DialogAnnotation Styles EditorAnnotation Styles EditorStyle nameTênThe name of your style. Existing style names can be edited.The name of your style. Existing style names can be edited.Add new...Add new...Renames the selected styleRenames the selected styleRenameĐổi tênDeletes the selected styleRenames the selected styleDeleteXóaImport styles from json fileImport styles from json fileExport styles to json fileExport styles to json fileTextVăn bảnThe font to use for texts and dimensionsThe font to use for texts and dimensionsFont nameTên phông chữThe font size in system unitsThe font size in system unitsThe line spacing (relative to the font size)The line spacing (relative to the font size)Lines and arrowsLines and arrowsShow lineShow lineThe width of the linesThe width of the lines px pxThe type of arrows or markers to use for dimensions and labelsThe type of arrows or markers to use for dimensions and labelsThe size of the arrows or markers in system unitsThe size of the arrows or markers in system unitsThe color of lines and arrowsThe color of lines and arrowsLine and arrow colorLine and arrow colorThe distance the dimension line is additionally extendedThe distance the dimension line is additionally extendedThe distance the extension lines are additionally extended beyond the dimension lineThe distance the extension lines are additionally extended beyond the dimension lineFont sizeCỡ phông chữLine spacingLine spacingThe color of texts, dimension texts and label textsThe color of texts, dimension texts and label textsText colorText colorUnitsĐơn vịA multiplier factor that affects the size of texts and markersA multiplier factor that affects the size of texts and markersScale multiplierScale multiplierIf it is checked it will show the unit next to the dimension valueIf it is checked it will show the unit next to the dimension valueShow unitShow unitSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitUnit overrideUnit overrideThe number of decimals to show for dimension valuesThe number of decimals to show for dimension valuesDecimalsDecimalsIf it is checked it will display the dimension lineIf it is checked it will display the dimension lineLine widthChiều rộng đường vẽArrow typeLoại mũi tênDotChấmCircleVòng trònArrowMũi tênTickĐánh dấuTick-2Đánh dấu-2Arrow sizeKích cỡ mũi tênDimension overshootDimension overshootThe length of the extension linesThe length of the extension linesExtension linesExtension linesExtension overshootExtension overshootDraftCircularArrayTaskPanelCircular arrayCircular array(Placeholder for the icon)(Placeholder for the icon)Distance from one layer of objects to the next layer of objects.Distance from one layer of objects to the next layer of objects.Radial distanceRadial distanceDistance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Tangential distanceTangential distanceNumber of circular layers or rings to create, including a copy of the original object.
It must be at least 2.Number of circular layers or rings to create, including a copy of the original object.
It must be at least 2.Number of circular layersNumber of circular layersThe number of symmetry lines in the circular array.The number of symmetry lines in the circular array.SymmetryĐối xứngThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Center of rotationCenter of rotationXXYYZZReset the coordinates of the center of rotation.Reset the coordinates of the center of rotation.Reset pointReset pointIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseHợp nhấtIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayLink arrayDraftOrthoArrayTaskPanelOrthogonal arrayOrthogonal array(Placeholder for the icon)(Placeholder for the icon)Number of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.Number of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.Number of elementsNumber of elementsXXYYZZDistance between the elements in the X direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the X direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.X intervalsKhoảng thời gianReset the distances.Reset the distances.Reset XĐặt lại XDistance between the elements in the Y direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the Y direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Y intervalsY intervalsReset YĐặt lại YDistance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Z intervalsZ intervalsReset ZĐặt lại ZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseHợp nhấtIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayLink arrayDraftPolarArrayTaskPanelPolar arrayPolar array(Placeholder for the icon)(Placeholder for the icon)Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Polar anglePolar angleNumber of elements in the array, including a copy of the original object.
It must be at least 2.Number of elements in the array, including a copy of the original object.
It must be at least 2.Number of elementsNumber of elementsThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Center of rotationCenter of rotationXXYYZZReset the coordinates of the center of rotation.Reset the coordinates of the center of rotation.Reset pointReset pointIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseHợp nhấtIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayLink arrayDraftShapeStringGuiShapeStringChuỗi tạo hìnhXXEnter coordinates or select point with mouse.Nhập tọa độ hoặc chọn điểm bằng chuột.YYZZReset 3d point selectionReset 3d point selectionReset PointĐặt lại điểmStringChuỗiText to be made into ShapeStringText to be made into ShapeStringHeightChiều caoHeight of the resultChiều cao của kết quảFont fileTập tin phông chữFormWorking plane setupCài đặt mặt phẳng làm việcSelect a face or working plane proxy or 3 vertices.
Or choose one of the options belowSelect a face or working plane proxy or 3 vertices.
Or choose one of the options belowSets the working plane to the XY plane (ground plane)Sets the working plane to the XY plane (ground plane)Top (XY)Top (XY)Sets the working plane to the XZ plane (front plane)Sets the working plane to the XZ plane (front plane)Front (XZ)Front (XZ)Sets the working plane to the YZ plane (side plane)Sets the working plane to the YZ plane (side plane)Side (YZ)Side (YZ)Sets the working plane facing the current viewSets the working plane facing the current viewAlign to viewAlign to viewThe working plane will align to the current
view each time a command is startedThe working plane will align to the current
view each time a command is startedAutomaticTự độngOffsetOffsetAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveCenter plane on viewMặt phẳng trung tâm trên chế độ xemOr select a single vertex to move the current
working plane without changing its orientation.
Then, press the button belowOr select a single vertex to move the current
working plane without changing its orientation.
Then, press the button belowMoves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the viewMoves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the viewMove working planeMove working planeThe spacing between the smaller grid linesThe spacing between the smaller grid linesGrid spacingKhoảng cách lướiThe number of squares between each main line of the gridThe number of squares between each main line of the gridMain line everyĐường chính của mỗiGrid extensionGrid extension lines đường thẳngThe distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawingThe distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawingSnapping radiusBán kính dínhCenters the view on the current working planeCenters the view on the current working planeCenter viewCenter viewResets the working plane to its previous positionResets the working plane to its previous positionPreviousPreviousStyle settingsStyle settingsFills the values below with a stored style presetFills the values below with a stored style presetLoad presetLoad presetSave current style as a preset...Save current style as a preset...Lines and facesLines and facesLine colorMàu đường vẽThe color of linesThe color of linesLine widthChiều rộng đường vẽ px pxDraw styleKiểu vẽThe line styleThe line styleSolidChất rắnDashedDashedDottedDottedDashDotNét chấmDisplay modeChế độ Hiển thịThe display mode for facesThe display mode for facesFlat LinesFlat LinesWireframeKhung dâyShadedBóng mờPointsĐiểmShape colorShape colorThe color of facesThe color of facesTransparencyTính trong suốtThe transparency of facesThe transparency of facesAnnotationsChú thíchText fontText fontThe font to use for texts and dimensionsThe font to use for texts and dimensionsText sizeText sizeThe size of texts and dimension textsThe size of texts and dimension textsText spacingKhoảng cách văn bảnThe space between the text and the dimension lineThe space between the text and the dimension lineText colorText colorThe color of texts and dimension textsThe color of texts and dimension textsLine spacingLine spacingThe spacing between different lines of textThe spacing between different lines of textArrow styleArrow styleThe type of dimension arrowsThe type of dimension arrowsDotChấmCircleVòng trònArrowMũi tênTickĐánh dấuTick-2Đánh dấu-2Arrow sizeKích cỡ mũi tênThe size of dimension arrowsThe size of dimension arrowsShow unitShow unitIf the unit suffix is shown on dimension texts or notIf the unit suffix is shown on dimension texts or notUnit overrideUnit overrideThe unit to use for dimensions. Leave blank to use current FreeCAD unitThe unit to use for dimensions. Leave blank to use current FreeCAD unitApply above style to selected object(s)Apply above style to selected object(s)SelectedĐã chọnHatchHatchPAT file:PAT file:pattern files (*.pat)pattern files (*.pat)Pattern:Pattern:Scale:Scale:Rotation:Xoay:Gui::Dialog::DlgSettingsDraftGeneral settingsCài đặt chungGeneral Draft SettingsCài đặt Sơ họa chungDefault working planeMặt phẳng làm việc mặc địnhNoneKhôngXY (Top)XY (Trên)XZ (Front)XZ (phía trước)YZ (Side)YZ (bên cạnh)Internal precision levelMức độ chính xác nội bộThe number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.ToleranceDung saiThis is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.This is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.Show groups in layers list drop-down buttonShow groups in layers list drop-down buttonDraft tools optionsDraft tools optionsWhen drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.When drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.Set focus on Length instead of X coordinateSet focus on Length instead of X coordinateNormally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.Normally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.Select base objects after copyingChọn đối tượng cơ sở sau khi sao chépIf this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19Set the Support property when possibleSet the Support property when possibleIf this is checked, objects will appear as filled by default.
Otherwise, they will appear as wireframeIf this is checked, objects will appear as filled by default.
Otherwise, they will appear as wireframeFill objects with faces whenever possibleĐiền các đối tượng với các bề mặt bất cứ khi nào có thểIf this is checked, copy mode will be kept across command,
otherwise commands will always start in no-copy modeIf this is checked, copy mode will be kept across command,
otherwise commands will always start in no-copy modeGlobal copy modeChế độ sao chép toàn bộForce Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.Force Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.Use Part Primitives when availableSử dụng các đối tượng Phần khi có thểPrefix labels of Clones with:Nhãn tiền tố của các bản sao với:Construction GeometryXây dựng hình họcConstruction group nameTên nhóm xây dựngThis is the default group name for construction geometryĐây là tên nhóm mặc định cho hình học xây dựngConstructionXây dựngConstruction geometry colorMàu hình học xây dựngThis is the default color for objects being drawn while in construction mode.Đây là màu mặc định cho các đối tượng được vẽ trong khi ở chế độ xây dựng.Visual settingsCài đặt hình ảnhVisual SettingsCài đặt hình ảnhSnap symbols styleChọn kiểu biểu tượngDraft classic styleKiểu sơ họa cổ điểnBitsnpieces styleKiểu BitsnpiecesColorMàuThe default color for snap symbolsMàu mặc định cho các biểu tượng bắt điểmCheck this if you want to use the color/linewidth from the toolbar as defaultKiểm tra điều này nếu bạn muốn sử dụng màu / bề rộng đường từ thanh công cụ làm mặc địnhSave current color and linewidth across sessionsLưu màu và độ rộng đường vẽ hiện tại qua các tác vụIf checked, a widget indicating the current working plane orientation appears during drawing operationsNếu được chọn, hiển thị tiện ích cho biết hướng của mặt phẳng công việc hiện tại trong quá trình vẽShow Working Plane trackerHiển thị trình theo dõi mặt cắt làm việcDefault template sheetTrang mẫu mặc địnhThe default template to use when creating a new drawing sheetMẫu mặc định để sử dụng khi tạo bản vẽ mớiAlternate SVG patterns locationAlternate SVG patterns locationHere you can specify a directory with custom SVG files containing <pattern> definitions to be added to the standard patternsHere you can specify a directory with custom SVG files containing <pattern> definitions to be added to the standard patternsSVG pattern resolutionSVG pattern resolutionThe resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing fasterThe resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing fasterSVG pattern default sizeSVG pattern default sizeThe default size for SVG patternsThe default size for SVG patternsCheck this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only)Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only)Preserve colors of faces during downgrade/upgradePreserve colors of faces during downgrade/upgradeCheck this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only)Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only)Preserve names of faces during downgrade/upgradePreserve names of faces during downgrade/upgradeDrawing view line definitionsĐịnh nghĩa đường ngắmDashed line definitionĐịnh nghĩa đường nét đứtAn SVG linestyle definitionMột định nghĩa kiểu đường SVGDashdot line definitionĐịnh nghĩa đường chấm kẻDotted line definitionĐịnh nghĩa đường chấm chấmTexts and dimensionsVăn bản và kích thướcText settingsCài đặt văn bảnFont familyHọ phông chữThis is the default font name for all Draft texts and dimensions.
It can be a font name such as "Arial", a default style such as "sans", "serif"
or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style
such as "Arial:Bold"Đây là tên phông chữ mặc định cho tất cả các văn bản và kích thước Sơ họa.
Nó có thể là tên phông chữ như "Arial", một kiểu mặc định như "sans", "serif" hoặc "mono" hoặc họ như "Arial, Helvetica, sans" hoặc tên có kiểu như "Arial: Bold"Internal fontPhông chữ bên trongFont sizeCỡ phông chữDefault height for texts and dimensionsChiều cao mặc định cho văn bản và kích thướcmmmmDimension settingsCài đặt kích thướcDisplay modeChế độ Hiển thịWorldThế giớiScreenScreenNumber of decimalsSố chữ thập phânExtension lines sizeKích thước đường dây mở rộngThe default size of dimensions extension linesKích thước mặc định của đường kích thước mở rộngExtension line overshootĐã vượt quá giới hạn đườngThe default length of extension line above dimension lineĐộ dài mặc định của đường kéo dài ở trên đường kích thướcDimension line overshootĐã vượt quá giới hạn đường kích thướcThe default distance the dimension line is extended past extension linesKhoảng cách đường kích thước được kéo dài qua các đường mở rộngArrows styleKiểu mũi tênDotChấmCircleVòng trònArrowMũi tênTickĐánh dấuTick-2Đánh dấu-2Arrows sizeKích cỡ mũi tênThe default size of arrowsKích thước mặc định của mũi tênText orientationĐịnh hướng văn bảnThis is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard.Đây là hướng của văn bản thứ nguyên khi các thứ nguyên đó theo chiều dọc. Mặc định bên trái, đó là tiêu chuẩn ISO.Left (ISO standard)Bên trái (tiêu chuẩn ISO)RightPhảiText spacingKhoảng cách văn bảnThe space between the dimension line and the dimension textKhoảng cách giữa đường kích thước và chữ trên đường kích thướcShow the unit suffix in dimensionsHiển thị đơn vị hậu tố trong kích thướcOverride unitOverride unitBy leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit.By leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit.ShapeString settingsCài đặt Chữ tạo hìnhDefault ShapeString font fileTệp phông chữ của chữ tạo hình mặc địnhSelect a font fileChọn một tệp phông chữSVGSVGImport styleKiểu nhậpMethod chosen for importing SVG object color to FreeCADMethod chosen for importing SVG object color to FreeCADNone (fastest)Không (nhanh nhất)Use default color and linewidthSử dụng màu và độ rộng đường vẽ mặc địnhOriginal color and linewidthMàu gốc và độ rộng đường vẽIf checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter. If checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter. Disable units scalingTắt chia tỷ lệ đơn vịExport styleKiểu xuấtStyle of SVG file to write when exporting a sketchStyle of SVG file to write when exporting a sketchTranslated (for print & display)Đã dịch (để in và hiển thị)Raw (for CAM)Thô (đối với CAM)All white lines will appear in black in the SVG for better readability against white backgroundsAll white lines will appear in black in the SVG for better readability against white backgroundsTranslate white line color to blackDịch đường màu trắng thành màu đenMax segment length for discretized arcsĐộ dài phân đoạn tối đa cho các cung tròn được chọnVersions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length. Versions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length. OCAOCACheck this if you want the areas (3D faces) to be imported too.Kiểm tra điều này nếu bạn muốn các khu vực (bề mặt 3D) cũng được nhập.Import OCA areasNhập khu vực OCADXFDXFThis preferences dialog will be shown when importing/ exporting DXF filesThis preferences dialog will be shown when importing/ exporting DXF filesShow this dialog when importing and exportingHiển thị hộp thoại này khi nhập và xuấtPython importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yetPython importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yetUse legacy python importerSử dụng một trình nhập python cũPython exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yetPython exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yetUse legacy python exporterSử dụng một trình xuất python cũAutomatic update (legacy importer only)Cập nhật tự động (chỉ dành cho trình nhập cũ)Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.Allow FreeCAD to automatically download and update the DXF librariesCho phép FreeCAD để tự động tải xuống và cập nhật các thư viện DXFImport optionsTùy chọn nhập khẩuNote: Not all the options below are used by the new importer yetLưu ý: Không phải tất cả các tùy chọn bên dưới đều được trình nhập mới sử dụngImportNhậpIf unchecked, texts and mtexts won't be importedIf unchecked, texts and mtexts won't be importedtexts and dimensionsvăn bản và kích thướcIf unchecked, points won't be importedIf unchecked, points won't be importedpointsđiểmIf checked, paper space objects will be imported tooIf checked, paper space objects will be imported toolayoutsbố cụcIf you want the non-named blocks (beginning with a *) to be imported tooIf you want the non-named blocks (beginning with a *) to be imported too*blocks* khốiCreateTạoOnly standard Part objects will be created (fastest)Only standard Part objects will be created (fastest)simple Part shapescác hình Phần đơn giảnParametric Draft objects will be created whenever possibleParametric Draft objects will be created whenever possibleDraft objectsCác đối tượng Sơ họaSketches will be created whenever possibleSketches will be created whenever possibleSketchesBản phác họaScale factor to apply to imported filesYếu tố tỷ lệ áp dụng cho các tệp được nhậpScale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8Scale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied. Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied. Get original colors from the DXF fileNhận các màu gốc từ tập tin DXFFreeCAD will try to join coincident objects into wires.
Note that this can take a while!FreeCAD will try to join coincident objects into wires.
Note that this can take a while!Join geometryTham gia vào hìnhObjects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable Group layers into blocksNhóm các lớp thành các khốiImported texts will get the standard Draft Text size,
instead of the size they have in the DXF documentImported texts will get the standard Draft Text size,
instead of the size they have in the DXF documentUse standard font size for textsSử dụng kích thước phông chữ chuẩn cho văn bảnIf this is checked, DXF layers will be imported as Draft LayersIf this is checked, DXF layers will be imported as Draft LayersUse LayersUse LayersHatches will be converted into simple wiresHatches will be converted into simple wiresImport hatch boundaries as wiresNhập các đường bao quanh hatch tô vật liệu như là các dâyIf polylines have a width defined, they will be rendered
as closed wires with correct widthIf polylines have a width defined, they will be rendered
as closed wires with correct widthRender polylines with widthTrả lại các ô vuông với bề rộng ban đầu của chúngEllipse export is poorly supported. Use this to export them as polylines instead.Ellipse export is poorly supported. Use this to export them as polylines instead.Treat ellipses and splines as polylinesCoi hình elip và splines như là polylinesMax Spline Segment:Đoạn Spline tối đa:Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.Export optionsTuỳ chọn xuấtAll objects containing faces will be exported as 3D polyfacesAll objects containing faces will be exported as 3D polyfacesExport 3D objects as polyface meshesXuất các đối tượng 3D thành các lưới đa giácDrawing Views will be exported as blocks.
This might fail for post DXF R12 templates.Drawing Views will be exported as blocks.
This might fail for post DXF R12 templates.Export Drawing Views as blocksXuất chế độ xem bản vẽ dưới dạng khóaExported objects will be projected to reflect the current view directionExported objects will be projected to reflect the current view directionProject exported objects along current view directionChiếu các đối tượng được xuất theo hướng xem hiện tạiGrid and snappingLưới và bắt điểmSnappingChế độ bắt điểmIf this is checked, snapping is activated without the need to press the snap mod keyNếu chọn ô này, việc bắt điểm được kích hoạt mà không cần nhấn phím bắt điểmAlways snap (disable snap mod)Luôn bắt điểm (hủy chế độ bắt điểm)Constrain modChế độ hạn chếThe Constraining modifier keyPhím sửa đổi hạn chếShiftShiftCtrlCtrlAltAltSnap modChế độ bắt điểmThe snap modifier keyPhím bổ trợ bắt điểmAlt modChế độ AltThe Alt modifier keyPhím bổ trợ AltIf checked, the Snap toolbar will be shown whenever you use snappingNếu chọn ô này, thanh công cụ Bắt điểm sẽ được hiển thị bất cứ khi nào bạn sử dụng tính năng nàyShow Draft Snap toolbarHiển thị thanh công cụ Bắt điểm sơ họaHide Draft snap toolbar after useẨn thanh công cụ bắt điểm sơ họa sau khi sử dụngGridLướiIf checked, a grid will appear when drawingNếu chọn ô này, một lưới sẽ xuất hiện khi đang vẽUse gridSử dụng lướiIf checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a commandNếu chọn ô này, lưới Sơ họa sẽ luôn hiển thị khi Bàn làm việc Sơ họa đang hoạt động. Nếu không thì chỉ hiển thị khi sử dụng một lệnhAlways show the gridLuôn hiển thị lướiIf checked, an additional border is displayed around the grid, showing the main square size in the bottom left borderIf checked, an additional border is displayed around the grid, showing the main square size in the bottom left borderShow grid borderShow grid border<html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if "Show grid border" option is enabled.</p></body></html><html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if "Show grid border" option is enabled.</p></body></html>Show human figureShow human figureIf set, the grid will have its two main axes colored in red, green or blue when they match global axesIf set, the grid will have its two main axes colored in red, green or blue when they match global axesUse colored axesUse colored axesMain lines everyPhân chia đường lưới chínhMainlines will be drawn thicker. Specify here how many squares between mainlines.Các đường chính sẽ được vẽ dày hơn. Chỉ định ở đây có bao nhiêu ô vuông giữa các đường chính.Grid spacingKhoảng cách lướiThe spacing between each grid lineKhoảng cách giữa các đường mắt lướiGrid sizeKích thước lướiThe number of horizontal or vertical lines of the gridSố lượng các đường ngang hoặc dọc của lưới lines đường thẳngGrid color and transparencyGrid color and transparencyThe color of the gridThe color of the gridThe overall transparency of the gridThe overall transparency of the gridDraft Edit preferencesDraft Edit preferencesEditChỉnh sửaMaximum number of contemporary edited objectsMaximum number of contemporary edited objects<html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html><html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html>Draft edit pick radiusDraft edit pick radiusControls pick radius of edit nodesControls pick radius of edit nodesDWGDWGDWG conversionChuyển đổi DWGConversion method:Conversion method:This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.AutomaticTự độngLibreDWGLibreDWGODA ConverterODA ConverterQCAD proQCAD proPath to file converterPath to file converterThe path to your DWG file converter executableThe path to your DWG file converter executable<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html><html><head/><body><p><span style=" font-weight:600;">Ghi chú:</span> Các tùy chọn DXF cũng được dùng để áp dụng cho các tệp DWG.</p></body></html>User interface settingsUser interface settingsIn-Command ShortcutsIn-Command ShortcutsRelativeTương đốiRRContinueTiếp tụcTTCloseĐóngOOCopySao chépPPSubelement ModeChế độ phần tử conDDFillĐiền vàoLLExitThoátAASelect EdgeChọn cạnhEEAdd HoldThêm lỗQQLengthChiều dàiHHWipeXóa dữ liệuWWSet WPThiết lập WPUUCycle SnapCycle SnapGlobalChungGGUndoUndoSnapDínhSSIncrease RadiusTăng bán kínhDecrease RadiusGiảm bán kínhRestrict XGiới hạn XXXRestrict YGiới hạn YYYRestrict ZGiới hạn ZZZDraft StatusbarDraft StatusbarEnable snap statusbar widgetEnable snap statusbar widgetDraft snap widgetDraft snap widgetEnable draft statusbar annotation scale widgetEnable draft statusbar annotation scale widgetAnnotation scale widgetAnnotation scale widgetdraftRelativeTương đốiGlobalChungContinueTiếp tụcCloseĐóngCopySao chépSubelement modeSubelement modeFillĐiền vàoExitThoátSnap On/OffSnap On/OffIncrease snap radiusIncrease snap radiusDecrease snap radiusDecrease snap radiusRestrict XGiới hạn XRestrict YGiới hạn YRestrict ZGiới hạn ZSelect edgeSelect edgeAdd custom snap pointAdd custom snap pointLength modeLength modeWipeXóa dữ liệuSet Working PlaneThiết lập mặt phẳng làm việcCycle snap objectCycle snap objectUndo last segmentUndo last segmentTopĐỉnhFrontPhía trướcSideCạnhAutoTự độngNoneKhôngactive command:active command:Active Draft commandActive Draft commandX coordinate of next pointX coordinate of next pointXXYYZZY coordinate of next pointY coordinate of next pointZ coordinate of next pointZ coordinate of next pointEnter pointEnter pointEnter a new point with the given coordinatesEnter a new point with the given coordinatesLengthChiều dàiAngleGócLength of current segmentLength of current segmentAngle of current segmentAngle of current segmentCheck this to lock the current angleCheck this to lock the current angleRadiusBán kínhRadius of CircleRadius of CircleCoordinates relative to last point or to coordinate system origin
if is the first point to setCoordinates relative to last point or to coordinate system origin
if is the first point to setCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemFilledFilledCheck this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabledCheck this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabledFinishHoàn tấtFinishes the current drawing or editing operationFinishes the current drawing or editing operationIf checked, command will not finish until you press the command button againIf checked, command will not finish until you press the command button againIf checked, an OCC-style offset will be performed instead of the classic offsetIf checked, an OCC-style offset will be performed instead of the classic offset&OCC-style offset&OCC-style offset&Undo&Hoàn tácUndo the last segmentUndo the last segmentFinishes and closes the current lineFinishes and closes the current lineWipes the existing segments of this line and starts again from the last pointWipes the existing segments of this line and starts again from the last pointSet WPThiết lập WPReorients the working plane on the last segmentReorients the working plane on the last segmentSelects an existing edge to be measured by this dimensionSelects an existing edge to be measured by this dimensionSidesSidesNumber of sidesNumber of sidesIf checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commandsIf checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commandsModify subelementsModify subelementsIf checked, subelements will be modified instead of entire objectsIf checked, subelements will be modified instead of entire objectsText string to drawText string to drawStringChuỗiHeight of textHeight of textHeightChiều caoIntercharacter spacingIntercharacter spacingTrackingTheo dõiFull path to font file:Full path to font file:Open a FileChooser for font fileOpen a FileChooser for font fileCreate textCreate textPress this button to create the text object, or finish your text with two blank linesPress this button to create the text object, or finish your text with two blank linesCurrent working planeCurrent working planeChange default style for new objectsChange default style for new objectsToggle construction modeToggle construction modeAutogroup offAutogroup offLineĐường thẳngDWireDWireCircleVòng trònArcVòng cungRotateXoayPointĐiểmLabelNhãnOffsetOffsetDistanceDistanceOffset distanceOffset distanceTrimexTrimexLocal u0394XLocal u0394XLocal u0394YLocal u0394YLocal u0394ZLocal u0394ZLocal XLocal XLocal YLocal YLocal ZLocal ZGlobal u0394XGlobal u0394XGlobal u0394YGlobal u0394YGlobal u0394ZGlobal u0394ZGlobal XTổng thể XGlobal YTổng thể YGlobal ZTổng thể ZInvalid Size value. Using 200.0.Invalid Size value. Using 200.0.Invalid Tracking value. Using 0.Invalid Tracking value. Using 0.Please enter a text string.Please enter a text string.Select a Font fileSelect a Font filePlease enter a font file.Please enter a font file.Autogroup:Autogroup:FacesBề mặtRemoveXóa bỏAddThêm mớiFacebinder elementsFacebinder elementsDraftMớn nước của tàuLibreDWG errorLibreDWG errorConverting:Converting:Conversion successfulConversion successfulError during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.ODA File Converter not foundODA File Converter not foundQCAD errorQCAD errorAll Shapes must be coplanarAll Shapes must be coplanarSelected Shapes must define a planeSelected Shapes must define a planeThe DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either enable FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either enable FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.CustomTùy chọnUnable to convert input into a scale factorUnable to convert input into a scale factorSet custom scaleSet custom scaleSet custom annotation scale in format x:x, x=xSet custom annotation scale in format x:x, x=xSet the scale used by draft annotation toolsSet the scale used by draft annotation toolsNo active document. Aborting.No active document. Aborting.Wrong input: object not in document.Wrong input: object not in document.No graphical interfaceNo graphical interfaceUnable to insert new object into a scaled partUnable to insert new object into a scaled partSymbol not implemented. Using a default symbol.Symbol not implemented. Using a default symbol.Visibility off; removed from list: Visibility off; removed from list: image is Nullimage is Nullfilename does not exist on the system or in the resource filefilename does not exist on the system or in the resource fileunable to load textureunable to load textureDoes not have 'ViewObject.RootNode'.Does not have 'ViewObject.RootNode'.Solids:Solids:Faces:Mặt:Wires:Wires:Edges:Edges:Vertices:Vertices:FaceMặtWireDâydifferent typesdifferent typesObjects have different placements. Distance between the two base points: Objects have different placements. Distance between the two base points: has a different valuehas a different valuedoesn't exist in one of the objectsdoesn't exist in one of the objects%s shares a base with %d other objects. Please check if you want to modify this.%s shares a base with %d other objects. Please check if you want to modify this.%s cannot be modified because its placement is readonly.%s cannot be modified because its placement is readonly.Wrong input: unknown document.Wrong input: unknown document.This function will be deprecated in This function will be deprecated in Please use Please use This function will be deprecated. This function will be deprecated. Pick a face, 3 vertices or a WP Proxy to define the drawing planePick a face, 3 vertices or a WP Proxy to define the drawing planeWorking plane aligned to global placement ofWorking plane aligned to global placement ofDirDirPlease select exactly two objects, the base object and the path object, before calling this command.Please select exactly two objects, the base object and the path object, before calling this command.Path arrayPath arrayPick target pointPick target pointCreate LabelCreate LabelPick endpoint of leader linePick endpoint of leader linePick text positionPick text positionPick first pointPick first pointCreate LineCreate LineCreate WireCreate WirePick next pointPick next pointUnable to create a Wire from selected objectsUnable to create a Wire from selected objectsConvert to WireConvert to WireSelect an object to joinSelect an object to joinJoin linesJoin linesSelection:Lựa chọn:Pick location pointPick location pointCreate TextCreate TextSelect an object to convert.Select an object to convert.Convert to SketchConvert to SketchConvert to DraftConvert to DraftConvert Draft/SketchConvert Draft/SketchSelect an object to moveSelect an object to movePick start pointPick start pointPick end pointPick end pointMoveDi chuyểnSome subelements could not be moved.Some subelements could not be moved.Pick center pointPick center pointPick radiusPick radiusStart angleStart anglePick start anglePick start angleAperture angleAperture anglePick aperturePick apertureCreate Circle (Part)Create Circle (Part)Create CircleCreate CircleCreate Arc (Part)Create Arc (Part)Create ArcCreate ArcPick aperture anglePick aperture angleArc by 3 pointsArc by 3 pointsToggle gridToggle gridSelect an object to editSelect an object to editSelect a Draft object to editSelect a Draft object to editEdit nodeEdit nodeNo edit point found for selected objectNo edit point found for selected objectToo many objects selected, max number set to:Too many objects selected, max number set to:: this object is not editable: this object is not editableAnnotation style editorAnnotation style editorOpen styles fileOpen styles fileJSON file (*.json)JSON file (*.json)Save styles fileSave styles fileThe Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead.The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead.Select an object to projectSelect an object to projectCreate PointCreate PointSelect an object to rotateSelect an object to rotatePick rotation centerPick rotation centerBase angleBase angleThe base angle you wish to start the rotation fromThe base angle you wish to start the rotation fromPick base anglePick base angleRotationRotationThe amount of rotation you wish to perform.
The final angle will be the base angle plus this amount.The amount of rotation you wish to perform.
The final angle will be the base angle plus this amount.Pick rotation anglePick rotation angleAdd to groupAdd to groupUngroupUngroupAdd new groupAdd new groupSelect groupSelect groupNo new selection. You must select non-empty groups or objects inside groups.No new selection. You must select non-empty groups or objects inside groups.AutogroupAutogroupAdd new LayerAdd new LayerAdd to construction groupAdd to construction groupAdd a new group with a given nameAdd a new group with a given nameAdd groupAdd groupGroup nameGroup nameGroupNhómFlip dimensionFlip dimensionSketch is too complex to edit: it is suggested to use sketcher default editorSketch is too complex to edit: it is suggested to use sketcher default editorFillet radiusFillet radiusRadius of filletRadius of filletEnter radius.Enter radius.Delete original objects:Delete original objects:Chamfer mode:Chamfer mode:Two elements needed.Two elements needed.Test objectTest objectTest object removedTest object removedFillet cannot be createdFillet cannot be createdCreate filletTạo đường gờCreate Polygon (Part)Create Polygon (Part)Create PolygonCreate PolygonClick anywhere on a line to split it.Click anywhere on a line to split it.Split lineSplit lineSelect objects to trim or extendSelect objects to trim or extendPick distancePick distanceOffset angleOffset angleUnable to trim these objects, only Draft wires and arcs are supported.Unable to trim these objects, only Draft wires and arcs are supported.Unable to trim these objects, too many wiresUnable to trim these objects, too many wiresThese objects don't intersect.These objects don't intersect.Too many intersection points.Too many intersection points.Spline has been closedSpline has been closedLast point has been removedLast point has been removedCreate B-splineTạo đường cong B-splineChange StyleChange StyleThis object does not support possible coincident points, please try again.This object does not support possible coincident points, please try again.Delete pointDelete pointAdd pointAdd pointOpen wireOpen wireClose wireĐóng dâyReverse wireReverse wireActive object must have more than two points/nodesActive object must have more than two points/nodesOpen splineOpen splineClose splineClose splineReverse splineReverse splineMove arcMove arcSet first angleSet first angleSet last angleSet last angleSet radiusSet radiusInvert arcInvert arcMake sharpMake sharpMake tangentMake tangentMake symmetricMake symmetricReverse curveReverse curveOpen curveOpen curveClose curveClose curveSelection is not a KnotSelection is not a KnotEndpoint of BezCurve can't be smoothedEndpoint of BezCurve can't be smoothedBézier curve has been closedBézier curve has been closedCreate BezCurveCreate BezCurveClick and drag to define next knotClick and drag to define next knotCreate EllipseCreate EllipsePick opposite pointPick opposite pointSelect faces from existing objectsSelect faces from existing objectsSelect an object to scaleSelect an object to scalePick base pointPick base pointPick reference distance from base pointPick reference distance from base pointScaleKích cỡSome subelements could not be scaled.Some subelements could not be scaled.Unable to scale object:Unable to scale object:Unable to scale objects:Unable to scale objects:This object type cannot be scaled directly. Please use the clone method.This object type cannot be scaled directly. Please use the clone method.Pick new distance from base pointPick new distance from base pointLayerLayerPlease select exactly two objects, the base object and the point object, before calling this command.Please select exactly two objects, the base object and the point object, before calling this command.Point arrayPoint arrayNo active Draft Toolbar.No active Draft Toolbar.Construction modeConstruction modeContinue modeContinue modeToggle display modeToggle display modeCreate DimensionCreate DimensionCreate Dimension (radial)Create Dimension (radial)Edge too short!Edge too short!Edges don't intersect!Edges don't intersect!Select an object to stretchSelect an object to stretchPick first point of selection rectanglePick first point of selection rectanglePick opposite point of selection rectanglePick opposite point of selection rectanglePick start point of displacementPick start point of displacementPick end point of displacementPick end point of displacementTurning one Rectangle into a WireTurning one Rectangle into a WireStretchStretchCreate PlaneCreate PlaneCreate RectangleCreate RectangleSelect an object to mirrorSelect an object to mirrorPick start point of mirror linePick start point of mirror lineMirrorMirrorPick end point of mirror linePick end point of mirror linePath twisted arrayPath twisted arraySelect an object to cloneSelect an object to cloneChange slopeChange slopeSelect an object to upgradeSelect an object to upgradeUpgradeUpgradeSelect an object to offsetSelect an object to offsetOffset only works on one object at a time.Offset only works on one object at a time.Cannot offset this object typeCannot offset this object typeOffset of Bezier curves is currently not supportedOffset of Bezier curves is currently not supportedCreate 2D viewCreate 2D viewPick ShapeString location pointPick ShapeString location pointCreate ShapeStringCreate ShapeStringHealHealDowngradeDowngradeSelect an object to arraySelect an object to arrayArrayArrayTask panel:Task panel:Polar arrayPolar arrayAt least one element must be selected.At least one element must be selected.Selection is not suitable for array.Selection is not suitable for array.Object:Object:Number of elements must be at least 2.Number of elements must be at least 2.The angle is above 360 degrees. It is set to this value to proceed.The angle is above 360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.Center reset:Center reset:Fuse:Fuse:Create Link array:Create Link array:Number of elements:Number of elements:Polar angle:Polar angle:Center of rotation:Center of rotation:Aborted:Aborted:Orthogonal arrayOrthogonal arrayNumber of elements must be at least 1.Number of elements must be at least 1.Interval X reset:Interval X reset:Interval Y reset:Interval Y reset:Interval Z reset:Interval Z reset:Number of X elements:Number of X elements:Interval X:Interval X:Number of Y elements:Number of Y elements:Interval Y:Interval Y:Number of Z elements:Number of Z elements:Interval Z:Interval Z:ShapeStringChuỗi tạo hìnhDefaultMặc địnhCircular arrayCircular arrayNumber of layers must be at least 2.Number of layers must be at least 2.Radial distance is zero. Resulting array may not look correct.Radial distance is zero. Resulting array may not look correct.Radial distance is negative. It is made positive to proceed.Radial distance is negative. It is made positive to proceed.Tangential distance cannot be zero.Tangential distance cannot be zero.Tangential distance is negative. It is made positive to proceed.Tangential distance is negative. It is made positive to proceed.Radial distance:Radial distance:Tangential distance:Tangential distance:Number of circular layers:Number of circular layers:Symmetry parameter:Symmetry parameter:ShapeString: string has no wiresShapeString: string has no wiresadded view property 'ScaleMultiplier'added view property 'ScaleMultiplier'added view property 'AnnotationStyle'added view property 'AnnotationStyle', path object doesn't have 'Edges'., path object doesn't have 'Edges'.'PathObj' property will be migrated to 'PathObject''PathObj' property will be migrated to 'PathObject'Length of tangent vector is zero. Copy not aligned.Length of tangent vector is zero. Copy not aligned.Length of normal vector is zero. Using a default axis instead.Length of normal vector is zero. Using a default axis instead.Tangent and normal vectors are parallel. Normal replaced by a default axis.Tangent and normal vectors are parallel. Normal replaced by a default axis.Cannot calculate normal vector. Using the default normal instead.Cannot calculate normal vector. Using the default normal instead.AlignMode {} is not implementedAlignMode {} is not implementedadded property 'ExtraPlacement'added property 'ExtraPlacement'No shape foundNo shape foundAll Shapes must be planarAll Shapes must be planarlength:length:Two elements are needed.Two elements are needed.Radius is too largeRadius is too largeSegmentPhân đoạnRemoved original objects.Removed original objects.Points:Points:Wrong input: must be list or tuple of three points exactly.Wrong input: must be list or tuple of three points exactly.Placement:Placement:Wrong input: incorrect type of placement.Wrong input: incorrect type of placement.Wrong input: incorrect type of points.Wrong input: incorrect type of points.Cannot generate shape:Cannot generate shape:Radius:Bán kính:Center:Tâm:Create primitive objectCreate primitive objectFinal placement:Final placement:Face: TrueFace: TrueSupport:Support:Map mode:Map mode:Wrong input: must be a number.Wrong input: must be a number.Wrong input: must be a vector.Wrong input: must be a vector.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Internal orthogonal arrayInternal orthogonal arrayWrong input: must be a number or vector.Wrong input: must be a number or vector.Input: single value expanded to vector.Input: single value expanded to vector.Wrong input: must be an integer number.Wrong input: must be an integer number.Input: number of elements must be at least 1. It is set to 1.Input: number of elements must be at least 1. It is set to 1.Orthogonal array 2DOrthogonal array 2DRectangular arrayDãy hình chữ nhậtRectangular array 2DRectangular array 2DWrong input: must be a placement, a vector, or a rotation.Wrong input: must be a placement, a vector, or a rotation.Wrong input: object must not be a list.Wrong input: object must not be a list.Wrong input: subelement not in object.Wrong input: subelement not in object.Wrong input: label_type must be a string.Wrong input: label_type must be a string.Wrong input: label_type must be one of the following: Wrong input: label_type must be one of the following: Wrong input: must be a list of strings or a single string.Wrong input: must be a list of strings or a single string.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: must be a list of at least two vectors.Wrong input: must be a list of at least two vectors.Direction is not 'Custom'; points won't be used.Direction is not 'Custom'; points won't be used.Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: object has the wrong type.Wrong input: object has the wrong type.This function is deprecated. Do not use this function directly.This function is deprecated. Do not use this function directly.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Wrong input: object doesn't have a 'Shape' to measure.Wrong input: object doesn't have a 'Shape' to measure.Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.Wrong input: must be an integer.Wrong input: must be an integer.i1: values below 1 are not allowed; will be set to 1.i1: values below 1 are not allowed; will be set to 1.Wrong input: vertex not in object.Wrong input: vertex not in object.i2: values below 1 are not allowed; will be set to the last vertex in the object.i2: values below 1 are not allowed; will be set to the last vertex in the object.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.index: values below 1 are not allowed; will be set to 1.index: values below 1 are not allowed; will be set to 1.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to a circular edge.Wrong input: index doesn't correspond to a circular edge.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a list with two angles.Wrong input: must be a list with two angles.Wrong input: must be a number or quantity.Wrong input: must be a number or quantity.LayersLayersWrong input: it must be a string.Wrong input: it must be a string.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be a number between 0 and 100.Wrong input: must be a number between 0 and 100.Activate this layerActivate this layerSelect layer contentsSelect layer contentsMerge layer duplicatesMerge layer duplicatesAdd new layerAdd new layerRelabeling layer:Relabeling layer:Merging layer:Merging layer:EditChỉnh sửaFlattenFlattenUpgrade: Unknown force method:Upgrade: Unknown force method:Found 1 block: exploding itFound 1 block: exploding itFound 1 multi-solids compound: exploding itFound 1 multi-solids compound: exploding itFound 1 parametric object: breaking its dependenciesFound 1 parametric object: breaking its dependenciesFound 2 objects: subtracting themFound 2 objects: subtracting themFound several faces: splitting themFound several faces: splitting themFound several objects: subtracting them from the first oneFound several objects: subtracting them from the first oneFound 1 face: extracting its wiresFound 1 face: extracting its wiresFound only wires: extracting their edgesFound only wires: extracting their edgesNo more downgrade possibleNo more downgrade possibleNo object givenNo object givenThe two points are coincidentThe two points are coincidentmirroredmirroredObject must be a closed shapeObject must be a closed shapeNo solid object createdNo solid object createdFaces must be coplanar to be refinedFaces must be coplanar to be refinedFound groups: closing each open object insideFound groups: closing each open object insideFound meshes: turning into Part shapesFound meshes: turning into Part shapesFound 1 solidifiable object: solidifying itFound 1 solidifiable object: solidifying itFound 2 objects: fusing themFound 2 objects: fusing themFound object with several coplanar faces: refine themFound object with several coplanar faces: refine themFound 1 non-parametric objects: draftifying itFound 1 non-parametric objects: draftifying itFound 1 closed sketch object: creating a face from itFound 1 closed sketch object: creating a face from itFound closed wires: creating facesFound closed wires: creating facesFound several wires or edges: wiring themFound several wires or edges: wiring themFound several non-treatable objects: creating compoundFound several non-treatable objects: creating compoundtrying: closing ittrying: closing itFound 1 open wire: closing itFound 1 open wire: closing itFound 1 object: draftifying itFound 1 object: draftifying itFound points: creating compoundFound points: creating compoundUnable to upgrade these objects.Unable to upgrade these objects.TextVăn bảnadded view property 'TextColor'added view property 'TextColor'renamed 'DisplayMode' options to 'World/Screen'renamed 'DisplayMode' options to 'World/Screen'renamed view property 'TextFont' to 'FontName'renamed view property 'TextFont' to 'FontName'renamed view property 'TextSize' to 'FontSize'renamed view property 'TextSize' to 'FontSize'added missing view propertiesadded missing view propertiesadded property 'Count'added property 'Count'WorkbenchDraft creation toolsDraft creation toolsDraft annotation toolsDraft annotation toolsDraft modification toolsDraft modification toolsDraft utility toolsDraft utility toolsDraft snapDraft snap&Drafting&Drafting&Annotation&Chú thích&Modification&Modification&Utilities&UtilitiesArc toolsArc toolsBézier toolsBézier toolsArray toolsArray toolsDraftDraftMớn nước của tàuImport-ExportNhập-XuấtDownload of dxf libraries failed.
Please install the dxf Library addon manually
from menu Tools -> Addon ManagerDownload of dxf libraries failed.
Please install the dxf Library addon manually
from menu Tools -> Addon ManagerYou must choose a base object before using this commandYou must choose a base object before using this commandDelete original objectsDelete original objectsCreate chamferCreate chamferSave styleSave styleName of this new style:Name of this new style:WarningWarningName exists. Overwrite?Name exists. Overwrite?Error: json module not found. Unable to save styleError: json module not found. Unable to save styleCloneNhân bảnSlopeSlopeOffset direction is not defined. Please move the mouse on either side of the object first to indicate a directionOffset direction is not defined. Please move the mouse on either side of the object first to indicate a directionTrueĐúngFalseSaiScaleKích cỡX factorX factorY factorY factorZ factorZ factorUniform scalingUniform scalingWorking plane orientationWorking plane orientationCopySao chépModify subelementsModify subelementsPick from/to pointsPick from/to pointsCreate a cloneTạo một bản saoPoint object doesn't have a discrete point, it cannot be used for an array.Point object doesn't have a discrete point, it cannot be used for an array._BSpline.createGeometry: Closed with same first/last Point. Geometry not updated._BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.Writing camera positionWriting camera positionWriting objects shown/hidden stateWriting objects shown/hidden stateMillimetersMillimetersCentimetersCentimetersMetersMetersInchesInchesFeetFeetArchitecturalArchitecturalThe preferred unit you are currently working with.The preferred unit you are currently working with.importOCAOCA error: couldn't determine character encodingOCA error: couldn't determine character encodingOCA: found no data to exportOCA: found no data to exportsuccessfully exportedsuccessfully exportedImportAirfoilDATDid not find enough coordinatesDid not find enough coordinatesImportSVGUnknown SVG export style, switching to TranslatedUnknown SVG export style, switching to TranslatedThe export list contains no object with a valid bounding boxThe export list contains no object with a valid bounding boxDraft_SelectPlaneSelect PlaneSelect PlaneSelect the face of solid body to create a working plane on which to sketch Draft objects.
You may also select a three vertices or a Working Plane Proxy.Select the face of solid body to create a working plane on which to sketch Draft objects.
You may also select a three vertices or a Working Plane Proxy.Draft_PathArrayPath arrayPath arrayCreates copies of the selected object along a selected path.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Creates copies of the selected object along a selected path.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Draft_PathLinkArrayPath Link arrayPath Link arrayLike the PathArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Like the PathArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Draft_LabelLabelNhãnCreates a label, optionally attached to a selected object or subelement.
First select a vertex, an edge, or a face of an object, then call this command,
and then set the position of the leader line and the textual label.
The label will be able to display information about this object, and about the selected subelement,
if any.
If many objects or many subelements are selected, only the first one in each case
will be used to provide information to the label.Creates a label, optionally attached to a selected object or subelement.
First select a vertex, an edge, or a face of an object, then call this command,
and then set the position of the leader line and the textual label.
The label will be able to display information about this object, and about the selected subelement,
if any.
If many objects or many subelements are selected, only the first one in each case
will be used to provide information to the label.Draft_LineLineĐường thẳngCreates a 2-point line. CTRL to snap, SHIFT to constrain.Creates a 2-point line. CTRL to snap, SHIFT to constrain.Draft_WirePolylinePolylineCreates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.Draft_HatchHatchHatchCreates hatches on the faces of a selected objectCreates hatches on the faces of a selected objectDraft_JoinJoinNốiJoins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.Draft_TextTextVăn bảnCreates a multi-line annotation. CTRL to snap.Creates a multi-line annotation. CTRL to snap.Draft_Draft2SketchDraft to SketchDraft to SketchConvert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.Convert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.Draft_Snap_LockSnap LockSnap LockEnables or disables snapping globally.Enables or disables snapping globally.Draft_Snap_MidpointSnap MidpointSnap MidpointSnaps to the midpoint of edges.Snaps to the midpoint of edges.Draft_Snap_PerpendicularSnap PerpendicularSnap PerpendicularSnaps to the perpendicular points on faces and edges.Snaps to the perpendicular points on faces and edges.Draft_Snap_GridSnap GridSnap GridSnaps to the intersections of grid lines.Snaps to the intersections of grid lines.Draft_Snap_IntersectionSnap IntersectionSnap IntersectionSnaps to the intersection of two edges.Snaps to the intersection of two edges.Draft_Snap_ParallelSnap ParallelSnap ParallelSnaps to an imaginary line parallel to straight edges.Snaps to an imaginary line parallel to straight edges.Draft_Snap_EndpointSnap EndpointSnap EndpointSnaps to the endpoints of edges.Snaps to the endpoints of edges.Draft_Snap_AngleSnap AngleSnap AngleSnaps to the special cardinal points on circular edges, at multiples of 30° and 45°.Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.Draft_Snap_CenterSnap CenterSnap CenterSnaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts.Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts.Draft_Snap_ExtensionSnap ExtensionSnap ExtensionSnaps to an imaginary line that extends beyond the endpoints of straight edges.Snaps to an imaginary line that extends beyond the endpoints of straight edges.Draft_Snap_NearSnap NearSnap NearSnaps to the nearest point on faces and edges.Snaps to the nearest point on faces and edges.Draft_Snap_OrthoSnap OrthoSnap OrthoSnaps to imaginary lines that cross the previous point at multiples of 45°.Snaps to imaginary lines that cross the previous point at multiples of 45°.Draft_Snap_SpecialSnap SpecialSnap SpecialSnaps to special points defined by the object.Snaps to special points defined by the object.Draft_Snap_DimensionsSnap DimensionsSnap DimensionsShows temporary X and Y dimensions.Shows temporary X and Y dimensions.Draft_Snap_WorkingPlaneSnap Working PlaneSnap Working PlaneProjects snap points onto the current working plane.Projects snap points onto the current working plane.Draft_ShowSnapBarShow snap toolbarShow snap toolbarShows the snap toolbar if it is hidden.Shows the snap toolbar if it is hidden.Draft_MoveMoveDi chuyểnMoves the selected objects from one base point to another point.
If the "copy" option is active, it will create displaced copies.
CTRL to snap, SHIFT to constrain.Moves the selected objects from one base point to another point.
If the "copy" option is active, it will create displaced copies.
CTRL to snap, SHIFT to constrain.Draft_ArcArcVòng cungCreates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.Creates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.Draft_Arc_3PointsArc by 3 pointsArc by 3 pointsCreates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.Draft_ArcToolsArc toolsArc toolsCreate various types of circular arcs.Create various types of circular arcs.Draft_ToggleGridToggle gridToggle gridToggles the Draft grid on and off.Toggles the Draft grid on and off.Draft_SubelementHighlightSubelement highlightSubelement highlightHighlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.Draft_EditEditChỉnh sửaEdits the active object.
Press E or ALT+LeftClick to display context menu
on supported nodes and on supported objects.Edits the active object.
Press E or ALT+LeftClick to display context menu
on supported nodes and on supported objects.Draft_AddPointAdd pointAdd pointAdds a point to an existing Wire or B-spline.Adds a point to an existing Wire or B-spline.Draft_DelPointRemove pointRemove pointRemoves a point from an existing Wire or B-spline.Removes a point from an existing Wire or B-spline.Draft_CircularArrayCircular arrayCircular arrayCreates copies of the selected object, and places the copies in a radial pattern
creating various circular layers.
The array can be turned into an orthogonal or a polar array by changing its type.Creates copies of the selected object, and places the copies in a radial pattern
creating various circular layers.
The array can be turned into an orthogonal or a polar array by changing its type.Draft_AnnotationStyleEditorAnnotation styles...Annotation styles...Manage or create annotation stylesManage or create annotation stylesDraft_DrawingDrawingBản vẽCreates a 2D projection on a Drawing Workbench page from the selected objects.
This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17.
Use TechDraw Workbench instead for generating technical drawings.Creates a 2D projection on a Drawing Workbench page from the selected objects.
This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17.
Use TechDraw Workbench instead for generating technical drawings.Draft_PointPointĐiểmCreates a point object. Click anywhere on the 3D view.Creates a point object. Click anywhere on the 3D view.Draft_RotateRotateXoayRotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
If the "copy" option is active, it will create rotated copies.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
If the "copy" option is active, it will create rotated copies.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Draft_AddToGroupMove to group...Move to group...Moves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.Moves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.Draft_SelectGroupSelect groupSelect groupSelects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected.Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected.Draft_AutoGroupAutogroupAutogroupSelect a group to add all Draft and Arch objects to.Select a group to add all Draft and Arch objects to.Draft_AddConstructionAdd to Construction groupAdd to Construction groupAdds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.Adds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.Draft_AddNamedGroupAdd a new named groupAdd a new named groupAdd a new group with a given name.Add a new group with a given name.Draft_WorkingPlaneProxyCreate working plane proxyCreate working plane proxyCreates a proxy object from the current working plane.
Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
Then you can use it to save a different camera position and objects' states any time you need.Creates a proxy object from the current working plane.
Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
Then you can use it to save a different camera position and objects' states any time you need.Draft_WireToBSplineWire to B-splineWire to B-splineConverts a selected polyline to a B-spline, or a B-spline to a polyline.Converts a selected polyline to a B-spline, or a B-spline to a polyline.Draft_FlipDimensionFlip dimensionFlip dimensionFlip the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Flip the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Draft_FilletFilletLàm trònCreates a fillet between two selected wires or edges.Creates a fillet between two selected wires or edges.Draft_SetStyleSet styleSet styleSets default stylesSets default stylesDraft_PolygonPolygonĐa giácCreates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrainCreates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrainDraft_SplitSplitSplitSplits the selected line or polyline into two independent lines
or polylines by clicking anywhere along the original object.
It works best when choosing a point on a straight segment and not a corner vertex.Splits the selected line or polyline into two independent lines
or polylines by clicking anywhere along the original object.
It works best when choosing a point on a straight segment and not a corner vertex.Draft_TrimexTrimexTrimexTrims or extends the selected object, or extrudes single faces.
CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.Trims or extends the selected object, or extrudes single faces.
CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.Draft_BSplineB-splineB-splineCreates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.Draft_ApplyStyleApply current styleApply current styleApplies the current style defined in the toolbar (line width and colors) to the selected objects and groups.Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups.Draft_BezCurveBézier curveBézier curveCreates an N-degree Bézier curve. The more points you pick, the higher the degree.
CTRL to snap, SHIFT to constrain.Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
CTRL to snap, SHIFT to constrain.Draft_CubicBezCurveCubic Bézier curveCubic Bézier curveCreates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
After the curve is created you can go back to edit each control point and set the properties of each knot.
CTRL to snap, SHIFT to constrain.Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
After the curve is created you can go back to edit each control point and set the properties of each knot.
CTRL to snap, SHIFT to constrain.Draft_BezierToolsBézier toolsBézier toolsCreate various types of Bézier curves.Create various types of Bézier curves.Draft_CircleCircleVòng trònCreates a circle (full circular arc).
CTRL to snap, ALT to select tangent objects.Creates a circle (full circular arc).
CTRL to snap, ALT to select tangent objects.Draft_EllipseEllipseHình elípCreates an ellipse. CTRL to snap.Creates an ellipse. CTRL to snap.Draft_FacebinderFacebinderKết nối mặtCreates a facebinder object from selected faces.Creates a facebinder object from selected faces.Draft_OrthoArrayArrayArrayCreates copies of the selected object, and places the copies in an orthogonal pattern,
meaning the copies follow the specified direction in the X, Y, Z axes.
The array can be turned into a polar or a circular array by changing its type.Creates copies of the selected object, and places the copies in an orthogonal pattern,
meaning the copies follow the specified direction in the X, Y, Z axes.
The array can be turned into a polar or a circular array by changing its type.Draft_ScaleScaleKích cỡScales the selected objects from a base point.
CTRL to snap, SHIFT to constrain, ALT to copy.Scales the selected objects from a base point.
CTRL to snap, SHIFT to constrain, ALT to copy.Draft_LayerLayerLayerAdds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.Adds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.Draft_PointArrayPoint arrayPoint arrayCreates copies of the selected base object at the points of a point object.
First select the base object, and then select the point object.Creates copies of the selected base object at the points of a point object.
First select the base object, and then select the point object.Draft_PointLinkArrayPointLinkArrayPointLinkArrayLike the PointArray tool, but creates a 'Point link array' instead.
A 'Point link array' is more efficient when handling many copies.Like the PointArray tool, but creates a 'Point link array' instead.
A 'Point link array' is more efficient when handling many copies.Draft_ArrayToolsArray toolsArray toolsCreate various types of arrays, including rectangular, polar, circular, path, and pointCreate various types of arrays, including rectangular, polar, circular, path, and pointDraft_ToggleConstructionModeToggle construction modeToggle construction modeToggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.Toggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.Draft_ToggleContinueModeToggle continue modeToggle continue modeToggles the Continue mode.
When this is active, any drawing tool that is terminated will automatically start again.
This can be used to draw several objects one after the other in succession.Toggles the Continue mode.
When this is active, any drawing tool that is terminated will automatically start again.
This can be used to draw several objects one after the other in succession.Draft_ToggleDisplayModeToggle normal/wireframe displayToggle normal/wireframe displaySwitches the display mode of selected objects from flatlines to wireframe and back.
This is helpful to quickly visualize objects that are hidden by other objects.
This is intended to be used with closed shapes and solids, and doesn't affect open wires.Switches the display mode of selected objects from flatlines to wireframe and back.
This is helpful to quickly visualize objects that are hidden by other objects.
This is intended to be used with closed shapes and solids, and doesn't affect open wires.Draft_DimensionDimensionKích thướcCreates a dimension.
- Pick three points to create a simple linear dimension.
- Select a straight line to create a linear dimension linked to that line.
- Select an arc or circle to create a radius or diameter dimension linked to that arc.
- Select two straight lines to create an angular dimension between them.
CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
You may select a single line or single circular arc before launching this command
to create the corresponding linked dimension.
You may also select an 'App::MeasureDistance' object before launching this command
to turn it into a 'Draft Dimension' object.Creates a dimension.
- Pick three points to create a simple linear dimension.
- Select a straight line to create a linear dimension linked to that line.
- Select an arc or circle to create a radius or diameter dimension linked to that arc.
- Select two straight lines to create an angular dimension between them.
CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
You may select a single line or single circular arc before launching this command
to create the corresponding linked dimension.
You may also select an 'App::MeasureDistance' object before launching this command
to turn it into a 'Draft Dimension' object.Draft_StretchStretchStretchStretches the selected objects.
Select an object, then draw a rectangle to pick the vertices that will be stretched,
then draw a line to specify the distance and direction of stretching.Stretches the selected objects.
Select an object, then draw a rectangle to pick the vertices that will be stretched,
then draw a line to specify the distance and direction of stretching.Draft_RectangleRectangleHình chữ nhậtCreates a 2-point rectangle. CTRL to snap.Creates a 2-point rectangle. CTRL to snap.Draft_MirrorMirrorMirrorMirrors the selected objects along a line defined by two points.Mirrors the selected objects along a line defined by two points.Draft_PathTwistedArrayPath twisted arrayPath twisted arrayCreates copies of the selected object along a selected path, and twists the copies.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Creates copies of the selected object along a selected path, and twists the copies.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Draft_PathTwistedLinkArrayPath twisted Link arrayPath twisted Link arrayLike the PathTwistedArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Like the PathTwistedArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Draft_CloneCloneNhân bảnCreates a clone of the selected objects.
The resulting clone can be scaled in each of its three directions.Creates a clone of the selected objects.
The resulting clone can be scaled in each of its three directions.Draft_PolarArrayPolar arrayPolar arrayCreates copies of the selected object, and places the copies in a polar pattern
defined by a center of rotation and its angle.
The array can be turned into an orthogonal or a circular array by changing its type.Creates copies of the selected object, and places the copies in a polar pattern
defined by a center of rotation and its angle.
The array can be turned into an orthogonal or a circular array by changing its type.Draft_SlopeSet slopeSet slopeSets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.Draft_UpgradeUpgradeUpgradeUpgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Draft_OffsetOffsetOffsetOffsets of the selected object.
It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Offsets of the selected object.
It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Draft_Shape2DViewShape 2D viewShape 2D viewCreates a 2D projection of the selected objects on the XY plane.
The initial projection direction is the negative of the current active view direction.
You can select individual faces to project, or the entire solid, and also include hidden lines.
These projections can be used to create technical drawings with the TechDraw Workbench.Creates a 2D projection of the selected objects on the XY plane.
The initial projection direction is the negative of the current active view direction.
You can select individual faces to project, or the entire solid, and also include hidden lines.
These projections can be used to create technical drawings with the TechDraw Workbench.Draft_ShapeStringShape from textShape from textCreates a shape from a text string by choosing a specific font and a placement.
The closed shapes can be used for extrusions and boolean operations.Creates a shape from a text string by choosing a specific font and a placement.
The closed shapes can be used for extrusions and boolean operations.Draft_HealHealHealHeal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.Heal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.Draft_DowngradeDowngradeDowngradeDowngrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.Draft_ArrayArrayArrayCreates an array from a selected object.
By default, it is a 2x2 orthogonal array.
Once the array is created its type can be changed
to polar or circular, and its properties can be modified.Creates an array from a selected object.
By default, it is a 2x2 orthogonal array.
Once the array is created its type can be changed
to polar or circular, and its properties can be modified.Draft_LinkArrayLinkArrayLinkArrayLike the Array tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Like the Array tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.App::PropertyThe placement of the base point of the first lineThe placement of the base point of the first lineThe text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.Text stringText stringFont file nameFont file nameHeight of textHeight of textInter-character spacingInter-character spacingFill letters with facesFill letters with facesThe base object used by this objectThe base object used by this objectThe PAT file used by this objectThe PAT file used by this objectThe pattern name used by this objectThe pattern name used by this objectThe pattern scale used by this objectThe pattern scale used by this objectThe pattern rotation used by this objectThe pattern rotation used by this objectIf set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)The objects included in this cloneThe objects included in this cloneThe scale factor of this cloneThe scale factor of this cloneIf Clones includes several objects,
set True for fusion or False for compoundIf Clones includes several objects,
set True for fusion or False for compoundStart angle of the arcStart angle of the arcEnd angle of the arc (for a full circle,
give it same value as First Angle)End angle of the arc (for a full circle,
give it same value as First Angle)Radius of the circleRadius of the circleCreate a faceCreate a faceThe area of this objectThe area of this objectThe objects that are part of this layerThe objects that are part of this layerNumber of facesNumber of facesRadius of the control circleRadius of the control circleHow the polygon must be drawn from the control circleHow the polygon must be drawn from the control circleRadius to use to fillet the cornersRadius to use to fillet the cornersSize of the chamfer to give to the cornersSize of the chamfer to give to the cornersThe base object that will be duplicated.The base object that will be duplicated.The object along which the copies will be distributed. It must contain 'Edges'.The object along which the copies will be distributed. It must contain 'Edges'.Number of copies to create.Number of copies to create.Rotation factor of the twisted array.Rotation factor of the twisted array.Show the individual array elements (only for Link arrays)Show the individual array elements (only for Link arrays)The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The placement of the 'Text' element in 3D spaceThe placement of the 'Text' element in 3D spaceThe text to display when 'Label Type' is set to 'Custom'The text to display when 'Label Type' is set to 'Custom'The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.The base object that will be duplicatedThe base object that will be duplicatedList of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.Number of copies to createNumber of copies to createAdditional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Alignment vector for 'Tangent' modeAlignment vector for 'Tangent' modeForce use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment modeForce use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment modeDirection of the local Z axis when 'Force Vertical' is trueDirection of the local Z axis when 'Force Vertical' is trueMethod to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Method to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.Specifies if the copies should be fused together if they touch each other (slower)Specifies if the copies should be fused together if they touch each other (slower)Number of copies in X directionNumber of copies in X directionNumber of copies in Y directionNumber of copies in Y directionNumber of copies in Z directionNumber of copies in Z directionDistance and orientation of intervals in X directionDistance and orientation of intervals in X directionDistance and orientation of intervals in Y directionDistance and orientation of intervals in Y directionDistance and orientation of intervals in Z directionDistance and orientation of intervals in Z directionThe axis direction around which the elements in a polar or a circular array will be createdThe axis direction around which the elements in a polar or a circular array will be createdCenter point for polar and circular arrays.
The 'Axis' passes through this point.Center point for polar and circular arrays.
The 'Axis' passes through this point.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.Number of copies in the polar directionNumber of copies in the polar directionDistance and orientation of intervals in 'Axis' directionDistance and orientation of intervals in 'Axis' directionAngle to cover with copiesAngle to cover with copiesDistance between circular layersDistance between circular layersDistance between copies in the same circular layerDistance between copies in the same circular layerNumber of circular layers. The 'Base' object counts as one layer.Number of circular layers. The 'Base' object counts as one layer.A parameter that determines how many symmetry planes the circular array will have.A parameter that determines how many symmetry planes the circular array will have.Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Base object that will be duplicatedBase object that will be duplicatedObject containing points used to distribute the copies.Object containing points used to distribute the copies.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Additional placement, shift and rotation, that will be applied to each copyAdditional placement, shift and rotation, that will be applied to each copyThe base object this 2D view must representThe base object this 2D view must representThe projection vector of this objectThe projection vector of this objectThe way the viewed object must be projectedThe way the viewed object must be projectedThe indices of the faces to be projected in Individual Faces modeThe indices of the faces to be projected in Individual Faces modeShow hidden linesHiển thị những đường bị ẩnFuse wall and structure objects of same type and materialFuse wall and structure objects of same type and materialTessellate Ellipses and B-splines into line segmentsTessellate Ellipses and B-splines into line segmentsFor Cutlines and Cutfaces modes,
this leaves the faces at the cut locationFor Cutlines and Cutfaces modes,
this leaves the faces at the cut locationLength of line segments if tessellating Ellipses or B-splines
into line segmentsLength of line segments if tessellating Ellipses or B-splines
into line segmentsIf this is True, this object will include only visible objectsIf this is True, this object will include only visible objectsA list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.If this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyThis object will be recomputed only if this is True.This object will be recomputed only if this is True.The points of the Bezier curveThe points of the Bezier curveThe degree of the Bezier functionThe degree of the Bezier functionContinuityLiên tụcIf the Bezier curve should be closed or notIf the Bezier curve should be closed or notCreate a face if this curve is closedCreate a face if this curve is closedThe length of this objectThe length of this objectThe placement of this objectThe placement of this objectX LocationX LocationY LocationY LocationZ LocationZ LocationStart angle of the elliptical arcStart angle of the elliptical arcEnd angle of the elliptical arc
(for a full circle, give it same value as First Angle)End angle of the elliptical arc
(for a full circle, give it same value as First Angle)Minor radius of the ellipseMinor radius of the ellipseMajor radius of the ellipseMajor radius of the ellipseArea of this objectArea of this objectThe start point of this line.The start point of this line.The end point of this line.The end point of this line.The length of this line.The length of this line.Radius to use to fillet the corner.Radius to use to fillet the corner.The normal direction of the text of the dimensionThe normal direction of the text of the dimensionThe object measured by this dimension objectThe object measured by this dimension objectThe object, and specific subelements of it,
that this dimension object is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.The object, and specific subelements of it,
that this dimension object is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.When measuring circular arcs, it determines whether to display
the radius or the diameter valueWhen measuring circular arcs, it determines whether to display
the radius or the diameter valueStarting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Starting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.Length of the rectangleLength of the rectangleHeight of the rectangleHeight of the rectangleHorizontal subdivisions of this rectangleHorizontal subdivisions of this rectangleVertical subdivisions of this rectangleVertical subdivisions of this rectangleLinked facesLinked facesSpecifies if splitter lines must be removedSpecifies if splitter lines must be removedAn optional extrusion value to be applied to all facesAn optional extrusion value to be applied to all facesAn optional offset value to be applied to all facesAn optional offset value to be applied to all facesThis specifies if the shapes sewThis specifies if the shapes sewThe area of the faces of this FacebinderThe area of the faces of this FacebinderThe linked objectThe linked objectProjection directionProjection directionThe width of the lines inside this objectThe width of the lines inside this objectThe size of the texts inside this objectThe size of the texts inside this objectThe spacing between lines of textThe spacing between lines of textThe color of the projected objectsThe color of the projected objectsShape Fill StyleShape Fill StyleLine StyleLine StyleIf checked, source objects are displayed regardless of being visible in the 3D modelIf checked, source objects are displayed regardless of being visible in the 3D modelThe components of this blockThe components of this blockThe vertices of the wireThe vertices of the wireIf the wire is closed or notIf the wire is closed or notThe base object is the wire, it's formed from 2 objectsThe base object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe start point of this lineThe start point of this lineThe end point of this lineThe end point of this lineThe length of this lineThe length of this lineCreate a face if this object is closedCreate a face if this object is closedThe number of subdivisions of each edgeThe number of subdivisions of each edgeThe points of the B-splineThe points of the B-splineIf the B-spline is closed or notIf the B-spline is closed or notCreate a face if this spline is closedCreate a face if this spline is closedParameterization factorParameterization factorForce sync pattern placements even when array elements are expandedForce sync pattern placements even when array elements are expandedShow the individual array elementsShow the individual array elementsText colorText colorLine spacing (relative to font size)Line spacing (relative to font size)Vertical alignmentVertical alignmentMaximum number of characters on each line of the text boxMaximum number of characters on each line of the text boxHorizontal alignmentHorizontal alignmentThe type of frame around the text of this objectThe type of frame around the text of this objectDisplay a leader line or notDisplay a leader line or notLine widthChiều rộng đường vẽLine colorMàu đường vẽDefines an SVG pattern.Defines an SVG pattern.Defines the size of the SVG pattern.Defines the size of the SVG pattern.If it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the shape color of the layerIf it is true, the objects contained within this layer will adopt the shape color of the layerIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageThe line color of the objects contained within this layerThe line color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape color of the objects contained within this layerThe line width of the objects contained within this layerThe line width of the objects contained within this layerThe draw style of the objects contained within this layerThe draw style of the objects contained within this layerThe transparency of the objects contained within this layerThe transparency of the objects contained within this layerThe line color of the objects contained within this layer, when used on a TechDraw pageThe line color of the objects contained within this layer, when used on a TechDraw pageFont nameTên phông chữFont sizeCỡ phông chữSpacing between text and dimension lineSpacing between text and dimension lineRotate the dimension text 180 degreesRotate the dimension text 180 degreesText Position.
Leave '(0,0,0)' for automatic positionText Position.
Leave '(0,0,0)' for automatic positionText override.
Write '$dim' so that it is replaced by the dimension length.Text override.
Write '$dim' so that it is replaced by the dimension length.The number of decimals to showThe number of decimals to showShow the unit suffixShow the unit suffixA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationArrow sizeKích cỡ mũi tênArrow typeLoại mũi tênRotate the dimension arrows 180 degreesRotate the dimension arrows 180 degreesThe distance the dimension line is extended
past the extension linesThe distance the dimension line is extended
past the extension linesLength of the extension linesLength of the extension linesLength of the extension line
beyond the dimension lineLength of the extension line
beyond the dimension lineShows the dimension line and arrowsShows the dimension line and arrowsCommandTransformBiến đổi