# SOME DESCRIPTIVE TITLE # Copyright (C) YEAR Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2021-09-24 15:36+0900\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. type: Title == #, no-wrap msgid "LINSTOR Volumes in Proxmox VE" msgstr "Proxmox VE での LINSTOR ボリューム" #. type: Plain text msgid "" "indexterm:[Proxmox]This chapter describes DRBD in Proxmox VE via the http://" "git.linbit.com/linstor-proxmox.git[LINSTOR Proxmox Plugin]." msgstr "" "indexterm:[Proxmox]この章は https://github.com/LINBIT/linstor-proxmox." "git[LINSTOR Proxmox Plugin] にあるProxmox VEでのDRBDについて説明します。" #. type: Title === #, no-wrap msgid "Proxmox VE Overview" msgstr "Proxmox VE概要" #. type: Plain text msgid "" "http://www.proxmox.com/en/[Proxmox VE] is an easy to use, complete server " "virtualization environment with KVM, Linux Containers and HA." msgstr "" "http://www.proxmox.com/en/[Proxmox VE] はKVM、Linuxコンテナ、HAとともに使われ" "る簡単で、完全なサーバ仮想化環境を提供します。" #. (LVM volumes on DRBD) #. type: Plain text msgid "" "'linstor-proxmox' is a Perl plugin for Proxmox that, in combination with " "LINSTOR, allows to replicate VM disks on several Proxmox VE nodes. This " "allows to live-migrate active VMs within a few seconds and with no downtime " "without needing a central SAN, as the data is already replicated to multiple " "nodes." msgstr "" "'linstor-proxmox'がProxmox用のPerlプラグインで、Proxmox VEの複数のノードでVM" "ディスクの複製にLINSTORとともに使われます。これにより実行中のVMのライブマイグ" "レーションが無停止でかつ中央にSANディスクを用意せずに数秒で完了します。これは" "データがすでに複数のノードに複製をされているからです。" #. type: Title === #, no-wrap msgid "Upgrades" msgstr "アップグレード" #. type: Plain text msgid "" "If this is a fresh installation, skip this section and continue with <>." msgstr "" "新規インストールの場合はこのセクションをスキップして <> に進んでください。" #. type: Title ==== #, no-wrap msgid "From 4.x to 5.x" msgstr "4.x から 5.x へ" #. type: Plain text msgid "" "Version 5 of the plugin drops compatibility with the legacy configuration " "options \"storagepool\" and \"redundancy\". Version 5 *requires* a " "\"resourcegroup\" option, and obviously a LINSTOR resource group. The old " "options should be removed from the config." msgstr "" "プラグインのバージョン 5 では、構成オプション \"storagepool\" と \"redundancy" "\" はサポートされません。バージョン 5 では LINSTOR リソースグループである " "\"resourcegroup\" オプションが必須になります。古いオプションは構成から削除す" "る必要があります。" #. type: Plain text msgid "" "Configuring LINSTOR is described in Section <>, a typical example follows: Let's assume the pool was set to " "\"mypool\", and redundancy to 3." msgstr "" "LINSTOR の構成に関しては <> を参照してくださ" "い。以下に典型的は例を示します。プールが \"mypool\" 、冗長性が 3 に設定される" "例です。" #. type: delimited block - #, no-wrap msgid "" "# linstor resource-group create --storage-pool=mypool --place-count=3 drbdMypoolThree\n" "# linstor volume-group create drbdMypoolThree\n" "# vi /etc/pve/storage.cfg\n" "drbd: drbdstorage\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup drbdMypoolThree\n" msgstr "" "# linstor resource-group create --storage-pool=mypool --place-count=3 drbdMypoolThree\n" "# linstor volume-group create drbdMypoolThree\n" "# vi /etc/pve/storage.cfg\n" "drbd: drbdstorage\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup drbdMypoolThree\n" #. type: Title ==== #, no-wrap msgid "From 5.x to 6.x" msgstr "5.x から 6.x へ" #. type: Plain text msgid "" "With version 6 PVE added additional parameters to some functions and " "rightfully reset their \"APIAGE\". This means that old plugins, while " "actually usable as they don't use any of these changed functions do not work " "anymore. Please upgrade to plugin version 5.2.1 at least." msgstr "" "バージョン 6 で PVE は、一部の関数にパラメーターを追加し、それらの \"APIAGE" "\" をリセットしました。古いプラグインは、これらの変更された関数を使用しないた" "め実際には機能しますが、使用できなくなります。少なくともプラグインバージョン " "5.2.1 にアップグレードしてください。" #. type: Title === #, no-wrap msgid "Proxmox Plugin Installation" msgstr "Proxmoxプラグインのインストール" #. type: Plain text msgid "" "LINBIT provides a dedicated public repository for Proxmox VE users. This " "repository not only contains the Proxmox plugin, but the whole DRBD SDS " "stack including a DRBD SDS kernel module and user space utilities." msgstr "" "LINBITはProxmox VEユーザのために専用のレポジトリを公開しています。ここには" "ProxmoxプラグインだけでなくDRBD SDSカーネルモジュールやユーザスペースユーティ" "リティを含むすべてのDRBD SDSスタックが含まれます。" #. type: Plain text #, no-wrap msgid "" "The DRBD9 kernel module is installed as a `dkms` package (i.e., `drbd-dkms`), therefore you'll have to install\n" "`pve-headers` package, before you set up/install the software packages from LINBIT's repositories. Following\n" "that order, ensures that the kernel module will build properly for your kernel. If you don't plan to install\n" "the latest Proxmox kernel, you have to install kernel headers matching your current running kernel (e.g.,\n" "\t\t`pve-headers-$(uname -r)`). If you missed this step, then still you can rebuild the dkms package against\n" "your current kernel, (kernel headers have to be installed in advance), by issuing `apt install --reinstall\n" "drbd-dkms` command.\n" msgstr "DRBD9のカーネルモジュールは `dkms` パッケージとして( `drbd-dkms` )インストールされるので、LINBITのレポジトリからインストールする前に `pve-headers` パッケージをインストールします。これに従うことでカーネルモジュールがこの環境用に構築されることが保証されます。最新のProxmoxカーネルでない場合は、現在のカーネルのバージョンに合う( `pve-headers-$(uname -r)` )カーネルヘッダーをインストールする必要があります。あるいは、現在のカーネルに対してdkmsパッケージを再構築する(ヘッダーをインストールする必要あります)必要がある場合は、`apt install --reinstall drbd-dkms` を実行します。\n" #. type: Plain text msgid "" "LINBIT's repository can be enabled as follows, where \"$PVERS\" should be " "set to your Proxmox VE *major version* (e.g., \"7\", not \"7.1\"):" msgstr "" "LINBITのレポジトリは以下の操作で有効にできます。\"$PVERS\" はProxmox VEのメ" "ジャーバージョンを指定します(例、\"7\" であり \"7.1\" ではない)。" #. type: delimited block - #, no-wrap msgid "" "# wget -O- https://packages.linbit.com/package-signing-pubkey.asc | apt-key add -\n" "# PVERS=7 && echo \"deb http://packages.linbit.com/proxmox/ proxmox-$PVERS drbd-9\" > \\\n" "\t/etc/apt/sources.list.d/linbit.list\n" "# apt update && apt install linstor-proxmox\n" msgstr "" "# wget -O- https://packages.linbit.com/package-signing-pubkey.asc | apt-key add -\n" "# PVERS=7 && echo \"deb http://packages.linbit.com/proxmox/ proxmox-$PVERS drbd-9\" > \\\n" "\t/etc/apt/sources.list.d/linbit.list\n" "# apt update && apt install linstor-proxmox\n" #. type: Title === #, no-wrap msgid "LINSTOR Configuration" msgstr "LINSTORの設定" #. type: Plain text msgid "" "For the rest of this guide we assume that you have a LINSTOR cluster " "configured as described in <>. Start the \"linstor-" "controller\" on one node, and the \"linstor-satellite\" on all nodes. The " "preferred way to use the plugin, starting from version 4.1.0, is via LINSTOR " "resource groups and a single volume group within every resource group. " "LINSTOR resource groups are described in <>. All " "the required LINSTOR configuration (e.g., redundancy count) has to be set on " "the resource group." msgstr "" "このガイドの残りの部分では <> に基づいて LINSTOR クラ" "スタが構成されていると仮定します。1 つのノードで \"linstor-controller\" を起" "動し、すべてのノードで \"linstor-satellite\" を起動します。また、バージョン " "4.1.0 以降、このプラグインを使用する上で推奨する方法は、LINSTOR リソースグ" "ループと単一のボリュームグループを使用することです。 LINSTOR リソースグループ" "については <> を参照してください。必要なすべての " "LINSTOR 構成(冗長カウントなど)をリソースグループに設定する必要があります。" #. type: Title === #, no-wrap msgid "Proxmox Plugin Configuration" msgstr "Proxmoxプライグインの設定" #. type: Plain text msgid "" "The final step is to provide a configuration for Proxmox itself. This can be " "done by adding an entry in the `/etc/pve/storage.cfg` file, with a content " "similar to the following." msgstr "" "最後の手順ではProxmox自身を設定します。これは `/etc/pve/storage.cfg` に以下の" "ような設定を加えることで行います。" #. type: delimited block - #, no-wrap msgid "" "drbd: drbdstorage\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup defaultpool\n" msgstr "" "drbd: drbdstorage\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup defaultpool\n" #. type: Plain text msgid "" "The \"drbd\" entry is fixed and you are not allowed to modify it, as it " "tells to Proxmox to use DRBD as storage backend. The \"drbdstorage\" entry " "can be modified and is used as a friendly name that will be shown in the PVE " "web GUI to locate the DRBD storage. The \"content\" entry is also fixed, so " "do not change it. The redundancy (specified in the resource group) specifies " "how many replicas of the data will be stored in the cluster. The " "recommendation is to set it to 2 or 3 depending on your setup. The data is " "accessible from all nodes, even if some of them do not have local copies of " "the data. For example, in a 5 node cluster, all nodes will be able to " "access 3 copies of the data, no matter where they are stored in. The " "\"controller\" parameter must be set to the IP of the node that runs the " "LINSTOR controller service. Only one node can be set to run as LINSTOR " "controller at the same time. If that node fails, start the LINSTOR " "controller on another node and change that value to its IP address." msgstr "" "\"drbd\" は固定で変更できません。これによりProxmoxにストレージとしてDRBDを使" "用することを宣言します。 \"drbdstorage\" は変更可能で、Web GUI上で表示される" "DRBDストレージの場所を示する名前です。\"content\" は固定で変更できません。 " "\"redundancy\" (リソースグループで設定される) はクラスタ内に保つ複製数を指定" "します。推奨値は 2 または 3 です。例えば5ノードをもつクラスタの場合、すべの" "ノードがデータの3つの複製にアクセスできます。\"controller\" はLINSTORコント" "ローラが動作するノードのIPアドレスを指定します。同時に1つのノードだけが" "LINSTORコントローラとして設定できます。このノードは現在動作していなければなら" "ず、すでに動作していない場合は、他のノードでLINSTORコントローラを動作させ、IP" "アドレスを変更しなければなりません。" #. type: Plain text msgid "" "A configuration using different storage pools in different resource groups " "would look like this:" msgstr "" "異なるリソースグループで異なるストレージプールを使用する構成は、次のようにな" "ります。" #. type: delimited block - #, no-wrap msgid "" "drbd: fastdrbd\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup ssd\n" msgstr "" "drbd: fastdrbd\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup ssd\n" #. type: delimited block - #, no-wrap msgid "" "drbd: slowdrbd\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup backup\n" msgstr "" "drbd: slowdrbd\n" " content images,rootdir\n" " controller 10.11.12.13\n" " resourcegroup backup\n" #. type: Plain text msgid "" "By now, you should be able to create VMs via Proxmox's web GUI by selecting " "\"__drbdstorage__\", or any other of the defined pools as storage location." msgstr "" "これらの設定後、Web GUIでVMを作成し、ストレージとして \"drbdstorage\" もしく" "は他の定義されているプールを選択することでDRBDボリュームを使用できます。" #. type: Plain text msgid "" "Starting from version 5 of the plugin one can set the option \"preferlocal " "yes\". If it is set, the plugin tries to create a diskful assignment on the " "node that issued the storage create command. With this option one can make " "sure the VM gets local storage if possible. Without that option LINSTOR " "might place the storage on nodes 'B' and 'C', while the VM is initially " "started on node 'A'. This would still work as node 'A' then would get a " "diskless assignment, but having local storage might be preferred." msgstr "" "プラグインのバージョン 5 以降、オプション \"preferlocal yes\" を設定できま" "す。設定されている場合、プラグインは storage create コマンドを発行したノード" "でディスクフル割り当てを作成しようとします。このオプションを使用すると、可能" "であれば VM がローカルストレージを確実に取得できるようになります。このオプ" "ションがないと、VM はノード 'A' で起動するが、LINSTORはノード 'B' と 'C' にス" "トレージを配置する可能性があります。これは、ノード 'A' がディスクレス割り当て" "で、引き続き機能しますが、ローカルストレージを使用することが望まれます。" #. type: Block title #, no-wrap msgid "NOTE: DRBD supports only the **raw** disk format at the moment." msgstr "注意: DRBDは現時点で **raw** ディスクフォーマットのみをサポートします。" #. type: Plain text msgid "" "At this point you can try to live migrate the VM - as all data is accessible " "on all nodes (even on Diskless nodes) - it will take just a few seconds. The " "overall process might take a bit longer if the VM is under load and if there " "is a lot of RAM being dirtied all the time. But in any case, the downtime " "should be minimal and you will see no interruption at all." msgstr "" "この時点で、VMのライブマイグレーションができます。すべてのノード(ディスクレス" "ノードでも)ですべてのデータにアクセスできるため、わずか数秒で完了します。 VM" "に負荷がかかっていて、ダーティメモリが常に多い場合は、全体的な処理に少し時間" "がかかることがあります。しかし、いずれの場合でも、ダウンタイムは最小限で、中" "断は全く見られません。" #. type: Block title #, no-wrap msgid "Table Configuration Options" msgstr "テーブル構成オプション" #. type: Table #, no-wrap msgid "" "| Option | Meaning\n" "\n" "| `controller` | The IP of the LINSTOR controller (',' separated list allowed)\n" "| `resourcegroup` | The name of a LINSTOR resource group which defines the deployment of new VMs. As described above\n" "| `preferlocal` | Prefer to create local storage (yes/no). As decribed above \n" "| `statuscache` | Time in seconds status information is cached, 0 means no extra cache. Relevant on huge clusters with hundreds of resources. This has to be set on *all* `drbd` storages in `/etc/pve/storage.cfg` to take effect.\n" "| `apicrt` | Path to the client certificate\n" "| `apikey` | Path to the client private key\n" "| `apica` | Path to the CA certificate\n" msgstr "" "| Option | Meaning\n" "\n" "| `controller` | LINSTOR コントローラーの IP (',' で複数指定可能)\n" "| `resourcegroup` | 新しい VM の展開を定義する LINSTOR リソースグループの名前\n" "| `preferlocal` | ローカルストレージ作成を好むかどうか (yes/no) \n" "| `statuscache` | ステータス情報がキャッシュされる秒単位の時間。0 はキャッシュがないことを意味します。数百のリソースを持つ巨大なクラスターで役立ちます。これを有効にするには `/etc/pve/storage.cfg` のすべての `drbd` ストレージに設定する必要があります\n" "| `apicrt` | クライアント証明書へのパス\n" "| `apikey` | クライアントの秘密鍵へのパス\n" "| `apica` | CA 証明書へのパス\n" #. type: Title === #, no-wrap msgid "Making the Controller Highly-Available (optional)" msgstr "コントローラの高可用性 (オプション)" #. type: Plain text msgid "" "Making LINSTOR highly-available is a matter of making the LINSTOR controller " "highly-available. This step is described in Section <>." msgstr "" "LINSTOR を高可用性にするということは、LINSTOR コントローラーを高可用性にする" "ことです。このステップはセクション <> で説明されています。" #. type: Plain text msgid "" "The last -- but crucial -- step is to configure the Proxmox plugin to be " "able to connect to multiple LINSTOR controllers. It will use the first one " "it receives an answer from. This is done by adding a comma-separated list of " "controllers in the `controller` section of the plugin like this:" msgstr "" "最後の(しかし重要な)ステップは、複数の LINSTOR コントローラーに接続できるよ" "うに Proxmox プラグインを構成することです。応答した最初のものを使用するよう" "に、次のようにプラグインの `controller` セクションにコンマ区切りでコントロー" "ラーを指定します。" #. type: delimited block - #, no-wrap msgid "" "drbd: drbdstorage\n" " content images,rootdir\n" " controller 10.11.12.13,10.11.12.14,10.11.12.15\n" " resourcegroup defaultpool\n" msgstr "" "drbd: drbdstorage\n" " content images,rootdir\n" " controller 10.11.12.13,10.11.12.14,10.11.12.15\n" " resourcegroup defaultpool\n"