Debian Codegraph @

raddb/mods-available/inner-eap

raw ◀ ▶
Source reconstructed at patch state 0 of 1 — not the installed (fully patched) source.
1 Debian patch touch this file
1 # -*- text -*-
2 #
3 # $Id: 576eb7739ebf18ca6323cb740a7d4278ff6d6ea2 $
4
5 #
6 # Sample configuration for an EAP module that occurs *inside*
7 # of a tunneled method. It is used to limit the EAP types that
8 # can occur inside of the inner tunnel.
9 #
10 # See also raddb/sites-available/inner-tunnel
11 #
12 # See raddb/mods-available/eap for full documentation on the meaning of these
13 # configuration entries.
14 #
15 eap inner-eap {
16 # This is the best choice for PEAP.
17 default_eap_type = mschapv2
18
19 timer_expire = 60
20
21 # This should be the same as the outer eap "max sessions"
22 max_sessions = 2048
23
24 # Supported EAP-types
25 md5 {
26 }
27
28 gtc {
29 # The default challenge, which many clients
30 # ignore..
31 #challenge = "Password: "
32
33 auth_type = PAP
34 }
35
36 mschapv2 {
37 # See eap for documentation
38 # send_error = no
39 }
40
41 # No TTLS or PEAP configuration should be listed here.
42
43 ## EAP-TLS
44 #
45 # You SHOULD use different certificates than are used
46 # for the outer EAP configuration!
47 #
48 # You can create the "inner-server.pem" file by doing:
49 #
50 # cd raddb/certs
51 # vi inner-server.cnf
52 # make inner-server
53 #
54 # The certificate MUST be different from the "server.cnf"
55 # file.
56 #
57 # Support for PEAP/TLS and RFC 5176 TLS/TLS is experimental.
58 # It might work, or it might not.
59 #
60 tls {
61 private_key_password = whatever
62 private_key_file = ${certdir}/inner-server.pem
63
64 # If Private key & Certificate are located in
65 # the same file, then private_key_file &
66 # certificate_file must contain the same file
67 # name.
68 #
69 # If ca_file (below) is not used, then the
70 # certificate_file below MUST include not
71 # only the server certificate, but ALSO all
72 # of the CA certificates used to sign the
73 # server certificate.
74 certificate_file = ${certdir}/inner-server.pem
75
76 # You may want different CAs for inner and outer
77 # certificates. If so, edit this file.
78 ca_file = ${cadir}/ca.pem
79
80 cipher_list = "DEFAULT"
81
82 # You may want to set a very small fragment size.
83 # The TLS data here needs to go inside of the
84 # outer EAP-TLS protocol.
85 #
86 # Try values and see if they work...
87 # fragment_size = 1024
88
89 # Other needful things
90 dh_file = ${certdir}/dh
91 random_file = /dev/urandom
92
93 # CRL and OCSP things go here. See the main "eap"
94 # file for details.
95 # check_crl = yes
96 # ca_path = /path/to/directory/with/ca_certs/and/crls/
97
98 # Accept an expired Certificate Revocation List
99 #
100 # allow_expired_crl = no
101
102 #
103 # The session resumption / fast re-authentication
104 # cache CANNOT be used for inner sessions.
105 #
106 }
107 }