/* timers.c -- routines for handling the timer Copyright (C) 2008 Ajith Kumar, Inter-University Accelerator Centre, New Delhi. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include #ifndef BV #define BV(bit) (1 << (bit)) #endif #define CPU_CLOCK 8000000 // 8 MHz clock is assumed #define FLIMIT (CPU_CLOCK/2) static uint16_t f[] = {1,8,32,64,128,256,1024}; uint32_t set_frequency(uint32_t freq) { uint32_t tmp; uint8_t ocr, k; DDRD |= 0x80; // Make PD7 as output if(freq == 0) { TCCR2 = BV(WGM21) | BV(COM20); // CTC mode, clock disabled return 0; } else if(freq <= 15) { TCCR2 = BV(WGM21) | BV(COM20) | 7; // CTC mode, ck/1024 OCR2 = 255; return 15; } else if(freq >= FLIMIT) { TCCR2 = BV(WGM21) | BV(COM20) | 1; // CTC mode, ck/1 OCR2 = 0; return FLIMIT; } else { k = 0; while(k < 7) { tmp = FLIMIT / f[k]; // maximum value for the chosen prescaler if (tmp/freq <= 256) { TCCR2 = BV(WGM21) | BV(COM20) | (k+1); // CTC mode ocr = tmp/freq; tmp = tmp/ocr; // the value actually set if (ocr) --ocr; OCR2 = ocr; return tmp; } k = k + 1; } } return 0; } #define MTIME 50000 // We count the pulses for 50 milliseconds only uint32_t measure_frequency(void) { /* Count the input of TC0 for 50000 microseconds (using TC1). multiply by 20 to get the counts/second. */ uint32_t low = 0; TCCR1B = BV(CS11); // Feed Clock/8 (1 MHz ) to TCNT1 TCCR0 = 7; // TC0 counts External clock TIFR |= BV(TOV0); // Clear TCC0 OVF flag TCNT0 = 0; // Reset TCNT0 TCNT1 = 0; // to keep time with clk/8 while(TCNT1 < MTIME) { if(TIFR & BV(TOV0)) // TC0 overflow after 255 counts { ++low; TIFR |= BV(TOV0); // Clear OVF flag } } TCCR0 = 0; return (low * 256 + TCNT0)*20; } /* PWM DAC on counter 2, PD0 (OC2) */ void set_voltage(uint8_t val) { DDRD |= 0x80; // make PD0 as output OCR2 = val; // Fast PWM mode TCCR2 = BV(WGM21) | BV(WGM20) | BV(COM21) | BV(CS20); TCNT2 = 0; }