@c -*-texinfo-*- @c This is part of the FisicaLab User Manual. @c Copyright (C) 2013 German A. Arias. @c See the file copying.texinfo for copying conditions. @node Circular kinematics, Examples circular kinematics of particles, Examples kinematics of particles, Top @chapter Module circular kinematics of particles @cindex Module circular kinematics of particles The conversion factors for SI system are: @sp 2 @table @strong @item km kilometer @item cm centimeter @item mm millimeter @item mi miles @item ft feet @item in inch @item h hour @item min minute @item km/h kilometer per hour @item cm/s centimeter per second @item mm/s millimeter per second @item mph miles per hour @item ft/s feet per second @item in/s inch per second @item kt knot @item cm/s2 centimeters per squared second @item mm/s2 millimeters per squared second @item ft/s2 feet per squared second @item in/s2 inch per squared second @item rad radian @item rpm revolutions per minute @end table @page And for the English system are: @sp 2 @table @strong @item km kilometer @item m meter @item cm centimeter @item mm millimeter @item mi miles @item in inch @item h hour @item min minute @item km/h kilometers per hour @item m/s meters per second @item cm/s centimeters per second @item mm/s millimeters per second @item mph miles per hour @item in/s inch per second @item kt knot @item m/s2 meters per squared second @item cm/s2 centimeters per squared second @item mm/s2 millimeters per squared second @item in/s2 inch per squared second @item rad radian @item rpm revolutions per minute @end table @sp 2 This module have 14 elements, presented below. With a description of each one, its data and its number of equations. @menu * Stationary reference system: Stationary reference system (ck). * Mobile with circular motion: Mobile circular (ck). * Mobile with polar circular motion: Mobile polar (ck). * Angular velocity: Angular velocity (ck). * Angular acceleration: Angular acceleration (ck). * Total acceleration: Total acceleration (ck). * Frequency: Frequency (ck). * Period: Period (ck). * Number of laps: Number of laps (ck). * Center of rotation: Center of rotation (ck). * Distance: Distance (ck). * Arc length: Arc length (ck). * Coordinate: Coordinate (ck). * Relative velocity: Relative velocity (ck). @end menu @node Stationary reference system (ck), Mobile circular (ck), Circular kinematics, Circular kinematics @section Stationary reference system @cindex Stationary reference system (ck) @image{s_fijo} An stationary reference system, with the X axis horizontal and positive to the right, and the Y axis vertical and positive to upwards. @multitable @columnfractions .15 .6 @item Equations: @tab None. @headitem Data: @tab @item t: @tab End time of the problem. @end multitable @page @node Mobile circular (ck), Mobile polar (ck), Stationary reference system (ck), Circular kinematics @section Mobile with circular motion @cindex Mobile with circular motion (ck) @image{m_circular} Mobile with circular motion (constant radius). The angles are measured from the positive X axis, the positive sense is the opposite of clockwise. Also, a positive value of the tangential velocity, mean that the mobile tour in the opposite sense of clockwise. @multitable @columnfractions .15 .6 @item Equations: @tab 4 @headitem Data: @tab @item Name: @tab Name of the mobile. @item C: @tab Point that makes the center of rotation. If not specified the origin is the center. @item r: @tab Radius of circular motion. @item aci: @tab Centripetal acceleration at initial time. @item at: @tab Tangential acceleration. @item angi: @tab Angle of the initial position. @item vi: @tab Initial tangential velocity. @item ti: @tab Time at which movements begins. @item angf: @tab Angle of the final position. @item vf: @tab Final tangential velocity. @item acf: @tab Centripetal acceleration at end time. @end multitable @page @node Mobile polar (ck), Angular velocity (ck), Mobile circular (ck), Circular kinematics @section Mobile with polar circular motion @cindex Mobile with polar circular motion (ck) @image{m_polar} Mobile with circular motion described by polar coordinates. The angles are measured from the X axis, the positive sense is the opposite of clockwise. Also, a positive value to angular velocity, mean that the mobile tour in the opposite sense of clockwise. And a positive value to radial velocity, indicates that the mobile moves away from the center of rotation. @multitable @columnfractions .15 .6 @item Equations: @tab 4 @headitem Data: @tab @item Name: @tab Name of the mobile. @item C: @tab Point that makes the center of rotation. If not specified the origin is the center. @item aa: @tab Angular acceleration. @item ar: @tab Radial Acceleration. @item angi: @tab Angle of the initial position. @item ri: @tab Initial radius of the mobile. @item vai: @tab Initial angular velocity. @item vri: @tab Initial radial velocity. @item ti: @tab Time at which movements begins. @item angf: @tab Angle of the final position. @item rf: @tab Final radius of the mobile. @item vaf: @tab Final angular velocity. @item vrf: @tab Final radial velocity. @end multitable @page @node Angular velocity (ck), Angular acceleration (ck), Mobile polar (ck), Circular kinematics @section Angular velocity @cindex Angular velocity (ck) @image{v_angular} Measure the angular velocity of the mobile indicated. Only applies to elements Mobile with circular motion. @multitable @columnfractions .15 .6 @item Equations: @tab 2 @headitem Data: @tab @item Object: @tab Name of the mobile. @item vangi: @tab Angular velocity at initial time. @item vangf: @tab Angular velocity at end time. @end multitable @node Angular acceleration (ck), Total acceleration (ck), Angular velocity (ck), Circular kinematics @section Angular acceleration @cindex Angular acceleration (ck) @image{a_angular} Measure the angular acceleration of the mobile indicated. Only applies to elements Mobile with circular motion. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object: @tab Name of the mobile. @item aang: @tab Angular acceleration. @end multitable @page @node Total acceleration (ck), Frequency (ck), Angular acceleration (ck), Circular kinematics @section Total acceleration @cindex Total acceleration (ck) @image{acel_total} Measure the total acceleration of the mobile indicated. The angle is measured from the radius vector, the positive sense is the opposite of clockwise. @multitable @columnfractions .15 .6 @item Equations: @tab 4 @headitem Data: @tab @item Object: @tab Name of the mobile. @item atoti: @tab Magnitude of total acceleration at initial time. @item aangi: @tab The angle of the initial total acceleration vector. @item atotf: @tab Magnitude of total acceleration at end time. @item aangf: @tab The angle of the end total acceleration vector. @end multitable @node Frequency (ck), Period (ck), Total acceleration (ck), Circular kinematics @section Frequency @cindex Frequency (ck) @image{frecuencia} Measure the frequency of the mobile indicated. If the mobile have a tangential o radial acceleration, the measured frequency is the average value. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object: @tab Name of the mobile. @item f: @tab Frequency. @end multitable @page @node Period (ck), Number of laps (ck), Frequency (ck), Circular kinematics @section Period @cindex Period (ck) @image{periodo} Measure the period of the mobile indicated. If the mobile have a tangential o radial acceleration, the measured period is the average value. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object: @tab Name of the mobile. @item T: @tab Period. @end multitable @node Number of laps (ck), Center of rotation (ck), Period (ck), Circular kinematics @section Number of laps @cindex Number of laps (ck) @image{vueltas} Measure the number of laps of the mobile indicated. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object: @tab Name of the mobile. @item n: @tab Number of laps. @end multitable @page @node Center of rotation (ck), Distance (ck), Number of laps (ck), Circular kinematics @section Center of rotation @cindex Center of rotation (ck) @image{p_estatica} Especifica un centro de rotaci@'on. @multitable @columnfractions .15 .6 @item Equations: @tab None @headitem Data: @tab @item Name: @tab Name of the point. @item x: @tab X coordinate of the point. @item y: @tab Y coordinate of the point. @end multitable @node Distance (ck), Arc length (ck), Center of rotation (ck), Circular kinematics @section Distance @cindex Distance (ck) @image{distancia} Measure the distance between two mobiles at final time. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object 1: @tab Name of the first object. @item Object 2: @tab Name of the second object. @item d: @tab Distance between the mobiles. @end multitable @page @node Arc length (ck), Coordinate (ck), Distance (ck), Circular kinematics @section Arc length @cindex Arc length (ck) @image{arco} Measure the length of the arc described by the mobile indicated. If the mobile have a radial motion, the measured value is approximate. @multitable @columnfractions .15 .6 @item Equations: @tab 1 @headitem Data: @tab @item Object: @tab Name of the mobile. @item s: @tab Arc length. @end multitable @node Coordinate (ck), Relative velocity (ck), Arc length (ck), Circular kinematics @section Coordinate @cindex Coordinate (ck) @image{coordenada} Get the coordinate of the specified mobile at the end time. @multitable @columnfractions .15 .6 @item Equations: @tab 2 @headitem Data: @tab @item Object: @tab Name of the mobile. @item x: @tab X coordinate. @item y: @tab Y coordinate. @end multitable @page @node Relative velocity (ck), , Coordinate (ck), Circular kinematics @section Relative velocity @cindex Relative velocity (ck) @image{v_rel} Measure the relative velocity of mobile Object 1 relative to mobile Object 2. The angle is measured from the positive X axis, the positive sense is the opposite of clockwise. Also, this element can be used to measure the relative velocity (in this case the total velocity) of a Mobile with polar circular motion relative to its center of rotation. @multitable @columnfractions .15 .6 @item Equations: @tab 2 @headitem Data: @tab @item Object 1: @tab Name of first mobile. @item Object 2: @tab Name of second mobile. @item v: @tab Magnitude of the relative velocity. @item ang: @tab Angle of the relative velocity vector. @end multitable