Logic gates =========== Logic gate circuits can perform operations like AND, OR etc. They can be implemented using PN junction diodes for demonstration purpose. A wide range of logic gate ICs are also available. Objective --------- Study of logic gates using SQ1 and PV1 as inputs, using TTL logic ICs 7408 and 7432. Procedure --------- .. image:: schematics/gate-or-diode.svg :width: 300px .. image:: schematics/gate-and-ic.svg :width: 300px - On a bread board, wire one of the circuits shown above. - Enable A1, A2 ands A3. Set input range on A1 and A2 to 16V - Set SQ1 to 500 Hz and WG to 1000 Hz - Select SQ2 from the WG wave shape - Shift the traces using the vertical sliders on the left, for better view. The results for the OR gate made using the diodes is shown below. .. image:: pics/gate-or-diode-screen.png :width: 400px The results for the AND gate made using the IC 7408 is shown below. .. image:: pics/gate-and-ic-screen.png :width: 400px Discussion ---------- The working of the logic gate will be evident from the 3 waveforms. You may shift traces vertically to separate them for clarity.