@c -*-texinfo-*- @c This is part of the FisicaLab User Manual. @c Copyright (C) 2013 German A. Arias. @c See the file copying.texinfo for copying conditions. @node Kinematics, Examples kinematics of particles, Welcome, Top @chapter Module kinematics of particles @cindex Module kinematics of particles The conversion factors for SI system are: @sp 2 @table @strong @item km kilometer @item cm centimeter @item mm millimeter @item mi mile @item ft feet @item in inch @item h hour @item min minute @item km/h kilometers per hour @item cm/s centimeters per second @item mm/s millimeters per second @item mph miles per hour @item ft/s feet per second @item in/s inch per second @item kt knot @item cm/s2 centimeters per squared second @item mm/s2 millimeters per squared second @item ft/s2 feet per squared second @item in/s2 inch per squared second @end table @page And for the English system are: @sp 2 @table @strong @item km kilometer @item m meter @item cm centimeter @item mm millimeter @item mi mile @item in inch @item h hour @item min minute @item km/h kilometers per hour @item m/s meters per second @item cm/s centimeters per second @item mm/s millimeters per second @item mph miles per hour @item in/s inch per second @item kt knot @item m/s2 meters per squared second @item cm/s2 centimeters per squared second @item mm/s2 millimeters per squared second @item in/s2 inch per squared second @end table @sp 2 This module have 15 elements, presented below. With a description of each one, its data and its number of equations. @page @menu * Stationary reference system: Stationary reference system (k). * Mobile reference system: Mobile reference system (k). * Mobile reference system in X/Y: Mobile reference system in X/Y (k). * Mobile: Mobile (k). * Mobile in X/Y: Mobile in X/Y (k). * Mobile in X/Y with constant velocity: Mobile in X/Y with constant velocity (k). * Cannon: Cannon (k). * Mobile radial: Mobile radial (k). * Distance: Distance (k). * Distance XY: Distance XY (k). * Point: Point (k). * Relative velocity: Relative velocity (k). @end menu @node Stationary reference system (k), Mobile reference system (k), Kinematics, Kinematics @section Stationary reference system @cindex Stationary reference system (k) @image{s_fijo} An stationary reference system, with the X axis horizontal and positive to the right, and the Y axis vertical and positive to upwards. @multitable @columnfractions .15 .6 @item Equations: @tab None. @headitem Data: @tab @item t: @tab End time of the problem. @end multitable @page @node Mobile reference system (k), Mobile reference system in X/Y (k), Stationary reference system (k), Kinematics @section Mobile reference system @cindex Mobile reference system (k) @image{s_movil} A mobile reference system. @multitable @columnfractions .15 .6 @item Equations: @tab 4 @headitem Data: @tab @item Name: @tab Name of the mobile system. @item Object: @tab Name of the object inside the mobile system. @item xsi: @tab Initial X coordinate of the mobile system in reference to the stationary system. @item ysi: @tab Initial Y coordinate of the mobile system in reference to the stationary system. @item vsx: @tab Velocity in X of the mobile system. @item vsy: @tab Velocity in Y of the mobile system. @item xof: @tab Final X coordinate of the object in reference to the stationary system. @item yof: @tab Final Y coordinate of the object in reference to the stationary system. @item vxof: @tab Final velocity in X of the object in reference to the stationary system. @item vyof: @tab Final velocity in Y of the object in reference to the stationary system. @end multitable @page @node Mobile reference system in X/Y (k), Mobile (k), Mobile reference system (k), Kinematics @section Mobile reference system in X/Y @cindex Mobile reference system in X/Y (k) @image{s_movil_x} @image{s_movil_y} Mobile reference systems in X and Y, respectively. @multitable @columnfractions .15 .6 @item Equations: @tab 2 @headitem Data: @tab @item Name: @tab Name of the mobile system. @item Object: @tab Name of the object inside the mobile system. @item xsi (ysi): @tab Initial X (Y) coordinate of the mobile system in reference to the stationary system. @item vsx (vsy): @tab Velocity in X (Y) of the mobile system. @item xof (yof): @tab Final X (Y) coordinate of the object in reference to the stationary system. @item vxof (vyof): @tab Final velocity in X (Y) of the object in reference to the stationary system. @end multitable @page @node Mobile (k), Mobile in X/Y (k), Mobile reference system in X/Y (k), Kinematics @section Mobile @cindex Mobile (k) @image{particula} A general mobile. @multitable @columnfractions .15 .6 @item Equations: @tab 4 @headitem Data: @tab @item Name: @tab Name of the mobile. @item ax: @tab Acceleration in X. @item ay: @tab Acceleration in Y. @item xi: @tab Initial coordinate in X. @item yi: @tab Initial coordinate in Y. @item vxi: @tab Initial velocity in X. @item vyi: @tab Initial velocity in Y. @item ti: @tab Time at which movement begins. @item xf: @tab Final X coordinate. @item yf: @tab Final Y coordinate. @item vxf: @tab Final velocity in X. @item vyf: @tab Final velocity in Y. @end multitable @page @node Mobile in X/Y (k), Mobile in X/Y with constant velocity (k), Mobile (k), Kinematics @section Mobile in X/Y @cindex Mobile in X/Y (k) @image{movil_x} @image{movil_y} Mobiles in X and Y respectively. @multitable @columnfractions .15 .6 @item Equations: @tab 2 @headitem Data: @tab @item Name: @tab Name of the mobile. @item ax (ay): @tab Acceleration in X (Y). @item xi (yi): @tab Initial coordinate in X (Y). @item vxi (vyi): @tab Initial velocity in X (Y). @item ti: @tab Time at which movement begins. @item xf (yf): @tab Final X (Y) coordinate. @item vxf (vyf): @tab Final X (Y) coordinate. @end multitable @page @node Mobile in X/Y with constant velocity (k), Cannon (k), Mobile in X/Y (k), Kinematics @section Mobile in X/Y with constant velocity @cindex Mobile in X/Y with constant velocity (k) @image{movil_x_const} @image{movil_y_const} Mobiles in X and Y with constant velocity, respectively. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Name: @tab Name of the mobile. @item xi (yi): @tab Initial X (Y) coordinate. @item xf (yf): @tab Final X (Y) coordinate. @item ti: @tab Time at which movement begins. @item vx (vy): @tab Constant velocity in X (Y). @end multitable @page @node Cannon (k), Mobile radial (k), Mobile in X/Y with constant velocity (k), Kinematics @section Cannon @cindex Cannon (k) @image{canon} Cannon to simulate parabolic shots. The angles are measured from the positive X axis, and the positive sense is the opposite of clockwise. @multitable @columnfractions .15 .6 @item Equations: @tab 4 @headitem Data: @tab @item Name: @tab Name of the cannon. @item ax: @tab Acceleration in X axis. @item ay: @tab Acceleration in Y axis. @item xi: @tab Initial X coordinate. @item yi: @tab Initial Y coordinate. @item vi: @tab Initial velocity. @item angi: @tab Angle of the launch. @item ti: @tab Time at which movement begins. @item xf: @tab Final X coordinate. @item yf: @tab Final Y coordinate. @item vf: @tab Final velocity. @item angf: @tab Angle of the final velocity vector. @end multitable @page @node Mobile radial (k), Distance (k), Cannon (k), Kinematics @section Mobile radial @cindex Mobile radial (k) @image{p_radial} Mobile radial with velocity and acceleration along the direction specify by the angle. The angle is measured from the positive X axis, and the positive sense is the opposite of the clockwise. @multitable @columnfractions .15 .6 @item Equations: @tab 3 @headitem Data: @tab @item Name: @tab Name of the mobile. @item a: @tab Acceleration. @item angf: @tab Angle that specify the direction. @item xi: @tab Initial X coordinate. @item yi: @tab Initial Y coordinate. @item vi: @tab Initial velocity. @item ti: @tab Time at which movement begins. @item xf: @tab Final X coordinate. @item yf: @tab Final Y coordinate. @item vf: @tab Final velocity. @end multitable @page @node Distance (k), Distance XY (k), Mobile radial (k), Kinematics @section Distance @cindex Distance (k) @image{distancia} To measured the distance between mobiles, at end time. Or between a mobile and one point. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object 1: @tab Name of the first object. @item Object 2: @tab Name of the second object. @item d: @tab Distance between the objects. @end multitable @node Distance XY (k), Point (k), Distance (k), Kinematics @section Distance XY @cindex Distance XY (k) @image{distancia_xy} To measured the distance between objects along one axis (X or Y). @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item x1 (y1): @tab X or Y coordinate of the first object. @item x2 (y2): @tab X or Y coordinate of the second object. @item x1 - x2 (y1 - y2): @tab Difference between x1 and x2 (or between y1 and y2). @end multitable @page @node Point (k), Relative velocity (k), Distance XY (k), Kinematics @section Point @cindex Point (k) @image{punto} Point of reference to measured a distance. @multitable @columnfractions .15 .6 @item Equations: @tab None. @headitem Data: @tab @item xf: @tab X coordinate of the point. @item yf: @tab Y coordinate of the point. @end multitable @node Relative velocity (k), , Point (k), Kinematics @section Relative velocity @cindex Relative velocity (k) @image{v_rel} Measured the vector relative velocity (magnitude and angle) of the Object 1 relative to Object 2. The angles are measured from the positive X axis, and the positive sense is the opposite of the clockwise. @multitable @columnfractions .15 .6 @item Equations: @tab 2 @headitem Data: @tab @item Object 1: @tab Object that relative velocity you want. @item Object 2: @tab Object reference to measured the relative velocity. @item v: @tab Magnitude of the vector relative velocity. @item ang: @tab Angle of the vector relative velocity. @end multitable