msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2007-08-08 11:36-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: C/ghex2.xml:27(year) msgid "2002" msgstr "" #: C/ghex2.xml:31(year) msgid "1998" msgstr "" #: C/ghex2.xml:32(year) msgid "1999" msgstr "" #: C/ghex2.xml:34(holder) msgid "Jaka Mocnik" msgstr "" #: C/ghex2.xml:54(firstname) msgid "Sun" msgstr "" #: C/ghex2.xml:55(surname) msgid "GNOME Documentation Team" msgstr "GNOME 文件小組" #: C/ghex2.xml:58(email) msgid "gdocteam@sun.com" msgstr "" #: C/ghex2.xml:62(firstname) msgid "Jaka" msgstr "" #: C/ghex2.xml:63(surname) msgid "Mocnik" msgstr "" #: C/ghex2.xml:66(email) msgid "jaka@gnu.org" msgstr "" #: C/ghex2.xml:95(revnumber) msgid "GHex Manual V2.2" msgstr "GHex 手冊 V2.2" #: C/ghex2.xml:96(date) msgid "August 2002" msgstr "2002 年 8 月" #: C/ghex2.xml:105(revnumber) msgid "GHex Manual V2.1" msgstr "GHex 手冊 V2.1" #: C/ghex2.xml:106(date) msgid "July 2002" msgstr "2002 年 7 月" #: C/ghex2.xml:115(revnumber) msgid "GHex Manual V2.0" msgstr "GHex 手冊 V2.0" #: C/ghex2.xml:116(date) msgid "March 2002" msgstr "2002 年 3 月" #: C/ghex2.xml:125(revnumber) msgid "GHex Manual V1.0" msgstr "GHex 手冊 V1.0" #: C/ghex2.xml:128(para) msgid "Jaka Mocnik jaka@gnu.org" msgstr "" #: C/ghex2.xml:136(releaseinfo) msgid "This manual describes version 1.99.0.1 of GHex." msgstr "本手冊的內容是說明 1.99.0.1 版的 GHex。" #: C/ghex2.xml:139(title) msgid "Feedback" msgstr "回饋" #: C/ghex2.xml:140(para) msgid "" "To report a bug or make a suggestion regarding the GHex application or this " "manual, follow the directions in the GNOME Feedback Page." msgstr "" "關於 GHex 應用程式或本手冊,如果要報告錯誤或提出建議,請遵照 GNOME Feedback Page 的指示。" #: C/ghex2.xml:150(primary) msgid "GHex" msgstr "" #: C/ghex2.xml:159(title) msgid "Introduction" msgstr "介紹" #: C/ghex2.xml:160(para) msgid "" "The GHex application enables you to perform the " "following actions:" msgstr "您可以使用 GHex 應用程式,執行下列動作:" #: C/ghex2.xml:162(para) msgid "View a file in ASCII or hexadecimal format simultaneously." msgstr "同時以 ASCII 或十六進制格式檢視檔案。" #: C/ghex2.xml:164(para) msgid "Edit a file in either ASCII or hexadecimal format." msgstr "以 ASCII 或十六進制格式編輯檔案。" #: C/ghex2.xml:172(title) msgid "Getting Started" msgstr "入門" #: C/ghex2.xml:177(title) msgid "To Start GHex" msgstr "啟動GHex" #: C/ghex2.xml:179(para) msgid "You can start GHex in the following ways:" msgstr "您可以使用下列方式啟動 GHex:" #: C/ghex2.xml:182(term) msgid "Applications menu" msgstr "應用程式功能表" #: C/ghex2.xml:184(para) msgid "" "Choose AccessoriesHex " "Editor." msgstr "" "請選擇周邊裝置十六進位編輯" "器。" #: C/ghex2.xml:192(term) msgid "Command line" msgstr "指令行" #: C/ghex2.xml:194(para) msgid "" "You can open a single file or multiple files when you run GHex from a command line. To open multiple files from a command " "line, type the following command, then press Return:" msgstr "" "當您從指令行執行 GHex 時,您可以開啟單一個檔案,也" "可以開啟多個檔案。 如果要從指令行開啟多個檔案,請輸入下面的指令,然後按一下 " "Return 鍵:" #: C/ghex2.xml:195(command) msgid "ghex2" msgstr "" #: C/ghex2.xml:195(replaceable) msgid "file1.txt" msgstr "" #: C/ghex2.xml:195(replaceable) msgid "file2.txt" msgstr "" #: C/ghex2.xml:196(para) msgid "" "where file1.txt and file2.txt are the names of the files you want to open." msgstr "" "其中,file1.txt 以及 file2.txt 是您想要開啟的檔案名稱。" #: C/ghex2.xml:203(title) msgid "When You Start GHex" msgstr "當您啟動 GHex" #: C/ghex2.xml:205(para) msgid "" "When you start GHex, the following window is " "displayed." msgstr "當您啟動 GHex 時,會出現如下面所列的視窗。" #: C/ghex2.xml:209(title) msgid "GHex Window Before You Open a File" msgstr "開啟檔案前的 GHex 視窗" #: C/ghex2.xml:216(phrase) msgid "Shows GHex main window before you open a file." msgstr "顯示開啟檔案前的 GHex 主視窗。" #: C/ghex2.xml:229(title) msgid "To Open a File" msgstr "開啟檔案" #: C/ghex2.xml:230(para) msgid "" "To open a file, choose FileOpen. Select the file that you want to open, then click " "OK. You can open multiple files in GHex. GHex displays each file in a new " "window." msgstr "" "如果要開啟檔案,請選擇檔案開啟。請選取要開啟的檔案,然後按一下確定。您可以在 GHex 中開啟多個檔案。 " "GHex 會將每個檔案分別顯示在新視窗中。" #: C/ghex2.xml:234(para) msgid "" "When you open a file in GHex, the application " "displays the file in the following window." msgstr "" "在 GHex 中開啟檔案時,本應用程式會在下面的視窗中顯" "示檔案。" #: C/ghex2.xml:238(title) msgid "GHex Window with an Open File" msgstr "含有開啟檔案的 GHex 視窗" #: C/ghex2.xml:245(phrase) msgid "Shows GHex main window with an open file" msgstr "顯示含有開啟檔案的 GHex 主視窗" #: C/ghex2.xml:252(para) msgid "" "The GHex window contains the following elements:" msgstr "GHex 視窗中包含下列元素:" #: C/ghex2.xml:255(term) msgid "Menubar" msgstr "功能表列" #: C/ghex2.xml:257(para) msgid "" "The menus on the menubar contain all the commands that you need to work with " "files in GHex." msgstr "" "功能表列上的功能表,有在 GHex 中使用檔案時,所需要" "的所有指令。" #: C/ghex2.xml:261(term) msgid "Cursor offsets column" msgstr "游標偏移欄位" #: C/ghex2.xml:263(para) msgid "" "The cursor offset is the distance between the beginning of the file and the " "first byte in each line. By default, GHex " "displays the cursor offsets column to the left of the hexadecimal view." msgstr "" "游標偏移量是指檔案開頭與各行第一個位元組之間的距離。 依預設值," "GHex 會在十六進制檢視的左邊,顯示游標偏移量欄位。" #: C/ghex2.xml:268(term) msgid "Display pane on left side" msgstr "左邊的顯示窗格" #: C/ghex2.xml:270(para) msgid "" "The display pane on the left side of the display area displays a hexadecimal " "view of the file." msgstr "顯示區域左邊的顯示窗格,會以十六進制顯示檔案。" #: C/ghex2.xml:274(term) msgid "Display pane on right side" msgstr "右邊的顯示窗格" #: C/ghex2.xml:276(para) msgid "" "The display pane on the right side of the display area displays an ASCII " "view of the file." msgstr "顯示區域右邊的顯示窗格,會以 ASCII 制顯示檔案。" #: C/ghex2.xml:286(title) msgid "Usage" msgstr "使用" #: C/ghex2.xml:291(title) msgid "To Edit a File" msgstr "編輯檔案" #: C/ghex2.xml:292(para) msgid "To edit a file, perform the following steps:" msgstr "如果要編輯檔案,請執行下列步驟:" #: C/ghex2.xml:294(para) msgid "" "Click in the hexadecimal or ASCII view of the file. The view in which the " "cursor is active displays a full cursor. The view in which the cursor is not " "active displays an outline of the cursor." msgstr "" "請按一下檔案的十六進位或 ASCII 檢視。 檢視若為作用中,則會顯示完整的游標。 檢" "視若為非作用中,則只會顯示游標的外框。" #: C/ghex2.xml:296(para) msgid "Use any of the following methods to move the cursor around the file:" msgstr "請使用下列任一種方法,在檔案中移動游標:" #: C/ghex2.xml:298(para) msgid "" "Scroll through the file using the scrollbar on the window or the arrow keys " "on the keyboard." msgstr "使用視窗中的捲動軸捲動檔案,或是使用鍵盤的箭頭鍵。" #: C/ghex2.xml:300(para) msgid "" "Choose EditGoto Byte, type the cursor offset as a decimal or " "hexadecimal value, then click OK. The format of the " "hexadecimal value must be 0x followed by the offset, for example 0x3." msgstr "" "請選擇編輯到位元,以十進制或十六進制鍵入游標偏移量,然後按一下確定。十六進制數值的格式,必須為 0x 加上偏移量,例如 0x3。" #: C/ghex2.xml:307(para) msgid "" "Edit the ASCII format in the same way you edit a normal text file. Edit the " "hexadecimal format using the values 0 to 9 and a to f." msgstr "" "請使用一般編輯文字檔的方式,編輯 ASCII 格式。 請使用 0 到 9 以及 a 到 f 的數" "值,編輯十六進制格式。" #: C/ghex2.xml:310(para) msgid "" "To insert data without overwriting existing data, choose " "EditInsert Mode." msgstr "" "如果要插入資料但不覆寫現有的資料,請選擇編輯插入模式。" #: C/ghex2.xml:319(title) msgid "To Save a File" msgstr "儲存檔案" #: C/ghex2.xml:320(para) msgid "You can save a file in the following ways:" msgstr "您可以使用下列方式儲存檔案:" #: C/ghex2.xml:322(para) msgid "" "To save changes to the current file, choose FileSave." msgstr "" "如果要將變更儲存至目前的檔案,請選擇檔案儲存。" #: C/ghex2.xml:327(para) msgid "" "To save the current file under a new filename, choose " "FileSave As. Enter a name for the file in the Select a file to " "save buffer as dialog, then click OK." msgstr "" "如果要用新的檔名儲存目前的檔案,請選擇檔案另存新檔。請在選擇" "檔案儲存緩衝區對話方塊中,輸入檔案的名稱,然後按一下確" "定。" #: C/ghex2.xml:338(title) msgid "To Find Data in a File" msgstr "在檔案中尋找資料" #: C/ghex2.xml:339(para) msgid "" "To search a file for a hexadecimal or ASCII string, perform the following " "steps:" msgstr "如果要在檔案中搜尋十六進制或 ASCII 字串,請執行下列步驟:" #: C/ghex2.xml:341(para) msgid "" "Choose EditFind." msgstr "" "請選擇 編輯尋找。" #: C/ghex2.xml:346(para) msgid "" "In the Find Data dialog, choose one of the following " "options:" msgstr "在尋找資料對話方塊中,選擇下列任一項選項:" #: C/ghex2.xml:348(guilabel) msgid "Search for hex data" msgstr "搜尋十六進位資料" #: C/ghex2.xml:350(guilabel) msgid "Search for ASCII data" msgstr "搜尋 ASCII 資料" #: C/ghex2.xml:354(para) msgid "Type the string that you want to find." msgstr "請輸入您想要尋找的字串。" #: C/ghex2.xml:356(para) msgid "" "Click Find Next to find the next occurrence of the " "string." msgstr "按一下尋找下一個,尋找下一個符合的字串。" #: C/ghex2.xml:358(para) msgid "" "Click Find Previous to find the previous occurrence " "of the string." msgstr "按一下尋找上一個,尋找上一個符合的字串。" #: C/ghex2.xml:367(title) msgid "To Find and Replace Data in a File" msgstr "在檔案中尋找並取代資料" #: C/ghex2.xml:368(para) msgid "" "To search a file for a hexadecimal or ASCII string and then replace the " "string, perform the following steps:" msgstr "" "如果要先在檔案中搜尋十六進制或 ASCII 字串,然後取代該字串,請執行下列步驟:" #: C/ghex2.xml:370(para) msgid "" "Choose EditReplace." msgstr "" "請選擇編輯取代。" #: C/ghex2.xml:375(para) msgid "" "In the Find & Replace Data dialog, choose one of " "the following options:" msgstr "" "在尋找 & 取代資料對話方塊中,選擇下列任一項選項:" #: C/ghex2.xml:377(guilabel) msgid "Replace hex data" msgstr "取代十六進位資料" #: C/ghex2.xml:379(guilabel) msgid "Replace ASCII data" msgstr "取代 ASCII 資料" #: C/ghex2.xml:383(para) msgid "In the first text box, type the string that you want to find." msgstr "請在第一個文字方塊中,輸入您想要尋找的字串。" #: C/ghex2.xml:385(para) msgid "" "In the second text box, type the string that you want to use to replace the " "string that you find." msgstr "請在第二個文字方塊中,輸入您想要取代所尋找字串的字串。" #: C/ghex2.xml:387(para) msgid "Click Find Next." msgstr "請按一下尋找下一個。" #: C/ghex2.xml:389(para) msgid "" "Click Replace to replace the current occurrence of " "the string or click Replace All to replace all " "occurrences of the string." msgstr "" "請按一下取代,取代目前所在位置的字串;或是按一下" "全部取代,取代所有該字串。" #: C/ghex2.xml:397(title) msgid "To Add or Remove Additional Views of a File" msgstr "新增或移除檔案的其他檢視" #: C/ghex2.xml:398(para) msgid "" "To add another view of the current file to your GHex window or to the desktop, choose ViewAdd View." msgstr "" "如果要將現有檔案的其他檢視新增到 GHex 視窗或桌面," "請選擇檢視新增檢視。" #: C/ghex2.xml:402(para) msgid "" "To remove a view of the current file, choose ViewRemove View. If you remove " "the last view that is open, the application exits." msgstr "" "如果要移除目前檔案的檢視,請選擇檢視移除檢視。如果您移除的是最後" "一個開啟的檔案,本應用程式便會結束。" #: C/ghex2.xml:411(title) msgid "To Export the GHex Display to HTML" msgstr "匯出 GHex 檢視至 HTML" #: C/ghex2.xml:416(para) msgid "" "Creates a separate HTML file for each page of data that is displayed in the " "GHex window." msgstr "" "替 GHex 視窗中顯示的各個資料頁,分別建立不同的 " "HTML 檔案。" #: C/ghex2.xml:418(para) msgid "Uses the HTML filename that you specify as the basis for the filename." msgstr "使用所指定的 HTML 檔案名稱,作為檔名的基礎。" #: C/ghex2.xml:420(para) msgid "Appends a page number to the filename to differentiate the files." msgstr "在檔案名稱中附加頁數,以區別檔案。" #: C/ghex2.xml:412(para) msgid "" "To export the data contained in the GHex window " "to HTML, choose FileSave As " "HTML. Choose a directory and specify a filename " "for the HTML file, then click OK. GHex implements the following actions: For example, " "if you specify the filename log.html, " "GHex creates a series of HTML files named " "log00000000.html, log00000001.html, log00000002.html, and so on." msgstr "" "如果要將 GHex 視窗中的資料匯出至 HTML,請選擇" "檔案儲存為 HTML。請選擇目錄,並為 HTML 檔案指定檔案名稱,然後按一下確" "定。 GHex 會執行下列動作:" " 例如,如果您指定的檔案名稱是 log.html," "GHex 便會建立一系列名稱為 log00000000." "html、log00000001.html、" "log00000002.html 等等的 HTML 檔案。" #: C/ghex2.xml:428(title) msgid "To View a Character Table" msgstr "檢視字元表" #: C/ghex2.xml:429(para) msgid "" "To view a table that contains the ASCII, hexadecimal, decimal, octal, and " "binary representations for the values 0 to 255, choose " "WindowsCharacter Table." msgstr "" "如果要檢視以 ASCII、十六進位、十進位、八進位及二進位表示法表示 0 到 255 數值" "的表格,請選擇視窗字元表。" #: C/ghex2.xml:438(title) msgid "To View Data Conversions" msgstr "檢視資料轉換" #: C/ghex2.xml:439(para) msgid "" "To display the binary, decimal, hexadecimal, and ASCII conversions for up to " "four bytes of data, perform the following steps:" msgstr "" "如果要顯示最多四個位元組資料的二進制、十進制、十六進制以及 ASCII 轉換,請執行" "下列步驟:" #: C/ghex2.xml:441(para) msgid "" "Choose WindowsBase Converter." msgstr "" "請選擇視窗基數轉換程式。" #: C/ghex2.xml:446(para) msgid "Perform one of the following actions:" msgstr "執行下列任一項動作:" #: C/ghex2.xml:448(para) msgid "" "Type the data that you want to convert in one of the fields in the " "Base Converter dialog, then press Return." msgstr "" "請在基數轉換程式對話方塊的其中一個欄位,鍵入要轉換的資" "料,然後按一下 Return。" #: C/ghex2.xml:451(para) msgid "" "To display the conversions for the data at the cursor position in the " "current file, click on the Get cursor value button." msgstr "" "如果要在目前檔案的游標位置顯示資料轉換,請按一下取得游標值按鈕。" #: C/ghex2.xml:455(para) msgid "" "GHex updates the values of the other fields to " "display the data conversions." msgstr "GHex 會更新其他欄位的數值,顯示資料轉換。" #: C/ghex2.xml:464(title) msgid "To Print a File" msgstr "列印檔案" #: C/ghex2.xml:465(para) msgid "" "To print a file, choose FilePrint. Select the print " "options that you require in the Print dialog, then " "click OK." msgstr "" "如果要列印檔案,請選擇檔案列印。請在列印對話方塊中,選取所需" "的列印選項,然後按一下確定。" #: C/ghex2.xml:469(para) msgid "" "To preview a printed copy of the file, choose FilePrint Preview." msgstr "" "如果要預覽列印檔案的副本,請選擇檔案列印預視。" #: C/ghex2.xml:481(title) msgid "Preferences" msgstr "個人喜好" #: C/ghex2.xml:482(para) msgid "" "To configure GHex, choose " "EditPreferences. The Preferences dialog contains the " "following tabbed sections:" msgstr "" "如果要配置 GHex,請選擇編輯個人喜好。在個人喜" "好對話方塊中,含有下列標籤區段:" #: C/ghex2.xml:498(title) msgid "Editing" msgstr "編輯" #: C/ghex2.xml:501(guilabel) msgid "Maximum number of undo levels" msgstr "還原等級的最大值" #: C/ghex2.xml:503(para) msgid "" "Use this spin box to specify the maximum number of edits that you can undo " "using the Undo menu item on the Edit menu." msgstr "" "請使用這個旋轉方塊,指定使用還原功能表項目時,可以" "還原編輯的最大數值 (旋轉方塊位於編輯功能表上)。" #: C/ghex2.xml:509(guilabel) msgid "Show cursor offset in statusbar as" msgstr "狀態列中顯示游標偏移量的方式" #: C/ghex2.xml:511(para) msgid "" "Use this drop-down list box to select the format in which the cursor offset " "is displayed. The format can be decimal, hexadecimal, or a custom print " "style string that only contains the format specifiers x, o, and s." msgstr "" "請使用這個下拉式清單方塊,選取顯示游標偏移量的格式。 格式可以是十進制、十六進" "制,或是自訂的列印樣式字串,這些字串只能有 x、o 與 s 等格式限定符號。" #: C/ghex2.xml:517(guilabel) msgid "Show offsets column" msgstr "顯示偏移量欄位" #: C/ghex2.xml:519(para) msgid "" "Select this option to display the cursor offsets in a column to the left of " "the hexadecimal view of the GHex window." msgstr "" "選取這個選項,可以在 GHex 視窗十六進制檢視的左邊欄" "位中,顯示游標偏移量。" #: C/ghex2.xml:530(title) msgid "Display" msgstr "顯示" #: C/ghex2.xml:533(guilabel) msgid "Font" msgstr "字型" #: C/ghex2.xml:535(para) msgid "" "Click on this button to display the font selector dialog. Use the font " "selector dialog to edit the existing font information or type new font " "information. Specify a font type, style, and size for displaying the " "contents of files in GHex, then click " "OK. The font information that you specify is " "displayed on the Font button." msgstr "" "請按一下這個按鈕,顯示字型選擇器對話方塊。 請使用字型選擇器對話方塊,編輯現有" "的字型資訊,或是鍵入新的字型資訊。 請指定在 GHex " "中顯示檔案內容時,所要使用的字型類型、樣式及大小,然後按一下確定。您所指定的字型資訊,會顯示在字型按鈕上。" #: C/ghex2.xml:541(guilabel) msgid "Default Group Type" msgstr "預設群組類型" #: C/ghex2.xml:543(para) msgid "" "Select how the application displays the hexadecimal content of a file in the " "GHex window. The options are as follows:" msgstr "" "請選取選項,以指定應用程式在 GHex 視窗中,要如何顯" "示檔案的十六進制內容。 選項如下:" #: C/ghex2.xml:545(para) msgid "Bytes - single bytes." msgstr "位元組 - 單一位元組。" #: C/ghex2.xml:547(para) msgid "Words - groups of two bytes." msgstr "字 - 二個位元組的群組。" #: C/ghex2.xml:549(para) msgid "Longwords - groups of four bytes." msgstr "長字 - 四個位元組的群組。" #: C/ghex2.xml:563(title) msgid "Printing" msgstr "列印" #: C/ghex2.xml:566(guilabel) msgid "Data font" msgstr "資料字型" #: C/ghex2.xml:568(para) msgid "" "Click on the Data font button to specify the size of " "the font to use to print the data contained in a file." msgstr "" "請按一下資料字型按鈕,指定列印檔案資料時,所要使用的字" "型大小。" #: C/ghex2.xml:574(guilabel) msgid "Header font" msgstr "標頭字型" #: C/ghex2.xml:576(para) msgid "" "Click on the Header font button to specify the size " "of the font to use to print the header information that is contained in the " "file." msgstr "" "請按一下標頭字型按鈕,指定列印檔案的標頭資訊時,所要使" "用的字型大小。" #: C/ghex2.xml:582(guilabel) msgid "Print shaded box over" msgstr "列印灰色方塊" #: C/ghex2.xml:584(para) msgid "" "Use this spin box to specify the number of lines that GHex prints with a surrounding shaded box. If the value of the spin " "box is 10, GHex prints the first 10 lines of the " "file within a shaded box." msgstr "" "請使用這個旋轉方塊,指定 GHex 列印灰色方塊時,方塊" "中所含的行數。如果旋轉方塊的數值為 10,GHex 便會在" "灰色方塊中,列印檔案最前面的 10 行。" #: C/legal.xml:2(para) msgid "" "Permission is granted to copy, distribute and/or modify this document under " "the terms of the GNU Free Documentation License (GFDL), Version 1.1 or any " "later version published by the Free Software Foundation with no Invariant " "Sections, no Front-Cover Texts, and no Back-Cover Texts. You can find a copy " "of the GFDL at this link or " "in the file COPYING-DOCS distributed with this manual." msgstr "" "根據自由軟體基金會 (Free Software Foundation) 所發佈 的 GNU 自由文件授權 " "(GNU Free Documentation License, GFDL) 1.1 (含) 以後版本, 使用者可以複製、散" "佈,或修改本文件,但不得增刪章節,不得加上封面文字, 亦不得加上封底文字。 如" "要取得 GFDL 的副本,請參閱 此連結,或是參閱與本手冊一同隨附的 COPYING-DOCS 檔案。" #: C/legal.xml:12(para) msgid "" "This manual is part of a collection of GNOME manuals distributed under the " "GFDL. If you want to distribute this manual separately from the collection, " "you can do so by adding a copy of the license to the manual, as described in " "section 6 of the license." msgstr "" "本手冊是屬於依 GFDL 授權所發佈之 GNOME 手冊集中的一部份。 如果您只要單獨散佈" "本手冊,依據授權聲明第六節之敘述, 您必須另外將授權聲明加入本手冊中。" #: C/legal.xml:19(para) msgid "" "Many of the names used by companies to distinguish their products and " "services are claimed as trademarks. Where those names appear in any GNOME " "documentation, and the members of the GNOME Documentation Project are made " "aware of those trademarks, then the names are in capital letters or initial " "capital letters." msgstr "" "許多公司為了突顯其產品與服務,會使用特別名稱,並亦已聲明這些 名稱為其商標。當" "這些名稱出現在 GNOME 文件中,同時 GNOME 文件 專案小組成員亦明白這些名稱為商標" "時, 這些名稱會以大寫字母或是首字母大寫表示。" #: C/legal.xml:35(para) msgid "" "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, " "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT " "THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS " "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE " "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR " "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR " "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL " "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY " "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN " "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION " "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" "文件提供是以其「原樣」呈現,不管明示或暗示,皆不具任何 保證,包括 (但不限於) " "文件或修正版毫無錯誤、可販售、 具特殊用途,或不侵權。 關於本文件與修正版文件" "之品質、正確性及功用, 其風險您必須自行承擔。 若本文件或修正版有任何缺陷,任" "何必須之保養,修理及更正, 應由您自行承擔,原始作者、作者或任何散佈者無須負" "責。 本免責聲明是本授權聲明極重要與必要的一部份,因此任何文件或 修正版的授" "權,皆須在同意本免責聲明的情況下進行;同時" #: C/legal.xml:55(para) msgid "" "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT (INCLUDING " "NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL WRITER, ANY " "CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION OF THE " "DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON " "FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF " "ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, " "WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER DAMAGES " "OR LOSSES ARISING OUT OF OR RELATING TO USE OF THE DOCUMENT AND MODIFIED " "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE " "POSSIBILITY OF SUCH DAMAGES." msgstr "" "在任何情況或法律理論下,亦即不管是在侵權 (包括疏忽)、契約或 其他情形,或是已" "預先告知會有下列損害之可能時,本文件 或修正版的任何作者、原始作者、投稿人以及" "散佈者,或是 任何提供單位,對於因使用本文件及修正版,或與本文件及 修正版使用" "相關所造成的任何直接、間接、特殊、偶然或必 然之損害,包括 (但不限於) 信譽受" "損、工作停止、電腦當 機或不正常運作,或任何所有其他損害,上述人等皆不需負 任" "何責任。" #: C/legal.xml:28(para) msgid "" "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE TERMS " "OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER UNDERSTANDING THAT: " "" msgstr "" "本文件及其修正版本的提供,是基於 GNU 自由文件授權聲明 的條款,同時亦有下列共" "識: " #: C/ghex2-C.omf:10(title) msgid "GHex Manual V2.5" msgstr "GHex" #: C/ghex2-C.omf:13(date) msgid "2004-03-04" msgstr "2002-08-28" #: C/ghex2-C.omf:18(description) msgid "User manual for GHex." msgstr "GHex 使用者手冊。" #: C/ghex2-C.omf:21(type) msgid "user's guide" msgstr ""