Resonance of a driven pendulum ============================== The amplitude of an oscillating body becomes maximum when the frequency of the driving force is equal to its natural resonant frequency. A driven pendulum is a very simple example of such a system. Objective --------- Demonstrate the resonance of a driven pendulum. The pendulum is made by two button shaped magnets suspended on a piece of paper. A coil powered from SQ1 provides the driving force. Procedure --------- Make a pendulum using two button magnets and a piece of paper. Suspend it and place the 3000T coil near that, as shown in figure. .. image:: schematics/driven-pendulum.svg :width: 400px .. image:: pics/driven-pendulum-photo.jpg :width: 300px - Connect the coil between SQ1 and ground - Calculate the resonant frequency from the length of the pendulum - Adjust the frequency around the expected resonance frequency Discussion ---------- When SQ1 reaches the resonant frequency of the pendulum, the amplitude goes up due to resonance. A 4 cm (from the center of the magnet to the axis of oscillation) long pendulum resonated at around :math:`2,5~Hz`, almost tallying with its calculated natural frequency. The resonant frequency of the pendulum is given by :math:`f = 1/(2\pi\sqrt{g/l})`, where :math:`l` is the distance from the center of the magnet to the point of suspension and :math:`g` is the acceleration due to gravity. Repeat the experiment by changing the length of the pendulum.