DialogAnnotation Styles Editor주석 스타일 편집기Renames the selected style선택한 스타일의 이름 바꾸기Rename이름 바꾸기Deletes the selected style선택한 스타일을 삭제합니다.New새로 만들기Delete삭제Layers Manager레이어 매니저Select All모두 선택Toggle Visibility표시 전환Isolate입체도Cancel취소하기OK확인Import styles from json filejson 파일에서 스타일 가져오기Export styles to json file스타일을 json 파일로 내보내기The font to use for texts and dimensions텍스트 및 치수에 사용할 글꼴Font name글꼴 이름The font size in system units시스템 단위의 글꼴 크기The width of the lines선 너비 px pxThe color of lines and arrows선과 화살표의 색상Line and arrow color선과 화살표 색상The distance the dimension line is additionally extended치수선의 길이가 늘어 났습니다.Dimension line overshoot치수선 돌출Extension line length연장선 길이The distance the extension lines are additionally extended beyond the dimension line치수선 보조선들의 길이가 치수선 위치를 넘어 가도록 증가 되었습니다Font size글꼴 크기The line spacing for multi-line texts and labels (relative to the font size)여러행 글자 또는 이름표에서 줄간격(글꼴 크기에 상대적)The color of texts, dimension texts and label texts글자, 치수 및 이름표 색상Text color문자 색Units단위A multiplier factor that affects the size of texts and markers텍스트 나 마커 들의 크기 에 영향을 주는 축척계수Style Name스타일 이름The name of the style. Existing style names can be edited.The name of the style. Existing style names can be edited.Add new…새로 추가…Scale multiplier축척 계수The type of the starting arrows or markers to use for dimensions and labelsThe type of the starting arrows or markers to use for dimensions and labelsStart arrow type시작 화살표 유형None없음The size of the starting arrows or markers in system unitsThe size of the starting arrows or markers in system unitsStart arrow size시작 화살표 크기The type of the ending arrows or markers to use for dimensions and labelsThe type of the ending arrows or markers to use for dimensions and labelsEnd arrow type종료 화살표 유형The size of the ending arrows or markers in system unitsThe size of the ending arrows or markers in system unitsEnd arrow size종료 화살표 크기If it is checked it will show the unit next to the dimension value선택하면 치수 값 옆에 장치가 표시됩니다.Show unit단위 표시Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitmm, m, in, ft와 같은 유효한 길이 단위를 지정하여 이 단위에 치수 값을 표시합니다.Unit override단위 재정의The number of decimals to show for dimension values치수 값에 대해 표시할 소수점 수Dimension Details치수 상세The distance between the dimension text and the dimension line치수선과 치수문자 사이의 간격Text spacing문자 간격Annotations주석Texts문자Line spacing factorLine spacing factorLines and Arrows선 및 화살표Displays the dimension line치수 선을 표시합니다Show dimension line치수선 보이기Line width선 두께Dot점Circle원Arrow화살표Tick두꺼움Tick-2확인-2Shows the unit next to the dimension value치수값 다음에 단위를 표시합니다Number of decimals소수점 이하 자릿수Extension line overshootExtension line overshootThe length of the extension lines연장선의 길이DraftCircularArrayTaskPanelCircular Array원형 배열Distance from one layer of objects to the next layer of objectsDistance from one layer of objects to the next layer of objectsRadial distance반지름 거리Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Tangential distance접선 거리The number of symmetry lines in the circular arrayThe number of symmetry lines in the circular arrayCenter of Rotation회전 중심Resets the coordinates of the center of rotationResets the coordinates of the center of rotationReset PointReset PointSymmetry대칭Number of concentric circles to create, including a copy of the original object.
It must be at least 2.Number of concentric circles to create, including a copy of the original object.
It must be at least 2.Number of concentric circles동심원의 갯수The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.회전축이 통과하는 점의 좌표입니다.
특성 편집기에서 축 자체의 방향을 변경합니다.XXYYZZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.이 옵션을 선택하면 배열의 결과 개체가 서로 닿으면 결합됩니다.
이것은 "연결 배열"이(가) 꺼져 있는 경우에만 작동합니다.Fuse결합(합집합)If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.이 옵션을 선택하면 결과 개체가 일반 배열 대신 "연결 배열"이 됩니다.
여러 복사본을 만들 때 링크 배열이 더 효율적이지만 함께 결합할 수는 없습니다.Link array연결 배열DraftOrthoArrayTaskPanelNumber of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.원래 개체의 복사본을 포함하여 지정된 방향의 배열에 있는 요소 수입니다.
숫자는 각 방향에서 1 이상이어야 합니다.XXYYZZReset XX 초기화Reset YY 초기화Distance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Z 방향의 요소 사이의 거리입니다.
일반적으로 Z 값만 필요하며, 나머지 두 값은 각각의 방향으로 추가적인 이동을 제공할 수 있습니다.
음수 값을 지정하면 음수 방향으로 복사본이 생성됩니다.Orthogonal ArrayOrthogonal ArrayToggles between orthogonal and linear modeToggles between orthogonal and linear modeSwitch to Linear ModeSwitch to Linear ModeX axisX 축Y axisY 축Z axisZ 축Number of Elements요소의 수Currently selected axis현재 선택된 축Distance between the elements in the X-direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the X-direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.X IntervalsX 간격Resets the distances거리를 초기화합니다Distance between the elements in the Y-direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the Y-direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Y IntervalsY 간격Z IntervalsZ 간격Reset ZZ 초기화If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.이 옵션을 선택하면 배열의 결과 개체가 서로 닿으면 결합됩니다.
이것은 "연결 배열"이(가) 꺼져 있는 경우에만 작동합니다.Fuse결합(합집합)If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.이 옵션을 선택하면 결과 개체가 일반 배열 대신 "연결 배열"이 됩니다.
여러 복사본을 만들 때 링크 배열이 더 효율적이지만 함께 결합할 수는 없습니다.Link array연결 배열DraftPolarArrayTaskPanelPolar ArrayPolar ArraySweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Polar angle편각Number of elements in the array, including a copy of the original object.
It must be at least 2.원래 개체의 복사본을 포함하여 배열에 있는 요소 수입니다.
최소 2개 이상이어야 합니다.Number of elements요소의 수The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.회전축이 통과하는 점의 좌표입니다.
특성 편집기에서 축 자체의 방향을 변경합니다.Center of Rotation회전 중심Resets the coordinates of the center of rotationResets the coordinates of the center of rotationReset Point재설정점XXYYZZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.이 옵션을 선택하면 배열의 결과 개체가 서로 닿으면 결합됩니다.
이것은 "연결 배열"이(가) 꺼져 있는 경우에만 작동합니다.Fuse결합(합집합)If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.이 옵션을 선택하면 결과 개체가 일반 배열 대신 "연결 배열"이 됩니다.
여러 복사본을 만들 때 링크 배열이 더 효율적이지만 함께 결합할 수는 없습니다.Link array연결 배열DraftShapeStringGuiShapeString글자형상XXYYZZCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate system전역 좌표계에 상대적인 좌표입니다.
작업 기준면 좌표계를 사용하려면 선택 취소Global전역Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)글꼴 파일(**.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)Text to be made into ShapeString글자형상으로 만들 글자Enter coordinates or pick a point with the mouseEnter coordinates or pick a point with the mouseResets the picked pointResets the picked pointReset PointReset PointHeight높이Height of the result결과의 높이Text텍스트Font file글꼴 파일FormTop (XY)평면(XY)Front (XZ)정면(XZ)Side (YZ)측면(YZ)Sets the working plane facing the current view현재 뷰를 향하는 작업 기준면을 설정합니다.Working Plane Setup작업평면 설정Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view.Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view.Sets the working plane to the XY-plane (ground plane)XY평면(지면)을 작업평면으로 설정합니다Sets the working plane to the XZ-plane (front plane)XZ평면(정면)을 작업평면으로 설정합니다Sets the working plane to the YZ-plane (side plane)YZ평면(측면)을 작업평면으로 설정합니다Align to ViewAlign to ViewThe working plane will align to the current
view each time a command is started작업 평면이 전류에 맞춰 정렬됩니다.
명령이 시작될 때마다의 뷰Automatic자동Offset편차An optional offset to give to the working plane
above its base position. Use this together with one
of the buttons above기본 위치보다 높은 작업 평면에 적용할 선택적 편차입니다. 이 편차를 위의 버튼 중 하나와 함께 사용하세요.
If this is selected, the working plane will be
centered on the current view when pressing one
of the buttons above이 옵션을 선택하면 작업 기준면이 됩니다.
1을 누를 때 현재 뷰 중심
위에 있는 버튼의Center plane on view중심 평면 뷰Centers the working plane on the current view when pressing one
of the buttons aboveCenters the working plane on the current view when pressing one
of the buttons aboveOr select a single vertex to move the current working plane without changing its orientation. Then press the button below.Or select a single vertex to move the current working plane without changing its orientation. Then press the button below.Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view.Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view.Move Working Plane작업평면 이동The color of the grid격자의 색상Grid color격자선 색상The distance between grid lines격자선 사이의 거리The number of squares between major grid lines주 격자선 사이의 사각형 갯수Major lines everyMajor lines every squares 정사각형Grid size격자 크기The distance at which a point can be snapped toThe distance at which a point can be snapped toCenter ViewCenter ViewResets the working plane to its next position작업 기준면을 다음 위치로 재설정합니다Next다음Grid spacing격자 간격The number of squares in the X- and Y-direction of the grid격자의 X 및 Y 방향의 사각형 갯수Snapping radius스냅 반경Centers the view on the current working plane뷰를 현재 작업 기준면의 중앙에 배치합니다.Resets the working plane to its previous position작업 기준면을 이전 위치로 재설정합니다.Previous이전Load preset프리셋 불러오기Shape셰이프Ambient shape color앰비언트 모양 색상Emissive shape colorEmissive shape colorSpecular shape colorSpecular shape colorShape transparency형상 투명도Shape shininess형상의 광택Other기타Line color선 색Line width선 두께 px pxDraw style그리기 스타일Solid고체Dashed점선(Dashed)Dotted점선(Dotted)DashDot1점 쇄선Display mode디스플레이 모드Flat Lines플랫 라인Wireframe철사틀Shaded음영 처리Fill the values below from a stored style presetFill the values below from a stored style presetPoint color점 색상Point size점 크기Points점Shape color모양 색상Annotations주석Extension line length연장선 길이Extension line overshootExtension line overshootText spacing문자 간격Text color문자 색Dimensions치수Dot점Annotation주석Texts문자Line spacing factorLine spacing factorThe annotation scale multiplier is the inverse of the scale set in the
Annotation scale widget. If the scale is 1:100 the multiplier is 100.주석 스케일 승수는 주석 스케일 위젯에 설정된 스케일의 역수입니다. 스케일이 1:100이면 승수는 100입니다.Start arrow type시작 화살표 유형Circle원Arrow화살표Tick두꺼움Tick-2확인-2None없음Start arrow size시작 화살표 크기End arrow type종료 화살표 유형End arrow size종료 화살표 크기The unit override for dimensions. Leave blank to use the current FreeCAD unit.치수에 사용할 단위를 덮어쓰기합니다. 현재 FreeCAD 장치를 사용하려면 비워 두십시오.Dimension line overshoot치수선 돌출The distance the dimension line is extended past the extension linesThe distance the dimension line is extended past the extension linesThe color for texts, dimension texts and label texts글자, 치수 및 이름표의 색상Font name글꼴 이름The font for texts, dimensions and labels글자, 치수 및 이름표의 글꼴Font size글꼴 크기The height for texts, dimension texts and label texts글자, 치수 및 이름표의 높이The line spacing for multi-line texts and labels (relative to the font size)여러행 글자 또는 이름표에서 줄간격(글꼴 크기에 상대적)Scale multiplier축척 계수Line and arrow color선과 화살표 색상Style Settings스타일 설정Saves the current style as a presetSaves the current style as a presetShape AppearanceShape AppearanceLines and Arrows선 및 화살표Adds a unit symbol to dimension texts치수 뒤에 단위를 붙입니다The length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.The length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.The length of extension lines above the dimension lineThe length of extension lines above the dimension lineThe space between the dimension line and the dimension text치수 선과 치수 텍스트의 간격Apply the above style to selected object(s)Apply the above style to selected object(s)Apply the above style to all annotations (texts, dimensions and labels)Apply the above style to all annotations (texts, dimensions and labels)Show unit단위 표시Unit override단위 재정의Selected선택됨Hatch해칭PAT filePAT filePattern패턴Scale척도Rotation회전Align to faceAlign to faceAligns the pattern with the base object.
Otherwise, the pattern aligns with the global coordinate system.
This setting modifies the Translate property.Aligns the pattern with the base object.
Otherwise, the pattern aligns with the global coordinate system.
This setting modifies the Translate property.Pattern files (*.pat *.PAT)패턴파일(*.pat *.PAT)Gui::Dialog::DlgSettingsDraftDefault working plane기본 작업 평면General일반The number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.The number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.XY (Top)XY (맨 위)XZ (Front)XZ (앞)YZ (Side)YZ (측면)If checked, a widget indicating the current working
plane orientation appears when picking pointsIf checked, a widget indicating the current working
plane orientation appears when picking pointsIf checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.If checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.Include groups in layer listInclude groups in layer listIf checked, base objects, instead of created copies, are selected after copyingIf checked, base objects, instead of created copies, are selected after copyingIf checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.If checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.Create Part primitives if possibleCreate Part primitives if possibleIf checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.If checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.Keep face colors during downgrade/upgradeKeep face colors during downgrade/upgradeIf checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.If checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.Keep face names during downgrade/upgradeKeep face names during downgrade/upgradeThis is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.This is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.Edit node pick radiusEdit node pick radiusThe pick radius of edit nodesThe pick radius of edit nodesLabel prefix for clones복제본에 대한 이름표 접두사The default prefix added to the label of new clones새 복제본의 이름표에 추가된 기본 접두사Construction group labelConstruction group labelThe default label for the construction geometry groupThe default label for the construction geometry groupThe default color for Draft objects in construction modeThe default color for Draft objects in construction modeInternal precision level내부 정밀도 수준Show working plane orientationShow working plane orientationCommand Options명령 옵션If checked, instructions are displayed in the Report View when using Draft commandsIf checked, instructions are displayed in the Report View when using Draft commandsShow prompts in the Report ViewShow prompts in the Report ViewIf checked, Length input, instead of the X coordinate, will have the initial focus.
This allows indicating a direction and then type a distance.If checked, Length input, instead of the X coordinate, will have the initial focus.
This allows indicating a direction and then type a distance.Set focus on Length instead of X coordinateX 좌표 대신 길이에 포커스 설정Select base objects after copying복사 후 기본 대상체 선택Maximum number of editable objectsMaximum number of editable objectsConstruction보조선Construction geometry colorConstruction geometry colorDraft classic styleDraft classic styleBitsnpieces styleBitsnpieces 스타일VisualVisualSVG PatternsSVG PatternsSVG pattern sizeSVG pattern sizeThe default size for SVG patterns. A higher value results in a denser pattern.The default size for SVG patterns. A higher value results in a denser pattern.Additional SVG pattern locationAdditional SVG pattern locationAn optional directory with custom SVG files containing
pattern definitions to be added to the standard patternsAn optional directory with custom SVG files containing
pattern definitions to be added to the standard patternsDrawing View Line DefinitionsDrawing View Line DefinitionsDashed line definition점선 정의An SVG linestyle definitionSVG 라인 스타일 정의Dashdot line definition대시도트 선 정의Dotted line definition점선 정의Texts and dimensions텍스트 및 치수Font size글꼴 크기mmmmLines and Arrows선 및 화살표Start arrow type시작 화살표 유형The default symbol displayed at the start of dimension linesThe default symbol displayed at the start of dimension linesNone없음Start arrow size시작 화살표 크기The default starting arrow size시작 화살표의 기본 크기End arrow type종료 화살표 유형The default symbol displayed at the end of dimension linesThe default symbol displayed at the end of dimension linesEnd arrow size종료 화살표 크기The default ending arrow sizeThe default ending arrow sizeNumber of decimals소수점 이하 자릿수Dimension Details치수 상세Extension line overshoot연장선 돌출Dimension line overshoot치수선 돌출The default annotation scale multiplier. This is the inverse of the scale set
in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100.The default annotation scale multiplier. This is the inverse of the scale set
in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100.Texts문자The default height for texts, dimension texts and label textsThe default height for texts, dimension texts and label textsLine spacing factor선 간격 인수The default line spacing for multi-line texts and labels (relative to the font size)The default line spacing for multi-line texts and labels (relative to the font size)Scale multiplier축척 계수Texts and Dimensions텍스트 및 치수Annotations주석Font name글꼴 이름The default font for texts, dimensions and labels글자, 치수 및 이름표의 기본 글꼴Text color문자 색The default color for texts, dimension texts and label texts글자, 치수 및 이름표의 기본 색상If checked, the dimension line is displayed by defaultIf checked, the dimension line is displayed by defaultShow dimension line치수선 보기Line width선 두께The default line width기본 선 두께 px pxDot점Circle원Arrow화살표Tick두꺼움Tick-2확인-2Line and arrow color선과 화살표 색상The default color for lines and arrows선과 화살표의 기본 색상Units단위If checked, a unit symbol is added to dimension texts by defaultIf checked, a unit symbol is added to dimension texts by defaultShow unit단위 표시Unit override단위 재정의The default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.The default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.The default number of decimal places for dimension textsThe default number of decimal places for dimension textsThe optional string inserted between the feet and inches values in dimensionsThe optional string inserted between the feet and inches values in dimensionsThe default distance the dimension line is extended past the extension linesThe default distance the dimension line is extended past the extension linesExtension line length연장선 길이The default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.The default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.The default length of extension lines above the dimension lineThe default length of extension lines above the dimension lineThe default space between the dimension line and the dimension textThe default space between the dimension line and the dimension textText spacing문자 간격Feet separatorFeet separatorSVGSVGImport style스타일 가져오기Use default style from Part/PartDesignUse default style from Part/PartDesignUse original SVG style원본 SVG 형식 사용If checked, no unit conversion will occur.
One unit in the SVG file will be interpreted as one millimeter.If checked, no unit conversion will occur.
One unit in the SVG file will be interpreted as one millimeter.Disable unit scaling단위 스케일링 비활성화Add wires for invalid facesAdd wires for invalid facesMethod for importing SVG object colorsMethod for importing SVG object colorsIf face generation results in a degenerated face,
a raw wire from the original shape is addedIf face generation results in a degenerated face,
a raw wire from the original shape is addedCheck to cut shapes according to the even/odd SVG fill ruleCheck to cut shapes according to the even/odd SVG fill ruleApply CutsApply CutsCoordinate precision (crucial for detecting closed paths)Coordinate precision (crucial for detecting closed paths)The number of decimal places used in internal coordinate operations (for example 3 = 0.001).
The optimal value depends on the absolute size of the import. Typical values are between 1 and 5.The number of decimal places used in internal coordinate operations (for example 3 = 0.001).
The optimal value depends on the absolute size of the import. Typical values are between 1 and 5.Export style내보내기 스타일Style of SVG file to write when exporting a sketch스케치를 내보낼 때 쓸 SVG 파일 스타일Translated (for print & display)번역됨(인쇄 및 디스플레이용)Raw (for CAM)원본 (CAM)All white lines will appear in black in the SVG for better readability against white backgrounds흰색 배경에 대한 가독성을 높이기 위해 SVG에서 모든 흰색 선이 검은색으로 표시됩니다.Convert white line color to black흰색 선 색상을 검은색으로 변환Maximum segment length for discretized arcsMaximum segment length for discretized arcsVersions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.Versions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.OCAOCAImport Options불러오기 옵션Imports the areas (3D faces) tooImports the areas (3D faces) tooImport OCA areasOCA 영역 가져오기DXFDXFAllow FreeCAD to automatically download and update the DXF librariesAllow FreeCAD to automatically download and update the DXF librariesImport가져오기All objects containing faces will be exported as 3D polyface meshesAll objects containing faces will be exported as 3D polyface meshesProject exported objects along current view directionProject exported objects along current view directionUse colors from the DXF fileUse colors from the DXF fileJoin geometrygeometry를 결합Use standard font size for texts텍스트에 표준 글꼴 크기 사용Render polylines with widthRender polylines with widthEllipse export is poorly supported. Use this to export them as polylines instead.타원 내보내기는 불완전하게 지원됩니다. 대신에 이것을 사용하여 꺾은선으로 내보내기 하세요..Treat ellipses and splines as polylines타원과 조절곡선을 꺾은선으로 처리If checked, this preferences dialog will be shown each time you import or export
a DXF file.If checked, this preferences dialog will be shown each time you import or export
a DXF file.Show the importer dialog when importing a fileShow the importer dialog when importing a fileUse the legacy Python importer. This importer is more feature-complete but slower and requires an external library.Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library.Use legacy importerUse legacy importerUse the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library.Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library.Use legacy exporterUse legacy exporterAutomatic Update (Legacy Only)Automatic Update (Legacy Only)If checked, FreeCAD is allowed to download and update the Python libraries
required by the legacy importer. This can also be done manually by installing
the 'dxf_library' addon from the Addon Manager.If checked, FreeCAD is allowed to download and update the Python libraries
required by the legacy importer. This can also be done manually by installing
the 'dxf_library' addon from the Addon Manager.Import AsImport AsCreates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench. Creates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench. Editable Draft objects (highest fidelity, slowest)Editable Draft objects (highest fidelity, slowest)DxfImportModeDxfImportModeCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing and Part workbench integration.Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing and Part workbench integration.Editable Part primitives (high fidelity, slower)Editable Part primitives (high fidelity, slower)Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Individual Part shapes (balanced, recommended)Individual Part shapes (balanced, recommended)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for importing and viewing very large files with maximum performance.Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for importing and viewing very large files with maximum performance.Fused Part shapes (lowest fidelity, fastest)Fused Part shapes (lowest fidelity, fastest)Import Settings설정 가져오기Global scaling factorGlobal scaling factorScale factor to apply to DXF files on import. The factor is the conversion
between the DXF file's unit and millimeters. Example: for files in
millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4,
in feet: 304.8Scale factor to apply to DXF files on import. The factor is the conversion
between the DXF file's unit and millimeters. Example: for files in
millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4,
in feet: 304.8If checked, text, mtext, and dimension entities will be imported as Draft objectsIf checked, text, mtext, and dimension entities will be imported as Draft objectsIf checked, point entities will be importedIf checked, point entities will be importedPoints점If checked, entities from the paper space will also be imported. By default,
only model space is importedIf checked, entities from the paper space will also be imported. By default,
only model space is importedPaper space objectsPaper space objectsIf checked, anonymous blocks (whose names begin with *) will also be imported.
These are often used for hatches and dimensionsIf checked, anonymous blocks (whose names begin with *) will also be imported.
These are often used for hatches and dimensionsAnonymous blocks (*-blocks)Anonymous blocks (*-blocks)If checked, the boundaries of hatch objects will be imported as closed wires.
(Legacy importer only)If checked, the boundaries of hatch objects will be imported as closed wires.
(Legacy importer only)Hatch boundariesHatch boundariesAppearance외관If checked, colors will be set as specified in the DXF file whenever
possible. Otherwise, default FreeCAD colors are appliedIf checked, colors will be set as specified in the DXF file whenever
possible. Otherwise, default FreeCAD colors are appliedIf checked, imported texts will get the standard Draft text size, instead of
the size defined in the DXF document. (Legacy importer only)If checked, imported texts will get the standard Draft text size, instead of
the size defined in the DXF document. (Legacy importer only)Advanced processingAdvanced processingIf checked, the legacy importer will attempt to join coincident geometric
objects into wires. This can be slow for large files. (Legacy importer only)If checked, the legacy importer will attempt to join coincident geometric
objects into wires. This can be slow for large files. (Legacy importer only)If checked, polylines that have a width property will be rendered as faces
representing that width. (Legacy importer only)If checked, polylines that have a width property will be rendered as faces
representing that width. (Legacy importer only)If checked, the legacy importer will attempt to create Sketcher objects
instead of Draft or Part objects. This overrides the 'Import As' settingIf checked, the legacy importer will attempt to create Sketcher objects
instead of Draft or Part objects. This overrides the 'Import As' settingCreate sketches스케치 생성Export Options내보내기 옵션Maximum spline segmentMaximum spline segmentMaximum length of each of the polyline segments. '0' treats the whole spline as a straight segment.Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment.Export 3D objects as polyface meshesExport 3D objects as polyface meshesTechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.TechDraw 뷰가 블록으로 내보내집니다.
DXF R12 이후 템플릿 에서는 실패할 수도 있습니다.Export TechDraw Views as blocksTechDraw 뷰를 블록으로 내보내기Exported objects will be projected to reflect the current view direction내보낸 객체가 현재 뷰 방향을 반영하도록 투영됩니다.ShiftShiftAlways snap항상 포착Grid and Snapping격자와 포착If checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if "Show grid border" is enabled.If checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if "Show grid border" is enabled.Major lines everyMajor lines everyThe number of squares between major grid lines.
Major grid lines are thicker than minor grid lines.주 격자선 사이의 사각형 갯수입니다.
주 격자선은 보조 격자선보다 두껍습니다. squares 정사각형Snapping and Modifier KeysSnapping and Modifier KeysSnap modifierSnap modifierThe Snap modifier keyThe Snap modifier keyCtrlCtrlAltAltConstrain modifierConstrain modifierAlt modifierAlt modifierThe Alt modifier key. The function of this key depends on the command.The Alt modifier key. The function of this key depends on the command.If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.The distance between grid lines격자선 사이의 거리The maximum number of objects Draft Edit is allowed to process at the same timeThe maximum number of objects Draft Edit is allowed to process at the same timeGrid격자Always show the grid항상 격자 표시If checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.If checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.Show the grid during commandsShow the grid during commandsIf checked, an additional border is displayed around the grid,
showing the main square size in the bottom left cornerIf checked, an additional border is displayed around the grid,
showing the main square size in the bottom left cornerShow grid border격자 경계 표시Show human figure사람 모습 보기If checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate systemIf checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate systemUse colored axes색상 축 사용Grid spacing격자 간격Grid size격자 크기The number of squares in the X- and Y-direction of the grid격자의 X 및 Y 방향의 사각형 갯수Grid transparency격자 투명도 % %Grid color격자선 색상The constrain modifier keyThe constrain modifier keySnap symbol style포착 기호 양식Mouse delayMouse delay seconds 초The style for snap symbols포착 기호의 양식Snap symbol color포착 기호 색상The color for snap symbols포착 기호의 색상If checked, snapping is activated without the need to press the Snap modifier keyIf checked, snapping is activated without the need to press the Snap modifier keyThe color of the grid격자의 색상The overall transparency of the grid격자의 전체 투명도DWGDWGThis is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.이것은 FreeCAD가 DWG 파일을 DXF로 변환하는 데 사용하는 방법입니다. "자동"을 선택하면 FreeCAD는 여기에 표시된 것과 동일한 순서로 다음 변환기 중 하나를 찾으려고 시도합니다. FreeCAD가 변환기를 찾을 수 없는 경우, 특정 변환기를 선택하고 아래에 해당 경로를 표시해야 할 수 있습니다. LibreDWG를 사용하는 경우 "dwg2dxf" 유틸리티를, ODA 파일 변환기를 사용하는 경우 "ODAFileConverter"를, QCAD의 프로 버전을 사용하는 경우 "dwg2dwg" 유틸리티를 선택합니다.Automatic자동DWG ConversionDWG ConversionConversion methodConversion methodLibreDWGLibreDWGODA ConverterODA ConverterQCAD proQCAD proPath to file converterPath to file converterThe path to your DWG file converter executableThe path to your DWG file converter executable<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html><html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html>RelativeRelativeRRContinue계속Close닫기OOCopy복사LLInterfaceInterfaceFFSelect edge모서리 선택Subelement modeSubelement modeBBCCExit종료AAIncrease radiusIncrease radiusDecrease radiusDecrease radiusEEQQLength길이:WipeWipeWWUUGlobal전역In-Command ShortcutsIn-Command ShortcutsGGMake face면 만들기Undo실행취소NNCycle snapCycle snapAdd holdAdd holdSet working plane작업면 설정Snap포착SSRestrict XRestrict XXXRestrict YRestrict YYYRestrict ZRestrict ZZZRecenterRecenterDDUI OptionsUI OptionsIf checked, the Draft Snap toolbar will only be visible during commandsIf checked, the Draft Snap toolbar will only be visible during commandsOnly show the Draft Snap toolbar during commandsOnly show the Draft Snap toolbar during commandsIf checked, the Draft Snap Widget is displayed in the Draft Status BarIf checked, the Draft Snap Widget is displayed in the Draft Status BarShow the Draft Snap Widget in the Draft WorkbenchShow the Draft Snap Widget in the Draft WorkbenchIf checked, the Draft Scale Widget is displayed in the Draft Status BarIf checked, the Draft Scale Widget is displayed in the Draft Status BarShow the Draft Scale Widget in the Draft WorkbenchShow the Draft Scale Widget in the Draft WorkbenchdraftRelativeRelativeGlobal전역Continue계속If checked, the command will not finish until pressing the command button againIf checked, the command will not finish until pressing the command button againIf checked, the next dimension will be placed in a chain with the previously placed DimensionIf checked, the next dimension will be placed in a chain with the previously placed DimensionClose닫기Set Working Plane작업 평면 설정Select Edge모서리 선택Copy복사WipeWipeAll shapes must be coplanarAll shapes must be coplanarSelected shapes must define a planeSelected shapes must define a planeTop평면Front정면SideSideAuto자동Current working plane: Auto현재 작업평면: 자동Current working plane:현재 작업평면:Selected shapes do not define a planeSelected shapes do not define a planeNo previous working plane이전 작업평면 없음No next working planeNo next working planeAxes:축형:Position:위치:None없음active command:명령 활성화:Active Draft command그리기명령 활성화X coordinate of the pointX coordinate of the pointXXYYZZLength길이:Angle각Radius반지름Creates the text object and finishes the commandCreates the text object and finishes the commandChanges the default style for new objectsChanges the default style for new objectsToggles construction modeToggles construction modeLabel Type레이블 형식Radius of Circle원의 반지름Coordinates relative to last point or to coordinate system origin
if is the first point to set마지막 점에 대한 좌표 또는 좌표계 원점
설정할 첫 번째 포인트인 경우Y coordinate of the pointY coordinate of the pointZ coordinate of the pointZ coordinate of the pointEnter PointEnter PointLength of the current segmentLength of the current segmentAngle of the current segmentAngle of the current segmentLocks the current angleLocks the current angleRadius of the circle원의 반지름Coordinates relative to global coordinate system.
Uncheck to use working plane coordinate system전역 좌표계에 상대적인 좌표입니다.
작업 기준면 좌표계를 사용하려면 선택 취소Finish마침Finishes the current drawing or editing operation현재 그리기 또는 편집 작업을 마칩니다.Modify Objects대상체 수정Facebinder ElementsFacebinder ElementsIf checked, an OCC-style offset will be performed instead of the classic offset이것을 선택하면 고전적 편차 대신 OCC 방식의 편차가 적용됩니다OCC-style offsetOCC 방식의 편차Undo실행취소If checked, objects will be copied instead of movedIf checked, objects will be copied instead of movedUndo the last segment마지막 세그먼트 실행 취소Enter a point with given coordinatesEnter a point with given coordinatesMake face면 만들기If checked, the object will be filled with a face.
Not available if the 'Use Part Primitives' preference is enabledIf checked, the object will be filled with a face.
Not available if the 'Use Part Primitives' preference is enabledChained modeChained modeFinishes and closes the current line현재 라인을 완료하고 닫습니다.Wipes the existing segments of this line and starts again from the last pointWipes the existing segments of this line and starts again from the last pointReorients the working plane on the last segmentReorients the working plane on the last segmentSelects an existing edge to be measured by this dimensionSelects an existing edge to be measured by this dimensionSidesSidesNumber of sides변의 수Modify subelementsModify subelementsIf checked, subelements will be modified instead of entire objectsIf checked, subelements will be modified instead of entire objectsAutogroup offAutogroup offLine선DWireDWireCircle원Arc호Rotate회전하기Point점Label이름표Offset편차Distance거리Offset distance편차 거리TrimexTrimexLocal {}지역 {}Global {}전역 {}Autogroup:자동모둠:Faces면Remove제거Add추가하기Draft제도Converting:Converting:Conversion successfulConversion successfulLibreDWG converter not foundLibreDWG converter not foundODA converter not foundODA converter not foundQCAD converter not foundQCAD converter not foundNo suitable external DWG converter has been found.
Please set one manually under menu Edit → Preferences → Import/Export → DWG
For more information see:
https://wiki.freecad.org/Import_Export_PreferencesNo suitable external DWG converter has been found.
Please set one manually under menu Edit → Preferences → Import/Export → DWG
For more information see:
https://wiki.freecad.org/Import_Export_PreferencesError during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.Error during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.Custom사용자 정의Unable to convert input into a scale factorUnable to convert input into a scale factorSet Custom ScaleSet Custom ScaleDraft Scale WidgetA context menu action used to show or hide this toolbar widgetDraft Scale WidgetSet the scale used by Draft annotation toolsSet the scale used by Draft annotation toolsDraft Snap WidgetA context menu action used to show or hide this toolbar widgetDraft Snap WidgetSet custom annotation scale in format x:x, x=xSet custom annotation scale in format x:x, x=xNo active document. Aborting.활성화된 문서가 없어 중지합니다.Wrong input: object {} not in document.잘못된 입력: 대상체 {}가 문서에 없습니다.Unable to insert new object into a scaled part크기가 조정된 부분에 새로운 대상체를 삽입할 수 없습니다Symbol not implemented. Using a default symbol.Symbol not implemented. Using a default symbol.image is Null화상이 비어 있음filename does not exist on the system or in the resource filefilename does not exist on the system or in the resource fileunable to load texture텍스처를 불러올 수 없습니다Does not have 'ViewObject.RootNode'.Does not have 'ViewObject.RootNode'.Solids:솔리드:Faces:면:Wires:와이어:Edges:모서리:Vertices:Vertices:Face면Wire철사different typesdifferent typesObjects have different placements. Distance between the two base points:Objects have different placements. Distance between the two base points:%s cannot be modified because its placement is readonly%s cannot be modified because its placement is readonlyThis function will be deprecated in {}. Please use '{}'.This function will be deprecated in {}. Please use '{}'.This function will be deprecated. Please use '{}'.This function will be deprecated. Please use '{}'.has a different valuehas a different valuedoesn't exist in one of the objectsdoesn't exist in one of the objects%s shares a base with %d other objects. Please check if you want to modify this.%s shares a base with %d other objects. Please check if you want to modify this.Wrong input: unknown document {}잘못된 입력: 알 수 없는 문서 {}Pick target pointPick target pointCreate Label이름표 생성Pick endpoint of leader linePick endpoint of leader linePick text positionPick text positionPick first point시작점 선택Edges do not intersect!Edges do not intersect!Create Line선 생성Create Wire철사 생성%1 pick next point, snap to first point to close%1 pick next point, snap to first point to close%1 pick next point%1 pick next pointUnable to create a wire from the selected objects선택한 대상체들로부터 철사를 생성할 수 없습니다Polyline꺾은선Pick next point다음 위치점 선택Convert to Wire철사로 변환Select an object to join합칠 대상체들을 선택하세요Join Lines선 합치기Only Draft lines and wires can be joinedOnly Draft lines and wires can be joinedSelection:선택:Pick location pointPick location pointCreate Text문자 생성Select an object to convert전환할 대상체를 선택하세요Convert to Sketch스케치로 변환Convert to DraftConvert to DraftConvert Draft/SketchConvert Draft/SketchSelect an object to move이동할 대상체를 선택하세요Pick start point시작점 선택Pick end point끝점 선택No valid subelements selectedNo valid subelements selectedMove이동Pick center point중심점 선택Pick radius반경 선택Start angle시작 각도Pick start angle시작각도 선택Aperture angleAperture anglePick aperturePick aperture%1 constrain%1 constrain%1 snap%1 snap%1/%2/%3 switch constraint%1/%2/%3 switch constraint%1 toggle relative%1 toggle relative%1 toggle global%1 toggle global%1 toggle continue%1 toggle continue%1 pick center%1 pick center%1 pick radius%1 pick radius%1 pick aperture%1 pick apertureCreate Circle (Part)Create Circle (Part)Create Circle원 생성Create Arc (Part)Create Arc (Part)Create Arc호 생성Pick aperture anglePick aperture angle%1 pick start angle%1 pick start angleArc From 3 Points3점 호Create Arc From 3 PointsCreate Arc From 3 Points%1 pick first point%1 pick first point%1 pick second point%1 pick second point%1 pick third point%1 pick third pointSelect an object to edit편집할 대상체를 선택하세요Select a Draft object to edit편집할 도면 대상체를 선택하세요Edit Node노드 편집Too many objects selected, maximum number set to:Too many objects selected, maximum number set to:No edit point found for selected objectNo edit point found for selected object: this object is not editable: 이 대상체는 편집할 수 없습니다Annotation Style EditorAnnotation Style EditorNew Style새로운 스타일Style name스타일 이름Style name required스타일 이름이 필요합니다No style name specifiedNo style name specifiedStyle existsStyle existsThis style name already existsThis style name already existsStyle in useStyle in useThis style is used by some objects in this document. Proceed?This style is used by some objects in this document. Proceed?Rename StyleRename StyleNew nameNew nameOpen Styles FileOpen Styles FileJSON files (*.json *.JSON)JSON files (*.json *.JSON)Save Styles FileSave Styles FileJSON file (*.json)JSON file (*.json)Select an object to projectSelect an object to projectCreate 2D View2D 뷰 생성Create Point점 생성%1 pick point%1 pick pointSelect an object to rotate회전할 대상체 선택Pick rotation centerPick rotation centerBase angleBase angleThe base angle to start the rotation fromThe base angle to start the rotation fromThe amount of rotation to perform.
The final angle will be the base angle plus this amount.The amount of rotation to perform.
The final angle will be the base angle plus this amount.Pick base anglePick base angleRotation회전Pick rotation angle회전각도 선택Add to New Group새 모둠에 추가Add to Group모둠에 추가No new selection. Select non-empty groups or objects inside groups.No new selection. Select non-empty groups or objects inside groups.New Layer새 레이어Layer name레이어 이름LayerObject label층New layer새 레이어Add to Construction GroupAdd to Construction GroupNew Group새 그룹Group name그룹명GroupObject label그룹New named group새 이름 있는 모둠Ungroup그룹풀기Group그룹Fillet radius모깎기 반지름Radius of the fillet모깎기 반지름Enter radius반지름 입력Create Fillet필렛 생성Fillet cannot be created모깎기를 만들 수 없습니다Polygon다각형Create Polygon (Part)Create Polygon (Part)Create Polygon다각형 생성Select objects to trim or extendSelect objects to trim or extendThis object is not supported이 대상체는 지원되지 않습니다Only a single face can be extruded하나면 면만 돌출 할 수 있습니다Trimex does not support this object typeTrimex does not support this object typeUnable to trim these objects, only Draft wires and arcs are supportedUnable to trim these objects, only Draft wires and arcs are supportedThese objects do not intersect이 대상체들은 서로 교차하지 않습니다Too many intersection points교차점이 너무 많습니다Offset only works on one object at a timeOffset only works on one object at a timeOffset of Bézier curves is currently not supportedOffset of Bézier curves is currently not supportedPick distancePick distanceOffset angle편차 각도Unable to trim these objects, too many wiresUnable to trim these objects, too many wiresB-SplineB-조절곡선Create B-SplineB-조절곡선 생성Change Style스타일 변경This object does not support possible coincident pointsThis object does not support possible coincident pointsDelete Point점 삭제Add Point점 추가Open Wire와이어 열기Close Wire와이어 닫기Reverse Wire와이어 반전Active object must have more than 2 points or nodesActive object must have more than 2 points or nodesOpen SplineOpen SplineClose SplineClose SplineReverse SplineReverse SplineMove Arc호 이동Set First Angle첫번째 각도 설정Set Last Angle마지막 각도 설정Set Radius반지름 설정Invert ArcInvert ArcMake SharpMake SharpMake TangentMake TangentMake SymmetricMake SymmetricReverse CurveReverse CurveOpen CurveOpen CurveClose CurveClose CurveSelection is not a knotSelection is not a knotEndpoint of Bézier curve cannot be smoothedEndpoint of Bézier curve cannot be smoothedActive object must have more than two points/nodesActive object must have more than two points/nodesBézier CurveBézier CurveCreate Bézier CurveCreate Bézier CurveCubic Bézier CurveCubic Bézier CurveClick and drag to define next knotClick and drag to define next knot%1 click and drag to define first point and knot%1 click and drag to define first point and knot%1 click and drag to define next point and knot%1 click and drag to define next point and knotEllipse타원Create Ellipse타원 생성Pick opposite pointPick opposite point%1 pick opposite point%1 pick opposite pointSelect faces from existing objects기존의 대상체들에서 면을 선택하세요Select an object to scaleSelect an object to scalePick base point기준점 선택Pick reference distance from base point기준점에서 기준 길이 선택Zero scale factor not allowed0 배율은 허용되지 않습니다Scale척도Pick new distance from base point기준점에서 새로운 길이 선택Layer층Create Dimension치수 생성Edge too short!엣지가 너무 짧습니다!Select an object to stretch연장할 대상체를 선택하세요Pick first point of selection rectanglePick first point of selection rectanglePick the opposite point of the selection rectanglePick the opposite point of the selection rectangleTurning a rectangle into a wireTurning a rectangle into a wirePick start point of displacementPick start point of displacementPick end point of displacementPick end point of displacementStretchStretchRectangle사각형Create Plane평면 생성Create Rectangle직사각형 생성Select an object to mirror대칭복사할 대상체를 선택하세요Pick start point of mirror linePick start point of mirror lineMirror대칭복사Pick end point of mirror linePick end point of mirror lineSelect an object to clone복제할 대상체를 선택하세요Cannot clone objects without a shape, abortingCannot clone objects without a shape, abortingCannot clone objects without a shape, skipping themCannot clone objects without a shape, skipping themSelect an object to upgradeSelect an object to upgradeUpgrade업그레이드Select an object to offset편차를 생성할 대상체를 선택하세요Cannot offset this object type이 유형의 대상체는 편차를 생성할 수 없습니다Pick ShapeString location pointPick ShapeString location pointCreate ShapeString글자형상 생성HealHealDowngrade다운그레이드Object:대상체:Polar ArrayPolar ArrayNumber of elements must be at least 2Number of elements must be at least 2The angle is above 360 degrees. It is set to this value to proceed.The angle is above 360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.Create Polar ArrayCreate Polar ArrayFuse:Fuse:Create Link array:Create Link array:Number of elements:Number of elements:Polar angle:Polar angle:Center of rotation:회전 중심:Orthogonal ArrayOrthogonal ArrayNumber of elements must be at least 1Number of elements must be at least 1In linear mode, at least 1 axis must be selectedIn linear mode, at least 1 axis must be selectedCreate Orthogonal ArrayCreate Orthogonal ArrayCreate link array:Create link array:Number of X elements:Number of X elements:Interval X:Interval X:Number of Y elements:Number of Y elements:Interval Y:Interval Y:Number of Z elements:Number of Z elements:Interval Z:Interval Z:Switch to Ortho ModeSwitch to Ortho ModeX-AxisX 축Y-AxisY 축Z-AxisZ축Switch to Linear ModeSwitch to Linear ModeNumber of elements요소의 수IntervalIntervalShapeString글자형상Default기본값Radial distance is zero. Resulting array may not look correct.Radial distance is zero. Resulting array may not look correct.Radial distance is negative. It is made positive to proceed.Radial distance is negative. It is made positive to proceed.Circular Array원형 배열At least 1 element must be selectedAt least 1 element must be selectedNumber of layers must be at least 2Number of layers must be at least 2Selection is not suitable for arraySelection is not suitable for arrayTangential distance cannot be 0Tangential distance cannot be 0Tangential distance is negative. It is made positive to proceed.Tangential distance is negative. It is made positive to proceed.Create Circular ArrayCreate Circular ArrayRadial distance:Radial distance:Tangential distance:Tangential distance:Number of concentric circles:Number of concentric circles:Symmetry parameter:대칭 매개변수:Font file not found글꼴 파일을 찾을 수 없습니다Specified font file is not a fileSpecified font file is not a fileSpecified font type is not supportedSpecified font type is not supportedShapeString: oblique angle must be in the -80 to +80 degree rangeShapeString: oblique angle must be in the -80 to +80 degree rangeShapeString: string has no wiresShapeString: string has no wiresShapeString: face creation failed for one character글자형상: 한 글자의 면 생성 실패, path object does not have 'Edges'., path object does not have 'Edges'.Start Offset too large for path length. Using 0 instead.Start Offset too large for path length. Using 0 instead.End Offset too large for path length minus Start Offset. Using 0 instead.End Offset too large for path length minus Start Offset. Using 0 instead.Length of tangent vector is 0. Copy not aligned.Length of tangent vector is 0. Copy not aligned.Length of normal vector is 0. Using a default axis instead.Length of normal vector is 0. Using a default axis instead.Spacing unit of 0 is not allowed, using defaultSpacing unit of 0 is not allowed, using defaultOperation would generate too many objects. AbortingOperation would generate too many objects. AbortingTangent and normal vectors are parallel. Normal replaced by a default axis.Tangent and normal vectors are parallel. Normal replaced by a default axis.Cannot calculate normal vector. Using the default normal instead.Cannot calculate normal vector. Using the default normal instead.AlignMode {} is not implementedAlignMode {} is not implementedNo shape found도형을 찾을 수 없음All shapes must be planarAll shapes must be planarPoints:점:Wrong input: must be a list or tuple of 3 points exactly.Wrong input: must be a list or tuple of 3 points exactly.Wrong input: must be list or tuple of 3 points exactly.Wrong input: must be list or tuple of 3 points exactly.Placement:Placement:Wrong input: incorrect type of placement.Wrong input: incorrect type of placement.Wrong input: incorrect type of points.Wrong input: incorrect type of points.Cannot generate shape:형상을 생성할 수 없음:Wrong input: base_object not in document.Wrong input: base_object not in document.Wrong input: path_object not in document.Wrong input: path_object not in document.Wrong input: must be a number.잘못된 입력: 숫자를 입력해야 합니다.Wrong input: must be a vector.잘못된 입력: 향량을 입력해야 합니다.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be a number or vector.Wrong input: must be a number or vector.Input: single value expanded to vector.Input: single value expanded to vector.Wrong input: must be an integer number.Wrong input: must be an integer number.Input: number of elements must be at least 1. It is set to 1.Input: number of elements must be at least 1. It is set to 1.Wrong input: must be a placement, a vector, or a rotation.Wrong input: must be a placement, a vector, or a rotation.Wrong input: target_object must not be a list.Wrong input: target_object must not be a list.Wrong input: target_object not in document.Wrong input: target_object not in document.Wrong input: subelements must be a list or tuple of strings, or a single string.Wrong input: subelements must be a list or tuple of strings, or a single string.Wrong input: subelement {} not in object.Wrong input: subelement {} not in object.Wrong input: label_type must be a string.Wrong input: label_type must be a string.Wrong input: label_type must be one of the following:Wrong input: label_type must be one of the following:Wrong input: must be a list of strings or a single string.Wrong input: must be a list of strings or a single string.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: points {} must be a list of at least two vectors.Wrong input: points {} must be a list of at least two vectors.Direction is not 'Custom'; points won't be used.Direction is not 'Custom'; points won't be used.Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: point_object not in document.Wrong input: point_object not in document.Wrong input: object has the wrong type.Wrong input: object has the wrong type.This function is deprecated. Do not use this function directly.This function is deprecated. Do not use this function directly.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Wrong input: edge_object must not be a list or tuple.Wrong input: edge_object must not be a list or tuple.Wrong input: edge_object not in document.Wrong input: edge_object not in document.Wrong input: object doesn't have a 'Shape' to measure.잘못된 입력: 대상체에는 측정할 '형상'이 없습니다.Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring.Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring.Wrong input: must be an integer.Wrong input: must be an integer.i1: values below 1 are not allowed; will be set to 1.i1: values below 1 are not allowed; will be set to 1.Wrong input: vertex not in object.Wrong input: vertex not in object.i2: values below 1 are not allowed; will be set to the last vertex in the object.i2: values below 1 are not allowed; will be set to the last vertex in the object.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.index: values below 1 are not allowed; will be set to 1.index: values below 1 are not allowed; will be set to 1.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to a circular edge.Wrong input: index doesn't correspond to a circular edge.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a list with two angles.Wrong input: must be a list with two angles.Wrong input: must be a number or quantity.Wrong input: must be a number or quantity.Layers레이어Wrong input: it must be a string.Wrong input: it must be a string.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be a number between 0 and 100.Wrong input: must be a number between 0 and 100.Edit편집Flatten평면화Upgrade: Unknown force method:Upgrade: Unknown force method:Found 1 block: exploding itFound 1 block: exploding itFound 1 multi-solids compound: exploding itFound 1 multi-solids compound: exploding itFound 1 parametric object: breaking its dependenciesFound 1 parametric object: breaking its dependenciesDowngrade: Unknown force method:Downgrade: Unknown force method:Found 1 array: exploding itFound 1 array: exploding itFound 2 objects: subtracting themFound 2 objects: subtracting themFound several faces: splitting themFound several faces: splitting themFound several faces: subtracting them from the first oneFound several faces: subtracting them from the first oneUnable to downgrade these objectsUnable to downgrade these objectsFound 1 face: extracting its wiresFound 1 face: extracting its wiresFound only wires: extracting their edgesFound only wires: extracting their edgesNo object given주어진 대상체가 없음The two points are coincidentThe two points are coincidentmirrored대칭복사된Found 1 solidifiable object: solidifying itFound 1 solidifiable object: solidifying itFound 2 objects: fusing themFound 2 objects: fusing themFound groups: closing open wires insideFound groups: closing open wires insideFound meshes: turning them into Part shapesFound meshes: turning them into Part shapesFound object with several coplanar faces: refining themFound object with several coplanar faces: refining themFound 1 closed sketch object: creating a face from itFound 1 closed sketch object: creating a face from itFound closed wires: creating facesFound closed wires: creating facesFound several wires or edges: wiring themFound several wires or edges: wiring themFound several non-treatable objects: creating compoundFound several non-treatable objects: creating compoundUnable to upgrade these objectsUnable to upgrade these objectsFound 1 open wire: closing itFound 1 open wire: closing itFound 1 non-parametric object: replacing it with a Draft objectFound 1 non-parametric object: replacing it with a Draft objectFound points: creating compoundFound points: creating compoundText텍스트No Target대상 없음Invalid label type잘못된 이름표 유형Tag not available for objectTag not available for objectMaterial not available for objectMaterial not available for objectPosition not available for (sub)objectPosition not available for (sub)objectLength not available for (sub)objectLength not available for (sub)objectArea not available for (sub)objectArea not available for (sub)objectVolume not available for (sub)objectVolume not available for (sub)objectOpening Multiple LinksOpening Multiple LinksMultiple links foundMultiple links foundThis may lead to the opening of various windowsThis may lead to the opening of various windowsFile not found:파일을 찾을 수 없습니다:Opening hyperlinkOpening hyperlinkSelect 3 vertices, one or more shapes or an object to define a working planeSelect 3 vertices, one or more shapes or an object to define a working planeDo you want to update the SVG pattern options
of existing objects in all opened documents?Do you want to update the SVG pattern options
of existing objects in all opened documents?Sketch is too complex to edit: it is suggested to use the default Sketcher editorSketch is too complex to edit: it is suggested to use the default Sketcher editorCreate layer레이어 생성Remove From Layer레이어에서 삭제Add to New Layer새 레이어에 추가Remove from layer레이어에서 삭제Add to new layer새 레이어에 추가Add to layer레이어에 추가Layers change레이어 변경Flip DimensionFlip DimensionToggle Grid격자 전환Change SlopeChange SlopeSelect exactly 2 objects, the base object and the path object, before calling this commandSelect exactly 2 objects, the base object and the path object, before calling this commandCreate Path ArrayCreate Path ArrayCreate Path Twisted ArrayCreate Path Twisted ArraySelect exactly 2 objects, the base object and the point object, before calling this commandSelect exactly 2 objects, the base object and the point object, before calling this commandCreate Point ArrayCreate Point ArrayClick anywhere on a line to split itClick anywhere on a line to split itSplit Line선 분할No active Draft toolbarNo active Draft toolbarConstruction ModeConstruction ModeToggle Display ModeToggle Display Mode2 edges are needed2 edges are neededEdges are not connected or radius is too large모서리가 연결되지 않았거나 반지름이 너무 큽니다Unable to build facebinderUnable to build facebinderNo valid faces for facebinderNo valid faces for facebinderUnable to build facebinder, resuming with sew disabledUnable to build facebinder, resuming with sew disabledConverting flat B-spline faces of facebinder to planar faces failedConverting flat B-spline faces of facebinder to planar faces failedActivate LayerActivate LayerReassign Properties of LayerReassign Properties of LayerSelect Layer ContentsSelect Layer ContentsAdd New Layer새 레이어 추가Reassign Properties of All LayersReassign Properties of All LayersMerge Layer DuplicatesMerge Layer DuplicatesThe DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either allow FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either allow FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.PAT file not foundPAT 파일을 찾을 수 없습니다Specified PAT file is not a fileSpecified PAT file is not a fileSpecified file type is not supportedSpecified file type is not supportedPattern not found in PAT filePattern not found in PAT fileWorkbenchDraft CreationDraft CreationDraft AnnotationDraft AnnotationDraft ModificationDraft ModificationDraft UtilityDraft UtilityDraft SnapDraft Snap&Drafting&Drafting&Annotation주석(&A)&Modification&Modification&Utilities&UtilitiesArc ToolsArc ToolsBézier ToolsBézier ToolsArray ToolsArray ToolsDraftFillet모깎기Delete original objects원본 대상체를 삭제합니다Create chamfer모따기Save styleSave styleName of this new styleName of this new styleWarning경고Name exists. Overwrite?같은 이름이 있습니다. 덮어 쓸까요?Error: json module not found. Unable to load styleError: json module not found. Unable to load styleError: json module not found. Unable to save styleError: json module not found. Unable to save styleSlopeSlopeTrue참False거짓Scale척도X-factorX-성분Y-factorY-성분Z-factorZ-성분Uniform scaling전체 크기조절Copy복사Modify subelementsModify subelementsPick From/To PointsPick From/To PointsEdit Scale축적 편집Create a clone복제_BSpline.createGeometry: Closed with same first/last Point. Geometry not updated._BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.Writing camera position카메라 위치 쓰기Writing objects shown/hidden stateWriting objects shown/hidden stateOn켜기Name이름Line Width선 두께Draw Style그리기 스타일Line Color선 색상Face Color면 색상Line Print Color선 표시 색상Transparency투명도New Layer새 레이어Custom사용자 정의Label이름표Position위치Length길이Area면적Volume부피Tag태그Material재료Label + Position이름표 + 위치Label + Length이름표 + 길이Label + Area이름표 + 면적Label + Volume이름표 + 부피Label + Material이름표 + 재료Create Clone복제하기Choose a base object before using this commandChoose a base object before using this commandOffset direction is not defined. Move the mouse on either side of the object first to indicate a direction.Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction.Point object does not have a discrete point, it cannot be used for an arrayPoint object does not have a discrete point, it cannot be used for an arrayDownload of DXF libraries failed.
Please install the DXF Library addon manually
from menu Tools → Addon ManagerDownload of DXF libraries failed.
Please install the DXF Library addon manually
from menu Tools → Addon ManagerimportOCAOCA: found no data to exportOCA: found no data to exportsuccessfully exported내보내기 성공ImportAirfoilDATDid not find enough coordinatesDid not find enough coordinatesImportSVGUnknown SVG export style, switching to TranslatedUnknown SVG export style, switching to TranslatedThe export list contains no object with a valid bounding boxThe export list contains no object with a valid bounding boxDraft_LabelLabel이름표Creates a label, optionally attached to a selected object or subelementCreates a label, optionally attached to a selected object or subelementDraft_LineLine선Creates a 2-point lineCreates a 2-point lineDraft_WirePolyline꺾은선Creates a polyline꺾은선 생성Draft_HatchHatch선무늬Creates hatches on the faces of a selected objectCreates hatches on the faces of a selected objectDraft_JoinJoin참가Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end.Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end.Draft_TextText텍스트Creates a multi-line annotationCreates a multi-line annotationDraft_MoveMove이동Moves the selected objects.
If the "Copy" option is active, it creates displaced copies.Moves the selected objects.
If the "Copy" option is active, it creates displaced copies.Draft_ArcArc호Creates a circular arc from a center point and a radiusCreates a circular arc from a center point and a radiusDraft_EditEdit편집Edits the active object활성화된 대상체를 편집합니다Draft_PointPoint점Creates a point점 생성Draft_RotateRotate회전하기Rotates the selected objects.
If the "Copy" option is active, it will create rotated copies.Rotates the selected objects.
If the "Copy" option is active, it will create rotated copies.Draft_FilletFillet모깎기Creates a fillet between 2 selected edgesCreates a fillet between 2 selected edgesDraft_PolygonPolygon다각형Creates a regular polygon (triangle, square, pentagon…)Creates a regular polygon (triangle, square, pentagon…)Draft_SplitSplit분할Splits the selected line or polyline at a specified pointSplits the selected line or polyline at a specified pointDraft_TrimexTrimexTrimexTrims or extends the selected object, or extrudes single facesTrims or extends the selected object, or extrudes single facesDraft_CircleCircle원Creates a circle (full circular arc)Creates a circle (full circular arc)Draft_EllipseEllipse타원Creates an ellipse타원 생성Draft_FacebinderFacebinderFacebinderCreates a facebinder from the selected facesCreates a facebinder from the selected facesDraft_OrthoArrayArrayArrayCreates copies of the selected object in an orthogonal patternCreates copies of the selected object in an orthogonal patternDraft_ScaleScale척도Scales the selected objects from a base pointScales the selected objects from a base pointDraft_LayerNew Layer새 레이어Adds a layer to the document.
Objects added to this layer can share the same visual properties.Adds a layer to the document.
Objects added to this layer can share the same visual properties.Draft_DimensionDimension치수Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edgesCreates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edgesDraft_StretchStretchStretchStretches the selected objectsStretches the selected objectsDraft_RectangleRectangle사각형Creates a 2-point rectangleCreates a 2-point rectangleDraft_MirrorMirror대칭복사Mirrors the selected objects along a line defined by 2 pointsMirrors the selected objects along a line defined by 2 pointsDraft_CloneClone복제Creates a clone of the selected objectsCreates a clone of the selected objectsDraft_UpgradeUpgrade업그레이드Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Draft_OffsetOffset편차Offsets the selected object.
It can also create an offset copy of the original object.Offsets the selected object.
It can also create an offset copy of the original object.Draft_HealHealHealHeals faulty Draft objects saved with an earlier version of FreeCAD.
If an object is selected it tries to heal only that object,
otherwise it tries to heal all objects in the active document.Heals faulty Draft objects saved with an earlier version of FreeCAD.
If an object is selected it tries to heal only that object,
otherwise it tries to heal all objects in the active document.Draft_DowngradeDowngrade다운그레이드Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be downgraded several times in a row.
For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted.Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be downgraded several times in a row.
For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted.App::PropertyThe placement of the base point of the first lineThe placement of the base point of the first lineThe text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.Text string문자열Font file name글꼴 파일 이름Height of text글자 높이Horizontal and vertical alignment수평 수직 정렬Height reference used for justificationHeight reference used for justificationKeep left margin and leading white space when justification is leftKeep left margin and leading white space when justification is leftScale to ensure cap height is equal to sizeScale to ensure cap height is equal to sizeInter-character spacing글자 간격Oblique (slant) angle기울기Fill letters with facesFill letters with facesFuse faces if faces overlap, usually not required (can be very slow)Fuse faces if faces overlap, usually not required (can be very slow)The base object used by this objectThe base object used by this objectThe PAT file used by this objectThe PAT file used by this objectThe pattern name used by this objectThe pattern name used by this objectThe pattern scale used by this objectThe pattern scale used by this objectThe pattern rotation used by this objectThe pattern rotation used by this objectIf set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)The objects included in this cloneThe objects included in this cloneThe scale factor of this cloneThe scale factor of this cloneIf Clones includes several objects,
set True for fusion or False for compoundIf Clones includes several objects,
set True for fusion or False for compoundAlways create a compoundAlways create a compoundStart angle of the arcStart angle of the arcEnd angle of the arc (for a full circle,
give it same value as First Angle)End angle of the arc (for a full circle,
give it same value as First Angle)Radius of the circle원의 반지름Create a face면을 생성합니다The area of this object이 대상체의 면적The objects that are part of this layerThe objects that are part of this layerNumber of faces면의 수Radius of the control circleRadius of the control circleHow the polygon must be drawn from the control circleHow the polygon must be drawn from the control circleRadius to use to fillet the corners모퉁이를 모깎기하는데 사용할 반지름Size of the chamfer to give to the cornersSize of the chamfer to give to the cornersThe base object that will be duplicated.The base object that will be duplicated.The object along which the copies will be distributed. It must contain 'Edges'.The object along which the copies will be distributed. It must contain 'Edges'.Number of copies to create.생성할 복사본의 갯수.Rotation factor of the twisted array.Rotation factor of the twisted array.Show the individual array elements (only for Link arrays)Show the individual array elements (only for Link arrays)The placement for each array elementThe placement for each array elementThe position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The placement of the 'Text' element in 3D spaceThe placement of the 'Text' element in 3D spaceThe text to display when 'Label Type' is set to 'Custom'The text to display when 'Label Type' is set to 'Custom'The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like BIM objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like BIM objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.The base object that will be duplicatedThe base object that will be duplicatedList of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment modeForce use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment modeNumber of copies to createNumber of copies to createAdditional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Alignment vector for 'Tangent' modeAlignment vector for 'Tangent' modeDirection of the local Z axis when 'Force Vertical' is trueDirection of the local Z axis when 'Force Vertical' is trueMethod to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Method to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Walk the path backwards.Walk the path backwards.How copies are spaced.
- Fixed count: available path length (minus start and end offsets) is evenly divided into n.
- Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path.
- Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies.How copies are spaced.
- Fixed count: available path length (minus start and end offsets) is evenly divided into n.
- Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path.
- Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies.Base fixed distance between elements.Base fixed distance between elements.Use repeating spacing patterns instead of uniform spacing.Use repeating spacing patterns instead of uniform spacing.Spacing is multiplied by a corresponding number in this sequence.Spacing is multiplied by a corresponding number in this sequence.Length from the start of the path to the first copy.Length from the start of the path to the first copy.Length from the end of the path to the last copy.Length from the end of the path to the last copy.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circles around the base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circles around the base object.Specifies if the copies should be fused together if they touch each other (slower)Specifies if the copies should be fused together if they touch each other (slower)Number of copies in X-directionX방향 복사본 개수Number of copies in Y-directionY방향 복사본 개수Number of copies in Z-directionZ방향 복사본 개수Distance and orientation of intervals in X-directionDistance and orientation of intervals in X-directionDistance and orientation of intervals in Y-directionDistance and orientation of intervals in Y-directionDistance and orientation of intervals in Z-directionDistance and orientation of intervals in Z-directionThe axis direction around which the elements in a polar or a circular array will be createdThe axis direction around which the elements in a polar or a circular array will be createdCenter point for polar and circular arrays.
The 'Axis' passes through this point.Center point for polar and circular arrays.
The 'Axis' passes through this point.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.Number of copies in the polar directionNumber of copies in the polar directionDistance and orientation of intervals in 'Axis' directionDistance and orientation of intervals in 'Axis' directionAngle to cover with copiesAngle to cover with copiesDistance between concentric circlesDistance between concentric circlesDistance between copies in the same circleDistance between copies in the same circleNumber of concentric circle. The 'Base' object counts as one circle.Number of concentric circle. The 'Base' object counts as one circle.A parameter that determines how many symmetry planes the circular array will haveA parameter that determines how many symmetry planes the circular array will haveTotal number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Base object that will be duplicatedBase object that will be duplicatedObject containing points used to distribute the copies.Object containing points used to distribute the copies.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Additional placement, shift and rotation, that will be applied to each copyAdditional placement, shift and rotation, that will be applied to each copyThe base object this 2D view must representThe base object this 2D view must representThe projection vector of this objectThe projection vector of this objectThe way the viewed object must be projectedThe way the viewed object must be projectedThe indices of the faces to be projected in Individual Faces modeThe indices of the faces to be projected in Individual Faces modeShow hidden lines숨은선 보기Fuse wall and structure objects of same type and materialFuse wall and structure objects of same type and materialTessellate Ellipses and B-splines into line segmentsTessellate Ellipses and B-splines into line segmentsFor Cutlines and Cutfaces modes, this leaves the faces at the cut locationFor Cutlines and Cutfaces modes, this leaves the faces at the cut locationLength of line segments if tessellating Ellipses or B-splines into line segmentsLength of line segments if tessellating Ellipses or B-splines into line segmentsIf this is True, this object will include only visible objectsIf this is True, this object will include only visible objectsA list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.If this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyThis object will be recomputed only if this is True.This object will be recomputed only if this is True.The points of the Bezier curveThe points of the Bezier curveThe degree of the Bezier functionThe degree of the Bezier functionContinuity연속성If the Bezier curve should be closed or notIf the Bezier curve should be closed or notCreate a face if this curve is closedCreate a face if this curve is closedThe length of this object이 대상체의 길이The placement of this object이 대상체의 배치X LocationX 위치Y LocationY 위치Z LocationZ 위치Start angle of the elliptical arcStart angle of the elliptical arcEnd angle of the elliptical arc
(for a full circle, give it same value as First Angle)End angle of the elliptical arc
(for a full circle, give it same value as First Angle)Minor radius of the ellipseMinor radius of the ellipseMajor radius of the ellipseMajor radius of the ellipseArea of this object이 대상체의 면적The start point of this line.이 선의 시작점.The end point of this line.이 선의 끝점.The length of this line.이 선의 길이.Radius to use to fillet the corner.모퉁이를 모깎기하는데 사용할 반지름The normal direction of the text of the dimensionThe normal direction of the text of the dimensionThe object measured by this dimensionThe object measured by this dimensionThe object, and specific subelements of it,
that this dimension is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.The object, and specific subelements of it,
that this dimension is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.When measuring circular arcs, it determines whether to display
the radius or the diameter valueWhen measuring circular arcs, it determines whether to display
the radius or the diameter valueStarting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Starting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.Length of the rectangle사각형의 가로 길이Height of the rectangle사각형의 높이Horizontal subdivisions of this rectangleHorizontal subdivisions of this rectangleVertical subdivisions of this rectangleVertical subdivisions of this rectangleLinked facesLinked facesSpecifies if splitter lines must be removedSpecifies if splitter lines must be removedAn optional extrusion value to be applied to all facesAn optional extrusion value to be applied to all facesAn optional offset value to be applied to all faces모든 면에 적용할 선택적 편차 값This specifies if the shapes sewThis specifies if the shapes sewThe area of the faces of this FacebinderThe area of the faces of this FacebinderThe components of this blockThe components of this blockThe vertices of the wireThe vertices of the wireIf the wire is closed or notIf the wire is closed or notThe base object is the wire, it's formed from 2 objectsThe base object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe start point of this line이 선의 시작점The end point of this line이 선의 끝점The length of this line이 선의 길이Create a face if this object is closed이 대상체가 닫혀 있다면 면을 생성The number of subdivisions of each edgeThe number of subdivisions of each edgeThe points of the B-splineB-조절곡선의 점들If the B-spline is closed or notB-조절곡선이 닫혀있거나 혹은 열려 있다면Create a face if this B-spline is closedCreate a face if this B-spline is closedParameterization factorParameterization factorForce sync pattern placements even when array elements are expandedForce sync pattern placements even when array elements are expandedShow the individual array elementsShow the individual array elementsText color문자 색Line spacing (relative to font size)줄 간격 (글꼴 크기에 상대적)Vertical alignment수직 정렬Maximum number of characters on each line of the text boxMaximum number of characters on each line of the text boxHorizontal alignment수평 정렬The type of frame around the text of this objectThe type of frame around the text of this objectDisplay a leader line or not지시선을 표시하거나 숨김Line width선 두께Line color선 색Defines an SVG pattern.Defines an SVG pattern.Defines the size of the SVG pattern.Defines the size of the SVG pattern.If it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the shape appearance of the layerIf it is true, the objects contained within this layer will adopt the shape appearance of the layerIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageThe line color of the objects contained within this layerThe line color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape appearance of the objects contained within this layerThe shape appearance of the objects contained within this layerThe line width of the objects contained within this layerThe line width of the objects contained within this layerThe draw style of the objects contained within this layerThe draw style of the objects contained within this layerThe transparency of the objects contained within this layerThe transparency of the objects contained within this layerThe line color of the objects contained within this layer, when used on a TechDraw pageThe line color of the objects contained within this layer, when used on a TechDraw pageFont name글꼴 이름Font size글꼴 크기Spacing between text and dimension lineSpacing between text and dimension lineRotate the dimension text 180 degreesRotate the dimension text 180 degreesText Position.
Leave '(0,0,0)' for automatic positionText Position.
Leave '(0,0,0)' for automatic positionText override.
Write '$dim' so that it is replaced by the dimension length.Text override.
Write '$dim' so that it is replaced by the dimension length.The number of decimals to showThe number of decimals to showShow the unit suffix단위 접미사 표시A unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationArrow size화살표 크기Arrow type화살표 유형Rotate the dimension arrows 180 degreesRotate the dimension arrows 180 degreesThe distance the dimension line is extended
past the extension linesThe distance the dimension line is extended
past the extension linesLength of the extension linesLength of the extension linesLength of the extension line
beyond the dimension lineLength of the extension line
beyond the dimension lineShows the dimension line and arrowsShows the dimension line and arrowsThe display length of this section plane이 단면 평면의 표시 길이The size of the arrows of this section plane이 단면 평면의 화살표 크기Defines a texture image (overrides hatch patterns)Defines a texture image (overrides hatch patterns)CommandTransform변환하기QObjectDraft제도Import-Export가져오기 내보내기Draft_AnnotationStyleEditorAnnotation Styles주석 양식Opens an editor to manage or create annotation stylesOpens an editor to manage or create annotation stylesDraft_Arc_3PointsArc From 3 Points3점 호Creates a circular arc from 3 pointsCreates a circular arc from 3 pointsDraft_ArcToolsArc ToolsArc ToolsTools to create various types of circular arcsTools to create various types of circular arcsDraft_ArrayToolsArray ToolsArray ToolsTools to create various types of arrays, including rectangular, polar, circular, path, and point arraysTools to create various types of arrays, including rectangular, polar, circular, path, and point arraysDraft_BezCurveBézier CurveBézier CurveCreates an n-degree Bézier curve. The more points, the higher the degree.Creates an n-degree Bézier curve. The more points, the higher the degree.Draft_CubicBezCurveCubic Bézier CurveCubic Bézier CurveCreates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments.
Control points and properties of each knot can be edited after creation.Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments.
Control points and properties of each knot can be edited after creation.Draft_BezierToolsBézier ToolsBézier ToolsTools to create various types of Bézier curvesTools to create various types of Bézier curvesDraft_CircularArrayCircular Array원형 배열Creates copies of the selected object in a radial pattern with 1 or more circular layersCreates copies of the selected object in a radial pattern with 1 or more circular layersDraft_FlipDimensionFlip DimensionFlip DimensionFlips the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Flips the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Draft_Draft2SketchDraft to SketchDraft to SketchConverts bidirectionally between Draft objects and sketches.
Multiple selected Draft objects are converted into a single sketch.
However, a single sketch with disconnected traces is converted into several individual Draft objects.Converts bidirectionally between Draft objects and sketches.
Multiple selected Draft objects are converted into a single sketch.
However, a single sketch with disconnected traces is converted into several individual Draft objects.Draft_ToggleGridToggle Grid격자 전환Toggles the visibility of the Draft gridToggles the visibility of the Draft gridDraft_AddToGroupAdd to Group모둠에 추가Adds selected objects to a group, or removes them from any groupAdds selected objects to a group, or removes them from any groupDraft_SelectGroupSelect Group모둠 선택Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected.Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected.Draft_AutoGroupAuto-Group자동 모둠Adds new Draft and BIM objects to the selected layer or groupAdds new Draft and BIM objects to the selected layer or groupDraft_AddConstructionAdd to Construction GroupAdd to Construction GroupAdds the selected objects to the construction group,
and changes their appearance to the construction style.
The construction group is created if it does not exist.Adds the selected objects to the construction group,
and changes their appearance to the construction style.
The construction group is created if it does not exist.Draft_AddNamedGroupNew Named Group새 이름 있는 모둠Adds a group with a given nameAdds a group with a given nameDraft_HyperlinkOpen LinksOpen LinksOpens linked documentsOpens linked documentsDraft_AddToLayerAdd to LayerAdd to LayerAdds selected objects to a layer, or removes them from any layerAdds selected objects to a layer, or removes them from any layerDraft_LayerManagerManage LayersManage LayersAllows to modify the layersAllows to modify the layersDraft_SlopeSet SlopeSet SlopeSets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn on the XY-plane.Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn on the XY-plane.Draft_PathArrayPath ArrayPath ArrayCreates copies of the selected object along a selected pathCreates copies of the selected object along a selected pathDraft_PathLinkArrayPath Link ArrayPath Link ArrayCreates linked copies of the selected object along a selected pathCreates linked copies of the selected object along a selected pathDraft_PathTwistedArrayTwisted Path ArrayTwisted Path ArrayCreates twisted copies of the selected object along a selected pathCreates twisted copies of the selected object along a selected pathDraft_PathTwistedLinkArrayTwisted Path Link ArrayTwisted Path Link ArrayCreates twisted linked copies of the selected object along a selected pathCreates twisted linked copies of the selected object along a selected pathDraft_WorkingPlaneProxyWorking Plane ProxyWorking Plane ProxyCreates a proxy object from the current working plane that allows to restore the camera position and visibility of objectsCreates a proxy object from the current working plane that allows to restore the camera position and visibility of objectsDraft_PointArrayPoint ArrayPoint ArrayCreates copies of the selected object at the points of a point objectCreates copies of the selected object at the points of a point objectDraft_PointLinkArrayPoint Link ArrayPoint Link ArrayCreates linked copies of the selected object at the points of a point objectCreates linked copies of the selected object at the points of a point objectDraft_PolarArrayPolar ArrayPolar ArrayCreates copies of the selected object in a polar patternCreates copies of the selected object in a polar patternDraft_SelectPlaneWorking PlaneWorking PlaneDefines the working plane from 3 vertices, 1 or more shapes, or an objectDefines the working plane from 3 vertices, 1 or more shapes, or an objectDraft_SetStyleSet StyleSet StyleSets the default style and can apply the style to objectsSets the default style and can apply the style to objectsDraft_Shape2DViewShape 2D ViewShape 2D ViewCreates a 2D projection of the selected objects on the XY-plane.
The initial projection direction is the opposite of the current active view direction.Creates a 2D projection of the selected objects on the XY-plane.
The initial projection direction is the opposite of the current active view direction.Draft_ShapeStringShape From TextShape From TextCreates a shape from a text string and a specified fontCreates a shape from a text string and a specified fontDraft_Snap_LockSnap Lock포착 잠금Enables or disables snapping globally전역적으로 포착을 활성화 또는 비활성화 합니다Draft_Snap_MidpointSnap Midpoint중간점 포착Snaps to the midpoint of edges모서리의 중간점에 포착합니다Draft_Snap_PerpendicularSnap Perpendicular직교 포착Snaps to the perpendicular points on faces and edges면과 모서리의 직교지점에 포착합니다Draft_Snap_GridSnap Grid격자 포착Snaps to the intersections of grid lines격자의 교차점에 포착합니다Draft_Snap_IntersectionSnap IntersectionSnap IntersectionSnaps to the intersection of 2 edges, and the intersection of a face and an edgeSnaps to the intersection of 2 edges, and the intersection of a face and an edgeDraft_Snap_ParallelSnap Parallel평행 포착Snaps to an imaginary line parallel to straight edgesSnaps to an imaginary line parallel to straight edgesDraft_Snap_EndpointSnap Endpoint끝점 포착Snaps to the endpoints of edgesSnaps to the endpoints of edgesDraft_Snap_AngleSnap Angle각도 포착Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°Draft_Snap_CenterSnap Center중심 포착Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building partsSnaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building partsDraft_Snap_ExtensionSnap ExtensionSnap ExtensionSnaps to an imaginary line that extends beyond the endpoints of straight edgesSnaps to an imaginary line that extends beyond the endpoints of straight edgesDraft_Snap_NearSnap Near근처 포착Snaps to the nearest point on faces and edgesSnaps to the nearest point on faces and edgesDraft_Snap_OrthoSnap OrthoSnap OrthoSnaps to imaginary lines that cross the previous point at multiples of 45°Snaps to imaginary lines that cross the previous point at multiples of 45°Draft_Snap_SpecialSnap Special특수 포착Snaps to special points defined by the objectSnaps to special points defined by the objectDraft_Snap_DimensionsSnap DimensionsSnap DimensionsShows temporary X and Y dimensionsShows temporary X and Y dimensionsDraft_Snap_WorkingPlaneSnap Working PlaneSnap Working PlaneProjects snap points onto the current working planeProjects snap points onto the current working planeDraft_ShowSnapBarShow Snap Toolbar포착 도구 표시Shows the snap toolbar if it is hiddenShows the snap toolbar if it is hiddenDraft_BSplineB-SplineB-조절곡선Creates a multiple-point B-splineCreates a multiple-point B-splineDraft_ApplyStyleApply Current StyleApply Current StyleApplies the current style to the selected objects and groupsApplies the current style to the selected objects and groupsDraft_SubelementHighlightHighlight SubelementsHighlight SubelementsHighlights the subelements of the selected objects, to be able to move, rotate, and scale themHighlights the subelements of the selected objects, to be able to move, rotate, and scale themDraft_ToggleConstructionModeToggle Construction ModeToggle Construction ModeToggles the construction modeToggles the construction modeDraft_ToggleDisplayModeToggle WireframeToggle WireframeSwitches the view style of the selected objects from Flat Lines to Wireframe and backSwitches the view style of the selected objects from Flat Lines to Wireframe and backDraft_WireToBSplineConvert Wire/B-SplineConvert Wire/B-SplineConverts the selected polyline to a B-spline, or the selected B-spline to a polylineConverts the selected polyline to a B-spline, or the selected B-spline to a polylineDxfImportDialogDXF ImportDXF ImportImport AsImport AsCreates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench.Creates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench.Editable Draft objectsEditable Draft objectsCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing.Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing.Editable Part primitivesEditable Part primitivesCreates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Individual Part shapes (recommended)Individual Part shapes (recommended)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for viewing very large files with maximum performance.Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for viewing very large files with maximum performance.Fused Part shapes (fastest)Fused Part shapes (fastest)File summaryFile summaryWarning경고Do not show this dialog again이 대화 상자를 다시 표시하지 않음