TO39.fpGeda footprint file 'TO39.fp' converted by FritzingTO39.fp 0.4.0b.06.21.4282 27/06/2010 07:16:38 The JEDEC drawing shows a pin diameter of 16-21 mils ___x_ / \ TO39: |3 1| <-- bottom view (supposed to be a circle) \ 2 / --- NOTE: some vendors, ST for example, number the pins differently. Here we follow the JEDEC drawing. the pins are arranged along a 200 mil diameter circle. The can outline is 315 to 335 mils (320 nom) for the top of the can and 350 to 370 mils (360 nom) for the bottom edge of thecan tab is 29 to 40 mils long, 28 to 34 wide and comes off at an angle of 45 deg clockwise from pin 1 when looking at the top of the board x, y, width, height, start angle, delta angle, thickness GPL unlimited gEDA project http://www.gnu.org/licenses/gpl.html