.. role:: switch(samp) .. |rightarrow| unicode:: 0x2192 .. _GNAT_Utility_Programs: ********************* GNAT Utility Programs ********************* This chapter describes a number of utility programs: .. only:: PRO or GPL * :ref:`The_File_Cleanup_Utility_gnatclean` * :ref:`The_GNAT_Library_Browser_gnatls` * :ref:`The_GNAT_Pretty_Printer_gnatpp` * :ref:`The_Body_Stub_Generator_gnatstub` * :ref:`The_Backtrace_Symbolizer_gnatsymbolize` It also describes how you can use several of these tools in conjunction with project files: :ref:`Using_Project_Files_with_GNAT_Tools` .. only:: FSF * :ref:`The_File_Cleanup_Utility_gnatclean` * :ref:`The_GNAT_Library_Browser_gnatls` Other GNAT utilities are described elsewhere in this manual: * :ref:`Handling_Arbitrary_File_Naming_Conventions_with_gnatname` * :ref:`File_Name_Krunching_with_gnatkr` * :ref:`Renaming_Files_with_gnatchop` * :ref:`Preprocessing_with_gnatprep` .. _The_File_Cleanup_Utility_gnatclean: The File Cleanup Utility ``gnatclean`` ====================================== .. index:: File cleanup tool .. index:: gnatclean ``gnatclean`` is a tool that deletes some files produced by the compiler, binder and linker, including ALI files, object files, tree files, expanded source files, library files, interface copy source files, binder generated files and executable files. .. _Running_gnatclean: Running ``gnatclean`` --------------------- You run the ``gnatclean`` command as follow: :: $ gnatclean switches names where ``names`` is a list of source file names. You may omit suffixes :file:`.ads` and :file:`adb`. If a project file is specified using switch :switch:`-P`, then you may completely omit ``names``. In normal mode, ``gnatclean`` deletes the files produced by the compiler and, if switch :switch:`-c` is not specified, produced by the binder and linker. In information-only mode, specified by switch :switch:`-n`, ``gnatclean`` lists the files that would have been deleted in normal mode, but doesn't actually delete any files. .. _Switches_for_gnatclean: Switches for ``gnatclean`` -------------------------- ``gnatclean`` recognizes the following switches: .. index:: --version (gnatclean) :switch:`--version` Display copyright and version, then exit, disregarding all other options. .. index:: --help (gnatclean) :switch:`--help` If :switch:`--version` was not specified, display usage, then exit disregarding all other options. :switch:`--subdirs={subdir}` Actual object directory of each project file, which is the subdirectory ``subdir`` of the object directory specified or defaulted in the project file. :switch:`--unchecked-shared-lib-imports` By default, shared library projects are not allowed to import static library projects. When this switch is specified, this restriction is lifted. .. index:: -c (gnatclean) :switch:`-c` Only attempt to delete the files produced by the compiler, not those produced by the binder or the linker. The files that are not to be deleted are library files, interface copy files, binder generated files and executable files. .. index:: -D (gnatclean) :switch:`-D {dir}` Indicate that ALI and object files should normally be found in directory ``dir``. .. index:: -F (gnatclean) :switch:`-F` When using project files, if some errors or warnings are detected during parsing and verbose mode is not in effect (the switch :switch:`-v` is not specified), error lines start with the full path name of the project file, rather than its simple file name. .. index:: -h (gnatclean) :switch:`-h` Output a message explaining the usage of ``gnatclean``. .. index:: -n (gnatclean) :switch:`-n` Informative-only mode. Do not delete any files. Output the list of the files that would have been deleted if this switch was not specified. .. index:: -P (gnatclean) :switch:`-P{project}` Use project file ``project``. You can specify only one such switch. When cleaning a project file, ``gnatclean`` deletes the files produced by the compilation of the immediate sources or inherited sources of the project files. This does not depend on whether or not you include executable names on the command line. .. index:: -q (gnatclean) :switch:`-q` Quiet output. If there are no errors, do not output anything, except in verbose mode (:switch:`-v`) or in information-only mode (:switch:`-n`). .. index:: -r (gnatclean) :switch:`-r` When a project file is specified (using :switch:`-P`), clean all imported and extended project files, recursively. If you don't specify this switch, ``gnatclean`` only deletes the files related to the main project file. This switch has no effect if you don't specify a project file. .. index:: -v (gnatclean) :switch:`-v` Verbose mode. .. index:: -vP (gnatclean) :switch:`-vP{x}` Indicates the verbosity of the parsing of GNAT project files. :ref:`Switches_Related_to_Project_Files`. .. index:: -X (gnatclean) :switch:`-X{name}={value}` Indicates that external variable ``name`` has the value ``value``. The Project Manager will use this value for occurrences of ``external(name)`` when parsing the project file. See :ref:`Switches_Related_to_Project_Files`. .. index:: -aO (gnatclean) :switch:`-aO{dir}` When searching for ALI and object files, look in directory ``dir``. .. index:: -I (gnatclean) :switch:`-I{dir}` Equivalent to :switch:`-aO{dir}`. .. index:: -I- (gnatclean) .. index:: Source files, suppressing search :switch:`-I-` Do not look for ALI or object files in the directory where ``gnatclean`` was invoked. .. _The_GNAT_Library_Browser_gnatls: The GNAT Library Browser ``gnatls`` =================================== .. index:: Library browser .. index:: ! gnatls ``gnatls`` is a tool that outputs information about compiled units. It gives the relationship between objects, unit names and source files. You can also use it to check the source dependencies of a unit as well as various characteristics. .. _Running_gnatls: Running ``gnatls`` ------------------ You run the ``gnatls`` command as follows: :: $ gnatls switches object_or_ali_file The main argument is the list of object or :file:`ali` files (see :ref:`The_Ada_Library_Information_Files`) for which you are requesting information. In the default mode, without additional options, ``gnatls`` produces a four-column listing. Each line contains information for a specific object. The first column gives the full path of the object, the second column gives the name of the principal unit in the object, the third column gives the status of the source and the fourth column gives the full path of the source representing this unit. Here's a simple example: :: $ gnatls *.o ./demo1.o demo1 DIF demo1.adb ./demo2.o demo2 OK demo2.adb ./hello.o h1 OK hello.adb ./instr-child.o instr.child MOK instr-child.adb ./instr.o instr OK instr.adb ./tef.o tef DIF tef.adb ./text_io_example.o text_io_example OK text_io_example.adb ./tgef.o tgef DIF tgef.adb You should interpret the first line as follows: the main unit, which is contained in object file :file:`demo1.o`, is demo1, whose main source is in :file:`demo1.adb`. Furthermore, the version of the source used for the compilation of demo1 has been modified (DIF). Each source file has a status qualifier which can be: *OK (unchanged)* The version of the source file used for the compilation of the specified unit corresponds exactly to the actual source file. *MOK (slightly modified)* The version of the source file used for the compilation of the specified unit differs from the actual source file but not enough to require recompilation (e.g., only comments have been changed). If you run ``gnatmake`` with the option :switch:`-m` (minimal recompilation), it will not recompile a file marked MOK. *DIF (modified)* No version of the source found on the path corresponds to the source used to build this object. *??? (file not found)* No source file was found for this unit. *HID (hidden, unchanged version not first on PATH)* The version of the source that corresponds exactly to the source used for compilation has been found on the path but it is hidden by another version of the same source that has been modified. .. _Switches_for_gnatls: Switches for ``gnatls`` ----------------------- You can specify the following switches to ``gnatls``: .. index:: --version (gnatls) :switch:`--version` Display copyright and version, then exit, disregarding all other options. .. index:: --help (gnatls) :switch:`--help` If :switch:`--version` was not specified, display usage, then exit, disregarding all other options. .. index:: -a (gnatls) :switch:`-a` Consider all units, including those of the predefined Ada library. Especially useful with :switch:`-d`. .. index:: -d (gnatls) :switch:`-d` List sources that specified units depend on. .. index:: -h (gnatls) :switch:`-h` Output the list of options. .. index:: -o (gnatls) :switch:`-o` Only output information about object files. .. index:: -s (gnatls) :switch:`-s` Only output information about source files. .. index:: -u (gnatls) :switch:`-u` Only output information about compilation units. .. index:: -files (gnatls) :switch:`-files={file}` Take as arguments the files listed in text file ``file``, which may contain empty lines that are ignored. Each nonempty line should contain the name of an existing file. Several such switches may be specified on the same command. .. index:: -aO (gnatls) .. index:: -aI (gnatls) .. index:: -I (gnatls) .. index:: -I- (gnatls) :switch:`-aO{dir}`, :switch:`-aI{dir}`, :switch:`-I{dir}`, :switch:`-I-`, :switch:`-nostdinc` Source path manipulation. It has the same meaning as the equivalent ``gnatmake`` switches (:ref:`Switches_for_gnatmake`). .. index:: -aP (gnatls) :switch:`-aP{dir}` Add ``dir`` at the beginning of the project search dir. .. index:: --RTS (gnatls) :switch:`--RTS={rts-path}` Specifies the default location of the runtime library. It has the same meaning as the equivalent ``gnatmake`` switch (:ref:`Switches_for_gnatmake`). .. index:: -v (gnatls) :switch:`-v` Verbose mode. Output the complete source, object and project paths. Don't use the default column layout but instead use long format giving as much as information possible on each requested units, including special characteristics such as: * *Preelaborable*: The unit is preelaborable in the Ada sense. * *No_Elab_Code*: No elaboration code has been produced by the compiler for this unit. * *Pure*: The unit is pure in the Ada sense. * *Elaborate_Body*: The unit contains a pragma Elaborate_Body. * *Remote_Types*: The unit contains a pragma Remote_Types. * *Shared_Passive*: The unit contains a pragma Shared_Passive. * *Predefined*: This unit is part of the predefined environment and cannot be modified by the user. * *Remote_Call_Interface*: The unit contains a pragma Remote_Call_Interface. .. _Example_of_gnatls_Usage: Example of ``gnatls`` Usage --------------------------- Here's an example of using the verbose switch. Note how the source and object paths are affected by the :switch:`-I` switch. :: $ gnatls -v -I.. demo1.o GNATLS 5.03w (20041123-34) Copyright 1997-2004 Free Software Foundation, Inc. Source Search Path: ../ /home/comar/local/adainclude/ Object Search Path: ../ /home/comar/local/lib/gcc-lib/x86-linux/3.4.3/adalib/ Project Search Path: /home/comar/local/lib/gnat/ ./demo1.o Unit => Name => demo1 Kind => subprogram body Flags => No_Elab_Code Source => demo1.adb modified Here's an example of use of the dependency list. Note the use of the :switch:`-s` switch, which gives a simple list of source files. You may find this useful for building specialized scripts. :: $ gnatls -d demo2.o ./demo2.o demo2 OK demo2.adb OK gen_list.ads OK gen_list.adb OK instr.ads OK instr-child.ads $ gnatls -d -s -a demo1.o demo1.adb /home/comar/local/adainclude/ada.ads /home/comar/local/adainclude/a-finali.ads /home/comar/local/adainclude/a-filico.ads /home/comar/local/adainclude/a-stream.ads /home/comar/local/adainclude/a-tags.ads gen_list.ads gen_list.adb /home/comar/local/adainclude/gnat.ads /home/comar/local/adainclude/g-io.ads instr.ads /home/comar/local/adainclude/system.ads /home/comar/local/adainclude/s-exctab.ads /home/comar/local/adainclude/s-finimp.ads /home/comar/local/adainclude/s-finroo.ads /home/comar/local/adainclude/s-secsta.ads /home/comar/local/adainclude/s-stalib.ads /home/comar/local/adainclude/s-stoele.ads /home/comar/local/adainclude/s-stratt.ads /home/comar/local/adainclude/s-tasoli.ads /home/comar/local/adainclude/s-unstyp.ads /home/comar/local/adainclude/unchconv.ads .. only:: PRO or GPL .. _The_GNAT_Pretty_Printer_gnatpp: The GNAT Pretty Printer ``gnatpp`` ================================== .. index:: ! gnatpp .. index:: pretty printer The ``gnatpp`` tool is a utility for source reformatting / pretty printing. It takes an Ada source file as input and generates a reformatted version as output. You can specify various style directives via switches; e.g., identifier case conventions, rules of indentation, and comment layout. ``gnatpp`` is a project-aware tool (see :ref:`Using_Project_Files_with_GNAT_Tools` for a description of the project-related switches). The project file package that can specify ``gnatpp`` switches is named ``Pretty_Printer``. ``gnatpp`` cannot process sources that contain preprocessing directives. The ``gnatpp`` command has the form :: $ gnatpp [ switches ] filename where * ``switches`` is an optional sequence of switches defining such properties as the formatting rules, the source search path, and the destination for the output source file * ``filename`` is the name of the source file to reformat; wildcards or several file names on the same gnatpp command are allowed. The file name may contain path information; it does not have to follow the GNAT file naming rules Note that you no longer need to specify the Ada language version; ``gnatpp`` can process Ada source code written in any version from Ada 83 onward without specifying any language version switch. .. _Switches_for_gnatpp: Switches for ``gnatpp`` ----------------------- The following subsections describe the various switches accepted by ``gnatpp``, organized by category. You specify a switch by supplying a name and usually also a value. In many cases the values for a switch with a given name are incompatible with each other (for example the switch that controls the casing of a reserved word may have exactly one value: upper case, lower case, or mixed case) and thus exactly one such switch can be in effect for an invocation of ``gnatpp``. If more than one is supplied, the last one is used. However, some values for the same switch are mutually compatible. You may supply several such switches to ``gnatpp``, but each must be specified in full, with both the name and the value. Abbreviated forms (the name appearing once, followed by each value) are not permitted. .. _Layout_Control: Layout Control ^^^^^^^^^^^^^^ .. index:: Layout control in gnatpp ``gnatpp`` provides a layout switch which controls the general formatting style: .. index:: layout(gnatpp) :switch:`--layout=default|minimal|compact|tall` :switch:`default` The default layout is a compact style, but ``gnatpp`` adds alignment and puts some keywords on a separate line. ``gnatpp`` adds alignment in the the following constructs: * ``:`` in declarations, * ``:=`` in initializations in declarations, * ``:=`` in assignment statements, * ``=>`` in associations, and * ``at`` keywords in the component clauses in record representation clauses. In addition, ``gnatpp`` also lines up ``in`` and ``out`` keywords in parameter specifications. ``gnatpp`` places the keyword ``is`` on a separate line in a subprogram body in case the spec occupies more than one line. ``gnatpp`` places the keyword ``return`` on a separate line if a subprogram spec does not fit on one line. :switch:`minimal` The minimal layout will avoid changing the source layout by keeping all line breaks from the original source (it will not insert or delete any). It will add indentation where appropriate as long as it does not exceed the line length limit. :switch:`compact` The compact layout avoids adding line breaks and alignment by packing as many subexpressions on the same line as possible. Whole-line comments that form a paragraph are filled in typical word processor style (that is, moving words between lines to make them similar in length, except the last one which may be shorter). For each whole-line comment that does not end with two hyphens, inserts spaces if necessary after the starting two hyphens to ensure that there are at least two spaces preceding the first non-blank character of the comment. :switch:`tall` The tall layout favors adding lines breaks and alignment. It adds all the alignment and line breaks defined in the ``default`` option, and in addition: * Places the keyword ``loop`` in FOR and WHILE loop statements on a separate line * Places the keyword ``then`` in IF statements on a separate line * Places each keyword ``use`` in USE clauses on a separate line * Splits the line just before the keyword ``record`` in a RECORD type declaration * Indents named blocks and loop statments with respect to the name * When necessary, splits binary operators always before the operator * Inserts an extra blank before various occurrences of ``(`` and ``:`` * When it is necessary to split a line between two subexpressions (because otherwise the construct would exceed --max-line-length), then all such subexpressions are placed on separate lines * Formats enumeration type declarations “vertically”, e.g. each enumeration literal goes on a separate line * Formats array type declarations “vertically”, e.g. for multidimensional arrays, each index_subtype_definition or discrete_subtype_definition goes on a separate line * Format aggregates “vertically” if named notation is used for all component_associations, e.g. each component_association goes on a separate line * Formats case statements, case expressions, and variant parts with additional line breaks * Inserts blank lines where appropriate (between bodies and other large constructs) * Similarly to the :switch:`compact` layout, two spaces are added in the beginning of a whole-line comment when needed .. _Casing_Control: Casing Control ^^^^^^^^^^^^^^ .. index:: Casing control in gnatpp ``gnatpp`` allows you to specify the casing for reserved words, pragma names, attribute designators, and identifiers. For identifiers, you may define a general rule for name casing but also override this rule via a set of dictionary files. Three types of casing are supported: 'Lower Case', 'Upper Case', and 'Mixed Case'. 'Mixed case' means that the first letter and each letter immediately following an underscore are converted to their uppercase forms and all other letters are converted to their lowercase forms. .. index:: --name-case-as-declared (gnatpp) :switch:`--name-case-as-declared, -nD` Name casing for defining occurrences are as they appear in the source file (this is the default). .. index:: --name-upper-case (gnatpp) :switch:`--name-upper-case, -nU` Names are in upper case. .. index:: --name-lower-case (gnatpp) :switch:`--name-lower-case, -nL` Names are in lower case. .. index:: --name-mixed-case (gnatpp) :switch:`--name-mixed-case, -nM` Names are in mixed case. .. index:: --attribute-lower-case (gnatpp) :switch:`--attribute-lower-case, -aL` Attribute designators are lower case. .. index:: --attribute-upper-case (gnatpp) :switch:`--attribute-upper-case, -aU` Attribute designators are upper case. .. index:: --attribute-mixed-case (gnatpp) :switch:`--attribute-mixed-case, -aM` Attribute designators are mixed case (this is the default). .. index:: --keyword-lower-case (gnatpp) :switch:`--keyword-lower-case, -kL` Keywords (technically, these are known in Ada as *reserved words*) are lower case (this is the default). .. index:: --keyword-upper-case (gnatpp) :switch:`--keyword-upper-case, -kU` Keywords are upper case. .. index:: --enum-case-as-declared (gnatpp) :switch:`--enum-case-as-declared, -neD` Enumeration literal casing for defining occurrences are as they appear in the source file. Overrides the :switch:`-n` casing setting. .. index:: --enum-upper-case (gnatpp) :switch:`--enum-upper-case, -neU` Enumeration literals are in upper case. Overrides the :switch:`-n` casing setting. .. index:: --enum-lower-case (gnatpp) :switch:`--enum-lower-case, -neL` Enumeration literals are in lower case. Overrides the :switch:`-n` casing setting. .. index:: --enum-mixed-case (gnatpp) :switch:`--enum-mixed-case, -neM` Enumeration literals are in mixed case. Overrides the :switch:`-n` casing setting. .. index:: --type-case-as-declared (gnatpp) :switch:`--type-case-as-declared, -ntD` Names introduced by type and subtype declarations are always cased as they appear in the declaration in the source file. Overrides the :switch:`-n` casing setting. .. index:: --type-upper-case (gnatpp) :switch:`--type-upper-case, -ntU` Names introduced by type and subtype declarations are always in upper case. Overrides the :switch:`-n` casing setting. .. index:: --type-lower-case (gnatpp) :switch:`--type-lower-case, -ntL` Names introduced by type and subtype declarations are always in lower case. Overrides the :switch:`-n` casing setting. .. index:: --type-mixed-case (gnatpp) :switch:`--type-mixed-case, -ntM` Names introduced by type and subtype declarations are always in mixed case. Overrides the :switch:`-n` casing setting. .. index:: --number-upper-case (gnatpp) :switch:`--number-upper-case, -nnU` Names introduced by number declarations are always in upper case. Overrides the :switch:`-n` casing setting. .. index:: --number-lower-case (gnatpp) :switch:`--number-lower-case, -nnL` Names introduced by number declarations are always in lower case. Overrides the :switch:`-n` casing setting. .. index:: --number-mixed-case (gnatpp) :switch:`--number-mixed-case, -nnM` Names introduced by number declarations are always in mixed case. Overrides -n casing setting. .. index:: --pragma-lower-case (gnatpp) :switch:`--pragma-lower-case, -pL` Pragma names are lower case. .. index:: --pragma-upper-case (gnatpp) :switch:`--pragma-upper-case, -pU` Pragma names are upper case. .. index:: --pragma-mixed-case (gnatpp) :switch:`--pragma-mixed-case, -pM` Pragma names are mixed case (this is the default). .. index:: --constant-case-as-non-constant (gnatpp) :switch:`--constant-case-as-non-constant, -cN` Constant object declaration names have the same case as the name casing (this is the default). .. index:: --constant-case-as-declared (gnatpp) :switch:`--constant-case-as-declared, -cD` Constant object declaration names are as they appear in the source file. .. index:: --constant-lower-case (gnatpp) :switch:`--constant-lower-case, -cL` Constant object declaration names are lower case. .. index:: --constant-upper-case (gnatpp) :switch:`--constan-upper-case, -cU` Constant object declaration names are upper case. .. index:: --constant-mixed-case (gnatpp) :switch:`--constant-mixed-case, -cM` Constant object declaration names are mixed case. .. index:: --syntax-only (gnatpp) :switch:`--syntax-only` Disable the semantic analysis (name resolution) done by libadalang. This means ``gnatpp`` is not able to support any of the "as-declared" switches. .. index:: --dictionary (gnatpp) :switch:`--dictionary={file}, -D={file}` Use ``file`` as a *dictionary file* that defines the casing for a set of specified names, thereby overriding the effect on these names by any explicit or implicit -n switch. To supply more than one dictionary file, use several ``--dictionary`` switches. ``gnatpp`` implicitly uses a *default dictionary file* to define the casing for the Ada predefined names and the names declared in the GNAT libraries. .. index:: --dictionary=- (gnatpp) :switch:`--dictionary=-, -D=-` Do not use the default dictionary file; instead, use the casing defined by a :switch:`-n` switch and any explicit dictionary file(s) The structure of a dictionary file, and details on the conventions used in the default dictionary file, are defined in :ref:`Name_Casing`. The :switch:`--dictionary=-` and :switch:`--dictionary={file}` switches are mutually compatible. This group of ``gnatpp`` switches controls the layout of comments and complex syntactic constructs. See :ref:`Formatting_Comments` for details on their effect. .. _General_Text_Layout_Control: General Text Layout Control ^^^^^^^^^^^^^^^^^^^^^^^^^^^ These switches allow control over line length and indentation. .. index:: --max-line-length (gnatpp) :switch:`--max-line-length={nnn}, -M={nnn}` Maximum line length, ``nnn`` from 32...256. The default value is 79 .. index:: --indentation (gnatpp) :switch:`--indentation={nnn}, -i={nnn}` Indentation level, ``nnn`` from 1...9. The default value is 3 .. index:: --indent-continuation (gnatpp) :switch:`--indent-continuation={nnn}, -cl={nnn}` Indentation level for continuation lines (relative to the line being continued), ``nnn`` from 1...9. The default value is one less than the (normal) indentation level, unless the indentation is set to 1 (in which case the default value for continuation line indentation is also 1) .. _Other_Formatting_Options: Other Formatting Options ^^^^^^^^^^^^^^^^^^^^^^^^ These switches control other formatting not listed above. .. index:: --decimal-grouping (gnatpp) :switch:`--decimal-grouping={n}` Put underscores in decimal literals (numeric literals without a base) every ``n`` characters. If a literal already has one or more underscores, ``gnatpp`` will not modify it. For example, with ``--decimal-grouping=3``, ``1000000`` is changed to ``1_000_000``. .. index:: --based-grouping (gnatpp) :switch:`--based-grouping={n}` Same as ``--decimal-grouping``, but for based literals. For example, with ``--based-grouping=4``, ``16#0001FFFE#`` is changed to ``16#0001_FFFE#``. .. index:: --call-threshold (gnatpp) :switch:`--call-threshold={nnn}` If the number of parameter associations is greater than ``nnn`` and if at least one association uses named notation, start each association from a new line. If ``nnn`` is 0, ``gnatpp`` does not check for the number of associations; this is the default. .. index:: --par-threshold (gnatpp) :switch:`--par-threshold={nnn}` If the number of parameter specifications is greater than ``nnn`` (or equal to ``nnn`` in case of a function), start each specification from a new line. If ``nnn`` is 0, and :switch:`--no-separate-is` was not specified, then the ``is`` is placed on a separate line. This option is disabled by default. .. _Setting_the_Source_Search_Path: Setting the Source Search Path ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ To define the search path for the input source file, pass ``gnatpp`` the same switches as the GNAT compiler, with the same effects: .. index:: -I (gnatpp) :switch:`-I{dir}` .. index:: -I- (gnatpp) :switch:`-I-` .. index:: -gnatec (gnatpp) :switch:`-gnatec={path}` .. _Output_File_Control-gnatpp: Output File Control ^^^^^^^^^^^^^^^^^^^ By default, the output overwrites the input file. You can specify the location of the output with the following switches: .. index:: --replace (gnatpp) :switch:`--replace, -rnb` This is the default. Replace the input source file with the reformatted output without creating any backup copy of the input source. .. index:: --output-dir (gnatpp) :switch:`--output-dir={dir}` Generate the output file in directory :file:`dir` with the same name as the input file. If :file:`dir` is the same as the directory containing the input file, ``gnatpp`` does not read or process the input file; use ``--replace`` if you want to update the input file in place. .. index:: --pipe (gnatpp) :switch:`--pipe, -pipe` Send the output to ``Standard_Output`` .. index:: --output (gnatpp) :switch:`--output={output_file}, -o={output_file}` Write the output into ``output_file``. If ``output_file`` already exists, ``gnatpp`` terminates without reading or processing the input file. .. index:: --output-force (gnatpp) :switch:`--output-force={output_file}, -of={output_file}` Write the output into ``output_file``, overwriting the existing file (if one is present). .. index:: --replace-backup (gnatpp) :switch:`--replace-backup, -r` Replace the input source file with the reformatted output and copy the original input source into the file whose name is obtained by appending the :file:`.npp` suffix to the name of the input file. If a file with this name already exists, ``gnatpp`` terminates without reading or processing the input file. .. index:: --replace-force-backup (gnatpp) :switch:`--replace-force-backup, -rf` Like ``--replace-backup`` except that if the file with the specified name already exists, it is overwritten. .. index:: --eol (gnatpp) :switch:`--eol={xxx}` Specifies the line-ending style of the reformatted output file. The ``xxx`` string specified with the switch may be: * *dos* - MS DOS style, lines end with CR LF characters* * *crlf* - the same as *dos* * *unix* - UNIX style, lines end with LF character* * *lf* - the same as *unix* The default is to use the same end-of-line convention as the input. .. index:: --wide-character-encoding (gnatpp) :switch:`--wide-character-encoding={e}, -W={e}` Specify the wide character encoding method for the input and output files. ``e`` is one of the following: * *8* - UTF-8 encoding * *b* - Brackets encoding (default value) You may only specify options :switch:`--output-file` and :switch:`--output-force` if the call to ``gnatpp`` contains only one file to reformat. You may not use the option :switch:`--eol` or :switch:`--wide-character-encoding` together with the :switch:`--pipe` option. .. _Other_gnatpp_Switches: Other ``gnatpp`` Switches ^^^^^^^^^^^^^^^^^^^^^^^^^ You can also use the additional ``gnatpp`` switches defined in this subsection. .. index:: --version (gnatpp) :switch:`--version` Display copyright and version, then exit, disregarding all other options. .. index:: --help (gnatpp) :switch:`--help` Display usage, then exit, disregarding all other options. .. index:: -P (gnatpp) :switch:`-P {file}` Specifies the name of the project file that describes the set of sources to be processed. The exact set of argument sources depends on other options specified; see below. .. index:: -U (gnatpp) :switch:`-U` If you specify a project file but don't specify a source file, either directly or by means of a :switch:`--files` option, ``gnatpp`` processes all the units of the closure of the specifed project. Otherwise this option has no effect. :switch:`-U {main_unit}` If you specify a project file but don't specify a source file, either directly or by means of :switch:`--files` option, ``gnatpp`` will process the closure of units rooted at ``main_unit``. Otherwise this option has no effect. .. index:: -X (gnatpp) :switch:`-X{name}={value}` Indicates that external variable ``name`` in the specified project has the value ``value``. Has no effect if you don't specify a project. .. index:: --RTS (gnatpp) :switch:`--RTS={rts-path}` Specifies the default location of the runtime library. It has the same meaning as the equivalent ``gnatmake`` switch (:ref:`Switches_for_gnatmake`). .. index:: --incremental (gnatpp) :switch:`--incremental` ``gnatpp`` will perform incremental processing on a per-file basis. It will only process a source file if it has been modified, or if files it depends on have been modified. This is similar to the way ``gnatmake``/``gprbuild`` only compiles files that need to be recompiled. You must specify a project file in this mode, and the gnat driver (as in *gnat pretty*) is not supported. (Note: this switch is not yet supported in the libadalang-based version of ``gnatpp``.) .. index:: --pp-off (gnatpp) :switch:`--pp-off={xxx}` Use :switch:`--xxx` as the command to turn off pretty printing, instead of the default ``--!pp off``. .. index:: --pp-on (gnatpp) :switch:`--pp-on={xxx}` Use :switch:`--xxx` as the command to turn pretty printing back on, instead of the default ``--!pp on``. .. index:: --files (gnatpp) :switch:`--files={filename}, -files={filename}` Take as arguments the files listed in text file ``file``, which may contain empty lines that are ignored. Each nonempty line should contain the name of an existing file. You may specify several such switches on the same command line. .. index:: --ignore (gnatpp) :switch:`--ignore={filename}` ``gnatpp`` will not process the sources listed in the specified file. You can't specify this option in incremental mode. .. index:: --jobs (gnatpp) :switch:`--jobs={n}, -j={n}` With :switch:`--incremental`, use *n* ``gnatpp`` processes to perform pretty printing in parallel. If *n* is 0, the maximum number processes is the number of core processors on the host. .. index:: --verbose (gnatpp) :switch:`--verbose, -v` Verbose mode .. index:: --quiet (gnatpp) :switch:`--quiet, -q` Quiet mode If you specify a project file, but no source files (either directly or by means of a :switch:`--files` option), and you specify the :switch:`-U`, then the set of processed sources is all the immediate units of the argument project. .. _Formatting_Rules: Formatting Rules ---------------- The following subsections show how ``gnatpp`` treats comments, program layout, and name casing as well as how to disable ``gnatpp`` in source code regions. They provide more details of the switches shown above. .. _Disabling_Pretty_Printing: Disabling Pretty Printing ^^^^^^^^^^^^^^^^^^^^^^^^^ Pretty printing is highly heuristic in nature and sometimes doesn't do exactly what you want. If you want to format a certain region of code by hand, you can turn off pretty printing in that region by surrounding it with special comments that start with ``--!pp off`` and ``--!pp on``. The text in that region is reproduced verbatim in the output with no formatting. To disable pretty printing for an entire file, put ``--!pp off`` at the top, with no following ``--!pp on``. You must place each of these comments on a line by themselves, with nothing preceding except spaces. You must have the initial text of the comment be exactly ``--!pp off`` or ``--!pp on`` (case sensitive), but you may follow it by arbitrary additional text. For example: .. code-block:: ada package Interrupts is --!pp off -- turn off pretty printing so "Interrupt_Kind" lines up type Interrupt_Kind is (Asynchronous_Interrupt_Kind, Synchronous_Interrupt_Kind, Green_Interrupt_Kind); --!pp on -- reenable pretty printing ... You can specify different comment strings using the :switch:`--pp-off` and :switch:`--pp-on` switches. For example, if you say: :: $ gnatpp --pp-off=' pp-' *.ad? ``gnatpp`` will recognize comments of the form ``-- pp-`` instead of ``--!pp off`` for disabling pretty printing. Note that you do not include the leading ``--`` of the comment in the argument to these switches. .. _Formatting_Comments: Formatting Comments ^^^^^^^^^^^^^^^^^^^ Only :switch:`--layout=compact` and :switch:`--layout=tall` format comments. Comments in Ada code are of two kinds: * *whole-line comments*, which appear by themselves (possibly preceded by white space) on a line * *end-of-line comments*, which follows some other Ada code on the same line. ``gnatpp`` indents whole-line comment according to the surrounding code, with some exceptions. Comments that start in column 1 are kept there. If possible, comments are not moved so far to the right that the maximum line length is exceeded. Special-form comments such as SPARK-style ``--#...`` are left alone. For an end-of-line comment, ``gnatpp`` tries to leave the same number of spaces between the end of the preceding Ada code and the beginning of the comment, as it appears in the original source. For each whole-line comment that does not end with two hyphens or that are not special-form comments, ``gnatpp`` inserts spaces if necessary after the starting two hyphens to ensure that there are at least two spaces between these hyphens and the first non-blank character of the comment. With :switch:`--layout=compact`, ``gnatpp`` fills in whole-line comments that form a paragraph in typical word processor style (that is, moving words between lines to make the lines other than the last similar in length). .. _Name_Casing: Name Casing ^^^^^^^^^^^ ``gnatpp`` always converts the usage occurrence of a (simple) name to the same casing as the corresponding defining identifier. You control the casing for defining occurrences via the :switch:`--name...` switches. With :switch:`--name-case-as-declared`, which is the default, defining occurrences appear exactly as in the source file where they are declared. The other values for this switch -- :switch:`--name-upper-case`, :switch:`--name-lower-case`, and :switch:`--name-mixed-case` -- result in upper, lower, or mixed case, respectively. If ``gnatpp`` changes the casing of a defining occurrence, it similarly changes the casing of all the usage occurrences of this name. If the defining occurrence of a name is not in the source compilation unit currently being processed by ``gnatpp``, ``gnatpp`` changes the casing of each reference to this name according to the switch (subject to the dictionary file mechanism described below). Thus ``gnatpp`` acts as though the switch had affected the casing for the defining occurrence of the name. The options :switch:`--attribute...`, :switch:`--keyword...`, :switch:`--enum...`, :switch:`--type...`, :switch:`--number...`, and :switch:`--pragma...` allow finer-grained control over casing for attributes, keywords, enumeration literals, types, named numbers and pragmas, respectively. :switch:`--type...` cover subtypes as well. You may need some names to be spelled with casing conventions that are not covered by the upper-, lower-, and mixed-case transformations. You can have ``gnatpp`` produce the correct casing by placing such names in a *dictionary file*, and specifying a :switch:`--dictionary` switch. Specifying any dictionary files overrides any :switch:`--name...` switch. ``gnatpp`` uses a default dictionary file to choose the casing of Ada predefined names and the names from GNAT libraries, Each predefined entity is converted to the same casing as the entity in the :title:`Ada Reference Manual` (usually mixed case) and each entity in the GNAT libraries is cased the same as its declaration in the library. You can specify the :switch:`--dictionary=-` switch to suppress the use of the default dictionary file. Instead, the casing for predefined and GNAT-defined names is given by the :switch:`-n` switch or explicit dictionary files. For example, by default the names ``Ada.Text_IO`` and ``GNAT.OS_Lib`` appear as just shown, even in the presence of a :switch:`--name-upper-case` switch. To ensure that even such names are rendered in uppercase, you must specify the :switch:`--dictionary=-` switch or place these names in upper case in a dictionary file. A dictionary file is a plain text file; each line in this file is either a blank line (containing only space characters), an Ada comment line, or the specification of exactly one *casing schema*. A casing schema is a string with the following syntax: :: casing_schema ::= identifier | simple_identifier simple_identifier ::= letter{letter_or_digit} (See :title:`Ada Reference Manual`, Section 2.3) for the definition of the ``identifier`` lexical element and the ``letter_or_digit`` category.) You can follow a casing schema string by white space and/or an Ada-style comment. You can also have any amount of white space before the string. If you pass a dictionary file as the value of a :switch:`--dictionary={file}` switch, ``gnatpp`` checks every simple name and identifier to see if the dictionary defines the casing for the name or for some of its parts (the term 'subword' is used below to denote the part of a name that is delimited by '_' or by the beginning or end of the word that doesn't contain any '_' characters): * if the complete name is in the dictionary, ``gnatpp`` uses the casing defined by the dictionary for this name; it does not check any subwords * for every subword, ``gnatpp`` checks if the dictionary contains the corresponding string of the form ``simple_identifier``, and if it does, the casing of this ``simple_identifier`` is used for this subword * if the complete name does not contain any '_' characters and if for this name the dictionary contains two entries -- one of the form ``identifier``, and another of the form ``simple_identifier`` -- ``gnatpp`` uses the first one to obtain the casing of this name * if you pass more than one dictionary file as ``gnatpp`` switches, each dictionary adds new casing exceptions and overrides all the existing casing exceptions set by the previous dictionaries * when ``gnatpp`` checks if the word or subword is in the dictionary, it uses a check that's not case sensitive For example, suppose we have the following source to reformat: .. code-block:: ada procedure test is name1 : integer := 1; name4_name3_name2 : integer := 2; name2_name3_name4 : Boolean; name1_var : Float; begin name2_name3_name4 := name4_name3_name2 > name1; end; And suppose we have two dictionaries: :: *dict1:* NAME1 *NaMe3* *Name1* *dict2:* *NAME3* If ``gnatpp`` is called with the following switches: :: $ gnatpp --name-mixed-case --dictionary=dict1 --dictionary=dict2 test.adb then we get the following name casing in the ``gnatpp`` output: .. code-block:: ada procedure Test is NAME1 : Integer := 1; Name4_NAME3_Name2 : Integer := 2; Name2_NAME3_Name4 : Boolean; Name1_Var : Float; begin Name2_NAME3_Name4 := Name4_NAME3_Name2 > NAME1; end Test; .. _Preprocessor_directives: Preprocessor Directives ^^^^^^^^^^^^^^^^^^^^^^^ ``gnatpp`` has some support for preprocessor directives. You can use preprocessor symbols such as ``$symbol``. In addition, you can use conditional compilation as long as the program text is syntactically legal Ada code after removing all the preprocessor directives (lines starting with ``#``). For example, ``gnatpp`` can format the following: .. code-block:: ada package P is #IF SOMETHING X : constant Integer := 123; #ELSE X : constant Integer := 456; #END IF; end P; which will be formatted as if it were: .. code-block:: ada package P is X : constant Integer := 123; X : constant Integer := 456; end P; except that the ``#`` lines will be preserved. However, ``gnatpp`` cannot format the following: .. code-block:: ada procedure P is begin #IF SOMETHING if X = 0 then #ELSE if X = 1 then #END IF; null; end if; end P; because removing the ``#`` lines gives: .. code-block:: ada procedure P is begin if X = 0 then if X = 1 then null; end if; end P; which is not syntactically legal. Legacy Switches ^^^^^^^^^^^^^^^ .. index:: --alignment (gnatpp) :switch:`--alignment, --no-alignment` Programs can be easier to read if certain constructs are vertically aligned. * ``:`` in declarations, * ``:=`` in initializations in declarations, * ``:=`` in assignment statements, * ``=>`` in associations, and * ``at`` keywords in the component clauses in record representation clauses. .. index:: --align-modes (gnatpp) :switch:`--align-modes, --no-align-modes` Line up ``in`` and ``out`` in parameter specifications. .. index:: --compact (gnatpp) :switch:`--compact, --no-compact` In calls and similar constructs, :switch:`--compact` packs as many subexpressions into the same line as is possible. Example: .. code-block:: ada Some_Procedure (Short_One, Another_Short_One, A_Very_Very_Very_Very_Very_Very_Very_Very_Long_One); On the other hand, if you specify :switch:`--no-compact`, ``gnatpp`` places all such subexpressions on separate lines if it's necessary to split a line between two subexpressions to avoid the construct exceeding :switch:`--max-line-length`. For example: .. code-block:: ada Some_Procedure (Short_One, Another_Short_One, A_Very_Very_Very_Very_Very_Very_Very_Very_Long_One); .. index:: --end-id (gnatpp) :switch:`--end-id, --no-end-id` Insert the name of a unit after ``end``. Otherwise, leave whatever comes after ``end``, if anything, alone. .. index:: --separate-is (gnatpp) :switch:`--separate-is, --no-separate-is` Place the keyword ``is`` on a separate line in a subprogram body in case if the spec occupies more than one line. .. index:: --separate-return (gnatpp) :switch:`--separate-return, --no-separate-return` If a subprogram spec does not fit on one line, place the ``return`` on a separate line. Otherwise try to place it in the same line as the last parameter specification. .. index:: --separate-loop (gnatpp) :switch:`--separate-loop, --no-separate-loop` Place the keyword ``loop`` in FOR and WHILE loop statements on a separate line. .. index:: --separate-then (gnatpp) :switch:`--separate-then, --no-separate-then` Place the keyword ``then`` in IF statements on a separate line. .. index:: --separate-loop-then (gnatpp) :switch:`--separate-loop-then, --no-separate-loop-then` Equivalent to :switch:`--separate-loop` :switch:`--separate-then`. .. index:: --split-line-before-record (gnatpp) :switch:`--split-line-before-record, --no-split-line-before-record` Split the line just before ``record`` in a record type declaration. .. index:: --indent-named-statements (gnatpp) :switch:`--indent-named-statements, --no-indent-named-statements` Indent block and loop statements with respect to the name. .. index:: --split-line-before-op (gnatpp) :switch:`--split-line-before-op, --no-split-line-before-op` If it is necessary to split a line at a binary operator, by default the line is split after the operator. When you specify this switch, it is split before the operator. .. index:: --use-on-new-line (gnatpp) :switch:`--use-on-new-line, --no-use-one-new-line` Start each USE clause in a context clause from a separate line. .. index:: --vertical-enum-types (gnatpp) :switch:`--vertical-enum-types, --no-vertical-enum-types` Format enumeration type declarations "vertically", e.g. each enumeration literal goes on a separate line. .. index:: --vertical-array-types (gnatpp) :switch:`--vertical-array-types, --no-vertical-array-types` Format array type declarations "vertically", e.g. for multidimensional arrays, each index_subtype_definition or discrete_subtype_definition goes on a separate line. .. index:: --vertical-named-aggregates (gnatpp) :switch:`--vertical-named-aggregates, --no-vertical-named-aggregates` Format aggregates "vertically" if named notation is used for all component_associations, e.g. each component_association goes on a separate line. .. index:: --vertical-case-alternatives (gnatpp) :switch:`--vertical-case-alternatives, --no-vertical-case-alternatives` Format case statements, case expressions, and variant parts with additional line breaks. .. index:: --RM-style-spacing (gnatpp) :switch:`--RM-style-spacing` Do not insert an extra blank before various occurrences of '(' and ':'. Alignment is off by default in this mode; use :switch:`--alignment` to turn it on. .. index:: --insert-blank-lines (gnatpp) :switch:`--insert-blank-lines, --no-insert-blank-lines` Insert blank lines where appropriate (between bodies and other large constructs). .. index:: --preserve-blank-lines (gnatpp) :switch:`--preserve-blank-lines, --no-preserve-blank-lines` Preserve blank lines in the input. By default, gnatpp will squeeze multiple blank lines down to one. .. index:: --preserve-line-breaks (gnatpp) :switch:`--preserve-line-breaks, --no-preserve-line-breaks` Preserve line breaks in the input, to the extent possible. By default, line breaks are also inserted at appropriate places. .. index:: --source-line-breaks (gnatpp) :switch:`--source-line-breaks, --no-source-line-breaks` Keep the line breaks from the source; do not insert or delete any line breaks. .. index:: --spaces-only (gnatpp) :switch:`--spaces-only, --no-spaces-only` Disable all formatting except for inserting and removing spaces. This implies --source-line-breaks. .. index:: -c (gnatpp) :switch:`--comments-unchanged, -c0` All comments remain unchanged. :switch:`--comments-gnat-indentation, -c1` GNAT-style comment line indentation. :switch:`--comments-gnat-beginning, -c3` GNAT-style comment beginning. :switch:`--comments-fill, -c4` Fill comment blocks. :switch:`--comments-special, -c5` Keep unchanged special form comments. :switch:`--comments-only` Format just the comments. .. only:: PRO or GPL .. _The_Body_Stub_Generator_gnatstub: The Body Stub Generator ``gnatstub`` ==================================== .. index:: ! gnatstub ``gnatstub`` creates empty but compilable bodies for library unit declarations and empty but compilable subunits for body stubs. ``gnatstub`` is a project-aware tool. (See :ref:`Using_Project_Files_with_GNAT_Tools` for a description of the project-related switches but note that ``gnatstub`` does not support the :switch:`-U`, :switch:`-U {main_unit}`, :switch:`--subdirs={dir}`, or :switch:`--no-objects-dir` switches.) The project file package that can specify ``gnatstub`` switches is named ``gnatstub``. By default, all program unit bodies generated by ``gnatstub`` raise ``Program_Error``, which will catch accidental calls of generated stubs. You can change this behavior with switch :switch:`--no-exception` (see below). .. _Running_gnatstub: Running ``gnatstub`` -------------------- You invoke ``gnatstub`` like this: :: $ gnatstub [ switches ] {filename} where * *filename* is the name of the source file that contains a library unit declaration for which you want a body to be created or a library unit body for which you want subunits to be created for the body stubs declared in this body. The file name may contain path information. If the name does not follow GNAT file naming conventions and the set of switches does not contain a project file that defines naming conventions, you must explicitly provide the name of the body file as the value of the :switch:`--output={body-name}` switch. If the file name follows the GNAT file naming conventions and you do not provide the name of the body file ``gnatstub`` uses the naming conventions for the generated source from the project file provided as a parameter of a :switch:`-P` switch if any, or creates the name file using the standard GNAT naming conventions. Note that you no longer need to specify the Ada language version; ``gnatstub`` can process Ada source code written in any version from Ada 83 onward without specifying any language version switch. * *switches* is an optional sequence of switches as described in the next section .. _Switches_for_gnatstub: Switches for ``gnatstub`` ------------------------- .. index:: --version (gnatstub) :switch:`--version` Display copyright and version, then exit, disregarding all other options. .. index:: --help (gnatstub) :switch:`--help` Display usage, then exit, disregarding all other options. .. index:: -P (gnatstub) :switch:`-P {file}` Indicates the name of the project file that describes the set of sources to be processed. You can specify an aggregate project as the file parameter only if it has exactly one non-aggregate project being aggregated. .. index:: -X (gnatstub) :switch:`-X{name}={value}` Indicates that external variable ``name`` in the argument project has the value ``value``. Has no effect if no project is specified. .. index:: --RTS (gnatstub) :switch:`--RTS={rts-path}` Specifies the default location of the runtime library. It has the same meaning as the equivalent ``gnatmake`` flag (:ref:`Switches_for_gnatmake`). .. index:: --subunits (gnatstub) :switch:`--subunits` Generate subunits for body stubs. If you specify this switch, ``gnatstub`` expects a library unit body as an argument file; otherwise a library unit declaration is expected. If a body stub already has a corresponding subunit, ``gnatstub`` does not generate anything for it. .. index:: --force (gnatstub) :switch:`--force` If the destination directory already contains a file with the name of the body file for the argument spec file, replace it with the generated body stub. This switch cannot be used together with :switch:`--subunits`. .. index:: --comment-header-spec (gnatstub) :switch:`--comment-header-spec` Put the comment header (i.e., all the comments preceding the compilation unit) from the source of the library unit declaration into the body stub. .. index:: --comment-header-sample (gnatstub) :switch:`--comment-header-sample` Put a sample comment header into the body stub. .. index:: --header-file (gnatstub) :switch:`--header-file={filename}` Use the content of the file as the comment header for a generated body stub. .. index:: --max-line-length (gnatstub) :switch:`--max-line-length={n}` (``n`` is a non-negative integer). Set the maximum line length for the output files. The default is 79. The maximum value that you can specify is 32767. .. index:: --indentation (gnatstub) :switch:`--indentation={n}` (``n`` is an integer from 1 to 9). Set the indentation level in the generated files to ``n``. The default indentation is 3. .. index:: --alphabetical-order (gnatstub) :switch:`--alphabetical-order` Order local bodies alphabetically. By default local bodies are ordered in the same way as the corresponding local specs in the argument spec file. .. index:: --no-exception (gnatstub) :switch:`--no-exception` Avoid raising Program_Error in the generated bodies of program unit stubs, except in the case of functions, where there will be value to return. .. index:: --no-local-header (gnatstub) :switch:`--no-local-header` Do not place a local comment header with unit name before body stub for a unit. .. index:: --files (gnatstub) :switch:`--files={filename}` Take as arguments the files listed in text file ``file``, which may contain empty lines that are ignored. You should specify the name of an existing file in each non-empty line. You may specify multiple :switch:`--files=` switches. .. index:: --output (gnatstub) :switch:`--output={body-name}` Body file name. You should set this if the argument file name does not follow the default GNAT file naming conventions and the naming conventions are not specified by a project file. If you omit both this switch and :switch:`-P`, ``gnatpp`` will choose the name for the body according to the default GNAT file naming conventions. .. index:: --output-dir (gnatstub) :switch:`--output-dir={dir-name}` The directory in which to place the output files. If you do not specify this switch, ``gnatpp`` places the generated library unit body in the current directory and generated sununits in the directory where the argument body is located. .. index:: --wide-character-encoding (gnatstub) :switch:`--wide-character-encoding={e}` Specify the wide character encoding method for the input and output files. ``e`` is one of the following: * *8* - UTF-8 encoding * *b* - Brackets encoding (default value) .. index:: --quiet (gnatstub) .. index:: -q (gnatstub) :switch:`--quiet` / :switch:`-q` Quiet mode. .. index:: --verbose (gnatstub) .. index:: -v (gnatstub) :switch:`--verbose` / :switch:`-v` Verbose mode. Legacy Switches ^^^^^^^^^^^^^^^ Some switches have a short form, mostly for legacy reasons, as shown below. .. index:: -M (gnatstub) :switch:`-gnatyM{nnn}` :switch:`--max-line-length={nnn}` .. index:: -i (gnatstub) :switch:`-i{nnn}` :switch:`--indentation={nnn}` .. index:: -gnaty (gnatstub) :switch:`-gnaty{nnn}` :switch:`--indentation={nnn}` .. index:: -f (gnatstub) :switch:`-f` :switch:`--force` .. index:: -gnatyo (gnatstub) :switch:`-gnatyo` :switch:`--alphabetical-order` .. index:: -hg (gnatstub) :switch:`-hg` :switch:`--comment-header-sample` .. index:: -hs (gnatstub) :switch:`-hs` :switch:`--comment-header-spec` .. index:: -o (gnatstub) :switch:`-o {output-file}` :switch:`--output={output-file}` .. index:: -dir (gnatstub) :switch:`-dir {dir-name}` :switch:`--output-dir={dir-name}` .. index:: -W (gnatstub) :switch:`-W{e}` :switch:`--wide-character-encoding={e}` .. index:: -files (gnatstub) :switch:`-files {filename}` :switch:`--files={filename}` .. only:: PRO or GPL .. _The_Backtrace_Symbolizer_gnatsymbolize: Translating Code Addresses into Source Locations with ``gnatsymbolize`` ======================================================================= .. index:: ! gnatsymbolize ``gnatsymbolize`` is a program which translates addresses into their corresponding filename, line number, and function names. Running ``gnatsymbolize`` ------------------------- :: $ gnatsymbolize [ switches ] filename [ addresses ] For example, consider the following Ada program: .. code-block:: ada package Pck is Global_Val : Integer := 0; procedure Call_Me_First; end Pck; with GNAT.IO; use GNAT.IO; with GNAT.Traceback; use GNAT.Traceback; with GNAT.Debug_Utilities; package body Pck is procedure Call_Me_Third is TB : Tracebacks_Array (1 .. 5); TB_len : Natural; begin Global_Val := Global_Val + 1; Call_Chain (TB, TB_Len); for K in 1 .. TB_Len loop Put_Line (GNAT.Debug_Utilities.Image_C (TB (K))); end loop; end Call_Me_Third; procedure Call_Me_Second is begin Call_Me_Third; end Call_Me_Second; procedure Call_Me_First is begin Call_Me_Second; end Call_Me_First; end Pck; with GNAT.IO; use GNAT.IO; with GNAT.Debug_Utilities; with GNAT.Traceback; with System; with Pck; use Pck; procedure Foo is LA : constant System.Address := \ GNAT.Traceback.Executable_Load_Address; use type System.Address; begin if LA /= System.Null_Address then Put_Line ("Load address: " & GNAT.Debug_Utilities.Image_C (LA)); end if; Global_Val := 123; Call_Me_First; end Foo; This program, when built and run, prints a list of addresses which correspond to the traceback when inside function ``Call_Me_Third``. For example, on x86-64 GNU/Linux: :: $ gnatmake -g -q foo.adb $ ./foo Load address: 0x00005586C9D7D000 0x00005586C9D81105 0x00005586C9D8119B 0x00005586C9D811A7 0x00005586C9D8128C 0x00005586C9D81069 You can use ``gnatsymbolize`` to translate those addresses into code locations as follows: :: $ gnatsymbolize --load foo 0x00005586C9D7D000 0x00005586C9D81105 \ 0x00005586C9D8119B 0x00005586C9D811A7 0x00005586C9D8128C \ 0x00005586C9D81069 0x5586c9d81105 Pck.Call_Me_Third at pck.adb:12 0x5586c9d8119b Pck.Call_Me_Second at pck.adb:20 0x5586c9d811a7 Pck.Call_Me_First at pck.adb:25 0x5586c9d8128c Foo at foo.adb:6 0x5586c9d81069 Main at b~foo.adb:199 Switches for ``gnatsymbolize`` ------------------------------ You can specify the following switches for ``gnatsymbolize``: .. index:: --help (gnatsymbolize) :switch:`--help` Display the program's usage, and then exit, disregarding all other options. :switch:`--cache` Read the symbolic information from the executable and cache them in memory to accelerate the translation of each address into a symbolic location. Depending on the size of the executable and the number of addresses to translate, this may not always make ``gnatsymbolize`` faster overall. :switch:`--dump` If you have specified :switch:`--cache`, dump the contents of the cache to Standard Output. Has no effect otherwise. :switch:`--count={N}` Compute the symbolic traceback ``N`` times in a row. You use this switch mostly for measuring the performance of ``gnatsymbolize``, particularly in the case where you have specified the cache to be used. :switch:`--load` Interpret the first address as the load address of the executable. This is needed for position-independent executables on Linux and Windows. Requirements for Correct Operation ---------------------------------- The translation is performed by reading the DWARF debugging information produced by the compiler for each unit. You must therefore compile all units for which the translation is to be done in a way that DWARF debugging information is produced. In most cases, you do this by simply compiling with :switch:`-g`. This program provides a functionality similar to ``addr2line``. It has fewer options to tailor its output, but has been designed to require fewer DWARF sections to be present in the executable. In particular, it works for code compiled with ``-g1``. .. only:: PRO or GPL .. _Using_Project_Files_with_GNAT_Tools: Using Project Files with GNAT Tools =================================== This section describes how you can use project files in conjunction with a number of GNAT tools. For a comprehensive description of project files and the overall GNAT Project Manager facility, please refer to the *GNAT Project Manager* chapter in the *GPRbuild and GPR Companion Tools User's Guide*. .. index:: Project-aware tool If a tool can take a project file as an option and extract the needed information, such a tool is called a *project-aware* tool. .. _Switches_Related_to_Project_Files: Switches Related to Project Files --------------------------------- The following switches are used by the project-aware GNAT tools: :switch:`-P{project_file}` Indicates the name of the project file whose source files are to be processed. The exact set of sources depends on other options specified, see below. :switch:`-U` If you supply a project file, say for project ``proj``, but you don't specify any sources for ``proj`` (either by a project attribute or through a tool option that provides a list of the files to be used), process all the source files from projects imported either directly or indirectly by ``proj``. Otherwise this option has no effect. :switch:`-U {source_file}` Similar to :switch:`-U`, but if you don't specify any sources, process only those source files for units in the closure of the Ada source contained in ``source_file``. Note that this option expects the source file name, not the Ada unit name, as its parameter. :switch:`-X{name}={val}` Indicates that the external variable ``name`` in the project has the value ``val``. Has no effect if no project has been specified. :switch:`--subdirs={dir}` Use the ``dir`` subdirectory of the project's object directory (or the ``dir`` subdirectory of the project file directory if the project does not specify an object directory) for tool output files. Has no effect if you haven't specified a project and if you haven't specified the if :switch:`--no-objects-dir` switch. :switch:`--no-objects-dir` Place all the result files into the current directory (i.e., the directory from which the tool invocation command is issued) instead of the project's object directory. Has no effect if you haven't specified a project. :switch:`-eL` Follow all symbolic links when processing project files. If you specify a project file but neither a :switch:`-U` option, nor a :switch:`-U {main_unit}` option, nor any other explicit option to specify the source files, then the sources to be processed are the immediate sources of the specified project (i.e., the source files directly defined by that project, either implicitly by residing in the project source directories or explicitly through any of the source-related attributes). .. _Tool-specific_packages_in_project files: Tool-specific packages in project files --------------------------------------- Each project-aware tool may have a corresponding package in a project file; the package names are given elsewhere in this manual, in the sections that describe the respective tools. A tool-specific package in a project file may define the ``Default_Switches`` attribute indexed by "ada" (as language name). You set the value of this attribute to a list of switches that you want the tool to use when it's invoked. You cannot specify project-specific switches through this attribute.