DialogAnnotation Styles EditorRenames the selected styleRenameDeletes the selected styleNewDeleteLayers ManagerSelect AllToggle VisibilityIsolateCancelOKImport styles from json fileExport styles to json fileThe font to use for texts and dimensionsFont nameThe font size in system unitsThe width of the lines pxThe color of lines and arrowsLine and arrow colorThe distance the dimension line is additionally extendedDimension line overshootExtension line lengthThe distance the extension lines are additionally extended beyond the dimension lineFont sizeThe line spacing for multi-line texts and labels (relative to the font size)The color of texts, dimension texts and label textsText colorUnitsA multiplier factor that affects the size of texts and markersStyle NameThe name of the style. Existing style names can be edited.Add new…Scale multiplierThe type of the starting arrows or markers to use for dimensions and labelsStart arrow typeNoneThe size of the starting arrows or markers in system unitsStart arrow sizeThe type of the ending arrows or markers to use for dimensions and labelsEnd arrow typeThe size of the ending arrows or markers in system unitsEnd arrow sizeIf it is checked it will show the unit next to the dimension valueShow unitSpecify a valid length unit like mm, m, in, ft, to force displaying the dimension value in this unitUnit overrideThe number of decimals to show for dimension valuesDimension DetailsThe distance between the dimension text and the dimension lineText spacingAnnotationsTextsLine spacing factorLines and ArrowsDisplays the dimension lineShow dimension lineLine widthDotCircleArrowTickTick-2Shows the unit next to the dimension valueNumber of decimalsExtension line overshootThe length of the extension linesDraftCircularArrayTaskPanelCircular ArrayDistance from one layer of objects to the next layer of objectsRadial distanceDistance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.Tangential distanceThe number of symmetry lines in the circular arrayCenter of RotationResets the coordinates of the center of rotationReset PointSymmetryNumber of concentric circles to create, including a copy of the original object.
It must be at least 2.Number of concentric circlesThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.XYZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayDraftOrthoArrayTaskPanelNumber of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.XYZReset XReset YDistance between the elements in the Z direction.
Normally, only the Z value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Orthogonal ArrayToggles between orthogonal and linear modeSwitch to Linear ModeX axisY axisZ axisNumber of ElementsCurrently selected axisDistance between the elements in the X-direction.
Normally, only the X value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.X IntervalsResets the distancesDistance between the elements in the Y-direction.
Normally, only the Y value is necessary; the other two values can give an additional shift in their respective directions.
Negative values will result in copies produced in the negative direction.Y IntervalsZ IntervalsReset ZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayDraftPolarArrayTaskPanelPolar ArraySweeping angle of the polar distribution.
A negative angle produces a polar pattern in the opposite direction.
The maximum absolute value is 360 degrees.Polar angleNumber of elements in the array, including a copy of the original object.
It must be at least 2.Number of elementsThe coordinates of the point through which the axis of rotation passes.
Change the direction of the axis itself in the property editor.Center of RotationResets the coordinates of the center of rotationReset PointXYZIf checked, the resulting objects in the array will be fused if they touch each other.
This only works if "Link array" is off.FuseIf checked, the resulting object will be a "Link array" instead of a regular array.
A Link array is more efficient when creating multiple copies, but it cannot be fused together.Link arrayDraftShapeStringGuiShapeStringXYZCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemGlobalFont files (*.ttc *.ttf *.otf *.pfb *.TTC *.TTF *.OTF *.PFB)Text to be made into ShapeStringEnter coordinates or pick a point with the mouseResets the picked pointReset PointHeightHeight of the resultTextFont fileFormTop (XY)Front (XZ)Side (YZ)Sets the working plane facing the current viewWorking Plane SetupChoose an option below. Or define a working plane by selecting 3 vertices, 1 or more shapes, or a working plane proxy, and then confirm with a click in the 3D view.Sets the working plane to the XY-plane (ground plane)Sets the working plane to the XZ-plane (front plane)Sets the working plane to the YZ-plane (side plane)Align to ViewThe working plane will align to the current
view each time a command is startedAutomaticOffsetAn optional offset to give to the working plane
above its base position. Use this together with one
of the buttons aboveIf this is selected, the working plane will be
centered on the current view when pressing one
of the buttons aboveCenter plane on viewCenters the working plane on the current view when pressing one
of the buttons aboveOr select a single vertex to move the current working plane without changing its orientation. Then press the button below.Moves the working plane without changing its
orientation. If no point is selected, the plane
will be moved to the center of the view.Move Working PlaneThe color of the gridGrid colorThe distance between grid linesThe number of squares between major grid linesMajor lines every squaresGrid sizeThe distance at which a point can be snapped toCenter ViewResets the working plane to its next positionNextGrid spacingThe number of squares in the X- and Y-direction of the gridSnapping radiusCenters the view on the current working planeResets the working plane to its previous positionPreviousLoad presetShapeAmbient shape colorEmissive shape colorSpecular shape colorShape transparencyShape shininessOtherLine colorLine width pxDraw styleSolidDashedDottedDashDotDisplay modeFlat LinesWireframeShadedFill the values below from a stored style presetPoint colorPoint sizePointsShape colorAnnotationsExtension line lengthExtension line overshootText spacingText colorDimensionsDotAnnotationTextsLine spacing factorThe annotation scale multiplier is the inverse of the scale set in the
Annotation scale widget. If the scale is 1:100 the multiplier is 100.Start arrow typeCircleArrowTickTick-2NoneStart arrow sizeEnd arrow typeEnd arrow sizeThe unit override for dimensions. Leave blank to use the current FreeCAD unit.Dimension line overshootThe distance the dimension line is extended past the extension linesThe color for texts, dimension texts and label textsFont nameThe font for texts, dimensions and labelsFont sizeThe height for texts, dimension texts and label textsThe line spacing for multi-line texts and labels (relative to the font size)Scale multiplierLine and arrow colorStyle SettingsSaves the current style as a presetShape AppearanceLines and ArrowsAdds a unit symbol to dimension textsThe length of extension lines. Use 0 for full extension lines. A negative value
defines the gap between the ends of the extension lines and the measured points.
A positive value defines the maximum length of the extension lines. Only used
for linear dimensions.The length of extension lines above the dimension lineThe space between the dimension line and the dimension textApply the above style to selected object(s)Apply the above style to all annotations (texts, dimensions and labels)Show unitUnit overrideSelectedHatchPAT filePatternScaleRotationAlign to faceAligns the pattern with the base object.
Otherwise, the pattern aligns with the global coordinate system.
This setting modifies the Translate property.Pattern files (*.pat *.PAT)Gui::Dialog::DlgSettingsDraftDefault working planeGeneralThe number of decimals used in internal coordinate operations (for example 3 = 0.001).
Values between 6 and 8 are usually considered the best trade-off.The default working plane for new views. If set to "Automatic" the working plane
will automatically align with the current view whenever a command is started.
Additionally it will align to preselected planar faces, or when points on planar
faces are picked during commands.XY (Top)XZ (Front)YZ (Side)If checked, a widget indicating the current working
plane orientation appears when picking pointsIf checked, the layers drop-down list also includes groups.
Objects can then automatically be added to groups as well.Include groups in layer listIf checked, base objects, instead of created copies, are selected after copyingIf checked, Draft commands will create Part primitives instead of Draft objects.
Note that this is not fully supported, and many objects will not be editable with
Draft modification commands.Create Part primitives if possibleIf checked, Draft Downgrade and Draft Upgrade will keep face colors.
Only for the splitFaces and makeShell options.Keep face colors during downgrade/upgradeIf checked, Draft Downgrade and Draft Upgrade will keep face names.
Only for the splitFaces and makeShell options.Keep face names during downgrade/upgradeThis is a delay during which the mouse is inactive, after entering numbers
manually in any of the coordinate fields. Setting this to 0 disables the delay.
If a delay of 1 is set, after entering a numeric value, the mouse will not
update the field anymore during one second, to avoid moving the mouse
accidentally and modifying the entered value.Edit node pick radiusThe pick radius of edit nodesLabel prefix for clonesThe default prefix added to the label of new clonesConstruction group labelThe default label for the construction geometry groupThe default color for Draft objects in construction modeInternal precision levelShow working plane orientationCommand OptionsIf checked, instructions are displayed in the Report View when using Draft commandsShow prompts in the Report ViewIf checked, Length input, instead of the X coordinate, will have the initial focus.
This allows indicating a direction and then type a distance.Set focus on Length instead of X coordinateSelect base objects after copyingMaximum number of editable objectsConstructionConstruction geometry colorDraft classic styleBitsnpieces styleVisualSVG PatternsSVG pattern sizeThe default size for SVG patterns. A higher value results in a denser pattern.Additional SVG pattern locationAn optional directory with custom SVG files containing
pattern definitions to be added to the standard patternsDrawing View Line DefinitionsDashed line definitionAn SVG linestyle definitionDashdot line definitionDotted line definitionTexts and dimensionsFont sizemmLines and ArrowsStart arrow typeThe default symbol displayed at the start of dimension linesNoneStart arrow sizeThe default starting arrow sizeEnd arrow typeThe default symbol displayed at the end of dimension linesEnd arrow sizeThe default ending arrow sizeNumber of decimalsDimension DetailsExtension line overshootDimension line overshootThe default annotation scale multiplier. This is the inverse of the scale set
in the Draft Scale Widget. If the scale is 1:100 the multiplier is 100.TextsThe default height for texts, dimension texts and label textsLine spacing factorThe default line spacing for multi-line texts and labels (relative to the font size)Scale multiplierTexts and DimensionsAnnotationsFont nameThe default font for texts, dimensions and labelsText colorThe default color for texts, dimension texts and label textsIf checked, the dimension line is displayed by defaultShow dimension lineLine widthThe default line width pxDotCircleArrowTickTick-2Line and arrow colorThe default color for lines and arrowsUnitsIf checked, a unit symbol is added to dimension texts by defaultShow unitUnit overrideThe default unit override for dimensions. Enter a unit such as m
or cm, leave blank to use the current unit defined in FreeCAD.The default number of decimal places for dimension textsThe optional string inserted between the feet and inches values in dimensionsThe default distance the dimension line is extended past the extension linesExtension line lengthThe default length of extension lines. Use 0 for full extension lines. A negative
value defines the gap between the ends of the extension lines and the measured
points. A positive value defines the maximum length of the extension lines. Only
used for linear dimensions.The default length of extension lines above the dimension lineThe default space between the dimension line and the dimension textText spacingFeet separatorSVGImport styleUse default style from Part/PartDesignUse original SVG styleIf checked, no unit conversion will occur.
One unit in the SVG file will be interpreted as one millimeter.Disable unit scalingAdd wires for invalid facesMethod for importing SVG object colorsIf face generation results in a degenerated face,
a raw wire from the original shape is addedCheck to cut shapes according to the even/odd SVG fill ruleApply CutsCoordinate precision (crucial for detecting closed paths)The number of decimal places used in internal coordinate operations (for example 3 = 0.001).
The optimal value depends on the absolute size of the import. Typical values are between 1 and 5.Export styleStyle of SVG file to write when exporting a sketchTranslated (for print & display)Raw (for CAM)All white lines will appear in black in the SVG for better readability against white backgroundsConvert white line color to blackMaximum segment length for discretized arcsVersions of OpenCASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.OCAImport OptionsImports the areas (3D faces) tooImport OCA areasDXFAllow FreeCAD to automatically download and update the DXF librariesImportAll objects containing faces will be exported as 3D polyface meshesProject exported objects along current view directionUse colors from the DXF fileJoin geometryUse standard font size for textsRender polylines with widthEllipse export is poorly supported. Use this to export them as polylines instead.Treat ellipses and splines as polylinesIf checked, this preferences dialog will be shown each time you import or export
a DXF file.Show the importer dialog when importing a fileUse the legacy Python importer. This importer is more feature-complete but slower and requires an external library.Use legacy importerUse the legacy Python exporter. This exporter is more feature-complete but slower and requires an external library.Use legacy exporterAutomatic Update (Legacy Only)If checked, FreeCAD is allowed to download and update the Python libraries
required by the legacy importer. This can also be done manually by installing
the 'dxf_library' addon from the Addon Manager.Import AsCreates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench. Editable Draft objects (highest fidelity, slowest)DxfImportModeCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing and Part workbench integration.Editable Part primitives (high fidelity, slower)Creates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Individual Part shapes (balanced, recommended)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for importing and viewing very large files with maximum performance.Fused Part shapes (lowest fidelity, fastest)Import SettingsGlobal scaling factorScale factor to apply to DXF files on import. The factor is the conversion
between the DXF file's unit and millimeters. Example: for files in
millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4,
in feet: 304.8If checked, text, mtext, and dimension entities will be imported as Draft objectsIf checked, point entities will be importedPointsIf checked, entities from the paper space will also be imported. By default,
only model space is importedPaper space objectsIf checked, anonymous blocks (whose names begin with *) will also be imported.
These are often used for hatches and dimensionsAnonymous blocks (*-blocks)If checked, the boundaries of hatch objects will be imported as closed wires.
(Legacy importer only)Hatch boundariesAppearanceIf checked, colors will be set as specified in the DXF file whenever
possible. Otherwise, default FreeCAD colors are appliedIf checked, imported texts will get the standard Draft text size, instead of
the size defined in the DXF document. (Legacy importer only)Advanced processingIf checked, the legacy importer will attempt to join coincident geometric
objects into wires. This can be slow for large files. (Legacy importer only)If checked, polylines that have a width property will be rendered as faces
representing that width. (Legacy importer only)If checked, the legacy importer will attempt to create Sketcher objects
instead of Draft or Part objects. This overrides the 'Import As' settingCreate sketchesExport OptionsMaximum spline segmentMaximum length of each of the polyline segments. '0' treats the whole spline as a straight segment.Export 3D objects as polyface meshesTechDraw Views will be exported as blocks.
This might fail for post DXF R12 templates.Export TechDraw Views as blocksExported objects will be projected to reflect the current view directionShiftAlways snapGrid and SnappingIf checked, the outline of a human figure is displayed at the bottom left
corner of the grid. Only effective if "Show grid border" is enabled.Major lines everyThe number of squares between major grid lines.
Major grid lines are thicker than minor grid lines. squaresSnapping and Modifier KeysSnap modifierThe Snap modifier keyCtrlAltConstrain modifierAlt modifierThe Alt modifier key. The function of this key depends on the command.If checked, the grid will always be visible in new views.
Use Draft ToggleGrid to change this for the active view.The distance between grid linesThe maximum number of objects Draft Edit is allowed to process at the same timeGridAlways show the gridIf checked, the grid will be visible during commands in new views.
Use Draft ToggleGrid to change this for the active view.Show the grid during commandsIf checked, an additional border is displayed around the grid,
showing the main square size in the bottom left cornerShow grid borderShow human figureIf checked, the two main axes of the grid are colored red, green or blue
if they match the X, Y or Z axis of the global coordinate systemUse colored axesGrid spacingGrid sizeThe number of squares in the X- and Y-direction of the gridGrid transparency %Grid colorThe constrain modifier keySnap symbol styleMouse delay secondsThe style for snap symbolsSnap symbol colorThe color for snap symbolsIf checked, snapping is activated without the need to press the Snap modifier keyThe color of the gridThe overall transparency of the gridDWGThis is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD.AutomaticDWG ConversionConversion methodLibreDWGODA ConverterQCAD proPath to file converterThe path to your DWG file converter executable<html><head/><body><p><span style=" font-weight:600;">Note:</span> DXF options apply to DWG files as well.</p></body></html>RelativeRContinueCloseOCopyLInterfaceFSelect edgeSubelement modeBCExitAIncrease radiusDecrease radiusEQLengthWipeWUGlobalIn-Command ShortcutsGMake faceUndoNCycle snapAdd holdSet working planeSnapSRestrict XXRestrict YYRestrict ZZRecenterDUI OptionsIf checked, the Draft Snap toolbar will only be visible during commandsOnly show the Draft Snap toolbar during commandsIf checked, the Draft Snap Widget is displayed in the Draft Status BarShow the Draft Snap Widget in the Draft WorkbenchIf checked, the Draft Scale Widget is displayed in the Draft Status BarShow the Draft Scale Widget in the Draft WorkbenchdraftRelativeGlobalContinueIf checked, the command will not finish until pressing the command button againIf checked, the next dimension will be placed in a chain with the previously placed DimensionCloseSet Working PlaneSelect EdgeCopyWipeAll shapes must be coplanarSelected shapes must define a planeTopFrontSideAutoCurrent working plane: AutoCurrent working plane:Selected shapes do not define a planeNo previous working planeNo next working planeAxes:Position:Noneactive command:Active Draft commandX coordinate of the pointXYZLengthAngleRadiusCreates the text object and finishes the commandChanges the default style for new objectsToggles construction modeLabel TypeRadius of CircleCoordinates relative to last point or to coordinate system origin
if is the first point to setY coordinate of the pointZ coordinate of the pointEnter PointLength of the current segmentAngle of the current segmentLocks the current angleRadius of the circleCoordinates relative to global coordinate system.
Uncheck to use working plane coordinate systemFinishFinishes the current drawing or editing operationModify ObjectsFacebinder ElementsIf checked, an OCC-style offset will be performed instead of the classic offsetOCC-style offsetUndoIf checked, objects will be copied instead of movedUndo the last segmentEnter a point with given coordinatesMake faceIf checked, the object will be filled with a face.
Not available if the 'Use Part Primitives' preference is enabledChained modeFinishes and closes the current lineWipes the existing segments of this line and starts again from the last pointReorients the working plane on the last segmentSelects an existing edge to be measured by this dimensionSidesNumber of sidesModify subelementsIf checked, subelements will be modified instead of entire objectsAutogroup offLineDWireCircleArcRotatePointLabelOffsetDistanceOffset distanceTrimexLocal {}Global {}Autogroup:FacesRemoveAddDraftConverting:Conversion successfulLibreDWG converter not foundODA converter not foundQCAD converter not foundNo suitable external DWG converter has been found.
Please set one manually under menu Edit → Preferences → Import/Export → DWG
For more information see:
https://wiki.freecad.org/Import_Export_PreferencesError during DWG conversion.
Try moving the DWG file to a directory path without spaces and non-english characters,
or try saving to a lower DWG version.CustomUnable to convert input into a scale factorSet Custom ScaleDraft Scale WidgetA context menu action used to show or hide this toolbar widgetSet the scale used by Draft annotation toolsDraft Snap WidgetA context menu action used to show or hide this toolbar widgetSet custom annotation scale in format x:x, x=xNo active document. Aborting.Wrong input: object {} not in document.Unable to insert new object into a scaled partSymbol not implemented. Using a default symbol.image is Nullfilename does not exist on the system or in the resource fileunable to load textureDoes not have 'ViewObject.RootNode'.Solids:Faces:Wires:Edges:Vertices:FaceWiredifferent typesObjects have different placements. Distance between the two base points:%s cannot be modified because its placement is readonlyThis function will be deprecated in {}. Please use '{}'.This function will be deprecated. Please use '{}'.has a different valuedoesn't exist in one of the objects%s shares a base with %d other objects. Please check if you want to modify this.Wrong input: unknown document {}Pick target pointCreate LabelPick endpoint of leader linePick text positionPick first pointEdges do not intersect!Create LineCreate Wire%1 pick next point, snap to first point to close%1 pick next pointUnable to create a wire from the selected objectsPolylinePick next pointConvert to WireSelect an object to joinJoin LinesOnly Draft lines and wires can be joinedSelection:Pick location pointCreate TextSelect an object to convertConvert to SketchConvert to DraftConvert Draft/SketchSelect an object to movePick start pointPick end pointNo valid subelements selectedMovePick center pointPick radiusStart anglePick start angleAperture anglePick aperture%1 constrain%1 snap%1/%2/%3 switch constraint%1 toggle relative%1 toggle global%1 toggle continue%1 pick center%1 pick radius%1 pick apertureCreate Circle (Part)Create CircleCreate Arc (Part)Create ArcPick aperture angle%1 pick start angleArc From 3 PointsCreate Arc From 3 Points%1 pick first point%1 pick second point%1 pick third pointSelect an object to editSelect a Draft object to editEdit NodeToo many objects selected, maximum number set to:No edit point found for selected object: this object is not editableAnnotation Style EditorNew StyleStyle nameStyle name requiredNo style name specifiedStyle existsThis style name already existsStyle in useThis style is used by some objects in this document. Proceed?Rename StyleNew nameOpen Styles FileJSON files (*.json *.JSON)Save Styles FileJSON file (*.json)Select an object to projectCreate 2D ViewCreate Point%1 pick pointSelect an object to rotatePick rotation centerBase angleThe base angle to start the rotation fromThe amount of rotation to perform.
The final angle will be the base angle plus this amount.Pick base angleRotationPick rotation angleAdd to New GroupAdd to GroupNo new selection. Select non-empty groups or objects inside groups.New LayerLayer nameLayerObject labelNew layerAdd to Construction GroupNew GroupGroup nameGroupObject labelNew named groupUngroupGroupFillet radiusRadius of the filletEnter radiusCreate FilletFillet cannot be createdPolygonCreate Polygon (Part)Create PolygonSelect objects to trim or extendThis object is not supportedOnly a single face can be extrudedTrimex does not support this object typeUnable to trim these objects, only Draft wires and arcs are supportedThese objects do not intersectToo many intersection pointsOffset only works on one object at a timeOffset of Bézier curves is currently not supportedPick distanceOffset angleUnable to trim these objects, too many wiresB-SplineCreate B-SplineChange StyleThis object does not support possible coincident pointsDelete PointAdd PointOpen WireClose WireReverse WireActive object must have more than 2 points or nodesOpen SplineClose SplineReverse SplineMove ArcSet First AngleSet Last AngleSet RadiusInvert ArcMake SharpMake TangentMake SymmetricReverse CurveOpen CurveClose CurveSelection is not a knotEndpoint of Bézier curve cannot be smoothedActive object must have more than two points/nodesBézier CurveCreate Bézier CurveCubic Bézier CurveClick and drag to define next knot%1 click and drag to define first point and knot%1 click and drag to define next point and knotEllipseCreate EllipsePick opposite point%1 pick opposite pointSelect faces from existing objectsSelect an object to scalePick base pointPick reference distance from base pointZero scale factor not allowedScalePick new distance from base pointLayerCreate DimensionEdge too short!Select an object to stretchPick first point of selection rectanglePick the opposite point of the selection rectangleTurning a rectangle into a wirePick start point of displacementPick end point of displacementStretchRectangleCreate PlaneCreate RectangleSelect an object to mirrorPick start point of mirror lineMirrorPick end point of mirror lineSelect an object to cloneCannot clone objects without a shape, abortingCannot clone objects without a shape, skipping themSelect an object to upgradeUpgradeSelect an object to offsetCannot offset this object typePick ShapeString location pointCreate ShapeStringHealDowngradeObject:Polar ArrayNumber of elements must be at least 2The angle is above 360 degrees. It is set to this value to proceed.The angle is below -360 degrees. It is set to this value to proceed.Create Polar ArrayFuse:Create Link array:Number of elements:Polar angle:Center of rotation:Orthogonal ArrayNumber of elements must be at least 1In linear mode, at least 1 axis must be selectedCreate Orthogonal ArrayCreate link array:Number of X elements:Interval X:Number of Y elements:Interval Y:Number of Z elements:Interval Z:Switch to Ortho ModeX-AxisY-AxisZ-AxisSwitch to Linear ModeNumber of elementsIntervalShapeStringDefaultRadial distance is zero. Resulting array may not look correct.Radial distance is negative. It is made positive to proceed.Circular ArrayAt least 1 element must be selectedNumber of layers must be at least 2Selection is not suitable for arrayTangential distance cannot be 0Tangential distance is negative. It is made positive to proceed.Create Circular ArrayRadial distance:Tangential distance:Number of concentric circles:Symmetry parameter:Font file not foundSpecified font file is not a fileSpecified font type is not supportedShapeString: oblique angle must be in the -80 to +80 degree rangeShapeString: string has no wiresShapeString: face creation failed for one character, path object does not have 'Edges'.Start Offset too large for path length. Using 0 instead.End Offset too large for path length minus Start Offset. Using 0 instead.Length of tangent vector is 0. Copy not aligned.Length of normal vector is 0. Using a default axis instead.Spacing unit of 0 is not allowed, using defaultOperation would generate too many objects. AbortingTangent and normal vectors are parallel. Normal replaced by a default axis.Cannot calculate normal vector. Using the default normal instead.AlignMode {} is not implementedNo shape foundAll shapes must be planarPoints:Wrong input: must be a list or tuple of 3 points exactly.Wrong input: must be list or tuple of 3 points exactly.Placement:Wrong input: incorrect type of placement.Wrong input: incorrect type of points.Cannot generate shape:Wrong input: base_object not in document.Wrong input: path_object not in document.Wrong input: must be a number.Wrong input: must be a vector.Wrong input: must be a list or tuple of strings, or a single string.Wrong input: must be 'Original', 'Frenet', or 'Tangent'.Wrong input: must be a number or vector.Input: single value expanded to vector.Wrong input: must be an integer number.Input: number of elements must be at least 1. It is set to 1.Wrong input: must be a placement, a vector, or a rotation.Wrong input: target_object must not be a list.Wrong input: target_object not in document.Wrong input: subelements must be a list or tuple of strings, or a single string.Wrong input: subelement {} not in object.Wrong input: label_type must be a string.Wrong input: label_type must be one of the following:Wrong input: must be a list of strings or a single string.Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.Wrong input: points {} must be a list of at least two vectors.Direction is not 'Custom'; points won't be used.Wrong input: must be a list of two elements. For example, [object, 'Edge1'].Wrong input: point_object not in document.Wrong input: object has the wrong type.This function is deprecated. Do not use this function directly.Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.Wrong input: edge_object must not be a list or tuple.Wrong input: edge_object not in document.Wrong input: object doesn't have a 'Shape' to measure.Wrong input: object does not have at least 1 element in 'Vertexes' to use for measuring.Wrong input: must be an integer.i1: values below 1 are not allowed; will be set to 1.Wrong input: vertex not in object.i2: values below 1 are not allowed; will be set to the last vertex in the object.Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.index: values below 1 are not allowed; will be set to 1.Wrong input: index doesn't correspond to an edge in the object.Wrong input: index doesn't correspond to a circular edge.Wrong input: must be a string, 'radius' or 'diameter'.Wrong input: must be a list with two angles.Wrong input: must be a number or quantity.LayersWrong input: it must be a string.Wrong input: must be a tuple of three floats 0.0 to 1.0.Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.Wrong input: must be a number between 0 and 100.EditFlattenUpgrade: Unknown force method:Found 1 block: exploding itFound 1 multi-solids compound: exploding itFound 1 parametric object: breaking its dependenciesDowngrade: Unknown force method:Found 1 array: exploding itFound 2 objects: subtracting themFound several faces: splitting themFound several faces: subtracting them from the first oneUnable to downgrade these objectsFound 1 face: extracting its wiresFound only wires: extracting their edgesNo object givenThe two points are coincidentmirroredFound 1 solidifiable object: solidifying itFound 2 objects: fusing themFound groups: closing open wires insideFound meshes: turning them into Part shapesFound object with several coplanar faces: refining themFound 1 closed sketch object: creating a face from itFound closed wires: creating facesFound several wires or edges: wiring themFound several non-treatable objects: creating compoundUnable to upgrade these objectsFound 1 open wire: closing itFound 1 non-parametric object: replacing it with a Draft objectFound points: creating compoundTextNo TargetInvalid label typeTag not available for objectMaterial not available for objectPosition not available for (sub)objectLength not available for (sub)objectArea not available for (sub)objectVolume not available for (sub)objectOpening Multiple LinksMultiple links foundThis may lead to the opening of various windowsFile not found:Opening hyperlinkSelect 3 vertices, one or more shapes or an object to define a working planeDo you want to update the SVG pattern options
of existing objects in all opened documents?Sketch is too complex to edit: it is suggested to use the default Sketcher editorCreate layerRemove From LayerAdd to New LayerRemove from layerAdd to new layerAdd to layerLayers changeFlip DimensionToggle GridChange SlopeSelect exactly 2 objects, the base object and the path object, before calling this commandCreate Path ArrayCreate Path Twisted ArraySelect exactly 2 objects, the base object and the point object, before calling this commandCreate Point ArrayClick anywhere on a line to split itSplit LineNo active Draft toolbarConstruction ModeToggle Display Mode2 edges are neededEdges are not connected or radius is too largeUnable to build facebinderNo valid faces for facebinderUnable to build facebinder, resuming with sew disabledConverting flat B-spline faces of facebinder to planar faces failedActivate LayerReassign Properties of LayerSelect Layer ContentsAdd New LayerReassign Properties of All LayersMerge Layer DuplicatesThe DXF import/export libraries needed by FreeCAD to handle
the DXF format were not found on this system.
Please either allow FreeCAD to download these libraries:
1 - Load Draft workbench
2 - Menu Edit → Preferences → Import-Export → DXF → Enable downloads
Or download these libraries manually, as explained on
https://github.com/yorikvanhavre/Draft-dxf-importer
To enabled FreeCAD to download these libraries, answer Yes.PAT file not foundSpecified PAT file is not a fileSpecified file type is not supportedPattern not found in PAT fileWorkbenchDraft CreationDraft AnnotationDraft ModificationDraft UtilityDraft Snap&Drafting&Annotation&Modification&UtilitiesArc ToolsBézier ToolsArray ToolsDraftFilletDelete original objectsCreate chamferSave styleName of this new styleWarningName exists. Overwrite?Error: json module not found. Unable to load styleError: json module not found. Unable to save styleSlopeTrueFalseScaleX-factorY-factorZ-factorUniform scalingCopyModify subelementsPick From/To PointsEdit ScaleCreate a clone_BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.Writing camera positionWriting objects shown/hidden stateOnNameLine WidthDraw StyleLine ColorFace ColorLine Print ColorTransparencyNew LayerCustomLabelPositionLengthAreaVolumeTagMaterialLabel + PositionLabel + LengthLabel + AreaLabel + VolumeLabel + MaterialCreate CloneChoose a base object before using this commandOffset direction is not defined. Move the mouse on either side of the object first to indicate a direction.Point object does not have a discrete point, it cannot be used for an arrayDownload of DXF libraries failed.
Please install the DXF Library addon manually
from menu Tools → Addon ManagerimportOCAOCA: found no data to exportsuccessfully exportedImportAirfoilDATDid not find enough coordinatesImportSVGUnknown SVG export style, switching to TranslatedThe export list contains no object with a valid bounding boxDraft_LabelLabelCreates a label, optionally attached to a selected object or subelementDraft_LineLineCreates a 2-point lineDraft_WirePolylineCreates a polylineDraft_HatchHatchCreates hatches on the faces of a selected objectDraft_JoinJoinJoins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end.Draft_TextTextCreates a multi-line annotationDraft_MoveMoveMoves the selected objects.
If the "Copy" option is active, it creates displaced copies.Draft_ArcArcCreates a circular arc from a center point and a radiusDraft_EditEditEdits the active objectDraft_PointPointCreates a pointDraft_RotateRotateRotates the selected objects.
If the "Copy" option is active, it will create rotated copies.Draft_FilletFilletCreates a fillet between 2 selected edgesDraft_PolygonPolygonCreates a regular polygon (triangle, square, pentagon…)Draft_SplitSplitSplits the selected line or polyline at a specified pointDraft_TrimexTrimexTrims or extends the selected object, or extrudes single facesDraft_CircleCircleCreates a circle (full circular arc)Draft_EllipseEllipseCreates an ellipseDraft_FacebinderFacebinderCreates a facebinder from the selected facesDraft_OrthoArrayArrayCreates copies of the selected object in an orthogonal patternDraft_ScaleScaleScales the selected objects from a base pointDraft_LayerNew LayerAdds a layer to the document.
Objects added to this layer can share the same visual properties.Draft_DimensionDimensionCreates a linear dimension for a straight edge, a circular edge, or 2 picked points, or an angular dimension for 2 straight edgesDraft_StretchStretchStretches the selected objectsDraft_RectangleRectangleCreates a 2-point rectangleDraft_MirrorMirrorMirrors the selected objects along a line defined by 2 pointsDraft_CloneCloneCreates a clone of the selected objectsDraft_UpgradeUpgradeUpgrades the selected objects into more complex shapes.
The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
For example, it can join the selected objects into one, convert simple edges into parametric polylines,
convert closed edges into filled faces and parametric polygons, and merge faces into a single face.Draft_OffsetOffsetOffsets the selected object.
It can also create an offset copy of the original object.Draft_HealHealHeals faulty Draft objects saved with an earlier version of FreeCAD.
If an object is selected it tries to heal only that object,
otherwise it tries to heal all objects in the active document.Draft_DowngradeDowngradeDowngrades the selected objects into simpler shapes.
The result of the operation depends on the types of objects, which may be downgraded several times in a row.
For example, a 3D solid is deconstructed into separate faces, wires, and then edges. Faces can also be subtracted.App::PropertyThe placement of the base point of the first lineThe text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.Text stringFont file nameHeight of textHorizontal and vertical alignmentHeight reference used for justificationKeep left margin and leading white space when justification is leftScale to ensure cap height is equal to sizeInter-character spacingOblique (slant) angleFill letters with facesFuse faces if faces overlap, usually not required (can be very slow)The base object used by this objectThe PAT file used by this objectThe pattern name used by this objectThe pattern scale used by this objectThe pattern rotation used by this objectIf set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)The objects included in this cloneThe scale factor of this cloneIf Clones includes several objects,
set True for fusion or False for compoundAlways create a compoundStart angle of the arcEnd angle of the arc (for a full circle,
give it same value as First Angle)Radius of the circleCreate a faceThe area of this objectThe objects that are part of this layerNumber of facesRadius of the control circleHow the polygon must be drawn from the control circleRadius to use to fillet the cornersSize of the chamfer to give to the cornersThe base object that will be duplicated.The object along which the copies will be distributed. It must contain 'Edges'.Number of copies to create.Rotation factor of the twisted array.Show the individual array elements (only for Link arrays)The placement for each array elementThe position of the tip of the leader line.
This point can be decorated with an arrow or another symbol.Object, and optionally subelement, whose properties will be displayed
as 'Text', depending on 'Label Type'.
'Target' won't be used if 'Label Type' is set to 'Custom'.The list of points defining the leader line; normally a list of three points.
The first point should be the position of the text, that is, the 'Placement',
and the last point should be the tip of the line, that is, the 'Target Point'.
The middle point is calculated automatically depending on the chosen
'Straight Direction' and the 'Straight Distance' value and sign.
If 'Straight Direction' is set to 'Custom', the 'Points' property
can be set as a list of arbitrary points.The direction of the straight segment of the leader line.
If 'Custom' is chosen, the points of the leader can be specified by
assigning a custom list to the 'Points' attribute.The length of the straight segment of the leader line.
This is an oriented distance; if it is negative, the line will be drawn
to the left or below the 'Text', otherwise to the right or above it,
depending on the value of 'Straight Direction'.The placement of the 'Text' element in 3D spaceThe text to display when 'Label Type' is set to 'Custom'The text displayed by this label.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.The type of information displayed by this label.
If 'Custom' is chosen, the contents of 'Custom Text' will be used.
For other types, the string will be calculated automatically from the object defined in 'Target'.
'Tag' and 'Material' only work for objects that have these properties, like BIM objects.
For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.General scaling factor that affects the annotation consistently
because it scales the text, and the line decorations, if any,
in the same proportion.Annotation style to apply to this object.
When using a saved style some of the view properties will become read-only;
they will only be editable by changing the style through the 'Annotation style editor' tool.The base object that will be duplicatedList of connected edges in the 'Path Object'.
If these are present, the copies will be created along these subelements only.
Leave this property empty to create copies along the entire 'Path Object'.Force use of 'Vertical Vector' as local Z-direction when using 'Original' or 'Tangent' alignment modeNumber of copies to createAdditional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.Alignment vector for 'Tangent' modeDirection of the local Z axis when 'Force Vertical' is trueMethod to orient the copies along the path.
- Original: X is curve tangent, Y is normal, and Z is the cross product.
- Frenet: aligns the object following the local coordinate system along the path.
- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.Walk the path backwards.How copies are spaced.
- Fixed count: available path length (minus start and end offsets) is evenly divided into n.
- Fixed spacing: start at "Start offset" and place new copies after traveling a fixed distance along the path.
- Fixed count and spacing: same as "Fixed spacing", but also stop at given number of copies.Base fixed distance between elements.Use repeating spacing patterns instead of uniform spacing.Spacing is multiplied by a corresponding number in this sequence.Length from the start of the path to the first copy.Length from the end of the path to the last copy.Orient the copies along the path depending on the 'Align Mode'.
Otherwise the copies will have the same orientation as the original Base object.The type of array to create.
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circles around the base object.Specifies if the copies should be fused together if they touch each other (slower)Number of copies in X-directionNumber of copies in Y-directionNumber of copies in Z-directionDistance and orientation of intervals in X-directionDistance and orientation of intervals in Y-directionDistance and orientation of intervals in Z-directionThe axis direction around which the elements in a polar or a circular array will be createdCenter point for polar and circular arrays.
The 'Axis' passes through this point.The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
Its placement, position and rotation, will be used when creating polar and circular arrays.
Leave this property empty to be able to set 'Axis' and 'Center' manually.Number of copies in the polar directionDistance and orientation of intervals in 'Axis' directionAngle to cover with copiesDistance between concentric circlesDistance between copies in the same circleNumber of concentric circle. The 'Base' object counts as one circle.A parameter that determines how many symmetry planes the circular array will haveTotal number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.Base object that will be duplicatedObject containing points used to distribute the copies.Number of copies in the array.
This property is read-only, as the number depends on the points in 'Point Object'.Additional placement, shift and rotation, that will be applied to each copyThe base object this 2D view must representThe projection vector of this objectThe way the viewed object must be projectedThe indices of the faces to be projected in Individual Faces modeShow hidden linesFuse wall and structure objects of same type and materialTessellate Ellipses and B-splines into line segmentsFor Cutlines and Cutfaces modes, this leaves the faces at the cut locationLength of line segments if tessellating Ellipses or B-splines into line segmentsIf this is True, this object will include only visible objectsA list of exclusion points. Any edge touching any of those points will not be drawn.A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.If this is True, only solid geometry is handled. This overrides the base object's Only Solids propertyIf this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip propertyThis object will be recomputed only if this is True.The points of the Bezier curveThe degree of the Bezier functionContinuityIf the Bezier curve should be closed or notCreate a face if this curve is closedThe length of this objectThe placement of this objectX LocationY LocationZ LocationStart angle of the elliptical arcEnd angle of the elliptical arc
(for a full circle, give it same value as First Angle)Minor radius of the ellipseMajor radius of the ellipseArea of this objectThe start point of this line.The end point of this line.The length of this line.Radius to use to fillet the corner.The normal direction of the text of the dimensionThe object measured by this dimensionThe object, and specific subelements of it,
that this dimension is measuring.
There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.A point through which the dimension line, or an extrapolation of it, will pass.
- For linear dimensions, this property controls how close the dimension line
is to the measured object.
- For radial dimensions, this controls the direction of the dimension line
that displays the measured radius or diameter.
- For angular dimensions, this controls the radius of the dimension arc
that displays the measured angle.Starting point of the dimension line.
If it is a radius dimension it will be the center of the arc.
If it is a diameter dimension it will be a point that lies on the arc.Ending point of the dimension line.
If it is a radius or diameter dimension
it will be a point that lies on the arc.The direction of the dimension line.
If this remains '(0,0,0)', the direction will be calculated automatically.The value of the measurement.
This property is read-only because the value is calculated
from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.When measuring circular arcs, it determines whether to display
the radius or the diameter valueStarting angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.Ending angle of the dimension line (circular arc).
The arc is drawn counter-clockwise.The center point of the dimension line, which is a circular arc.
This is normally the point where two line segments, or their extensions
intersect, resulting in the measured 'Angle' between them.The value of the measurement.
This property is read-only because the value is calculated from
the 'First Angle' and 'Last Angle' properties.Length of the rectangleHeight of the rectangleHorizontal subdivisions of this rectangleVertical subdivisions of this rectangleLinked facesSpecifies if splitter lines must be removedAn optional extrusion value to be applied to all facesAn optional offset value to be applied to all facesThis specifies if the shapes sewThe area of the faces of this FacebinderThe components of this blockThe vertices of the wireIf the wire is closed or notThe base object is the wire, it's formed from 2 objectsThe tool object is the wire, it's formed from 2 objectsThe start point of this lineThe end point of this lineThe length of this lineCreate a face if this object is closedThe number of subdivisions of each edgeThe points of the B-splineIf the B-spline is closed or notCreate a face if this B-spline is closedParameterization factorForce sync pattern placements even when array elements are expandedShow the individual array elementsText colorLine spacing (relative to font size)Vertical alignmentMaximum number of characters on each line of the text boxHorizontal alignmentThe type of frame around the text of this objectDisplay a leader line or notLine widthLine colorDefines an SVG pattern.Defines the size of the SVG pattern.If it is true, the objects contained within this layer will adopt the line color of the layerIf it is true, the objects contained within this layer will adopt the shape appearance of the layerIf it is true, the print color will be used when objects in this layer are placed on a TechDraw pageThe line color of the objects contained within this layerThe shape color of the objects contained within this layerThe shape appearance of the objects contained within this layerThe line width of the objects contained within this layerThe draw style of the objects contained within this layerThe transparency of the objects contained within this layerThe line color of the objects contained within this layer, when used on a TechDraw pageFont nameFont sizeSpacing between text and dimension lineRotate the dimension text 180 degreesText Position.
Leave '(0,0,0)' for automatic positionText override.
Write '$dim' so that it is replaced by the dimension length.The number of decimals to showShow the unit suffixA unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notationArrow sizeArrow typeRotate the dimension arrows 180 degreesThe distance the dimension line is extended
past the extension linesLength of the extension linesLength of the extension line
beyond the dimension lineShows the dimension line and arrowsThe display length of this section planeThe size of the arrows of this section planeDefines a texture image (overrides hatch patterns)CommandTransformQObjectDraftImport-ExportDraft_AnnotationStyleEditorAnnotation StylesOpens an editor to manage or create annotation stylesDraft_Arc_3PointsArc From 3 PointsCreates a circular arc from 3 pointsDraft_ArcToolsArc ToolsTools to create various types of circular arcsDraft_ArrayToolsArray ToolsTools to create various types of arrays, including rectangular, polar, circular, path, and point arraysDraft_BezCurveBézier CurveCreates an n-degree Bézier curve. The more points, the higher the degree.Draft_CubicBezCurveCubic Bézier CurveCreates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Clicking and dragging allows to define segments.
Control points and properties of each knot can be edited after creation.Draft_BezierToolsBézier ToolsTools to create various types of Bézier curvesDraft_CircularArrayCircular ArrayCreates copies of the selected object in a radial pattern with 1 or more circular layersDraft_FlipDimensionFlip DimensionFlips the normal direction of the selected dimensions (linear, radial, angular).
If other objects are selected they are ignored.Draft_Draft2SketchDraft to SketchConverts bidirectionally between Draft objects and sketches.
Multiple selected Draft objects are converted into a single sketch.
However, a single sketch with disconnected traces is converted into several individual Draft objects.Draft_ToggleGridToggle GridToggles the visibility of the Draft gridDraft_AddToGroupAdd to GroupAdds selected objects to a group, or removes them from any groupDraft_SelectGroupSelect GroupSelects the contents of selected groups. For selected non-group objects, the contents of the group they are in are selected.Draft_AutoGroupAuto-GroupAdds new Draft and BIM objects to the selected layer or groupDraft_AddConstructionAdd to Construction GroupAdds the selected objects to the construction group,
and changes their appearance to the construction style.
The construction group is created if it does not exist.Draft_AddNamedGroupNew Named GroupAdds a group with a given nameDraft_HyperlinkOpen LinksOpens linked documentsDraft_AddToLayerAdd to LayerAdds selected objects to a layer, or removes them from any layerDraft_LayerManagerManage LayersAllows to modify the layersDraft_SlopeSet SlopeSets the slope of the selected line by changing the value of the Z value of one of its points.
If a polyline is selected, it will apply the slope transformation to each of its segments.
The slope will always change the Z value, therefore this command only works well for
straight Draft lines that are drawn on the XY-plane.Draft_PathArrayPath ArrayCreates copies of the selected object along a selected pathDraft_PathLinkArrayPath Link ArrayCreates linked copies of the selected object along a selected pathDraft_PathTwistedArrayTwisted Path ArrayCreates twisted copies of the selected object along a selected pathDraft_PathTwistedLinkArrayTwisted Path Link ArrayCreates twisted linked copies of the selected object along a selected pathDraft_WorkingPlaneProxyWorking Plane ProxyCreates a proxy object from the current working plane that allows to restore the camera position and visibility of objectsDraft_PointArrayPoint ArrayCreates copies of the selected object at the points of a point objectDraft_PointLinkArrayPoint Link ArrayCreates linked copies of the selected object at the points of a point objectDraft_PolarArrayPolar ArrayCreates copies of the selected object in a polar patternDraft_SelectPlaneWorking PlaneDefines the working plane from 3 vertices, 1 or more shapes, or an objectDraft_SetStyleSet StyleSets the default style and can apply the style to objectsDraft_Shape2DViewShape 2D ViewCreates a 2D projection of the selected objects on the XY-plane.
The initial projection direction is the opposite of the current active view direction.Draft_ShapeStringShape From TextCreates a shape from a text string and a specified fontDraft_Snap_LockSnap LockEnables or disables snapping globallyDraft_Snap_MidpointSnap MidpointSnaps to the midpoint of edgesDraft_Snap_PerpendicularSnap PerpendicularSnaps to the perpendicular points on faces and edgesDraft_Snap_GridSnap GridSnaps to the intersections of grid linesDraft_Snap_IntersectionSnap IntersectionSnaps to the intersection of 2 edges, and the intersection of a face and an edgeDraft_Snap_ParallelSnap ParallelSnaps to an imaginary line parallel to straight edgesDraft_Snap_EndpointSnap EndpointSnaps to the endpoints of edgesDraft_Snap_AngleSnap AngleSnaps to the special cardinal points on circular edges, at multiples of 30° and 45°Draft_Snap_CenterSnap CenterSnaps to the center point of faces and circular edges, and to the placement point of working plane proxies and building partsDraft_Snap_ExtensionSnap ExtensionSnaps to an imaginary line that extends beyond the endpoints of straight edgesDraft_Snap_NearSnap NearSnaps to the nearest point on faces and edgesDraft_Snap_OrthoSnap OrthoSnaps to imaginary lines that cross the previous point at multiples of 45°Draft_Snap_SpecialSnap SpecialSnaps to special points defined by the objectDraft_Snap_DimensionsSnap DimensionsShows temporary X and Y dimensionsDraft_Snap_WorkingPlaneSnap Working PlaneProjects snap points onto the current working planeDraft_ShowSnapBarShow Snap ToolbarShows the snap toolbar if it is hiddenDraft_BSplineB-SplineCreates a multiple-point B-splineDraft_ApplyStyleApply Current StyleApplies the current style to the selected objects and groupsDraft_SubelementHighlightHighlight SubelementsHighlights the subelements of the selected objects, to be able to move, rotate, and scale themDraft_ToggleConstructionModeToggle Construction ModeToggles the construction modeDraft_ToggleDisplayModeToggle WireframeSwitches the view style of the selected objects from Flat Lines to Wireframe and backDraft_WireToBSplineConvert Wire/B-SplineConverts the selected polyline to a B-spline, or the selected B-spline to a polylineDxfImportDialogDXF ImportImport AsCreates fully parametric Draft objects. Block definitions are imported as
reusable objects (Part Compounds) and instances become `App::Link` objects,
maintaining the block structure. Best for full integration with the Draft
workbench.Editable Draft objectsCreates parametric Part objects (e.g., Part::Line, Part::Circle). Block
definitions are imported as reusable objects (Part Compounds) and instances
become `App::Link` objects, maintaining the block structure. Best for
script-based post-processing.Editable Part primitivesCreates a non-parametric shape for each DXF entity. Block definitions are
imported as reusable objects (Part Compounds) and instances become `App::Link`
objects, maintaining the block structure. Good for referencing and measuring.Individual Part shapes (recommended)Merges all geometry per layer into a single, non-editable shape. Block
structures are not preserved; their geometry becomes part of the layer's
shape. Best for viewing very large files with maximum performance.Fused Part shapes (fastest)File summaryWarningDo not show this dialog again