#!/bin/sh # @(#)install.sh 19.1 (ESO-IPG) 02/25/03 14:31:59 # # Installation script for MIDAS from CD-ROM with binaries. # #set -x ########################################################################### # # Initialize all the read-only variables used by this script. Mark # them readonly so they don't get accidentally modified # ########################################################################### # Determine how to set prompt if [ "`echo -n a`" = a ]; then # BSD echo NNN=-n CCC= else # USG echo NNN= CCC='\c' fi readonly NNN CCC # Most of this needs to updated for each new CD. MIDAS_SOURCES="95novpl2.0.tar.z" MIDVERS="95NOV" DATE='February 1996' COPYDATE="1996" RELEASE="95NOVpl2.0" RETURN_MSG="RETURN TO MAIN MENU" readonly MIDAS_SOURCES MIDVERS DATE COPYDATE RETURN_MSG RELEASE STATE_CD=1 STATE_ARCH=2 STATE_MIDASHOME=3 STATE_PROD_SELECT=4 STATE_INSTALL=5 STATE_SETUP=6 STATE_QUIT=Q readonly STATE_CD STATE_ARCH STATE_MIDASHOME STATE_PROD_SELECT readonly STATE_INSTALL STATE_QUIT STATE_SETUP PROD_BIN="MIDAS binary" PROD_SRC="MIDAS sources" PROD_GUI="MIDAS statically-linked GUIs" PROD_DEMO="MIDAS demo data" PROD_CALIB="MIDAS calibration data" readonly PROD_BIN PROD_SRC PROD_GUI PROD_DEMO PROD_CALIB ARCH_ALPHA="Alpha OSF" ARCH_HP700="HP9000 Series 700/800" ARCH_IBM="IBM RS6000 AIX" ARCH_SGI5="SGI IRIX 5" ARCH_SUNOS="SPARC Sunos 4.1.x" ARCH_SOLARIS="SPARC Solaris 5.x" ARCH_LINUX="PC LINUX 1.2.13" REL_ALPHA="OSF1" REL_HP700="HP-UX" REL_IBM="AIX" REL_SGI5="IRIX" REL_SUNOS="SunOS_4.1.3" REL_SOLARIS4="SunOS_5.4" REL_SOLARIS5="SunOS_5.5" REL_LINUX="Linux" readonly ARCH_ALPHA ARCH_HP700 ARCH_IBM readonly ARCH_SGI5 ARCH_SUNOS ARCH_SOLARIS ARCH_LINUX readonly REL_ALPHA REL_HP700 REL_IBM readonly REL_SGI5 REL_SUNOS REL_SOLARIS4 REL_SOLARIS5 REL_LINUX ARCH_LIST="$ARCH_ALPHA,$ARCH_HP700,$ARCH_IBM" ARCH_LIST="$ARCH_LIST,$ARCH_SGI5,$ARCH_SUNOS,$ARCH_SOLARIS,$ARCH_LINUX" readonly ARCH_LIST # Script sets these up during run (all begin with _) MIDAS_CDDIR= MIDAS_ARCH= MIDAS_PROD_LIST= MIDAS_PROD_SELECTED= MIDAS_PROD_INSTALLED= MIDAS_STATE= MIDAS_SETUP= MIDAS_BINDIR_DONE= MIDAS_LIBDIR_DONE= MIDAS_MANDIR_DONE= MIDAS_ARCH_PREFIX= MIDAS_MANDIR=/usr/man/manl MIDAS_BINDIR=/usr/bin MIDAS_LIBDIR=/usr/lib MIDAS_SHID=3.1 ####################################################################### # # Generic support routines # ####################################################################### aborted() { # Catch user-generated interrupts, and quit echo "" echo "**** INSTALLATION ABORTED BY USER ****" echo "" exit 1 } trap aborted 1 2 3 killed() { # Catch attempts to kill this process echo "" echo "**** INSTALLATION ABORTED ABNORMALLY ****" echo "" exit 1 } trap killed 15 error() { # standard error message echo '***' $* > /dev/tty false } fatal_error() { # Print error message and die; this should never happen error $* kill -15 $$ } change_ifs() { # # Change IFS to $1, saving previous value in $OFS. # NOTE: this is not a stack!! Do not nest calls!! if [ "$IFS" != "$1" ]; then OIFS="$IFS" IFS="$1" fi } restore_ifs() { # Restore the old value of IFS IFS="$OIFS" } array() { # # mimic the behavior of arrays; pick the $2'th element out of $1 # uses 1-indexing # vector="$1" rindex="$2" index=1 change_ifs "," for elt in $vector; do if [ "$index" -eq "$rindex" ]; then echo "$elt" restore_ifs return fi index=`expr $index + 1` done restore_ifs fatal_error "Array selection failed for $vector[$rindex]" } necho() { # # A safe way to perform echo without sending a new-line # echo $NNN "$*" $CCC > /dev/tty } ask_return() { # Simply get the user to hit the return key necho 'Hit to continue ...' read x } ask_yn() { # # Get a yes/no answer from the user; $1 is the prompt, $2 the default # prompt="$1" def="${2:-y}" # yes is the default if not supplied while true; do necho "$prompt [$def]: " read answer answer="${answer:-$def}" case "$answer" in [yY]) answer=y break ;; [nN]) answer=n break ;; *) error Please enter "'y'" or "'n'". ;; esac done [ $answer = y ] } ask_response() { # # Get a (non-zero) response from the user # $1 is the question, $2 is the default (if any). # question="$1" default="$2" while true; do if [ -z "$default" ]; then necho "$question: " else necho "$question [$default]: " fi read answer if [ -z "$answer" ]; then answer=$default fi if [ -z "$answer" ]; then error Please enter a non-empty string. else break fi done echo $answer } difference() { # # Calculate and return the list of all elements in $1, but not # in $2. This calculates set difference the hard way. # l1="$1" l2="$2" l3= change_ifs "," for i in $l1; do if in_list "$l2" "$i"; then echo > /dev/null # do nothing else l3=`addto "$l3" "$i"` fi done restore_ifs echo "$l3" } addto() { # # Add element $2 to list $1; return the result # ll="$1" el="$2" change_ifs "," if in_list "$ll" "$el"; then echo > /dev/null # do nothing else if [ -z "$ll" ]; then ll="$el" else ll="$ll,$el" fi fi restore_ifs echo "$ll" } genlist() { # generate a list of numbers from $1..$2 echo $1 $2 | awk '{ for (i=$1; i<=$2; i++) list=list "," i print substr(list,2) }' } count() { # count the number of entries in $1 echo $1 | awk -F, '{ print NF }' } in_list() { # # Determine whether $2 is in the list $1; $1 is a comma-separated # list of valid values # found=f list="$1" arg="$2" change_ifs "," for i in $list do if [ "$i" = "$arg" ]; then found=t break fi done restore_ifs [ $found = t ] } ask_list() { # # Ask the user for a value in list $2; the prompt is $1, and # the default value is $3 # prompt="$1" default="$3" list="$2" while true; do num=`ask_response "$prompt" "$default"` if in_list "$list" $num; then break else error "$num is not one of the choices." fi done echo $num } ask_multi() { # # Allow a multiple selection, by number. $1 is the prompt # to use, $2 is the list of valid inputs # prompt="$1" list="$2" while true; do pselect=`ask_response "$prompt"` err=f change_ifs "," for num in $pselect; do if in_list "$list" $num; then true else error "$num is not a valid choice" err=t break fi done restore_ifs if [ "$err" != "t" ]; then break fi done echo $pselect } valid_dir() { # Determine if $1 is a valid directory specification # This means it must begin with a '/' if [ "`expr "$1" : '\(/\).*'`" != "/" ]; then error "Directory name must begin with a '/'" fi return $? } exists_dir() { # Determine whether directory $1 exists. It must also # be a valid directory (see above). dname=$1 if [ -d "$dname" ]; then valid_dir $dname else error "Directory \"$dname\" does not exist" fi return $? } ####################################################################### # # Pre- and Post- installation banners # ####################################################################### banner() { # Banner before the script begins. Put trademarks, disclaimers, # etc. in here. clear > /dev/tty echo " " > /dev/tty echo " ********************************************************************" > /dev/tty echo " $RELEASE release of ESO-MIDAS " > /dev/tty echo " Copyright (C) $COPYDATE European Southern Observatory" > /dev/tty echo " This program is free software; you can redistribute it and/or modify" > /dev/tty echo " it under the terms of the GNU General Public License as published by" > /dev/tty echo " the Free Software Foundation; either version 2 of the License, or " > /dev/tty echo " (at your option) any later version. " > /dev/tty echo " " > /dev/tty echo " This program is distributed in the hope that it will be useful, but " > /dev/tty echo " WITHOUT ANY WARRANTY; without even the implied warranty of " > /dev/tty echo " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU " > /dev/tty echo " General Public License for more details. " > /dev/tty echo " " > /dev/tty echo " You should have received a copy of the GNU General Public License " > /dev/tty echo " along with this program; if not, write to the Free Software " > /dev/tty echo " Foundation, Inc., 675 Massachusetss Ave, Cambridge, MA 02139, USA. " > /dev/tty echo " Corresponding concerning ESO-MIDAS should be addressed as follows: " > /dev/tty echo " Internet e-mail: midas@eso.org " > /dev/tty echo " Postal address: European Southern Observatory " > /dev/tty echo " Data Management Division " > /dev/tty echo " Karl-Schwarzschild-Strasse 2 " > /dev/tty echo " D-85748 Garching bei Muenchen. GERMANY " > /dev/tty echo " ********************************************************************" > /dev/tty } banner1() { # Banner before completing MIDAS installation clear > /dev/tty # echo "" > /dev/tty echo " Complete the ESO-MIDAS installation means:" > /dev/tty echo "" > /dev/tty echo " 1. Create a soft link from /midas to $MIDASHOME" >/dev/tty echo " 2. Copy the inmidas, gomidas and helpmidas scripts from" > /dev/tty echo " $MIDASHOME/$MIDVERS/system/unix to e.g.: /usr/bin" > /dev/tty echo " 3. Copy inmidas.l, gomidas.l and helpmidas.l man-pages from" > /dev/tty echo " $MIDASHOME/$MIDVERS/system/unix/manl to e.g. /usr/man/manl" >/dev/tty echo " 4. Create the system references to MIDAS shared libraries located in" >/dev/tty echo " $MIDASHOME/$MIDVERS/lib" >/dev/tty echo "" > /dev/tty echo " If you can not become superuser to run these tasks you can, as a normal" > /dev/tty echo " user, run MIDAS by setting the following environment variables and" > /dev/tty echo " executing the inmidas, gomidas and helpmidas scripts located in" > /dev/tty echo " $MIDASHOME/$MIDVERS/system/unix" > /dev/tty echo "" >/dev/tty echo " % setenv MIDASHOME $MIDASHOME" >/dev/tty case "$MIDAS_ARCH" in $ARCH_HP700) echo " % setenv SHLIB_PATH $MIDASHOME/$MIDVERS/lib" >/dev/tty ;; *) echo " % setenv LD_LIBRARY_PATH $MIDASHOME/$MIDVERS/lib" >/dev/tty ;; esac echo " % $MIDASHOME/$MIDVERS/system/unix/inmidas" > /dev/tty echo "" >/dev/tty } post_install() { # Should do something here?? echo " " > /dev/tty echo " " > /dev/tty } ####################################################################### # # State Querying Functions # - isset_* : only returns status # - check_* : calls isset_* and print message # - precond_ : checks if preconditions are met # - check_precond_ : checks preconditions, prints message # ####################################################################### isset_su() { if user=`sh -c whoami 2>/dev/null` ; then : elif user=`sh -c /usr/bin/whoami 2>/dev/null` ; then : elif user=`sh -c /usr/ucb/whoami 2>/dev/null` ; then : else user="$USER" fi [ "$user" = "root" ] } isset_cddir() { [ -n "$MIDAS_CDDIR" ] } isset_arch() { [ -n "$MIDAS_ARCH" ] } isset_midashome() { [ -n "$MIDASHOME" -a -d "$MIDASHOME" ] } isset_product() { [ -n "$MIDAS_PROD_SELECTED" ] } isset_prod_installed() { [ -n "$MIDAS_PROD_INSTALLED" ] } isset_setup() { [ -f "$MIDASHOME/$MIDVERS/monit/prepa.exe" ] } isset_setup_installed() { [ -n "$MIDAS_SETUP" ] } # # Check functions # check_cddir() { isset_cddir || ( error "Please enter the CD mount point first (item $STATE_CD)."; ask_return; false ) } check_arch() { isset_arch || ( error "Please select an architecture first (item $STATE_ARCH)."; ask_return; false ) } check_setup() { isset_setup || ( error "MIDAS binary must be installed first (item $STATE_PROD_SELECT and/or item $STATE_INSTALL)."; ask_return; false ) } check_midashome() { isset_midashome || ( error "Please select the installation directory MIDASHOME first (item $STATE_MIDASHOME)."; ask_return; false ) } check_product() { isset_product || ( error "Please select the ESO-MIDAS product(s) to install first (item $STATE_PROD_SELECT)."; ask_return; false ) } check_prod_installed() { isset_prod_installed || ( error "Please install the ESO-MIDAS products first (item $STATE_INSTALL)."; ask_return; false ) } # # Precondition functions # precond_product() { isset_arch && isset_midashome } precond_install() { isset_cddir && isset_arch && isset_midashome && isset_product } precond_setup() { isset_midashome && isset_product && isset_arch && isset_prod_installed } precond_run_password() { isset_midashome && isset_password } # # Check Precondition functions # check_precond_run_password() { check_cddir && check_midashome } check_precond_product() { check_arch && check_midashome } check_precond_install() { check_cddir && check_arch && check_midashome && check_product } check_precond_setup() { check_midashome && check_arch && check_setup } ###################################################################### # # State setting and querying functions # ###################################################################### set_state() { # # Sanity check the state; find the lowest state whose preconditions # are met, and which has not been completed. Break after two passes. pass=1 while true; do case "$MIDAS_STATE" in $STATE_CD) if isset_cddir; then MIDAS_STATE=`expr $MIDAS_STATE + 1` continue else break fi ;; $STATE_ARCH) if isset_arch; then MIDAS_STATE=`expr $MIDAS_STATE + 1` continue else break fi ;; $STATE_MIDASHOME) if isset_midashome; then MIDAS_STATE=`expr $MIDAS_STATE + 1` continue else break fi ;; $STATE_PROD_SELECT) if precond_product; then if isset_product || isset_prod_installed; then MIDAS_STATE=`expr $MIDAS_STATE + 1` continue fi break fi ;; $STATE_INSTALL) if precond_install; then break elif isset_prod_installed; then MIDAS_STATE=`expr $MIDAS_STATE + 1` continue fi ;; $STATE_SETUP) if precond_setup; then break fi ;; $STATE_QUIT) break ;; esac if [ "$pass" -gt 1 ]; then break fi pass=`expr $pass + 1` MIDAS_STATE=1 done } show_state() { # Display the current state. Prints just about everything the user # needs to know about the installation process. if isset_cddir || isset_arch || isset_midashome; then # one of these must be set for anything to be displayed echo > /dev/null else return fi echo '***************************************************************************' > /dev/tty echo " ESO-MIDAS Release MIDVERS: $MIDVERS" > /dev/tty if isset_cddir; then echo " CD mount directory: $MIDAS_CDDIR" > /dev/tty fi if isset_arch; then echo " Target Architecture: $MIDAS_ARCH" > /dev/tty fi if isset_midashome; then echo " Installation Directory MIDASHOME: $MIDASHOME" > /dev/tty fi if isset_product; then echo " Products selected for installation: " > /dev/tty ctr=1 change_ifs "," for i in $MIDAS_PROD_SELECTED; do echo " ${ctr}. ${i}. " > /dev/tty ctr=`expr $ctr + 1` done restore_ifs fi if isset_prod_installed; then echo " Products installed: " > /dev/tty ctr=1 change_ifs "," for i in $MIDAS_PROD_INSTALLED; do echo " ${ctr}. ${i}. " > /dev/tty ctr=`expr $ctr + 1` done restore_ifs fi echo '***************************************************************************' > /dev/tty } ####################################################################### # # Main Action Routines # ####################################################################### build_prodlist() { # # Build a list of products supported on chosen architecture # MIDAS_PROD_LIST="$PROD_SRC" case "$MIDAS_ARCH" in $ARCH_SUNOS|$ARCH_LINUX) if [ -n "$MIDAS_PROD_LIST" ]; then MIDAS_PROD_LIST="$MIDAS_PROD_LIST,$PROD_BIN,$PROD_GUI,$PROD_DEMO,$PROD_CALIB" else MIDAS_PROD_LIST="$PROD_BIN,$PROD_GUI,$PROD_DEMO,$PROD_CALIB" fi ;; $ARCH_HP700|$ARCH_SOLARIS|$ARCH_ALPHA|$ARCH_SGI5|$ARCH_IBM) if [ -n "$MIDAS_PROD_LIST" ]; then MIDAS_PROD_LIST="$MIDAS_PROD_LIST,$PROD_BIN,$PROD_DEMO,$PROD_CALIB" else MIDAS_PROD_LIST="$PROD_BIN,$PROD_DEMO,$PROD_CALIB" fi ;; *) fatal_error "Unknown architecture $MIDAS_ARCH" ;; esac } pick_cddir() { # # Allow the user to specify the directory on which the CD # is mounted. Usually this is /cdrom. # clear > /dev/tty echo " " > /dev/tty echo " This installation program must know where the MIDAS " > /dev/tty echo " CD has been mounted. The usual mount point is /cdrom." > /dev/tty echo " " > /dev/tty echo " Type in 'R' at the prompt below if you want to return" > /dev/tty echo " to the main menu. " > /dev/tty echo " " > /dev/tty while true; do cd_def=${MIDAS_CDDIR:-/cdrom} dir=`ask_response 'Enter the CD mount point' $cd_def` if [ "$dir" = "r" -o "$dir" = "R" ]; then break elif exists_dir "$dir"; then ifile=`ls $dir|grep -i install.sh` if [ -z "$ifile" ]; then error "This directory does not contain any MIDAS products." else MIDAS_CDDIR=$dir break fi fi done isset_cddir } pick_arch() { # # Select an architecture/toolkit combination # clear > /dev/tty echo " " > /dev/tty echo "Please select one of the following," > /dev/tty echo "or type 'R' to return to the main menu." > /dev/tty echo " " > /dev/tty echo "Architecture" | awk '{ printf(" %-25s\n", $1) }' > /dev/tty echo "============" | awk '{ printf(" %-25s\n", $1) }' > /dev/tty ctr=1 change_ifs "," for i in $ARCH_LIST; do arch="$i" echo "${ctr}.:${arch}" ctr=`expr $ctr + 1` done | awk -F: '{ printf(" %3s %-25s\n", $1, $2) }' > /dev/tty echo " R. $RETURN_MSG." > /dev/tty echo " " > /dev/tty restore_ifs # For some reason, ctr=1 after the above for loop; # The pipe seems to cause this ctr=`count "$ARCH_LIST"` alist=`genlist 1 $ctr` alist="$alist,r,R" aselect=`ask_list 'Enter your selection' "$alist"` case "$aselect" in [rR]) ;; *) MIDAS_ARCH=`array "$ARCH_LIST" "$aselect"` MIDAS_PROD_SELECTED="" MIDAS_PROD_INSTALLED="" case "$MIDAS_ARCH" in $ARCH_ALPHA) MIDAS_ARCH_PREFIX=alphaosf;; $ARCH_HP700) MIDAS_ARCH_PREFIX=hp700;; $ARCH_IBM) MIDAS_ARCH_PREFIX=rs6000;; $ARCH_SGI5) MIDAS_ARCH_PREFIX=sgirix5;; $ARCH_SUNOS) MIDAS_ARCH_PREFIX=sparcsun;; $ARCH_SOLARIS) MIDAS_ARCH_PREFIX=sparcsol;; $ARCH_LINUX) MIDAS_ARCH_PREFIX=pclinux;; esac ;; esac isset_arch } pick_midashome() { # # Pick the MIDASHOME directory; this is inherited from the environment, # if already set. # clear > /dev/tty echo " " > /dev/tty echo " All ESO-MIDAS products for the same architecture " > /dev/tty echo " are installed in the same directory. The location of " > /dev/tty echo " this directory is stored in the environment variable " > /dev/tty echo " MIDASHOME. You will need to designate the location of " > /dev/tty echo " this directory, and possibly create it before you can " > /dev/tty echo " install any ESO-MIDAS products. " > /dev/tty echo " " > /dev/tty echo " Type in 'R' at the prompt below if you want to return " > /dev/tty echo " to the main menu. " > /dev/tty while true; do echo " " > /dev/tty echo 'Enter the name of the directory in which to install ESO-MIDAS products.' > /dev/tty dir=`ask_response 'MIDASHOME' $MIDASHOME` if [ "$dir" = "r" -o "$dir" = "R" ]; then break else if valid_dir "$dir"; then if [ ! -d "$dir" ]; then echo "Directory $dir does not exist. " > /dev/tty if ask_yn "OK to create new directory $dir"; then mkdir $dir if [ $? -ne 0 ]; then error "Unable to create directory $dir." continue fi else continue fi fi if ask_yn "OK to install in directory $dir"; then MIDASHOME=$dir export MIDASHOME break fi fi fi done isset_midashome } pick_mandir() { echo " " > /dev/tty echo "Enter the name of the directory in which to install ESO-MIDAS man-pages," > /dev/tty echo "or type in 'R' at the prompt below if you want to skip " > /dev/tty echo " " > /dev/tty while true; do dir=`ask_response 'MIDAS_MANDIR' $MIDAS_MANDIR` if [ "$dir" = "r" -o "$dir" = "R" ]; then break else if valid_dir "$dir"; then if [ ! -d "$dir" ]; then echo "Directory $dir does not exist. " > /dev/tty continue fi if ask_yn "OK to copy ESO-MIDAS man-pages in directory $dir"; then man_suffix=`expr "$dir" : '.*man\(.\)'` for manpage in inmidas gomidas helpmidas readline do cp $MIDASHOME/$MIDVERS/system/unix/manl/$manpage.l $dir/$manpage.$man_suffix echo "cp $MIDASHOME/$MIDVERS/system/unix/manl/$manpage.l $dir/$manpage.$man_suffix" >/dev/tty done MIDAS_MANDIR_DONE="yes" break fi fi fi done } pick_bindir() { echo " " > /dev/tty echo "Enter the name of the directory in which to install ESO-MIDAS scripts," > /dev/tty echo "or type in 'R' at the prompt below if you want to skip " > /dev/tty echo " " > /dev/tty while true; do dir=`ask_response 'MIDAS_BINDIR' $MIDAS_BINDIR` if [ "$dir" = "r" -o "$dir" = "R" ]; then break else if valid_dir "$dir"; then if [ ! -d "$dir" ]; then echo "Directory $dir does not exist. " > /dev/tty continue fi if ask_yn "OK to copy ESO-MIDAS scripts in directory $dir"; then MIDASHOME_0=`echo MIDASHOME0=$MIDASHOME | sed 's/\//\\\\\//g'` MIDVERS_0=`echo MIDVERS0=$MIDVERS` for script in inmidas gomidas helpmidas do cp $MIDASHOME/$MIDVERS/system/unix/$script $dir echo "cp $MIDASHOME/$MIDVERS/system/unix/$script $dir" >/dev/tty done for file in $dir/inmidas $dir/helpmidas do echo "Editing $file ..." cat $file | sed \ -e 's/^MIDASHOME0=.*/'$MIDASHOME_0'/' \ -e 's/^MIDVERS0=.*/'$MIDVERS_0'/' \ > $file.t chmod +xr $file.t mv -f $file.t $file done MIDAS_BINDIR_DONE="yes" break fi fi fi done } pick_libdir() { echo " " > /dev/tty echo "Enter the name of the directory in which to install ESO-MIDAS libraries," > /dev/tty echo "or type in 'R' at the prompt below if you want to skip " > /dev/tty echo " " > /dev/tty while true; do dir=`ask_response 'MIDAS_LIBDIR' $MIDAS_LIBDIR` if [ "$dir" = "r" -o "$dir" = "R" ]; then break else if valid_dir "$dir"; then if [ ! -d "$dir" ]; then echo "Directory $dir does not exist. " > /dev/tty continue fi if ask_yn "OK to link ESO-MIDAS libraries in directory $dir"; then for library in libmidas libgmidas do case "$MIDAS_ARCH" in $ARCH_ALPHA|$ARCH_SOLARIS) rm -f $dir/$library.so ln -s $MIDASHOME/$MIDVERS/lib/$library.so $dir/$library.so echo "ln -s $MIDASHOME/$MIDVERS/$library.so $dir/$library.so" >/dev/tty ;; $ARCH_SUNOS) rm -f $dir/$library.so.$MIDAS_SHID ln -s $MIDASHOME/$MIDVERS/lib/$library.so.$MIDAS_SHID $dir/$library.so.$MIDAS_SHID echo "ln -s $MIDASHOME/$MIDVERS/lib/$library.so.$MIDAS_SHID $dir/$library.so.$MIDAS_SHID" >/dev/tty /usr/etc/ldconfig ;; *) error "No ESO-MIDAS shared libraries expected for $MIDAS_ARCH" return ;; esac done MIDAS_LIBDIR_DONE="yes" break fi fi fi done } pick_product() { # # Pick the list of products to install, based on the architecture # if check_precond_product; then clear > /dev/tty build_prodlist echo " " > /dev/tty echo "Please select any of the following products." > /dev/tty echo "If you want to install more than one product," > /dev/tty echo "enter them in a comma-separated list." > /dev/tty echo " " > /dev/tty ctr=1 plist= change_ifs "," for i in $MIDAS_PROD_LIST; do echo " ${ctr}. ${i}. " > /dev/tty plist=`addto "$plist" "$ctr"` ctr=`expr $ctr + 1` done restore_ifs echo " A. Install ALL products." > /dev/tty echo " R. $RETURN_MSG." > /dev/tty plist="$plist,a,A,r,R" echo " " > /dev/tty pselect=`ask_multi 'Enter your list' "$plist"` case "$pselect" in [rR]) false; return ;; [aA]) # Put all entries in pselect j=1 pselect= while [ $j -lt $ctr ]; do pselect=`addto "$pselect" "$j"` j=`expr $j + 1` done ;; esac # # go back through $MIDAS_PROD_LIST and create MIDAS_PROD_SELECTED # the list of selected products # change_ifs "," MIDAS_PROD_SELECTED= for j in $pselect; do ctr=1 for i in $MIDAS_PROD_LIST; do if [ "$ctr" -eq "$j" ]; then case "$i" in $PROD_BIN) [ -f $MIDASHOME/$MIDVERS/monit/prepa.exe ];; $PROD_SRC) [ -f $MIDASHOME/$MIDVERS/monit/prepa.c ];; $PROD_GUI) [ -f $MIDASHOME/$MIDVERS/gui/exec/help.exe ];; $PROD_DEMO) [ -f $MIDASHOME/demo ];; $PROD_CALIB) [ -f $MIDASHOME/calib ];; esac if [ $? -eq 0 ]; then echo " " > /dev/tty echo "*** Directory $MIDASHOME seems to have" > /dev/tty echo "*** product $i already installed." > /dev/tty echo " " > /dev/tty if ask_yn 'Do you want to overwrite this copy' n; then MIDAS_PROD_SELECTED=`addto "$MIDAS_PROD_SELECTED" "$i"` fi else MIDAS_PROD_SELECTED=`addto "$MIDAS_PROD_SELECTED" "$i"` fi break fi ctr=`expr $ctr + 1` done done restore_ifs fi isset_product } setup_product() { # # setup. Install links for shared libraries. # scripts and man pages. # if check_precond_setup; then clear > /dev/tty banner1 if isset_su ; then if ask_yn 'OK to complete MIDAS installation'; then pick_mandir pick_bindir case "$MIDAS_ARCH" in $ARCH_ALPHA|$ARCH_SUNOS|$ARCH_SOLARIS) pick_libdir ;; $ARCH_LINUX) echo $MIDASHOME/$MIDVERS/lib | cat /etc/ld.so.conf - | sort -u > /etc/ld_so_conf mv /etc/ld.so.conf /etc/ld.so.conf~ mv /etc/ld_so_conf /etc/ld.so.conf /sbin/ldconfig MIDAS_LIBDIR_DONE="yes" ;; $ARCH_HP700|$ARCH_SGI5) if [ "$MIDASHOME" != "/midas" ]; then mv /midas /midas.org rm -f midas.org 2>/dev/null ln -s $MIDASHOME /midas fi MIDAS_LIBDIR_DONE="yes" ;; esac if [ -n "$MIDAS_LIBDIR_DONE" -a -n "$MIDAS_BINDIR_DONE" ]; then echo " " >/dev/tty echo "ESO-MIDAS installation completed successfully." >/dev/tty echo "Exit and type \"inmidas\" to start ESO-MIDAS" >/dev/tty echo " " >/dev/tty MIDAS_SETUP="OK" fi ask_return fi else echo "Sorry. You need to be superuser to run this option" >/dev/tty ask_return fi fi isset_setup_installed } install_product() { # # Install the chosen products. # if check_precond_install; then clear > /dev/tty show_state if ask_yn 'OK to install this configuration'; then save_dir=`pwd` cd $MIDASHOME change_ifs "," MIDAS_PROD_INSTALLED= echo " " > /dev/tty for prod in $MIDAS_PROD_SELECTED; do case "$prod" in $PROD_BIN) suffix=bin;; $PROD_SRC) suffix=src;; $PROD_GUI) suffix=gui;; $PROD_DEMO) suffix=demo;; $PROD_CALIB) suffix=calib;; esac if [ "$suffix" != "src" ]; then ifile=`ls $MIDAS_CDDIR|grep -i ${MIDAS_ARCH_PREFIX}.$suffix` else ifile=$MIDAS_SOURCES fi if [ -z "$ifile" ]; then error "Can't find product file ${MIDAS_ARCH_PREFIX}.$suffix for $prod" sleep 1 else necho "Installing $prod ..." > /dev/tty COMMAND="zcat < $MIDAS_CDDIR/$ifile | tar xf -" if sh -c "$COMMAND" ; then MIDAS_PROD_INSTALLED=`addto "$MIDAS_PROD_INSTALLED" "$prod"` fi echo " " > /dev/tty fi done echo " " > /dev/tty restore_ifs cd $save_dir MIDAS_PROD_SELECTED=`difference "$MIDAS_PROD_SELECTED" "$MIDAS_PROD_INSTALLED"` fi fi isset_prod_installed } quit() { ask_yn 'Are you sure you want to quit' y } infer_cddir() { ifile=`ls |grep -i install.sh` if [ -n "$ifile" ]; then MIDAS_CDDIR=`pwd` else ifile=`ls /cdrom |grep -i install.sh` if [ -n "$ifile" ]; then MIDAS_CDDIR="/cdrom" fi fi } get_arch() { case $1 in $REL_ALPHA) MIDAS_ARCH=$ARCH_ALPHA ; MIDAS_ARCH_PREFIX=alphaosf;; $REL_HP700) MIDAS_ARCH=$ARCH_HP700 ; MIDAS_ARCH_PREFIX=hp700;; $REL_IBM) MIDAS_ARCH=$ARCH_IBM ; MIDAS_ARCH_PREFIX=rs6000;; $REL_SGI5) MIDAS_ARCH=$ARCH_SGI5 ; MIDAS_ARCH_PREFIX=sgirix5;; $REL_SUNOS) MIDAS_ARCH=$ARCH_SUNOS ; MIDAS_ARCH_PREFIX=sparcsun;; $REL_SOLARIS4) MIDAS_ARCH=$ARCH_SOLARIS ; MIDAS_ARCH_PREFIX=sparcsol;; $REL_SOLARIS5) MIDAS_ARCH=$ARCH_SOLARIS ; MIDAS_ARCH_PREFIX=sparcsol;; $REL_LINUX) MIDAS_ARCH=$ARCH_LINUX ; MIDAS_ARCH_PREFIX=pclinux;; esac } infer_arch() { MIDAS_PROD_SELECTED="" MIDAS_PROD_INSTALLED="" UNAME=`(uname) | sed 's/\//-/g' 2>/dev/null` URELS=`(uname -r) 2>/dev/null` get_arch "${UNAME}_$URELS" if [ -z "$MIDAS_ARCH" ] ;then get_arch "$UNAME" fi } select_action() { # The main routine. It just keeps prompting the user to perform # one of the listed actions. The loop is broken when the user # affirms the quit. MIDAS_STATE=1 while true; do clear > /dev/tty set_state show_state pre1=" " pre2=" " pre3=" " pre4=" " pre5=" " pre6=" " pre7=" " preQ=" " echo " " > /dev/tty echo " Choose one of the following actions: " > /dev/tty case "$MIDAS_STATE" in 1) pre1=">";; 2) pre2=">";; 3) pre3=">";; 4) pre4=">";; 5) pre5=">";; 6) pre6=">";; 7) pre7=">";; Q) preQ=">";; esac echo " " > /dev/tty echo "${pre1}1. Enter the CD mount point. " > /dev/tty echo "${pre2}2. Select architecture. " > /dev/tty echo "${pre3}3. Enter the installation directory (MIDASHOME). " > /dev/tty echo "${pre4}4. Select ESO-MIDAS product(s) to install. " > /dev/tty echo "${pre5}5. Install ESO-MIDAS product(s). " > /dev/tty echo "${pre6}6. Complete ESO-MIDAS installation in your system. " > /dev/tty echo "${preQ}Q. Quit. " > /dev/tty echo " " > /dev/tty select=`ask_list 'Enter your selection' "1,2,3,4,5,6,q,Q" $MIDAS_STATE` case "$select" in 1) if pick_cddir; then MIDAS_STATE=`expr $select + 1`; fi;; 2) if pick_arch; then MIDAS_STATE=`expr $select + 1`; fi;; 3) if pick_midashome; then MIDAS_STATE=`expr $select + 1`; fi;; 4) if pick_product; then MIDAS_STATE=`expr $select + 1`; fi;; 5) if install_product; then MIDAS_STATE=`expr $select + 1`; fi;; 6) if setup_product; then MIDAS_STATE="$STATE_QUIT"; fi;; [qQ]) if quit; then break; fi;; *) fatal_error "Improper selection $select in select_action";; esac done } ############################################################################## # # Main Processing here # ############################################################################## banner ask_return infer_cddir infer_arch select_action post_install exit 0