Dialog Annotation Styles Editor Editor gaya anotasi Style name Nama gaya The name of your style. Existing style names can be edited. Nama gaya anda. Nama yang telah wujud boleh diubah. Add new... Tambah baharu... Renames the selected style Ubah nama gaya terpilih Rename Nama semula Deletes the selected style Padam gaya yang dipilih Layers manager Lapisan Pengurusan New Baru Delete Padam Select all Pilih semua Toggle on/off Togol hidup/mati Isolate Asingkan Cancel Batal OK OK Import styles from json file Import gaya dari fail json Export styles to json file Export gaya ke fail json The font to use for texts and dimensions Fon yang digunakan untuk teks dan dimensi Font name Nama fon The font size in system units Saiz fon dalam unit sistem Lines and arrows Garisan dan anak panah The width of the lines Lebar garisan px px The type of arrows or markers to use for dimensions and labels Jenis anak panah atau penanda untuk digunakan untuk dimensi dan label The size of the arrows or markers in system units Saiz anak panah atau penanda dalam unit sistem The color of lines and arrows Warna garisan dan anak panah Line and arrow color Warna garis dan anak panah The distance the dimension line is additionally extended Jarak garis dimensi dilanjutkan Dimension line overshoot Overshoot garisan dimensi Extension line length Panjang talian sambungan The distance the extension lines are additionally extended beyond the dimension line Jarak garis sambungan dilanjutkan di luar garisan dimensi Font size Font size The line spacing for multi-line texts and labels (relative to the font size) Jarak baris untuk teks dan label berbilang baris (berbanding dengan saiz fon) The color of texts, dimension texts and label texts Warna teks, teks dimensi dan teks label Text color Warna teks Units Unit A multiplier factor that affects the size of texts and markers Faktor pengganda yang mempengaruhi saiz teks dan penanda Scale multiplier Pengganda skala If it is checked it will show the unit next to the dimension value Jika ia ditanda ia akan menunjukkan unit di sebelah nilai dimensi Show unit Tunjukkan unit Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit Tentukan unit panjang yang sah seperti mm, m, dalam, kaki, untuk memaksa memaparkan nilai dimensi dalam unit ini Unit override Penggantian unit The number of decimals to show for dimension values Bilangan perpuluhan untuk ditunjukkan untuk nilai dimensi The distance between the dimension text and the dimension line Jarak antara teks dimensi dan garis dimensi Text spacing Jarak teks If it is checked it will display the dimension line Jika ia disemak ia akan memaparkan garisan dimensi Annotations Annotations Texts Teks Line spacing factor Faktor jarak baris Show dimension line Tunjukkan garisan dimensi Line width Lebar garisan Arrow type Jenis Anak Panah Dot Dot Circle Bulatan Arrow Anak panah Tick Tandakan Tick-2 Tandakan-2 Arrow size Saiz Anak Panah Number of decimals Bilangan perpuluhan Dimension details Butiran dimensi Extension line overshoot Terlebih talian sambungan The length of the extension lines Panjang garis sambungan DraftCircularArrayTaskPanel Circular array Tatasusunan bulat Distance from one layer of objects to the next layer of objects. Jarak dari satu lapisan objek ke lapisan objek seterusnya. Radial distance Jarak jejari Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. Jarak dari satu elemen dalam satu gelang tatasusunan ke elemen seterusnya dalam gelang yang sama. Ia tidak boleh sifar. Tangential distance Jarak tangensial Number of circular layers or rings to create, including a copy of the original object. It must be at least 2. Bilangan lapisan atau gelang bulat untuk dibuat, termasuk salinan objek asal. Ia mestilah sekurang-kurangnya 2. Number of circular layers Bilangan lapisan bulat The number of symmetry lines in the circular array. Bilangan garis simetri dalam tatasusunan bulat. Symmetry Simetri The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Koordinat titik yang dilalui oleh paksi putaran. Tukar arah paksi itu sendiri dalam editor hartanah. Center of rotation Pusat putaran X X Y Y Z Z Reset the coordinates of the center of rotation. Tetapkan semula koordinat pusat putaran. Reset point Set semula titik If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Jika disemak, objek yang terhasil dalam tatasusunan akan disatukan jika mereka bersentuhan antara satu sama lain. Ini hanya berfungsi jika "susunan pautan" dimatikan. Fuse Fius If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Jika ditandakan, objek yang terhasil akan menjadi "tatasusunan pautan" dan bukannya tatasusunan biasa. Tatasusunan Pautan lebih cekap apabila mencipta berbilang salinan, tetapi ia tidak boleh digabungkan bersama. Link array Tatasusunan pautan DraftOrthoArrayTaskPanel Orthogonal array Tatasusunan ortogon Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. Bilangan elemen dalam tatasusunan dalam arah yang ditentukan, termasuk salinan objek asal. Nombor mestilah sekurang-kurangnya 1 dalam setiap arah. Number of elements Bilangan unsur X X Y Y Z Z Distance between the elements in the X direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Jarak antara unsur dalam arah X. Biasanya, hanya nilai X diperlukan; dua nilai yang lain boleh memberikan anjakan tambahan dalam arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan ke arah negatif. X intervals Selang X Reset the distances. Tetapkan semula jarak. Reset X Tetapkan semula X Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Jarak antara unsur dalam arah Y. Biasanya, hanya nilai Y diperlukan; dua nilai yang lain boleh memberikan anjakan tambahan dalam arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan ke arah negatif. Y intervals Selang Y Reset Y Tetapkan semula Y Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Jarak antara unsur dalam arah Z. Biasanya, hanya nilai Z diperlukan; dua nilai yang lain boleh memberikan anjakan tambahan dalam arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan ke arah negatif. Z intervals Selang Z Reset Z Tetapkan semula Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Jika disemak, objek yang terhasil dalam tatasusunan akan disatukan jika mereka bersentuhan antara satu sama lain. Ini hanya berfungsi jika "susunan pautan" dimatikan. Fuse Fius If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Jika ditandakan, objek yang terhasil akan menjadi "tatasusunan pautan" dan bukannya tatasusunan biasa. Tatasusunan Pautan lebih cekap apabila mencipta berbilang salinan, tetapi ia tidak boleh digabungkan bersama. Link array Tatasusunan pautan DraftPolarArrayTaskPanel Polar array Tatasusunan kutub Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. Sudut sapuan taburan kutub. Sudut negatif menghasilkan corak kutub dalam arah yang bertentangan. Nilai mutlak maksimum ialah 360 darjah. Polar angle Sudut kutub Number of elements in the array, including a copy of the original object. It must be at least 2. Bilangan elemen dalam tatasusunan, termasuk salinan objek asal. Ia mestilah sekurang-kurangnya 2. Number of elements Bilangan unsur The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Koordinat titik yang dilalui oleh paksi putaran. Tukar arah paksi itu sendiri dalam editor hartanah. Center of rotation Pusat putaran X X Y Y Z Z Reset the coordinates of the center of rotation. Tetapkan semula koordinat pusat putaran. Reset point Set semula titik If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Jika disemak, objek yang terhasil dalam tatasusunan akan disatukan jika mereka bersentuhan antara satu sama lain. Ini hanya berfungsi jika "susunan pautan" dimatikan. Fuse Fuse If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Jika ditandakan, objek yang terhasil akan menjadi "tatasusunan pautan" dan bukannya tatasusunan biasa. Tatasusunan Pautan lebih cekap apabila mencipta berbilang salinan, tetapi ia tidak boleh digabungkan bersama. Link array Tatasusunan pautan DraftShapeStringGui ShapeString ShapeString X X Enter coordinates or select point with mouse. Masukkan koordinat atau pilih titik dengan tetikus. Y Y Z Z Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Global Global Reset 3D point selection Reset 3D point selection Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Text to be made into ShapeString Teks untuk dijadikan ShapeString Height Ketinggian Reset point Set semula titik Height of the result Ketinggian hasil Text Teks Font file Fail fon Form Working plane setup Persediaan pesawat kerja Select 3 vertices, one or more shapes or a WP Proxy. Then confirm by clicking in the 3D view. Or choose one of the options below. Pilih 3 bucu, satu atau lebih bentuk atau Proksi WP. Kemudian sahkan dengan mengklik pada paparan 3D. Atau pilih salah satu pilihan di bawah. Sets the working plane to the XY plane (ground plane) Menetapkan satah kerja kepada satah XY (satah tanah) Top (XY) Atas (XY) Sets the working plane to the XZ plane (front plane) Menetapkan satah kerja kepada satah XZ (satah hadapan) Front (XZ) Depan (XZ) Sets the working plane to the YZ plane (side plane) Menetapkan satah kerja kepada satah XZ (satah hadapan) Side (YZ) Sisi (YZ) Sets the working plane facing the current view Menetapkan satah kerja menghadap pandangan semasa Align to view Jajar untuk melihat The working plane will align to the current view each time a command is started Satah kerja akan sejajar dengan arus lihat setiap kali arahan dimulakan Automatic Automatik Offset Tutup An optional offset to give to the working plane above its base position. Use this together with one of the buttons above Offset pilihan untuk diberikan kepada satah kerja di atas kedudukan asasnya. Gunakan ini bersama-sama dengan satu daripada butang di atas If this is selected, the working plane will be centered on the current view when pressing one of the buttons above Jika ini dipilih, satah kerja akan menjadi berpusat pada paparan semasa apabila menekan satu daripada butang di atas Center plane on view Pandangan di tengah pesawat Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Atau pilih satu bucu untuk menggerakkan satah kerja semasa tanpa mengubah orientasinya. Kemudian tekan butang di bawah. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. Borang['Menggerakkan satah kerja tanpa mengubahnya orientasi. Jika tiada titik dipilih, satah akan dialihkan ke tengah pandangan.']. The color of the grid Borang['Warna grid'] Borang../ui/TaskSelectPlane.ui../ui/TaskSelectPlane.ui Grid color Grid color The distance between grid lines The distance between grid lines The number of squares between major grid lines The number of squares between major grid lines Major lines every Major lines every squares squares The number of squares in the X and Y direction of the grid The number of squares in the X and Y direction of the grid Grid size Grid size The distance at which a point can be snapped to The distance at which a point can be snapped to Resets the working plane to its next position Menetapkan semula satah kerja ke kedudukan seterusnya Next Seterusnya Move working plane Pindahkan pesawat kerja Grid spacing Grid spacing Snapping radius Jejari sentap Centers the view on the current working plane Memusatkan pandangan pada satah kerja semasa Center view Pandangan tengah Resets the working plane to its previous position Menetapkan semula satah kerja ke kedudukan sebelumnya Previous Sebelumnya Style settings Tetapan gaya Load preset Muatkan pratetap Shape Shape Shape appearance Shape appearance Ambient shape color Ambient shape color Emissive shape color Emissive shape color Specular shape color Specular shape color Shape transparency Shape transparency Shape shininess Shape shininess Other Other Line color Warna Garisan Line width Lebar garisan px px Draw style Draw style Solid Pejal Dashed Putus Dotted Bertitik DashDot DashDot Display mode Mod Paparan Flat Lines Garisan Rata Wireframe Rangka wayar Shaded Berlorek Fill the values below from a stored style preset Isikan nilai di bawah daripada pratetap gaya tersimpan Save the current style as a preset... Simpan gaya semasa sebagai pratetap... Point color Point color Point size Point size Points Points Shape color Shape color Annotations Annotations Text spacing Jarak teks Text color Warna teks Dimensions Dimensi Dot Dot Annotation Anotasi Texts Teks Line spacing factor Faktor jarak baris The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Lines and arrows Garisan dan anak panah Circle Bulatan Arrow Anak panah Tick Tandakan Tick-2 Tandakan-2 If checked, a unit symbol is added to dimension texts If checked, a unit symbol is added to dimension texts The unit override for dimensions. Leave blank to use the current FreeCAD unit. The unit override for dimensions. Leave blank to use the current FreeCAD unit. The distance the dimension line is extended past the extension lines Jarak garis dimensi dilanjutkan melepasi garisan sambungan The color for texts, dimension texts and label texts The color for texts, dimension texts and label texts Font name Nama fon The font for texts, dimensions and labels The font for texts, dimensions and labels Font size Saiz huruf The height for texts, dimension texts and label texts The height for texts, dimension texts and label texts The line spacing for multi-line texts and labels (relative to the font size) Jarak baris untuk teks dan label berbilang baris (berbanding dengan saiz fon) Scale multiplier Pengganda skala Line and arrow color Warna garis dan anak panah Arrow type Jenis Anak Panah Arrow size Saiz Anak Panah Dim line overshoot Dim line overshoot Ext line length Ext line length The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. Ext line overshoot Ext line overshoot The length of extension lines above the dimension line The length of extension lines above the dimension line The space between the dimension line and the dimension text The space between the dimension line and the dimension text Apply the above style to selected object(s) Apply the above style to selected object(s) Apply the above style to all annotations (texts, dimensions and labels) Apply the above style to all annotations (texts, dimensions and labels) Show unit Tunjukkan unit Unit override Penggantian unit Selected Selected Hatch Hatch PAT file: PAT file: Pattern files (*.pat *.PAT) Pattern files (*.pat *.PAT) Pattern: Pattern: Scale: Scale: Rotation: Rotation: Align to face: Align to face: If checked, the pattern aligns with the base object. If unchecked, the pattern aligns with the global coordinate system. This setting modifies the Translate property. If checked, the pattern aligns with the base object. If unchecked, the pattern aligns with the global coordinate system. This setting modifies the Translate property. Gui::Dialog::DlgSettingsDraft Default working plane Default working plane General Umum The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. Bilangan tempat perpuluhan yang digunakan dalam operasi koordinat dalaman (contohnya 3 = 0.001). Nilai antara 6 dan 8 biasanya dianggap sebagai pertukaran terbaik. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. Satah kerja lalai untuk pandangan baru. Jika ditetapkan kepada 'Automatik', satah kerja akan diselaraskan secara automatik dengan pandangan semasa setiap kali arahan dimulakan. Selain itu, ia juga akan diselaraskan dengan muka rata yang telah dipilih terlebih dahulu, atau apabila titik pada muka rata dipilih semasa arahan dijalankan. XY (Top) XY (Atas) XZ (Front) XZ (Depan) YZ (Side) YZ (Sisi) If checked, a widget indicating the current working plane orientation appears when picking points Jika ditandakan, wiget yang menunjukkan orientasi satah kerja semasa akan muncul apabila memilih titik Show working plane tracker Tunjukkan penjejak satah kerja If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. Jika ditandakan, senarai jatuh ke bawah lapisan juga akan termasuk kumpulan. Objek boleh ditambahkan secara automatik ke dalam kumpulan juga. Include groups in layer list Masukkan kumpulan dalam senarai lapisan Command options Pilihan arahan If checked, instructions are displayed in the Report view when using Draft commands Jika ditandakan, arahan akan dipaparkan dalam pandangan Laporan semasa menggunakan arahan Draf Show prompts in the Report view Show prompts in the Report view If checked, base objects, instead of created copies, are selected after copying Jika ditandakan, objek asas, bukannya salinan yang dicipta, akan dipilih selepas penyalinan If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. Jika ditandakan, arahan Draf akan mencipta primitif Bahagian dan bukannya objek Draf. Perhatikan bahawa ini tidak disokong sepenuhnya, dan banyak objek tidak akan boleh diubah suai menggunakan arahan pengubahsuaian Draf. Create Part primitives if possible Cipta bahagian primitif jika boleh If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. Jika ditandakan, Draf penurunan dan Draf peningkatan akan mengekalkan warna muka. Hanya untuk pilihan splitFaces dan makeShell. Keep face colors during downgrade/upgrade Kekalkan warna muka semasa penurunan/peningkatan If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. Jika ditandakan, Draf penurunan dan Draf peningkatan akan mengekalkan nama muka. Hanya untuk pilihan splitFaces dan makeShell. Keep face names during downgrade/upgrade Simpan nama muka semasa penurunan/peningkatan. This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. Ini adalah kelewatan di mana tetikus tidak aktif, selepas memasukkan nombor secara manual dalam mana-mana medan koordinat. Menetapkan ini kepada 0 akan mematikan kelewatan. Jika kelewatan 1 ditetapkan, selepas memasukkan nilai nombor, tetikus tidak akan mengemas kini medan lagi selama satu saat, untuk mengelakkan pergerakan tetikus secara tidak sengaja dan mengubah nilai yang dimasukkan. Max. number of editable objects Bilangan maksimum objek yang boleh diubah suai Edit node pick radius Radius pemilihan nod untuk pengeditan The pick radius of edit nodes Radius pemilihan nod untuk pengeditan Label prefix for clones Awalan label untuk klon The default prefix added to the label of new clones The default prefix added to the label of new clones Construction group label Label kumpulan pembinaan The default label for the construction geometry group Label lalai untuk kumpulan geometri pembinaan The default color for Draft objects in construction mode Warna lalai untuk objek Draf dalam mod pembinaan Internal precision level Tahap ketepatan dalaman If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. Set focus on Length instead of X coordinate Tetapkan fokus pada Panjang dan bukannya koordinat X Select base objects after copying Pilih objek asas selepas menyalin Construction Pembinaan Construction geometry color Warna geometri pembinaan Draft classic style Draf gaya klasik Bitsnpieces style Gaya bitsnpieces Visual Visual SVG patterns Corak SVG SVG pattern size Saiz corak SVG The default size for SVG patterns. A higher value results in a denser pattern. Saiz lalai untuk corak SVG. Nilai yang lebih tinggi menghasilkan corak yang lebih padat. Additional SVG pattern location Lokasi corak SVG tambahan An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns Direktori pilihan dengan fail SVG tersuai yang mengandungi takrifan corak untuk ditambahkan pada corak piawai Drawing view line definitions Melukis definisi garis pandangan Dashed line definition Definisi garis putus-putus An SVG linestyle definition Definisi gaya garisan SVG Dashdot line definition Takrif garisan dashdot Dotted line definition Definisi garis putus-putus Texts and dimensions Teks dan Dimensi Font size saiz huruf tulisan mm mm Number of decimals Bilangan perpuluhan Extension line overshoot Terlebih talian sambungan Dimension line overshoot Overshoot garisan dimensi Texts Teks The default height for texts, dimension texts and label texts Ketinggian lalai untuk teks, teks dimensi dan teks label Line spacing factor Faktor jarak baris The default line spacing for multi-line texts and labels (relative to the font size) Jarak baris untuk teks dan label berbilang baris (berbanding dengan saiz fon) Scale multiplier Pengganda skala Annotations Annotations The default annotation scale multiplier. This is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Pengganda skala anotasi lalai. Ini adalah songsangan bagi set skala dalam widget skala Anotasi. Jika skala ialah 1:100, pengganda ialah 100. Font name Nama fon The default font for texts, dimensions and labels The default font for texts, dimensions and labels Text color Warna teks The default color for texts, dimension texts and label texts Ketinggian lalai untuk teks, teks dimensi dan teks label Lines and arrows Garisan dan anak panah If checked, the dimension line is displayed by default Jika ditanda, garis dimensi dipaparkan secara lalai Show dimension line Tunjukkan garisan dimensi Line width lebar garisan The default line width Lebar garis lalai px px Arrow type Jenis Anak Panah The default symbol displayed at the ends of dimension lines Simbol lalai dipaparkan di hujung garisan dimensi Dot Dot Circle Bulatan Arrow Anak panah Tick Tandakan Tick-2 Tandakan-2 Arrow size Saiz Anak Panah The default arrow size Saiz anak panah lalai Line and arrow color Warna garis dan anak panah The default color for lines and arrows Warna garisan dan anak panah Units Unit If checked, a unit symbol is added to dimension texts by default Jika ditandakan, simbol unit ditambahkan pada teks dimensi secara lalai Show unit Tunjukkan unit Unit override Penggantian unit The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. Penggantian unit lalai untuk dimensi. Masukkan unit seperti m atau cm, biarkan kosong untuk menggunakan unit semasa yang ditakrifkan dalam FreeCAD. The default number of decimal places for dimension texts Bilangan tempat perpuluhan untuk teks dimensi The optional string inserted between the feet and inches values in dimensions Rentetan pilihan yang dimasukkan di antara nilai kaki dan inci dalam dimensi Dimension details Butiran dimensi The default distance the dimension line is extended past the extension lines Jarak garis dimensi dilanjutkan melepasi garisan sambungan Extension line length Panjang talian sambungan The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. Panjang lalai garis sambungan. Gunakan 0 untuk baris sambungan penuh. A negatif nilai mentakrifkan jurang antara hujung garis lanjutan dan yang diukur mata. Nilai positif mentakrifkan panjang maksimum garis sambungan. Sahaja digunakan untuk dimensi linear. The default length of extension lines above the dimension line Panjang lalai garis sambungan di atas garis dimensi The default space between the dimension line and the dimension text Jarak antara teks dimensi dan garis dimensi Text spacing Jarak teks Feet separator Pemisah kaki SVG SVG Import style Memasukkan gaya Method for importing SVG object colors into FreeCAD Method for importing SVG object colors into FreeCAD Use default style from Part/PartDesign Use default style from Part/PartDesign Use original SVG style Use original SVG style If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. Disable unit scaling Disable unit scaling If face generation results in a degenerated face, a raw Wire from the original Shape is added. If face generation results in a degenerated face, a raw Wire from the original Shape is added. Add wires for invalid faces Add wires for invalid faces Check to cut shapes according to the even/odd SVG fill rule. Check to cut shapes according to the even/odd SVG fill rule. Apply Cuts Apply Cuts Coordinate precision (crucial for detecting closed paths) Coordinate precision (crucial for detecting closed paths) The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. Export style Menyimpan gaya Style of SVG file to write when exporting a sketch Gaya fail SVG untuk ditulis semasa menyimpan lakaran Translated (for print & display) Diterjemahkan (untuk percetakan & paparan) Raw (for CAM) Raw (untuk CAM) All white lines will appear in black in the SVG for better readability against white backgrounds Semua garisan putih akan muncul dalam warna hitam dalam fail SVG untuk keboleh bacaan yang lebih baik terhadap latar belakang putih Translate white line color to black Tukar warna garisan putih kepada hitam Max segment length for discretized arcs Panjang segmen maksimum untuk lengkungan yang dipotong menjadi segmen Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. Versi OpenCASCADE yang lebih lama daripada versi 6.8 tidak menyokong projeksi lengkungan. Dalam kes ini, lengkungan akan dipotong menjadi segmen-segmen garis kecil. Nilai ini adalah panjang segmen maksimum. OCA OCA Check this if you want the areas (3D faces) to be imported too. Tandakan ini jika anda ingin kawasan (muka 3D) turut dimasukkan juga. Import OCA areas Masukkan kawasan OCA DXF DXF This preferences dialog will be shown when importing/ exporting DXF files Dialog pilihan ini akan dipaparkan semasa memasukkan/menyimpan fail DXF Show this dialog when importing and exporting Tunjukkan dialog ini bila memasukkan dan menyimpan Python importer is used, otherwise the newer C++ is used. Note: C++ importer is faster, but is not as featureful yet Pengeksport Python digunakan, jika tidak, pengeksport C++ yang lebih baru akan digunakan. Nota: Pengeksport C++ lebih pantas, tetapi belum mempunyai banyak ciri Python exporter is used, otherwise the newer C++ is used. Note: C++ exporter is faster, but is not as featureful yet Pengeksport Python digunakan, jika tidak, pengeksport C++ yang lebih baru akan digunakan. Nota: Pengeksport C++ lebih pantas, tetapi belum mempunyai banyak ciri Allow FreeCAD to download the Python converter for DXF import and export. You can also do this manually by installing the "dxf_library" workbench from the Addon Manager. Benarkan FreeCAD memuat turun penukar Python untuk import dan eksport DXF. Anda juga boleh melakukannya secara manual dengan memasang 'dxf_library' workbench dari Pengurus Addon Allow FreeCAD to automatically download and update the DXF libraries Benarkan FreeCAD untuk memuat turun dan mengemas kini pustaka DXF secara automatik. Import options Pilihan import Import Import If unchecked, texts and mtexts won't be imported Jika tidak ditandakan, teks dan mtexts tidak akan diimport If unchecked, points won't be imported Jika tidak ditandakan, kutipan mata tidak akan diimport. points kutipan mata If checked, paper space objects will be imported too Jika ditandakan, objek ruang kertas juga akan diimport If you want the non-named blocks (beginning with a *) to be imported too Jika anda mahu blok yang tidak dinamakan (dimulakan dengan *) untuk diimport juga *blocks *bloks Create Cipta Only standard Part objects will be created (fastest) Hanya objek bahagian standard yang akan dicipta (pantas) Parametric Draft objects will be created whenever possible Objek Draf parametrik akan dicipta apabila mungkin Draft objects Draf objek Sketches will be created whenever possible Lakaran akan dibuat apabila boleh Sketches Lakaran Scale factor to apply to imported files Faktor skala untuk digunakan pada fail yang diimport Scale factor to apply to DXF files on import. The factor is the conversion between the unit of your DXF file and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 Faktor skala untuk digunakan pada fail DXF semasa import. Faktornya ialah penukaran antara unit fail DXF anda dan milimeter. Contoh: untuk fail dalam milimeter: 1, dalam sentimeter: 10, dalam meter: 1000, dalam inci: 25.4, dalam kaki: 304.8 Objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable. Objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable. Project exported objects along current view direction Project exported objects along current view direction FreeCAD will try to join coincident objects into wires. Note that this can take a while! FreeCAD will try to join coincident objects into wires. Note that this can take a while! Colors will set as specified in the DXF file whenever possible. Otherwise default colors will be applied. Colors will set as specified in the DXF file whenever possible. Otherwise default colors will be applied. Automatic update (legacy importer/exporter only) Automatic update (legacy importer/exporter only) Use legacy Python importer Use legacy Python importer Use legacy Python exporter Use legacy Python exporter Some options are not yet available for the new importer Some options are not yet available for the new importer Layouts Layouts Simple Part shapes Bahagian bentuk yang mudah Use colors from the DXF file Use colors from the DXF file Join geometry Join geometry Group layers into blocks Group layers into blocks Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document Use standard font size for texts Gunakan Saiz Fon Standard untuk teks If this is checked, DXF layers will be imported as Draft Layers If this is checked, DXF layers will be imported as Draft Layers Hatches will be converted into simple wires Hatches will be converted into simple wires Import hatch boundaries as wires Import hatch boundaries as wires If polylines have a width defined, they will be rendered as closed wires with correct width If polylines have a width defined, they will be rendered as closed wires with correct width Render polylines with width Render polylines with width Some options are not yet available for the new exporter Some options are not yet available for the new exporter Ellipse export is poorly supported. Use this to export them as polylines instead. Ellipse export is poorly supported. Use this to export them as polylines instead. Treat ellipses and splines as polylines Treat ellipses and splines as polylines Max Spline Segment: Max Spline Segment: Maximum length of each of the polyline segments. If it is set to '0' the whole spline is treated as a straight segment. Maximum length of each of the polyline segments. If it is set to '0' the whole spline is treated as a straight segment. Export options Pilihan Eksport Use layers Use layers All objects containing faces will be exported as 3D polyfaces All objects containing faces will be exported as 3D polyfaces Export 3D objects as polyface meshes Export 3D objects as polyface meshes TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. Export TechDraw Views as blocks Export TechDraw Views as blocks Exported objects will be projected to reflect the current view direction Exported objects will be projected to reflect the current view direction Grid and snapping Grid and snapping Shift Anjak Always snap Always snap If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. Major lines every Major lines every The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. squares squares The number of squares in the X and Y direction of the grid The number of squares in the X and Y direction of the grid Snap modifier Snap modifier The Snap modifier key The Snap modifier key Ctrl Ctrl Alt Alt Constrain modifier Constrain modifier The Constrain modifier key The Constrain modifier key Alt modifier Alt modifier The Alt modifier key. The function of this key depends on the command. The Alt modifier key. The function of this key depends on the command. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. The distance between grid lines The distance between grid lines The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time Only show the Draft snap toolbar during commands Only show the Draft snap toolbar during commands Grid Grid Always show the grid Sentiasa papar grid If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. Show the grid during commands Show the grid during commands If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner Show grid border Tunjukkan sempadan grid Show human figure Papar figura manusia If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system Jika ditandakan, dua paksi utama grid akan diwarnakan merah, hijau, atau biru jika ia sepadan dengan paksi X, Y, atau Z dalam sistem koordinat global Use colored axes Guna paksi berwarna Grid spacing Jarak rangkaian garisan Grid size Saiz rangkaian garisan Grid transparency Kebolehtelusan rangkaian garisan % % Grid color Warna rangkaian garisan Snapping and modifier keys Penyambungan dan kekunci modifier Snap symbol style Penyambungan gaya simbol Mouse delay Kelewatan tetikus seconds saat The style for snap symbols Gaya untuk simbol penjajaran Snap symbol color Snap symbol color The color for snap symbols The color for snap symbols If checked, snapping is activated without the need to press the Snap modifier key If checked, snapping is activated without the need to press the Snap modifier key The color of the grid Borang['Warna grid'] Borang../ui/TaskSelectPlane.ui../ui/TaskSelectPlane.ui The overall transparency of the grid The overall transparency of the grid DWG DWG DWG conversion DWG conversion Conversion method: Conversion method: This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. Ini adalah kaedah yang akan digunakan oleh FreeCAD untuk menukar fail DWG kepada DXF. Jika 'Automatik' dipilih, FreeCAD akan cuba mencari salah satu penukar berikut mengikut urutan yang ditunjukkan di sini. Jika FreeCAD tidak dapat menemui sebarang penukar, anda mungkin perlu memilih penukar tertentu dan menunjukkan laluan failnya di sini. Pilih utiliti 'dwg2dxf' jika menggunakan LibreDWG, 'ODAFileConverter' jika menggunakan penukar fail ODA, atau utiliti 'dwg2dwg' jika menggunakan versi pro QCAD Automatic Automatic LibreDWG LibreDWG ODA Converter ODA Converter QCAD pro QCAD pro Path to file converter Path to file converter The path to your DWG file converter executable The path to your DWG file converter executable <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> Relative Relative R R Continue Teruskan Close Tutup O O Copy Copy L L Interface Interface In-command shortcuts In-command shortcuts F F Select edge Select edge Subelement mode Subelement mode B B C C Exit Keluar A A Increase radius Increase radius Decrease radius Decrease radius UI options UI options If checked, the Draft snap toolbar will only be visible during commands Jika ditandakan, bar alat penjajaran Draf hanya akan kelihatan semasa arahan dijalankan Show the Snap widget in the Draft Workbench Paparkan widget Penjajaran dalam Workbench Draf Show the Annotation scale widget in the Draft Workbench Paparkan widget Skala Penandaan dalam Workbench Draf E E Q Q Length Length Wipe Wipe W W U U Global Global G G Make face Make face Undo Undo N N Cycle snap Cycle snap Add hold Add hold Set working plane Kunci: Arch['Tetapkan satah kerja'] Arch../../ArchBuildingPart. py: 918 Snap Snap S S Restrict X Restrict X X X Restrict Y Restrict Y Y Y Restrict Z Restrict Z Z Z Recenter Recenter D D If checked, the Snap widget is displayed in the Draft status bar If checked, the Snap widget is displayed in the Draft status bar If checked, the Annotation scale widget is displayed in the Draft status bar If checked, the Annotation scale widget is displayed in the Draft status bar draft Relative Relative Global Global Continue Teruskan Close Tutup Copy Copy Select edge Select edge Wipe Wipe Top Top Front Front Side Side Auto Auto Current working plane: Current working plane: Selected shapes do not define a plane Selected shapes do not define a plane No previous working plane No previous working plane No next working plane No next working plane Axes: Axes: Position: Position: None Tiada active command: active command: Active Draft command Active Draft command X X Y Y Z Z Enter point Enter point Length Length Angle Sudut Length of current segment Length of current segment Angle of current segment Angle of current segment Check this to lock the current angle Check this to lock the current angle Radius Radius Radius of Circle Radius of Circle Coordinates relative to last point or to coordinate system origin if is the first point to set Coordinates relative to last point or to coordinate system origin if is the first point to set Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Finish Finish Finishes the current drawing or editing operation Finishes the current drawing or editing operation If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset OCC-style offset OCC-style offset Undo Undo If checked, objects will be copied instead of moved If checked, objects will be copied instead of moved Undo the last segment Undo the last segment X coordinate of point X coordinate of point Y coordinate of point Y coordinate of point Z coordinate of point Z coordinate of point Enter a point with given coordinates Enter a point with given coordinates Make face Make face If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled Chained mode Chained mode If checked, the next Dimension will be placed in a chain with the previously placed Dimension If checked, the next Dimension will be placed in a chain with the previously placed Dimension Finishes and closes the current line Finishes and closes the current line Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point Set WP Set WP Reorients the working plane on the last segment Reorients the working plane on the last segment Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension Sides Sides Number of sides Number of sides Modify subelements Modify subelements If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects Create text Create text Press this button to create the text object, or finish your text with two blank lines Press this button to create the text object, or finish your text with two blank lines Change default style for new objects Change default style for new objects Toggle construction mode Toggle construction mode Autogroup off Autogroup off Line Line DWire DWire Circle Bulatan Arc Arka Rotate Putar Point Point Label Label Label type Label type Offset Tutup Distance Distance Offset distance Offset distance Trimex Trimex Local {} Local {} Global {} Global {} Autogroup: Autogroup: Modify objects Modify objects Faces Faces Remove Keluarkan Add Tambah Facebinder elements Facebinder elements Draft Draft Converting: Converting: Conversion successful Conversion successful LibreDWG converter not found LibreDWG converter not found ODA converter not found ODA converter not found QCAD converter not found QCAD converter not found No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. All Shapes must be coplanar All Shapes must be coplanar Selected Shapes must define a plane Selected Shapes must define a plane Custom Custom Unable to convert input into a scale factor Unable to convert input into a scale factor Set custom scale Set custom scale Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x Draft scale widget A context menu action used to show or hide this toolbar widget Draft scale widget Draft snap widget A context menu action used to show or hide this toolbar widget Draft snap widget Set the scale used by draft annotation tools Set the scale used by draft annotation tools No active document. Aborting. No active document. Aborting. Wrong input: object {} not in document. Wrong input: object {} not in document. Unable to insert new object into a scaled part Unable to insert new object into a scaled part Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. image is Null image is Null filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file unable to load texture unable to load texture Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. Solids: Solids: Faces: Faces: Wires: Wires: Edges: Edges: Vertices: Vertices: Face Face Wire Wire different types different types Objects have different placements. Distance between the two base points: Objects have different placements. Distance between the two base points: %s cannot be modified because its placement is readonly %s cannot be modified because its placement is readonly This function will be deprecated in {}. Please use '{}'. This function will be deprecated in {}. Please use '{}'. This function will be deprecated. Please use '{}'. This function will be deprecated. Please use '{}'. has a different value has a different value doesn't exist in one of the objects doesn't exist in one of the objects %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. Wrong input: unknown document {} Wrong input: unknown document {} Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. Path array Path array Pick target point Pick target point Create Label Create Label Pick endpoint of leader line Pick endpoint of leader line Pick text position Pick text position Pick first point Pick first point Create Line Create Line Create Wire Create Wire Polyline Polyline Pick next point Pick next point Unable to create a Wire from selected objects Unable to create a Wire from selected objects Convert to Wire Convert to Wire Select an object to join Select an object to join Join lines Join lines Only Draft Lines and Wires can be joined Only Draft Lines and Wires can be joined Selection: Selection: Pick location point Pick location point Create Text Create Text Select an object to convert. Select an object to convert. Convert to Sketch Convert to Sketch Convert to Draft Convert to Draft Convert Draft/Sketch Convert Draft/Sketch Select an object to move Select an object to move Pick start point Pick start point Pick end point Pick end point No valid subelements selected No valid subelements selected Move Move Pick center point Pick center point Pick radius Pick radius Start angle Start angle Pick start angle Pick start angle Aperture angle Aperture angle Pick aperture Pick aperture %1 toggle global %1 toggle global %1 toggle continue %1 toggle continue %1 pick center %1 pick center %1 pick radius %1 pick radius %1 pick starting angle %1 pick starting angle %1 pick aperture %1 pick aperture Create Circle (Part) Create Circle (Part) Create Circle Create Circle Create Arc (Part) Create Arc (Part) Create Arc Create Arc Pick aperture angle Pick aperture angle Arc by 3 points Arc by 3 points Create Arc by 3 points Create Arc by 3 points Toggle grid Toggle grid Select an object to edit Select an object to edit Select a Draft object to edit Select a Draft object to edit Edit node Edit node No edit point found for selected object No edit point found for selected object Too many objects selected, max number set to: Too many objects selected, max number set to: : this object is not editable : this object is not editable Annotation style editor Annotation style editor Create new style Create new style Style name: Style name: Style name required Style name required No style name specified No style name specified Style exists Style exists This style name already exists This style name already exists Style in use Style in use This style is used by some objects in this document. Are you sure? This style is used by some objects in this document. Are you sure? Rename style Rename style New name: New name: Open styles file Open styles file JSON files (*.json *.JSON) JSON files (*.json *.JSON) JSON file (*.json) JSON file (*.json) Save styles file Save styles file Select an object to project Select an object to project Create Point Create Point Select an object to rotate Select an object to rotate Pick rotation center Pick rotation center Base angle Base angle The base angle you wish to start the rotation from The base angle you wish to start the rotation from Pick base angle Pick base angle Rotation Rotation The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Pick rotation angle Pick rotation angle Add to new group... Add to new group... Add to group Add to group New layer... New layer... Create new layer Create new layer Layer name: Layer name: Layer Object label Layer New layer Lapisan baru Create new group Create new group Group name: Group name: Group Object label Kumpulan New named group New named group Ungroup Ungroup No new selection. You must select non-empty groups or objects inside groups. No new selection. You must select non-empty groups or objects inside groups. Add to construction group Add to construction group Group Kumpulan Flip dimension Flip dimension Fillet radius Fillet radius Radius of fillet Radius of fillet Enter radius. Enter radius. Fillet cannot be created Fillet cannot be created Create fillet Create fillet Polygon Polygon Create Polygon (Part) Create Polygon (Part) Create Polygon Create Polygon Click anywhere on a line to split it. Click anywhere on a line to split it. Split line Split line Select objects to trim or extend Select objects to trim or extend This object is not supported. This object is not supported. Only a single face can be extruded. Only a single face can be extruded. Trimex is not supported yet on this type of object. Trimex is not supported yet on this type of object. Pick distance Pick distance Offset angle Offset angle Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, too many wires Unable to trim these objects, too many wires These objects don't intersect. These objects don't intersect. Too many intersection points. Too many intersection points. B-Spline B-Spline Spline has been closed Spline has been closed Last point has been removed Last point has been removed Create B-spline Create B-spline Change Style Change Style This object does not support possible coincident points, please try again. This object does not support possible coincident points, please try again. Delete point Delete point Add point Add point Open wire Open wire Close wire Close wire Reverse wire Reverse wire Active object must have more than two points/nodes Active object must have more than two points/nodes Open spline Open spline Close spline Close spline Reverse spline Reverse spline Move arc Move arc Set first angle Set first angle Set last angle Set last angle Set radius Set radius Invert arc Invert arc Make sharp Make sharp Make tangent Make tangent Make symmetric Make symmetric Reverse curve Reverse curve Open curve Open curve Close curve Close curve Selection is not a Knot Selection is not a Knot Endpoint of Bézier curve can't be smoothed Endpoint of Bézier curve can't be smoothed Bézier curve Bézier curve Bézier curve has been closed Bézier curve has been closed Create BezCurve Create BezCurve Cubic Bézier curve Cubic Bézier curve Click and drag to define next knot Click and drag to define next knot Ellipse Ellipse Create Ellipse Create Ellipse Pick opposite point Pick opposite point Select faces from existing objects Select faces from existing objects Select an object to scale Select an object to scale Pick base point Pick base point Pick reference distance from base point Pick reference distance from base point Zero scale factor not allowed Zero scale factor not allowed Scale Skala Pick new distance from base point Pick new distance from base point Layer Layer Please select exactly two objects, the base object and the point object, before calling this command. Please select exactly two objects, the base object and the point object, before calling this command. Point array Point array No active Draft Toolbar. No active Draft Toolbar. Construction mode Construction mode Toggle display mode Toggle display mode Create Dimension Create Dimension Create Dimension (radial) Create Dimension (radial) Edge too short! Edge too short! Edges don't intersect! Edges don't intersect! Select an object to stretch Select an object to stretch Pick first point of selection rectangle Pick first point of selection rectangle Pick opposite point of selection rectangle Pick opposite point of selection rectangle Pick start point of displacement Pick start point of displacement Pick end point of displacement Pick end point of displacement Turning one Rectangle into a Wire Turning one Rectangle into a Wire Stretch Stretch Rectangle Segi empat tepat Create Plane Create Plane Create Rectangle Create Rectangle Select an object to mirror Select an object to mirror Pick start point of mirror line Pick start point of mirror line Mirror Mirror Pick end point of mirror line Pick end point of mirror line Path twisted array Path twisted array Select an object to clone Select an object to clone Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them Change slope Change slope Select an object to upgrade Select an object to upgrade Upgrade Upgrade Select an object to offset Select an object to offset Offset only works on one object at a time. Offset only works on one object at a time. Cannot offset this object type Cannot offset this object type Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported Create 2D view Create 2D view Pick ShapeString location point Pick ShapeString location point Create ShapeString Create ShapeString Heal Heal Downgrade Downgrade Task panel: Task panel: Polar array Tatasusunan kutub At least one element must be selected. At least one element must be selected. Selection is not suitable for array. Selection is not suitable for array. Object: Object: Number of elements must be at least 2. Number of elements must be at least 2. The angle is above 360 degrees. It is set to this value to proceed. The angle is above 360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. Fuse: Fuse: Create Link array: Create Link array: Number of elements: Number of elements: Polar angle: Polar angle: Center of rotation: Center of rotation: Orthogonal array Tatasusunan ortogon Number of elements must be at least 1. Number of elements must be at least 1. Number of X elements: Number of X elements: Interval X: Interval X: Number of Y elements: Number of Y elements: Interval Y: Interval Y: Number of Z elements: Number of Z elements: Interval Z: Interval Z: ShapeString ShapeString Default Lalai Circular array Tatasusunan bulat Number of layers must be at least 2. Number of layers must be at least 2. Radial distance is zero. Resulting array may not look correct. Radial distance is zero. Resulting array may not look correct. Radial distance is negative. It is made positive to proceed. Radial distance is negative. It is made positive to proceed. Tangential distance cannot be zero. Tangential distance cannot be zero. Tangential distance is negative. It is made positive to proceed. Tangential distance is negative. It is made positive to proceed. Radial distance: Radial distance: Tangential distance: Tangential distance: Number of circular layers: Number of circular layers: Symmetry parameter: Symmetry parameter: added 'Fuse', 'Justification', 'JustificationReference', 'KeepLeftMargin', 'ObliqueAngle' and 'ScaleToSize' properties added 'Fuse', 'Justification', 'JustificationReference', 'KeepLeftMargin', 'ObliqueAngle' and 'ScaleToSize' properties changed 'Tracking' property type changed 'Tracking' property type Font file not found Font file not found Specified font file is not a file Specified font file is not a file Specified font type is not supported Specified font type is not supported ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: string has no wires ShapeString: string has no wires ShapeString: face creation failed for one character ShapeString: face creation failed for one character added view property 'ScaleMultiplier' added view property 'ScaleMultiplier' added view property 'AnnotationStyle' added view property 'AnnotationStyle' , path object doesn't have 'Edges'. , path object doesn't have 'Edges'. migrated 'PathObj' property to 'PathObject' migrated 'PathObj' property to 'PathObject' migrated 'PathSubs' property to 'PathSubelements' migrated 'PathSubs' property to 'PathSubelements' migrated 'Xlate' property to 'ExtraTranslation' migrated 'Xlate' property to 'ExtraTranslation' added 'Fuse' property added 'Fuse' property added hidden property 'PlacementList' added hidden property 'PlacementList' moved 'Count' property to 'Spacing' subsection moved 'Count' property to 'Spacing' subsection added 'ReversePath', 'SpacingMode', 'SpacingUnit', 'UseSpacingPattern' and 'SpacingPattern' properties added 'ReversePath', 'SpacingMode', 'SpacingUnit', 'UseSpacingPattern' and 'SpacingPattern' properties Start Offset too large for path length. Using zero instead. Start Offset too large for path length. Using zero instead. End Offset too large for path length minus Start Offset. Using zero instead. End Offset too large for path length minus Start Offset. Using zero instead. Spacing unit of 0 is not allowed, using default Spacing unit of 0 is not allowed, using default Operation would generate too many objects. Aborting Operation would generate too many objects. Aborting Length of tangent vector is zero. Copy not aligned. Length of tangent vector is zero. Copy not aligned. Length of normal vector is zero. Using a default axis instead. Length of normal vector is zero. Using a default axis instead. Tangent and normal vectors are parallel. Normal replaced by a default axis. Tangent and normal vectors are parallel. Normal replaced by a default axis. Cannot calculate normal vector. Using the default normal instead. Cannot calculate normal vector. Using the default normal instead. AlignMode {} is not implemented AlignMode {} is not implemented No shape found No shape found All Shapes must be planar All Shapes must be planar Two edges are needed. Two edges are needed. Edges are not connected or radius is too large. Edges are not connected or radius is too large. Points: Points: Wrong input: must be list or tuple of three points exactly. Wrong input: must be list or tuple of three points exactly. Placement: Placement: Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. Wrong input: incorrect type of points. Wrong input: incorrect type of points. Cannot generate shape: Cannot generate shape: Wrong input: base_object not in document. Wrong input: base_object not in document. Wrong input: path_object not in document. Wrong input: path_object not in document. Wrong input: must be a number. Wrong input: must be a number. Wrong input: must be a vector. Wrong input: must be a vector. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be a number or vector. Wrong input: must be a number or vector. Input: single value expanded to vector. Input: single value expanded to vector. Wrong input: must be an integer number. Wrong input: must be an integer number. Input: number of elements must be at least 1. It is set to 1. Input: number of elements must be at least 1. It is set to 1. Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. Wrong input: target_object must not be a list. Wrong input: target_object must not be a list. Wrong input: target_object not in document. Wrong input: target_object not in document. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelement {} not in object. Wrong input: subelement {} not in object. Wrong input: label_type must be a string. Wrong input: label_type must be a string. Wrong input: label_type must be one of the following: Wrong input: label_type must be one of the following: Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: points {} must be a list of at least two vectors. Wrong input: points {} must be a list of at least two vectors. Direction is not 'Custom'; points won't be used. Direction is not 'Custom'; points won't be used. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: point_object not in document. Wrong input: point_object not in document. Wrong input: object has the wrong type. Wrong input: object has the wrong type. This function is deprecated. Do not use this function directly. This function is deprecated. Do not use this function directly. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object not in document. Wrong input: edge_object not in document. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring. Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring. Wrong input: must be an integer. Wrong input: must be an integer. i1: values below 1 are not allowed; will be set to 1. i1: values below 1 are not allowed; will be set to 1. Wrong input: vertex not in object. Wrong input: vertex not in object. i2: values below 1 are not allowed; will be set to the last vertex in the object. i2: values below 1 are not allowed; will be set to the last vertex in the object. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. index: values below 1 are not allowed; will be set to 1. index: values below 1 are not allowed; will be set to 1. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to a circular edge. Wrong input: index doesn't correspond to a circular edge. Wrong input: must be a string, 'radius' or 'diameter'. Wrong input: must be a string, 'radius' or 'diameter'. Wrong input: must be a list with two angles. Wrong input: must be a list with two angles. Wrong input: must be a number or quantity. Wrong input: must be a number or quantity. Layers Layers Wrong input: it must be a string. Wrong input: it must be a string. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be a number between 0 and 100. Wrong input: must be a number between 0 and 100. Activate this layer Activate this layer Reassign properties of layer Reassign properties of layer Select layer contents Select layer contents Reassign properties of all layers Reassign properties of all layers Merge layer duplicates Merge layer duplicates Add new layer Add new layer Edit Sunting Flatten Flatten Upgrade: Unknown force method: Upgrade: Unknown force method: Found 1 block: exploding it Found 1 block: exploding it Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies Downgrade: Unknown force method: Downgrade: Unknown force method: Found 1 array: exploding it Found 1 array: exploding it Found 2 objects: subtracting them Found 2 objects: subtracting them Found several faces: splitting them Found several faces: splitting them Found several faces: subtracting them from the first one Found several faces: subtracting them from the first one Unable to downgrade these objects Unable to downgrade these objects Found 1 face: extracting its wires Found 1 face: extracting its wires Found only wires: extracting their edges Found only wires: extracting their edges No object given No object given The two points are coincident The two points are coincident mirrored mirrored Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it Found 2 objects: fusing them Found 2 objects: fusing them Found groups: closing open wires inside Found groups: closing open wires inside Found meshes: turning them into Part shapes Found meshes: turning them into Part shapes Found object with several coplanar faces: refining them Found object with several coplanar faces: refining them Found 1 non-parametric object: draftifying it Found 1 non-parametric object: draftifying it Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it Found closed wires: creating faces Found closed wires: creating faces Found several wires or edges: wiring them Found several wires or edges: wiring them Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound Unable to upgrade these objects Unable to upgrade these objects Found 1 open wire: closing it Found 1 open wire: closing it Found points: creating compound Found points: creating compound Text Teks added view property 'TextColor' added view property 'TextColor' renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' renamed view property 'TextFont' to 'FontName' renamed view property 'TextFont' to 'FontName' renamed view property 'TextSize' to 'FontSize' renamed view property 'TextSize' to 'FontSize' No Target No Target Invalid label type Invalid label type Tag not available for object Tag not available for object Material not available for object Material not available for object Position not available for (sub)object Position not available for (sub)object Length not available for (sub)object Length not available for (sub)object Area not available for (sub)object Area not available for (sub)object Volume not available for (sub)object Volume not available for (sub)object added property 'Count' added property 'Count' Opening multiple hyperlinks Opening multiple hyperlinks Multiple hyperlinks found. Multiple hyperlinks found. This may lead to the opening of various windows This may lead to the opening of various windows File not found: File not found: Opening hyperlink Opening hyperlink Select 3 vertices, one or more shapes or an object to define a working plane Select 3 vertices, one or more shapes or an object to define a working plane Do you want to update the SVG pattern options of existing objects in all opened documents? Do you want to update the SVG pattern options of existing objects in all opened documents? added 'ExtraPlacement' property added 'ExtraPlacement' property migrated 'PointList' property to 'PointObject' migrated 'PointList' property to 'PointObject' changed 'Group' property type changed 'Group' property type updated view properties updated view properties The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. Sketch is too complex to edit: it is suggested to use the default Sketcher editor Sketch is too complex to edit: it is suggested to use the default Sketcher editor Unable to build Facebinder Unable to build Facebinder No valid faces for Facebinder No valid faces for Facebinder Unable to build Facebinder, resuming with Sew disabled Unable to build Facebinder, resuming with Sew disabled Converting flat B-spline faces of Facebinder to planar faces failed Converting flat B-spline faces of Facebinder to planar faces failed Create layer Create layer Remove from layer Remove from layer Add to new layer... Add to new layer... Add to new layer Add to new layer Add to layer Add to layer Layers change Layers change added 'ForceCompound' property added 'ForceCompound' property Workbench Draft creation tools Draft creation tools Draft annotation tools Draft annotation tools Draft modification tools Draft modification tools Draft utility tools Draft utility tools Draft snap Draft snap &Drafting &Drafting &Annotation & Catatan &Modification &Modification &Utilities &Utilities Arc tools Arc tools Bézier tools Bézier tools Array tools Array tools Draft Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager You must choose a base object before using this command You must choose a base object before using this command Fillet Fillet Delete original objects Delete original objects Create chamfer Create chamfer Save style Save style Name of this new style: Name of this new style: Warning Warning Name exists. Overwrite? Name exists. Overwrite? Error: json module not found. Unable to load style Error: json module not found. Unable to load style Error: json module not found. Unable to save style Error: json module not found. Unable to save style Clone Klon Slope Slope Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction True True False False Scale Skala X factor X factor Y factor Y factor Z factor Z factor Uniform scaling Uniform scaling Working plane orientation Working plane orientation Copy Copy Modify subelements Modify subelements Pick from/to points Pick from/to points Edit scale Edit scale Create a clone Create a clone Point object doesn't have a discrete point, it cannot be used for an array. Point object doesn't have a discrete point, it cannot be used for an array. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. Writing camera position Writing camera position Writing objects shown/hidden state Writing objects shown/hidden state On On Name Nama Line width Lebar garisan Draw style Draw style Line color Warna Garisan Face color Face color Transparency Ketelusan Line print color Line print color New Layer New Layer Custom Custom Label Label Position Position Length Length Area Ruang Volume Isipadu Tag Tag Material Bahan Label + Position Label + Position Label + Length Label + Length Label + Area Label + Area Label + Volume Label + Volume Label + Material Label + Material importOCA OCA: found no data to export OCA: found no data to export successfully exported successfully exported ImportAirfoilDAT Did not find enough coordinates Did not find enough coordinates ImportSVG Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated The export list contains no object with a valid bounding box The export list contains no object with a valid bounding box Draft_SelectPlane Select working plane Select working plane Select 3 vertices, one or more shapes or an object to define a working plane. Select 3 vertices, one or more shapes or an object to define a working plane. Draft_PathArray Path array Path array Creates copies of the selected object along a selected path. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Creates copies of the selected object along a selected path. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Draft_PathLinkArray Path link array Path link array Like the PathArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Like the PathArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Draft_Label Label Label Creates a label, optionally attached to a selected object or subelement. First select a vertex, an edge, or a face of an object, then call this command, and then set the position of the leader line and the textual label. The label will be able to display information about this object, and about the selected subelement, if any. If many objects or many subelements are selected, only the first one in each case will be used to provide information to the label. Creates a label, optionally attached to a selected object or subelement. First select a vertex, an edge, or a face of an object, then call this command, and then set the position of the leader line and the textual label. The label will be able to display information about this object, and about the selected subelement, if any. If many objects or many subelements are selected, only the first one in each case will be used to provide information to the label. Draft_Line Line Line Creates a 2-point line. SHIFT to constrain. Creates a 2-point line. SHIFT to constrain. Draft_Wire Polyline Polyline Creates a multiple-points line (polyline). SHIFT to constrain. Creates a multiple-points line (polyline). SHIFT to constrain. Draft_Hatch Hatch Hatch Creates hatches on the faces of a selected object Creates hatches on the faces of a selected object Draft_Join Join Join Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end for the operation to succeed. Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end for the operation to succeed. Draft_Text Text Teks Creates a multi-line annotation. Creates a multi-line annotation. Draft_Draft2Sketch Draft to sketch Draft to sketch Convert bidirectionally between Draft objects and Sketches. Many Draft objects will be converted into a single non-constrained Sketch. However, a single sketch with disconnected traces will be converted into several individual Draft objects. Convert bidirectionally between Draft objects and Sketches. Many Draft objects will be converted into a single non-constrained Sketch. However, a single sketch with disconnected traces will be converted into several individual Draft objects. Draft_Snap_Lock Snap lock Snap lock Enables or disables snapping globally. Enables or disables snapping globally. Draft_Snap_Midpoint Snap midpoint Snap midpoint Snaps to the midpoint of edges. Snaps to the midpoint of edges. Draft_Snap_Perpendicular Snap perpendicular Snap perpendicular Snaps to the perpendicular points on faces and edges. Snaps to the perpendicular points on faces and edges. Draft_Snap_Grid Snap grid Snap grid Snaps to the intersections of grid lines. Snaps to the intersections of grid lines. Draft_Snap_Intersection Snap intersection Snap intersection Snaps to the intersection of two edges. Snaps to the intersection of two edges. Draft_Snap_Parallel Snap parallel Snap parallel Snaps to an imaginary line parallel to straight edges. Snaps to an imaginary line parallel to straight edges. Draft_Snap_Endpoint Snap endpoint Snap endpoint Snaps to the endpoints of edges. Snaps to the endpoints of edges. Draft_Snap_Angle Snap angle Snap angle Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°. Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°. Draft_Snap_Center Snap center Snap center Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts. Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts. Draft_Snap_Extension Snap extension Snap extension Snaps to an imaginary line that extends beyond the endpoints of straight edges. Snaps to an imaginary line that extends beyond the endpoints of straight edges. Draft_Snap_Near Snap near Snap near Snaps to the nearest point on faces and edges. Snaps to the nearest point on faces and edges. Draft_Snap_Ortho Snap ortho Snap ortho Snaps to imaginary lines that cross the previous point at multiples of 45°. Snaps to imaginary lines that cross the previous point at multiples of 45°. Draft_Snap_Special Snap special Snap special Snaps to special points defined by the object. Snaps to special points defined by the object. Draft_Snap_Dimensions Snap dimensions Snap dimensions Shows temporary X and Y dimensions. Shows temporary X and Y dimensions. Draft_Snap_WorkingPlane Snap working plane Snap working plane Projects snap points onto the current working plane. Projects snap points onto the current working plane. Draft_ShowSnapBar Show snap toolbar Show snap toolbar Shows the snap toolbar if it is hidden. Shows the snap toolbar if it is hidden. Draft_Move Move Move Moves the selected objects. If the "copy" option is active, it will create displaced copies. SHIFT to constrain. Hold ALT and click to create a copy with each click. Moves the selected objects. If the "copy" option is active, it will create displaced copies. SHIFT to constrain. Hold ALT and click to create a copy with each click. Draft_Arc Arc Arka Creates a circular arc by a center point and a radius. SHIFT to constrain. Creates a circular arc by a center point and a radius. SHIFT to constrain. Draft_Arc_3Points Arc by 3 points Arc by 3 points Creates a circular arc by 3 points. SHIFT to constrain. Creates a circular arc by 3 points. SHIFT to constrain. Draft_ArcTools Arc tools Arc tools Create various types of circular arcs. Create various types of circular arcs. Draft_ToggleGrid Toggle grid Toggle grid Toggles the Draft grid on and off. Toggles the Draft grid on and off. Draft_SubelementHighlight Subelement highlight Subelement highlight Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. Draft_Edit Edit Sunting Edits the active object. Press E or ALT + Left Click to display context menu on supported nodes and on supported objects. Edits the active object. Press E or ALT + Left Click to display context menu on supported nodes and on supported objects. Draft_CircularArray Circular array Tatasusunan bulat Creates copies of the selected object, and places the copies in a radial pattern creating various circular layers. The array can be turned into an orthogonal or a polar array by changing its type. Creates copies of the selected object, and places the copies in a radial pattern creating various circular layers. The array can be turned into an orthogonal or a polar array by changing its type. Draft_AnnotationStyleEditor Annotation styles... Annotation styles... Manage or create annotation styles Manage or create annotation styles Draft_Point Point Point Creates a point object. Click anywhere on the 3D view. Creates a point object. Click anywhere on the 3D view. Draft_Rotate Rotate Putar Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. If the "copy" option is active, it will create rotated copies. SHIFT to constrain. Hold ALT and click to create a copy with each click. Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. If the "copy" option is active, it will create rotated copies. SHIFT to constrain. Hold ALT and click to create a copy with each click. Draft_SelectGroup Select group Select group Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. Draft_AutoGroup Autogroup Autogroup Select a layer or group to add new Draft and BIM objects to. Select a layer or group to add new Draft and BIM objects to. Draft_AddConstruction Add to construction group Add to construction group Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it doesn't exist. Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it doesn't exist. Draft_WorkingPlaneProxy Create working plane proxy Create working plane proxy Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. Draft_WireToBSpline Wire to B-spline Wire to B-spline Converts a selected polyline to a B-spline, or a B-spline to a polyline. Converts a selected polyline to a B-spline, or a B-spline to a polyline. Draft_FlipDimension Flip dimension Flip dimension Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Draft_Fillet Fillet Fillet Creates a fillet between two selected wires or edges. Creates a fillet between two selected wires or edges. Draft_SetStyle Set style Set style Sets default styles Sets default styles Draft_Polygon Polygon Polygon Creates a regular polygon (triangle, square, pentagon, ...). SHIFT to constrain Creates a regular polygon (triangle, square, pentagon, ...). SHIFT to constrain Draft_Split Split Split Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. Draft_Trimex Trimex Trimex Trims or extends the selected object, or extrudes single faces. SHIFT constrains to current segment or to normal, ALT inverts. Trims or extends the selected object, or extrudes single faces. SHIFT constrains to current segment or to normal, ALT inverts. Draft_BSpline B-spline B-spline Creates a multiple-point B-spline. SHIFT to constrain. Creates a multiple-point B-spline. SHIFT to constrain. Draft_ApplyStyle Apply current style Apply current style Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. Draft_BezCurve Bézier curve Bézier curve Creates an N-degree Bézier curve. The more points you pick, the higher the degree. SHIFT to constrain. Creates an N-degree Bézier curve. The more points you pick, the higher the degree. SHIFT to constrain. Draft_CubicBezCurve Cubic Bézier curve Cubic Bézier curve Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. SHIFT to constrain. Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. SHIFT to constrain. Draft_BezierTools Bézier tools Bézier tools Create various types of Bézier curves. Create various types of Bézier curves. Draft_Circle Circle Bulatan Creates a circle (full circular arc). Creates a circle (full circular arc). Draft_Ellipse Ellipse Ellipse Creates an ellipse. Creates an ellipse. Draft_Facebinder Facebinder Facebinder Creates a facebinder object from selected faces. Creates a facebinder object from selected faces. Draft_OrthoArray Array Array Creates copies of the selected object, and places the copies in an orthogonal pattern, meaning the copies follow the specified direction in the X, Y, Z axes. The array can be turned into a polar or a circular array by changing its type. Creates copies of the selected object, and places the copies in an orthogonal pattern, meaning the copies follow the specified direction in the X, Y, Z axes. The array can be turned into a polar or a circular array by changing its type. Draft_Scale Scale Skala Scales the selected objects from a base point. SHIFT to constrain. Scales the selected objects from a base point. SHIFT to constrain. Draft_Layer New layer Lapisan baru Adds a layer to the document. Objects added to this layer can share the same visual properties. Adds a layer to the document. Objects added to this layer can share the same visual properties. Draft_PointArray Point array Point array Creates copies of the selected base object at the points of a point object. First select the base object, and then select the point object. Creates copies of the selected base object at the points of a point object. First select the base object, and then select the point object. Draft_PointLinkArray Point link array Point link array Like the PointArray tool, but creates a 'Point link array' instead. A 'Point link array' is more efficient when handling many copies. Like the PointArray tool, but creates a 'Point link array' instead. A 'Point link array' is more efficient when handling many copies. Draft_ArrayTools Array tools Array tools Create various types of arrays, including rectangular, polar, circular, path, and point Create various types of arrays, including rectangular, polar, circular, path, and point Draft_ToggleConstructionMode Toggle construction mode Toggle construction mode Toggles the Construction mode. When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. Toggles the Construction mode. When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. Draft_ToggleDisplayMode Toggle normal/wireframe display Toggle normal/wireframe display Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. Draft_Dimension Dimension Dimensi Creates a dimension. - Pick three points to create a simple linear dimension. - Select a straight line to create a linear dimension linked to that line. - Select an arc or circle to create a radius or diameter dimension linked to that arc. - Select two straight lines to create an angular dimension between them. SHIFT to constrain, E or ALT to select an edge or arc. You may select a single line or single circular arc before launching this command to create the corresponding linked dimension. Creates a dimension. - Pick three points to create a simple linear dimension. - Select a straight line to create a linear dimension linked to that line. - Select an arc or circle to create a radius or diameter dimension linked to that arc. - Select two straight lines to create an angular dimension between them. SHIFT to constrain, E or ALT to select an edge or arc. You may select a single line or single circular arc before launching this command to create the corresponding linked dimension. Draft_Stretch Stretch Stretch Stretches the selected objects. Select an object, then draw a rectangle to pick the vertices that will be stretched, then draw a line to specify the distance and direction of stretching. Stretches the selected objects. Select an object, then draw a rectangle to pick the vertices that will be stretched, then draw a line to specify the distance and direction of stretching. Draft_Rectangle Rectangle Segi empat tepat Creates a 2-point rectangle. Creates a 2-point rectangle. Draft_Mirror Mirror Mirror Mirrors the selected objects along a line defined by two points. Mirrors the selected objects along a line defined by two points. Draft_PathTwistedArray Path twisted array Path twisted array Creates copies of the selected object along a selected path, and twists the copies. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Creates copies of the selected object along a selected path, and twists the copies. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Draft_PathTwistedLinkArray Path twisted link array Path twisted link array Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Draft_Clone Clone Klon Creates a clone of the selected objects. The resulting clone can be scaled in each of its three directions. Creates a clone of the selected objects. The resulting clone can be scaled in each of its three directions. Draft_PolarArray Polar array Tatasusunan kutub Creates copies of the selected object, and places the copies in a polar pattern defined by a center of rotation and its angle. The array can be turned into an orthogonal or a circular array by changing its type. Creates copies of the selected object, and places the copies in a polar pattern defined by a center of rotation and its angle. The array can be turned into an orthogonal or a circular array by changing its type. Draft_Slope Set slope Set slope Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. Draft_Upgrade Upgrade Upgrade Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Draft_Offset Offset Tutup Offsets of the selected object. It can also create an offset copy of the original object. SHIFT to constrain. Hold ALT and click to create a copy with each click. Offsets of the selected object. It can also create an offset copy of the original object. SHIFT to constrain. Hold ALT and click to create a copy with each click. Draft_Shape2DView Shape 2D view Shape 2D view Creates a 2D projection of the selected objects on the XY plane. The initial projection direction is the negative of the current active view direction. You can select individual faces to project, or the entire solid, and also include hidden lines. These projections can be used to create technical drawings with the TechDraw Workbench. Creates a 2D projection of the selected objects on the XY plane. The initial projection direction is the negative of the current active view direction. You can select individual faces to project, or the entire solid, and also include hidden lines. These projections can be used to create technical drawings with the TechDraw Workbench. Draft_ShapeString Shape from text Shape from text Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. Draft_Heal Heal Heal Heal faulty Draft objects saved with an earlier version of the program. If an object is selected it will try to heal that object in particular, otherwise it will try to heal all objects in the active document. Heal faulty Draft objects saved with an earlier version of the program. If an object is selected it will try to heal that object in particular, otherwise it will try to heal all objects in the active document. Draft_Downgrade Downgrade Downgrade Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. App::Property The placement of the base point of the first line The placement of the base point of the first line The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. Text string Text string Font file name Font file name Height of text Height of text Horizontal and vertical alignment Horizontal and vertical alignment Height reference used for justification Height reference used for justification Keep left margin and leading white space when justification is left Keep left margin and leading white space when justification is left Scale to ensure cap height is equal to size Scale to ensure cap height is equal to size Inter-character spacing Inter-character spacing Oblique (slant) angle Oblique (slant) angle Fill letters with faces Fill letters with faces Fuse faces if faces overlap, usually not required (can be very slow) Fuse faces if faces overlap, usually not required (can be very slow) The base object used by this object The base object used by this object The PAT file used by this object The PAT file used by this object The pattern name used by this object The pattern name used by this object The pattern scale used by this object The pattern scale used by this object The pattern rotation used by this object The pattern rotation used by this object If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) The objects included in this clone The objects included in this clone The scale factor of this clone The scale factor of this clone If Clones includes several objects, set True for fusion or False for compound If Clones includes several objects, set True for fusion or False for compound Always create a compound Always create a compound Start angle of the arc Start angle of the arc End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) Radius of the circle Radius of the circle Create a face Create a face The area of this object The area of this object The objects that are part of this layer The objects that are part of this layer Number of faces Number of faces Radius of the control circle Radius of the control circle How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle Radius to use to fillet the corners Radius to use to fillet the corners Size of the chamfer to give to the corners Size of the chamfer to give to the corners The base object that will be duplicated. The base object that will be duplicated. The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. Number of copies to create. Number of copies to create. Rotation factor of the twisted array. Rotation factor of the twisted array. Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) The placement for each array element The placement for each array element The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The placement of the 'Text' element in 3D space The placement of the 'Text' element in 3D space The text to display when 'Label Type' is set to 'Custom' The text to display when 'Label Type' is set to 'Custom' The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like Arch objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like Arch objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. The base object that will be duplicated The base object that will be duplicated List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. Number of copies to create Number of copies to create Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Alignment vector for 'Tangent' mode Alignment vector for 'Tangent' mode Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode Direction of the local Z axis when 'Force Vertical' is true Direction of the local Z axis when 'Force Vertical' is true Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Walk the path backwards. Walk the path backwards. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. Base fixed distance between elements. Base fixed distance between elements. Use repeating spacing patterns instead of uniform spacing. Use repeating spacing patterns instead of uniform spacing. Spacing is multiplied by a corresponding number in this sequence. Spacing is multiplied by a corresponding number in this sequence. Length from the start of the path to the first copy. Length from the start of the path to the first copy. Length from the end of the path to the last copy. Length from the end of the path to the last copy. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circular layers around the base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circular layers around the base object. Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) Number of copies in X direction Number of copies in X direction Number of copies in Y direction Number of copies in Y direction Number of copies in Z direction Number of copies in Z direction Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. Number of copies in the polar direction Number of copies in the polar direction Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction Angle to cover with copies Angle to cover with copies Distance between circular layers Distance between circular layers Distance between copies in the same circular layer Distance between copies in the same circular layer Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Base object that will be duplicated Base object that will be duplicated Object containing points used to distribute the copies. Object containing points used to distribute the copies. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Additional placement, shift and rotation, that will be applied to each copy Additional placement, shift and rotation, that will be applied to each copy The base object this 2D view must represent The base object this 2D view must represent The projection vector of this object The projection vector of this object The way the viewed object must be projected The way the viewed object must be projected The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode Show hidden lines Papar garisan tersembunyi Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments If this is True, this object will include only visible objects If this is True, this object will include only visible objects A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property This object will be recomputed only if this is True. This object will be recomputed only if this is True. The points of the Bezier curve The points of the Bezier curve The degree of the Bezier function The degree of the Bezier function Continuity Continuity If the Bezier curve should be closed or not If the Bezier curve should be closed or not Create a face if this curve is closed Create a face if this curve is closed The length of this object The length of this object The placement of this object The placement of this object X Location X Location Y Location Y Location Z Location Z Location Start angle of the elliptical arc Start angle of the elliptical arc End angle of the elliptical arc (for a full circle, give it same value as First Angle) End angle of the elliptical arc (for a full circle, give it same value as First Angle) Minor radius of the ellipse Minor radius of the ellipse Major radius of the ellipse Major radius of the ellipse Area of this object Area of this object The start point of this line. The start point of this line. The end point of this line. The end point of this line. The length of this line. The length of this line. Radius to use to fillet the corner. Radius to use to fillet the corner. The normal direction of the text of the dimension The normal direction of the text of the dimension The object measured by this dimension object The object measured by this dimension object The object, and specific subelements of it, that this dimension object is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. The object, and specific subelements of it, that this dimension object is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. When measuring circular arcs, it determines whether to display the radius or the diameter value When measuring circular arcs, it determines whether to display the radius or the diameter value Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. Length of the rectangle Length of the rectangle Height of the rectangle Height of the rectangle Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle Linked faces Linked faces Specifies if splitter lines must be removed Specifies if splitter lines must be removed An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces An optional offset value to be applied to all faces An optional offset value to be applied to all faces This specifies if the shapes sew This specifies if the shapes sew The area of the faces of this Facebinder The area of the faces of this Facebinder The components of this block The components of this block The vertices of the wire The vertices of the wire If the wire is closed or not If the wire is closed or not The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The start point of this line The start point of this line The end point of this line The end point of this line The length of this line The length of this line Create a face if this object is closed Create a face if this object is closed The number of subdivisions of each edge The number of subdivisions of each edge The points of the B-spline The points of the B-spline If the B-spline is closed or not If the B-spline is closed or not Create a face if this spline is closed Create a face if this spline is closed Parameterization factor Parameterization factor Force sync pattern placements even when array elements are expanded Force sync pattern placements even when array elements are expanded Show the individual array elements Show the individual array elements Text color Warna teks Line spacing (relative to font size) Line spacing (relative to font size) Vertical alignment Vertical alignment Maximum number of characters on each line of the text box Maximum number of characters on each line of the text box Horizontal alignment Horizontal alignment The type of frame around the text of this object The type of frame around the text of this object Display a leader line or not Display a leader line or not Line width Lebar garisan Line color Warna Garisan Defines an SVG pattern. Defines an SVG pattern. Defines the size of the SVG pattern. Defines the size of the SVG pattern. If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the print color will be used when objects in this layer are placed on a TechDraw page If it is true, the print color will be used when objects in this layer are placed on a TechDraw page The line color of the objects contained within this layer The line color of the objects contained within this layer The shape color of the objects contained within this layer The shape color of the objects contained within this layer The shape appearance of the objects contained within this layer The shape appearance of the objects contained within this layer The line width of the objects contained within this layer The line width of the objects contained within this layer The draw style of the objects contained within this layer The draw style of the objects contained within this layer The transparency of the objects contained within this layer The transparency of the objects contained within this layer The line color of the objects contained within this layer, when used on a TechDraw page The line color of the objects contained within this layer, when used on a TechDraw page Font name Nama fon Font size Font size Spacing between text and dimension line Spacing between text and dimension line Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees Text Position. Leave '(0,0,0)' for automatic position Text Position. Leave '(0,0,0)' for automatic position Text override. Write '$dim' so that it is replaced by the dimension length. Text override. Write '$dim' so that it is replaced by the dimension length. The number of decimals to show The number of decimals to show Show the unit suffix Show the unit suffix A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation Arrow size Saiz Anak Panah Arrow type Jenis Anak Panah Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines Length of the extension lines Panjang garis sambungan Length of the extension line beyond the dimension line Length of the extension line beyond the dimension line Shows the dimension line and arrows Shows the dimension line and arrows The display length of this section plane Panjang pameran pesawat seksyen ini The size of the arrows of this section plane Saiz anak panah dari satah seksyen ini Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) Displays a Dimension symbol at the end of the wire. Displays a Dimension symbol at the end of the wire. Command Transform Berubah Draft_LayerManager Manage layers... Manage layers... Set/modify the different layers of this document Set/modify the different layers of this document QObject Draft Draft Import-Export Import-Export Draft_Hyperlink Open hyperlinks Open hyperlinks Open linked documents Open linked documents Draft_AddToGroup Add to group... Add to group... Adds the selected objects to a group, or removes them from any group. Adds the selected objects to a group, or removes them from any group. Draft_AddNamedGroup New named group New named group Adds a group with a given name. Adds a group with a given name. Draft_AddToLayer Add to layer... Add to layer... Adds the selected objects to a layer, or removes them from any layer. Adds the selected objects to a layer, or removes them from any layer.