General: UUID: "5528dd01-e009-4e88-8c71-d5e9bbe8f7f3" Author: "Jonas Bähr" License: "CC-BY-3.0" Name: "Aluminum (Soft Wrought Alloy)" Description: >- Prototype for various easy-to-machine wrought aluminium alloys. Surface speeds given for uncoated bits; coated bits can operate 50% faster. Surface speeds given for roughing with a width of cut less than half the bit's diameter. The same values can be used for slotting (woc <= D). For finishing with woc <= 0.1 * D carbide bits can operatre 2.2 times faster. NB: Specific alloys can deviate significantly! Source: Tabellenbuch Zerspantechnik, http://www.europa-lehrmittel.de/14733 Inherits: Aluminum: UUID: "d1f317f0-5ffa-4798-8ab3-af2ff0b5182c" Models: Father: UUID: '9cdda8b6-b606-4778-8f13-3934d8668e67' Father: "Metal" MaterialStandard: UUID: '1e2c0088-904a-4537-925f-64064c07d700' KindOfMaterial: "Aluminium" Machinability: UUID: '9d81fcb2-bf81-48e3-bb57-d45ecf380096' # ISBN 978-3-7585-1315-2, 5. Edition 2022, P. 272 # uncoated HSS, contour milling, roughing (woc: < 0.5 D, doc: < 1.5 D) SurfaceSpeedHSS: '120 m/min' # ISBN 978-3-7585-1315-2, 5. Edition 2022, P. 274 # uncoated carbide, contour milling, roughing (woc: < 0.5 D, doc: < 1.5 D) # under "favorable condition" 50% higher: 180 * 150% = 270 SurfaceSpeedCarbide: '270 m/min' # ISBN 978-3-7585-1315-2, 5. Edition 2022, P. 215 # Chip compression correction for milling, 1.2, already applied, # base rake angle transformed from gamma_0=12° (aluminium, cf. P. 216) to 0° # i.e. 470 * 1.2 / (1 - 12/100) is 641.909 UnitCuttingForce: '641 N/mm^2' ChipThicknessExponent: 0.27