# dnat Destination NAT is used to mangle traffic by using standard [rules](../rule/index.md). Example: ``` dnat { # http traffic to 10.0.0.1 is DNAT'ed to 10.0.0.2 port 8080 daddr 10.0.0.1 http dnat 10.0.0.2:8080 # http traffic to fd00:f00::1 is DNAT'ed to fd00:f00::2 port 8080 daddr fd00:f00::1 http dnat [fd00:f00::2]:8080 # http traffic to 10.0.0.6 is DNAT'ed to 10.0.0.7, port doesn't change daddr 10.0.0.6 http dnat 10.0.0.7 # All smtp traffic from eth2 is DNAT'ed to 10.0.0.8 or fd00:f00::8, # port doesn't change iifname eth2 smtp dnat 10.0.0.8 fd00:f00::8 # All traffic from eth1 inteface is DNAT'ed to 10.0.0.3 iifname eth1 dnat 10.0.0.3 # http traffic to 10.0.0.4 coming from interface eth2 is DNAT'ed to 10.0.0.5 iifname eth2 daddr 10.0.0.4 http dnat 10.0.0.5 # http traffic to localhost coming from interface eth3 is DNAT'ed to 10.0.0.6 iifname eth3 oifname lo http dnat 10.0.0.6 } ``` Remember to accept DNAT'ed traffic in zone-zone section. This can be done with specific rule or with `ct_status` matcher. Example: ``` public-internal { # Specific rule to accept https https daddr 10.0.0.9 # Generic rule to accept all DNAT'ed traffic ct_status dnat } ```