/* * SPDX-FileCopyrightText: 2016-2022 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: GPL-2.0-or-later */ /* SoC-level support. * * Provide a unified register-level interface. * * This is the same information provided in the register headers * of ESP8266 Non-OS SDK and ESP-IDF soc component, however * only values that are needed for the flasher stub are included here. * */ #pragma once #include #include #include #define READ_REG(REG) (*((volatile uint32_t *)(REG))) #define WRITE_REG(REG, VAL) *((volatile uint32_t *)(REG)) = (VAL) #define REG_SET_MASK(reg, mask) WRITE_REG((reg), (READ_REG(reg)|(mask))) #define REG_CLR_MASK(reg, mask) WRITE_REG((reg), (READ_REG(reg)&(~(mask)))) #define REG_SET_FIELD(_r, _f, _v) (WRITE_REG((_r),((READ_REG(_r) & ~((_f) << (_f##_S)))|(((_v) & (_f))<<(_f##_S))))) #define ESP32_OR_LATER !(ESP8266) #define ESP32S2_OR_LATER !(ESP8266 || ESP32) #define ESP32S3_OR_LATER !(ESP8266 || ESP32 || ESP32S2) /********************************************************** * Per-SOC capabilities */ #ifdef ESP32S2 #define WITH_USB_OTG 1 #endif // ESP32S2 #ifdef ESP32C3 #define WITH_USB_JTAG_SERIAL 1 #define IS_RISCV 1 #endif // ESP32C3 #ifdef ESP32S3 #define WITH_USB_JTAG_SERIAL 1 #define WITH_USB_OTG 1 #endif // ESP32S3 #ifdef ESP32C6 #define WITH_USB_JTAG_SERIAL 1 #define IS_RISCV 1 #endif // ESP32C6 #ifdef ESP32H2 #define WITH_USB_JTAG_SERIAL 1 #define IS_RISCV 1 #endif // ESP32H2 #ifdef ESP32P4 // TODO: Add support for USB modes when MP is available // #define WITH_USB_JTAG_SERIAL 1 // #define WITH_USB_OTG 1 #define IS_RISCV 1 #endif // ESP32P4 // Increase CPU freq to speed up read/write operations over USB // Disabled on the S3 due to stability issues, would require dbias adjustment. // https://github.com/espressif/esptool/issues/832, https://github.com/espressif/esptool/issues/808 #define USE_MAX_CPU_FREQ ((WITH_USB_JTAG_SERIAL || WITH_USB_OTG) && !ESP32S3) // Later chips don't support ets_efuse_get_spiconfig. #define SUPPORT_CONFIG_SPI (ESP32 || ESP32S2 || ESP32S3 || ESP32S3BETA2 || ESP32C3 || ESP32H2BETA1 || ESP32H2BETA2 || ESP32C6BETA) /********************************************************** * Per-SOC based peripheral register base addresses * Sync with reg_base.h in ESP-IDF */ #ifdef ESP8266 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60000200 /* SPI peripheral 0 */ #endif #ifdef ESP32 #define UART_BASE_REG 0x3ff40000 /* UART0 */ #define SPI_BASE_REG 0x3ff42000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x3ff43000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x3ff44000 /* GPIO */ #define DR_REG_IO_MUX_BASE 0x3ff49000 #endif #ifdef ESP32S2 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x3f402000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x3f403000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x3f404000 #define USB_BASE_REG 0x60080000 #define RTCCNTL_BASE_REG 0x3f408000 #define SYSTEM_BASE_REG 0x3F4C0000 #define DR_REG_IO_MUX_BASE 0x3f409000 #endif #ifdef ESP32S3 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 /* GPIO */ #define USB_BASE_REG 0x60080000 #define RTCCNTL_BASE_REG 0x60008000 /* RTC Control */ #define USB_DEVICE_BASE_REG 0x60038000 #define SYSTEM_BASE_REG 0x600C0000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32S3BETA2 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 /* GPIO */ #define USB_BASE_REG 0x60080000 #define RTCCNTL_BASE_REG 0x60008000 /* RTC Control */ #define USB_DEVICE_BASE_REG 0x60038000 #define SYSTEM_BASE_REG 0x600C0000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32C3 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 #define RTCCNTL_BASE_REG 0x60008000 /* RTC Control */ #define USB_DEVICE_BASE_REG 0x60043000 #define SYSTEM_BASE_REG 0x600C0000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32C6BETA #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32H2BETA1 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 #define RTCCNTL_BASE_REG 0x60008000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32H2BETA2 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32C2 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60002000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60003000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60004000 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32C6 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60003000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60002000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60091000 #define USB_DEVICE_BASE_REG 0x6000F000 #define DR_REG_PCR_BASE 0x60096000 #define DR_REG_LP_WDT_BASE 0x600B1C00 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32H2 #define UART_BASE_REG 0x60000000 /* UART0 */ #define SPI_BASE_REG 0x60003000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x60002000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x60091000 #define USB_DEVICE_BASE_REG 0x6000F000 #define DR_REG_PCR_BASE 0x60096000 #define DR_REG_LP_WDT_BASE 0x600B1C00 #define DR_REG_IO_MUX_BASE 0x60009000 #endif #ifdef ESP32P4 #define UART_BASE_REG 0x500CA000 /* UART0 */ #define SPI_BASE_REG 0x5008D000 /* SPI peripheral 1, used for SPI flash */ #define SPI0_BASE_REG 0x5008C000 /* SPI peripheral 0, inner state machine */ #define GPIO_BASE_REG 0x500E0000 #define DR_REG_IO_MUX_BASE 0x500E1000 #endif /********************************************************** * UART peripheral * * The features we use are basically the same on all chips * * Only UART0 is used */ #define UART_CLKDIV_REG(X) (UART_BASE_REG + 0x14) #define UART_CLKDIV_M (0x000FFFFF) #if ESP32_OR_LATER #define UART_CLKDIV_FRAG_S 20 #define UART_CLKDIV_FRAG_V 0xF #endif #define UART_FIFO(X) (UART_BASE_REG + 0x00) #define UART_INT_ST(X) (UART_BASE_REG + 0x08) #define UART_INT_ENA(X) (UART_BASE_REG + 0x0C) #define UART_INT_CLR(X) (UART_BASE_REG + 0x10) #define UART_STATUS(X) (UART_BASE_REG + 0x1C) #if ESP32S2_OR_LATER && !ESP32C6 && !ESP32H2 #define UART_RXFIFO_CNT_M 0x3FF #else #define UART_RXFIFO_CNT_M 0xFF #endif #define UART_RXFIFO_FULL_INT_ENA (1<<0) #define UART_RXFIFO_TOUT_INT_ENA (1<<8) #define ETS_UART0_INUM 5 /********************************************************** * SPI peripheral * * The features we use are mostly the same on all chips * except for W0 base address & option for 2-byte status command * * Only one SPI peripheral is used (0 on ESP8266, 1 on ESP32). * On ESP32S2 && ESP32S3 this is called SPI_MEM_xxx index 1 */ #define SPI_CMD_REG (SPI_BASE_REG + 0x00) #define SPI_FLASH_WREN (1<<30) #define SPI_FLASH_RDSR (1<<27) #define SPI_FLASH_SE (1<<24) #define SPI_FLASH_BE (1<<23) #define SPI_ADDR_REG (SPI_BASE_REG + 0x04) #define SPI_CTRL_REG (SPI_BASE_REG + 0x08) #if ESP32_OR_LATER #define SPI_WRSR_2B (1<<22) #endif #if ESP32S2_OR_LATER #define SPI_RD_STATUS_REG (SPI_BASE_REG + 0x2C) #else #define SPI_RD_STATUS_REG (SPI_BASE_REG + 0x10) #endif #ifdef ESP8266 #define SPI_W0_REG (SPI_BASE_REG + 0x40) #endif #ifdef ESP32 #define SPI_W0_REG (SPI_BASE_REG + 0x80) #endif #if ESP32S2_OR_LATER #define SPI_W0_REG (SPI_BASE_REG + 0x58) #endif #if ESP32S2_OR_LATER #define SPI_EXT2_REG (SPI_BASE_REG + 0x54) /* renamed SPI_MEM_FSM_REG */ #else #define SPI_EXT2_REG (SPI_BASE_REG + 0xF8) #endif #define SPI_ST 0x7 /* done state value */ #ifdef ESP32 /* On ESP32 & newer the SPI peripherals are layered * flash, this lets us check the state of the internal * state machine under the SPI flash controller */ #define SPI0_EXT2_REG (SPI0_BASE_REG + 0xF8) #endif #if ESP32S2_OR_LATER #define SPI0_EXT2_REG (SPI0_BASE_REG + 0x54) #endif /********************************************************** * GPIO peripheral * * We only need to read the strapping register on ESP32 or later */ #define GPIO_STRAP_REG (GPIO_BASE_REG + 0x38) /********************************************************** * USB peripheral */ #ifdef ESP32S2 #define UART_USB_OTG 2 #define ETS_USB_INTR_SOURCE 48 #define ETS_USB_INUM 9 /* arbitrary level 1 level interrupt */ #endif // ESP32S2 #ifdef ESP32C3 #define UART_USB_JTAG_SERIAL 3 #define DR_REG_INTERRUPT_CORE0_BASE 0x600c2000 #define INTERRUPT_CORE0_USB_INTR_MAP_REG (DR_REG_INTERRUPT_CORE0_BASE + 0x068) /* USB-JTAG-Serial */ #define ETS_USB_INUM 17 /* arbitrary level 1 level interrupt */ #endif // ESP32C3 #ifdef ESP32S3 #define UART_USB_OTG 3 #define UART_USB_JTAG_SERIAL 4 #define DR_REG_INTERRUPT_CORE0_BASE 0x600c2000 #define INTERRUPT_CORE0_USB_INTR_MAP_REG (DR_REG_INTERRUPT_CORE0_BASE + 0x098) /* DWC-OTG */ #define INTERRUPT_CORE0_USB_DEVICE_INT_MAP_REG (DR_REG_INTERRUPT_CORE0_BASE + 0x180) /* USB-JTAG-Serial */ #define ETS_USB_INUM 17 /* arbitrary level 1 level interrupt */ #endif // ESP32S3 #ifdef ESP32C6 #define UART_USB_JTAG_SERIAL 3 #define DR_REG_INTERRUPT_MATRIX_BASE 0x60010000 #define INTERRUPT_CORE0_USB_INTR_MAP_REG (DR_REG_INTERRUPT_MATRIX_BASE + 0xC0) /* USB-JTAG-Serial, INTMTX_CORE0_USB_INTR_MAP_REG */ #define ETS_USB_INUM 17 /* arbitrary level 1 level interrupt */ #endif // ESP32C6 #ifdef ESP32H2 #define UART_USB_JTAG_SERIAL 3 #define DR_REG_INTERRUPT_MATRIX_BASE 0x60010000 #define INTERRUPT_CORE0_USB_INTR_MAP_REG (DR_REG_INTERRUPT_MATRIX_BASE + 0x94) /* USB-JTAG-Serial, INTMTX_CORE0_USB_INTR_MAP_REG */ #define ETS_USB_INUM 17 /* arbitrary level 1 level interrupt */ #endif // ESP32H2 #ifdef WITH_USB_JTAG_SERIAL #define USB_DEVICE_INT_ENA_REG (USB_DEVICE_BASE_REG + 0x010) #define USB_DEVICE_INT_CLR_REG (USB_DEVICE_BASE_REG + 0x014) #define USB_DEVICE_EP1_CONF_REG (USB_DEVICE_BASE_REG + 0x004) #define USB_DEVICE_EP1_REG (USB_DEVICE_BASE_REG + 0x000) #define USB_DEVICE_SERIAL_OUT_RECV_PKT_INT_CLR (1<<2) #define USB_DEVICE_SERIAL_OUT_EP_DATA_AVAIL (1<<2) #define USB_DEVICE_SERIAL_OUT_RECV_PKT_INT_ENA (1<<2) #endif // WITH_USB_JTAG_SERIAL #define USB_GAHBCFG_REG (USB_BASE_REG + 0x8) #define USB_GLBLLNTRMSK (1 << 0) /********************************************************** * RTC_CNTL peripheral */ #ifdef ESP32S2 #define RTC_CNTL_OPTION1_REG (RTCCNTL_BASE_REG + 0x0128) #endif #ifdef ESP32S3 #define RTC_CNTL_OPTION1_REG (RTCCNTL_BASE_REG + 0x012C) #define RTC_CNTL_WDTCONFIG0_REG (RTCCNTL_BASE_REG + 0x0098) // RTC_CNTL_RTC_WDTCONFIG0_REG #define RTC_CNTL_WDTWPROTECT_REG (RTCCNTL_BASE_REG + 0x00B0) // RTC_CNTL_RTC_WDTWPROTECT_REG #define RTC_CNTL_SWD_CONF_REG (RTCCNTL_BASE_REG + 0x00B4) #define RTC_CNTL_SWD_WPROTECT_REG (RTCCNTL_BASE_REG + 0x00B8) #define RTC_CNTL_SWD_WKEY 0x8F1D312A #define RTC_CNTL_SWD_AUTO_FEED_EN (1 << 31) #endif #ifdef ESP32C3 #define RTC_CNTL_WDTCONFIG0_REG (RTCCNTL_BASE_REG + 0x0090) #define RTC_CNTL_WDTWPROTECT_REG (RTCCNTL_BASE_REG + 0x00A8) #define RTC_CNTL_SWD_CONF_REG (RTCCNTL_BASE_REG + 0x00AC) #define RTC_CNTL_SWD_WPROTECT_REG (RTCCNTL_BASE_REG + 0x00B0) #define RTC_CNTL_SWD_WKEY 0x8F1D312A #define RTC_CNTL_SWD_AUTO_FEED_EN (1 << 31) #endif #ifdef ESP32C6 #define RTC_CNTL_WDTCONFIG0_REG (DR_REG_LP_WDT_BASE + 0x0) // LP_WDT_RWDT_CONFIG0_REG #define RTC_CNTL_WDTWPROTECT_REG (DR_REG_LP_WDT_BASE + 0x0018) // LP_WDT_RWDT_WPROTECT_REG #define RTC_CNTL_SWD_CONF_REG (DR_REG_LP_WDT_BASE + 0x001C) // LP_WDT_SWD_CONFIG_REG #define RTC_CNTL_SWD_WPROTECT_REG (DR_REG_LP_WDT_BASE + 0x0020) // LP_WDT_SWD_WPROTECT_REG #define RTC_CNTL_SWD_WKEY 0x50D83AA1 #define RTC_CNTL_SWD_AUTO_FEED_EN (1 << 18) #endif #ifdef ESP32H2 #define RTC_CNTL_WDTCONFIG0_REG (DR_REG_LP_WDT_BASE + 0x0) // LP_WDT_RWDT_CONFIG0_REG #define RTC_CNTL_WDTWPROTECT_REG (DR_REG_LP_WDT_BASE + 0x001C) // LP_WDT_RWDT_WPROTECT_REG #define RTC_CNTL_SWD_CONF_REG (DR_REG_LP_WDT_BASE + 0x0020) // LP_WDT_SWD_CONFIG_REG #define RTC_CNTL_SWD_WPROTECT_REG (DR_REG_LP_WDT_BASE + 0x0024) // LP_WDT_SWD_WPROTECT_REG #define RTC_CNTL_SWD_WKEY 0x50D83AA1 #define RTC_CNTL_SWD_AUTO_FEED_EN (1 << 18) #endif #define RTC_CNTL_WDT_WKEY 0x50D83AA1 #define RTC_CNTL_FORCE_DOWNLOAD_BOOT (1 << 0) /********************************************************** * SYSTEM registers */ #ifdef ESP32C3 #define SYSTEM_CPU_PER_CONF_REG (SYSTEM_BASE_REG + 0x008) #define SYSTEM_CPUPERIOD_SEL_M ((SYSTEM_CPUPERIOD_SEL_V)<<(SYSTEM_CPUPERIOD_SEL_S)) #define SYSTEM_CPUPERIOD_SEL_V 0x3 #define SYSTEM_CPUPERIOD_SEL_S 0 #define SYSTEM_CPUPERIOD_MAX 1 // CPU_CLK frequency is 160 MHz #define SYSTEM_SYSCLK_CONF_REG (SYSTEM_BASE_REG + 0x058) #define SYSTEM_SOC_CLK_SEL_M ((SYSTEM_SOC_CLK_SEL_V)<<(SYSTEM_SOC_CLK_SEL_S)) #define SYSTEM_SOC_CLK_SEL_V 0x3 #define SYSTEM_SOC_CLK_SEL_S 10 #define SYSTEM_SOC_CLK_MAX 1 #endif // ESP32C3 #ifdef ESP32S2 #define SYSTEM_CPU_PER_CONF_REG (SYSTEM_BASE_REG + 0x018) #define SYSTEM_CPUPERIOD_SEL_M ((SYSTEM_CPUPERIOD_SEL_V)<<(SYSTEM_CPUPERIOD_SEL_S)) #define SYSTEM_CPUPERIOD_SEL_V 0x3 #define SYSTEM_CPUPERIOD_SEL_S 0 #define SYSTEM_CPUPERIOD_MAX 2 // CPU_CLK frequency is 240 MHz #define SYSTEM_SYSCLK_CONF_REG (SYSTEM_BASE_REG + 0x08C) #define SYSTEM_SOC_CLK_SEL_M ((SYSTEM_SOC_CLK_SEL_V)<<(SYSTEM_SOC_CLK_SEL_S)) #define SYSTEM_SOC_CLK_SEL_V 0x3 #define SYSTEM_SOC_CLK_SEL_S 10 #define SYSTEM_SOC_CLK_MAX 1 #endif // ESP32S2 #ifdef ESP32C6 #define PCR_SYSCLK_CONF_REG (DR_REG_PCR_BASE + 0x110) #define PCR_SOC_CLK_SEL_M ((PCR_SOC_CLK_SEL_V)<<(PCR_SOC_CLK_SEL_S)) #define PCR_SOC_CLK_SEL_V 0x3 #define PCR_SOC_CLK_SEL_S 16 #define PCR_SOC_CLK_MAX 1 // CPU_CLK frequency is 160 MHz (source is PLL_CLK) #endif // ESP32C6 #ifdef ESP32H2 #define PCR_SYSCLK_CONF_REG (DR_REG_PCR_BASE + 0x10c) #define PCR_SOC_CLK_SEL_M ((PCR_SOC_CLK_SEL_V)<<(PCR_SOC_CLK_SEL_S)) #define PCR_SOC_CLK_SEL_V 0x3 #define PCR_SOC_CLK_SEL_S 16 #define PCR_SOC_CLK_MAX 1 // CPU_CLK frequency is 160 MHz (source is PLL_CLK) #endif // ESP32H2 /********************************************************** * Per-SOC security info buffer size */ #ifdef ESP32S2 #define SECURITY_INFO_BYTES 12 /* doesn't include chip_id and api_version */ #endif // ESP32S2 #if ESP32S3_OR_LATER #define SECURITY_INFO_BYTES 20 #endif // ESP32S3_OR_LATER /********************************************************** * Per-SOC address of the rom_spiflash_legacy_funcs symbol in ROM * Can be retrieved with gdb: "info address rom_spiflash_legacy_funcs" */ #if ESP32 || ESP32S2 || ESP32S3 || ESP32S3BETA2 #define ROM_SPIFLASH_LEGACY 0x3ffae270 #endif // ESP32 || ESP32S2 || ESP32S3 || ESP32S3BETA2 #if ESP32C3 || ESP32C6BETA || ESP32C2 || ESP32C6 #define ROM_SPIFLASH_LEGACY 0x3fcdfff4 #endif // ESP32C3 || ESP32C6BETA || ESP32C2 || ESP32C6 #if ESP32H2BETA1 || ESP32H2BETA2 #define ROM_SPIFLASH_LEGACY 0x3fcdfff0 #endif // ESP32H2BETA1 || ESP32H2BETA2 #if ESP32H2 #define ROM_SPIFLASH_LEGACY 0x4084fff0 #endif // ESP32H2 #if ESP32P4 #define ROM_SPIFLASH_LEGACY 0x4ff3ffec #endif // ESP32P4 /********************************************************** * IO-MUX peripheral */ #define MCU_SEL 0x7 #define MCU_SEL_S 12 #define PIN_FUNC_SELECT(PIN_NAME, FUNC) REG_SET_FIELD(PIN_NAME, MCU_SEL, FUNC) #if ESP32 // PERIPHS_IO_MUX_SD_... #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x60) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x68) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x64) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x5c) #define FUNC_GPIO 2 #endif // ESP32 #if ESP32S2 #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x7c) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x80) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x84) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x78) #define FUNC_GPIO 1 #endif // ESP32S2 #if ESP32C3 #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x40) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x48) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x44) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x3c) #define FUNC_GPIO 1 #endif // ESP32C3 #if ESP32S3 || ESP32S3BETA2 #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x7c) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x80) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x84) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x78) #define FUNC_GPIO 1 #endif // ESP32S3 || ESP32S3BETA2 #if ESP32C2 #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x40) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x48) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x44) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x3c) #define FUNC_GPIO 1 #endif // ESP32C2 #if ESP32C6 || ESP32C6BETA #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x78) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x68) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x7c) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x64) #define FUNC_GPIO 1 #endif // ESP32C6 || ESP32C6BETA #if ESP32H2 || ESP32H2BETA1 || ESP32H2BETA2 #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x50) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x44) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x54) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x40) #define FUNC_GPIO 1 #endif // ESP32H2 || ESP32H2BETA1 || ESP32H2BETA2 #if ESP32P4 #define PERIPHS_IO_MUX_SPICLK_U (DR_REG_IO_MUX_BASE + 0x7c) #define PERIPHS_IO_MUX_SPIQ_U (DR_REG_IO_MUX_BASE + 0x80) #define PERIPHS_IO_MUX_SPID_U (DR_REG_IO_MUX_BASE + 0x84) #define PERIPHS_IO_MUX_SPICS0_U (DR_REG_IO_MUX_BASE + 0x78) #define FUNC_GPIO 1 #endif // ESP32P4