# Class implementing communication to the USB to the Serial Adapter # Require python-usb module installed import usb, array, time, sys VENDOR_ID = 0x03eb # Vendor ID of Atmel PRODUCT_ID = 0x21ff # Atmega based usb interface VDR = 0xC0 # USB Vendor device request RS_WRITE = 10 RS_READ = 14 RS_SETBAUD = 12 USBMAXTRY = 100 USBTIMEOUT = 0 PHOENIX_ERR = -1 MAXDATA = 802 # 800 + 2 buf = array.array('B',MAXDATA * [0]) # unsigned character array, Global class avrusb: def __init__(self): busses = usb.busses() self.fd = None # Device file handle for bus in busses: devices = bus.devices for dev in devices: # Search for AVRUSB if dev.idVendor == VENDOR_ID and dev.idProduct==PRODUCT_ID: self.dev = dev self.conf = self.dev.configurations[0] self.intf = self.conf.interfaces[0][0] self.fd = self.dev.open() self.fd.setConfiguration(self.conf) self.fd.claimInterface(self.intf) self.setbaud(38) # 38400 baud self.clearbuf() def setbaud(self, val): self.fd.controlMsg(VDR, RS_SETBAUD, 1, value = val, index = 0) def write(self, val): self.fd.controlMsg(VDR, RS_WRITE, 1, value = val) # time.sleep(.01) def read_one(self): # Read one byte, no wait res = self.fd.controlMsg(VDR, RS_READ, 1+2) if len(res) > 2: return res[2] def clearbuf(self): while 1: res = self.fd.controlMsg(VDR, RS_READ, 802) if len(res) < 3: break else: print ('Cleared ', res[0] + res[1]*256, 'bytes') def read(self, nb): # loop until getting 'nb' bytes index = 0 remaining = nb timer = 0 while remaining: if remaining <= 200: bsize = remaining else: bsize = 200 part = self.fd.controlMsg(VDR, RS_READ, bsize + 2) if len(part) < 3: timer = timer + 1 if timer > USBMAXTRY: return USBTIMEOUT continue; pl = len(part) - 2 for k in range(2,len(part)): buf[index] = part[k] index = index + 1 remaining = remaining - pl return index