DialogAnnotation Styles EditorStijlen van aantekening editorRenames the selected styleWijzigt de naam van de geselecteerde stijlRenameHernoemenDeletes the selected styleVerwijder de geselecteerde stijlNewNieuwDeleteVerwijderenLayers ManagerLayers ManagerSelect AllAlles selecterenToggle VisibilityZichtbaarheid aan/uitIsolateIsoleerCancelAnnulerenOKOKImport styles from json fileImporteer stijlen van json bestandExport styles to json fileExporteer stijlen naar json bestandThe font to use for texts and dimensionsHet lettertype voor teksten en afmetingenFont nameFont naamThe font size in system unitsDe lettergrootte in de systeem eenhedenThe width of the linesDe lijndikte px pxThe color of lines and arrowsDe kleur van lijnen en pijlenLine and arrow colorLijn en pijl kleurThe distance the dimension line is additionally extendedDe afstand die de maatlijn extra wordt verlengdDimension line overshootAfmetingslijnoverschrijdingExtension line lengthLengte van de verlenging-lijnThe distance the extension lines are additionally extended beyond the dimension lineDe afstand die de verlengingslijnen nog verder worden uitgebreid dan de afmetingslijnFont sizeLettergrootteThe line spacing for multi-line texts and labels (relative to the font size)De regelafstand voor meerdere regels tekst en labels (ten opzichte van de lettergrootte)The color of texts, dimension texts and label textsDe kleur van tekst, maataanduiding tekst en label tekstText colorTekst kleurUnitsEenhedenA multiplier factor that affects the size of texts and markersEen vermenigvuldigings factor die invloed heeft op de grootte van teksten en markeringenStyle NameStijlnaamThe name of the style. Existing style names can be edited.De naam van de stijl. Bestaande stijlnamen kunnen worden bewerkt.Add new…Nieuwe… toevoegenScale multiplierSchaal vermenigvuldigerThe type of the starting arrows or markers to use for dimensions and labelsThe type of the starting arrows or markers to use for dimensions and labelsStart arrow typeStart arrow typeNoneGeenThe size of the starting arrows or markers in system unitsThe size of the starting arrows or markers in system unitsStart arrow sizeStart arrow sizeThe type of the ending arrows or markers to use for dimensions and labelsThe type of the ending arrows or markers to use for dimensions and labelsEnd arrow typeEnd arrow typeThe size of the ending arrows or markers in system unitsThe size of the ending arrows or markers in system unitsEnd arrow sizeEnd arrow sizeIf it is checked it will show the unit next to the dimension valueAls dit aangevinkt is, wordt de eenheid naast het maatgetal weergegevenShow unitToon eenheidSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitSpecificeer een geldige lengteeenheid zoals mm, m, m, in, ft, om het maatgetal in deze eenheid te forcerenUnit overrideEenheid overschrijvenThe number of decimals to show for dimension valuesHet aantal decimalen te tonen voor de maatgetallenDimension DetailsDimension DetailsThe distance between the dimension text and the dimension lineDe afstand tussen de maat-tekst en de maatlijnText spacingTekstafstandAnnotationsAantekeningenTextsTekstenLine spacing factorLijn regelafstand factorLines and ArrowsLijnen en pijlenDisplays the dimension lineDisplays the dimension lineShow dimension lineAfmetingslijn weergevenLine widthLijndikteDotPuntCircleCirkelArrowPijlTickVinkTick-2Schuine streep-2Shows the unit next to the dimension valueShows the unit next to the dimension valueNumber of decimalsAantal decimalenExtension line overshootExtensielijnoverschrijdingThe length of the extension linesLengte van de verlengingslijnenDraftCircularArrayTaskPanelCircular ArrayCircular ArrayDistance from one layer of objects to the next layer of objectsDistance from one layer of objects to the next layer of objectsRadial distanceRadiale afstandDistance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Afstand van een element in een ring van de reeks tot het volgende element in dezelfde ring.
Het kan niet nul zijn.Tangential distanceTangentiële afstandThe number of symmetry lines in the circular arrayThe number of symmetry lines in the circular arrayCenter of RotationCenter of RotationResets the coordinates of the center of rotationResets the coordinates of the center of rotationReset PointReset PointSymmetrySymmetrieNumber of concentric circles to create, including a copy of the original object.
It must be at least 2.Number of concentric circles to create, including a copy of the original object.
It must be at least 2.Number of concentric circlesNumber of concentric circlesThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.De coördinaten van het punt waar de rotatieas doorheen gaat.
Wijzig de richting van de as zelf in de eigenschapbewerker.XXYYZZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.Indien aangevinkt, worden de resulterende objecten in de reeks samengevoegd als ze elkaar aanraken.
Dit werkt alleen als "Link array" uitgeschakeld is.FuseSamenvoegenIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Indien aangevinkt, wordt het resulterende object een "Linkreeks" in plaats van een normale reeks.
Een linkreeks is efficiënter bij het maken van meerdere kopieën, maar kan niet samengevoegd worden.Link arrayLinkreeksDraftOrthoArrayTaskPanelNumber of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.Aantal elementen in de reeks in de opgegeven richting, inclusief een kopie van het originele object.
Het aantal moet minimaal 1 in elke richting zijn.XXYYZZReset XHerstel XReset YHerstel YDistance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Afstand tussen de elementen in de Z-richting.
Normaal gesproken is alleen de Z-waarde nodig; de andere twee waarden kunnen een extra verschuiving in hun respectievelijke richtingen geven.
Negatieve waarden zullen resulteren in kopieën in de negatieve richting.Orthogonal ArrayOrthogonal ArrayToggles between orthogonal and linear modeToggles between orthogonal and linear modeSwitch to Linear ModeSwitch to Linear ModeX axisX-asY axisY-asZ axisZ-asNumber of ElementsAantal elementenCurrently selected axisHuidige geselecteerde asDistance between the elements in the X-direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the X-direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.X IntervalsX IntervalsResets the distancesResets the distancesDistance between the elements in the Y-direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the Y-direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Y IntervalsY IntervalsZ IntervalsZ IntervalsReset ZHerstel ZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.Indien aangevinkt, worden de resulterende objecten in de reeks samengevoegd als ze elkaar aanraken.
Dit werkt alleen als "Link array" uitgeschakeld is.FuseSamenvoegenIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Indien aangevinkt, wordt het resulterende object een "Linkreeks" in plaats van een normale reeks.
Een linkreeks is efficiënter bij het maken van meerdere kopieën, maar kan niet samengevoegd worden.Link arrayLinkreeksDraftPolarArrayTaskPanelPolar ArrayPolar ArraySweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Sweephoek van de poolverdeling.
Een negatieve hoek produceert een poolpatroon in de tegenovergestelde richting.
De maximale absolute waarde is 360 graden.Polar anglePool hoekNumber of elements in the array, including a copy of the original object.
It must be at least 2.Aantal elementen in de reeks, inclusief een kopie van het oorspronkelijke object.
Het moet ten minste 2 zijn.Number of elementsAantal elementenThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.De coördinaten van het punt waar de rotatieas doorheen gaat.
Wijzig de richting van de as zelf in de eigenschapbewerker.Center of RotationCenter of RotationResets the coordinates of the center of rotationResets the coordinates of the center of rotationReset PointReset PointXXYYZZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.Indien aangevinkt, worden de resulterende objecten in de reeks samengevoegd als ze elkaar aanraken.
Dit werkt alleen als "Link array" uitgeschakeld is.FuseSamenvoegenIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Indien aangevinkt, wordt het resulterende object een "Linkreeks" in plaats van een normale reeks.
Een linkreeks is efficiënter bij het maken van meerdere kopieën, maar kan niet samengevoegd worden.Link arrayLinkreeksDraftShapeStringGuiShapeStringTekenreeksvormXXYYZZCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemGlobalOveralFont files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)Text to be made into ShapeStringTekst die omgezet moet worden in ShapeStringEnter coordinates or pick a point with the mouseEnter coordinates or pick a point with the mouseResets the picked pointResets the picked pointReset PointReset PointHeightHoogteHeight of the resultHoogte van het resultaatTextTekstFont fileLettertypebestandFormTop (XY)Bovenkant (XY)Front (XZ)Voorkant (XZ)Side (YZ)Zijkant (YZ)Sets the working plane facing the current viewZet het werkvlak in de richting van de huidige schermweergaveWorking Plane SetupWorking Plane SetupChoose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view.Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view.Sets the working plane to the XY-plane (ground plane)Sets the working plane to the XY-plane (ground plane)Sets the working plane to the XZ-plane (front plane)Sets the working plane to the XZ-plane (front plane)Sets the working plane to the YZ-plane (side plane)Sets the working plane to the YZ-plane (side plane)Align to ViewAlign to ViewThe working plane will align to the current
view each time a command is startedHet werkvlak zal uitlijnen naar de huidige
weergave telkens wanneer een opdracht wordt gestartAutomaticAutomatischOffsetVerschuivingAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveEen optionele verschuiving om aan het werkvlak
bovenop zijn basispositie. Gebruik dit samen met één
van de knoppen hierbovenIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveAls dit is geselecteerd, wordt het werkvlak
gecentreerd op de huidige weergave wanneer op een
van de knoppen hierboven wordt gekliktCenter plane on viewMiddenvlak op zichtCenters the working plane on the current view when pressing one
of the buttons aboveCenters the working plane on the current view when pressing one
of the buttons aboveOr select a single vertex to move the current working plane without changing its orientation. Then press the button below.Of selecteer een individueel hoekpunt om het huidige werkvlak te verplaatsen zonder de oriëntatie aan te passen. Druk dan op de onderstaande knop.Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view.Beweegt het werkvlak zonder de oriëntatie
te veranderen. Als geen punt is geselecteerd, wordt het vlak
verplaatst naar het centrum van de weergave.Move Working PlaneMove Working PlaneThe color of the gridDe kleur van het rasterGrid colorThe distance between grid linesDe afstand tussen de rasterlijnenThe number of squares between major grid linesHet aantal vierkanten tussen de hoofdlijnenMajor lines everyHoofdlijn elk squares vierkantenGrid sizeRastergrootteThe distance at which a point can be snapped toDe afstand waar het punt kan worden vastgekliktCenter ViewCenter ViewResets the working plane to its next positionVerstel het werkvlak naar zijn volgende positieNextVolgendeGrid spacingRasterafstandThe number of squares in the X- and Y-direction of the gridThe number of squares in the X- and Y-direction of the gridSnapping radiusStraal van de magnetische uitlijningCenters the view on the current working planeCentreer de weergave op het huidige werkvlakResets the working plane to its previous positionHerstel het werkvlak naar de vorige positiePreviousVorigeLoad presetVoorinstelling ladenShapeVormAmbient shape colorKleur omgevingsvormEmissive shape colorEmissieve vorm kleurSpecular shape colorSpiegelende vorm kleurShape transparencyVorm transparantieShape shininessVorm glimmendheidOtherAndereLine colorLijnkleurLine widthLijndikte px pxDraw styleTekenstijlSolidVolumemodelDashedGestreeptDottedGestippeldDashDotStreepstipDisplay modeWeergavemodusFlat LinesPlatte lijnWireframeDraadmodelShadedSchaduwFill the values below from a stored style presetVul de onderstaande waardes in vanaf een opgeslagen stijl voorinstellingPoint colorPuntkleurPoint sizePuntgroottePointsPuntenShape colorVorm kleurAnnotationsAantekeningenExtension line lengthLengte van de verlenging-lijnExtension line overshootExtensielijnoverschrijdingText spacingTekstafstandText colorTekst kleurDimensionsDimensiesDotpuntAnnotationAantekeningTextsTekstenLine spacing factorLijn regelafstand factorThe annotation scale multiplier is the inverse of the scale set in the
Annotation scale widget. If the scale is 1:100 the multiplier is 100.De annotatie schaal vermenigvuldiger is de inverse van de schaal instelling van de Annotatie schaal widget. Bij een schaal 1:100 wordt de vermenigvuldiger 100.Start arrow typeStart arrow typeCircleCirkelArrowPijlTickVinkTick-2Schuine streep-2NoneGeenStart arrow sizeStart arrow sizeEnd arrow typeEnd arrow typeEnd arrow sizeEnd arrow sizeThe unit override for dimensions. Leave blank to use the current FreeCAD unit.Overschrijf de dimensie eenheden. Laat open om de huidige FreeCAD eenheid te gebruiken.Dimension line overshootAfmetingslijnoverschrijdingThe distance the dimension line is extended past the extension linesDe afstand waarover de maatlijn verlengd wordt voorbij de verlengingslijnenThe color for texts, dimension texts and label textsDe kleur voor teksten, maat teksten en labelsFont nameFont naamThe font for texts, dimensions and labelsHet lettertype voor teksten, afmetingen en labelsFont sizeLettergrootteThe height for texts, dimension texts and label textsDe hoogte voor teksten, afmetingsteksten en label tekstenThe line spacing for multi-line texts and labels (relative to the font size)De regelafstand voor meerdere regels tekst en labels (ten opzichte van de lettergrootte)Scale multiplierSchaal vermenigvuldigerLine and arrow colorLijn en pijl kleurStyle SettingsStyle SettingsSaves the current style as a presetSaves the current style as a presetShape AppearanceShape AppearanceLines and ArrowsLijnen en pijlenAdds a unit symbol to dimension textsAdds a unit symbol to dimension textsThe length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.De lengte van de hulplijnen. Gebruik 0 voor volle hulplijnen. Een negatieve waarde bepaalt de opening tussen de uiteindes van de hulplijnen en de gemeten punten. Een positieve waarde bepaalt de maximale lengte van de hulplijnen. Wordt enkel gebruikt voor lineaire afmetingen.The length of extension lines above the dimension lineDe lengte van de hulplijnen boven de afmetingslijnThe space between the dimension line and the dimension textDe afstand tussen de afmetingslijn en de afmetingstekstApply the above style to selected object(s)Pas de bovenstaande stijl toe op de geselecteerde object(en)Apply the above style to all annotations (texts, dimensions and labels)Pas de bovenstaande stijl toe op alle annotaties (teksten, afmetingen en labels)Show unitToon eenheidUnit overrideEenheid overschrijvenSelectedGeselecteerdHatchArceringPAT filePAT filePatternPatroonScaleSchalenRotationRotatieAlign to faceAlign to faceAligns the pattern with the base object.
Otherwise, the pattern aligns with the global coordinate system.
This setting modifies the Translate property.Aligns the pattern with the base object.
Otherwise, the pattern aligns with the global coordinate system.
This setting modifies the Translate property.Pattern files (*.pat *.PAT)Patroon bestanden (*.pat *.PAT)Gui::Dialog::DlgSettingsDraftDefault working planeStandaard werkvlakGeneralAlgemeenThe number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.Het aantal decimalen gebruikt voor interne operaties met coördinaten (bijvoorbeeld 3 = 0.001).
Waarden tussen 6 en 8 zijn typisch een goed compromis.The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.Het standaard werkvlak voor nieuwe weergaves. Wanneer ingesteld op "Automatisch", zal het werkvlak automatisch uitlijnen met de huidige weergave bij elk begonnen opdracht. Bovendien wordt het uitgelijnd met vooraf geselecteerde vlakke vlakken, of wanneer punten op vlakke vlakken worden gekozen tijdens opdrachten.XY (Top)XY (Bovenkant)XZ (Front)XZ (voorkant)YZ (Side)YZ (zijkant)If checked, a widget indicating the current working
plane orientation appears when picking pointsToont, wanneer aangevinkt, een widget die de oriëntatie van het huidige werkvlak aanduidt gedurende het kiezen van puntenIf checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.Wanneer aangevinkt bevat de drop-down lijst voor lagen ook groepen. Objecten kunnen dan ook automatisch toegevoegd worden aan groepen.Include groups in layer listInclude groups in layer listIf checked, base objects, instead of created copies, are selected after copyingIf checked, base objects, instead of created copies, are selected after copyingIf checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.If checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.Create Part primitives if possibleCreate Part primitives if possibleIf checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.If checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.Keep face colors during downgrade/upgradeKeep face colors during downgrade/upgradeIf checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.If checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.Keep face names during downgrade/upgradeKeep face names during downgrade/upgradeThis is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.This is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.Edit node pick radiusEdit node pick radiusThe pick radius of edit nodesThe pick radius of edit nodesLabel prefix for clonesLabel prefix for clonesThe default prefix added to the label of new clonesThe default prefix added to the label of new clonesConstruction group labelConstruction group labelThe default label for the construction geometry groupThe default label for the construction geometry groupThe default color for Draft objects in construction modeThe default color for Draft objects in construction modeInternal precision levelInterne precisie-niveauShow working plane orientationShow working plane orientationCommand OptionsCommand OptionsIf checked, instructions are displayed in the Report View when using Draft commandsIf checked, instructions are displayed in the Report View when using Draft commandsShow prompts in the Report ViewShow prompts in the Report ViewIf checked, Length input, instead of the X coordinate, will have the initial focus.
This allows indicating a direction and then type a distance.If checked, Length input, instead of the X coordinate, will have the initial focus.
This allows indicating a direction and then type a distance.Set focus on Length instead of X coordinateStel de focus in op de lengte in plaats van X-coördinaatSelect base objects after copyingSelecteer basisobjecten na het kopiërenMaximum number of editable objectsMaximum number of editable objectsConstructionConstructieConstruction geometry colorKleur van de bouwgeometrieDraft classic styleKlassieke schetsstijlBitsnpieces styleFlardenstijlVisualWeergaveSVG PatternsSVG PatternsSVG pattern sizeSVG pattern sizeThe default size for SVG patterns. A higher value results in a denser pattern.The default size for SVG patterns. A higher value results in a denser pattern.Additional SVG pattern locationAdditional SVG pattern locationAn optional directory with custom SVG files containing
pattern definitions to be added to the standard patternsAn optional directory with custom SVG files containing
pattern definitions to be added to the standard patternsDrawing View Line DefinitionsDrawing View Line DefinitionsDashed line definitionStreepjeslijndefinitieAn SVG linestyle definitionEen SVG-lijnstijldefinitieDashdot line definitionStreepstiplijndefinitieDotted line definitionStippelijndefinitieTexts and dimensionsTeksten en afmetingenFont sizeLettergroottemmmmLines and ArrowsLijnen en pijlenStart arrow typeStart arrow typeThe default symbol displayed at the start of dimension linesThe default symbol displayed at the start of dimension linesNoneGeenStart arrow sizeStart arrow sizeThe default starting arrow sizeThe default starting arrow sizeEnd arrow typeEnd arrow typeThe default symbol displayed at the end of dimension linesThe default symbol displayed at the end of dimension linesEnd arrow sizeEnd arrow sizeThe default ending arrow sizeThe default ending arrow sizeNumber of decimalsAantal decimalenDimension DetailsDimension DetailsExtension line overshootExtensielijnoverschrijdingDimension line overshootAfmetingslijnoverschrijdingThe default annotation scale multiplier. This is the inverse of the scale set
in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100.The default annotation scale multiplier. This is the inverse of the scale set
in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100.TextsTekstenThe default height for texts, dimension texts and label textsThe default height for texts, dimension texts and label textsLine spacing factorLijn regelafstand factorThe default line spacing for multi-line texts and labels (relative to the font size)The default line spacing for multi-line texts and labels (relative to the font size)Scale multiplierSchaal vermenigvuldigerTexts and DimensionsTekst en afmetingenAnnotationsAantekeningenFont nameFont naamThe default font for texts, dimensions and labelsThe default font for texts, dimensions and labelsText colorTekst kleurThe default color for texts, dimension texts and label textsThe default color for texts, dimension texts and label textsIf checked, the dimension line is displayed by defaultIf checked, the dimension line is displayed by defaultShow dimension lineAfmetingslijn weergevenLine widthLijndikteThe default line widthDe standaard lijndikte px pxDotPuntCircleCirkelArrowPijlTickVinkTick-2Schuine streep-2Line and arrow colorLijn en pijl kleurThe default color for lines and arrowsDe standaard kleur voor lijnen en pijlenUnitsEenhedenIf checked, a unit symbol is added to dimension texts by defaultIf checked, a unit symbol is added to dimension texts by defaultShow unitToon eenheidUnit overrideEenheid overschrijvenThe default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.The default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.The default number of decimal places for dimension textsThe default number of decimal places for dimension textsThe optional string inserted between the feet and inches values in dimensionsThe optional string inserted between the feet and inches values in dimensionsThe default distance the dimension line is extended past the extension linesThe default distance the dimension line is extended past the extension linesExtension line lengthLengte van de verlenging-lijnThe default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.The default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.The default length of extension lines above the dimension lineThe default length of extension lines above the dimension lineThe default space between the dimension line and the dimension textThe default space between the dimension line and the dimension textText spacingTekstafstandFeet separatorVoet-scheidingstekenSVGSVGImport styleImport stijlUse default style from Part/PartDesignUse default style from Part/PartDesignUse original SVG styleUse original SVG styleIf checked, no unit conversion will occur.
One unit in the SVG file will be interpreted as one millimeter.If checked, no unit conversion will occur.
One unit in the SVG file will be interpreted as one millimeter.Disable unit scalingDisable unit scalingAdd wires for invalid facesAdd wires for invalid facesMethod for importing SVG object colorsMethod for importing SVG object colorsIf face generation results in a degenerated face,
a raw wire from the original shape is addedIf face generation results in a degenerated face,
a raw wire from the original shape is addedCheck to cut shapes according to the even/odd SVG fill ruleCheck to cut shapes according to the even/odd SVG fill ruleApply CutsApply CutsCoordinate precision (crucial for detecting closed paths)Coordinate precision (crucial for detecting closed paths)The number of decimal places used in internal coordinate operations (for example 3 = 0.001).
The optimal value depends on the absolute size of the import. Typical values are between 1 and 5.The number of decimal places used in internal coordinate operations (for example 3 = 0.001).
The optimal value depends on the absolute size of the import. Typical values are between 1 and 5.Export styleExportstijlStyle of SVG file to write when exporting a sketchStijl van SVG-bestand om te schrijven bij het exporteren van een schetsTranslated (for print & display)Vertaald (voor publicatie en weergave)Raw (for CAM)Ruw (voor CAM)All white lines will appear in black in the SVG for better readability against white backgroundsAlle witte lijnen zullen in de SVG in het zwart verschijnen voor een betere leesbaarheid tegen witte achtergrondenConvert white line color to blackConvert white line color to blackMaximum segment length for discretized arcsMaximum segment length for discretized arcsVersions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.Versions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.OCAOCAImport OptionsImport OptionsImports the areas (3D faces) tooImports the areas (3D faces) tooImport OCA areasOCA gebieden importerenDXFDXFAllow FreeCAD to automatically download and update the DXF librariesSta FreeCAD toe om de DXF-bibliotheken automatisch te downloaden en bij te werkenImportImporterenAll objects containing faces will be exported as 3D polyface meshesAll objects containing faces will be exported as 3D polyface meshesProject exported objects along current view directionProject exported objects along current view directionUse colors from the DXF fileGebruik de kleuren uit het DXF bestandJoin geometryGeometrie koppelenUse standard font size for textsStandaardlettergrootte gebruiken voor tekstenRender polylines with widthRender polylines with widthEllipse export is poorly supported. Use this to export them as polylines instead.Het exporteren van ellipsen wordt slecht ondersteund. Gebruik dit om ze als polylijnen te exporteren.Treat ellipses and splines as polylinesBehandel ellipsen en splines als polylijnenIf checked, this preferences dialog will be shown each time you import or export
a DXF file.If checked, this preferences dialog will be shown each time you import or export
a DXF file.Show the importer dialog when importing a fileShow the importer dialog when importing a fileUse the legacy Python importer. This importer is more feature-complete but slower and requires an external library.Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library.Use legacy importerUse legacy importerUse the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library.Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library.Use legacy exporterUse legacy exporterAutomatic Update (Legacy Only)Automatic Update (Legacy Only)If checked, FreeCAD is allowed to download and update the Python libraries
required by the legacy importer. This can also be done manually by installing
the 'dxf_library' addon from the Addon Manager.If checked, FreeCAD is allowed to download and update the Python libraries
required by the legacy importer. This can also be done manually by installing
the 'dxf_library' addon from the Addon Manager.Import AsImport AsCreates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench. Creates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench. Editable Draft objects (highest fidelity, slowest)Editable Draft objects (highest fidelity, slowest)DxfImportModeDxfImportModeCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing and Part workbench integration.Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing and Part workbench integration.Editable Part primitives (high fidelity, slower)Editable Part primitives (high fidelity, slower)Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Individual Part shapes (balanced, recommended)Individual Part shapes (balanced, recommended)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for importing and viewing very large files with maximum performance.Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for importing and viewing very large files with maximum performance.Fused Part shapes (lowest fidelity, fastest)Fused Part shapes (lowest fidelity, fastest)Import SettingsImport SettingsGlobal scaling factorGlobal scaling factorScale factor to apply to DXF files on import. The factor is the conversion
between the DXF file's unit and millimeters. Example: for files in
millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4,
in feet: 304.8Scale factor to apply to DXF files on import. The factor is the conversion
between the DXF file's unit and millimeters. Example: for files in
millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4,
in feet: 304.8If checked, text, mtext, and dimension entities will be imported as Draft objectsIf checked, text, mtext, and dimension entities will be imported as Draft objectsIf checked, point entities will be importedIf checked, point entities will be importedPointsPuntenIf checked, entities from the paper space will also be imported. By default,
only model space is importedIf checked, entities from the paper space will also be imported. By default,
only model space is importedPaper space objectsPaper space objectsIf checked, anonymous blocks (whose names begin with *) will also be imported.
These are often used for hatches and dimensionsIf checked, anonymous blocks (whose names begin with *) will also be imported.
These are often used for hatches and dimensionsAnonymous blocks (*-blocks)Anonymous blocks (*-blocks)If checked, the boundaries of hatch objects will be imported as closed wires.
(Legacy importer only)If checked, the boundaries of hatch objects will be imported as closed wires.
(Legacy importer only)Hatch boundariesHatch boundariesAppearanceUiterlijkIf checked, colors will be set as specified in the DXF file whenever
possible. Otherwise, default FreeCAD colors are appliedIf checked, colors will be set as specified in the DXF file whenever
possible. Otherwise, default FreeCAD colors are appliedIf checked, imported texts will get the standard Draft text size, instead of
the size defined in the DXF document. (Legacy importer only)If checked, imported texts will get the standard Draft text size, instead of
the size defined in the DXF document. (Legacy importer only)Advanced processingAdvanced processingIf checked, the legacy importer will attempt to join coincident geometric
objects into wires. This can be slow for large files. (Legacy importer only)If checked, the legacy importer will attempt to join coincident geometric
objects into wires. This can be slow for large files. (Legacy importer only)If checked, polylines that have a width property will be rendered as faces
representing that width. (Legacy importer only)If checked, polylines that have a width property will be rendered as faces
representing that width. (Legacy importer only)If checked, the legacy importer will attempt to create Sketcher objects
instead of Draft or Part objects. This overrides the 'Import As' settingIf checked, the legacy importer will attempt to create Sketcher objects
instead of Draft or Part objects. This overrides the 'Import As' settingCreate sketchesCreate sketchesExport OptionsExport OptionsMaximum spline segmentMaximum spline segmentMaximum length of each of the polyline segments. '0' treats the whole spline as a straight segment.Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment.Export 3D objects as polyface meshesExport 3D objects as polyface meshesTechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.TechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.Export TechDraw Views as blocksExport TechDraw Views as blocksExported objects will be projected to reflect the current view directionGeëxporteerde objecten zullen worden geprojecteerd om de huidige weergaverichting weer te gevenShiftShiftAlways snapAlways snapGrid and SnappingGrid and SnappingIf checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if "Show grid border" is enabled.If checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if "Show grid border" is enabled.Major lines everyHoofdlijn elkThe number of squares between major grid lines.
Major grid lines are thicker than minor grid lines.The number of squares between major grid lines.
Major grid lines are thicker than minor grid lines. squares vierkantenSnapping and Modifier KeysSnapping and Modifier KeysSnap modifierThe Snap modifier keyThe Snap modifier keyCtrlCtrlAltAltConstrain modifierConstrain modifierAlt modifierAlt modifierThe Alt modifier key. The function of this key depends on the command.The Alt modifier key. The function of this key depends on the command.If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.The distance between grid linesDe afstand tussen de rasterlijnenThe maximum number of objects Draft Edit is allowed to process at the same timeThe maximum number of objects Draft Edit is allowed to process at the same timeGridRasterAlways show the gridAltijd de raster tonenIf checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.If checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.Show the grid during commandsShow the grid during commandsIf checked, an additional border is displayed around the grid,
showing the main square size in the bottom left cornerIf checked, an additional border is displayed around the grid,
showing the main square size in the bottom left cornerShow grid borderRasterrand weergevenShow human figureToon menselijke figuurIf checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate systemIf checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate systemUse colored axesGebruik gekleurde assenGrid spacingRasterafstandGrid sizeRastergrootteThe number of squares in the X- and Y-direction of the gridThe number of squares in the X- and Y-direction of the gridGrid transparencyGrid transparency % %Grid colorThe constrain modifier keyThe constrain modifier keySnap symbol styleSnap symbol styleMouse delayMouse delay seconds secondenThe style for snap symbolsThe style for snap symbolsSnap symbol colorSnap symbol colorThe color for snap symbolsThe color for snap symbolsIf checked, snapping is activated without the need to press the Snap modifier keyIf checked, snapping is activated without the need to press the Snap modifier keyThe color of the gridDe kleur van het rasterThe overall transparency of the gridDe algehele transparantie van het rasterDWGDWGThis is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.AutomaticAutomatischDWG ConversionDWG ConversionConversion methodConversion methodLibreDWGLibreDWGODA ConverterODA-converterQCAD proQCAD proPath to file converterPad naar bestand converterThe path to your DWG file converter executableHet pad naar uw uitvoerbare DWG-bestand converter<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html><html><head/><body><p><span style=" font-weight:600;">Opmerking:</span> DXF-opties zijn ook van toepassing op de DWG-bestanden.</p></body></html>RelativeRelatiefRRContinueDoorgaanCloseSluitenOOCopyKopieLLInterfaceInterfaceFFSelect edgeSelect edgeSubelement modeSubelement modeBBCCExitAfsluitenAAIncrease radiusIncrease radiusDecrease radiusDecrease radiusEEQQLengthLengteWipeWissenWWUUGlobalOveralIn-Command ShortcutsIn-Command ShortcutsGGMake faceMake faceUndoOngedaan makenNNCycle snapCycle snapAdd holdAdd holdSet working planeSnapVastklikkenSSRestrict XX beperkenXXRestrict YY beperkenYYRestrict ZZ beperkenZZRecenterRecenterDDUI OptionsUI OptionsIf checked, the Draft Snap toolbar will only be visible during commandsIf checked, the Draft Snap toolbar will only be visible during commandsOnly show the Draft Snap toolbar during commandsOnly show the Draft Snap toolbar during commandsIf checked, the Draft Snap Widget is displayed in the Draft Status BarIf checked, the Draft Snap Widget is displayed in the Draft Status BarShow the Draft Snap Widget in the Draft WorkbenchShow the Draft Snap Widget in the Draft WorkbenchIf checked, the Draft Scale Widget is displayed in the Draft Status BarIf checked, the Draft Scale Widget is displayed in the Draft Status BarShow the Draft Scale Widget in the Draft WorkbenchShow the Draft Scale Widget in the Draft WorkbenchdraftRelativeRelatiefGlobalOveralContinueDoorgaanIf checked, the command will not finish until pressing the command button againIf checked, the command will not finish until pressing the command button againIf checked, the next dimension will be placed in a chain with the previously placed DimensionIf checked, the next dimension will be placed in a chain with the previously placed DimensionCloseSluitenSet Working PlaneWerkvlak instellenSelect EdgeSelect EdgeCopyKopieWipeWissenAll shapes must be coplanarAll shapes must be coplanarSelected shapes must define a planeSelected shapes must define a planeTopBovenFrontVoorkantSideZijdeAutoAutomatischCurrent working plane: AutoCurrent working plane: AutoCurrent working plane:Current working plane:Selected shapes do not define a planeSelected shapes do not define a planeNo previous working planeNo previous working planeNo next working planeNo next working planeAxes:Assen:Position:Positie:NoneGeenactive command:actief commando:Active Draft commandActive Draft commandX coordinate of the pointX coordinate of the pointXXYYZZLengthLengteAngleHoekRadiusRadiusCreates the text object and finishes the commandCreates the text object and finishes the commandChanges the default style for new objectsChanges the default style for new objectsToggles construction modeToggles construction modeLabel TypeLabel TypeRadius of CircleStraal van de cirkelCoordinates relative to last point or to coordinate system origin
if is the first point to setCoordinates relative to last point or to coordinate system origin
if is the first point to setY coordinate of the pointY coordinate of the pointZ coordinate of the pointZ coordinate of the pointEnter PointEnter PointLength of the current segmentLength of the current segmentAngle of the current segmentAngle of the current segmentLocks the current angleLocks the current angleRadius of the circleRadius of the circleCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemFinishVoltooienFinishes the current drawing or editing operationFinishes the current drawing or editing operationModify ObjectsModify ObjectsFacebinder ElementsFacebinder ElementsIf checked, an OCC-style offset will be performed instead of the classic offsetIf checked, an OCC-style offset will be performed instead of the classic offsetOCC-style offsetOCC-style offsetUndoOngedaan makenIf checked, objects will be copied instead of movedIf checked, objects will be copied instead of movedUndo the last segmentUndo the last segmentEnter a point with given coordinatesEnter a point with given coordinatesMake faceMake faceIf checked, the object will be filled with a face.
Not available if the 'Use Part Primitives' preference is enabledIf checked, the object will be filled with a face.
Not available if the 'Use Part Primitives' preference is enabledChained modeChained modeFinishes and closes the current lineFinishes and closes the current lineWipes the existing segments of this line and starts again from the last pointWipes the existing segments of this line and starts again from the last pointReorients the working plane on the last segmentReorients the working plane on the last segmentSelects an existing edge to be measured by this dimensionSelects an existing edge to be measured by this dimensionSidesZijdenNumber of sidesAantal zijdenModify subelementsSubelementen wijzigenIf checked, subelements will be modified instead of entire objectsIf checked, subelements will be modified instead of entire objectsAutogroup offAutogroup offLineLijnDWireDWireCircleCirkelArcBoogRotateDraaienPointPuntLabelLabelOffsetVerschuivingDistanceAfstandOffset distanceOffset distanceTrimexTrimexLocal {}Lokaal {}Global {}Globaal {}Autogroup:Autogroup:FacesVlakkenRemoveVerwijderenAddToevoegenDraftKantelConverting:Converteren:Conversion successfulConversion successfulLibreDWG converter not foundLibreDWG converter not foundODA converter not foundODA converter not foundQCAD converter not foundQCAD converter not foundNo suitable external DWG converter has been found.
Please set one manually under menu Edit → Preferences → Import/Export → DWG
For more information see:
https://wiki.freecad.org/Import_Export_PreferencesNo suitable external DWG converter has been found.
Please set one manually under menu Edit → Preferences → Import/Export → DWG
For more information see:
https://wiki.freecad.org/Import_Export_PreferencesError during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.Fout tijdens DWG-conversie. Probeer het DWG-bestand te verplaatsen naar een map zonder spaties en niet-dubieuze tekens of probeer op te slaan in een lagere DWG-versie.CustomEigenUnable to convert input into a scale factorUnable to convert input into a scale factorSet Custom ScaleSet Custom ScaleDraft Scale WidgetA context menu action used to show or hide this toolbar widgetDraft Scale WidgetSet the scale used by Draft annotation toolsSet the scale used by Draft annotation toolsDraft Snap WidgetA context menu action used to show or hide this toolbar widgetDraft Snap WidgetSet custom annotation scale in format x:x, x=xSet custom annotation scale in format x:x, x=xNo active document. Aborting.No active document. Aborting.Wrong input: object {} not in document.Wrong input: object {} not in document.Unable to insert new object into a scaled partUnable to insert new object into a scaled partSymbol not implemented. Using a default symbol.Symbol not implemented. Using a default symbol.image is Nullimage is Nullfilename does not exist on the system or in the resource filefilename does not exist on the system or in the resource fileunable to load textureunable to load textureDoes not have 'ViewObject.RootNode'.Does not have 'ViewObject.RootNode'.Solids:Solids:Faces:Vlakken:Wires:Wires:Edges:Randen:Vertices:Vertices:FaceVlakWirePolygonale lijndifferent typesverschillende typesObjects have different placements. Distance between the two base points:Objects have different placements. Distance between the two base points:%s cannot be modified because its placement is readonly%s cannot be modified because its placement is readonlyThis function will be deprecated in {}. Please use '{}'.This function will be deprecated in {}. Please use '{}'.This function will be deprecated. Please use '{}'.This function will be deprecated. Please use '{}'.has a different valueheeft een andere waardedoesn't exist in one of the objectsbestaat niet in een van de objecten%s shares a base with %d other objects. Please check if you want to modify this.%s shares a base with %d other objects. Please check if you want to modify this.Wrong input: unknown document {}Wrong input: unknown document {}Pick target pointPick target pointCreate LabelLabel makenPick endpoint of leader lineKies het eindpunt van de leiderslijnPick text positionKies tekstpositiePick first pointKies het eerste puntEdges do not intersect!Edges do not intersect!Create LineMaak Nieuwe LijnCreate WireDraad aanmaken%1 pick next point, snap to first point to close%1 pick next point, snap to first point to close%1 pick next point%1 pick next pointUnable to create a wire from the selected objectsUnable to create a wire from the selected objectsPolylinePolygonale lijnPick next pointKies het volgende puntConvert to WireConvert to WireSelect an object to joinSelecteer een object om samen te voegenJoin LinesJoin LinesOnly Draft lines and wires can be joinedOnly Draft lines and wires can be joinedSelection:Selectie:Pick location pointKies locatiepuntCreate TextTekst makenSelect an object to convertSelecteer een object om te converterenConvert to SketchConverteren naar schetsConvert to DraftConverteren naar ontwerpConvert Draft/SketchConvert Draft/SketchSelect an object to moveSelecteer een object om te verplaatsenPick start pointKies startpuntPick end pointKies eindpuntNo valid subelements selectedNo valid subelements selectedMoveVerplaatsenPick center pointKies middelpuntPick radiusKies straalStart angleStarthoekPick start angleKies starthoekAperture angleAperture anglePick aperturePick aperture%1 constrain%1 constrain%1 snap%1 snap%1/%2/%3 switch constraint%1/%2/%3 switch constraint%1 toggle relative%1 toggle relative%1 toggle global%1 toggle global%1 toggle continue%1 toggle continue%1 pick center%1 pick center%1 pick radius%1 pick radius%1 pick aperture%1 pick apertureCreate Circle (Part)Maak cirkel (Onderdeel)Create CircleMaak CirkelCreate Arc (Part)Create Arc (Part)Create ArcCreate ArcPick aperture anglePick aperture angle%1 pick start angle%1 pick start angleArc From 3 PointsArc From 3 PointsCreate Arc From 3 PointsCreate Arc From 3 Points%1 pick first point%1 pick first point%1 pick second point%1 pick second point%1 pick third point%1 pick third pointSelect an object to editSelect an object to editSelect a Draft object to editSelect a Draft object to editEdit NodeEdit NodeToo many objects selected, maximum number set to:Too many objects selected, maximum number set to:No edit point found for selected objectNo edit point found for selected object: this object is not editable: this object is not editableAnnotation Style EditorAnnotation Style EditorNew StyleNew StyleStyle nameStijl naamStyle name requiredStijlnaam vereistNo style name specifiedGeen stijlnaam opgegevenStyle existsStijl bestaatThis style name already existsDeze stijlnaam bestaat alStyle in useStijl in gebruikThis style is used by some objects in this document. Proceed?This style is used by some objects in this document. Proceed?Rename StyleRename StyleNew nameNew nameOpen Styles FileOpen Styles FileJSON files (*.json *.JSON)JSON files (*.json *.JSON)Save Styles FileSave Styles FileJSON file (*.json)JSON-bestand (*.json)Select an object to projectSelect an object to projectCreate 2D ViewCreate 2D ViewCreate PointPunt aanmaken%1 pick point%1 pick pointSelect an object to rotateSelecteer een object om te draaienPick rotation centerKies rotatiemiddelpuntBase angleBase angleThe base angle to start the rotation fromThe base angle to start the rotation fromThe amount of rotation to perform.
The final angle will be the base angle plus this amount.The amount of rotation to perform.
The final angle will be the base angle plus this amount.Pick base anglePick base angleRotationRotatiePick rotation anglePick rotation angleAdd to New GroupAdd to New GroupAdd to GroupAdd to GroupNo new selection. Select non-empty groups or objects inside groups.No new selection. Select non-empty groups or objects inside groups.New LayerNieuwe LaagLayer nameLayer nameLayerObject labelLaagNew layerNieuwe laagAdd to Construction GroupAdd to Construction GroupNew GroupNew GroupGroup nameGroup nameGroupObject labelGroepNew named groupNew named groupUngroupUngroupGroupGroepFillet radiusAfrondingsstraalRadius of the filletRadius of the filletEnter radiusEnter radiusCreate FilletCreate FilletFillet cannot be createdAfronding kan niet worden gemaaktPolygonVeelhoekCreate Polygon (Part)Create Polygon (Part)Create PolygonPolygoon makenSelect objects to trim or extendSelect objects to trim or extendThis object is not supportedThis object is not supportedOnly a single face can be extrudedOnly a single face can be extrudedTrimex does not support this object typeTrimex does not support this object typeUnable to trim these objects, only Draft wires and arcs are supportedUnable to trim these objects, only Draft wires and arcs are supportedThese objects do not intersectThese objects do not intersectToo many intersection pointsToo many intersection pointsOffset only works on one object at a timeOffset only works on one object at a timeOffset of Bézier curves is currently not supportedOffset of Bézier curves is currently not supportedPick distanceKies afstandOffset angleOffset angleUnable to trim these objects, too many wiresUnable to trim these objects, too many wiresB-SplineB-SplineCreate B-SplineCreate B-SplineChange StyleStijl wijzigenThis object does not support possible coincident pointsThis object does not support possible coincident pointsDelete PointDelete PointAdd PointAdd PointOpen WireOpen WireClose WireClose WireReverse WireReverse WireActive object must have more than 2 points or nodesActive object must have more than 2 points or nodesOpen SplineOpen SplineClose SplineClose SplineReverse SplineReverse SplineMove ArcMove ArcSet First AngleSet First AngleSet Last AngleSet Last AngleSet RadiusSet RadiusInvert ArcInvert ArcMake SharpMake SharpMake TangentMake TangentMake SymmetricMake SymmetricReverse CurveReverse CurveOpen CurveOpen CurveClose CurveClose CurveSelection is not a knotSelection is not a knotEndpoint of Bézier curve cannot be smoothedEndpoint of Bézier curve cannot be smoothedActive object must have more than two points/nodesActive object must have more than two points/nodesBézier CurveBézier CurveCreate Bézier CurveCreate Bézier CurveCubic Bézier CurveCubic Bézier CurveClick and drag to define next knotClick and drag to define next knot%1 click and drag to define first point and knot%1 click and drag to define first point and knot%1 click and drag to define next point and knot%1 click and drag to define next point and knotEllipseEllipsCreate EllipseEllips aanmakenPick opposite pointKies een tegenovergesteld punt%1 pick opposite point%1 pick opposite pointSelect faces from existing objectsSelect faces from existing objectsSelect an object to scaleSelecteer een object om te schalenPick base pointKies basispuntPick reference distance from base pointKies een referentieafstand vanaf het basispuntZero scale factor not allowedZero scale factor not allowedScaleSchalenPick new distance from base pointPick new distance from base pointLayerLaagCreate DimensionDimensie makenEdge too short!Edge too short!Select an object to stretchSelect an object to stretchPick first point of selection rectanglePick first point of selection rectanglePick the opposite point of the selection rectanglePick the opposite point of the selection rectangleTurning a rectangle into a wireTurning a rectangle into a wirePick start point of displacementKies het startpunt van verplaatsingPick end point of displacementKies het eindpunt van verplaatsingStretchStretchRectangleRechthoekCreate PlaneCreate PlaneCreate RectangleRechthoek makenSelect an object to mirrorSelecteer een object om te spiegelenPick start point of mirror lineKies het beginpunt van de spiegellijnMirrorSpiegelenPick end point of mirror lineKies het eindpunt van de spiegellijnSelect an object to cloneSelecteer een object om te klonenCannot clone objects without a shape, abortingCannot clone objects without a shape, abortingCannot clone objects without a shape, skipping themCannot clone objects without a shape, skipping themSelect an object to upgradeSelecteer een object om te upgradenUpgradeUpgradenSelect an object to offsetSelect an object to offsetCannot offset this object typeCannot offset this object typePick ShapeString location pointPick ShapeString location pointCreate ShapeStringCreate ShapeStringHealHealDowngradeDowngradenObject:Object:Polar ArrayPolar ArrayNumber of elements must be at least 2Number of elements must be at least 2The angle is above 360 degrees. It is set to this value to proceed.The angle is above 360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.Create Polar ArrayCreate Polar ArrayFuse:Samenvoegen:Create Link array:Create Link array:Number of elements:Aantal elementen:Polar angle:Polar angle:Center of rotation:Center of rotation:Orthogonal ArrayOrthogonal ArrayNumber of elements must be at least 1Number of elements must be at least 1In linear mode, at least 1 axis must be selectedIn linear mode, at least 1 axis must be selectedCreate Orthogonal ArrayCreate Orthogonal ArrayCreate link array:Create link array:Number of X elements:Aantal X-elementen:Interval X:X-interval:Number of Y elements:Aantal Y-elementen:Interval Y:Y-interval:Number of Z elements:Aantal Z-elementen:Interval Z:Z-interval:Switch to Ortho ModeSwitch to Ortho ModeX-AxisX-AsY-AxisY-AsZ-AxisZ-AsSwitch to Linear ModeSwitch to Linear ModeNumber of elementsAantal elementenIntervalIntervalShapeStringTekenreeksvormDefaultStandaardRadial distance is zero. Resulting array may not look correct.Radial distance is zero. Resulting array may not look correct.Radial distance is negative. It is made positive to proceed.Radial distance is negative. It is made positive to proceed.Circular ArrayCircular ArrayAt least 1 element must be selectedAt least 1 element must be selectedNumber of layers must be at least 2Number of layers must be at least 2Selection is not suitable for arraySelection is not suitable for arrayTangential distance cannot be 0Tangential distance cannot be 0Tangential distance is negative. It is made positive to proceed.Tangential distance is negative. It is made positive to proceed.Create Circular ArrayCreate Circular ArrayRadial distance:Radial distance:Tangential distance:Tangential distance:Number of concentric circles:Number of concentric circles:Symmetry parameter:Symmetry parameter:Font file not foundFont file not foundSpecified font file is not a fileSpecified font file is not a fileSpecified font type is not supportedSpecified font type is not supportedShapeString: oblique angle must be in the -80 to +80 degree rangeShapeString: oblique angle must be in the -80 to +80 degree rangeShapeString: string has no wiresShapeString: string has no wiresShapeString: face creation failed for one characterShapeString: face creation failed for one character, path object does not have 'Edges'., path object does not have 'Edges'.Start Offset too large for path length. Using 0 instead.Start Offset too large for path length. Using 0 instead.End Offset too large for path length minus Start Offset. Using 0 instead.End Offset too large for path length minus Start Offset. Using 0 instead.Length of tangent vector is 0. Copy not aligned.Length of tangent vector is 0. Copy not aligned.Length of normal vector is 0. Using a default axis instead.Length of normal vector is 0. Using a default axis instead.Spacing unit of 0 is not allowed, using defaultSpacing unit of 0 is not allowed, using defaultOperation would generate too many objects. AbortingOperation would generate too many objects. AbortingTangent and normal vectors are parallel. Normal replaced by a default axis.Tangent and normal vectors are parallel. Normal replaced by a default axis.Cannot calculate normal vector. Using the default normal instead.Cannot calculate normal vector. Using the default normal instead.AlignMode {} is not implementedAlignMode {} is not implementedNo shape foundNo shape foundAll shapes must be planarAll shapes must be planarPoints:Punten:Wrong input: must be a list or tuple of 3 points exactly.Wrong input: must be a list or tuple of 3 points exactly.Wrong input: must be list or tuple of 3 points exactly.Wrong input: must be list or tuple of 3 points exactly.Placement:Placement:Wrong input: incorrect type of placement.Wrong input: incorrect type of placement.Wrong input: incorrect type of points.Wrong input: incorrect type of points.Cannot generate shape:Kan geen vorm genereren:Wrong input: base_object not in document.Wrong input: base_object not in document.Wrong input: path_object not in document.Wrong input: path_object not in document.Wrong input: must be a number.Verkeerde invoer: moet een getal zijn.Wrong input: must be a vector.Wrong input: must be a vector.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be a number or vector.Wrong input: must be a number or vector.Input: single value expanded to vector.Input: single value expanded to vector.Wrong input: must be an integer number.Wrong input: must be an integer number.Input: number of elements must be at least 1. It is set to 1.Invoer: aantal elementen moet minimaal 1 zijn. Het staat ingesteld op 1.Wrong input: must be a placement, a vector, or a rotation.Wrong input: must be a placement, a vector, or a rotation.Wrong input: target_object must not be a list.Wrong input: target_object must not be a list.Wrong input: target_object not in document.Wrong input: target_object not in document.Wrong input: subelements must be a list or tuple of strings, or a single string.Wrong input: subelements must be a list or tuple of strings, or a single string.Wrong input: subelement {} not in object.Wrong input: subelement {} not in object.Wrong input: label_type must be a string.Verkeerde invoer: label_type moet een tekenreeks zijn.Wrong input: label_type must be one of the following:Wrong input: label_type must be one of the following:Wrong input: must be a list of strings or a single string.Verkeerde invoer: moet een lijst van tekenreeksen of een enkele tekenreeks zijn.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: points {} must be a list of at least two vectors.Wrong input: points {} must be a list of at least two vectors.Direction is not 'Custom'; points won't be used.Richting is niet 'Aangepast'; punten worden niet gebruikt.Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: point_object not in document.Wrong input: point_object not in document.Wrong input: object has the wrong type.Wrong input: object has the wrong type.This function is deprecated. Do not use this function directly.This function is deprecated. Do not use this function directly.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Wrong input: edge_object must not be a list or tuple.Wrong input: edge_object must not be a list or tuple.Wrong input: edge_object not in document.Wrong input: edge_object not in document.Wrong input: object doesn't have a 'Shape' to measure.Verkeerde invoer: object heeft geen 'Vorm' om te meten.Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring.Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring.Wrong input: must be an integer.Verkeerde invoer: moet een geheel getal zijn.i1: values below 1 are not allowed; will be set to 1.i1: values below 1 are not allowed; will be set to 1.Wrong input: vertex not in object.Wrong input: vertex not in object.i2: values below 1 are not allowed; will be set to the last vertex in the object.i2: values below 1 are not allowed; will be set to the last vertex in the object.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.index: values below 1 are not allowed; will be set to 1.index: values below 1 are not allowed; will be set to 1.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to a circular edge.Wrong input: index doesn't correspond to a circular edge.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a list with two angles.Wrong input: must be a list with two angles.Wrong input: must be a number or quantity.Wrong input: must be a number or quantity.LayersLagenWrong input: it must be a string.Verkeerde invoer: het moet een tekenreeks zijn.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be a number between 0 and 100.Verkeerde invoer: moet een getal tussen 0 en 100 zijn.EditBewerkenFlattenVlak makenUpgrade: Unknown force method:Upgrade: Unknown force method:Found 1 block: exploding itFound 1 block: exploding itFound 1 multi-solids compound: exploding itFound 1 multi-solids compound: exploding itFound 1 parametric object: breaking its dependenciesFound 1 parametric object: breaking its dependenciesDowngrade: Unknown force method:Downgrade: Unknown force method:Found 1 array: exploding itFound 1 array: exploding itFound 2 objects: subtracting themFound 2 objects: subtracting themFound several faces: splitting themFound several faces: splitting themFound several faces: subtracting them from the first oneFound several faces: subtracting them from the first oneUnable to downgrade these objectsUnable to downgrade these objectsFound 1 face: extracting its wiresFound 1 face: extracting its wiresFound only wires: extracting their edgesFound only wires: extracting their edgesNo object givenGeen object gegevenThe two points are coincidentDe twee punten vallen samenmirroredgespiegeldFound 1 solidifiable object: solidifying itFound 1 solidifiable object: solidifying itFound 2 objects: fusing them2 objecten gevonden: ze samenvoegenFound groups: closing open wires insideFound groups: closing open wires insideFound meshes: turning them into Part shapesFound meshes: turning them into Part shapesFound object with several coplanar faces: refining themFound object with several coplanar faces: refining themFound 1 closed sketch object: creating a face from itFound 1 closed sketch object: creating a face from itFound closed wires: creating facesFound closed wires: creating facesFound several wires or edges: wiring themFound several wires or edges: wiring themFound several non-treatable objects: creating compoundFound several non-treatable objects: creating compoundUnable to upgrade these objectsUnable to upgrade these objectsFound 1 open wire: closing itFound 1 open wire: closing itFound 1 non-parametric object: replacing it with a Draft objectFound 1 non-parametric object: replacing it with a Draft objectFound points: creating compoundFound points: creating compoundTextTekstNo TargetNo TargetInvalid label typeOngeldig labeltypeTag not available for objectTag not available for objectMaterial not available for objectMateriaal niet beschikbaar voor objectPosition not available for (sub)objectPositie niet beschikbaar voor (sub)objectLength not available for (sub)objectLengte niet beschikbaar voor (sub)objectArea not available for (sub)objectGebied niet beschikbaar voor (sub)objectVolume not available for (sub)objectVolume niet beschikbaar voor (sub)objectOpening Multiple LinksOpening Multiple LinksMultiple links foundMultiple links foundThis may lead to the opening of various windowsDit kan leiden tot het openen van verschillende venstersFile not found:Bestand niet gevonden:Opening hyperlinkHyperlink openenSelect 3 vertices, one or more shapes or an object to define a working planeSelect 3 vertices, one or more shapes or an object to define a working planeDo you want to update the SVG pattern options
of existing objects in all opened documents?Do you want to update the SVG pattern options
of existing objects in all opened documents?Sketch is too complex to edit: it is suggested to use the default Sketcher editorSketch is too complex to edit: it is suggested to use the default Sketcher editorCreate layerCreate layerRemove From LayerRemove From LayerAdd to New LayerAdd to New LayerRemove from layerRemove from layerAdd to new layerAdd to new layerAdd to layerAdd to layerLayers changeLayers changeFlip DimensionFlip DimensionToggle GridToggle GridChange SlopeChange SlopeSelect exactly 2 objects, the base object and the path object, before calling this commandSelect exactly 2 objects, the base object and the path object, before calling this commandCreate Path ArrayCreate Path ArrayCreate Path Twisted ArrayCreate Path Twisted ArraySelect exactly 2 objects, the base object and the point object, before calling this commandSelect exactly 2 objects, the base object and the point object, before calling this commandCreate Point ArrayCreate Point ArrayClick anywhere on a line to split itClick anywhere on a line to split itSplit LineSplit LineNo active Draft toolbarNo active Draft toolbarConstruction ModeConstruction ModeToggle Display ModeToggle Display Mode2 edges are needed2 edges are neededEdges are not connected or radius is too largeEdges are not connected or radius is too largeUnable to build facebinderUnable to build facebinderNo valid faces for facebinderNo valid faces for facebinderUnable to build facebinder, resuming with sew disabledUnable to build facebinder, resuming with sew disabledConverting flat B-spline faces of facebinder to planar faces failedConverting flat B-spline faces of facebinder to planar faces failedActivate LayerActivate LayerReassign Properties of LayerReassign Properties of LayerSelect Layer ContentsSelect Layer ContentsAdd New LayerAdd New LayerReassign Properties of All LayersReassign Properties of All LayersMerge Layer DuplicatesMerge Layer DuplicatesThe DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either allow FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either allow FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.PAT file not foundPAT file not foundSpecified PAT file is not a fileSpecified PAT file is not a fileSpecified file type is not supportedSpecified file type is not supportedPattern not found in PAT filePattern not found in PAT fileWorkbenchDraft CreationDraft CreationDraft AnnotationDraft AnnotationDraft ModificationDraft ModificationDraft UtilityDraft UtilityDraft SnapDraft Snap&Drafting&Drafting&AnnotationAantekening &Modification&Modification&Utilities&UtilitiesArc ToolsArc ToolsBézier ToolsBézier ToolsArray ToolsArray ToolsDraftFilletAfrondingDelete original objectsOriginele objecten verwijderenCreate chamferCreate chamferSave styleStijl opslaanName of this new styleName of this new styleWarningWaarschuwingName exists. Overwrite?Naam bestaat al. Overschrijven?Error: json module not found. Unable to load styleError: json module not found. Unable to load styleError: json module not found. Unable to save styleError: json module not found. Unable to save styleSlopeHellingTrueWaarFalseOnwaarScaleSchalenX-factorX-factorY-factorY-factorZ-factorZ-factorUniform scalingUniforme schaalverdelingCopyKopieModify subelementsSubelementen wijzigenPick From/To PointsPick From/To PointsEdit ScaleEdit ScaleCreate a cloneEen kloon maken_BSpline.createGeometry: Closed with same first/last Point. Geometry not updated._BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.Writing camera positionWriting camera positionWriting objects shown/hidden stateWriting objects shown/hidden stateOnAanNameNaamLine WidthLine WidthDraw StyleDraw StyleLine ColorLijnkleurFace ColorFace ColorLine Print ColorLine Print ColorTransparencyTransparantieNew LayerNieuwe LaagCustomEigenLabelLabelPositionPositieLengthLengteAreaOppervlakteVolumeVolumeTagTagMaterialMateriaalLabel + PositionLabel + positieLabel + LengthLabel + lengteLabel + AreaLabel + gebiedLabel + VolumeLabel + volumeLabel + MaterialLabel + materiaalCreate CloneMaak een kloonChoose a base object before using this commandChoose a base object before using this commandOffset direction is not defined. Move the mouse on either side of the object first to indicate a direction.Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction.Point object does not have a discrete point, it cannot be used for an arrayPoint object does not have a discrete point, it cannot be used for an arrayDownload of DXF libraries failed.
Please install the DXF Library addon manually
from menu Tools → Addon ManagerDownload of DXF libraries failed.
Please install the DXF Library addon manually
from menu Tools → Addon ManagerimportOCAOCA: found no data to exportOCA: found no data to exportsuccessfully exportedsuccesvol geëxporteerdImportAirfoilDATDid not find enough coordinatesEr zijn niet genoeg coördinaten gevondenImportSVGUnknown SVG export style, switching to TranslatedUnknown SVG export style, switching to TranslatedThe export list contains no object with a valid bounding boxThe export list contains no object with a valid bounding boxDraft_LabelLabelLabelCreates a label, optionally attached to a selected object or subelementCreates a label, optionally attached to a selected object or subelementDraft_LineLineLijnCreates a 2-point lineCreates a 2-point lineDraft_WirePolylinePolygonale lijnCreates a polylineCreates a polylineDraft_HatchHatchArceringCreates hatches on the faces of a selected objectCreates hatches on the faces of a selected objectDraft_JoinJoinSamenvoegenJoins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end.Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end.Draft_TextTextTekstCreates a multi-line annotationCreates a multi-line annotationDraft_MoveMoveVerplaatsenMoves the selected objects.
If the "Copy" option is active, it creates displaced copies.Moves the selected objects.
If the "Copy" option is active, it creates displaced copies.Draft_ArcArcBoogCreates a circular arc from a center point and a radiusCreates a circular arc from a center point and a radiusDraft_EditEditBewerkenEdits the active objectEdits the active objectDraft_PointPointPuntCreates a pointCreates a pointDraft_RotateRotateDraaienRotates the selected objects.
If the "Copy" option is active, it will create rotated copies.Rotates the selected objects.
If the "Copy" option is active, it will create rotated copies.Draft_FilletFilletAfrondingCreates a fillet between 2 selected edgesCreates a fillet between 2 selected edgesDraft_PolygonPolygonVeelhoekCreates a regular polygon (triangle, square, pentagon…)Creates a regular polygon (triangle, square, pentagon…)Draft_SplitSplitDelenSplits the selected line or polyline at a specified pointSplits the selected line or polyline at a specified pointDraft_TrimexTrimexTrimexTrims or extends the selected object, or extrudes single facesTrims or extends the selected object, or extrudes single facesDraft_CircleCircleCirkelCreates a circle (full circular arc)Creates a circle (full circular arc)Draft_EllipseEllipseEllipsCreates an ellipseCreates an ellipseDraft_FacebinderFacebinderVlakenbinderCreates a facebinder from the selected facesCreates a facebinder from the selected facesDraft_OrthoArrayArrayArrayCreates copies of the selected object in an orthogonal patternCreates copies of the selected object in an orthogonal patternDraft_ScaleScaleSchalenScales the selected objects from a base pointScales the selected objects from a base pointDraft_LayerNew LayerNieuwe LaagAdds a layer to the document.
Objects added to this layer can share the same visual properties.Adds a layer to the document.
Objects added to this layer can share the same visual properties.Draft_DimensionDimensionAfmetingCreates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edgesCreates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edgesDraft_StretchStretchStretchStretches the selected objectsStretches the selected objectsDraft_RectangleRectangleRechthoekCreates a 2-point rectangleCreates a 2-point rectangleDraft_MirrorMirrorSpiegelenMirrors the selected objects along a line defined by 2 pointsMirrors the selected objects along a line defined by 2 pointsDraft_CloneCloneKopieerCreates a clone of the selected objectsCreates a clone of the selected objectsDraft_UpgradeUpgradeUpgradenUpgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Draft_OffsetOffsetVerschuivingOffsets the selected object.
It can also create an offset copy of the original object.Offsets the selected object.
It can also create an offset copy of the original object.Draft_HealHealHealHeals faulty Draft objects saved with an earlier version of FreeCAD.
If an object is selected it tries to heal only that object,
otherwise it tries to heal all objects in the active document.Heals faulty Draft objects saved with an earlier version of FreeCAD.
If an object is selected it tries to heal only that object,
otherwise it tries to heal all objects in the active document.Draft_DowngradeDowngradeDowngradenDowngrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be downgraded several times in a row.
For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted.Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be downgraded several times in a row.
For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted.App::PropertyThe placement of the base point of the first lineThe placement of the base point of the first lineThe text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.Text stringTekstreeksFont file nameFont file nameHeight of textTeksthoogteHorizontal and vertical alignmentHorizontale en verticale uitlijningHeight reference used for justificationHoogte-referentie gebruikt voor uitlijningKeep left margin and leading white space when justification is leftBehoud linker marge en eerste witte ruimte bij linker uitlijningScale to ensure cap height is equal to sizeScale to ensure cap height is equal to sizeInter-character spacingInter-character spacingOblique (slant) angleOblique (slant) angleFill letters with facesFill letters with facesFuse faces if faces overlap, usually not required (can be very slow)Fuse faces if faces overlap, usually not required (can be very slow)The base object used by this objectThe base object used by this objectThe PAT file used by this objectThe PAT file used by this objectThe pattern name used by this objectThe pattern name used by this objectThe pattern scale used by this objectThe pattern scale used by this objectThe pattern rotation used by this objectThe pattern rotation used by this objectIf set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)The objects included in this cloneThe objects included in this cloneThe scale factor of this cloneThe scale factor of this cloneIf Clones includes several objects,
set True for fusion or False for compoundIf Clones includes several objects,
set True for fusion or False for compoundAlways create a compoundAlways create a compoundStart angle of the arcStart angle of the arcEnd angle of the arc (for a full circle,
give it same value as First Angle)End angle of the arc (for a full circle,
give it same value as First Angle)Radius of the circleRadius of the circleCreate a faceCreate a faceThe area of this objectThe area of this objectThe objects that are part of this layerThe objects that are part of this layerNumber of facesNumber of facesRadius of the control circleRadius of the control circleHow the polygon must be drawn from the control circleHow the polygon must be drawn from the control circleRadius to use to fillet the cornersRadius to use to fillet the cornersSize of the chamfer to give to the cornersSize of the chamfer to give to the cornersThe base object that will be duplicated.The base object that will be duplicated.The object along which the copies will be distributed. It must contain 'Edges'.The object along which the copies will be distributed. It must contain 'Edges'.Number of copies to create.Aantal te maken kopieën.Rotation factor of the twisted array.Rotation factor of the twisted array.Show the individual array elements (only for Link arrays)Show the individual array elements (only for Link arrays)The placement for each array elementThe placement for each array elementThe position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The placement of the 'Text' element in 3D spaceThe placement of the 'Text' element in 3D spaceThe text to display when 'Label Type' is set to 'Custom'The text to display when 'Label Type' is set to 'Custom'The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like BIM objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like BIM objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.The base object that will be duplicatedThe base object that will be duplicatedList of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment modeForce use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment modeNumber of copies to createNumber of copies to createAdditional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Alignment vector for 'Tangent' modeAlignment vector for 'Tangent' modeDirection of the local Z axis when 'Force Vertical' is trueDirection of the local Z axis when 'Force Vertical' is trueMethod to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Method to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Walk the path backwards.Walk the path backwards.How copies are spaced.
- Fixed count: available path length (minus start and end offsets) is evenly divided into n.
- Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path.
- Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies.How copies are spaced.
- Fixed count: available path length (minus start and end offsets) is evenly divided into n.
- Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path.
- Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies.Base fixed distance between elements.Base fixed distance between elements.Use repeating spacing patterns instead of uniform spacing.Use repeating spacing patterns instead of uniform spacing.Spacing is multiplied by a corresponding number in this sequence.Spacing is multiplied by a corresponding number in this sequence.Length from the start of the path to the first copy.Length from the start of the path to the first copy.Length from the end of the path to the last copy.Length from the end of the path to the last copy.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circles around the base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circles around the base object.Specifies if the copies should be fused together if they touch each other (slower)Specifies if the copies should be fused together if they touch each other (slower)Number of copies in X-directionNumber of copies in X-directionNumber of copies in Y-directionNumber of copies in Y-directionNumber of copies in Z-directionNumber of copies in Z-directionDistance and orientation of intervals in X-directionDistance and orientation of intervals in X-directionDistance and orientation of intervals in Y-directionDistance and orientation of intervals in Y-directionDistance and orientation of intervals in Z-directionDistance and orientation of intervals in Z-directionThe axis direction around which the elements in a polar or a circular array will be createdThe axis direction around which the elements in a polar or a circular array will be createdCenter point for polar and circular arrays.
The 'Axis' passes through this point.Center point for polar and circular arrays.
The 'Axis' passes through this point.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.Number of copies in the polar directionNumber of copies in the polar directionDistance and orientation of intervals in 'Axis' directionDistance and orientation of intervals in 'Axis' directionAngle to cover with copiesAngle to cover with copiesDistance between concentric circlesDistance between concentric circlesDistance between copies in the same circleDistance between copies in the same circleNumber of concentric circle. The 'Base' object counts as one circle.Number of concentric circle. The 'Base' object counts as one circle.A parameter that determines how many symmetry planes the circular array will haveA parameter that determines how many symmetry planes the circular array will haveTotal number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Base object that will be duplicatedBasisobject dat zal worden gedupliceerdObject containing points used to distribute the copies.Object containing points used to distribute the copies.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Additional placement, shift and rotation, that will be applied to each copyAdditional placement, shift and rotation, that will be applied to each copyThe base object this 2D view must representThe base object this 2D view must representThe projection vector of this objectThe projection vector of this objectThe way the viewed object must be projectedThe way the viewed object must be projectedThe indices of the faces to be projected in Individual Faces modeThe indices of the faces to be projected in Individual Faces modeShow hidden linesToon verborgen lijnenFuse wall and structure objects of same type and materialFuse wall and structure objects of same type and materialTessellate Ellipses and B-splines into line segmentsTessellate Ellipses and B-splines into line segmentsFor Cutlines and Cutfaces modes, this leaves the faces at the cut locationFor Cutlines and Cutfaces modes, this leaves the faces at the cut locationLength of line segments if tessellating Ellipses or B-splines into line segmentsLength of line segments if tessellating Ellipses or B-splines into line segmentsIf this is True, this object will include only visible objectsIf this is True, this object will include only visible objectsA list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.If this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyThis object will be recomputed only if this is True.This object will be recomputed only if this is True.The points of the Bezier curveThe points of the Bezier curveThe degree of the Bezier functionThe degree of the Bezier functionContinuityContinuïteitIf the Bezier curve should be closed or notIf the Bezier curve should be closed or notCreate a face if this curve is closedCreate a face if this curve is closedThe length of this objectDe lengte van dit objectThe placement of this objectDe plaatsing van dit objectX LocationX locatieY LocationY locatieZ LocationZ locatieStart angle of the elliptical arcStart angle of the elliptical arcEnd angle of the elliptical arc
(for a full circle, give it same value as First Angle)End angle of the elliptical arc
(for a full circle, give it same value as First Angle)Minor radius of the ellipseMinor radius of the ellipseMajor radius of the ellipseMajor radius of the ellipseArea of this objectArea of this objectThe start point of this line.The start point of this line.The end point of this line.The end point of this line.The length of this line.The length of this line.Radius to use to fillet the corner.Radius to use to fillet the corner.The normal direction of the text of the dimensionThe normal direction of the text of the dimensionThe object measured by this dimensionThe object measured by this dimensionThe object, and specific subelements of it,
that this dimension is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.The object, and specific subelements of it,
that this dimension is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.When measuring circular arcs, it determines whether to display
the radius or the diameter valueWhen measuring circular arcs, it determines whether to display
the radius or the diameter valueStarting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Starting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.Length of the rectangleLengte van de rechthoekHeight of the rectangleHoogte van de rechthoekHorizontal subdivisions of this rectangleHorizontal subdivisions of this rectangleVertical subdivisions of this rectangleVertical subdivisions of this rectangleLinked facesLinked facesSpecifies if splitter lines must be removedSpecifies if splitter lines must be removedAn optional extrusion value to be applied to all facesAn optional extrusion value to be applied to all facesAn optional offset value to be applied to all facesAn optional offset value to be applied to all facesThis specifies if the shapes sewThis specifies if the shapes sewThe area of the faces of this FacebinderThe area of the faces of this FacebinderThe components of this blockThe components of this blockThe vertices of the wireThe vertices of the wireIf the wire is closed or notIf the wire is closed or notThe base object is the wire, it's formed from 2 objectsThe base object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe start point of this lineHet beginpunt van deze lijnThe end point of this lineHet eindpunt van deze lijnThe length of this lineDe lengte van deze lijnCreate a face if this object is closedCreate a face if this object is closedThe number of subdivisions of each edgeHet aantal onderverdelingen van elke randThe points of the B-splineThe points of the B-splineIf the B-spline is closed or notIf the B-spline is closed or notCreate a face if this B-spline is closedCreate a face if this B-spline is closedParameterization factorParameterization factorForce sync pattern placements even when array elements are expandedForce sync pattern placements even when array elements are expandedShow the individual array elementsToon de afzonderlijke array-elementenText colorTekst kleurLine spacing (relative to font size)Line spacing (relative to font size)Vertical alignmentVerticale uitlijningMaximum number of characters on each line of the text boxMaximum number of characters on each line of the text boxHorizontal alignmentHorizontale uitlijningThe type of frame around the text of this objectThe type of frame around the text of this objectDisplay a leader line or notDisplay a leader line or notLine widthLijndikteLine colorLijnkleurDefines an SVG pattern.Defines an SVG pattern.Defines the size of the SVG pattern.Defines the size of the SVG pattern.If it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the shape appearance of the layerIf it is true, the objects contained within this layer will adopt the shape appearance of the layerIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageThe line color of the objects contained within this layerThe line color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape appearance of the objects contained within this layerThe shape appearance of the objects contained within this layerThe line width of the objects contained within this layerThe line width of the objects contained within this layerThe draw style of the objects contained within this layerThe draw style of the objects contained within this layerThe transparency of the objects contained within this layerThe transparency of the objects contained within this layerThe line color of the objects contained within this layer, when used on a TechDraw pageThe line color of the objects contained within this layer, when used on a TechDraw pageFont nameFont naamFont sizeLettergrootteSpacing between text and dimension lineSpacing between text and dimension lineRotate the dimension text 180 degreesRotate the dimension text 180 degreesText Position.
Leave '(0,0,0)' for automatic positionText Position.
Leave '(0,0,0)' for automatic positionText override.
Write '$dim' so that it is replaced by the dimension length.Text override.
Write '$dim' so that it is replaced by the dimension length.The number of decimals to showThe number of decimals to showShow the unit suffixShow the unit suffixA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationArrow sizePijl grootteArrow typePijl typeRotate the dimension arrows 180 degreesRotate the dimension arrows 180 degreesThe distance the dimension line is extended
past the extension linesThe distance the dimension line is extended
past the extension linesLength of the extension linesLengte van de verlengingslijnenLength of the extension line
beyond the dimension lineLength of the extension line
beyond the dimension lineShows the dimension line and arrowsShows the dimension line and arrowsThe display length of this section planeThe display length of this section planeThe size of the arrows of this section planeThe size of the arrows of this section planeDefines a texture image (overrides hatch patterns)Defines a texture image (overrides hatch patterns)CommandTransformTransformerenQObjectDraftKantelImport-ExportImporteren-ExporterenDraft_AnnotationStyleEditorAnnotation StylesAnnotation StylesOpens an editor to manage or create annotation stylesOpens an editor to manage or create annotation stylesDraft_Arc_3PointsArc From 3 PointsArc From 3 PointsCreates a circular arc from 3 pointsCreates a circular arc from 3 pointsDraft_ArcToolsArc ToolsArc ToolsTools to create various types of circular arcsTools to create various types of circular arcsDraft_ArrayToolsArray ToolsArray ToolsTools to create various types of arrays, including rectangular, polar, circular, path, and point arraysTools to create various types of arrays, including rectangular, polar, circular, path, and point arraysDraft_BezCurveBézier CurveBézier CurveCreates an n-degree Bézier curve. The more points, the higher the degree.Creates an n-degree Bézier curve. The more points, the higher the degree.Draft_CubicBezCurveCubic Bézier CurveCubic Bézier CurveCreates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments.
Control points and properties of each knot can be edited after creation.Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments.
Control points and properties of each knot can be edited after creation.Draft_BezierToolsBézier ToolsBézier ToolsTools to create various types of Bézier curvesTools to create various types of Bézier curvesDraft_CircularArrayCircular ArrayCircular ArrayCreates copies of the selected object in a radial pattern with 1 or more circular layersCreates copies of the selected object in a radial pattern with 1 or more circular layersDraft_FlipDimensionFlip DimensionFlip DimensionFlips the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Flips the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Draft_Draft2SketchDraft to SketchDraft to SketchConverts bidirectionally between Draft objects and sketches.
Multiple selected Draft objects are converted into a single sketch.
However, a single sketch with disconnected traces is converted into several individual Draft objects.Converts bidirectionally between Draft objects and sketches.
Multiple selected Draft objects are converted into a single sketch.
However, a single sketch with disconnected traces is converted into several individual Draft objects.Draft_ToggleGridToggle GridToggle GridToggles the visibility of the Draft gridToggles the visibility of the Draft gridDraft_AddToGroupAdd to GroupAdd to GroupAdds selected objects to a group, or removes them from any groupAdds selected objects to a group, or removes them from any groupDraft_SelectGroupSelect GroupSelect GroupSelects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected.Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected.Draft_AutoGroupAuto-GroupAuto-GroupAdds new Draft and BIM objects to the selected layer or groupAdds new Draft and BIM objects to the selected layer or groupDraft_AddConstructionAdd to Construction GroupAdd to Construction GroupAdds the selected objects to the construction group,
and changes their appearance to the construction style.
The construction group is created if it does not exist.Adds the selected objects to the construction group,
and changes their appearance to the construction style.
The construction group is created if it does not exist.Draft_AddNamedGroupNew Named GroupNew Named GroupAdds a group with a given nameAdds a group with a given nameDraft_HyperlinkOpen LinksOpen LinksOpens linked documentsOpens linked documentsDraft_AddToLayerAdd to LayerAdd to LayerAdds selected objects to a layer, or removes them from any layerAdds selected objects to a layer, or removes them from any layerDraft_LayerManagerManage LayersManage LayersAllows to modify the layersAllows to modify the layersDraft_SlopeSet SlopeSet SlopeSets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn on the XY-plane.Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn on the XY-plane.Draft_PathArrayPath ArrayPath ArrayCreates copies of the selected object along a selected pathCreates copies of the selected object along a selected pathDraft_PathLinkArrayPath Link ArrayPath Link ArrayCreates linked copies of the selected object along a selected pathCreates linked copies of the selected object along a selected pathDraft_PathTwistedArrayTwisted Path ArrayTwisted Path ArrayCreates twisted copies of the selected object along a selected pathCreates twisted copies of the selected object along a selected pathDraft_PathTwistedLinkArrayTwisted Path Link ArrayTwisted Path Link ArrayCreates twisted linked copies of the selected object along a selected pathCreates twisted linked copies of the selected object along a selected pathDraft_WorkingPlaneProxyWorking Plane ProxyWorking Plane ProxyCreates a proxy object from the current working plane that allows to restore the camera position and visibility of objectsCreates a proxy object from the current working plane that allows to restore the camera position and visibility of objectsDraft_PointArrayPoint ArrayPoint ArrayCreates copies of the selected object at the points of a point objectCreates copies of the selected object at the points of a point objectDraft_PointLinkArrayPoint Link ArrayPoint Link ArrayCreates linked copies of the selected object at the points of a point objectCreates linked copies of the selected object at the points of a point objectDraft_PolarArrayPolar ArrayPolar ArrayCreates copies of the selected object in a polar patternCreates copies of the selected object in a polar patternDraft_SelectPlaneWorking PlaneWorking PlaneDefines the working plane from 3 vertices, 1 or more shapes, or an objectDefines the working plane from 3 vertices, 1 or more shapes, or an objectDraft_SetStyleSet StyleSet StyleSets the default style and can apply the style to objectsSets the default style and can apply the style to objectsDraft_Shape2DViewShape 2D ViewShape 2D ViewCreates a 2D projection of the selected objects on the XY-plane.
The initial projection direction is the opposite of the current active view direction.Creates a 2D projection of the selected objects on the XY-plane.
The initial projection direction is the opposite of the current active view direction.Draft_ShapeStringShape From TextShape From TextCreates a shape from a text string and a specified fontCreates a shape from a text string and a specified fontDraft_Snap_LockSnap LockSnap LockEnables or disables snapping globallyEnables or disables snapping globallyDraft_Snap_MidpointSnap MidpointSnap MidpointSnaps to the midpoint of edgesSnaps to the midpoint of edgesDraft_Snap_PerpendicularSnap PerpendicularSnap PerpendicularSnaps to the perpendicular points on faces and edgesSnaps to the perpendicular points on faces and edgesDraft_Snap_GridSnap GridSnap GridSnaps to the intersections of grid linesSnaps to the intersections of grid linesDraft_Snap_IntersectionSnap IntersectionSnap IntersectionSnaps to the intersection of 2 edges, and the intersection of a face and an edgeSnaps to the intersection of 2 edges, and the intersection of a face and an edgeDraft_Snap_ParallelSnap ParallelSnap ParallelSnaps to an imaginary line parallel to straight edgesSnaps to an imaginary line parallel to straight edgesDraft_Snap_EndpointSnap EndpointSnap EndpointSnaps to the endpoints of edgesSnaps to the endpoints of edgesDraft_Snap_AngleSnap AngleSnap AngleSnaps to the special cardinal points on circular edges, at multiples of 30° and 45°Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°Draft_Snap_CenterSnap CenterSnap CenterSnaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building partsSnaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building partsDraft_Snap_ExtensionSnap ExtensionSnap ExtensionSnaps to an imaginary line that extends beyond the endpoints of straight edgesSnaps to an imaginary line that extends beyond the endpoints of straight edgesDraft_Snap_NearSnap NearSnap NearSnaps to the nearest point on faces and edgesSnaps to the nearest point on faces and edgesDraft_Snap_OrthoSnap OrthoSnap OrthoSnaps to imaginary lines that cross the previous point at multiples of 45°Snaps to imaginary lines that cross the previous point at multiples of 45°Draft_Snap_SpecialSnap SpecialSnap SpecialSnaps to special points defined by the objectSnaps to special points defined by the objectDraft_Snap_DimensionsSnap DimensionsSnap DimensionsShows temporary X and Y dimensionsShows temporary X and Y dimensionsDraft_Snap_WorkingPlaneSnap Working PlaneSnap Working PlaneProjects snap points onto the current working planeProjects snap points onto the current working planeDraft_ShowSnapBarShow Snap ToolbarShow Snap ToolbarShows the snap toolbar if it is hiddenShows the snap toolbar if it is hiddenDraft_BSplineB-SplineB-SplineCreates a multiple-point B-splineCreates a multiple-point B-splineDraft_ApplyStyleApply Current StyleApply Current StyleApplies the current style to the selected objects and groupsApplies the current style to the selected objects and groupsDraft_SubelementHighlightHighlight SubelementsHighlight SubelementsHighlights the subelements of the selected objects, to be able to move, rotate, and scale themHighlights the subelements of the selected objects, to be able to move, rotate, and scale themDraft_ToggleConstructionModeToggle Construction ModeToggle Construction ModeToggles the construction modeToggles the construction modeDraft_ToggleDisplayModeToggle WireframeToggle WireframeSwitches the view style of the selected objects from Flat Lines to Wireframe and backSwitches the view style of the selected objects from Flat Lines to Wireframe and backDraft_WireToBSplineConvert Wire/B-SplineConvert Wire/B-SplineConverts the selected polyline to a B-spline, or the selected B-spline to a polylineConverts the selected polyline to a B-spline, or the selected B-spline to a polylineDxfImportDialogDXF ImportDXF ImportImport AsImport AsCreates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench.Creates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench.Editable Draft objectsEditable Draft objectsCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing.Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing.Editable Part primitivesEditable Part primitivesCreates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Individual Part shapes (recommended)Individual Part shapes (recommended)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for viewing very large files with maximum performance.Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for viewing very large files with maximum performance.Fused Part shapes (fastest)Fused Part shapes (fastest)File summaryFile summaryWarningWaarschuwingDo not show this dialog againDo not show this dialog again