/* * Copyright (c) 2010 Sandia Corporation. Under the terms of Contract * DE-AC04-94AL85000 with Sandia Corporation, the U.S. Governement * retains certain rights in this software. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * * Neither the name of Sandia Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /***************************************************************************** * * testwt - test write an ExodusII database file (testwt-nfaced.exo) * *****************************************************************************/ #include #include #include #include #include "exodusII.h" int main (int argc, char **argv) { int exoid, num_dim, num_nodes, num_elem, num_elem_blk; int num_elem_in_block[10], num_total_nodes_per_blk[10]; int num_face_in_block[10], num_total_faces_per_blk[10]; int num_face_in_sset[10], num_nodes_in_nset[10]; int num_node_sets, num_side_sets, error; int i, j, k, m, *elem_map, *connect; int node_list[100],elem_list[100],side_list[100]; int bids[10], ssids[10], nsids[10], nnpe[10]; int num_qa_rec, num_info; int num_glo_vars, num_nod_vars, num_ele_vars, num_sset_vars, num_nset_vars; int *truth_tab; int whole_time_step, num_time_steps; int CPU_word_size,IO_word_size; int prop_array[2]; float *glob_var_vals, *nodal_var_vals, *elem_var_vals; float *sset_var_vals, *nset_var_vals; float time_value; float x[100], y[100], z[100]; float dist_fact[100]; char *coord_names[3], *qa_record[2][4], *info[3], *var_names[3]; char *block_names[10], *nset_names[10], *sset_names[10]; char *prop_names[2], *attrib_names[2]; char *title = "This is a test"; ex_opts (EX_VERBOSE | EX_ABORT ); /* Specify compute and i/o word size */ CPU_word_size = 0; /* sizeof(float) */ IO_word_size = 4; /* (4 bytes) */ /* create EXODUS II file */ exoid = ex_create ("test-nfaced.exo", /* filename path */ EX_CLOBBER, /* create mode */ &CPU_word_size, /* CPU float word size in bytes */ &IO_word_size); /* I/O float word size in bytes */ printf ("after ex_create for test.exo, exoid = %d\n", exoid); printf (" cpu word size: %d io word size: %d\n",CPU_word_size,IO_word_size); /* ncopts = NC_VERBOSE; */ /* initialize file with parameters */ { ex_init_params par; num_dim = 3; num_nodes = 14; num_elem = 1; num_elem_blk = 1; num_node_sets = 0; strcpy( par.title, title ); par.num_dim = num_dim; par.num_nodes = num_nodes; par.num_edge = 0; par.num_edge_blk = 0; par.num_face = 5; par.num_face_blk = 1; par.num_elem = num_elem; par.num_elem_blk = num_elem_blk; par.num_node_sets = num_node_sets; par.num_edge_sets = 0; par.num_face_sets = 0; par.num_side_sets = 0; par.num_elem_sets = 0; par.num_node_maps = 0; par.num_edge_maps = 0; par.num_face_maps = 0; par.num_elem_maps = 0; error = ex_put_init_ext (exoid, &par); printf ("after ex_put_init_ext, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } } /* write nodal coordinates values and names to database */ x[ 0] = 0.00000e+00 ; y[ 0] = 0.00000e+00 ; z[ 0] = 0.00000e+00 ; x[ 1] = 2.00000e+00 ; y[ 1] = 0.00000e+00 ; z[ 1] = 0.00000e+00 ; x[ 2] = 0.00000e+00 ; y[ 2] = 2.00000e+00 ; z[ 2] = 0.00000e+00 ; x[ 3] = 2.00000e+00 ; y[ 3] = 2.00000e+00 ; z[ 3] = 0.00000e+00 ; x[ 4] = 0.00000e+00 ; y[ 4] = 0.00000e+00 ; z[ 4] = 2.00000e+00 ; x[ 5] = 2.00000e+00 ; y[ 5] = 0.00000e+00 ; z[ 5] = 2.00000e+00 ; x[ 6] = 0.00000e+00 ; y[ 6] = 2.00000e+00 ; z[ 6] = 2.00000e+00 ; x[ 7] = 2.00000e+00 ; y[ 7] = 2.00000e+00 ; z[ 7] = 2.00000e+00 ; x[ 8] = 0.00000e+00 ; y[ 8] = 3.50000e+00 ; z[ 8] = 1.00000e+00 ; x[ 9] = 2.00000e+00 ; y[ 9] = 3.50000e+00 ; z[ 9] = 1.00000e+00 ; x[10] = 0.00000e+00 ; y[10] = 3.00000e+00 ; z[10] = 1.50000e+00 ; x[11] = 2.00000e+00 ; y[11] = 3.00000e+00 ; z[11] = 1.50000e+00 ; x[12] = 0.00000e+00 ; y[12] = 3.00000e+00 ; z[12] = 0.50000e+00 ; x[13] = 2.00000e+00 ; y[13] = 3.00000e+00 ; z[13] = 0.50000e+00 ; error = ex_put_coord (exoid, x, y, z); printf ("after ex_put_coord, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } coord_names[0] = "x"; coord_names[1] = "y"; coord_names[2] = "z"; error = ex_put_coord_names (exoid, coord_names); printf ("after ex_put_coord_names, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* Write the face block parameters */ block_names[0] = "face_block_1"; num_face_in_block[0] = 15; num_total_nodes_per_blk[0] = 54; bids[0] = 10; error = ex_put_block (exoid, EX_FACE_BLOCK, bids[0], "nsided", num_face_in_block[0], num_total_nodes_per_blk[0], 0, 0, 0); printf ("after ex_put_block, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write face connectivity */ connect = (int *) calloc(num_total_nodes_per_blk[0], sizeof(int)); i = 0; j = 0; connect[i++] = 5; connect[i++] = 6; connect[i++] = 8; /* connectivity of face 1 of element 1 */ connect[i++] = 2; connect[i++] = 1; connect[i++] = 4; /* face 2 of element 1 */ connect[i++] = 6; connect[i++] = 2; connect[i++] = 4; connect[i++] = 8; /* face 3 of element 1 */ connect[i++] = 8; connect[i++] = 4; connect[i++] = 1; connect[i++] = 5; /* face 4 of element 1 */ connect[i++] = 1; connect[i++] = 2; connect[i++] = 6; connect[i++] = 5; /* face 5 of element 1 */ connect[i++] = 5; connect[i++] = 8; connect[i++] = 7; /* connectivity of face 1 of element 2 */ connect[i++] = 1; connect[i++] = 2; connect[i++] = 3; connect[i++] = 4; nnpe[j++] = 4; connect[i++] = 5; connect[i++] = 3; connect[i++] = 4; connect[i++] = 6; nnpe[j++] = 4; connect[i++] = 5; connect[i++] = 1; connect[i++] = 2; connect[i++] = 6; nnpe[j++] = 4; connect[i++] = 6; connect[i++] = 2; connect[i++] = 4; nnpe[j++] = 3; connect[i++] = 5; connect[i++] = 3; connect[i++] = 1; nnpe[j++] = 3; assert(i == num_total_nodes_per_blk[0]); assert(j == num_face_in_block[0]); error = ex_put_conn (exoid, EX_FACE_BLOCK, bids[0], connect, NULL, NULL); printf ("after ex_put_conn, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } free (connect); connect = NULL; error = ex_put_entity_count_per_polyhedra(exoid, EX_FACE_BLOCK, bids[0], nnpe); printf ("after ex_put_entity_count_per_polyhedra, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write element block parameters */ block_names[0] = "nfaced_1"; num_elem_in_block[0] = 1; num_total_nodes_per_blk[0] = 6; /* Do we need this; does it make sense... */ num_total_faces_per_blk[0] = 5; bids[0] = 10; error = ex_put_block (exoid, EX_ELEM_BLOCK, bids[0], "nfaced", num_elem_in_block[0], 0, 0, num_total_faces_per_blk[0], 0); printf ("after ex_put_block, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* Write face block names */ error = ex_put_names(exoid, EX_FACE_BLOCK, block_names); printf ("after ex_put_names, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* Write element block names */ error = ex_put_names(exoid, EX_ELEM_BLOCK, block_names); printf ("after ex_put_names, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write element-face connectivity */ connect = (int *) calloc(num_total_faces_per_blk[0], sizeof(int)); i = 0; j = 0; connect[i++] = 1; connect[i++] = 2; connect[i++] = 3; connect[i++] = 4; connect[i++] = 5; nnpe[j++] = 5; /* Number of faces per element */ assert(i == num_total_faces_per_blk[0]); assert(j == num_elem_in_block[0]); error = ex_put_conn (exoid, EX_ELEM_BLOCK, bids[0], NULL, NULL, connect); printf ("after ex_put_conn, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } free (connect); error = ex_put_entity_count_per_polyhedra(exoid, EX_ELEM_BLOCK, bids[0], nnpe); printf ("after ex_put_entity_count_per_polyhedra, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write QA records; test empty and just blank-filled records */ num_qa_rec = 2; qa_record[0][0] = "TESTWT-NFACED"; qa_record[0][1] = "testwt-nfaced"; qa_record[0][2] = "2010/02/15"; qa_record[0][3] = "06:35:15"; qa_record[1][0] = ""; qa_record[1][1] = " "; qa_record[1][2] = ""; qa_record[1][3] = " "; error = ex_put_qa (exoid, num_qa_rec, qa_record); printf ("after ex_put_qa, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write information records; test empty and just blank-filled records */ num_info = 3; info[0] = "This is the first information record."; info[1] = ""; info[2] = " "; error = ex_put_info (exoid, num_info, info); printf ("after ex_put_info, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write results variables parameters and names */ num_glo_vars = 1; var_names[0] = "glo_vars"; error = ex_put_var_param (exoid, "g", num_glo_vars); printf ("after ex_put_var_param, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } error = ex_put_var_names (exoid, "g", num_glo_vars, var_names); printf ("after ex_put_var_names, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } num_nod_vars = 2; /* 12345678901234567890123456789012 */ var_names[0] = "node_variable_a_very_long_name_0"; var_names[1] = "n"; error = ex_put_var_param (exoid, "n", num_nod_vars); printf ("after ex_put_var_param, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } error = ex_put_var_names (exoid, "n", num_nod_vars, var_names); printf ("after ex_put_var_names, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } num_ele_vars = 3; var_names[0] = "ele_var0"; var_names[1] = "ele_var1"; var_names[2] = "ele_var2"; error = ex_put_var_param (exoid, "e", num_ele_vars); printf ("after ex_put_var_param, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } error = ex_put_var_names (exoid, "e", num_ele_vars, var_names); printf ("after ex_put_var_names, error = %d\n", error); if (error) { ex_close (exoid); exit(-1); } /* write element variable truth table */ truth_tab = (int *) calloc ((num_elem_blk*num_ele_vars), sizeof(int)); k = 0; for (i=0; i