Dialog
Annotation Styles Editor
Editor Gaya Anotasi
Style name
Nama gaya
The name of your style. Existing style names can be edited.
Nama gaya Anda. Nama gaya yang ada dapat diubah.
Add new...
Tambah baru...
Renames the selected style
Ubah nama item yang dipilih
Rename
Namai ulang
Deletes the selected style
Hapus item yang dipilih
Layers manager
Pengelola Susunan
New
Baru
Delete
Hapus
Select all
Pilih semua
Toggle on/off
Beralih hidup/mati
Isolate
Terisolasi
Cancel
Batal
OK
OK
Import styles from json file
Impor gaya dari file json
Export styles to json file
Ekspor gaya ke file json
Text
Teks
The font to use for texts and dimensions
Font yang digunakan untuk teks dan dimensi
Font name
Nama font
The font size in system units
Ukuran font dalam unit sistem
Lines and arrows
Garis dan Panah
Show line
Tampilkan garis
The width of the lines
Lebar garis
px
piksel
The type of arrows or markers to use for dimensions and labels
Jenis tanda panah atau penanda yang digunakan untuk dimensi dan label
The size of the arrows or markers in system units
Ukuran tanda panah atau penanda dalam unit sistem
The color of lines and arrows
Tetapkan warna garis dan teks
Line and arrow color
Warna garis dan penanda
The distance the dimension line is additionally extended
Jarak garis dimensi juga diperpanjang
The distance the extension lines are additionally extended beyond the dimension line
Jarak garis ekstensi juga diperpanjang di luar garis dimensi
Font size
Ukuran fonta
The line spacing for multi-line texts and labels (relative to the font size)
Penjarakan baris untuk teks dan label multi-baris (relatif terhadap ukuran fonta)
Line spacing
Jarak antarbaris
The color of texts, dimension texts and label texts
Warna teks, teks dimensi, dan teks label
Text color
Warna teks
Units
Unit
A multiplier factor that affects the size of texts and markers
Faktor pengali yang mempengaruhi ukuran teks dan penanda
Scale multiplier
Pengganda skala
If it is checked it will show the unit next to the dimension value
Jika dicentang maka akan menampilkan satuan di sebelah nilai dimensi
Show unit
Tampilkan satuan
Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit
Tentukan satuan panjang yang valid seperti mm, m, in, ft, untuk memaksa menampilkan nilai dimensi dalam satuan ini
Unit override
Penggantian unit
The number of decimals to show for dimension values
Jumlah desimal yang akan ditampilkan untuk nilai dimensi
Decimals
Desimal
The distance between the dimension text and the dimension line
Jarak antara teks dimensi dan garis dimensi
Text spacing
Jarak teks
If it is checked it will display the dimension line
Jika dicentang maka akan menampilkan garis dimensi
Line width
Tebal garis
Arrow type
Jenis Panah
Dot
Dot
Circle
Lingkaran
Arrow
Panah
Tick
Centang
Tick-2
Centang-2
Arrow size
Panah ukuran
Dimension details
Rindican dimensi
Dimension overshoot
Dimensi terlampaui
The length of the extension lines
Panjang garis ekstensi
Extension lines
Jalur ekstensi
Extension overshoot
Overshoot ekstensi
DraftCircularArrayTaskPanel
Circular array
Array Melingkar
Distance from one layer of objects to the next layer of objects.
Jarak dari satu lapisan objek ke lapisan objek berikutnya.
Radial distance
Jarak radial
Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.
Jarak dari satu elemen dalam satu ring array ke elemen berikutnya dalam ring yang sama.
Tidak mungkin nol.
Tangential distance
Jarak tangensial
Number of circular layers or rings to create, including a copy of the original object.
It must be at least 2.
Jumlah lapisan atau lingkaran melingkar yang akan dibuat, termasuk salinan objek aslinya.
Setidaknya harus 2.
Number of circular layers
Jumlah lapisan melingkar
The number of symmetry lines in the circular array.
Banyaknya garis simetri pada larik lingkaran.
Symmetry
Simetri
The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.
Koordinat titik yang dilalui sumbu rotasi.
Ubah arah sumbu itu sendiri di editor properti.
Center of rotation
Pusat rotasi
X
X
Y
Y
Z
Z
Reset the coordinates of the center of rotation.
Setel ulang koordinat pusat rotasi.
Reset point
Titik reset
If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.
Jika dicentang, objek yang dihasilkan dalam larik akan menyatu jika saling bersentuhan.
Ini hanya berfungsi jika "Array tautan" tidak aktif.
Fuse
Sekering
If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.
Jika dicentang, objek yang dihasilkan akan berupa "Array tautan", bukan larik biasa. Larik Tautan lebih efisien saat membuat banyak salinan, tetapi tidak dapat digabungkan bersama.
Link array
Susunan tautan
DraftOrthoArrayTaskPanel
Orthogonal array
Orthogonal array
Number of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.
Jumlah elemen dalam array dalam arah yang ditentukan, termasuk salinan dari objek aslinya. Jumlahnya harus minimal 1 di setiap arah.
Number of elements
Jumlah elemen
X
X
Y
Y
Z
Z
Distance between the elements in the X direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.
Jarak antar elemen dalam arah X. Biasanya, hanya nilai X yang diperlukan; dua nilai lainnya dapat memberikan pergeseran tambahan ke arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan dengan arah negatif.
X intervals
Interval
Reset the distances.
Atur ulang jarak.
Reset X
Setel ulang
Distance between the elements in the Y direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.
Jarak antar elemen dalam arah X. Biasanya, hanya nilai X yang diperlukan; dua nilai lainnya dapat memberikan pergeseran tambahan ke arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan dengan arah negatif.
Y intervals
Interval
Reset Y
Setel ulang
Distance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.
Jarak antar elemen dalam arah X. Biasanya, hanya nilai X yang diperlukan; dua nilai lainnya dapat memberikan pergeseran tambahan ke arah masing-masing. Nilai negatif akan menghasilkan salinan yang dihasilkan dengan arah negatif.
Z intervals
Interval
Reset Z
Setel ulang
If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.
Jika dicentang, objek yang dihasilkan dalam larik akan menyatu jika saling bersentuhan.
Ini hanya berfungsi jika "Array tautan" tidak aktif.
Fuse
Sekering
If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.
Jika dicentang, objek yang dihasilkan akan berupa "Array tautan", bukan larik biasa. Larik Tautan lebih efisien saat membuat banyak salinan, tetapi tidak dapat digabungkan bersama.
Link array
Susunan tautan
DraftPolarArrayTaskPanel
Polar array
Polar array
Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.
Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.
Polar angle
Sudut polar
Number of elements in the array, including a copy of the original object.
It must be at least 2.
Number of elements in the array, including a copy of the original object.
It must be at least 2.
Number of elements
Jumlah elemen
The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.
Koordinat titik yang dilalui sumbu rotasi.
Ubah arah sumbu itu sendiri di editor properti.
Center of rotation
Pusat rotasi
X
X
Y
Y
Z
Z
Reset the coordinates of the center of rotation.
Setel ulang koordinat pusat rotasi.
Reset point
Titik reset
If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.
Jika dicentang, objek yang dihasilkan dalam larik akan menyatu jika saling bersentuhan.
Ini hanya berfungsi jika "Array tautan" tidak aktif.
Fuse
Sekering
If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.
Jika dicentang, objek yang dihasilkan akan berupa "Array tautan", bukan larik biasa. Larik Tautan lebih efisien saat membuat banyak salinan, tetapi tidak dapat digabungkan bersama.
Link array
Susunan tautan
DraftShapeStringGui
ShapeString
ShapeString
X
X
Enter coordinates or select point with mouse.
Enter coordinates or select point with mouse.
Y
Y
Z
Z
Reset 3d point selection
Setel ulang pemilihan titik 3d
Reset Point
Reset Point
String
Tali
Text to be made into ShapeString
Text to be made into ShapeString
Height
Tinggi
Height of the result
Height of the result
Font file
Berkas font
Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB)
Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB)
Form
Working plane setup
Working plane setup
Select 3 vertices, one or more shapes or a WP Proxy. Then confirm by clicking in the 3D view.
Or choose one of the options below.
Select 3 vertices, one or more shapes or a WP Proxy. Then confirm by clicking in the 3D view.
Or choose one of the options below.
Sets the working plane to the XY plane (ground plane)
Sets the working plane to the XY plane (ground plane)
Top (XY)
Atas (XY)
Sets the working plane to the XZ plane (front plane)
Sets the working plane to the XZ plane (front plane)
Front (XZ)
Depan (XZ)
Sets the working plane to the YZ plane (side plane)
Sets the working plane to the YZ plane (side plane)
Side (YZ)
Samping (YZ)
Sets the working plane facing the current view
Sets the working plane facing the current view
Align to view
Align to view
The working plane will align to the current
view each time a command is started
The working plane will align to the current
view each time a command is started
Automatic
Otomatis
Offset
Mengimbangi
An optional offset to give to the working plane
above its base position. Use this together with one
of the buttons above
An optional offset to give to the working plane
above its base position. Use this together with one
of the buttons above
If this is selected, the working plane will be
centered on the current view when pressing one
of the buttons above
If this is selected, the working plane will be
centered on the current view when pressing one
of the buttons above
Center plane on view
Pusat pesawat di lihat
Or select a single vertex to move the current working plane without changing its orientation. Then press the button below.
Or select a single vertex to move the current working plane without changing its orientation. Then press the button below.
Grid color
Grid color
Resets the working plane to its next position
Resets the working plane to its next position
Next
Next
Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view
Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view
Move working plane
Move working plane
The spacing between the smaller grid lines
The spacing between the smaller grid lines
Grid spacing
Jarak kisi
The number of squares between each main line of the grid
The number of squares between each main line of the grid
Main line every
Jalur utama setiap
Grid extension
Grid extension
lines
garis
The distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawing
The distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawing
Snapping radius
Snapping radius
Centers the view on the current working plane
Centers the view on the current working plane
Center view
Tampilan pusat
Resets the working plane to its previous position
Resets the working plane to its previous position
Previous
Sebelumnya
Style settings
Pengaturan Model
Load preset
Muat prasetel
Line color
Line warna
Line width
Tebal garis
px
piksel
Draw style
Menggambar gaya
Solid
Padat
Dashed
Strip
Dotted
Titik-titik
DashDot
DashDot
Display mode
Mode tampilan
Flat Lines
Garis datar
Wireframe
Bingkai kawat
Shaded
Berbayang
Fill the values below from a stored style preset
Fill the values below from a stored style preset
Save the current style as a preset...
Save the current style as a preset...
Shapes
Bentuk
Point color
Point color
Point size
Point size
Points
Poin
Shape color
Shape color
Transparency
Transparansi
Annotations
anotasi
Text spacing
Jarak teks
Text color
Warna teks
Line spacing
Jarak antarbaris
Dimensions
Ukuran
Dot
Dot
Circle
Lingkaran
Arrow
Panah
Tick
Centang
Tick-2
Centang-2
If checked, a unit symbol is added to dimension texts
If checked, a unit symbol is added to dimension texts
The unit override for dimensions. Leave blank to use the current FreeCAD unit.
The unit override for dimensions. Leave blank to use the current FreeCAD unit.
Ext lines
Ext lines
The distance the dimension line is extended past the extension lines
The distance the dimension line is extended past the extension lines
The color for texts, dimension texts and label texts
The color for texts, dimension texts and label texts
Font name
Nama font
The font for texts, dimensions and labels
The font for texts, dimensions and labels
Font size
Ukuran fonta
The height for texts, dimension texts and label texts
The height for texts, dimension texts and label texts
The line spacing for multi-line texts and labels (relative to the font size)
Penjarakan baris untuk teks dan label multi-baris (relatif terhadap ukuran fonta)
Scale multiplier
Pengganda skala
The annotation scale multiplier is the inverse of the scale set in the
Annotation scale widget. If the scale is 1:100 the multiplier is 100.
The annotation scale multiplier is the inverse of the scale set in the
Annotation scale widget. If the scale is 1:100 the multiplier is 100.
Line and arrow color
Warna garis dan penanda
Arrow type
Jenis Panah
Arrow size
Panah ukuran
The length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.
The length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.
The length of extension lines above the dimension line
The length of extension lines above the dimension line
The space between the dimension line and the dimension text
Ruang antara garis dimensi dan teks dimensi
Apply the above style to selected object(s)
Apply the above style to selected object(s)
Apply the above style to all annotations (texts, dimensions and labels)
Apply the above style to all annotations (texts, dimensions and labels)
Show unit
Tampilkan satuan
Dim overshoot
Dim overshoot
Ext overshoot
Ext overshoot
Unit override
Penggantian unit
Selected
Terpilih
Hatch
Hatch
PAT file:
Berkas PAT:
Pattern files (*.pat *.PAT)
Pattern files (*.pat *.PAT)
Pattern:
Pola:
Scale:
Skala:
Rotation:
Rotasi:
Gui::Dialog::DlgSettingsDraft
Default working plane
Pesawat kerja standar
General
Umum
The number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.
The number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.
The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.
The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.
XY (Top)
XY (Atas)
XZ (Front)
XZ (Depan)
YZ (Side)
YZ (sisi)
If checked, a widget indicating the current working
plane orientation appears when picking points
If checked, a widget indicating the current working
plane orientation appears when picking points
Show working plane tracker
Show working plane tracker
If checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.
If checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.
Include groups in layer list
Include groups in layer list
Command options
Command options
If checked, instructions are displayed in the Report view when using Draft commands
If checked, instructions are displayed in the Report view when using Draft commands
Show prompts in the Report view
Show prompts in the Report view
If checked, Length input, instead of the X coordinate, will have the initial focus.
This allows to indicate a direction and then type a distance.
If checked, Length input, instead of the X coordinate, will have the initial focus.
This allows to indicate a direction and then type a distance.
If checked, base objects, instead of created copies, are selected after copying
If checked, base objects, instead of created copies, are selected after copying
If checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.
If checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.
Create Part primitives if possible
Create Part primitives if possible
If checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.
If checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.
Keep face colors during downgrade/upgrade
Keep face colors during downgrade/upgrade
If checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.
If checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.
Keep face names during downgrade/upgrade
Keep face names during downgrade/upgrade
This is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.
This is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.
Max. number of editable objects
Max. number of editable objects
Edit node pick radius
Edit node pick radius
The pick radius of edit nodes
The pick radius of edit nodes
Label prefix for clones
Label prefix for clones
The default prefix added to the label of new clones
The default prefix added to the label of new clones
Construction group label
Construction group label
The default label for the construction geometry group
The default label for the construction geometry group
The default color for Draft objects in construction mode
The default color for Draft objects in construction mode
Internal precision level
Tingkat presisi internal
Set focus on Length instead of X coordinate
Set focus on Length instead of X coordinate
Select base objects after copying
Pilih objek dasar setelah disalin
Construction
Konstruksi
Construction geometry color
Konstruksi geometri warna
Draft classic style
Rancangan gaya klasik
Bitsnpieces style
Gaya Bitsnpieces
Visual
Visual
SVG patterns
SVG patterns
SVG pattern size
SVG pattern size
The default size for SVG patterns. A higher value results in a denser pattern.
The default size for SVG patterns. A higher value results in a denser pattern.
Additional SVG pattern location
Additional SVG pattern location
An optional directory with custom SVG files containing
pattern definitions to be added to the standard patterns
An optional directory with custom SVG files containing
pattern definitions to be added to the standard patterns
Drawing view line definitions
Menggambar definisi garis tampilan
Dashed line definition
Definisi garis putus-putus
An SVG linestyle definition
Definisi SVG linestyle
Dashdot line definition
Dashdot baris definisi
Dotted line definition
Definisi garis putus-putus
Texts and dimensions
Teks dan dimensi
Internal font
Font internal
Font size
Ukuran huruf
mm
mm
Number of decimals
Jumlah desimal
Extension line overshoot
Extension line overshoot
Dimension line overshoot
Dimension line overshoot
Texts
Texts
Font name or family
Font name or family
The default font for texts, dimensions and labels. It can be a font name such
as "Arial", a style such as "sans", "serif" or "mono", or a family such as
"Arial,Helvetica,sans", or a name with a style such as "Arial:Bold".
The default font for texts, dimensions and labels. It can be a font name such
as "Arial", a style such as "sans", "serif" or "mono", or a family such as
"Arial,Helvetica,sans", or a name with a style such as "Arial:Bold".
The default height for texts, dimension texts and label texts
The default height for texts, dimension texts and label texts
Line spacing factor
Line spacing factor
The default line spacing for multi-line texts and labels (relative to the font size)
The default line spacing for multi-line texts and labels (relative to the font size)
Scale multiplier
Pengganda skala
The default annotation scale multiplier. This is the inverse of the scale set
in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.
The default annotation scale multiplier. This is the inverse of the scale set
in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.
Text color
Warna teks
The default color for texts, dimension texts and label texts
The default color for texts, dimension texts and label texts
Lines and arrows
Garis dan Panah
If checked, the dimension line is displayed by default
If checked, the dimension line is displayed by default
Show dimension line
Show dimension line
Line width
Lebar garis
The default line width
The default line width
px
px
Arrow type
Jenis Panah
The default symbol displayed at the ends of dimension lines
The default symbol displayed at the ends of dimension lines
Dot
Dot
Circle
Lingkaran
Arrow
Panah
Tick
Centang
Tick-2
Centang-2
Arrow size
Panah ukuran
The default arrow size
The default arrow size
Line and arrow color
Warna garis dan penanda
The default color for lines and arrows
The default color for lines and arrows
Units
Unit
If checked, a unit symbol is added to dimension texts by default
If checked, a unit symbol is added to dimension texts by default
Show unit
Tampilkan satuan
Unit override
Penggantian unit
The default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.
The default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.
The default number of decimal places for dimension texts
The default number of decimal places for dimension texts
The optional string inserted between the feet and inches values in dimensions
The optional string inserted between the feet and inches values in dimensions
Dimension details
Rindican dimensi
The default distance the dimension line is extended past the extension lines
The default distance the dimension line is extended past the extension lines
Extension line length
Extension line length
The default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.
The default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.
The default length of extension lines above the dimension line
The default length of extension lines above the dimension line
The default space between the dimension line and the dimension text
The default space between the dimension line and the dimension text
ShapeStrings
ShapeStrings
Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB)
Font files (*.ttf *.otf *.pfb *.TTF *.OTF *.PFB)
Text spacing
Jarak teks
Feet separator
Feet separator
Default ShapeString font file
Default file font ShapeString
Select a font file
Pilih file font
SVG
SVG
Import style
Gaya impor
Method chosen for importing SVG object color to FreeCAD
Method chosen for importing SVG object color to FreeCAD
None (fastest)
Tidak ada (tercepat)
Use default color and linewidth
Gunakan warna default dan linewidth
Original color and linewidth
Warna asli dan linewidth
If checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter.
If checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter.
Disable units scaling
Nonaktifkan unit penskalaan
Export style
Gaya ekspor
Style of SVG file to write when exporting a sketch
Style of SVG file to write when exporting a sketch
Translated (for print & display)
Diterjemahkan (untuk cetak & layar)
Raw (for CAM)
Mentah (untuk CAM)
All white lines will appear in black in the SVG for better readability against white backgrounds
All white lines will appear in black in the SVG for better readability against white backgrounds
Translate white line color to black
Terjemahkan warna garis putih ke hitam
Max segment length for discretized arcs
Max segmen panjang untuk busur discretized
Versions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.
Versions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.
OCA
OCA
Check this if you want the areas (3D faces) to be imported too.
Periksa ini jika Anda ingin area ( wajah 3D) diimpor juga.
Import OCA areas
Impor daerah OCA
DXF
DXF
This preferences dialog will be shown when importing/ exporting DXF files
This preferences dialog will be shown when importing/ exporting DXF files
Show this dialog when importing and exporting
Tunjukkan dialog ini saat mengimpor dan mengekspor
Python importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yet
Python importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yet
Use legacy python importer
Gunakan importir python lawas
Python exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yet
Python exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yet
Use legacy python exporter
Use legacy python exporter
Automatic update (legacy importer only)
Pembaruan otomatis (hanya untuk importir lawas)
Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.
Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.
Allow FreeCAD to automatically download and update the DXF libraries
Biarkan FreeCAD mendownload dan memperbarui perpustakaan DXF secara otomatis
Import options
Pilihan impor
Note: Not all the options below are used by the new importer yet
Catatan: Tidak semua pilihan di bawah ini digunakan oleh importir baru
Import
Impor
If unchecked, texts and mtexts won't be imported
If unchecked, texts and mtexts won't be imported
texts and dimensions
teks dan dimensi
If unchecked, points won't be imported
If unchecked, points won't be imported
points
poin
If checked, paper space objects will be imported too
If checked, paper space objects will be imported too
layouts
tata letak
If you want the non-named blocks (beginning with a *) to be imported too
If you want the non-named blocks (beginning with a *) to be imported too
*blocks
* blok
Create
Membuat
Only standard Part objects will be created (fastest)
Only standard Part objects will be created (fastest)
simple Part shapes
bentuk bagian sederhana
Parametric Draft objects will be created whenever possible
Parametric Draft objects will be created whenever possible
Draft objects
Draf objek
Sketches will be created whenever possible
Sketches will be created whenever possible
Sketches
Sketsa
Scale factor to apply to imported files
Faktor skala untuk diterapkan ke file yang diimpor
Scale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8
Scale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8
Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable.
Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable.
Import hatch boundaries as wires (legacy importer only)
Import hatch boundaries as wires (legacy importer only)
Render polylines with width (legacy importer only)
Render polylines with width (legacy importer only)
Export 3D objects as polyface meshes (legacy exporter only)
Export 3D objects as polyface meshes (legacy exporter only)
Project exported objects along current view direction (legacy exporter only)
Project exported objects along current view direction (legacy exporter only)
FreeCAD will try to join coincident objects into wires.
Note that this can take a while!
FreeCAD will try to join coincident objects into wires.
Note that this can take a while!
Colors will set as specified in the DXF file whenever possible.
Otherwise default colors will be applied.
Colors will set as specified in the DXF file whenever possible.
Otherwise default colors will be applied.
Use colors from the DXF file
Use colors from the DXF file
Join geometry
Bergabunglah dengan geometri
Group layers into blocks
Lapisi kelompok menjadi blok
Imported texts will get the standard Draft Text size,
instead of the size they have in the DXF document
Imported texts will get the standard Draft Text size,
instead of the size they have in the DXF document
Use standard font size for texts
Gunakan ukuran font standar untuk teks
If this is checked, DXF layers will be imported as Draft Layers
If this is checked, DXF layers will be imported as Draft Layers
Use Layers
Use Layers
Hatches will be converted into simple wires
Hatches will be converted into simple wires
If polylines have a width defined, they will be rendered
as closed wires with correct width
If polylines have a width defined, they will be rendered
as closed wires with correct width
Ellipse export is poorly supported. Use this to export them as polylines instead.
Ellipse export is poorly supported. Use this to export them as polylines instead.
Treat ellipses and splines as polylines
Perlakukan elips dan splines sebagai polylines
Max Spline Segment:
Max Spline Segment:
Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.
Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.
Export options
Pilihan ekspor
All objects containing faces will be exported as 3D polyfaces
All objects containing faces will be exported as 3D polyfaces
TechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.
TechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.
Export TechDraw Views as blocks
Export TechDraw Views as blocks
Exported objects will be projected to reflect the current view direction
Exported objects will be projected to reflect the current view direction
Grid and snapping
Kisi dan gertakan
Shift
Bergeser
Always snap
Always snap
Snap modifier
Snap modifier
The Snap modifier key
The Snap modifier key
Ctrl
Ctrl
Alt
Alt
Constrain modifier
Constrain modifier
The Constrain modifier key
The Constrain modifier key
Alt modifier
Alt modifier
The Alt modifier key. The function of this key depends on the command.
The Alt modifier key. The function of this key depends on the command.
If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.
If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.
The distance between grid lines
The distance between grid lines
The maximum number of objects Draft Edit is allowed to process at the same time
The maximum number of objects Draft Edit is allowed to process at the same time
Only show the Draft snap toolbar during commands
Only show the Draft snap toolbar during commands
Grid
Kisi
Always show the grid
Selalu tampilkan gridnya
If checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.
If checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.
Show the grid during commands
Show the grid during commands
If checked, an additional border is displayed around the grid,
showing the main square size in the bottom left corner
If checked, an additional border is displayed around the grid,
showing the main square size in the bottom left corner
Show grid border
Show grid border
If checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if the BIM workbench is installed and
"Show grid border" is enabled.
If checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if the BIM workbench is installed and
"Show grid border" is enabled.
Show human figure
Show human figure
If checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate system
If checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate system
Use colored axes
Gunakan sumbu berwarna
Main lines every
Jalur utama setiap
The number of squares between main grid lines.
These lines are thicker than normal grid lines.
The number of squares between main grid lines.
These lines are thicker than normal grid lines.
Grid spacing
Jarak kisi
Grid size
Ukuran grid
The number of horizontal and vertical lines in the grid
The number of horizontal and vertical lines in the grid
lines
garis
Grid transparency
Grid transparency
%
%
Grid color
Grid color
Snapping and modifier keys
Snapping and modifier keys
Snap symbol style
Snap symbol style
Mouse delay
Mouse delay
seconds
detik
The style for snap symbols
The style for snap symbols
Snap symbol color
Snap symbol color
The color for snap symbols
The color for snap symbols
If checked, snapping is activated without the need to press the Snap modifier key
If checked, snapping is activated without the need to press the Snap modifier key
The color of the grid
Warna dari kisi
The overall transparency of the grid
Transparansi keseluruhan kisi
DWG
DWG
DWG conversion
Konversi DWG
Conversion method:
Metode konversi:
This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.
This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.
Automatic
Otomatis
LibreDWG
LibreDWG
ODA Converter
Konverter ODA
QCAD pro
QCAD pro
Path to file converter
Path to file converter
The path to your DWG file converter executable
The path to your DWG file converter executable
<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html>
<html> <head> <body> <p> <span style = "font-weight: 600;"> Catatan: </ span> Pilihan DXF berlaku untuk file DWG juga. </ p> </ body> </ html>
Relative
Relative
R
R
Continue
Lanjutkan
Close
Dekat
O
O
Copy
Salinan
Fill
Fill
L
L
Interface
Interface
In-command shortcuts
In-command shortcuts
F
F
Select edge
Select edge
Subelement mode
Subelement mode
B
B
C
C
Exit
Keluar
A
A
Increase radius
Increase radius
Decrease radius
Decrease radius
UI options
UI options
If checked, the Draft snap toolbar will only be visible during commands
If checked, the Draft snap toolbar will only be visible during commands
If checked, the Snap widget is displayed in the Draft statusbar
If checked, the Snap widget is displayed in the Draft statusbar
Show the Snap widget in the Draft Workbench
Show the Snap widget in the Draft Workbench
If checked, the Annotation scale widget is displayed in the Draft statusbar
If checked, the Annotation scale widget is displayed in the Draft statusbar
Show the Annotation scale widget in the Draft Workbench
Show the Annotation scale widget in the Draft Workbench
E
E
Q
Q
Length
Panjangnya
Wipe
Wipe
W
W
U
U
Global
Global
G
G
Undo
Urung
N
N
Cycle snap
Cycle snap
Add hold
Add hold
Set working plane
Tetapkan bidang kerja
Snap
Snap
S
S
Restrict X
Restrict X
X
X
Restrict Y
Restrict Y
Y
Y
Restrict Z
Restrict Z
Z
Z
draft
Relative
Relative
Global
Global
Continue
Lanjutkan
Close
Dekat
Copy
Salinan
Subelement mode
Subelement mode
Fill
Fill
Exit
Keluar
Snap On/Off
Snap On/Off
Increase snap radius
Increase snap radius
Decrease snap radius
Decrease snap radius
Restrict X
Restrict X
Restrict Y
Restrict Y
Restrict Z
Restrict Z
Select edge
Select edge
Add custom snap point
Add custom snap point
Length mode
Length mode
Wipe
Wipe
Set Working Plane
Tetapkan Pesawat Kerja
Cycle snap object
Cycle snap object
Undo last segment
Undo last segment
Top
Puncak
Front
Depan
Side
Samping
Auto
Mobil
Current working plane:
Current working plane:
Selected shapes do not define a plane
Selected shapes do not define a plane
No previous working plane
No previous working plane
No next working plane
No next working plane
Axes:
Axes:
Position:
Posisi:
None
Tidak ada
active command:
active command:
Active Draft command
Active Draft command
X coordinate of next point
X coordinate of next point
X
X
Y
Y
Z
Z
Y coordinate of next point
Y coordinate of next point
Z coordinate of next point
Z coordinate of next point
Enter point
Enter point
Enter a new point with the given coordinates
Enter a new point with the given coordinates
Length
Panjangnya
Angle
Sudut
Length of current segment
Length of current segment
Angle of current segment
Angle of current segment
Check this to lock the current angle
Check this to lock the current angle
Radius
Jari-jari
Radius of Circle
Radius of Circle
Coordinates relative to last point or to coordinate system origin
if is the first point to set
Coordinates relative to last point or to coordinate system origin
if is the first point to set
Coordinates relative to global coordinate system.
Uncheck to use working plane coordinate system
Coordinates relative to global coordinate system.
Uncheck to use working plane coordinate system
Filled
Filled
Check this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabled
Check this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabled
Finish
Selesai
Finishes the current drawing or editing operation
Finishes the current drawing or editing operation
If checked, command will not finish until you press the command button again
If checked, command will not finish until you press the command button again
If checked, an OCC-style offset will be performed instead of the classic offset
If checked, an OCC-style offset will be performed instead of the classic offset
OCC-style offset
OCC-style offset
Undo
Urung
If checked, objects will be copied instead of moved
If checked, objects will be copied instead of moved
Undo the last segment
Undo the last segment
Finishes and closes the current line
Finishes and closes the current line
Wipes the existing segments of this line and starts again from the last point
Wipes the existing segments of this line and starts again from the last point
Set WP
Set WP
Reorients the working plane on the last segment
Reorients the working plane on the last segment
Selects an existing edge to be measured by this dimension
Selects an existing edge to be measured by this dimension
Sides
Sides
Number of sides
Number of sides
Modify subelements
Modify subelements
If checked, subelements will be modified instead of entire objects
If checked, subelements will be modified instead of entire objects
Create text
Create text
Press this button to create the text object, or finish your text with two blank lines
Press this button to create the text object, or finish your text with two blank lines
Change default style for new objects
Change default style for new objects
Toggle construction mode
Toggle construction mode
Autogroup off
Autogroup off
Line
Garis
DWire
DWire
Circle
Lingkaran
Arc
Busur
Rotate
Putar
Point
Titik
Label
Label
Label type
Label type
Offset
Mengimbangi
Distance
Jarak
Offset distance
Offset distance
Trimex
Trimex
Local {}
Local {}
Global {}
Global {}
Autogroup:
Autogroup:
Modify objects
Modify objects
Faces
Wajah
Remove
Menghapus
Add
Menambahkan
Facebinder elements
Facebinder elements
Draft
Konsep
Converting:
Mengkonversi:
Conversion successful
Conversion successful
LibreDWG converter not found
LibreDWG converter not found
ODA converter not found
ODA converter not found
QCAD converter not found
QCAD converter not found
No suitable external DWG converter has been found.
Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG
For more information see:
https://wiki.freecad.org/Import_Export_Preferences
No suitable external DWG converter has been found.
Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG
For more information see:
https://wiki.freecad.org/Import_Export_Preferences
Error during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.
Error during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.
All Shapes must be coplanar
All Shapes must be coplanar
Selected Shapes must define a plane
Selected Shapes must define a plane
The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either enable FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.
The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either enable FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.
Custom
Adat
Unable to convert input into a scale factor
Unable to convert input into a scale factor
Set custom scale
Set custom scale
Set custom annotation scale in format x:x, x=x
Set custom annotation scale in format x:x, x=x
Set the scale used by draft annotation tools
Set the scale used by draft annotation tools
No active document. Aborting.
No active document. Aborting.
Wrong input: object {} not in document.
Salah masukan: obyek {} tidak ada dalam dokumen
Unable to insert new object into a scaled part
Unable to insert new object into a scaled part
Symbol not implemented. Using a default symbol.
Symbol not implemented. Using a default symbol.
image is Null
image is Null
filename does not exist on the system or in the resource file
filename does not exist on the system or in the resource file
unable to load texture
unable to load texture
Does not have 'ViewObject.RootNode'.
Does not have 'ViewObject.RootNode'.
Solids:
Solids:
Faces:
Wajah:
Wires:
Wires:
Edges:
Tepi:
Vertices:
Vertices:
Face
Menghadapi
Wire
Kawat
different types
different types
Objects have different placements. Distance between the two base points:
Objects have different placements. Distance between the two base points:
This function will be deprecated in {}. Please use '{}'.
This function will be deprecated in {}. Please use '{}'.
This function will be deprecated. Please use '{}'.
This function will be deprecated. Please use '{}'.
has a different value
has a different value
doesn't exist in one of the objects
doesn't exist in one of the objects
%s shares a base with %d other objects. Please check if you want to modify this.
%s shares a base with %d other objects. Please check if you want to modify this.
%s cannot be modified because its placement is readonly.
%s cannot be modified because its placement is readonly.
Wrong input: unknown document {}
Salah masukan: dokumen {} tidak dikenal
Please select exactly two objects, the base object and the path object, before calling this command.
Please select exactly two objects, the base object and the path object, before calling this command.
Path array
Path array
Pick target point
Pick target point
Create Label
Create Label
Pick endpoint of leader line
Pick endpoint of leader line
Pick text position
Pick text position
Pick first point
Pick first point
Create Line
Buat Garis
Create Wire
Create Wire
Polyline
Polyline
Pick next point
Pick next point
Unable to create a Wire from selected objects
Unable to create a Wire from selected objects
Convert to Wire
Convert to Wire
Select an object to join
Select an object to join
Join lines
Join lines
Selection:
Pilihan:
Pick location point
Pick location point
Create Text
Buat Teks
Select an object to convert.
Select an object to convert.
Convert to Sketch
Konversikan ke Sketsa
Convert to Draft
Convert to Draft
Convert Draft/Sketch
Convert Draft/Sketch
Select an object to move
Select an object to move
Pick start point
Pick start point
Pick end point
Pick end point
Move
Pindah
Some subelements could not be moved.
Some subelements could not be moved.
Pick center point
Pick center point
Pick radius
Pick radius
Start angle
Start angle
Pick start angle
Pick start angle
Aperture angle
Aperture angle
Pick aperture
Pick aperture
Create Circle (Part)
Create Circle (Part)
Create Circle
Buat Lingkaran
Create Arc (Part)
Create Arc (Part)
Create Arc
Buat Busur
Pick aperture angle
Pick aperture angle
Arc by 3 points
Arc by 3 points
Create Arc by 3 points
Buat busur dengan tiga titik
Toggle grid
Toggle grid
Select an object to edit
Select an object to edit
Select a Draft object to edit
Select a Draft object to edit
Edit node
Edit node
No edit point found for selected object
No edit point found for selected object
Too many objects selected, max number set to:
Too many objects selected, max number set to:
: this object is not editable
: this object is not editable
Annotation style editor
Annotation style editor
Create new style
Create new style
Style name:
Style name:
Style name required
Style name required
No style name specified
No style name specified
Style exists
Style exists
This style name already exists
This style name already exists
Style in use
Style in use
This style is used by some objects in this document. Are you sure?
This style is used by some objects in this document. Are you sure?
Rename style
Rename style
New name:
New name:
Open styles file
Open styles file
JSON files (*.json *.JSON)
JSON files (*.json *.JSON)
JSON file (*.json)
Berkas JSON (*.json)
Save styles file
Save styles file
Select an object to project
Select an object to project
Create Point
Create Point
Select an object to rotate
Select an object to rotate
Pick rotation center
Pick rotation center
Base angle
Base angle
The base angle you wish to start the rotation from
The base angle you wish to start the rotation from
Pick base angle
Pick base angle
Rotation
Perputaran
The amount of rotation you wish to perform.
The final angle will be the base angle plus this amount.
The amount of rotation you wish to perform.
The final angle will be the base angle plus this amount.
Pick rotation angle
Pick rotation angle
Add to group
Tambahkan ke grup
Ungroup
Pisahkan Kelompok
Add new group
Tambah grup baru
Select group
Pilih grup
No new selection. You must select non-empty groups or objects inside groups.
No new selection. You must select non-empty groups or objects inside groups.
Autogroup
Grup otomatis
Add new Layer
Tambahkan layer baru
Add to construction group
Add to construction group
Add a new group with a given name
Add a new group with a given name
Add group
Tambah grup
Group name
Nama grup
Group
Kelompok
Flip dimension
Balik dimensi
Sketch is too complex to edit: it is suggested to use sketcher default editor
Sketch is too complex to edit: it is suggested to use sketcher default editor
Fillet radius
Fillet radius
Radius of fillet
Radius of fillet
Enter radius.
Enter radius.
Fillet cannot be created
Fillet cannot be created
Create fillet
Buat fillet
Polygon
Poligon
Create Polygon (Part)
Create Polygon (Part)
Create Polygon
Create Polygon
Click anywhere on a line to split it.
Click anywhere on a line to split it.
Split line
Split line
Select objects to trim or extend
Select objects to trim or extend
Pick distance
Pick distance
Offset angle
Offset angle
Unable to trim these objects, only Draft wires and arcs are supported.
Unable to trim these objects, only Draft wires and arcs are supported.
Unable to trim these objects, too many wires
Unable to trim these objects, too many wires
These objects don't intersect.
These objects don't intersect.
Too many intersection points.
Too many intersection points.
B-Spline
B-Spline
Spline has been closed
Spline has been closed
Last point has been removed
Last point has been removed
Create B-spline
Buat B-spline
Change Style
Ubah Gaya
This object does not support possible coincident points, please try again.
This object does not support possible coincident points, please try again.
Delete point
Delete point
Add point
Add point
Open wire
Open wire
Close wire
Tutup kawat
Reverse wire
Reverse wire
Active object must have more than two points/nodes
Active object must have more than two points/nodes
Open spline
Open spline
Close spline
Close spline
Reverse spline
Reverse spline
Move arc
Move arc
Set first angle
Set first angle
Set last angle
Set last angle
Set radius
Set radius
Invert arc
Invert arc
Make sharp
Make sharp
Make tangent
Make tangent
Make symmetric
Make symmetric
Reverse curve
Reverse curve
Open curve
Open curve
Close curve
Close curve
Selection is not a Knot
Selection is not a Knot
Endpoint of BezCurve can't be smoothed
Endpoint of BezCurve can't be smoothed
Bézier curve
Bézier curve
Bézier curve has been closed
Bézier curve has been closed
Create BezCurve
Create BezCurve
Cubic Bézier curve
Cubic Bézier curve
Click and drag to define next knot
Click and drag to define next knot
Ellipse
Elips
Create Ellipse
Create Ellipse
Pick opposite point
Pick opposite point
Select faces from existing objects
Select faces from existing objects
Select an object to scale
Select an object to scale
Pick base point
Pick base point
Pick reference distance from base point
Pick reference distance from base point
Scale
Skala
Some subelements could not be scaled.
Some subelements could not be scaled.
Unable to scale object:
Unable to scale object:
Unable to scale objects:
Unable to scale objects:
This object type cannot be scaled directly. Please use the clone method.
This object type cannot be scaled directly. Please use the clone method.
Pick new distance from base point
Pick new distance from base point
Layer
Layer
Please select exactly two objects, the base object and the point object, before calling this command.
Please select exactly two objects, the base object and the point object, before calling this command.
Point array
Point array
No active Draft Toolbar.
No active Draft Toolbar.
Construction mode
Construction mode
Toggle display mode
Toggle display mode
Dimension
Dimensi
Create Dimension
Create Dimension
Create Dimension (radial)
Create Dimension (radial)
Edge too short!
Edge too short!
Edges don't intersect!
Edges don't intersect!
Select an object to stretch
Select an object to stretch
Pick first point of selection rectangle
Pick first point of selection rectangle
Pick opposite point of selection rectangle
Pick opposite point of selection rectangle
Pick start point of displacement
Pick start point of displacement
Pick end point of displacement
Pick end point of displacement
Turning one Rectangle into a Wire
Turning one Rectangle into a Wire
Stretch
Stretch
Rectangle
Empat persegi panjang
Create Plane
Create Plane
Create Rectangle
Create Rectangle
Select an object to mirror
Select an object to mirror
Pick start point of mirror line
Pick start point of mirror line
Mirror
Mirror
Pick end point of mirror line
Pick end point of mirror line
Path twisted array
Path twisted array
Select an object to clone
Select an object to clone
Cannot clone object(s) without a Shape, aborting
Tidak bisa mengklon obyek (obyek) tanpa Bentuk, aksi dibatalkan
Cannot clone object(s) without a Shape, skipping them
Tidak bisa mengklon obyek (obyek), aksi dilewati
Change slope
Change slope
Select an object to upgrade
Select an object to upgrade
Upgrade
Upgrade
Select an object to offset
Select an object to offset
Offset only works on one object at a time.
Offset only works on one object at a time.
Cannot offset this object type
Cannot offset this object type
Offset of Bezier curves is currently not supported
Offset of Bezier curves is currently not supported
Create 2D view
Create 2D view
Pick ShapeString location point
Pick ShapeString location point
Create ShapeString
Create ShapeString
Heal
Heal
Downgrade
Downgrade
Task panel:
Task panel:
Polar array
Polar array
At least one element must be selected.
At least one element must be selected.
Selection is not suitable for array.
Selection is not suitable for array.
Object:
Object:
Number of elements must be at least 2.
Number of elements must be at least 2.
The angle is above 360 degrees. It is set to this value to proceed.
The angle is above 360 degrees. It is set to this value to proceed.
The angle is below -360 degrees. It is set to this value to proceed.
The angle is below -360 degrees. It is set to this value to proceed.
Fuse:
Fuse:
Create Link array:
Create Link array:
Number of elements:
Number of elements:
Polar angle:
Polar angle:
Center of rotation:
Center of rotation:
Orthogonal array
Orthogonal array
Number of elements must be at least 1.
Number of elements must be at least 1.
Number of X elements:
Number of X elements:
Interval X:
Interval X:
Number of Y elements:
Number of Y elements:
Interval Y:
Interval Y:
Number of Z elements:
Number of Z elements:
Interval Z:
Interval Z:
ShapeString
ShapeString
Default
Bawaan
Circular array
Array Melingkar
Number of layers must be at least 2.
Number of layers must be at least 2.
Radial distance is zero. Resulting array may not look correct.
Radial distance is zero. Resulting array may not look correct.
Radial distance is negative. It is made positive to proceed.
Radial distance is negative. It is made positive to proceed.
Tangential distance cannot be zero.
Tangential distance cannot be zero.
Tangential distance is negative. It is made positive to proceed.
Tangential distance is negative. It is made positive to proceed.
Radial distance:
Radial distance:
Tangential distance:
Tangential distance:
Number of circular layers:
Number of circular layers:
Symmetry parameter:
Symmetry parameter:
added 'Fuse', 'Justification', 'JustificationReference', 'KeepLeftMargin', 'ObliqueAngle' and 'ScaleToSize' properties
added 'Fuse', 'Justification', 'JustificationReference', 'KeepLeftMargin', 'ObliqueAngle' and 'ScaleToSize' properties
changed 'Tracking' property type
changed 'Tracking' property type
ShapeString: oblique angle must be in the -80 to +80 degree range
ShapeString: oblique angle must be in the -80 to +80 degree range
ShapeString: string has no wires
ShapeString: string has no wires
ShapeString: face creation failed for one character
ShapeString: face creation failed for one character
added view property 'ScaleMultiplier'
added view property 'ScaleMultiplier'
added view property 'AnnotationStyle'
added view property 'AnnotationStyle'
, path object doesn't have 'Edges'.
, path object doesn't have 'Edges'.
migrated 'PathObj' property to 'PathObject'
migrated 'PathObj' property to 'PathObject'
migrated 'PathSubs' property to 'PathSubelements'
migrated 'PathSubs' property to 'PathSubelements'
migrated 'Xlate' property to 'ExtraTranslation'
migrated 'Xlate' property to 'ExtraTranslation'
added 'Fuse' property
added 'Fuse' property
Start Offset too large for path length. Using zero instead.
Start Offset too large for path length. Using zero instead.
End Offset too large for path length minus Start Offset. Using zero instead.
End Offset too large for path length minus Start Offset. Using zero instead.
Length of tangent vector is zero. Copy not aligned.
Length of tangent vector is zero. Copy not aligned.
Length of normal vector is zero. Using a default axis instead.
Length of normal vector is zero. Using a default axis instead.
Tangent and normal vectors are parallel. Normal replaced by a default axis.
Tangent and normal vectors are parallel. Normal replaced by a default axis.
Cannot calculate normal vector. Using the default normal instead.
Cannot calculate normal vector. Using the default normal instead.
AlignMode {} is not implemented
AlignMode {} is not implemented
No shape found
No shape found
All Shapes must be planar
All Shapes must be planar
Two objects are needed.
Two objects are needed.
One object is not valid.
One object is not valid.
Radius is too large
Radius is too large
Points:
Points:
Wrong input: must be list or tuple of three points exactly.
Wrong input: must be list or tuple of three points exactly.
Placement:
Placement:
Wrong input: incorrect type of placement.
Wrong input: incorrect type of placement.
Wrong input: incorrect type of points.
Wrong input: incorrect type of points.
Cannot generate shape:
Cannot generate shape:
Wrong input: base_object not in document.
Wrong input: base_object not in document.
Wrong input: path_object not in document.
Wrong input: path_object not in document.
Wrong input: must be a number.
Wrong input: must be a number.
Wrong input: must be a vector.
Wrong input: must be a vector.
Wrong input: must be a list or tuple of strings, or a single string.
Wrong input: must be a list or tuple of strings, or a single string.
Wrong input: must be 'Original', 'Frenet', or 'Tangent'.
Wrong input: must be 'Original', 'Frenet', or 'Tangent'.
Wrong input: must be a number or vector.
Wrong input: must be a number or vector.
Input: single value expanded to vector.
Input: single value expanded to vector.
Wrong input: must be an integer number.
Wrong input: must be an integer number.
Input: number of elements must be at least 1. It is set to 1.
Input: number of elements must be at least 1. It is set to 1.
Wrong input: must be a placement, a vector, or a rotation.
Wrong input: must be a placement, a vector, or a rotation.
Wrong input: target_object must not be a list.
Wrong input: target_object must not be a list.
Wrong input: target_object not in document.
Wrong input: target_object not in document.
Wrong input: subelements must be a list or tuple of strings, or a single string.
Wrong input: subelements must be a list or tuple of strings, or a single string.
Wrong input: subelement {} not in object.
Wrong input: subelement {} not in object.
Wrong input: label_type must be a string.
Wrong input: label_type must be a string.
Wrong input: label_type must be one of the following:
Wrong input: label_type must be one of the following:
Wrong input: must be a list of strings or a single string.
Wrong input: must be a list of strings or a single string.
Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.
Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.
Wrong input: points {} must be a list of at least two vectors.
Wrong input: points {} must be a list of at least two vectors.
Direction is not 'Custom'; points won't be used.
Direction is not 'Custom'; points won't be used.
Wrong input: must be a list of two elements. For example, [object, 'Edge1'].
Wrong input: must be a list of two elements. For example, [object, 'Edge1'].
Wrong input: point_object not in document.
Wrong input: point_object not in document.
Wrong input: object has the wrong type.
Wrong input: object has the wrong type.
This function is deprecated. Do not use this function directly.
This function is deprecated. Do not use this function directly.
Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.
Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.
Wrong input: edge_object must not be a list or tuple.
Wrong input: edge_object must not be a list or tuple.
Wrong input: edge_object not in document.
Wrong input: edge_object not in document.
Wrong input: object doesn't have a 'Shape' to measure.
Wrong input: object doesn't have a 'Shape' to measure.
Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.
Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.
Wrong input: must be an integer.
Wrong input: must be an integer.
i1: values below 1 are not allowed; will be set to 1.
i1: values below 1 are not allowed; will be set to 1.
Wrong input: vertex not in object.
Wrong input: vertex not in object.
i2: values below 1 are not allowed; will be set to the last vertex in the object.
i2: values below 1 are not allowed; will be set to the last vertex in the object.
Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.
Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.
index: values below 1 are not allowed; will be set to 1.
index: values below 1 are not allowed; will be set to 1.
Wrong input: index doesn't correspond to an edge in the object.
Wrong input: index doesn't correspond to an edge in the object.
Wrong input: index doesn't correspond to a circular edge.
Wrong input: index doesn't correspond to a circular edge.
Wrong input: must be a string, 'radius' or 'diameter'.
Wrong input: must be a string, 'radius' or 'diameter'.
Wrong input: must be a list with two angles.
Wrong input: must be a list with two angles.
Wrong input: must be a number or quantity.
Wrong input: must be a number or quantity.
Layers
Layers
Wrong input: it must be a string.
Wrong input: it must be a string.
Wrong input: must be a tuple of three floats 0.0 to 1.0.
Wrong input: must be a tuple of three floats 0.0 to 1.0.
Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.
Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.
Wrong input: must be a number between 0 and 100.
Wrong input: must be a number between 0 and 100.
Activate this layer
Activate this layer
Select layer contents
Select layer contents
Merge layer duplicates
Merge layer duplicates
Add new layer
Add new layer
Edit
Edit
Flatten
Flatten
Upgrade: Unknown force method:
Upgrade: Unknown force method:
Found 1 block: exploding it
Found 1 block: exploding it
Found 1 multi-solids compound: exploding it
Found 1 multi-solids compound: exploding it
Found 1 parametric object: breaking its dependencies
Found 1 parametric object: breaking its dependencies
Found 2 objects: subtracting them
Found 2 objects: subtracting them
Found several faces: splitting them
Found several faces: splitting them
Found several objects: subtracting them from the first one
Found several objects: subtracting them from the first one
Found 1 face: extracting its wires
Found 1 face: extracting its wires
Found only wires: extracting their edges
Found only wires: extracting their edges
No more downgrade possible
No more downgrade possible
No object given
No object given
The two points are coincident
The two points are coincident
mirrored
mirrored
Object must be a closed shape
Object must be a closed shape
No solid object created
No solid object created
Faces must be coplanar to be refined
Faces must be coplanar to be refined
Found groups: closing each open object inside
Found groups: closing each open object inside
Found meshes: turning into Part shapes
Found meshes: turning into Part shapes
Found 1 solidifiable object: solidifying it
Found 1 solidifiable object: solidifying it
Found 2 objects: fusing them
Found 2 objects: fusing them
Found object with several coplanar faces: refine them
Found object with several coplanar faces: refine them
Found 1 non-parametric objects: draftifying it
Found 1 non-parametric objects: draftifying it
Found 1 closed sketch object: creating a face from it
Found 1 closed sketch object: creating a face from it
Found closed wires: creating faces
Found closed wires: creating faces
Found several wires or edges: wiring them
Found several wires or edges: wiring them
Found several non-treatable objects: creating compound
Found several non-treatable objects: creating compound
trying: closing it
trying: closing it
Found 1 open wire: closing it
Found 1 open wire: closing it
Found 1 object: draftifying it
Found 1 object: draftifying it
Found points: creating compound
Found points: creating compound
Unable to upgrade these objects.
Unable to upgrade these objects.
Text
Teks
added view property 'TextColor'
added view property 'TextColor'
renamed 'DisplayMode' options to 'World/Screen'
renamed 'DisplayMode' options to 'World/Screen'
renamed view property 'TextFont' to 'FontName'
renamed view property 'TextFont' to 'FontName'
renamed view property 'TextSize' to 'FontSize'
renamed view property 'TextSize' to 'FontSize'
No Target
No Target
Invalid label type
Invalid label type
Tag not available for object
Tag not available for object
Material not available for object
Material not available for object
Position not available for (sub)object
Position not available for (sub)object
Length not available for (sub)object
Length not available for (sub)object
Area not available for (sub)object
Area not available for (sub)object
Volume not available for (sub)object
Volume not available for (sub)object
added missing view properties
added missing view properties
added property 'Count'
added property 'Count'
Opening multiple hyperlinks
Opening multiple hyperlinks
Multiple hyperlinks found.
Multiple hyperlinks found.
This may lead to the opening of various windows
This may lead to the opening of various windows
File not found:
File not found:
Opening hyperlink
Opening hyperlink
Select 3 vertices, one or more shapes or an object to define a working plane
Select 3 vertices, one or more shapes or an object to define a working plane
Do you want to update the SVG pattern options
of existing objects in all opened documents?
Do you want to update the SVG pattern options
of existing objects in all opened documents?
added 'ExtraPlacement' property
added 'ExtraPlacement' property
migrated 'PointList' property to 'PointObject'
migrated 'PointList' property to 'PointObject'
Workbench
Draft creation tools
Draft creation tools
Draft annotation tools
Draft annotation tools
Draft modification tools
Draft modification tools
Draft utility tools
Draft utility tools
Draft snap
Draft snap
&Drafting
&Drafting
&Annotation
&Annotation
&Modification
&Modification
&Utilities
&Utilities
Arc tools
Arc tools
Bézier tools
Bézier tools
Array tools
Array tools
Draft
Download of dxf libraries failed.
Please install the dxf Library addon manually
from menu Tools -> Addon Manager
Download of dxf libraries failed.
Please install the dxf Library addon manually
from menu Tools -> Addon Manager
You must choose a base object before using this command
You must choose a base object before using this command
Fillet
Fillet
Delete original objects
Delete original objects
Create chamfer
Create chamfer
Save style
Save style
Name of this new style:
Name of this new style:
Warning
Warning
Name exists. Overwrite?
Name exists. Overwrite?
Error: json module not found. Unable to load style
Error: json module not found. Unable to load style
Error: json module not found. Unable to save style
Error: json module not found. Unable to save style
Clone
Klon
Slope
Slope
Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction
Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction
True
Benar
False
Salah
Scale
Skala
X factor
X factor
Y factor
Y factor
Z factor
Z factor
Uniform scaling
Uniform scaling
Working plane orientation
Working plane orientation
Copy
Salinan
Modify subelements
Modify subelements
Pick from/to points
Pick from/to points
Create a clone
Buat tiruan
Point object doesn't have a discrete point, it cannot be used for an array.
Point object doesn't have a discrete point, it cannot be used for an array.
_BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.
_BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.
Writing camera position
Writing camera position
Writing objects shown/hidden state
Writing objects shown/hidden state
On
On
Name
Nama
Line width
Lebar garis
Draw style
Menggambar gaya
Line color
Line warna
Face color
Face color
Transparency
Transparansi
Line print color
Line print color
New Layer
New Layer
Custom
Adat
Label
Label
Position
Position
Length
Panjangnya
Area
Daerah
Volume
Volume
Tag
Tag
Material
Bahan
Label + Position
Label + Position
Label + Length
Label + Length
Label + Area
Label + Area
Label + Volume
Label + Volume
Label + Material
Label + Material
importOCA
OCA: found no data to export
OCA: found no data to export
successfully exported
successfully exported
ImportAirfoilDAT
Did not find enough coordinates
Did not find enough coordinates
ImportSVG
Unknown SVG export style, switching to Translated
Unknown SVG export style, switching to Translated
The export list contains no object with a valid bounding box
The export list contains no object with a valid bounding box
Draft_SelectPlane
Select plane
Pilih pesawat
Select 3 vertices, one or more shapes or an object to define a working plane.
Select 3 vertices, one or more shapes or an object to define a working plane.
Draft_PathArray
Path array
Path array
Creates copies of the selected object along a selected path.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.
Creates copies of the selected object along a selected path.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.
Draft_PathLinkArray
Path link array
Path link array
Like the PathArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
Like the PathArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
Draft_Label
Label
Label
Creates a label, optionally attached to a selected object or subelement.
First select a vertex, an edge, or a face of an object, then call this command,
and then set the position of the leader line and the textual label.
The label will be able to display information about this object, and about the selected subelement,
if any.
If many objects or many subelements are selected, only the first one in each case
will be used to provide information to the label.
Creates a label, optionally attached to a selected object or subelement.
First select a vertex, an edge, or a face of an object, then call this command,
and then set the position of the leader line and the textual label.
The label will be able to display information about this object, and about the selected subelement,
if any.
If many objects or many subelements are selected, only the first one in each case
will be used to provide information to the label.
Draft_Line
Line
Garis
Creates a 2-point line. CTRL to snap, SHIFT to constrain.
Creates a 2-point line. CTRL to snap, SHIFT to constrain.
Draft_Wire
Polyline
Polyline
Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.
Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.
Draft_Hatch
Hatch
Hatch
Creates hatches on the faces of a selected object
Creates hatches on the faces of a selected object
Draft_Join
Join
Join
Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.
Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.
Draft_Text
Text
Teks
Creates a multi-line annotation. CTRL to snap.
Creates a multi-line annotation. CTRL to snap.
Draft_Draft2Sketch
Draft to sketch
Draft to sketch
Convert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.
Convert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.
Draft_Snap_Lock
Snap lock
Snap lock
Enables or disables snapping globally.
Enables or disables snapping globally.
Draft_Snap_Midpoint
Snap midpoint
Snap midpoint
Snaps to the midpoint of edges.
Snaps to the midpoint of edges.
Draft_Snap_Perpendicular
Snap perpendicular
Snap perpendicular
Snaps to the perpendicular points on faces and edges.
Snaps to the perpendicular points on faces and edges.
Draft_Snap_Grid
Snap grid
Snap grid
Snaps to the intersections of grid lines.
Snaps to the intersections of grid lines.
Draft_Snap_Intersection
Snap intersection
Snap intersection
Snaps to the intersection of two edges.
Snaps to the intersection of two edges.
Draft_Snap_Parallel
Snap parallel
Snap parallel
Snaps to an imaginary line parallel to straight edges.
Snaps to an imaginary line parallel to straight edges.
Draft_Snap_Endpoint
Snap endpoint
Snap endpoint
Snaps to the endpoints of edges.
Snaps to the endpoints of edges.
Draft_Snap_Angle
Snap angle
Snap angle
Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
Draft_Snap_Center
Snap center
Snap center
Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts.
Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts.
Draft_Snap_Extension
Snap extension
Snap extension
Snaps to an imaginary line that extends beyond the endpoints of straight edges.
Snaps to an imaginary line that extends beyond the endpoints of straight edges.
Draft_Snap_Near
Snap near
Snap near
Snaps to the nearest point on faces and edges.
Snaps to the nearest point on faces and edges.
Draft_Snap_Ortho
Snap ortho
Snap ortho
Snaps to imaginary lines that cross the previous point at multiples of 45°.
Snaps to imaginary lines that cross the previous point at multiples of 45°.
Draft_Snap_Special
Snap special
Snap special
Snaps to special points defined by the object.
Snaps to special points defined by the object.
Draft_Snap_Dimensions
Snap dimensions
Snap dimensions
Shows temporary X and Y dimensions.
Shows temporary X and Y dimensions.
Draft_Snap_WorkingPlane
Snap working plane
Snap working plane
Projects snap points onto the current working plane.
Projects snap points onto the current working plane.
Draft_ShowSnapBar
Show snap toolbar
Show snap toolbar
Shows the snap toolbar if it is hidden.
Shows the snap toolbar if it is hidden.
Draft_Move
Move
Pindah
Moves the selected objects from one base point to another point.
If the "copy" option is active, it will create displaced copies.
CTRL to snap, SHIFT to constrain.
Moves the selected objects from one base point to another point.
If the "copy" option is active, it will create displaced copies.
CTRL to snap, SHIFT to constrain.
Draft_Arc
Arc
Busur
Creates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.
Creates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.
Draft_Arc_3Points
Arc by 3 points
Arc by 3 points
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
Draft_ArcTools
Arc tools
Arc tools
Create various types of circular arcs.
Create various types of circular arcs.
Draft_ToggleGrid
Toggle grid
Toggle grid
Toggles the Draft grid on and off.
Toggles the Draft grid on and off.
Draft_SubelementHighlight
Subelement highlight
Subelement highlight
Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.
Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.
Draft_Edit
Edit
Edit
Edits the active object.
Press E or ALT+LeftClick to display context menu
on supported nodes and on supported objects.
Edits the active object.
Press E or ALT+LeftClick to display context menu
on supported nodes and on supported objects.
Draft_CircularArray
Circular array
Array Melingkar
Creates copies of the selected object, and places the copies in a radial pattern
creating various circular layers.
The array can be turned into an orthogonal or a polar array by changing its type.
Creates copies of the selected object, and places the copies in a radial pattern
creating various circular layers.
The array can be turned into an orthogonal or a polar array by changing its type.
Draft_AnnotationStyleEditor
Annotation styles...
Annotation styles...
Manage or create annotation styles
Manage or create annotation styles
Draft_Point
Point
Titik
Creates a point object. Click anywhere on the 3D view.
Creates a point object. Click anywhere on the 3D view.
Draft_Rotate
Rotate
Putar
Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
If the "copy" option is active, it will create rotated copies.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
If the "copy" option is active, it will create rotated copies.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
Draft_AddToGroup
Move to group...
Move to group...
Moves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.
Moves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.
Draft_SelectGroup
Select group
Pilih grup
Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected.
Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected.
Draft_AutoGroup
Autogroup
Grup otomatis
Select a group to add all Draft and Arch objects to.
Select a group to add all Draft and Arch objects to.
Draft_AddConstruction
Add to construction group
Add to construction group
Adds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.
Adds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.
Draft_AddNamedGroup
Add a new named group
Add a new named group
Add a new group with a given name.
Add a new group with a given name.
Draft_WorkingPlaneProxy
Create working plane proxy
Create working plane proxy
Creates a proxy object from the current working plane.
Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
Then you can use it to save a different camera position and objects' states any time you need.
Creates a proxy object from the current working plane.
Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
Then you can use it to save a different camera position and objects' states any time you need.
Draft_WireToBSpline
Wire to B-spline
Wire to B-spline
Converts a selected polyline to a B-spline, or a B-spline to a polyline.
Converts a selected polyline to a B-spline, or a B-spline to a polyline.
Draft_FlipDimension
Flip dimension
Balik dimensi
Flip the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.
Flip the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.
Draft_Fillet
Fillet
Fillet
Creates a fillet between two selected wires or edges.
Creates a fillet between two selected wires or edges.
Draft_SetStyle
Set style
Set style
Sets default styles
Sets default styles
Draft_Polygon
Polygon
Poligon
Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrain
Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrain
Draft_Split
Split
Split
Splits the selected line or polyline into two independent lines
or polylines by clicking anywhere along the original object.
It works best when choosing a point on a straight segment and not a corner vertex.
Splits the selected line or polyline into two independent lines
or polylines by clicking anywhere along the original object.
It works best when choosing a point on a straight segment and not a corner vertex.
Draft_Trimex
Trimex
Trimex
Trims or extends the selected object, or extrudes single faces.
CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.
Trims or extends the selected object, or extrudes single faces.
CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.
Draft_BSpline
B-spline
B-spline
Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.
Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.
Draft_ApplyStyle
Apply current style
Apply current style
Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups.
Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups.
Draft_BezCurve
Bézier curve
Bézier curve
Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
CTRL to snap, SHIFT to constrain.
Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
CTRL to snap, SHIFT to constrain.
Draft_CubicBezCurve
Cubic Bézier curve
Cubic Bézier curve
Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
After the curve is created you can go back to edit each control point and set the properties of each knot.
CTRL to snap, SHIFT to constrain.
Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
After the curve is created you can go back to edit each control point and set the properties of each knot.
CTRL to snap, SHIFT to constrain.
Draft_BezierTools
Bézier tools
Bézier tools
Create various types of Bézier curves.
Create various types of Bézier curves.
Draft_Circle
Circle
Lingkaran
Creates a circle (full circular arc).
CTRL to snap, ALT to select tangent objects.
Creates a circle (full circular arc).
CTRL to snap, ALT to select tangent objects.
Draft_Ellipse
Ellipse
Elips
Creates an ellipse. CTRL to snap.
Creates an ellipse. CTRL to snap.
Draft_Facebinder
Facebinder
Pengikat wajah
Creates a facebinder object from selected faces.
Creates a facebinder object from selected faces.
Draft_OrthoArray
Array
Array
Creates copies of the selected object, and places the copies in an orthogonal pattern,
meaning the copies follow the specified direction in the X, Y, Z axes.
The array can be turned into a polar or a circular array by changing its type.
Creates copies of the selected object, and places the copies in an orthogonal pattern,
meaning the copies follow the specified direction in the X, Y, Z axes.
The array can be turned into a polar or a circular array by changing its type.
Draft_Scale
Scale
Skala
Scales the selected objects from a base point.
CTRL to snap, SHIFT to constrain, ALT to copy.
Scales the selected objects from a base point.
CTRL to snap, SHIFT to constrain, ALT to copy.
Draft_Layer
Layer
Layer
Adds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.
Adds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.
Draft_PointArray
Point array
Point array
Creates copies of the selected base object at the points of a point object.
First select the base object, and then select the point object.
Creates copies of the selected base object at the points of a point object.
First select the base object, and then select the point object.
Draft_PointLinkArray
Point link array
Point link array
Like the PointArray tool, but creates a 'Point link array' instead.
A 'Point link array' is more efficient when handling many copies.
Like the PointArray tool, but creates a 'Point link array' instead.
A 'Point link array' is more efficient when handling many copies.
Draft_ArrayTools
Array tools
Array tools
Create various types of arrays, including rectangular, polar, circular, path, and point
Create various types of arrays, including rectangular, polar, circular, path, and point
Draft_ToggleConstructionMode
Toggle construction mode
Toggle construction mode
Toggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.
Toggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.
Draft_ToggleDisplayMode
Toggle normal/wireframe display
Toggle normal/wireframe display
Switches the display mode of selected objects from flatlines to wireframe and back.
This is helpful to quickly visualize objects that are hidden by other objects.
This is intended to be used with closed shapes and solids, and doesn't affect open wires.
Switches the display mode of selected objects from flatlines to wireframe and back.
This is helpful to quickly visualize objects that are hidden by other objects.
This is intended to be used with closed shapes and solids, and doesn't affect open wires.
Draft_Dimension
Dimension
Dimensi
Creates a dimension.
- Pick three points to create a simple linear dimension.
- Select a straight line to create a linear dimension linked to that line.
- Select an arc or circle to create a radius or diameter dimension linked to that arc.
- Select two straight lines to create an angular dimension between them.
CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
You may select a single line or single circular arc before launching this command
to create the corresponding linked dimension.
You may also select an 'App::MeasureDistance' object before launching this command
to turn it into a 'Draft Dimension' object.
Creates a dimension.
- Pick three points to create a simple linear dimension.
- Select a straight line to create a linear dimension linked to that line.
- Select an arc or circle to create a radius or diameter dimension linked to that arc.
- Select two straight lines to create an angular dimension between them.
CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
You may select a single line or single circular arc before launching this command
to create the corresponding linked dimension.
You may also select an 'App::MeasureDistance' object before launching this command
to turn it into a 'Draft Dimension' object.
Draft_Stretch
Stretch
Stretch
Stretches the selected objects.
Select an object, then draw a rectangle to pick the vertices that will be stretched,
then draw a line to specify the distance and direction of stretching.
Stretches the selected objects.
Select an object, then draw a rectangle to pick the vertices that will be stretched,
then draw a line to specify the distance and direction of stretching.
Draft_Rectangle
Rectangle
Empat persegi panjang
Creates a 2-point rectangle. CTRL to snap.
Creates a 2-point rectangle. CTRL to snap.
Draft_Mirror
Mirror
Mirror
Mirrors the selected objects along a line defined by two points.
Mirrors the selected objects along a line defined by two points.
Draft_PathTwistedArray
Path twisted array
Path twisted array
Creates copies of the selected object along a selected path, and twists the copies.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.
Creates copies of the selected object along a selected path, and twists the copies.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.
Draft_PathTwistedLinkArray
Path twisted link array
Path twisted link array
Like the PathTwistedArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
Like the PathTwistedArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
Draft_Clone
Clone
Klon
Creates a clone of the selected objects.
The resulting clone can be scaled in each of its three directions.
Creates a clone of the selected objects.
The resulting clone can be scaled in each of its three directions.
Draft_PolarArray
Polar array
Polar array
Creates copies of the selected object, and places the copies in a polar pattern
defined by a center of rotation and its angle.
The array can be turned into an orthogonal or a circular array by changing its type.
Creates copies of the selected object, and places the copies in a polar pattern
defined by a center of rotation and its angle.
The array can be turned into an orthogonal or a circular array by changing its type.
Draft_Slope
Set slope
Set slope
Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.
Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.
Draft_Upgrade
Upgrade
Upgrade
Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.
Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.
Draft_Offset
Offset
Mengimbangi
Offsets of the selected object.
It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
Offsets of the selected object.
It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
Draft_Shape2DView
Shape 2D view
Shape 2D view
Creates a 2D projection of the selected objects on the XY plane.
The initial projection direction is the negative of the current active view direction.
You can select individual faces to project, or the entire solid, and also include hidden lines.
These projections can be used to create technical drawings with the TechDraw Workbench.
Creates a 2D projection of the selected objects on the XY plane.
The initial projection direction is the negative of the current active view direction.
You can select individual faces to project, or the entire solid, and also include hidden lines.
These projections can be used to create technical drawings with the TechDraw Workbench.
Draft_ShapeString
Shape from text
Shape from text
Creates a shape from a text string by choosing a specific font and a placement.
The closed shapes can be used for extrusions and boolean operations.
Creates a shape from a text string by choosing a specific font and a placement.
The closed shapes can be used for extrusions and boolean operations.
Draft_Heal
Heal
Heal
Heal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.
Heal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.
Draft_Downgrade
Downgrade
Downgrade
Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.
Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.
App::Property
The placement of the base point of the first line
The placement of the base point of the first line
The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.
The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.
Text string
Text string
Font file name
Font file name
Height of text
Height of text
Horizontal and vertical alignment
Horizontal and vertical alignment
Height reference used for justification
Height reference used for justification
Keep left margin and leading white space when justification is left
Keep left margin and leading white space when justification is left
Scale to ensure cap height is equal to size
Scale to ensure cap height is equal to size
Inter-character spacing
Inter-character spacing
Oblique (slant) angle
Oblique (slant) angle
Fill letters with faces
Fill letters with faces
Fuse faces if faces overlap, usually not required (can be very slow)
Fuse faces if faces overlap, usually not required (can be very slow)
The base object used by this object
The base object used by this object
The PAT file used by this object
The PAT file used by this object
The pattern name used by this object
The pattern name used by this object
The pattern scale used by this object
The pattern scale used by this object
The pattern rotation used by this object
The pattern rotation used by this object
If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)
If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)
The objects included in this clone
The objects included in this clone
The scale factor of this clone
The scale factor of this clone
If Clones includes several objects,
set True for fusion or False for compound
If Clones includes several objects,
set True for fusion or False for compound
Start angle of the arc
Start angle of the arc
End angle of the arc (for a full circle,
give it same value as First Angle)
End angle of the arc (for a full circle,
give it same value as First Angle)
Radius of the circle
Radius of the circle
Create a face
Create a face
The area of this object
The area of this object
The objects that are part of this layer
The objects that are part of this layer
Number of faces
Number of faces
Radius of the control circle
Radius of the control circle
How the polygon must be drawn from the control circle
How the polygon must be drawn from the control circle
Radius to use to fillet the corners
Radius to use to fillet the corners
Size of the chamfer to give to the corners
Size of the chamfer to give to the corners
The base object that will be duplicated.
The base object that will be duplicated.
The object along which the copies will be distributed. It must contain 'Edges'.
The object along which the copies will be distributed. It must contain 'Edges'.
Number of copies to create.
Number of copies to create.
Rotation factor of the twisted array.
Rotation factor of the twisted array.
Show the individual array elements (only for Link arrays)
Show the individual array elements (only for Link arrays)
The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.
The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.
Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.
Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.
The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.
The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.
The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.
The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.
The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.
The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.
The placement of the 'Text' element in 3D space
The placement of the 'Text' element in 3D space
The text to display when 'Label Type' is set to 'Custom'
The text to display when 'Label Type' is set to 'Custom'
The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.
The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.
The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.
The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.
General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.
General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.
Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.
Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.
The base object that will be duplicated
The base object that will be duplicated
List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.
List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.
Number of copies to create
Number of copies to create
Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.
Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.
Alignment vector for 'Tangent' mode
Alignment vector for 'Tangent' mode
Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode
Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode
Direction of the local Z axis when 'Force Vertical' is true
Direction of the local Z axis when 'Force Vertical' is true
Method to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.
Method to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.
Length from the start of the path to the first copy.
Length from the start of the path to the first copy.
Length from the end of the path to the last copy.
Length from the end of the path to the last copy.
Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.
Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.
The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.
The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.
Specifies if the copies should be fused together if they touch each other (slower)
Specifies if the copies should be fused together if they touch each other (slower)
Number of copies in X direction
Number of copies in X direction
Number of copies in Y direction
Number of copies in Y direction
Number of copies in Z direction
Number of copies in Z direction
Distance and orientation of intervals in X direction
Distance and orientation of intervals in X direction
Distance and orientation of intervals in Y direction
Distance and orientation of intervals in Y direction
Distance and orientation of intervals in Z direction
Distance and orientation of intervals in Z direction
The axis direction around which the elements in a polar or a circular array will be created
The axis direction around which the elements in a polar or a circular array will be created
Center point for polar and circular arrays.
The 'Axis' passes through this point.
Center point for polar and circular arrays.
The 'Axis' passes through this point.
The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.
The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.
Number of copies in the polar direction
Number of copies in the polar direction
Distance and orientation of intervals in 'Axis' direction
Distance and orientation of intervals in 'Axis' direction
Angle to cover with copies
Angle to cover with copies
Distance between circular layers
Distance between circular layers
Distance between copies in the same circular layer
Distance between copies in the same circular layer
Number of circular layers. The 'Base' object counts as one layer.
Number of circular layers. The 'Base' object counts as one layer.
A parameter that determines how many symmetry planes the circular array will have.
A parameter that determines how many symmetry planes the circular array will have.
Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.
Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.
Base object that will be duplicated
Base object that will be duplicated
Object containing points used to distribute the copies.
Object containing points used to distribute the copies.
Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.
Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.
Additional placement, shift and rotation, that will be applied to each copy
Additional placement, shift and rotation, that will be applied to each copy
The base object this 2D view must represent
The base object this 2D view must represent
The projection vector of this object
The projection vector of this object
The way the viewed object must be projected
The way the viewed object must be projected
The indices of the faces to be projected in Individual Faces mode
The indices of the faces to be projected in Individual Faces mode
Show hidden lines
Tampilkan garis tersembunyi
Fuse wall and structure objects of same type and material
Fuse wall and structure objects of same type and material
Tessellate Ellipses and B-splines into line segments
Tessellate Ellipses and B-splines into line segments
For Cutlines and Cutfaces modes,
this leaves the faces at the cut location
For Cutlines and Cutfaces modes,
this leaves the faces at the cut location
Length of line segments if tessellating Ellipses or B-splines
into line segments
Length of line segments if tessellating Ellipses or B-splines
into line segments
If this is True, this object will include only visible objects
If this is True, this object will include only visible objects
A list of exclusion points. Any edge touching any of those points will not be drawn.
A list of exclusion points. Any edge touching any of those points will not be drawn.
A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.
A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.
If this is True, only solid geometry is handled. This overrides the base object's Only Solids property
If this is True, only solid geometry is handled. This overrides the base object's Only Solids property
If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property
If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property
This object will be recomputed only if this is True.
This object will be recomputed only if this is True.
The points of the Bezier curve
The points of the Bezier curve
The degree of the Bezier function
The degree of the Bezier function
Continuity
Lanjutkan
If the Bezier curve should be closed or not
If the Bezier curve should be closed or not
Create a face if this curve is closed
Create a face if this curve is closed
The length of this object
The length of this object
The placement of this object
The placement of this object
X Location
X Location
Y Location
Y Location
Z Location
Z Location
Start angle of the elliptical arc
Start angle of the elliptical arc
End angle of the elliptical arc
(for a full circle, give it same value as First Angle)
End angle of the elliptical arc
(for a full circle, give it same value as First Angle)
Minor radius of the ellipse
Minor radius of the ellipse
Major radius of the ellipse
Major radius of the ellipse
Area of this object
Area of this object
The start point of this line.
The start point of this line.
The end point of this line.
The end point of this line.
The length of this line.
The length of this line.
Radius to use to fillet the corner.
Radius to use to fillet the corner.
The normal direction of the text of the dimension
The normal direction of the text of the dimension
The object measured by this dimension object
The object measured by this dimension object
The object, and specific subelements of it,
that this dimension object is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.
The object, and specific subelements of it,
that this dimension object is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.
A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.
A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.
Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.
Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.
Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.
Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.
The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.
The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.
The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.
The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.
When measuring circular arcs, it determines whether to display
the radius or the diameter value
When measuring circular arcs, it determines whether to display
the radius or the diameter value
Starting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.
Starting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.
Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.
Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.
The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.
The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.
The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.
The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.
Length of the rectangle
Length of the rectangle
Height of the rectangle
Height of the rectangle
Horizontal subdivisions of this rectangle
Horizontal subdivisions of this rectangle
Vertical subdivisions of this rectangle
Vertical subdivisions of this rectangle
Linked faces
Linked faces
Specifies if splitter lines must be removed
Specifies if splitter lines must be removed
An optional extrusion value to be applied to all faces
An optional extrusion value to be applied to all faces
An optional offset value to be applied to all faces
An optional offset value to be applied to all faces
This specifies if the shapes sew
This specifies if the shapes sew
The area of the faces of this Facebinder
The area of the faces of this Facebinder
The components of this block
The components of this block
The vertices of the wire
The vertices of the wire
If the wire is closed or not
If the wire is closed or not
The base object is the wire, it's formed from 2 objects
The base object is the wire, it's formed from 2 objects
The tool object is the wire, it's formed from 2 objects
The tool object is the wire, it's formed from 2 objects
The start point of this line
The start point of this line
The end point of this line
The end point of this line
The length of this line
The length of this line
Create a face if this object is closed
Create a face if this object is closed
The number of subdivisions of each edge
The number of subdivisions of each edge
The points of the B-spline
The points of the B-spline
If the B-spline is closed or not
If the B-spline is closed or not
Create a face if this spline is closed
Create a face if this spline is closed
Parameterization factor
Parameterization factor
Force sync pattern placements even when array elements are expanded
Force sync pattern placements even when array elements are expanded
Show the individual array elements
Show the individual array elements
Text color
Warna teks
Line spacing (relative to font size)
Line spacing (relative to font size)
Vertical alignment
Vertical alignment
Maximum number of characters on each line of the text box
Maximum number of characters on each line of the text box
Horizontal alignment
Horizontal alignment
The type of frame around the text of this object
The type of frame around the text of this object
Display a leader line or not
Display a leader line or not
Line width
Lebar garis
Line color
Line warna
Defines an SVG pattern.
Defines an SVG pattern.
Defines the size of the SVG pattern.
Defines the size of the SVG pattern.
If it is true, the objects contained within this layer will adopt the line color of the layer
If it is true, the objects contained within this layer will adopt the line color of the layer
If it is true, the objects contained within this layer will adopt the shape color of the layer
If it is true, the objects contained within this layer will adopt the shape color of the layer
If it is true, the print color will be used when objects in this layer are placed on a TechDraw page
If it is true, the print color will be used when objects in this layer are placed on a TechDraw page
The line color of the objects contained within this layer
The line color of the objects contained within this layer
The shape color of the objects contained within this layer
The shape color of the objects contained within this layer
The line width of the objects contained within this layer
The line width of the objects contained within this layer
The draw style of the objects contained within this layer
The draw style of the objects contained within this layer
The transparency of the objects contained within this layer
The transparency of the objects contained within this layer
The line color of the objects contained within this layer, when used on a TechDraw page
The line color of the objects contained within this layer, when used on a TechDraw page
Font name
Nama font
Font size
Ukuran huruf
Spacing between text and dimension line
Spacing between text and dimension line
Rotate the dimension text 180 degrees
Rotate the dimension text 180 degrees
Text Position.
Leave '(0,0,0)' for automatic position
Text Position.
Leave '(0,0,0)' for automatic position
Text override.
Write '$dim' so that it is replaced by the dimension length.
Text override.
Write '$dim' so that it is replaced by the dimension length.
The number of decimals to show
The number of decimals to show
Show the unit suffix
Show the unit suffix
A unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notation
A unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notation
Arrow size
Panah ukuran
Arrow type
Jenis Panah
Rotate the dimension arrows 180 degrees
Rotate the dimension arrows 180 degrees
The distance the dimension line is extended
past the extension lines
The distance the dimension line is extended
past the extension lines
Length of the extension lines
Length of the extension lines
Length of the extension line
beyond the dimension line
Length of the extension line
beyond the dimension line
Shows the dimension line and arrows
Shows the dimension line and arrows
Command
Transform
Transform
Draft_LayerManager
Manage layers...
Manage layers...
Set/modify the different layers of this document
Set/modify the different layers of this document
QObject
Draft
Konsep
Import-Export
Ekspor Impor
Draft_Hyperlink
Open hyperlinks
Open hyperlinks
Open linked documents
Open linked documents