DialogAnnotation Styles EditorEditor štýlu popisovStyle nameMeno štýluThe name of your style. Existing style names can be edited.The name of your style. Existing style names can be edited.Add new...Pridať nový...Renames the selected stylePremenovať vybraný štýlRenamePremenovaťDeletes the selected styleOdstrániť vybraný štýlDeleteOdstrániťImport styles from json fileImportovať štýly zo súboru jsonExport styles to json fileExportovať štýly do súboru jsonTextTextThe font to use for texts and dimensionsFont použitý pre texty a kótyFont nameNázov písmaFont size in the system unitsVeľkosť písma v jednotkách systémuFont sizeVeľkosť písmaLine spacing in system unitsRozstup čiar v jednotkách systémuLine spacingRozstup čiarUnitsJednotkyA multiplier factor that affects the size of texts and markersA multiplier factor that affects the size of texts and markersScale multiplierNásobiteľ mierkyIf it is checked it will show the unit next to the dimension valueIf it is checked it will show the unit next to the dimension valueShow unitZobraziť jednotkuSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitUnit overridePrepis jednotkyThe number of decimals to show for dimension valuesThe number of decimals to show for dimension valuesDecimalsDesatinné miestaLine and arrowsČiara a šípkyIf it is checked it will display the dimension lineIf it is checked it will display the dimension lineShow linesZobraziť čiaryThe width of the dimension linesŠírka kótovacích čiarLine widthHrúbka čiarypxpxThe color of dimension lines, arrows and textsFarba kótovacích čiar, šípiek a textovLine / text colorFarba čiary / textuThe type of arrows or markers to use at the end of dimension linesThe type of arrows or markers to use at the end of dimension linesArrow typeTyp šípkyDotBodkaCircleKružnicaArrowŠípkaTickTickTick-2Tick-2The size of the dimension arrows or markers in system unitsThe size of the dimension arrows or markers in system unitsArrow sizeVeľkosť šípkyThe distance that the dimension line is additionally extendedThe distance that the dimension line is additionally extendedDimension overshootPredĺženie kótyThe length of the extension linesThe length of the extension linesExtension linesPredĺžovacie čiaryThe distance that the extension lines are additionally extended beyond the dimension lineThe distance that the extension lines are additionally extended beyond the dimension lineExtension overshootDĺžka predĺženiaDraftCircularArrayTaskPanelCircular arrayCircular array(Placeholder for the icon)(Placeholder for the icon)Distance from one layer of objects to the next layer of objects.Vzdialenosť od jednej vrstvy objektov k ďalšej vrstve objektov.Radial distanceRadial distanceDistance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Vzdialenosť od jedného prvku v kruhu poľa k ďalšiemu prvku v tom istom kruhu. Nemôže byť nula.Tangential distanceTangential distanceNumber of circular layers or rings to create, including a copy of the original object.
It must be at least 2.Počet kruhových vrstiev alebo kruhov pre vytvorenie, vrátane kópie pôvodného objektu. Musí byť aspoň 2.Number of circular layersNumber of circular layersThe number of symmetry lines in the circular array.Počet osí symetrie v kruhovom poli.SymmetrySymetriaThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Súradnice bodu, cez ktorý prechádza os rotácie.
Meniť smer vlastnej osi je možné v editore vlastností.Center of rotationStred rotácieXXYYZZReset the coordinates of the center of rotation.Znovu nastaviť (resetovať) súradnice stredu rotácie.Reset pointReset pointIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.Ak je vybrané, výsledné objekty v poli budú zlúčené, ak sa navzájom dotýkajú.
Toto funguje iba ak možnosť "Spojiť pole" je vypnutá.FuseZlúčiťIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Ak je vybrané, výsledný objekt bude "Spojené pole" namiesto obyčajného poľa. Spojené pole je efektívnejšie pri vytváraní mnohonásobných kópií, avšak nemôže byť spolu zlúčené.Link arraySpojené poleDraftOrthoArrayTaskPanelOrthogonal arrayOrthogonal array(Placeholder for the icon)(Placeholder for the icon)Number of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.Počet prvkov poľa v danom smere, vrátane kópie objektu.
Číslo musí byť aspoň 1 v každom smere.Number of elementsNumber of elementsXXYYZZDistance between the elements in the X direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Vzdialenosť medzi prvkami v smere osi X.
Normálne, len hodnota X je potrebná, ďalšie dve hodnoty môžu určiť dodatočný posun v daných smeroch.
Záporné hodnoty vytvoria kópie v opačných smeroch.X intervalsX rozsahyReset the distances.Znovu nastaviť vzdialenosti.Reset XReset XDistance between the elements in the Y direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Vzdialenosť medzi prvkami v smere osi Y.
Normálne, len hodnota Y je potrebná, ďalšie dve hodnoty môžu určiť dodatočný posun v daných smeroch.
Záporné hodnoty vytvoria kópie v opačných smeroch.Y intervalsY rozsahyReset YReset YDistance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Vzdialenosť medzi prvkami v smere osi Z.
Normálne, len hodnota Z je potrebná, ďalšie dve hodnoty môžu určiť dodatočný posun v daných smeroch.
Záporné hodnoty vytvoria kópie v opačných smeroch.Z intervalsZ rozsahyReset ZReset ZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.Ak je vybrané, výsledné objekty v poli budú zlúčené, ak sa navzájom dotýkajú.
Toto funguje iba ak možnosť "Spojiť pole" je vypnutá.FuseZlúčiťIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Ak je vybrané, výsledný objekt bude "Spojené pole" namiesto obyčajného poľa. Spojené pole je efektívnejšie pri vytváraní mnohonásobných kópií, avšak nemôže byť spolu zlúčené.Link arraySpojené poleDraftPolarArrayTaskPanelPolar arrayPolar array(Placeholder for the icon)(Placeholder for the icon)Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Uhol polárnej distribúcie.
Záporný uhol vytvorí polárny vzor v opačnom smere.
Maximálna absolútna hodnota je 360 stupňov.Polar anglePolar angleNumber of elements in the array, including a copy of the original object.
It must be at least 2.Počet prvkov poľa, vrátane kópie pôvodného objektu.
Musí byť aspoň 2.Number of elementsNumber of elementsThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Súradnice bodu, cez ktorý prechádza os rotácie.
Meniť smer vlastnej osi je možné v editore vlastností.Center of rotationStred rotácieXXYYZZReset the coordinates of the center of rotation.Znovu nastaviť (resetovať) súradnice stredu rotácie.Reset pointReset pointIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.Ak je vybrané, výsledné objekty v poli budú zlúčené, ak sa navzájom dotýkajú.
Toto funguje iba ak možnosť "Spojiť pole" je vypnutá.FuseZlúčiťIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Ak je vybrané, výsledný objekt bude "Spojené pole" namiesto obyčajného poľa. Spojené pole je efektívnejšie pri vytváraní mnohonásobných kópií, avšak nemôže byť spolu zlúčené.Link arraySpojené poleDraftShapeStringGuiShapeStringShapeStringXXEnter coordinates or select point with mouse.Enter coordinates or select point with mouse.YYZZReset 3d point selectionReset 3d point selectionReset PointReset PointStringReťazecText to be made into ShapeStringText to be made into ShapeStringHeightVýškaHeight of the resultHeight of the resultFont fileFont fileFormWorking plane setupWorking plane setupSelect a face or working plane proxy or 3 vertices.
Or choose one of the options belowSelect a face or working plane proxy or 3 vertices.
Or choose one of the options belowSets the working plane to the XY plane (ground plane)Sets the working plane to the XY plane (ground plane)Top (XY)Top (XY)Sets the working plane to the XZ plane (front plane)Sets the working plane to the XZ plane (front plane)Front (XZ)Front (XZ)Sets the working plane to the YZ plane (side plane)Sets the working plane to the YZ plane (side plane)Side (YZ)Side (YZ)Sets the working plane facing the current viewSets the working plane facing the current viewAlign to viewAlign to viewThe working plane will align to the current
view each time a command is startedThe working plane will align to the current
view each time a command is startedAutomaticAutomaticOffsetOdsadenieAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveCenter plane on viewCenter plane on viewOr select a single vertex to move the current
working plane without changing its orientation.
Then, press the button belowOr select a single vertex to move the current
working plane without changing its orientation.
Then, press the button belowMoves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the viewMoves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the viewMove working planeMove working planeThe spacing between the smaller grid linesThe spacing between the smaller grid linesGrid spacingRozstup mriežkyThe number of squares between each main line of the gridThe number of squares between each main line of the gridMain line everyMain line everyGrid extensionGrid extension lines linesThe distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawingThe distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawingSnapping radiusSnapping radiusCenters the view on the current working planeCenters the view on the current working planeCenter viewCenter viewResets the working plane to its previous positionResets the working plane to its previous positionPreviousPreviousStyle settingsStyle settingsFills the values below with a stored style presetFills the values below with a stored style presetLoad presetLoad presetSave current style as a preset...Save current style as a preset...Lines and facesČiary a plochyLine colorFarba čiaryThe color of linesThe color of linesLine widthHrúbka čiary px pxDraw styleŠtýl kresleniaThe line styleThe line styleSolidTelesoDashedDashedDottedDottedDashDotDashDotDisplay modeDisplay modeThe display mode for facesThe display mode for facesFlat LinesFlat LinesWireframeDrôtový modelShadedShadedPointsBodyShape colorShape colorThe color of facesFarba stienTransparencyTransparencyThe transparency of facesPriehľadnosť stienAnnotationsPoznámkyText fontText fontThe font to use for texts and dimensionsFont použitý pre texty a kótyText sizeText sizeThe size of texts and dimension textsThe size of texts and dimension textsText spacingText spacingThe space between the text and the dimension lineThe space between the text and the dimension lineText colorFarba textuThe color of texts and dimension textsThe color of texts and dimension textsLine spacingRozstup čiarThe spacing between different lines of textThe spacing between different lines of textArrow styleArrow styleThe type of dimension arrowsThe type of dimension arrowsDotBodkaCircleKružnicaArrowŠípkaTickTickTick-2Tick-2Arrow sizeVeľkosť šípkyThe size of dimension arrowsThe size of dimension arrowsShow unitZobraziť jednotkuIf the unit suffix is shown on dimension texts or notČi je prípona jednotky zobrazená s textom kóty alebo nieUnit overridePrepis jednotkyThe unit to use for dimensions. Leave blank to use current FreeCAD unitThe unit to use for dimensions. Leave blank to use current FreeCAD unitApply above style to selected object(s)Apply above style to selected object(s)SelectedSelectedTexts/dimsTexts/dimsHatchHatchPAT file:PAT file:pattern files (*.pat)pattern files (*.pat)Pattern:Pattern:Scale:Scale:Rotation:Otočenie:Gui::Dialog::DlgSettingsDraftGeneral settingsZákladné nastaveniaGeneral Draft SettingsVšeobecné nastavenie návrhuDefault working planePredvolená pracovná rovinaNoneŽiadnyXY (Top)XY (hore)XZ (Front)XZ (Predok)YZ (Side)YZ (Bok)Internal precision levelÚroveň internej precíznostiThe number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.ToleranceToleranciaThis is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.This is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.Show groups in layers list drop-down buttonShow groups in layers list drop-down buttonDraft tools optionsMožnosti nástrojov návrhuWhen drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.Pri kreslení čiar nastaviť zameranie na dĺžku namiesto súradnice X.
To umožní určovať smer a zadávať dĺžku.Set focus on Length instead of X coordinateNastaviť zameranie na dĺžku namiesto súradnice XNormally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.Normally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.Select base objects after copyingPo kopírovaní vyberať základné objektyIf this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19Set the Support property when possibleSet the Support property when possibleIf this is checked, objects will appear as filled by default.
Otherwise, they will appear as wireframeAk je vybrané, objekty za zobrazia štandardne ako vyplnené.
Inak sa zobrazia ako drôtený rámFill objects with faces whenever possibleFill objects with faces whenever possibleIf this is checked, copy mode will be kept across command,
otherwise commands will always start in no-copy modeIf this is checked, copy mode will be kept across command,
otherwise commands will always start in no-copy modeGlobal copy modeVšeobecný mód kopírovaniaForce Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.Force Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.Use Part Primitives when availableUse Part Primitives when availablePrefix labels of Clones with:Prefix labels of Clones with:Construction GeometryConstruction GeometryConstruction group nameNázov Konštrukčnej skupinyThis is the default group name for construction geometryToto je predvolený názov konštrukčnej geometrieConstructionKonštrukciaConstruction geometry colorConstruction geometry colorThis is the default color for objects being drawn while in construction mode.Toto je predvolená farba pre kreslené objekty počas počas konštrukčného módu.Visual settingsVizuálne nastaveniaVisual SettingsVizuálne nastaveniaSnap symbols styleSnap symbols styleDraft classic styleDraft classic styleBitsnpieces styleBitsnpieces styleColorFarbaThe default color for snap symbolsThe default color for snap symbolsCheck this if you want to use the color/linewidth from the toolbar as defaultCheck this if you want to use the color/linewidth from the toolbar as defaultSave current color and linewidth across sessionsUložiť aktuálnu farbu a šírku čiary okolo relácieIf checked, a widget indicating the current working plane orientation appears during drawing operationsIf checked, a widget indicating the current working plane orientation appears during drawing operationsShow Working Plane trackerShow Working Plane trackerDefault template sheetPredvolená šablóna listuThe default template to use when creating a new drawing sheetPredvolená šablóna použitá pri vytvorení nového listu NávrhuAlternate SVG patterns locationAlternate SVG patterns locationHere you can specify a directory with custom SVG files containing <pattern> definitions to be added to the standard patternsHere you can specify a directory with custom SVG files containing <pattern> definitions to be added to the standard patternsSVG pattern resolutionRozlíšenie vzoru SVGThe resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing fasterThe resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing fasterSVG pattern default sizeSVG pattern default sizeThe default size for SVG patternsThe default size for SVG patternsCheck this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only)Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only)Preserve colors of faces during downgrade/upgradePreserve colors of faces during downgrade/upgradeCheck this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only)Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only)Preserve names of faces during downgrade/upgradePreserve names of faces during downgrade/upgradeDrawing view line definitionsDrawing view line definitionsDashed line definitionDashed line definitionAn SVG linestyle definitionAn SVG linestyle definitionDashdot line definitionDashdot line definitionDotted line definitionDotted line definitionTexts and dimensionsTexty a rozmeryText settingsText settingsFont familyFont familyThis is the default font name for all Draft texts and dimensions.
It can be a font name such as "Arial", a default style such as "sans", "serif"
or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style
such as "Arial:Bold"Toto je predvolený font textov a rozmerov Návrhu.
Môže ním byť názov fontu napr. "Arial" a predvoleným štýlom napr. "sans","serif"
alebo "mono", alebo skupina napr. "Arial,Helvetica,sans" alebo názov a štýl ako
napríklad "Arial:Bold"Internal fontInterný typ písmaFont sizeVeľkosť písmaDefault height for texts and dimensionsPredvolená výška pre texty a rozmerymmmmDimension settingsDimension settingsDisplay modeDisplay modetext above (2D)text above (2D) text inside (3D) text inside (3D)Number of decimalsNumber of decimalsExtension lines sizeExtension lines sizeThe default size of dimensions extension linesPredvolená veľkosť pomocných čiar rozmerovExtension line overshootExtension line overshootThe default length of extension line above dimension lineThe default length of extension line above dimension lineDimension line overshootDimension line overshootThe default distance the dimension line is extended past extension linesThe default distance the dimension line is extended past extension linesArrows styleArrows styleDotBodkaCircleKružnicaArrowŠípkaTickTickTick-2Tick-2Arrows sizeArrows sizeThe default size of arrowsPredvolená veľkosť šípkyText orientationText orientationThis is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard.Toto je operácia s vertikálnymi textami rozmerov. Štandardne je podľa ISO vľavo.Left (ISO standard)Vľavo (ISO štandard)RightVpravoText spacingText spacingThe space between the dimension line and the dimension textThe space between the dimension line and the dimension textShow the unit suffix in dimensionsShow the unit suffix in dimensionsOverride unitOverride unitBy leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit.By leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit.ShapeString settingsShapeString settingsDefault ShapeString font fileDefault ShapeString font fileSelect a font fileSelect a font fileSVGSVGImport styleImportovať štýlMethod chosen for importing SVG object color to FreeCADMethod chosen for importing SVG object color to FreeCADNone (fastest)Žiadne (najrýchlejšia)Use default color and linewidthPoužiť predvolenú farbu a šírkuČiaryOriginal color and linewidthPôvodné farby a šírkaČiaryIf checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter. If checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter. Disable units scalingDisable units scalingExport styleExport styleStyle of SVG file to write when exporting a sketchStyle of SVG file to write when exporting a sketchTranslated (for print & display)Translated (for print & display)Raw (for CAM)Raw (for CAM)All white lines will appear in black in the SVG for better readability against white backgroundsAll white lines will appear in black in the SVG for better readability against white backgroundsTranslate white line color to blackTranslate white line color to blackMax segment length for discretized arcsMax segment length for discretized arcsVersions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length. Versions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length. OCAOCACheck this if you want the areas (3D faces) to be imported too.Začiarknite, ak chcete importovať aj oblasti (3D).Import OCA areasImportovať OCA oblastíDXFDXFThis preferences dialog will be shown when importing/ exporting DXF filesThis preferences dialog will be shown when importing/ exporting DXF filesShow this dialog when importing and exportingShow this dialog when importing and exportingPython importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yetPython importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yetUse legacy python importerUse legacy python importerPython exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yetPython exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yetUse legacy python exporterUse legacy python exporterAutomatic update (legacy importer only)Automatic update (legacy importer only)Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.Allow FreeCAD to automatically download and update the DXF librariesAllow FreeCAD to automatically download and update the DXF librariesImport optionsImport optionsNote: Not all the options below are used by the new importer yetNote: Not all the options below are used by the new importer yetImportImportovaťIf unchecked, texts and mtexts won't be importedIf unchecked, texts and mtexts won't be importedtexts and dimensionstexts and dimensionsIf unchecked, points won't be importedIf unchecked, points won't be importedpointsbodyIf checked, paper space objects will be imported tooIf checked, paper space objects will be imported toolayoutslayoutsIf you want the non-named blocks (beginning with a *) to be imported tooIf you want the non-named blocks (beginning with a *) to be imported too*blocks*blokyCreateVytvoriťOnly standard Part objects will be created (fastest)Only standard Part objects will be created (fastest)simple Part shapessimple Part shapesParametric Draft objects will be created whenever possibleParametric Draft objects will be created whenever possibleDraft objectsDraft objectsSketches will be created whenever possibleSketches will be created whenever possibleSketchesSketchesScale factor to apply to imported filesScale factor to apply to imported filesScale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8Scale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied. Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied. Get original colors from the DXF fileGet original colors from the DXF fileFreeCAD will try to join coincident objects into wires.
Note that this can take a while!FreeCAD will try to join coincident objects into wires.
Note that this can take a while!Join geometrySpojiť geometriuObjects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable Group layers into blocksZoskupenie úrovní do blokovImported texts will get the standard Draft Text size,
instead of the size they have in the DXF documentImported texts will get the standard Draft Text size,
instead of the size they have in the DXF documentUse standard font size for textsUse standard font size for textsIf this is checked, DXF layers will be imported as Draft LayersIf this is checked, DXF layers will be imported as Draft LayersUse LayersUse LayersHatches will be converted into simple wiresHatches will be converted into simple wiresImport hatch boundaries as wiresImport hatch boundaries as wiresIf polylines have a width defined, they will be rendered
as closed wires with correct widthIf polylines have a width defined, they will be rendered
as closed wires with correct widthRender polylines with widthRender polylines with widthEllipse export is poorly supported. Use this to export them as polylines instead.Ellipse export is poorly supported. Use this to export them as polylines instead.Treat ellipses and splines as polylinesTreat ellipses and splines as polylinesMax Spline Segment:Max Spline Segment:Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.Export optionsExport optionsAll objects containing faces will be exported as 3D polyfacesAll objects containing faces will be exported as 3D polyfacesExport 3D objects as polyface meshesExportuje 3D objekty ako mriežky jednotlivých plôchDrawing Views will be exported as blocks.
This might fail for post DXF R12 templates.Drawing Views will be exported as blocks.
This might fail for post DXF R12 templates.Export Drawing Views as blocksExport Drawing Views as blocksExported objects will be projected to reflect the current view directionExported objects will be projected to reflect the current view directionProject exported objects along current view directionProject exported objects along current view directionGrid and snappingGrid and snappingSnappingSnappingIf this is checked, snapping is activated without the need to press the snap mod keyIf this is checked, snapping is activated without the need to press the snap mod keyAlways snap (disable snap mod)Always snap (disable snap mod)Constrain modVynucovací módThe Constraining modifier keyKlávesa vynucovacieho modifikátoraShiftShiftCtrlCtrlAltAltSnap modPrichytávací módThe snap modifier keyKláves prichytávacieho modifikátoraAlt modALT módThe Alt modifier keyThe Alt modifier keyIf checked, the Snap toolbar will be shown whenever you use snappingIf checked, the Snap toolbar will be shown whenever you use snappingShow Draft Snap toolbarShow Draft Snap toolbarHide Draft snap toolbar after useHide Draft snap toolbar after useGridMriežkaIf checked, a grid will appear when drawingAk je začiarknuté, pri kreslení použije mriežkuUse gridPoužiť mriežkuIf checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a commandIf checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a commandAlways show the gridVždy zobraziť mriežkuIf checked, an additional border is displayed around the grid, showing the main square size in the bottom left borderIf checked, an additional border is displayed around the grid, showing the main square size in the bottom left borderShow grid borderShow grid border<html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if "Show grid border" option is enabled.</p></body></html><html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if "Show grid border" option is enabled.</p></body></html>Show human figureShow human figureIf set, the grid will have its two main axes colored in red, green or blue when they match global axesAk je nastavené, tak mriežka bude mať jej dve hlavné osi vo farbe červenej, zelenej alebo modrej, a to vtedy, keď sa zhodujú s globálnymi osamiUse colored axesPoužiť farebné osiMain lines everyVždy Hlavné čiaryMainlines will be drawn thicker. Specify here how many squares between mainlines.Hlavné čiary budú hrubšie. Určite koľko štvorcov bude medzi hlavnými čiarami.Grid spacingRozstup mriežkyThe spacing between each grid lineRozstup medzi každou čiarou mriežkyGrid sizeGrid sizeThe number of horizontal or vertical lines of the gridThe number of horizontal or vertical lines of the grid lines linesGrid color and transparencyFarba a priehľadnosť mriežkyThe color of the gridFarba mriežkyThe overall transparency of the gridCelková priehľadnosť mriežkyDraft Edit preferencesDraft Edit preferencesEditUpraviťMaximum number of contemporary edited objectsMaximum number of contemporary edited objects<html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html><html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html>Draft edit pick radiusDraft edit pick radiusControls pick radius of edit nodesControls pick radius of edit nodesDWGDWGDWG conversionDWG conversionConversion method:Conversion method:This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.AutomaticAutomaticLibreDWGLibreDWGODA ConverterODA ConverterQCAD proQCAD proPath to file converterPath to file converterThe path to your DWG file converter executableThe path to your DWG file converter executable<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html><html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html>User interface settingsNastavenie používateľského rozhraniaIn-Command ShortcutsIn-Command ShortcutsRelativeRelatívnaRRContinuePokračovaťTTCloseZavrieťOOCopyKópiaPPSubelement ModeSubelement ModeDDFillFillLLExitExitAASelect EdgeVybrať hranuEEAdd HoldAdd HoldQQLengthDĺžkaHHWipeWipeWWSet WPSet WPUUCycle SnapCycle SnapGlobalVšeobecnéGGUndoUndoSnapSnapSSIncrease RadiusIncrease RadiusDecrease RadiusDecrease RadiusRestrict XRestrict XXXRestrict YRestrict YYYRestrict ZRestrict ZZZDraft StatusbarDraft StatusbarEnable snap statusbar widgetEnable snap statusbar widgetDraft snap widgetDraft snap widgetEnable draft statusbar annotation scale widgetEnable draft statusbar annotation scale widgetAnnotation scale widgetAnnotation scale widget