TO18.fpGeda footprint file 'TO18.fp' converted by FritzingTO18.fp 0.4.0b.06.21.4282 27/06/2010 07:16:38 The JEDEC drawing shows a pin diameter of 16-21 mils ___x_ / \ TO18: |3 1| <-- bottom view (supposed to be a circle) \ 2 / --- NOTE: some vendors, ST for example, number the pins differently. Here we follow the JEDEC drawing. the pins are arranged along a 100 mil diameter circle. The can outline is 178 to 195 mils for the top of the can and 209 to 230 mils for the bottom edge of the can x, y, width, height, start angle, delta angle, thickness tab is 28 to 48 mils long, 36 to 46 wide and comes off at an angle of 45 deg clockwise from pin 1 when looking at the top of the board GPL unlimited gEDA project http://www.gnu.org/licenses/gpl.html