#! /bin/bash #********************************************************************* # # fai-mk-network -- setup a test network for FAI # # This script is part of FAI (Fully Automatic Installation) # (c) 2015-2022 by Thomas Lange, lange@cs.uni-koeln.de # Universitaet zu Koeln # #********************************************************************* PATH=/sbin:/bin:/usr/sbin:/usr/bin tapnum=9 # how many tap devies will be created brip=192.168.33.250 # IP of bridge device brname=br0 # default network device used for routing to the outside internet netdev=$(ip route | awk '/^default/ {print $5}'|head -1) usage() { cat < Use NIC instead of default network device DESCRIPTION fai-mk-network creates $tapnum tap devices which are added to a software bridge. The tap devices will belong to the user specified. This bridge will be on a private subnet ($brip/24) unless -P is specified. Also a NATing is enabled for the private subnet. Using -P the bridge will use the network of $netdev (or -i) instead of a private subnet. Do not call this command in a network mounted directory when using -P. You can configure different settings by modifying some variables in the script itself. Using fai-kvm(1) you can start virtual machines which are connected to one of the tap devices. EOF exit 0 } mk_tap_devices() { for i in $(eval echo {1..$tapnum}); do [ -f /sys/class/net/tap$i/address ] && continue ip tuntap add dev tap$i mode tap user $user done } mk_bridge() { if [ -d /sys/class/net/$brname ]; then echo "Bridge $brname already exists. Aborting." exit 4 fi if [ $private -eq 0 ]; then dhcpcd -k $netdev ip addr flush $netdev # remove IP address of real nic ip link set $netdev down ip link set $netdev name r$netdev brname=$netdev # use name of NIC for bridge fi ip link add name $brname type bridge ip link set $brname up if [ $private -eq 0 ]; then ip link set r$netdev master $brname ip link set r$netdev up dhcpcd $netdev else ip addr add $brip/24 brd + dev $brname fi for i in $(eval echo {1..$tapnum}); do [ -f /sys/class/net/tap$i/address ] || continue ip link set tap$i master $brname # add device to the bridge ip link set tap$i up done } rm_bridge() { for i in $(eval echo {1..$tapnum}); do [ -f /sys/class/net/tap$i/address ] || continue ip link set tap$i nomaster ip link set tap$i down ip tuntap del dev tap$i mode tap done if [ $private -eq 0 ]; then brname=$netdev # use name of NIC for bridge dhcpcd -k $netdev ip link set r$netdev nomaster fi ip link set $brname down ip addr flush $brname ip link delete $brname type bridge if [ $private -eq 1 ]; then iptables -t nat -D POSTROUTING -o $netdev -j MASQUERADE sysctl -w net.ipv4.ip_forward=0 else ip link set r$netdev down ip link set r$netdev name $netdev ip link set $netdev up dhcpcd $netdev fi exit 0 } remove=0 private=1 # private network by default while getopts Phri: opt ; do case "$opt" in r) remove=1;; P) private=0 ;; h) usage ;; i) netdev=$OPTARG ;; esac done shift $((OPTIND - 1)) if [ $(id -u) != "0" ]; then echo "ERROR: You must run this program as root." echo usage fi if [ $remove -eq 1 ]; then rm_bridge fi if [ -z "$1" ]; then echo "ERROR: Please add a user name which will own the tap devices." echo "" usage fi user=$1 mk_tap_devices mk_bridge # enable forward IP and do NATing if [ $private -eq 1 ]; then sysctl -w net.ipv4.ip_forward=1 iptables -t nat -I POSTROUTING -o $netdev -j MASQUERADE fi # entry for /etc/network/interfaces: # auto br0 # iface br0 inet static # address 192.168.33.1 # netmask 255.255.255.0 # bridge_ports regex (tap).*