# Router Firewall ## localhost - public - internal This example is for small corporate firewall: * Single firewall computer that runs: * DHCP server * DNS resolver * Email and all other services are run on cloud * Multiple laptops and workstations in internal network * Bidirectional firewalling ``` mermaid flowchart LR public@{shape: cloud} <--> localhost@{shape: stadium} subgraph Local Network localhost <--> internal end ``` ``` zone { localhost public eth0 internal eth1 } snat { # Masquerade traffic from internal to public. saddr 10.0.0.0/8 oifname eth0 masquerade } public-localhost { # Allow only ping and SSH to localhost. ping saddr_rate "5/second burst 20" ssh saddr_rate "5/minute burst 5" # If localhost gets its public IP with DHCP, add "dhcp-client" here. drop log } internal-localhost { # localhost runs DHCP (IPv4 and IPv6) server and DNS resolver for internal # network, plus basic SSH etc. rules. dhcp-server dhcpv6-server domain domain-s ntp ping ssh reject log } template outgoing_services { # Shared list of services for localhost-public and internal-public. domain domain-s http https ntp ping smtp ssh } localhost-public { # Basic services from localhost to internet: DNS queries, HTTPS, SSH, etc. # Allow also SMTP so that localhost can send email. template outgoing_services # If localhost gets its public IP with DHCP, add "dhcp-server" here and # "dhcp-client" to public-localhost. reject log } internal-public { # Laptops and workstations in internal network can access web and # email services in internet. This ruleset is similar as localhost-public # in host firewall example. This is the most important zone-zone # section to configure. template outgoing_services googlemeet imap reject log } public-internal { # No traffic is allowed from internet to internal network. drop log } localhost-internal { # DHCP server reply packets dhcp-client dhcpv6-client # Very limited access from localhost to internal network. ping ssh reject log } ``` ### Enable packet forwarding For public-internal and other forwarding you must enable IP packet forwarding on Linux kernel. That can be done by creating `/etc/sysctl.d/50-ip.forwarding.conf` file with following lines: ``` # Enable IP packet forwarding net.ipv4.conf.all.forwarding = 1 net.ipv6.conf.all.forwarding = 1 ``` ## localhost - public - dmz - internal This example is for larger corporate firewall: * Single firewall computer that runs: * DHCP server * DNS resolver * Single dmz computer that runs: * Web server * Email server * Multiple laptops and workstations in internal network * Bidirectional firewalling See also note about enabling IP packet forwarding above. ``` mermaid flowchart LR public@{shape: cloud} <--> localhost@{shape: stadium} subgraph Local Network localhost <--> internal localhost <--> dmz end ``` ``` zone { localhost public eth0 internal eth1 dmz eth2 } snat { # Masquerade traffic from internal to public. saddr 10.0.0.0/8 oifname eth0 masquerade } dnat { # DNAT incoming SMTP and HTTPS traffic from public to dmz server. This # section is needed only if dmz server doesn't have public IP address. iifname eth0 smtp http https dnat 10.1.0.2 # public -> dmz iifname eth1 daddr 192.0.2.32 smtp http https dnat 10.1.0.2 # internal -> dmz } macro { # Define rate limits as macros as same limits are used in public-localhost # and in public-dmz. http_rate saddr_rate "100/second burst 400" saddr_rate_name http_limit mail_rate saddr_rate "1/second burst 10" ping_rate saddr_rate "5/second burst 20" ssh_rate saddr_rate "5/minute burst 5" } template localhost_services { # Shared list of services running on localhost. It runs DHCP server and DNS # resolver for internal and dmz networks, plus basic SSH etc. rules. dhcp-server dhcpv6-server domain domain-s ntp ping ssh } public-localhost { # Allow only ping and SSH from internet to localhost. ping ping_rate ssh ssh_rate drop log } internal-localhost { # Servers on internal network can access localhost's basic services. template localhost_services reject log } dmz-localhost { # Servers on dmz can access localhost's basic services, similar to # internal-localhost. template localhost_services reject log } template public_services { # Shared list of services that run on internet. domain domain-s http https ntp ping ssh } localhost-public { # Basic services from localhost to internet: DNS queries, HTTPS, SSH, etc. template public_services reject log } internal-public { # Basic services from internal to internet: DNS queries, HTTPS, SSH, etc. template public_services googlemeet reject log } dmz-public { # Basic services from dmz to internet, plus SMTP for email transfer.. template public_services smtp reject log } public-internal { # No traffic is allowed from internet to internal network. drop log } localhost-internal { # DHCP server reply packets dhcp-client dhcpv6-client # Very limited access from localhost to internal network. ping ssh reject log } dmz-internal { # Servers on dmz don't need any access to internal network. reject log } template dmz_services { # Shared list of services that run on dmz. http https ping smtp ssh } localhost-dmz { # DHCP server reply packets dhcp-client dhcpv6-client # localhost can access dmz server services. template dmz_services reject log } public-dmz { # Allow traffic from internet to dmz server with rate limits. http http_rate https http_rate smtp mail_rate ping ping_rate ssh ssh_rate drop log } internal-dmz { # Laptops and workstations in internal network can access dmz server # services, plus IMAP for reading email. template dmz_services imap reject log } ```