Dialog Annotation Styles Editor Eagarthóir Stíleanna Anótála Renames the selected style Athainmníonn an stíl roghnaithe Rename Athainmnigh Deletes the selected style Scriosann sé an stíl roghnaithe New Nua Delete Scrios Layers Manager Bainisteoir Sraitheanna Select All Roghnaigh Uile Toggle Visibility Infheictheacht a Athrú Isolate Leithlisigh Cancel Cealaigh OK Ceart go leor Import styles from json file Iompórtáil stíleanna ó chomhad json Export styles to json file Easpórtáil stíleanna chuig comhad json The font to use for texts and dimensions An cló le húsáid le haghaidh téacsanna agus toisí Font name Ainm cló The font size in system units Méid an chló in aonaid chórais The width of the lines Leithead na línte px px The color of lines and arrows Dath na línte agus na saigheada Line and arrow color Dath líne agus saigheada The distance the dimension line is additionally extended An fad a shíntear an líne thoise freisin Dimension line overshoot Ró-lámhach líne toise Extension line length Fad líne síneadh The distance the extension lines are additionally extended beyond the dimension line An fad a shíntear na línte síneadh thar an líne thoise freisin Font size Méid an chló The line spacing for multi-line texts and labels (relative to the font size) An spásáil líne le haghaidh téacsanna agus lipéid il-líne (i gcoibhneas le méid an chló) The color of texts, dimension texts and label texts Dath téacsanna, téacsanna toise agus téacsanna lipéid Text color Dath an téacs Units Aonaid A multiplier factor that affects the size of texts and markers Fachtóir iolraitheora a théann i bhfeidhm ar mhéid téacsanna agus marcóirí Style Name Ainm Stíl The name of the style. Existing style names can be edited. Ainm an stíl. Is féidir ainmneacha stíleanna atá ann cheana a chur in eagar. Add new… Cuir nua leis… Scale multiplier Iolraitheoir scála The type of the starting arrows or markers to use for dimensions and labels Cineál na saigheada nó na marcóirí tosaigh le húsáid le haghaidh toisí agus lipéid Start arrow type Cineál saighead tosaigh None Dada The size of the starting arrows or markers in system units Méid na saigheada nó na marcóirí tosaigh in aonaid chórais Start arrow size Méid saighead tosaigh The type of the ending arrows or markers to use for dimensions and labels Cineál na saigheada nó na marcóirí deiridh le húsáid le haghaidh toisí agus lipéid End arrow type Cineál saighead deiridh The size of the ending arrows or markers in system units Méid na saigheada nó na marcóirí deiridh in aonaid chórais End arrow size Méid saighead deiridh If it is checked it will show the unit next to the dimension value Má tá tic ann taispeánfar an t-aonad in aice le luach na toise Show unit Taispeáin an t-aonad Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit Sonraigh aonad faid bailí ar nós mm, m, orlach, troigh, chun luach na toise a thaispeáint san aonad seo a fhorchur Unit override Sárú aonaid The number of decimals to show for dimension values Líon na ndeicheamhán le taispeáint le haghaidh luachanna toise Dimension Details Sonraí Toise The distance between the dimension text and the dimension line An fad idir an téacs toise agus an líne toise Text spacing Spásáil téacs Annotations Anótálacha Texts Téacsanna Line spacing factor Fachtóir spásála líne Lines and Arrows Línte agus Saigheada Displays the dimension line Taispeánann an líne toise Show dimension line Taispeáin líne toise Line width Leithead líne Dot Ponc Circle Ciorcal Arrow Saighead Tick Tic Tick-2 Tic-2 Shows the unit next to the dimension value Taispeánann sé an t-aonad in aice leis an luach toise Number of decimals Líon na ndeachúlacha Extension line overshoot Ró-shíneadh líne síneadh The length of the extension lines Fad na línte síneadh DraftCircularArrayTaskPanel Circular Array Eagar Ciorclach Distance from one layer of objects to the next layer of objects An fad ó shraith amháin réad go dtí an chéad shraith eile réad Radial distance Fad gathach Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. Fad ó eilimint amháin i bhfáinne amháin den eagar go dtí an chéad eilimint eile sa fáinne céanna. Ní féidir leis a bheith nialasach. Tangential distance Fad tadhlaíoch The number of symmetry lines in the circular array Líon na línte siméadrachta san eagar ciorclach Center of Rotation Lár an Rothlaithe Resets the coordinates of the center of rotation Athshocraíonn sé comhordanáidí lár an rothlaithe Reset Point Athshocraigh Pointe Symmetry Siméadracht Number of concentric circles to create, including a copy of the original object. It must be at least 2. Líon na gciorcal comhlárnach le cruthú, lena n-áirítear cóip den réad bunaidh. Ní mór dó a bheith 2 ar a laghad. Number of concentric circles Líon na gciorcal comhlárnach The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Comhordanáidí an phointe trína dtéann an ais rothlaithe. Athraigh treo na haise féin san eagarthóir airíonna. X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Má tá sé seo seiceáilte, comhleáfar na rudaí a eascraíonn as san eagar má dhéanann siad teagmháil lena chéile. Ní oibríonn sé seo ach amháin má tá "Nasc eagar" múchta. Fuse Fiús If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Má tá sé seiceáilte, beidh an réad a eascraíonn as sin ina "Eagar Nasc" seachas eagar rialta. Tá eagar Nasc níos éifeachtaí nuair a bhíonn cóipeanna iolracha á gcruthú, ach ní féidir é a chumasc le chéile. Link array Eagar nasc DraftOrthoArrayTaskPanel Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. Líon na n-eilimintí san eagar sa treo sonraithe, lena n-áirítear cóip den réad bunaidh. Ní mór don uimhir a bheith 1 ar a laghad i ngach treo. X X Y Y Z Z Reset X Athshocraigh X Reset Y Athshocraigh Y Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Fad idir na heilimintí sa treo Z. De ghnáth, ní bhíonn ach an luach Z riachtanach; is féidir leis an dá luach eile aistriú breise a thabhairt ina dtreonna faoi seach. Mar thoradh ar luachanna diúltacha, déanfar cóipeanna a tháirgeadh sa treo diúltach. Orthogonal Array Eagar Ortagónach Toggles between orthogonal and linear mode Athraíonn idir mód ortagónach agus líneach Switch to Linear Mode Athraigh go Mód Líneach X axis Ais X Y axis Ais Y Z axis Ais Z Number of Elements Líon na nEilimintí Currently selected axis Ais atá roghnaithe faoi láthair Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Fad idir na heilimintí sa treo X. De ghnáth, ní bhíonn ach an luach X riachtanach; is féidir leis an dá luach eile aistriú breise a thabhairt ina dtreonna faoi seach. Mar thoradh ar luachanna diúltacha, déanfar cóipeanna a tháirgeadh sa treo diúltach. X Intervals Eatraimh X Resets the distances Athshocraíonn sé na faid Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Fad idir na heilimintí sa treo Y. De ghnáth, ní bhíonn ach an luach Y riachtanach; is féidir leis an dá luach eile aistriú breise a thabhairt ina dtreonna faoi seach. Mar thoradh ar luachanna diúltacha, déanfar cóipeanna a tháirgeadh sa treo diúltach. Y Intervals Eatraimh Y Z Intervals Eatraimh Z Reset Z Athshocraigh Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Má tá sé seo seiceáilte, comhleáfar na rudaí a eascraíonn as san eagar má dhéanann siad teagmháil lena chéile. Ní oibríonn sé seo ach amháin má tá "Nasc eagar" múchta. Fuse Fiús If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Má tá sé seiceáilte, beidh an réad a eascraíonn as sin ina "Eagar Nasc" seachas eagar rialta. Tá eagar Nasc níos éifeachtaí nuair a bhíonn cóipeanna iolracha á gcruthú, ach ní féidir é a chumasc le chéile. Link array Eagar nasc DraftPolarArrayTaskPanel Polar Array Eagar Polar Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. Uillinn scuabtha an dáilte polach. Cruthaíonn uillinn dhiúltach patrún polach sa treo eile. Is é 360 céim an luach absalóideach uasta. Polar angle Uillinn pholarach Number of elements in the array, including a copy of the original object. It must be at least 2. Líon na n-eilimintí san eagar, lena n-áirítear cóip den réad bunaidh. Caithfidh sé a bheith 2 ar a laghad. Number of elements Líon na n-eilimintí The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Comhordanáidí an phointe trína dtéann an ais rothlaithe. Athraigh treo na haise féin san eagarthóir airíonna. Center of Rotation Lár an Rothlaithe Resets the coordinates of the center of rotation Athshocraíonn sé comhordanáidí lár an rothlaithe Reset Point Athshocraigh Pointe X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Má tá sé seo seiceáilte, comhleáfar na rudaí a eascraíonn as san eagar má dhéanann siad teagmháil lena chéile. Ní oibríonn sé seo ach amháin má tá "Nasc eagar" múchta. Fuse Fiús If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Má tá sé seiceáilte, beidh an réad a eascraíonn as sin ina "Eagar Nasc" seachas eagar rialta. Tá eagar Nasc níos éifeachtaí nuair a bhíonn cóipeanna iolracha á gcruthú, ach ní féidir é a chumasc le chéile. Link array Eagar nasc DraftShapeStringGui ShapeString SreangánCruth X X Y Y Z Z Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Comhordanáidí i gcoibhneas leis an gcóras comhordanáidí domhanda. Díthiceáil chun córas comhordanáidí an eitleáin oibre a úsáid Global Domhanda Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Comhaid clónna (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Text to be made into ShapeString Téacs le déanamh ina ShapeString Enter coordinates or pick a point with the mouse Cuir isteach comhordanáidí nó roghnaigh pointe leis an luch Resets the picked point Athshocraíonn sé an pointe roghnaithe Reset Point Athshocraigh Pointe Height Airde Height of the result Airde an toraidh Text Téacs Font file Comhad cló Form Top (XY) Barr (XY) Front (XZ) Tosaigh (XZ) Side (YZ) Taobh (YZ) Sets the working plane facing the current view Socraíonn an plána oibre atá os comhair an radhairc reatha Working Plane Setup Socrú Plána Oibre Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. Roghnaigh rogha thíos. Nó sainmhínigh plána oibre trí 3 bhuaicphointe, 1 chruth nó níos mó, nó seachfhreastalaí plána oibre a roghnú, agus ansin deimhnigh le cliceáil san amharc 3T. Sets the working plane to the XY-plane (ground plane) Socraíonn sé an plána oibre go dtí an plána XY (plána talún) Sets the working plane to the XZ-plane (front plane) Socraíonn an plána oibre go dtí an plána XZ (an plána tosaigh) Sets the working plane to the YZ-plane (side plane) Socraíonn an plána oibre go dtí an plána YZ (plána taobh) Align to View Ailínigh leis an Amharc The working plane will align to the current view each time a command is started Ailíneofar an plána oibre leis an radharc reatha gach uair a thosófar ordú Automatic Automatic Offset Fritháireamh An optional offset to give to the working plane above its base position. Use this together with one of the buttons above Fritháireamh roghnach le tabhairt don eitleán oibre os cionn a bhunshuímh. Bain úsáid as seo i dteannta ceann amháin de na cnaipí thuas If this is selected, the working plane will be centered on the current view when pressing one of the buttons above Má roghnaítear é seo, beidh an plána oibre lárnaithear an radharc reatha nuair a bhrúnn tú ceann de na cnaipí thuas Center plane on view Plána lárnach le feiceáil Centers the working plane on the current view when pressing one of the buttons above Lárnaíonn sé an plána oibre ar an radharc reatha nuair a bhrúnn tú ceann de na cnaipí thuas Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Nó roghnaigh buaicphointe amháin chun an plána oibre reatha a bhogadh gan a threoshuíomh a athrú. Ansin brúigh an cnaipe thíos. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. Bogann sé an plána oibre gan a threoshuíomh a athrú. Mura roghnaítear aon phointe, bogfar an plána go lár an radhairc. Move Working Plane Bog an Plána Oibre The color of the grid Dath an eangaigh Grid color Dath an ghreille The distance between grid lines An fad idir línte eangaí The number of squares between major grid lines Líon na gcearnóg idir na príomhlínte eangaí Major lines every Príomhlínte gach squares cearnóga Grid size Méid an ghreille The distance at which a point can be snapped to An fad ag a bhféadfar pointe a snapáil Center View Radharc Láir Resets the working plane to its next position Athshocraíonn sé an plána oibre go dtí a chéad suíomh eile Next Ar Aghaidh Grid spacing Spásáil ghreille The number of squares in the X- and Y-direction of the grid Líon na gcearnóg i dtreo X agus i dtreo Y an eangaigh Snapping radius Gaoithe snapála Centers the view on the current working plane Lárnaíonn sé an radharc ar an eitleán oibre reatha Resets the working plane to its previous position Athshocraíonn sé an plána oibre go dtí a shuíomh roimhe seo Previous Roimhe Seo Load preset Luchtaigh réamhshocrú Shape Cruth Ambient shape color Dath cruth comhthimpeallach Emissive shape color Dath cruth astaíochta Specular shape color Dath cruth lonrach Shape transparency Trédhearcacht cruth Shape shininess Lonracht cruth Other Eile Line color Line color Line width Line width px px Draw style Stíl tarraingthe Solid Soladach Dashed Briste Dotted Poncaithe DashDot DashDot Display mode Mód taispeána Flat Lines Línte Cothroma Wireframe Sreangfhráma Shaded Scáthaithe Fill the values below from a stored style preset Líon na luachanna thíos ó réamhshocrú stíl stóráilte Point color Dath pointe Point size Méid pointe Points Pointí Shape color Dath cruth Annotations Annotations Extension line length Fad líne síneadh Extension line overshoot Ró-shíneadh líne síneadh Text spacing Spásáil téacs Text color Dath an téacs Dimensions Dimensions Dot Ponc Annotation Anótáil Texts Téacsanna Line spacing factor Fachtóir spásála líne The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Is é an t-iolraitheoir scála anótála inbhéart an scála atá socraithe sa ghiuirléid scála anótála. Más é 1:100 an scála, is é 100 an t-iolraitheoir. Start arrow type Cineál saighead tosaigh Circle Ciorcal Arrow Saighead Tick Tic Tick-2 Tic-2 None Dada Start arrow size Méid saighead tosaigh End arrow type Cineál saighead deiridh End arrow size Méid saighead deiridh The unit override for dimensions. Leave blank to use the current FreeCAD unit. An sár-aonad le haghaidh toisí. Fág bán chun an t-aonad FreeCAD reatha a úsáid. Dimension line overshoot Ró-lámhach líne toise The distance the dimension line is extended past the extension lines An fad a shíntear an líne thoise thar na línte síneadh The color for texts, dimension texts and label texts An dath do théacsanna, téacsanna toise agus téacsanna lipéid Font name Ainm cló The font for texts, dimensions and labels An cló le haghaidh téacsanna, toisí agus lipéid Font size Méid cló The height for texts, dimension texts and label texts An airde do théacsanna, téacsanna toise agus téacsanna lipéid The line spacing for multi-line texts and labels (relative to the font size) An spásáil líne le haghaidh téacsanna agus lipéid il-líne (i gcoibhneas le méid an chló) Scale multiplier Iolraitheoir scála Line and arrow color Dath líne agus saigheada Style Settings Socruithe Stíle Saves the current style as a preset Sábhálann sé an stíl reatha mar réamhshocrú Shape Appearance Dealramh Cruth Lines and Arrows Línte agus Saigheada Adds a unit symbol to dimension texts Cuireann siombail aonaid le téacsanna toise The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. Fad na línte síneadh. Úsáid 0 le haghaidh línte síneadh iomlána. Sainmhíníonn luach diúltach an bhearna idir foircinn na línte síneadh agus na pointí tomhaiste. Sainmhíníonn luach dearfach uasfhad na línte síneadh. Úsáidtear é le haghaidh toisí líneacha amháin. The length of extension lines above the dimension line Fad na línte síneadh os cionn na líne toise The space between the dimension line and the dimension text An spás idir an líne thoise agus an téacs toise Apply the above style to selected object(s) Cuir an stíl thuas i bhfeidhm ar an réad(na réadanna) roghnaithe Apply the above style to all annotations (texts, dimensions and labels) Cuir an stíl thuas i bhfeidhm ar gach nóta (téacsanna, toisí agus lipéid) Show unit Taispeáin an t-aonad Unit override Sárú aonaid Selected Selected Hatch Hatch PAT file PAT file Pattern Pattern Scale Scála Rotation Rotation Align to face Ailínigh le aghaidh Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. Ailíníonn sé an patrún leis an réad bonn. Seachas sin, ailíníonn an patrún leis an gcóras comhordanáidí domhanda. Athraíonn an socrú seo an mhaoin Aistrigh. Pattern files (*.pat *.PAT) Comhaid phatrún (*.pat *.PAT) Gui::Dialog::DlgSettingsDraft Default working plane Plána oibre réamhshocraithe General Ginearálta The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. Líon na ndeachúlacha a úsáidtear in oibríochtaí comhordanáide inmheánacha (mar shampla 3 = 0.001). De ghnáth meastar gurb iad luachanna idir 6 agus 8 an chomhbhabhtáil is fearr. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. An plána oibre réamhshocraithe do radharcanna nua. Má shocraítear é go "Uathoibríoch", ailíneofar an plána oibre go huathoibríoch leis an radharc reatha aon uair a thosófar ordú. Ina theannta sin, ailíneofar é le haghaidheanna plánacha réamhroghnaithe, nó nuair a roghnaítear pointí ar aghaidheanna plánacha le linn orduithe. XY (Top) XY (Barr) XZ (Front) XZ (Tosaigh) YZ (Side) YZ (Taobh) If checked, a widget indicating the current working plane orientation appears when picking points Má tá sé seiceáilte, feictear giuirléid a léiríonn treoshuíomh an eitleáin oibre reatha agus pointí á bpiocadh If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. Má tá tic sa rogha seo, áirítear grúpaí sa liosta anuas sraitheanna freisin. Is féidir réada a chur leis na grúpaí go huathoibríoch ansin chomh maith. Include groups in layer list Cuir grúpaí san áireamh sa liosta sraitheanna If checked, base objects, instead of created copies, are selected after copying Más seiceáilte, roghnaítear bunréada, seachas cóipeanna cruthaithe, tar éis cóipeála If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. Má tá sé seo seiceáilte, cruthóidh orduithe Dréachta bunphrionsabail Páirte in ionad réada Dréachta. Tabhair faoi deara nach dtacaítear go hiomlán leis seo, agus ní bheidh go leor réad in-eagarthóireachta le horduithe modhnaithe Dréachta. Create Part primitives if possible Cruthaigh bunphrionsabail Chuid más féidir If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. Má tá sé seo seiceáilte, coinneoidh Íosghrádú Dréachta agus Uasghrádú Dréachta dathanna aghaidhe. I gcás na roghanna splitFaces agus makeShell amháin. Keep face colors during downgrade/upgrade Coinnigh dathanna aghaidhe le linn íosghrádaithe/uasghrádaithe If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. Má tá sé seo seiceáilte, coinneoidh Íosghrádú Dréachta agus Uasghrádú Dréachta ainmneacha aghaidheanna. I gcás na roghanna splitFaces agus makeShell amháin. Keep face names during downgrade/upgrade Coinnigh ainmneacha aghaidhe le linn íosghrádaithe/uasghrádaithe This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. Is moill í seo ina mbíonn an luch neamhghníomhach, tar éis uimhreacha a iontráil de láimh in aon cheann de na réimsí comhordanáidí. Má shocraítear seo go 0, díchumasaítear an mhoill. Má shocraítear moill 1, tar éis luach uimhriúil a iontráil, ní dhéanfaidh an luch an réimse a nuashonrú a thuilleadh le linn soicind amháin, chun cosc ​​a chur ar an luch a bhogadh trí thimpiste agus an luach iontráilte a mhodhnú. Edit node pick radius Cuir ga roghnúcháin nóid in eagar The pick radius of edit nodes Ga piocadh nóid eagarthóireachta Label prefix for clones Réimír lipéid do chlóin The default prefix added to the label of new clones An réimír réamhshocraithe a chuirtear le lipéad na gclón nua Construction group label Lipéad grúpa tógála The default label for the construction geometry group An lipéad réamhshocraithe don ghrúpa geoiméadrachta tógála The default color for Draft objects in construction mode An dath réamhshocraithe do réada Dréachta i mód tógála Internal precision level Leibhéal cruinneas inmheánach Show working plane orientation Taispeáin treoshuíomh an eitleáin oibre Command Options Roghanna Ordú If checked, instructions are displayed in the Report View when using Draft commands Más seiceáilte é, taispeántar treoracha sa Radharc Tuairisce agus orduithe Dréachta á n-úsáid Show prompts in the Report View Taispeáin leideanna sa Radharc Tuairiscithe If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. Má tá sé seiceáilte, beidh fócas tosaigh ar ionchur Fad, in ionad chomhordanáid X. Ligeann sé seo treo a léiriú agus ansin achar a chlóscríobh. Set focus on Length instead of X coordinate Fócas a chur ar an bhFad in ionad an chomhordanáid X Select base objects after copying Roghnaigh réada bonn tar éis cóipeála Maximum number of editable objects Uasmhéid na n-ábhar in-eagarthóireachta Construction Tógáil Construction geometry color Dath geoiméadracht tógála Draft classic style Dréacht stíl chlasaiceach Bitsnpieces style Stíl Bitsnpieces Visual Amhairc SVG Patterns Patrúin SVG SVG pattern size Méid patrún SVG The default size for SVG patterns. A higher value results in a denser pattern. An méid réamhshocraithe do phatrúin SVG. Má tá luach níos airde agat, bíonn patrún níos dlúithe ann. Additional SVG pattern location Suíomh patrún SVG breise An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns Eolaire roghnach le comhaid SVG saincheaptha ina bhfuil sainmhínithe patrún le cur leis na patrúin chaighdeánacha Drawing View Line Definitions Sainmhínithe Líne Radharc Líníochta Dashed line definition Sainmhíniú líne poncaithe An SVG linestyle definition Sainmhíniú ar stíl líne SVG Dashdot line definition Sainmhíniú líne Daisponc Dotted line definition Sainmhíniú líne poncaithe Texts and dimensions Téacsanna agus toisí Font size Méid cló mm mm Lines and Arrows Línte agus Saigheada Start arrow type Cineál saighead tosaigh The default symbol displayed at the start of dimension lines An tsiombail réamhshocraithe a thaispeántar ag tús na línte toise None Dada Start arrow size Méid saighead tosaigh The default starting arrow size Méid réamhshocraithe an tsaighead tosaigh End arrow type Cineál saighead deiridh The default symbol displayed at the end of dimension lines An tsiombail réamhshocraithe a thaispeántar ag deireadh na línte toise End arrow size Méid saighead deiridh The default ending arrow size Méid réamhshocraithe an tsaighead deiridh Number of decimals Líon na ndeachúlacha Dimension Details Sonraí Toise Extension line overshoot Ró-shíneadh líne síneadh Dimension line overshoot Ró-lámhach líne toise The default annotation scale multiplier. This is the inverse of the scale set in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. An t-iolraitheoir scála réamhshocraithe don anótáil. Seo inbhéart na scála atá socraithe sa Ghiuirléid Scála Dréachta. Más é 1:100 an scála, is é 100 an t-iolraitheoir. Texts Téacsanna The default height for texts, dimension texts and label texts An airde réamhshocraithe do théacsanna, téacsanna toise agus téacsanna lipéid Line spacing factor Fachtóir spásála líne The default line spacing for multi-line texts and labels (relative to the font size) An spásáil líne réamhshocraithe le haghaidh téacsanna agus lipéid il-líne (i gcoibhneas le méid an chló) Scale multiplier Iolraitheoir scála Texts and Dimensions Téacsanna agus Toisí Annotations Annotations Font name Ainm cló The default font for texts, dimensions and labels An cló réamhshocraithe le haghaidh téacsanna, toisí agus lipéid Text color Dath an téacs The default color for texts, dimension texts and label texts An dath réamhshocraithe do théacsanna, téacsanna toise agus téacsanna lipéid If checked, the dimension line is displayed by default Má tá sé seiceáilte, taispeántar an líne thoise de réir réamhshocraithe Show dimension line Taispeáin líne toise Line width Line width The default line width An leithead líne réamhshocraithe px px Dot Ponc Circle Ciorcal Arrow Saighead Tick Tic Tick-2 Tic-2 Line and arrow color Dath líne agus saigheada The default color for lines and arrows An dath réamhshocraithe do línte agus saigheada Units Aonaid If checked, a unit symbol is added to dimension texts by default Má tá sé seiceáilte, cuirtear siombail aonaid le téacsanna toise de réir réamhshocraithe Show unit Taispeáin an t-aonad Unit override Sárú aonaid The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. An sár-aonad réamhshocraithe do thoisí. Cuir isteach aonad ar nós m nó cm, fág bán chun an t-aonad reatha atá sainmhínithe i FreeCAD a úsáid. The default number of decimal places for dimension texts An líon réamhshocraithe de dheachúlacha le haghaidh téacsanna toise The optional string inserted between the feet and inches values in dimensions An teaghrán roghnach a chuirtear isteach idir luachanna na gcos agus na n-orlach sna toisí The default distance the dimension line is extended past the extension lines An fad réamhshocraithe a shíntear an líne thoise thar na línte síneadh Extension line length Fad líne síneadh The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. Fad réamhshocraithe na línte síneadh. Úsáid 0 le haghaidh línte síneadh iomlána. Sainmhíníonn luach diúltach an bhearna idir foircinn na línte síneadh agus na pointí tomhaiste. Sainmhíníonn luach dearfach uasfhad na línte síneadh. Úsáidtear é le haghaidh toisí líneacha amháin. The default length of extension lines above the dimension line An fad réamhshocraithe de línte síneadh os cionn na líne toise The default space between the dimension line and the dimension text An spás réamhshocraithe idir an líne thoise agus an téacs toise Text spacing Spásáil téacs Feet separator Deighilteoir cos SVG SVG Import style Stíl allmhairithe Use default style from Part/PartDesign Úsáid an stíl réamhshocraithe ó Páirt/DearadhPáirt Use original SVG style Úsáid an stíl SVG bhunaidh If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. Mura bhfuil sé seo seiceáilte, ní tharlóidh aon chomhshó aonad. Léirmhíneofar aonad amháin sa chomhad SVG mar mhilliméadar amháin. Disable unit scaling Díchumasaigh scálú aonaid Add wires for invalid faces Cuir sreanga leis le haghaidheanna neamhbhailí Method for importing SVG object colors Modh chun dathanna réada SVG a allmhairiú If face generation results in a degenerated face, a raw wire from the original shape is added Má bhíonn aghaidh dhíghiniúna mar thoradh ar ghiniúint aghaidhe, cuirtear sreang amh ón gcruth bunaidh leis Check to cut shapes according to the even/odd SVG fill rule Seiceáil chun cruthanna a ghearradh de réir riail líonta SVG cothrom/corr Apply Cuts Cuir Gearrthacha i bhFeidhm Coordinate precision (crucial for detecting closed paths) Cruinneas comhordanáide (ríthábhachtach chun cosáin dúnta a bhrath) The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. Líon na n-áiteanna deachúlacha a úsáidtear in oibríochtaí comhordanáidí inmheánacha (mar shampla 3 = 0.001). Braitheann an luach is fearr ar mhéid absalóideach an allmhairithe. Is idir 1 agus 5 na luachanna tipiciúla. Export style Stíl easpórtála Style of SVG file to write when exporting a sketch Stíl comhaid SVG le scríobh agus sceitse á easpórtáil Translated (for print & display) Aistrithe (le haghaidh priontála agus taispeántais) Raw (for CAM) Amh (le haghaidh CAM) All white lines will appear in black in the SVG for better readability against white backgrounds Beidh na línte bána go léir le feiceáil i ndubh sa SVG le go mbeidh sé níos inléite i gcoinne cúlra bán Convert white line color to black Tiontaigh dath na líne bán go dubh Maximum segment length for discretized arcs Fad uasta na coda le haghaidh stua discréite Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. Ní thacaíonn leaganacha d'OpenCASCADE atá níos sine ná leagan 6.8 le teilgean stua. Sa chás seo, déanfar stuaí a roinnt ina ndeighleoga líne beaga. Is é an luach seo fad uasta na coda. OCA OCA Import Options Roghanna Iompórtála Imports the areas (3D faces) too Iompórtálann sé na ceantair (aghaidheanna 3T) freisin Import OCA areas Iompórtáil limistéir OCA DXF DXF Allow FreeCAD to automatically download and update the DXF libraries Lig do FreeCAD na leabharlanna DXF a íoslódáil agus a nuashonrú go huathoibríoch Import Iompórtáil All objects containing faces will be exported as 3D polyface meshes Déanfar gach réad ina bhfuil aghaidheanna a easpórtáil mar mhogaill il-aghaidhe 3T Project exported objects along current view direction Tionscnamh réada easpórtáilte feadh treo an radhairc reatha Use colors from the DXF file Úsáid dathanna ón gcomhad DXF Join geometry Ceangail geoiméadracht Use standard font size for texts Úsáid méid cló caighdeánach le haghaidh téacsanna Render polylines with width Rindreáil polalínte le leithead Ellipse export is poorly supported. Use this to export them as polylines instead. Tá droch-thacaíocht ann d’onnmhairiú eilips. Bain úsáid as seo chun iad a easpórtáil mar pholalínte ina ionad. Treat ellipses and splines as polylines Déileáil le héileipsí agus splíní mar pholalínte If checked, this preferences dialog will be shown each time you import or export a DXF file. Má tá sé seo seiceáilte, taispeánfar an bosca dialóige roghanna seo gach uair a dhéanann tú comhad DXF a allmhairiú nó a onnmhairiú. Show the importer dialog when importing a file Taispeáin an dialóg allmhaireora agus comhad á allmhairiú Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. Bain úsáid as an sean-allmhaireoir Python. Tá níos mó gnéithe san allmhaireoir seo ach tá sé níos moille agus teastaíonn leabharlann sheachtrach uaidh. Use legacy importer Úsáid an t-allmhaireoir oidhreachta Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. Bain úsáid as an sean-onnmhaireoir Python. Tá níos mó gnéithe san onnmhaireoir seo ach tá sé níos moille agus teastaíonn leabharlann sheachtrach uaidh. Use legacy exporter Úsáid an t-easpórtálaí oidhreachta Automatic Update (Legacy Only) Nuashonrú Uathoibríoch (Seanleagan Amháin) If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. Má tá sé seo seiceáilte, ceadaítear do FreeCAD na leabharlanna Python a theastaíonn ón sean-allmhaireoir a íoslódáil agus a nuashonrú. Is féidir é seo a dhéanamh de láimh freisin tríd an mbreiseán 'dxf_library' a shuiteáil ón mBainisteoir Breiseán. Import As Iompórtáil Mar Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Cruthaíonn sé réada Dréachta lánpharaiméadracha. Iompórtáiltear sainmhínithe bloc mar réada in-athúsáidte (Comhdhúile Cuid) agus bíonn samplaí ina réada `App::Link`, ag cothabháil struchtúr na mbloc. Is fearr é le haghaidh comhtháthú iomlán leis an mbinse oibre Dréachta. Editable Draft objects (highest fidelity, slowest) Réada Dréachta In-eagarthóireachta (an dílseacht is airde, an ceann is moille) DxfImportMode Mód Iompórtála Dxf Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. Cruthaíonn sé réada Cuid paraiméadracha (e.g., Cuid::Líne, Cuid::Ciorcal). Iompórtáiltear sainmhínithe bloic mar réada in-athúsáidte (Comhdhúile Cuid) agus bíonn samplaí ina réada `App::Link`, ag coinneáil struchtúr na mbloc. Is fearr é le haghaidh iarphróiseála bunaithe ar scripteanna agus comhtháthú binse oibre Cuid. Editable Part primitives (high fidelity, slower) Bunphrionsabail Chuid In-Eagarthóireachta (ard-dhílseacht, níos moille) Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Cruthaíonn sé cruth neamhpharaiméadrach do gach eintiteas DXF. Déantar sainmhínithe bloc a allmhairiú mar réada in-athúsáidte (Comhdhúile Cuid) agus bíonn samplaí ina réada `App::Link`, ag coinneáil struchtúr na mbloc. Go maith le haghaidh tagartha agus tomhais. Individual Part shapes (balanced, recommended) Cruthanna Codanna Aonair (cothromaithe, molta) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. Cuireann sé seo gach geoiméadracht in aghaidh an tsraithe le chéile i gcruth aonair nach féidir a chur in eagar. Ní choimeádtar struchtúir bhloc; bíonn a ngeiméadracht mar chuid de chruth an tsraithe. Is fearr é seo chun comhaid an-mhóra a allmhairiú agus a fheiceáil leis an bhfeidhmíocht is mó. Fused Part shapes (lowest fidelity, fastest) Cruthanna Cuid Chomhleáite (an dílseacht is ísle, an ceann is tapúla) Import Settings Socruithe Iompórtála Global scaling factor Fachtóir scálaithe domhanda Scale factor to apply to DXF files on import. The factor is the conversion between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 Fachtóir scála le cur i bhfeidhm ar chomhaid DXF agus iad á n-allmhairiú. Is é an fachtóir an tiontú idir aonad an chomhaid DXF agus milliméadair. Sampla: do chomhaid i milliméadair: 1, i gceintiméadair: 10, i méadair: 1000, in orlaigh: 25.4, i dtroithe: 304.8 If checked, text, mtext, and dimension entities will be imported as Draft objects Má tá sé seiceáilte, déanfar téacs, mtext, agus eintitis toise a allmhairiú mar réada Dréachta If checked, point entities will be imported Má tá sé seiceáilte, déanfar eintitis phointe a allmhairiú Points Pointí If checked, entities from the paper space will also be imported. By default, only model space is imported Má tá sé seo seiceáilte, déanfar eintitis ón spás páipéir a allmhairiú freisin. De réir réamhshocraithe, ní allmhairítear ach spás samhail Paper space objects Réada spáis páipéir If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions Má tá sé seo seiceáilte, déanfar bloic gan ainm (a dtosaíonn a n-ainmneacha le *) a allmhairiú freisin. Úsáidtear iad seo go minic le haghaidh haistí agus toisí Anonymous blocks (*-blocks) Bloic gan ainm (bloic *) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) Má tá tic sa bhosca seo, déanfar teorainneacha na n-ábhar hata a allmhairiú mar shreanga dúnta. (Allmhaireoir oidhreachta amháin) Hatch boundaries Teorainn haiste Appearance Dealramh If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied Má tá sé seo seiceáilte, socrófar na dathanna mar atá sonraithe sa chomhad DXF aon uair is féidir. Seachas sin, cuirfear dathanna réamhshocraithe FreeCAD i bhfeidhm If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) Má tá sé seo seiceáilte, gheobhaidh téacsanna allmhairithe an méid caighdeánach Dréachta, seachas an méid atá sainithe sa doiciméad DXF. (Allmhaireoir oidhreachta amháin) Advanced processing Próiseáil ardleibhéil If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) Má tá sé seo seiceáilte, déanfaidh an t-allmhaireoir oidhreachta iarracht réada geoiméadracha comhthráthacha a cheangal le chéile i sreanga. Is féidir go mbeadh sé seo mall le haghaidh comhad mór. (Allmhaireoir oidhreachta amháin) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) Má tá sé seo seiceáilte, déanfar polalínte a bhfuil airí leithead acu a rindreáil mar aghaidheanna a léiríonn an leithead sin. (Allmhaireoir oidhreachta amháin) If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting Má tá sé seo seiceáilte, déanfaidh an t-allmhaireoir oidhreachta iarracht réada Sketcher a chruthú in ionad réada Dréachta nó Cuid. Sáraíonn sé seo an socrú 'Iompórtáil Mar' Create sketches Cruthaigh sceitsí Export Options Roghanna Easpórtála Maximum spline segment Uasmhéid deighleog splíne Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. Uasfhad gach ceann de na codanna polalíne. Déileálann '0' leis an splíne iomlán mar dheighleog dhíreach. Export 3D objects as polyface meshes Easpórtáil réada 3T mar mhogaill il-aghaidhe TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. Déanfar Radharcanna TechDraw a easpórtáil mar bhloic. D’fhéadfadh sé seo teip i gcás teimpléid iar-DXF R12. Export TechDraw Views as blocks Easpórtáil Radharcanna TechDraw mar bhloic Exported objects will be projected to reflect the current view direction Déanfar réada onnmhairithe a theilgean chun treo an radhairc reatha a léiriú Shift Shift Always snap Snap i gcónaí Grid and Snapping Eangach agus Snapping If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. Má tá sé seo seiceáilte, taispeántar imlíne figiúr daonna sa chúinne íochtarach ar chlé den eangach. Ní bheidh sé éifeachtach ach amháin má tá "Taispeáin teorainn eangach" cumasaithe. Major lines every Príomhlínte gach The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. Líon na gcearnóg idir línte móra greille. Bíonn línte móra greille níos tibhe ná línte beaga greille. squares cearnóga Snapping and Modifier Keys Eochracha Snapála agus Mionathraithe Snap modifier Modhnóir snap The Snap modifier key An eochair mhionathraithe Snap Ctrl Ctrl Alt Alt Constrain modifier Srianadh modhnóra Alt modifier Mionathraitheoir Alt The Alt modifier key. The function of this key depends on the command. An eochair mhionathraithe Alt. Braitheann feidhm na heochrach seo ar an ordú. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. Má tá sé seo seiceáilte, beidh an eangach le feiceáil i gcónaí in radhairc nua. Bain úsáid as Draft ToggleGrid chun seo a athrú don radharc gníomhach. The distance between grid lines An fad idir línte eangaí The maximum number of objects Draft Edit is allowed to process at the same time An líon uasta réad a cheadaítear a phróiseáil ag an am céanna le Dréacht-Eagarthóireacht Grid Eangach Always show the grid Taispeáin an eangach i gcónaí If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. Má tá sé seo seiceáilte, beidh an eangach le feiceáil le linn orduithe i radharcanna nua. Bain úsáid as Draft ToggleGrid chun seo a athrú don radharc gníomhach. Show the grid during commands Taispeáin an eangach le linn orduithe If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner Má tá sé seo seiceáilte, taispeántar teorainn bhreise timpeall an eangaigh, ag taispeáint méid an phríomhchearnóige sa chúinne íochtarach ar chlé Show grid border Taispeáin teorainn an ghreille Show human figure Taispeáin figiúr daonna If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system Más seiceáilte é seo, beidh dath dearg, glas nó gorm ar an dá phríomhais den ghreille má mheaitseálann siad ais X, Y nó Z an chórais chomhordanáidí dhomhanda Use colored axes Úsáid aiseanna daite Grid spacing Spásáil ghreille Grid size Méid an ghreille The number of squares in the X- and Y-direction of the grid Líon na gcearnóg i dtreo X agus i dtreo Y an eangaigh Grid transparency Trédhearcacht an ghreille % % Grid color Dath an ghreille The constrain modifier key An eochair mhionathraithe srianta Snap symbol style Stíl siombail snap Mouse delay Moill luiche seconds seconds The style for snap symbols An stíl do shiombailí snap Snap symbol color Dath siombail snap The color for snap symbols An dath do shiombailí snap If checked, snapping is activated without the need to press the Snap modifier key Más seiceáilte é, cuirtear snapáil i ngníomh gan gá an eochair mhionathraithe Snap a bhrú The color of the grid Dath an eangaigh The overall transparency of the grid Trédhearcacht fhoriomlán an eangaigh DWG DWG This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. Seo an modh a úsáidfidh FreeCAD chun comhaid DWG a thiontú go DXF. Má roghnaítear "Uathoibríoch", déanfaidh FreeCAD iarracht ceann de na tiontairí seo a leanas a aimsiú san ord céanna a thaispeántar anseo. Mura bhfuil FreeCAD in ann aon cheann a aimsiú, b'fhéidir go mbeidh ort tiontaire ar leith a roghnú agus a chonair a léiriú anseo thíos. Roghnaigh an fóntais "dwg2dxf" má tá LibreDWG in úsáid agat, "ODAFileConverter" má tá an tiontaire comhad ODA in úsáid agat, nó an fóntais "dwg2dwg" má tá leagan pro de QCAD in úsáid agat. Automatic Automatic DWG Conversion Comhshó DWG Conversion method Modh comhshó LibreDWG LibreDWG ODA Converter Tiontaire ODA QCAD pro QCAD pro Path to file converter Cosán chuig tiontaire comhad The path to your DWG file converter executable An cosán chuig d’fhorghníomhaithe tiontaire comhaid DWG <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> <html><head/><body><p><span style="font-weight:600;">Nóta:</span> Baineann roghanna DXF le comhaid DWG chomh maith.</p></body></html> Relative Gaolmhar R R Continue Lean ar aghaidh Close Dún O O Copy Cóipeáil L L Interface Comhéadan F F Select edge Roghnaigh imeall Subelement mode Mód fo-eiliminte B B C C Exit Scoir A A Increase radius Méadaigh an ga Decrease radius Laghdaigh an ga E O Q Q Length Fad Wipe Glan W I U U Global Domhanda In-Command Shortcuts Aicearraí In-Ordú G G Make face Déan aghaidh Undo Undo N N Cycle snap Snap timthriall Add hold Cuir coinneáil leis Set working plane Socraigh plána oibre Snap Snap S D Restrict X Srian a chur ar X X X Restrict Y Srian a chur ar Y Y Y Restrict Z Srian a chur ar Z Z Z Recenter Ath-lár D D UI Options Roghanna Chomhéadain Úsáideora If checked, the Draft Snap toolbar will only be visible during commands Más seiceáilte é, ní bheidh an barra uirlisí Draft Snap le feiceáil ach amháin le linn orduithe Only show the Draft Snap toolbar during commands Taispeáin an barra uirlisí Draft Snap amháin le linn orduithe If checked, the Draft Snap Widget is displayed in the Draft Status Bar Más seiceáilte é, taispeántar an Giuirléid Dréachta sa Bharra Stádas Dréachta Show the Draft Snap Widget in the Draft Workbench Taispeáin an Gléas Dréachta Snap sa Bhinse Oibre Dréachta If checked, the Draft Scale Widget is displayed in the Draft Status Bar Más seiceáilte é, taispeántar an Ghiuirléid Scála Dréachta sa Bharra Stádas Dréachta Show the Draft Scale Widget in the Draft Workbench Taispeáin an Ghiuirléid Scála Dréachta sa Bhinse Oibre Dréachta draft Relative Gaolmhar Global Domhanda Continue Lean ar aghaidh If checked, the command will not finish until pressing the command button again Más seiceáilte é, ní chríochnóidh an t-ordú go dtí go mbrúfar an cnaipe ordaithe arís If checked, the next dimension will be placed in a chain with the previously placed Dimension Má tá sé seo seiceáilte, cuirfear an chéad toise eile i slabhra leis an Toise a cuireadh roimhe seo Close Dún Set Working Plane Set Working Plane Select Edge Roghnaigh Imeall Copy Cóipeáil Wipe Glan All shapes must be coplanar Caithfidh gach cruth a bheith comhphlánach Selected shapes must define a plane Ní mór do na cruthanna roghnaithe plána a shainiú Top Barr Front Tosaigh Side Taobh Auto Uathoibríoch Current working plane: Auto Plána oibre reatha: Uathoibríoch Current working plane: Plána oibre reatha: Selected shapes do not define a plane Ní shainmhíníonn na cruthanna roghnaithe plána No previous working plane Gan aon eitleán oibre roimhe seo No next working plane Níl aon eitleán oibre eile ann Axes: Aiseanna: Position: Seasamh: None Dada active command: ordú gníomhach: Active Draft command Ordú Dréacht Ghníomhach X coordinate of the point Comhordanáid X an phointe X X Y Y Z Z Length Fad Angle Uillinn Radius Ga Creates the text object and finishes the command Cruthaíonn sé an réad téacs agus críochnaíonn sé an t-ordú Changes the default style for new objects Athraíonn sé an stíl réamhshocraithe do réada nua Toggles construction mode Athraíonn an modh tógála Label Type Cineál Lipéid Radius of Circle Ga an Chiorcail Coordinates relative to last point or to coordinate system origin if is the first point to set Comhordanáidí i gcoibhneas leis an bpointe deireanach nó le bunús an chórais chomhordanáidí más é an chéad phointe le socrú Y coordinate of the point Comhordanáid Y an phointe Z coordinate of the point Comhordanáid Z an phointe Enter Point Iontráil Pointe Length of the current segment Fad na coda reatha Angle of the current segment Uillinn na coda reatha Locks the current angle Glasálann sé an uillinn reatha Radius of the circle Ga an chiorcail Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Comhordanáidí i gcoibhneas leis an gcóras comhordanáidí domhanda. Díthiceáil chun córas comhordanáidí an eitleáin oibre a úsáid Finish Críochnaigh Finishes the current drawing or editing operation Críochnaíonn sé an líníocht nó an oibríocht eagarthóireachta reatha Modify Objects Modhnaigh Réada Facebinder Elements Eilimintí Ceanglóra Aghaidhe If checked, an OCC-style offset will be performed instead of the classic offset Más seiceáilte é, déanfar fritháireamh de stíl OCC in ionad an fhritháirimh chlasaicigh OCC-style offset Fritháireamh stíl OCC Undo Undo If checked, objects will be copied instead of moved Más seiceáilte é, déanfar réada a chóipeáil in ionad iad a bhogadh Undo the last segment Cealaigh an chuid dheireanach Enter a point with given coordinates Cuir isteach pointe leis na comhordanáidí tugtha Make face Déan aghaidh If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled Má tá sé seo seiceáilte, líonfar an réad le haghaidh. Ní bheidh sé ar fáil má tá an rogha 'Úsáid Bunphrionsabail Chuid' cumasaithe Chained mode Mód slabhraithe Finishes and closes the current line Críochnaíonn agus dúnann an líne reatha Wipes the existing segments of this line and starts again from the last point Scriosann sé na codanna atá ann cheana féin den líne seo agus tosaíonn sé arís ón bpointe deireanach Reorients the working plane on the last segment Aththreoraíonn sé an plána oibre ar an deighleog dheireanach Selects an existing edge to be measured by this dimension Roghnaíonn sé imeall atá ann cheana féin le tomhas leis an toise seo Sides Taobhanna Number of sides Líon na dtaobhanna Modify subelements Fo-eilimintí a mhodhnú If checked, subelements will be modified instead of entire objects Má tá sé seo seiceáilte, déanfar fo-eilimintí a mhodhnú in ionad réada iomlána Autogroup off Uathghrúpáil múchta Line Líne DWire DWire Circle Ciorcal Arc Arc Rotate Rotate Point Pointe Label Lipéad Offset Fritháireamh Distance Fad Offset distance Fad fritháireamh Trimex Trimex Local {} Áitiúil {} Global {} Domhanda {} Autogroup: Uathghrúpa: Faces Aghaidheanna Remove Bain Add Cuir leis Draft Dréacht Converting: Ag comhshó: Conversion successful Comhshó rathúil LibreDWG converter not found Níor aimsíodh tiontaire LibreDWG ODA converter not found Níor aimsíodh tiontaire ODA QCAD converter not found Níor aimsíodh tiontaire QCAD No suitable external DWG converter has been found. Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences Ní bhfuarthas aon tiontaire DWG seachtrach oiriúnach. Socraigh ceann de láimh faoin roghchlár Eagar → Roghanna → Iompórtáil/Easpórtáil → DWG Le haghaidh tuilleadh eolais féach: https://wiki.freecad.org/Import_Export_Preferences Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. Earráid le linn tiontú DWG. Bain triail as an gcomhad DWG a bhogadh chuig cosán eolaire gan spásanna agus carachtair nach bhfuil i mBéarla, nó bain triail as é a shábháil chuig leagan níos óige de DWG. Custom Custom Unable to convert input into a scale factor Ní féidir ionchur a thiontú ina fhachtóir scála Set Custom Scale Socraigh Scála Saincheaptha Draft Scale Widget A context menu action used to show or hide this toolbar widget Giuirléid Scála Dréachta Set the scale used by Draft annotation tools Socraigh an scála a úsáideann uirlisí anótála Dréachta Draft Snap Widget A context menu action used to show or hide this toolbar widget Giuirléid Dréachta Snap Set custom annotation scale in format x:x, x=x Socraigh scála anótála saincheaptha i bhformáid x:x, x=x No active document. Aborting. Gan aon doiciméad gníomhach. Ag cur as oifig. Wrong input: object {} not in document. Ionchur mícheart: níl réad {} sa cháipéis. Unable to insert new object into a scaled part Ní féidir réad nua a chur isteach i gcuid scálaithe Symbol not implemented. Using a default symbol. Níl an tsiombail curtha i bhfeidhm. Tá an tsiombail réamhshocraithe á húsáid. image is Null is nialasach an íomhá filename does not exist on the system or in the resource file níl ainm comhaid ann ar an gcóras ná sa chomhad acmhainní unable to load texture ní féidir uigeacht a luchtú Does not have 'ViewObject.RootNode'. Níl 'ViewObject.RootNode' ann. Solids: Solaid: Faces: Aghaidheanna: Wires: Sreanga: Edges: Imeall: Vertices: Buaicphointí: Face Aghaidh Wire Sreang different types cineálacha éagsúla Objects have different placements. Distance between the two base points: Tá suíomhanna difriúla ag rudaí. An fad idir an dá phointe bonn: %s cannot be modified because its placement is readonly Ní féidir %s a mhodhnú mar go bhfuil a shuíomh inléite amháin This function will be deprecated in {}. Please use '{}'. Beidh an fheidhm seo as feidhm i {}. Bain úsáid as '{}' le do thoil. This function will be deprecated. Please use '{}'. Beidh an fheidhm seo as feidhm. Bain úsáid as '{}' le do thoil. has a different value tá luach difriúil aige doesn't exist in one of the objects níl sé ann i gceann de na rudaí %s shares a base with %d other objects. Please check if you want to modify this. Tá bonn comhroinnte ag %s le %d réad eile. Seiceáil le do thoil más mian leat é seo a mhodhnú. Wrong input: unknown document {} Ionchur mícheart: doiciméad anaithnid {} Pick target point Roghnaigh pointe sprice Create Label Cruthaigh Lipéad Pick endpoint of leader line Roghnaigh críochphointe na líne ceannaire Pick text position Roghnaigh suíomh téacs Pick first point Roghnaigh an chéad phointe Edges do not intersect! Ní thrasnaíonn imill a chéile! Create Line Cruthaigh Líne Create Wire Cruthaigh Sreang %1 pick next point, snap to first point to close %1 roghnaigh an chéad phointe eile, snap chuig an gcéad phointe le dúnadh %1 pick next point %1 roghnaigh an chéad phointe eile Unable to create a wire from the selected objects Ní féidir sreang a chruthú ó na rudaí roghnaithe Polyline Polalíne Pick next point Roghnaigh an chéad phointe eile Convert to Wire Tiontaigh go Sreang Select an object to join Roghnaigh réad le bheith páirteach ann Join Lines Línte a Cheangail Only Draft lines and wires can be joined Ní féidir ach línte agus sreanga dréachta a cheangal le chéile Selection: Rogha: Pick location point Roghnaigh pointe suímh Create Text Cruthaigh Téacs Select an object to convert Roghnaigh réad le tiontú Convert to Sketch Tiontaigh go Sceitse Convert to Draft Tiontaigh go Dréacht Convert Draft/Sketch Tiontaigh Dréacht/Sceitse Select an object to move Roghnaigh réad le bogadh Pick start point Roghnaigh pointe tosaigh Pick end point Roghnaigh pointe deiridh No valid subelements selected Níl aon fho-eilimintí bailí roghnaithe Move Bog Pick center point Roghnaigh pointe lárnach Pick radius Roghnaigh ga Start angle Uillinn tosaigh Pick start angle Roghnaigh uillinn tosaigh Aperture angle Uillinn an chró Pick aperture Roghnaigh cró %1 constrain srian %1 %1 snap %1 snap %1/%2/%3 switch constraint Srian lasc %1/%2/%3 %1 toggle relative %1 scoránaigh gaolmhar %1 toggle global %1 scoránaigh dhomhanda %1 toggle continue %1 scoránaigh leanúint ar aghaidh %1 pick center %1 ionad piocadh %1 pick radius %1 ga piocála %1 pick aperture %1 cró piocadh Create Circle (Part) Cruthaigh Ciorcal (Cuid) Create Circle Cruthaigh Ciorcal Create Arc (Part) Cruthaigh Arc (Cuid) Create Arc Cruthaigh Arc Pick aperture angle Roghnaigh uillinn oscailte %1 pick start angle %1 uillinn tosaigh piocála Arc From 3 Points Arc ó 3 Phointe Create Arc From 3 Points Cruthaigh Arc ó 3 Phointe %1 pick first point %1 roghnaigh an chéad phointe %1 pick second point %1 roghnaigh an dara pointe %1 pick third point %1 roghnaigh an tríú pointe Select an object to edit Roghnaigh réad le heagarthóireacht Select a Draft object to edit Roghnaigh réad Dréachta le heagarthóireacht Edit Node Cuir Nód in Eagar Too many objects selected, maximum number set to: An iomarca rudaí roghnaithe, an líon uasta socraithe go: No edit point found for selected object Níor aimsíodh aon phointe eagarthóireachta don réad roghnaithe : this object is not editable : ní féidir an réad seo a chur in eagar Annotation Style Editor Eagarthóir Stíl Anótála New Style Stíl Nua Style name Ainm stíl Style name required Ainm stíl ag teastáil No style name specified Níor sonraíodh ainm stíl Style exists Tá stíl ann This style name already exists Tá an t-ainm stíl seo ann cheana féin Style in use Stíl in úsáid This style is used by some objects in this document. Proceed? Úsáideann roinnt réada sa cháipéis seo an stíl seo. Ar aghaidh? Rename Style Athainmnigh Stíl New name Ainm nua Open Styles File Oscail Comhad Stíleanna JSON files (*.json *.JSON) Comhaid JSON (*.json *.JSON) Save Styles File Sábháil Comhad Stíleanna JSON file (*.json) Comhad JSON (*.json) Select an object to project Roghnaigh réad le teilgean Create 2D View Create 2D View Create Point Cruthaigh Pointe %1 pick point %1 pointe piocadh Select an object to rotate Roghnaigh réad le rothlú Pick rotation center Ionad rothlaithe roghnaithe Base angle Uillinn bhunáite The base angle to start the rotation from An uillinn bhunáite chun an rothlú a thosú uaidh The amount of rotation to perform. The final angle will be the base angle plus this amount. An méid rothlaithe atá le déanamh. Is é an uillinn deiridh an uillinn bhunáite móide an méid seo. Pick base angle Roghnaigh uillinn bonn Rotation Rotation Pick rotation angle Roghnaigh uillinn rothlaithe Add to New Group Cuir le Grúpa Nua Add to Group Cuir leis an nGrúpa No new selection. Select non-empty groups or objects inside groups. Gan aon roghnú nua. Roghnaigh grúpaí nó réada nach bhfuil folamh laistigh de ghrúpaí. New Layer Sraith Nua Layer name Ainm an tsraithe Layer Object label Sraith New layer Sraith nua Add to Construction Group Cuir leis an nGrúpa Tógála New Group New Group Group name Ainm an ghrúpa Group Object label Grúpa New named group Grúpa nua ainmnithe Ungroup Díghrúpáil Group Grúpa Fillet radius Gais fillte Radius of the fillet Ga an fhilléid Enter radius Enter radius Create Fillet Cruthaigh Filléad Fillet cannot be created Ní féidir filléad a chruthú Polygon Polygon Create Polygon (Part) Cruthaigh Polagán (Cuid) Create Polygon Cruthaigh Polagán Select objects to trim or extend Roghnaigh réada le bearradh nó le síneadh This object is not supported Ní thacaítear leis an réad seo Only a single face can be extruded Ní féidir ach aghaidh amháin a easbhrú Trimex does not support this object type Ní thacaíonn Trimex leis an gcineál réada seo Unable to trim these objects, only Draft wires and arcs are supported Ní féidir na rudaí seo a bhearradh, ní thacaítear ach le sreanga dréachta agus stuaiceanna These objects do not intersect Ní thrasnaíonn na rudaí seo a chéile Too many intersection points An iomarca pointí trasnaithe Offset only works on one object at a time Ní oibríonn an fhritháireamh ach ar réad amháin ag an am Offset of Bézier curves is currently not supported Ní thacaítear le fritháireamh cuar Bézier faoi láthair Pick distance Roghnaigh achar Offset angle Uillinn fhritháireamh Unable to trim these objects, too many wires Ní féidir na rudaí seo a bhearradh, an iomarca sreanga B-Spline B-Splíne Create B-Spline Cruthaigh B-Spline Change Style Athraigh Stíl This object does not support possible coincident points Ní thacaíonn an réad seo le pointí comhthráthacha féideartha Delete Point Scrios Pointe Add Point Cuir Pointe leis Open Wire Sreang Oscailte Close Wire Dún an Sreang Reverse Wire Sreang droim ar ais Active object must have more than 2 points or nodes Ní mór níos mó ná 2 phointe nó nód a bheith ag an réad gníomhach Open Spline Splíne Oscailte Close Spline Dún an Splíne Reverse Spline Splíne droim ar ais Move Arc Bog Arc Set First Angle Socraigh an Chéad Uillinn Set Last Angle Socraigh an Uillinn Dheiridh Set Radius Socraigh Ga Invert Arc Inbhéartaigh an Arc Make Sharp Déan Géar Make Tangent Déan Tangent Make Symmetric Déan Siméadrach Reverse Curve Cuar droim ar ais Open Curve Cuar Oscailte Close Curve Dún Cuar Selection is not a knot Ní snaidhm í an roghnú Endpoint of Bézier curve cannot be smoothed Ní féidir críochphointe cuar Bézier a réidhiú Active object must have more than two points/nodes Ní mór níos mó ná dhá phointe/nód a bheith ag an réad gníomhach Bézier Curve Cuar Bézier Create Bézier Curve Cruthaigh Cuar Bézier Cubic Bézier Curve Cuar Bézier Ciúbach Click and drag to define next knot Cliceáil agus tarraing chun an chéad snaidhm eile a shainiú %1 click and drag to define first point and knot %1 cliceáil agus tarraing chun an chéad phointe agus an snaidhm a shainiú %1 click and drag to define next point and knot %1 cliceáil agus tarraing chun an chéad phointe agus an snaidhm eile a shainiú Ellipse Éilips Create Ellipse Cruthaigh Éilips Pick opposite point Roghnaigh pointe os coinne %1 pick opposite point %1 roghnaigh pointe os coinne Select faces from existing objects Roghnaigh aghaidheanna ó réada atá ann cheana féin Select an object to scale Roghnaigh réad le scálú Pick base point Roghnaigh pointe bonn Pick reference distance from base point Roghnaigh achar tagartha ón bpointe bonn Zero scale factor not allowed Ní cheadaítear fachtóir scála nialasach Scale Scála Pick new distance from base point Roghnaigh achar nua ón mbunphointe Layer Sraith Create Dimension Cruthaigh Toise Edge too short! Imeall ró-ghearr! Select an object to stretch Roghnaigh réad le síneadh Pick first point of selection rectangle Roghnaigh an chéad phointe den dronuilleog roghnúcháin Pick the opposite point of the selection rectangle Roghnaigh an pointe os coinne den dronuilleog roghnúcháin Turning a rectangle into a wire Ag casadh dronuilleog ina sreang Pick start point of displacement Roghnaigh pointe tosaigh an díláithrithe Pick end point of displacement Roghnaigh pointe deiridh an díláithrithe Stretch Síneadh Rectangle Rectangle Create Plane Cruthaigh Eitleán Create Rectangle Cruthaigh Dronuilleog Select an object to mirror Roghnaigh réad le scáthánú Pick start point of mirror line Roghnaigh pointe tosaigh na líne scátháin Mirror Scáthán Pick end point of mirror line Roghnaigh pointe deiridh na líne scátháin Select an object to clone Roghnaigh réad le clónáil Cannot clone objects without a shape, aborting Ní féidir rudaí a chlónáil gan chruth, ag cur as oifig Cannot clone objects without a shape, skipping them Ní féidir rudaí a chlónáil gan chruth, ag scipeáil iad Select an object to upgrade Roghnaigh réad le huasghrádú Upgrade Uasghrádú Select an object to offset Roghnaigh réad le fritháireamh Cannot offset this object type Ní féidir an cineál réada seo a fhritháireamh Pick ShapeString location point Roghnaigh pointe suímh ShapeString Create ShapeString Cruthaigh ShapeString Heal Cneasaigh Downgrade Íosghrádú Object: Cuspóir: Polar Array Eagar Polar Number of elements must be at least 2 Ní mór líon na n-eilimintí a bheith dhá cheann ar a laghad The angle is above 360 degrees. It is set to this value to proceed. Tá an uillinn os cionn 360 céim. Socraítear é go dtí an luach seo le dul ar aghaidh. The angle is below -360 degrees. It is set to this value to proceed. Tá an uillinn faoi bhun -360 céim. Socraítear é go dtí an luach seo le dul ar aghaidh. Create Polar Array Cruthaigh Eagar Polar Fuse: Fiús: Create Link array: Cruthaigh sraith nasc: Number of elements: Líon na n-eilimintí: Polar angle: Uillinn pholarach: Center of rotation: Lár an rothlaithe: Orthogonal Array Eagar Ortagónach Number of elements must be at least 1 Ní mór líon na n-eilimintí a bheith 1 ar a laghad In linear mode, at least 1 axis must be selected I mód líneach, ní mór ais amháin ar a laghad a roghnú Create Orthogonal Array Cruthaigh Eagar Ortagónach Create link array: Cruthaigh sraith nasc: Number of X elements: Líon na n-eilimintí X: Interval X: Eatramh X: Number of Y elements: Líon na n-eilimintí Y: Interval Y: Eatramh Y: Number of Z elements: Líon na n-eilimintí Z: Interval Z: Eatramh Z: Switch to Ortho Mode Athraigh go Mód Ortho X-Axis Ais-X Y-Axis Ais-Y Z-Axis Ais-Z Switch to Linear Mode Athraigh go Mód Líneach Number of elements Líon na n-eilimintí Interval Eatramh ShapeString SreangánCruth Default Réamhshocrú Radial distance is zero. Resulting array may not look correct. Is é nialas an fad gathach. Seans nach mbeidh cuma cheart ar an eagar mar thoradh air. Radial distance is negative. It is made positive to proceed. Is diúltach an fad gathach. Déantar dearfach de le dul ar aghaidh. Circular Array Eagar Ciorclach At least 1 element must be selected Ní mór eilimint amháin ar a laghad a roghnú Number of layers must be at least 2 Ní mór líon na sraitheanna a bheith dhá cheann ar a laghad Selection is not suitable for array Níl an rogha oiriúnach don eagar Tangential distance cannot be 0 Ní féidir achar tadhlaíoch a bheith 0 Tangential distance is negative. It is made positive to proceed. Is diúltach an fad tadhlaíoch. Déantar dearfach de le dul ar aghaidh. Create Circular Array Cruthaigh Eagar Ciorclach Radial distance: Fad gathach: Tangential distance: Fad tadhlaíoch: Number of concentric circles: Líon na gciorcal comhlárnach: Symmetry parameter: Paraiméadar siméadrachta: Font file not found Níor aimsíodh comhad cló Specified font file is not a file Specified font type is not supported Ní thacaítear leis an gcineál cló sonraithe ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: ní mór uillinn chlaonta a bheith sa raon -80 go +80 céim ShapeString: string has no wires ShapeString: níl aon sreanga ar an téad ShapeString: face creation failed for one character ShapeString: theip ar chruthú aghaidhe do charachtar amháin , path object does not have 'Edges'. , níl 'Imill' ag an réad cosáin. Start Offset too large for path length. Using 0 instead. Tá an Fritháireamh Tosaigh ró-mhór do fhad na cosáin. Úsáidtear 0 ina ionad. End Offset too large for path length minus Start Offset. Using 0 instead. Fritháireamh Deiridh ró-mhór do fhad na cosáin lúide an Fritháireamh Tosaigh. Ag baint úsáide as 0 ina ionad. Length of tangent vector is 0. Copy not aligned. Is é 0 fad an veicteora tadhlaí. Níl an chóip ailínithe. Length of normal vector is 0. Using a default axis instead. Is é 0 fad an veicteora gnáth. Úsáidtear ais réamhshocraithe ina ionad. Spacing unit of 0 is not allowed, using default Ní cheadaítear aonad spásála 0, ag úsáid an réamhshocraithe Operation would generate too many objects. Aborting Ghinfeadh an oibríocht an iomarca réad. Ag cur as oifig Tangent and normal vectors are parallel. Normal replaced by a default axis. Tá veicteoirí tadhlaí agus gnáth comhthreomhar. Cuirtear ais réamhshocraithe in ionad an ghnáth. Cannot calculate normal vector. Using the default normal instead. Ní féidir veicteoir gnáth a ríomh. Úsáidtear an gnáth-veicteoir réamhshocraithe ina ionad. AlignMode {} is not implemented Níl AlignMode {} curtha i bhfeidhm No shape found Níor aimsíodh aon chruth All shapes must be planar Caithfidh gach cruth a bheith cothrom Points: Pointí: Wrong input: must be a list or tuple of 3 points exactly. Ionchur mícheart: ní mór gur liosta nó tuple de 3 phointe go díreach é. Wrong input: must be list or tuple of 3 points exactly. Ionchur mícheart: ní mór gur liosta nó tuple de 3 phointe go beacht é. Placement: Socrúchán: Wrong input: incorrect type of placement. Ionchur mícheart: cineál mícheart socrúcháin. Wrong input: incorrect type of points. Ionchur mícheart: cineál mícheart pointí. Cannot generate shape: Ní féidir cruth a ghiniúint: Wrong input: base_object not in document. Ionchur mícheart: níl base_object sa cháipéis. Wrong input: path_object not in document. Ionchur mícheart: níl an path_object sa cháipéis. Wrong input: must be a number. Ionchur mícheart: ní mór gur uimhir í. Wrong input: must be a vector. Ionchur mícheart: ní mór gur veicteoir é. Wrong input: must be a list or tuple of strings, or a single string. Ionchur mícheart: ní mór gur liosta nó tuple teaghrán é, nó teaghrán aonair. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Ionchur mícheart: ní mór é a bheith 'Bunaidh', 'Frenet', nó 'Tangent'. Wrong input: must be a number or vector. Ionchur mícheart: ní mór gur uimhir nó veicteoir é. Input: single value expanded to vector. Ionchur: luach aonair leathnaithe go veicteoir. Wrong input: must be an integer number. Ionchur mícheart: ní mór gur uimhir shlán í. Input: number of elements must be at least 1. It is set to 1. Ionchur: ní mór líon na n-eilimintí a bheith 1 ar a laghad. Tá sé socraithe go 1. Wrong input: must be a placement, a vector, or a rotation. Ionchur mícheart: ní mór gur socrúchán, veicteoir, nó rothlú é. Wrong input: target_object must not be a list. Ionchur mícheart: ní féidir le target_object a bheith ina liosta. Wrong input: target_object not in document. Ionchur mícheart: níl target_object sa cháipéis. Wrong input: subelements must be a list or tuple of strings, or a single string. Ionchur mícheart: ní mór do fho-eilimintí a bheith ina liosta nó ina dtápla teaghrán, nó ina dtéacs aonair. Wrong input: subelement {} not in object. Ionchur mícheart: níl an fho-eilimint {} sa réad. Wrong input: label_type must be a string. Ionchur mícheart: ní mór lipéad_cineál a bheith ina theaghrán. Wrong input: label_type must be one of the following: Ionchur mícheart: ní mór lipéad_cineál a bheith ar cheann de na nithe seo a leanas: Wrong input: must be a list of strings or a single string. Ionchur mícheart: ní mór gur liosta teaghrán nó teaghrán aonair é. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Ionchur mícheart: ní mór gur teaghrán é, 'Cothrománach', 'Ingearach', nó 'Saincheaptha'. Wrong input: points {} must be a list of at least two vectors. Ionchur mícheart: ní mór do phointí {} a bheith ina liosta de dhá veicteoir ar a laghad. Direction is not 'Custom'; points won't be used. Ní 'Saincheaptha' an treo; ní úsáidfear pointí. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Ionchur mícheart: ní mór liosta de dhá eilimint a bheith ann. Mar shampla, [réad, 'Imeall1']. Wrong input: point_object not in document. Ionchur mícheart: níl point_object sa cháipéis. Wrong input: object has the wrong type. Ionchur mícheart: tá an cineál mícheart ag an réada. This function is deprecated. Do not use this function directly. Tá an fheidhm seo imithe i léig. Ná húsáid an fheidhm seo go díreach. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Bain úsáid as ceann amháin de 'make_linear_dimension', nó 'make_linear_dimension_obj'. Wrong input: edge_object must not be a list or tuple. Ionchur mícheart: ní féidir le edge_object a bheith ina liosta ná ina thupla. Wrong input: edge_object not in document. Ionchur mícheart: níl edge_object sa cháipéis. Wrong input: object doesn't have a 'Shape' to measure. Ionchur mícheart: níl 'Cruth' le tomhas ag an réad. Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. Ionchur mícheart: níl eilimint amháin ar a laghad ag an réad i 'Vertexes' le húsáid le haghaidh tomhais. Wrong input: must be an integer. Ionchur mícheart: ní mór gur slánuimhir í. i1: values below 1 are not allowed; will be set to 1. i1: ní cheadaítear luachanna faoi bhun 1; socrófar iad go 1. Wrong input: vertex not in object. Ionchur mícheart: níl an buaicphointe sa réad. i2: values below 1 are not allowed; will be set to the last vertex in the object. i2: ní cheadaítear luachanna faoi bhun 1; socrófar iad go dtí an buaicphointe deireanach sa réad. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. Ionchur mícheart: níl eilimint amháin ar a laghad ag an réad in 'Imill' le húsáid le haghaidh tomhais. index: values below 1 are not allowed; will be set to 1. innéacs: ní cheadaítear luachanna faoi bhun 1; socrófar iad go 1. Wrong input: index doesn't correspond to an edge in the object. Ionchur mícheart: ní fhreagraíonn an t-innéacs d'imeall sa réad. Wrong input: index doesn't correspond to a circular edge. Ionchur mícheart: ní fhreagraíonn an t-innéacs d'imeall ciorclach. Wrong input: must be a string, 'radius' or 'diameter'. Ionchur mícheart: ní mór gur teaghrán, 'ga' nó 'trastomhas' é. Wrong input: must be a list with two angles. Ionchur mícheart: ní mór liosta le dhá uillinn a bheith ann. Wrong input: must be a number or quantity. Ionchur mícheart: ní mór gur uimhir nó cainníocht í. Layers Sraitheanna Wrong input: it must be a string. Ionchur mícheart: ní mór gur teaghrán é. Wrong input: must be a tuple of three floats 0.0 to 1.0. Ionchur mícheart: ní mór gur tuple de thrí shnámhphointe é ó 0.0 go 1.0. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Ionchur mícheart: ní mór é a bheith 'Soladach', 'Staipthe', 'Poncaithe', nó 'Dashdot'. Wrong input: must be a number between 0 and 100. Ionchur mícheart: ní mór uimhir idir 0 agus 100 a bheith ann. Edit Eagar Flatten Leacaigh Upgrade: Unknown force method: Uasghrádú: Modh fórsa anaithnid: Found 1 block: exploding it Fuarthas 1 bhloc: á phléascadh Found 1 multi-solids compound: exploding it Fuarthas 1 chomhdhúil il-sholaid: á phléascadh Found 1 parametric object: breaking its dependencies Aimsíodh 1 réad paraiméadrach: ag briseadh a spleáchais Downgrade: Unknown force method: Íosghrádú: Modh fórsa anaithnid: Found 1 array: exploding it Aimsíodh 1 eagar: á phléascadh Found 2 objects: subtracting them Fuarthas 2 rud: á ndealú Found several faces: splitting them Fuarthas roinnt aghaidheanna: iad a scoilteadh Found several faces: subtracting them from the first one Fuarthas roinnt aghaidheanna: á mbaint ón gcéad cheann Unable to downgrade these objects Ní féidir na rudaí seo a íosghrádú Found 1 face: extracting its wires Aghaidh amháin aimsithe: ag baint a sreanga amach Found only wires: extracting their edges Ní bhfuarthas ach sreanga: a n-imeall a bhaint amach No object given Níor tugadh aon réad The two points are coincident Tá an dá phointe ag teacht le chéile mirrored scáthánaithe Found 1 solidifiable object: solidifying it Fuarthas 1 réad soladach: á sholadú Found 2 objects: fusing them Aimsíodh 2 rud: á gcomhleá Found groups: closing open wires inside Grúpaí aimsithe: sreanga oscailte á ndúnadh istigh Found meshes: turning them into Part shapes Mogaill aimsithe: iad a thiontú ina gcruthanna Cuid Found object with several coplanar faces: refining them Réad aimsithe le roinnt aghaidheanna comhphlánacha: iad a scagadh Found 1 closed sketch object: creating a face from it Fuarthas 1 réad sceitse dúnta: aghaidh á cruthú uaidh Found closed wires: creating faces Fuarthas sreanga dúnta: aghaidheanna á gcruthú Found several wires or edges: wiring them Fuarthas roinnt sreanga nó imill: iad a shreangú Found several non-treatable objects: creating compound Fuarthas roinnt rudaí nach féidir a chóireáil: cumaisc á cruthú Unable to upgrade these objects Ní féidir na réada seo a uasghrádú Found 1 open wire: closing it Fuarthas sreang oscailte amháin: á dhúnadh Found 1 non-parametric object: replacing it with a Draft object Aimsíodh 1 réad neamhpharaiméadrach: á athsholáthar le réad Dréachta Found points: creating compound Pointí aimsithe: cumaisc á cruthú Text Téacs No Target Gan Sprioc Invalid label type Cineál lipéid neamhbhailí Tag not available for object Níl an clib ar fáil don réad Material not available for object Ábhar nach bhfuil ar fáil don réad Position not available for (sub)object Níl an suíomh ar fáil don (fho)réad Length not available for (sub)object Fad gan fáil don (fho)réad Area not available for (sub)object Limistéar nach bhfuil ar fáil don (fho)réad Volume not available for (sub)object Níl an toirt ar fáil don (fho)réad Opening Multiple Links Oscailt Naisc Iolracha Multiple links found Fuarthas roinnt naisc This may lead to the opening of various windows D’fhéadfadh sé seo go n-osclófaí fuinneoga éagsúla File not found: Comhad gan aimsiú: Opening hyperlink Hipearnasc ag oscailt Select 3 vertices, one or more shapes or an object to define a working plane Roghnaigh 3 bhuaicphointe, cruth amháin nó níos mó nó réad chun plána oibre a shainiú Do you want to update the SVG pattern options of existing objects in all opened documents? Ar mhaith leat roghanna patrún SVG na n-ábhar atá ann cheana féin i ngach doiciméad oscailte a nuashonrú? Sketch is too complex to edit: it is suggested to use the default Sketcher editor Tá an sceitse róchasta le heagarthóireacht: moltar an t-eagarthóir réamhshocraithe Sketcher a úsáid Create layer Cruthaigh sraith Remove From Layer Bain den Chiseal Add to New Layer Cuir le Sraith Nua Remove from layer Bain den tsraith Add to new layer Cuir le sraith nua Add to layer Cuir leis an tsraith Layers change Athraíonn sraitheanna Flip Dimension Toise Smeach Toggle Grid Eangach a Athrú Change Slope Athraigh Fána Select exactly 2 objects, the base object and the path object, before calling this command Roghnaigh 2 réad go díreach, an réad bonn agus an réad cosáin, sula nglaotar an t-ordú seo Create Path Array Cruthaigh Eagar Cosáin Create Path Twisted Array Cruthaigh Eagar Casta Cosáin Select exactly 2 objects, the base object and the point object, before calling this command Roghnaigh 2 réad go díreach, an réad bonn agus an réad pointe, sula nglaotar an t-ordú seo Create Point Array Cruthaigh Eagar Pointe Click anywhere on a line to split it Cliceáil áit ar bith ar líne chun í a roinnt Split Line Líne Scoilte No active Draft toolbar Gan aon bharra uirlisí Dréachta gníomhach Construction Mode Mód Tógála Toggle Display Mode Mód Taispeána a Athrú 2 edges are needed Tá 2 imeall ag teastáil Edges are not connected or radius is too large Níl na himill ceangailte nó tá an ga ró-mhór Unable to build facebinder Ní féidir ceanglóir aghaidhe a thógáil No valid faces for facebinder Gan aon aghaidheanna bailí don cheanglóir aghaidhe Unable to build facebinder, resuming with sew disabled Ní féidir ceanglóir aghaidhe a thógáil, ag atosú agus fuáil díchumasaithe Converting flat B-spline faces of facebinder to planar faces failed Theip ar aghaidheanna comhréidhe B-splíne an cheanglóra aghaidhe a thiontú go haghaidheanna plánacha Activate Layer Gníomhachtaigh an Sraith Reassign Properties of Layer Athshannadh Airíonna na Sraithe Select Layer Contents Roghnaigh Ábhar na Sraithe Add New Layer Cuir Sraith Nua leis Reassign Properties of All Layers Athshann Airíonna na Sraitheanna Uile Merge Layer Duplicates Cumaisc Dúblaigh Sraitheanna The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. Ní bhfuarthas na leabharlanna allmhairithe/onnmhairithe DXF a bhí ag teastáil ó FreeCAD chun an fhormáid DXF a láimhseáil ar an gcóras seo. Lig do FreeCAD na leabharlanna seo a íoslódáil: 1 - Luchtaigh an Binse Oibre Dréachta 2 - Eagarthóireacht Roghchláir → Roghanna → Iompórtáil-Easpórtáil → DXF → Cumasaigh íoslódálacha Nó íoslódáil na leabharlanna seo de láimh, mar a mhínítear ar https://github.com/yorikvanhavre/Draft-dxf-importer Chun FreeCAD a chumasú chun na leabharlanna seo a íoslódáil, freagair Tá. PAT file not found Níor aimsíodh comhad PAT Specified PAT file is not a file Ní comhad é an comhad PAT sonraithe Specified file type is not supported Ní thacaítear leis an gcineál comhaid sonraithe Pattern not found in PAT file Níor aimsíodh patrún sa chomhad PAT Workbench Draft Creation Cruthú Dréachta Draft Annotation Dréacht-Anótáil Draft Modification Dréachtmhodhnú Draft Utility Fóntais Dréachta Draft Snap Draft Snap &Drafting &Dréachtú &Annotation &Anótáil &Modification &Modhnú &Utilities &Fóntais Arc Tools Uirlisí Arc Bézier Tools Uirlisí Bézier Array Tools Uirlisí Eagar Draft Fillet Filléad Delete original objects Scrios réada bunaidh Create chamfer Cruthaigh chamfer Save style Sábháil stíl Name of this new style Ainm an stíl nua seo Warning Warning Name exists. Overwrite? Tá an t-ainm ann. Forscríobh? Error: json module not found. Unable to load style Earráid: modúl json gan aimsiú. Ní féidir stíl a luchtú Error: json module not found. Unable to save style Earráid: modúl json gan aimsiú. Ní féidir an stíl a shábháil Slope Slope True Fíor False Bréagach Scale Scála X-factor Fachtóir X Y-factor Fachtóir Y Z-factor Fachtóir Z Uniform scaling Scálú aonfhoirmeach Copy Cóipeáil Modify subelements Fo-eilimintí a mhodhnú Pick From/To Points Roghnaigh Pointí Ó/Chuig Edit Scale Cuir Scála in Eagar Create a clone Cruthaigh clón _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Dúnta leis an gcéad phointe/deireanach céanna. Níor nuashonraíodh an geoiméadracht. Writing camera position Writing camera position Writing objects shown/hidden state Scríobh rudaí i riocht taispeánta/i bhfolach On Ar Name Ainm Line Width Leithead Líne Draw Style Stíl Tarraingthe Line Color Dath na Líne Face Color Dath Aghaidhe Line Print Color Dath Priontála Líne Transparency Trédhearcacht New Layer Sraith Nua Custom Custom Label Lipéad Position Seasamh Length Fad Area Area Volume Toirt Tag Chlib Material Ábhar Label + Position Lipéad + Suíomh Label + Length Lipéad + Fad Label + Area Lipéad + Limistéar Label + Volume Lipéad + Toirt Label + Material Lipéad + Ábhar Create Clone Cruthaigh Clón Choose a base object before using this command Roghnaigh réad bonn sula n-úsáideann tú an t-ordú seo Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. Níl treo an fhritháireamh sainmhínithe. Bog an luch ar gach taobh den réad ar dtús chun treo a léiriú. Point object does not have a discrete point, it cannot be used for an array Níl pointe discréideach ag réad pointe, ní féidir é a úsáid le haghaidh eagar Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager Theip ar íoslódáil leabharlanna DXF. Suiteáil an breiseán Leabharlann DXF de láimh le do thoil ón roghchlár Uirlisí → Bainisteoir Breiseán importOCA OCA: found no data to export OCA: ní bhfuarthas aon sonraí le honnmhairiú successfully exported easpórtáilte go rathúil ImportAirfoilDAT Did not find enough coordinates Níor aimsíodh go leor comhordanáidí ImportSVG Unknown SVG export style, switching to Translated Stíl easpórtála SVG anaithnid, ag athrú go Aistrithe The export list contains no object with a valid bounding box Níl aon réad le bosca teorann bailí sa liosta easpórtála Draft_Label Label Lipéad Creates a label, optionally attached to a selected object or subelement Cruthaíonn lipéad, atá ceangailte le réad nó fo-eilimint roghnaithe más mian leat Draft_Line Line Líne Creates a 2-point line Cruthaíonn líne 2 phointe Draft_Wire Polyline Polalíne Creates a polyline Cruthaíonn sé polalíne Draft_Hatch Hatch Hatch Creates hatches on the faces of a selected object Cruthaíonn sé haistí ar aghaidheanna réada roghnaithe Draft_Join Join Bígí Linn Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. Ceanglaíonn sé na línte nó na polailínte roghnaithe le chéile in aon réad amháin. Caithfidh pointe coiteann a bheith ag na línte ag an tús nó ag an deireadh. Draft_Text Text Téacs Creates a multi-line annotation Cruthaíonn anótáil il-líne Draft_Move Move Bog Moves the selected objects. If the "Copy" option is active, it creates displaced copies. Bogann sé na réada roghnaithe. Má tá an rogha "Cóipeáil" gníomhach, cruthaíonn sé cóipeanna díláithrithe. Draft_Arc Arc Arc Creates a circular arc from a center point and a radius Cruthaíonn stua ciorclach ó phointe lárnach agus ga Draft_Edit Edit Eagar Edits the active object Cuirtear an réad gníomhach in eagar Draft_Point Point Pointe Creates a point Cruthaíonn pointe Draft_Rotate Rotate Rotate Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. Rothlaíonn sé na réada roghnaithe. Má tá an rogha "Cóipeáil" gníomhach, cruthófar cóipeanna rothlaithe. Draft_Fillet Fillet Filléad Creates a fillet between 2 selected edges Cruthaíonn sé filléad idir 2 imeall roghnaithe Draft_Polygon Polygon Polygon Creates a regular polygon (triangle, square, pentagon…) Cruthaíonn sé polagán rialta (triantán, cearnóg, peinteagán…) Draft_Split Split Scoilt Splits the selected line or polyline at a specified point Scoilteann sé an líne nó an polalíne roghnaithe ag pointe sonraithe Draft_Trimex Trimex Trimex Trims or extends the selected object, or extrudes single faces Bearrtar nó síneann sé an réad roghnaithe, nó easbhrúitear aghaidheanna aonair Draft_Circle Circle Ciorcal Creates a circle (full circular arc) Cruthaíonn sé ciorcal (stua ciorclach iomlán) Draft_Ellipse Ellipse Éilips Creates an ellipse Cruthaíonn sé éilips Draft_Facebinder Facebinder Facebinder Creates a facebinder from the selected faces Cruthaíonn sé ceanglóir aghaidhe ó na haghaidheanna roghnaithe Draft_OrthoArray Array Eagar Creates copies of the selected object in an orthogonal pattern Cruthaíonn sé cóipeanna den réad roghnaithe i bpatrún ortagónach Draft_Scale Scale Scála Scales the selected objects from a base point Scálaíonn na rudaí roghnaithe ó phointe bonn Draft_Layer New Layer Sraith Nua Adds a layer to the document. Objects added to this layer can share the same visual properties. Cuireann sé seo sraith leis an doiciméad. Is féidir leis na hairíonna amhairc céanna a bheith ag réada a chuirtear leis an tsraith seo. Draft_Dimension Dimension Toise Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges Cruthaíonn sé toise líneach le haghaidh imeall díreach, imeall ciorclach, nó 2 phointe roghnaithe, nó toise uilleach le haghaidh 2 imeall díreach Draft_Stretch Stretch Síneadh Stretches the selected objects Síneann sé na rudaí roghnaithe Draft_Rectangle Rectangle Rectangle Creates a 2-point rectangle Cruthaíonn dronuilleog 2 phointe Draft_Mirror Mirror Scáthán Mirrors the selected objects along a line defined by 2 points Scáthánaíonn sé na rudaí roghnaithe feadh líne atá sainmhínithe ag 2 phointe Draft_Clone Clone Clónáil Creates a clone of the selected objects Cruthaíonn sé clón de na réada roghnaithe Draft_Upgrade Upgrade Uasghrádú Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Uasghrádaíonn sé na réada roghnaithe i gcruthanna níos casta. Braitheann toradh na hoibríochta ar na cineálacha réad, a d'fhéadfaí a uasghrádú roinnt uaireanta as a chéile. Mar shampla, is féidir leis na réada roghnaithe a cheangal le chéile in aon cheann amháin, imill shimplí a thiontú ina bpolaílínte paraiméadracha, imill dhúnta a thiontú ina n-aghaidheanna líonta agus ina bpolaigíní paraiméadracha, agus aghaidheanna a chumasc in aon aghaidh amháin. Draft_Offset Offset Fritháireamh Offsets the selected object. It can also create an offset copy of the original object. Fritháireamh an réad roghnaithe. Is féidir leis cóip fhritháireamh den réad bunaidh a chruthú freisin. Draft_Heal Heal Cneasaigh Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. Leigheasann sé réada Dréachta lochtacha a sábháladh le leagan níos luaithe de FreeCAD. Má roghnaítear réad, déanann sé iarracht an réad sin amháin a leigheas, seachas sin déanann sé iarracht gach réad sa doiciméad gníomhach a leigheas. Draft_Downgrade Downgrade Íosghrádú Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. Íslíonn sé na réada roghnaithe go cruthanna níos simplí. Braitheann toradh na hoibríochta ar na cineálacha réad, a d'fhéadfaí a ísliú arís agus arís eile as a chéile. Mar shampla, déantar solad 3T a dhíchóimeáil ina aghaidheanna, sreanga, agus ansin imill ar leithligh. Is féidir aghaidheanna a bhaint freisin. App::Property The placement of the base point of the first line Suíomh phointe bonn na chéad líne The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. An téacs a thaispeántar leis an réad seo. Is liosta teaghrán é; taispeánfar gach eilimint sa liosta ina líne féin. Text string Teaghrán téacs Font file name Ainm comhaid cló Height of text Airde an téacs Horizontal and vertical alignment Ailíniú cothrománach agus ingearach Height reference used for justification Tagairt airde a úsáidtear le haghaidh údarú Keep left margin and leading white space when justification is left Coinnigh an corrlach clé agus an spás bán tosaigh nuair a fhágtar an údarú Scale to ensure cap height is equal to size Scálaigh chun a chinntiú go bhfuil airde an chaipín cothrom leis an méid Inter-character spacing Spásáil idir charachtair Oblique (slant) angle Uillinn chlaonta (fiar) Fill letters with faces Líon na litreacha le haghaidheanna Fuse faces if faces overlap, usually not required (can be very slow) Cuir aghaidheanna le chéile má bhíonn forluí idir aghaidheanna, ní bhíonn gá leis de ghnáth (is féidir go mbeadh sé an-mhall) The base object used by this object An réad bonn a úsáideann an réad seo The PAT file used by this object An comhad PAT a úsáideann an réad seo The pattern name used by this object Ainm an phatrúin a úsáideann an réad seo The pattern scale used by this object An scála patrún a úsáideann an réad seo The pattern rotation used by this object An rothlú patrún a úsáideann an réad seo If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) Má shocraítear go Bréagach, cuirtear an haisteoireacht i bhfeidhm mar atá ar na haghaidheanna, gan aistriúchán (d’fhéadfadh sé seo torthaí míchearta a thabhairt d’aghaidheanna neamh-XY) The objects included in this clone Na réada atá san áireamh sa chlón seo The scale factor of this clone Fachtóir scála an chlóin seo If Clones includes several objects, set True for fusion or False for compound Má tá roinnt réada i gClón, socraigh Fíor le haghaidh comhleá nó Bréagach le haghaidh cumaisc Always create a compound Cruthaigh comhdhúil i gcónaí Start angle of the arc Uillinn tosaigh an stua End angle of the arc (for a full circle, give it same value as First Angle) Uillinn deiridh an stua (i gcás ciorcail iomláin, tabhair an luach céanna dó agus atá ag an gCéad Uillinn) Radius of the circle Ga an chiorcail Create a face Cruthaigh aghaidh The area of this object Achar an réada seo The objects that are part of this layer Na rudaí atá mar chuid den chiseal seo Number of faces Líon na n-aghaidheanna Radius of the control circle Ga an chiorcail rialaithe How the polygon must be drawn from the control circle Conas is gá an polagán a tharraingt ón gciorcal rialaithe Radius to use to fillet the corners Ga le húsáid chun na coirnéil a líonadh Size of the chamfer to give to the corners Méid an chamfer le tabhairt do na coirnéil The base object that will be duplicated. An réad bonn a dhúblófar. The object along which the copies will be distributed. It must contain 'Edges'. An réad ar a ndáilfear na cóipeanna. Caithfidh 'Imill' a bheith ann. Number of copies to create. Líon na gcóipeanna le cruthú. Rotation factor of the twisted array. Fachtóir rothlaithe an eagair casta. Show the individual array elements (only for Link arrays) Taispeáin na heilimintí eagar aonair (i gcás eagar Nasc amháin) The placement for each array element An socrúchán do gach eilimint eagar The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. Suíomh bharr na líne ceannaire. Is féidir an pointe seo a mhaisiú le saighead nó le siombail eile. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. Réad, agus fo-eilimint más mian leat, a thaispeánfar a airíonna mar 'Téacs', ag brath ar 'Chineál Lipéid'. Ní úsáidfear 'Sprioc' má shocraítear 'Cineál Lipéid' go 'Saincheaptha'. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. An liosta pointí a shainmhíníonn an líne ceannaire; liosta de thrí phointe de ghnáth. Ba chóir gurb é an chéad phointe suíomh an téacs, is é sin, an 'Suíomh', agus ba chóir gurb é an pointe deireanach barr na líne, is é sin, an 'Pointe Sprioc'. Ríomhtar an pointe lár go huathoibríoch ag brath ar an 'Treo Díreach' roghnaithe agus luach agus comhartha an 'Fad Díreach'. Má shocraítear 'Treo Díreach' go 'Saincheaptha', is féidir an mhaoin 'Pointí' a shocrú mar liosta pointí treallacha. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. Treo na coda dírí den líne ceannaire. Má roghnaítear 'Saincheaptha', is féidir pointí an cheannaire a shonrú trí liosta saincheaptha a shannadh don tréith 'Pointí'. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. Fad na coda dírí den líne ceannaire. Is fad treoshuímh é seo; má tá sé diúltach, tarraingeofar an líne ar chlé nó faoin 'Téacs', ar dheis nó os a chionn, ag brath ar luach 'Treo Díreach'. The placement of the 'Text' element in 3D space Suíomh an eilimint 'Téacs' sa spás 3T The text to display when 'Label Type' is set to 'Custom' An téacs le taispeáint nuair a shocraítear 'Cineál Lipéid' go 'Saincheaptha' The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. An téacs a thaispeántar leis an lipéad seo. Is maoin léite amháin í seo, toisc go mbraitheann an téacs deiridh ar 'Cineál Lipéid', agus an réad atá sainmhínithe i 'Sprioc'. Ní thaispeántar an 'Téacs Saincheaptha' ach amháin má tá 'Cineál Lipéid' socraithe go 'Saincheaptha'. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like BIM objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. An cineál faisnéise a thaispeántar leis an lipéad seo. Má roghnaítear 'Saincheaptha', úsáidfear ábhar 'Téacs Saincheaptha'. I gcás cineálacha eile, ríomhfar an teaghrán go huathoibríoch ón réad atá sainmhínithe i 'Sprioc'. Ní oibríonn 'Clib' agus 'Ábhar' ach amháin le haghaidh réada a bhfuil na hairíonna seo acu, cosúil le réada BIM. I gcás 'Suíomh', 'Fad', agus 'Achar', bainfear na hairíonna seo ón bpríomhréad i 'Sprioc', nó ón bhfo-eilimint 'VertexN', 'EdgeN', nó 'FaceN', faoi seach, má shonraítear é. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. Fachtóir scálúcháin ginearálta a mbíonn tionchar comhsheasmhach aige ar an nóta toisc go ndéanann sé an téacs, agus na maisiúcháin líne, más ann dóibh, a scálú, sa chomhréir chéanna. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. Stíl anótála le cur i bhfeidhm ar an réad seo. Agus stíl shábháilte á húsáid, beidh cuid de na hairíonna radhairc inléite amháin; ní bheidh siad in-eagarthóireacht ach tríd an stíl a athrú tríd an uirlis 'Eagarthóir stíl anótála'. The base object that will be duplicated An réad bunúsach a dhúblófar List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. Liosta d'imeall ceangailte sa 'Réad Cosáin'. Má tá siad seo i láthair, cruthófar na cóipeanna feadh na bhfo-eilimintí seo amháin. Fág an mhaoin seo folamh chun cóipeanna a chruthú feadh an 'Réad Cosáin' ar fad. Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode Éirigh úsáid 'Veicteoir Ingearach' mar threo Z áitiúil agus mód ailínithe 'Bunaidh' nó 'Tadhlaí' in úsáid Number of copies to create Líon na gcóipeanna le cruthú Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Aistriúchán breise a chuirfear i bhfeidhm ar gach cóip. Tá sé seo úsáideach chun an difríocht idir lár an chrutha agus pointe tagartha an chrutha a choigeartú. Alignment vector for 'Tangent' mode Veicteoir ailínithe don mhodh 'Tangent' Direction of the local Z axis when 'Force Vertical' is true Treo an ais Z áitiúil nuair a bhíonn 'Fórsa Ingearach' fíor Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Modh chun na cóipeanna a threorú feadh an chosáin. - Bunleagan: Is é X tadhlaí cuar, is é Y gnáthleagan, agus is é Z an trastháirge. - Frenet: ailíníonn sé an réad ag leanúint an chórais chomhordanáidí áitiúil feadh an chosáin. - Tadhlaí: cosúil le 'Bunleagan' ach tá an ais X áitiúil réamh-ailínithe le 'Veicteoir Tadhlaí'. Chun torthaí níos fearr a fháil le 'Bunleagan' nó 'Tadhlaí', b'fhéidir go mbeidh ort 'Fórsáil Ingearach' a shocrú go fíor. Walk the path backwards. Siúil an cosán ar gcúl. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. Conas a spásáiltear cóipeanna. - Líon seasta: roinntear fad na cosáin atá ar fáil (lúide na fritháireamh tosaigh agus deiridh) go cothrom ina n. - Spásáil sheasta: tosaigh ag "Fritháireamh tosaigh" agus cuir cóipeanna nua i bhfeidhm tar éis achar seasta a thaisteal feadh na cosáin. - Líon agus spásáil sheasta: mar an gcéanna le "Spásáil sheasta", ach stopann sé freisin ag líon áirithe cóipeanna. Base fixed distance between elements. Fad socraithe idir eilimintí. Use repeating spacing patterns instead of uniform spacing. Bain úsáid as patrúin spásála athchleachtacha in ionad spásáil aonfhoirmeach. Spacing is multiplied by a corresponding number in this sequence. Déantar an spásáil a iolrú faoi uimhir chomhfhreagrach sa seicheamh seo. Length from the start of the path to the first copy. Fad ó thús an chosáin go dtí an chéad chóip. Length from the end of the path to the last copy. Fad ó dheireadh na cosáin go dtí an chóip dheireanach. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. Treoshuigh na cóipeanna feadh an chosáin ag brath ar an 'Mód Ailínithe'. Seachas sin beidh an treoshuíomh céanna ag na cóipeanna leis an réad Bunúsach bunaidh. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. An cineál eagair atá le cruthú. - Ortho: cuireann sé na cóipeanna i dtreo na n-aiseanna domhanda X, Y, Z. - Polar: cuireann sé na cóipeanna feadh stua ciorclach, suas go dtí uillinn shonraithe, agus le treoshuíomh áirithe atá sainmhínithe ag lár agus ais. - Ciorclach: cuireann sé na cóipeanna i gciorcail chomhlárnacha timpeall an réada bhunúsaigh. Specifies if the copies should be fused together if they touch each other (slower) Sonraíonn sé seo an gcaithfear na cóipeanna a chumasc le chéile má bhíonn siad i dteagmháil lena chéile (níos moille) Number of copies in X-direction Líon na gcóipeanna i dtreo-X Number of copies in Y-direction Líon na gcóipeanna i dtreo-Y Number of copies in Z-direction Líon na gcóipeanna i dtreo Z Distance and orientation of intervals in X-direction Fad agus treoshuíomh eatraimh i dtreo-X Distance and orientation of intervals in Y-direction Fad agus treoshuíomh eatraimh i dtreo-Y Distance and orientation of intervals in Z-direction Fad agus treoshuíomh eatraimh i dtreo Z The axis direction around which the elements in a polar or a circular array will be created Treo an ais timpeall a gcruthófar na heilimintí i sraith pholarach nó chiorclach Center point for polar and circular arrays. The 'Axis' passes through this point. Lárphointe do eagair pholacha agus chiorclacha. Téann an 'Ais' tríd an bpointe seo. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. An réad ais a sháraíonn luach 'Ais' agus 'Lár', mar shampla, líne sonraí. Úsáidfear a shuíomh, a shuíomh agus a rothlú agus eagair pholacha agus chiorclacha á gcruthú. Fág an mhaoin seo folamh le bheith in ann 'Ais' agus 'Lár' a shocrú de láimh. Number of copies in the polar direction Líon na gcóipeanna sa treo polach Distance and orientation of intervals in 'Axis' direction Fad agus treoshuíomh eatraimh i dtreo 'Ais' Angle to cover with copies Uillinn le clúdach le cóipeanna Distance between concentric circles Fad idir ciorcail chomhlárnacha Distance between copies in the same circle Fad idir cóipeanna sa chiorcal céanna Number of concentric circle. The 'Base' object counts as one circle. Líon na gciorcal comhlárnach. Comhairtear an réad 'Bonn' mar chiorcal amháin. A parameter that determines how many symmetry planes the circular array will have Paraiméadar a chinneann cé mhéad plána siméadrachta a bheidh san eagar ciorclach Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Líon iomlán na n-eilimintí san eagar. Is maoin léite amháin í seo, toisc go mbraitheann an líon ar pharaiméadair an eagar. Base object that will be duplicated Réad bonn a dhúblófar Object containing points used to distribute the copies. Réad ina bhfuil pointí a úsáidtear chun na cóipeanna a dháileadh. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Líon na gcóipeanna san eagar. Is maoin léite amháin í seo, toisc go mbraitheann an líon ar na pointí i 'Point Object'. Additional placement, shift and rotation, that will be applied to each copy Socrú, aistriú agus rothlú breise, a chuirfear i bhfeidhm ar gach cóip The base object this 2D view must represent An réad bonn a chaithfidh an radharc 2T seo a léiriú The projection vector of this object Veicteoir teilgean an réada seo The way the viewed object must be projected An chaoi a gcaithfear an réad a fheictear a theilgean The indices of the faces to be projected in Individual Faces mode Innéacsanna na n-aghaidheanna atá le teilgean i mód Aghaidheanna Aonair Show hidden lines Taispeáin línte i bhfolach Fuse wall and structure objects of same type and material Cuir balla agus réada struchtúir den chineál agus den ábhar céanna le chéile Tessellate Ellipses and B-splines into line segments Tessellate Eilipsí agus B-splíní i mírlínte For Cutlines and Cutfaces modes, this leaves the faces at the cut location I gcás na modhanna Gearrlínte agus Aghaidheanna Gearrtha, fágann sé seo na haghaidheanna ag an suíomh gearrtha Length of line segments if tessellating Ellipses or B-splines into line segments Fad na ndeighleogán líne má dhéantar eilipsí nó splíní-B a theasailéadú i ndeighleoga líne If this is True, this object will include only visible objects Más fíor é seo, ní bheidh ach rudaí infheicthe san áireamh sa réad seo A list of exclusion points. Any edge touching any of those points will not be drawn. Liosta pointí eisiaimh. Ní tharraingeofar aon imeall a bhaineann le haon cheann de na pointí sin. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. Liosta d'ainmneacha réad eisiaimh. Ní tharraingeofar aon réad a fheictear a mheaitseálann ainm ón liosta. If this is True, only solid geometry is handled. This overrides the base object's Only Solids property Más fíor é seo, ní láimhseálfar ach geoiméadracht sholadach. Sáraíonn sé seo airí Solaid Amháin an réada bhunúsaigh If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property Más fíor é seo, gearrtar an t-ábhar go dtí teorainneacha an eitleáin rannóige, más infheidhme. Sáraíonn sé seo airí Gearr an réada bhunúsaigh This object will be recomputed only if this is True. Ní athríomhfar an réad seo ach amháin má tá sé seo Fíor. The points of the Bezier curve Pointí cuar Bezier The degree of the Bezier function Céim na feidhme Bezier Continuity Leanúnachas If the Bezier curve should be closed or not Ar cheart cuar Bezier a dhúnadh nó nach ea Create a face if this curve is closed Cruthaigh aghaidh má tá an cuar seo dúnta The length of this object Fad an réada seo The placement of this object Suíomh an réada seo X Location Suíomh X Y Location Suíomh Y Z Location Suíomh Z Start angle of the elliptical arc Uillinn tosaigh an stua éilipseach End angle of the elliptical arc (for a full circle, give it same value as First Angle) Uillinn deiridh an stua éilipseach (i gcás ciorcail iomláin, tabhair an luach céanna dó agus atá ag an gCéad Uillinn) Minor radius of the ellipse Ga beag an éilips Major radius of the ellipse Ga mór an éilips Area of this object Limistéar an réada seo The start point of this line. Pointe tosaigh na líne seo. The end point of this line. Deireadhphointe na líne seo. The length of this line. Fad na líne seo. Radius to use to fillet the corner. Ga le húsáid chun an chúinne a líonadh. The normal direction of the text of the dimension Treo gnáth téacs an toise The object measured by this dimension An réad a thomhaistear leis an toise seo The object, and specific subelements of it, that this dimension is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. An réad, agus fo-eilimintí sonracha de, atá á thomhas ag an toise seo. Tá féidearthachtaí éagsúla ann: - Réad, agus ceann dá imill. - Réad, agus dhá cheann dá bhuaicphointí. - Réad stua, agus a imeall. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. Pointe trína rachaidh an líne thoise, nó easpórtáil di. - I gcás toisí líneacha, rialaíonn an mhaoin seo cé chomh gar is atá an líne thoise don réad tomhaiste. - I gcás toisí gathacha, rialaíonn sé seo treo na líne thoise a thaispeánann an ga nó an trastomhas tomhaiste. - I gcás toisí uilleacha, rialaíonn sé seo ga an stua thoise a thaispeánann an uillinn tomhaiste. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Pointe tosaigh na líne toise. Más toise ga í, is é lár an áirse a bheidh ann. Más toise trastomhais a bheidh ann, is pointe atá suite ar an áirse a bheidh ann. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. Pointe deiridh na líne toise. Más toise ga nó trastomhais atá ann, beidh sé ina phointe atá suite ar an stua. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. Treo na líne toise. Má fhanann sé seo '(0,0,0)', ríomhfar an treo go huathoibríoch. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. Luach an tomhais. Is féidir an mhaoin seo a léamh amháin mar go ríomhtar an luach ó na hairíonna 'Tosaigh' agus 'Deireadh'. Más stua nó ciorcal atá sa 'Geoiméadracht Nasctha', is é an 'Fad' seo an ga nó an trastomhas, ag brath ar an mhaoin 'Trastomhas'. When measuring circular arcs, it determines whether to display the radius or the diameter value Agus stuaic chiorclacha á dtomhas, cinneann sé an luach ga nó trastomhais a thaispeáint Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Uillinn tosaigh na líne toise (stua ciorclach). Tarraingítear an stua tuathal. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Uillinn deiridh na líne toise (stua ciorclach). Tarraingítear an stua tuathal. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. Lárphointe na líne toise, ar stua ciorclach é. De ghnáth, is é seo an pointe ina dtrasnaíonn dhá mhírlíne, nó a síntí, a chéile, rud a fhágann go bhfuil an 'Uillinn' tomhaiste eatarthu. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. Luach an tomhais. Is maoin léite amháin í seo mar go ríomhtar an luach ó na hairíonna 'An Chéad Uillinn' agus 'An Uillinn Dheiridh'. Length of the rectangle Fad an dronuilleog Height of the rectangle Airde an dronuilleog Horizontal subdivisions of this rectangle Fo-roinnteanna cothrománacha an dronuilleog seo Vertical subdivisions of this rectangle Fo-ranna ingearacha an dronuilleog seo Linked faces Aghaidheanna nasctha Specifies if splitter lines must be removed Sonraíonn an gá línte scoilteora a bhaint An optional extrusion value to be applied to all faces Luach easbhrúite roghnach le cur i bhfeidhm ar gach aghaidh An optional offset value to be applied to all faces Luach fritháireamh roghnach le cur i bhfeidhm ar gach aghaidh This specifies if the shapes sew Sonraíonn sé seo an bhfuil na cruthanna ag fuáil The area of the faces of this Facebinder Achar aghaidheanna an Cheanglóra Aghaidhe seo The components of this block Comhpháirteanna an bhloic seo The vertices of the wire Buaicphointí na sreinge If the wire is closed or not Más rud é go bhfuil an sreang dúnta nó nach bhfuil The base object is the wire, it's formed from 2 objects Is é an sreang an réad bunúsach, tá sé déanta as dhá réad The tool object is the wire, it's formed from 2 objects Is é an sreang an réad uirlise, tá sé déanta as dhá réad The start point of this line Pointe tosaigh na líne seo The end point of this line Deireadhphointe na líne seo The length of this line Fad na líne seo Create a face if this object is closed Cruthaigh aghaidh má tá an réad seo dúnta The number of subdivisions of each edge Líon na bhfo-roinnte de gach imeall The points of the B-spline Pointí an B-splíne If the B-spline is closed or not Más rud é go bhfuil an B-spline dúnta nó nach bhfuil Create a face if this B-spline is closed Cruthaigh aghaidh má tá an B-splíne seo dúnta Parameterization factor Fachtóir paraiméadairithe Force sync pattern placements even when array elements are expanded Cuirtear socruithe patrún sioncrónaithe i bhfeidhm fiú nuair a leathnaítear eilimintí eagar Show the individual array elements Taispeáin na heilimintí eagar aonair Text color Dath an téacs Line spacing (relative to font size) Spásáil líne (i gcoibhneas le méid an chló) Vertical alignment Ailíniú ingearach Maximum number of characters on each line of the text box Uasmhéid na gcarachtar ar gach líne den bhosca téacs Horizontal alignment Ailíniú cothrománach The type of frame around the text of this object An cineál fráma timpeall téacs an réada seo Display a leader line or not Taispeáin líne ceannaire nó ná taispeáin Line width Line width Line color Line color Defines an SVG pattern. Sainmhíníonn sé patrún SVG. Defines the size of the SVG pattern. Sainmhíníonn sé méid an phatrúin SVG. If it is true, the objects contained within this layer will adopt the line color of the layer Más fíor é, glacfaidh na rudaí atá sa tsraith seo dath líne na sraithe If it is true, the objects contained within this layer will adopt the shape appearance of the layer Más fíor é, glacfaidh na rudaí atá sa tsraith seo cruth na sraithe If it is true, the print color will be used when objects in this layer are placed on a TechDraw page Más fíor é, úsáidfear an dath priontála nuair a chuirtear réada sa chiseal seo ar leathanach TechDraw The line color of the objects contained within this layer Dath líne na n-ábhar atá sa tsraith seo The shape color of the objects contained within this layer Dath cruth na n-ábhar atá sa tsraith seo The shape appearance of the objects contained within this layer Cruth na réad atá sa chiseal seo The line width of the objects contained within this layer Leithead líne na réad atá sa tsraith seo The draw style of the objects contained within this layer Stíl tarraingthe na réad atá sa tsraith seo The transparency of the objects contained within this layer Trédhearcacht na n-ábhar atá sa tsraith seo The line color of the objects contained within this layer, when used on a TechDraw page Dath líne na n-ábhar atá sa chiseal seo, nuair a úsáidtear é ar leathanach TechDraw Font name Ainm cló Font size Méid cló Spacing between text and dimension line Spásáil idir téacs agus líne thoise Rotate the dimension text 180 degrees Rothlaigh an téacs toise 180 céim Text Position. Leave '(0,0,0)' for automatic position Suíomh Téacs. Fág '(0,0,0)' le haghaidh suíomh uathoibríoch Text override. Write '$dim' so that it is replaced by the dimension length. Sárú téacs. Scríobh '$dim' ionas go gcuirfear fad na toise ina áit. The number of decimals to show Líon na ndeachúlacha le taispeáint Show the unit suffix Show the unit suffix A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation Aonad chun an tomhas a chur in iúl. Fág bán le haghaidh réamhshocrú an chórais. Úsáid 'arch' chun nótaíocht arch SAM a fhorchur Arrow size Méid na saighe Arrow type Cineál saighead Rotate the dimension arrows 180 degrees Rothlaigh na saigheada toise 180 céim The distance the dimension line is extended past the extension lines An fad a shíntear an líne thoise thar na línte síneadh Length of the extension lines Fad na línte síneadh Length of the extension line beyond the dimension line Fad na líne síneadh thar an líne toise Shows the dimension line and arrows Taispeánann sé an líne thoise agus na saigheada The display length of this section plane The display length of this section plane The size of the arrows of this section plane The size of the arrows of this section plane Defines a texture image (overrides hatch patterns) Sainmhíníonn íomhá uigeachta (sáraíonn patrúin hata) Command Transform Claochlú QObject Draft Dréacht Import-Export Iompórtáil-Easpórtáil Draft_AnnotationStyleEditor Annotation Styles Stíleanna Anótála Opens an editor to manage or create annotation styles Osclaíonn sé eagarthóir chun stíleanna anótála a bhainistiú nó a chruthú Draft_Arc_3Points Arc From 3 Points Arc ó 3 Phointe Creates a circular arc from 3 points Cruthaíonn sé stua ciorclach ó 3 phointe Draft_ArcTools Arc Tools Uirlisí Arc Tools to create various types of circular arcs Uirlisí chun cineálacha éagsúla stua ciorclacha a chruthú Draft_ArrayTools Array Tools Uirlisí Eagar Tools to create various types of arrays, including rectangular, polar, circular, path, and point arrays Uirlisí chun cineálacha éagsúla eagair a chruthú, lena n-áirítear eagair dronuilleogacha, polacha, ciorclacha, cosáin agus phointe Draft_BezCurve Bézier Curve Cuar Bézier Creates an n-degree Bézier curve. The more points, the higher the degree. Cruthaíonn sé cuar Bézier n-chéim. Dá mhéad pointí, is airde an chéim. Draft_CubicBezCurve Cubic Bézier Curve Cuar Bézier Ciúbach Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments. Control points and properties of each knot can be edited after creation. Cruthaíonn sé cuar Bézier déanta as codanna den 2ú céim (cearnach) agus den 3ú céim (ciúbach). Trí chliceáil agus tarraingt is féidir codanna a shainiú. Is féidir pointí rialaithe agus airíonna gach snaidhme a chur in eagar tar éis a chruthú. Draft_BezierTools Bézier Tools Uirlisí Bézier Tools to create various types of Bézier curves Uirlisí chun cineálacha éagsúla cuar Bézier a chruthú Draft_CircularArray Circular Array Eagar Ciorclach Creates copies of the selected object in a radial pattern with 1 or more circular layers Cruthaíonn sé cóipeanna den réad roghnaithe i bpatrún gathach le sraith chiorclach amháin nó níos mó Draft_FlipDimension Flip Dimension Toise Smeach Flips the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Casann sé treo gnáth na dtoisí roghnaithe (líneach, gathach, uilleach). Má roghnaítear réada eile, déantar neamhaird díobh. Draft_Draft2Sketch Draft to Sketch Dréacht go Sceitse Converts bidirectionally between Draft objects and sketches. Multiple selected Draft objects are converted into a single sketch. However, a single sketch with disconnected traces is converted into several individual Draft objects. Déanann sé seo a thiontú go déthreoch idir réada Dréachta agus sceitsí. Déantar ilréada Dréachta roghnaithe a thiontú ina sceitse aonair. Mar sin féin, déantar sceitse aonair le rianta scoite a thiontú ina roinnt réada Dréachta aonair. Draft_ToggleGrid Toggle Grid Eangach a Athrú Toggles the visibility of the Draft grid Athraíonn sé infheictheacht an eangaigh Dréachta Draft_AddToGroup Add to Group Cuir leis an nGrúpa Adds selected objects to a group, or removes them from any group Cuireann sé rudaí roghnaithe le grúpa, nó baintear iad as aon ghrúpa Draft_SelectGroup Select Group Roghnaigh Grúpa Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. Roghnaíonn sé seo ábhar na ngrúpaí roghnaithe. I gcás réada nach grúpaí iad, roghnaítear ábhar an ghrúpa ina bhfuil siad. Draft_AutoGroup Auto-Group Uathghrúpáil Adds new Draft and BIM objects to the selected layer or group Cuireann sé réada Dréachta agus BIM nua leis an tsraith nó leis an ngrúpa roghnaithe Draft_AddConstruction Add to Construction Group Cuir leis an nGrúpa Tógála Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it does not exist. Cuireann sé na réada roghnaithe leis an ngrúpa tógála, agus athraíonn sé a gcuma go dtí an stíl tógála. Cruthaítear an grúpa tógála mura bhfuil sé ann. Draft_AddNamedGroup New Named Group Grúpa Ainmnithe Nua Adds a group with a given name Cuireann grúpa leis le hainm tugtha Draft_Hyperlink Open Links Oscail Naisc Opens linked documents Osclaíonn doiciméid nasctha Draft_AddToLayer Add to Layer Cuir le Sraith Adds selected objects to a layer, or removes them from any layer Cuireann sé rudaí roghnaithe le sraith, nó baintear iad as aon tsraith Draft_LayerManager Manage Layers Manage Layers Allows to modify the layers Ceadaíonn sé na sraitheanna a mhodhnú Draft_Slope Set Slope Socraigh Fána Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn on the XY-plane. Socraíonn sé fána na líne roghnaithe trí luach Z ceann dá pointí a athrú. Má roghnaítear polalíne, cuirfidh sé an claochlú fána i bhfeidhm ar gach ceann dá dheighleoga. Athróidh an fána an luach Z i gcónaí, dá bhrí sin ní oibríonn an t-ordú seo go maith ach amháin le haghaidh línte dréachta díreacha atá tarraingthe ar an eitleán XY. Draft_PathArray Path Array Eagar Cosáin Creates copies of the selected object along a selected path Cruthaíonn cóipeanna den réad roghnaithe feadh conair roghnaithe Draft_PathLinkArray Path Link Array Eagar Nasc Cosáin Creates linked copies of the selected object along a selected path Cruthaíonn cóipeanna nasctha den réad roghnaithe feadh conair roghnaithe Draft_PathTwistedArray Twisted Path Array Eagar Cosáin Chasta Creates twisted copies of the selected object along a selected path Cruthaíonn cóipeanna casta den réad roghnaithe feadh conair roghnaithe Draft_PathTwistedLinkArray Twisted Path Link Array Eagar Nasc Cosáin Chasta Creates twisted linked copies of the selected object along a selected path Cruthaíonn cóipeanna nasctha casta den réad roghnaithe feadh an chosáin roghnaithe Draft_WorkingPlaneProxy Working Plane Proxy Seachfhreastalaí Eitleáin Oibre Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objects Cruthaíonn sé réad seachfhreastalaí ón eitleán oibre reatha a ligeann duit suíomh an cheamara agus infheictheacht réad a athbhunú Draft_PointArray Point Array Eagar Pointe Creates copies of the selected object at the points of a point object Cruthaíonn sé cóipeanna den réad roghnaithe ag pointí réada pointe Draft_PointLinkArray Point Link Array Eagar Nasc Pointe Creates linked copies of the selected object at the points of a point object Cruthaíonn sé cóipeanna nasctha den réad roghnaithe ag pointí réada pointe Draft_PolarArray Polar Array Eagar Polar Creates copies of the selected object in a polar pattern Cruthaíonn cóipeanna den réad roghnaithe i bpatrún polar Draft_SelectPlane Working Plane Plána Oibre Defines the working plane from 3 vertices, 1 or more shapes, or an object Sainmhíníonn sé an plána oibre ó 3 bhuaicphointe, 1 chruth nó níos mó, nó réad Draft_SetStyle Set Style Socraigh Stíl Sets the default style and can apply the style to objects Socraíonn sé an stíl réamhshocraithe agus is féidir an stíl a chur i bhfeidhm ar réada Draft_Shape2DView Shape 2D View Cruth Radharc 2T Creates a 2D projection of the selected objects on the XY-plane. The initial projection direction is the opposite of the current active view direction. Cruthaíonn sé teilgean 2T de na réada roghnaithe ar an eitleán XY. Tá treo teilgean tosaigh os coinne threo an radhairc ghníomhaigh reatha. Draft_ShapeString Shape From Text Cruth ó Théacs Creates a shape from a text string and a specified font Cruthaíonn cruth ó shreangán téacs agus cló sonraithe Draft_Snap_Lock Snap Lock Glas Snap Enables or disables snapping globally Cumasaíonn nó díchumasaíonn snapping go domhanda Draft_Snap_Midpoint Snap Midpoint Lárphointe Snap Snaps to the midpoint of edges Snapálann sé go lárphointe na n-imeall Draft_Snap_Perpendicular Snap Perpendicular Snap Ingearach Snaps to the perpendicular points on faces and edges Snapálann sé chuig na pointí ingearacha ar aghaidheanna agus imill Draft_Snap_Grid Snap Grid Greille Snap Snaps to the intersections of grid lines Snaipeálann sé chuig trasnaíochtaí línte greille Draft_Snap_Intersection Snap Intersection Trasnú Snap Snaps to the intersection of 2 edges, and the intersection of a face and an edge Snapálann sé go dtí trasnú 2 imeall, agus trasnú aghaidhe agus imeall Draft_Snap_Parallel Snap Parallel Snapáil Comhthreomhar Snaps to an imaginary line parallel to straight edges Snapálann sé go líne shamhailteach comhthreomhar le himill dhíreacha Draft_Snap_Endpoint Snap Endpoint Deireadhphointe Snap Snaps to the endpoints of edges Snapálann sé go dtí foircinn na n-imeall Draft_Snap_Angle Snap Angle Uillinn Snap Snaps to the special cardinal points on circular edges, at multiples of 30° and 45° Snapálann sé chuig na pointí cardinal speisialta ar imill chiorclacha, ag iolraithe de 30° agus 45° Draft_Snap_Center Snap Center Ionad Snap Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building parts Snapálann sé go dtí an pointe lárnach d’aghaidheanna agus d’imeall ciorclacha, agus go dtí an pointe socrúcháin d’ionadaithe eitleáin oibre agus do chodanna foirgnimh Draft_Snap_Extension Snap Extension Síneadh Snap Snaps to an imaginary line that extends beyond the endpoints of straight edges Snapálann sé chuig líne shamhailteach a shíneann thar chríochphointí imill dhíreacha Draft_Snap_Near Snap Near Snap In Aice Snaps to the nearest point on faces and edges Snapálann sé go dtí an pointe is gaire ar aghaidheanna agus imill Draft_Snap_Ortho Snap Ortho Snap Ortho Snaps to imaginary lines that cross the previous point at multiples of 45° Snapálann sé chuig línte samhailteacha a thrasnaíonn an pointe roimhe sin ag iolraithe de 45° Draft_Snap_Special Snap Special Snap Speisialta Snaps to special points defined by the object Snapálann sé chuig pointí speisialta atá sainmhínithe ag an réad Draft_Snap_Dimensions Snap Dimensions Toisí Snap Shows temporary X and Y dimensions Taispeánann toisí sealadacha X agus Y Draft_Snap_WorkingPlane Snap Working Plane Snap Work Plane Projects snap points onto the current working plane Snapálann tionscadail pointí ar an eitleán oibre reatha Draft_ShowSnapBar Show Snap Toolbar Taispeáin an Barra Uirlisí Snap Shows the snap toolbar if it is hidden Taispeánann an barra uirlisí snap má tá sé i bhfolach Draft_BSpline B-Spline B-Splíne Creates a multiple-point B-spline Cruthaíonn splíne B ilphointe Draft_ApplyStyle Apply Current Style Cuir an Stíl Reatha i bhFeidhm Applies the current style to the selected objects and groups Cuireann sé an stíl reatha i bhfeidhm ar na réada agus na grúpaí roghnaithe Draft_SubelementHighlight Highlight Subelements Aibhsigh Fo-eilimintí Highlights the subelements of the selected objects, to be able to move, rotate, and scale them Aibhsíonn sé fo-eilimintí na réada roghnaithe, le go mbeidh sé in ann iad a bhogadh, a rothlú agus a scálú Draft_ToggleConstructionMode Toggle Construction Mode Mód Tógála a Athrú Toggles the construction mode Athraíonn an modh tógála Draft_ToggleDisplayMode Toggle Wireframe Sreangfhráma a Athrú Switches the view style of the selected objects from Flat Lines to Wireframe and back Athraíonn sé stíl radhairc na n-ábhar roghnaithe ó Línte Cothroma go Sreangfhráma agus ar ais Draft_WireToBSpline Convert Wire/B-Spline Tiontaigh Sreang/B-Splíne Converts the selected polyline to a B-spline, or the selected B-spline to a polyline Tiontaíonn sé an polalíne roghnaithe go B-splíne, nó an B-splíne roghnaithe go polalíne DxfImportDialog DXF Import Iompórtáil DXF Import As Iompórtáil Mar Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Cruthaíonn sé réada Dréachta lánpharaiméadracha. Iompórtáiltear sainmhínithe bloc mar réada in-athúsáidte (Comhdhúile Cuid) agus bíonn samplaí ina réada `App::Link`, ag cothabháil struchtúr na mbloc. Is fearr é le haghaidh comhtháthú iomlán leis an mbinse oibre Dréachta. Editable Draft objects Réada Dréachta In-eagarthóireachta Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing. Cruthaíonn sé réada Cuid paraiméadracha (m.sh., Cuid::Líne, Cuid::Ciorcal). Iompórtáiltear sainmhínithe bloic mar réada in-athúsáidte (Comhdhúile Cuid) agus bíonn samplaí ina réada `App::Link`, ag coinneáil struchtúr na mbloc. Is fearr le haghaidh iarphróiseála bunaithe ar scripteanna. Editable Part primitives Bunphrionsabail Chuid In-Eagarthóireachta Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Cruthaíonn sé cruth neamhpharaiméadrach do gach eintiteas DXF. Déantar sainmhínithe bloc a allmhairiú mar réada in-athúsáidte (Comhdhúile Cuid) agus bíonn samplaí ina réada `App::Link`, ag coinneáil struchtúr na mbloc. Go maith le haghaidh tagartha agus tomhais. Individual Part shapes (recommended) Cruthanna Páirteanna Aonair (molta) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for viewing very large files with maximum performance. Cuireann sé seo gach geoiméadracht in aghaidh an tsraithe le chéile i gcruth aonair nach féidir a chur in eagar. Ní choimeádtar struchtúir bhloc; bíonn a ngeiméadracht mar chuid de chruth an tsraithe. Is fearr é seo chun comhaid an-mhóra a fheiceáil leis an bhfeidhmíocht is mó. Fused Part shapes (fastest) Cruthanna Cuid Chomhleáite (is tapúla) File summary Achoimre ar chomhad Warning Warning Do not show this dialog again Ná taispeáin an dialóg seo arís