Dialog Annotation Styles Editor Editor de stiluri de adnotare Renames the selected style Redenumește stilul selectat Rename Redenumire Deletes the selected style Șterge stilul selectat New Nou Delete Ştergeţi Layers Manager Layers Manager Select All Selectaţi tot Toggle Visibility Toggle Visibility Isolate Izolați Cancel Renunţă OK OK Import styles from json file Importă stiluri dintr-un fișier JSON Export styles to json file Exportă stilurile într-un fișier JSON The font to use for texts and dimensions Fontul utilizat pentru texte și dimensiuni Font name Nume font The font size in system units Dimensiunea fontului în unitățile de sistem The width of the lines Lățimea liniilor px px The color of lines and arrows Culoarea liniilor și săgeților Line and arrow color Culoare linie și săgeată The distance the dimension line is additionally extended Distanța liniei de dimensiune este extinsă suplimentar Dimension line overshoot Dimensiunea liniei depăşiri Extension line length Lungimea liniei de extensie The distance the extension lines are additionally extended beyond the dimension line Distanța liniilor de prelungire este extinsă suplimentar dincolo de linia de dimensiune Font size Dimensiunea fontului The line spacing for multi-line texts and labels (relative to the font size) Spațierea liniei pentru texte și etichete multi-linie (în funcție de dimensiunea fontului) The color of texts, dimension texts and label texts Culoarea textelor, dimensiunea textelor și eticheta textelor Text color Culoare text Units Unități A multiplier factor that affects the size of texts and markers Un factor multiplicator care afectează dimensiunea textelor și marcajelor Style Name Style Name The name of the style. Existing style names can be edited. The name of the style. Existing style names can be edited. Add new… Add new… Scale multiplier Multiplicator scalare The type of the starting arrows or markers to use for dimensions and labels The type of the starting arrows or markers to use for dimensions and labels Start arrow type Start arrow type None Niciunul The size of the starting arrows or markers in system units The size of the starting arrows or markers in system units Start arrow size Start arrow size The type of the ending arrows or markers to use for dimensions and labels The type of the ending arrows or markers to use for dimensions and labels End arrow type End arrow type The size of the ending arrows or markers in system units The size of the ending arrows or markers in system units End arrow size End arrow size If it is checked it will show the unit next to the dimension value Dacă este bifat, va afișa unitatea lângă valoarea dimensiunii Show unit Arată unitatea Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit Specificați o unitate validă a lungimii ca mm, m, in, ft, pentru a forța afișarea valorii dimensiunii în această unitate Unit override Suprascrie unitatea The number of decimals to show for dimension values Numărul de zecimale de afișat pentru valorile de dimensiune Dimension Details Dimension Details The distance between the dimension text and the dimension line Distanța dintre textul dimensiunii și linia de dimensiune Text spacing Spațierea textului Annotations Annotations (Automatic Copy) Texts Texte Line spacing factor Factor de spațiere a liniilor Lines and Arrows Lines and Arrows Displays the dimension line Displays the dimension line Show dimension line Afișează linia de dimensiune Line width Latimea liniei Dot Punct Circle Cerc Arrow Săgeată Tick Marcaj Tick-2 Marcaj-2 Shows the unit next to the dimension value Shows the unit next to the dimension value Number of decimals Număr de zecimale Extension line overshoot Depăşirea liniei de prelungire The length of the extension lines Lungimea liniilor de extensie DraftCircularArrayTaskPanel Circular Array Circular Array Distance from one layer of objects to the next layer of objects Distance from one layer of objects to the next layer of objects Radial distance Distanță radială Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. Distanța dintre un element dintr-un inel al dispunerii și următorul element din același inel. Nu poate fi zero. Tangential distance Distanță tangențială The number of symmetry lines in the circular array The number of symmetry lines in the circular array Center of Rotation Center of Rotation Resets the coordinates of the center of rotation Resets the coordinates of the center of rotation Reset Point Reset Point Symmetry Simetrie Number of concentric circles to create, including a copy of the original object. It must be at least 2. Number of concentric circles to create, including a copy of the original object. It must be at least 2. Number of concentric circles Number of concentric circles The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Coordonatele punctului prin care trece axa de rotație. Schimbă direcția axei în sine în editorul proprietății. X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Dacă este bifată, obiectele rezultate în matrice vor fi contopite dacă se ating unul pe celălalt. Acest lucru funcționează numai dacă "Matrice înlănțuită" nu este selectat. Fuse Fuziune If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Dacă este bifată, obiectul rezultat va fi o "Matrice înlănțuită" în loc de o matrice normală. O matrice înlănțuită este mai eficientă în crearea mai multor copii, dar acestea nu pot fi contopite. Link array Matrice înlănțuită DraftOrthoArrayTaskPanel Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. Numărul de elemente din matrice în direcția specificată, incluzând o copie a obiectului original. Numărul trebuie să fie de cel puțin 1 în fiecare direcție. X X Y Y Z Z Reset X Resetează X Reset Y Resetează Y Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distanța dintre elementele în direcția Z. În mod normal, numai valoarea pe Z este necesară; celelalte două valori pot determina o deplasare suplimentară în direcțiile lor corespunzătoare. Valorile negative vor determina producerea copiilor în direcția negativă a axei. Orthogonal Array Orthogonal Array Toggles between orthogonal and linear mode Toggles between orthogonal and linear mode Switch to Linear Mode Switch to Linear Mode X axis X axis Y axis Y axis Z axis Z axis Number of Elements Number of Elements Currently selected axis Currently selected axis Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. X Intervals X Intervals Resets the distances Resets the distances Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Y Intervals Y Intervals Z Intervals Z Intervals Reset Z Resetează Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Dacă este bifată, obiectele rezultate în matrice vor fi contopite dacă se ating unul pe celălalt. Acest lucru funcționează numai dacă "Matrice înlănțuită" nu este selectat. Fuse Fuziune If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Dacă este bifată, obiectul rezultat va fi o "Matrice înlănțuită" în loc de o matrice normală. O matrice înlănțuită este mai eficientă în crearea mai multor copii, dar acestea nu pot fi contopite. Link array Matrice înlănțuită DraftPolarArrayTaskPanel Polar Array Polar Array Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. Unghiul de baleiere al distribuţiei polare. Un unghi negativ produce un model polar în direcţia opusă. Valoarea maximă absolută este de 360 de grade. Polar angle Unghi polar Number of elements in the array, including a copy of the original object. It must be at least 2. Numărul de elemente din matrice, incluzând o copie a obiectului original. Trebuie să fie cel puțin 2. Number of elements Numărul de elemente The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Coordonatele punctului prin care trece axa de rotație. Schimbă direcția axei în sine în editorul proprietății. Center of Rotation Center of Rotation Resets the coordinates of the center of rotation Resets the coordinates of the center of rotation Reset Point Reset Point X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Dacă este bifată, obiectele rezultate în matrice vor fi contopite dacă se ating unul pe celălalt. Acest lucru funcționează numai dacă "Matrice înlănțuită" nu este selectat. Fuse Fuziune If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Dacă este bifată, obiectul rezultat va fi o "Matrice înlănțuită" în loc de o matrice normală. O matrice înlănțuită este mai eficientă în crearea mai multor copii, dar acestea nu pot fi contopite. Link array Matrice înlănțuită DraftShapeStringGui ShapeString Formă din text X X Y Y Z Z Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Global Global Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Text to be made into ShapeString Textul trebuie pus în ShapeString Enter coordinates or pick a point with the mouse Enter coordinates or pick a point with the mouse Resets the picked point Resets the picked point Reset Point Reset Point Height Înălţime Height of the result Înălțimea rezultatului Text Text Font file Fișier de font Form Top (XY) Top (XY) Front (XZ) Frontal (XZ) Side (YZ) Lateral (YZ) Sets the working plane facing the current view Setează planul de lucru înspre vizualizarea curentă Working Plane Setup Working Plane Setup Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. Sets the working plane to the XY-plane (ground plane) Sets the working plane to the XY-plane (ground plane) Sets the working plane to the XZ-plane (front plane) Sets the working plane to the XZ-plane (front plane) Sets the working plane to the YZ-plane (side plane) Sets the working plane to the YZ-plane (side plane) Align to View Align to View The working plane will align to the current view each time a command is started Planul de lucru se va alinia conform vizualizării curente de fiecare dată când o comandă este pornită Automatic Automat Offset Compensare An optional offset to give to the working plane above its base position. Use this together with one of the buttons above Un decalaj opțional pentru planul de lucru deasupra poziției sale de bază. Utilizați-l împreună cu unul dintre butoanele de mai sus If this is selected, the working plane will be centered on the current view when pressing one of the buttons above Dacă aceasta este bifată, planul de lucru va fi centrat conform vizualizării curente când apăsați unul dintre butoanele de mai sus Center plane on view Centrează planul pe vedere Centers the working plane on the current view when pressing one of the buttons above Centers the working plane on the current view when pressing one of the buttons above Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. Move Working Plane Move Working Plane The color of the grid Culoarea grilajului Grid color Grid color The distance between grid lines The distance between grid lines The number of squares between major grid lines The number of squares between major grid lines Major lines every Major lines every squares squares Grid size Dimensiune grilajului The distance at which a point can be snapped to The distance at which a point can be snapped to Center View Center View Resets the working plane to its next position Resets the working plane to its next position Next Următoarea Grid spacing Spațierea grilajului The number of squares in the X- and Y-direction of the grid The number of squares in the X- and Y-direction of the grid Snapping radius Raza de fixare Centers the view on the current working plane Centrează vizualizarea conform planului de lucru curent Resets the working plane to its previous position Resetează planul de lucru la poziția sa anterioară Previous Anterior Load preset Încărcați presetarea Shape Forma Ambient shape color Ambient shape color Emissive shape color Emissive shape color Specular shape color Specular shape color Shape transparency Transparența formularelor Shape shininess Shape shininess Other Altceva Line color Culoarea liniei Line width Latimea liniei px px Draw style Stil de desenare Solid Solid Dashed Linie Intrerupta Dotted Punctată DashDot Linie punct Display mode Mod de afișare Flat Lines Linii plane Wireframe Wireframe Shaded Umbrit Fill the values below from a stored style preset Fill the values below from a stored style preset Point color Point color Point size Point size Points Puncte Shape color Culoare forma Annotations Annotations (Automatic Copy) Extension line length Lungimea liniei de extensie Extension line overshoot Depăşirea liniei de prelungire Text spacing Spațierea textului Text color Culoare text Dimensions Dimensiuni Dot Punct Annotation Notatie Texts Texte Line spacing factor Factor de spațiere a liniilor The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Start arrow type Start arrow type Circle Cerc Arrow Săgeată Tick Marcaj Tick-2 Marcaj-2 None Niciunul Start arrow size Start arrow size End arrow type End arrow type End arrow size End arrow size The unit override for dimensions. Leave blank to use the current FreeCAD unit. The unit override for dimensions. Leave blank to use the current FreeCAD unit. Dimension line overshoot Dimensiunea liniei depăşiri The distance the dimension line is extended past the extension lines Distanța cu care linia de dimensiune este prelungită dincolo de liniile de extensie The color for texts, dimension texts and label texts The color for texts, dimension texts and label texts Font name Nume font The font for texts, dimensions and labels The font for texts, dimensions and labels Font size Dimensiunea fontului The height for texts, dimension texts and label texts The height for texts, dimension texts and label texts The line spacing for multi-line texts and labels (relative to the font size) Spațierea liniei pentru texte și etichete multi-linie (în funcție de dimensiunea fontului) Scale multiplier Multiplicator scalare Line and arrow color Culoare linie și săgeată Style Settings Style Settings Saves the current style as a preset Saves the current style as a preset Shape Appearance Shape Appearance Lines and Arrows Lines and Arrows Adds a unit symbol to dimension texts Adds a unit symbol to dimension texts The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The length of extension lines above the dimension line The length of extension lines above the dimension line The space between the dimension line and the dimension text Spațiul dintre linia de dimensionare și textul dimensiunii Apply the above style to selected object(s) Apply the above style to selected object(s) Apply the above style to all annotations (texts, dimensions and labels) Apply the above style to all annotations (texts, dimensions and labels) Show unit Arată unitatea Unit override Suprascrie unitatea Selected Selectat Hatch Trapă PAT file PAT file Pattern Model Scale Scalare Rotation Rotation Align to face Align to face Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. Pattern files (*.pat *.PAT) Pattern files (*.pat *.PAT) Gui::Dialog::DlgSettingsDraft Default working plane Planul de lucru implicit General General The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. XY (Top) XY (sus) XZ (Front) XZ (față) YZ (Side) YZ (lateral) If checked, a widget indicating the current working plane orientation appears when picking points If checked, a widget indicating the current working plane orientation appears when picking points If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. Include groups in layer list Include groups in layer list If checked, base objects, instead of created copies, are selected after copying If checked, base objects, instead of created copies, are selected after copying If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. Create Part primitives if possible Create Part primitives if possible If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. Keep face colors during downgrade/upgrade Keep face colors during downgrade/upgrade If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. Keep face names during downgrade/upgrade Keep face names during downgrade/upgrade This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. Edit node pick radius Edit node pick radius The pick radius of edit nodes The pick radius of edit nodes Label prefix for clones Label prefix for clones The default prefix added to the label of new clones The default prefix added to the label of new clones Construction group label Construction group label The default label for the construction geometry group The default label for the construction geometry group The default color for Draft objects in construction mode The default color for Draft objects in construction mode Internal precision level Nivel de precizie internă Show working plane orientation Show working plane orientation Command Options Command Options If checked, instructions are displayed in the Report View when using Draft commands If checked, instructions are displayed in the Report View when using Draft commands Show prompts in the Report View Show prompts in the Report View If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. Set focus on Length instead of X coordinate Setează focalizarea pe lungime în loc de coordonata X Select base objects after copying Selectează obiectele de bază după copiere Maximum number of editable objects Maximum number of editable objects Construction Construcție Construction geometry color Culoare de geometrie construcții Draft classic style Stil clasic ciornă Bitsnpieces style Style Bitsnpieces (Carré) Visual Visual SVG Patterns SVG Patterns SVG pattern size SVG pattern size The default size for SVG patterns. A higher value results in a denser pattern. The default size for SVG patterns. A higher value results in a denser pattern. Additional SVG pattern location Additional SVG pattern location An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns Drawing View Line Definitions Drawing View Line Definitions Dashed line definition Definiția liniei punctate An SVG linestyle definition Une définition de style de ligne SVG Dashdot line definition Definiția liniei linie -punct Dotted line definition Definiție linie punctată Texts and dimensions Texte și dimensiuni Font size Dimensiunea fontului mm mm Lines and Arrows Lines and Arrows Start arrow type Start arrow type The default symbol displayed at the start of dimension lines The default symbol displayed at the start of dimension lines None Niciunul Start arrow size Start arrow size The default starting arrow size The default starting arrow size End arrow type End arrow type The default symbol displayed at the end of dimension lines The default symbol displayed at the end of dimension lines End arrow size End arrow size The default ending arrow size The default ending arrow size Number of decimals Număr de zecimale Dimension Details Dimension Details Extension line overshoot Depăşirea liniei de prelungire Dimension line overshoot Dimensiunea liniei depăşiri The default annotation scale multiplier. This is the inverse of the scale set in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. The default annotation scale multiplier. This is the inverse of the scale set in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. Texts Texte The default height for texts, dimension texts and label texts The default height for texts, dimension texts and label texts Line spacing factor Factor de spațiere a liniilor The default line spacing for multi-line texts and labels (relative to the font size) The default line spacing for multi-line texts and labels (relative to the font size) Scale multiplier Multiplicator scalare Texts and Dimensions Texts and Dimensions Annotations Annotations (Automatic Copy) Font name Nume font The default font for texts, dimensions and labels The default font for texts, dimensions and labels Text color Culoare text The default color for texts, dimension texts and label texts The default color for texts, dimension texts and label texts If checked, the dimension line is displayed by default If checked, the dimension line is displayed by default Show dimension line Afișează linia de dimensiune Line width Latimea liniei The default line width The default line width px px Dot Punct Circle Cerc Arrow Săgeată Tick Marcaj Tick-2 Marcaj-2 Line and arrow color Culoare linie și săgeată The default color for lines and arrows The default color for lines and arrows Units Unități If checked, a unit symbol is added to dimension texts by default If checked, a unit symbol is added to dimension texts by default Show unit Arată unitatea Unit override Suprascrie unitatea The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. The default number of decimal places for dimension texts The default number of decimal places for dimension texts The optional string inserted between the feet and inches values in dimensions The optional string inserted between the feet and inches values in dimensions The default distance the dimension line is extended past the extension lines The default distance the dimension line is extended past the extension lines Extension line length Lungimea liniei de extensie The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The default length of extension lines above the dimension line The default length of extension lines above the dimension line The default space between the dimension line and the dimension text The default space between the dimension line and the dimension text Text spacing Spațierea textului Feet separator Separator picioare SVG SVG Import style Importă un stil Use default style from Part/PartDesign Use default style from Part/PartDesign Use original SVG style Use original SVG style If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. Disable unit scaling Disable unit scaling Add wires for invalid faces Add wires for invalid faces Method for importing SVG object colors Method for importing SVG object colors If face generation results in a degenerated face, a raw wire from the original shape is added If face generation results in a degenerated face, a raw wire from the original shape is added Check to cut shapes according to the even/odd SVG fill rule Check to cut shapes according to the even/odd SVG fill rule Apply Cuts Apply Cuts Coordinate precision (crucial for detecting closed paths) Coordinate precision (crucial for detecting closed paths) The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. Export style Export stil Style of SVG file to write when exporting a sketch Stilul de scriere al fișierului SVG la exportul unei schițe Translated (for print & display) Tradus (pentru imprimare & afişare) Raw (for CAM) Brut (pentru CAM) All white lines will appear in black in the SVG for better readability against white backgrounds Toate liniile albe vor apărea în negru în SVG pentru o mai bună lizibilitate pe fundaluri albe Convert white line color to black Convert white line color to black Maximum segment length for discretized arcs Maximum segment length for discretized arcs Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. OCA OCA Import Options Import Options Imports the areas (3D faces) too Imports the areas (3D faces) too Import OCA areas Importă zone OCA DXF DXF Allow FreeCAD to automatically download and update the DXF libraries Permite FreeCAD să descarce automat și să actualizeze bibliotecile DXF Import Import All objects containing faces will be exported as 3D polyface meshes All objects containing faces will be exported as 3D polyface meshes Project exported objects along current view direction Project exported objects along current view direction Use colors from the DXF file Use colors from the DXF file Join geometry Reuneşte formele geometrice Use standard font size for texts Utilizaţi dimensiunea standard a fontului pentru texte Render polylines with width Render polylines with width Ellipse export is poorly supported. Use this to export them as polylines instead. Ellipse export is poorly supported. Use this to export them as polylines instead. Treat ellipses and splines as polylines Tratează elipsele și curbele ca polilinii If checked, this preferences dialog will be shown each time you import or export a DXF file. If checked, this preferences dialog will be shown each time you import or export a DXF file. Show the importer dialog when importing a file Show the importer dialog when importing a file Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. Use legacy importer Use legacy importer Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. Use legacy exporter Use legacy exporter Automatic Update (Legacy Only) Automatic Update (Legacy Only) If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. Import As Import As Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Editable Draft objects (highest fidelity, slowest) Editable Draft objects (highest fidelity, slowest) DxfImportMode DxfImportMode Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. Editable Part primitives (high fidelity, slower) Editable Part primitives (high fidelity, slower) Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Individual Part shapes (balanced, recommended) Individual Part shapes (balanced, recommended) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. Fused Part shapes (lowest fidelity, fastest) Fused Part shapes (lowest fidelity, fastest) Import Settings Import Settings Global scaling factor Global scaling factor Scale factor to apply to DXF files on import. The factor is the conversion between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 Scale factor to apply to DXF files on import. The factor is the conversion between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 If checked, text, mtext, and dimension entities will be imported as Draft objects If checked, text, mtext, and dimension entities will be imported as Draft objects If checked, point entities will be imported If checked, point entities will be imported Points Puncte If checked, entities from the paper space will also be imported. By default, only model space is imported If checked, entities from the paper space will also be imported. By default, only model space is imported Paper space objects Paper space objects If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions Anonymous blocks (*-blocks) Anonymous blocks (*-blocks) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) Hatch boundaries Hatch boundaries Appearance Aspect If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) Advanced processing Advanced processing If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting Create sketches Create sketches Export Options Export Options Maximum spline segment Maximum spline segment Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. Export 3D objects as polyface meshes Export 3D objects as polyface meshes TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. TechDraw Views va fi exportat ca blocuri. Acest lucru poate eşua pentru postarea de şabloane DXF R12. Export TechDraw Views as blocks Exportă TechDraw Views ca blocuri Exported objects will be projected to reflect the current view direction Obiectele exportate vor fi proiectate pentru a reflecta direcția vizualizării curente Shift Majusculă Always snap Always snap Grid and Snapping Grid and Snapping If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. Major lines every Major lines every The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. squares squares Snapping and Modifier Keys Snapping and Modifier Keys Snap modifier Snap modifier The Snap modifier key The Snap modifier key Ctrl Ctrl Alt Alt Constrain modifier Constrain modifier Alt modifier Alt modifier The Alt modifier key. The function of this key depends on the command. The Alt modifier key. The function of this key depends on the command. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. The distance between grid lines The distance between grid lines The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time Grid Grilă Always show the grid Arată grila mereu If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. Show the grid during commands Show the grid during commands If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner Show grid border Arată chenarul grilei Show human figure Arată figura umană If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system Use colored axes Folosește axe colorate Grid spacing Spațierea grilajului Grid size Dimensiune grilajului The number of squares in the X- and Y-direction of the grid The number of squares in the X- and Y-direction of the grid Grid transparency Grid transparency % % Grid color Grid color The constrain modifier key The constrain modifier key Snap symbol style Snap symbol style Mouse delay Mouse delay seconds secunde The style for snap symbols The style for snap symbols Snap symbol color Snap symbol color The color for snap symbols The color for snap symbols If checked, snapping is activated without the need to press the Snap modifier key If checked, snapping is activated without the need to press the Snap modifier key The color of the grid Culoarea grilajului The overall transparency of the grid Transparenţa globală a reţelei DWG DWG This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. Aceasta este metoda pe care FreeCAD o va folosi pentru a converti fişierele DWG în DXF. Dacă este ales "Automatic", FreeCAD va încerca să găsească unul dintre următorii convertori în aceeași ordine în care sunt afișați aici. Dacă FreeCAD nu poate găsi unul, ar putea fi necesar să alegeți un anumit convertor și să indicați calea acestuia de aici desubt. Alegeți utilitatea "dwg2dxf" dacă folosiți LibreDWG, "ODAFileConverter" dacă folosiți convertorul de fișiere ODA sau utilitatea "dwg2dwg" dacă folosiți versiunea pro a QCAD. Automatic Automat DWG Conversion DWG Conversion Conversion method Conversion method LibreDWG LibreDWG ODA Converter Convertor AOD QCAD pro QCAD pro Path to file converter Calea către convertorul de fișiere The path to your DWG file converter executable Calea către executabilul convertorului de fișiere DWG <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> <html><head/> <body><p><span style="font-weight:600;"> Remarque:</span> DXF options s'appliquent à des fichiers DWG.</p></body></html> Relative Relativ R R Continue Continua Close Închide O O Copy Copiere L L Interface Interface F F Select edge Selectaţi marginea Subelement mode Mod Subelement B B C C Exit Iesire A A Increase radius Increase radius Decrease radius Decrease radius E E Q Q Length Lungime Wipe Șterge W W U U Global Global In-Command Shortcuts In-Command Shortcuts G G Make face Fașa planului Undo Undo N N Cycle snap Cycle snap Add hold Add hold Set working plane Setați planul de lucru Snap Fixează S S Restrict X Limita X X X Restrict Y Limita Y Y Y Restrict Z Limita Z Z Z Recenter Recenter D D UI Options UI Options If checked, the Draft Snap toolbar will only be visible during commands If checked, the Draft Snap toolbar will only be visible during commands Only show the Draft Snap toolbar during commands Only show the Draft Snap toolbar during commands If checked, the Draft Snap Widget is displayed in the Draft Status Bar If checked, the Draft Snap Widget is displayed in the Draft Status Bar Show the Draft Snap Widget in the Draft Workbench Show the Draft Snap Widget in the Draft Workbench If checked, the Draft Scale Widget is displayed in the Draft Status Bar If checked, the Draft Scale Widget is displayed in the Draft Status Bar Show the Draft Scale Widget in the Draft Workbench Show the Draft Scale Widget in the Draft Workbench draft Relative Relativ Global Global Continue Continua If checked, the command will not finish until pressing the command button again If checked, the command will not finish until pressing the command button again If checked, the next dimension will be placed in a chain with the previously placed Dimension If checked, the next dimension will be placed in a chain with the previously placed Dimension Close Închide Set Working Plane Setare Plan de lucru Select Edge Select Edge Copy Copiere Wipe Șterge All shapes must be coplanar All shapes must be coplanar Selected shapes must define a plane Selected shapes must define a plane Top Partea de sus Front Din față Side Latura Auto Automat Current working plane: Auto Current working plane: Auto Current working plane: Current working plane: Selected shapes do not define a plane Selected shapes do not define a plane No previous working plane No previous working plane No next working plane No next working plane Axes: Axes: Position: Pozitie: None Niciunul active command: active command: Active Draft command Active Draft command X coordinate of the point X coordinate of the point X X Y Y Z Z Length Lungime Angle Unghi Radius Raza Creates the text object and finishes the command Creates the text object and finishes the command Changes the default style for new objects Changes the default style for new objects Toggles construction mode Toggles construction mode Label Type Label Type Radius of Circle Radius of Circle Coordinates relative to last point or to coordinate system origin if is the first point to set Coordinates relative to last point or to coordinate system origin if is the first point to set Y coordinate of the point Y coordinate of the point Z coordinate of the point Z coordinate of the point Enter Point Enter Point Length of the current segment Length of the current segment Angle of the current segment Angle of the current segment Locks the current angle Locks the current angle Radius of the circle Radius of the circle Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Finish Terminare Finishes the current drawing or editing operation Finishes the current drawing or editing operation Modify Objects Modify Objects Facebinder Elements Facebinder Elements If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset OCC-style offset OCC-style offset Undo Undo If checked, objects will be copied instead of moved If checked, objects will be copied instead of moved Undo the last segment Undo the last segment Enter a point with given coordinates Enter a point with given coordinates Make face Fașa planului If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled Chained mode Chained mode Finishes and closes the current line Finishes and closes the current line Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point Reorients the working plane on the last segment Reorients the working plane on the last segment Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension Sides Sides Number of sides Number of sides Modify subelements Modify subelements If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects Autogroup off Autogroup off Line Linie DWire DWire Circle Cerc Arc Arc Rotate Rotire Point Punct Label Etichetă Offset Compensare Distance Distance Offset distance Offset distance Trimex Trimex Local {} Local {} Global {} Global {} Autogroup: Autogroup: Faces Fete Remove Elimină Add Adaugă Draft Pescaj Converting: Converting: Conversion successful Conversion successful LibreDWG converter not found LibreDWG converter not found ODA converter not found ODA converter not found QCAD converter not found Convertor QCAD nu a fost găsit No suitable external DWG converter has been found. Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences No suitable external DWG converter has been found. Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. Eroare în timpul conversiei DWG. Încercați să mutați fișierul DWG într-o cale director, fără spații și caractere non-engleze, sau încercați să salvați într-o versiune DWG mai mică. Custom Personalizat Unable to convert input into a scale factor Imposibil de convertit input într-un factor de scară Set Custom Scale Set Custom Scale Draft Scale Widget A context menu action used to show or hide this toolbar widget Draft Scale Widget Set the scale used by Draft annotation tools Set the scale used by Draft annotation tools Draft Snap Widget A context menu action used to show or hide this toolbar widget Draft Snap Widget Set custom annotation scale in format x:x, x=x Setează scara de adnotare personalizată în format x:x, x=x No active document. Aborting. Niciun document activ. Abandonat. Wrong input: object {} not in document. Wrong input: object {} not in document. Unable to insert new object into a scaled part Imposibil de inserat un obiect nou într-o parte scalată Symbol not implemented. Using a default symbol. Simbol neimplementat. Folosind un simbol implicit. image is Null imaginea este nulă filename does not exist on the system or in the resource file numele fișierului nu există în sistem sau în fișierul de resurse unable to load texture nu se poate încărca textura Does not have 'ViewObject.RootNode'. Nu are 'ViewObject.RootNode'. Solids: Solide: Faces: Fete: Wires: Firi: Edges: Margini: Vertices: Verticale: Face Faţă Wire Polilinie different types diferite tipuri Objects have different placements. Distance between the two base points: Objects have different placements. Distance between the two base points: %s cannot be modified because its placement is readonly %s cannot be modified because its placement is readonly This function will be deprecated in {}. Please use '{}'. This function will be deprecated in {}. Please use '{}'. This function will be deprecated. Please use '{}'. This function will be deprecated. Please use '{}'. has a different value are o valoare diferită doesn't exist in one of the objects nu există într-unul din obiecte %s shares a base with %d other objects. Please check if you want to modify this. %s distribuie o bază cu %d alte obiecte. Te rugăm să verifici dacă vrei să modifici acest lucru. Wrong input: unknown document {} Wrong input: unknown document {} Pick target point Alege punctul țintă Create Label Creare etichetă Pick endpoint of leader line Alege criteriul final al liniei de lider Pick text position Alege poziţia textului Pick first point Alege primul punct Edges do not intersect! Edges do not intersect! Create Line Crează linie Create Wire Crează Wire %1 pick next point, snap to first point to close %1 pick next point, snap to first point to close %1 pick next point %1 pick next point Unable to create a wire from the selected objects Unable to create a wire from the selected objects Polyline Polilină Pick next point Alege următorul punct Convert to Wire Convertește în Wire Select an object to join Select an object to join Join Lines Join Lines Only Draft lines and wires can be joined Only Draft lines and wires can be joined Selection: Selecţie: Pick location point Pick location point Create Text Create Text Select an object to convert Select an object to convert Convert to Sketch Convert to Sketch Convert to Draft Convert to Draft Convert Draft/Sketch Convert Draft/Sketch Select an object to move Select an object to move Pick start point Pick start point Pick end point Pick end point No valid subelements selected No valid subelements selected Move Mută Pick center point Pick center point Pick radius Pick radius Start angle Start angle Pick start angle Pick start angle Aperture angle Aperture angle Pick aperture Pick aperture %1 constrain %1 constrain %1 snap %1 snap %1/%2/%3 switch constraint %1/%2/%3 switch constraint %1 toggle relative %1 toggle relative %1 toggle global %1 toggle global %1 toggle continue %1 toggle continue %1 pick center %1 pick center %1 pick radius %1 pick radius %1 pick aperture %1 pick aperture Create Circle (Part) Create Circle (Part) Create Circle Create Circle Create Arc (Part) Create Arc (Part) Create Arc Create Arc Pick aperture angle Pick aperture angle %1 pick start angle %1 pick start angle Arc From 3 Points Arc From 3 Points Create Arc From 3 Points Create Arc From 3 Points %1 pick first point %1 pick first point %1 pick second point %1 pick second point %1 pick third point %1 pick third point Select an object to edit Select an object to edit Select a Draft object to edit Select a Draft object to edit Edit Node Edit Node Too many objects selected, maximum number set to: Too many objects selected, maximum number set to: No edit point found for selected object No edit point found for selected object : this object is not editable : this object is not editable Annotation Style Editor Annotation Style Editor New Style New Style Style name Nume stil Style name required Style name required No style name specified No style name specified Style exists Style exists This style name already exists This style name already exists Style in use Style in use This style is used by some objects in this document. Proceed? This style is used by some objects in this document. Proceed? Rename Style Rename Style New name New name Open Styles File Open Styles File JSON files (*.json *.JSON) JSON files (*.json *.JSON) Save Styles File Save Styles File JSON file (*.json) JSON file (*.json) Select an object to project Select an object to project Create 2D View Create 2D View Create Point Create Point %1 pick point %1 pick point Select an object to rotate Select an object to rotate Pick rotation center Pick rotation center Base angle Base angle The base angle to start the rotation from The base angle to start the rotation from The amount of rotation to perform. The final angle will be the base angle plus this amount. The amount of rotation to perform. The final angle will be the base angle plus this amount. Pick base angle Pick base angle Rotation Rotation Pick rotation angle Pick rotation angle Add to New Group Add to New Group Add to Group Add to Group No new selection. Select non-empty groups or objects inside groups. No new selection. Select non-empty groups or objects inside groups. New Layer New Layer Layer name Layer name Layer Object label Layer New layer Stratul nou Add to Construction Group Add to Construction Group New Group New Group Group name Group name Group Object label Grup New named group New named group Ungroup Ungroup Group Grup Fillet radius Rază de umplere Radius of the fillet Radius of the fillet Enter radius Enter radius Create Fillet Create Fillet Fillet cannot be created Fillet nu poate fi creat Polygon Poligon Create Polygon (Part) Crează poligon (Parte) Create Polygon Creare poligon Select objects to trim or extend Selectați obiecte de tăiat sau extins This object is not supported This object is not supported Only a single face can be extruded Only a single face can be extruded Trimex does not support this object type Trimex does not support this object type Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported These objects do not intersect These objects do not intersect Too many intersection points Too many intersection points Offset only works on one object at a time Offset only works on one object at a time Offset of Bézier curves is currently not supported Offset of Bézier curves is currently not supported Pick distance Alege distanța Offset angle Offset unghi Unable to trim these objects, too many wires Imposibil de tăiat aceste obiecte, prea multe cabluri B-Spline B-Spline Create B-Spline Create B-Spline Change Style Schimbă stilul This object does not support possible coincident points This object does not support possible coincident points Delete Point Delete Point Add Point Add Point Open Wire Open Wire Close Wire Close Wire Reverse Wire Reverse Wire Active object must have more than 2 points or nodes Active object must have more than 2 points or nodes Open Spline Open Spline Close Spline Close Spline Reverse Spline Reverse Spline Move Arc Move Arc Set First Angle Set First Angle Set Last Angle Set Last Angle Set Radius Set Radius Invert Arc Invert Arc Make Sharp Make Sharp Make Tangent Make Tangent Make Symmetric Make Symmetric Reverse Curve Reverse Curve Open Curve Open Curve Close Curve Close Curve Selection is not a knot Selection is not a knot Endpoint of Bézier curve cannot be smoothed Endpoint of Bézier curve cannot be smoothed Active object must have more than two points/nodes Obiectul activ trebuie să aibă mai mult de două puncte/noduri Bézier Curve Bézier Curve Create Bézier Curve Create Bézier Curve Cubic Bézier Curve Cubic Bézier Curve Click and drag to define next knot Click and drag to define next knot %1 click and drag to define first point and knot %1 click and drag to define first point and knot %1 click and drag to define next point and knot %1 click and drag to define next point and knot Ellipse Elipsa Create Ellipse Create Ellipse Pick opposite point Pick opposite point %1 pick opposite point %1 pick opposite point Select faces from existing objects Select faces from existing objects Select an object to scale Select an object to scale Pick base point Pick base point Pick reference distance from base point Pick reference distance from base point Zero scale factor not allowed Zero scale factor not allowed Scale Scalare Pick new distance from base point Pick new distance from base point Layer Layer Create Dimension Create Dimension Edge too short! Edge too short! Select an object to stretch Select an object to stretch Pick first point of selection rectangle Pick first point of selection rectangle Pick the opposite point of the selection rectangle Pick the opposite point of the selection rectangle Turning a rectangle into a wire Turning a rectangle into a wire Pick start point of displacement Pick start point of displacement Pick end point of displacement Pick end point of displacement Stretch Stretch Rectangle Dreptunghi Create Plane Create Plane Create Rectangle Create Rectangle Select an object to mirror Select an object to mirror Pick start point of mirror line Pick start point of mirror line Mirror Mirror Pick end point of mirror line Pick end point of mirror line Select an object to clone Select an object to clone Cannot clone objects without a shape, aborting Cannot clone objects without a shape, aborting Cannot clone objects without a shape, skipping them Cannot clone objects without a shape, skipping them Select an object to upgrade Select an object to upgrade Upgrade Upgrade Select an object to offset Select an object to offset Cannot offset this object type Cannot offset this object type Pick ShapeString location point Pick ShapeString location point Create ShapeString Create ShapeString Heal Heal Downgrade Downgrade Object: Object: Polar Array Polar Array Number of elements must be at least 2 Number of elements must be at least 2 The angle is above 360 degrees. It is set to this value to proceed. The angle is above 360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. Create Polar Array Create Polar Array Fuse: Fuse: Create Link array: Create Link array: Number of elements: Number of elements: Polar angle: Polar angle: Center of rotation: Center of rotation: Orthogonal Array Orthogonal Array Number of elements must be at least 1 Number of elements must be at least 1 In linear mode, at least 1 axis must be selected In linear mode, at least 1 axis must be selected Create Orthogonal Array Create Orthogonal Array Create link array: Create link array: Number of X elements: Number of X elements: Interval X: Interval X: Number of Y elements: Number of Y elements: Interval Y: Interval Y: Number of Z elements: Number of Z elements: Interval Z: Interval Z: Switch to Ortho Mode Switch to Ortho Mode X-Axis Axa X Y-Axis Axa Y Z-Axis Axa Z Switch to Linear Mode Switch to Linear Mode Number of elements Numărul de elemente Interval Interval ShapeString Formă din text Default Implicit Radial distance is zero. Resulting array may not look correct. Radial distance is zero. Resulting array may not look correct. Radial distance is negative. It is made positive to proceed. Radial distance is negative. It is made positive to proceed. Circular Array Circular Array At least 1 element must be selected At least 1 element must be selected Number of layers must be at least 2 Number of layers must be at least 2 Selection is not suitable for array Selection is not suitable for array Tangential distance cannot be 0 Tangential distance cannot be 0 Tangential distance is negative. It is made positive to proceed. Tangential distance is negative. It is made positive to proceed. Create Circular Array Create Circular Array Radial distance: Radial distance: Tangential distance: Tangential distance: Number of concentric circles: Number of concentric circles: Symmetry parameter: Symmetry parameter: Font file not found Font file not found Specified font file is not a file Specified font file is not a file Specified font type is not supported Specified font type is not supported ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: string has no wires ShapeString: string has no wires ShapeString: face creation failed for one character ShapeString: face creation failed for one character , path object does not have 'Edges'. , path object does not have 'Edges'. Start Offset too large for path length. Using 0 instead. Start Offset too large for path length. Using 0 instead. End Offset too large for path length minus Start Offset. Using 0 instead. End Offset too large for path length minus Start Offset. Using 0 instead. Length of tangent vector is 0. Copy not aligned. Length of tangent vector is 0. Copy not aligned. Length of normal vector is 0. Using a default axis instead. Length of normal vector is 0. Using a default axis instead. Spacing unit of 0 is not allowed, using default Spacing unit of 0 is not allowed, using default Operation would generate too many objects. Aborting Operation would generate too many objects. Aborting Tangent and normal vectors are parallel. Normal replaced by a default axis. Tangent and normal vectors are parallel. Normal replaced by a default axis. Cannot calculate normal vector. Using the default normal instead. Cannot calculate normal vector. Using the default normal instead. AlignMode {} is not implemented AlignMode {} is not implemented No shape found No shape found All shapes must be planar All shapes must be planar Points: Points: Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. Placement: Placement: Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. Wrong input: incorrect type of points. Wrong input: incorrect type of points. Cannot generate shape: Cannot generate shape: Wrong input: base_object not in document. Wrong input: base_object not in document. Wrong input: path_object not in document. Wrong input: path_object not in document. Wrong input: must be a number. Wrong input: must be a number. Wrong input: must be a vector. Wrong input: must be a vector. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be a number or vector. Wrong input: must be a number or vector. Input: single value expanded to vector. Input: single value expanded to vector. Wrong input: must be an integer number. Wrong input: must be an integer number. Input: number of elements must be at least 1. It is set to 1. Input: number of elements must be at least 1. It is set to 1. Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. Wrong input: target_object must not be a list. Wrong input: target_object must not be a list. Wrong input: target_object not in document. Wrong input: target_object not in document. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelement {} not in object. Wrong input: subelement {} not in object. Wrong input: label_type must be a string. Wrong input: label_type must be a string. Wrong input: label_type must be one of the following: Wrong input: label_type must be one of the following: Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: points {} must be a list of at least two vectors. Wrong input: points {} must be a list of at least two vectors. Direction is not 'Custom'; points won't be used. Direction is not 'Custom'; points won't be used. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: point_object not in document. Wrong input: point_object not in document. Wrong input: object has the wrong type. Wrong input: object has the wrong type. This function is deprecated. Do not use this function directly. This function is deprecated. Do not use this function directly. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object not in document. Wrong input: edge_object not in document. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. Wrong input: must be an integer. Wrong input: must be an integer. i1: values below 1 are not allowed; will be set to 1. i1: values below 1 are not allowed; will be set to 1. Wrong input: vertex not in object. Wrong input: vertex not in object. i2: values below 1 are not allowed; will be set to the last vertex in the object. i2: values below 1 are not allowed; will be set to the last vertex in the object. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. index: values below 1 are not allowed; will be set to 1. index: values below 1 are not allowed; will be set to 1. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to a circular edge. Wrong input: index doesn't correspond to a circular edge. Wrong input: must be a string, 'radius' or 'diameter'. Wrong input: must be a string, 'radius' or 'diameter'. Wrong input: must be a list with two angles. Wrong input: must be a list with two angles. Wrong input: must be a number or quantity. Wrong input: must be a number or quantity. Layers Layers Wrong input: it must be a string. Wrong input: it must be a string. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be a number between 0 and 100. Wrong input: must be a number between 0 and 100. Edit Editare Flatten Flatten Upgrade: Unknown force method: Upgrade: Unknown force method: Found 1 block: exploding it Found 1 block: exploding it Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies Downgrade: Unknown force method: Downgrade: Unknown force method: Found 1 array: exploding it Found 1 array: exploding it Found 2 objects: subtracting them Found 2 objects: subtracting them Found several faces: splitting them Found several faces: splitting them Found several faces: subtracting them from the first one Found several faces: subtracting them from the first one Unable to downgrade these objects Unable to downgrade these objects Found 1 face: extracting its wires Found 1 face: extracting its wires Found only wires: extracting their edges Found only wires: extracting their edges No object given No object given The two points are coincident The two points are coincident mirrored mirrored Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it Found 2 objects: fusing them Found 2 objects: fusing them Found groups: closing open wires inside Found groups: closing open wires inside Found meshes: turning them into Part shapes Found meshes: turning them into Part shapes Found object with several coplanar faces: refining them Found object with several coplanar faces: refining them Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it Found closed wires: creating faces Found closed wires: creating faces Found several wires or edges: wiring them Found several wires or edges: wiring them Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound Unable to upgrade these objects Unable to upgrade these objects Found 1 open wire: closing it Found 1 open wire: closing it Found 1 non-parametric object: replacing it with a Draft object Found 1 non-parametric object: replacing it with a Draft object Found points: creating compound Found points: creating compound Text Text No Target No Target Invalid label type Invalid label type Tag not available for object Tag not available for object Material not available for object Material not available for object Position not available for (sub)object Position not available for (sub)object Length not available for (sub)object Length not available for (sub)object Area not available for (sub)object Area not available for (sub)object Volume not available for (sub)object Volume not available for (sub)object Opening Multiple Links Opening Multiple Links Multiple links found Multiple links found This may lead to the opening of various windows This may lead to the opening of various windows File not found: File not found: Opening hyperlink Opening hyperlink Select 3 vertices, one or more shapes or an object to define a working plane Select 3 vertices, one or more shapes or an object to define a working plane Do you want to update the SVG pattern options of existing objects in all opened documents? Do you want to update the SVG pattern options of existing objects in all opened documents? Sketch is too complex to edit: it is suggested to use the default Sketcher editor Sketch is too complex to edit: it is suggested to use the default Sketcher editor Create layer Create layer Remove From Layer Remove From Layer Add to New Layer Add to New Layer Remove from layer Remove from layer Add to new layer Add to new layer Add to layer Add to layer Layers change Layers change Flip Dimension Flip Dimension Toggle Grid Toggle Grid Change Slope Change Slope Select exactly 2 objects, the base object and the path object, before calling this command Select exactly 2 objects, the base object and the path object, before calling this command Create Path Array Create Path Array Create Path Twisted Array Create Path Twisted Array Select exactly 2 objects, the base object and the point object, before calling this command Select exactly 2 objects, the base object and the point object, before calling this command Create Point Array Create Point Array Click anywhere on a line to split it Click anywhere on a line to split it Split Line Split Line No active Draft toolbar No active Draft toolbar Construction Mode Construction Mode Toggle Display Mode Toggle Display Mode 2 edges are needed 2 edges are needed Edges are not connected or radius is too large Edges are not connected or radius is too large Unable to build facebinder Unable to build facebinder No valid faces for facebinder No valid faces for facebinder Unable to build facebinder, resuming with sew disabled Unable to build facebinder, resuming with sew disabled Converting flat B-spline faces of facebinder to planar faces failed Converting flat B-spline faces of facebinder to planar faces failed Activate Layer Activate Layer Reassign Properties of Layer Reassign Properties of Layer Select Layer Contents Select Layer Contents Add New Layer Add New Layer Reassign Properties of All Layers Reassign Properties of All Layers Merge Layer Duplicates Merge Layer Duplicates The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. PAT file not found PAT file not found Specified PAT file is not a file Specified PAT file is not a file Specified file type is not supported Specified file type is not supported Pattern not found in PAT file Pattern not found in PAT file Workbench Draft Creation Draft Creation Draft Annotation Draft Annotation Draft Modification Draft Modification Draft Utility Draft Utility Draft Snap Draft Snap &Drafting &Drafting &Annotation &Anotare &Modification &Modification &Utilities &Utilities Arc Tools Arc Tools Bézier Tools Bézier Tools Array Tools Array Tools Draft Fillet Rotunjire Delete original objects Delete original objects Create chamfer Create chamfer Save style Save style Name of this new style Name of this new style Warning Avertismente Name exists. Overwrite? Name exists. Overwrite? Error: json module not found. Unable to load style Error: json module not found. Unable to load style Error: json module not found. Unable to save style Error: json module not found. Unable to save style Slope Slope True Adevărat False Fals Scale Scalare X-factor X-factor Y-factor Y-factor Z-factor Z-factor Uniform scaling Uniform scaling Copy Copiere Modify subelements Modify subelements Pick From/To Points Pick From/To Points Edit Scale Edit Scale Create a clone Creaţi o clona _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. Writing camera position Scrie poziția camerei Writing objects shown/hidden state Writing objects shown/hidden state On On Name Nume Line Width Line Width Draw Style Draw Style Line Color Culoarea liniei Face Color Face Color Line Print Color Line Print Color Transparency Transparenţă New Layer New Layer Custom Personalizat Label Etichetă Position Position Length Lungime Area Suprafață Volume Volum Tag Tag Material Materialul Label + Position Label + Position Label + Length Label + Length Label + Area Label + Area Label + Volume Label + Volume Label + Material Label + Material Create Clone Creare clonă Choose a base object before using this command Choose a base object before using this command Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. Point object does not have a discrete point, it cannot be used for an array Point object does not have a discrete point, it cannot be used for an array Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager importOCA OCA: found no data to export OCA: found no data to export successfully exported successfully exported ImportAirfoilDAT Did not find enough coordinates Did not find enough coordinates ImportSVG Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated The export list contains no object with a valid bounding box The export list contains no object with a valid bounding box Draft_Label Label Etichetă Creates a label, optionally attached to a selected object or subelement Creates a label, optionally attached to a selected object or subelement Draft_Line Line Linie Creates a 2-point line Creates a 2-point line Draft_Wire Polyline Polilină Creates a polyline Creates a polyline Draft_Hatch Hatch Hașură Creates hatches on the faces of a selected object Creates hatches on the faces of a selected object Draft_Join Join Join Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. Draft_Text Text Text Creates a multi-line annotation Creates a multi-line annotation Draft_Move Move Mută Moves the selected objects. If the "Copy" option is active, it creates displaced copies. Moves the selected objects. If the "Copy" option is active, it creates displaced copies. Draft_Arc Arc Arc Creates a circular arc from a center point and a radius Creates a circular arc from a center point and a radius Draft_Edit Edit Editare Edits the active object Edits the active object Draft_Point Point Punct Creates a point Creates a point Draft_Rotate Rotate Rotire Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. Draft_Fillet Fillet Rotunjire Creates a fillet between 2 selected edges Creates a fillet between 2 selected edges Draft_Polygon Polygon Poligon Creates a regular polygon (triangle, square, pentagon…) Creates a regular polygon (triangle, square, pentagon…) Draft_Split Split Divizare Splits the selected line or polyline at a specified point Splits the selected line or polyline at a specified point Draft_Trimex Trimex Trimex Trims or extends the selected object, or extrudes single faces Trims or extends the selected object, or extrudes single faces Draft_Circle Circle Cerc Creates a circle (full circular arc) Creates a circle (full circular arc) Draft_Ellipse Ellipse Elipsa Creates an ellipse Creates an ellipse Draft_Facebinder Facebinder Facebinder Creates a facebinder from the selected faces Creates a facebinder from the selected faces Draft_OrthoArray Array Array Creates copies of the selected object in an orthogonal pattern Creates copies of the selected object in an orthogonal pattern Draft_Scale Scale Scalare Scales the selected objects from a base point Scales the selected objects from a base point Draft_Layer New Layer New Layer Adds a layer to the document. Objects added to this layer can share the same visual properties. Adds a layer to the document. Objects added to this layer can share the same visual properties. Draft_Dimension Dimension Dimensiune Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges Draft_Stretch Stretch Stretch Stretches the selected objects Stretches the selected objects Draft_Rectangle Rectangle Dreptunghi Creates a 2-point rectangle Creates a 2-point rectangle Draft_Mirror Mirror Mirror Mirrors the selected objects along a line defined by 2 points Mirrors the selected objects along a line defined by 2 points Draft_Clone Clone Clonă Creates a clone of the selected objects Creates a clone of the selected objects Draft_Upgrade Upgrade Upgrade Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Draft_Offset Offset Compensare Offsets the selected object. It can also create an offset copy of the original object. Offsets the selected object. It can also create an offset copy of the original object. Draft_Heal Heal Heal Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. Draft_Downgrade Downgrade Downgrade Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. App::Property The placement of the base point of the first line The placement of the base point of the first line The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. Text string Text Font file name Font file name Height of text Height of text Horizontal and vertical alignment Horizontal and vertical alignment Height reference used for justification Height reference used for justification Keep left margin and leading white space when justification is left Keep left margin and leading white space when justification is left Scale to ensure cap height is equal to size Scale to ensure cap height is equal to size Inter-character spacing Inter-character spacing Oblique (slant) angle Oblique (slant) angle Fill letters with faces Fill letters with faces Fuse faces if faces overlap, usually not required (can be very slow) Fuse faces if faces overlap, usually not required (can be very slow) The base object used by this object The base object used by this object The PAT file used by this object The PAT file used by this object The pattern name used by this object The pattern name used by this object The pattern scale used by this object The pattern scale used by this object The pattern rotation used by this object The pattern rotation used by this object If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) The objects included in this clone The objects included in this clone The scale factor of this clone The scale factor of this clone If Clones includes several objects, set True for fusion or False for compound If Clones includes several objects, set True for fusion or False for compound Always create a compound Always create a compound Start angle of the arc Start angle of the arc End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) Radius of the circle Radius of the circle Create a face Create a face The area of this object The area of this object The objects that are part of this layer The objects that are part of this layer Number of faces Number of faces Radius of the control circle Radius of the control circle How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle Radius to use to fillet the corners Radius to use to fillet the corners Size of the chamfer to give to the corners Size of the chamfer to give to the corners The base object that will be duplicated. The base object that will be duplicated. The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. Number of copies to create. Number of copies to create. Rotation factor of the twisted array. Rotation factor of the twisted array. Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) The placement for each array element The placement for each array element The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The placement of the 'Text' element in 3D space The placement of the 'Text' element in 3D space The text to display when 'Label Type' is set to 'Custom' The text to display when 'Label Type' is set to 'Custom' The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like BIM objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like BIM objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. The base object that will be duplicated The base object that will be duplicated List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode Number of copies to create Number of copies to create Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Alignment vector for 'Tangent' mode Alignment vector for 'Tangent' mode Direction of the local Z axis when 'Force Vertical' is true Direction of the local Z axis when 'Force Vertical' is true Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Walk the path backwards. Walk the path backwards. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. Base fixed distance between elements. Base fixed distance between elements. Use repeating spacing patterns instead of uniform spacing. Use repeating spacing patterns instead of uniform spacing. Spacing is multiplied by a corresponding number in this sequence. Spacing is multiplied by a corresponding number in this sequence. Length from the start of the path to the first copy. Length from the start of the path to the first copy. Length from the end of the path to the last copy. Length from the end of the path to the last copy. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) Number of copies in X-direction Number of copies in X-direction Number of copies in Y-direction Number of copies in Y-direction Number of copies in Z-direction Number of copies in Z-direction Distance and orientation of intervals in X-direction Distance and orientation of intervals in X-direction Distance and orientation of intervals in Y-direction Distance and orientation of intervals in Y-direction Distance and orientation of intervals in Z-direction Distance and orientation of intervals in Z-direction The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. Number of copies in the polar direction Number of copies in the polar direction Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction Angle to cover with copies Angle to cover with copies Distance between concentric circles Distance between concentric circles Distance between copies in the same circle Distance between copies in the same circle Number of concentric circle. The 'Base' object counts as one circle. Number of concentric circle. The 'Base' object counts as one circle. A parameter that determines how many symmetry planes the circular array will have A parameter that determines how many symmetry planes the circular array will have Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Base object that will be duplicated Base object that will be duplicated Object containing points used to distribute the copies. Object containing points used to distribute the copies. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Additional placement, shift and rotation, that will be applied to each copy Additional placement, shift and rotation, that will be applied to each copy The base object this 2D view must represent The base object this 2D view must represent The projection vector of this object The projection vector of this object The way the viewed object must be projected The way the viewed object must be projected The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode Show hidden lines Afișează liniile ascunse Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments If this is True, this object will include only visible objects If this is True, this object will include only visible objects A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property This object will be recomputed only if this is True. This object will be recomputed only if this is True. The points of the Bezier curve The points of the Bezier curve The degree of the Bezier function The degree of the Bezier function Continuity Continuitate If the Bezier curve should be closed or not If the Bezier curve should be closed or not Create a face if this curve is closed Create a face if this curve is closed The length of this object The length of this object The placement of this object Plasarea acestui obiect X Location X Location Y Location Y Location Z Location Z Location Start angle of the elliptical arc Start angle of the elliptical arc End angle of the elliptical arc (for a full circle, give it same value as First Angle) End angle of the elliptical arc (for a full circle, give it same value as First Angle) Minor radius of the ellipse Minor radius of the ellipse Major radius of the ellipse Major radius of the ellipse Area of this object Area of this object The start point of this line. The start point of this line. The end point of this line. The end point of this line. The length of this line. The length of this line. Radius to use to fillet the corner. Radius to use to fillet the corner. The normal direction of the text of the dimension The normal direction of the text of the dimension The object measured by this dimension The object measured by this dimension The object, and specific subelements of it, that this dimension is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. The object, and specific subelements of it, that this dimension is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. When measuring circular arcs, it determines whether to display the radius or the diameter value When measuring circular arcs, it determines whether to display the radius or the diameter value Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. Length of the rectangle Length of the rectangle Height of the rectangle Height of the rectangle Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle Linked faces Linked faces Specifies if splitter lines must be removed Specifies if splitter lines must be removed An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces An optional offset value to be applied to all faces An optional offset value to be applied to all faces This specifies if the shapes sew This specifies if the shapes sew The area of the faces of this Facebinder The area of the faces of this Facebinder The components of this block The components of this block The vertices of the wire The vertices of the wire If the wire is closed or not If the wire is closed or not The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The start point of this line The start point of this line The end point of this line The end point of this line The length of this line The length of this line Create a face if this object is closed Create a face if this object is closed The number of subdivisions of each edge The number of subdivisions of each edge The points of the B-spline The points of the B-spline If the B-spline is closed or not If the B-spline is closed or not Create a face if this B-spline is closed Create a face if this B-spline is closed Parameterization factor Parameterization factor Force sync pattern placements even when array elements are expanded Force sync pattern placements even when array elements are expanded Show the individual array elements Show the individual array elements Text color Culoare text Line spacing (relative to font size) Line spacing (relative to font size) Vertical alignment Vertical alignment Maximum number of characters on each line of the text box Maximum number of characters on each line of the text box Horizontal alignment Horizontal alignment The type of frame around the text of this object The type of frame around the text of this object Display a leader line or not Display a leader line or not Line width Latimea liniei Line color Culoarea liniei Defines an SVG pattern. Defines an SVG pattern. Defines the size of the SVG pattern. Defines the size of the SVG pattern. If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the print color will be used when objects in this layer are placed on a TechDraw page If it is true, the print color will be used when objects in this layer are placed on a TechDraw page The line color of the objects contained within this layer The line color of the objects contained within this layer The shape color of the objects contained within this layer The shape color of the objects contained within this layer The shape appearance of the objects contained within this layer The shape appearance of the objects contained within this layer The line width of the objects contained within this layer The line width of the objects contained within this layer The draw style of the objects contained within this layer The draw style of the objects contained within this layer The transparency of the objects contained within this layer The transparency of the objects contained within this layer The line color of the objects contained within this layer, when used on a TechDraw page The line color of the objects contained within this layer, when used on a TechDraw page Font name Nume font Font size Dimensiunea fontului Spacing between text and dimension line Spacing between text and dimension line Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees Text Position. Leave '(0,0,0)' for automatic position Text Position. Leave '(0,0,0)' for automatic position Text override. Write '$dim' so that it is replaced by the dimension length. Text override. Write '$dim' so that it is replaced by the dimension length. The number of decimals to show The number of decimals to show Show the unit suffix Arată sufixul unității A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation Arrow size Dimensiunea săgeții Arrow type Tipul de săgeată Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines Length of the extension lines Lungimea liniilor de extensie Length of the extension line beyond the dimension line Length of the extension line beyond the dimension line Shows the dimension line and arrows Shows the dimension line and arrows The display length of this section plane Lungimea de afişare a acestui plan de secţiune The size of the arrows of this section plane Dimensiunea săgeţilor acestui plan de secţiune Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) Command Transform Transformare QObject Draft Ciornă Import-Export Import/Export Draft_AnnotationStyleEditor Annotation Styles Annotation Styles Opens an editor to manage or create annotation styles Opens an editor to manage or create annotation styles Draft_Arc_3Points Arc From 3 Points Arc From 3 Points Creates a circular arc from 3 points Creates a circular arc from 3 points Draft_ArcTools Arc Tools Arc Tools Tools to create various types of circular arcs Tools to create various types of circular arcs Draft_ArrayTools Array Tools Array Tools Tools to create various types of arrays, including rectangular, polar, circular, path, and point arrays Tools to create various types of arrays, including rectangular, polar, circular, path, and point arrays Draft_BezCurve Bézier Curve Bézier Curve Creates an n-degree Bézier curve. The more points, the higher the degree. Creates an n-degree Bézier curve. The more points, the higher the degree. Draft_CubicBezCurve Cubic Bézier Curve Cubic Bézier Curve Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments. Control points and properties of each knot can be edited after creation. Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments. Control points and properties of each knot can be edited after creation. Draft_BezierTools Bézier Tools Bézier Tools Tools to create various types of Bézier curves Tools to create various types of Bézier curves Draft_CircularArray Circular Array Circular Array Creates copies of the selected object in a radial pattern with 1 or more circular layers Creates copies of the selected object in a radial pattern with 1 or more circular layers Draft_FlipDimension Flip Dimension Flip Dimension Flips the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Flips the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Draft_Draft2Sketch Draft to Sketch Draft to Sketch Converts bidirectionally between Draft objects and sketches. Multiple selected Draft objects are converted into a single sketch. However, a single sketch with disconnected traces is converted into several individual Draft objects. Converts bidirectionally between Draft objects and sketches. Multiple selected Draft objects are converted into a single sketch. However, a single sketch with disconnected traces is converted into several individual Draft objects. Draft_ToggleGrid Toggle Grid Toggle Grid Toggles the visibility of the Draft grid Toggles the visibility of the Draft grid Draft_AddToGroup Add to Group Add to Group Adds selected objects to a group, or removes them from any group Adds selected objects to a group, or removes them from any group Draft_SelectGroup Select Group Select Group Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. Draft_AutoGroup Auto-Group Auto-Group Adds new Draft and BIM objects to the selected layer or group Adds new Draft and BIM objects to the selected layer or group Draft_AddConstruction Add to Construction Group Add to Construction Group Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it does not exist. Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it does not exist. Draft_AddNamedGroup New Named Group New Named Group Adds a group with a given name Adds a group with a given name Draft_Hyperlink Open Links Open Links Opens linked documents Opens linked documents Draft_AddToLayer Add to Layer Add to Layer Adds selected objects to a layer, or removes them from any layer Adds selected objects to a layer, or removes them from any layer Draft_LayerManager Manage Layers Manage Layers Allows to modify the layers Allows to modify the layers Draft_Slope Set Slope Set Slope Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn on the XY-plane. Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn on the XY-plane. Draft_PathArray Path Array Path Array Creates copies of the selected object along a selected path Creates copies of the selected object along a selected path Draft_PathLinkArray Path Link Array Path Link Array Creates linked copies of the selected object along a selected path Creates linked copies of the selected object along a selected path Draft_PathTwistedArray Twisted Path Array Twisted Path Array Creates twisted copies of the selected object along a selected path Creates twisted copies of the selected object along a selected path Draft_PathTwistedLinkArray Twisted Path Link Array Twisted Path Link Array Creates twisted linked copies of the selected object along a selected path Creates twisted linked copies of the selected object along a selected path Draft_WorkingPlaneProxy Working Plane Proxy Working Plane Proxy Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objects Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objects Draft_PointArray Point Array Point Array Creates copies of the selected object at the points of a point object Creates copies of the selected object at the points of a point object Draft_PointLinkArray Point Link Array Point Link Array Creates linked copies of the selected object at the points of a point object Creates linked copies of the selected object at the points of a point object Draft_PolarArray Polar Array Polar Array Creates copies of the selected object in a polar pattern Creates copies of the selected object in a polar pattern Draft_SelectPlane Working Plane Working Plane Defines the working plane from 3 vertices, 1 or more shapes, or an object Defines the working plane from 3 vertices, 1 or more shapes, or an object Draft_SetStyle Set Style Set Style Sets the default style and can apply the style to objects Sets the default style and can apply the style to objects Draft_Shape2DView Shape 2D View Shape 2D View Creates a 2D projection of the selected objects on the XY-plane. The initial projection direction is the opposite of the current active view direction. Creates a 2D projection of the selected objects on the XY-plane. The initial projection direction is the opposite of the current active view direction. Draft_ShapeString Shape From Text Shape From Text Creates a shape from a text string and a specified font Creates a shape from a text string and a specified font Draft_Snap_Lock Snap Lock Snap Lock Enables or disables snapping globally Enables or disables snapping globally Draft_Snap_Midpoint Snap Midpoint Snap Midpoint Snaps to the midpoint of edges Snaps to the midpoint of edges Draft_Snap_Perpendicular Snap Perpendicular Snap Perpendicular Snaps to the perpendicular points on faces and edges Snaps to the perpendicular points on faces and edges Draft_Snap_Grid Snap Grid Snap Grid Snaps to the intersections of grid lines Snaps to the intersections of grid lines Draft_Snap_Intersection Snap Intersection Snap Intersection Snaps to the intersection of 2 edges, and the intersection of a face and an edge Snaps to the intersection of 2 edges, and the intersection of a face and an edge Draft_Snap_Parallel Snap Parallel Snap Parallel Snaps to an imaginary line parallel to straight edges Snaps to an imaginary line parallel to straight edges Draft_Snap_Endpoint Snap Endpoint Snap Endpoint Snaps to the endpoints of edges Snaps to the endpoints of edges Draft_Snap_Angle Snap Angle Snap Angle Snaps to the special cardinal points on circular edges, at multiples of 30° and 45° Snaps to the special cardinal points on circular edges, at multiples of 30° and 45° Draft_Snap_Center Snap Center Snap Center Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building parts Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building parts Draft_Snap_Extension Snap Extension Snap Extension Snaps to an imaginary line that extends beyond the endpoints of straight edges Snaps to an imaginary line that extends beyond the endpoints of straight edges Draft_Snap_Near Snap Near Snap Near Snaps to the nearest point on faces and edges Snaps to the nearest point on faces and edges Draft_Snap_Ortho Snap Ortho Snap Ortho Snaps to imaginary lines that cross the previous point at multiples of 45° Snaps to imaginary lines that cross the previous point at multiples of 45° Draft_Snap_Special Snap Special Snap Special Snaps to special points defined by the object Snaps to special points defined by the object Draft_Snap_Dimensions Snap Dimensions Snap Dimensions Shows temporary X and Y dimensions Shows temporary X and Y dimensions Draft_Snap_WorkingPlane Snap Working Plane Snap Working Plane Projects snap points onto the current working plane Projects snap points onto the current working plane Draft_ShowSnapBar Show Snap Toolbar Show Snap Toolbar Shows the snap toolbar if it is hidden Shows the snap toolbar if it is hidden Draft_BSpline B-Spline B-Spline Creates a multiple-point B-spline Creates a multiple-point B-spline Draft_ApplyStyle Apply Current Style Apply Current Style Applies the current style to the selected objects and groups Applies the current style to the selected objects and groups Draft_SubelementHighlight Highlight Subelements Highlight Subelements Highlights the subelements of the selected objects, to be able to move, rotate, and scale them Highlights the subelements of the selected objects, to be able to move, rotate, and scale them Draft_ToggleConstructionMode Toggle Construction Mode Toggle Construction Mode Toggles the construction mode Toggles the construction mode Draft_ToggleDisplayMode Toggle Wireframe Toggle Wireframe Switches the view style of the selected objects from Flat Lines to Wireframe and back Switches the view style of the selected objects from Flat Lines to Wireframe and back Draft_WireToBSpline Convert Wire/B-Spline Convert Wire/B-Spline Converts the selected polyline to a B-spline, or the selected B-spline to a polyline Converts the selected polyline to a B-spline, or the selected B-spline to a polyline DxfImportDialog DXF Import DXF Import Import As Import As Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Editable Draft objects Editable Draft objects Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing. Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing. Editable Part primitives Editable Part primitives Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Individual Part shapes (recommended) Individual Part shapes (recommended) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for viewing very large files with maximum performance. Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for viewing very large files with maximum performance. Fused Part shapes (fastest) Fused Part shapes (fastest) File summary File summary Warning Avertismente Do not show this dialog again Do not show this dialog again