghex-application-window.ui.in:228 msgid "" "• Press the Open button\n" "• Press Ctrl+T to start a new document\n" "• Press Ctrl+O to browse for a document\n" "\n" "Or, press Ctrl+W to close the window." msgstr "" "• 按“打开”按钮\n" "• 按 Ctrl+T 以打开新文档\n" "• 按 Ctrl+O 以浏览文档\n" "\n" "或者,按 Ctrl+W 以关闭窗口。" #: src/ghex-application-window.ui.in:317 msgid "Toggle insert mode (add data to file rather than replace existing data)" msgstr "切换插入模式(向文件添加数据而非替换现有数据)" #: src/ghex-application-window.ui.in:329 msgid "Toggle a pane showing various numeric conversions" msgstr "切换一个显示多种数值转换的窗格" #: src/gtkhex.ui:23 msgid "Automatic geometry" msgstr "自动几何" #: src/gtkhex.ui:33 msgid "Characters per line:" msgstr "每行字符数:" #: src/gtkhex.ui:62 msgid "_Undo" msgstr "撤消(_U)" #: src/gtkhex.ui:66 msgid "_Redo" msgstr "重复(_R)" #: src/gtkhex.ui:72 msgid "Cu_t" msgstr "剪切(_T)" #: src/gtkhex.ui:76 src/paste-special.c:450 msgid "_Copy" msgstr "复制(_C)" #: src/gtkhex.ui:80 src/paste-special.ui:47 msgid "_Paste" msgstr "粘贴(_P)" #: src/gtkhex.ui:86 msgid "_Geometry" msgstr "几何(_G)" #: src/help-overlay.ui:14 msgid "Files" msgstr "文件" #: src/help-overlay.ui:26 msgid "Open a file for editing" msgstr "打开用于编辑的文件" #: src/help-overlay.ui:33 msgid "Save file" msgstr "保存文件" #: src/help-overlay.ui:40 msgid "Save as" msgstr "另存为" #: src/help-overlay.ui:47 msgid "Close tab" msgstr "关闭标签页" #: src/help-overlay.ui:54 msgid "Print the hex file" msgstr "打印十六进制文件" #: src/help-overlay.ui:63 msgid "Undo and Redo" msgstr "撤消和重做" #: src/help-overlay.ui:68 msgid "Undo" msgstr "撤消" #: src/help-overlay.ui:75 msgid "Redo" msgstr "重做" #: src/help-overlay.ui:84 msgid "Find and Replace" msgstr "查找和替换" #: src/help-overlay.ui:89 msgid "Find" msgstr "查找" #: src/help-overlay.ui:96 msgid "Find and replace" msgstr "查找和替换" #: src/help-overlay.ui:105 msgid "Marks" msgstr "标记" #: src/help-overlay.ui:110 msgid "Marks dialog" msgstr "标记对话框" #: src/help-overlay.ui:117 msgid "Activate mark (0-9)" msgstr "激活标记(0-9)" #: src/help-overlay.ui:126 msgid "Clipboard" msgstr "剪贴板" #: src/help-overlay.ui:131 msgid "Copy" msgstr "复制" #: src/help-overlay.ui:138 msgid "Cut" msgstr "剪切" #: src/help-overlay.ui:145 msgid "Paste" msgstr "粘贴" #: src/help-overlay.ui:152 msgid "Copy special" msgstr "特殊复制" #: src/help-overlay.ui:159 msgid "Paste special" msgstr "特殊粘贴" #: src/help-overlay.ui:168 msgid "Navigation" msgstr "导航" # Evince 和 Builder 均将 Toggle 译为切换 #: src/help-overlay.ui:173 msgid "Toggle left (hex) display" msgstr "切换左侧(十六进制)显示" #: src/help-overlay.ui:180 msgid "Toggle right (ASCII) display" msgstr "切换右侧(ASCII)显示" #: src/help-overlay.ui:187 msgid "Switch to previous tab" msgstr "切换到上一个标签页" #: src/help-overlay.ui:194 msgid "Switch to next tab" msgstr "切换到下一个标签页" #: src/help-overlay.ui:201 msgid "Jump to byte" msgstr "跳转到字节位置" #: src/help-overlay.ui:208 msgid "Move to beginning of document" msgstr "移动到文档开头" #: src/help-overlay.ui:215 msgid "Move to end of document" msgstr "移动到文档末尾" #: src/help-overlay.ui:224 msgid "General" msgstr "常规" #: src/help-overlay.ui:229 msgid "New window" msgstr "新建窗口" #: src/help-overlay.ui:236 msgid "Show help" msgstr "显示帮助" #: src/help-overlay.ui:243 msgid "Show preferences" msgstr "显示首选项" #: src/help-overlay.ui:250 msgid "Toggle insert mode" msgstr "切换插入模式" #: src/hex-buffer-direct.c:42 src/hex-buffer-mmap.c:50 msgid "The file appears to have an invalid path." msgstr "文件路径似乎无效。" #. Translators: the first '%s' is the blurb indicating some kind of an #. * error has occurred (eg, 'An error has occurred', and the the 2nd '%s' #. * is the standard error message that will be reported from the system #. * (eg, 'No such file or directory'). #. #: src/hex-buffer-direct.c:143 src/hex-buffer-mmap.c:173 #, c-format msgid "%s: %s" msgstr "%s:%s" #: src/hex-buffer-direct.c:193 msgid "Failed to read data from file." msgstr "从文件读取数据失败。" #: src/hex-buffer-direct.c:212 src/hex-buffer-mmap.c:587 msgid "Unable to retrieve file or directory information" msgstr "无法获取文件或目录信息" #: src/hex-buffer-direct.c:221 src/hex-buffer-mmap.c:596 msgid "Unable to create file" msgstr "无法创建文件" #: src/hex-buffer-direct.c:230 msgid "Not a regular file or block device" msgstr "非常规文件或块设备" #: src/hex-buffer-direct.c:240 src/hex-buffer-mmap.c:615 msgid "Unable to open file for reading" msgstr "无法打开用于读取的文件" #: src/hex-buffer-direct.c:404 msgid "Unable to read file" msgstr "无法读取文件" #: src/hex-buffer-direct.c:417 msgid "Error attempting to read block device" msgstr "尝试读取块设备时出现错误" #: src/hex-buffer-direct.c:527 msgid "" "With direct-write mode, you cannot save a file to a path other than its " "originating path" msgstr "使用直接写入模式时,您无法将文件保存到原始路径以外的路径" #: src/hex-buffer-direct.c:552 msgid "Error writing changes to file" msgstr "向文件写入改动时出错" #: src/hex-buffer-mmap.c:310 #, c-format msgid "Could not adjust %s from %lu to %lu bytes" msgstr "无法将 %s 从 %lu 调整到 %lu 字节" # 是否要翻译 File descriptor? #: src/hex-buffer-mmap.c:359 #, c-format msgid "Fatal error: Memory mapping of file (%lu bytes, fd %d) failed" msgstr "致命错误:文件 (%lu 字节,fd %d) 的内存映射失败" #: src/hex-buffer-mmap.c:605 msgid "Not a regular file" msgstr "非常规文件" #: src/hex-buffer-mmap.c:646 msgid "Failed to open temporary file." msgstr "打开临时文件失败。" #: src/hex-buffer-mmap.c:685 msgid "Error reading file" msgstr "读取文件时出错" #: src/hex-buffer-mmap.c:701 msgid "An error has occurred" msgstr "发生错误" #: src/hex-dialog.c:70 msgid "Signed 8 bit:" msgstr "有符号 8 位:" #: src/hex-dialog.c:71 msgid "Unsigned 8 bit:" msgstr "无符号 8 位:" #: src/hex-dialog.c:72 msgid "Signed 16 bit:" msgstr "有符号 16 位:" #: src/hex-dialog.c:73 msgid "Unsigned 16 bit:" msgstr "无符号 16 位:" #: src/hex-dialog.c:74 msgid "Signed 32 bit:" msgstr "有符号 32 位:" #: src/hex-dialog.c:75 msgid "Unsigned 32 bit:" msgstr "无符号 32 位:" #: src/hex-dialog.c:76 msgid "Signed 64 bit:" msgstr "有符号 64 位:" #: src/hex-dialog.c:77 msgid "Unsigned 64 bit:" msgstr "无符号 64 位:" #: src/hex-dialog.c:78 msgid "Float 32 bit:" msgstr "32 位浮点数:" #: src/hex-dialog.c:79 msgid "Float 64 bit:" msgstr "64 位浮点数:" #: src/hex-dialog.c:80 msgid "Hexadecimal:" msgstr "十六进制:" #: src/hex-dialog.c:81 msgid "Octal:" msgstr "八进制:" #: src/hex-dialog.c:82 msgid "Binary:" msgstr "二进制:" #: src/hex-dialog.c:201 msgid "Show little endian decoding" msgstr "显示小尾序解码" #: src/hex-dialog.c:207 msgid "Show unsigned and float as hexadecimal" msgstr "以十六进制显示无符号数和浮点数" #: src/hex-dialog.c:213 msgid "Stream Length:" msgstr "流长度:" #: src/hex-document.c:1169 #, c-format msgid "Page" msgstr "页" #: src/hex-document.c:1175 src/hex-document.c:1278 #, c-format msgid "Hex dump generated by" msgstr "十六进制转储生成" #: src/hex-document.c:1201 #, c-format msgid "Previous page" msgstr "上一页" #: src/hex-document.c:1216 #, c-format msgid "Next page" msgstr "下一页" #: src/hex-info-bar.c:207 msgid "File Has Changed on Disk" msgstr "文件在磁盘上已修改" #: src/hex-info-bar.c:211 msgid "The file has been changed by another program." msgstr "文件已被另一个程序更改。" #: src/hex-info-bar.ui:69 msgid "_Discard Changes and Reload" msgstr "丢弃更改并重新载入(_D)" #: src/jump-dialog.ui:35 msgid "Jump to byte (enter offset):" msgstr "跳转到字节位置(输入偏移值):" #: src/jump-dialog.ui:44 msgid "" "Enter the offset byte to jump to. The default is decimal format, but other " "format strings are supported such as hexadecimal format, if C-style notation " "using the '0x' prefix is used. If your string is not recognized, a dialog " "will be presented explaining the valid formats of strings accepted." msgstr "" "输入要跳转到的偏移字节。默认使用十进制格式,但其他字符串格式同样受支持,如带" "有 C 风格“0x”前缀记号的十六进制格式。如果您的字符串未能被识别,一个解释可用字" "符串格式的对话框将会显示。" #: src/jump-dialog.ui:49 src/mark-dialog.ui:110 msgid "_Jump" msgstr "跳转(_J)" #: src/jump-dialog.ui:55 msgid "Jumps to the specified byte" msgstr "跳转到指定的字节位置" #: src/jump-dialog.ui:65 msgid "Closes the jump-to-byte pane" msgstr "关闭“跳转到字节位置”窗格" #: src/main.c:44 msgid "Open a new window" msgstr "打开新窗口" #: src/main.c:50 msgid "Show the application version" msgstr "显示应用程序版本" #: src/main.c:109 #, c-format msgid "This is GHex, version %s\n" msgstr "这是 GHex,版本 %s\n" #: src/main.c:194 msgid "GHex - A hex editor for the GNOME desktop" msgstr "GHex — 用于 GNOME 桌面的十六进制编辑器" #. Translators: this is meant to show a range of hex offset values. #. * eg, "0xAA - 0xFF" #. #: src/mark-dialog.c:125 #, c-format msgid "0x%lX - 0x%lX" msgstr "0x%lX - 0x%lX" #: src/mark-dialog.ui:36 msgid "Mark:" msgstr "标记:" #: src/mark-dialog.ui:50 msgid "Select the desired mark to set, jump to, or delete" msgstr "选择用于设置、跳转或删除的标记" #: src/mark-dialog.ui:58 msgid "Optional custom color for the mark" msgstr "可选的自定义标记颜色" #: src/mark-dialog.ui:74 msgid "Pick a custom color for the mark, if desired." msgstr "若有需要,为标记选择一个自定义颜色" #: src/mark-dialog.ui:96 msgid "_Set" msgstr "设置(_S)" #: src/mark-dialog.ui:103 msgid "Set a mark on a byte or range of bytes" msgstr "在一个或一系列字节上设置标记" #: src/mark-dialog.ui:122 msgid "Bring the cursor to the specified mark" msgstr "将光标移到指定标记" #: src/mark-dialog.ui:129 msgid "_Delete" msgstr "删除(_D)" #: src/mark-dialog.ui:141 msgid "Delete the specified mark" msgstr "删除指定的标记" #: src/mark-dialog.ui:153 msgid "Closes the marks pane" msgstr "关闭标记窗格" #: src/paste-special.c:224 #, c-format msgid "Failed to paste. Unexpected end of text" msgstr "粘贴失败。意外的文本末尾" #: src/paste-special.c:238 #, c-format msgid "Failed to paste. The pasted string contains an invalid hex digit." msgstr "粘贴失败。粘贴的字符串包含无效的十六进制数字。" #: src/paste-special.c:335 msgid "GHex Paste Data" msgstr "GHex 粘贴数据" #: src/paste-special.c:452 msgid "Copy Special" msgstr "特殊复制" #: src/paste-special.c:557 msgid "Plain text (as ASCII)" msgstr "纯文本(ASCII)" # Unicode 的翻译不统一,Characters 和 Meld 将其译为万国码,但也有应用选择保留原文,如 Disks 和 Totem #: src/paste-special.c:574 msgid "Plain text (Unicode)" msgstr "纯文本(Unicode)" #: src/paste-special.c:578 msgid "Plain text (as hex string representing bytes)" msgstr "纯文本(以 HEX 字符串表示字节)" #: src/paste-special.ui:28 msgid "Paste Special" msgstr "特殊粘贴" #: src/preferences.ui:28 msgid "Preferences" msgstr "首选项" #: src/preferences.ui:33 msgid "Display" msgstr "显示" #: src/preferences.ui:37 msgid "Appearance" msgstr "外观" #: src/preferences.ui:41 msgid "Font" msgstr "字体" #: src/preferences.ui:53 msgid "Dark mode" msgstr "暗色模式" #: src/preferences.ui:69 msgid "Use system default" msgstr "使用系统默认设置" #: src/preferences.ui:83 msgid "Hex Display" msgstr "十六进制显示" #: src/preferences.ui:87 msgid "Group data as" msgstr "将数据分组为" #: src/preferences.ui:94 msgid "Bytes (8-bit)" msgstr "字节(8 位)" #: src/preferences.ui:100 msgid "Words (16-bit)" msgstr "字(16 位)" #: src/preferences.ui:106 msgid "Longwords (32-bit)" msgstr "长字(32 位)" #: src/preferences.ui:112 msgid "Quadwords (64-bit)" msgstr "四字(64 位)" #: src/preferences.ui:122 msgid "Show offsets column" msgstr "显示偏移值列" #: src/preferences.ui:134 msgid "ASCII Display" msgstr "ASCII 显示" #: src/preferences.ui:137 msgid "Display ASCII control characters" msgstr "显示 ASCII 控制字符" #: src/preferences.ui:147 msgid "Status Bar" msgstr "状态栏" #: src/preferences.ui:151 msgid "Format offset as" msgstr "格式化偏移值为" #: src/preferences.ui:158 msgid "Hexadecimal" msgstr "十六进制" #: src/preferences.ui:188 msgid "Printing" msgstr "打印" #: src/preferences.ui:192 msgid "Fonts" msgstr "字体" #: src/preferences.ui:196 msgid "Data font" msgstr "数据字体" #: src/preferences.ui:207 msgid "Header font" msgstr "页眉字体" #: src/preferences.ui:221 msgid "Shaded rows" msgstr "隔行阴影" #: src/preferences.ui:225 msgid "Print alternating shaded rows" msgstr "打印隔行阴影" #: src/preferences.ui:233 msgid "Span across lines:" msgstr "跨越行:" #: src/print.c:50 #, c-format msgid "Page: %i/%i" msgstr "页面:%i/%i" #: src/replace-dialog.ui:34 msgid "Enter the hex data or ASCII data to replace with" msgstr "输入要替换的十六进制数据或 ASCII 数据" #: src/replace-dialog.ui:37 msgid "Replace With" msgstr "替换为" #: src/replace-dialog.ui:47 msgid "_Replace" msgstr "替换(_R)" #: src/replace-dialog.ui:50 msgid "Replaces the search string with the replace string" msgstr "将搜索字符串替换为替换字符串" #: src/replace-dialog.ui:55 msgid "Replace _All" msgstr "全部替换(_A)" #: src/replace-dialog.ui:58 msgid "Replaces all occurrences of the search string with the replace string" msgstr "将所有的搜索字符串替换为替换字符串" #, c-format #~ msgid "" #~ "Paste failed; invalid hex format.\n" #~ "\n" #~ "The string must be in the format of space-delineated hex byte pairs.\n" #~ "\n" #~ "For example: \"FF 3D 99 0A\"" #~ msgstr "" #~ "粘贴失败;无效十六进制格式。\n" #~ "\n" #~ "字符串必须采用由空格分隔的十六进制字节对格式。\n" #~ "\n" #~ "如:“FF 3D 99 0A”" #~ msgid "Plain text (as space-delimited hex pairs)" #~ msgstr "纯文本(空格分隔十六进制字节对)" #~ msgid "_New" #~ msgstr "新建(_N)" #~ msgid "About GHex" #~ msgstr "关于 GHex" #, fuzzy #~| msgid "_Close" #~ msgid "_Close Anyway" #~ msgstr "关闭(_C)" #~ msgid "Get cursor value" #~ msgstr "获取光标处值" #~ msgid "Find Data" #~ msgstr "查找数据" #~ msgid "Find Next" #~ msgstr "查找下一个" #, c-format #~ msgid "GHex (%s): Find Data: Add search" #~ msgstr "GHex (%s):查找数据:添加搜索" #~ msgid "Add" #~ msgstr "添加" #~ msgid "Search String" #~ msgstr "搜索字符串" #~ msgid "Highlight Colour" #~ msgstr "高亮颜色" #~ msgid "_Add New" #~ msgstr "添加新项(_A)" #~ msgid "_Remove Selected" #~ msgstr "移除选定(_R)" #~ msgid "Closes advanced find window" #~ msgstr "关闭高级查找数据窗口" #, c-format #~ msgid "GHex (%s): Find & Replace Data" #~ msgstr "GHex (%s):查找并替换数据" #~ msgid "Find _next" #~ msgstr "查找下一个(_N)" #~ msgid "Replace Data" #~ msgstr "替换数据" #~ msgid "Find next" #~ msgstr "查找下一个" #~ msgid "Replace All" #~ msgstr "全部替换" #~ msgid "Closes find and replace data window" #~ msgstr "关闭查找和替换数据窗口" #, c-format #~ msgid "GHex (%s): Jump To Byte" #~ msgstr "GHex (%s):转到字节位置" #~ msgid "Enter the byte to jump to" #~ msgstr "输入要转到的字节位置" #~ msgid "OK" #~ msgstr "确定" #~ msgid "There is no active document to search!" #~ msgstr "没有活动文档用于查找!" #~ msgid "There is no string to search for!" #~ msgstr "没有字符串要查找!" #~ msgid "End Of File reached" #~ msgstr "已到文件末尾" #~ msgid "Beginning Of File reached" #~ msgstr "已到文件开头" #~ msgid "There is no active document to move the cursor in!" #~ msgstr "没有可以将光标移入的活动文档!" #~ msgid "There is no active buffer to replace data in!" #~ msgstr "没有可以替换的活动缓冲区!" #~ msgid "End Of File reached!" #~ msgstr "已到文件末尾!" #~ msgid "There is no active document to replace data in!" #~ msgstr "没有可以替换数据的活动文档!" #, c-format #~ msgid "Replaced %d occurrence." #~ msgid_plural "Replaced %d occurrences." #~ msgstr[0] "已替换 %d 匹配项。" #~ msgid "No string to search for!" #~ msgstr "没有要查找的字符串!" #, c-format #~ msgid "" #~ "Can not open URI:\n" #~ "%s" #~ msgstr "" #~ "无法打开URI:\n" #~ "%s" #, c-format #~ msgid "" #~ "Can not open file:\n" #~ "%s" #~ msgstr "" #~ "无法打开文件:\n" #~ "%s" #~ msgid "_View" #~ msgstr "查看(_V)" #~ msgid "_Open..." #~ msgstr "打开(_O)..." #~ msgid "Open a file" #~ msgstr "打开文件" #~ msgid "Save _As..." #~ msgstr "保存为(_A)..." #~ msgid "Save the current file with a different name" #~ msgstr "用另外的文件名保存当前文件" #~ msgid "Save As _HTML..." #~ msgstr "保存为 HTML(_H)..." #~ msgid "Export data to HTML source" #~ msgstr "打出数据为 HTML 源代码" #~ msgid "Revert to a saved version of the file" #~ msgstr "还原为文件的一个保存的版本" #~ msgid "Preview printed data" #~ msgstr "预览打印的数据" #~ msgid "E_xit" #~ msgstr "退出(_X)" #~ msgid "Exit the program" #~ msgstr "退出程序" #~ msgid "Undo the last action" #~ msgstr "撤消上次操作" #~ msgid "Redo the undone action" #~ msgstr "重复被撤消的操作" #~ msgid "Copy selection to clipboard" #~ msgstr "将选中内容复制到剪贴板" #~ msgid "Cut selection" #~ msgstr "剪切选择的内容" #~ msgid "Pa_ste" #~ msgstr "粘贴(_S)" #~ msgid "Paste data from clipboard" #~ msgstr "从剪贴板粘贴数据" #~ msgid "_Find" #~ msgstr "查找(_F)" #~ msgid "Search for a string" #~ msgstr "查找字符串" #~ msgid "_Advanced Find" #~ msgstr "高级查找(_A)" #~ msgid "Advanced Find" #~ msgstr "高级查找" #~ msgid "R_eplace" #~ msgstr "替换(_E)" #~ msgid "Replace a string" #~ msgstr "替换字符串" #~ msgid "_Goto Byte..." #~ msgstr "转到字节(_G)..." #~ msgid "Jump to a certain position" #~ msgstr "跳转到特定位置" #~ msgid "_Add View" #~ msgstr "添加视图(_A)" #~ msgid "Add a new view to the buffer" #~ msgstr "添加缓冲区的新视图" #~ msgid "_Remove View" #~ msgstr "移除视图(_R)" #~ msgid "Remove the current view of the buffer" #~ msgstr "移除缓冲区的当前视图" #~ msgid "_Contents" #~ msgstr "内容(_C)" #~ msgid "Help on this application" #~ msgstr "本程序的帮助" #~ msgid "_About" #~ msgstr "关于(_A)" #~ msgid "About this application" #~ msgstr "关于本程序" #~ msgid "_Insert Mode" #~ msgstr "插入模式(_I)" #~ msgid "Insert/overwrite data" #~ msgstr "插入/覆盖数据" #~ msgid "Show the character table" #~ msgstr "显示字符表" #~ msgid "Open base conversion dialog" #~ msgstr "打开进制转换对话" #~ msgid "Type Conversion _Dialog" #~ msgstr "进制转换对话框(_D)" #~ msgid "Show the type conversion dialog in the edit window" #~ msgstr "在编辑窗口显示类型转换对话框" #~ msgid "Group data by 8 bits" #~ msgstr "将数据按 8 位分组" #~ msgid "_Words" #~ msgstr "字(_W)" #~ msgid "Group data by 16 bits" #~ msgstr "将数据按 16 位分组" #~ msgid "Group data by 32 bits" #~ msgstr "将数据按 32 位分组" #, c-format #~ msgid "; %s bytes from %s to %s selected" #~ msgstr ";从 2$%s 到 3$%s 的 1$%s 字节已选定" #, c-format #~ msgid "Activate file %s" #~ msgstr "激活文件 %s" #, c-format #~ msgid "%s - GHex" #~ msgstr "%s - GHex" #, c-format #~ msgid "" #~ "File %s exists.\n" #~ "Do you want to overwrite it?" #~ msgstr "" #~ "文件 %s 已存在。\n" #~ "您要覆盖它吗?" #, c-format #~ msgid "Saved buffer to file %s" #~ msgstr "保存缓冲区到文件 %s" #, c-format #~ msgid "" #~ "File %s has changed since last save.\n" #~ "Do you want to save changes?" #~ msgstr "" #~ "文件 %s 自上次保存后已被修改。\n" #~ "您要保存改动吗?" #~ msgid "Do_n't save" #~ msgstr "不保存(_N)" #~ msgid "You don't have the permissions to save the file!" #~ msgstr "您没有权限保存文件!" #~ msgid "FIXME: no conversion function" #~ msgstr "修正错误:没有转换函数" #~ msgid "Saving to HTML..." #~ msgstr "正保存到 HTML..." #~ msgid "X geometry specification (see \"X\" man page)." #~ msgstr "X 几何属性 (见“X”的手册页)。" #~ msgid "GEOMETRY" #~ msgstr "几何属性" #~ msgid "FILES" #~ msgstr "文件" #~ msgid "- GTK+ binary editor" #~ msgstr "- GTK+ 二进制文件编辑器" #, c-format #~ msgid "" #~ "%s\n" #~ "Run '%s --help' to see a full list of available command line options.\n" #~ msgstr "" #~ "%s\n" #~ "运行 '%s --help' 来查看所有可用的命令行参数。\n" #, c-format #~ msgid "Invalid geometry string \"%s\"\n" #~ msgstr "无效的几何属性字符串“%s”\n" #~ msgid "GHex Preferences" #~ msgstr "GHex 首选项" #~ msgid "_Maximum number of undo levels:" #~ msgstr "最大撤消次数(_M):" #~ msgid "Undo levels" #~ msgstr "撤消次数" #~ msgid "Select maximum number of undo levels" #~ msgstr "选择最大撤消次数" #~ msgid "_Show cursor offset in statusbar as:" #~ msgstr "在状态栏中显示光标偏移值为(_S):" #~ msgid "Custom" #~ msgstr "定制" #~ msgid "Enter the cursor offset format" #~ msgstr "输入光标偏移值格式" #~ msgid "Select the cursor offset format" #~ msgstr "选择光标偏移值格式" #~ msgid "Editing" #~ msgstr "编辑" #~ msgid "Default Group Type" #~ msgstr "默认分组类型" #~ msgid "Paper size" #~ msgstr "纸张大小" #~ msgid "_Data font:" #~ msgstr "数据字体(_D):" #~ msgid "Select the data font" #~ msgstr "选择数据字体" #~ msgid "Header fo_nt:" #~ msgstr "页眉字体(_N):" #~ msgid "Select the header font" #~ msgstr "选择页眉字体" #~ msgid "_Print shaded box over:" #~ msgstr "打印阴影框(_P):" #~ msgid "Box size" #~ msgstr "边框大小" #~ msgid "Select size of box (in number of lines)" #~ msgstr "选择边框大小(线宽)" #~ msgid "lines (0 for no box)" #~ msgstr "线宽(0 表示没有边框)" #~ msgid "Can not open desired font!" #~ msgstr "无法打开需要的字体!" #~ msgid "" #~ "The offset format string contains invalid format specifier.\n" #~ "Only 'x', 'X', 'p', 'P', 'd' and 'o' are allowed." #~ msgstr "" #~ "偏移格式串保护无效的格式符。\n" #~ "只允许使用“x”、“X”、“p”、“P”、“d”和“o”。" #~ msgid "hex data" #~ msgstr "十六进制数据" #~ msgid "ASCII data" #~ msgstr "ASCII 数据" #~ msgid "A binary file editor" #~ msgstr "二进制文件编辑器" #~ msgid "GHex Website" #~ msgstr "GHex 网站" #, c-format #~ msgid "Loaded file %s" #~ msgstr "载入文件 %s" #~ msgid "Can not open file!" #~ msgstr "无法打开文件!" #~ msgid "Select path and file name for the HTML source" #~ msgstr "选择 HTML 源码文件的路径和文件名" #~ msgid "You need to specify a base name for the HTML files." #~ msgstr "您要为生成的 HTML 文件指定一个基本名。" #~ msgid "You don't have the permission to write to the selected path.\n" #~ msgstr "您没有写入选中路径的权限。\n" #~ msgid "" #~ "Saving to HTML will overwrite some files.\n" #~ "Do you want to proceed?" #~ msgstr "" #~ "保存到 HTML 将覆盖一些文件。\n" #~ "您要继续吗?" #, c-format #~ msgid "Really revert file %s?" #~ msgstr "真的要恢复文件 %s?" #, c-format #~ msgid "Reverted buffer from file %s" #~ msgstr "从文件 %s 中恢复了缓冲区" #~ msgid "Hexadecimal Editor" #~ msgstr "十六进制编辑器" #~ msgid "Add View" #~ msgstr "添加视图" #~ msgid "Bytes" #~ msgstr "字节" #~ msgid "Character Table..." #~ msgstr "字符表..." #~ msgid "Contents" #~ msgstr "内容" #~ msgid "Converter..." #~ msgstr "转换程序..." #~ msgid "Exit" #~ msgstr "退出" #~ msgid "Export to HTML..." #~ msgstr "导出为HTML..." #~ msgid "Goto Byte" #~ msgstr "转到字节" #~ msgid "Help Chat" #~ msgstr "帮助(在线聊天)" #~ msgid "Print" #~ msgstr "打印" #~ msgid "Print Preview..." #~ msgstr "打印预览..." #~ msgid "Remove View" #~ msgstr "移除视图" #~ msgid "Revert" #~ msgstr "还原" #~ msgid "Save" #~ msgstr "保存" #~ msgid "Type Conversion Dialog..." #~ msgstr "进制转换对话框..." #~ msgid "Words" #~ msgstr "字" #~ msgid "_Insert a new preview phrase." #~ msgstr "插入新的预览语句(_L)。" #~ msgid "Modify preview phrase..." #~ msgstr "更改预览语句..." #~ msgid "Preview" #~ msgstr "预览" #~ msgid "_Modify preview phrase..." #~ msgstr "更改预览语句(_M)..." #~ msgid "Font Selection" #~ msgstr "字体选择" #~ msgid "Sans Regular 12" #~ msgstr "Sans 常规 12" #~ msgid "AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz" #~ msgstr "AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz" #~ msgid "Pick a Font" #~ msgstr "选取字体" #~ msgid "The title of the selection dialog box" #~ msgstr "选择对话框的标题" #~ msgid "Font name" #~ msgstr "字体名称" #~ msgid "Name of the selected font" #~ msgstr "选定字体的名称" #~ msgid "Preview text" #~ msgstr "预览文本" #~ msgid "Preview text shown in the dialog" #~ msgstr "预览显示于对话框中的文本" #~ msgid "Use font in label" #~ msgstr "在标签中使用字体" #~ msgid "Use font in the label in font info mode" #~ msgstr "在字体信息模式下在标签中使用字体" #~ msgid "Font size for label" #~ msgstr "标签的字体大小" #~ msgid "Font size for label in font info mode" #~ msgstr "字体信息模式下的标签字体大小" #~ msgid "Show size in font info mode" #~ msgstr "字体信息模式下显示大小" #~ msgid "32 bit float:" #~ msgstr "32 位浮点数:" #~ msgid "64 bit float:" #~ msgstr "64 位浮点数:" #~ msgid "Could not initialize Bonobo!\n" #~ msgstr "无法初始化 Bonobo!\n" #~ msgid "" #~ "GHex could not find the font \"%s\".\n" #~ "GHex is unable to print without this font installed." #~ msgstr "" #~ "GHex 无法找到字体“%s”。\n" #~ "没有该字体,GHex 无法打印。" #~ msgid "" #~ "Copyright © 1998 - 2006 Jaka Močnik\n" #~ "Copyright © 2006 - 2010 GHex Contributors" #~ msgstr "" #~ "版权 © 1998 - 2006 Jaka Močnik\n" #~ "版权 © 2006 - 2010 GHex Contributors" #~ msgid "Printing file..." #~ msgstr "打印文件..." #~ msgid "Print Hex Document" #~ msgstr "打印十六进制文档" #~ msgid "Pages" #~ msgstr "页" #~ msgid "GHex (%s): Print Preview" #~ msgstr "GHex (%s):打印预览" #~ msgid "The gnome binary editor" #~ msgstr "GNOME 二进制编辑器" #~ msgid "Released under the terms of GNU Public License" #~ msgstr "按 GNU 公共授权方式发布"