/* lcd.c -- routines for handling a text mode LCD display Copyright (C) 2008 Ajith Kumar, Inter-University Accelerator Centre, New Delhi and Pramode C.E, GnuVision.com. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. */ #include // LCD control bits of Port C on Phoenix MDK. Refer to the Schematic #define ENBIT 0x8 #define RWBIT 0x4 #define RSBIT 0x2 void delay(uint16_t k) { volatile uint16_t x = k; while(x) --x; } uint8_t cpos = 0; // LCD cursor position void lcd_command (uint8_t cmd) { PORTC &= 1; // Clear bits used by LCD PORTC |= (cmd & 0xF0); // Put 4 MSBs, RS, RW & EN Low PORTC |= ENBIT; PORTC &= ~ENBIT; // Pulse on EN pin PORTC &= 1; PORTC |= (cmd << 4); // Put 4 LSBs PORTC |= ENBIT; PORTC &= ~ENBIT; // Pulse on EN pin delay (10000); } void lcd_init (void) { delay(10000); DDRC |= 254; // Except PC0 all are outputs lcd_command (32 + 8 + 4); // 4 bit data mode lcd_command (4 + 2); // Entry mode lcd_command (8 + 4); // display ON, no cursor lcd_command (1); // Clear cpos = 0; // Set cursor position variable delay(10000); } void lcd_clear (void) { lcd_command(1); } void lcd_put_char (char c) { PORTC &= 1; // Clear bits used by LCD PORTC |= RSBIT | (c & 0xF0); // Put 4 MSBs, RS High, RW & EN Low PORTC |= ENBIT; PORTC &= ~ENBIT; // Pulse on EN pin PORTC &= 1; PORTC |= RSBIT | (c << 4); // Put 4 LSBs PORTC |= ENBIT; PORTC &= ~ENBIT; // Pulse on EN pin delay(1000); ++cpos; if(cpos == 8) lcd_command(128 + 32 + 8); // 1 x 16 display } void lcd_put_string(char *p) { while(*p) { lcd_put_char(*p); ++p; } } void lcd_put_byte(uint8_t i) { uint8_t pos100 = 0; if(i/100) { pos100 = 1; lcd_put_char('0' + i/100); i %= 100; } if( (i/10) || pos100) { lcd_put_char('0' + i/10); i %= 10; } lcd_put_char('0' + i); } void lcd_put_int(uint16_t val) { char ss[8]; uint8_t k; if(val ==0) { lcd_put_char('0'); return; } k = 0; while(val > 0) { ss[k++] = '0' + (val % 10); val /= 10; } while(k) { lcd_put_char(ss[k-1]); --k; } }