CANDK_ES01MSABE.fpGeda footprint file 'CANDK_ES01MSABE.fp' converted by FritzingCANDK_ES01MSABE.fp 0.4.0b.06.21.4282 27/06/2010 07:14:35 pad 1,2,3 width (1/100 mil) pad 1,2,3 length (1/100 mil) x value for pads 1,3 (1/100 mil) y value for pads 1,2,3 (1/100 mil) mounting pad width (1/100 mil) mounting pad length (1/100 mil) x value for the mounting pads (1/100 mil) y value for the mounting pads (1/100 mil) package width (1/100 mil) package height (1/100 mil) component veritcal height off board (1/100 mil) pad width and length y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) we need a line segment of length PADL - PADW so we have end points: 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) width of soldermask relief (5 mil on each side) top edge of switch body (1/100 mil) bottom edge of switch body (1/100 mil) how much the switch extends beyond the body y value for the far end of the switch silkscreen width (1/100 mils) how much space to leave around the part before the silk screen (1/100 mils) X values for silk on sides and bottom of switch bottom edge of the switch body bottom edge of upper pads bottom edge of the lower pads top edge of the switch body top edge of the switch Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] the signal pads the mounting pads Silk screen around package ElementLine[ x1 y1 x2 y2 width] bottom edge left/right top edge cross at top where switch moves GPL unlimited gEDA project http://www.gnu.org/licenses/gpl.html