Dialog Annotation Styles Editor 注釈スタイルエディター Renames the selected style 選択されたスタイルの名前を変更 Rename 名前の変更 Deletes the selected style 選択したスタイルを削除 New 新規作成 Delete 削除 Layers Manager レイヤーマネージャー Select All 全て選択 Toggle Visibility 表示/非表示を切り替え Isolate 分離 Cancel キャンセル OK OK Import styles from json file jsonファイルからスタイルをインポート Export styles to json file jsonファイルへスタイルをエクスポート The font to use for texts and dimensions 文字と寸法に用いられるフォント Font name フォント名 The font size in system units システム単位の文字の大きさ The width of the lines シートの幅 px px The color of lines and arrows 線と矢印の色 Line and arrow color 線と矢印の色 The distance the dimension line is additionally extended 寸法線がさらに延長される距離 Dimension line overshoot 寸法線の超過量 Extension line length 寸法補助線の長さ The distance the extension lines are additionally extended beyond the dimension line 寸法補助線が寸法線を超えて延長される距離 Font size 文字の大きさ The line spacing for multi-line texts and labels (relative to the font size) 複数行の文字とラベルの行間(文字の大きさに対する相対値) The color of texts, dimension texts and label texts テキスト、寸法テキスト、ラベルテキストの色 Text color テキストの色 Units 単位 A multiplier factor that affects the size of texts and markers テキストとマーカーのサイズに影響を与える乗算係数 Style Name スタイル名 The name of the style. Existing style names can be edited. スタイルの名前です。既存のスタイル名を編集できます。 Add new… 新規追加… Scale multiplier 尺度の倍率 The type of the starting arrows or markers to use for dimensions and labels 寸法とラベルに使用する開始矢印またはマーカーの種類 Start arrow type 開始矢印の種類 None なし The size of the starting arrows or markers in system units システム単位での開始矢印やマーカーのサイズ Start arrow size 開始矢印のサイズ The type of the ending arrows or markers to use for dimensions and labels 寸法とラベルに使用する終了矢印またはマーカーの種類 End arrow type 終了矢印の種類 The size of the ending arrows or markers in system units システム単位での終了矢印やマーカーのサイズ End arrow size 終了矢印のサイズ If it is checked it will show the unit next to the dimension value チェックされている場合、寸法の値に続いて単位が表示されます。 Show unit 単位を表示 Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit mm、m、in、ftのような有効な長さの単位を指定して、この単位で寸法値を強制的に表示します。 Unit override 単位の上書き The number of decimals to show for dimension values 寸法の値に表示する小数点以下の桁数 Dimension Details 寸法の詳細 The distance between the dimension text and the dimension line 寸法線と寸法テキストの間隔 Text spacing テキストの間隔 Annotations 注釈 Texts テキスト Line spacing factor 行間係数 Lines and Arrows 線と矢印 Displays the dimension line 寸法線を表示 Show dimension line 寸法線を表示 Line width 線幅 Dot 点 Circle 円 Arrow 矢印 Tick 目盛 Tick-2 目盛り-2 Shows the unit next to the dimension value 寸法値の横に単位を表示 Number of decimals 小数点以下桁数 Extension line overshoot 寸法補助線の超過量 The length of the extension lines 寸法補助線の長さ DraftCircularArrayTaskPanel Circular Array 円形整列 Distance from one layer of objects to the next layer of objects オブジェクトのレイヤーから次のオブジェクトのレイヤーまでの距離 Radial distance 半径距離 Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. 整列円の要素から同じ円内の次の要素までの距離。 ゼロにはできません。 Tangential distance 接線距離 The number of symmetry lines in the circular array 円形整列内の対称線の数 Center of Rotation 回転中心 Resets the coordinates of the center of rotation 回転中心の座標をリセット Reset Point ポイントリセット Symmetry 対称 Number of concentric circles to create, including a copy of the original object. It must be at least 2. 元オブジェクトのコピーを含む、作成する同心円の数。 2以上でなければなりません。 Number of concentric circles 同心円の数 The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. 回転軸が通過する点の座標。 プロパティ・エディターより軸自身の方向を変更できます。 X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. チェックされている場合、互いに接触している整列の結果オブジェクトは結合されます。 この機能は「リンク整列」がオフの場合にのみ動作します。 Fuse 結合 If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. チェックされている場合、結果オブジェクトは通常整列ではなく「リンク整列」になります。 複数のコピーを作成する場合、リンク整列の方が効率的ですが結合することはできなくなります。 Link array リンク整列 DraftOrthoArrayTaskPanel Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. 元オブジェクトのコピーを含む、指定方向の整列要素の数。 各方向の値は、1以上でなければなりません。 X X Y Y Z Z Reset X X をリセット Reset Y Y をリセット Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Z方向における要素間の距離。 通常ではZの値のみ必要とし、他に2つの値を与えるとそれぞれの距離に従ってシフトさせます。 負の値を指定すると、それら負の方向にコピーされます。 Orthogonal Array 矩形整列 Toggles between orthogonal and linear mode 直交モードと直線モードの切り替え Switch to Linear Mode 直線モードに切り替え X axis X軸 Y axis Y軸 Z axis Z軸 Number of Elements 要素の数 Currently selected axis 現在選択されている軸 Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. X方向における要素間の距離。 通常ではXの値のみ必要とし、他に2つの値を与えるとそれぞれの距離に従ってシフトさせます。 負の値を指定すると、それら負の方向にコピーされます。 X Intervals X方向の間隔 Resets the distances 距離をリセット Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Y方向における要素間の距離。 通常ではYの値のみ必要とし、他に2つの値を与えるとそれぞれの距離に従ってシフトさせます。 負の値を指定すると、それら負の方向にコピーされます。 Y Intervals Y方向の間隔 Z Intervals Z方向の間隔 Reset Z Zをリセット If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. チェックされている場合、互いに接触している整列の結果オブジェクトは結合されます。 この機能は「リンク整列」がオフの場合にのみ動作します。 Fuse 結合 If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. チェックされている場合、結果オブジェクトは通常整列ではなく「リンク整列」になります。 複数のコピーを作成する場合、リンク整列の方が効率的ですが結合することはできなくなります。 Link array リンク整列 DraftPolarArrayTaskPanel Polar Array 軸周整列 Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. 軸周配置のスイープ角度。 マイナスの角度では反対方向に軸周パターンが生成されます。 絶対最大値は360度です。 Polar angle 軸周角度 Number of elements in the array, including a copy of the original object. It must be at least 2. 元オブジェクトのコピーを含む、整列内の要素の数。 2以上でなければなりません。 Number of elements 要素の数 The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. 回転軸が通過する点の座標。 プロパティ・エディターより軸自身の方向を変更できます。 Center of Rotation 回転中心 Resets the coordinates of the center of rotation 回転中心の座標をリセット Reset Point ポイントリセット X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. チェックされている場合、互いに接触している整列の結果オブジェクトは結合されます。 この機能は「リンク整列」がオフの場合にのみ動作します。 Fuse 結合 If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. チェックされている場合、結果オブジェクトは通常整列ではなく「リンク整列」になります。 複数のコピーを作成する場合、リンク整列の方が効率的ですが結合することはできなくなります。 Link array リンク整列 DraftShapeStringGui ShapeString シェイプストリング X X Y Y Z Z Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system グローバル座標系に対する相対座標。 作業平面座標系を使用する場合はチェックを外します。 Global 全体 Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) フォントファイル (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Text to be made into ShapeString シェイプストリングにするテキスト Enter coordinates or pick a point with the mouse 座標を入力するかマウスで点を選択 Resets the picked point 選択した点をリセット Reset Point ポイントリセット Height 高さ Height of the result 結果の高さ Text テキスト Font file フォントファイル Form Top (XY) 上面 (XY) Front (XZ) 前面 (XZ) Side (YZ) 側面(YZ) Sets the working plane facing the current view 作業平面を現在の視線に相対するよう設定 Working Plane Setup 作業平面のセットアップ Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. 以下のオプションを選択してください。 または3つの頂点、1つ以上のシェイプ、あるいは作業平面プロキシを選択して作業平面を定義し、3Dビューをクリックして確認してください。 Sets the working plane to the XY-plane (ground plane) 作業平面をXY平面(底面)に設定 Sets the working plane to the XZ-plane (front plane) 作業平面をXZ平面(前面)に設定 Sets the working plane to the YZ-plane (side plane) 作業平面をYZ平面(側面)に設定 Align to View 表示に合わせる The working plane will align to the current view each time a command is started 作業平面はコマンドの開始時に現在のビューに整列します。 Automatic 自動 Offset オフセット An optional offset to give to the working plane above its base position. Use this together with one of the buttons above 基本位置の上に作業平面に与える任意のオフセット。 上方にあるボタンの1つと一緒にこれを使用します If this is selected, the working plane will be centered on the current view when pressing one of the buttons above これが選択されている場合、上のボタンから何れかを押したときに、作業平面が現在のビューの中央に配置されます Center plane on view ビューの中心面 Centers the working plane on the current view when pressing one of the buttons above 上記のボタンのいずれかを押した時に、作業平面を現在のビューの中央に配置 Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. または頂点を1つ選択して、現在の 作業平面を方向を変えずに移動。 次に下のボタンを押してください。 Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. 作業平面の方向を変更せずに移動させます。ポイントの指定が無い場合、作業平面はビューの中心へ移動します。 Move Working Plane 作業平面を移動 The color of the grid グリッドの色 Grid color グリッドの色 The distance between grid lines グリッドの間隔 The number of squares between major grid lines 主グリッド線を表示する間隔 Major lines every 主線の間隔 squares 正方形 Grid size グリッドの大きさ The distance at which a point can be snapped to ポイントをスナップできる距離 Center View 表示中心 Resets the working plane to its next position 作業平面を次の位置にリセット Next 次へ Grid spacing グリッド線の間隔 The number of squares in the X- and Y-direction of the grid グリッドのX方向とY方向の正方形の数 Snapping radius スナップ半径 Centers the view on the current working plane 現在の作業平面に表示を合わせる Resets the working plane to its previous position 作業平面を以前の位置にリセット Previous 戻る Load preset プリセットの読み込み Shape シェイプ Ambient shape color シェイプの環境光色 Emissive shape color シェイプの放射光色 Specular shape color シェイプの反射光色 Shape transparency シェイプの透明度 Shape shininess シェイプの光沢度 Other その他 Line color 線の色 Line width 線幅 px px Draw style 描画スタイル Solid ソリッド Dashed 破線 Dotted 点線 DashDot 一点鎖線 Display mode 表示モード Flat Lines 平坦な線 Wireframe ワイヤーフレーム Shaded シェーディング Fill the values below from a stored style preset 保存されたスタイルプリセットで以下の値を埋める Point color 点の色 Point size 点の大きさ Points 点群 Shape color シェイプの色 Annotations 注釈 Extension line length 寸法補助線の長さ Extension line overshoot 寸法補助線の超過量 Text spacing テキストの間隔 Text color テキストの色 Dimensions 寸法 Dot 点 Annotation 注釈 Texts テキスト Line spacing factor 行間係数 The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. 注釈スケールの乗数は 注釈スケールウィジェットで設定されたスケールの逆数です。スケールが1:100の場合、乗数は100です。 Start arrow type 開始矢印の種類 Circle 円 Arrow 矢印 Tick 目盛 Tick-2 目盛り-2 None なし Start arrow size 開始矢印のサイズ End arrow type 終了矢印の種類 End arrow size 終了矢印のサイズ The unit override for dimensions. Leave blank to use the current FreeCAD unit. 寸法の上書き単位。現在のFreeCAD単位を使用する場合は空白のままにします。 Dimension line overshoot 寸法線の超過量 The distance the dimension line is extended past the extension lines 寸法線が寸法補助線を超えて伸びる距離 The color for texts, dimension texts and label texts テキスト、寸法テキスト、ラベルテキストの色 Font name フォント名 The font for texts, dimensions and labels 文字、寸法、ラベルのフォント Font size フォントサイズ The height for texts, dimension texts and label texts テキスト、寸法テキスト、ラベルテキストの高さ The line spacing for multi-line texts and labels (relative to the font size) 複数行の文字とラベルの行間(文字の大きさに対する相対値) Scale multiplier 尺度の倍率 Line and arrow color 線と矢印の色 Style Settings スタイル設定 Saves the current style as a preset 現在のスタイルをプリセットとして保存 Shape Appearance シェイプの外観 Lines and Arrows 線と矢印 Adds a unit symbol to dimension texts 寸法テキストに単位記号を追加 The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. 寸法補助線の長さ。寸法補助線全体とする場合は0を使用します。負の値で寸法補助線の終端と計測点の間隔を定義します。正の値で寸法補助線の最大長さを定義します。長さ寸法でのみ使用されます。 The length of extension lines above the dimension line 寸法線の上の寸法補助線の長さ The space between the dimension line and the dimension text 寸法線と寸法テキストの間隔 Apply the above style to selected object(s) 選択したオブジェクトに上記のスタイルを適用 Apply the above style to all annotations (texts, dimensions and labels) すべての注釈 (テキスト、寸法、ラベル) に上記のスタイルを適用 Show unit 単位を表示 Unit override 単位の上書き Selected 選択 Hatch ハッチング PAT file PATファイル Pattern パターン Scale 尺度 Rotation 回転 Align to face 面に合わせる Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. パターンがベースオブジェクトに配置されます。 設定されていない場合、パターンがグローバル座標系に配置されます。 この設定はTranslateプロパティを変更します。 Pattern files (*.pat *.PAT) パターンファイル (*.pat *.PAT) Gui::Dialog::DlgSettingsDraft Default working plane デフォルトの作業平面 General 標準 The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. 内部での座標操作の小数点以下の桁数(例. 3 = 0.001)。通常、6から8の間の値が最も適しています。 The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. 新しいビューでのデフォルトの作業平面。"自動"を設定した場合、作業平面はコマンド開始時点のビューの方向に自動的に配置されます。さらに、事前選択した平面、またはコマンド実行中に平面上の点が選択された時に位置合わせされます。 XY (Top) XY (平面図) XZ (Front) XZ (正面図) YZ (Side) YZ(側面) If checked, a widget indicating the current working plane orientation appears when picking points チェックされている場合、点のピック時に現在の作業平面の方向を示すウィジェットが表示されます。 If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. チェックされている場合、レイヤーのドロップダウンリストにグループが含まれます。 オブジェクトは自動的にグループに追加されます。 Include groups in layer list レイヤーリストにグループを含める If checked, base objects, instead of created copies, are selected after copying チェックを入れると、作成されたコピーの代わりにベースオブジェクトがコピー処理後に選択されます。 If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. チェックされている場合、ドラフトコマンドはドラフトオブジェクトの代わりにパートプリミティブを作成します。 これは完全にはサポートされておらず、多くのオブジェクトがドラフト編集コマンドでは編集できないことに注意してください。 Create Part primitives if possible 可能な場合はパート・プリミティブを作成 If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. チェックされている場合、Draft DowngradeとDraft Upgradeは面の色を維持します。splitFacesとmakeShellオプションのみ有効。 Keep face colors during downgrade/upgrade ダウングレード/アップグレード中に面の色を維持 If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. チェックされている場合、Draft DowngradeとDraft Upgradeは面の名前を維持します。splitFacesとmakeShellオプションのみ有効。 Keep face names during downgrade/upgrade ダウングレード/アップグレード中に面の名前を維持 This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. 任意の座標フィールドに手動で数字を入力した後、マウスが非アクティブになる遅延時間。 遅延1を設定した場合、数値を入力した後の1秒の間、マウスの動きで意図せず入力値が変更されないようにマウスはそのフィールドを更新しなくなります。 Edit node pick radius ノードの選択半径を編集 The pick radius of edit nodes 編集ノードの選択半径 Label prefix for clones クローンのラベルの接頭辞 The default prefix added to the label of new clones 新規クローンのラベルに追加されるデフォルトの接頭辞 Construction group label 構築グループラベル The default label for the construction geometry group 構築ジオメトリーグループのデフォルトのラベル The default color for Draft objects in construction mode 構築モードでのドラフトオブジェクトのデフォルトの色 Internal precision level 内部の精度レベル Show working plane orientation 作業平面の向きを表示 Command Options コマンドオプション If checked, instructions are displayed in the Report View when using Draft commands チェックされている場合、ドラフトコマンドの使用時にレポートビューに使用方法が表示されます。 Show prompts in the Report View レポートビューにプロンプトを表示 If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. チェックした場合、X座標の代わりにLengthの入力に初期フォーカスが設定されます。 方向を指定し、距離を入力することができます。 Set focus on Length instead of X coordinate X座標の代わりに、長さにフォーカスを設定 Select base objects after copying コピー後にベースオブジェクトを選択 Maximum number of editable objects 編集可能なオブジェクトの最大数 Construction 構築 Construction geometry color 構築ジオメトリの色 Draft classic style Draftクラシックスタイル Bitsnpieces style Bitsnpiecesスタイル Visual 表示 SVG Patterns SVGパターン SVG pattern size SVGパターンの大きさ The default size for SVG patterns. A higher value results in a denser pattern. SVGパターンの既定の大きさ。値が大きいほどパターンの密度が高くなります。 Additional SVG pattern location 追加のSVGパターンの場所 An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns 標準パターンに追加されるパターン定義を含むカスタムSVGファイルのオプションのディレクトリ Drawing View Line Definitions ドローイング・ビューの線の定義 Dashed line definition 破線の定義 An SVG linestyle definition SVGのラインスタイルの定義 Dashdot line definition 鎖線の定義 Dotted line definition 点線の定義 Texts and dimensions テキストと寸法線 Font size 文字の大きさ mm mm Lines and Arrows 線と矢印 Start arrow type 開始矢印の種類 The default symbol displayed at the start of dimension lines 寸法線の始端に表示されるデフォルトの記号 None なし Start arrow size 開始矢印のサイズ The default starting arrow size デフォルトの開始矢印のサイズ End arrow type 終了矢印の種類 The default symbol displayed at the end of dimension lines 寸法線の終端に表示されるデフォルトの記号 End arrow size 終了矢印のサイズ The default ending arrow size デフォルトの終了矢印のサイズ Number of decimals 小数点以下桁数 Dimension Details 寸法の詳細 Extension line overshoot 寸法補助線の超過量 Dimension line overshoot 寸法線の超過量 The default annotation scale multiplier. This is the inverse of the scale set in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. デフォルトの注釈スケールの倍率。これはドラフトスケールウィジェットで設定された拡大縮小率の逆数です。スケールが1:100の場合、倍率は100になります。 Texts テキスト The default height for texts, dimension texts and label texts テキスト、寸法テキスト、ラベルテキストのデフォルトの高さ Line spacing factor 行間係数 The default line spacing for multi-line texts and labels (relative to the font size) 既定の複数行の文字とラベルの行間(文字の大きさに対する相対値) Scale multiplier 尺度の倍率 Texts and Dimensions テキストと寸法 Annotations 注釈 Font name フォント名 The default font for texts, dimensions and labels 文字、寸法、ラベルのデフォルトのフォント Text color テキストの色 The default color for texts, dimension texts and label texts テキスト、寸法テキスト、ラベルテキストのデフォルトの色 If checked, the dimension line is displayed by default チェックを入れると、寸法線がデフォルトで表示されます Show dimension line 寸法線を表示 Line width ライン幅 The default line width 既定の線幅 px px Dot 点 Circle 円 Arrow 矢印 Tick 目盛 Tick-2 目盛り-2 Line and arrow color 線と矢印の色 The default color for lines and arrows 既定の線と矢印の色 Units 単位 If checked, a unit symbol is added to dimension texts by default チェックされている場合、デフォルトで単位記号が寸法テキストに追加されます。 Show unit 単位を表示 Unit override 単位の上書き The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. デフォルトの寸法の単位設定。mやcmなどの単位を入力します。FreeCADで定義されている現在の単位を使用する場合は空白のままにします。 The default number of decimal places for dimension texts 寸法テキストの小数点以下のデフォルトの桁数 The optional string inserted between the feet and inches values in dimensions 寸法のフィートとインチの値の間に挿入されるオプション文字列 The default distance the dimension line is extended past the extension lines 寸法線が寸法補助線を超えて伸びるデフォルトの距離 Extension line length 寸法補助線の長さ The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. 寸法補助線のデフォルトの長さ。寸法補助線全体とする場合は0を使用します。負の値で寸法補助線の終端と計測点の間隔を定義します。正の値で寸法補助線の最大長さを定義します。長さ寸法でのみ使用されます。 The default length of extension lines above the dimension line 寸法線の上の寸法補助線のデフォルトの長さ The default space between the dimension line and the dimension text 寸法線と寸法テキストのデフォルトの間隔 Text spacing テキストの間隔 Feet separator フィートの区切り文字 SVG SVG Import style インポートスタイル Use default style from Part/PartDesign パート/パートデザインのデフォルトのスタイルを使用 Use original SVG style オリジナルのSVGスタイルを使用 If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. チェックした場合、単位変換を行いません。 SVGファイル内の 1単位は1ミリメートルに変換されます。 Disable unit scaling 単位スケーリングを無効 Add wires for invalid faces 無効な面のワイヤーを追加 Method for importing SVG object colors SVGオブジェクトの色をインポートする方法 If face generation results in a degenerated face, a raw wire from the original shape is added 面生成で面が縮退した場合、 元の形状のままのワイヤーが追加されます。 Check to cut shapes according to the even/odd SVG fill rule 偶数/奇数のSVGの塗りつぶし規則に従って形状を切断する場合はチェック Apply Cuts 切断を適用 Coordinate precision (crucial for detecting closed paths) 座標精度(閉じたパスの検出で重要になります) The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. 内部の座標演算で使用される小数点以下の桁数(例: 3 = 0.001)。 インポート対象の絶対サイズによって最適な値は異なります。典型的な値は1から5の間です。 Export style エクスポートスタイル Style of SVG file to write when exporting a sketch スケッチをエクスポートする際に、SVGファイルのスタイルも書き出す Translated (for print & display) 変換 (印刷&表示用) Raw (for CAM) 変換無し (CAM用) All white lines will appear in black in the SVG for better readability against white backgrounds すべての白い線は白い背景に対する読みやすさを向上させるため、SVGでは黒として表示されます Convert white line color to black 白い線の色を黒に変換 Maximum segment length for discretized arcs 円弧の離散化時の最大セグメント長さ Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. OpenCASCADEのバージョンが6.8よりも古いバージョンだと、円弧の投影をサポートしていません。 この場合、円弧は小さな線分に分割されます。 この値は最大セグメント長です。 OCA OCA Import Options インポートオプション Imports the areas (3D faces) too 領域(3D面)もインポート Import OCA areas OCA領域をインポート DXF DXF Allow FreeCAD to automatically download and update the DXF libraries DXF ライブラリの自動的なダウンロードと更新を FreeCAD に許可 Import インポート All objects containing faces will be exported as 3D polyface meshes 面を含むすべてのオブジェクトは3Dポリフェースメッシュとしてエクスポートされます Project exported objects along current view direction エクスポートされるオブジェクトを現在のビュー方向と平行に投影 Use colors from the DXF file DXFファイルの色を使用する Join geometry ジオメトリを結合 Use standard font size for texts 標準フォントサイズを使用 Render polylines with width 幅のあるポリラインをレンダリング Ellipse export is poorly supported. Use this to export them as polylines instead. 楕円のエクスポートは十分にサポートされていません。代わりにこれを使用してポリラインとしてエクスポートしてください。 Treat ellipses and splines as polylines 楕円とスプラインをポリラインとして扱う If checked, this preferences dialog will be shown each time you import or export a DXF file. チェックすると、DXFファイルをインポート、エクスポートする際に毎回この設定ダイアログが表示されます。 Show the importer dialog when importing a file ファイルインポート時にインポート機能ダイアログを表示 Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. 旧来のPythonのインポート機能を使用。このインポート機能は比較的機能が充実していますが、速度が遅く、外部ライブラリを必要とします。 Use legacy importer 旧来のインポート機能を使用 Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. 旧来のPythonのエクスポート機能を使用。このエクスポート機能は比較的機能が充実していますが、速度が遅く、外部ライブラリを必要とします。 Use legacy exporter 旧来のエクスポート機能を使用 Automatic Update (Legacy Only) 自動アップデート(レガシーのみ) If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. チェックされている場合、FreeCADは旧来のインポート機能が必要とするPythonライブラリをダウンロードし更新します。これはアドオン・マネージャーから手動で「dxf_library」アドオンをインストールすることでも行えます。 Import As 別名でインポート Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. 完全にパラメトリックなドラフトオブジェクトを作成します。ブロック定義は再利用可能なオブジェクト(パートコンパウンド)としてインポートされ、インスタンスは「App::Link」オブジェクトとなってブロック構造は維持されます。ドラフトワークベンチとの完全な統合に最適です。 Editable Draft objects (highest fidelity, slowest) 編集可能なドラフトオブジェクト(最も忠実、最も遅い) DxfImportMode DXFインポートモード Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. パラメトリックなパートオブジェクト(例 Part::Line, Part::Circle)を作成します。ブロック定義は再利用可能なオブジェクト(パートコンパウンド)としてインポートされ、インスタンスは「App::Link」オブジェクトとなってブロック構造は維持されます。スクリプトベースの後処理とパートワークベンチとの統合に最適です。 Editable Part primitives (high fidelity, slower) 編集可能なパートプリミティブ(高い忠実性、比較的低速) Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. DXFエンティティーごとに非パラメトリックなシェイプを作成します。 ブロック定義は 再利用可能なオブジェクト(パートコンパウンド)としてインポートされ、インスタンスは「App::Link」オブジェクトとなってブロック構造は維持されます。参照と計測に適しています。 Individual Part shapes (balanced, recommended) 個別のパート形状(バランス型、推奨) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. 1つのレイヤーあたりのすべてのジオメトリーを単一の編集不可能なシェイプにマージします。ブロック構造は維持されず、ジオメトリーはレイヤーのシェイプの一部になります。非常に大きなファイルを最大パフォーマンスでインポートして表示するのに最適です。 Fused Part shapes (lowest fidelity, fastest) 結合したパート形状(最も忠実性が低く、最も高速) Import Settings インポート設定 Global scaling factor 全体の拡大縮小率 Scale factor to apply to DXF files on import. The factor is the conversion between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 インポート時にDXFファイルに適用する拡大縮小係数。係数はDXFファイルの単位とミリメートルとの変換に使用されます。例. ファイルがミリメートル単位の場合: 1、センチメートル単位の場合: 10、メートルの場合: 1000、インチの場合: 25.4、フィートの場合: 304.8 If checked, text, mtext, and dimension entities will be imported as Draft objects チェックされている場合、テキスト、マルチテキスト、寸法エンティティーがドラフトオブジェクトとしてインポートされます If checked, point entities will be imported チェックされている場合、点エンティティーがインポートされます Points 点群 If checked, entities from the paper space will also be imported. By default, only model space is imported チェックされている場合、ペーパースペースのエンティティーもインポートされます。デフォルトでは、モデルスペースのみがインポートされます。 Paper space objects ペーパースペースのオブジェクト If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions チェックされている場合、(名前が * で始まる)匿名ブロック もインポートされます。 これらはハッチングや寸法によく使用されます。 Anonymous blocks (*-blocks) 匿名ブロック(*-blocks) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) チェックされている場合、ハッチングオブジェクトの境界は閉じたワイヤーとしてインポートされます。 (従来のインポート機能のみ) Hatch boundaries ハッチング境界 Appearance 外観 If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied チェックされている場合、色はできるだけDXFファイルで指定されたとおりに設定されます。 それができない場合はデフォルトのFreeCADの色が適用されます。 If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) チェックされている場合、インポートされたテキストはDXFドキュメントで定義された サイズではなく標準のドラフトテキストのサイズになります(従来のインポート機能のみ) Advanced processing 高度な処理 If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) チェックされている場合、旧来のインポート機能は一致する幾何オブジェクトをワイヤーとして結合しようとします。大きなファイルでは遅くなる可能性があります(旧来のインポート機能のみ) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) チェックされている場合、幅プロパティを持つポリラインはその幅を表す面としてレンダリングされます(旧来のインポート機能のみ) If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting チェックされている場合、旧来のインポート機能はドラフトオブジェクトやパートオブジェクトではなくスケッチャーオブジェクトの作成を試みます。この設定は「名前を付けてインポート」設定より優先されます。 Create sketches スケッチを作成 Export Options エクスポートオプション Maximum spline segment スプラインの最大セグメント数 Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. 各ポリラインセグメントの最大長さ。「0」でスプライン全体が直線セグメントとなります。 Export 3D objects as polyface meshes 3D オブジェクトをポリフェイスメッシュとしてエクスポート TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. TechDrawのビューはブロックとしてエクスポートされます。 R12形式より後のDXFテンプレートではエクスポートできない場合があります。 Export TechDraw Views as blocks TechDrawのビューをブロックとしてエクスポート Exported objects will be projected to reflect the current view direction エクスポートされたオブジェクトは現在のビュー方向を反映するように投影されます Shift Shift Always snap 常にスナップ Grid and Snapping グリッドとスナップ If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. チェックした場合、グリッドの左下に人物の輪郭が表示されます。「グリッドの枠を表示」が有効になっている場合のみ機能します。 Major lines every 主線の間隔 The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. 主グリッド線の間隔。 主グリッド線はグリッド線よりも太いです。 squares 正方形 Snapping and Modifier Keys スナップと修飾キー Snap modifier スナップ修飾 The Snap modifier key スナップの修飾キー Ctrl Ctrl Alt Alt Constrain modifier 拘束修飾 Alt modifier Altの代わりに別のキーを使用 The Alt modifier key. The function of this key depends on the command. Alt修飾キー。 このキーの機能はコマンドによって異なります。 If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. チェックされている場合、グリッドは常に新しいビューで表示されます。 アクティブなビューでこれを変更するにはドラフトの「グリッドの表示を切り替え」を使用します。 The distance between grid lines グリッド線の間隔 The maximum number of objects Draft Edit is allowed to process at the same time ドラフト編集で同時に処理できるオブジェクトの最大数 Grid グリッド Always show the grid 常にグリッドを表示 If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. チェックされている場合、新しいビューのコマンド中にグリッドが表示されます。 アクティブなビューにこれを変更するには、ドラフトの「グリッドの表示を切り替え」を使用します。 Show the grid during commands コマンドの中にグリッドを表示 If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner チェックした場合、グリッドの枠を表示します。 枠の左下に主グリッド線の間隔を表示します。 Show grid border グリッドの枠を表示 Show human figure 人の姿を表示 If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system チェックした場合、グリッドの主軸の2本がグローバル座標系のX軸、Y軸、Z軸に一致したときに、グリッドの主軸を赤、緑、青で表示します。 Use colored axes 色の軸を使用 Grid spacing グリッド線の間隔 Grid size グリッドの大きさ The number of squares in the X- and Y-direction of the grid グリッドのX方向とY方向の正方形の数 Grid transparency グリッドの透明度 % % Grid color グリッドの色 The constrain modifier key 拘束の修飾キー Snap symbol style スナップ記号のスタイル Mouse delay マウスの遅延 seconds 秒 The style for snap symbols スナップ記号のスタイル Snap symbol color スナップ記号の色 The color for snap symbols スナップ記号の色 If checked, snapping is activated without the need to press the Snap modifier key チェックされている場合、スナップ修飾キーを押さなくてもスナップが有効になります。 The color of the grid グリッドの色 The overall transparency of the grid グリッドの透明度 DWG DWG This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. FreeCAD が DWG ファイルを DXF へ変換するために使う方法です。「自動」が選択された場合、FreeCAD は以下のコンバーターを表示順に従って検索します。FreeCAD がコンバーターを見つけられなかった場合、特定のコンバーターを選んで、以下で指定する必要があります。LibreDWG を使用する場合は「dwg2dxf」、ODA ファイルコンバーターを使用する場合は「ODAFileConverter」、QCAD pro 版を使用する場合は「dwg2dwg」を選択してください。 Automatic 自動 DWG Conversion DWG 変換 Conversion method 変換方法 LibreDWG LibreDWG ODA Converter ODA コンバーター QCAD pro QCAD pro Path to file converter ファイルコンバーターのパス The path to your DWG file converter executable DWG ファイルコンバーターの実行ファイルのパス <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">無し:</span<head/>> DXFオプションはWGファイルにも適用されます。</p></body></html> Relative 相対 R R Continue 続行 Close 閉じる O O Copy コピー L L Interface インターフェース F F Select edge エッジを選択 Subelement mode サブ要素モード B B C C Exit 終了 A A Increase radius 半径を大きくする Decrease radius 半径を小さくする E E Q Q Length 長さ Wipe ワイプ W W U U Global 全体 In-Command Shortcuts コマンド内ショートカット G G Make face 面を作成 Undo 元に戻す N N Cycle snap サイクル・スナップ Add hold ホールドを追加 Set working plane 作業平面を設定 Snap スナップ S S Restrict X X 制限 X X Restrict Y Y 制限 Y Y Restrict Z Z 制限 Z Z Recenter 中心再設定 D D UI Options UIオプション If checked, the Draft Snap toolbar will only be visible during commands チェックされている場合、ドラフトスナップツールバーはコマンド中にのみ表示されます。 Only show the Draft Snap toolbar during commands ドラフトスナップツールバーはコマンド中のみ表示 If checked, the Draft Snap Widget is displayed in the Draft Status Bar チェックされている場合、ドラフトスナップウィジェットがドラフトのステータスバーに表示されます。 Show the Draft Snap Widget in the Draft Workbench ドラフトワークベンチにドラフトスナップウィジェットを表示 If checked, the Draft Scale Widget is displayed in the Draft Status Bar チェックされている場合、ドラフトスケールウィジェットがドラフトのステータスバーに表示されます。 Show the Draft Scale Widget in the Draft Workbench ドラフトワークベンチにドラフトスケールウィジェットを表示 draft Relative 相対 Global 全体 Continue 続行 If checked, the command will not finish until pressing the command button again チェックされている場合、再びコマンドボタンを押すまでコマンドが終了しなくなります。 If checked, the next dimension will be placed in a chain with the previously placed Dimension チェックした場合、次の寸法は前に配置された寸法とともに連鎖内に配置されます。 Close 閉じる Set Working Plane 作業平面を設定 Select Edge エッジを選択 Copy コピー Wipe ワイプ All shapes must be coplanar シェイプは全て同一平面上にある必要があります。 Selected shapes must define a plane 選択したシェイプは平面を定義する必要があります。 Top 上面 Front 前面 Side サイド Auto 自動 Current working plane: Auto 現在の作業平面: 自動 Current working plane: 現在の作業平面: Selected shapes do not define a plane 選択したシェイプは平面を定義していません。 No previous working plane 前の作業平面がありません。 No next working plane 次の作業平面がありません。 Axes: 軸: Position: 位置: None なし active command: アクティブコマンド: Active Draft command アクティブなドラフトコマンド X coordinate of the point 点のX座標 X X Y Y Z Z Length 長さ Angle 角度 Radius 半径 Creates the text object and finishes the command テキストオブジェクトを作成し、コマンドを終了 Changes the default style for new objects 新規オブジェクトのデフォルトのスタイルを変更 Toggles construction mode 構築モードの切り替え Label Type ラベルタイプ Radius of Circle 円の半径 Coordinates relative to last point or to coordinate system origin if is the first point to set 最初の点が設定されている場合、最後の点からの相対座標または座標系原点 Y coordinate of the point 点のY座標 Z coordinate of the point 点のZ座標 Enter Point 点を入力 Length of the current segment 現在のセグメントの長さ Angle of the current segment 現在のセグメントの角度 Locks the current angle 現在の角度を固定 Radius of the circle 円の半径 Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system グローバル座標系に対する相対座標。 作業平面座標系を使用する場合はチェックを外します。 Finish 完了 Finishes the current drawing or editing operation 現在の製図、または編集操作を終了 Modify Objects オブジェクトを変更 Facebinder Elements フェイスバインダー要素 If checked, an OCC-style offset will be performed instead of the classic offset チェックされている場合、従来のオフセットの代わりにくOCCスタイルのオフセットが行われます。 OCC-style offset OCCスタイルのオフセット Undo 元に戻す If checked, objects will be copied instead of moved チェックされている場合、オブジェクトは移動ではなくコピーされます。 Undo the last segment 最後のセグメントを元に戻す Enter a point with given coordinates 指定座標の点を入力 Make face 面を作成 If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled チェックした場合、オブジェクトは面で埋められます。 「パート・プリミティブを使用」設定が有効な場合は使用できません。 Chained mode 連鎖モード Finishes and closes the current line 現在の線を閉じて終了 Wipes the existing segments of this line and starts again from the last point 直線の既存のセグメントを消去して最後の点から再開 Reorients the working plane on the last segment 最後のセグメントで作業平面を再設定 Selects an existing edge to be measured by this dimension この寸法で計測したい既存エッジを選択 Sides 側辺 Number of sides 辺の数 Modify subelements サブ要素を変更 If checked, subelements will be modified instead of entire objects チェックされている場合、オブジェクト全体ではなくサブ要素が変更されます。 Autogroup off 自動グループ無効 Line 直線 DWire Dワイヤー Circle 円 Arc 円弧 Rotate 回転 Point 点 Label ラベル Offset オフセット Distance 距離 Offset distance オフセットの距離 Trimex トリメックス Local {} ローカル {} Global {} グローバル {} Autogroup: 自動グループ: Faces 面 Remove 削除 Add 追加 Draft ドラフト Converting: 変換中: Conversion successful 変換成功 LibreDWG converter not found LibreDWGコンバーターが見つかりません。 ODA converter not found ODAコンバーターが見つかりません。 QCAD converter not found QCADコンバーターが見つかりません。 No suitable external DWG converter has been found. Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences 適切な外部DWGコンバーターが見つかりません。 メニューの編集→設定→インポート/エクスポート→DWGで手動で設定してください。 詳しくは以下を参照してください: https://wiki.freecad.org/Import_Export_Preferences Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. DWG 変換中にエラーが発生しました。DWG ファイルをスペースと非アルファベット文字を含まないディレクトリパスに移動するか、古い DWG バージョンで保存してみてください。 Custom カスタム Unable to convert input into a scale factor 入力値を拡大縮小率に変換できません。 Set Custom Scale カスタム拡大縮小率を設定 Draft Scale Widget A context menu action used to show or hide this toolbar widget ドラフトスケールウィジェット Set the scale used by Draft annotation tools ドラフト注釈ツールで使用される拡大縮小率を設定 Draft Snap Widget A context menu action used to show or hide this toolbar widget ドラフトスナップウィジェット Set custom annotation scale in format x:x, x=x x:x、x=x形式でカスタム注釈拡大縮小率を設定 No active document. Aborting. アクティブなドキュメントがありません。中止しています。 Wrong input: object {} not in document. 誤った入力: オブジェクト {} がドキュメント内にありません。 Unable to insert new object into a scaled part 拡大縮小したパーツに新しいオブジェクトを挿入できません。 Symbol not implemented. Using a default symbol. 記号が実装されていません。デフォルトの記号を使用しています。 image is Null 画像が未定義です。 filename does not exist on the system or in the resource file ファイル名がシステムまたはリソースファイルに存在しません。 unable to load texture テクスチャーを読み込めません。 Does not have 'ViewObject.RootNode'. 'ViewObject.RootNode' はありません。 Solids: 実線: Faces: 面: Wires: ワイヤー: Edges: エッジ: Vertices: 頂点: Face 面 Wire ワイヤー different types 他の種類 Objects have different placements. Distance between the two base points: オブジェクトが異なる配置にあります。2つの基準点間の距離: %s cannot be modified because its placement is readonly %s は読み取り専用のため変更できません This function will be deprecated in {}. Please use '{}'. この機能は {} で非推奨になります。'{}' を使用してください。 This function will be deprecated. Please use '{}'. この機能は非推奨になります。'{}' を使用してください。 has a different value 異なる値です。 doesn't exist in one of the objects オブジェクトのひとつに存在しません。 %s shares a base with %d other objects. Please check if you want to modify this. %s は %d 個の別のオブジェクトとベースを共有しています。本当に変更対象かを確認してください。 Wrong input: unknown document {} 誤った入力: 不明なドキュメント {} Pick target point 対象点を選択 Create Label ラベルを作成 Pick endpoint of leader line 引出線の終点を選択 Pick text position テキスト位置を選択 Pick first point 一方のコーナーを指定 Edges do not intersect! エッジが交差していません! Create Line 直線を作成 Create Wire ワイヤーを作成 %1 pick next point, snap to first point to close %1 次の点を選択してください。最初の点にスナップして閉じます。 %1 pick next point %1 次の点を選択 Unable to create a wire from the selected objects 選択したオブジェクトからはワイヤーを作成できません。 Polyline ポリライン Pick next point 次の点を選択 Convert to Wire ワイヤーに変換 Select an object to join 結合するオブジェクトを選択 Join Lines 線を結合 Only Draft lines and wires can be joined ドラフト線とワイヤーのみが結合できます。 Selection: 選択: Pick location point 配置点を選択 Create Text テキストを作成 Select an object to convert 変換するオブジェクトを選択 Convert to Sketch スケッチに変換 Convert to Draft ドラフトに変換 Convert Draft/Sketch ドラフト/スケッチを変換 Select an object to move 移動するオブジェクトを選択 Pick start point 始点を選択 Pick end point 終点を選択 No valid subelements selected 有効なサブエレメントが選択されていません Move 移動 Pick center point 中心点を選択 Pick radius 半径を選択 Start angle 開始角度 Pick start angle 開始角度を選択 Aperture angle 開き角 Pick aperture 開きを選択 %1 constrain %1 拘束 %1 snap %1 スナップ %1/%2/%3 switch constraint %1/%2/%3 拘束を切り替え %1 toggle relative %1 相対値の切り替え %1 toggle global %1 グローバル切り替え %1 toggle continue %1 継続の切り替え %1 pick center %1 中心を選択 %1 pick radius %1 半径を選択 %1 pick aperture %1 開口を選択 Create Circle (Part) 円を作成 (パート) Create Circle 円を作成 Create Arc (Part) 円弧を作成 (パート) Create Arc 中心点円弧を作成 Pick aperture angle 開き角を選択 %1 pick start angle %1 開始角度を選択 Arc From 3 Points 3点による円弧 Create Arc From 3 Points 3点から円弧を作成 %1 pick first point %1 最初の点を選択 %1 pick second point %1 2番目の点を選択 %1 pick third point %1 3番目の点を選択 Select an object to edit 編集するオブジェクトを選択 Select a Draft object to edit 編集するドラフトオブジェクトを選択 Edit Node ノードを編集 Too many objects selected, maximum number set to: 選択されたオブジェクトが多すぎます。最大数は次のように設定されます: No edit point found for selected object 選択オブジェクトの中に編集点がありません : this object is not editable : このオブジェクトは編集できません。 Annotation Style Editor 注釈スタイルエディター New Style 新規スタイル Style name スタイル名 Style name required スタイル名が必要です。 No style name specified スタイル名が指定されていません。 Style exists スタイルが存在します。 This style name already exists このスタイル名は既に存在します。 Style in use 使用中のスタイル This style is used by some objects in this document. Proceed? このスタイルはこのドキュメントの一部オブジェクトで使用されています。続行しますか? Rename Style スタイルの名前を変更 New name 新しい名前 Open Styles File スタイルファイルを開く JSON files (*.json *.JSON) JSONファイル (*.json *.JSON) Save Styles File スタイルファイルを保存 JSON file (*.json) JSONファイル (*.json) Select an object to project 投影するオブジェクトを選択 Create 2D View 2Dビューを作成 Create Point 点を作成 %1 pick point %1 点を選択 Select an object to rotate 回転するオブジェクトを選択 Pick rotation center 回転中心を選択 Base angle ベース角度 The base angle to start the rotation from 回転を開始するベース角度 The amount of rotation to perform. The final angle will be the base angle plus this amount. 実行する回転の量。 最終角度はベース角度とこの量の合計になります。 Pick base angle ベース角度を選択 Rotation 回転 Pick rotation angle 回転角度を選択 Add to New Group 新しいグループへ追加 Add to Group グループへ追加 No new selection. Select non-empty groups or objects inside groups. 新しく選択されているものがありません。空でないグループまたはグループ内のオブジェクトを選択してください。 New Layer 新規レイヤー Layer name レイヤー名 Layer Object label レイヤー New layer 新規レイヤー Add to Construction Group 構築グループに追加 New Group 新規グループ Group name グループ名 Group Object label グループ New named group 新しい名前付きグループ Ungroup グループ解除 Group グループ Fillet radius フィレット半径 Radius of the fillet フィレットの半径 Enter radius 半径を入力 Create Fillet フィレットを作成 Fillet cannot be created フィレットを作成できません Polygon 多角形 Create Polygon (Part) 多角形を作成 (パート) Create Polygon 多角形を作成 Select objects to trim or extend トリムまたは延長するオブジェクトを選択 This object is not supported このオブジェクトはサポートされていません Only a single face can be extruded 一面のみ押し出すことができます Trimex does not support this object type トリメックスはこのオブジェクトタイプをサポートしていません Unable to trim these objects, only Draft wires and arcs are supported これらのオブジェクトをトリムすることはできません。サポートされているのはドラフトのワイヤーと円弧のみです。 These objects do not intersect これらのオブジェクトは交差してません Too many intersection points 交点が多すぎます Offset only works on one object at a time 一度にオフセットできるのは1つのオブジェクトだけです Offset of Bézier curves is currently not supported ベジェ曲線のオフセットは現在サポートされていません Pick distance 距離を選択 Offset angle オフセット角度 Unable to trim these objects, too many wires これらのオブジェクトはワイヤーが多すぎてトリミングできません。 B-Spline B-スプライン Create B-Spline B-スプラインを作成 Change Style スタイルの変更 This object does not support possible coincident points このオブジェクトは一致点をサポートしていません Delete Point 点を削除 Add Point 点を追加 Open Wire ワイヤーを開く Close Wire ワイヤーを閉じる Reverse Wire ワイヤーを反転 Active object must have more than 2 points or nodes アクティブオブジェクトは2つ以上の点またはノードが必要 Open Spline スプラインを開く Close Spline スプラインを閉じる Reverse Spline スプラインを反転 Move Arc 円弧を移動 Set First Angle 開始角度を設定 Set Last Angle 終了角度を設定 Set Radius 半径を設定 Invert Arc 円弧を反転 Make Sharp 鋭角にする Make Tangent 平坦にする Make Symmetric 対称にする Reverse Curve 曲線を反転 Open Curve 曲線を開く Close Curve 曲線を閉じる Selection is not a knot ノットが選択されていません。 Endpoint of Bézier curve cannot be smoothed ベジェ曲線の端点はスムージングできません。 Active object must have more than two points/nodes アクティブなオブジェクトには2つ以上の点/節点が必要です。 Bézier Curve ベジェ曲線 Create Bézier Curve ベジェ曲線を作成 Cubic Bézier Curve 3次ベジェ曲線 Click and drag to define next knot 次のノットを定義するためにクリックしてドラッグ %1 click and drag to define first point and knot %1 クリック、ドラッグして最初の点とノットを定義 %1 click and drag to define next point and knot %1 クリック、ドラッグして次の点とノットを定義 Ellipse 楕円 Create Ellipse 楕円を作成 Pick opposite point もう一方のコーナーを指定 %1 pick opposite point %1 対角点を選択 Select faces from existing objects 既存のオブジェクトの面を選択 Select an object to scale 拡大縮小するオブジェクトを選択 Pick base point 基準点を選択 Pick reference distance from base point 基準点からの参照距離を選択 Zero scale factor not allowed 拡大縮小率ゼロは認められません Scale 尺度 Pick new distance from base point 基準点からの新しい距離を選択 Layer レイヤー Create Dimension 寸法を作成 Edge too short! エッジが短すぎます! Select an object to stretch 伸縮するオブジェクトを選択 Pick first point of selection rectangle 選択した長方形の一方のコーナーを指定 Pick the opposite point of the selection rectangle 選択四角形の対角点を選択 Turning a rectangle into a wire 四角形をワイヤーへ変換 Pick start point of displacement 移動の始点を選択 Pick end point of displacement 移動の終点を選択 Stretch 伸縮 Rectangle 四角形 Create Plane 平面を作成 Create Rectangle 長方形を作成 Select an object to mirror 鏡像コピーするオブジェクトを選択 Pick start point of mirror line 鏡像線の始点を選択 Mirror 鏡像 Pick end point of mirror line 鏡像線の終点を選択 Select an object to clone クローンするオブジェクトを選択 Cannot clone objects without a shape, aborting シェイプのないオブジェクトはクローンできません。中断します。 Cannot clone objects without a shape, skipping them シェイプのないオブジェクトはクローンできません。それらはスキップします。 Select an object to upgrade アップグレードするオブジェクトを選択 Upgrade アップグレード Select an object to offset オフセットするオブジェクトを選択 Cannot offset this object type この種類のオブジェクトはオフセットできません。 Pick ShapeString location point シェイプストリングの配置点を選択 Create ShapeString シェイプストリングを作成 Heal 修復 Downgrade ダウングレード Object: オブジェクト: Polar Array 軸周整列 Number of elements must be at least 2 要素の数は少なくとも2でなければなりません。 The angle is above 360 degrees. It is set to this value to proceed. 角度が360度を超えています。続行するとこの値に設定されます。 The angle is below -360 degrees. It is set to this value to proceed. 角度が-360度を下回っています。続行するとこの値に設定されます。 Create Polar Array 軸周整列を作成 Fuse: 結合: Create Link array: リンク整列を作成: Number of elements: 要素の数: Polar angle: 軸周角度: Center of rotation: 回転中心: Orthogonal Array 矩形整列 Number of elements must be at least 1 要素の数は少なくとも1でなければなりません。 In linear mode, at least 1 axis must be selected 直線モードでは、少なくとも1つの軸を選択する必要があります。 Create Orthogonal Array 矩形配列を作成 Create link array: リンク整列を作成: Number of X elements: X 要素の数: Interval X: 間隔 X: Number of Y elements: Y 要素の数: Interval Y: 間隔 Y: Number of Z elements: Z 要素の数: Interval Z: 間隔 Z: Switch to Ortho Mode 直交モードに切り替え X-Axis X 軸 Y-Axis Y軸 Z-Axis Z軸 Switch to Linear Mode 直線モードに切り替え Number of elements 要素の数 Interval 間隔 ShapeString シェイプストリング Default デフォルト Radial distance is zero. Resulting array may not look correct. 周方向距離がゼロです。整列結果が正しく見えない可能性があります。 Radial distance is negative. It is made positive to proceed. 半径方向距離がマイナスです。処理を続けるためプラスにします。 Circular Array 円形整列 At least 1 element must be selected 少なくとも1つの要素を選択する必要があります。 Number of layers must be at least 2 レイヤーの数は少なくとも2でなければなりません。 Selection is not suitable for array 選択対象は整列に適していません。 Tangential distance cannot be 0 接線方向距離は0にはできません。 Tangential distance is negative. It is made positive to proceed. 接線方向距離がマイナスです。処理を続けるためプラスにします。 Create Circular Array 円形整列を作成 Radial distance: 半径距離: Tangential distance: 接線距離: Number of concentric circles: 同心円の数: Symmetry parameter: 対称パラメーター: Font file not found フォントファイルが見つかりません Specified font file is not a file 指定されたフォントファイルはファイルではありません Specified font type is not supported 指定されたフォントタイプはサポートされていません ShapeString: oblique angle must be in the -80 to +80 degree range シェイプストリング:斜体角度は-80度から+80度の範囲でなければなりません ShapeString: string has no wires シェイプストリング:文字列にワイヤーがありません ShapeString: face creation failed for one character シェイプストリング:1文字で面の作成が失敗しました , path object does not have 'Edges'. パスオブジェクトには「エッジ」がありません。 Start Offset too large for path length. Using 0 instead. パスの長さに対して開始オフセットが大きすぎます。代わりに0を使用します。 End Offset too large for path length minus Start Offset. Using 0 instead. パス長さから開始オフセットを引いた値に対して終了オフセットが大きすぎます。代わりに0を使用します。 Length of tangent vector is 0. Copy not aligned. 接線ベクトルの長さが0です。コピーは配置されません。 Length of normal vector is 0. Using a default axis instead. 法線ベクトルの長さが0です。代わりにデフォルトの軸を使用します。 Spacing unit of 0 is not allowed, using default スペース単位が 0 は認められません。デフォルトを使用してください。 Operation would generate too many objects. Aborting 操作によって生成されるオブジェクトが多すぎます。中止しています。 Tangent and normal vectors are parallel. Normal replaced by a default axis. 接線ベクトルと法線ベクトルが平行です。法線ベクトルがデフォルトの軸で置き換えられました。 Cannot calculate normal vector. Using the default normal instead. 法線ベクトルを計算できません。代わりにデフォルトの法線を使用します。 AlignMode {} is not implemented AlignMode {} は実装されていません。 No shape found シェイプが見つかりません。 All shapes must be planar シェイプは全て平面である必要があります。 Points: 点: Wrong input: must be a list or tuple of 3 points exactly. 誤った入力: 3点のリストまたはタプルでなければなりません。 Wrong input: must be list or tuple of 3 points exactly. 誤った入力: 3点のリストまたはタプルでなければなりません。 Placement: 配置: Wrong input: incorrect type of placement. 誤った入力: 配置タイプが正しくありません。 Wrong input: incorrect type of points. 誤った入力: 点タイプが正しくありません。 Cannot generate shape: シェイプを生成できません: Wrong input: base_object not in document. 誤った入力: ベースオブジェクトがドキュメント内にありません。 Wrong input: path_object not in document. 誤った入力: パスオブジェクトがドキュメント内にありません。 Wrong input: must be a number. 誤った入力: 数値でなければなりません。 Wrong input: must be a vector. 誤った入力: ベクトルでなければなりません。 Wrong input: must be a list or tuple of strings, or a single string. 誤った入力: 文字列リスト、文字列タプルまたは文字列でなければなりません。 Wrong input: must be 'Original', 'Frenet', or 'Tangent'. 誤った入力: 「Original」「Frenet」「Tangent」でなければなりません。 Wrong input: must be a number or vector. 誤った入力: 数値またはベクトルでなければなりません。 Input: single value expanded to vector. 入力: ベクトルに展開される1つの値。 Wrong input: must be an integer number. 誤った入力: 整数でなければなりません。 Input: number of elements must be at least 1. It is set to 1. 入力: 要素の数は少なくとも1でなければなりません。1に設定されます。 Wrong input: must be a placement, a vector, or a rotation. 誤った入力: 位置、ベクトル、または回転でなければなりません。 Wrong input: target_object must not be a list. 誤った入力: target_object はリストであってはなりません。 Wrong input: target_object not in document. 誤った入力: target_object オブジェクトがドキュメント内にありません。 Wrong input: subelements must be a list or tuple of strings, or a single string. 誤った入力: サブ要素は文字列リスト、文字列タプルまたは文字列でなければなりません。 Wrong input: subelement {} not in object. 誤った入力: オブジェクトにサブ要素 {} がありません。 Wrong input: label_type must be a string. 誤った入力: label_type は文字列でなければなりません。 Wrong input: label_type must be one of the following: 誤った入力: label_type は次のいずれかでなければなりません: Wrong input: must be a list of strings or a single string. 誤った入力: 文字列リストまたは文字列でなければなりません。 Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. 誤った入力: 「Horizontal」「Vertical」「Custom」のいずれかの文字列でなければなりません。 Wrong input: points {} must be a list of at least two vectors. 誤った入力: 点 {} 少なくとも2つのベクトルのリストでなければなりません。 Direction is not 'Custom'; points won't be used. 方向が「Custom」ではありません。点は使用されません。 Wrong input: must be a list of two elements. For example, [object, 'Edge1']. 誤った入力: 2つの要素のリストでなければなりません。例. [object, 'Edge1']。 Wrong input: point_object not in document. 誤った入力: 点オブジェクトがドキュメント内にありません。 Wrong input: object has the wrong type. 誤った入力: オブジェクトが不適切な型です。 This function is deprecated. Do not use this function directly. この機能は非推奨です。この機能を直接使用しないでください。 Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. 「make_linear_dimension」または「make_linear_dimension_obj」のいずれかを使用してください。 Wrong input: edge_object must not be a list or tuple. 誤った入力: edge_object はリストやタプルであってはなりません。 Wrong input: edge_object not in document. 誤った入力: edge_object がドキュメント内にありません。 Wrong input: object doesn't have a 'Shape' to measure. 誤った入力: オブジェクトには測定する「シェイプ」がありません。 Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. 誤った入力: オブジェクトには測定に使用する「頂点」の要素が1つもありません。 Wrong input: must be an integer. 誤った入力: 整数でなければなりません。 i1: values below 1 are not allowed; will be set to 1. i1: 1より小さい値は許可されていません。1に設定されます。 Wrong input: vertex not in object. 誤った入力: オブジェクトに頂点がありません。 i2: values below 1 are not allowed; will be set to the last vertex in the object. i2: 1より小さい値は許可されていません。オブジェクトの最後の頂点に設定されます。 Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. 誤った入力: オブジェクトには測定に使用する「エッジ」の要素が1つもありません。 index: values below 1 are not allowed; will be set to 1. インデックス: 1より小さい値は許可されていません。1に設定されます。 Wrong input: index doesn't correspond to an edge in the object. 誤った入力: インデックスがオブジェクトのエッジに対応していません。 Wrong input: index doesn't correspond to a circular edge. Wrong input: must be a string, 'radius' or 'diameter'. 誤った入力: 「radius」または「diameter」の文字列でなければなりません。 Wrong input: must be a list with two angles. 誤った入力: 2つの角度を持つリストでなければなりません。 Wrong input: must be a number or quantity. 誤った入力: 数字または数量でなければなりません。 Layers レイヤー Wrong input: it must be a string. 誤った入力: 文字列でなければなりません。 Wrong input: must be a tuple of three floats 0.0 to 1.0. 誤った入力: 0.0から1.0の範囲の3つの浮動小数点数のタプルでなければなりません。 Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. 誤った入力: 「実線」「破線」「点線」または「鎖線」でなければなりません。 Wrong input: must be a number between 0 and 100. 誤った入力: 0から100の範囲の数値でなければなりません。 Edit 編集 Flatten 平面化 Upgrade: Unknown force method: アップグレード: 不明なメソッドを強制: Found 1 block: exploding it ブロックが1つ見つかりました:分解します Found 1 multi-solids compound: exploding it マルチソリッドなコンパウンドが1つ見つかりました:分解します Found 1 parametric object: breaking its dependencies パラメトリックなオブジェクトが1つ見つかりました:依存関係を破棄します Downgrade: Unknown force method: ダウングレード: 不明な強制メソッド: Found 1 array: exploding it 整列が1つ見つかりました:分解します Found 2 objects: subtracting them オブジェクトが2つ見つかりました:減算を行います Found several faces: splitting them 複数の面が見つかりました:分割します Found several faces: subtracting them from the first one 複数の面が見つかりました: 最初の面から残りを減算します Unable to downgrade these objects これらのオブジェクトはダウングレードできません Found 1 face: extracting its wires 面が1つ見つかりました:ワイヤーを抽出します Found only wires: extracting their edges ワイヤーのみ見つかりました:エッジを抽出します No object given オブジェクトが指定されていません。 The two points are coincident 2点が一致しています mirrored 鏡像 Found 1 solidifiable object: solidifying it ソリッド化可能なオブジェクトが1つ見つかりました:ソリッド化します Found 2 objects: fusing them オブジェクトが2つ見つかりました:結合します Found groups: closing open wires inside グループが見つかりました: 内部の開いているワイヤーを閉じます Found meshes: turning them into Part shapes メッシュが見つかりました: パートシェイプへ変換します Found object with several coplanar faces: refining them 同一平面上にある複数の面を持つオブジェクト見つかりました: 高精度化します Found 1 closed sketch object: creating a face from it 閉じたスケッチオブジェクトが1つ見つかりました:面を作成します Found closed wires: creating faces 閉じたワイヤーが見つかりました: 面を作成します Found several wires or edges: wiring them 複数のワイヤー、エッジが見つかりました:ワイヤー化します Found several non-treatable objects: creating compound 複数の修復不能なオブジェクトが見つかりました:コンパウンドを作成します Unable to upgrade these objects これらのオブジェクトはアップグレードできません。 Found 1 open wire: closing it 開いたワイヤーが1つ見つかりました:閉じます Found 1 non-parametric object: replacing it with a Draft object パラメトリックでないオブジェクトが1つ見つかりました: ドラフトオブジェクトに置き換えます Found points: creating compound 点が見つかりました:コンパウンドを作成します Text テキスト No Target 対象がありません Invalid label type 無効なラベルの種類 Tag not available for object オブジェクトに使用できないタグ Material not available for object オブジェクトに使用できないマテリアル Position not available for (sub)object (サブ)オブジェクトに使用できない位置 Length not available for (sub)object (サブ)オブジェクトに使用できない長さ Area not available for (sub)object (サブ)オブジェクトに使用できない面積 Volume not available for (sub)object (サブ)オブジェクトに使用できない体積 Opening Multiple Links 複数のリンクを開きます Multiple links found 複数のリンクが見つかりました This may lead to the opening of various windows 様々なウィンドウが開くことになるかもしれません。 File not found: ファイルが見つかりません: Opening hyperlink ハイパーリンクを開く Select 3 vertices, one or more shapes or an object to define a working plane 作業平面を定義する3つの頂点、1つ以上の形状またはオブジェクトを選択 Do you want to update the SVG pattern options of existing objects in all opened documents? 全てのドキュメントの既存のオブジェクトのSVGパターンオプションを更新しますか? Sketch is too complex to edit: it is suggested to use the default Sketcher editor スケッチが複雑すぎて編集できません: デフォルトのスケッチャーエディターを使用することをお勧めします。 Create layer レイヤーを作成 Remove From Layer レイヤーから削除 Add to New Layer 新しいレイヤーに追加 Remove from layer レイヤーから削除 Add to new layer 新しいレイヤーに追加 Add to layer レイヤーに追加 Layers change レイヤーを変更 Flip Dimension 寸法を反転 Toggle Grid グリッドを切り替え Change Slope 傾斜を変更 Select exactly 2 objects, the base object and the path object, before calling this command このコマンドを呼び出す前に、ベース・オブジェクトとパス・オブジェクトの2つのオブジェクトを選択してください。 Create Path Array パス整列を作成 Create Path Twisted Array パスねじれ整列を作成 Select exactly 2 objects, the base object and the point object, before calling this command このコマンドを呼び出す前に、ベース・オブジェクトとポイント・オブジェクトの2つのオブジェクトを選択してください。 Create Point Array 点整列を作成 Click anywhere on a line to split it 分割する線の任意の場所をクリック Split Line 線を分割 No active Draft toolbar アクティブなドラフトツールバーがありません Construction Mode 構築モード Toggle Display Mode 表示モードを切り替え 2 edges are needed 2つのエッジが必要です。 Edges are not connected or radius is too large エッジが接続されていないか、半径が大きすぎます。 Unable to build facebinder フェイスバインダーを構築できません。 No valid faces for facebinder フェイスバインダーのための有効な面がありません。 Unable to build facebinder, resuming with sew disabled フェイスバインダーを構築できません。縫い合わせを無効にして再開します。 Converting flat B-spline faces of facebinder to planar faces failed フェイスバインダーの平面B-スプライン面から平面への変換に失敗しました。 Activate Layer レイヤーをアクティブ化 Reassign Properties of Layer レイヤーのプロパティを再割り当て Select Layer Contents レイヤーの内容を選択 Add New Layer 新しいレイヤーを追加 Reassign Properties of All Layers すべてのレイヤーのプロパティを再割り当て Merge Layer Duplicates レイヤーの重複をマージ The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. DXF形式を処理するためにFreeCADが必要とするDXFインポート/エクスポート用ライブラリーがシステム内に見つかりません。 FreeCADにこれらのライブラリーのダウウンロードを許可するために、以下のいずれかを行って下さい: 1 - Draftワークベンチを読み込み 2 - メニューの 編集→設定→インポート-エクスポート→DXF→ダウンロードを有効にする またはライブラリー https://github.com/yorikvanhavre/Draft-dxf-importer の説明に従ってを手動でダウンロードします。 FreeCADでこれらライブラリーのダウンロードを有効にするためにYesを選択します。 PAT file not found PATファイルが見つかりません Specified PAT file is not a file 指定されたPATファイルはファイルではありません Specified file type is not supported 指定されたファイルタイプはサポートされていません Pattern not found in PAT file PATファイル内にパターンが見つかりません Workbench Draft Creation ドラフト作成 Draft Annotation ドラフト注釈 Draft Modification ドラフト変更 Draft Utility ドラフトユーティリティ Draft Snap ドラフトスナップ &Drafting ドラフト(&D) &Annotation 注釈(&A) &Modification 変更(&M) &Utilities ユーティリティ(&U) Arc Tools 円弧ツール Bézier Tools ベジェツール Array Tools 整列ツール Draft Fillet フィレット Delete original objects 元のオブジェクトを削除 Create chamfer 面取りを作成 Save style スタイルを保存 Name of this new style この新しいスタイルの名前 Warning 警告 Name exists. Overwrite? 名前が存在します。上書きしますか? Error: json module not found. Unable to load style エラー:json モジュールが見つかりません。スタイルを読み込めません。 Error: json module not found. Unable to save style エラー:json モジュールが見つかりません。スタイルを保存できません。 Slope 勾配 True True False False Scale 尺度 X-factor X係数 Y-factor Y係数 Z-factor Z係数 Uniform scaling 均一な拡大縮小 Copy コピー Modify subelements サブ要素を変更 Pick From/To Points 点から選択 Edit Scale 拡大縮小を編集 Create a clone クローンを作成 _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry:最初/最後の点を一致させて曲線を閉じました。ジオメトリーは更新されていません。 Writing camera position カメラ位置を書き込み Writing objects shown/hidden state オブジェクトの表示/非表示の状態を書き込み On オン Name 名前 Line Width 線の太さ Draw Style 描画スタイル Line Color 線の色 Face Color 面の色 Line Print Color 印刷時の線の色 Transparency 透明度 New Layer 新規レイヤー Custom カスタム Label ラベル Position 位置 Length 長さ Area 面積 Volume ボリューム Tag タグ Material マテリアル Label + Position ラベル + 位置 Label + Length ラベル + 長さ Label + Area ラベル + 面積 Label + Volume ラベル + 体積 Label + Material ラベル + マテリアル Create Clone クローンを作成 Choose a base object before using this command このコマンドを使用する前にベースオブジェクトを選択してください Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. オフセット方向が定義されていません。最初にオブジェクトのどちらか一方にマウスを動かして方向を指定してください。 Point object does not have a discrete point, it cannot be used for an array 点オブジェクトに離散点がありません。整列には使用できません。 Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager DXFライブラリーのダウンロードに失敗しました。 メニューのツール→アドオンマネージャーからDXFライブラリーアドオンを手動でインストールしてください。 importOCA OCA: found no data to export OCA: エクスポートするデータが見つかりませんでした successfully exported エクスポートに成功 ImportAirfoilDAT Did not find enough coordinates 十分な座標が見つかりませんでした ImportSVG Unknown SVG export style, switching to Translated 未知の SVG エクスポートスタイルです。変換モードに切り替えます。 The export list contains no object with a valid bounding box エクスポート対象リストに有効なバウンディングボックスを持つオブジェクトが含まれていません。 Draft_Label Label ラベル Creates a label, optionally attached to a selected object or subelement ラベルを作成し、必要に応じて選択したオブジェクトまたはサブ要素にアタッチ Draft_Line Line 直線 Creates a 2-point line 2点による線を作成 Draft_Wire Polyline ポリライン Creates a polyline ポリラインを作成 Draft_Hatch Hatch ハッチング Creates hatches on the faces of a selected object 選択したオブジェクトの面にハッチングを作成 Draft_Join Join 接合 Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. 選択した線またはポリラインを1つのオブジェクトに結合します。 線が始点または終点で点を共有している必要があります。 Draft_Text Text テキスト Creates a multi-line annotation 複数行の注釈を作成 Draft_Move Move 移動 Moves the selected objects. If the "Copy" option is active, it creates displaced copies. 選択したオブジェクトを移動します。 「Copy」オプションがオンの場合、置換されたコピーが作成されます。 Draft_Arc Arc 円弧 Creates a circular arc from a center point and a radius 中心点と半径から円弧を作成 Draft_Edit Edit 編集 Edits the active object アクティブなオブジェクトを編集 Draft_Point Point 点 Creates a point 点を作成 Draft_Rotate Rotate 回転 Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. 選択したオブジェクトを回転します。 「Copy」オプションがオンの場合、回転したコピーが作成されます。 Draft_Fillet Fillet フィレット Creates a fillet between 2 selected edges 2つの選択したエッジの間にフィレットを作成 Draft_Polygon Polygon 多角形 Creates a regular polygon (triangle, square, pentagon…) 正多角形(三角形、正方形、五角形… )を作成 Draft_Split Split スプリット Splits the selected line or polyline at a specified point 選択した線またはポリラインを指定した点で分割 Draft_Trimex Trimex トリメックス Trims or extends the selected object, or extrudes single faces 選択したオブジェクトをトリミングまたは延長するか、あるいは単一面を押し出し Draft_Circle Circle 円 Creates a circle (full circular arc) 円を作成(全円弧) Draft_Ellipse Ellipse 楕円 Creates an ellipse 楕円を作成 Draft_Facebinder Facebinder フェイスバインダー Creates a facebinder from the selected faces 選択した面からフェイスバインダーを作成 Draft_OrthoArray Array 整列 Creates copies of the selected object in an orthogonal pattern 選択したオブジェクトのコピーを矩形パターンで作成 Draft_Scale Scale 尺度 Scales the selected objects from a base point 選択したオブジェクトを基準点から拡大縮小 Draft_Layer New Layer 新規レイヤー Adds a layer to the document. Objects added to this layer can share the same visual properties. ドキュメントにレイヤーを追加します。 レイヤーに追加されたオブジェクトは、同じ表示プロパティを共有できます。 Draft_Dimension Dimension 寸法 Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges 直線エッジ、円形エッジ、選択した2点間の寸法、または2つの直線エッジ間の角度寸法を作成 Draft_Stretch Stretch 伸縮 Stretches the selected objects 選択したオブジェクトを伸縮 Draft_Rectangle Rectangle 四角形 Creates a 2-point rectangle 2点による長方形を作成 Draft_Mirror Mirror 鏡像 Mirrors the selected objects along a line defined by 2 points 2点で定義された線に沿って選択したオブジェクトを鏡像コピー Draft_Clone Clone クローン Creates a clone of the selected objects 選択したオブジェクトのクローンを作成 Draft_Upgrade Upgrade アップグレード Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. 選択したオブジェクトをより複雑なシェイプへアップグレード。 操作結果はオブジェクトの種類によって代わり、続けて複数回アップグレードを行えます。 例えば、選択したオブジェクトを1つに結合したり、単純なエッジをパラメトリックなポリラインに変換したり、閉じたエッジを面やパラメトリックなポリゴンへ変換したり、複数の面を1つの面に統合したりすることが可能です。 Draft_Offset Offset オフセット Offsets the selected object. It can also create an offset copy of the original object. 選択したオブジェクトをオフセットします。 元のオブジェクトのオフセットコピーを作成することもできます。 Draft_Heal Heal 修復 Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. 以前のバージョンのFreeCADで保存された不完全なドラフトオブジェクトを修復。 オブジェクトが選択されている場合、そのオブジェクトだけ修復を試みます。 それ以外の場合はアクティブなドキュメント内の全てのオブジェクトの修復を試みます。 Draft_Downgrade Downgrade ダウングレード Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. 選択したオブジェクトをより単純なシェイプへダウングレード。 操作結果はオブジェクトの種類によって代わり、続けて複数回ダウングレードを行えます。 例えば、3Dのソリッドを別れた面、ワイヤー、さらにはエッジへ分解できます。また面同士の減算も可能です。 App::Property The placement of the base point of the first line 最初の線の基点の位置 The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. このオブジェクトによって表示されるテキスト。 文字列のリストで、リスト内の各要素がそれぞれの行に表示されます。 Text string テキスト文字列 Font file name フォントファイル名 Height of text 文字列の高さ Horizontal and vertical alignment 水平方向と垂直方向の配置 Height reference used for justification 位置揃えで使用される高さ参照 Keep left margin and leading white space when justification is left 左揃え時に左マージンと先頭スペースを維持 Scale to ensure cap height is equal to size 大文字の上端高さがサイズと等しくなるよう拡大縮小 Inter-character spacing 文字間隔 Oblique (slant) angle 斜体 (傾斜) 角度 Fill letters with faces 文字の面張り Fuse faces if faces overlap, usually not required (can be very slow) 面が重なった場合に面を結合します。通常は不要です (非常に遅くなることがあります) 。 The base object used by this object このオブジェクトで使用されているベースオブジェクト The PAT file used by this object このオブジェクトで使用されるPATファイル The pattern name used by this object このオブジェクトで使用されているパターン名 The pattern scale used by this object このオブジェクトで使用されるパターンの拡大縮小率 The pattern rotation used by this object このオブジェクトで使用されるパターンの回転量 If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) False に設定すると、ハッチは平行移動せずにそのまま面に適用されます (非XY面では間違った結果になる可能性があります)。 The objects included in this clone このクローンに含まれるオブジェクト The scale factor of this clone このクローンの拡大縮小率 If Clones includes several objects, set True for fusion or False for compound クローンに複数のオブジェクトが含まれている場合、 Trueに設定すると結合、Falseに設定するとコンパウドを作成。 Always create a compound 常にコンパウンドを作成 Start angle of the arc 円弧の開始角度 End angle of the arc (for a full circle, give it same value as First Angle) 円弧の終了角度(完全な円の場合、開始角度と同じ値になります) Radius of the circle 円の半径 Create a face 面を作成 The area of this object このオブジェクトの面積 The objects that are part of this layer このレイヤーの一部であるオブジェクト Number of faces 面の数 Radius of the control circle 制御円の半径 How the polygon must be drawn from the control circle 制御円から多角形を描く方法 Radius to use to fillet the corners 角のフィレットで使用する半径 Size of the chamfer to give to the corners 角の面取りのサイズ The base object that will be duplicated. 重複するベースオブジェクト。 The object along which the copies will be distributed. It must contain 'Edges'. コピーがそれに沿って配置されるオブジェクト。「エッジ」を含んでいる必要があります。 Number of copies to create. 作成するコピーの数。 Rotation factor of the twisted array. ツイスト整列の回転係数。 Show the individual array elements (only for Link arrays) 個々の整列要素を表示 (リンク整列のみ) The placement for each array element 各整列要素の配置 The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. 引出線の先端の位置。 この点は矢印または別の記号で装飾できます。 Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. 「Label Type」に従って「Text」として表示されるプロパティーを持つオブジェクトやオプションのサブ要素。 「Label Type」が「Custom」に設定されている場合は「Target」は使用されません。 The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. 引出線を定義する点のリスト。通常は3点のリストです。 最初の点はテキスト位置、つまり「Placement」、 最後の点は線の先端、つまり「Target Point」になります。 中間の点は「Straight Direction」と「Straight Distance」の値の 選択・設定に従って自動で計算されます。 「Straight Direction」が「Custom」に設定されている場合は 「Points」プロパティには任意の点のリストを設定できます。 The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. 引出線の直線部分の方向。 「Custom」 が選択されている場合、「Points」属性にカスタムリストを 設定することで引き出し線の点を指定できます。 The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. 引出線の直線部分の長さ。 方向を持つ距離です。「Straight Direction」の値に従って、 マイナスの場合は線がテキストの左または下に描かれ、 それ以外の場合は右または上に描かれます。 The placement of the 'Text' element in 3D space 3D空間での「Text」要素の配置 The text to display when 'Label Type' is set to 'Custom' 「Label Type」が「Custom」に設定されている場合に表示するテキスト The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. このラベルによって表示されるテキスト このプロパティーは読み取り専用で、「Label Type」、 「Target」に定義されたオブジェクトによって最終的なテキストが決まります。 「Label Type」が「Custom」に設定されている場合のみ「Custom Text」が表示されます。 The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like BIM objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. このラベルによって表示される情報の種類 「Custom」が選択されている場合、「Custom Text」の内容が使用されます。 他の種類では「Target」で定義されるオブジェクトから自動計算される文字列になります。 「Tag」や「Material」は BIMオブジェクトなど、そのプロパティーを持つオブジェクトでのみ動作します。 「位置」「長さ」「面積」のプロパティーは「Target」のメイン・オブジェクト、または 指定された場合はサブ要素「VertexN」「EdgeN」「FaceN」からそれぞれ抽出されます。 General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. 注釈に一貫した効果を及ぼす全般的な拡大縮小率であり、 同じ比率でテキストや線の装飾を拡大縮小します。 Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. このオブジェクトに適用する注釈スタイル。 保存されたスタイルを使用するとビュープロパティの一部が読み取り専用になります。 「注釈スタイルエディター」ツールからスタイルを変更すると編集できるようになります。 The base object that will be duplicated ベースオブジェクトが重複しています。 List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. 「Path Object」の繋がったエッジのリスト。 設定されている場合はそれらサブ要素のみに沿ってコピーが作成されます。 「Path Object」全体に沿ってコピーを作成する場合はこのプロパティーを空欄のままにしてください。 Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode 「Original」または「Tangent」配置モードを使用する際に「Vertical Vector」をローカルZ方向として強制的に使用 Number of copies to create 作成するコピーの数 Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. 各コピーに適用される追加の移動。 シェイプの中心と基準点の差を調整するのに便利です。 Alignment vector for 'Tangent' mode 「Tangent」モードでの配置ベクトル Direction of the local Z axis when 'Force Vertical' is true 「Force Vertical」がTrueの場合のローカルZ軸方向 Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. パスに沿ったコピーの向き指定方法 - Original: Xは曲線接線、Yは法線、Zは外積の方向。 - Frenet: パスに沿ったローカル座標系に追従するようオブジェクトを配置。 - Tangent: 「Original」と同様ですがローカルX軸が「Tangent Vector」に前もって合わせられます。 「Original」「Tangent」でより適切な結果を得るには「Force Vertical」をTrueに設定しておくと良いかもしれません。 Walk the path backwards. パスを後ろ向きに進行 How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. コピーの間隔の決め方。 - 固定数: 利用可能なパスの長さ(開始オフセットと終了オフセットを差し引いた長さ)をnで均等に分割します。 - 固定間隔: 「開始オフセット」から開始し、パスに沿って固定距離分だけ移動した後に新しいコピーを配置します。 - 固定数と間隔: 「固定間隔」と同じですが、指定したコピー数で停止します。 Base fixed distance between elements. 要素間の基本的な固定距離 Use repeating spacing patterns instead of uniform spacing. 均等間隔の代わりに繰り返し間隔パターンを使用 Spacing is multiplied by a corresponding number in this sequence. このシーケンスでは、対応する数値が間隔に乗算されます。 Length from the start of the path to the first copy. パスの開始位置から最初のコピーまでの長さ Length from the end of the path to the last copy. パスの終了位置から最後のコピーまでの長さ Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. コピーを「Align Mode」に応じた向きでパスに沿って配置します。 設定されていない場合、コピーは元のベース・オブジェクトと同じ方向になります。 The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. 作成する整列のタイプ。 - 矩形: コピーをグローバルなX、Y、Zの軸方向に配置 - 軸周: 指定された角度まで、中心と軸によって定義された方向に、円弧に沿ってコピーを配置 - 円形: ベースオブジェクトを囲む同心円上にコピーを配置 Specifies if the copies should be fused together if they touch each other (slower) 互いに接触した場合にコピーを結合するかどうかを指定 (処理が遅くなります) Number of copies in X-direction X方向のコピー数 Number of copies in Y-direction Y方向のコピー数 Number of copies in Z-direction Z方向のコピー数 Distance and orientation of intervals in X-direction X方向の区間の距離と向き Distance and orientation of intervals in Y-direction Y方向の区間の距離と向き Distance and orientation of intervals in Z-direction Z方向の区間の距離と向き The axis direction around which the elements in a polar or a circular array will be created 軸周整列または円形整列の要素が作成される軸方向 Center point for polar and circular arrays. The 'Axis' passes through this point. 軸周整列、円形整列の中心点。 「Axis」がこの点を通ります。 The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. 「Axis」「Center」の値を上書きする、データム線などの軸オブジェクト。 その配置、位置、回転量が軸周整列、円形整列の作成時に使用されます。 「Axis」「Center」を手作業で設定できるようにするにはこのプロパティーを空欄のままにしてください。 Number of copies in the polar direction 軸周方向のコピー数 Distance and orientation of intervals in 'Axis' direction 「軸」方向の区間の距離と向き Angle to cover with copies コピーを敷きつめる角度 Distance between concentric circles 同心円の間の距離 Distance between copies in the same circle 同じ円内のコピー間の距離 Number of concentric circle. The 'Base' object counts as one circle. 同心円の数。「Base」オブジェクトは1つの円として数えられます。 A parameter that determines how many symmetry planes the circular array will have 円形整列の対称面の数を決定するパラメーター Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. 整列内の要素の合計数。 整列のパラメーターに依存するためこのプロパティは読み取り専用です。 Base object that will be duplicated ベースオブジェクトが重複しています。 Object containing points used to distribute the copies. コピーの配置に使用される点を含むオブジェクト Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. 整列内のコピーの数。 「Point Object」内の点に依存する数値であるためこのプロパティーは読み取り専用です。 Additional placement, shift and rotation, that will be applied to each copy 各コピーに適用される追加の配置、平行移動、回転。 The base object this 2D view must represent この2Dビューが表現する必要のあるベースオブジェクト The projection vector of this object このオブジェクトの投影ベクトル The way the viewed object must be projected 表示オブジェクトの投影方向 The indices of the faces to be projected in Individual Faces mode 個別面モードで投影される面のインデックス Show hidden lines かくれ線を表示 Fuse wall and structure objects of same type and material 壁と構造物を同じ種類とマテリアルに結合 Tessellate Ellipses and B-splines into line segments 楕円とB-スプラインを線分セグメントにテッセレーションする For Cutlines and Cutfaces modes, this leaves the faces at the cut location カットラインモード、カットフェイスモードでカット位置の面を残します。 Length of line segments if tessellating Ellipses or B-splines into line segments 線分セグメントにテッセレーションする楕円やB-スプラインの線分セグメントの長さ If this is True, this object will include only visible objects True の場合、このオブジェクトには表示されているオブジェクトのみが含まれます。 A list of exclusion points. Any edge touching any of those points will not be drawn. 除外する点のリスト。これらの点のいずれかに触れるエッジは描画されません。 A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. 除外するオブジェクトの名前のリスト。リストにある名前に一致する可視オブジェクトはすべて描画されません。 If this is True, only solid geometry is handled. This overrides the base object's Only Solids property True の場合、ソリッドジオメトリーのみが処理されます。この処理はベースオブジェクトの Only Solids プロパティを上書きします。 If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property True の場合、適用可能であれば切断面の境界に内容がクリップされます。これはベースオブジェクトの Clip プロパティを上書きします。 This object will be recomputed only if this is True. これが True の場合にのみこのオブジェクトは再計算されます。 The points of the Bezier curve ベジエ曲線の点 The degree of the Bezier function ベジエ関数の次数 Continuity 続行 If the Bezier curve should be closed or not ベジエ曲線を閉じるかどうか Create a face if this curve is closed この曲線が閉じている場合、面を作成 The length of this object このオブジェクトの長さ The placement of this object このオブジェクトの配置 X Location X位置 Y Location Y位置 Z Location Z位置 Start angle of the elliptical arc 楕円弧の開始角度 End angle of the elliptical arc (for a full circle, give it same value as First Angle) 楕円弧の終了角度(完全な楕円の場合、開始角度と同じ値を設定) Minor radius of the ellipse 楕円の短半径 Major radius of the ellipse 楕円の長半径 Area of this object このオブジェクトの面積 The start point of this line. この線の始点 The end point of this line. この線の終点 The length of this line. この線の長さ Radius to use to fillet the corner. 角のフィレットで使用する半径 The normal direction of the text of the dimension 寸法テキストの法線方向 The object measured by this dimension この寸法で測定するオブジェクト The object, and specific subelements of it, that this dimension is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. この寸法で計測するオブジェクトとその固有サブ要素。 さまざまな指定方法があります。 - オブジェクトとそのエッジの1つ - オブジェクトとその頂点の2つ - 円弧オブジェクトとそのエッジ A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. 寸法線、またはその延長線が通過する点。 - 直線寸法の場合、このプロパティーは寸法線が計測オブジェクトにどれだけ近づくかを制御します。 - 半径寸法の場合、計測半径、計測直径を表示する寸法線の方向を制御します。 - 角度寸法の場合、計測角度を表示する寸法円弧の半径を制御します。 Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. 寸法線の始点。 半径寸法の場合は円弧の中心です。 直径寸法の場合は円弧上の点です。 Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. 寸法線の終点。 半径または直径寸法の場合は、円弧上の点です。 The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. 寸法線の方向。 (0,0,0) のままにした場合、方向は自動計算されます。 The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. 計測値。 この値は「Start」「End」プロパティから計算されるため、このプロパティは読み取り専用です。 「Linked Geometry」が円弧や円の場合、「Diameter」プロパティに依存して「Distance」は半径または直径になります。 When measuring circular arcs, it determines whether to display the radius or the diameter value 円弧を計測する際に、半径、直径のどちらを表示するかを決定します。 Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. 寸法線の開始角度 (円弧)。 円弧は反時計回りに描画されます。 Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. 寸法線の終了角度 (円弧)。 円弧は反時計回りに描画されます。 The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. 円弧の寸法線の中心点。 通常、2つの線分、またはそれらの延長線が交差する点で、その間の測定角度が計測結果となります。 The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. 計測値。 値は「First Angle」と「Last Angle」プロパティから計算されるため、このプロパティーは読み取り専用です。 Length of the rectangle 四角形の幅 Height of the rectangle 四角形の高さ Horizontal subdivisions of this rectangle この四角形の水平方向の細分割数 Vertical subdivisions of this rectangle この四角形の垂直方向の細分割数 Linked faces リンクされた面 Specifies if splitter lines must be removed 分割線を削除する必要があるかどうかを指定 An optional extrusion value to be applied to all faces すべての面に適用するオプションの押し出し値 An optional offset value to be applied to all faces すべての面に適用するオプションのオフセット値 This specifies if the shapes sew シェイプの縫い合わせを行うかどうかを指定 The area of the faces of this Facebinder このフェイスバインダーの面積 The components of this block このブロックのコンポーネント The vertices of the wire ワイヤーの頂点 If the wire is closed or not ワイヤーが閉じているかどうか The base object is the wire, it's formed from 2 objects ベースオブジェクトは2つのオブジェクトから形成されたワイヤーです。 The tool object is the wire, it's formed from 2 objects ツールオブジェクトは2つのオブジェクトから形成されたワイヤーです。 The start point of this line この線の始点 The end point of this line この線の終点 The length of this line この線の長さ Create a face if this object is closed このオブジェクトが閉じている場合、面を作成 The number of subdivisions of each edge 各エッジの再分割数 The points of the B-spline B-スプラインの点 If the B-spline is closed or not B-スプラインが閉じているかどうか Create a face if this B-spline is closed このB-スプラインが閉じている場合、面を作成 Parameterization factor パラメーター化係数 Force sync pattern placements even when array elements are expanded 整列要素が展開されている場合でもパターン配置を強制的に同期 Show the individual array elements 個々の整列要素を表示 Text color テキストの色 Line spacing (relative to font size) 行間隔(フォント サイズに対する相対値) Vertical alignment 垂直方向の配置 Maximum number of characters on each line of the text box テキストボックスの各行の最大文字数 Horizontal alignment 水平方向の配置 The type of frame around the text of this object このオブジェクトのテキストを囲む枠の種類 Display a leader line or not 引出線の表示・非表示 Line width ライン幅 Line color 線の色 Defines an SVG pattern. SVGパターンを定義します Defines the size of the SVG pattern. SVGパターンの大きさを定義します If it is true, the objects contained within this layer will adopt the line color of the layer Trueの場合、このレイヤーに含まれるオブジェクトにはレイヤーの線の色が適用されます。 If it is true, the objects contained within this layer will adopt the shape appearance of the layer True の場合、このレイヤー内に含まれるオブジェクトにはレイヤーに設定されたシェイプの外観が適用されます。 If it is true, the print color will be used when objects in this layer are placed on a TechDraw page True の場合、このレイヤー内のオブジェクトが TechDraw ページに配置された場合に印刷色が使用されます。 The line color of the objects contained within this layer このレイヤーに含まれるオブジェクトの線の色 The shape color of the objects contained within this layer このレイヤーに含まれるオブジェクトのシェイプの色 The shape appearance of the objects contained within this layer このレイヤーに含まれるオブジェクトのシェイプの外観 The line width of the objects contained within this layer このレイヤーに含まれるオブジェクトの線の幅 The draw style of the objects contained within this layer このレイヤーに含まれるオブジェクトの描画スタイル The transparency of the objects contained within this layer このレイヤーに含まれるオブジェクトの透明度 The line color of the objects contained within this layer, when used on a TechDraw page TechDraw ページで使用する場合の、このレイヤーに含まれるオブジェクトの線の色 Font name フォント名 Font size フォントサイズ Spacing between text and dimension line テキストと寸法線との間隔 Rotate the dimension text 180 degrees 寸法テキストを180度回転 Text Position. Leave '(0,0,0)' for automatic position テキスト位置。 自動位置の場合は「(0,0,0)」のままにします。 Text override. Write '$dim' so that it is replaced by the dimension length. 上書きテキスト。 「$dim」と書き込むと、寸法長さで置き換えられます。 The number of decimals to show 表示する小数点以下の桁数 Show the unit suffix 単位表記を表示 A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation 測定値の単位。 システムのデフォルトを使う場合は空白のままにします。 アメリカ建築表記にするには「arch」を使用します。 Arrow size 矢印のサイズ Arrow type 矢印のタイプ Rotate the dimension arrows 180 degrees 寸法矢印を180度回転 The distance the dimension line is extended past the extension lines 寸法線が寸法補助線を超えて伸びる距離 Length of the extension lines 寸法補助線の長さ Length of the extension line beyond the dimension line 寸法線を越える寸法補助線の長さ Shows the dimension line and arrows 寸法線と矢印を表示 The display length of this section plane この断面平面の表示長さ The size of the arrows of this section plane この断面平面の矢印のサイズ Defines a texture image (overrides hatch patterns) テクスチャ画像を定義 (ハッチングパターンを上書き) Command Transform 変換 QObject Draft ドラフト Import-Export インポート/エクスポート Draft_AnnotationStyleEditor Annotation Styles 注釈スタイル Opens an editor to manage or create annotation styles 注釈スタイルを管理、作成するためのエディターを開く Draft_Arc_3Points Arc From 3 Points 3点による円弧 Creates a circular arc from 3 points 3点から円弧を作成 Draft_ArcTools Arc Tools 円弧ツール Tools to create various types of circular arcs 様々な種類の円弧を作成するためのツール Draft_ArrayTools Array Tools 整列ツール Tools to create various types of arrays, including rectangular, polar, circular, path, and point arrays 格子、軸周、円形、経路、点の整列など、さまざまな種類の整列を作成するためのツール Draft_BezCurve Bézier Curve ベジェ曲線 Creates an n-degree Bézier curve. The more points, the higher the degree. N次のベジェ曲線を作成します。点が多いほど、次数が高くなります。 Draft_CubicBezCurve Cubic Bézier Curve 3次ベジェ曲線 Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments. Control points and properties of each knot can be edited after creation. 2次と3次のセグメントで作られたベジェ曲線を作成します。クリックとドラッグでセグメントを定義できます。 制御点と各ノットのプロパティは作成後に編集できます。 Draft_BezierTools Bézier Tools ベジェツール Tools to create various types of Bézier curves 様々な種類のベジェ曲線を作成するためのツール Draft_CircularArray Circular Array 円形整列 Creates copies of the selected object in a radial pattern with 1 or more circular layers 1つ以上の円形レイヤーで、選択したオブジェクトのコピーを放射状に作成 Draft_FlipDimension Flip Dimension 寸法を反転 Flips the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. 選択した寸法(長さ、半径、角度)の法線方向を反転させます。 他のオブジェクトが選択されている場合は無視されます。 Draft_Draft2Sketch Draft to Sketch ドラフトからスケッチへ Converts bidirectionally between Draft objects and sketches. Multiple selected Draft objects are converted into a single sketch. However, a single sketch with disconnected traces is converted into several individual Draft objects. ドラフトオブジェクトとスケッチを相互に変換。 複数選択されたドラフトオブジェクトは1つのスケッチに変換されます。 また繋がっていない1つのスケッチは複数の別れたドラフトオブジェクトに変換されます。 Draft_ToggleGrid Toggle Grid グリッドを切り替え Toggles the visibility of the Draft grid ドラフトグリッドの表示を切り替え Draft_AddToGroup Add to Group グループへ追加 Adds selected objects to a group, or removes them from any group 選択したオブジェクトをグループに追加、または全てのグループから削除 Draft_SelectGroup Select Group グループを選択 Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. 選択したグループの内容を選択します。グループでないオブジェクトを選択している場合は、内部のグループの内容が選択されます。 Draft_AutoGroup Auto-Group 自動グループ Adds new Draft and BIM objects to the selected layer or group 選択したレイヤーまたはグループに新しいドラフトオブジェクト、BIMオブジェクトを追加 Draft_AddConstruction Add to Construction Group 構築グループに追加 Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it does not exist. 選択したオブジェクトを構築グループに追加し、 その外観を構築スタイルに変更します。 構築グループが存在しない場合は作成します。 Draft_AddNamedGroup New Named Group 新しい名前付きグループ Adds a group with a given name 指定した名前でグループを追加 Draft_Hyperlink Open Links リンクを開く Opens linked documents リンクされたドキュメントを開く Draft_AddToLayer Add to Layer レイヤーに追加 Adds selected objects to a layer, or removes them from any layer 選択したオブジェクトをレイヤーに追加、または全てのレイヤーから削除 Draft_LayerManager Manage Layers レイヤーの管理 Allows to modify the layers レイヤーの変更を許可 Draft_Slope Set Slope 傾斜を設定 Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn on the XY-plane. 点のZ値を変更することで選択した線に傾斜を設定します。 ポリラインを選択した場合は各線分に対して傾斜変形を適用します。 傾斜では常にZ値を変更するので、このコマンドはXY平面に描かれた直線のドラフト線のみで正しく動作します。 Draft_PathArray Path Array パス整列 Creates copies of the selected object along a selected path 選択したパスに沿って選択したオブジェクトのコピーを作成します。 Draft_PathLinkArray Path Link Array パスリンク整列 Creates linked copies of the selected object along a selected path 選択したパスに沿って選択したオブジェクトのリンクコピーを作成します。 Draft_PathTwistedArray Twisted Path Array ねじれパス整列 Creates twisted copies of the selected object along a selected path 選択したパスに沿って選択したオブジェクトのねじれたコピーを作成します。 Draft_PathTwistedLinkArray Twisted Path Link Array ねじれパスリンク整列 Creates twisted linked copies of the selected object along a selected path 選択したパスに沿って選択したオブジェクトのねじれたリンクコピーを作成します。 Draft_WorkingPlaneProxy Working Plane Proxy 作業平面プロキシ Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objects 現在の作業平面から、カメラ位置とオブジェクト表示状態を復元できるプロキシオブジェクトを作成 Draft_PointArray Point Array 点整列 Creates copies of the selected object at the points of a point object 点オブジェクトの点位置に、選択したオブジェクトのコピーを作成します。 Draft_PointLinkArray Point Link Array 点リンク整列 Creates linked copies of the selected object at the points of a point object 点オブジェクトの点位置に、選択したオブジェクトのリンクコピーを作成します。 Draft_PolarArray Polar Array 軸周整列 Creates copies of the selected object in a polar pattern 選択したオブジェクトのコピーを軸周パターンで作成 Draft_SelectPlane Working Plane 作業平面 Defines the working plane from 3 vertices, 1 or more shapes, or an object 3つの頂点、1つ以上のシェイプ、またはオブジェクトから作業平面を定義 Draft_SetStyle Set Style スタイルを設定 Sets the default style and can apply the style to objects デフォルトのスタイルを設定します。スタイルはオブジェクトに適用できます。 Draft_Shape2DView Shape 2D View 2Dビュー形状 Creates a 2D projection of the selected objects on the XY-plane. The initial projection direction is the opposite of the current active view direction. 選択したオブジェクトの2D投影をXY平面上に作成します。 最初の投影方向は現在のアクティブなビュー方向の反対です。 Draft_ShapeString Shape From Text テキストからシェイプへ Creates a shape from a text string and a specified font テキスト文字列と指定されたフォントからシェイプを作成 Draft_Snap_Lock Snap Lock スナップのロック Enables or disables snapping globally 全体でスナップの有効/無効を切り替え Draft_Snap_Midpoint Snap Midpoint 中点スナップ Snaps to the midpoint of edges エッジの中点にスナップします。 Draft_Snap_Perpendicular Snap Perpendicular 垂直スナップ Snaps to the perpendicular points on faces and edges 面とエッジの垂直点にスナップします。 Draft_Snap_Grid Snap Grid グリッドスナップ Snaps to the intersections of grid lines グリッド線の交点にスナップします。 Draft_Snap_Intersection Snap Intersection 交点スナップ Snaps to the intersection of 2 edges, and the intersection of a face and an edge 2つのエッジの交点、面とエッジの交点にスナップにスナップします。 Draft_Snap_Parallel Snap Parallel 平行スナップ Snaps to an imaginary line parallel to straight edges 直線エッジに平行な仮想的な線へスナップします。 Draft_Snap_Endpoint Snap Endpoint 端点スナップ Snaps to the endpoints of edges エッジの端点にスナップします。 Draft_Snap_Angle Snap Angle 角度スナップ Snaps to the special cardinal points on circular edges, at multiples of 30° and 45° 円形のエッジ上の30°と45°の倍数にあたる特別な基点にスナップします。 Draft_Snap_Center Snap Center 中心スナップ Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building parts 面と円形エッジの中心点、および作業平面プロキシと建築部品の配置点にスナップします。 Draft_Snap_Extension Snap Extension 延長スナップ Snaps to an imaginary line that extends beyond the endpoints of straight edges 直線エッジの端点から延長した仮想的な線にスナップします。 Draft_Snap_Near Snap Near 近接スナップ Snaps to the nearest point on faces and edges 面とエッジの最も近い点にスナップします。 Draft_Snap_Ortho Snap Ortho 正射影スナップ Snaps to imaginary lines that cross the previous point at multiples of 45° 45°の倍数で前の点を横切る仮想的な線にスナップします。 Draft_Snap_Special Snap Special 特殊スナップ Snaps to special points defined by the object オブジェクトによって定義された特別な点にスナップします。 Draft_Snap_Dimensions Snap Dimensions 寸法スナップ Shows temporary X and Y dimensions 一時的な X と Y の寸法を表示 Draft_Snap_WorkingPlane Snap Working Plane 作業平面スナップ Projects snap points onto the current working plane スナップ点を現在の作業平面へ投影します。 Draft_ShowSnapBar Show Snap Toolbar スナップ用ツールバーを表示 Shows the snap toolbar if it is hidden 非表示の場合はスナップ用ツールバーを表示 Draft_BSpline B-Spline B-スプライン Creates a multiple-point B-spline 複数点からなるB-スプラインを作成 Draft_ApplyStyle Apply Current Style 現在のスタイルを適用 Applies the current style to the selected objects and groups 選択したオブジェクトとグループに現在のスタイルを適用 Draft_SubelementHighlight Highlight Subelements サブ要素をハイライト Highlights the subelements of the selected objects, to be able to move, rotate, and scale them 選択したオブジェクトのサブ要素をハイライト表示し、移動、回転、および拡大縮小を可能にします。 Draft_ToggleConstructionMode Toggle Construction Mode 構築モードの切り替え Toggles the construction mode 構築モードの切り替え Draft_ToggleDisplayMode Toggle Wireframe ワイヤーフレームの切り替え Switches the view style of the selected objects from Flat Lines to Wireframe and back 選択したオブジェクトの表示スタイルをフラットラインからワイヤーフレームへ切り替え Draft_WireToBSpline Convert Wire/B-Spline ワイヤー/B-スプライン変換 Converts the selected polyline to a B-spline, or the selected B-spline to a polyline 選択したポリラインをB-スプラインに、またB-スプラインをポリラインに変換 DxfImportDialog DXF Import DXFインポート Import As 別名でインポート Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. 完全にパラメトリックなドラフトオブジェクトを作成します。ブロック定義は再利用可能なオブジェクト(パートコンパウンド)としてインポートされ、インスタンスは「App::Link」オブジェクトとなってブロック構造は維持されます。ドラフトワークベンチとの完全な統合に最適です。 Editable Draft objects 編集可能なドラフトオブジェクト Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing. パラメトリックなパートオブジェクト(例 Part::Line, Part::Circle)を作成します。ブロック定義は再利用可能なオブジェクト(パートコンパウンド)としてインポートされ、インスタンスは「App::Link」オブジェクトとなってブロック構造は維持されます。スクリプトベースの後処理に最適です。 Editable Part primitives 編集可能なパートプリミティブ Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. DXFエンティティーごとに非パラメトリックなシェイプを作成します。 ブロック定義は 再利用可能なオブジェクト(パートコンパウンド)としてインポートされ、インスタンスは「App::Link」オブジェクトとなってブロック構造は維持されます。参照と計測に適しています。 Individual Part shapes (recommended) 個別のパート形状(推奨) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for viewing very large files with maximum performance. 1つのレイヤーあたりのすべてのジオメトリーを単一の編集不可能なシェイプにマージします。ブロック構造は維持されず、ジオメトリーはレイヤーのシェイプの一部になります。非常に大きなファイルを最大パフォーマンスで表示するのに最適です。 Fused Part shapes (fastest) 結合されたパート形状(高速) File summary ファイルの概要 Warning 警告 Do not show this dialog again 今後このダイアログを表示しない