DialogAnnotation Styles Editorசிறுகுறிப்பு பாங்குகள் எடிட்டர்Renames the selected styleதேர்ந்தெடுக்கப்பட்ட பாணியை மறுபெயரிடுகிறதுRenameமறுபெயரிடுDeletes the selected styleதேர்ந்தெடுக்கப்பட்ட பாணியை நீக்குகிறதுNewபுதியDeleteநீக்குLayers Managerஅடுக்கு மேலாளர்Select Allஅனைத்தையும் தேர்ந்தெடுToggle Visibilityதெரிவுநிலையை நிலைமாற்றுIsolateதனிமைப்படுத்துCancelரத்துசெய்OKசரிImport styles from json fileசாதொபொகு கோப்பிலிருந்து ச்டைல்களை இறக்குமதி செய்யவும்Export styles to json fileசாதொபொகு கோப்பில் ச்டைல்களை ஏற்றுமதி செய்யவும்The font to use for texts and dimensionsஉரைகள் மற்றும் பரிமாணங்களுக்கு பயன்படுத்த வேண்டிய எழுத்துருFont nameஎழுத்துரு பெயர்The font size in system unitsகணினி அலகுகளில் எழுத்துரு அளவுThe width of the linesகோடுகளின் அகலம் pxpxThe color of lines and arrowsகோடுகள் மற்றும் அம்புகளின் நிறம்Line and arrow colorகோடு மற்றும் அம்பு நிறம்The distance the dimension line is additionally extendedபரிமாணக் கோட்டின் தூரம் கூடுதலாக நீட்டிக்கப்பட்டுள்ளதுDimension line overshootபரிமாணக் கோடு ஓவர்சூட்Extension line lengthநீட்டிப்பு வரி நீளம்The distance the extension lines are additionally extended beyond the dimension lineநீட்டிப்புக் கோடுகள் பரிமாணக் கோட்டிற்கு அப்பால் நீட்டிக்கப்படும் தூரம்Font sizeஎழுத்துரு அளவுThe line spacing for multi-line texts and labels (relative to the font size)பல வரி உரைகள் மற்றும் லேபிள்களுக்கான வரி இடைவெளி (எழுத்துரு அளவுடன் தொடர்புடையது)The color of texts, dimension texts and label textsஉரைகளின் நிறம், பரிமாண உரைகள் மற்றும் சிட்டை உரைகள்Text colorஉரை நிறம்Unitsஅலகுகள்A multiplier factor that affects the size of texts and markersஉரைகள் மற்றும் குறிப்பான்களின் அளவை பாதிக்கும் ஒரு பெருக்கி காரணிStyle Nameஉடை பெயர்The name of the style. Existing style names can be edited.பாணியின் பெயர். ஏற்கனவே உள்ள பாணி பெயர்களை திருத்தலாம்.Add new…புதியதைச் சேர்…Scale multiplierஅளவு பெருக்கிThe type of the starting arrows or markers to use for dimensions and labelsபரிமாணங்கள் மற்றும் லேபிள்களுக்குப் பயன்படுத்துவதற்கான தொடக்க அம்புகள் அல்லது குறிப்பான்களின் வகைStart arrow typeதொடக்க அம்பு வகைNoneஎதுவுமில்லைThe size of the starting arrows or markers in system unitsகணினி அலகுகளில் தொடக்க அம்புகள் அல்லது குறிப்பான்களின் அளவுStart arrow sizeதொடக்க அம்பு அளவுThe type of the ending arrows or markers to use for dimensions and labelsபரிமாணங்கள் மற்றும் லேபிள்களுக்குப் பயன்படுத்துவதற்கான முடிவு அம்புகள் அல்லது குறிப்பான்களின் வகைEnd arrow typeமுடிவு அம்புக்குறி வகைThe size of the ending arrows or markers in system unitsகணினி அலகுகளில் முடிவடையும் அம்புகள் அல்லது குறிப்பான்களின் அளவுEnd arrow sizeஇறுதி அம்புக்குறி அளவுIf it is checked it will show the unit next to the dimension valueஅதைச் சரிபார்த்தால், அது பரிமாண மதிப்பிற்கு அடுத்துள்ள யூனிட்டைக் காண்பிக்கும்Show unitஅலகு காட்டுSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitஇந்த அலகில் பரிமாண மதிப்பைக் காட்ட கட்டாயப்படுத்த mm, m, in, ft போன்ற செல்லுபடியாகும் நீள அலகைக் குறிப்பிடவும்Unit overrideஅலகு மேலெழுதல்The number of decimals to show for dimension valuesபரிமாண மதிப்புகளுக்கு காட்ட வேண்டிய தசமங்களின் எண்ணிக்கைDimension Detailsபரிமாண விவரங்கள்The distance between the dimension text and the dimension lineபரிமாண உரைக்கும் பரிமாணக் கோட்டிற்கும் இடையே உள்ள தூரம்Text spacingஉரை இடைவெளிAnnotationsசிறுகுறிப்புகள்Textsஉரைகள்Line spacing factorவரி இடைவெளி காரணிLines and Arrowsகோடுகள் மற்றும் அம்புகள்Displays the dimension lineபரிமாணக் கோட்டைக் காட்டுகிறதுShow dimension lineபரிமாணக் கோட்டைக் காட்டுLine widthவரி அகலம்Dotபுள்ளிCircleவட்டம்Arrowஅம்புTickஉண்ணிTick-2டிக்-2Shows the unit next to the dimension valueபரிமாண மதிப்புக்கு அடுத்த அலகு காட்டுகிறதுNumber of decimalsதசமங்களின் எண்ணிக்கைExtension line overshootநீட்டிப்பு வரி ஓவர்சூட்The length of the extension linesநீட்டிப்பு வரிகளின் நீளம்DraftCircularArrayTaskPanelCircular Arrayவட்ட வரிசைDistance from one layer of objects to the next layer of objectsபொருள்களின் ஒரு அடுக்கில் இருந்து அடுத்த அடுக்கு பொருள்களுக்கான தூரம்Radial distanceரேடியல் தூரம்Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.அணிவரிசையின் ஒரு வளையத்தில் உள்ள ஒரு உறுப்புக்கும் அதே வளையத்தில் உள்ள அடுத்த உறுப்புக்கும் உள்ள தூரம்.
இது பூச்சியமாக இருக்க முடியாது.Tangential distanceதொடு தூரம்The number of symmetry lines in the circular arrayவட்ட வரிசையில் உள்ள சமச்சீர் கோடுகளின் எண்ணிக்கைCenter of Rotationசுழற்சி நடுவண்Resets the coordinates of the center of rotationசுழற்சி மையத்தின் ஆயங்களை மீட்டமைக்கிறதுReset Pointரீசெட் பாயிண்ட்Symmetryசமச்சீர்Number of concentric circles to create, including a copy of the original object.
It must be at least 2.அசல் பொருளின் நகல் உட்பட உருவாக்க வேண்டிய செறிவு வட்டங்களின் எண்ணிக்கை.
இது குறைந்தது 2 ஆக இருக்க வேண்டும்.Number of concentric circlesசெறிவு வட்டங்களின் எண்ணிக்கைThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.சுழற்சியின் அச்சு கடந்து செல்லும் புள்ளியின் ஆயத்தொலைவுகள்.
சொத்து எடிட்டரில் அச்சின் திசையை மாற்றவும்.Xஃச்Yஒய்Zசட்If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.சரிபார்க்கப்பட்டால், வரிசையில் உள்ள பொருள்கள் ஒன்றையொன்று தொட்டால் அவை இணைக்கப்படும்.
"இணைப்பு வரிசை" முடக்கப்பட்டிருந்தால் மட்டுமே இது செயல்படும்.FuseஉருகிIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.சரிபார்த்தால், இதன் விளைவாக வரும் பொருள் வழக்கமான அணிவரிசைக்கு பதிலாக "இணைப்பு வரிசை" ஆக இருக்கும்.
பல நகல்களை உருவாக்கும் போது இணைப்பு வரிசை மிகவும் திறமையானது, ஆனால் அதை ஒன்றாக இணைக்க முடியாது.Link arrayஇணைப்பு வரிசைDraftOrthoArrayTaskPanelNumber of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.அசல் பொருளின் நகல் உட்பட, குறிப்பிட்ட திசையில் வரிசையில் உள்ள உறுப்புகளின் எண்ணிக்கை.
ஒவ்வொரு திசையிலும் எண் குறைந்தது 1 ஆக இருக்க வேண்டும்.Xஃச்Yஒய்Zசட்Reset Xஃச் மீட்டமைReset YYஐ மீட்டமைDistance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.சட் திசையில் உள்ள உறுப்புகளுக்கு இடையே உள்ள தூரம்.
பொதுவாக, சட் மதிப்பு மட்டுமே அவசியம்; மற்ற இரண்டு மதிப்புகள் அந்தந்த திசைகளில் கூடுதல் மாற்றத்தை கொடுக்கலாம்.
எதிர்மறை மதிப்புகள் எதிர்மறை திசையில் விளைவாக்கம் செய்யப்படும் நகல்களுக்கு வழிவகுக்கும்.Orthogonal Arrayஆர்த்தோகனல் வரிசைToggles between orthogonal and linear modeஆர்த்தோகனல் மற்றும் லீனியர் பயன்முறைக்கு இடையில் மாறுகிறதுSwitch to Linear Modeநேரியல் பயன்முறைக்கு மாறவும்X axisஃச் அச்சுY axisஒய் அச்சுZ axisசட் அச்சுNumber of Elementsஉறுப்புகளின் எண்ணிக்கைCurrently selected axisதற்போது தேர்ந்தெடுக்கப்பட்ட அச்சுDistance between the elements in the X-direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.எக்ச்-திசையில் உள்ள உறுப்புகளுக்கு இடையே உள்ள தூரம்.
பொதுவாக, ஃச் மதிப்பு மட்டுமே அவசியம்; மற்ற இரண்டு மதிப்புகள் அந்தந்த திசைகளில் கூடுதல் மாற்றத்தை கொடுக்கலாம்.
எதிர்மறை மதிப்புகள் எதிர்மறை திசையில் விளைவாக்கம் செய்யப்படும் நகல்களுக்கு வழிவகுக்கும்.X Intervalsஃச் இடைவெளிகள்Resets the distancesதூரங்களை மீட்டமைக்கிறதுDistance between the elements in the Y-direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Y-திசையில் உள்ள உறுப்புகளுக்கு இடையே உள்ள தூரம்.
பொதுவாக, ஒய் மதிப்பு மட்டுமே அவசியம்; மற்ற இரண்டு மதிப்புகள் அந்தந்த திசைகளில் கூடுதல் மாற்றத்தை கொடுக்கலாம்.
எதிர்மறை மதிப்புகள் எதிர்மறை திசையில் விளைவாக்கம் செய்யப்படும் நகல்களுக்கு வழிவகுக்கும்.Y Intervalsஒய் இடைவெளிகள்Z Intervalsசட் இடைவெளிகள்Reset Zசட் ஐ மீட்டமைக்கவும்If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.சரிபார்க்கப்பட்டால், வரிசையில் உள்ள பொருள்கள் ஒன்றையொன்று தொட்டால் அவை இணைக்கப்படும்.
"இணைப்பு வரிசை" முடக்கப்பட்டிருந்தால் மட்டுமே இது செயல்படும்.FuseFuseIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.சரிபார்த்தால், இதன் விளைவாக வரும் பொருள் வழக்கமான அணிவரிசைக்கு பதிலாக "இணைப்பு வரிசை" ஆக இருக்கும்.
பல நகல்களை உருவாக்கும் போது இணைப்பு வரிசை மிகவும் திறமையானது, ஆனால் அதை ஒன்றாக இணைக்க முடியாது.Link arrayஇணைப்பு வரிசைDraftPolarArrayTaskPanelPolar Arrayதுருவ வரிசைSweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.துருவப் பரவலின் ச்வீப்பிங் கோணம்.
எதிர்மறை கோணம் எதிர் திசையில் ஒரு துருவ வடிவத்தை உருவாக்குகிறது.
அதிகபட்ச முழுமையான மதிப்பு 360 டிகிரி ஆகும்.Polar angleதுருவ கோணம்Number of elements in the array, including a copy of the original object.
It must be at least 2.அசல் பொருளின் நகல் உட்பட, வரிசையில் உள்ள உறுப்புகளின் எண்ணிக்கை.
இது குறைந்தது 2 ஆக இருக்க வேண்டும்.Number of elementsஉறுப்புகளின் எண்ணிக்கைThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.சுழற்சியின் அச்சு கடந்து செல்லும் புள்ளியின் ஆயத்தொலைவுகள்.
சொத்து எடிட்டரில் அச்சின் திசையை மாற்றவும்.Center of Rotationசுழற்சி நடுவண்Resets the coordinates of the center of rotationசுழற்சி மையத்தின் ஆயங்களை மீட்டமைக்கிறதுReset Pointரீசெட் பாயிண்ட்Xஃச்Yஒய்Zசட்If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.சரிபார்க்கப்பட்டால், வரிசையில் உள்ள பொருள்கள் ஒன்றையொன்று தொட்டால் அவை இணைக்கப்படும்.
"இணைப்பு வரிசை" முடக்கப்பட்டிருந்தால் மட்டுமே இது செயல்படும்.FuseFuseIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.சரிபார்த்தால், இதன் விளைவாக வரும் பொருள் வழக்கமான அணிவரிசைக்கு பதிலாக "இணைப்பு வரிசை" ஆக இருக்கும்.
பல நகல்களை உருவாக்கும் போது இணைப்பு வரிசை மிகவும் திறமையானது, ஆனால் அதை ஒன்றாக இணைக்க முடியாது.Link arrayஇணைப்பு வரிசைDraftShapeStringGuiShapeStringசேப்ச்ட்ரிங்Xஃச்Yஒய்Zசட்Coordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemஉலகளாவிய ஒருங்கிணைப்பு அமைப்புடன் தொடர்புடைய ஒருங்கிணைப்புகள்.
வேலை செய்யும் விமான ஒருங்கிணைப்பு அமைப்பைப் பயன்படுத்த தேர்வுநீக்கவும்GlobalஉலகளாவியFont files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)எழுத்துரு கோப்புகள் (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)Text to be made into ShapeStringஉரையை ShapeString ஆக மாற்ற வேண்டும்Enter coordinates or pick a point with the mouseஆயங்களை உள்ளிடவும் அல்லது சுட்டியைக் கொண்டு ஒரு புள்ளியைத் தேர்ந்தெடுக்கவும்Resets the picked pointதேர்ந்தெடுக்கப்பட்ட புள்ளியை மீட்டமைக்கிறதுReset Pointரீசெட் பாயிண்ட்Heightஉயரம்Height of the resultமுடிவின் உயரம்TextஉரைFont fileஎழுத்துரு கோப்புFormTop (XY)மேல் (XY)Front (XZ)முன் (XZ)Side (YZ)பக்க (YZ)Sets the working plane facing the current viewதற்போதைய காட்சியை எதிர்கொள்ளும் வேலை செய்யும் விமானத்தை அமைக்கிறதுWorking Plane Setupவேலை செய்யும் விமான அமைப்புChoose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view.கீழே ஒரு விருப்பத்தைத் தேர்ந்தெடுக்கவும். அல்லது 3 செங்குத்துகள், 1 அல்லது அதற்கு மேற்பட்ட வடிவங்கள் அல்லது வேலை செய்யும் விமான ப்ராக்சியைத் தேர்ந்தெடுத்து வேலை செய்யும் விமானத்தை வரையறுக்கவும், பின்னர் 3D காட்சியில் சொடுக்கு செய்வதன் மூலம் உறுதிப்படுத்தவும்.Sets the working plane to the XY-plane (ground plane)வேலை செய்யும் விமானத்தை XY- விமானத்திற்கு (தரை விமானம்) அமைக்கிறதுSets the working plane to the XZ-plane (front plane)வேலை செய்யும் விமானத்தை XZ- விமானத்திற்கு அமைக்கிறது (முன் விமானம்)Sets the working plane to the YZ-plane (side plane)வேலை செய்யும் விமானத்தை YZ- விமானத்திற்கு அமைக்கிறது (பக்க விமானம்)Align to Viewபார்வைக்கு சீரமைக்கவும்The working plane will align to the current
view each time a command is startedவேலை செய்யும் வானூர்தி மின்னோட்டத்திற்கு சீரமைக்கும்
ஒவ்வொரு முறை கட்டளை தொடங்கப்படும்போதும் பார்க்கவும்Automaticதானியங்கிOffsetஆஃப்செட்An optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveவேலை செய்யும் விமானத்திற்கு வழங்குவதற்கான விருப்பமான ஆஃப்செட்
அதன் அடிப்படை நிலைக்கு மேலே. இதை ஒன்றாகப் பயன்படுத்தவும்
மேலே உள்ள பொத்தான்களில்If this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveஇது தேர்ந்தெடுக்கப்பட்டால், வேலை செய்யும் வானூர்தி இருக்கும்
ஒன்றை அழுத்தும் போது தற்போதைய காட்சியை மையமாகக் கொண்டது
மேலே உள்ள பொத்தான்களில்Center plane on viewபார்வையில் மைய வானூர்திCenters the working plane on the current view when pressing one
of the buttons aboveஒன்றை அழுத்தும் போது வேலை செய்யும் விமானத்தை தற்போதைய காட்சியில் மையப்படுத்துகிறது
மேலே உள்ள பொத்தான்களில்Or select a single vertex to move the current working plane without changing its orientation. Then press the button below.அல்லது தற்போதைய வேலை செய்யும் விமானத்தை அதன் நோக்குநிலையை மாற்றாமல் நகர்த்த ஒற்றை உச்சியைத் தேர்ந்தெடுக்கவும். பின்னர் கீழே உள்ள பொத்தானை அழுத்தவும்.Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view.வேலை செய்யும் விமானத்தை மாற்றாமல் நகர்த்துகிறது
நோக்குநிலை. புள்ளி எதுவும் தேர்ந்தெடுக்கப்படவில்லை என்றால், வானூர்தி
பார்வையின் மையத்திற்கு நகர்த்தப்படும்.Move Working Planeவேலை செய்யும் விமானத்தை நகர்த்தவும்The color of the gridகட்டத்தின் நிறம்Grid colorகட்டம் நிறம்The distance between grid linesகட்டக் கோடுகளுக்கு இடையே உள்ள தூரம்The number of squares between major grid linesமுக்கிய கட்டக் கோடுகளுக்கு இடையே உள்ள சதுரங்களின் எண்ணிக்கைMajor lines everyமுக்கிய வரிகள் ஒவ்வொன்றும் squaresசதுரங்கள்Grid sizeகட்ட அளவுThe distance at which a point can be snapped toஒரு புள்ளியை ச்னாப் செய்யக்கூடிய தூரம்Center Viewமையக் காட்சிResets the working plane to its next positionவேலை செய்யும் விமானத்தை அதன் அடுத்த நிலைக்கு மீட்டமைக்கிறதுNextஅடுத்ததுGrid spacingகட்ட இடைவெளிThe number of squares in the X- and Y-direction of the gridகட்டத்தின் X- மற்றும் ஒய் திசையில் உள்ள சதுரங்களின் எண்ணிக்கைSnapping radiusச்னாப்பிங் ஆரம்Centers the view on the current working planeதற்போதைய வேலை செய்யும் விமானத்தில் பார்வையை மையப்படுத்துகிறதுResets the working plane to its previous positionவேலை செய்யும் விமானத்தை அதன் முந்தைய நிலைக்கு மீட்டமைக்கிறதுPreviousமுந்தையLoad presetஏற்ற முன்னமைவுShapeவடிவம்Ambient shape colorசுற்றுப்புற வடிவ நிறம்Emissive shape colorஉமிழும் வடிவ நிறம்Specular shape colorகண்கவர் வடிவ நிறம்Shape transparencyவடிவ வெளிப்படைத்தன்மைShape shininessவடிவ பளபளப்புOtherமற்றொன்றுLine colorவரி நிறம்Line widthLine width px pxDraw styleவரைதல் பாணிSolidதிடமானDashedகோடு போட்டதுDottedபுள்ளியிடப்பட்டDashDotDashDotDisplay modeகாட்சி முறைFlat Linesபிளாட் கோடுகள்Wireframeவயர்ஃப்ரேம்ShadedநிழலாடியதுFill the values below from a stored style presetசேமிக்கப்பட்ட நடை முன்னமைவிலிருந்து கீழே உள்ள மதிப்புகளை நிரப்பவும்Point colorபுள்ளி நிறம்Point sizeபுள்ளி அளவுPointsபிரிவகம்Shape colorவடிவ நிறம்AnnotationsAnnotationsExtension line lengthநீட்டிப்பு வரி நீளம்Extension line overshootநீட்டிப்பு வரி ஓவர்சூட்Text spacingஉரை இடைவெளிText colorஉரை நிறம்Dimensionsபரிமாணங்கள்Dotபுள்ளிAnnotationசிறுகுறிப்புTextsஉரைகள்Line spacing factorவரி இடைவெளி காரணிThe annotation scale multiplier is the inverse of the scale set in the
Annotation scale widget. If the scale is 1:100 the multiplier is 100.சிறுகுறிப்பு அளவு பெருக்கி என்பது, இல் அமைக்கப்பட்ட அளவின் தலைகீழ் ஆகும்
சிறுகுறிப்பு அளவிலான விட்செட். அளவுகோல் 1:100 என்றால் பெருக்கி 100 ஆகும்.Start arrow typeதொடக்க அம்பு வகைCircleவட்டம்Arrowஅம்புTickஉண்ணிTick-2டிக்-2Noneஎதுவுமில்லைStart arrow sizeதொடக்க அம்பு அளவுEnd arrow typeமுடிவு அம்புக்குறி வகைEnd arrow sizeஇறுதி அம்புக்குறி அளவுThe unit override for dimensions. Leave blank to use the current FreeCAD unit.அலகு பரிமாணங்களை மீறுகிறது. தற்போதைய FreeCAD யூனிட்டைப் பயன்படுத்த, காலியாக விடவும்.Dimension line overshootபரிமாணக் கோடு ஓவர்சூட்The distance the dimension line is extended past the extension linesபரிமாணக் கோடு நீட்டிப்புக் கோடுகளைத் தாண்டி நீட்டிக்கப்படும் தூரம்The color for texts, dimension texts and label textsஉரைகள், பரிமாண உரைகள் மற்றும் சிட்டை உரைகளுக்கான வண்ணம்Font nameஎழுத்துரு பெயர்The font for texts, dimensions and labelsஉரைகள், பரிமாணங்கள் மற்றும் லேபிள்களுக்கான எழுத்துருFont sizeFont sizeThe height for texts, dimension texts and label textsஉரைகள், பரிமாண உரைகள் மற்றும் சிட்டை உரைகளுக்கான உயரம்The line spacing for multi-line texts and labels (relative to the font size)பல வரி உரைகள் மற்றும் லேபிள்களுக்கான வரி இடைவெளி (எழுத்துரு அளவுடன் தொடர்புடையது)Scale multiplierஅளவு பெருக்கிLine and arrow colorகோடு மற்றும் அம்பு நிறம்Style Settingsநடை அமைப்புகள்Saves the current style as a presetதற்போதைய பாணியை முன்னமைவாகச் சேமிக்கிறதுShape Appearanceவடிவ தோற்றம்Lines and Arrowsகோடுகள் மற்றும் அம்புகள்Adds a unit symbol to dimension textsபரிமாண உரைகளுக்கு அலகு சின்னத்தைச் சேர்க்கிறதுThe length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.நீட்டிப்பு வரிகளின் நீளம். முழு நீட்டிப்பு வரிகளுக்கு 0 ஐப் பயன்படுத்தவும். எதிர்மறை மதிப்பு
நீட்டிப்பு கோடுகளின் முனைகளுக்கும் அளவிடப்பட்ட புள்ளிகளுக்கும் இடையிலான இடைவெளியை வரையறுக்கிறது.
நேர்மறை மதிப்பு நீட்டிப்பு வரிகளின் அதிகபட்ச நீளத்தை வரையறுக்கிறது. மட்டுமே பயன்படுத்தப்பட்டது
நேரியல் பரிமாணங்களுக்கு.The length of extension lines above the dimension lineபரிமாணக் கோட்டிற்கு மேலே உள்ள நீட்டிப்புக் கோடுகளின் நீளம்The space between the dimension line and the dimension textபரிமாணக் கோட்டிற்கும் பரிமாண உரைக்கும் இடையே உள்ள இடைவெளிApply the above style to selected object(s)தேர்ந்தெடுக்கப்பட்ட பொருள்(களுக்கு) மேலே உள்ள பாணியைப் பயன்படுத்தவும்Apply the above style to all annotations (texts, dimensions and labels)மேலே உள்ள நடையை அனைத்து சிறுகுறிப்புகளுக்கும் (உரைகள், பரிமாணங்கள் மற்றும் லேபிள்கள்) பயன்படுத்தவும்Show unitஅலகு காட்டுUnit overrideஅலகு மேலெழுதல்Selectedதேர்ந்தெடுக்கப்பட்டதுHatchகுஞ்சு பொரிக்கவும்PAT filePAT கோப்புPatternமுறைScaleஅளவுகோல்Rotationசுழற்சிAlign to faceமுகத்துடன் சீரமைக்கவும்Aligns the pattern with the base object.
Otherwise, the pattern aligns with the global coordinate system.
This setting modifies the Translate property.பேட்டர்னை அடிப்படை பொருளுடன் சீரமைக்கிறது.
இல்லையெனில், முறை உலகளாவிய ஒருங்கிணைப்பு அமைப்புடன் இணைகிறது.
இந்த அமைப்பு மொழியாக்கப் பண்புகளை மாற்றியமைக்கிறது.Pattern files (*.pat *.PAT)பேட்டர்ன் கோப்புகள் (*.pat *.PAT)Gui::Dialog::DlgSettingsDraftDefault working planeஇயல்புநிலை வேலை செய்யும் வானூர்திGeneralபொதுThe number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.உள் ஒருங்கிணைப்பு செயல்பாடுகளில் பயன்படுத்தப்படும் தசமங்களின் எண்ணிக்கை (எடுத்துக்காட்டாக 3 = 0.001).
6 மற்றும் 8 க்கு இடையில் உள்ள மதிப்புகள் பொதுவாக சிறந்த வர்த்தகமாக கருதப்படுகிறது.The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.புதிய காட்சிகளுக்கான இயல்புநிலை வேலை செய்யும் வானூர்தி. வேலை செய்யும் விமானத்தை "தானியங்கி" என அமைத்தால்
கட்டளை தொடங்கும் போதெல்லாம் தற்போதைய காட்சியுடன் தானாகவே சீரமைக்கும்.
கூடுதலாக, இது முன்தேர்ந்தெடுக்கப்பட்ட பிளானர் முகங்களுக்கு அல்லது பிளானரில் புள்ளிகள் இருக்கும் போது சீரமைக்கும்
கட்டளைகளின் போது முகங்கள் தேர்ந்தெடுக்கப்படுகின்றன.XY (Top)XY (மேல்)XZ (Front)XZ (முன்)YZ (Side)YZ (பக்க)If checked, a widget indicating the current working
plane orientation appears when picking pointsசரிபார்க்கப்பட்டால், தற்போதைய செயல்பாட்டைக் குறிக்கும் விட்செட்
புள்ளிகளை எடுக்கும்போது விமான நோக்குநிலை தோன்றும்If checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.சரிபார்த்தால், அடுக்குகள் கீழ்தோன்றும் பட்டியலில் குழுக்களும் அடங்கும்.
பொருள்கள் தானாகவே குழுக்களிலும் சேர்க்கப்படும்.Include groups in layer listஅடுக்கு பட்டியலில் குழுக்களைச் சேர்க்கவும்If checked, base objects, instead of created copies, are selected after copyingசரிபார்க்கப்பட்டால், உருவாக்கப்பட்ட நகல்களுக்குப் பதிலாக அடிப்படைப் பொருள்கள் நகலெடுத்த பிறகு தேர்ந்தெடுக்கப்படும்If checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.சரிபார்த்தால், வரைவு கட்டளைகள் வரைவு பொருள்களுக்குப் பதிலாக பகுதி முதன்மைகளை உருவாக்கும்.
இது முழுமையாக ஆதரிக்கப்படவில்லை என்பதை நினைவில் கொள்ளவும், மேலும் பல பொருட்களை திருத்து செய்ய முடியாது
வரைவு மாற்றம் கட்டளைகள்.Create Part primitives if possibleமுடிந்தால் பகுதி primitives உருவாக்கவும்If checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.சரிபார்த்தால், வரைவு தரமிறக்குதல் மற்றும் வரைவு மேம்படுத்தல் ஆகியவை முகத்தின் நிறத்தை வைத்திருக்கும்.
splitFaces மற்றும் makeShell விருப்பங்களுக்கு மட்டும்.Keep face colors during downgrade/upgradeதரமிறக்கும்/மேம்படுத்தும் போது முக வண்ணங்களை வைத்திருங்கள்If checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.சரிபார்த்தால், வரைவு தரமிறக்குதல் மற்றும் வரைவு மேம்படுத்தல் ஆகியவை முகப் பெயர்களை வைத்திருக்கும்.
splitFaces மற்றும் makeShell விருப்பங்களுக்கு மட்டும்.Keep face names during downgrade/upgradeதரமிறக்கம்/மேம்படுத்தும் போது முகப் பெயர்களை வைத்திருங்கள்This is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.எண்களை உள்ளிட்ட பிறகு, மவுச் செயலற்றதாக இருக்கும் போது இது தாமதமாகும்
எந்தவொரு ஒருங்கிணைப்பு துறையிலும் கைமுறையாக. இதை 0 ஆக அமைப்பது தாமதத்தை முடக்கும்.
1 இன் நேரந்தவறுகை அமைக்கப்பட்டால், எண் மதிப்பை உள்ளிட்ட பிறகு, மவுச் செய்யாது
சுட்டியை நகர்த்துவதைத் தவிர்க்க, ஒரு நொடியில் புலத்தைப் புதுப்பிக்கவும்
தற்செயலாக மற்றும் உள்ளிட்ட மதிப்பை மாற்றியமைக்கிறது.Edit node pick radiusமுனை தேர்வு ஆரம் திருத்தவும்The pick radius of edit nodesதிருத்த முனைகளின் தேர்வு ஆரம்Label prefix for clonesகுளோன்களுக்கான சிட்டை முன்னொட்டுThe default prefix added to the label of new clonesபுதிய குளோன்களின் லேபிளில் இயல்பு முன்னொட்டு சேர்க்கப்பட்டதுConstruction group labelகட்டுமான குழு சிட்டைThe default label for the construction geometry groupகட்டுமான வடிவியல் குழுவிற்கான இயல்புநிலை சிட்டைThe default color for Draft objects in construction modeகட்டுமான பயன்முறையில் வரைவு பொருள்களுக்கான இயல்புநிலை நிறம்Internal precision levelஉள் துல்லிய நிலைShow working plane orientationவேலை செய்யும் விமான நோக்குநிலையைக் காட்டுCommand Optionsகட்டளை விருப்பங்கள்If checked, instructions are displayed in the Report View when using Draft commandsசரிபார்த்தால், வரைவு கட்டளைகளைப் பயன்படுத்தும் போது, அறிக்கை காட்சியில் அறிவுறுத்தல்கள் காட்டப்படும்Show prompts in the Report Viewஅறிக்கைக் காட்சியில் அறிவுறுத்தல்களைக் காட்டுIf checked, Length input, instead of the X coordinate, will have the initial focus.
This allows indicating a direction and then type a distance.சரிபார்த்தால், ஃச் ஒருங்கிணைப்புக்குப் பதிலாக நீள உள்ளீடு, ஆரம்பக் கவனம் செலுத்தும்.
இது ஒரு திசையைக் குறிக்கவும் பின்னர் தூரத்தைத் தட்டச்சு செய்யவும் அனுமதிக்கிறது.Set focus on Length instead of X coordinateஃச் ஒருங்கிணைப்புக்குப் பதிலாக நீளத்தில் கவனம் செலுத்தவும்Select base objects after copyingநகலெடுத்த பிறகு அடிப்படை பொருட்களைத் தேர்ந்தெடுக்கவும்Maximum number of editable objectsதிருத்தக்கூடிய பொருட்களின் அதிகபட்ச எண்ணிக்கைConstructionகட்டுமானம்Construction geometry colorகட்டுமான வடிவியல் நிறம்Draft classic styleகிளாசிக் பாணி வரைவுBitsnpieces styleBitsnpieces பாணிVisualகாட்சிSVG PatternsSVG வடிவங்கள்SVG pattern sizeSVG வடிவ அளவுThe default size for SVG patterns. A higher value results in a denser pattern.SVG வடிவங்களுக்கான இயல்புநிலை அளவு. அதிக மதிப்பு அடர்த்தியான வடிவத்தில் விளைகிறது.Additional SVG pattern locationகூடுதல் SVG வடிவ இடம்An optional directory with custom SVG files containing
pattern definitions to be added to the standard patternsதனிப்பயன் SVG கோப்புகளைக் கொண்ட விருப்ப அடைவு
நிலையான வடிவங்களில் சேர்க்கப்பட வேண்டிய வடிவ வரையறைகள்Drawing View Line Definitionsகாட்சி வரி வரையறைகளை வரைதல்Dashed line definitionகோடு கோடு வரையறைAn SVG linestyle definitionஒரு SVG லைன் பாணி வரையறைDashdot line definitionடாச்டாட் வரி வரையறைDotted line definitionபுள்ளியிடப்பட்ட வரி வரையறைTexts and dimensionsஉரைகள் மற்றும் பரிமாணங்கள்Font sizeFont sizemmமிமீLines and Arrowsகோடுகள் மற்றும் அம்புகள்Start arrow typeதொடக்க அம்பு வகைThe default symbol displayed at the start of dimension linesபரிமாணக் கோடுகளின் தொடக்கத்தில் இயல்புநிலை குறியீடு காட்டப்படும்Noneஎதுவுமில்லைStart arrow sizeதொடக்க அம்பு அளவுThe default starting arrow sizeஇயல்புநிலை தொடக்க அம்புக்குறி அளவுEnd arrow typeமுடிவு அம்புக்குறி வகைThe default symbol displayed at the end of dimension linesபரிமாணக் கோடுகளின் முடிவில் இயல்புநிலை குறியீடு காட்டப்படும்End arrow sizeஇறுதி அம்புக்குறி அளவுThe default ending arrow sizeஇயல்புநிலை முடிவு அம்புக்குறி அளவுNumber of decimalsதசமங்களின் எண்ணிக்கைDimension Detailsபரிமாண விவரங்கள்Extension line overshootநீட்டிப்பு வரி ஓவர்சூட்Dimension line overshootபரிமாணக் கோடு ஓவர்சூட்The default annotation scale multiplier. This is the inverse of the scale set
in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100.இயல்புநிலை சிறுகுறிப்பு அளவு பெருக்கி. இது அளவுகோலின் தலைகீழ்
வரைவு அளவு விட்செட்டில். அளவுகோல் 1:100 என்றால் பெருக்கி 100 ஆகும்.Textsஉரைகள்The default height for texts, dimension texts and label textsஉரைகள், பரிமாண உரைகள் மற்றும் சிட்டை உரைகளுக்கான இயல்புநிலை உயரம்Line spacing factorவரி இடைவெளி காரணிThe default line spacing for multi-line texts and labels (relative to the font size)பல வரி உரைகள் மற்றும் லேபிள்களுக்கான இயல்புநிலை வரி இடைவெளி (எழுத்துரு அளவுடன் தொடர்புடையது)Scale multiplierஅளவு பெருக்கிTexts and Dimensionsஉரைகள் மற்றும் பரிமாணங்கள்AnnotationsAnnotationsFont nameஎழுத்துரு பெயர்The default font for texts, dimensions and labelsஉரைகள், பரிமாணங்கள் மற்றும் லேபிள்களுக்கான இயல்புநிலை எழுத்துருText colorஉரை நிறம்The default color for texts, dimension texts and label textsஉரைகள், பரிமாண உரைகள் மற்றும் சிட்டை உரைகளுக்கான இயல்புநிலை வண்ணம்If checked, the dimension line is displayed by defaultசரிபார்க்கப்பட்டால், பரிமாணக் கோடு முன்னிருப்பாகக் காட்டப்படும்Show dimension lineபரிமாணக் கோட்டைக் காட்டுLine widthLine widthThe default line widthஇயல்புநிலை வரி அகலம் px pxDotபுள்ளிCircleவட்டம்Arrowஅம்புTickஉண்ணிTick-2டிக்-2Line and arrow colorகோடு மற்றும் அம்பு நிறம்The default color for lines and arrowsகோடுகள் மற்றும் அம்புகளுக்கான இயல்புநிலை நிறம்Unitsஅலகுகள்If checked, a unit symbol is added to dimension texts by defaultசரிபார்க்கப்பட்டால், இயல்புநிலையாக பரிமாண உரைகளில் ஒரு யூனிட் அடையாளம் சேர்க்கப்படும்Show unitஅலகு காட்டுUnit overrideஅலகு மேலெழுதல்The default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.இயல்புநிலை அலகு பரிமாணங்களை மீறுகிறது. m போன்ற ஒரு அலகு உள்ளிடவும்
அல்லது செ.மீ., FreeCAD இல் வரையறுக்கப்பட்ட தற்போதைய அலகு பயன்படுத்த காலியாக விடவும்.The default number of decimal places for dimension textsபரிமாண உரைகளுக்கான தசம இடங்களின் இயல்புநிலை எண்The optional string inserted between the feet and inches values in dimensionsபரிமாணங்களில் அடி மற்றும் அங்குல மதிப்புகளுக்கு இடையில் செருகப்பட்ட விருப்ப சரம்The default distance the dimension line is extended past the extension linesபரிமாணக் கோட்டின் இயல்புநிலை தூரம் நீட்டிப்புக் கோடுகளுக்கு அப்பால் நீட்டிக்கப்படுகிறதுExtension line lengthநீட்டிப்பு வரி நீளம்The default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.நீட்டிப்பு வரிகளின் இயல்புநிலை நீளம். முழு நீட்டிப்பு வரிகளுக்கு 0 ஐப் பயன்படுத்தவும். ஒரு எதிர்மறை
மதிப்பு நீட்டிப்புக் கோடுகளின் முனைகளுக்கும் அளவிடப்பட்டவற்றுக்கும் இடையே உள்ள இடைவெளியை வரையறுக்கிறது
புள்ளிகள். நேர்மறை மதிப்பு நீட்டிப்பு வரிகளின் அதிகபட்ச நீளத்தை வரையறுக்கிறது. மட்டுமே
நேரியல் பரிமாணங்களுக்கு பயன்படுத்தப்படுகிறது.The default length of extension lines above the dimension lineபரிமாணக் கோட்டிற்கு மேலே உள்ள நீட்டிப்புக் கோடுகளின் இயல்புநிலை நீளம்The default space between the dimension line and the dimension textபரிமாணக் கோட்டிற்கும் பரிமாண உரைக்கும் இடையே உள்ள இயல்புநிலை இடைவெளிText spacingஉரை இடைவெளிFeet separatorஅடி பிரிப்பான்SVGSVGImport styleஇறக்குமதி பாணிUse default style from Part/PartDesignபகுதி/பகுதிவடிவமைப்பிலிருந்து இயல்புநிலை பாணியைப் பயன்படுத்தவும்Use original SVG styleஅசல் SVG பாணியைப் பயன்படுத்தவும்If checked, no unit conversion will occur.
One unit in the SVG file will be interpreted as one millimeter.சரிபார்த்தால், அலகு மாற்றம் ஏற்படாது.
SVG கோப்பில் உள்ள ஒரு அலகு ஒரு மில்லிமீட்டராக விளக்கப்படும்.Disable unit scalingஅலகு அளவிடுதலை முடக்குAdd wires for invalid facesதவறான முகங்களுக்கு கம்பிகளைச் சேர்க்கவும்Method for importing SVG object colorsSVG பொருள் வண்ணங்களை இறக்குமதி செய்வதற்கான முறைIf face generation results in a degenerated face,
a raw wire from the original shape is addedமுகத்தை உருவாக்குவதால் முகம் சிதைந்தால்,
அசல் வடிவத்திலிருந்து ஒரு மூல கம்பி சேர்க்கப்படுகிறதுCheck to cut shapes according to the even/odd SVG fill ruleசம/ஒற்றைப்படை SVG நிரப்பு விதியின்படி வடிவங்களை வெட்டுவதைச் சரிபார்க்கவும்Apply Cutsவெட்டுக்களைப் பயன்படுத்துங்கள்Coordinate precision (crucial for detecting closed paths)ஒருங்கிணைப்பு துல்லியம் (மூடிய பாதைகளைக் கண்டறிவதில் முக்கியமானது)The number of decimal places used in internal coordinate operations (for example 3 = 0.001).
The optimal value depends on the absolute size of the import. Typical values are between 1 and 5.உள் ஒருங்கிணைப்பு செயல்பாடுகளில் பயன்படுத்தப்படும் தசம இடங்களின் எண்ணிக்கை (எடுத்துக்காட்டாக 3 = 0.001).
உகந்த மதிப்பு இறக்குமதியின் முழுமையான அளவைப் பொறுத்தது. வழக்கமான மதிப்புகள் 1 முதல் 5 வரை இருக்கும்.Export styleஏற்றுமதி நடைStyle of SVG file to write when exporting a sketchச்கெட்சை ஏற்றுமதி செய்யும் போது எழுத SVG கோப்பின் நடைTranslated (for print & display)மொழிபெயர்க்கப்பட்டது (அச்சு மற்றும் காட்சிக்கு)Raw (for CAM)ரா (CAMக்கு)All white lines will appear in black in the SVG for better readability against white backgroundsவெள்ளை பின்னணியில் சிறந்த வாசிப்புத்திறனுக்காக அனைத்து வெள்ளை கோடுகளும் SVG இல் கருப்பு நிறத்தில் தோன்றும்Convert white line color to blackவெள்ளை வரி நிறத்தை கருப்பு நிறமாக மாற்றவும்Maximum segment length for discretized arcsதனிமைப்படுத்தப்பட்ட வளைவுகளுக்கான அதிகபட்ச பிரிவு நீளம்Versions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.பதிப்பு 6.8 ஐ விட பழைய OpenCASCADE பதிப்புகள் ஆர்க் ப்ரொசெக்சனை ஆதரிக்காது.
இந்த வழக்கில் வளைவுகள் சிறிய வரி பிரிவுகளாக பிரிக்கப்படும்.
இந்த மதிப்பு அதிகபட்ச பிரிவு நீளம்.OCAOCAImport Optionsஇறக்குமதி விருப்பங்கள்Imports the areas (3D faces) tooபகுதிகளையும் (3D முகங்கள்) இறக்குமதி செய்கிறதுImport OCA areasOCA பகுதிகளை இறக்குமதி செய்யவும்DXFDXFAllow FreeCAD to automatically download and update the DXF librariesDXF நூலகங்களை தானாகவே பதிவிறக்கம் செய்து புதுப்பிக்க FreeCAD ஐ அனுமதிக்கவும்Importஇறக்குமதிAll objects containing faces will be exported as 3D polyface meshesமுகங்களைக் கொண்ட அனைத்து பொருட்களும் 3D பாலிஃபேச் மெச்களாக ஏற்றுமதி செய்யப்படும்Project exported objects along current view directionதற்போதைய காட்சி திசையில் பொருள்களை ஏற்றுமதி செய்த திட்டம்Use colors from the DXF fileDXF கோப்பிலிருந்து வண்ணங்களைப் பயன்படுத்தவும்Join geometryவடிவவியலில் சேரவும்Use standard font size for textsஉரைகளுக்கு நிலையான எழுத்துரு அளவைப் பயன்படுத்தவும்Render polylines with widthஅகலத்துடன் பாலிலைன்களை வழங்குதல் செய்யவும்Ellipse export is poorly supported. Use this to export them as polylines instead.எலிப்ச் ஏற்றுமதி மோசமாக ஆதரிக்கப்படுகிறது. அதற்குப் பதிலாக பாலிலைன்களாக ஏற்றுமதி செய்ய இதைப் பயன்படுத்தவும்.Treat ellipses and splines as polylinesநீள்வட்டங்கள் மற்றும் ச்ப்லைன்களை பாலிலைன்களாகக் கருதுங்கள்If checked, this preferences dialog will be shown each time you import or export
a DXF file.சரிபார்க்கப்பட்டால், ஒவ்வொரு முறையும் நீங்கள் இறக்குமதி அல்லது ஏற்றுமதி செய்யும் போது இந்த விருப்பத்தேர்வுகள் உரையாடல் காண்பிக்கப்படும்
ஒரு DXF கோப்பு.Show the importer dialog when importing a fileகோப்பை இறக்குமதி செய்யும் போது இறக்குமதியாளர் உரையாடலைக் காட்டுUse the legacy Python importer. This importer is more feature-complete but slower and requires an external library.பாரம்பரிய பைதான் இறக்குமதியாளரைப் பயன்படுத்தவும். இந்த இறக்குமதியாளர் அதிக அம்சம்-முழுமையானவர் ஆனால் மெதுவானவர் மற்றும் வெளிப்புற நூலகம் தேவை.Use legacy importerமரபு இறக்குமதியாளரைப் பயன்படுத்தவும்Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library.பாரம்பரிய பைதான் ஏற்றுமதியாளரைப் பயன்படுத்தவும். இந்த ஏற்றுமதியாளர் அதிக நற்பொருத்தம் கொண்டவர், ஆனால் மெதுவானவர் மற்றும் வெளிப்புற நூலகம் தேவை.Use legacy exporterமரபு ஏற்றுமதியாளரைப் பயன்படுத்தவும்Automatic Update (Legacy Only)தானியங்கு புதுப்பிப்பு (மரபு மட்டும்)If checked, FreeCAD is allowed to download and update the Python libraries
required by the legacy importer. This can also be done manually by installing
the 'dxf_library' addon from the Addon Manager.சரிபார்க்கப்பட்டால், பைதான் நூலகங்களைப் பதிவிறக்கம் செய்து புதுப்பிக்க FreeCAD அனுமதிக்கப்படுகிறது
மரபு இறக்குமதியாளர் தேவை. இதை நிறுவுவதன் மூலம் கைமுறையாகவும் செய்யலாம்
Addon மேலாளரிடமிருந்து 'dxf_library' addon.Import Asஎன இறக்குமதி செய்யவும்Creates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench. முழு அளவுரு வரைவு பொருள்களை உருவாக்குகிறது. தொகுதி வரையறைகள் இவ்வாறு இறக்குமதி செய்யப்படுகின்றன
மீண்டும் பயன்படுத்தக்கூடிய பொருள்கள் (பகுதி கலவைகள்) மற்றும் நிகழ்வுகள் `ஆப்::இணைப்பு` பொருள்களாக மாறும்,
தொகுதி கட்டமைப்பை பராமரித்தல். வரைவுடன் முழு ஒருங்கிணைப்புக்கு சிறந்தது
பணிமனை.Editable Draft objects (highest fidelity, slowest)திருத்தக்கூடிய வரைவு பொருள்கள் (அதிக நம்பகத்தன்மை, மெதுவாக)DxfImportModeDxfImportModeCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing and Part workbench integration.அளவுரு பகுதி பொருட்களை உருவாக்குகிறது (எ.கா., பகுதி::கோடு, பகுதி::வட்டம்). தடு
வரையறைகள் மீண்டும் பயன்படுத்தக்கூடிய பொருள்கள் (பகுதி கலவைகள்) மற்றும் நிகழ்வுகளாக இறக்குமதி செய்யப்படுகின்றன
`ஆப்::லிங்க்` ஆப்செக்ட்களாகி, பிளாக் கட்டமைப்பைப் பராமரிக்கிறது. சிறந்தது
ச்கிரிப்ட் அடிப்படையிலான பிந்தைய செயலாக்கம் மற்றும் பகுதி பணியிட ஒருங்கிணைப்பு.Editable Part primitives (high fidelity, slower)திருத்தக்கூடிய பகுதி பழமையானது (அதிக நம்பகத்தன்மை, மெதுவாக)Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.ஒவ்வொரு DXF நிறுவனத்திற்கும் அளவுரு அல்லாத வடிவத்தை உருவாக்குகிறது. தொகுதி வரையறைகள்
மீண்டும் பயன்படுத்தக்கூடிய பொருள்களாக (பகுதி கலவைகள்) இறக்குமதி செய்யப்பட்டு, 'ஆப்::இணைப்பு'
பொருள்கள், தொகுதி கட்டமைப்பை பராமரித்தல். குறிப்பிடுவதற்கும் அளவிடுவதற்கும் நல்லது.Individual Part shapes (balanced, recommended)தனிப்பட்ட பகுதி வடிவங்கள் (சமச்சீர், பரிந்துரைக்கப்படுகிறது)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for importing and viewing very large files with maximum performance.ஒரு அடுக்கில் உள்ள அனைத்து வடிவவியலையும் ஒற்றை, திருத்த முடியாத வடிவத்தில் ஒன்றிணைக்கிறது. தடு
கட்டமைப்புகள் பாதுகாக்கப்படவில்லை; அவற்றின் வடிவியல் அடுக்குகளின் ஒரு பகுதியாக மாறும்
வடிவம். அதிகபட்ச செயல்திறன் கொண்ட மிகப் பெரிய கோப்புகளை இறக்குமதி செய்வதற்கும் பார்ப்பதற்கும் சிறந்தது.Fused Part shapes (lowest fidelity, fastest)இணைந்த பகுதி வடிவங்கள் (குறைந்த நம்பகத்தன்மை, வேகமாக)Import Settingsஇறக்குமதி அமைப்புகள்Global scaling factorஉலகளாவிய அளவிடுதல் காரணிScale factor to apply to DXF files on import. The factor is the conversion
between the DXF file's unit and millimeters. Example: for files in
millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4,
in feet: 304.8இறக்குமதியில் DXF கோப்புகளுக்குப் பயன்படுத்துவதற்கான அளவுகோல். காரணி மாற்றமாகும்
DXF கோப்பின் அலகுக்கும் மில்லிமீட்டருக்கும் இடையில். எடுத்துக்காட்டு: உள்ள கோப்புகளுக்கு
மில்லிமீட்டர்கள்: 1, சென்டிமீட்டரில்: 10, மீட்டரில்: 1000, அங்குலங்களில்: 25.4,
அடிகளில்: 304.8If checked, text, mtext, and dimension entities will be imported as Draft objectsசரிபார்த்தால், உரை, mtext மற்றும் பரிமாணப் பொருள்கள் வரைவுப் பொருள்களாக இறக்குமதி செய்யப்படும்If checked, point entities will be importedசரிபார்க்கப்பட்டால், புள்ளி நிறுவனங்கள் இறக்குமதி செய்யப்படும்PointsPointsIf checked, entities from the paper space will also be imported. By default,
only model space is importedசரிபார்க்கப்பட்டால், காகித இடத்திலிருந்து பொருட்கள் இறக்குமதி செய்யப்படும். இயல்பாக,
மாதிரி இடம் மட்டுமே இறக்குமதி செய்யப்படுகிறதுPaper space objectsகாகித விண்வெளி பொருள்கள்If checked, anonymous blocks (whose names begin with *) will also be imported.
These are often used for hatches and dimensionsசரிபார்க்கப்பட்டால், அநாமதேய தொகுதிகள் (இதன் பெயர்கள் * உடன் தொடங்கும்) இறக்குமதி செய்யப்படும்.
இவை பெரும்பாலும் குஞ்சுகள் மற்றும் பரிமாணங்களுக்கு பயன்படுத்தப்படுகின்றனAnonymous blocks (*-blocks)அநாமதேய தொகுதிகள் (*-blocks)If checked, the boundaries of hatch objects will be imported as closed wires.
(Legacy importer only)சரிபார்க்கப்பட்டால், அட்ச் பொருட்களின் எல்லைகள் மூடிய கம்பிகளாக இறக்குமதி செய்யப்படும்.
(மரபு இறக்குமதியாளர் மட்டும்)Hatch boundariesஅட்ச் எல்லைகள்Appearanceதோற்றம்If checked, colors will be set as specified in the DXF file whenever
possible. Otherwise, default FreeCAD colors are appliedசரிபார்க்கப்பட்டால், DXF கோப்பில் குறிப்பிடப்பட்ட வண்ணங்கள் எப்போது வேண்டுமானாலும் அமைக்கப்படும்
நிகழக்கூடிய. இல்லையெனில், இயல்புநிலை FreeCAD வண்ணங்கள் பயன்படுத்தப்படும்If checked, imported texts will get the standard Draft text size, instead of
the size defined in the DXF document. (Legacy importer only)சரிபார்க்கப்பட்டால், இறக்குமதி செய்யப்பட்ட உரைகள் நிலையான வரைவு உரை அளவைப் பெறும்
DXF ஆவணத்தில் வரையறுக்கப்பட்ட அளவு. (மரபு இறக்குமதியாளர் மட்டும்)Advanced processingமேம்பட்ட செயலாக்கம்If checked, the legacy importer will attempt to join coincident geometric
objects into wires. This can be slow for large files. (Legacy importer only)சரிபார்க்கப்பட்டால், மரபு இறக்குமதியாளர் தற்செயலான வடிவவியலில் சேர முயற்சிப்பார்
கம்பிகளாக பொருள்கள். பெரிய கோப்புகளுக்கு இது மெதுவாக இருக்கலாம். (மரபு இறக்குமதியாளர் மட்டும்)If checked, polylines that have a width property will be rendered as faces
representing that width. (Legacy importer only)சரிபார்க்கப்பட்டால், அகலப் பண்பு கொண்ட பாலிலைன்கள் முகங்களாக வழங்கப்படும்
அந்த அகலத்தை குறிக்கும். (மரபு இறக்குமதியாளர் மட்டும்)If checked, the legacy importer will attempt to create Sketcher objects
instead of Draft or Part objects. This overrides the 'Import As' settingசரிபார்க்கப்பட்டால், மரபு இறக்குமதியாளர் ச்கெட்சர் பொருட்களை உருவாக்க முயற்சிப்பார்
வரைவு அல்லது பகுதி பொருள்களுக்கு பதிலாக. இது 'இறக்குமதி என' அமைப்பை மீறுகிறதுCreate sketchesஓவியங்களை உருவாக்கவும்Export Optionsஏற்றுமதி விருப்பங்கள்Maximum spline segmentஅதிகபட்ச ச்ப்லைன் பிரிவுMaximum length of each of the polyline segments. '0' treats the whole spline as a straight segment.ஒவ்வொரு பாலிலைன் பிரிவுகளின் அதிகபட்ச நீளம். '0' முழு ச்ப்லைனையும் நேரான பிரிவாகக் கருதுகிறது.Export 3D objects as polyface meshes3D பொருட்களை பாலிஃபேச் மெச்களாக ஏற்றுமதி செய்யவும்TechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.TechDraw காட்சிகள் தொகுதிகளாக ஏற்றுமதி செய்யப்படும்.
பிந்தைய DXF R12 டெம்ப்ளேட்டுகளுக்கு இது தோல்வியடையக்கூடும்.Export TechDraw Views as blocksTechDraw காட்சிகளை தொகுதிகளாக ஏற்றுமதி செய்யவும்Exported objects will be projected to reflect the current view directionஏற்றுமதி செய்யப்பட்ட பொருள்கள் தற்போதைய பார்வை திசையை பிரதிபலிக்கும் வகையில் திட்டமிடப்படும்ShiftShiftAlways snapஎப்போதும் ஒடிGrid and Snappingகட்டம் மற்றும் ச்னாப்பிங்If checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if "Show grid border" is enabled.சரிபார்க்கப்பட்டால், கீழே இடதுபுறத்தில் மனித உருவத்தின் அவுட்லைன் காட்டப்படும்
கட்டத்தின் மூலையில். "கட்டம் பார்டரைக் காட்டு" இயக்கப்பட்டிருந்தால் மட்டுமே பயனுள்ளதாக இருக்கும்.Major lines everyமுக்கிய வரிகள் ஒவ்வொன்றும்The number of squares between major grid lines.
Major grid lines are thicker than minor grid lines.முக்கிய கட்டக் கோடுகளுக்கு இடையே உள்ள சதுரங்களின் எண்ணிக்கை.
மேசர் கிரிட் கோடுகள் மைனர் கிரிட் கோடுகளை விட தடிமனாக இருக்கும். squaresசதுரங்கள்Snapping and Modifier Keysச்னாப்பிங் மற்றும் மாற்றியமைக்கும் விசைகள்Snap modifierச்னாப் மாற்றிThe Snap modifier keyச்னாப் மாற்றி விசைCtrlCtrlAltAltConstrain modifierகட்டுப்பாடு மாற்றிAlt modifierஎல்லாம் மாற்றியமைப்பவர்The Alt modifier key. The function of this key depends on the command.மாற்று மாற்றி விசை. இந்த விசையின் செயல்பாடு கட்டளையைப் பொறுத்தது.If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.சரிபார்த்தால், கட்டம் எப்போதும் புதிய காட்சிகளில் தெரியும்.
செயலில் உள்ள காட்சிக்கு இதை மாற்ற வரைவு ToggleGrid ஐப் பயன்படுத்தவும்.The distance between grid linesகட்டக் கோடுகளுக்கு இடையே உள்ள தூரம்The maximum number of objects Draft Edit is allowed to process at the same timeஅதிகபட்ச எண்ணிக்கையிலான பொருள்கள் வரைவு திருத்தம் ஒரே நேரத்தில் செயலாக்க அனுமதிக்கப்படுகிறதுGridகட்டம்Always show the gridஎப்போதும் கட்டத்தைக் காட்டுIf checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.சரிபார்க்கப்பட்டால், புதிய காட்சிகளில் கட்டளைகளின் போது கட்டம் தெரியும்.
செயலில் உள்ள காட்சிக்கு இதை மாற்ற வரைவு ToggleGrid ஐப் பயன்படுத்தவும்.Show the grid during commandsகட்டளைகளின் போது கட்டத்தைக் காட்டுIf checked, an additional border is displayed around the grid,
showing the main square size in the bottom left cornerசரிபார்க்கப்பட்டால், கட்டத்தைச் சுற்றி கூடுதல் பார்டர் காட்டப்படும்,
கீழ் இடது மூலையில் முதன்மையான சதுர அளவைக் காட்டுகிறதுShow grid borderகட்டக் கரையைக் காட்டுShow human figureமனித உருவத்தைக் காட்டுIf checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate systemசரிபார்க்கப்பட்டால், கட்டத்தின் இரண்டு முக்கிய அச்சுகள் சிவப்பு, பச்சை அல்லது நீல நிறத்தில் இருக்கும்
அவை உலகளாவிய ஒருங்கிணைப்பு அமைப்பின் X, ஒய் அல்லது சட் அச்சுடன் பொருந்தினால்Use colored axesவண்ண அச்சுகளைப் பயன்படுத்தவும்Grid spacingகட்ட இடைவெளிGrid sizeகட்ட அளவுThe number of squares in the X- and Y-direction of the gridகட்டத்தின் X- மற்றும் ஒய் திசையில் உள்ள சதுரங்களின் எண்ணிக்கைGrid transparencyகிரிட் வெளிப்படைத்தன்மை %%Grid colorகட்டம் நிறம்The constrain modifier keyகட்டுப்பாடு மாற்றி விசைSnap symbol styleச்னாப் சிம்பல் பாணிMouse delayசுட்டி நேரந்தவறுகை secondsவினாடிகள்The style for snap symbolsச்னாப் சின்னங்களுக்கான பாணிSnap symbol colorச்னாப் சின்னத்தின் நிறம்The color for snap symbolsச்னாப் சின்னங்களுக்கான நிறம்If checked, snapping is activated without the need to press the Snap modifier keyசரிபார்த்தால், Snap modifier விசையை அழுத்த வேண்டிய அவசியமின்றி ச்னாப்பிங் செயல்படுத்தப்படும்The color of the gridகட்டத்தின் நிறம்The overall transparency of the gridகட்டத்தின் ஒட்டுமொத்த வெளிப்படைத்தன்மைDWGDWGThis is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.DWG கோப்புகளை DXF ஆக மாற்ற FreeCAD பயன்படுத்தும் முறை இதுவாகும். "தானியங்கி" தேர்ந்தெடுக்கப்பட்டால், FreeCAD பின்வரும் மாற்றிகளில் ஒன்றை இங்கே காட்டப்பட்டுள்ள அதே வரிசையில் கண்டுபிடிக்க முயற்சிக்கும். FreeCAD ஆல் எதையும் கண்டுபிடிக்க முடியவில்லை என்றால், நீங்கள் ஒரு குறிப்பிட்ட மாற்றியைத் தேர்ந்தெடுத்து அதன் பாதையை இங்கே கீழே குறிப்பிட வேண்டும். LibreDWG ஐப் பயன்படுத்தினால் "dwg2dxf" பயன்பாடு, ODA கோப்பு மாற்றியைப் பயன்படுத்தினால் "ODAFileConverter" அல்லது QCAD இன் சார்பு பதிப்பைப் பயன்படுத்தினால் "dwg2dwg" பயன்பாடு ஆகியவற்றைத் தேர்ந்தெடுக்கவும்.AutomaticAutomaticDWG ConversionDWG மாற்றம்Conversion methodமாற்றும் முறைLibreDWGLibreDWGODA ConverterODA மாற்றிQCAD proQCAD சார்புPath to file converterகோப்பு மாற்றிக்கான பாதைThe path to your DWG file converter executableஉங்கள் DWG கோப்பு மாற்றி இயங்கக்கூடிய பாதை<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html><html><head/><body><p><span style=" font-weight:600;">குறிப்பு:</span> DXF விருப்பங்கள் DWG கோப்புகளுக்கும் பொருந்தும்.</p></body></html>Relativeஉறவினர்Rஆர்Continueதொடரவும்CloseமூடுOஓCopyநகலெடுLஎல்Interfaceஇடைமுகம்Fஎஃப்Select edgeவிளிம்பைத் தேர்ந்தெடுக்கவும்Subelement modeதுணை உறுப்பு ஃபேசன்BபிCசிExitவெளியேறுAஏIncrease radiusஆரம் அதிகரிக்கவும்Decrease radiusஆரம் குறைக்கவும்EஇQகேLengthநீளம்Wipeதுடைக்கவும்Wடபிள்யூUஉGlobalஉலகளாவியIn-Command Shortcutsகட்டளை குறுக்குவழிகள்GஐயாMake faceமுகத்தை உருவாக்குங்கள்Undoசெயல்தவிர்Nஎன்Cycle snapசைக்கிள் ச்னாப்Add holdபிடியைச் சேர்க்கவும்Set working planeவேலை செய்யும் விமானத்தை அமைக்கவும்Snapச்னாப்Sஎச்Restrict XXஐக் கட்டுப்படுத்துXஃச்Restrict Yஒய்Yஒய்Restrict Zசட் கட்டுப்படுத்தவும்Zசட்Recenterமிக அண்மைக் காலத்தில்DடிUI Optionsஇடைமுகம் விருப்பங்கள்If checked, the Draft Snap toolbar will only be visible during commandsசரிபார்க்கப்பட்டால், Draft Snap கருவிப்பட்டி கட்டளைகளின் போது மட்டுமே தெரியும்Only show the Draft Snap toolbar during commandsகட்டளைகளின் போது Draft Snap கருவிப்பட்டியை மட்டும் காட்டவும்If checked, the Draft Snap Widget is displayed in the Draft Status Barசரிபார்த்தால், வரைவு ச்னாப் விட்செட் வரைவு நிலைப் பட்டியில் காட்டப்படும்Show the Draft Snap Widget in the Draft Workbenchவரைவு ஒர்க் பெஞ்சில் வரைவு ச்னாப் விட்செட்டைக் காட்டுIf checked, the Draft Scale Widget is displayed in the Draft Status Barசரிபார்க்கப்பட்டால், வரைவு அளவு விட்செட் வரைவு நிலைப் பட்டியில் காட்டப்படும்Show the Draft Scale Widget in the Draft Workbenchவரைவு அளவு விட்செட்டை வரைவு வொர்க் பெஞ்சில் காட்டுdraftRelativeஉறவினர்GlobalஉலகளாவியContinueதொடரவும்If checked, the command will not finish until pressing the command button againசரிபார்க்கப்பட்டால், கட்டளை பொத்தானை மீண்டும் அழுத்தும் வரை கட்டளை முடிவடையாதுIf checked, the next dimension will be placed in a chain with the previously placed Dimensionசரிபார்க்கப்பட்டால், அடுத்த பரிமாணம் முன்பு வைக்கப்பட்ட பரிமாணத்துடன் ஒரு சங்கிலியில் வைக்கப்படும்CloseமூடுSet Working Planeவேலை செய்யும் விமானத்தை அமைக்கவும்Select Edgeவிளிம்பைத் தேர்ந்தெடுக்கவும்CopyநகலெடுWipeதுடைக்கவும்All shapes must be coplanarஅனைத்து வடிவங்களும் கோப்லனராக இருக்க வேண்டும்Selected shapes must define a planeதேர்ந்தெடுக்கப்பட்ட வடிவங்கள் ஒரு விமானத்தை வரையறுக்க வேண்டும்Topமேல்Frontமுன்Sideபக்கம்Autoதானியங்குCurrent working plane: Autoதற்போது வேலை செய்யும் விமானம்: ஆட்டோCurrent working plane:தற்போது வேலை செய்யும் விமானம்:Selected shapes do not define a planeதேர்ந்தெடுக்கப்பட்ட வடிவங்கள் ஒரு விமானத்தை வரையறுக்கவில்லைNo previous working planeமுன்பு வேலை செய்யும் வானூர்தி இல்லைNo next working planeஅடுத்து வேலை செய்யும் வானூர்தி இல்லைAxes:அச்சுகள்:Position:நிலை:Noneஎதுவுமில்லைactive command:செயலில் உள்ள கட்டளை:Active Draft commandசெயலில் உள்ள வரைவு கட்டளைX coordinate of the pointபுள்ளியின் ஃச் ஒருங்கிணைப்புXஃச்Yஒய்Zசட்LengthLengthAngleகோணம்Radiusஆரம்Creates the text object and finishes the commandஉரை பொருளை உருவாக்கி கட்டளையை முடிக்கிறதுChanges the default style for new objectsபுதிய பொருள்களுக்கான இயல்புநிலை பாணியை மாற்றுகிறதுToggles construction modeகட்டுமானப் பயன்முறையை மாற்றுகிறதுLabel Typeசிட்டை வகைRadius of Circleவட்டத்தின் ஆரம்Coordinates relative to last point or to coordinate system origin
if is the first point to setகடைசி புள்ளியுடன் தொடர்புடைய ஆயத்தொகுப்புகள் அல்லது அமைப்பின் தோற்றத்தை ஒருங்கிணைக்க
அமைக்க முதல் புள்ளி என்றால்Y coordinate of the pointபுள்ளியின் ஒய் ஒருங்கிணைப்புZ coordinate of the pointபுள்ளியின் சட் ஒருங்கிணைப்புEnter Pointபுள்ளியை உள்ளிடவும்Length of the current segmentதற்போதைய பிரிவின் நீளம்Angle of the current segmentதற்போதைய பிரிவின் கோணம்Locks the current angleதற்போதைய கோணத்தை பூட்டுகிறதுRadius of the circleவட்டத்தின் ஆரம்Coordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemஉலகளாவிய ஒருங்கிணைப்பு அமைப்புடன் தொடர்புடைய ஒருங்கிணைப்புகள்.
வேலை செய்யும் விமான ஒருங்கிணைப்பு அமைப்பைப் பயன்படுத்த தேர்வுநீக்கவும்Finishமுடிக்கவும்Finishes the current drawing or editing operationதற்போதைய வரைதல் அல்லது திருத்துதல் செயல்பாட்டை முடிக்கிறதுModify Objectsபொருட்களை மாற்றவும்Facebinder Elementsஃபேச்பைண்டர் கூறுகள்If checked, an OCC-style offset will be performed instead of the classic offsetசரிபார்க்கப்பட்டால், கிளாசிக் ஆஃப்செட்டுக்குப் பதிலாக OCC-பாணி ஆஃப்செட் செய்யப்படும்OCC-style offsetOCC பாணி ஆஃப்செட்UndoUndoIf checked, objects will be copied instead of movedசரிபார்த்தால், பொருள்கள் நகர்த்தப்படுவதற்குப் பதிலாக நகலெடுக்கப்படும்Undo the last segmentகடைசி பிரிவை செயல்தவிர்க்கவும்Enter a point with given coordinatesகொடுக்கப்பட்ட ஆயங்களுடன் ஒரு புள்ளியை உள்ளிடவும்Make faceMake faceIf checked, the object will be filled with a face.
Not available if the 'Use Part Primitives' preference is enabledசரிபார்த்தால், பொருள் முகத்தால் நிரப்பப்படும்.
'பகுதி முதன்மைகளைப் பயன்படுத்து' விருப்பம் இயக்கப்பட்டிருந்தால் கிடைக்காதுChained modeசங்கிலி முறைFinishes and closes the current lineதற்போதைய வரியை முடித்து மூடுகிறதுWipes the existing segments of this line and starts again from the last pointஇந்த வரியின் ஏற்கனவே உள்ள பகுதிகளைத் துடைத்து, கடைசி புள்ளியிலிருந்து மீண்டும் தொடங்குகிறதுReorients the working plane on the last segmentகடைசி பிரிவில் வேலை செய்யும் விமானத்தை மறுசீரமைக்கிறதுSelects an existing edge to be measured by this dimensionஇந்த பரிமாணத்தால் அளக்க ஏற்கனவே இருக்கும் விளிம்பைத் தேர்ந்தெடுக்கிறதுSidesபக்கங்கள்Number of sidesபக்கங்களின் எண்ணிக்கைModify subelementsதுணை உறுப்புகளை மாற்றவும்If checked, subelements will be modified instead of entire objectsசரிபார்க்கப்பட்டால், முழுப் பொருட்களுக்குப் பதிலாக துணை உறுப்புகள் மாற்றியமைக்கப்படும்Autogroup offஆட்டோகுரூப் ஆஃப்LineவரிDWireட்வயர்Circleவட்டம்ArcபரிதிRotateசுழற்றுPointபுள்ளியம்Labelசிட்டைOffsetஆஃப்செட்Distanceதூரம்Offset distanceஆஃப்செட் தூரம்Trimexடிரிமெக்ச்Local {}உள்ளக {}Global {}உலகளாவிய {}Autogroup:தன்னியக்க குழு:Facesமுகங்கள்Removeஅகற்றுAddசேர்DraftவரைவுConverting:மாற்றுகிறது:Conversion successfulமாற்றம் வெற்றிகரமாக உள்ளதுLibreDWG converter not foundLibreDWG மாற்றி காணப்படவில்லைODA converter not foundODA மாற்றி காணப்படவில்லைQCAD converter not foundQCAD மாற்றி கிடைக்கவில்லைNo suitable external DWG converter has been found.
Please set one manually under menu Edit → Preferences → Import/Export → DWG
For more information see:
https://wiki.freecad.org/Import_Export_Preferencesபொருத்தமான வெளிப்புற DWG மாற்றி எதுவும் கண்டறியப்படவில்லை.
மெனுவின் கீழ் கைமுறையாக ஒன்றை அமைக்கவும் திருத்து → விருப்பத்தேர்வுகள் → இறக்குமதி/ஏற்றுமதி → DWG
மேலும் தகவலுக்கு பார்க்கவும்:
https://wiki.freecad.org/Import_Export_PreferencesError during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.DWG மாற்றத்தின் போது பிழை.
DWG கோப்பை இடைவெளிகள் மற்றும் ஆங்கிலம் அல்லாத எழுத்துக்கள் இல்லாத அடைவுப் பாதைக்கு நகர்த்த முயற்சிக்கவும்,
அல்லது குறைந்த DWG பதிப்பில் சேமிக்க முயற்சிக்கவும்.Customதனிப்பயன்Unable to convert input into a scale factorஉள்ளீட்டை அளவுக் காரணியாக மாற்ற முடியவில்லைSet Custom Scaleதனிப்பயன் அளவை அமைக்கவும்Draft Scale WidgetA context menu action used to show or hide this toolbar widgetவரைவு அளவு விட்செட்Set the scale used by Draft annotation toolsவரைவு சிறுகுறிப்பு கருவிகள் பயன்படுத்தும் அளவை அமைக்கவும்Draft Snap WidgetA context menu action used to show or hide this toolbar widgetவரைவு ச்னாப் விட்செட்Set custom annotation scale in format x:x, x=xதனிப்பயன் சிறுகுறிப்பு அளவை x:x, x=x வடிவத்தில் அமைக்கவும்No active document. Aborting.செயலில் உள்ள ஆவணம் இல்லை. கருக்கலைப்பு.Wrong input: object {} not in document.தவறான உள்ளீடு: பொருள் {} ஆவணத்தில் இல்லை.Unable to insert new object into a scaled partஅளவிடப்பட்ட பகுதியில் புதிய பொருளைச் செருக முடியவில்லைSymbol not implemented. Using a default symbol.அடையாளம் செயல்படுத்தப்படவில்லை. இயல்புநிலை சின்னத்தைப் பயன்படுத்துதல்.image is Nullபடம் பூச்யமானதுfilename does not exist on the system or in the resource fileகோப்புப்பெயர் கணினியில் அல்லது ஆதாரக் கோப்பில் இல்லைunable to load textureஅமைப்பை ஏற்ற முடியவில்லைDoes not have 'ViewObject.RootNode'.'ViewObject.RootNode' இல்லை.Solids:திடப்பொருட்கள்:Faces:முகங்கள்:Wires:கம்பிகள்:Edges:விளிம்புகள்:Vertices:செங்குத்துகள்:Faceமுகம்Wireகம்பிdifferent typesபல்வேறு வகையானObjects have different placements. Distance between the two base points:பொருள்களுக்கு வெவ்வேறு இடங்கள் உள்ளன. இரண்டு அடிப்படை புள்ளிகளுக்கு இடையே உள்ள தூரம்:%s cannot be modified because its placement is readonly%sஐ மாற்ற முடியாது, ஏனெனில் அதன் இடம் படிக்க மட்டுமேThis function will be deprecated in {}. Please use '{}'.இந்தச் செயல்பாடு {} இல் நிறுத்தப்படும். தயவுசெய்து '{}' ஐப் பயன்படுத்தவும்.This function will be deprecated. Please use '{}'.இந்த செயல்பாடு நிராகரிக்கப்படும். தயவுசெய்து '{}' ஐப் பயன்படுத்தவும்.has a different valueவேறு மதிப்பு உள்ளதுdoesn't exist in one of the objectsஒரு பொருளில் இல்லை%s shares a base with %d other objects. Please check if you want to modify this.%s மற்ற %d பொருள்களுடன் ஒரு தளத்தைப் பகிர்ந்து கொள்கிறது. இதை மாற்ற வேண்டுமா என்று பார்க்கவும்.Wrong input: unknown document {}தவறான உள்ளீடு: தெரியாத ஆவணம் {}Pick target pointஇலக்கு புள்ளியைத் தேர்ந்தெடுக்கவும்Create Labelலேபிளை உருவாக்கவும்Pick endpoint of leader lineலீடர் கோட்டின் இறுதிப் புள்ளியைத் தேர்ந்தெடுக்கவும்Pick text positionஉரை நிலையைத் தேர்ந்தெடுக்கவும்Pick first pointமுதல் புள்ளியைத் தேர்ந்தெடுக்கவும்Edges do not intersect!விளிம்புகள் வெட்டுவதில்லை!Create Lineவரியை உருவாக்கவும்Create Wireகம்பியை உருவாக்கவும்%1 pick next point, snap to first point to close% 1 அடுத்த புள்ளியைத் தேர்ந்தெடுங்கள், மூடுவதற்கு முதல் புள்ளிக்குச் செல்லவும்%1 pick next point% 1 அடுத்த புள்ளியைத் தேர்ந்தெடுக்கவும்Unable to create a wire from the selected objectsதேர்ந்தெடுக்கப்பட்ட பொருட்களிலிருந்து கம்பியை உருவாக்க முடியவில்லைPolylineபாலிலைன்Pick next pointஅடுத்த புள்ளியைத் தேர்ந்தெடுக்கவும்Convert to Wireகம்பியாக மாற்றவும்Select an object to joinசேர ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Join Linesவரிகளில் சேரவும்Only Draft lines and wires can be joinedவரைவு கோடுகள் மற்றும் கம்பிகளை மட்டுமே இணைக்க முடியும்Selection:தேர்வு:Pick location pointஇருப்பிடப் புள்ளியைத் தேர்ந்தெடுக்கவும்Create Textஉரையை உருவாக்கவும்Select an object to convertமாற்றுவதற்கு ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Convert to Sketchச்கெட்சிற்கு மாற்றவும்Convert to Draftவரைவுக்கு மாற்றவும்Convert Draft/Sketchவரைவு/ச்கெட்சை மாற்றவும்Select an object to moveநகர்த்த ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Pick start pointதொடக்கப் புள்ளியைத் தேர்ந்தெடுக்கவும்Pick end pointஇறுதிப் புள்ளியைத் தேர்ந்தெடுக்கவும்No valid subelements selectedசரியான துணை உறுப்புகள் எதுவும் தேர்ந்தெடுக்கப்படவில்லைMoveநகர்த்தவும்Pick center pointமையப் புள்ளியைத் தேர்ந்தெடுக்கவும்Pick radiusஆரம் தேர்ந்தெடுStart angleதொடக்க கோணம்Pick start angleதொடக்கக் கோணத்தைத் தேர்ந்தெடுக்கவும்Aperture angleதுளை கோணம்Pick apertureதுளையைத் தேர்ந்தெடுக்கவும்%1 constrain% 1 கட்டுப்பாடு%1 snap% 1 ச்னாப்%1/%2/%3 switch constraint%1/%2/%3 சுவிட்ச் கட்டுப்பாடு%1 toggle relative% 1 உறவுமுறையை மாற்றவும்%1 toggle global% 1 உலகளாவிய நிலைமாற்றம்%1 toggle continue% 1 நிலைமாற்றம் தொடர்கிறது%1 pick center% 1 தேர்வு நடுவண்%1 pick radius% 1 தேர்வு ஆரம்%1 pick aperture% 1 தேர்வு துளைCreate Circle (Part)வட்டத்தை உருவாக்கு (பகுதி)Create Circleவட்டத்தை உருவாக்கவும்Create Arc (Part)ஆர்க்கை உருவாக்கு (பகுதி)Create Arcஆர்க் உருவாக்கவும்Pick aperture angleதுளை கோணத்தைத் தேர்ந்தெடுக்கவும்%1 pick start angle% 1 தொடக்கக் கோணத்தைத் தேர்ந்தெடுக்கவும்Arc From 3 Points3 புள்ளிகளில் இருந்து ஆர்க்Create Arc From 3 Points3 புள்ளிகளிலிருந்து ஆர்க்கை உருவாக்கவும்%1 pick first point% 1 முதல் புள்ளியைத் தேர்ந்தெடுக்கவும்%1 pick second point% 1 இரண்டாவது புள்ளியைத் தேர்ந்தெடுக்கவும்%1 pick third point% 1 மூன்றாவது புள்ளியைத் தேர்ந்தெடுக்கவும்Select an object to editதிருத்துவதற்கு ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Select a Draft object to editதிருத்துவதற்கு வரைவு பொருளைத் தேர்ந்தெடுக்கவும்Edit Nodeதிருத்து முனைToo many objects selected, maximum number set to:பல பொருள்கள் தேர்ந்தெடுக்கப்பட்டன, அதிகபட்ச எண் பின்வருமாறு அமைக்கப்பட்டுள்ளது:No edit point found for selected objectதேர்ந்தெடுக்கப்பட்ட பொருளுக்கு திருத்தப் புள்ளி இல்லை: this object is not editable: இந்த பொருளை திருத்த முடியாதுAnnotation Style Editorசிறுகுறிப்பு நடை எடிட்டர்New Styleபுதிய உடைStyle nameநடை பெயர்Style name requiredஉடை பெயர் தேவைNo style name specifiedபாணியின் பெயர் குறிப்பிடப்படவில்லைStyle existsஉடை உள்ளதுThis style name already existsஇந்த பாணி பெயர் ஏற்கனவே உள்ளதுStyle in useபயன்பாட்டில் உள்ள நடைThis style is used by some objects in this document. Proceed?இந்த ஆவணத்தில் உள்ள சில பொருட்களால் இந்த பாணி பயன்படுத்தப்படுகிறது. தொடரவா?Rename Styleஉடையை மறுபெயரிடவும்New nameபுதிய பெயர்Open Styles Fileநடைகள் கோப்பைத் திறக்கவும்JSON files (*.json *.JSON)சாதொபொகு கோப்புகள் (*.json *.JSON)Save Styles Fileபாங்குகள் கோப்பைச் சேமிக்கவும்JSON file (*.json)சாதொபொகு கோப்பு (*.json)Select an object to projectதிட்டத்திற்கு ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Create 2D View2D காட்சியை உருவாக்கவும்Create Pointபுள்ளியை உருவாக்கவும்%1 pick point% 1 தேர்வு புள்ளிSelect an object to rotateசுழற்ற ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Pick rotation centerசுழற்சி மையத்தைத் தேர்ந்தெடுக்கவும்Base angleஅடிப்படை கோணம்The base angle to start the rotation fromசுழற்சியைத் தொடங்குவதற்கான அடிப்படை கோணம்The amount of rotation to perform.
The final angle will be the base angle plus this amount.செய்ய வேண்டிய சுழற்சியின் அளவு.
இறுதிக் கோணம் அடிப்படைக் கோணமும் இந்தத் தொகையும் இருக்கும்.Pick base angleஅடிப்படை கோணத்தைத் தேர்ந்தெடுக்கவும்RotationRotationPick rotation angleசுழற்சி கோணத்தைத் தேர்ந்தெடுக்கவும்Add to New Groupபுதிய குழுவில் சேர்க்கவும்Add to Groupகுழுவில் சேர்க்கவும்No new selection. Select non-empty groups or objects inside groups.புதிய தேர்வு இல்லை. காலியாக இல்லாத குழுக்கள் அல்லது குழுக்களுக்குள் உள்ள பொருட்களைத் தேர்ந்தெடுக்கவும்.New Layerபுதிய அடுக்குLayer nameஅடுக்கு பெயர்LayerObject labelஅடுக்குNew layerபுதிய அடுக்குAdd to Construction Groupகட்டுமானக் குழுவில் சேர்க்கவும்New Groupபுதிய குழுGroup nameகுழுவின் பெயர்GroupObject labelகுழுNew named groupபுதிய பெயர் கொண்ட குழுUngroupகுழுவிலக்குGroupகுழுFillet radiusஃபில்லட் ஆரம்Radius of the filletஃபில்லட்டின் ஆரம்Enter radiusஆரம் உள்ளிடவும்Create Filletஃபில்லட்டை உருவாக்கவும்Fillet cannot be createdஃபில்லட்டை உருவாக்க முடியாதுPolygonபலகோணம்Create Polygon (Part)பலகோணத்தை உருவாக்கு (பகுதி)Create Polygonபலகோணத்தை உருவாக்கவும்Select objects to trim or extendஒழுங்கமைக்க அல்லது நீட்டிக்க பொருட்களைத் தேர்ந்தெடுக்கவும்This object is not supportedஇந்த பொருள் ஆதரிக்கப்படவில்லைOnly a single face can be extrudedஒரே ஒரு முகத்தை மட்டுமே வெளியேற்ற முடியும்Trimex does not support this object typeTrimex இந்த ஆப்செக்ட் வகையை ஆதரிக்கவில்லைUnable to trim these objects, only Draft wires and arcs are supportedஇந்த பொருட்களை ஒழுங்கமைக்க முடியவில்லை, வரைவு கம்பிகள் மற்றும் வளைவுகள் மட்டுமே ஆதரிக்கப்படுகின்றனThese objects do not intersectஇந்த பொருள்கள் வெட்டுவதில்லைToo many intersection pointsபல சந்திப்பு புள்ளிகள்Offset only works on one object at a timeஆஃப்செட் ஒரு நேரத்தில் ஒரு பொருளில் மட்டுமே வேலை செய்யும்Offset of Bézier curves is currently not supportedBézier வளைவுகளின் ஆஃப்செட் தற்போது ஆதரிக்கப்படவில்லைPick distanceதூரத்தை தேர்வு செய்யவும்Offset angleஆஃப்செட் கோணம்Unable to trim these objects, too many wiresஇந்த பொருட்களை ஒழுங்கமைக்க முடியவில்லை, பல கம்பிகள்B-Splineபி-ச்ப்லைன்Create B-Splineபி-ச்ப்லைனை உருவாக்கவும்Change Styleஉடையை மாற்றவும்This object does not support possible coincident pointsஇந்த பொருள் சாத்தியமான தற்செயல் புள்ளிகளை ஆதரிக்காதுDelete Pointநீக்கு புள்ளிAdd Pointபுள்ளியைச் சேர்க்கவும்Open Wireதிறந்த கம்பிClose Wireமூடு கம்பிReverse Wireதலைகீழ் கம்பிActive object must have more than 2 points or nodesசெயலில் உள்ள பொருளில் 2 புள்ளிகள் அல்லது முனைகளுக்கு மேல் இருக்க வேண்டும்Open Splineச்ப்லைனைத் திறக்கவும்Close Splineச்ப்லைனை மூடுReverse Splineதலைகீழ் ச்ப்லைன்Move Arcமூவ் ஆர்க்Set First Angleமுதல் கோணத்தை அமைக்கவும்Set Last Angleகடைசி கோணத்தை அமைக்கவும்Set Radiusஆரம் அமைக்கவும்Invert Arcதலைகீழ் ஆர்க்Make Sharpசார்ப் செய்யுங்கள்Make Tangentதொடுகோடு செய்யுங்கள்Make Symmetricசமச்சீர் செய்யுங்கள்Reverse Curveதலைகீழ் வளைவுOpen Curveதிறந்த வளைவுClose Curveவளைவை மூடுSelection is not a knotதேர்வு என்பது முடிச்சு அல்லEndpoint of Bézier curve cannot be smoothedபெசியர் வளைவின் இறுதிப்புள்ளியை மென்மையாக்க முடியாதுActive object must have more than two points/nodesசெயலில் உள்ள பொருள் இரண்டுக்கும் மேற்பட்ட புள்ளிகள்/முனைகளைக் கொண்டிருக்க வேண்டும்Bézier Curveபெசியர் வளைவுCreate Bézier Curveபெசியர் வளைவை உருவாக்கவும்Cubic Bézier Curveகன பெசியர் வளைவுClick and drag to define next knotஅடுத்த முடிச்சை வரையறுக்க சொடுக்கு செய்து இழுக்கவும்%1 click and drag to define first point and knotமுதல் புள்ளி மற்றும் முடிச்சை வரையறுக்க % 1 சொடுக்கு செய்து இழுக்கவும்%1 click and drag to define next point and knotஅடுத்த புள்ளி மற்றும் முடிச்சை வரையறுக்க % 1 சொடுக்கு செய்து இழுக்கவும்Ellipseநீள்வட்டம்Create Ellipseநீள்வட்டத்தை உருவாக்கவும்Pick opposite pointஎதிர் புள்ளியைத் தேர்ந்தெடுக்கவும்%1 pick opposite point% 1 எதிர் புள்ளியைத் தேர்ந்தெடுக்கவும்Select faces from existing objectsஏற்கனவே உள்ள பொருட்களிலிருந்து முகங்களைத் தேர்ந்தெடுக்கவும்Select an object to scaleஅளவிட ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Pick base pointஅடிப்படை புள்ளியைத் தேர்ந்தெடுக்கவும்Pick reference distance from base pointஅடிப்படை புள்ளியிலிருந்து குறிப்பு தூரத்தைத் தேர்ந்தெடுக்கவும்Zero scale factor not allowedசுழிய அளவிலான காரணி அனுமதிக்கப்படவில்லைScaleScalePick new distance from base pointஅடிப்படை புள்ளியிலிருந்து புதிய தூரத்தைத் தேர்ந்தெடுக்கவும்Layerஅடுக்குCreate Dimensionபரிமாணத்தை உருவாக்கவும்Edge too short!விளிம்பு மிகவும் குறுகியது!Select an object to stretchநீட்டிக்க ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Pick first point of selection rectangleதேர்வு செவ்வகத்தின் முதல் புள்ளியைத் தேர்ந்தெடுக்கவும்Pick the opposite point of the selection rectangleதேர்வு செவ்வகத்தின் எதிர் புள்ளியைத் தேர்ந்தெடுக்கவும்Turning a rectangle into a wireஒரு செவ்வகத்தை கம்பியாக மாற்றுதல்Pick start point of displacementஇடப்பெயர்ச்சியின் தொடக்கப் புள்ளியைத் தேர்ந்தெடுக்கவும்Pick end point of displacementஇடப்பெயர்ச்சியின் இறுதிப் புள்ளியைத் தேர்ந்தெடுக்கவும்Stretchநீட்டவும்Rectangleசெவ்வகம்Create Planeவிமானத்தை உருவாக்கவும்Create Rectangleசெவ்வகத்தை உருவாக்கவும்Select an object to mirrorகண்ணாடிக்கு ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Pick start point of mirror lineகண்ணாடிக் கோட்டின் தொடக்கப் புள்ளியைத் தேர்ந்தெடுக்கவும்Mirrorகண்ணாடிPick end point of mirror lineகண்ணாடிக் கோட்டின் இறுதிப் புள்ளியைத் தேர்ந்தெடுக்கவும்Select an object to cloneநகலி செய்ய ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Cannot clone objects without a shape, abortingவடிவம் இல்லாத பொருட்களை நகலி செய்ய முடியாது, கருக்கலைப்புCannot clone objects without a shape, skipping themவடிவம் இல்லாமல் பொருட்களை நகலி செய்ய முடியாது, அவற்றைத் தவிர்க்கவும்Select an object to upgradeமேம்படுத்த ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Upgradeமேம்படுத்தல்Select an object to offsetஆஃப்செட் செய்ய ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Cannot offset this object typeஇந்த பொருள் வகையை ஈடுசெய்ய முடியாதுPick ShapeString location pointசேப்ச்ட்ரிங் இருப்பிடப் புள்ளியைத் தேர்ந்தெடுக்கவும்Create ShapeStringShapeString ஐ உருவாக்கவும்Healகுணமடையுங்கள்Downgradeதரமிறக்குObject:பொருள்:Polar Arrayதுருவ வரிசைNumber of elements must be at least 2உறுப்புகளின் எண்ணிக்கை குறைந்தது 2 ஆக இருக்க வேண்டும்The angle is above 360 degrees. It is set to this value to proceed.கோணம் 360 டிகிரிக்கு மேல் உள்ளது. தொடர இந்த மதிப்பில் அமைக்கப்பட்டுள்ளது.The angle is below -360 degrees. It is set to this value to proceed.கோணம் -360 டிகிரிக்கு கீழே உள்ளது. தொடர இந்த மதிப்பில் அமைக்கப்பட்டுள்ளது.Create Polar Arrayபோலார் அரேயை உருவாக்கவும்Fuse:உருகி:Create Link array:இணைப்பு வரிசையை உருவாக்கவும்:Number of elements:உறுப்புகளின் எண்ணிக்கை:Polar angle:துருவ கோணம்:Center of rotation:சுழற்சி மையம்:Orthogonal Arrayஆர்த்தோகனல் வரிசைNumber of elements must be at least 1உறுப்புகளின் எண்ணிக்கை குறைந்தது 1 ஆக இருக்க வேண்டும்In linear mode, at least 1 axis must be selectedநேரியல் பயன்முறையில், குறைந்தது 1 அச்சையாவது தேர்ந்தெடுக்க வேண்டும்Create Orthogonal Arrayஆர்த்தோகனல் வரிசையை உருவாக்கவும்Create link array:இணைப்பு வரிசையை உருவாக்கவும்:Number of X elements:ஃச் உறுப்புகளின் எண்ணிக்கை:Interval X:இடைவெளி X:Number of Y elements:ஒய் உறுப்புகளின் எண்ணிக்கை:Interval Y:இடைவெளி Y:Number of Z elements:சட் உறுப்புகளின் எண்ணிக்கை:Interval Z:இடைவெளி Z:Switch to Ortho Modeஆர்த்தோ பயன்முறைக்கு மாறவும்X-Axisஎக்ச்-அச்சுY-Axisஒய்-அச்சுZ-AxisZ-அச்சுSwitch to Linear Modeநேரியல் பயன்முறைக்கு மாறவும்Number of elementsஉறுப்புகளின் எண்ணிக்கைIntervalஇடைவேளைShapeStringசேப்ச்ட்ரிங்Defaultஇயல்புநிலைRadial distance is zero. Resulting array may not look correct.ரேடியல் தூரம் பூச்சியம். இதன் விளைவாக வரும் வரிசை சரியாகத் தோன்றாமல் இருக்கலாம்.Radial distance is negative. It is made positive to proceed.ஆர தூரம் எதிர்மறையானது. தொடர நேர்மறையாக உள்ளது.Circular Arrayவட்ட வரிசைAt least 1 element must be selectedகுறைந்தபட்சம் 1 உறுப்பு தேர்ந்தெடுக்கப்பட வேண்டும்Number of layers must be at least 2அடுக்குகளின் எண்ணிக்கை குறைந்தது 2 ஆக இருக்க வேண்டும்Selection is not suitable for arrayவரிசைக்கு தேர்வு பொருத்தமானது அல்லTangential distance cannot be 0தொடு தூரம் 0 ஆக இருக்கக்கூடாதுTangential distance is negative. It is made positive to proceed.தொடு தூரம் எதிர்மறையானது. தொடர நேர்மறையாக உள்ளது.Create Circular Arrayவட்ட வரிசையை உருவாக்கவும்Radial distance:ரேடியல் தூரம்:Tangential distance:தொடு தூரம்:Number of concentric circles:மைய வட்டங்களின் எண்ணிக்கை:Symmetry parameter:சமச்சீர் அளவுரு:Font file not foundஎழுத்துரு கோப்பு கிடைக்கவில்லைSpecified font file is not a fileகுறிப்பிடப்பட்ட எழுத்துரு கோப்பு ஒரு கோப்பு அல்லSpecified font type is not supportedகுறிப்பிடப்பட்ட எழுத்துரு வகை ஆதரிக்கப்படவில்லைShapeString: oblique angle must be in the -80 to +80 degree rangeசேப்ச்ட்ரிங்: சாய்ந்த கோணம் -80 முதல் +80 டிகிரி வரம்பில் இருக்க வேண்டும்ShapeString: string has no wiresசேப்ச்ட்ரிங்: சரத்தில் கம்பிகள் இல்லைShapeString: face creation failed for one characterசேப்ச்ட்ரிங்: ஒரு எழுத்துக்கு முகத்தை உருவாக்க முடியவில்லை, path object does not have 'Edges'., பாதை பொருளில் 'விளிம்புகள்' இல்லை.Start Offset too large for path length. Using 0 instead.பாதை நீளத்திற்கு ஆஃப்செட்டைத் தொடங்கவும் மிகப் பெரியது. அதற்கு பதிலாக 0 ஐப் பயன்படுத்துகிறது.End Offset too large for path length minus Start Offset. Using 0 instead.தொடக்க ஆஃப்செட்டைக் கழித்தல் பாதை நீளத்திற்கு முடிவு ஆஃப்செட் மிகவும் பெரியது. அதற்கு பதிலாக 0 ஐப் பயன்படுத்துகிறது.Length of tangent vector is 0. Copy not aligned.டேன்சென்ட் வெக்டரின் நீளம் 0. நகல் சீரமைக்கப்படவில்லை.Length of normal vector is 0. Using a default axis instead.சாதாரண வெக்டரின் நீளம் 0. அதற்குப் பதிலாக இயல்புநிலை அச்சைப் பயன்படுத்துதல்.Spacing unit of 0 is not allowed, using defaultஇயல்புநிலையைப் பயன்படுத்தி 0 இன் இடைவெளி அலகு அனுமதிக்கப்படாதுOperation would generate too many objects. Abortingசெயல்பாடு பல பொருட்களை உருவாக்கும். கருக்கலைப்புTangent and normal vectors are parallel. Normal replaced by a default axis.தொடு மற்றும் சாதாரண திசையன்கள் இணையாக உள்ளன. இயல்பானது இயல்புநிலை அச்சால் மாற்றப்பட்டது.Cannot calculate normal vector. Using the default normal instead.சாதாரண திசையன் கணக்கிட முடியாது. அதற்குப் பதிலாக இயல்புநிலை இயல்பானதைப் பயன்படுத்துதல்.AlignMode {} is not implementedAlignMode {} செயல்படுத்தப்படவில்லைNo shape foundவடிவம் இல்லைAll shapes must be planarஅனைத்து வடிவங்களும் சமதளமாக இருக்க வேண்டும்Points:புள்ளிகள்:Wrong input: must be a list or tuple of 3 points exactly.தவறான உள்ளீடு: சரியாக 3 புள்ளிகளின் பட்டியல் அல்லது டூப்பிள் இருக்க வேண்டும்.Wrong input: must be list or tuple of 3 points exactly.தவறான உள்ளீடு: சரியாக 3 புள்ளிகளின் பட்டியல் அல்லது டூப்பிள் இருக்க வேண்டும்.Placement:இடம்:Wrong input: incorrect type of placement.தவறான உள்ளீடு: தவறான இடம்.Wrong input: incorrect type of points.தவறான உள்ளீடு: தவறான வகை புள்ளிகள்.Cannot generate shape:வடிவத்தை உருவாக்க முடியாது:Wrong input: base_object not in document.தவறான உள்ளீடு: base_object ஆவணத்தில் இல்லை.Wrong input: path_object not in document.தவறான உள்ளீடு: path_object ஆவணத்தில் இல்லை.Wrong input: must be a number.தவறான உள்ளீடு: எண்ணாக இருக்க வேண்டும்.Wrong input: must be a vector.தவறான உள்ளீடு: வெக்டராக இருக்க வேண்டும்.Wrong input: must be a list or tuple of strings, or a single string.தவறான உள்ளீடு: சரங்களின் பட்டியல் அல்லது ட்யூப்பிள் அல்லது ஒற்றை சரமாக இருக்க வேண்டும்.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.தவறான உள்ளீடு: 'அசல்', 'ஃப்ரெனெட்' அல்லது 'டேன்சென்ட்' ஆக இருக்க வேண்டும்.Wrong input: must be a number or vector.தவறான உள்ளீடு: எண் அல்லது திசையன் இருக்க வேண்டும்.Input: single value expanded to vector.உள்ளீடு: ஒற்றை மதிப்பு வெக்டருக்கு விரிவாக்கப்பட்டது.Wrong input: must be an integer number.தவறான உள்ளீடு: முழு எண்ணாக இருக்க வேண்டும்.Input: number of elements must be at least 1. It is set to 1.உள்ளீடு: உறுப்புகளின் எண்ணிக்கை குறைந்தது 1 ஆக இருக்க வேண்டும். இது 1 ஆக அமைக்கப்பட்டுள்ளது.Wrong input: must be a placement, a vector, or a rotation.தவறான உள்ளீடு: இடம், திசையன் அல்லது சுழற்சியாக இருக்க வேண்டும்.Wrong input: target_object must not be a list.தவறான உள்ளீடு: target_object ஒரு பட்டியலாக இருக்கக்கூடாது.Wrong input: target_object not in document.தவறான உள்ளீடு: target_object ஆவணத்தில் இல்லை.Wrong input: subelements must be a list or tuple of strings, or a single string.தவறான உள்ளீடு: துணை உறுப்புகள் ஒரு பட்டியல் அல்லது சரங்களின் ட்யூப்பிள் அல்லது ஒற்றை சரமாக இருக்க வேண்டும்.Wrong input: subelement {} not in object.தவறான உள்ளீடு: துணை உறுப்பு {} பொருளில் இல்லை.Wrong input: label_type must be a string.தவறான உள்ளீடு: label_type ஒரு சரமாக இருக்க வேண்டும்.Wrong input: label_type must be one of the following:தவறான உள்ளீடு: label_type பின்வருவனவற்றில் ஒன்றாக இருக்க வேண்டும்:Wrong input: must be a list of strings or a single string.தவறான உள்ளீடு: சரங்களின் பட்டியல் அல்லது ஒற்றை சரமாக இருக்க வேண்டும்.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.தவறான உள்ளீடு: சரம், 'கிடை', 'செங்குத்து' அல்லது 'தனிப்பயன்'.Wrong input: points {} must be a list of at least two vectors.தவறான உள்ளீடு: புள்ளிகள் {} குறைந்தது இரண்டு திசையன்களின் பட்டியலாக இருக்க வேண்டும்.Direction is not 'Custom'; points won't be used.இயக்கம் 'விருப்பம்' அல்ல; புள்ளிகள் பயன்படுத்தப்படாது.Wrong input: must be a list of two elements. For example, [object, 'Edge1'].தவறான உள்ளீடு: இரண்டு கூறுகளின் பட்டியலாக இருக்க வேண்டும். உதாரணமாக, [object, 'Edge1'].Wrong input: point_object not in document.தவறான உள்ளீடு: point_object ஆவணத்தில் இல்லை.Wrong input: object has the wrong type.தவறான உள்ளீடு: பொருள் தவறான வகையைக் கொண்டுள்ளது.This function is deprecated. Do not use this function directly.இந்த செயல்பாடு நிராகரிக்கப்பட்டது. இந்த செயல்பாட்டை நேரடியாகப் பயன்படுத்த வேண்டாம்.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.'make_linear_dimension' அல்லது 'make_linear_dimension_obj' ஒன்றைப் பயன்படுத்தவும்.Wrong input: edge_object must not be a list or tuple.தவறான உள்ளீடு: எட்ச்_ஆப்செக்ட் ஒரு பட்டியலாகவோ அல்லது டூபிளாகவோ இருக்கக்கூடாது.Wrong input: edge_object not in document.தவறான உள்ளீடு: எட்ச்_ஆப்செக்ட் ஆவணத்தில் இல்லை.Wrong input: object doesn't have a 'Shape' to measure.தவறான உள்ளீடு: பொருளுக்கு அளவிடுவதற்கு 'வடிவம்' இல்லை.Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring.தவறான உள்ளீடு: பொருளில் அளவிடுவதற்குப் பயன்படுத்த 'வெர்டிசில்' குறைந்தபட்சம் 1 உறுப்பு இல்லை.Wrong input: must be an integer.தவறான உள்ளீடு: முழு எண்ணாக இருக்க வேண்டும்.i1: values below 1 are not allowed; will be set to 1.i1: 1க்குக் கீழே உள்ள மதிப்புகள் அனுமதிக்கப்படாது; 1 ஆக அமைக்கப்படும்.Wrong input: vertex not in object.தவறான உள்ளீடு: பொருளில் இல்லை.i2: values below 1 are not allowed; will be set to the last vertex in the object.i2: 1க்குக் கீழே உள்ள மதிப்புகள் அனுமதிக்கப்படாது; பொருளின் கடைசி உச்சியில் அமைக்கப்படும்.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.தவறான உள்ளீடு: பொருளில் அளவிடுவதற்குப் பயன்படுத்துவதற்கு குறைந்தபட்சம் ஒரு உறுப்பு 'எட்ச்சில்' இல்லை.index: values below 1 are not allowed; will be set to 1.index: 1க்குக் கீழே உள்ள மதிப்புகள் அனுமதிக்கப்படாது; 1 ஆக அமைக்கப்படும்.Wrong input: index doesn't correspond to an edge in the object.தவறான உள்ளீடு: பொருளின் விளிம்புடன் அட்டவணை பொருந்தவில்லை.Wrong input: index doesn't correspond to a circular edge.தவறான உள்ளீடு: குறியீடானது வட்ட விளிம்புடன் பொருந்தாது.Wrong input: must be a string, 'radius' or 'diameter'.தவறான உள்ளீடு: சரம், 'ஆரம்' அல்லது 'விட்டம்' இருக்க வேண்டும்.Wrong input: must be a list with two angles.தவறான உள்ளீடு: இரண்டு கோணங்களைக் கொண்ட பட்டியலாக இருக்க வேண்டும்.Wrong input: must be a number or quantity.தவறான உள்ளீடு: எண் அல்லது அளவு இருக்க வேண்டும்.Layersஅடுக்குகள்Wrong input: it must be a string.தவறான உள்ளீடு: இது ஒரு சரமாக இருக்க வேண்டும்.Wrong input: must be a tuple of three floats 0.0 to 1.0.தவறான உள்ளீடு: மூன்று மிதவைகள் 0.0 முதல் 1.0 வரை இருக்க வேண்டும்.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.தவறான உள்ளீடு: 'திட', 'கோடு', 'புள்ளி' அல்லது 'டாச்டாட்' ஆக இருக்க வேண்டும்.Wrong input: must be a number between 0 and 100.தவறான உள்ளீடு: 0 மற்றும் 100க்கு இடைப்பட்ட எண்ணாக இருக்க வேண்டும்.Editதிருத்துFlattenதட்டையாக்குUpgrade: Unknown force method:மேம்படுத்து: அறியப்படாத விசை முறை:Found 1 block: exploding it1 தொகுதி கிடைத்தது: அதை வெடிக்கிறதுFound 1 multi-solids compound: exploding it1 பல-திட கலவை கண்டுபிடிக்கப்பட்டது: அதை வெடிப்பதுFound 1 parametric object: breaking its dependencies1 அளவுரு பொருள் கண்டறியப்பட்டது: அதன் சார்புகளை உடைத்தல்Downgrade: Unknown force method:தரமிறக்கு: அறியப்படாத விசை முறை:Found 1 array: exploding it1 வரிசை கண்டுபிடிக்கப்பட்டது: அதை வெடிக்கிறதுFound 2 objects: subtracting them2 பொருள்கள் உள்ளன: அவற்றைக் கழித்தல்Found several faces: splitting themபல முகங்கள் காணப்பட்டன: அவற்றைப் பிரித்தல்Found several faces: subtracting them from the first oneபல முகங்கள் காணப்பட்டன: முதல் ஒன்றிலிருந்து அவற்றைக் கழித்தல்Unable to downgrade these objectsஇந்த பொருட்களை தரமிறக்க முடியவில்லைFound 1 face: extracting its wires1 முகம் கிடைத்தது: அதன் கம்பிகளைப் பிரித்தெடுத்தல்Found only wires: extracting their edgesகம்பிகள் மட்டுமே காணப்பட்டன: அவற்றின் விளிம்புகளைப் பிரித்தெடுத்தல்No object givenபொருள் கொடுக்கப்படவில்லைThe two points are coincidentஇரண்டு புள்ளிகளும் தற்செயலானவைmirroredபிரதிபலித்ததுFound 1 solidifiable object: solidifying it1 திடப்படுத்தக்கூடிய பொருள் கிடைத்தது: அதை திடப்படுத்துதல்Found 2 objects: fusing them2 பொருள்கள் உள்ளன: அவற்றை இணைத்தல்Found groups: closing open wires insideகண்டுபிடிக்கப்பட்ட குழுக்கள்: உள்ளே திறந்த கம்பிகளை மூடுதல்Found meshes: turning them into Part shapesமெச்கள் கண்டுபிடிக்கப்பட்டன: அவற்றை பகுதி வடிவங்களாக மாற்றுதல்Found object with several coplanar faces: refining themபல கோப்லனர் முகங்களைக் கொண்ட பொருள் கண்டுபிடிக்கப்பட்டது: அவற்றைச் செம்மைப்படுத்துதல்Found 1 closed sketch object: creating a face from it1 மூடிய ச்கெட்ச் பொருள் கிடைத்தது: அதிலிருந்து ஒரு முகத்தை உருவாக்குதல்Found closed wires: creating facesமூடிய கம்பிகள் கண்டுபிடிக்கப்பட்டன: முகங்களை உருவாக்குதல்Found several wires or edges: wiring themபல கம்பிகள் அல்லது விளிம்புகள் காணப்பட்டன: அவற்றை வயரிங் செய்தல்Found several non-treatable objects: creating compoundபல மருத்தீடு செய்ய முடியாத பொருள்கள் கண்டுபிடிக்கப்பட்டன: கலவையை உருவாக்குதல்Unable to upgrade these objectsஇந்த பொருட்களை மேம்படுத்த முடியவில்லைFound 1 open wire: closing it1 திறந்த கம்பி கிடைத்தது: அதை மூடுகிறதுFound 1 non-parametric object: replacing it with a Draft object1 அளவுரு அல்லாத பொருள் உள்ளது: அதை ஒரு வரைவு பொருளுடன் மாற்றுகிறதுFound points: creating compoundகண்டுபிடிக்கப்பட்ட புள்ளிகள்: கலவையை உருவாக்குதல்TextஉரைNo Targetஇலக்கு இல்லைInvalid label typeதவறான சிட்டை வகைTag not available for objectபொருளுக்கு குறிச்சொல் கிடைக்கவில்லைMaterial not available for objectபொருளுக்குப் பொருள் கிடைக்கவில்லைPosition not available for (sub)object(துணை) பொருளுக்கு பதவி கிடைக்கவில்லைLength not available for (sub)object(துணை) பொருளுக்கு நீளம் இல்லைArea not available for (sub)object(துணை) பொருளுக்குக் கிடைக்காத பகுதிVolume not available for (sub)object(துணை) பொருளுக்கான தொகுதி கிடைக்கவில்லைOpening Multiple Linksபல இணைப்புகளைத் திறக்கிறதுMultiple links foundபல இணைப்புகள் காணப்பட்டனThis may lead to the opening of various windowsஇது பல்வேறு சாளரங்களைத் திறக்க வழிவகுக்கும்File not found:கோப்பு கிடைக்கவில்லை:Opening hyperlinkஐப்பர்லிங்கைத் திறக்கிறதுSelect 3 vertices, one or more shapes or an object to define a working planeவேலை செய்யும் விமானத்தை வரையறுக்க 3 செங்குத்துகள், ஒன்று அல்லது அதற்கு மேற்பட்ட வடிவங்கள் அல்லது ஒரு பொருளைத் தேர்ந்தெடுக்கவும்Do you want to update the SVG pattern options
of existing objects in all opened documents?SVG பேட்டர்ன் விருப்பங்களைப் புதுப்பிக்க விரும்புகிறீர்களா
திறக்கப்பட்ட அனைத்து ஆவணங்களிலும் இருக்கும் பொருள்கள் என்ன?Sketch is too complex to edit: it is suggested to use the default Sketcher editorச்கெட்ச் திருத்த மிகவும் சிக்கலானது: இயல்புநிலை ச்கெட்சர் எடிட்டரைப் பயன்படுத்த பரிந்துரைக்கப்படுகிறதுCreate layerஅடுக்கை உருவாக்கவும்Remove From Layerஅடுக்கிலிருந்து அகற்றுAdd to New Layerபுதிய லேயரில் சேர்க்கவும்Remove from layerஅடுக்கிலிருந்து அகற்றுAdd to new layerபுதிய அடுக்கில் சேர்க்கவும்Add to layerஅடுக்கில் சேர்க்கவும்Layers changeஅடுக்குகள் மாறுகின்றனFlip Dimensionபுரட்டல் பரிமாணம்Toggle Gridகட்டத்தை நிலைமாற்றுChange Slopeசாய்வை மாற்றவும்Select exactly 2 objects, the base object and the path object, before calling this commandஇந்த கட்டளையை அழைப்பதற்கு முன், அடிப்படை பொருள் மற்றும் பாதை பொருள் ஆகிய 2 பொருள்களைத் தேர்ந்தெடுக்கவும்Create Path Arrayபாதை வரிசையை உருவாக்கவும்Create Path Twisted Arrayபாதை முறுக்கப்பட்ட வரிசையை உருவாக்கவும்Select exactly 2 objects, the base object and the point object, before calling this commandஇந்தக் கட்டளையை அழைப்பதற்கு முன், அடிப்படைப் பொருள் மற்றும் புள்ளிப் பொருள் ஆகிய 2 பொருள்களைத் தேர்ந்தெடுக்கவும்Create Point Arrayபுள்ளி வரிசையை உருவாக்கவும்Click anywhere on a line to split itஒரு வரியைப் பிரிக்க, அதன் மீது எங்கு வேண்டுமானாலும் சொடுக்கு செய்யவும்Split Lineபிளவு வரிNo active Draft toolbarசெயலில் வரைவு கருவிப்பட்டி இல்லைConstruction Modeகட்டுமான முறைToggle Display Modeகாட்சி பயன்முறையை நிலைமாற்று2 edges are needed2 விளிம்புகள் தேவைEdges are not connected or radius is too largeவிளிம்புகள் இணைக்கப்படவில்லை அல்லது ஆரம் அதிகமாக உள்ளதுUnable to build facebinderஃபேச்பைண்டரை உருவாக்க முடியவில்லைNo valid faces for facebinderஃபேச்பைண்டருக்கு சரியான முகங்கள் இல்லைUnable to build facebinder, resuming with sew disabledஃபேச்பைண்டரை உருவாக்க முடியவில்லை, தையல் முடக்கப்பட்ட நிலையில் மீண்டும் தொடங்குகிறதுConverting flat B-spline faces of facebinder to planar faces failedஃபேச்பைண்டரின் பிளாட் பி-ச்ப்லைன் முகங்களை பிளானர் முகங்களாக மாற்றுவது தோல்வியடைந்ததுActivate Layerலேயரை இயக்கவும்Reassign Properties of Layerஅடுக்கின் பண்புகளை மீண்டும் ஒதுக்கவும்Select Layer Contentsஅடுக்கு உள்ளடக்கத்தைத் தேர்ந்தெடுக்கவும்Add New Layerபுதிய அடுக்கைச் சேர்க்கவும்Reassign Properties of All Layersஅனைத்து அடுக்குகளின் பண்புகளை மீண்டும் ஒதுக்கவும்Merge Layer Duplicatesஅடுக்கு நகல்களை ஒன்றிணைக்கவும்The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either allow FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.DXF இறக்குமதி/ஏற்றுமதி நூலகங்களைக் கையாள FreeCADக்குத் தேவை
இந்த கணினியில் DXF வடிவம் காணப்படவில்லை.
இந்த நூலகங்களைப் பதிவிறக்க FreeCAD ஐ அனுமதிக்கவும்:
1 - சுமை வரைவு வொர்க்பெஞ்ச்
2 - பட்டியல் திருத்து → விருப்பத்தேர்வுகள் → இறக்குமதி-ஏற்றுமதி → DXF → பதிவிறக்கங்களை இயக்கு
அல்லது விளக்கப்பட்டுள்ளபடி, இந்த நூலகங்களை கைமுறையாகப் பதிவிறக்கவும்
https://github.com/yorikvanhavre/Draft-dxf-importer
இந்த நூலகங்களைப் பதிவிறக்க FreeCAD ஐ இயக்க, ஆம் என்று பதிலளிக்கவும்.PAT file not foundPAT கோப்பு கிடைக்கவில்லைSpecified PAT file is not a fileகுறிப்பிடப்பட்ட PAT கோப்பு ஒரு கோப்பு அல்லSpecified file type is not supportedகுறிப்பிட்ட கோப்பு வகை ஆதரிக்கப்படவில்லைPattern not found in PAT filePAT கோப்பில் பேட்டர்ன் இல்லைWorkbenchDraft Creationவரைவு உருவாக்கம்Draft Annotationவரைவு சிறுகுறிப்புDraft Modificationவரைவு மாற்றம்Draft Utilityவரைவு பயன்பாடுDraft Snapவரைவு ச்னாப்&Drafting&வரைவு&Annotation& note
&Modification&மாற்றம்&Utilities&பயன்பாடுகள்Arc Toolsஆர்க் கருவிகள்Bézier Toolsபெசியர் கருவிகள்Array Toolsவரிசை கருவிகள்DraftFilletஃபில்லட்Delete original objectsஅசல் பொருட்களை நீக்குCreate chamferஅறையை உருவாக்கவும்Save styleபாணியைச் சேமிக்கவும்Name of this new styleஇந்தப் புதிய பாணியின் பெயர்Warningஎச்சரிக்கைName exists. Overwrite?பெயர் உள்ளது. மேலெழுதவா?Error: json module not found. Unable to load styleபிழை: சாதொபொகு தொகுதி காணப்படவில்லை. நடையை ஏற்ற முடியவில்லைError: json module not found. Unable to save styleபிழை: சாதொபொகு தொகுதி காணப்படவில்லை. பாணியைச் சேமிக்க முடியவில்லைSlopeசாய்வுTrueஉண்மைFalseபொய்ScaleScaleX-factorஃச் காரணிY-factorஒய்-காரணிZ-factorZ-காரணிUniform scalingசீரான அளவிடுதல்CopyநகலெடுModify subelementsதுணை உறுப்புகளை மாற்றவும்Pick From/To Pointsபுள்ளிகளிலிருந்து/புள்ளிகளுக்குத் தேர்ந்தெடுக்கவும்Edit Scaleஅளவை திருத்தவும்Create a cloneஒரு நகலியை உருவாக்கவும்_BSpline.createGeometry: Closed with same first/last Point. Geometry not updated._BSpline.createGeometry: அதே முதல்/கடைசி புள்ளியுடன் மூடப்பட்டது. வடிவியல் புதுப்பிக்கப்படவில்லை.Writing camera positionகேமரா நிலையை எழுதுதல்Writing objects shown/hidden stateகாட்டப்படும்/மறைக்கப்பட்ட நிலையில் உள்ள பொருட்களை எழுதுதல்Onஅன்றுNameபெயர்Line Widthவரி அகலம்Draw Styleபாணியை வரையவும்Line Colorவரி நிறம்Face Colorமுக நிறம்Line Print Colorவரி அச்சு நிறம்Transparencyவெளிப்படைத்தன்மைNew Layerபுதிய அடுக்குCustomCustomLabelசிட்டைPositionபதவிLengthLengthAreaபகுதிVolumeதொகுதிTagகுறியிடவும்Materialபொருள்Label + Positionசிட்டை + நிலைLabel + Lengthசிட்டை + நீளம்Label + Areaசிட்டை + பகுதிLabel + Volumeசிட்டை + தொகுதிLabel + Materialசிட்டை + பொருள்Create Cloneநகலியை உருவாக்கவும்Choose a base object before using this commandஇந்த கட்டளையைப் பயன்படுத்துவதற்கு முன் ஒரு அடிப்படை பொருளைத் தேர்ந்தெடுக்கவும்Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction.ஆஃப்செட் திசை வரையறுக்கப்படவில்லை. ஒரு திசையைக் குறிக்க முதலில் பொருளின் இருபுறமும் சுட்டியை நகர்த்தவும்.Point object does not have a discrete point, it cannot be used for an arrayபுள்ளிப் பொருளுக்கு தனிப் புள்ளி இல்லை, அதை அணிவரிசைக்குப் பயன்படுத்த முடியாதுDownload of DXF libraries failed.
Please install the DXF Library addon manually
from menu Tools → Addon ManagerDXF நூலகங்களின் பதிவிறக்கம் தோல்வியடைந்தது.
DXF லைப்ரரி addon ஐ கைமுறையாக நிறுவவும்
பட்டியல் கருவிகள் → Addon Manager இலிருந்துimportOCAOCA: found no data to exportOCA: ஏற்றுமதி செய்வதற்கான தரவு எதுவும் இல்லைsuccessfully exportedவெற்றிகரமாக ஏற்றுமதி செய்யப்பட்டதுImportAirfoilDATDid not find enough coordinatesபோதுமான ஆயங்கள் கிடைக்கவில்லைImportSVGUnknown SVG export style, switching to Translatedஅறியப்படாத SVG ஏற்றுமதி நடை, மொழிபெயர்க்கப்பட்டதுThe export list contains no object with a valid bounding boxஏற்றுமதி பட்டியலில் செல்லுபடியாகும் எல்லைப் பெட்டியுடன் எந்த பொருளும் இல்லைDraft_LabelLabelசிட்டைCreates a label, optionally attached to a selected object or subelementதேர்ந்தெடுக்கப்பட்ட பொருள் அல்லது துணை உறுப்புடன் விருப்பமாக இணைக்கப்பட்ட லேபிளை உருவாக்குகிறதுDraft_LineLineLineCreates a 2-point line2-புள்ளி வரியை உருவாக்குகிறதுDraft_WirePolylineபாலிலைன்Creates a polylineஒரு பாலிலைனை உருவாக்குகிறதுDraft_HatchHatchHatchCreates hatches on the faces of a selected objectதேர்ந்தெடுக்கப்பட்ட பொருளின் முகத்தில் குஞ்சுகளை உருவாக்குகிறதுDraft_JoinJoinசேருங்கள்Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end.தேர்ந்தெடுக்கப்பட்ட கோடுகள் அல்லது பாலிலைன்களை ஒரு பொருளில் இணைக்கிறது.
கோடுகள் தொடக்கத்திலோ அல்லது முடிவிலோ பொதுவான புள்ளியைப் பகிர வேண்டும்.Draft_TextTextஉரைCreates a multi-line annotationபல வரி சிறுகுறிப்பை உருவாக்குகிறதுDraft_MoveMoveMoveMoves the selected objects.
If the "Copy" option is active, it creates displaced copies.தேர்ந்தெடுக்கப்பட்ட பொருட்களை நகர்த்துகிறது.
"நகல்" விருப்பம் செயலில் இருந்தால், அது இடம்பெயர்ந்த நகல்களை உருவாக்குகிறது.Draft_ArcArcArcCreates a circular arc from a center point and a radiusஒரு மைய புள்ளி மற்றும் ஒரு ஆரம் இருந்து ஒரு வட்ட வில் உருவாக்குகிறதுDraft_EditEditதிருத்துEdits the active objectசெயலில் உள்ள பொருளைத் திருத்துகிறதுDraft_PointPointPointCreates a pointஒரு புள்ளியை உருவாக்குகிறதுDraft_RotateRotateRotateRotates the selected objects.
If the "Copy" option is active, it will create rotated copies.தேர்ந்தெடுக்கப்பட்ட பொருட்களை சுழற்றுகிறது.
"நகல்" விருப்பம் செயலில் இருந்தால், அது சுழற்றப்பட்ட நகல்களை உருவாக்கும்.Draft_FilletFilletFilletCreates a fillet between 2 selected edgesதேர்ந்தெடுக்கப்பட்ட 2 விளிம்புகளுக்கு இடையில் ஒரு ஃபில்லட்டை உருவாக்குகிறதுDraft_PolygonPolygonPolygonCreates a regular polygon (triangle, square, pentagon…)வழக்கமான பலகோணத்தை உருவாக்குகிறது (முக்கோணம், நாற்கை, பென்டகன்...)Draft_SplitSplitபிளவுSplits the selected line or polyline at a specified pointதேர்ந்தெடுக்கப்பட்ட கோடு அல்லது பாலிலைனை ஒரு குறிப்பிட்ட புள்ளியில் பிரிக்கிறதுDraft_TrimexTrimexTrimexTrims or extends the selected object, or extrudes single facesதேர்ந்தெடுக்கப்பட்ட பொருளை ட்ரிம்ச் அல்லது நீட்டித்தல் அல்லது ஒற்றை முகங்களை வெளியேற்றும்Draft_CircleCircleவட்டம்Creates a circle (full circular arc)ஒரு வட்டத்தை உருவாக்குகிறது (முழு வட்ட வில்)Draft_EllipseEllipseEllipseCreates an ellipseநீள்வட்டத்தை உருவாக்குகிறதுDraft_FacebinderFacebinderஃபேச்பைண்டர்Creates a facebinder from the selected facesதேர்ந்தெடுக்கப்பட்ட முகங்களிலிருந்து ஒரு ஃபேச்பைண்டரை உருவாக்குகிறதுDraft_OrthoArrayArrayவரிசைCreates copies of the selected object in an orthogonal patternதேர்ந்தெடுக்கப்பட்ட பொருளின் நகல்களை ஆர்த்தோகனல் வடிவத்தில் உருவாக்குகிறதுDraft_ScaleScaleScaleScales the selected objects from a base pointஒரு அடிப்படை புள்ளியில் இருந்து தேர்ந்தெடுக்கப்பட்ட பொருட்களை அளவிடுகிறதுDraft_LayerNew Layerபுதிய அடுக்குAdds a layer to the document.
Objects added to this layer can share the same visual properties.ஆவணத்தில் ஒரு அடுக்கு சேர்க்கிறது.
இந்த லேயரில் சேர்க்கப்பட்ட பொருள்கள் அதே காட்சி பண்புகளைப் பகிர்ந்து கொள்ளலாம்.Draft_DimensionDimensionபரிமாணம்Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edgesஒரு நேரான விளிம்பு, ஒரு வட்ட விளிம்பு அல்லது 2 தேர்ந்தெடுக்கப்பட்ட புள்ளிகள் அல்லது 2 நேரான விளிம்புகளுக்கு ஒரு கோண பரிமாணத்தை உருவாக்குகிறதுDraft_StretchStretchநீட்டவும்Stretches the selected objectsதேர்ந்தெடுக்கப்பட்ட பொருட்களை நீட்டுகிறதுDraft_RectangleRectangleRectangleCreates a 2-point rectangle2-புள்ளி செவ்வகத்தை உருவாக்குகிறதுDraft_MirrorMirrorகண்ணாடிMirrors the selected objects along a line defined by 2 pointsதேர்ந்தெடுக்கப்பட்ட பொருட்களை 2 புள்ளிகளால் வரையறுக்கப்பட்ட ஒரு கோட்டில் பிரதிபலிக்கிறதுDraft_CloneCloneநகலிCreates a clone of the selected objectsதேர்ந்தெடுக்கப்பட்ட பொருட்களின் நகலியை உருவாக்குகிறதுDraft_UpgradeUpgradeமேம்படுத்தல்Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.தேர்ந்தெடுக்கப்பட்ட பொருட்களை மிகவும் சிக்கலான வடிவங்களுக்கு மேம்படுத்துகிறது.
செயல்பாட்டின் முடிவு பொருள்களின் வகைகளைப் பொறுத்தது, இது ஒரு வரிசையில் பல முறை மேம்படுத்தப்படலாம்.
எடுத்துக்காட்டாக, இது தேர்ந்தெடுக்கப்பட்ட பொருட்களை ஒன்றாக இணைக்கலாம், எளிய விளிம்புகளை அளவுரு பாலிலைன்களாக மாற்றலாம்,
மூடிய விளிம்புகளை நிரப்பப்பட்ட முகங்கள் மற்றும் அளவுரு பலகோணங்களாக மாற்றவும், மேலும் முகங்களை ஒரு முகமாக இணைக்கவும்.Draft_OffsetOffsetஆஃப்செட்Offsets the selected object.
It can also create an offset copy of the original object.தேர்ந்தெடுக்கப்பட்ட பொருளை ஈடுசெய்கிறது.
இது அசல் பொருளின் ஆஃப்செட் நகலை உருவாக்கலாம்.Draft_HealHealகுணமடையுங்கள்Heals faulty Draft objects saved with an earlier version of FreeCAD.
If an object is selected it tries to heal only that object,
otherwise it tries to heal all objects in the active document.FreeCAD இன் முந்தைய பதிப்பில் சேமிக்கப்பட்ட தவறான வரைவு பொருள்களை குணப்படுத்துகிறது.
ஒரு பொருள் தேர்ந்தெடுக்கப்பட்டால் அது அந்த பொருளை மட்டும் குணப்படுத்த முயல்கிறது.
இல்லையெனில் செயலில் உள்ள ஆவணத்தில் உள்ள அனைத்து பொருட்களையும் குணப்படுத்த முயற்சிக்கிறது.Draft_DowngradeDowngradeதரமிறக்குDowngrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be downgraded several times in a row.
For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted.தேர்ந்தெடுக்கப்பட்ட பொருட்களை எளிமையான வடிவங்களில் தரமிறக்குகிறது.
செயல்பாட்டின் முடிவு பொருள்களின் வகைகளைப் பொறுத்தது, இது ஒரு வரிசையில் பல முறை தரமிறக்கப்படலாம்.
எடுத்துக்காட்டாக, ஒரு 3D திடமானது தனித்தனி முகங்கள், கம்பிகள் மற்றும் பின்னர் விளிம்புகளாக சிதைக்கப்படுகிறது. முகங்களையும் கழிக்க முடியும்.App::PropertyThe placement of the base point of the first lineமுதல் வரியின் அடிப்படை புள்ளியின் இடம்The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.இந்த பொருளால் காட்டப்படும் உரை.
இது சரங்களின் பட்டியல்; பட்டியலில் உள்ள ஒவ்வொரு உறுப்பும் அதன் சொந்த வரியில் காட்டப்படும்.Text stringஉரை சரம்Font file nameஎழுத்துரு கோப்பு பெயர்Height of textஉரையின் உயரம்Horizontal and vertical alignmentகிடைமட்ட மற்றும் செங்குத்து சீரமைப்புHeight reference used for justificationநியாயப்படுத்த பயன்படுத்தப்படும் உயரம் குறிப்புKeep left margin and leading white space when justification is leftநியாயப்படுத்தல் விடப்படும் போது இடது விளிம்பு மற்றும் முன்னணி வெள்ளை இடத்தை வைத்திருங்கள்Scale to ensure cap height is equal to sizeதொப்பியின் உயரம் அளவுக்கு சமமாக இருப்பதை உறுதி செய்வதற்கான அளவுகோல்Inter-character spacingஎழுத்துகளுக்கு இடையேயான இடைவெளிOblique (slant) angleசாய்ந்த (சாய்ந்த) கோணம்Fill letters with facesஎழுத்துக்களை முகங்களால் நிரப்பவும்Fuse faces if faces overlap, usually not required (can be very slow)முகங்கள் ஒன்றுடன் ஒன்று இருந்தால், பொதுவாக தேவைப்படாது (மிக மெதுவாக இருக்கலாம்)The base object used by this objectஇந்த பொருளால் பயன்படுத்தப்படும் அடிப்படை பொருள்The PAT file used by this objectஇந்த ஆப்செக்ட் பயன்படுத்தும் PAT கோப்புThe pattern name used by this objectஇந்தப் பொருளால் பயன்படுத்தப்படும் பேட்டர்ன் பெயர்The pattern scale used by this objectஇந்த பொருளால் பயன்படுத்தப்படும் மாதிரி அளவுThe pattern rotation used by this objectஇந்த பொருளால் பயன்படுத்தப்படும் முறை சுழற்சிIf set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)False என அமைக்கப்பட்டால், மொழிபெயர்ப்பின்றி, முகங்களில் அட்ச் பயன்படுத்தப்படும் (இது XY அல்லாத முகங்களுக்கு தவறான முடிவுகளை அளிக்கலாம்)The objects included in this cloneஇந்த குளோனில் உள்ள பொருள்கள்The scale factor of this cloneஇந்த குளோனின் அளவு காரணிIf Clones includes several objects,
set True for fusion or False for compoundகுளோன்கள் பல பொருட்களை உள்ளடக்கியிருந்தால்,
இணைவுக்கு உண்மை அல்லது கலவைக்கு தவறு என அமைக்கவும்Always create a compoundஎப்போதும் ஒரு கலவையை உருவாக்கவும்Start angle of the arcவளைவின் தொடக்க கோணம்End angle of the arc (for a full circle,
give it same value as First Angle)பரிதியின் இறுதிக் கோணம் (முழு வட்டத்திற்கு,
முதல் கோணத்தின் அதே மதிப்பைக் கொடுங்கள்)Radius of the circleவட்டத்தின் ஆரம்Create a faceஒரு முகத்தை உருவாக்கவும்The area of this objectஇந்த பொருளின் பரப்பளவுThe objects that are part of this layerஇந்த அடுக்கின் ஒரு பகுதியாக இருக்கும் பொருள்கள்Number of facesமுகங்களின் எண்ணிக்கைRadius of the control circleகட்டுப்பாட்டு வட்டத்தின் ஆரம்How the polygon must be drawn from the control circleகட்டுப்பாட்டு வட்டத்திலிருந்து பலகோணம் எப்படி வரையப்பட வேண்டும்Radius to use to fillet the cornersமூலைகளை நிரப்புவதற்கு பயன்படுத்த வேண்டிய ஆரம்Size of the chamfer to give to the cornersமூலைகளுக்கு கொடுக்க அறையின் அளவுThe base object that will be duplicated.நகலெடுக்கப்படும் அடிப்படை பொருள்.The object along which the copies will be distributed. It must contain 'Edges'.பிரதிகள் விநியோகிக்கப்படும் பொருள். அதில் 'Edges' இருக்க வேண்டும்.Number of copies to create.உருவாக்க வேண்டிய நகல்களின் எண்ணிக்கை.Rotation factor of the twisted array.முறுக்கப்பட்ட வரிசையின் சுழற்சி காரணி.Show the individual array elements (only for Link arrays)தனிப்பட்ட வரிசை உறுப்புகளைக் காட்டு (இணைப்பு வரிசைகளுக்கு மட்டும்)The placement for each array elementஒவ்வொரு வரிசை உறுப்புக்கான இடம்The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.தலைவர் கோட்டின் முனையின் நிலை.
இந்த புள்ளியை ஒரு அம்பு அல்லது மற்றொரு சின்னத்துடன் அலங்கரிக்கலாம்.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.பொருள் மற்றும் விருப்பமாக துணை உறுப்பு, அதன் பண்புகள் காட்டப்படும்
'உரை' என, 'சிட்டை வகை' பொறுத்து.
'லேபிள் வகை' 'தனிப்பயன்' என அமைக்கப்பட்டால் 'இலக்கு' பயன்படுத்தப்படாது.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.தலைவர் வரியை வரையறுக்கும் புள்ளிகளின் பட்டியல்; பொதுவாக மூன்று புள்ளிகளின் பட்டியல்.
முதல் புள்ளி உரையின் நிலையாக இருக்க வேண்டும், அதாவது 'இடம்',
மற்றும் கடைசி புள்ளி வரியின் முனையாக இருக்க வேண்டும், அதாவது 'இலக்கு புள்ளி'.
தேர்ந்தெடுக்கப்பட்டதைப் பொறுத்து நடுத்தர புள்ளி தானாகவே கணக்கிடப்படுகிறது
'நேரான திசை' மற்றும் 'நேரான தூரம்' மதிப்பு மற்றும் அடையாளம்.
'நேரான திசை' என்பது 'தனிப்பயன்' என அமைக்கப்பட்டால், 'புள்ளிகள்' பண்பு
தன்னிச்சையான புள்ளிகளின் பட்டியலாக அமைக்கலாம்.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.லீடர் கோட்டின் நேரான பிரிவின் திசை.
'Custom' தேர்வு செய்யப்பட்டால், தலைவரின் புள்ளிகள் மூலம் குறிப்பிடலாம்
'புள்ளிகள்' பண்புக்கூறுக்கு தனிப்பயன் பட்டியலை ஒதுக்குகிறது.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.லீடர் கோட்டின் நேரான பிரிவின் நீளம்.
இது ஒரு சார்ந்த தூரம்; அது எதிர்மறையாக இருந்தால், கோடு வரையப்படும்
'உரை'க்கு இடது அல்லது கீழே, இல்லையெனில் வலது அல்லது அதற்கு மேல்,
'நேரான திசை' மதிப்பைப் பொறுத்து.The placement of the 'Text' element in 3D space3D இடத்தில் 'உரை' உறுப்பு இடம்The text to display when 'Label Type' is set to 'Custom''சிட்டை வகை' 'தனிப்பயன்' என அமைக்கப்படும் போது காட்ட வேண்டிய உரைThe text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.இந்த லேபிளால் காட்டப்படும் உரை.
இறுதி உரை 'சிட்டை வகை' சார்ந்து இருப்பதால், இந்த சொத்து படிக்க மட்டுமே உள்ளது,
மற்றும் 'இலக்கு' இல் வரையறுக்கப்பட்ட பொருள்.
'Label Type' 'Custom' என அமைக்கப்பட்டால் மட்டுமே 'Custom Text' காட்டப்படும்.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like BIM objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.இந்த லேபிளால் காட்டப்படும் செய்தி வகை.
'தனிப்பயன்' தேர்வு செய்யப்பட்டால், 'தனிப்பயன் உரை'யின் உள்ளடக்கங்கள் பயன்படுத்தப்படும்.
மற்ற வகைகளுக்கு, 'இலக்கு' இல் வரையறுக்கப்பட்ட பொருளிலிருந்து சரம் தானாகவே கணக்கிடப்படும்.
'டேக்' மற்றும் 'மெட்டீரியல்' ஆகியவை பிஐஎம் பொருள்கள் போன்ற இந்தப் பண்புகளைக் கொண்ட பொருட்களுக்கு மட்டுமே வேலை செய்யும்.
'நிலை', 'நீளம்' மற்றும் 'பகுதி' ஆகியவற்றிற்கு இந்த பண்புகள் 'இலக்கு' இல் உள்ள முக்கிய பொருளில் இருந்து பிரித்தெடுக்கப்படும்,
அல்லது துணை உறுப்பு 'VertexN', 'EdgeN' அல்லது 'FaceN' ஆகியவற்றிலிருந்து முறையே, அது குறிப்பிடப்பட்டிருந்தால்.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.சிறுகுறிப்பை தொடர்ந்து பாதிக்கும் பொதுவான அளவிடுதல் காரணி
ஏனெனில் இது உரை மற்றும் வரி அலங்காரங்கள் ஏதேனும் இருந்தால்,
அதே விகிதத்தில்.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.இந்தப் பொருளுக்குப் பயன்படுத்தப்படும் சிறுகுறிப்பு நடை.
சேமித்த பாணியைப் பயன்படுத்தும் போது, சில பார்வை பண்புகள் படிக்க-மட்டும் ஆகிவிடும்;
'விரிவுரை நடை எடிட்டர்' கருவி மூலம் நடையை மாற்றுவதன் மூலம் மட்டுமே அவற்றைத் திருத்த முடியும்.The base object that will be duplicatedநகலெடுக்கப்படும் அடிப்படை பொருள்List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.'பாத் ஆப்செக்டில்' இணைக்கப்பட்ட விளிம்புகளின் பட்டியல்.
இவை இருந்தால், இந்த துணை உறுப்புகளுடன் மட்டுமே பிரதிகள் உருவாக்கப்படும்.
'பாத் ஆப்செக்ட்' முழுவதும் நகல்களை உருவாக்க இந்த சொத்தை காலியாக விடவும்.Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode'ஒரிசினல்' அல்லது 'டேன்சென்ட்' சீரமைப்பு பயன்முறையைப் பயன்படுத்தும் போது, 'செங்குத்து வெக்டரை' உள்ளக Z-திசையாகப் பயன்படுத்தவும்Number of copies to createஉருவாக்க வேண்டிய நகல்களின் எண்ணிக்கைAdditional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.ஒவ்வொரு பிரதிக்கும் பயன்படுத்தப்படும் கூடுதல் மொழிபெயர்ப்பு.
வடிவ மையத்திற்கும் வடிவ குறிப்பு புள்ளிக்கும் உள்ள வேறுபாட்டை சரிசெய்ய இது பயனுள்ளதாக இருக்கும்.Alignment vector for 'Tangent' mode'டேன்சென்ட்' பயன்முறைக்கான சீரமைப்பு திசையன்Direction of the local Z axis when 'Force Vertical' is true'ஃபோர்ச் செங்குத்து' உண்மையாக இருக்கும்போது உள்ளக சட் அச்சின் திசைMethod to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.பாதையில் நகல்களை திசைதிருப்பும் முறை.
- அசல்: ஃச் என்பது வளைவு தொடுகோடு, ஒய் என்பது இயல்பானது, மற்றும் சட் என்பது குறுக்கு தயாரிப்பு.
- ஃப்ரீனெட்: பாதையில் உள்ள உள்ளக ஒருங்கிணைப்பு அமைப்பைப் பின்பற்றி பொருளை சீரமைக்கிறது.
- டேன்சென்ட்: 'ஒரிசினல்' போன்றது, ஆனால் உள்ளக ஃச் அச்சு 'டான்சென்ட் வெக்டருக்கு' முன்பே சீரமைக்கப்பட்டுள்ளது.
'ஒரிசினல்' அல்லது 'டேன்சென்ட்' மூலம் சிறந்த முடிவுகளைப் பெற, 'ஃபோர்ச் செங்குத்து' என்பதை உண்மையாக அமைக்க வேண்டும்.Walk the path backwards.பாதையில் பின்னோக்கி நடக்கவும்.How copies are spaced.
- Fixed count: available path length (minus start and end offsets) is evenly divided into n.
- Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path.
- Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies.பிரதிகள் எவ்வாறு இடைவெளியில் வைக்கப்படுகின்றன.
- நிலையான எண்ணிக்கை: கிடைக்கக்கூடிய பாதை நீளம் (தொடக்க மற்றும் முடிவு ஆஃப்செட் கழித்தல்) சமமாக n ஆக பிரிக்கப்பட்டுள்ளது.
- நிலையான இடைவெளி: "ச்டார்ட் ஆஃப்செட்" இல் தொடங்கி, பாதையில் ஒரு குறிப்பிட்ட தூரம் பயணித்த பிறகு புதிய நகல்களை வைக்கவும்.
- நிலையான எண்ணிக்கை மற்றும் இடைவெளி: அதே "நிலையான இடைவெளி", ஆனால் கொடுக்கப்பட்ட நகல்களின் எண்ணிக்கையில் நிறுத்தவும்.Base fixed distance between elements.உறுப்புகளுக்கு இடையே நிலையான தூரத்தை அமைக்கவும்.Use repeating spacing patterns instead of uniform spacing.ஒரே மாதிரியான இடைவெளிக்குப் பதிலாக மறுநிகழ்வு வரும் இடைவெளி வடிவங்களைப் பயன்படுத்தவும்.Spacing is multiplied by a corresponding number in this sequence.இடைவெளி இந்த வரிசையில் தொடர்புடைய எண்ணால் பெருக்கப்படுகிறது.Length from the start of the path to the first copy.பாதையின் தொடக்கத்திலிருந்து முதல் பிரதி வரையிலான நீளம்.Length from the end of the path to the last copy.பாதையின் முடிவில் இருந்து கடைசி நகல் வரையிலான நீளம்.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.'சீரமைப்பு பயன்முறை'யைப் பொறுத்து நகல்களை பாதையில் ஓரியண்ட் செய்யவும்.
இல்லையெனில், அசல் அடிப்படைப் பொருளின் அதே நோக்குநிலையைப் பிரதிகள் கொண்டிருக்கும்.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circles around the base object.உருவாக்க வேண்டிய வரிசை வகை.
- ஆர்த்தோ: உலகளாவிய X, Y, சட் அச்சுகளின் திசையில் பிரதிகளை வைக்கிறது.
- துருவம்: நகல்களை ஒரு வட்ட வளைவில், ஒரு குறிப்பிட்ட கோணம் வரை மற்றும் ஒரு நடுவண் மற்றும் அச்சினால் வரையறுக்கப்பட்ட குறிப்பிட்ட நோக்குநிலையுடன் வைக்கிறது.
- சுற்றறிக்கை: அடிப்படைப் பொருளைச் சுற்றி மைய வட்டங்களில் பிரதிகளை வைக்கிறது.Specifies if the copies should be fused together if they touch each other (slower)பிரதிகள் ஒன்றையொன்று தொட்டால் (மெதுவாக) ஒன்றாக இணைக்கப்பட வேண்டுமா என்பதைக் குறிப்பிடுகிறதுNumber of copies in X-directionஃச் திசையில் உள்ள பிரதிகளின் எண்ணிக்கைNumber of copies in Y-directionஒய் திசையில் உள்ள பிரதிகளின் எண்ணிக்கைNumber of copies in Z-directionZ- திசையில் உள்ள பிரதிகளின் எண்ணிக்கைDistance and orientation of intervals in X-directionஎக்ச்-திசையில் இடைவெளிகளின் தூரம் மற்றும் நோக்குநிலைDistance and orientation of intervals in Y-directionY-திசையில் இடைவெளிகளின் தூரம் மற்றும் நோக்குநிலைDistance and orientation of intervals in Z-directionZ-திசையில் இடைவெளிகளின் தூரம் மற்றும் நோக்குநிலைThe axis direction around which the elements in a polar or a circular array will be createdஒரு துருவ அல்லது வட்ட வரிசையில் உள்ள உறுப்புகள் உருவாக்கப்படும் அச்சு திசைCenter point for polar and circular arrays.
The 'Axis' passes through this point.துருவ மற்றும் வட்ட வரிசைகளுக்கான மையப் புள்ளி.
'அச்சு' இந்தப் புள்ளியைக் கடந்து செல்கிறது.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.'அச்சு' மற்றும் 'நடுவண்' ஆகியவற்றின் மதிப்பை மீறும் அச்சுப் பொருள், எடுத்துக்காட்டாக, தரவுக் கோடு.
அதன் இடம், நிலை மற்றும் சுழற்சி, துருவ மற்றும் வட்ட வரிசைகளை உருவாக்கும் போது பயன்படுத்தப்படும்.
'Axis' மற்றும் 'Center' ஐ கைமுறையாக அமைக்க இந்த சொத்தை காலியாக விடவும்.Number of copies in the polar directionதுருவ திசையில் உள்ள பிரதிகளின் எண்ணிக்கைDistance and orientation of intervals in 'Axis' direction'அச்சு' திசையில் இடைவெளிகளின் தூரம் மற்றும் நோக்குநிலைAngle to cover with copiesபிரதிகள் மூலம் மறைக்க கோணம்Distance between concentric circlesசெறிவு வட்டங்களுக்கு இடையிலான தூரம்Distance between copies in the same circleஒரே வட்டத்தில் உள்ள பிரதிகளுக்கு இடையே உள்ள தூரம்Number of concentric circle. The 'Base' object counts as one circle.செறிவு வட்டத்தின் எண்ணிக்கை. 'அடிப்படை' பொருள் ஒரு வட்டமாக கணக்கிடப்படுகிறது.A parameter that determines how many symmetry planes the circular array will haveவட்ட வரிசை எத்தனை சமச்சீர் விமானங்களைக் கொண்டிருக்கும் என்பதை தீர்மானிக்கும் அளவுருTotal number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.வரிசையில் உள்ள உறுப்புகளின் மொத்த எண்ணிக்கை.
வரிசையின் அளவுருக்களைப் பொறுத்து எண் சார்ந்திருப்பதால், இந்தப் பண்பு படிக்க மட்டுமே.Base object that will be duplicatedநகலெடுக்கப்படும் அடிப்படை பொருள்Object containing points used to distribute the copies.பிரதிகளை விநியோகிக்கப் பயன்படுத்தப்படும் புள்ளிகளைக் கொண்ட பொருள்.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.வரிசையில் உள்ள நகல்களின் எண்ணிக்கை.
'பாயிண்ட் ஆப்செக்ட்' இல் உள்ள புள்ளிகளைப் பொறுத்து எண் இருப்பதால், இந்தப் பண்பு படிக்க மட்டுமே.Additional placement, shift and rotation, that will be applied to each copyகூடுதல் இடம், மாற்றம் மற்றும் சுழற்சி, இது ஒவ்வொரு பிரதிக்கும் பயன்படுத்தப்படும்The base object this 2D view must representஇந்த 2டி காட்சி குறிப்பிட வேண்டிய அடிப்படை பொருள்The projection vector of this objectஇந்த பொருளின் திட்ட திசையன்The way the viewed object must be projectedபார்க்கும் பொருளைத் திட்டமிட வேண்டிய விதம்The indices of the faces to be projected in Individual Faces modeதனிப்பட்ட முகங்கள் பயன்முறையில் முன்வைக்கப்பட வேண்டிய முகங்களின் குறியீடுகள்Show hidden linesமறைக்கப்பட்ட வரிகளைக் காட்டுFuse wall and structure objects of same type and materialஒரே வகை மற்றும் பொருளின் சுவர் மற்றும் கட்டமைப்பு பொருள்களை உருகவும்Tessellate Ellipses and B-splines into line segmentsநீள்வட்டங்கள் மற்றும் பி-ச்பிளைன்களை வரிப் பிரிவுகளாக டெச்சலேட் செய்யவும்For Cutlines and Cutfaces modes, this leaves the faces at the cut locationகட்லைன்கள் மற்றும் கட்ஃபேச் முறைகளுக்கு, இது முகங்களை வெட்டப்பட்ட இடத்தில் விட்டுச் செல்கிறதுLength of line segments if tessellating Ellipses or B-splines into line segmentsநீள்வட்டங்கள் அல்லது B-ச்பிளைன்களை வரிப் பிரிவுகளாக டெசெல் செய்தால் வரிப் பகுதிகளின் நீளம்If this is True, this object will include only visible objectsஇது உண்மையாக இருந்தால், இந்த ஆப்செக்ட்டில் தெரியும் பொருள்கள் மட்டுமே இருக்கும்A list of exclusion points. Any edge touching any of those points will not be drawn.விலக்கு புள்ளிகளின் பட்டியல். அந்த புள்ளிகளில் எதையும் தொடும் எந்த விளிம்பும் வரையப்படாது.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.விலக்கு பொருள் பெயர்களின் பட்டியல். பட்டியலில் இருந்து ஒரு பெயருடன் பொருந்தும் எந்தப் பொருளும் வரையப்படாது.If this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyஇது உண்மையாக இருந்தால், திட வடிவியல் மட்டுமே கையாளப்படும். இது அடிப்படை பொருளின் ஒன்லி சாலிட்ச் சொத்தை மேலெழுதுகிறதுIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyஇது உண்மையாக இருந்தால், பொருந்தினால், பிரிவு விமானத்தின் எல்லைகளில் உள்ளடக்கங்கள் கிளிப் செய்யப்படும். இது அடிப்படை பொருளின் கிளிப் பண்புகளை மீறுகிறதுThis object will be recomputed only if this is True.இது உண்மையாக இருந்தால் மட்டுமே இந்த பொருள் மீண்டும் கணக்கிடப்படும்.The points of the Bezier curveபெசியர் வளைவின் புள்ளிகள்The degree of the Bezier functionபெசியர் செயல்பாட்டின் அளவுContinuityதொடர்ச்சிIf the Bezier curve should be closed or notBezier வளைவு மூடப்பட வேண்டுமா அல்லது இல்லை என்றால்Create a face if this curve is closedஇந்த வளைவு மூடப்பட்டால் முகத்தை உருவாக்கவும்The length of this objectஇந்த பொருளின் நீளம்The placement of this objectஇந்த பொருளின் இடம்X Locationஃச் இடம்Y Locationஎனது இருப்பிடம்Z Locationசட் இடம்Start angle of the elliptical arcநீள்வட்ட வளைவின் தொடக்கக் கோணம்End angle of the elliptical arc
(for a full circle, give it same value as First Angle)நீள்வட்ட வளைவின் இறுதிக் கோணம்
(முழு வட்டத்திற்கு, முதல் கோணத்தின் அதே மதிப்பைக் கொடுங்கள்)Minor radius of the ellipseநீள்வட்டத்தின் சிறிய ஆரம்Major radius of the ellipseநீள்வட்டத்தின் முக்கிய ஆரம்Area of this objectஇந்த பொருளின் பகுதிThe start point of this line.இந்த வரியின் தொடக்க புள்ளி.The end point of this line.இந்த வரியின் இறுதிப் புள்ளி.The length of this line.இந்த வரியின் நீளம்.Radius to use to fillet the corner.மூலையை நிரப்புவதற்கு பயன்படுத்த வேண்டிய ஆரம்.The normal direction of the text of the dimensionபரிமாணத்தின் உரையின் இயல்பான திசைThe object measured by this dimensionஇந்த பரிமாணத்தால் அளவிடப்படும் பொருள்The object, and specific subelements of it,
that this dimension is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.பொருள் மற்றும் அதன் குறிப்பிட்ட துணை கூறுகள்,
இந்த பரிமாணம் அளவிடுகிறது என்று.
பல்வேறு சாத்தியங்கள் உள்ளன:
- ஒரு பொருள், மற்றும் அதன் விளிம்புகளில் ஒன்று.
- ஒரு பொருள் மற்றும் அதன் இரண்டு முனைகள்.
- ஒரு வில் பொருள் மற்றும் அதன் விளிம்பு.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.பரிமாணக் கோடு அல்லது அதன் எக்ச்ட்ராபோலேசன் கடந்து செல்லும் ஒரு புள்ளி.
- நேரியல் பரிமாணங்களுக்கு, பரிமாணக் கோடு எவ்வளவு நெருக்கமாக இருக்கிறது என்பதைக் கட்டுப்படுத்துகிறது
அளவிடப்பட்ட பொருளுக்கு ஆகும்.
- ரேடியல் பரிமாணங்களுக்கு, இது பரிமாணக் கோட்டின் திசையைக் கட்டுப்படுத்துகிறது
இது அளவிடப்பட்ட ஆரம் அல்லது விட்டத்தைக் காட்டுகிறது.
- கோண பரிமாணங்களுக்கு, இது பரிமாண வளைவின் ஆரத்தைக் கட்டுப்படுத்துகிறது
இது அளவிடப்பட்ட கோணத்தைக் காட்டுகிறது.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.பரிமாணக் கோட்டின் தொடக்கப் புள்ளி.
ஆரம் பரிமாணமாக இருந்தால் அது பரிதியின் மையமாக இருக்கும்.
விட்டம் கொண்ட பரிமாணமாக இருந்தால், அது வளைவில் இருக்கும் ஒரு புள்ளியாக இருக்கும்.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.பரிமாணக் கோட்டின் முடிவுப் புள்ளி.
அது ஒரு ஆரம் அல்லது விட்டம் பரிமாணமாக இருந்தால்
அது வளைவில் இருக்கும் ஒரு புள்ளியாக இருக்கும்.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.பரிமாணக் கோட்டின் திசை.
இது '(0,0,0)' ஆக இருந்தால், திசை தானாகவே கணக்கிடப்படும்.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.அளவீட்டின் மதிப்பு.
மதிப்பு கணக்கிடப்பட்டதால் இந்த சொத்து படிக்க மட்டுமே
'தொடக்கம்' மற்றும் 'முடிவு' பண்புகளிலிருந்து.
'இணைக்கப்பட்ட வடிவியல்' ஒரு வில் அல்லது வட்டமாக இருந்தால், இந்த 'தூரம்'
ஆரம் அல்லது விட்டம், 'விட்டம்' பண்பைப் பொறுத்து.When measuring circular arcs, it determines whether to display
the radius or the diameter valueவட்ட வளைவுகளை அளவிடும் போது, அது காட்ட வேண்டுமா என்பதை தீர்மானிக்கிறது
ஆரம் அல்லது விட்டம் மதிப்புStarting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.பரிமாணக் கோட்டின் தொடக்கக் கோணம் (வட்ட வில்).
வளைவு எதிரெதிர் திசையில் வரையப்பட்டுள்ளது.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.பரிமாணக் கோட்டின் முடிவுக் கோணம் (வட்ட வில்).
வளைவு எதிரெதிர் திசையில் வரையப்பட்டுள்ளது.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.பரிமாணக் கோட்டின் மையப் புள்ளி, இது ஒரு வட்ட வில்.
இது பொதுவாக இரண்டு கோடு பிரிவுகள் அல்லது அவற்றின் நீட்டிப்புகளின் புள்ளியாகும்
வெட்டும், அவற்றுக்கிடையே அளவிடப்பட்ட 'கோணம்' விளைகிறது.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.அளவீட்டின் மதிப்பு.
மதிப்பு கணக்கிடப்பட்டதால் இந்த சொத்து படிக்க மட்டுமே
'முதல் கோணம்' மற்றும் 'கடைசி கோணம்' பண்புகள்.Length of the rectangleசெவ்வகத்தின் நீளம்Height of the rectangleசெவ்வகத்தின் உயரம்Horizontal subdivisions of this rectangleஇந்த செவ்வகத்தின் கிடைமட்ட உட்பிரிவுகள்Vertical subdivisions of this rectangleஇந்த செவ்வகத்தின் செங்குத்து உட்பிரிவுகள்Linked facesஇணைக்கப்பட்ட முகங்கள்Specifies if splitter lines must be removedபிரிப்பான் கோடுகள் அகற்றப்பட வேண்டுமா என்பதைக் குறிப்பிடுகிறதுAn optional extrusion value to be applied to all facesஅனைத்து முகங்களுக்கும் பயன்படுத்தப்படும் விருப்பமான எக்ச்ட்ரூசன் மதிப்புAn optional offset value to be applied to all facesஅனைத்து முகங்களுக்கும் பயன்படுத்தப்படும் விருப்பமான ஆஃப்செட் மதிப்புThis specifies if the shapes sewவடிவங்கள் தைக்கப்படுகிறதா என்பதை இது குறிப்பிடுகிறதுThe area of the faces of this Facebinderஇந்த ஃபேச்பைண்டரின் முகங்களின் பகுதிThe components of this blockஇந்த தொகுதியின் கூறுகள்The vertices of the wireகம்பியின் முனைகள்If the wire is closed or notகம்பி மூடியிருந்தால் அல்லது இல்லைThe base object is the wire, it's formed from 2 objectsஅடிப்படை பொருள் கம்பி, இது 2 பொருட்களிலிருந்து உருவாகிறதுThe tool object is the wire, it's formed from 2 objectsகருவி பொருள் கம்பி, இது 2 பொருட்களிலிருந்து உருவாகிறதுThe start point of this lineஇந்த வரியின் தொடக்க புள்ளிThe end point of this lineஇந்த வரியின் இறுதிப் புள்ளிThe length of this lineஇந்த வரியின் நீளம்Create a face if this object is closedஇந்த பொருள் மூடப்பட்டிருந்தால் முகத்தை உருவாக்கவும்The number of subdivisions of each edgeஒவ்வொரு விளிம்பின் உட்பிரிவுகளின் எண்ணிக்கைThe points of the B-splineபி-ச்ப்லைனின் புள்ளிகள்If the B-spline is closed or notபி-ச்ப்லைன் மூடப்பட்டிருந்தால் அல்லது இல்லைCreate a face if this B-spline is closedஇந்த பி-ச்ப்லைன் மூடப்பட்டிருந்தால் ஒரு முகத்தை உருவாக்கவும்Parameterization factorஅளவுருக் காரணிForce sync pattern placements even when array elements are expandedவரிசை உறுப்புகள் விரிவாக்கப்பட்டாலும் கூட, ஒத்திசைவு பேட்டர்ன் பிளேச்மென்ட்களை கட்டாயப்படுத்தவும்Show the individual array elementsதனிப்பட்ட வரிசை கூறுகளைக் காட்டுText colorஉரை நிறம்Line spacing (relative to font size)வரி இடைவெளி (எழுத்துரு அளவுடன் தொடர்புடையது)Vertical alignmentசெங்குத்து சீரமைப்புMaximum number of characters on each line of the text boxஉரை பெட்டியின் ஒவ்வொரு வரியிலும் அதிகபட்ச எழுத்துகள்Horizontal alignmentகிடைமட்ட சீரமைப்புThe type of frame around the text of this objectஇந்த பொருளின் உரையைச் சுற்றியுள்ள சட்டத்தின் வகைDisplay a leader line or notலீடர் லைனைக் காட்டு அல்லது இல்லையாLine widthLine widthLine colorLine colorDefines an SVG pattern.SVG வடிவத்தை வரையறுக்கிறது.Defines the size of the SVG pattern.SVG வடிவத்தின் அளவை வரையறுக்கிறது.If it is true, the objects contained within this layer will adopt the line color of the layerஇது உண்மையாக இருந்தால், இந்த அடுக்கில் உள்ள பொருள்கள் அடுக்கின் வரி நிறத்தை ஏற்றுக்கொள்ளும்If it is true, the objects contained within this layer will adopt the shape appearance of the layerஇது உண்மையாக இருந்தால், இந்த அடுக்கில் உள்ள பொருள்கள் அடுக்கின் வடிவத் தோற்றத்தைப் பெறும்If it is true, the print color will be used when objects in this layer are placed on a TechDraw pageஇது உண்மையாக இருந்தால், இந்த லேயரில் உள்ள பொருள்கள் TechDraw பக்கத்தில் வைக்கப்படும் போது அச்சு வண்ணம் பயன்படுத்தப்படும்The line color of the objects contained within this layerஇந்த அடுக்கில் உள்ள பொருட்களின் வரி நிறம்The shape color of the objects contained within this layerஇந்த அடுக்கில் உள்ள பொருட்களின் வடிவ நிறம்The shape appearance of the objects contained within this layerஇந்த அடுக்கில் உள்ள பொருட்களின் வடிவ தோற்றம்The line width of the objects contained within this layerஇந்த அடுக்கில் உள்ள பொருட்களின் வரி அகலம்The draw style of the objects contained within this layerஇந்த அடுக்கில் உள்ள பொருட்களின் வரைதல் பாணிThe transparency of the objects contained within this layerஇந்த அடுக்குக்குள் உள்ள பொருட்களின் வெளிப்படைத்தன்மைThe line color of the objects contained within this layer, when used on a TechDraw pageTechDraw பக்கத்தில் பயன்படுத்தப்படும் போது, இந்த லேயரில் உள்ள பொருட்களின் வரி நிறம்Font nameஎழுத்துரு பெயர்Font sizeFont sizeSpacing between text and dimension lineஉரை மற்றும் பரிமாணக் கோட்டிற்கு இடையே இடைவெளிRotate the dimension text 180 degreesபரிமாண உரையை 180 டிகிரி சுழற்றுText Position.
Leave '(0,0,0)' for automatic positionஉரை நிலை.
தானியங்கு நிலைக்கு '(0,0,0)' விடவும்Text override.
Write '$dim' so that it is replaced by the dimension length.உரை மேலெழுதுதல்.
'$dim' என்று எழுதவும், அது பரிமாண நீளத்தால் மாற்றப்படும்.The number of decimals to showகாட்ட வேண்டிய தசமங்களின் எண்ணிக்கைShow the unit suffixஅலகு பின்னொட்டைக் காட்டுA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationஅளவீட்டை வெளிப்படுத்தும் அலகு.
கணினி இயல்புநிலைக்கு காலியாக விடவும்.
US arch குறியீட்டை கட்டாயப்படுத்த 'arch' ஐப் பயன்படுத்தவும்Arrow sizeஅம்பு நடைகள்Arrow typeஅம்பு வகைRotate the dimension arrows 180 degreesபரிமாண அம்புகளை 180 டிகிரி சுழற்றுThe distance the dimension line is extended
past the extension linesபரிமாணக் கோடு நீட்டிக்கப்பட்ட தூரம்
நீட்டிப்பு வரிகளை கடந்ததுLength of the extension linesநீட்டிப்பு வரிகளின் நீளம்Length of the extension line
beyond the dimension lineநீட்டிப்பு வரியின் நீளம்
பரிமாணக் கோட்டிற்கு அப்பால்Shows the dimension line and arrowsபரிமாணக் கோடு மற்றும் அம்புகளைக் காட்டுகிறதுThe display length of this section planeஇந்த பகுதி விமானத்தின் காட்சி நீளம்The size of the arrows of this section planeஇந்த பிரிவு விமானத்தின் அம்புகளின் அளவுDefines a texture image (overrides hatch patterns)ஒரு அமைப்பு படத்தை வரையறுக்கிறது (அட்ச் வடிவங்களை மேலெழுதுகிறது)CommandTransformஉருமாற்று, உருமாற்றம்QObjectDraftDraftImport-Exportஇறக்குமதி-ஏற்றுமதிDraft_AnnotationStyleEditorAnnotation Stylesசிறுகுறிப்பு பாங்குகள்Opens an editor to manage or create annotation stylesசிறுகுறிப்பு பாணிகளை நிர்வகிக்க அல்லது உருவாக்க எடிட்டரைத் திறக்கும்Draft_Arc_3PointsArc From 3 PointsArc From 3 PointsCreates a circular arc from 3 points3 புள்ளிகளிலிருந்து ஒரு வட்ட வளைவை உருவாக்குகிறதுDraft_ArcToolsArc Toolsஆர்க் கருவிகள்Tools to create various types of circular arcsபல்வேறு வகையான வட்ட வளைவுகளை உருவாக்குவதற்கான கருவிகள்Draft_ArrayToolsArray Toolsவரிசை கருவிகள்Tools to create various types of arrays, including rectangular, polar, circular, path, and point arraysசெவ்வக, துருவ, வட்ட, பாதை மற்றும் புள்ளி வரிசைகள் உட்பட பல்வேறு வகையான வரிசைகளை உருவாக்குவதற்கான கருவிகள்Draft_BezCurveBézier Curveபெசியர் வளைவுCreates an n-degree Bézier curve. The more points, the higher the degree.n-டிகிரி பெசியர் வளைவை உருவாக்குகிறது. அதிக புள்ளிகள், அதிக பட்டம்.Draft_CubicBezCurveCubic Bézier Curveகன பெசியர் வளைவுCreates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments.
Control points and properties of each knot can be edited after creation.2வது டிகிரி (குவாட்ராடிக்) மற்றும் 3வது டிகிரி (கனசதுரம்) பிரிவுகளால் செய்யப்பட்ட பெசியர் வளைவை உருவாக்குகிறது. சொடுக்கு செய்து இழுப்பது பிரிவுகளை வரையறுக்க அனுமதிக்கிறது.
ஒவ்வொரு முடிச்சின் கட்டுப்பாட்டு புள்ளிகள் மற்றும் பண்புகளை உருவாக்கிய பிறகு திருத்தலாம்.Draft_BezierToolsBézier Toolsபெசியர் கருவிகள்Tools to create various types of Bézier curvesபல்வேறு வகையான Bézier வளைவுகளை உருவாக்குவதற்கான கருவிகள்Draft_CircularArrayCircular Arrayவட்ட வரிசைCreates copies of the selected object in a radial pattern with 1 or more circular layers1 அல்லது அதற்கு மேற்பட்ட வட்ட அடுக்குகளுடன் ரேடியல் வடிவத்தில் தேர்ந்தெடுக்கப்பட்ட பொருளின் நகல்களை உருவாக்குகிறதுDraft_FlipDimensionFlip Dimensionபுரட்டல் பரிமாணம்Flips the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.தேர்ந்தெடுக்கப்பட்ட பரிமாணங்களின் இயல்பான திசையை புரட்டுகிறது (நேரியல், ரேடியல், கோணம்).
பிற பொருள்கள் தேர்ந்தெடுக்கப்பட்டால் அவை புறக்கணிக்கப்படும்.Draft_Draft2SketchDraft to Sketchச்கெட்ச் வரைவுConverts bidirectionally between Draft objects and sketches.
Multiple selected Draft objects are converted into a single sketch.
However, a single sketch with disconnected traces is converted into several individual Draft objects.வரைவு பொருள்கள் மற்றும் ஓவியங்களுக்கு இடையே இருதரப்பு மாற்றுகிறது.
தேர்ந்தெடுக்கப்பட்ட பல வரைவு பொருள்கள் ஒரு ஓவியமாக மாற்றப்படும்.
இருப்பினும், துண்டிக்கப்பட்ட தடயங்களைக் கொண்ட ஒரு ஓவியம் பல தனிப்பட்ட வரைவுப் பொருட்களாக மாற்றப்படுகிறது.Draft_ToggleGridToggle GridToggle GridToggles the visibility of the Draft gridவரைவு கட்டத்தின் தெரிவுநிலையை மாற்றுகிறதுDraft_AddToGroupAdd to Groupகுழுவில் சேர்க்கவும்Adds selected objects to a group, or removes them from any groupதேர்ந்தெடுக்கப்பட்ட பொருட்களை ஒரு குழுவில் சேர்க்கிறது அல்லது எந்த குழுவிலிருந்தும் அவற்றை நீக்குகிறதுDraft_SelectGroupSelect Groupகுழுவைத் தேர்ந்தெடுக்கவும்Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected.தேர்ந்தெடுக்கப்பட்ட குழுக்களின் உள்ளடக்கங்களைத் தேர்ந்தெடுக்கிறது. தேர்ந்தெடுக்கப்பட்ட குழு அல்லாத பொருள்களுக்கு, அவை இருக்கும் குழுவின் உள்ளடக்கங்கள் தேர்ந்தெடுக்கப்படுகின்றன.Draft_AutoGroupAuto-Groupதானியங்கு குழுAdds new Draft and BIM objects to the selected layer or groupதேர்ந்தெடுக்கப்பட்ட அடுக்கு அல்லது குழுவில் புதிய வரைவு மற்றும் BIM பொருள்களைச் சேர்க்கிறதுDraft_AddConstructionAdd to Construction Groupகட்டுமானக் குழுவில் சேர்க்கவும்Adds the selected objects to the construction group,
and changes their appearance to the construction style.
The construction group is created if it does not exist.தேர்ந்தெடுக்கப்பட்ட பொருட்களை கட்டுமானக் குழுவில் சேர்க்கிறது,
மற்றும் அவர்களின் தோற்றத்தை கட்டுமான பாணிக்கு மாற்றுகிறது.
அது இல்லாவிட்டால் கட்டுமானக் குழு உருவாக்கப்பட்டது.Draft_AddNamedGroupNew Named Groupபுதிய பெயரிடப்பட்ட குழுAdds a group with a given nameகொடுக்கப்பட்ட பெயருடன் ஒரு குழுவைச் சேர்க்கிறதுDraft_HyperlinkOpen Linksஇணைப்புகளைத் திறOpens linked documentsஇணைக்கப்பட்ட ஆவணங்களைத் திறக்கும்Draft_AddToLayerAdd to Layerலேயரில் சேர்க்கவும்Adds selected objects to a layer, or removes them from any layerதேர்ந்தெடுக்கப்பட்ட பொருட்களை லேயரில் சேர்க்கிறது அல்லது எந்த லேயரில் இருந்தும் அவற்றை நீக்குகிறதுDraft_LayerManagerManage Layersஅடுக்குகளை நிர்வகிக்கவும்Allows to modify the layersஅடுக்குகளை மாற்ற அனுமதிக்கிறதுDraft_SlopeSet Slopeசாய்வை அமைக்கவும்Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn on the XY-plane.தேர்ந்தெடுக்கப்பட்ட வரியின் சாய்வை அதன் புள்ளிகளில் ஒன்றின் சட் மதிப்பின் மதிப்பை மாற்றுவதன் மூலம் அமைக்கிறது.
ஒரு பாலிலைன் தேர்ந்தெடுக்கப்பட்டால், அதன் ஒவ்வொரு பிரிவுக்கும் சாய்வு மாற்றத்தைப் பயன்படுத்தும்.
சாய்வு எப்போதும் சட் மதிப்பை மாற்றும், எனவே இந்த கட்டளை மட்டும் நன்றாக வேலை செய்கிறது
XY-விமானத்தில் வரையப்பட்ட நேரான வரைவு கோடுகள்.Draft_PathArrayPath Arrayபாதை வரிசைCreates copies of the selected object along a selected pathதேர்ந்தெடுக்கப்பட்ட பாதையில் தேர்ந்தெடுக்கப்பட்ட பொருளின் நகல்களை உருவாக்குகிறதுDraft_PathLinkArrayPath Link Arrayபாதை இணைப்பு வரிசைCreates linked copies of the selected object along a selected pathதேர்ந்தெடுக்கப்பட்ட பாதையில் தேர்ந்தெடுக்கப்பட்ட பொருளின் இணைக்கப்பட்ட நகல்களை உருவாக்குகிறதுDraft_PathTwistedArrayTwisted Path Arrayமுறுக்கப்பட்ட பாதை வரிசைCreates twisted copies of the selected object along a selected pathதேர்ந்தெடுக்கப்பட்ட பாதையில் தேர்ந்தெடுக்கப்பட்ட பொருளின் முறுக்கப்பட்ட நகல்களை உருவாக்குகிறதுDraft_PathTwistedLinkArrayTwisted Path Link Arrayமுறுக்கப்பட்ட பாதை இணைப்பு வரிசைCreates twisted linked copies of the selected object along a selected pathதேர்ந்தெடுக்கப்பட்ட பாதையில் தேர்ந்தெடுக்கப்பட்ட பொருளின் முறுக்கப்பட்ட இணைக்கப்பட்ட நகல்களை உருவாக்குகிறதுDraft_WorkingPlaneProxyWorking Plane Proxyவேலை செய்யும் விமான பதிலாள்Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objectsகேமரா நிலை மற்றும் பொருட்களின் தெரிவுநிலையை மீட்டெடுக்க அனுமதிக்கும் தற்போதைய வேலை செய்யும் விமானத்தில் இருந்து பதிலாள் பொருளை உருவாக்குகிறதுDraft_PointArrayPoint Arrayபுள்ளி வரிசைCreates copies of the selected object at the points of a point objectஒரு புள்ளி பொருளின் புள்ளிகளில் தேர்ந்தெடுக்கப்பட்ட பொருளின் நகல்களை உருவாக்குகிறதுDraft_PointLinkArrayPoint Link Arrayபுள்ளி இணைப்பு வரிசைCreates linked copies of the selected object at the points of a point objectஒரு புள்ளி பொருளின் புள்ளிகளில் தேர்ந்தெடுக்கப்பட்ட பொருளின் இணைக்கப்பட்ட நகல்களை உருவாக்குகிறதுDraft_PolarArrayPolar Arrayதுருவ வரிசைCreates copies of the selected object in a polar patternதேர்ந்தெடுக்கப்பட்ட பொருளின் நகல்களை துருவ வடிவத்தில் உருவாக்குகிறதுDraft_SelectPlaneWorking Planeவேலை செய்யும் வானூர்திDefines the working plane from 3 vertices, 1 or more shapes, or an object3 செங்குத்துகள், 1 அல்லது அதற்கு மேற்பட்ட வடிவங்கள் அல்லது ஒரு பொருளிலிருந்து வேலை செய்யும் விமானத்தை வரையறுக்கிறதுDraft_SetStyleSet Styleநடையை அமைக்கவும்Sets the default style and can apply the style to objectsஇயல்புநிலை பாணியை அமைக்கிறது மற்றும் பொருள்களுக்கு பாணியைப் பயன்படுத்தலாம்Draft_Shape2DViewShape 2D Viewவடிவம் 2D காட்சிCreates a 2D projection of the selected objects on the XY-plane.
The initial projection direction is the opposite of the current active view direction.XY- விமானத்தில் தேர்ந்தெடுக்கப்பட்ட பொருட்களின் 2D ப்ரொசெக்சனை உருவாக்குகிறது.
ஆரம்ப ப்ரொசெக்சன் திசையானது தற்போதைய செயலில் உள்ள பார்வை திசைக்கு எதிரானது.Draft_ShapeStringShape From Textஉரையிலிருந்து வடிவம்Creates a shape from a text string and a specified fontஉரைச் சரம் மற்றும் குறிப்பிட்ட எழுத்துருவிலிருந்து வடிவத்தை உருவாக்குகிறதுDraft_Snap_LockSnap Lockச்னாப் லாக்Enables or disables snapping globallyஉலகளவில் ச்னாப்பிங்கை இயக்குகிறது அல்லது முடக்குகிறதுDraft_Snap_MidpointSnap Midpointச்னாப் மிட்பாயிண்ட்Snaps to the midpoint of edgesவிளிம்புகளின் நடுப்புள்ளிக்கு ச்னாப்ச்Draft_Snap_PerpendicularSnap Perpendicularச்னாப் செங்குத்தாகSnaps to the perpendicular points on faces and edgesமுகங்கள் மற்றும் விளிம்புகளில் உள்ள செங்குத்து புள்ளிகளுக்கு ச்னாப்ச்Draft_Snap_GridSnap Gridச்னாப் கட்டம்Snaps to the intersections of grid linesகட்டக் கோடுகளின் குறுக்குவெட்டுகளுக்குச் செல்கிறதுDraft_Snap_IntersectionSnap Intersectionச்னாப் குறுக்குவெட்டுSnaps to the intersection of 2 edges, and the intersection of a face and an edge2 விளிம்புகளின் குறுக்குவெட்டு, மற்றும் ஒரு முகம் மற்றும் ஒரு விளிம்பின் வெட்டும்Draft_Snap_ParallelSnap Parallelச்னாப் பேரலல்Snaps to an imaginary line parallel to straight edgesநேரான விளிம்புகளுக்கு இணையான கற்பனைக் கோட்டிற்கு ச்னாப்ச்Draft_Snap_EndpointSnap Endpointச்னாப் எண்ட்பாயிண்ட்Snaps to the endpoints of edgesவிளிம்புகளின் இறுதிப்புள்ளிகளுக்கு ச்னாப்ச்Draft_Snap_AngleSnap Angleச்னாப் ஆங்கிள்Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°30° மற்றும் 45° மடங்குகளில் வட்ட விளிம்புகளில் உள்ள சிறப்பு கார்டினல் புள்ளிகளுக்கு ச்னாப்ச்Draft_Snap_CenterSnap Centerச்னாப் நடுவண்Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building partsமுகங்கள் மற்றும் வட்ட விளிம்புகளின் மையப் புள்ளியிலும், வேலை செய்யும் விமானப் ப்ராக்சிகள் மற்றும் கட்டுமானப் பகுதிகளின் இடப் புள்ளியிலும் ச்னாப்கள்Draft_Snap_ExtensionSnap Extensionச்னாப் நீட்டிப்புSnaps to an imaginary line that extends beyond the endpoints of straight edgesநேரான விளிம்புகளின் முனைப்புள்ளிகளுக்கு அப்பால் நீண்டிருக்கும் கற்பனைக் கோட்டிற்கு ச்னாப்ச்Draft_Snap_NearSnap Nearச்னாப் அருகில்Snaps to the nearest point on faces and edgesமுகங்கள் மற்றும் விளிம்புகளில் அருகிலுள்ள புள்ளிக்கு ச்னாப்ச்Draft_Snap_OrthoSnap Orthoச்னாப் ஆர்த்தோSnaps to imaginary lines that cross the previous point at multiples of 45°45° இன் மடங்குகளில் முந்தைய புள்ளியைக் கடக்கும் கற்பனைக் கோடுகளுக்கு ச்னாப்கள்Draft_Snap_SpecialSnap Specialச்னாப் ச்பெசல்Snaps to special points defined by the objectபொருளால் வரையறுக்கப்பட்ட சிறப்பு புள்ளிகளுக்கு ச்னாப்ச்Draft_Snap_DimensionsSnap Dimensionsச்னாப் பரிமாணங்கள்Shows temporary X and Y dimensionsதற்காலிக ஃச் மற்றும் ஒய் பரிமாணங்களைக் காட்டுகிறதுDraft_Snap_WorkingPlaneSnap Working Planeச்னாப் வேலை செய்யும் வானூர்திProjects snap points onto the current working planeதிட்டங்கள் தற்போதைய வேலை செய்யும் விமானத்தில் புள்ளிகளை எடுக்கின்றனDraft_ShowSnapBarShow Snap Toolbarச்னாப் கருவிப்பட்டியைக் காட்டுShows the snap toolbar if it is hiddenச்னாப் கருவிப்பட்டி மறைக்கப்பட்டிருந்தால் அதைக் காட்டுகிறதுDraft_BSplineB-Splineபி-ச்ப்லைன்Creates a multiple-point B-splineபல-புள்ளி B-ச்ப்லைனை உருவாக்குகிறதுDraft_ApplyStyleApply Current Styleதற்போதைய பாணியைப் பயன்படுத்துங்கள்Applies the current style to the selected objects and groupsதேர்ந்தெடுக்கப்பட்ட பொருள்கள் மற்றும் குழுக்களுக்கு தற்போதைய பாணியைப் பயன்படுத்துகிறதுDraft_SubelementHighlightHighlight Subelementsதுணை கூறுகளை முன்னிலைப்படுத்தவும்Highlights the subelements of the selected objects, to be able to move, rotate, and scale themதேர்ந்தெடுக்கப்பட்ட பொருட்களின் துணை உறுப்புகளை, நகர்த்தவும், சுழற்றவும், அளவிடவும் முடியும்Draft_ToggleConstructionModeToggle Construction Modeகட்டுமான பயன்முறையை மாற்றவும்Toggles the construction modeகட்டுமான பயன்முறையை மாற்றுகிறதுDraft_ToggleDisplayModeToggle Wireframeவயர்ஃப்ரேமை மாற்றவும்Switches the view style of the selected objects from Flat Lines to Wireframe and backதேர்ந்தெடுக்கப்பட்ட பொருட்களின் பார்வை பாணியை பிளாட் லைன்களில் இருந்து வயர்ஃப்ரேம் மற்றும் பின்புறம் மாற்றுகிறதுDraft_WireToBSplineConvert Wire/B-Splineவயர்/பி-ச்ப்லைனை மாற்றவும்Converts the selected polyline to a B-spline, or the selected B-spline to a polylineதேர்ந்தெடுக்கப்பட்ட பாலிலைனை பி-ச்ப்லைனாக அல்லது தேர்ந்தெடுக்கப்பட்ட பி-ச்ப்லைனை பாலிலைனாக மாற்றுகிறதுDxfImportDialogDXF ImportDXF இறக்குமதிImport Asஎன இறக்குமதி செய்யவும்Creates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench.முழு அளவுரு வரைவு பொருள்களை உருவாக்குகிறது. தொகுதி வரையறைகள் இவ்வாறு இறக்குமதி செய்யப்படுகின்றன
மீண்டும் பயன்படுத்தக்கூடிய பொருள்கள் (பகுதி கலவைகள்) மற்றும் நிகழ்வுகள் `ஆப்::இணைப்பு` பொருள்களாக மாறும்,
தொகுதி கட்டமைப்பை பராமரித்தல். வரைவுடன் முழு ஒருங்கிணைப்புக்கு சிறந்தது
பணிமனை.Editable Draft objectsதிருத்தக்கூடிய வரைவு பொருள்கள்Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing.அளவுரு பகுதி பொருட்களை உருவாக்குகிறது (எ.கா., பகுதி::கோடு, பகுதி::வட்டம்). தடு
வரையறைகள் மீண்டும் பயன்படுத்தக்கூடிய பொருள்கள் (பகுதி கலவைகள்) மற்றும் நிகழ்வுகளாக இறக்குமதி செய்யப்படுகின்றன
`ஆப்::லிங்க்` ஆப்செக்ட்களாகி, பிளாக் கட்டமைப்பைப் பராமரிக்கிறது. சிறந்தது
ச்கிரிப்ட் அடிப்படையிலான பிந்தைய செயலாக்கம்.Editable Part primitivesதிருத்தக்கூடிய பகுதி முதற்பொருள்கள்Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.ஒவ்வொரு DXF நிறுவனத்திற்கும் அளவுரு அல்லாத வடிவத்தை உருவாக்குகிறது. தொகுதி வரையறைகள்
மீண்டும் பயன்படுத்தக்கூடிய பொருள்களாக (பகுதி கலவைகள்) இறக்குமதி செய்யப்பட்டு, 'ஆப்::இணைப்பு'
பொருள்கள், தொகுதி கட்டமைப்பை பராமரித்தல். குறிப்பிடுவதற்கும் அளவிடுவதற்கும் நல்லது.Individual Part shapes (recommended)தனிப்பட்ட பகுதி வடிவங்கள் (பரிந்துரைக்கப்படுகிறது)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for viewing very large files with maximum performance.ஒரு அடுக்கில் உள்ள அனைத்து வடிவவியலையும் ஒற்றை, திருத்த முடியாத வடிவத்தில் ஒன்றிணைக்கிறது. தடு
கட்டமைப்புகள் பாதுகாக்கப்படவில்லை; அவற்றின் வடிவியல் அடுக்குகளின் ஒரு பகுதியாக மாறும்
வடிவம். அதிகபட்ச செயல்திறன் கொண்ட மிகப் பெரிய கோப்புகளைப் பார்ப்பதற்கு சிறந்தது.Fused Part shapes (fastest)இணைந்த பகுதி வடிவங்கள் (வேகமாக)File summaryகோப்பு சுருக்கம்WarningWarningDo not show this dialog againஇந்த உரையாடலை மீண்டும் காட்ட வேண்டாம்