App::PropertyThe start point of this line.The start point of this line.The end point of this line.The end point of this line.The length of this line.The length of this line.Radius to use to fillet the corner.Radius to use to fillet the corner.The base object that will be duplicatedThe base object that will be duplicatedThe type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.Specifies if the copies should be fused together if they touch each other (slower)Specifies if the copies should be fused together if they touch each other (slower)Number of copies in X directionNumber of copies in X directionNumber of copies in Y directionNumber of copies in Y directionNumber of copies in Z directionNumber of copies in Z directionDistance and orientation of intervals in X directionDistance and orientation of intervals in X directionDistance and orientation of intervals in Y directionDistance and orientation of intervals in Y directionDistance and orientation of intervals in Z directionDistance and orientation of intervals in Z directionThe axis direction around which the elements in a polar or a circular array will be createdThe axis direction around which the elements in a polar or a circular array will be createdCenter point for polar and circular arrays.
The 'Axis' passes through this point.Center point for polar and circular arrays.
The 'Axis' passes through this point.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.Number of copies in the polar directionNumber of copies in the polar directionDistance and orientation of intervals in 'Axis' directionDistance and orientation of intervals in 'Axis' directionAngle to cover with copiesAngle to cover with copiesDistance between circular layersDistance between circular layersDistance between copies in the same circular layerDistance between copies in the same circular layerNumber of circular layers. The 'Base' object counts as one layer.Number of circular layers. The 'Base' object counts as one layer.A parameter that determines how many symmetry planes the circular array will have.A parameter that determines how many symmetry planes the circular array will have.Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Show the individual array elements (only for Link arrays)Show the individual array elements (only for Link arrays)The components of this blockThe components of this blockThe placement of this objectموضع هذا الكائنLength of the rectangleLength of the rectangleHeight of the rectangleHeight of the rectangleRadius to use to fillet the cornersRadius to use to fillet the cornersSize of the chamfer to give to the cornersSize of the chamfer to give to the cornersCreate a faceCreate a faceHorizontal subdivisions of this rectangleHorizontal subdivisions of this rectangleVertical subdivisions of this rectangleVertical subdivisions of this rectangleThe area of this objectThe area of this objectThe normal direction of the text of the dimensionThe normal direction of the text of the dimensionThe object measured by this dimension objectThe object measured by this dimension objectThe object, and specific subelements of it,
that this dimension object is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.
The object, and specific subelements of it,
that this dimension object is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.
A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.When measuring circular arcs, it determines whether to display
the radius or the diameter valueWhen measuring circular arcs, it determines whether to display
the radius or the diameter valueStarting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Starting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.The placement of the base point of the first lineThe placement of the base point of the first lineThe text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.Start angle of the arcStart angle of the arcEnd angle of the arc (for a full circle,
give it same value as First Angle)End angle of the arc (for a full circle,
give it same value as First Angle)Radius of the circleRadius of the circleNumber of facesNumber of facesRadius of the control circleRadius of the control circleHow the polygon must be drawn from the control circleHow the polygon must be drawn from the control circleX LocationX LocationY LocationY LocationZ LocationZ LocationThe objects that are part of this layerThe objects that are part of this layerThe position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.The position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The placement of the 'Text' element in 3D spaceThe placement of the 'Text' element in 3D spaceThe text to display when 'Label Type' is set to 'Custom'The text to display when 'Label Type' is set to 'Custom'The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.Text stringText stringFont file nameFont file nameHeight of textارتفاع النصInter-character spacingInter-character spacingShow the individual array elementsShow the individual array elementsBase object that will be duplicatedBase object that will be duplicatedObject containing points used to distribute the base object, for example, a sketch or a Part compound.
The sketch or compound must contain at least one explicit point or vertex object.Object containing points used to distribute the base object, for example, a sketch or a Part compound.
The sketch or compound must contain at least one explicit point or vertex object.Total number of elements in the array.
This property is read-only, as the number depends on the points contained within 'Point Object'.Total number of elements in the array.
This property is read-only, as the number depends on the points contained within 'Point Object'.Additional placement, shift and rotation, that will be applied to each copyAdditional placement, shift and rotation, that will be applied to each copyThe points of the B-splineThe points of the B-splineIf the B-spline is closed or notIf the B-spline is closed or notCreate a face if this spline is closedCreate a face if this spline is closedParameterization factorParameterization factorThe base object this 2D view must representThe base object this 2D view must representThe projection vector of this objectThe projection vector of this objectThe way the viewed object must be projectedThe way the viewed object must be projectedThe indices of the faces to be projected in Individual Faces modeThe indices of the faces to be projected in Individual Faces modeShow hidden linesإظهار الخطوط المخفيةFuse wall and structure objects of same type and materialFuse wall and structure objects of same type and materialTessellate Ellipses and B-splines into line segmentsTessellate Ellipses and B-splines into line segmentsStart angle of the elliptical arcStart angle of the elliptical arcEnd angle of the elliptical arc
(for a full circle, give it same value as First Angle)End angle of the elliptical arc
(for a full circle, give it same value as First Angle)Minor radius of the ellipseMinor radius of the ellipseMajor radius of the ellipseMajor radius of the ellipseArea of this objectArea of this objectThe points of the Bezier curveThe points of the Bezier curveThe degree of the Bezier functionThe degree of the Bezier functionContinuityاستمراريةIf the Bezier curve should be closed or notIf the Bezier curve should be closed or notCreate a face if this curve is closedCreate a face if this curve is closedThe length of this objectThe length of this objectThe object along which the copies will be distributed. It must contain 'Edges'.The object along which the copies will be distributed. It must contain 'Edges'.List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.List of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.Number of copies to createNumber of copies to createAdditional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Alignment vector for 'Tangent' modeAlignment vector for 'Tangent' modeForce use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment modeForce use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment modeDirection of the local Z axis when 'Force Vertical' is trueDirection of the local Z axis when 'Force Vertical' is trueMethod to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Method to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.The linked objectالكائن المرتبطProjection directionProjection directionThe width of the lines inside this objectThe width of the lines inside this objectThe size of the texts inside this objectحجم النصوص داخل هذا الكائنThe spacing between lines of textThe spacing between lines of textThe color of the projected objectsThe color of the projected objectsShape Fill StyleShape Fill StyleLine StyleLine StyleIf checked, source objects are displayed regardless of being visible in the 3D modelإذا تم تحديدها، يتم عرض مصدر الكائنات بغض النظر عن كونها مرئية في نموذج 3DLinked facesLinked facesSpecifies if splitter lines must be removedSpecifies if splitter lines must be removedAn optional extrusion value to be applied to all facesAn optional extrusion value to be applied to all facesAn optional offset value to be applied to all facesAn optional offset value to be applied to all facesThis specifies if the shapes sewThis specifies if the shapes sewThe area of the faces of this FacebinderThe area of the faces of this FacebinderThe objects included in this cloneThe objects included in this cloneThe scale factor of this cloneThe scale factor of this cloneIf Clones includes several objects,
set True for fusion or False for compoundIf Clones includes several objects,
set True for fusion or False for compoundGeneral scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.The vertices of the wireThe vertices of the wireIf the wire is closed or notIf the wire is closed or notThe base object is the wire, it's formed from 2 objectsThe base object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe start point of this lineThe start point of this lineThe end point of this lineThe end point of this lineThe length of this lineThe length of this lineCreate a face if this object is closedCreate a face if this object is closedThe number of subdivisions of each edgeThe number of subdivisions of each edgeFont nameاسم الخطFont sizeحجم الخطSpacing between text and dimension lineSpacing between text and dimension lineRotate the dimension text 180 degreesRotate the dimension text 180 degreesText Position.
Leave '(0,0,0)' for automatic positionText Position.
Leave '(0,0,0)' for automatic positionText override.
Write '$dim' so that it is replaced by the dimension length.Text override.
Write '$dim' so that it is replaced by the dimension length.The number of decimals to showThe number of decimals to showShow the unit suffixعرض لاحقة الوحدةArrow sizeحجم السهمArrow typeنوع السهمRotate the dimension arrows 180 degreesRotate the dimension arrows 180 degreesThe distance the dimension line is extended
past the extension linesThe distance the dimension line is extended
past the extension linesLength of the extension linesLength of the extension linesLength of the extension line
beyond the dimension lineLength of the extension line
beyond the dimension lineShows the dimension line and arrowsShows the dimension line and arrowsIf it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageThe line color of the objects contained within this layerThe line color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape color of the objects contained within this layerThe line width of the objects contained within this layerThe line width of the objects contained within this layerThe draw style of the objects contained within this layerThe draw style of the objects contained within this layerThe transparency of the objects contained within this layerThe transparency of the objects contained within this layerThe line color of the objects contained within this layer, when used on a TechDraw pageThe line color of the objects contained within this layer, when used on a TechDraw pageLine widthعرض الخطLine colorلون الخطThe size of the textThe size of the textThe font of the textThe font of the textThe vertical alignment of the textThe vertical alignment of the textText colorText colorLine spacing (relative to font size)Line spacing (relative to font size)The maximum number of characters on each line of the text boxThe maximum number of characters on each line of the text boxThe size of the arrowThe size of the arrowThe type of arrow of this labelThe type of arrow of this labelThe type of frame around the text of this objectThe type of frame around the text of this objectDisplay a leader line or notDisplay a leader line or notThe base object that will be duplicated.The base object that will be duplicated.Number of copies to create.Number of copies to create.Rotation factor of the twisted array.Rotation factor of the twisted array.Fill letters with facesFill letters with facesA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationA list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion points. Any edge touching any of those points will not be drawn.For Cutlines and Cutfaces modes,
this leaves the faces at the cut locationFor Cutlines and Cutfaces modes,
this leaves the faces at the cut locationLength of line segments if tessellating Ellipses or B-splines
into line segmentsLength of line segments if tessellating Ellipses or B-splines
into line segmentsIf this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyIf this is True, this object will include only visible objectsIf this is True, this object will include only visible objectsThis object will be recomputed only if this is True.This object will be recomputed only if this is True.The shape of this objectهيئة هذا العنصرThe base object used by this objectThe base object used by this objectThe PAT file used by this objectThe PAT file used by this objectThe pattern name used by this objectThe pattern name used by this objectThe pattern scale used by this objectThe pattern scale used by this objectThe pattern rotation used by this objectThe pattern rotation used by this objectIf set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)If it is true, the objects contained within this layer will adopt the shape color of the layerIf it is true, the objects contained within this layer will adopt the shape color of the layerDialogAnnotation Styles Editorمحرر أنماط الشرحStyle nameاسم النمطAdd new...إضافة جديدة...Renames the selected styleإعادة تسمية العنصر المحددRenameإعادة التسميةDeletes the selected styleحذف العنصر المحددDeleteحذفTextنصFont sizeحجم الخطLine spacingتباعد الأسطرFont nameاسم الخطThe font to use for texts and dimensionsالخط المراد استخدامه للنصوص والأبعادUnitsالوحداتScale multiplierمضاعفات الحجمDecimalsعشريUnit overrideتجاوز الوحدةShow unitعرض الوحداتLine and arrowsخطوط وأسهمLine widthعرض الخطExtension overshootتجاوز الإضافاتArrow sizeحجم السهمShow linesإظهار الخطوطDimension overshootتجاوز الأبعادExtension linesخطوط التمديدArrow typeنوع السهمLine / text colorلون الخط/النصThe width of the dimension linesعرض خطوط الأبعادpxpxThe color of dimension lines, arrows and textsلون خطوط الأبعاد والأسهم والنصوصDotنقطةArrowسهمTickIoThe name of your style. Existing style names can be edited.اسم النمط الخاص بك. يمكن تعديل أسماء النمط الموجودة مسبقًا.Font size in the system unitsحجم الخط في وحدات النظامLine spacing in system unitsتباعد الأسطر في وحدات النظامA multiplier factor that affects the size of texts and markersعامل مضاعف يؤثر على حجم النصوص والعلاماتThe number of decimals to show for dimension valuesعدد المنازل العشرية المراد عرضها لقيم الأبعادSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitحدد وحدة طول مثل مم، متر، انش، قدم، لعرض قيمة البعد في هذه الوحدةIf it is checked it will show the unit next to the dimension valueIf it is checked it will show the unit next to the dimension valueThe distance that the extension lines are additionally extended beyond the dimension lineThe distance that the extension lines are additionally extended beyond the dimension lineThe size of the dimension arrows or markers in system unitsThe size of the dimension arrows or markers in system unitsIf it is checked it will display the dimension lineIf it is checked it will display the dimension lineThe distance that the dimension line is additionally extendedThe distance that the dimension line is additionally extendedThe length of the extension linesThe length of the extension linesThe type of arrows or markers to use at the end of dimension linesThe type of arrows or markers to use at the end of dimension linesCircleدائرةTick-2Tick-2Import styles from json fileImport styles from json fileExport styles to json fileExport styles to json fileDraftDownload of dxf libraries failed.
Please install the dxf Library addon manually
from menu Tools -> Addon Managerيتعذر تحميل مكتبات الـ dxf.
المرجو تتبيث إضافة مكتبة الـ dxf يدويا
من خلال قائمة الأدوات -> مدير الإضافاتDraft creation toolsDraft creation toolsDraft annotation toolsDraft annotation toolsDraft modification toolsDraft modification toolsDraft utility toolsDraft utility tools&Draftingمسودة&Annotation& تعليق توضيحي&Modification&Modification&Utilities&UtilitiesDraftمسودةImport-Exportإستيراد-تصديرPoint object doesn't have a discrete point, it cannot be used for an array.Point object doesn't have a discrete point, it cannot be used for an array._BSpline.createGeometry: Closed with same first/last Point. Geometry not updated._BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.Writing camera positionكتابة موضع الكاميراWriting objects shown/hidden stateWriting objects shown/hidden stateMerge layer duplicatesMerge layer duplicatesAdd new layerAdd new layerToggles Grid On/OffToggles Grid On/OffObject snappingObject snappingToggles Visual Aid Dimensions On/OffToggles Visual Aid Dimensions On/OffToggles Ortho On/OffToggles Ortho On/OffToggles Constrain to Working Plane On/OffToggles Constrain to Working Plane On/OffUnable to insert new object into a scaled partUnable to insert new object into a scaled partTrueصحيحFalseخطأScaleالسلمX factorX factorY factorY factorZ factorZ factorUniform scalingUniform scalingWorking plane orientationWorking plane orientationCopyنسخModify subelementsModify subelementsPick from/to pointsPick from/to pointsCreate a cloneإنشاء استنساخCloneاستنساخSlopeSlopeCircular arrayCircular arrayCreates copies of the selected object, and places the copies in a radial pattern
creating various circular layers.
The array can be turned into an orthogonal or a polar array by changing its type.Creates copies of the selected object, and places the copies in a radial pattern
creating various circular layers.
The array can be turned into an orthogonal or a polar array by changing its type.Polar arrayPolar arrayCreates copies of the selected object, and places the copies in a polar pattern
defined by a center of rotation and its angle.
The array can be turned into an orthogonal or a circular array by changing its type.Creates copies of the selected object, and places the copies in a polar pattern
defined by a center of rotation and its angle.
The array can be turned into an orthogonal or a circular array by changing its type.Array toolsArray toolsCreate various types of arrays, including rectangular, polar, circular, path, and pointCreate various types of arrays, including rectangular, polar, circular, path, and pointArrayمصفوفةCreates copies of the selected object, and places the copies in an orthogonal pattern,
meaning the copies follow the specified direction in the X, Y, Z axes.
The array can be turned into a polar or a circular array by changing its type.Creates copies of the selected object, and places the copies in an orthogonal pattern,
meaning the copies follow the specified direction in the X, Y, Z axes.
The array can be turned into a polar or a circular array by changing its type.Filletتنعيم الحافةCreates a fillet between two selected wires or edges.Creates a fillet between two selected wires or edges.Delete original objectsDelete original objectsCreate chamferCreate chamferOffset direction is not defined. Please move the mouse on either side of the object first to indicate a directionOffset direction is not defined. Please move the mouse on either side of the object first to indicate a directionSave styleSave styleName of this new style:Name of this new style:Name exists. Overwrite?Name exists. Overwrite?Error: json module not found. Unable to save styleError: json module not found. Unable to save styleWarningWarningYou must choose a base object before using this commandYou must choose a base object before using this commandDraftCircularArrayTaskPanelCircular arrayCircular arrayThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Center of rotationCenter of rotationZZXXYYReset the coordinates of the center of rotation.Reset the coordinates of the center of rotation.Reset pointReset pointIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseصهرIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayLink arrayDistance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Tangential distanceTangential distanceDistance from one layer of objects to the next layer of objects.Distance from one layer of objects to the next layer of objects.Radial distanceRadial distanceThe number of symmetry lines in the circular array.The number of symmetry lines in the circular array.Number of circular layers or rings to create, including a copy of the original object.
It must be at least 2.Number of circular layers or rings to create, including a copy of the original object.
It must be at least 2.Number of circular layersNumber of circular layersSymmetryالتماثل(Placeholder for the icon)(Placeholder for the icon)DraftOrthoArrayTaskPanelOrthogonal arrayOrthogonal arrayDistance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Z intervalsZ intervalsZZYYXXReset the distances.Reset the distances.Reset ZReset ZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseصهرIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayLink array(Placeholder for the icon)(Placeholder for the icon)Distance between the elements in the X direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the X direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.X intervalsX intervalsReset XReset XDistance between the elements in the Y direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Distance between the elements in the Y direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Y intervalsY intervalsReset YReset YNumber of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.Number of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.Number of elementsNumber of elementsDraftPolarArrayTaskPanelPolar arrayPolar arrayThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.The coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Center of rotationCenter of rotationZZXXYYReset the coordinates of the center of rotation.Reset the coordinates of the center of rotation.Reset pointReset pointIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.If checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseصهرIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.If checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayLink arraySweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Sweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Polar anglePolar angleNumber of elements in the array, including a copy of the original object.
It must be at least 2.Number of elements in the array, including a copy of the original object.
It must be at least 2.Number of elementsNumber of elements(Placeholder for the icon)(Placeholder for the icon)DraftShapeStringGuiShapeStringShapeStringText to be made into ShapeStringText to be made into ShapeStringStringسلسلةHeightالارتفاعHeight of the resultHeight of the resultXXYYZZFont fileFont fileEnter coordinates or select point with mouse.Enter coordinates or select point with mouse.Reset 3d point selectionReset 3d point selectionReset Pointإعادة تعيين النقطةDraft_AddConstructionAdd to Construction groupAdd to Construction groupAdds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.Adds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.Draft_AddPointAdd pointAdd pointAdds a point to an existing Wire or B-spline.Adds a point to an existing Wire or B-spline.Draft_AddToGroupUngroupUngroupMove to groupMove to groupMoves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.Moves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.Draft_AnnotationStyleEditorAnnotation styles...Annotation styles...Draft_ApplyStyleApply current styleApply current styleApplies the current style defined in the toolbar (line width and colors) to the selected objects and groups.Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups.Draft_ArcArcقوسCreates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.Creates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.Draft_ArcToolsArc toolsArc toolsCreate various types of circular arcs.Create various types of circular arcs.Draft_ArrayArrayمصفوفةCreates an array from a selected object.
By default, it is a 2x2 orthogonal array.
Once the array is created its type can be changed
to polar or circular, and its properties can be modified.Creates an array from a selected object.
By default, it is a 2x2 orthogonal array.
Once the array is created its type can be changed
to polar or circular, and its properties can be modified.Draft_AutoGroupAutogroupتجميع تلقائىSelect a group to add all Draft and Arch objects to.Select a group to add all Draft and Arch objects to.Draft_BSplineB-splineB-splineCreates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.Draft_BezCurveBezier curveBezier curveCreates an N-degree Bezier curve. The more points you pick, the higher the degree.
CTRL to snap, SHIFT to constrain.Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
CTRL to snap, SHIFT to constrain.Draft_BezierToolsBezier toolsBezier toolsCreate various types of Bezier curves.Create various types of Bezier curves.Draft_CircleCircleدائرةCreates a circle (full circular arc).
CTRL to snap, ALT to select tangent objects.Creates a circle (full circular arc).
CTRL to snap, ALT to select tangent objects.Draft_CloneCloneاستنساخCreates a clone of the selected objects.
The resulting clone can be scaled in each of its three directions.Creates a clone of the selected objects.
The resulting clone can be scaled in each of its three directions.Draft_CloseLineClose LineClose LineCloses the line being drawn, and finishes the operation.Closes the line being drawn, and finishes the operation.Draft_CubicBezCurveCubic bezier curveCubic bezier curveCreates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
After the curve is created you can go back to edit each control point and set the properties of each knot.
CTRL to snap, SHIFT to constrain.Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
After the curve is created you can go back to edit each control point and set the properties of each knot.
CTRL to snap, SHIFT to constrain.Draft_DelPointRemove pointRemove pointRemoves a point from an existing Wire or B-spline.Removes a point from an existing Wire or B-spline.Draft_DimensionDimensionالبعدCreates a dimension.
- Pick three points to create a simple linear dimension.
- Select a straight line to create a linear dimension linked to that line.
- Select an arc or circle to create a radius or diameter dimension linked to that arc.
- Select two straight lines to create an angular dimension between them.
CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
You may select a single line or single circular arc before launching this command
to create the corresponding linked dimension.
You may also select an 'App::MeasureDistance' object before launching this command
to turn it into a 'Draft Dimension' object.Creates a dimension.
- Pick three points to create a simple linear dimension.
- Select a straight line to create a linear dimension linked to that line.
- Select an arc or circle to create a radius or diameter dimension linked to that arc.
- Select two straight lines to create an angular dimension between them.
CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
You may select a single line or single circular arc before launching this command
to create the corresponding linked dimension.
You may also select an 'App::MeasureDistance' object before launching this command
to turn it into a 'Draft Dimension' object.Draft_DowngradeDowngradeDowngradeDowngrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.Downgrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.Draft_Draft2SketchDraft to SketchDraft to SketchConvert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.Convert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.Draft_DrawingDrawingالرسمCreates a 2D projection on a Drawing Workbench page from the selected objects.
This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17.
Use TechDraw Workbench instead for generating technical drawings.Creates a 2D projection on a Drawing Workbench page from the selected objects.
This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17.
Use TechDraw Workbench instead for generating technical drawings.Draft_EditEditتعديلEdits the active object.
Press E or ALT+LeftClick to display context menu
on supported nodes and on supported objects.Edits the active object.
Press E or ALT+LeftClick to display context menu
on supported nodes and on supported objects.Draft_EllipseEllipseبيضويCreates an ellipse. CTRL to snap.Creates an ellipse. CTRL to snap.Draft_FacebinderFacebinderتجميع الواجههCreates a facebinder object from selected faces.Creates a facebinder object from selected faces.Draft_FinishLineFinish lineFinish lineFinishes a line without closing it.Finishes a line without closing it.Draft_FlipDimensionFlip dimensionFlip dimensionFlip the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Flip the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Draft_HatchHatchHatchCreate hatches on selected facesCreate hatches on selected facesDraft_HealHealHealHeal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.Heal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.Draft_JoinJoinJoinJoins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.Draft_LabelLabelعنوانCreates a label, optionally attached to a selected object or subelement.
First select a vertex, an edge, or a face of an object, then call this command,
and then set the position of the leader line and the textual label.
The label will be able to display information about this object, and about the selected subelement,
if any.
If many objects or many subelements are selected, only the first one in each case
will be used to provide information to the label.Creates a label, optionally attached to a selected object or subelement.
First select a vertex, an edge, or a face of an object, then call this command,
and then set the position of the leader line and the textual label.
The label will be able to display information about this object, and about the selected subelement,
if any.
If many objects or many subelements are selected, only the first one in each case
will be used to provide information to the label.Draft_LayerLayerLayerAdds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.Adds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.Draft_LineLineخطCreates a 2-point line. CTRL to snap, SHIFT to constrain.Creates a 2-point line. CTRL to snap, SHIFT to constrain.Draft_LinkArrayLinkArrayLinkArrayLike the Array tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Like the Array tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Draft_MirrorMirrorMirrorMirrors the selected objects along a line defined by two points.Mirrors the selected objects along a line defined by two points.Draft_MoveMoveنقلMoves the selected objects from one base point to another point.
If the "copy" option is active, it will create displaced copies.
CTRL to snap, SHIFT to constrain.Moves the selected objects from one base point to another point.
If the "copy" option is active, it will create displaced copies.
CTRL to snap, SHIFT to constrain.Draft_OffsetOffsetإزاحةOffsets of the selected object.
It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Offsets of the selected object.
It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Draft_PathArrayPath arrayPath arrayCreates copies of the selected object along a selected path.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Creates copies of the selected object along a selected path.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Draft_PathLinkArrayPath Link arrayPath Link arrayLike the PathArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Like the PathArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Draft_PathTwistedArrayPath twisted arrayPath twisted arrayCreates copies of the selected object along a selected path, and twists the copies.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Creates copies of the selected object along a selected path, and twists the copies.
First select the object, and then select the path.
The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.Draft_PathTwistedLinkArrayPath twisted Link arrayPath twisted Link arrayLike the PathTwistedArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Like the PathTwistedArray tool, but creates a 'Link array' instead.
A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.Draft_PointPointنقطةCreates a point object. Click anywhere on the 3D view.Creates a point object. Click anywhere on the 3D view.Draft_PointArrayPoint arrayPoint arrayCreates copies of the selected object, and places the copies at the position of various points.
The points need to be grouped under a compound of points before using this tool.
To create this compound, select various points and then use the Part Compound tool,
or use the Draft Upgrade tool to create a 'Block', or create a Sketch and add simple points to it.
Select the base object, and then select the compound or the sketch to create the point array.Creates copies of the selected object, and places the copies at the position of various points.
The points need to be grouped under a compound of points before using this tool.
To create this compound, select various points and then use the Part Compound tool,
or use the Draft Upgrade tool to create a 'Block', or create a Sketch and add simple points to it.
Select the base object, and then select the compound or the sketch to create the point array.Draft_PointLinkArrayPointLinkArrayPointLinkArrayLike the PointArray tool, but creates a 'Point link array' instead.
A 'Point link array' is more efficient when handling many copies.Like the PointArray tool, but creates a 'Point link array' instead.
A 'Point link array' is more efficient when handling many copies.Draft_PolygonPolygonمضلعCreates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrainCreates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrainDraft_RectangleRectangleمستطيلCreates a 2-point rectangle. CTRL to snap.Creates a 2-point rectangle. CTRL to snap.Draft_RotateRotateتدويرRotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
If the "copy" option is active, it will create rotated copies.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
If the "copy" option is active, it will create rotated copies.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.Draft_ScaleScaleالسلمScales the selected objects from a base point.
CTRL to snap, SHIFT to constrain, ALT to copy.Scales the selected objects from a base point.
CTRL to snap, SHIFT to constrain, ALT to copy.Draft_SelectGroupSelect groupSelect groupIf the selection is a group, it selects all objects that are inside this group, including those in nested sub-groups.
If the selection is a simple object inside a group, it will select the "brother" objects, that is,
those that are at the same level as this object, including the upper group that contains them all.If the selection is a group, it selects all objects that are inside this group, including those in nested sub-groups.
If the selection is a simple object inside a group, it will select the "brother" objects, that is,
those that are at the same level as this object, including the upper group that contains them all.Draft_SelectPlaneSelectPlaneSelectPlaneSelect the face of solid body to create a working plane on which to sketch Draft objects.
You may also select a three vertices or a Working Plane Proxy.Select the face of solid body to create a working plane on which to sketch Draft objects.
You may also select a three vertices or a Working Plane Proxy.Draft_SetStyleSet styleSet styleSets default stylesSets default stylesDraft_Shape2DViewShape 2D viewShape 2D viewCreates a 2D projection of the selected objects on the XY plane.
The initial projection direction is the negative of the current active view direction.
You can select individual faces to project, or the entire solid, and also include hidden lines.
These projections can be used to create technical drawings with the TechDraw Workbench.Creates a 2D projection of the selected objects on the XY plane.
The initial projection direction is the negative of the current active view direction.
You can select individual faces to project, or the entire solid, and also include hidden lines.
These projections can be used to create technical drawings with the TechDraw Workbench.Draft_ShapeStringShape from textShape from textCreates a shape from a text string by choosing a specific font and a placement.
The closed shapes can be used for extrusions and boolean operations.Creates a shape from a text string by choosing a specific font and a placement.
The closed shapes can be used for extrusions and boolean operations.Draft_ShowSnapBarShow snap toolbarShow snap toolbarShow the snap toolbar if it is hidden.Show the snap toolbar if it is hidden.Draft_SlopeSet slopeSet slopeSets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.Sets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.Draft_SnapToggles Grid On/OffToggles Grid On/OffToggle Draft GridToggle Draft GridDraft_Snap_AngleAngleالزاويةSet snapping to points in a circular arc located at multiples of 30 and 45 degree angles.Set snapping to points in a circular arc located at multiples of 30 and 45 degree angles.Draft_Snap_CenterCenterمركزSet snapping to the center of a circular arc.Set snapping to the center of a circular arc.Draft_Snap_DimensionsShow dimensionsShow dimensionsShow temporary linear dimensions when editing an object and using other snapping methods.Show temporary linear dimensions when editing an object and using other snapping methods.Draft_Snap_EndpointEndpointEndpointSet snapping to endpoints of an edge.Set snapping to endpoints of an edge.Draft_Snap_ExtensionExtensionExtensionSet snapping to the extension of an edge.Set snapping to the extension of an edge.Draft_Snap_GridGridشبكةSet snapping to the intersection of grid lines.Set snapping to the intersection of grid lines.Draft_Snap_IntersectionIntersectionتداخلSet snapping to the intersection of edges.Set snapping to the intersection of edges.Draft_Snap_LockMain snapping toggle On/OffMain snapping toggle On/OffActivates or deactivates all snap methods at once.Activates or deactivates all snap methods at once.Draft_Snap_MidpointMidpointMidpointSet snapping to the midpoint of an edge.Set snapping to the midpoint of an edge.Draft_Snap_NearNearestNearestSet snapping to the nearest point of an edge.Set snapping to the nearest point of an edge.Draft_Snap_OrthoOrthogonalOrthogonalSet snapping to a direction that is a multiple of 45 degrees from a point.Set snapping to a direction that is a multiple of 45 degrees from a point.Draft_Snap_ParallelParallelموازىSet snapping to a direction that is parallel to an edge.Set snapping to a direction that is parallel to an edge.Draft_Snap_PerpendicularPerpendicularPerpendicularSet snapping to a direction that is perpendicular to an edge.Set snapping to a direction that is perpendicular to an edge.Draft_Snap_SpecialSpecialSpecialSet snapping to the special points defined inside an object.Set snapping to the special points defined inside an object.Draft_Snap_WorkingPlaneWorking planeWorking planeRestricts snapping to a point in the current working plane.
If you select a point outside the working plane, for example, by using other snapping methods,
it will snap to that point's projection in the current working plane.Restricts snapping to a point in the current working plane.
If you select a point outside the working plane, for example, by using other snapping methods,
it will snap to that point's projection in the current working plane.Draft_SplitSplitSplitSplits the selected line or polyline into two independent lines
or polylines by clicking anywhere along the original object.
It works best when choosing a point on a straight segment and not a corner vertex.Splits the selected line or polyline into two independent lines
or polylines by clicking anywhere along the original object.
It works best when choosing a point on a straight segment and not a corner vertex.Draft_StretchStretchStretchStretches the selected objects.
Select an object, then draw a rectangle to pick the vertices that will be stretched,
then draw a line to specify the distance and direction of stretching.Stretches the selected objects.
Select an object, then draw a rectangle to pick the vertices that will be stretched,
then draw a line to specify the distance and direction of stretching.Draft_SubelementHighlightSubelement highlightSubelement highlightHighlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.Draft_TextTextنصCreates a multi-line annotation. CTRL to snap.Creates a multi-line annotation. CTRL to snap.Draft_ToggleConstructionModeToggle construction modeToggle construction modeToggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.Toggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.Draft_ToggleContinueModeToggle continue modeToggle continue modeToggles the Continue mode.
When this is active, any drawing tool that is terminated will automatically start again.
This can be used to draw several objects one after the other in succession.Toggles the Continue mode.
When this is active, any drawing tool that is terminated will automatically start again.
This can be used to draw several objects one after the other in succession.Draft_ToggleDisplayModeToggle normal/wireframe displayToggle normal/wireframe displaySwitches the display mode of selected objects from flatlines to wireframe and back.
This is helpful to quickly visualize objects that are hidden by other objects.
This is intended to be used with closed shapes and solids, and doesn't affect open wires.Switches the display mode of selected objects from flatlines to wireframe and back.
This is helpful to quickly visualize objects that are hidden by other objects.
This is intended to be used with closed shapes and solids, and doesn't affect open wires.Draft_ToggleGridToggle gridToggle gridToggles the Draft grid on and off.Toggles the Draft grid on and off.Draft_TrimexTrimexTrimexTrims or extends the selected object, or extrudes single faces.
CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.Trims or extends the selected object, or extrudes single faces.
CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.Draft_UndoLineUndo last segmentUndo last segmentUndoes the last drawn segment of the line being drawn.Undoes the last drawn segment of the line being drawn.Draft_UpgradeUpgradeUpgradeUpgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Upgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Draft_WirePolylinePolylineCreates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.Draft_WireToBSplineWire to B-splineWire to B-splineConverts a selected polyline to a B-spline, or a B-spline to a polyline.Converts a selected polyline to a B-spline, or a B-spline to a polyline.Draft_WorkingPlaneProxyCreate working plane proxyCreate working plane proxyCreates a proxy object from the current working plane.
Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
Then you can use it to save a different camera position and objects' states any time you need.Creates a proxy object from the current working plane.
Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
Then you can use it to save a different camera position and objects' states any time you need.FormWorking plane setupإعداد سطح العملSelect a face or working plane proxy or 3 vertices.
Or choose one of the options belowSelect a face or working plane proxy or 3 vertices.
Or choose one of the options belowSets the working plane to the XY plane (ground plane)تعيين سطح العمل إلى سطح XY (سطح أرضي)Top (XY)أعلى (XY)Sets the working plane to the XZ plane (front plane)تعيين سطح العمل إلى سطح XZ (سطح أمامي)Front (XZ)أمامي (XZ)Sets the working plane to the YZ plane (side plane)تعيين سطح العمل إلى سطح YZ (سطح جانبي)Side (YZ)الجانب (YZ)Sets the working plane facing the current viewSets the working plane facing the current viewAlign to viewمحاذاة للعرضThe working plane will align to the current
view each time a command is startedThe working plane will align to the current
view each time a command is startedAutomaticتلقائيAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveOffsetإزاحةIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveCenter plane on viewCenter plane on viewOr select a single vertex to move the current
working plane without changing its orientation.
Then, press the button belowOr select a single vertex to move the current
working plane without changing its orientation.
Then, press the button belowMoves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the viewMoves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the viewMove working planeMove working planeThe spacing between the smaller grid linesThe spacing between the smaller grid linesGrid spacingتباعد الشبكةThe number of squares between each main line of the gridThe number of squares between each main line of the gridMain line everyMain line everyThe distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawingThe distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawingSnapping radiusSnapping radiusCenters the view on the current working planeCenters the view on the current working planeCenter viewCenter viewResets the working plane to its previous positionResets the working plane to its previous positionPreviousPreviousGrid extensionGrid extension lines الخطوطStyle settingsStyle settingsText colorText colorShape colorShape colorLine widthعرض الخطThe color of facesThe color of facesThe type of dimension arrowsThe type of dimension arrowsDotنقطةCircleدائرةArrowسهمTickIoTick-2Tick-2The color of texts and dimension textsThe color of texts and dimension textsThe size of texts and dimension textsThe size of texts and dimension textsShow unitعرض الوحداتLine colorلون الخطThe size of dimension arrowsThe size of dimension arrowsThe font to use for texts and dimensionsالخط المراد استخدامه للنصوص والأبعادThe line styleThe line styleSolidصلبDashedDashedDottedDottedDashDotDashDotText sizeText sizeUnit overrideتجاوز الوحدةThe unit to use for dimensions. Leave blank to use current FreeCAD unitThe unit to use for dimensions. Leave blank to use current FreeCAD unitThe transparency of facesThe transparency of faces % %TransparencyالشفافيةDisplay modeDisplay modeText fontText fontArrow sizeحجم السهمThe display mode for facesThe display mode for facesFlat LinesFlat LinesWireframeWireframeShadedمظللPointsالنقطDraw styleDraw styleThe color of linesThe color of linesArrow styleArrow style px pxLines and facesLines and facesAnnotationsAnnotationsIf the unit suffix is shown on dimension texts or notIf the unit suffix is shown on dimension texts or notFills the values below with a stored style presetFills the values below with a stored style presetLoad presetLoad presetSave current style as a preset...Save current style as a preset...Apply above style to selected object(s)Apply above style to selected object(s)Selectedتم الإختيارTexts/dimsTexts/dimsText spacingText spacingThe space between the text and the dimension lineThe space between the text and the dimension lineLine spacingتباعد الأسطرThe spacing between different lines of textThe spacing between different lines of textFormإستمارةpattern files (*.pat)pattern files (*.pat)PAT file:PAT file:ScaleالسلمPattern:Pattern:Rotation:الدوران:°رمز الدرجة (وحدة لقياس الزواية)Gui::Dialog::DlgAddPropertyGroupمجموعةGui::Dialog::DlgSettingsDraftGeneral Draft Settingsإعدادات المسودة العامةThis is the default color for objects being drawn while in construction mode.هذا هو اللون الافتراضي للكائنات التي يجري رسمها بينما يتم وضع البناء.This is the default group name for construction geometryهذا هو اسم المجموعة الافتراضي لهندسة البناءConstructionاعمال بناءSave current color and linewidth across sessionsحفظ اللون الحالي وعرض الخط عبر الجلساتGlobal copy modeوضع النسخ العامDefault working planeسطح العمل الافتراضيNoneلا يوجدXY (Top)XY (أعلى)XZ (Front)XZ (من الأمام)YZ (Side)YZ (جانب)Default height for texts and dimensionsالارتفاع الافتراضي للنصوص والأبعادThis is the default font name for all Draft texts and dimensions.
It can be a font name such as "Arial", a default style such as "sans", "serif"
or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style
such as "Arial:Bold"هذا هو إسم الخط الإفتراضي لكل نصوص المسودة والأبعاد.
ويمكن أن يكون إسم خط كـ "arial"، أو نمط إفتراضي كـ "sans"، "serif" أو "mono"، أو ينتمي لقائمة خطوط كـ "Arial,Helvetica,sans" أو إسما يتوفر على نمط كـ "Arial:Bold"Default template sheetورقة النموذج الافتراضيThe default template to use when creating a new drawing sheetالنموذج الافتراضي الذي سيتم استخدامه عند إنشاء ورقة رسم جديدةImport styleاستيراد النمطNone (fastest)بلا (أسرع)Use default color and linewidthاستخدام اللون الافتراضي وعرض الخطOriginal color and linewidthاللون الأصلي وعرض الخطCheck this if you want the areas (3D faces) to be imported too.تحقق من هذا إذا كنت تريد أن يتم استيراد المناطق (وجوه 3D) أيضا.Import OCA areasاستيراد المناطق OCAGeneral settingsالإعدادات العامةConstruction group nameاسم مجموعة الإنشاءToleranceToleranceJoin geometryلحق الهندسةAlternate SVG Patterns locationAlternate SVG Patterns locationHere you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patternsيمكنك هنا تحديد المسار الذي يحتوي على ملفات الـ SVG والتي بدورها تحوي تعاريف الـ <pattern> والتي يمكن إضافتها إلى الأنماط المظللة للمسودات القياسيةConstrain modConstrain modThe Constraining modifier keyThe Constraining modifier keySnap modSnap modThe snap modifier keyمفتاح تحرير الكبسAlt modAlt modSelect base objects after copyingحدد الكائنات الأساسية بعد النسخIf checked, a grid will appear when drawingإذا تم تحديده، ستظهر شبكة عند الرسمUse gridاستخدام الشبكةGrid spacingتباعد الشبكةThe spacing between each grid lineالتباعد بين كل خط الشبكةMain lines everyالخطوط الرئيسية لكلMainlines will be drawn thicker. Specify here how many squares between mainlines.Mainlines will be drawn thicker. Specify here how many squares between mainlines.Internal precision levelمستوى الدقة الداخليةThis is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard.عندما تكون الأبعاد عمودية فهذا هو توجيه نصوص الأبعاد.
التوجيه الإفتراضي يكون على اليسار، وهذا هو معيار الإيزو.Left (ISO standard)اليسار (ISO اساسي)RightيمينGroup layers into blocksمجموعة الطبقات إلى كتلExport 3D objects as polyface meshesتصدير كائنات 3ض كما تنسجم الواجهاتIf checked, the Snap toolbar will be shown whenever you use snappingإذا تم تحديده، فسيتم عرض شريط أدوات الكبس كلما استخدمت التكبيسShow Draft Snap toolbarShow Draft Snap toolbarHide Draft snap toolbar after useHide Draft snap toolbar after useShow Working Plane trackerعرض معقب سطح العملIf checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a commandإذا تم تحديد هذا الإختيار، فإن شبكة(grid) المسودة ستكون مرئية عندما تكون طاولة العمل للمسودة نشطة.
على خلاف ذلك، فستكون مرئية فقط عند استعمال أمر(command) ماUse standard font size for textsاستخدم حجم الخط القياسي للنصوصImport hatch boundaries as wiresImport hatch boundaries as wiresRender polylines with widthتقديم polylines مع العرضTranslated (for print & display)مترجم (للطباعة والشاشة)Raw (for CAM)الخام (للكاميرا)Translate white line color to blackترجمة لون الخط الأبيض إلى الأسودUse Part Primitives when availableاستخدام الاجزاء الاولى عند توفرهاSnappingSnappingIf this is checked, snapping is activated without the need to press the snap mod keyإذا تم فحص هذا، يتم تنشيط الالتقاط دون الحاجة إلى الضغط على مفتاح الالتقاطAlways snap (disable snap mod)التقط دائماً (تعطيل وضع الالتقاط)Construction geometry colorلون هندسة البناءImportاستيرادtexts and dimensionsالنصوص والأبعادpointsالنقطlayoutsتخطيطات*blocks* كتلProject exported objects along current view directionتم تصدير العناصر إلى اتجاه العرض الحاليVisual settingsإعدادات بصريةVisual Settingsإعدادات بصريةSnap symbols styleنمط رموز الكبسDraft classic styleمشروع النمط الكلاسيكيBitsnpieces styleBitsnpieces styleColorلونHatch patterns resolutionHatch patterns resolutionGridشبكةAlways show the gridإظهار الشبكة دائماTexts and dimensionsالنصوص والأبعادInternal fontالخط الداخليDotنقطةCircleدائرةArrowسهمThe default size of arrowsالحجم الافتراضي للأسهمThe default size of dimensions extension linesالحجم الافتراضي لخطوط تمديد الأبعادThe space between the dimension line and the dimension textالمسافة بين سطر البعد ونص البعدSelect a font fileحدد ملف الخطFill objects with faces whenever possibleملء الأشياء مع وجوه كلما كان ذلك ممكناCreateإنشاءsimple Part shapesشكل الاجزاء البسيطةDraft objectsكائنات المسودةSketchesاسكتشاتGet original colors from the DXF fileالحصول على الألوان الأصلية من ملف DXFTreat ellipses and splines as polylinesعلاج علامات الحذف والعناوين كالخطوط المتعددةExport styleنمط التصديرShow the unit suffix in dimensionsعرض لاحقة الوحدة بأبعادAllow FreeCAD to automatically download and update the DXF librariesالسماح FreeCAD تلقائيا بتحميل وتحديث مكتبات DXFmmممGrid sizeحجم الشبكة lines الخطوطtext above (2D)النص أعلاه (2D) text inside (3D) text inside (3D)Dashed line definitionDashed line definition0.09,0.050.09,0.05Dashdot line definitionDashdot line definition0.09,0.05,0.02,0.050.09,0.05,0.02,0.05Dotted line definitionDotted line definition0.02,0.020.02,0.02Grid and snappingGrid and snappingText settingsإعدادات النصFont familyقائمة الخطوطFont sizeحجم الخطDimension settingsإعدادات البعدDisplay modeDisplay modeArrows styleArrows styleArrows sizeArrows sizeText orientationاتجاه النصText spacingText spacingShapeString settingsShapeString settingsDefault ShapeString font fileDefault ShapeString font fileDrawing view line definitionsDrawing view line definitionsDWGDWGDWG conversionتحويل DWG<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html><html><head/> <body><p><span style="font-weight:600;"> ملاحظة:</span> تطبيق خيارات DXF إلى ملفات DWG كذلك.</p></body></html>DXFDXFImport optionsإستيراد الخياراتUse legacy python importerاستخدام المستورد القديم بيثونExport optionsخيارات التصديرOCAOCASVGSVGDisable units scalingتعطيل وحدات التحجيمExport Drawing Views as blocksتصدير رسم المشاهدات كالكتلNote: Not all the options below are used by the new importer yetملاحظة: لا يتم استخدام جميع الخيارات أدناه من قبل المستورد الجديد بعدShow this dialog when importing and exportingعرض مربع الحوار هذا عند الاستيراد والتصديرAutomatic update (legacy importer only)Automatic update (legacy importer only)Prefix labels of Clones with:Prefix labels of Clones with:Scale factor to apply to imported filesعامل مقياس لتطبيقه على الملفات المستوردةMax segment length for discretized arcsMax segment length for discretized arcsNumber of decimalsعدد الكسور العشريةShiftShiftCtrlCtrlAltAltThe Alt modifier keyمفتاح تعديل AltThe number of horizontal or vertical lines of the gridعدد الخطوط الأفقية أو العمودية للشبكةThe default color for snap symbolsاللون الافتراضي لرمز الالتقاطCheck this if you want to use the color/linewidth from the toolbar as defaultقم بهذا الإختيار إذا كنت ترغب في استخدام اللون/عرض الخط من شريط الأدوات كصيغة إفتراضيةIf checked, a widget indicating the current working plane orientation appears during drawing operationsIf checked, a widget indicating the current working plane orientation appears during drawing operationsAn SVG linestyle definitionAn SVG linestyle definitionExtension lines sizeExtension lines sizeExtension line overshootExtension line overshootThe default length of extension line above dimension lineThe default length of extension line above dimension lineDimension line overshootDimension line overshootThe default distance the dimension line is extended past extension linesThe default distance the dimension line is extended past extension linesTickIoTick-2Tick-2Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only)Check this if you want to preserve colors of faces while doing downgrade and upgrade (splitFaces and makeShell only)Preserve colors of faces during downgrade/upgradePreserve colors of faces during downgrade/upgradeCheck this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only)Check this if you want the face names to derive from the originating object name and vice versa while doing downgrade/upgrade (splitFaces and makeShell only)Preserve names of faces during downgrade/upgradePreserve names of faces during downgrade/upgradeThe path to your ODA (formerly Teigha) File Converter executableThe path to your ODA (formerly Teigha) File Converter executableEllipse export is poorly supported. Use this to export them as polylines instead.Ellipse export is poorly supported. Use this to export them as polylines instead.Max Spline Segment:Max Spline Segment:The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.This is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.This is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.Use legacy python exporterUse legacy python exporterIf this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19Construction GeometryConstruction GeometryIn-Command ShortcutsIn-Command ShortcutsRelativeRelativeRRContinueContinueTTCloseإغلاقOOCopyنسخPPSubelement ModeSubelement ModeDDFillFillLLExitالخروجAASelect EdgeSelect EdgeEEAdd HoldAdd HoldQQLengthالطولHHWipeWipeWWSet WPSet WPUUCycle SnapCycle Snap``SnapSnapSSIncrease RadiusIncrease Radius[[Decrease RadiusDecrease Radius]]Restrict XRestrict XXXRestrict YRestrict YYYRestrict ZRestrict ZZZIf this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.Show groups in layers list drop-down buttonShow groups in layers list drop-down buttonDraft tools optionsDraft tools optionsWhen drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.When drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.Set focus on Length instead of X coordinateSet focus on Length instead of X coordinateSet the Support property when possibleSet the Support property when possibleIf this is checked, objects will appear as filled by default.
Otherwise, they will appear as wireframeIf this is checked, objects will appear as filled by default.
Otherwise, they will appear as wireframeNormally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.Normally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.If this is checked, copy mode will be kept across command,
otherwise commands will always start in no-copy modeIf this is checked, copy mode will be kept across command,
otherwise commands will always start in no-copy modeForce Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.Force Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.User interface settingsUser interface settingsEnable draft statusbar customizationEnable draft statusbar customizationDraft StatusbarDraft StatusbarEnable snap statusbar widgetEnable snap statusbar widgetDraft snap widgetDraft snap widgetEnable draft statusbar annotation scale widgetEnable draft statusbar annotation scale widgetAnnotation scale widgetAnnotation scale widgetDraft Edit preferencesDraft Edit preferencesEditتعديلMaximum number of contemporary edited objectsMaximum number of contemporary edited objects<html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html><html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html>Draft edit pick radiusDraft edit pick radiusControls pick radius of edit nodesControls pick radius of edit nodesPath to ODA file converterPath to ODA file converterThis preferences dialog will be shown when importing/ exporting DXF filesThis preferences dialog will be shown when importing/ exporting DXF filesPython importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yetPython importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yetAllow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.If unchecked, texts and mtexts won't be importedIf unchecked, texts and mtexts won't be importedIf unchecked, points won't be importedIf unchecked, points won't be importedIf checked, paper space objects will be imported tooIf checked, paper space objects will be imported tooIf you want the non-named blocks (beginning with a *) to be imported tooIf you want the non-named blocks (beginning with a *) to be imported tooOnly standard Part objects will be created (fastest)Only standard Part objects will be created (fastest)Parametric Draft objects will be created whenever possibleParametric Draft objects will be created whenever possibleSketches will be created whenever possibleSketches will be created whenever possibleScale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8Scale factor to apply to DXF files on import.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied. Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied. FreeCAD will try to join coincident objects into wires.
Note that this can take a while!FreeCAD will try to join coincident objects into wires.
Note that this can take a while!Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable Imported texts will get the standard Draft Text size,
instead of the size they have in the DXF documentImported texts will get the standard Draft Text size,
instead of the size they have in the DXF documentIf this is checked, DXF layers will be imported as Draft LayersIf this is checked, DXF layers will be imported as Draft LayersUse LayersUse LayersHatches will be converted into simple wiresHatches will be converted into simple wiresIf polylines have a width defined, they will be rendered
as closed wires with correct widthIf polylines have a width defined, they will be rendered
as closed wires with correct widthMaximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.All objects containing faces will be exported as 3D polyfacesAll objects containing faces will be exported as 3D polyfacesDrawing Views will be exported as blocks.
This might fail for post DXF R12 templates.Drawing Views will be exported as blocks.
This might fail for post DXF R12 templates.Exported objects will be projected to reflect the current view directionExported objects will be projected to reflect the current view directionMethod chosen for importing SVG object color to FreeCADMethod chosen for importing SVG object color to FreeCADIf checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter. If checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter. Style of SVG file to write when exporting a sketchStyle of SVG file to write when exporting a sketchAll white lines will appear in black in the SVG for better readability against white backgroundsAll white lines will appear in black in the SVG for better readability against white backgroundsVersions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length. Versions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length. If checked, an additional border is displayed around the grid, showing the main square size in the bottom left borderIf checked, an additional border is displayed around the grid, showing the main square size in the bottom left borderShow grid borderShow grid borderOverride unitOverride unitBy leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit.By leaving this field blank, the dimension measurements will be shown in the current unit defined in FreeCAD. By indicating a unit here such as m or cm, you can force new dimensions to be shown in that unit.The resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing fasterThe resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing fasterHatch Pattern default sizeHatch Pattern default sizeThe default size of hatch patternsThe default size of hatch patternsIf set, the grid will have its two main axes colored in red, green or blue when they match global axesIf set, the grid will have its two main axes colored in red, green or blue when they match global axesUse colored axesUse colored axesGrid color and transparencyGrid color and transparencyThe color of the gridThe color of the gridThe overall transparency of the gridThe overall transparency of the gridGlobalالإجماليGGPython exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yetPython exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yetImportAirfoilDATDid not find enough coordinatesDid not find enough coordinatesImportDWGConversion successfulConversion successfulConverting:Converting:ImportSVGUnknown SVG export style, switching to TranslatedUnknown SVG export style, switching to TranslatedThe export list contains no object with a valid bounding boxThe export list contains no object with a valid bounding boxWorkbenchDraft SnapDraft SnapdraftDraft Command BarDraft Command BarToggle construction modeToggle construction modeAutogroup offإيقاف المجموعة التلقائيةactive command:الأمر النشط:Noneلا يوجدActive Draft commandActive Draft commandX coordinate of next pointX تنسيق النقطة التاليةXXYYZZY coordinate of next pointY تنسيق النقطة التاليةZ coordinate of next pointZ تنسيق النقطة التاليةEnter pointأدخل نقطةEnter a new point with the given coordinatesأدخل نقطة جديدة مع إحداثيات معينةLengthالطولAngleالزاويةLength of current segmentطول القطاع الحاليAngle of current segmentزاوية الجزء الحاليRadiusنصف القطرRadius of Circleنصف قطر الدائرةIf checked, command will not finish until you press the command button againإذا تم تحديده، لن ينتهي الأمر حتى تضغط على زر الأمر مرة أخرى&OCC-style offset& نمط الإزاحة OCCSidesالجانبينNumber of sidesعدد من الجانبينOffsetإزاحةAutoتلقائيText string to drawالسلسلة النصية التي سيتم رسمهاStringسلسلةHeight of textارتفاع النصHeightالارتفاعIntercharacter spacingIntercharacter spacingTrackingتباعد الحروفFull path to font file:Full path to font file:Open a FileChooser for font fileOpen a FileChooser for font fileLineخطDWireDWireCircleدائرةArcقوسPointنقطةLabelعنوانDistanceDistancePick ObjectPick ObjectEditتعديلGlobal XGlobal XGlobal YGlobal YGlobal ZGlobal ZLocal XLocal XLocal YLocal YLocal ZLocal ZInvalid Size value. Using 200.0.قيمة الحجم غير صالحة. إستعمال 200.0.Invalid Tracking value. Using 0.Invalid Tracking value. Using 0.Please enter a text string.المرجو إدخال سلسلة نصية.Select a Font fileقم بإختيار ملف الخطPlease enter a font file.المرجو ادخال ملف خط.FacesوجوهRemoveإزالةAddإضافةFacebinder elementsFacebinder elementsCopyنسخThe DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either enable FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.The DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either enable FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.RelativeRelativeContinueContinueCloseإغلاقFillFillExitالخروجSnap On/OffSnap On/OffIncrease snap radiusIncrease snap radiusDecrease snap radiusDecrease snap radiusRestrict XRestrict XRestrict YRestrict YRestrict ZRestrict ZSelect edgeقم بإختيار حافةAdd custom snap pointAdd custom snap pointLength modeLength modeWipeWipeSet Working PlaneSet Working PlaneCycle snap objectCycle snap objectCheck this to lock the current angleقم بهذا الإختيار لقفل الزاوية الحاليةFilledFilledFinishإنهاءFinishes the current drawing or editing operationيقوم بإنهاء عملية الرسم أو التعديل الحالية&Undo (CTRL+Z)&Undo (CTRL+Z)Undo the last segmentUndo the last segmentFinishes and closes the current lineيقوم بإنهاء وإغلاق الخط الحاليWipes the existing segments of this line and starts again from the last pointWipes the existing segments of this line and starts again from the last pointSet WPSet WPReorients the working plane on the last segmentReorients the working plane on the last segmentSelects an existing edge to be measured by this dimensionSelects an existing edge to be measured by this dimensionIf checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commandsIf checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commandsSubelement modeSubelement modeModify subelementsModify subelementsIf checked, subelements will be modified instead of entire objectsIf checked, subelements will be modified instead of entire objectsTopأعلىFrontأمامSideSideCurrent working planeCurrent working planeDraftمسودةToggle near snap on/offToggle near snap on/offCreate textإنشاء نصPress this button to create the text object, or finish your text with two blank linesPress this button to create the text object, or finish your text with two blank linesOffset distanceOffset distanceChange default style for new objectsChange default style for new objectsNo active document. Aborting.No active document. Aborting.Object must be a closed shapeObject must be a closed shapeNo solid object createdNo solid object createdFaces must be coplanar to be refinedFaces must be coplanar to be refinedUpgrade: Unknown force method:Upgrade: Unknown force method:Found groups: closing each open object insideFound groups: closing each open object insideFound meshes: turning into Part shapesFound meshes: turning into Part shapesFound 1 solidifiable object: solidifying itFound 1 solidifiable object: solidifying itFound 2 objects: fusing themFound 2 objects: fusing themFound object with several coplanar faces: refine themFound object with several coplanar faces: refine themFound 1 non-parametric objects: draftifying itFound 1 non-parametric objects: draftifying itFound 1 closed sketch object: creating a face from itFound 1 closed sketch object: creating a face from itFound closed wires: creating facesFound closed wires: creating facesFound several wires or edges: wiring themFound several wires or edges: wiring themtrying: closing ittrying: closing itFound 1 open wire: closing itFound 1 open wire: closing itFound 1 object: draftifying itFound 1 object: draftifying itFound points: creating compoundFound points: creating compoundFound several non-treatable objects: creating compoundFound several non-treatable objects: creating compoundUnable to upgrade these objects.Unable to upgrade these objects.No object givenNo object givenThe two points are coincidentThe two points are coincidentFound 1 block: exploding itFound 1 block: exploding itFound 1 multi-solids compound: exploding itFound 1 multi-solids compound: exploding itFound 1 parametric object: breaking its dependenciesFound 1 parametric object: breaking its dependenciesFound 2 objects: subtracting themFound 2 objects: subtracting themFound several faces: splitting themFound several faces: splitting themFound several objects: subtracting them from the first oneFound several objects: subtracting them from the first oneFound 1 face: extracting its wiresFound 1 face: extracting its wiresFound only wires: extracting their edgesFound only wires: extracting their edgesNo more downgrade possibleNo more downgrade possibleWrong input: object not in document.Wrong input: object not in document.Wrong input: point object doesn't have 'Geometry', 'Links', or 'Components'.Wrong input: point object doesn't have 'Geometry', 'Links', or 'Components'.Wrong input: must be a placement, a vector, or a rotation.Wrong input: must be a placement, a vector, or a rotation.Wrong input: must be list or tuple of three points exactly.Wrong input: must be list or tuple of three points exactly.Wrong input: incorrect type of placement.Wrong input: incorrect type of placement.Wrong input: incorrect type of points.Wrong input: incorrect type of points.Radius:الشعاع:Center:Center:Create primitive objectCreate primitive objectFinal placement:Final placement:Face: TrueFace: TrueSupport:Support:Map mode:Map mode:length:length:Two elements are needed.Two elements are needed.Radius is too largeRadius is too largeSegmentSegmentRemoved original objects.Removed original objects.Wrong input: must be a list of strings or a single string.Wrong input: must be a list of strings or a single string.Circular arrayCircular arrayWrong input: must be a number or quantity.Wrong input: must be a number or quantity.Wrong input: must be an integer number.Wrong input: must be an integer number.Wrong input: must be a vector.Wrong input: must be a vector.Polar arrayPolar arrayWrong input: must be a number.Wrong input: must be a number.This function is deprecated. Do not use this function directly.This function is deprecated. Do not use this function directly.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Wrong input: object must not be a list.Wrong input: object must not be a list.Wrong input: object doesn't have a 'Shape' to measure.Wrong input: object doesn't have a 'Shape' to measure.Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.Wrong input: must be an integer.Wrong input: must be an integer.i1: values below 1 are not allowed; will be set to 1.i1: values below 1 are not allowed; will be set to 1.Wrong input: vertex not in object.Wrong input: vertex not in object.i2: values below 1 are not allowed; will be set to the last vertex in the object.i2: values below 1 are not allowed; will be set to the last vertex in the object.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.index: values below 1 are not allowed; will be set to 1.index: values below 1 are not allowed; will be set to 1.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to a circular edge.Wrong input: index doesn't correspond to a circular edge.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a list with two angles.Wrong input: must be a list with two angles.LayersLayersLayerLayerWrong input: it must be a string.Wrong input: it must be a string.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be a number between 0 and 100.Wrong input: must be a number between 0 and 100.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.No shape found
No shape found
All Shapes must be planar
All Shapes must be planar
All Shapes must be coplanar
All Shapes must be coplanar
Internal orthogonal arrayInternal orthogonal arrayWrong input: must be a number or vector.Wrong input: must be a number or vector.Input: single value expanded to vector.Input: single value expanded to vector.Input: number of elements must be at least 1. It is set to 1.Input: number of elements must be at least 1. It is set to 1.Orthogonal arrayOrthogonal arrayOrthogonal array 2DOrthogonal array 2DRectangular arrayRectangular arrayRectangular array 2DRectangular array 2DWrong input: subelement not in object.Wrong input: subelement not in object.Wrong input: must be a string, 'Custom', 'Name', 'Label', 'Position', 'Length', 'Area', 'Volume', 'Tag', or 'Material'.Wrong input: must be a string, 'Custom', 'Name', 'Label', 'Position', 'Length', 'Area', 'Volume', 'Tag', or 'Material'.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: must be a list of at least two vectors.Wrong input: must be a list of at least two vectors.Direction is not 'Custom'; points won't be used.Direction is not 'Custom'; points won't be used.Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: must be a list of two elements. For example, [object, 'Edge1'].ShapeString: string has no wiresShapeString: string has no wiresadded property 'ExtraPlacement'added property 'ExtraPlacement', path object doesn't have 'Edges'., path object doesn't have 'Edges'.'PathObj' property will be migrated to 'PathObject''PathObj' property will be migrated to 'PathObject'Cannot calculate path tangent. Copy not aligned.Cannot calculate path tangent. Copy not aligned.Tangent and normal are parallel. Copy not aligned.Tangent and normal are parallel. Copy not aligned.Cannot calculate path normal, using default.Cannot calculate path normal, using default.Cannot calculate path binormal. Copy not aligned.Cannot calculate path binormal. Copy not aligned.AlignMode {} is not implementedAlignMode {} is not implementedadded view property 'ScaleMultiplier'added view property 'ScaleMultiplier'migrated 'DraftText' type to 'Text'migrated 'DraftText' type to 'Text'Activate this layerActivate this layerSelect layer contentsSelect layer contentscustomcustomUnable to convert input into a scale factorUnable to convert input into a scale factorSet custom annotation scale in format x:x, x=xSet custom annotation scale in format x:x, x=xTask panel:Task panel:At least one element must be selected.At least one element must be selected.Selection is not suitable for array.Selection is not suitable for array.Object:Object:Number of elements must be at least 2.Number of elements must be at least 2.The angle is above 360 degrees. It is set to this value to proceed.The angle is above 360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.Center reset:Center reset:Fuse:Fuse:Create Link array:Create Link array:Number of elements:Number of elements:Polar angle:Polar angle:Center of rotation:Center of rotation:Aborted:Aborted:Number of layers must be at least 2.Number of layers must be at least 2.Radial distance is zero. Resulting array may not look correct.Radial distance is zero. Resulting array may not look correct.Radial distance is negative. It is made positive to proceed.Radial distance is negative. It is made positive to proceed.Tangential distance cannot be zero.Tangential distance cannot be zero.Tangential distance is negative. It is made positive to proceed.Tangential distance is negative. It is made positive to proceed.Radial distance:Radial distance:Tangential distance:Tangential distance:Number of circular layers:Number of circular layers:Symmetry parameter:Symmetry parameter:Number of elements must be at least 1.Number of elements must be at least 1.Interval X reset:Interval X reset:Interval Y reset:Interval Y reset:Interval Z reset:Interval Z reset:Number of X elements:Number of X elements:Interval X:Interval X:Number of Y elements:Number of Y elements:Interval Y:Interval Y:Number of Z elements:Number of Z elements:Interval Z:Interval Z:ShapeStringShapeStringDefaultالافتراضيPick ShapeString location point:Pick ShapeString location point:Create ShapeStringCreate ShapeStringDowngradeDowngradeSelect an object to upgradeSelect an object to upgradeSelect an object to cloneSelect an object to clonePick first pointPick first pointCreate EllipseCreate EllipsePick opposite pointPick opposite pointCreate LineCreate LineCreate WireCreate WirePick next pointPick next pointUnable to create a Wire from selected objectsUnable to create a Wire from selected objectsConvert to WireConvert to WireThis object does not support possible coincident points, please try again.This object does not support possible coincident points, please try again.Active object must have more than two points/nodesActive object must have more than two points/nodesSelection is not a KnotSelection is not a KnotEndpoint of BezCurve can't be smoothedEndpoint of BezCurve can't be smoothedSketch is too complex to edit: it is suggested to use sketcher default editorSketch is too complex to edit: it is suggested to use sketcher default editorSelect faces from existing objectsSelect faces from existing objectsChange slopeChange slopeSelect an object to editSelect an object to editCreate DimensionCreate DimensionCreate Dimension (radial)Create Dimension (radial)Edges don't intersect!Edges don't intersect!The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead.The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead.Select an object to projectSelect an object to projectAnnotation style editorAnnotation style editorOpen styles fileOpen styles fileJSON file (*.json)JSON file (*.json)Save styles fileSave styles fileUpgradeUpgradeMoveنقلSelect an object to moveSelect an object to movePick start pointPick start pointPick end pointPick end pointSome subelements could not be moved.Some subelements could not be moved.Point arrayPoint arrayPlease select exactly two objects, the base object and the point object, before calling this command.Please select exactly two objects, the base object and the point object, before calling this command.No active Draft Toolbar.No active Draft Toolbar.Construction modeConstruction modeContinue modeContinue modeToggle display modeToggle display modeMain toggle snapMain toggle snapMidpoint snapMidpoint snapPerpendicular snapPerpendicular snapGrid snapGrid snapIntersection snapIntersection snapParallel snapParallel snapEndpoint snapEndpoint snapAngle snap (30 and 45 degrees)Angle snap (30 and 45 degrees)Arc center snapArc center snapEdge extension snapEdge extension snapNear snapNear snapOrthogonal snapOrthogonal snapSpecial point snapSpecial point snapDimension displayDimension displayWorking plane snapWorking plane snapShow snap toolbarShow snap toolbarArrayمصفوفةSelect an object to arraySelect an object to arrayPick center pointPick center pointPick radiusPick radiusCreate Polygon (Part)Create Polygon (Part)Create PolygonCreate PolygonMirrorMirrorSelect an object to mirrorSelect an object to mirrorPick start point of mirror linePick start point of mirror linePick end point of mirror linePick end point of mirror lineCreate PointCreate PointScaleالسلمSelect an object to scaleSelect an object to scalePick base pointPick base pointPick reference distance from base pointPick reference distance from base pointSome subelements could not be scaled.Some subelements could not be scaled.This object type cannot be scaled directly. Please use the clone method.This object type cannot be scaled directly. Please use the clone method.Pick new distance from base pointPick new distance from base pointCreate 2D viewCreate 2D viewBezier curve has been closedBezier curve has been closedLast point has been removedLast point has been removedPick next point, or finish (A) or close (O)Pick next point, or finish (A) or close (O)Create BezCurveCreate BezCurveClick and drag to define next knotClick and drag to define next knotClick and drag to define next knot, or finish (A) or close (O)Click and drag to define next knot, or finish (A) or close (O)Flip dimensionFlip dimensionStretchStretchSelect an object to stretchSelect an object to stretchPick first point of selection rectanglePick first point of selection rectanglePick opposite point of selection rectanglePick opposite point of selection rectanglePick start point of displacementPick start point of displacementPick end point of displacementPick end point of displacementTurning one Rectangle into a WireTurning one Rectangle into a WireToggle gridToggle gridCreate PlaneCreate PlaneCreate RectangleCreate RectangleConvert Draft/SketchConvert Draft/SketchSelect an object to convert.Select an object to convert.Convert to SketchConvert to SketchConvert to DraftConvert to DraftHealHealPick target pointPick target pointCreate LabelCreate LabelPick endpoint of leader linePick endpoint of leader linePick text positionPick text positionSelect a Draft object to editSelect a Draft object to editNo edit point found for selected objectNo edit point found for selected object: this object is not editable: this object is not editablePath arrayPath arrayPlease select exactly two objects, the base object and the path object, before calling this command.Please select exactly two objects, the base object and the path object, before calling this command.Path twisted arrayPath twisted arrayTrimexTrimexSelect objects to trim or extendSelect objects to trim or extendPick distancePick distanceUnable to trim these objects, only Draft wires and arcs are supported.Unable to trim these objects, only Draft wires and arcs are supported.Unable to trim these objects, too many wiresUnable to trim these objects, too many wiresThese objects don't intersect.These objects don't intersect.Too many intersection points.Too many intersection points.Select an object to joinSelect an object to joinJoin linesJoin linesSelection:اختيار:Spline has been closedSpline has been closedCreate B-splineإنشاء منحنى BPick a face, 3 vertices or a WP Proxy to define the drawing planePick a face, 3 vertices or a WP Proxy to define the drawing planeWorking plane aligned to global placement ofWorking plane aligned to global placement ofDirDirCustomمخصصNo active command.No active command.Finish lineFinish lineClose lineClose lineUndo lineUndo lineClick anywhere on a line to split it.Click anywhere on a line to split it.Split lineSplit lineFillet radiusFillet radiusRadius of filletRadius of filletEnter radius.Enter radius.Delete original objects:Delete original objects:Chamfer mode:Chamfer mode:Two elements needed.Two elements needed.Test objectTest objectTest object removedTest object removedFillet cannot be createdFillet cannot be createdCreate filletCreate filletPick ShapeString location pointPick ShapeString location pointChange StyleChange StyleAdd to groupAdd to groupSelect groupSelect groupAutogroupتجميع تلقائىAdd new LayerAdd new LayerAdd to construction groupAdd to construction groupSelect an object to offsetSelect an object to offsetOffset only works on one object at a time.Offset only works on one object at a time.Cannot offset this object typeCannot offset this object typeOffset of Bezier curves is currently not supportedOffset of Bezier curves is currently not supportedStart angleStart anglePick start anglePick start angleAperture angleAperture anglePick aperturePick apertureCreate Circle (Part)Create Circle (Part)Create CircleCreate CircleCreate Arc (Part)Create Arc (Part)Create ArcCreate ArcPick aperture anglePick aperture angleArc by 3 pointsArc by 3 pointsPick location pointPick location pointCreate TextCreate TextRotateتدويرSelect an object to rotateSelect an object to rotatePick rotation centerPick rotation centerBase angleBase angleThe base angle you wish to start the rotation fromThe base angle you wish to start the rotation fromPick base anglePick base angleRotationالدورانThe amount of rotation you wish to perform.
The final angle will be the base angle plus this amount.The amount of rotation you wish to perform.
The final angle will be the base angle plus this amount.Pick rotation anglePick rotation angleGlobalالإجماليCoordinates relative to last point or to coordinate system origin
if is the first point to setCoordinates relative to last point or to coordinate system origin
if is the first point to setCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemCheck this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabledCheck this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabledIf checked, an OCC-style offset will be performedinstead of the classic offsetIf checked, an OCC-style offset will be performedinstead of the classic offsetLocal u0394XLocal u0394XLocal u0394YLocal u0394YLocal u0394ZLocal u0394ZGlobal u0394XGlobal u0394XGlobal u0394YGlobal u0394YGlobal u0394ZGlobal u0394ZAutogroup:Autogroup:Points:Points:Placement:Placement:Unable to scale object:Unable to scale object:Unable to scale objects:Unable to scale objects:Too many objects selected, max number set to:Too many objects selected, max number set to:mirroredmirroredCannot generate shape:Cannot generate shape:Selected Shapes must define a plane
Selected Shapes must define a plane
Offset angleOffset angleimportOCAOCA error: couldn't determine character encodingOCA error: couldn't determine character encodingOCA: found no data to exportOCA: found no data to exportsuccessfully exportedsuccessfully exported