Dialog Annotation Styles Editor Επεξεργαστής Στυλ Σημείωσης Renames the selected style Μετονομάζει το επιλεγμένο στυλ Rename Μετονομασία Deletes the selected style Διαγράφει το επιλεγμένο στυλ New Νέο Delete Διαγραφή Layers Manager Διαχειριστής Επιπέδων Select All Επιλογή Όλων Toggle Visibility Εναλλαγή Ορατότητας Isolate Απομόνωση Cancel Ακύρωση OK ΟΚ Import styles from json file Εισαγωγή στυλ από το αρχείο json Export styles to json file Εξαγωγή στυλ σε αρχείο json The font to use for texts and dimensions Η γραμματοσειρά για χρήση σε κείμενα και διαστάσεις Font name Όνομα γραμματοσειράς The font size in system units Το μέγεθος τις γραμματοσειράς σε μονάδες συστήματος The width of the lines Το πλάτος των γραμμών px px The color of lines and arrows Το χρώμα των γραμμών και των βελών Line and arrow color Χρώμα γραμμής και βέλους The distance the dimension line is additionally extended Η απόσταση κατά την οποία επεκτείνεται επιπλέον η γραμμή διάστασης Dimension line overshoot Υπέρβαση γραμμής διάστασης Extension line length Μήκος γραμμής επέκτασης The distance the extension lines are additionally extended beyond the dimension line Η απόσταση που οι γραμμές επέκτασης επεκτείνονται επιπλέον πέρα από τη γραμμή διάστασης Font size Μέγεθος γραμματοσειράς The line spacing for multi-line texts and labels (relative to the font size) Η απόσταση γραμμών για κείμενα και ετικέτες (σε σχέση με το μέγεθος της γραμματοσειράς) The color of texts, dimension texts and label texts Το χρώμα των κειμένων, των κειμένων διάστασης και των κειμένων ετικετών Text color Χρώμα κειμένου Units Μονάδες A multiplier factor that affects the size of texts and markers Είναι ή τιμή (αριθμός) για να μεγαλώσετε ή να μικρύνετε ομοιόμορφα όλα τα κείμενα και τα σύμβολα όπως βέλη ή σημεία στο σχέδιό σας. (Πώς λειτουργεί: Αν ο συντελεστής είναι 1.0, τα μεγέθη παραμένουν ως έχουν. Αν τον κάνετε 2.0, όλα τα κείμενα και οι δείκτες θα γίνουν διπλάσιοι. Αν τον κάνετε 0.5, θα γίνουν οι μισοί.) Style Name Όνομα στυλ The name of the style. Existing style names can be edited. Το όνομα του στυλ. Μπορείτε να επεξεργαστείτε τα ονόματα των στυλ που υπάρχουν ήδη. Add new… Προσθήκη νέου… Scale multiplier Πολλαπλασιαστής κλίμακας The type of the starting arrows or markers to use for dimensions and labels Ο τύπος των αρχικών βελών ή δεικτών που πρέπει να χρησιμοποιούνται για τις διαστάσεις και τις ετικέτες Start arrow type Τύπος Αρχικού βέλους None Κανένα The size of the starting arrows or markers in system units Η τιμή που καθορίζει πόσο μεγάλα ή μικρά θα φαίνονται τα βέλη στην αρχή των γραμμών διάστασης, χρησιμοποιώντας τη μονάδα μέτρησης που έχετε ορίσει στο freecad (συνήθως χιλιοστά - mm) Start arrow size Μέγεθος Αρχικού βέλους The type of the ending arrows or markers to use for dimensions and labels Η επιλογή που καθορίζει τη μορφή του συμβόλου (βέλος, τελεία, γραμμή) που θα εμφανίζεται στο τέλος μιας γραμμής διάστασης ή μιας ετικέτας σημείωσης End arrow type Τύπος τελικού βέλους The size of the ending arrows or markers in system units Είναι η αριθμητική τιμή που ορίζει πόσο μεγάλο θα είναι το βέλος (ή ο δείκτης) στο τέλος μιας γραμμής διάστασης, χρησιμοποιώντας τη βασική μονάδα μέτρησης του έργου σας End arrow size Μέγεθος τελικού βέλους If it is checked it will show the unit next to the dimension value Εάν είναι επιλεγμένο, θα εμφανιστεί η μονάδα δίπλα στην τιμή της διάστασης Show unit Εμφάνιση μονάδας Specify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unit Καθορίστε μια έγκυρη μονάδα μήκους όπως mm, m, in, ft, για την εμφάνιση της τιμής διάστασης σε αυτή τη μονάδα Unit override Παράκαμψη μονάδας The number of decimals to show for dimension values Ο αριθμός των δεκαδικών που εμφανίζονται για τις τιμές των διαστάσεων Dimension Details Λεπτομέρειες Διάστασης The distance between the dimension text and the dimension line Η απόσταση μεταξύ διάστασης κειμένου και της διάστασης γραμμής Text spacing Αποστάσεις κειμένου Annotations Περιγραφές Texts Κείμενα Line spacing factor Συντελεστής διαστήματος γραμμής Lines and Arrows Γραμμές και Βέλη Displays the dimension line Εμφανίζει τη γραμμή διάστασης Show dimension line Εμφάνιση γραμμής διάστασης Line width Πλάτος γραμμής Dot Τελεία Circle Κύκλος Arrow Βέλος Tick Σημειώστε Tick-2 Σημειώστε-2 Shows the unit next to the dimension value Εμφανίζει τη μονάδα μέτρησης (π. χ. mm, in, m) αμέσως μετά τον αριθμό της διάστασης στο σχέδιο Number of decimals Αριθμός δεκαδικών Extension line overshoot Υπέρβαση γραμμής επέκτασης The length of the extension lines Το μήκος των γραμμών επέκτασης DraftCircularArrayTaskPanel Circular Array Κυκλική Διάταξη Distance from one layer of objects to the next layer of objects Distance from one layer of objects to the next layer of objects Radial distance Ακτινική απόσταση Distance from one element in one ring of the array to the next element in the same ring. It cannot be zero. Απόσταση από ένα στοιχείο ενός δακτυλίου της διάταξης στο επόμενο στοιχείο του ίδιου δακτυλίου. Δεν μπορεί να είναι μηδέν. Tangential distance Εφαπτομενική απόσταση The number of symmetry lines in the circular array The number of symmetry lines in the circular array Center of Rotation Center of Rotation Resets the coordinates of the center of rotation Μηδενίζει τις τιμές θέσης του σημείου γύρω από το οποίο περιστρέφεται μια διάταξη ή ένα αντικείμενο, επαναφέροντάς το στην αρχή των αξόνων (0,0,0) Reset Point Επαναφορά Σημείου Symmetry Συμμετρία Number of concentric circles to create, including a copy of the original object. It must be at least 2. Number of concentric circles to create, including a copy of the original object. It must be at least 2. Number of concentric circles Number of concentric circles The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Κυκλικό βέλος. X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Αν επιλεγεί, τα αντίγραφα που ακουμπάνε μεταξύ τους θα ενωθούν σε ένα σώμα. Λειτουργεί μόνο αν η "Διάταξη συνδέσμων" είναι κλειστή. Fuse Συγχώνευση If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Αν επιλεγεί, το αντικείμενο που θα προκύψει θα είναι μια "Διάταξη συνδέσμων" αντί για μια κανονική διάταξη. Μια διάταξη συνδέσμων είναι πιο αποδοτική κατά τη δημιουργία πολλών αντιγράφων, αλλά τα στοιχεία της δεν μπορούν να συγχωνευθούν (ενωθούν) μεταξύ τους. Link array Διάταξη συνδέσμων DraftOrthoArrayTaskPanel Number of elements in the array in the specified direction, including a copy of the original object. The number must be at least 1 in each direction. Αυτή η ρύθμιση καθορίζει πόσα αντίγραφα του αντικειμένου σας θα δημιουργηθούν προς μια συγκεκριμένη πλευρά (π. χ. οριζόντια, κάθετα ή σε βάθος) συμπεριλαμβανομένου και του αρχικού αντικειμένου. Ο αριθμός πρέπει να είναι τουλάχιστον 1 για κάθε κατεύθυνση. X X Y Y Z Z Reset X Επαναφορά X Reset Y Επαναφορά Y Distance between the elements in the Z direction. Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Απόσταση μεταξύ των στοιχείων, (πώς θα απλώνονται τα αντίγραφα καθ' ύψος στον άξονα Z). Συνήθως, μόνο η τιμή Z είναι απαραίτητη· οι άλλες δύο τιμές μπορούν να δώσουν μια επιπλέον μετατόπιση στις αντίστοιχες κατευθύνσεις τους. Οι αρνητικές τιμές θα οδηγήσουν σε αντίγραφα στην αρνητική κατεύθυνση. Orthogonal Array Orthogonal Array Toggles between orthogonal and linear mode Toggles between orthogonal and linear mode Switch to Linear Mode Switch to Linear Mode X axis Άξονας X Y axis Άξονας Υ Z axis Άξονας Ζ Number of Elements Αριθμός Στοιχείων Currently selected axis Currently selected axis Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the X-direction. Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. X Intervals X Intervals Resets the distances Επαναφορά των αποστάσεων Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Distance between the elements in the Y-direction. Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions. Negative values will result in copies produced in the negative direction. Y Intervals Y Intervals Z Intervals Z Intervals Reset Z Επαναφορά Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Αν επιλεγεί, τα αντίγραφα που ακουμπάνε μεταξύ τους θα ενωθούν σε ένα σώμα. Λειτουργεί μόνο αν η "Διάταξη συνδέσμων" είναι κλειστή. Fuse Συγχώνευση If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Αν επιλεγεί, το αντικείμενο που θα προκύψει θα είναι μια "Διάταξη συνδέσμων" αντί για μια κανονική διάταξη. Μια διάταξη συνδέσμων είναι πιο αποδοτική κατά τη δημιουργία πολλών αντιγράφων, αλλά τα στοιχεία της δεν μπορούν να συγχωνευθούν (ενωθούν) μεταξύ τους. Link array Διάταξη συνδέσμων DraftPolarArrayTaskPanel Polar Array Polar Array Sweeping angle of the polar distribution. A negative angle produces a polar pattern in the opposite direction. The maximum absolute value is 360 degrees. Αυτή η ρύθμιση καθορίζει πόσο «ανοιχτή» θα είναι η βεντάλια της κυκλικής σας διάταξης. Γωνία κάλυψης: Είναι το συνολικό τόξο πάνω στο οποίο θα απλωθούν τα αντίγραφά σας. Αν βάλετε 360°, τα αντικείμενα θα σχηματίσουν έναν πλήρη κύκλο, αν βάλετε 180° τα αντικείμενα θα απλωθούν σε έναν ημικύκλιο. Οι θετικές τιμές απλώνουν τα αντικείμενα αριστερόστροφα, ενώ οι αρνητικές τιμές (π. χ. -90°) τα απλώνουν δεξιόστροφα. Η μέγιστη απόλυτη τιμή είναι οι 360 μοίρες. Polar angle Γωνία περιστροφής Number of elements in the array, including a copy of the original object. It must be at least 2. Ο αριθμός των αντικειμένων στη διάταξη, συμπεριλαμβανομένου και του αρχικού αντικειμένου. Πρέπει να είναι τουλάχιστον 2. Number of elements Αριθμός Στοιχείων The coordinates of the point through which the axis of rotation passes. Change the direction of the axis itself in the property editor. Αυτή η ρύθμιση ορίζει το «πού» βρίσκεται το κέντρο γύρω από το οποίο θα γυρίσουν τα αντίγραφα της διάταξής σας. Αλλάξτε την κατεύθυνση του ίδιου του άξονα στον πίνακα ιδιοτήτων. Center of Rotation Center of Rotation Resets the coordinates of the center of rotation Μηδενίζει τις τιμές θέσης του σημείου γύρω από το οποίο περιστρέφεται μια διάταξη ή ένα αντικείμενο, επαναφέροντάς το στην αρχή των αξόνων (0,0,0) Reset Point Επαναφορά Σημείου X X Y Y Z Z If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Αν επιλεγεί, τα αντίγραφα που ακουμπάνε μεταξύ τους θα ενωθούν σε ένα σώμα. Λειτουργεί μόνο αν η "Διάταξη συνδέσμων" είναι κλειστή. Fuse Συγχώνευση If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Αν επιλεγεί, το αντικείμενο που θα προκύψει θα είναι μια "Διάταξη συνδέσμων" αντί για μια κανονική διάταξη. Μια διάταξη συνδέσμων είναι πιο αποδοτική κατά τη δημιουργία πολλών αντιγράφων, αλλά τα στοιχεία της δεν μπορούν να συγχωνευθούν (ενωθούν) μεταξύ τους. Link array Διάταξη συνδέσμων DraftShapeStringGui ShapeString Πλαίσιο Συμβολοσειράς Κειμένου X X Y Y Z Z Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Global Καθολικό Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Font files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB) Text to be made into ShapeString Κείμενο για μετατροπή σε σχήμα Enter coordinates or pick a point with the mouse Enter coordinates or pick a point with the mouse Resets the picked point Επαναφορά του επιλεγμένου σημείου Reset Point Επαναφορά Σημείου Height Ύψος Height of the result Ύψος του αποτελέσματος Text Κείμενο Font file Αρχείο γραμματοσειράς Form Top (XY) Επάνω (XY) Front (XZ) Εμπρός (XZ) Side (YZ) Πλευρική (YZ) Sets the working plane facing the current view Ορίζει το επίπεδο εργασίας ώστε να βλέπει προς την τρέχουσα προβολή Working Plane Setup Working Plane Setup Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. Choose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view. Sets the working plane to the XY-plane (ground plane) Sets the working plane to the XY-plane (ground plane) Sets the working plane to the XZ-plane (front plane) Sets the working plane to the XZ-plane (front plane) Sets the working plane to the YZ-plane (side plane) Sets the working plane to the YZ-plane (side plane) Align to View Align to View The working plane will align to the current view each time a command is started Το επίπεδο εργασίας θα ευθυγραμμιστεί με την τρέχουσα προβολή κάθε φορά που ξεκινά μια εντολή Automatic Αυτόματη Offset Μετατόπιση (Offset) An optional offset to give to the working plane above its base position. Use this together with one of the buttons above Μια προαιρετική μετατόπιση (offset) για το επίπεδο εργασίας πάνω από την αρχική του θέση. Χρησιμοποιήστε το σε συνδυασμό με ένα από τα παραπάνω κουμπιά If this is selected, the working plane will be centered on the current view when pressing one of the buttons above Εάν επιλεγεί αυτό, το επίπεδο εργασίας θα κεντραριστεί στην τρέχουσα προβολή όταν πατήσετε ένα από τα παραπάνω κουμπιά Center plane on view Κεντρικό επίπεδο στην προβολή Centers the working plane on the current view when pressing one of the buttons above Centers the working plane on the current view when pressing one of the buttons above Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. Επιλέξτε μια μόνο κορυφή για να μετακινήσετε το τρέχον επίπεδο εργασίας χωρίς να αλλάξετε τον προσανατολισμό του. Στη συνέχεια, πατήστε το κουμπί επόμενο. Moves the working plane without changing its orientation. If no point is selected, the plane will be moved to the center of the view. Μετακινεί το επίπεδο εργασίας χωρίς να το αλλάζει ο προσανατολισμός. Εάν δεν έχει επιλεγεί κανένα σημείο, το επίπεδο θα μετακινηθεί στο κέντρο της προβολής. Move Working Plane Move Working Plane The color of the grid Το χρώμα του Πλέγματος (κανάβου) Grid color Χρώμα πλέγματος: The distance between grid lines Η απόσταση μεταξύ των γραμμών πλέγματος The number of squares between major grid lines Ο αριθμός τετραγώνων ανάμεσα στις κύριες γραμμές του πλέγματος Major lines every Μεγάλες γραμμές squares τετράγωνα Grid size Μέγεθος κανάβου The distance at which a point can be snapped to Η απόσταση στην οποία μπορεί να προσεγγιστεί ένα σημείο Center View Center View Resets the working plane to its next position Επαναφέρει το επίπεδο εργασίας στην επόμενη θέση του Next Επόμενο Grid spacing Αποστάσεις του κανάβου The number of squares in the X- and Y-direction of the grid The number of squares in the X- and Y-direction of the grid Snapping radius Ακτίνα έλξης Centers the view on the current working plane Είναι μια εντολή που μετακινεί αυτόματα την κάμερα ώστε το σημείο που σχεδιάζετε (το επίπεδο εργασίας) να έρθει ακριβώς στο κέντρο της οθόνης σας Resets the working plane to its previous position Επαναφέρει το επίπεδο εργασίας στην προηγούμενη θέση του Previous Προηγούμενο Load preset Φόρτωση προεπιλογής Shape Σχήμα Ambient shape color Χρώμα σχήματος περιβάλλοντος Emissive shape color Απαλό χρώμα σχήματος Specular shape color Χρώμα κατοπτρικού σχήματος Shape transparency Διαφάνεια σχήματος Shape shininess Φωτεινότητα σχήματος Other Άλλο Line color Χρώμα γραμμής Line width Πλάτος γραμμής px px Draw style Τύπος μορφοποίησης σχεδίασης Solid Στερεό Dashed Διακεκομμένη Dotted Διάσπαρτα DashDot Παύλα-Τελεία Display mode Λειτουργία προβολής Flat Lines Flat Lines Wireframe Σκελετός Shaded Σκιασμένη Fill the values below from a stored style preset Συμπληρώστε τις παρακάτω τιμές από μια αποθηκευμένη προεπιλογή Point color Χρώμα σημείου Point size Μέγεθος σημείου Points Σημεία Shape color Χρώμα σχήματος Annotations Περιγραφές Extension line length Μήκος γραμμής επέκτασης Extension line overshoot Υπέρβαση γραμμής επέκτασης Text spacing Αποστάσεις κειμένου Text color Χρώμα κειμένου Dimensions Διαστάσεις Dot Τελεία Annotation Περιγραφή Texts Κείμενα Line spacing factor Συντελεστής διαστήματος γραμμής The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Ο πολλαπλασιαστής κλίμακας είναι το αντίστροφο της κλίμακας που ορίζεται στο Γραφικό στοιχείο κλίμακας. Εάν η κλίμακα είναι 1:100, ο πολλαπλασιαστής είναι 100. Start arrow type Τύπος Αρχικού βέλους Circle Κύκλος Arrow Βέλος Tick Σημειώστε Tick-2 Σημειώστε-2 None Κανένα Start arrow size Μέγεθος Αρχικού βέλους End arrow type Τύπος τελικού βέλους End arrow size Μέγεθος τελικού βέλους The unit override for dimensions. Leave blank to use the current FreeCAD unit. Παράκαμψη μονάδας για διαστάσεις. Αφήστε κενό για χρήση της τρέχουσας μονάδας FreeCAD. Dimension line overshoot Υπέρβαση γραμμής διάστασης The distance the dimension line is extended past the extension lines Η απόσταση κατά την οποία επεκτείνεται η γραμμή διάστασης πέρα από τις γραμμές επέκτασης The color for texts, dimension texts and label texts Το χρώμα των κειμένων, των κειμένων διάστασης και των κειμένων ετικετών Font name Όνομα γραμματοσειράς The font for texts, dimensions and labels Η γραμματοσειρά για τα κείμενα, τις διαστάσεις και τις ετικέτες Font size Μέγεθος γραμματοσειράς The height for texts, dimension texts and label texts Η γραμματοσειρά για τα κείμενα, τα κείμενα διαστάσεων και τα κείμενα ετικετών The line spacing for multi-line texts and labels (relative to the font size) Η απόσταση γραμμών για κείμενα και ετικέτες (σε σχέση με το μέγεθος της γραμματοσειράς) Scale multiplier Πολλαπλασιαστής κλίμακας Line and arrow color Χρώμα γραμμής και βέλους Style Settings Ρυθμίσεις στυλ Saves the current style as a preset Αποθήκευση του τρέχοντος στυλ ως προεπιλογή Shape Appearance Shape Appearance Lines and Arrows Γραμμές και Βέλη Adds a unit symbol to dimension texts Adds a unit symbol to dimension texts The length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. Το μήκος γραμμών επέκτασης. Χρησιμοποιήστε 0 για γραμμές πλήρους επέκτασης. Μια αρνητική τιμή ορίζει το κενό μεταξύ των άκρων των γραμμών επέκτασης και των μετρούμενων σημείων. Μια θετική τιμή ορίζει το μέγιστο μήκος των γραμμών επέκτασης. Χρησιμοποιείται μόνο για γραμμικές διαστάσεις. The length of extension lines above the dimension line Το Μήκος της γραμμής επέκτασης υπερβαίνει την γραμμή διάστασης The space between the dimension line and the dimension text Το διάστημα μεταξύ της γραμμής διάστασης και του κειμένου διάστασης Apply the above style to selected object(s) Εφαρμογή του παραπάνω στυλ στο(α) επιλεγμένο(α) αντικείμενο(α) Apply the above style to all annotations (texts, dimensions and labels) Εφαρμογή του παραπάνω στυλ σε όλες τις σημειώσεις (κείμενα, διαστάσεις και ετικέτες) Show unit Εμφάνιση μονάδας Unit override Παράκαμψη μονάδας Selected Επιλεγμένα Hatch Hatch PAT file Αρχείο PAT Pattern Μοτίβο Scale Κλίμακα Rotation Περιστροφή Align to face Align to face Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. Aligns the pattern with the base object. Otherwise, the pattern aligns with the global coordinate system. This setting modifies the Translate property. Pattern files (*.pat *.PAT) Αρχεία σχεδίων (*.pat *.PAT) Gui::Dialog::DlgSettingsDraft Default working plane Προεπιλεγμένο επίπεδο εργασίας General Γενικές The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. Ο αριθμός των δεκαδικών που χρησιμοποιούνται σε εσωτερικές λειτουργίες συντεταγμένων (για παράδειγμα 3 = 0. 01). Οι τιμές μεταξύ 6 και 8 θεωρούνται συνήθως οι καλύτερες ανταλλαγές. The default working plane for new views. If set to "Automatic" the working plane will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. Το προεπιλεγμένο επίπεδο εργασίας για νέες προβολές. Εάν οριστεί σε "Αυτόματο" το επίπεδο εργασίας θα ευθυγραμμιστεί αυτόματα με την τρέχουσα προβολή κάθε φορά που ξεκινά μια εντολή. Επιπλέον, θα ευθυγραμμιστεί με προεπιλεγμένα επίπεδα πρόσωπα, ή όταν επιλεγούν σημεία σε επίπεδο όψεις κατά τη διάρκεια εντολών. XY (Top) XY (Πάνω όψη) XZ (Front) XZ (Πρόσοψη) YZ (Side) YZ (Πλάγια όψη) If checked, a widget indicating the current working plane orientation appears when picking points Αν επιλεχθεί, εμφανίζεται ένα εργαλείο που υποδεικνύει τον προσανατολισμό του τρέχοντος επιπέδου εργασίας κατά τη διάρκεια λειτουργιών σχεδίασης If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. Εάν επιλεγεί, η αναπτυσσόμενη λίστα επιπέδων περιλαμβάνει επίσης ομάδες. Τα αντικείμενα μπορούν στη συνέχεια να προστεθούν αυτόματα και σε ομάδες. Include groups in layer list Συμπεριλάβετε ομάδες στη λίστα επιπέδων If checked, base objects, instead of created copies, are selected after copying Αν ενεργοποιηθεί, επιλέγονται τα βασικά αντικείμενα, αντί των δημιουργημένων αντιγράφων, μετά την αντιγραφή If checked, Draft commands will create Part primitives instead of Draft objects. Note that this is not fully supported, and many objects will not be editable with Draft modification commands. Αν επιλεχθεί, οι εντολές Σχεδίου θα δημιουργήσουν πρωτότυπα τμήματα αντί για αντικείμενα Σχεδίου. Σημειώστε ότι αυτό δεν υποστηρίζεται πλήρως και πολλά αντικείμενα, δεν είναι επεξεργάσιμο με εντολές τροποποίησης Σχεδίου. Create Part primitives if possible Δημιουργία εξαρτημάτων αρχικού σταδίου, αν είναι δυνατόν If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. If checked, Draft Downgrade and Draft Upgrade will keep face colors. Only for the splitFaces and makeShell options. Keep face colors during downgrade/upgrade Keep face colors during downgrade/upgrade If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. If checked, Draft Downgrade and Draft Upgrade will keep face names. Only for the splitFaces and makeShell options. Keep face names during downgrade/upgrade Keep face names during downgrade/upgrade This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. This is a delay during which the mouse is inactive, after entering numbers manually in any of the coordinate fields. Setting this to 0 disables the delay. If a delay of 1 is set, after entering a numeric value, the mouse will not update the field anymore during one second, to avoid moving the mouse accidentally and modifying the entered value. Edit node pick radius Επεξεργασία ακτίνας κόμβου επιλογής The pick radius of edit nodes Η ακτίνα επιλογής κόμβων επεξεργασίας Label prefix for clones Πρόθεμα ετικέτας για κλώνους The default prefix added to the label of new clones The default prefix added to the label of new clones Construction group label Construction group label The default label for the construction geometry group The default label for the construction geometry group The default color for Draft objects in construction mode The default color for Draft objects in construction mode Internal precision level Επίπεδο εσωτερικής ακρίβειας Show working plane orientation Show working plane orientation Command Options Command Options If checked, instructions are displayed in the Report View when using Draft commands If checked, instructions are displayed in the Report View when using Draft commands Show prompts in the Report View Show prompts in the Report View If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. If checked, Length input, instead of the X coordinate, will have the initial focus. This allows indicating a direction and then type a distance. Set focus on Length instead of X coordinate Εστίαση στο Μήκος αντί για τη συντεταγμένη (άξονα) X. Select base objects after copying Επιλογή αντικειμένων βάσης μετά από την αντιγραφή Maximum number of editable objects Maximum number of editable objects Construction Κατασκευή Construction geometry color Χρώμα κατασκευαστικής γεωμετρίας Draft classic style Κλασσικός τύπος μορφοποίησης Προσχεδίου Bitsnpieces style Τύπος μορφοποίησης Bitsnpieces Visual Οπτική SVG Patterns Μοτίβα SVG SVG pattern size Μέγεθος μοτίβου SVG The default size for SVG patterns. A higher value results in a denser pattern. Προεπιλεγμένο μέγεθος για τα πρότυπα SVG. Μια υψηλότερη τιμή έχει ως αποτέλεσμα ένα πυκνότερο μοτίβο. Additional SVG pattern location Πρόσθετη τοποθεσία μοτίβου SVG An optional directory with custom SVG files containing pattern definitions to be added to the standard patterns Ένας προαιρετικός κατάλογος με προσαρμοσμένα αρχεία SVG που περιέχουν ορισμούς μοτίβο για να προστεθούν στα πρότυπα Drawing View Line Definitions Drawing View Line Definitions Dashed line definition Προσδιορισμός διακεκομμένης γραμμής An SVG linestyle definition Ένας ορισμός τύπου μορφοποίησης γραμμών SVG Dashdot line definition Προσδιορισμός της διακεκομμένης γραμμής από τελείες και παύλες Dotted line definition Προσδιορισμός της διακεκομμένης γραμμής από τελείες Texts and dimensions Κείμενα και διαστάσεις Font size Μέγεθος γραμματοσειράς mm χιλιοστά Lines and Arrows Γραμμές και βέλη Start arrow type Τύπος Αρχικού βέλους The default symbol displayed at the start of dimension lines The default symbol displayed at the start of dimension lines None Κανένα Start arrow size Μέγεθος Αρχικού βέλους The default starting arrow size The default starting arrow size End arrow type Τύπος τελικού βέλους The default symbol displayed at the end of dimension lines The default symbol displayed at the end of dimension lines End arrow size Μέγεθος τελικού βέλους The default ending arrow size The default ending arrow size Number of decimals Αριθμός δεκαδικών Dimension Details Λεπτομέρειες διάστασης Extension line overshoot Υπέρβαση γραμμής επέκτασης Dimension line overshoot Υπέρβαση γραμμής διάστασης The default annotation scale multiplier. This is the inverse of the scale set in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. The default annotation scale multiplier. This is the inverse of the scale set in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100. Texts Κείμενα The default height for texts, dimension texts and label texts Η γραμματοσειρά για κείμενα, κείμενα διαστάσεων και κείμενα ετικετών Line spacing factor Συντελεστής διαστήματος γραμμής The default line spacing for multi-line texts and labels (relative to the font size) Η απόσταση γραμμών για κείμενα και ετικέτες (σε σχέση με το μέγεθος της γραμματοσειράς) Scale multiplier Πολλαπλασιαστής κλίμακας Texts and Dimensions Κείμενα και διαστάσεις Annotations Περιγραφές Font name Όνομα γραμματοσειράς The default font for texts, dimensions and labels The default font for texts, dimensions and labels Text color Χρώμα κειμένου The default color for texts, dimension texts and label texts Προεπιλεγμένο χρώμα για κείμενα, κείμενα διαστάσεων και κείμενα ετικετών If checked, the dimension line is displayed by default Εάν είναι επιλεγμένο, η γραμμή διαστάσεων εμφανίζεται από προεπιλογή Show dimension line Εμφάνιση γραμμής διάστασης Line width Πλάτος γραμμής The default line width Το προεπιλεγμένο πλάτος γραμμής px px Dot Τελεία Circle Κύκλος Arrow Βέλος Tick Σημειώστε Tick-2 Σημειώστε-2 Line and arrow color Χρώμα γραμμής και βέλους The default color for lines and arrows The default color for lines and arrows Units Μονάδες If checked, a unit symbol is added to dimension texts by default If checked, a unit symbol is added to dimension texts by default Show unit Εμφάνιση μονάδας Unit override Παράκαμψη μονάδας The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. The default number of decimal places for dimension texts The default number of decimal places for dimension texts The optional string inserted between the feet and inches values in dimensions The optional string inserted between the feet and inches values in dimensions The default distance the dimension line is extended past the extension lines The default distance the dimension line is extended past the extension lines Extension line length Μήκος γραμμής επέκτασης The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The default length of extension lines. Use 0 for full extension lines. A negative value defines the gap between the ends of the extension lines and the measured points. A positive value defines the maximum length of the extension lines. Only used for linear dimensions. The default length of extension lines above the dimension line Το Μήκος της γραμμής επέκτασης υπερβαίνει την γραμμή διάστασης The default space between the dimension line and the dimension text The default space between the dimension line and the dimension text Text spacing Αποστάσεις κειμένου Feet separator Διαχωριστικό ποδιών SVG SVG Import style Εισαγωγή τύπου μορφοποίησης Use default style from Part/PartDesign Use default style from Part/PartDesign Use original SVG style Χρήση αρχικού στυλ SVG If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. If checked, no unit conversion will occur. One unit in the SVG file will be interpreted as one millimeter. Disable unit scaling Disable unit scaling Add wires for invalid faces Add wires for invalid faces Method for importing SVG object colors Method for importing SVG object colors If face generation results in a degenerated face, a raw wire from the original shape is added If face generation results in a degenerated face, a raw wire from the original shape is added Check to cut shapes according to the even/odd SVG fill rule Check to cut shapes according to the even/odd SVG fill rule Apply Cuts Apply Cuts Coordinate precision (crucial for detecting closed paths) Coordinate precision (crucial for detecting closed paths) The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. The number of decimal places used in internal coordinate operations (for example 3 = 0.001). The optimal value depends on the absolute size of the import. Typical values are between 1 and 5. Export style Τύπος μορφοποίησης εξαγωγής Style of SVG file to write when exporting a sketch Στυλ αρχείου SVG για εγγραφή κατά την εξαγωγή ενός σκίτσου Translated (for print & display) Μεταφρασμένο (για εκτύπωση & προβολή) Raw (for CAM) Ακατέργαστο (για CAM) All white lines will appear in black in the SVG for better readability against white backgrounds Όλες οι λευκές γραμμές θα εμφανίζονται σε μαύρο χρώμα στο SVG για καλύτερη αναγνωσιμότητα σε λευκό φόντο Convert white line color to black Convert white line color to black Maximum segment length for discretized arcs Maximum segment length for discretized arcs Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. Versions of OpenCASCADE older than version 6.8 don't support arc projection. In this case arcs will be discretized into small line segments. This value is the maximum segment length. OCA OCA Import Options Επιλογές εισαγωγής Imports the areas (3D faces) too Imports the areas (3D faces) too Import OCA areas Εισάγετε περιοχές OCA DXF DXF Allow FreeCAD to automatically download and update the DXF libraries Να επιτρέπεται στο FreeCAD να κατεβάζει και ανανεώνει αυτόματα τις βιβλιοθήκες DXF Import Εισάγετε All objects containing faces will be exported as 3D polyface meshes All objects containing faces will be exported as 3D polyface meshes Project exported objects along current view direction Προβάλετε τα εξαγόμενα αντικείμενα κατά την τρέχουσα διεύθυνση προβολής Use colors from the DXF file Χρήση χρωμάτων από το αρχείο DXF Join geometry Ένωση γεωμετρίας Use standard font size for texts Χρησιμοποιήστε το καθιερωμένο μέγεθος γραμματοσειράς για κείμενα Render polylines with width Render polylines with width Ellipse export is poorly supported. Use this to export them as polylines instead. Η εξαγωγή σε έλλειψη δεν υποστηρίζεται πλήρως. Χρησιμοποιείστε αυτό για να τις εξάγετε ως polylines αντί γι'αυτές. Treat ellipses and splines as polylines Αντιμετωπίστε τις ελλείψεις και τις καμπύλες spline ως πολυγραμμές If checked, this preferences dialog will be shown each time you import or export a DXF file. If checked, this preferences dialog will be shown each time you import or export a DXF file. Show the importer dialog when importing a file Show the importer dialog when importing a file Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. Use the legacy Python importer. This importer is more feature-complete but slower and requires an external library. Use legacy importer Use legacy importer Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. Use the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library. Use legacy exporter Use legacy exporter Automatic Update (Legacy Only) Automatic Update (Legacy Only) If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. If checked, FreeCAD is allowed to download and update the Python libraries required by the legacy importer. This can also be done manually by installing the 'dxf_library' addon from the Addon Manager. Import As Εισαγωγή ως Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Editable Draft objects (highest fidelity, slowest) Editable Draft objects (highest fidelity, slowest) DxfImportMode DxfImportMode Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing and Part workbench integration. Editable Part primitives (high fidelity, slower) Editable Part primitives (high fidelity, slower) Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Individual Part shapes (balanced, recommended) Individual Part shapes (balanced, recommended) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for importing and viewing very large files with maximum performance. Fused Part shapes (lowest fidelity, fastest) Fused Part shapes (lowest fidelity, fastest) Import Settings Ρυθμίσεις εισαγωγής Global scaling factor Global scaling factor Scale factor to apply to DXF files on import. The factor is the conversion between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 Scale factor to apply to DXF files on import. The factor is the conversion between the DXF file's unit and millimeters. Example: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 If checked, text, mtext, and dimension entities will be imported as Draft objects If checked, text, mtext, and dimension entities will be imported as Draft objects If checked, point entities will be imported If checked, point entities will be imported Points Σημεία If checked, entities from the paper space will also be imported. By default, only model space is imported If checked, entities from the paper space will also be imported. By default, only model space is imported Paper space objects Paper space objects If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions If checked, anonymous blocks (whose names begin with *) will also be imported. These are often used for hatches and dimensions Anonymous blocks (*-blocks) Anonymous blocks (*-blocks) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) If checked, the boundaries of hatch objects will be imported as closed wires. (Legacy importer only) Hatch boundaries Hatch boundaries Appearance Εμφάνιση If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied If checked, colors will be set as specified in the DXF file whenever possible. Otherwise, default FreeCAD colors are applied If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) If checked, imported texts will get the standard Draft text size, instead of the size defined in the DXF document. (Legacy importer only) Advanced processing Advanced processing If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) If checked, the legacy importer will attempt to join coincident geometric objects into wires. This can be slow for large files. (Legacy importer only) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) If checked, polylines that have a width property will be rendered as faces representing that width. (Legacy importer only) If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting If checked, the legacy importer will attempt to create Sketcher objects instead of Draft or Part objects. This overrides the 'Import As' setting Create sketches Create sketches Export Options Επιλογές εξαγωγής Maximum spline segment Maximum spline segment Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. Maximum length of each of the polyline segments. '0' treats the whole spline as a straight segment. Export 3D objects as polyface meshes Export 3D objects as polyface meshes TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. TechDraw Views will be exported as blocks. This might fail for post DXF R12 templates. Export TechDraw Views as blocks Εξαγωγή Προβολών TechDraw ως μπλοκ Exported objects will be projected to reflect the current view direction Τα αντικείμενα προς εξαγωγή θα προβάλλονται ώστε να αντικατοπτρίζουν την τρέχουσα κατεύθυνση προβολής Shift Shift Always snap Πάντα προσκόλληση Grid and Snapping Grid and Snapping If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. If checked, the outline of a human figure is displayed at the bottom left corner of the grid. Only effective if "Show grid border" is enabled. Major lines every Μεγάλες γραμμές The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. The number of squares between major grid lines. Major grid lines are thicker than minor grid lines. squares τετράγωνα Snapping and Modifier Keys Snapping and Modifier Keys Snap modifier Τροποποιητής Προσκόλλησης The Snap modifier key Το πλήκτρο τροποποίησης προσκόλλησης Ctrl Ctrl Alt Alt Constrain modifier Τροποποιητής Περιορισμών Alt modifier Εναλλακτική επεξεργασία The Alt modifier key. The function of this key depends on the command. The Alt modifier key. The function of this key depends on the command. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. The distance between grid lines Η απόσταση μεταξύ των γραμμών πλέγματος The maximum number of objects Draft Edit is allowed to process at the same time The maximum number of objects Draft Edit is allowed to process at the same time Grid Πλέγμα Always show the grid Να εμφανίζεται πάντα το πλέγμα If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. Show the grid during commands Show the grid during commands If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner Εμφάνιση του πλέγματος κατά τη διάρκεια των εντολών Show grid border Εμφάνιση περιγράμματος πλέγματος Show human figure Εμφάνιση ανθρώπινης φιγούρας If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system If checked, the two main axes of the grid are colored red, green or blue if they match the X, Y or Z axis of the global coordinate system Use colored axes Χρήση χρωματιστών αξόνων Grid spacing Αποστάσεις του πλέγματος (κανάβου) Grid size Μέγεθος πλέγματος (κανάβου) The number of squares in the X- and Y-direction of the grid The number of squares in the X- and Y-direction of the grid Grid transparency Διαφάνεια πλέγματος % % Grid color Χρώμα πλέγματος: The constrain modifier key The constrain modifier key Snap symbol style Τύπος μορφοποίησης των συμβόλων Προσκόλλησης Mouse delay Καθυστέρηση ποντικιού seconds δευτερόλεπτα The style for snap symbols Το στυλ για σύμβολα snap Snap symbol color Χρώμα συμβόλου έλξης The color for snap symbols Χρώμα συμβόλων έλξης If checked, snapping is activated without the need to press the Snap modifier key Αν αυτό έχει επιλεχθεί, η προσκόλληση ενεργοποιείται χωρίς να χρειάζεται να πιέσετε το κουμπί λειτουργίας προσκόλλησης The color of the grid Το χρώμα του Πλέγματος (κανάβου) The overall transparency of the grid Η συνολική διαφάνεια του πλέγματος DWG DWG This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. Αυτή είναι η μέθοδος που θα χρησιμοποιήσει το FreeCAD για τη μετατροπή αρχείων DWG σε DXF. Αν επιλεγεί το "Automatic", το FreeCAD θα προσπαθήσει να βρει έναν από τους παρακάτω μετατροπείς με την ίδια σειρά που εμφανίζονται εδώ. Αν το FreeCAD δεν είναι σε θέση να βρει, ίσως χρειαστεί να επιλέξετε ένα συγκεκριμένο μετατροπέα και να υποδείξετε τη διαδρομή του εδώ κάτω. Επιλέξτε το βοηθητικό πρόγραμμα "dwg2dxf" αν χρησιμοποιείτε το LibreDWG, "ODAFileConverter" εάν χρησιμοποιείτε το μετατροπέα αρχείων ODA, ή το βοηθητικό πρόγραμμα "dwg2dwg" εάν χρησιμοποιείτε την pro έκδοση του QCAD. Automatic Αυτόματη DWG Conversion Μετατροπή DWG Conversion method Μέθοδος μετατροπής LibreDWG LibreDWG ODA Converter Μετατροπέας ODA QCAD pro QCAD pro Path to file converter Μετατροπέας διαδρομής προς αρχείο The path to your DWG file converter executable The path to your DWG file converter executable <html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html> <html><head/><body><p><span style=" font-weight:600;">Σημείωση:</span>Οι επιλογές DXF εφαρμόζονται και στα αρχεία DWG.</p></body></html> Relative Σχετικό R R Continue Συνεχίστε Close Κλείσιμο O O Copy Αντιγραφή L L Interface Περιβάλλον χρήστη F F Select edge Επιλέξτε ακμή Subelement mode Τρόπος λειτουργίας υποστοιχείου B Β C C Exit Έξοδος A A Increase radius Αύξηση ακτίνας Decrease radius Μείωση ακτίνας E E Q Q Length Μήκος Wipe Εκκαθάριση W W U U Global Καθολικό In-Command Shortcuts In-Command Shortcuts G G Make face Make face Undo Αναίρεση N N Cycle snap Κυκλική εναλλαγή σημείων έλξης Add hold Προσθήκη Προσωρινού Σημείου Set working plane Ορισμός επιπέδου εργασίας Snap Έλξη S S Restrict X Περιορισμός στον άξονα X (Οριζόντιος) X X Restrict Y Περιορισμός στον άξονα Y (Βάθους) Y Y Restrict Z Περιορισμός στον άξονα Z (Ύψους) Z Z Recenter Recenter D D UI Options Επιλογές διεπαφής χρήστη If checked, the Draft Snap toolbar will only be visible during commands If checked, the Draft Snap toolbar will only be visible during commands Only show the Draft Snap toolbar during commands Only show the Draft Snap toolbar during commands If checked, the Draft Snap Widget is displayed in the Draft Status Bar If checked, the Draft Snap Widget is displayed in the Draft Status Bar Show the Draft Snap Widget in the Draft Workbench Show the Draft Snap Widget in the Draft Workbench If checked, the Draft Scale Widget is displayed in the Draft Status Bar If checked, the Draft Scale Widget is displayed in the Draft Status Bar Show the Draft Scale Widget in the Draft Workbench Show the Draft Scale Widget in the Draft Workbench draft Relative Σχετικό Global Καθολικό Continue Συνεχίστε If checked, the command will not finish until pressing the command button again If checked, the command will not finish until pressing the command button again If checked, the next dimension will be placed in a chain with the previously placed Dimension Αν επιλεγεί, η επόμενη διάσταση θα τοποθετηθεί σε σειρά (αλυσίδα) με την προηγούμενη Close Κλείσιμο Set Working Plane Ορίστε Επίπεδο Εργασίας Select Edge Select Edge Copy Αντιγραφή Wipe Εκκαθάριση All shapes must be coplanar All shapes must be coplanar Selected shapes must define a plane Selected shapes must define a plane Top Πάνω Front Εμπρόσθια Side Πλευρικά Auto Αυτόματο Current working plane: Auto Current working plane: Auto Current working plane: Τρέχον επίπεδο εργασίας: Selected shapes do not define a plane Τα επιλεγμένα σχήματα δεν ορίζουν ένα επίπεδο No previous working plane Δεν υπάρχει προηγούμενο επίπεδο εργασίας No next working plane Κανένα επόμενο επίπεδο εργασίας Axes: Άξονες: Position: Θέση: None Κανένα active command: ενεργή εντολή: Active Draft command Ενεργή εντολή Σχεδίου X coordinate of the point X coordinate of the point X X Y Y Z Z Length Μήκος Angle Γωνία Radius Ακτίνα Creates the text object and finishes the command Creates the text object and finishes the command Changes the default style for new objects Changes the default style for new objects Toggles construction mode Toggles construction mode Label Type Label Type Radius of Circle Ακτίνα του κύκλου Coordinates relative to last point or to coordinate system origin if is the first point to set Coordinates relative to last point or to coordinate system origin if is the first point to set Y coordinate of the point Y coordinate of the point Z coordinate of the point Z coordinate of the point Enter Point Enter Point Length of the current segment Μήκος του τρέχοντος τμήματος Angle of the current segment Γωνία του τρέχοντος τμήματος Locks the current angle Κλειδώνει την τρέχουσα γωνία Radius of the circle Ακτίνα του κύκλου Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system Finish Ολοκλήρωση Finishes the current drawing or editing operation Finishes the current drawing or editing operation Modify Objects Τροποποίηση αντικειμένων Facebinder Elements Facebinder Elements If checked, an OCC-style offset will be performed instead of the classic offset Εάν επιλεγεί, θα εκτελεστεί μια μετατόπιση τύπου OCC αντί της κλασικής μετατόπισης OCC-style offset Μετατόπιση στυλ OCC Undo Αναίρεση If checked, objects will be copied instead of moved Αν έχει επιλεχθεί, τα αντικείμενα θα αντιγράφονται αντί να μετακινούνται Undo the last segment Αναίρεση του τελευταίου τμήματος Enter a point with given coordinates Enter a point with given coordinates Make face Make face If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled If checked, the object will be filled with a face. Not available if the 'Use Part Primitives' preference is enabled Chained mode Chained mode Finishes and closes the current line Finishes and closes the current line Wipes the existing segments of this line and starts again from the last point Wipes the existing segments of this line and starts again from the last point Reorients the working plane on the last segment Reorients the working plane on the last segment Selects an existing edge to be measured by this dimension Selects an existing edge to be measured by this dimension Sides Πλευρές Number of sides Αριθμός πλευρών Modify subelements Τροποποίηση υποστοιχείων If checked, subelements will be modified instead of entire objects Εάν επιλεγεί, θα τροποποιηθούν τα υποστοιχεία αντί για ολόκληρα αντικείμενα Autogroup off Απενεργοποίηση Αυτόματης Ομαδοποίησης Line Γραμμή DWire Πολυγραμμή ( Σύνθετη Γραμμή) Circle Κύκλος Arc Τόξο Rotate Περιστροφή Point Σημείο Label Ετικέτα Offset Μετατόπιση (Offset) Distance Απόσταση Offset distance Απόσταση Μετατόπισης Trimex Περικοπή ή Επέκταση γραμμών Local {} Τοπικό {} Global {} Παγκόσμιο Autogroup: Αυτόματη Ομαδοποίηση: Faces Επιφάνειες Remove Αφαίρεση Add Προσθήκη Draft Προσχέδιο Converting: Μετατροπή: Conversion successful Επιτυχής μετατροπή LibreDWG converter not found Δεν βρέθηκε μετατροπέας LibreDWG ODA converter not found Δε βρέθηκε μετατροπέας ODA QCAD converter not found Δε βρέθηκε μετατροπέας QCAD No suitable external DWG converter has been found. Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences No suitable external DWG converter has been found. Please set one manually under menu Edit → Preferences → Import/Export → DWG For more information see: https://wiki.freecad.org/Import_Export_Preferences Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. Σφάλμα κατά τη μετατροπή DWG. Δοκιμάστε να μετακινήσετε το αρχείο DWG σε μια διαδρομή καταλόγου χωρίς κενά και μη αγγλικούς χαρακτήρες ή προσπαθήστε να το αποθηκεύσετε σε μια χαμηλότερη έκδοση DWG. Custom Επιλογή Unable to convert input into a scale factor Unable to convert input into a scale factor Set Custom Scale Set Custom Scale Draft Scale Widget A context menu action used to show or hide this toolbar widget Draft Scale Widget Set the scale used by Draft annotation tools Set the scale used by Draft annotation tools Draft Snap Widget A context menu action used to show or hide this toolbar widget Draft Snap Widget Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x No active document. Aborting. Δεν υπάρχει ενεργό έγγραφο. Εγκατάλειψη. Wrong input: object {} not in document. Λάθος είσοδος: αυτό το {} αντικείμενο δεν είναι στο έγγραφο. Unable to insert new object into a scaled part Δεν είναι δυνατή η εισαγωγή νέου αντικειμένου σε ένα κλιμακούμενο τμήμα Symbol not implemented. Using a default symbol. Το σύμβολο δεν έχει υλοποιηθεί. Χρησιμοποιήστε ένα προεπιλεγμένο σύμβολο. image is Null Η εικόνα είναι κενή filename does not exist on the system or in the resource file το όνομα αρχείου δεν υπάρχει στο σύστημα ή στο αρχείο unable to load texture αδυναμία φόρτωσης υφής Does not have 'ViewObject.RootNode'. Δεν διαθέτει 'ViewObject.RootNode'. Solids: Στερεά: Faces: Επιφάνειες: Wires: Σύνθετες Γραμμές: Edges: Ακμές: Vertices: Κορυφές: Face Επιφάνεια Wire Σύνθετη Γραμμή different types Διαφορετικοί τύποι Objects have different placements. Distance between the two base points: Τα αντικείμενα έχουν διαφορετικές τοποθετήσεις. Απόσταση μεταξύ των δύο βασικών σημείων: %s cannot be modified because its placement is readonly %s cannot be modified because its placement is readonly This function will be deprecated in {}. Please use '{}'. This function will be deprecated in {}. Please use '{}'. This function will be deprecated. Please use '{}'. This function will be deprecated. Please use '{}'. has a different value έχει διαφορετική τιμή doesn't exist in one of the objects δεν υπάρχει σε ένα από τα αντικείμενα %s shares a base with %d other objects. Please check if you want to modify this. %s shares a base with %d other objects. Please check if you want to modify this. Wrong input: unknown document {} Λάθος είσοδος: άγνωστο έγγραφο {} Pick target point Pick target point Create Label Δημιουργία ετικέτας Pick endpoint of leader line Pick endpoint of leader line Pick text position Pick text position Pick first point Pick first point Edges do not intersect! Edges do not intersect! Create Line Create Line Create Wire Create Wire %1 pick next point, snap to first point to close %1 pick next point, snap to first point to close %1 pick next point %1 επιλέξτε το επόμενο σημείο Unable to create a wire from the selected objects Unable to create a wire from the selected objects Polyline Πολλαπλές Γραμμές Pick next point Επέλεξε το επόμενο σημείο Convert to Wire Μετατροπή σε Σύνθετη Γραμμή Select an object to join Επιλέξτε ένα αντικείμενο προς μετακίνηση Join Lines Join Lines Only Draft lines and wires can be joined Only Draft lines and wires can be joined Selection: Επιλογή: Pick location point Επέλεξε σημείο τοποθεσίας Create Text Δημιουργία Κειμένου Select an object to convert Επιλέξτε ένα αντικείμενο προς μετατροπή Convert to Sketch Μετατροπή σε Σκίτσο Convert to Draft Μετατρέψτε σε Προσχέδιο Convert Draft/Sketch Μετατροπή Προσχεδίου/Σκίτσου Select an object to move Επιλέξτε ένα αντικείμενο προς μετακίνηση Pick start point Επέλεξε σημείο εκκίνησης Pick end point Επέλεξε σημείο τερματισμού No valid subelements selected No valid subelements selected Move Μετακίνηση Pick center point Επιλέξτε κεντρικό σημείο Pick radius Επιλέξτε ακτίνα Start angle Start angle Pick start angle Pick start angle Aperture angle Aperture angle Pick aperture Pick aperture %1 constrain %1 constrain %1 snap %1 snap %1/%2/%3 switch constraint %1/%2/%3 switch constraint %1 toggle relative %1 toggle relative %1 toggle global %1 toggle global %1 toggle continue %1 toggle continue %1 pick center %1 pick center %1 pick radius %1 pick radius %1 pick aperture %1 pick aperture Create Circle (Part) Create Circle (Part) Create Circle Create Circle Create Arc (Part) Create Arc (Part) Create Arc Create Arc Pick aperture angle Επιλέξτε γωνία διαφράγματος %1 pick start angle %1 pick start angle Arc From 3 Points Τόξο από 3 Σημεία Create Arc From 3 Points Create Arc From 3 Points %1 pick first point %1 επιλέξτε το πρώτο σημείο %1 pick second point %1 επιλέξτε το δεύτερο σημείο %1 pick third point %1 pick third point Select an object to edit Επιλέξτε ένα αντικείμενο για επεξεργασία Select a Draft object to edit Select a Draft object to edit Edit Node Επεξεργασία κόμβου Too many objects selected, maximum number set to: Too many objects selected, maximum number set to: No edit point found for selected object No edit point found for selected object : this object is not editable : αυτό το αντικείμενο δεν είναι επεξεργάσιμο Annotation Style Editor Annotation Style Editor New Style Νέο στυλ Style name Όνομα στυλ Style name required Απαιτείται όνομα στυλ No style name specified Δεν καθορίστηκε όνομα στυλ Style exists Το στυλ υπάρχει This style name already exists Αυτό το όνομα στυλ υπάρχει ήδη Style in use Στυλ σε χρήση This style is used by some objects in this document. Proceed? Αυτό το στυλ χρησιμοποιείται από κάποια αντικείμενα σε αυτό το έγγραφο. Συνέχεια; Rename Style Μετονομασία στυλ New name Νέο όνομα Open Styles File Άνοιγμα αρχείου στυλ JSON files (*.json *.JSON) JSON αρχεία (*.json *.JSON) Save Styles File Αποθήκευση αρχείου στυλ JSON file (*.json) Αρχείο JSON (*.json) Select an object to project Επιλέξτε ένα αντικείμενο προς προβολή Create 2D View Create 2D View Create Point Δημιουργία Σημείου %1 pick point %1 σημείο επιλογής Select an object to rotate Select an object to rotate Pick rotation center Επιλέξτε κέντρο περιστροφής Base angle Base angle The base angle to start the rotation from The base angle to start the rotation from The amount of rotation to perform. The final angle will be the base angle plus this amount. The amount of rotation to perform. The final angle will be the base angle plus this amount. Pick base angle Pick base angle Rotation Περιστροφή Pick rotation angle Επιλέξτε γωνία περιστροφής Add to New Group Προσθήκη σε νέα ομάδα Add to Group Προσθήκη σε ομάδα No new selection. Select non-empty groups or objects inside groups. No new selection. Select non-empty groups or objects inside groups. New Layer New Layer Layer name Layer name Layer Object label Layer New layer New layer Add to Construction Group Add to Construction Group New Group Νέα ομάδα Group name Όνομα ομάδας Group Object label Ομάδα New named group New named group Ungroup Ungroup Group Ομάδα Fillet radius Fillet radius Radius of the fillet Radius of the fillet Enter radius Enter radius Create Fillet Create Fillet Fillet cannot be created Fillet cannot be created Polygon Πολύγωνο Create Polygon (Part) Create Polygon (Part) Create Polygon Create Polygon Select objects to trim or extend Select objects to trim or extend This object is not supported This object is not supported Only a single face can be extruded Only a single face can be extruded Trimex does not support this object type Trimex does not support this object type Unable to trim these objects, only Draft wires and arcs are supported Unable to trim these objects, only Draft wires and arcs are supported These objects do not intersect These objects do not intersect Too many intersection points Too many intersection points Offset only works on one object at a time Offset only works on one object at a time Offset of Bézier curves is currently not supported Offset of Bézier curves is currently not supported Pick distance Επιλέξτε απόσταση Offset angle Offset angle Unable to trim these objects, too many wires Unable to trim these objects, too many wires B-Spline B-Spline Create B-Spline Create B-Spline Change Style Αλλαγή στυλ This object does not support possible coincident points This object does not support possible coincident points Delete Point Διαγραφή σημείου Add Point Προσθήκη σημείου Open Wire Open Wire Close Wire Close Wire Reverse Wire Reverse Wire Active object must have more than 2 points or nodes Active object must have more than 2 points or nodes Open Spline Open Spline Close Spline Close Spline Reverse Spline Reverse Spline Move Arc Move Arc Set First Angle Set First Angle Set Last Angle Set Last Angle Set Radius Set Radius Invert Arc Invert Arc Make Sharp Make Sharp Make Tangent Make Tangent Make Symmetric Make Symmetric Reverse Curve Reverse Curve Open Curve Open Curve Close Curve Close Curve Selection is not a knot Selection is not a knot Endpoint of Bézier curve cannot be smoothed Endpoint of Bézier curve cannot be smoothed Active object must have more than two points/nodes Active object must have more than two points/nodes Bézier Curve Bézier Curve Create Bézier Curve Create Bézier Curve Cubic Bézier Curve Cubic Bézier Curve Click and drag to define next knot Click and drag to define next knot %1 click and drag to define first point and knot %1 click and drag to define first point and knot %1 click and drag to define next point and knot %1 click and drag to define next point and knot Ellipse Έλλειψη Create Ellipse Create Ellipse Pick opposite point Pick opposite point %1 pick opposite point %1 pick opposite point Select faces from existing objects Select faces from existing objects Select an object to scale Select an object to scale Pick base point Pick base point Pick reference distance from base point Pick reference distance from base point Zero scale factor not allowed Zero scale factor not allowed Scale Κλίμακα Pick new distance from base point Pick new distance from base point Layer Layer Create Dimension Create Dimension Edge too short! Edge too short! Select an object to stretch Select an object to stretch Pick first point of selection rectangle Pick first point of selection rectangle Pick the opposite point of the selection rectangle Pick the opposite point of the selection rectangle Turning a rectangle into a wire Turning a rectangle into a wire Pick start point of displacement Pick start point of displacement Pick end point of displacement Pick end point of displacement Stretch Stretch Rectangle Ορθογώνιο Create Plane Create Plane Create Rectangle Create Rectangle Select an object to mirror Select an object to mirror Pick start point of mirror line Pick start point of mirror line Mirror Mirror Pick end point of mirror line Pick end point of mirror line Select an object to clone Select an object to clone Cannot clone objects without a shape, aborting Cannot clone objects without a shape, aborting Cannot clone objects without a shape, skipping them Cannot clone objects without a shape, skipping them Select an object to upgrade Select an object to upgrade Upgrade Αναβάθμιση Select an object to offset Select an object to offset Cannot offset this object type Cannot offset this object type Pick ShapeString location point Pick ShapeString location point Create ShapeString Create ShapeString Heal Heal Downgrade Downgrade Object: Αντικείμενο: Polar Array Polar Array Number of elements must be at least 2 Ο αριθμός των στοιχείων (αντικειμένων) πρέπει να είναι τουλάχιστον 2 The angle is above 360 degrees. It is set to this value to proceed. The angle is above 360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. The angle is below -360 degrees. It is set to this value to proceed. Create Polar Array Create Polar Array Fuse: Fuse: Create Link array: Δημιουργία διάταξης συνδέσμων: Number of elements: Αριθμός στοιχείων: Polar angle: Polar angle: Center of rotation: Center of rotation: Orthogonal Array Orthogonal Array Number of elements must be at least 1 Ο αριθμός των στοιχείων (αντικειμένων) πρέπει να είναι τουλάχιστον 1 In linear mode, at least 1 axis must be selected In linear mode, at least 1 axis must be selected Create Orthogonal Array Create Orthogonal Array Create link array: Δημιουργία διάταξης συνδέσμων: Number of X elements: Αριθμός στοιχείων X: Interval X: Interval X: Number of Y elements: Αριθμός στοιχείων Υ: Interval Y: Interval Y: Number of Z elements: Αριθμός στοιχείων Ζ: Interval Z: Interval Z: Switch to Ortho Mode Switch to Ortho Mode X-Axis Άξονας X Y-Axis Άξονας Y Z-Axis Z-Axis Switch to Linear Mode Switch to Linear Mode Number of elements Αριθμός Στοιχείων Interval Interval ShapeString Πλαίσιο Συμβολοσειράς Κειμένου Default Προεπιλεγμένο Radial distance is zero. Resulting array may not look correct. Η ακτινική απόσταση είναι μηδέν. Η διάταξη που θα προκύψει ενδέχεται να μην είναι σωστή. Radial distance is negative. It is made positive to proceed. Η ακτινική απόσταση είναι αρνητική. Μετατράπηκε σε θετική για να συνεχιστεί η διαδικασία. Circular Array Κυκλική Διάταξη At least 1 element must be selected At least 1 element must be selected Number of layers must be at least 2 Number of layers must be at least 2 Selection is not suitable for array Selection is not suitable for array Tangential distance cannot be 0 Tangential distance cannot be 0 Tangential distance is negative. It is made positive to proceed. Tangential distance is negative. It is made positive to proceed. Create Circular Array Create Circular Array Radial distance: Ακτινική απόσταση: Tangential distance: Tangential distance: Number of concentric circles: Number of concentric circles: Symmetry parameter: Symmetry parameter: Font file not found Font file not found Specified font file is not a file Specified font file is not a file Specified font type is not supported Specified font type is not supported ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: string has no wires ShapeString: string has no wires ShapeString: face creation failed for one character ShapeString: face creation failed for one character , path object does not have 'Edges'. , path object does not have 'Edges'. Start Offset too large for path length. Using 0 instead. Start Offset too large for path length. Using 0 instead. End Offset too large for path length minus Start Offset. Using 0 instead. End Offset too large for path length minus Start Offset. Using 0 instead. Length of tangent vector is 0. Copy not aligned. Length of tangent vector is 0. Copy not aligned. Length of normal vector is 0. Using a default axis instead. Length of normal vector is 0. Using a default axis instead. Spacing unit of 0 is not allowed, using default Spacing unit of 0 is not allowed, using default Operation would generate too many objects. Aborting Operation would generate too many objects. Aborting Tangent and normal vectors are parallel. Normal replaced by a default axis. Tangent and normal vectors are parallel. Normal replaced by a default axis. Cannot calculate normal vector. Using the default normal instead. Cannot calculate normal vector. Using the default normal instead. AlignMode {} is not implemented AlignMode {} is not implemented No shape found Δεν βρέθηκε σχήμα All shapes must be planar All shapes must be planar Points: Σημεία: Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be a list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. Wrong input: must be list or tuple of 3 points exactly. Placement: Τοποθέτηση: Wrong input: incorrect type of placement. Wrong input: incorrect type of placement. Wrong input: incorrect type of points. Wrong input: incorrect type of points. Cannot generate shape: Αδυναμία δημιουργίας σχήματος: Wrong input: base_object not in document. Wrong input: base_object not in document. Wrong input: path_object not in document. Wrong input: path_object not in document. Wrong input: must be a number. Wrong input: must be a number. Wrong input: must be a vector. Wrong input: must be a vector. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be a number or vector. Wrong input: must be a number or vector. Input: single value expanded to vector. Input: single value expanded to vector. Wrong input: must be an integer number. Wrong input: must be an integer number. Input: number of elements must be at least 1. It is set to 1. Είσοδος: ο αριθμός των στοιχείων πρέπει να είναι τουλάχιστον 1. Ρυθμίστηκε αυτόματα στο 1. Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. Wrong input: target_object must not be a list. Wrong input: target_object must not be a list. Wrong input: target_object not in document. Wrong input: target_object not in document. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelements must be a list or tuple of strings, or a single string. Wrong input: subelement {} not in object. Wrong input: subelement {} not in object. Wrong input: label_type must be a string. Wrong input: label_type must be a string. Wrong input: label_type must be one of the following: Wrong input: label_type must be one of the following: Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. Wrong input: points {} must be a list of at least two vectors. Wrong input: points {} must be a list of at least two vectors. Direction is not 'Custom'; points won't be used. Direction is not 'Custom'; points won't be used. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. Wrong input: point_object not in document. Wrong input: point_object not in document. Wrong input: object has the wrong type. Wrong input: object has the wrong type. This function is deprecated. Do not use this function directly. This function is deprecated. Do not use this function directly. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object must not be a list or tuple. Wrong input: edge_object not in document. Wrong input: edge_object not in document. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object doesn't have a 'Shape' to measure. Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring. Wrong input: must be an integer. Wrong input: must be an integer. i1: values below 1 are not allowed; will be set to 1. i1: values below 1 are not allowed; will be set to 1. Wrong input: vertex not in object. Wrong input: vertex not in object. i2: values below 1 are not allowed; will be set to the last vertex in the object. i2: values below 1 are not allowed; will be set to the last vertex in the object. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. Wrong input: object doesn't have at least one element in 'Edges' to use for measuring. index: values below 1 are not allowed; will be set to 1. index: values below 1 are not allowed; will be set to 1. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to an edge in the object. Wrong input: index doesn't correspond to a circular edge. Wrong input: index doesn't correspond to a circular edge. Wrong input: must be a string, 'radius' or 'diameter'. Wrong input: must be a string, 'radius' or 'diameter'. Wrong input: must be a list with two angles. Wrong input: must be a list with two angles. Wrong input: must be a number or quantity. Wrong input: must be a number or quantity. Layers Layers Wrong input: it must be a string. Wrong input: it must be a string. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be a tuple of three floats 0.0 to 1.0. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. Wrong input: must be a number between 0 and 100. Wrong input: must be a number between 0 and 100. Edit Επεξεργασία Flatten Flatten Upgrade: Unknown force method: Upgrade: Unknown force method: Found 1 block: exploding it Found 1 block: exploding it Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it Found 1 parametric object: breaking its dependencies Found 1 parametric object: breaking its dependencies Downgrade: Unknown force method: Downgrade: Unknown force method: Found 1 array: exploding it Found 1 array: exploding it Found 2 objects: subtracting them Found 2 objects: subtracting them Found several faces: splitting them Found several faces: splitting them Found several faces: subtracting them from the first one Found several faces: subtracting them from the first one Unable to downgrade these objects Unable to downgrade these objects Found 1 face: extracting its wires Found 1 face: extracting its wires Found only wires: extracting their edges Found only wires: extracting their edges No object given Δεν δόθηκε αντικείμενο The two points are coincident The two points are coincident mirrored mirrored Found 1 solidifiable object: solidifying it Found 1 solidifiable object: solidifying it Found 2 objects: fusing them Found 2 objects: fusing them Found groups: closing open wires inside Found groups: closing open wires inside Found meshes: turning them into Part shapes Found meshes: turning them into Part shapes Found object with several coplanar faces: refining them Found object with several coplanar faces: refining them Found 1 closed sketch object: creating a face from it Found 1 closed sketch object: creating a face from it Found closed wires: creating faces Found closed wires: creating faces Found several wires or edges: wiring them Found several wires or edges: wiring them Found several non-treatable objects: creating compound Found several non-treatable objects: creating compound Unable to upgrade these objects Unable to upgrade these objects Found 1 open wire: closing it Found 1 open wire: closing it Found 1 non-parametric object: replacing it with a Draft object Found 1 non-parametric object: replacing it with a Draft object Found points: creating compound Found points: creating compound Text Κείμενο No Target No Target Invalid label type Invalid label type Tag not available for object Tag not available for object Material not available for object Material not available for object Position not available for (sub)object Position not available for (sub)object Length not available for (sub)object Length not available for (sub)object Area not available for (sub)object Area not available for (sub)object Volume not available for (sub)object Volume not available for (sub)object Opening Multiple Links Opening Multiple Links Multiple links found Multiple links found This may lead to the opening of various windows This may lead to the opening of various windows File not found: Το αρχείο δεν βρέθηκε: Opening hyperlink Opening hyperlink Select 3 vertices, one or more shapes or an object to define a working plane Select 3 vertices, one or more shapes or an object to define a working plane Do you want to update the SVG pattern options of existing objects in all opened documents? Do you want to update the SVG pattern options of existing objects in all opened documents? Sketch is too complex to edit: it is suggested to use the default Sketcher editor Sketch is too complex to edit: it is suggested to use the default Sketcher editor Create layer Create layer Remove From Layer Remove From Layer Add to New Layer Add to New Layer Remove from layer Remove from layer Add to new layer Add to new layer Add to layer Add to layer Layers change Layers change Flip Dimension Flip Dimension Toggle Grid Εναλλαγή Πλέγματος Change Slope Change Slope Select exactly 2 objects, the base object and the path object, before calling this command Select exactly 2 objects, the base object and the path object, before calling this command Create Path Array Create Path Array Create Path Twisted Array Create Path Twisted Array Select exactly 2 objects, the base object and the point object, before calling this command Select exactly 2 objects, the base object and the point object, before calling this command Create Point Array Create Point Array Click anywhere on a line to split it Click anywhere on a line to split it Split Line Split Line No active Draft toolbar No active Draft toolbar Construction Mode Construction Mode Toggle Display Mode Toggle Display Mode 2 edges are needed 2 edges are needed Edges are not connected or radius is too large Edges are not connected or radius is too large Unable to build facebinder Unable to build facebinder No valid faces for facebinder No valid faces for facebinder Unable to build facebinder, resuming with sew disabled Unable to build facebinder, resuming with sew disabled Converting flat B-spline faces of facebinder to planar faces failed Converting flat B-spline faces of facebinder to planar faces failed Activate Layer Activate Layer Reassign Properties of Layer Reassign Properties of Layer Select Layer Contents Select Layer Contents Add New Layer Add New Layer Reassign Properties of All Layers Reassign Properties of All Layers Merge Layer Duplicates Merge Layer Duplicates The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either allow FreeCAD to download these libraries: 1 - Load Draft workbench 2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads Or download these libraries manually, as explained on https://github.com/yorikvanhavre/Draft-dxf-importer To enabled FreeCAD to download these libraries, answer Yes. PAT file not found PAT file not found Specified PAT file is not a file Specified PAT file is not a file Specified file type is not supported Specified file type is not supported Pattern not found in PAT file Pattern not found in PAT file Workbench Draft Creation Draft Creation Draft Annotation Draft Annotation Draft Modification Draft Modification Draft Utility Draft Utility Draft Snap Draft Snap &Drafting &Drafting &Annotation & Σχολιασμός &Modification &Modification &Utilities &Utilities Arc Tools Arc Tools Bézier Tools Bézier Tools Array Tools Array Tools Draft Fillet Στρογγύλεμα Delete original objects Delete original objects Create chamfer Create chamfer Save style Αποθήκευση στυλ Name of this new style Όνομα αυτού του νέου στυλ Warning Προειδοποίηση Name exists. Overwrite? Το όνομα υπάρχει. Αντικατάσταση; Error: json module not found. Unable to load style Error: json module not found. Unable to load style Error: json module not found. Unable to save style Error: json module not found. Unable to save style Slope Slope True Αληθές False Ψευδές Scale Κλίμακα X-factor X-factor Y-factor Y-factor Z-factor Z-factor Uniform scaling Uniform scaling Copy Αντιγραφή Modify subelements Τροποποίηση υποστοιχείων Pick From/To Points Pick From/To Points Edit Scale Επεξεργασία κλίμακας Create a clone Δημιουργήστε κλώνο _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. Writing camera position Writing camera position Writing objects shown/hidden state Writing objects shown/hidden state On On Name Όνομα Line Width Line Width Draw Style Draw Style Line Color Χρώμα Γραμμής Face Color Face Color Line Print Color Line Print Color Transparency Διαφάνεια New Layer New Layer Custom Επιλογή Label Ετικέτα Position Θέση Length Μήκος Area Εμβαδόν Volume Όγκος Tag Ετικέτα Material Υλικό Label + Position Label + Position Label + Length Label + Length Label + Area Label + Area Label + Volume Label + Volume Label + Material Label + Material Create Clone Δημιουργία Κλώνου (Πιστό Αντίγραφο) Choose a base object before using this command Choose a base object before using this command Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. Offset direction is not defined. Move the mouse on either side of the object first to indicate a direction. Point object does not have a discrete point, it cannot be used for an array Point object does not have a discrete point, it cannot be used for an array Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager Download of DXF libraries failed. Please install the DXF Library addon manually from menu Tools → Addon Manager importOCA OCA: found no data to export OCA: found no data to export successfully exported εξήχθη επιτυχώς ImportAirfoilDAT Did not find enough coordinates Δεν βρέθηκαν αρκετές συντεταγμένες ImportSVG Unknown SVG export style, switching to Translated Unknown SVG export style, switching to Translated The export list contains no object with a valid bounding box The export list contains no object with a valid bounding box Draft_Label Label Ετικέτα Creates a label, optionally attached to a selected object or subelement Creates a label, optionally attached to a selected object or subelement Draft_Line Line Γραμμή Creates a 2-point line Creates a 2-point line Draft_Wire Polyline Πολλαπλές Γραμμές Creates a polyline Creates a polyline Draft_Hatch Hatch Hatch Creates hatches on the faces of a selected object Creates hatches on the faces of a selected object Draft_Join Join Συνένωση Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end. Draft_Text Text Κείμενο Creates a multi-line annotation Creates a multi-line annotation Draft_Move Move Μετακίνηση Moves the selected objects. If the "Copy" option is active, it creates displaced copies. Moves the selected objects. If the "Copy" option is active, it creates displaced copies. Draft_Arc Arc Τόξο Creates a circular arc from a center point and a radius Creates a circular arc from a center point and a radius Draft_Edit Edit Επεξεργασία Edits the active object Edits the active object Draft_Point Point Σημείο Creates a point Δημιουργεί ένα Σημείο Draft_Rotate Rotate Περιστροφή Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. Rotates the selected objects. If the "Copy" option is active, it will create rotated copies. Draft_Fillet Fillet Στρογγύλεμα Creates a fillet between 2 selected edges Creates a fillet between 2 selected edges Draft_Polygon Polygon Πολύγωνο Creates a regular polygon (triangle, square, pentagon…) Creates a regular polygon (triangle, square, pentagon…) Draft_Split Split Διαχωρισμός Splits the selected line or polyline at a specified point Splits the selected line or polyline at a specified point Draft_Trimex Trimex Trimex Trims or extends the selected object, or extrudes single faces Trims or extends the selected object, or extrudes single faces Draft_Circle Circle Κύκλος Creates a circle (full circular arc) Creates a circle (full circular arc) Draft_Ellipse Ellipse Έλλειψη Creates an ellipse Creates an ellipse Draft_Facebinder Facebinder Σύνθεση όψεων Creates a facebinder from the selected faces Creates a facebinder from the selected faces Draft_OrthoArray Array Array Creates copies of the selected object in an orthogonal pattern Creates copies of the selected object in an orthogonal pattern Draft_Scale Scale Κλίμακα Scales the selected objects from a base point Scales the selected objects from a base point Draft_Layer New Layer New Layer Adds a layer to the document. Objects added to this layer can share the same visual properties. Adds a layer to the document. Objects added to this layer can share the same visual properties. Draft_Dimension Dimension Διάσταση Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges Creates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edges Draft_Stretch Stretch Stretch Stretches the selected objects Stretches the selected objects Draft_Rectangle Rectangle Ορθογώνιο Creates a 2-point rectangle Creates a 2-point rectangle Draft_Mirror Mirror Mirror Mirrors the selected objects along a line defined by 2 points Mirrors the selected objects along a line defined by 2 points Draft_Clone Clone Πιστό Αντίγραφο Creates a clone of the selected objects Creates a clone of the selected objects Draft_Upgrade Upgrade Αναβάθμιση Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, convert closed edges into filled faces and parametric polygons, and merge faces into a single face. Draft_Offset Offset Μετατόπιση (Offset) Offsets the selected object. It can also create an offset copy of the original object. Offsets the selected object. It can also create an offset copy of the original object. Draft_Heal Heal Heal Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. Heals faulty Draft objects saved with an earlier version of FreeCAD. If an object is selected it tries to heal only that object, otherwise it tries to heal all objects in the active document. Draft_Downgrade Downgrade Downgrade Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be downgraded several times in a row. For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted. App::Property The placement of the base point of the first line The placement of the base point of the first line The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. Text string Text string Font file name Font file name Height of text Height of text Horizontal and vertical alignment Horizontal and vertical alignment Height reference used for justification Height reference used for justification Keep left margin and leading white space when justification is left Keep left margin and leading white space when justification is left Scale to ensure cap height is equal to size Scale to ensure cap height is equal to size Inter-character spacing Inter-character spacing Oblique (slant) angle Oblique (slant) angle Fill letters with faces Fill letters with faces Fuse faces if faces overlap, usually not required (can be very slow) Fuse faces if faces overlap, usually not required (can be very slow) The base object used by this object The base object used by this object The PAT file used by this object The PAT file used by this object The pattern name used by this object The pattern name used by this object The pattern scale used by this object The pattern scale used by this object The pattern rotation used by this object The pattern rotation used by this object If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) The objects included in this clone The objects included in this clone The scale factor of this clone The scale factor of this clone If Clones includes several objects, set True for fusion or False for compound If Clones includes several objects, set True for fusion or False for compound Always create a compound Always create a compound Start angle of the arc Start angle of the arc End angle of the arc (for a full circle, give it same value as First Angle) End angle of the arc (for a full circle, give it same value as First Angle) Radius of the circle Ακτίνα του κύκλου Create a face Create a face The area of this object The area of this object The objects that are part of this layer The objects that are part of this layer Number of faces Number of faces Radius of the control circle Radius of the control circle How the polygon must be drawn from the control circle How the polygon must be drawn from the control circle Radius to use to fillet the corners Radius to use to fillet the corners Size of the chamfer to give to the corners Size of the chamfer to give to the corners The base object that will be duplicated. The base object that will be duplicated. The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. Number of copies to create. Number of copies to create. Rotation factor of the twisted array. Rotation factor of the twisted array. Show the individual array elements (only for Link arrays) Εμφάνιση των μεμονωμένων στοιχείων της διάταξης (μόνο για διατάξεις συνδέσμων) The placement for each array element The placement for each array element The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. 'Target' won't be used if 'Label Type' is set to 'Custom'. Αντικείμενο και υποστοιχείο, του οποίου οι ιδιότητες θα εμφανίζονται ως "Κείμενο", ανάλογα με τον "Τύπος ετικέτας". Ο "Στόχος" δεν θα χρησιμοποιηθεί εάν ο "Τύπος ετικέτας" έχει οριστεί σε "Προσαρμοσμένο". The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', and the last point should be the tip of the line, that is, the 'Target Point'. The middle point is calculated automatically depending on the chosen 'Straight Direction' and the 'Straight Distance' value and sign. If 'Straight Direction' is set to 'Custom', the 'Points' property can be set as a list of arbitrary points. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by assigning a custom list to the 'Points' attribute. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn to the left or below the 'Text', otherwise to the right or above it, depending on the value of 'Straight Direction'. The placement of the 'Text' element in 3D space The placement of the 'Text' element in 3D space The text to display when 'Label Type' is set to 'Custom' The text to display when 'Label Type' is set to 'Custom' The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', and the object defined in 'Target'. The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like BIM objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. For other types, the string will be calculated automatically from the object defined in 'Target'. 'Tag' and 'Material' only work for objects that have these properties, like BIM objects. For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target', or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. The base object that will be duplicated The base object that will be duplicated List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment mode Number of copies to create Number of copies to create Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. Alignment vector for 'Tangent' mode Alignment vector for 'Tangent' mode Direction of the local Z axis when 'Force Vertical' is true Direction of the local Z axis when 'Force Vertical' is true Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. Walk the path backwards. Walk the path backwards. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. How copies are spaced. - Fixed count: available path length (minus start and end offsets) is evenly divided into n. - Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path. - Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies. Base fixed distance between elements. Base fixed distance between elements. Use repeating spacing patterns instead of uniform spacing. Use repeating spacing patterns instead of uniform spacing. Spacing is multiplied by a corresponding number in this sequence. Spacing is multiplied by a corresponding number in this sequence. Length from the start of the path to the first copy. Length from the start of the path to the first copy. Length from the end of the path to the last copy. Length from the end of the path to the last copy. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. The type of array to create. - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circles around the base object. Specifies if the copies should be fused together if they touch each other (slower) Specifies if the copies should be fused together if they touch each other (slower) Number of copies in X-direction Number of copies in X-direction Number of copies in Y-direction Number of copies in Y-direction Number of copies in Z-direction Number of copies in Z-direction Distance and orientation of intervals in X-direction Distance and orientation of intervals in X-direction Distance and orientation of intervals in Y-direction Distance and orientation of intervals in Y-direction Distance and orientation of intervals in Z-direction Distance and orientation of intervals in Z-direction The axis direction around which the elements in a polar or a circular array will be created The axis direction around which the elements in a polar or a circular array will be created Center point for polar and circular arrays. The 'Axis' passes through this point. Center point for polar and circular arrays. The 'Axis' passes through this point. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. Number of copies in the polar direction Number of copies in the polar direction Distance and orientation of intervals in 'Axis' direction Distance and orientation of intervals in 'Axis' direction Angle to cover with copies Angle to cover with copies Distance between concentric circles Distance between concentric circles Distance between copies in the same circle Distance between copies in the same circle Number of concentric circle. The 'Base' object counts as one circle. Number of concentric circle. The 'Base' object counts as one circle. A parameter that determines how many symmetry planes the circular array will have A parameter that determines how many symmetry planes the circular array will have Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. Συνολικός αριθμός στοιχείων στη διάταξη. Αυτή η ιδιότητα είναι μόνο για ανάγνωση, καθώς ο αριθμός εξαρτάται από τις παραμέτρους της διάταξης. Base object that will be duplicated Base object that will be duplicated Object containing points used to distribute the copies. Object containing points used to distribute the copies. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Number of copies in the array. This property is read-only, as the number depends on the points in 'Point Object'. Additional placement, shift and rotation, that will be applied to each copy Additional placement, shift and rotation, that will be applied to each copy The base object this 2D view must represent The base object this 2D view must represent The projection vector of this object The projection vector of this object The way the viewed object must be projected The way the viewed object must be projected The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode Show hidden lines Εμφανίστε τις κρυφές γραμμές Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments For Cutlines and Cutfaces modes, this leaves the faces at the cut location For Cutlines and Cutfaces modes, this leaves the faces at the cut location Length of line segments if tessellating Ellipses or B-splines into line segments Length of line segments if tessellating Ellipses or B-splines into line segments If this is True, this object will include only visible objects If this is True, this object will include only visible objects A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn. If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, only solid geometry is handled. This overrides the base object's Only Solids property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property This object will be recomputed only if this is True. This object will be recomputed only if this is True. The points of the Bezier curve The points of the Bezier curve The degree of the Bezier function The degree of the Bezier function Continuity Συνέχεια If the Bezier curve should be closed or not If the Bezier curve should be closed or not Create a face if this curve is closed Create a face if this curve is closed The length of this object The length of this object The placement of this object The placement of this object X Location X Location Y Location Y Location Z Location Z Location Start angle of the elliptical arc Start angle of the elliptical arc End angle of the elliptical arc (for a full circle, give it same value as First Angle) End angle of the elliptical arc (for a full circle, give it same value as First Angle) Minor radius of the ellipse Minor radius of the ellipse Major radius of the ellipse Major radius of the ellipse Area of this object Area of this object The start point of this line. The start point of this line. The end point of this line. The end point of this line. The length of this line. The length of this line. Radius to use to fillet the corner. Radius to use to fillet the corner. The normal direction of the text of the dimension The normal direction of the text of the dimension The object measured by this dimension The object measured by this dimension The object, and specific subelements of it, that this dimension is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. The object, and specific subelements of it, that this dimension is measuring. There are various possibilities: - An object, and one of its edges. - An object, and two of its vertices. - An arc object, and its edge. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. A point through which the dimension line, or an extrapolation of it, will pass. - For linear dimensions, this property controls how close the dimension line is to the measured object. - For radial dimensions, this controls the direction of the dimension line that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Starting point of the dimension line. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. Ending point of the dimension line. If it is a radius or diameter dimension it will be a point that lies on the arc. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. The value of the measurement. This property is read-only because the value is calculated from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. When measuring circular arcs, it determines whether to display the radius or the diameter value When measuring circular arcs, it determines whether to display the radius or the diameter value Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The center point of the dimension line, which is a circular arc. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. The value of the measurement. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. Length of the rectangle Length of the rectangle Height of the rectangle Height of the rectangle Horizontal subdivisions of this rectangle Horizontal subdivisions of this rectangle Vertical subdivisions of this rectangle Vertical subdivisions of this rectangle Linked faces Linked faces Specifies if splitter lines must be removed Specifies if splitter lines must be removed An optional extrusion value to be applied to all faces An optional extrusion value to be applied to all faces An optional offset value to be applied to all faces An optional offset value to be applied to all faces This specifies if the shapes sew This specifies if the shapes sew The area of the faces of this Facebinder The area of the faces of this Facebinder The components of this block The components of this block The vertices of the wire The vertices of the wire If the wire is closed or not If the wire is closed or not The base object is the wire, it's formed from 2 objects The base object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The tool object is the wire, it's formed from 2 objects The start point of this line The start point of this line The end point of this line The end point of this line The length of this line The length of this line Create a face if this object is closed Create a face if this object is closed The number of subdivisions of each edge The number of subdivisions of each edge The points of the B-spline The points of the B-spline If the B-spline is closed or not If the B-spline is closed or not Create a face if this B-spline is closed Create a face if this B-spline is closed Parameterization factor Parameterization factor Force sync pattern placements even when array elements are expanded Αναγκαστικός συγχρονισμός που εξασφαλίζει ότι όλα τα αντίγραφα θα παραμείνουν αυστηρά στις προκαθορισμένες θέσεις του μοτίβου (π. χ. στον κύκλο ή στη γραμμή), ακόμη και αν εσείς προσπαθήσετε να μετακινήσετε κάποιο μεμονωμένο στοιχείο από τη λίστα Show the individual array elements Εμφάνιση των μεμονωμένων στοιχείων της διάταξης, επιτρέποντας τον χρήστη να βλέπει και να διαχειρίζεται κάθε αντίγραφο της διάταξης ξεχωριστά μέσα στο δέντρο εργασιών Text color Χρώμα κειμένου Line spacing (relative to font size) Line spacing (relative to font size) Vertical alignment Vertical alignment Maximum number of characters on each line of the text box Maximum number of characters on each line of the text box Horizontal alignment Horizontal alignment The type of frame around the text of this object The type of frame around the text of this object Display a leader line or not Display a leader line or not Line width Πλάτος γραμμής Line color Χρώμα γραμμής Defines an SVG pattern. Defines an SVG pattern. Defines the size of the SVG pattern. Defines the size of the SVG pattern. If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the objects contained within this layer will adopt the shape appearance of the layer If it is true, the print color will be used when objects in this layer are placed on a TechDraw page If it is true, the print color will be used when objects in this layer are placed on a TechDraw page The line color of the objects contained within this layer The line color of the objects contained within this layer The shape color of the objects contained within this layer The shape color of the objects contained within this layer The shape appearance of the objects contained within this layer The shape appearance of the objects contained within this layer The line width of the objects contained within this layer The line width of the objects contained within this layer The draw style of the objects contained within this layer The draw style of the objects contained within this layer The transparency of the objects contained within this layer The transparency of the objects contained within this layer The line color of the objects contained within this layer, when used on a TechDraw page The line color of the objects contained within this layer, when used on a TechDraw page Font name Όνομα γραμματοσειράς Font size Μέγεθος γραμματοσειράς Spacing between text and dimension line Spacing between text and dimension line Rotate the dimension text 180 degrees Rotate the dimension text 180 degrees Text Position. Leave '(0,0,0)' for automatic position Text Position. Leave '(0,0,0)' for automatic position Text override. Write '$dim' so that it is replaced by the dimension length. Text override. Write '$dim' so that it is replaced by the dimension length. The number of decimals to show The number of decimals to show Show the unit suffix Show the unit suffix A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation Arrow size Μέγεθος βέλους Arrow type Τύπος βέλους Rotate the dimension arrows 180 degrees Rotate the dimension arrows 180 degrees The distance the dimension line is extended past the extension lines The distance the dimension line is extended past the extension lines Length of the extension lines Μήκος των γραμμών επέκτασης Length of the extension line beyond the dimension line Length of the extension line beyond the dimension line Shows the dimension line and arrows Shows the dimension line and arrows The display length of this section plane The display length of this section plane The size of the arrows of this section plane The size of the arrows of this section plane Defines a texture image (overrides hatch patterns) Defines a texture image (overrides hatch patterns) Command Transform Χειροκίνητη Μετακίνηση/Περιστροφή QObject Draft Προσχέδιο Import-Export Εισαγωγή-Εξαγωγή Draft_AnnotationStyleEditor Annotation Styles Annotation Styles Opens an editor to manage or create annotation styles Opens an editor to manage or create annotation styles Draft_Arc_3Points Arc From 3 Points Τόξο από 3 Σημεία Creates a circular arc from 3 points Creates a circular arc from 3 points Draft_ArcTools Arc Tools Arc Tools Tools to create various types of circular arcs Tools to create various types of circular arcs Draft_ArrayTools Array Tools Array Tools Tools to create various types of arrays, including rectangular, polar, circular, path, and point arrays Tools to create various types of arrays, including rectangular, polar, circular, path, and point arrays Draft_BezCurve Bézier Curve Bézier Curve Creates an n-degree Bézier curve. The more points, the higher the degree. Creates an n-degree Bézier curve. The more points, the higher the degree. Draft_CubicBezCurve Cubic Bézier Curve Cubic Bézier Curve Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments. Control points and properties of each knot can be edited after creation. Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments. Control points and properties of each knot can be edited after creation. Draft_BezierTools Bézier Tools Bézier Tools Tools to create various types of Bézier curves Tools to create various types of Bézier curves Draft_CircularArray Circular Array Κυκλική Διάταξη Creates copies of the selected object in a radial pattern with 1 or more circular layers Creates copies of the selected object in a radial pattern with 1 or more circular layers Draft_FlipDimension Flip Dimension Flip Dimension Flips the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Flips the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. Draft_Draft2Sketch Draft to Sketch Draft to Sketch Converts bidirectionally between Draft objects and sketches. Multiple selected Draft objects are converted into a single sketch. However, a single sketch with disconnected traces is converted into several individual Draft objects. Converts bidirectionally between Draft objects and sketches. Multiple selected Draft objects are converted into a single sketch. However, a single sketch with disconnected traces is converted into several individual Draft objects. Draft_ToggleGrid Toggle Grid Εναλλαγή Πλέγματος Toggles the visibility of the Draft grid Toggles the visibility of the Draft grid Draft_AddToGroup Add to Group Προσθήκη σε ομάδα Adds selected objects to a group, or removes them from any group Adds selected objects to a group, or removes them from any group Draft_SelectGroup Select Group Επιλογή ομάδας Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected. Draft_AutoGroup Auto-Group Auto-Group Adds new Draft and BIM objects to the selected layer or group Adds new Draft and BIM objects to the selected layer or group Draft_AddConstruction Add to Construction Group Add to Construction Group Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it does not exist. Adds the selected objects to the construction group, and changes their appearance to the construction style. The construction group is created if it does not exist. Draft_AddNamedGroup New Named Group New Named Group Adds a group with a given name Adds a group with a given name Draft_Hyperlink Open Links Άνοιγμα συνδέσμων Opens linked documents Άνοιγμα συνδεδεμένων εγγράφων Draft_AddToLayer Add to Layer Add to Layer Adds selected objects to a layer, or removes them from any layer Adds selected objects to a layer, or removes them from any layer Draft_LayerManager Manage Layers Manage Layers Allows to modify the layers Allows to modify the layers Draft_Slope Set Slope Set Slope Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn on the XY-plane. Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn on the XY-plane. Draft_PathArray Path Array Path Array Creates copies of the selected object along a selected path Creates copies of the selected object along a selected path Draft_PathLinkArray Path Link Array Διάταξη Συνδέσμων σε Διαδρομή Creates linked copies of the selected object along a selected path Είναι η λειτουργία που παίρνει ένα αντικείμενο και το «αντιγράφει» επανειλημμένα πάνω σε μια γραμμή ή καμπύλη που εσείς έχετε ορίσει Draft_PathTwistedArray Twisted Path Array Twisted Path Array Creates twisted copies of the selected object along a selected path Creates twisted copies of the selected object along a selected path Draft_PathTwistedLinkArray Twisted Path Link Array Διάταξη Συνδέσμων σε Ελικοειδή Διαδρομή Creates twisted linked copies of the selected object along a selected path Πρόκειται για μια λειτουργία που παίρνει ένα αντικείμενο και, καθώς το τοποθετεί πάνω σε μια γραμμή, το περιστρέφει (στρίβει) ταυτόχρονα γύρω από αυτήν Draft_WorkingPlaneProxy Working Plane Proxy Working Plane Proxy Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objects Creates a proxy object from the current working plane that allows to restore the camera position and visibility of objects Draft_PointArray Point Array Point Array Creates copies of the selected object at the points of a point object Creates copies of the selected object at the points of a point object Draft_PointLinkArray Point Link Array Διάταξη Συνδέσμων σε Σημεία Creates linked copies of the selected object at the points of a point object Πρόκειται για μια λειτουργία που «διαβάζει» τις θέσεις από μια ομάδα σημείων και τοποθετεί αυτόματα ένα αντίγραφο του αντικειμένου σας σε κάθε ένα από αυτά τα σημεία Draft_PolarArray Polar Array Polar Array Creates copies of the selected object in a polar pattern Creates copies of the selected object in a polar pattern Draft_SelectPlane Working Plane Working Plane Defines the working plane from 3 vertices, 1 or more shapes, or an object Defines the working plane from 3 vertices, 1 or more shapes, or an object Draft_SetStyle Set Style Set Style Sets the default style and can apply the style to objects Sets the default style and can apply the style to objects Draft_Shape2DView Shape 2D View Shape 2D View Creates a 2D projection of the selected objects on the XY-plane. The initial projection direction is the opposite of the current active view direction. Creates a 2D projection of the selected objects on the XY-plane. The initial projection direction is the opposite of the current active view direction. Draft_ShapeString Shape From Text Shape From Text Creates a shape from a text string and a specified font Creates a shape from a text string and a specified font Draft_Snap_Lock Snap Lock Snap Lock Enables or disables snapping globally Enables or disables snapping globally Draft_Snap_Midpoint Snap Midpoint Snap Midpoint Snaps to the midpoint of edges Snaps to the midpoint of edges Draft_Snap_Perpendicular Snap Perpendicular Snap Perpendicular Snaps to the perpendicular points on faces and edges Snaps to the perpendicular points on faces and edges Draft_Snap_Grid Snap Grid Snap Grid Snaps to the intersections of grid lines Snaps to the intersections of grid lines Draft_Snap_Intersection Snap Intersection Snap Intersection Snaps to the intersection of 2 edges, and the intersection of a face and an edge Snaps to the intersection of 2 edges, and the intersection of a face and an edge Draft_Snap_Parallel Snap Parallel Snap Parallel Snaps to an imaginary line parallel to straight edges Snaps to an imaginary line parallel to straight edges Draft_Snap_Endpoint Snap Endpoint Snap Endpoint Snaps to the endpoints of edges Snaps to the endpoints of edges Draft_Snap_Angle Snap Angle Snap Angle Snaps to the special cardinal points on circular edges, at multiples of 30° and 45° Snaps to the special cardinal points on circular edges, at multiples of 30° and 45° Draft_Snap_Center Snap Center Snap Center Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building parts Snaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building parts Draft_Snap_Extension Snap Extension Snap Extension Snaps to an imaginary line that extends beyond the endpoints of straight edges Snaps to an imaginary line that extends beyond the endpoints of straight edges Draft_Snap_Near Snap Near Snap Near Snaps to the nearest point on faces and edges Snaps to the nearest point on faces and edges Draft_Snap_Ortho Snap Ortho Snap Ortho Snaps to imaginary lines that cross the previous point at multiples of 45° Έλξη σε νοητές γραμμές που διέρχονται από το προηγούμενο σημείο σε πολλαπλάσια των 45°. Όταν σχεδιάζεις μια γραμμή, σε βοηθάει να την "κλειδώσεις" αυτόματα σε συγκεκριμένες γωνίες (0°, 45°, 90°, 135° κ. λπ.) σε σχέση με το σημείο που έκανες κλικ πριν Draft_Snap_Special Snap Special Snap Special Snaps to special points defined by the object Snaps to special points defined by the object Draft_Snap_Dimensions Snap Dimensions Snap Dimensions Shows temporary X and Y dimensions Shows temporary X and Y dimensions Draft_Snap_WorkingPlane Snap Working Plane Snap Working Plane Projects snap points onto the current working plane Projects snap points onto the current working plane Draft_ShowSnapBar Show Snap Toolbar Show Snap Toolbar Shows the snap toolbar if it is hidden Shows the snap toolbar if it is hidden Draft_BSpline B-Spline B-Spline Creates a multiple-point B-spline Creates a multiple-point B-spline Draft_ApplyStyle Apply Current Style Apply Current Style Applies the current style to the selected objects and groups Applies the current style to the selected objects and groups Draft_SubelementHighlight Highlight Subelements Highlight Subelements Highlights the subelements of the selected objects, to be able to move, rotate, and scale them Highlights the subelements of the selected objects, to be able to move, rotate, and scale them Draft_ToggleConstructionMode Toggle Construction Mode Toggle Construction Mode Toggles the construction mode Toggles the construction mode Draft_ToggleDisplayMode Toggle Wireframe Toggle Wireframe Switches the view style of the selected objects from Flat Lines to Wireframe and back Switches the view style of the selected objects from Flat Lines to Wireframe and back Draft_WireToBSpline Convert Wire/B-Spline Convert Wire/B-Spline Converts the selected polyline to a B-spline, or the selected B-spline to a polyline Converts the selected polyline to a B-spline, or the selected B-spline to a polyline DxfImportDialog DXF Import Εισαγωγή DXF Import As Εισαγωγή ως Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Creates fully parametric Draft objects. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for full integration with the Draft workbench. Editable Draft objects Editable Draft objects Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing. Creates parametric Part objects (e.g., Part::Line, Part::Circle). Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Best for script-based post-processing. Editable Part primitives Editable Part primitives Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Creates a non-parametric shape for each DXF entity. Block definitions are imported as reusable objects (Part Compounds) and instances become `App::Link` objects, maintaining the block structure. Good for referencing and measuring. Individual Part shapes (recommended) Individual Part shapes (recommended) Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for viewing very large files with maximum performance. Merges all geometry per layer into a single, non-editable shape. Block structures are not preserved; their geometry becomes part of the layer's shape. Best for viewing very large files with maximum performance. Fused Part shapes (fastest) Fused Part shapes (fastest) File summary Σύνοψη αρχείου Warning Προειδοποίηση Do not show this dialog again Να μην εμφανιστεί ξανά αυτός ο διάλογος