Dialog Annotation Styles Editor Užrašų stilių redaktorius Style name Stiliaus pavadinimas The name of your style. Existing style names can be edited. Jūsų stiliaus pavadinimas. Esamus stilių pavadinimus galima redaguoti. Add new... Pridėti naują... Renames the selected style Pakeičia pasirinkto stiliaus pavadinimą Rename Pervardyti Deletes the selected style Pašalina pasirinktą stilių Layers manager Sluoksnių tvarkyklė New Naujas Delete Naikinti Select all Pažymėti visus Toggle on/off Įjungti / išjungti Isolate Izoliuoti Cancel Atšaukti OK Gerai Import styles from json file Stilių importavimas iš json failo Export styles to json file Eksportuoti stilius į json failą The font to use for texts and dimensions The font to use for texts and dimensions Font name Šrifto pavadinimas The font size in system units Šrifto dydis sisteminiais vienetais Lines and arrows Linijos ir rodyklės The width of the lines Linijų plotis px tšk. The type of arrows or markers to use for dimensions and labels Rodyklių ar žymeklių, naudojamų matmenims ir etiketėms žymėti, tipas The size of the arrows or markers in system units Rodyklių arba žymeklių dydis sistemos vienetais The color of lines and arrows Linijų ir rodyklių spalva Line and arrow color Linijos ir rodyklės spalva The distance the dimension line is additionally extended Atstumas, kuriuo papildomai pratęsiama matmenų linija Dimension line overshoot Dimension line overshoot Extension line length Extension line length The distance the extension lines are additionally extended beyond the dimension line Atstumas, kuriuo prailginimo linijos papildomai pratęsiamos už matmenų linijos Font size Šrifto dydis The line spacing for multi-line texts and labels (relative to the font size) Daugiasluoksnių tekstų ir etikečių tarpai tarp eilučių (atsižvelgiant į šrifto dydį) The color of texts, dimension texts and label texts Teksto, matmenų tekstų ir etikečių tekstų spalva Text color Teksto spalva Units Matavimo vienetai A multiplier factor that affects the size of texts and markers A multiplier factor that affects the size of texts and markers Scale multiplier Mastelio daugiklis If it is checked it will show the unit next to the dimension value If it is checked it will show the unit next to the dimension value Show unit Rodyti mato vienetus Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit Nurodykite teisingą ilgio matą, pvz., mm, m, in, ft, kad atvaizduojamas dydis būtų išreikštas nurodytais vienetais Unit override Unit override The number of decimals to show for dimension values The number of decimals to show for dimension values The distance between the dimension text and the dimension line The distance between the dimension text and the dimension line Text spacing Rašmenų protarpis If it is checked it will display the dimension line If it is checked it will display the dimension line Annotations Aprašai Texts Tekstai Line spacing factor Line spacing factor Show dimension line Show dimension line Line width Linijos storis Arrow type Rodyklės rūšis Dot Taškas Circle Apskritimas Arrow Rodyklė Tick Varnelė Tick-2 Tick-2 Arrow size Rodyklės dydis Number of decimals Number of decimals Dimension details Dimension details Extension line overshoot Extension line overshoot The length of the extension lines The length of the extension lines DraftCircularArrayTaskPanel Circular array Circular array Distance from one layer of objects to the next layer of objects. Distance from one layer of objects to the next layer of objects. Radial distance Radial distance Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. Tangential distance Tangential distance Number of circular layers or rings to create, including a copy of the original object. It must be at least 2. Number of circular layers or rings to create, including a copy of the original object. It must be at least 2. Number of circular layers Number of circular layers The number of symmetry lines in the circular array. The number of symmetry lines in the circular array. Symmetry Simetrija The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Center of rotation Sukimosi vidurio taškas X X Y Y Z Z Reset the coordinates of the center of rotation. Reset the coordinates of the center of rotation. Reset point Atstatymo taškas If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Fuse Sąlaja If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Link array Susieti masyvą DraftOrthoArrayTaskPanel Orthogonal array Orthogonal array Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. Number of elements Number of elements X X Y Y Z Z Distance between the elements in the X direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the X direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. X intervals X tarpai Reset the distances. Iš naujo atstatyti atstumus. Reset X Atstatyti X Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the Y direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Y intervals Y tarpai Reset Y Atstatyti Y Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Z intervals Z tarpai Reset Z Atstatyti Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Fuse Sąlaja If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Link array Susieti masyvą DraftPolarArrayTaskPanel Polar array Polar array Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. Polar angle Polar angle Number of elements in the array, including a copy of the original object. It must be at least 2. Number of elements in the array, including a copy of the original object. It must be at least 2. Number of elements Number of elements The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Center of rotation Sukimosi vidurio taškas X X Y Y Z Z Reset the coordinates of the center of rotation. Reset the coordinates of the center of rotation. Reset point Atstatymo taškas If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Fuse Sąlaja If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Link array Susieti masyvą DraftShapeStringGui ShapeString ShapeString X X Enter coordinates or select point with mouse. Enter coordinates or select point with mouse. Y Y Z Z Reset 3D point selection Reset 3D point selection Reset Point Reset Point String Eilutė Text to be made into ShapeString Text to be made into ShapeString Height Aukštis Height of the result Height of the result Font file Šrifto rinkmena Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB) Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB) Form Working plane setup Working plane setup Select 3 vertices, one or more shapes or a WP Proxy. Then confirm by clicking in the 3D view. Or choose one of the options below. Select 3 vertices, one or more shapes or a WP Proxy. Then confirm by clicking in the 3D view. Or choose one of the options below. Sets the working plane to the XY plane (ground plane) Sets the working plane to the XY plane (ground plane) Top (XY) Top (XY) Sets the working plane to the XZ plane (front plane) Sets the working plane to the XZ plane (front plane) Front (XZ) Front (XZ) Sets the working plane to the YZ plane (side plane) Sets the working plane to the YZ plane (side plane) Side (YZ) Side (YZ) Sets the working plane facing the current view Sets the working plane facing the current view Align to view Align to view The working plane will align to the current view each time a command is started The working plane will align to the current view each time a command is started Automatic Automatinis Offset Offset An optional offset to give to the working plane above its base position. Use this together with one of the buttons above An optional offset to give to the working plane above its base position. Use this together with one of the buttons above If this is selected, the working plane will be centered on the current view when pressing one of the buttons above If this is selected, the working plane will be centered on the current view when pressing one of the buttons above Center plane on view Center plane on view Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. The color of the grid The color of the grid Grid color Grid color The distance between grid lines The distance between grid lines The number of squares between major grid lines The number of squares between major grid lines Major lines every Major lines every squares squares The number of squares in the X and Y direction of the grid The number of squares in the X and Y direction of the grid Grid size Tinklelio dydis The distance at which a point can be snapped to The distance at which a point can be snapped to Resets the working plane to its next position Resets the working plane to its next position Next Toliau Move working plane Move working plane Grid spacing Tinklelio langelių dydis Snapping radius Snapping radius Centers the view on the current working plane Centers the view on the current working plane Center view Center view Resets the working plane to its previous position Resets the working plane to its previous position Previous Pirmesnis Style settings Style settings Load preset Load preset Shape Pavidalas Shape appearance Pavidalo išvaizda Ambient shape color Pavidalo aplinkos spalva Emissive shape color Emissive shape color Specular shape color Specular shape color Shape transparency Pavidalo skaidrumas Shape shininess Pavidalo blizgesys Other Kita Line color Linijos spalva Line width Linijos storis px tšk. Draw style Atvaizdavimo būdas Solid Pilnaviduris daiktas Dashed Brūkšninė Dotted Taškinė DashDot Brūkšnelis taškelis Display mode Atvaizdavimo būdas Flat Lines Ištisinė linija Wireframe Rėmelis Shaded Su šešėliais Fill the values below from a stored style preset Fill the values below from a stored style preset Save the current style as a preset... Save the current style as a preset... Point color Taško spalva Point size Taško dydis Points Taškai Shape color Pavidalo spalva Annotations Aprašai Text spacing Rašmenų protarpis Text color Teksto spalva Dimensions Matmenys Dot Taškas Annotation Santrauka Texts Tekstai Line spacing factor Line spacing factor The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Lines and arrows Linijos ir rodyklės Circle Apskritimas Arrow Rodyklė Tick Varnelė Tick-2 Tick-2 If checked, a unit symbol is added to dimension texts If checked, a unit symbol is added to dimension texts The unit override for dimensions. Leave blank to use the current FreeCAD unit. The unit override for dimensions. Leave blank to use the current FreeCAD unit. The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines The color for texts, dimension texts and label texts The color for texts, dimension texts and label texts Font name Šrifto pavadinimas The font for texts, dimensions and labels The font for texts, dimensions and labels Font size Šrifto dydis The height for texts, dimension texts and label texts The height for texts, dimension texts and label texts The line spacing for multi-line texts and labels (relative to the font size) Daugiasluoksnių tekstų ir etikečių tarpai tarp eilučių (atsižvelgiant į šrifto dydį) Scale multiplier Mastelio daugiklis Line and arrow color Linijos ir rodyklės spalva Arrow type Rodyklės rūšis Arrow size Rodyklės dydis Dim line overshoot Dim line overshoot Ext line length Ext line length The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. Ext line overshoot Ext line overshoot The length of extension lines above the dimension line The length of extension lines above the dimension line The space between the dimension line and the dimension text The space between the dimension line and the dimension text Apply the above style to selected object(s) Apply the above style to selected object(s) Apply the above style to all annotations (texts, dimensions and labels) Apply the above style to all annotations (texts, dimensions and labels) Show unit Rodyti mato vienetus Unit override Unit override Selected Pasirinktas Hatch Brūkšniuotė PAT file: PAT rinkmena: Pattern files (*.pat *.PAT) Rašto rinkmenos (*.pat *.PAT) Pattern: Raštas: Scale: Scale: Rotation: Pasukimas: Gui::Dialog::DlgSettingsDraft Default working plane Default working plane General Bendrosios The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. XY (Top) XY (viršus) XZ (Front) XZ (Priekis) YZ (Side) YZ (Šonas) If checked, a widget indicating the current working plane orientation appears when picking points If checked, a widget indicating the current working plane orientation appears when picking points Show working plane tracker Show working plane tracker If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. Include groups in layer list Include groups in layer list Command options Command options If checked, instructions are displayed in the Report view when using Draft commands If checked, instructions are displayed in the Report view when using Draft commands Show prompts in the Report view Show prompts in the Report view If checked, Length input, instead of the X coordinate, will have the initial focus. This allows to indicate a direction and then type a distance. If checked, Length input, instead of the X coordinate, will have the initial focus. This allows to indicate a direction and then type a distance. If checked, base objects, instead of created copies, are selected after copying If checked, base objects, instead of created copies, are selected after copying If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. Create Part primitives if possible Create Part primitives if possible If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. Keep face colors during downgrade/upgrade Keep face colors during downgrade/upgrade If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. Keep face names during downgrade/upgrade Keep face names during downgrade/upgrade This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. Max. number of editable objects Max. number of editable objects Edit node pick radius Edit node pick radius The pick radius of edit nodes The pick radius of edit nodes Label prefix for clones Label prefix for clones The default prefix added to the label of new clones The default prefix added to the label of new clones Construction group label Construction group label The default label for the construction geometry group The default label for the construction geometry group The default color for Draft objects in construction mode The default color for Draft objects in construction mode Internal precision level Vidinis tikslumo lygis Set focus on Length instead of X coordinate Set focus on Length instead of X coordinate Select base objects after copying Select base objects after copying Construction Construction Construction geometry color Construction geometry color Draft classic style Draft classic style Bitsnpieces style Bitsnpieces style Visual Visual SVG patterns SVG patterns SVG pattern size SVG pattern size The default size for SVG patterns. A higher value results in a denser pattern. The default size for SVG patterns. A higher value results in a denser pattern. Additional SVG pattern location Additional SVG pattern location An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns Drawing view line definitions Brėžinio atvaizdo linijų apibrėžimas Dashed line definition Dashed line definition An SVG linestyle definition An SVG linestyle definition Dashdot line definition Dashdot line definition Dotted line definition Dotted line definition Texts and dimensions Texts and dimensions Internal font Vidinis šriftas Font size Šrifto dydis mm mm Number of decimals Number of decimals Extension line overshoot Extension line overshoot Dimension line overshoot Dimension line overshoot Texts Tekstai Font name or family Font name or family The default font for texts, dimensions and labels. It can be a font name such as "Arial", a style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans", or a name with a style such as "Arial:Bold". The default font for texts, dimensions and labels. It can be a font name such as "Arial", a style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans", or a name with a style such as "Arial:Bold". The default height for texts, dimension texts and label texts The default height for texts, dimension texts and label texts Line spacing factor Line spacing factor The default line spacing for multi-line texts and labels (relative to the font size) The default line spacing for multi-line texts and labels (relative to the font size) Scale multiplier Mastelio daugiklis Annotations Aprašai The default annotation scale multiplier. This is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. The default annotation scale multiplier. This is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Text color Teksto spalva The default color for texts, dimension texts and label texts The default color for texts, dimension texts and label texts Lines and arrows Linijos ir rodyklės If checked, the dimension line is displayed by default If checked, the dimension line is displayed by default Show dimension line Show dimension line Line width Linijos storis The default line width The default line width px tšk. Arrow type Rodyklės rūšis The default symbol displayed at the ends of dimension lines The default symbol displayed at the ends of dimension lines Dot Taškas Circle Apskritimas Arrow Rodyklė Tick Varnelė Tick-2 Tick-2 Arrow size Rodyklės dydis The default arrow size The default arrow size Line and arrow color Linijos ir rodyklės spalva The default color for lines and arrows The default color for lines and arrows Units Matavimo vienetai If checked, a unit symbol is added to dimension texts by default If checked, a unit symbol is added to dimension texts by default Show unit Rodyti mato vienetus Unit override Unit override The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. The default number of decimal places for dimension texts The default number of decimal places for dimension texts The optional string inserted between the feet and inches values in dimensions The optional string inserted between the feet and inches values in dimensions Dimension details Dimension details The default distance the dimension line is extended past the extension lines The default distance the dimension line is extended past the extension lines Extension line length Extension line length The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The default length of extension lines above the dimension line The default length of extension lines above the dimension line The default space between the dimension line and the dimension text The default space between the dimension line and the dimension text ShapeStrings ShapeStrings Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB) Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB) Text spacing Rašmenų protarpis Feet separator Feet separator Default ShapeString font file Default ShapeString font file Select a font file Pasirinkite šrifto rinkmeną SVG SVG Import style Įkelti stilių Method chosen for importing SVG object color to FreeCAD Method chosen for importing SVG object color to FreeCAD None (fastest) Joks (greičiausias) Use default color and linewidth Naudoti numatytąją spalvą ir brūkšnio storį Original color and linewidth Originalios spalvos ir tiesių storiai If checked, no units conversion will occur. One unit in the SVG file will translate as one millimeter. If checked, no units conversion will occur. One unit in the SVG file will translate as one millimeter. Disable units scaling Disable units scaling Export style Eksportuoti stilių Style of SVG file to write when exporting a sketch Style of SVG file to write when exporting a sketch Translated (for print & display) Translated (for print & display) Raw (for CAM) Raw (for CAM) All white lines will appear in black in the SVG for better readability against white backgrounds All white lines will appear in black in the SVG for better readability against white backgrounds Translate white line color to black Translate white line color to black Max segment length for discretized arcs Max segment length for discretized arcs Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. OCA OCA Check this if you want the areas (3D faces) to be imported too. Check this if you want the areas (3D faces) to be imported too. Import OCA areas Import OCA areas DXF DXF This preferences dialog will be shown when importing/ exporting DXF files This preferences dialog will be shown when importing/ exporting DXF files Show this dialog when importing and exporting Show this dialog when importing and exporting Python importer is used, otherwise the newer C++ is used. Note: C++ importer is faster, but is not as featureful yet Python importer is used, otherwise the newer C++ is used. Note: C++ importer is faster, but is not as featureful yet Python exporter is used, otherwise the newer C++ is used. Note: C++ exporter is faster, but is not as featureful yet Python exporter is used, otherwise the newer C++ is used. Note: C++ exporter is faster, but is not as featureful yet Allow FreeCAD to download the Python converter for DXF import and export. You can also do this manually by installing the "dxf_library" workbench from the Addon Manager. Allow FreeCAD to download the Python converter for DXF import and export. You can also do this manually by installing the "dxf_library" workbench from the Addon Manager. Allow FreeCAD to automatically download and update the DXF libraries Leisti FreeCAD pačiam atsisiųsti ir atnaujinti DXF bibliotekas Import options Import options Import Įkelti If unchecked, texts and mtexts won't be imported If unchecked, texts and mtexts won't be imported If unchecked, points won't be imported If unchecked, points won't be imported points taškai If checked, paper space objects will be imported too If checked, paper space objects will be imported too If you want the non-named blocks (beginning with a *) to be imported too If you want the non-named blocks (beginning with a *) to be imported too *blocks *blokai Create Sukurti Only standard Part objects will be created (fastest) Only standard Part objects will be created (fastest) Parametric Draft objects will be created whenever possible Parametric Draft objects will be created whenever possible Draft objects Braižyklės dariniai Sketches will be created whenever possible Sketches will be created whenever possible Sketches Braižiniai Scale factor to apply to imported files Mastelis taikomas įkeliamai rinkmenai Scale factor to apply to DXF files on import. The factor is the conversion between the unit of your DXF file and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 Scale factor to apply to DXF files on import. The factor is the conversion between the unit of your DXF file and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 Objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable. Objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable. Project exported objects along current view direction Project exported objects along current view direction FreeCAD will try to join coincident objects into wires. Note that this can take a while! FreeCAD will try to join coincident objects into wires. Note that this can take a while! Colors will set as specified in the DXF file whenever possible. Otherwise default colors will be applied. Colors will set as specified in the DXF file whenever possible. Otherwise default colors will be applied. Automatic update (legacy importer/exporter only) Automatic update (legacy importer/exporter only) Use legacy Python importer Use legacy Python importer Use legacy Python exporter Use legacy Python exporter Some options are not yet available for the new importer Some options are not yet available for the new importer Layouts Layouts Simple Part shapes Simple Part shapes Use colors from the DXF file Use colors from the DXF file Join geometry Apjungti geometriją Group layers into blocks Surinkti sluoksnius į rinkinius Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document Imported texts will get the standard Draft Text size, instead of the size they have in the DXF document Use standard font size for texts Naudoti įprastinį rašmenų dydį If this is checked, DXF layers will be imported as Draft Layers If this is checked, DXF layers will be imported as Draft Layers Hatches will be converted into simple wires Hatches will be converted into simple wires Import hatch boundaries as wires Import hatch boundaries as wires If polylines have a width defined, they will be rendered as closed wires with correct width If polylines have a width defined, they will be rendered as closed wires with correct width Render polylines with width Render polylines with width Some options are not yet available for the new exporter Some options are not yet available for the new exporter Ellipse export is poorly supported. Use this to export them as polylines instead. Elipsių eksportavimas yra nepilnai palaikomas. Pažymėkite, norėdami jas eksportuoti kaip laužtines. Treat ellipses and splines as polylines Laikyti elipses ir glodžiąsias kreives laužtėmis Max Spline Segment: Didžiausias glodžiosios kreivės atkarpos ilgis: Maximum length of each of the polyline segments. If it is set to '0' the whole spline is treated as a straight segment. Maximum length of each of the polyline segments. If it is set to '0' the whole spline is treated as a straight segment. Export options Export options Use layers Use layers All objects containing faces will be exported as 3D polyfaces All objects containing faces will be exported as 3D polyfaces Export 3D objects as polyface meshes Export 3D objects as polyface meshes TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. Export TechDraw Views as blocks Export TechDraw Views as blocks Exported objects will be projected to reflect the current view direction Exported objects will be projected to reflect the current view direction Grid and snapping Tinklelis ir kibimas Shift Shift Always snap Always snap If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. Major lines every Major lines every The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. squares squares The number of squares in the X and Y direction of the grid The number of squares in the X and Y direction of the grid Snap modifier Snap modifier The Snap modifier key The Snap modifier key Ctrl Ctrl Alt Alt Constrain modifier Constrain modifier The Constrain modifier key The Constrain modifier key Alt modifier Alt modifier The Alt modifier key. The function of this key depends on the command. The Alt modifier key. The function of this key depends on the command. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. The distance between grid lines The distance between grid lines The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time Only show the Draft snap toolbar during commands Only show the Draft snap toolbar during commands Grid Tinklelis Always show the grid Visada rodyti tinklelį If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. Show the grid during commands Show the grid during commands If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner Show grid border Show grid border Show human figure Show human figure If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system Use colored axes Use colored axes Grid spacing Tinklelio langelių dydis Grid size Tinklelio dydis Grid transparency Grid transparency % % Grid color Grid color Snapping and modifier keys Snapping and modifier keys Snap symbol style Snap symbol style Mouse delay Mouse delay seconds seconds The style for snap symbols The style for snap symbols Snap symbol color Snap symbol color The color for snap symbols The color for snap symbols If checked, snapping is activated without the need to press the Snap modifier key If checked, snapping is activated without the need to press the Snap modifier key The color of the grid The color of the grid The overall transparency of the grid The overall transparency of the grid DWG DWG DWG conversion DWG conversion Conversion method: Conversion method: This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. Automatic Automatinis LibreDWG LibreDWG ODA Converter ODA Converter QCAD pro QCAD pro Path to file converter Path to file converter The path to your DWG file converter executable The path to your DWG file converter executable <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF parinktys taip pat taikomos ir DWG rūšies rinkmenoms.</p></body></html> Relative Relative R R Continue Tęsti Close Užverti O O Copy Kopijuoti Fill Užpildyti L L Interface Interface In-command shortcuts In-command shortcuts F F Select edge Select edge Subelement mode Subelement mode B B C C Exit Baigti A A Increase radius Padidinti spindulį Decrease radius Sumažinti spindulį UI options UI options If checked, the Draft snap toolbar will only be visible during commands If checked, the Draft snap toolbar will only be visible during commands Show the Snap widget in the Draft Workbench Show the Snap widget in the Draft Workbench Show the Annotation scale widget in the Draft Workbench Show the Annotation scale widget in the Draft Workbench E E Q Q Length Ilgis Wipe Išvalyti W W U U Global Bendras G G Undo Atšaukti N N Cycle snap Cycle snap Add hold Add hold Set working plane Set working plane Snap Pritraukimas S S Restrict X Apriboti X X X Restrict Y Apriboti Y Y Y Restrict Z Apriboti Z Z Z If checked, the Snap widget is displayed in the Draft status bar If checked, the Snap widget is displayed in the Draft status bar If checked, the Annotation scale widget is displayed in the Draft status bar If checked, the Annotation scale widget is displayed in the Draft status bar draft Relative Relative Global Bendras Continue Tęsti Close Užverti Copy Kopijuoti Subelement mode Subelement mode Fill Užpildyti Exit Baigti Snap On/Off Snap On/Off Increase snap radius Increase snap radius Decrease snap radius Decrease snap radius Restrict X Apriboti X Restrict Y Apriboti Y Restrict Z Apriboti Z Select edge Select edge Add custom snap point Add custom snap point Length mode Length mode Wipe Išvalyti Set Working Plane Set Working Plane Cycle snap object Cycle snap object Undo last segment Undo last segment Top Iš viršaus Front Iš priekio Side Siena Auto Automatiškai Current working plane: Current working plane: Selected shapes do not define a plane Selected shapes do not define a plane No previous working plane No previous working plane No next working plane No next working plane Axes: Ašys: Position: Padėtis: None Joks active command: active command: Active Draft command Active Draft command X coordinate of next point X coordinate of next point X X Y Y Z Z Y coordinate of next point Y coordinate of next point Z coordinate of next point Z coordinate of next point Enter point Enter point Enter a new point with the given coordinates Enter a new point with the given coordinates Length Ilgis Angle Kampas Length of current segment Length of current segment Angle of current segment Angle of current segment Check this to lock the current angle Check this to lock the current angle Radius Spindulys Radius of Circle Apskritimo spindulys Coordinates relative to last point or to coordinate system origin if is the first point to set Coordinates relative to last point or to coordinate system origin if is the first point to set Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Filled Filled Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled Finish Užbaigti Finishes the current drawing or editing operation Finishes the current drawing or editing operation If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset OCC-style offset OCC-style offset Undo Atšaukti If checked, objects will be copied instead of moved If checked, objects will be copied instead of moved Undo the last segment Undo the last segment Finishes and closes the current line Finishes and closes the current line Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point Set WP Set WP Reorients the working plane on the last segment Reorients the working plane on the last segment Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension Sides Pusės Number of sides Number of sides Modify subelements Modify subelements If checked, subelements will be modified instead of entire objects If checked, subelements will be modified instead of entire objects Create text Create text Press this button to create the text object, or finish your text with two blank lines Press this button to create the text object, or finish your text with two blank lines Change default style for new objects Change default style for new objects Toggle construction mode Toggle construction mode Autogroup off Autogroup off Line Atkarpa DWire Brėžinio viela Circle Apskritimas Arc Lankas Rotate Vartyti Point Taškas Label Žymė Label type Label type Offset Offset Distance Distance Offset distance Offset distance Trimex Trimex Local {} Local {} Global {} Global {} Autogroup: Autogroup: Modify objects Modify objects Faces Sienos Remove Pašalinti Add Pridėti Facebinder elements Facebinder elements Draft Pratempti Converting: Converting: Conversion successful Conversion successful LibreDWG converter not found LibreDWG converter not found ODA converter not found ODA converter not found QCAD converter not found QCAD converter not found No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. All Shapes must be coplanar All Shapes must be coplanar Selected Shapes must define a plane Selected Shapes must define a plane Custom Pasirinktinė Unable to convert input into a scale factor Unable to convert input into a scale factor Set custom scale Set custom scale Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x Draft scale widget Draft scale widget Set the scale used by draft annotation tools Set the scale used by draft annotation tools Draft snap widget Draft snap widget No active document. Aborting. No active document. Aborting. Wrong input: object {} not in document. Wrong input: object {} not in document. Unable to insert new object into a scaled part Unable to insert new object into a scaled part Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. image is Null image is Null filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file unable to load texture unable to load texture Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. Solids: Solids: Faces: Sienos: Wires: Wires: Edges: Edges: Vertices: Vertices: Face Siena Wire Laužtė different types different types Objects have different placements. Distance between the two base points: Objects have different placements. Distance between the two base points: This function will be deprecated in {}. Please use '{}'. This function will be deprecated in {}. Please use '{}'. This function will be deprecated. Please use '{}'. This function will be deprecated. Please use '{}'. has a different value has a different value doesn't exist in one of the objects doesn't exist in one of the objects %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. %s cannot be modified because its placement is readonly. %s cannot be modified because its placement is readonly. Wrong input: unknown document {} Wrong input: unknown document {} Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. Path array Path array Pick target point Pick target point Create Label Create Label Pick endpoint of leader line Pick endpoint of leader line Pick text position Pick text position Pick first point Pick first point Create Line Create Line Create Wire Create Wire Polyline Polyline Pick next point Pick next point Unable to create a Wire from selected objects Unable to create a Wire from selected objects Convert to Wire Convert to Wire Select an object to join Select an object to join Join lines Join lines Only Draft Lines and Wires can be joined Only Draft Lines and Wires can be joined Selection: Atranka: Pick location point Pick location point Create Text Create Text Select an object to convert. Select an object to convert. Convert to Sketch Convert to Sketch Convert to Draft Convert to Draft Convert Draft/Sketch Convert Draft/Sketch Select an object to move Select an object to move Pick start point Pick start point Pick end point Pick end point Move Perkelti Some subelements could not be moved. Some subelements could not be moved. Pick center point Pick center point Pick radius Parinkti spindulį Start angle Start angle Pick start angle Pick start angle Aperture angle Aperture angle Pick aperture Pick aperture Create Circle (Part) Create Circle (Part) Create Circle Create Circle Create Arc (Part) Create Arc (Part) Create Arc Create Arc Pick aperture angle Pick aperture angle Arc by 3 points Arc by 3 points Create Arc by 3 points Create Arc by 3 points Toggle grid Toggle grid Select an object to edit Select an object to edit Select a Draft object to edit Select a Draft object to edit Edit node Edit node No edit point found for selected object No edit point found for selected object Too many objects selected, max number set to: Too many objects selected, max number set to: : this object is not editable : this object is not editable Annotation style editor Annotation style editor Create new style Create new style Style name: Style name: Style name required Style name required No style name specified No style name specified Style exists Style exists This style name already exists This style name already exists Style in use Style in use This style is used by some objects in this document. Are you sure? This style is used by some objects in this document. Are you sure? Rename style Rename style New name: New name: Open styles file Open styles file JSON files (*.json *.JSON) JSON files (*.json *.JSON) JSON file (*.json) JSON file (*.json) Save styles file Save styles file Select an object to project Select an object to project Create Point Create Point Select an object to rotate Select an object to rotate Pick rotation center Pick rotation center Base angle Base angle The base angle you wish to start the rotation from The base angle you wish to start the rotation from Pick base angle Pick base angle Rotation Rotation The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Pick rotation angle Pick rotation angle Add to group Add to group Ungroup Ungroup Add new group Add new group Select group Select group No new selection. You must select non-empty groups or objects inside groups. No new selection. You must select non-empty groups or objects inside groups. Autogroup Autogroup Add new Layer Add new Layer Add to construction group Add to construction group Add a new group with a given name Add a new group with a given name Add group Add group Group name Group name Group Grupė Flip dimension Flip dimension Fillet radius Užapvalinimo spindulys Radius of fillet Krašto užapvalinimo spindulys Enter radius. Įvesti spindulį. Fillet cannot be created Fillet cannot be created Create fillet Užapvalinti kampą Polygon Daugiakampis Create Polygon (Part) Create Polygon (Part) Create Polygon Create Polygon Click anywhere on a line to split it. Click anywhere on a line to split it. Split line Split line Select objects to trim or extend Select objects to trim or extend This object is not supported. This object is not supported. Only a single face can be extruded. Only a single face can be extruded. Trimex is not supported yet on this type of object. Trimex is not supported yet on this type of object. Pick distance Pick distance Offset angle Offset angle Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, only Draft wires and arcs are supported. Unable to trim these objects, too many wires Unable to trim these objects, too many wires These objects don't intersect. These objects don't intersect. Too many intersection points. Too many intersection points. B-Spline B-Spline Spline has been closed Spline has been closed Last point has been removed Last point has been removed Create B-spline Nubrėžti B-splainą Change Style Change Style This object does not support possible coincident points, please try again. This object does not support possible coincident points, please try again. Delete point Delete point Add point Add point Open wire Open wire Close wire Uždaryti laužtę Reverse wire Reverse wire Active object must have more than two points/nodes Active object must have more than two points/nodes Open spline Open spline Close spline Close spline Reverse spline Reverse spline Move arc Move arc Set first angle Set first angle Set last angle Set last angle Set radius Nustatyti spindulį Invert arc Invert arc Make sharp Make sharp Make tangent Make tangent Make symmetric Make symmetric Reverse curve Reverse curve Open curve Open curve Close curve Close curve Selection is not a Knot Selection is not a Knot Endpoint of Bézier curve can't be smoothed Endpoint of Bézier curve can't be smoothed Bézier curve Bézier curve Bézier curve has been closed Bézier curve has been closed Create BezCurve Create BezCurve Cubic Bézier curve Cubic Bézier curve Click and drag to define next knot Click and drag to define next knot Ellipse Elipsė Create Ellipse Create Ellipse Pick opposite point Pick opposite point Select faces from existing objects Select faces from existing objects Select an object to scale Select an object to scale Pick base point Pick base point Pick reference distance from base point Pick reference distance from base point Scale Mastelis Some subelements could not be scaled. Some subelements could not be scaled. Unable to scale object: Unable to scale object: Unable to scale objects: Unable to scale objects: This object type cannot be scaled directly. Please use the clone method. This object type cannot be scaled directly. Please use the clone method. Pick new distance from base point Pick new distance from base point Layer Sluoksnis Please select exactly two objects, the base object and the point object, before calling this command. Please select exactly two objects, the base object and the point object, before calling this command. Point array Point array No active Draft Toolbar. No active Draft Toolbar. Construction mode Construction mode Toggle display mode Perjungti atvaizdavimo būdą Dimension Matmuo Create Dimension Create Dimension Create Dimension (radial) Create Dimension (radial) Edge too short! Edge too short! Edges don't intersect! Edges don't intersect! Select an object to stretch Select an object to stretch Pick first point of selection rectangle Pick first point of selection rectangle Pick opposite point of selection rectangle Pick opposite point of selection rectangle Pick start point of displacement Pick start point of displacement Pick end point of displacement Pick end point of displacement Turning one Rectangle into a Wire Turning one Rectangle into a Wire Stretch Stretch Rectangle Stačiakampis Create Plane Create Plane Create Rectangle Create Rectangle Select an object to mirror Select an object to mirror Pick start point of mirror line Pick start point of mirror line Mirror Mirror Pick end point of mirror line Pick end point of mirror line Path twisted array Path twisted array Select an object to clone Select an object to clone Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them Change slope Change slope Select an object to upgrade Select an object to upgrade Upgrade Upgrade Select an object to offset Select an object to offset Offset only works on one object at a time. Offset only works on one object at a time. Cannot offset this object type Cannot offset this object type Offset of Bezier curves is currently not supported Offset of Bezier curves is currently not supported Create 2D view Create 2D view Pick ShapeString location point Pick ShapeString location point Create ShapeString Create ShapeString Heal Taisyti Downgrade Downgrade Task panel: Task panel: Polar array Polar array At least one element must be selected. At least one element must be selected. Selection is not suitable for array. Selection is not suitable for array. Object: Object: Number of elements must be at least 2. Number of elements must be at least 2. The angle is above 360 degrees. It is set to this value to proceed. The angle is above 360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. Fuse: Sąlaja: Create Link array: Create Link array: Number of elements: Number of elements: Polar angle: Polar angle: Center of rotation: Center of rotation: Orthogonal array Orthogonal array Number of elements must be at least 1. Number of elements must be at least 1. Number of X elements: Number of X elements: Interval X: Interval X: Number of Y elements: Number of Y elements: Interval Y: Interval Y: Number of Z elements: Number of Z elements: Interval Z: Interval Z: ShapeString ShapeString Default Numatytasis Circular array Circular array Number of layers must be at least 2. Number of layers must be at least 2. Radial distance is zero. Resulting array may not look correct. Radial distance is zero. Resulting array may not look correct. Radial distance is negative. It is made positive to proceed. Radial distance is negative. It is made positive to proceed. Tangential distance cannot be zero. Tangential distance cannot be zero. Tangential distance is negative. It is made positive to proceed. Tangential distance is negative. It is made positive to proceed. Radial distance: Radial distance: Tangential distance: Tangential distance: Number of circular layers: Number of circular layers: Symmetry parameter: Symmetry parameter: added 'Fuse', 'Justification', 'JustificationReference', 'KeepLeftMargin', 'ObliqueAngle' and 'ScaleToSize' properties added 'Fuse', 'Justification', 'JustificationReference', 'KeepLeftMargin', 'ObliqueAngle' and 'ScaleToSize' properties changed 'Tracking' property type changed 'Tracking' property type ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: string has no wires ShapeString: string has no wires ShapeString: face creation failed for one character ShapeString: face creation failed for one character added view property 'ScaleMultiplier' added view property 'ScaleMultiplier' added view property 'AnnotationStyle' added view property 'AnnotationStyle' , path object doesn't have 'Edges'. , path object doesn't have 'Edges'. migrated 'PathObj' property to 'PathObject' migrated 'PathObj' property to 'PathObject' migrated 'PathSubs' property to 'PathSubelements' migrated 'PathSubs' property to 'PathSubelements' migrated 'Xlate' property to 'ExtraTranslation' migrated 'Xlate' property to 'ExtraTranslation' added 'Fuse' property added 'Fuse' property Start Offset too large for path length. Using zero instead. Start Offset too large for path length. Using zero instead. End Offset too large for path length minus Start Offset. Using zero instead. End Offset too large for path length minus Start Offset. Using zero instead. Length of tangent vector is zero. Copy not aligned. Length of tangent vector is zero. Copy not aligned. Length of normal vector is zero. Using a default axis instead. Length of normal vector is zero. Using a default axis instead. Tangent and normal vectors are parallel. Normal replaced by a default axis. Tangent and normal vectors are parallel. Normal replaced by a default axis. Cannot calculate normal vector. Using the default normal instead. Cannot calculate normal vector. Using the default normal instead. AlignMode {} is not implemented AlignMode {} is not implemented No shape found No shape found All Shapes must be planar All Shapes must be planar Two edges are needed. Two edges are needed. Edges are not connected or radius is too large. Edges are not connected or radius is too large. Points: Points: Wrong input: must be list or tuple of three points exactly. Wrong input: must be list or tuple of three points exactly. Placement: Padėtis: Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. Wrong input: incorrect type of points. Wrong input: incorrect type of points. Cannot generate shape: Cannot generate shape: Wrong input: base_object not in document. Wrong input: base_object not in document. Wrong input: path_object not in document. Wrong input: path_object not in document. Wrong input: must be a number. Wrong input: must be a number. Wrong input: must be a vector. Wrong input: must be a vector. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be a number or vector. Wrong input: must be a number or vector. Input: single value expanded to vector. Input: single value expanded to vector. Wrong input: must be an integer number. Wrong input: must be an integer number. Input: number of elements must be at least 1. It is set to 1. Input: number of elements must be at least 1. It is set to 1. Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. Wrong input: target_object must not be a list. Wrong input: target_object must not be a list. Wrong input: target_object not in document. Wrong input: target_object not in document. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelement {} not in object. Wrong input: subelement {} not in object. Wrong input: label_type must be a string. Wrong input: label_type must be a string. Wrong input: label_type must be one of the following: Wrong input: label_type must be one of the following: Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: points {} must be a list of at least two vectors. Wrong input: points {} must be a list of at least two vectors. Direction is not 'Custom'; points won't be used. Direction is not 'Custom'; points won't be used. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: point_object not in document. Wrong input: point_object not in document. Wrong input: object has the wrong type. Wrong input: object has the wrong type. This function is deprecated. Do not use this function directly. This function is deprecated. Do not use this function directly. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object not in document. Wrong input: edge_object not in document. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring. Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring. Wrong input: must be an integer. Wrong input: must be an integer. i1: values below 1 are not allowed; will be set to 1. i1: values below 1 are not allowed; will be set to 1. Wrong input: vertex not in object. Wrong input: vertex not in object. i2: values below 1 are not allowed; will be set to the last vertex in the object. i2: values below 1 are not allowed; will be set to the last vertex in the object. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. index: values below 1 are not allowed; will be set to 1. index: values below 1 are not allowed; will be set to 1. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to a circular edge. Wrong input: index doesn't correspond to a circular edge. Wrong input: must be a string, 'radius' or 'diameter'. Netinkamas įvestis: turi būti eilutės tipo, 'spindulys' arba 'skersmuo'. Wrong input: must be a list with two angles. Wrong input: must be a list with two angles. Wrong input: must be a number or quantity. Wrong input: must be a number or quantity. Layers Layers Wrong input: it must be a string. Wrong input: it must be a string. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be a number between 0 and 100. Wrong input: must be a number between 0 and 100. Activate this layer Activate this layer Select layer contents Select layer contents Merge layer duplicates Merge layer duplicates Add new layer Add new layer Edit Taisyti Flatten Flatten Upgrade: Unknown force method: Upgrade: Unknown force method: Found 1 block: exploding it Found 1 block: exploding it Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies Found 2 objects: subtracting them Found 2 objects: subtracting them Found several faces: splitting them Found several faces: splitting them Found several objects: subtracting them from the first one Found several objects: subtracting them from the first one Found 1 face: extracting its wires Found 1 face: extracting its wires Found only wires: extracting their edges Found only wires: extracting their edges No more downgrade possible No more downgrade possible No object given No object given The two points are coincident The two points are coincident mirrored mirrored Object must be a closed shape Object must be a closed shape No solid object created No solid object created Faces must be coplanar to be refined Faces must be coplanar to be refined Found groups: closing each open object inside Found groups: closing each open object inside Found meshes: turning into Part shapes Found meshes: turning into Part shapes Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it Found 2 objects: fusing them Found 2 objects: fusing them Found object with several coplanar faces: refine them Found object with several coplanar faces: refine them Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it Found closed wires: creating faces Found closed wires: creating faces Found several wires or edges: wiring them Found several wires or edges: wiring them Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound trying: closing it trying: closing it Found 1 open wire: closing it Found 1 open wire: closing it Found 1 object: draftifying it Found 1 object: draftifying it Found points: creating compound Found points: creating compound Unable to upgrade these objects. Unable to upgrade these objects. Text Tekstas added view property 'TextColor' added view property 'TextColor' renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' renamed view property 'TextFont' to 'FontName' renamed view property 'TextFont' to 'FontName' renamed view property 'TextSize' to 'FontSize' renamed view property 'TextSize' to 'FontSize' No Target No Target Invalid label type Invalid label type Tag not available for object Tag not available for object Material not available for object Material not available for object Position not available for (sub)object Position not available for (sub)object Length not available for (sub)object Length not available for (sub)object Area not available for (sub)object Area not available for (sub)object Volume not available for (sub)object Volume not available for (sub)object added property 'Count' added property 'Count' Opening multiple hyperlinks Opening multiple hyperlinks Multiple hyperlinks found. Multiple hyperlinks found. This may lead to the opening of various windows This may lead to the opening of various windows File not found: File not found: Opening hyperlink Opening hyperlink Select 3 vertices, one or more shapes or an object to define a working plane Select 3 vertices, one or more shapes or an object to define a working plane Do you want to update the SVG pattern options of existing objects in all opened documents? Do you want to update the SVG pattern options of existing objects in all opened documents? added 'ExtraPlacement' property added 'ExtraPlacement' property migrated 'PointList' property to 'PointObject' migrated 'PointList' property to 'PointObject' changed 'Group' property type changed 'Group' property type updated view properties updated view properties The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. Sketch is too complex to edit: it is suggested to use the default Sketcher editor Sketch is too complex to edit: it is suggested to use the default Sketcher editor Unable to build Facebinder Unable to build Facebinder No valid faces for Facebinder No valid faces for Facebinder Unable to build Facebinder, resuming with Sew disabled Unable to build Facebinder, resuming with Sew disabled Converting flat B-spline faces of Facebinder to planar faces failed Converting flat B-spline faces of Facebinder to planar faces failed Workbench Draft creation tools Draft creation tools Draft annotation tools Draft annotation tools Draft modification tools Draft modification tools Draft utility tools Draft utility tools Draft snap Draft snap &Drafting &Drafting &Annotation &Aprašas &Modification &Modification &Utilities &Utilities Arc tools Arc tools Bézier tools Bézier tools Array tools Array tools Draft Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager You must choose a base object before using this command You must choose a base object before using this command Fillet Kraštų suapvalinimas Delete original objects Delete original objects Create chamfer Create chamfer Save style Save style Name of this new style: Name of this new style: Warning Warning Name exists. Overwrite? Name exists. Overwrite? Error: json module not found. Unable to load style Error: json module not found. Unable to load style Error: json module not found. Unable to save style Error: json module not found. Unable to save style Clone Klonuoti Slope Nuolydis Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction True Tiesa False Netiesta Scale Mastelis X factor X factor Y factor Y factor Z factor Z factor Uniform scaling Uniform scaling Working plane orientation Working plane orientation Copy Kopijuoti Modify subelements Modify subelements Pick from/to points Pick from/to points Create a clone Kurti kloną Point object doesn't have a discrete point, it cannot be used for an array. Point object doesn't have a discrete point, it cannot be used for an array. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. Writing camera position Writing camera position Writing objects shown/hidden state Writing objects shown/hidden state On Įjungta Name Pavadinimas Line width Linijos storis Draw style Atvaizdavimo būdas Line color Linijos spalva Face color Face color Transparency Skaidrumas Line print color Line print color New Layer New Layer Custom Pasirinktinė Label Žymė Position Vieta Length Ilgis Area Plotas Volume Tūris Tag Žymė Material Medžiaga Label + Position Label + Position Label + Length Label + Length Label + Area Label + Area Label + Volume Label + Volume Label + Material Label + Material importOCA OCA: found no data to export OCA: found no data to export successfully exported successfully exported ImportAirfoilDAT Did not find enough coordinates Did not find enough coordinates ImportSVG Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated The export list contains no object with a valid bounding box Eksportuojamas sąrašas neturi daiktų su tinkamais ribiniais matmenimis Draft_SelectPlane Select plane Pasirinkti plokštumą Select 3 vertices, one or more shapes or an object to define a working plane. Select 3 vertices, one or more shapes or an object to define a working plane. Draft_PathArray Path array Path array Creates copies of the selected object along a selected path. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Creates copies of the selected object along a selected path. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Draft_PathLinkArray Path link array Path link array Like the PathArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Like the PathArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Draft_Label Label Žymė Creates a label, optionally attached to a selected object or subelement. First select a vertex, an edge, or a face of an object, then call this command, and then set the position of the leader line and the textual label. The label will be able to display information about this object, and about the selected subelement, if any. If many objects or many subelements are selected, only the first one in each case will be used to provide information to the label. Creates a label, optionally attached to a selected object or subelement. First select a vertex, an edge, or a face of an object, then call this command, and then set the position of the leader line and the textual label. The label will be able to display information about this object, and about the selected subelement, if any. If many objects or many subelements are selected, only the first one in each case will be used to provide information to the label. Draft_Line Line Atkarpa Creates a 2-point line. CTRL to snap, SHIFT to constrain. Creates a 2-point line. CTRL to snap, SHIFT to constrain. Draft_Wire Polyline Polyline Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Draft_Hatch Hatch Hatch Creates hatches on the faces of a selected object Creates hatches on the faces of a selected object Draft_Join Join Apjungti Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end for the operation to succeed. Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end for the operation to succeed. Draft_Text Text Tekstas Creates a multi-line annotation. CTRL to snap. Creates a multi-line annotation. CTRL to snap. Draft_Draft2Sketch Draft to sketch Draft to sketch Convert bidirectionally between Draft objects and Sketches. Many Draft objects will be converted into a single non-constrained Sketch. However, a single sketch with disconnected traces will be converted into several individual Draft objects. Convert bidirectionally between Draft objects and Sketches. Many Draft objects will be converted into a single non-constrained Sketch. However, a single sketch with disconnected traces will be converted into several individual Draft objects. Draft_Snap_Lock Snap lock Snap lock Enables or disables snapping globally. Enables or disables snapping globally. Draft_Snap_Midpoint Snap midpoint Snap midpoint Snaps to the midpoint of edges. Snaps to the midpoint of edges. Draft_Snap_Perpendicular Snap perpendicular Snap perpendicular Snaps to the perpendicular points on faces and edges. Snaps to the perpendicular points on faces and edges. Draft_Snap_Grid Snap grid Snap grid Snaps to the intersections of grid lines. Snaps to the intersections of grid lines. Draft_Snap_Intersection Snap intersection Snap intersection Snaps to the intersection of two edges. Snaps to the intersection of two edges. Draft_Snap_Parallel Snap parallel Snap parallel Snaps to an imaginary line parallel to straight edges. Snaps to an imaginary line parallel to straight edges. Draft_Snap_Endpoint Snap endpoint Snap endpoint Snaps to the endpoints of edges. Snaps to the endpoints of edges. Draft_Snap_Angle Snap angle Snap angle Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°. Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°. Draft_Snap_Center Snap center Snap center Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts. Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts. Draft_Snap_Extension Snap extension Snap extension Snaps to an imaginary line that extends beyond the endpoints of straight edges. Snaps to an imaginary line that extends beyond the endpoints of straight edges. Draft_Snap_Near Snap near Snap near Snaps to the nearest point on faces and edges. Snaps to the nearest point on faces and edges. Draft_Snap_Ortho Snap ortho Snap ortho Snaps to imaginary lines that cross the previous point at multiples of 45°. Snaps to imaginary lines that cross the previous point at multiples of 45°. Draft_Snap_Special Snap special Snap special Snaps to special points defined by the object. Snaps to special points defined by the object. Draft_Snap_Dimensions Snap dimensions Snap dimensions Shows temporary X and Y dimensions. Shows temporary X and Y dimensions. Draft_Snap_WorkingPlane Snap working plane Snap working plane Projects snap points onto the current working plane. Projects snap points onto the current working plane. Draft_ShowSnapBar Show snap toolbar Show snap toolbar Shows the snap toolbar if it is hidden. Shows the snap toolbar if it is hidden. Draft_Move Move Perkelti Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. Draft_Arc Arc Lankas Creates a circular arc by a center point and a radius. CTRL to snap, SHIFT to constrain. Creates a circular arc by a center point and a radius. CTRL to snap, SHIFT to constrain. Draft_Arc_3Points Arc by 3 points Arc by 3 points Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Draft_ArcTools Arc tools Arc tools Create various types of circular arcs. Create various types of circular arcs. Draft_ToggleGrid Toggle grid Toggle grid Toggles the Draft grid on and off. Toggles the Draft grid on and off. Draft_SubelementHighlight Subelement highlight Subelement highlight Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. Draft_Edit Edit Taisyti Edits the active object. Press E or ALT + Left Click to display context menu on supported nodes and on supported objects. Edits the active object. Press E or ALT + Left Click to display context menu on supported nodes and on supported objects. Draft_CircularArray Circular array Circular array Creates copies of the selected object, and places the copies in a radial pattern creating various circular layers. The array can be turned into an orthogonal or a polar array by changing its type. Creates copies of the selected object, and places the copies in a radial pattern creating various circular layers. The array can be turned into an orthogonal or a polar array by changing its type. Draft_AnnotationStyleEditor Annotation styles... Annotation styles... Manage or create annotation styles Manage or create annotation styles Draft_Point Point Taškas Creates a point object. Click anywhere on the 3D view. Creates a point object. Click anywhere on the 3D view. Draft_Rotate Rotate Vartyti Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. If the "copy" option is active, it will create rotated copies. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. If the "copy" option is active, it will create rotated copies. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. Draft_AddToGroup Move to group... Move to group... Moves the selected objects to an existing group, or removes them from any group. Create a group first to use this tool. Moves the selected objects to an existing group, or removes them from any group. Create a group first to use this tool. Draft_SelectGroup Select group Select group Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. Draft_AutoGroup Autogroup Autogroup Select a group to add all Draft and BIM objects to. Select a group to add all Draft and BIM objects to. Draft_AddConstruction Add to construction group Add to construction group Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. Draft_AddNamedGroup Add a new named group Add a new named group Add a new group with a given name. Add a new group with a given name. Draft_WorkingPlaneProxy Create working plane proxy Create working plane proxy Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. Draft_WireToBSpline Wire to B-spline Wire to B-spline Converts a selected polyline to a B-spline, or a B-spline to a polyline. Converts a selected polyline to a B-spline, or a B-spline to a polyline. Draft_FlipDimension Flip dimension Flip dimension Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Draft_Fillet Fillet Kraštų suapvalinimas Creates a fillet between two selected wires or edges. Creates a fillet between two selected wires or edges. Draft_SetStyle Set style Set style Sets default styles Sets default styles Draft_Polygon Polygon Daugiakampis Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. CTRL to snap, SHIFT to constrain Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. CTRL to snap, SHIFT to constrain Draft_Split Split Skelti Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. Draft_Trimex Trimex Trimex Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. Draft_BSpline B-spline B-splainas, glodžioji kreivė Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. Draft_ApplyStyle Apply current style Apply current style Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. Draft_BezCurve Bézier curve Bézier curve Creates an N-degree Bézier curve. The more points you pick, the higher the degree. CTRL to snap, SHIFT to constrain. Creates an N-degree Bézier curve. The more points you pick, the higher the degree. CTRL to snap, SHIFT to constrain. Draft_CubicBezCurve Cubic Bézier curve Cubic Bézier curve Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. Draft_BezierTools Bézier tools Bézier tools Create various types of Bézier curves. Create various types of Bézier curves. Draft_Circle Circle Apskritimas Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. Draft_Ellipse Ellipse Elipsė Creates an ellipse. CTRL to snap. Creates an ellipse. CTRL to snap. Draft_Facebinder Facebinder Facebinder Creates a facebinder object from selected faces. Creates a facebinder object from selected faces. Draft_OrthoArray Array Masyvas Creates copies of the selected object, and places the copies in an orthogonal pattern, meaning the copies follow the specified direction in the X, Y, Z axes. The array can be turned into a polar or a circular array by changing its type. Creates copies of the selected object, and places the copies in an orthogonal pattern, meaning the copies follow the specified direction in the X, Y, Z axes. The array can be turned into a polar or a circular array by changing its type. Draft_Scale Scale Mastelis Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy. Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy. Draft_Layer Layer Sluoksnis Adds a layer to the document. Objects added to this layer can share the same visual properties. Adds a layer to the document. Objects added to this layer can share the same visual properties. Draft_PointArray Point array Point array Creates copies of the selected base object at the points of a point object. First select the base object, and then select the point object. Creates copies of the selected base object at the points of a point object. First select the base object, and then select the point object. Draft_PointLinkArray Point link array Point link array Like the PointArray tool, but creates a 'Point link array' instead. A 'Point link array' is more efficient when handling many copies. Like the PointArray tool, but creates a 'Point link array' instead. A 'Point link array' is more efficient when handling many copies. Draft_ArrayTools Array tools Array tools Create various types of arrays, including rectangular, polar, circular, path, and point Create various types of arrays, including rectangular, polar, circular, path, and point Draft_ToggleConstructionMode Toggle construction mode Toggle construction mode Toggles the Construction mode. When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. Toggles the Construction mode. When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. Draft_ToggleDisplayMode Toggle normal/wireframe display Perjungti į įprastinį ar vielinį atvaizdavimą Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. Draft_Dimension Dimension Matmuo Creates a dimension. - Pick three points to create a simple linear dimension. - Select a straight line to create a linear dimension linked to that line. - Select an arc or circle to create a radius or diameter dimension linked to that arc. - Select two straight lines to create an angular dimension between them. CTRL to snap, SHIFT to constrain, ALT to select an edge or arc. You may select a single line or single circular arc before launching this command to create the corresponding linked dimension. You may also select an 'App::MeasureDistance' object before launching this command to turn it into a 'Draft Dimension' object. Creates a dimension. - Pick three points to create a simple linear dimension. - Select a straight line to create a linear dimension linked to that line. - Select an arc or circle to create a radius or diameter dimension linked to that arc. - Select two straight lines to create an angular dimension between them. CTRL to snap, SHIFT to constrain, ALT to select an edge or arc. You may select a single line or single circular arc before launching this command to create the corresponding linked dimension. You may also select an 'App::MeasureDistance' object before launching this command to turn it into a 'Draft Dimension' object. Draft_Stretch Stretch Stretch Stretches the selected objects. Select an object, then draw a rectangle to pick the vertices that will be stretched, then draw a line to specify the distance and direction of stretching. Stretches the selected objects. Select an object, then draw a rectangle to pick the vertices that will be stretched, then draw a line to specify the distance and direction of stretching. Draft_Rectangle Rectangle Stačiakampis Creates a 2-point rectangle. CTRL to snap. Creates a 2-point rectangle. CTRL to snap. Draft_Mirror Mirror Mirror Mirrors the selected objects along a line defined by two points. Mirrors the selected objects along a line defined by two points. Draft_PathTwistedArray Path twisted array Path twisted array Creates copies of the selected object along a selected path, and twists the copies. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Creates copies of the selected object along a selected path, and twists the copies. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. Draft_PathTwistedLinkArray Path twisted link array Path twisted link array Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. Draft_Clone Clone Klonuoti Creates a clone of the selected objects. The resulting clone can be scaled in each of its three directions. Creates a clone of the selected objects. The resulting clone can be scaled in each of its three directions. Draft_PolarArray Polar array Polar array Creates copies of the selected object, and places the copies in a polar pattern defined by a center of rotation and its angle. The array can be turned into an orthogonal or a circular array by changing its type. Creates copies of the selected object, and places the copies in a polar pattern defined by a center of rotation and its angle. The array can be turned into an orthogonal or a circular array by changing its type. Draft_Slope Set slope Set slope Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. Draft_Upgrade Upgrade Upgrade Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Draft_Offset Offset Offset Offsets of the selected object. It can also create an offset copy of the original object. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. Offsets of the selected object. It can also create an offset copy of the original object. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. Draft_Shape2DView Shape 2D view Shape 2D view Creates a 2D projection of the selected objects on the XY plane. The initial projection direction is the negative of the current active view direction. You can select individual faces to project, or the entire solid, and also include hidden lines. These projections can be used to create technical drawings with the TechDraw Workbench. Creates a 2D projection of the selected objects on the XY plane. The initial projection direction is the negative of the current active view direction. You can select individual faces to project, or the entire solid, and also include hidden lines. These projections can be used to create technical drawings with the TechDraw Workbench. Draft_ShapeString Shape from text Shape from text Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. Draft_Heal Heal Taisyti Heal faulty Draft objects saved with an earlier version of the program. If an object is selected it will try to heal that object in particular, otherwise it will try to heal all objects in the active document. Heal faulty Draft objects saved with an earlier version of the program. If an object is selected it will try to heal that object in particular, otherwise it will try to heal all objects in the active document. Draft_Downgrade Downgrade Downgrade Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. App::Property The placement of the base point of the first line The placement of the base point of the first line The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. Text string Text string Font file name Font file name Height of text Height of text Horizontal and vertical alignment Horizontal and vertical alignment Height reference used for justification Height reference used for justification Keep left margin and leading white space when justification is left Keep left margin and leading white space when justification is left Scale to ensure cap height is equal to size Scale to ensure cap height is equal to size Inter-character spacing Inter-character spacing Oblique (slant) angle Oblique (slant) angle Fill letters with faces Fill letters with faces Fuse faces if faces overlap, usually not required (can be very slow) Fuse faces if faces overlap, usually not required (can be very slow) The base object used by this object The base object used by this object The PAT file used by this object The PAT file used by this object The pattern name used by this object The pattern name used by this object The pattern scale used by this object The pattern scale used by this object The pattern rotation used by this object The pattern rotation used by this object If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) The objects included in this clone The objects included in this clone The scale factor of this clone The scale factor of this clone If Clones includes several objects, set True for fusion or False for compound If Clones includes several objects, set True for fusion or False for compound Start angle of the arc Start angle of the arc End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) Radius of the circle Apskritimo spindulys Create a face Create a face The area of this object The area of this object The objects that are part of this layer The objects that are part of this layer Number of faces Number of faces Radius of the control circle Valdančiojo apskritimo spindulys How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle Radius to use to fillet the corners Naudojamas spindulys kampų užapvalinimui Size of the chamfer to give to the corners Size of the chamfer to give to the corners The base object that will be duplicated. The base object that will be duplicated. The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. Number of copies to create. Number of copies to create. Rotation factor of the twisted array. Rotation factor of the twisted array. Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The placement of the 'Text' element in 3D space The placement of the 'Text' element in 3D space The text to display when 'Label Type' is set to 'Custom' The text to display when 'Label Type' is set to 'Custom' The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like Arch objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like Arch objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. The base object that will be duplicated The base object that will be duplicated List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. Number of copies to create Number of copies to create Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Alignment vector for 'Tangent' mode Alignment vector for 'Tangent' mode Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode Direction of the local Z axis when 'Force Vertical' is true Direction of the local Z axis when 'Force Vertical' is true Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Length from the start of the path to the first copy. Length from the start of the path to the first copy. Length from the end of the path to the last copy. Length from the end of the path to the last copy. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circular layers around the base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circular layers around the base object. Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) Number of copies in X direction Number of copies in X direction Number of copies in Y direction Number of copies in Y direction Number of copies in Z direction Number of copies in Z direction Distance and orientation of intervals in X direction Distance and orientation of intervals in X direction Distance and orientation of intervals in Y direction Distance and orientation of intervals in Y direction Distance and orientation of intervals in Z direction Distance and orientation of intervals in Z direction The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. Number of copies in the polar direction Number of copies in the polar direction Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction Angle to cover with copies Angle to cover with copies Distance between circular layers Distance between circular layers Distance between copies in the same circular layer Distance between copies in the same circular layer Number of circular layers. The 'Base' object counts as one layer. Number of circular layers. The 'Base' object counts as one layer. A parameter that determines how many symmetry planes the circular array will have. A parameter that determines how many symmetry planes the circular array will have. Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Base object that will be duplicated Base object that will be duplicated Object containing points used to distribute the copies. Object containing points used to distribute the copies. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Additional placement, shift and rotation, that will be applied to each copy Additional placement, shift and rotation, that will be applied to each copy The base object this 2D view must represent The base object this 2D view must represent The projection vector of this object The projection vector of this object The way the viewed object must be projected The way the viewed object must be projected The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode Show hidden lines Rodyti paslėptas linijas Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments If this is True, this object will include only visible objects If this is True, this object will include only visible objects A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property This object will be recomputed only if this is True. This object will be recomputed only if this is True. The points of the Bezier curve The points of the Bezier curve The degree of the Bezier function The degree of the Bezier function Continuity Glotnumas If the Bezier curve should be closed or not If the Bezier curve should be closed or not Create a face if this curve is closed Create a face if this curve is closed The length of this object The length of this object The placement of this object Šio objekto padėtis X Location X Location Y Location Y Location Z Location Z Location Start angle of the elliptical arc Start angle of the elliptical arc End angle of the elliptical arc (for a full circle, give it same value as First Angle) End angle of the elliptical arc (for a full circle, give it same value as First Angle) Minor radius of the ellipse Mažasis elipsės spindulys Major radius of the ellipse Didysis elipsės spindulys Area of this object Area of this object The start point of this line. The start point of this line. The end point of this line. The end point of this line. The length of this line. The length of this line. Radius to use to fillet the corner. Naudojamas spindulys kampo užapvalinimui. The normal direction of the text of the dimension The normal direction of the text of the dimension The object measured by this dimension object The object measured by this dimension object The object, and specific subelements of it, that this dimension object is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. The object, and specific subelements of it, that this dimension object is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. When measuring circular arcs, it determines whether to display the radius or the diameter value When measuring circular arcs, it determines whether to display the radius or the diameter value Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. Length of the rectangle Length of the rectangle Height of the rectangle Height of the rectangle Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle Linked faces Linked faces Specifies if splitter lines must be removed Specifies if splitter lines must be removed An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces An optional offset value to be applied to all faces An optional offset value to be applied to all faces This specifies if the shapes sew This specifies if the shapes sew The area of the faces of this Facebinder The area of the faces of this Facebinder The components of this block The components of this block The vertices of the wire The vertices of the wire If the wire is closed or not If the wire is closed or not The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The start point of this line The start point of this line The end point of this line The end point of this line The length of this line The length of this line Create a face if this object is closed Create a face if this object is closed The number of subdivisions of each edge The number of subdivisions of each edge The points of the B-spline The points of the B-spline If the B-spline is closed or not If the B-spline is closed or not Create a face if this spline is closed Create a face if this spline is closed Parameterization factor Parameterization factor Force sync pattern placements even when array elements are expanded Force sync pattern placements even when array elements are expanded Show the individual array elements Show the individual array elements Text color Teksto spalva Line spacing (relative to font size) Line spacing (relative to font size) Vertical alignment Vertical alignment Maximum number of characters on each line of the text box Maximum number of characters on each line of the text box Horizontal alignment Horizontal alignment The type of frame around the text of this object The type of frame around the text of this object Display a leader line or not Display a leader line or not Line width Linijos storis Line color Linijos spalva Defines an SVG pattern. Defines an SVG pattern. Defines the size of the SVG pattern. Defines the size of the SVG pattern. If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the print color will be used when objects in this layer are placed on a TechDraw page If it is true, the print color will be used when objects in this layer are placed on a TechDraw page The line color of the objects contained within this layer The line color of the objects contained within this layer The shape color of the objects contained within this layer The shape color of the objects contained within this layer The shape appearance of the objects contained within this layer The shape appearance of the objects contained within this layer The line width of the objects contained within this layer The line width of the objects contained within this layer The draw style of the objects contained within this layer The draw style of the objects contained within this layer The transparency of the objects contained within this layer The transparency of the objects contained within this layer The line color of the objects contained within this layer, when used on a TechDraw page The line color of the objects contained within this layer, when used on a TechDraw page Font name Šrifto pavadinimas Font size Šrifto dydis Spacing between text and dimension line Spacing between text and dimension line Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees Text Position. Leave '(0,0,0)' for automatic position Text Position. Leave '(0,0,0)' for automatic position Text override. Write '$dim' so that it is replaced by the dimension length. Text override. Write '$dim' so that it is replaced by the dimension length. The number of decimals to show The number of decimals to show Show the unit suffix Show the unit suffix A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation Arrow size Rodyklės dydis Arrow type Rodyklės rūšis Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines Length of the extension lines Length of the extension lines Length of the extension line beyond the dimension line Length of the extension line beyond the dimension line Shows the dimension line and arrows Shows the dimension line and arrows Command Transform Keisti Draft_LayerManager Manage layers... Manage layers... Set/modify the different layers of this document Set/modify the different layers of this document QObject Draft Pratempti Import-Export Importas-Eksportas Draft_Hyperlink Open hyperlinks Open hyperlinks Open linked documents Open linked documents