msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2022-01-06 13:52+0900\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. type: Title == #, no-wrap msgid "LINSTOR Volumes in Openstack" msgstr "OpenStackでのLINSTORボリューム" #. type: Plain text msgid "" "indexterm:[Openstack]indexterm:[Cinder] This chapter describes using LINSTOR " "to provision persistent, replicated, and high-performance block storage for " "Openstack." msgstr "" "indexterm:[Openstack]indexterm:[Cinder] この章では、LINSTOR を使用して、" "Openstack 用の永続的で複製された高性能のブロックストレージをプロビジョニング" "する方法について説明します。" #. type: Title === #, no-wrap msgid "Openstack Overview" msgstr "Openstack の概要" #. type: Plain text msgid "" "Openstack consists of a wide range of individual services; The service " "responsible for provisioning and managing block storage is called https://" "docs.openstack.org/cinder/latest/[Cinder]. Other openstack services such as " "the compute instance service https://docs.openstack.org/nova/latest[Nova] " "can request volumes from Cinder. Cinder will then make a volume accessible " "to the requesting service." msgstr "" "Openstack は、さまざまな個別のサービスで構成されています。ブロックストレージ" "のプロビジョニングと管理を担当するサービスは https://docs.openstack.org/" "cinder/latest/[Cinder] と呼ばれます。コンピューティングインスタンスサービス " "https://docs.openstack.org/nova/latest[Nova] などの他の openstack サービス" "は、Cinder にボリュームをリクエストできます。その後、Cinder は、要求元のサー" "ビスがボリュームにアクセスできるようにします。" #. type: Plain text msgid "" "LINSTOR can integrate with Cinder using a *volume driver*. The volume driver " "translates calls to the Cinder API to LINSTOR commands. For example: " "requesting a volume from Cinder will create new resources in LINSTOR, Cinder " "Volume snapshots translate to snapshots in LINSTOR and so on." msgstr "" "LINSTOR は、ボリュームドライバーを使用して Cinder と統合できます。ボリューム" "ドライバーは、CinderAPI への呼び出しを LINSTOR コマンドに変換します。例えば " "Cinderにボリュームを要求すると、LINSTOR に新しいリソースが作成され、Cinder ボ" "リュームのスナップショットは LINSTOR のスナップショットに変換されます。" #. type: Title === #, no-wrap msgid "LINSTOR for Openstack Installation" msgstr "Openstack のLINSTOR インストレーション" #. type: Plain text msgid "" "An initial installation and configuration of DRBD and LINSTOR must be " "completed prior to using the OpenStack driver." msgstr "" "OpenStack ドライバーを使用する前に、DRBD と LINSTOR の初期インストールと構成" "を完了する必要があります。" #. type: Plain text msgid "A detailed installation guide can be found <>." msgstr "" "インストールガイドの詳細は <> を参照ください。また以下" "も参照ください。" #. type: Plain text msgid "<> your cluster" msgstr "<>" #. type: Plain text msgid "Learn how to use the <>" msgstr "<>" #. type: Plain text msgid "" "<> to the LINSTOR " "cluster" msgstr "" "<>" #. type: Plain text msgid "" "At this point you should be able to list your storage cluster nodes using " "the LINSTOR client:" msgstr "" "この時点で、LINSTOR クライアントを使用してストレージクラスターノードを一覧表" "示できるはずです。" #. type: delimited block - #, no-wrap msgid "" "$ linstor node info\n" "╭────────────────────────────────────────────────────────────────────────────╮\n" "┊ Node ┊ NodeType ┊ Addresses ┊ State ┊\n" "╞════════════════════════════════════════════════════════════════════════════╡\n" "┊ cinder-01.openstack.test ┊ COMBINED ┊ 10.43.224.21:3366 (PLAIN) ┊ Online ┊\n" "┊ cinder-02.openstack.test ┊ COMBINED ┊ 10.43.224.22:3366 (PLAIN) ┊ Online ┊\n" "┊ storage-01.openstack.test ┊ SATELLITE ┊ 10.43.224.11:3366 (PLAIN) ┊ Online ┊\n" "┊ storage-02.openstack.test ┊ SATELLITE ┊ 10.43.224.12:3366 (PLAIN) ┊ Online ┊\n" "┊ storage-03.openstack.test ┊ SATELLITE ┊ 10.43.224.13:3366 (PLAIN) ┊ Online ┊\n" "╰────────────────────────────────────────────────────────────────────────────╯\n" msgstr "" "╭────────────────────────────────────────────────────────────────────────────╮\n" "┊ Node ┊ NodeType ┊ Addresses ┊ State ┊\n" "╞════════════════════════════════════════════════════════════════════════════╡\n" "┊ cinder-01.openstack.test ┊ COMBINED ┊ 10.43.224.21:3366 (PLAIN) ┊ Online ┊\n" "┊ cinder-02.openstack.test ┊ COMBINED ┊ 10.43.224.22:3366 (PLAIN) ┊ Online ┊\n" "┊ storage-01.openstack.test ┊ SATELLITE ┊ 10.43.224.11:3366 (PLAIN) ┊ Online ┊\n" "┊ storage-02.openstack.test ┊ SATELLITE ┊ 10.43.224.12:3366 (PLAIN) ┊ Online ┊\n" "┊ storage-03.openstack.test ┊ SATELLITE ┊ 10.43.224.13:3366 (PLAIN) ┊ Online ┊\n" "╰────────────────────────────────────────────────────────────────────────────╯\n" #. type: Plain text msgid "" "You should <> per node. " "This guide assumes the storage pool is named `cinderpool`. LINSTOR should " "list the storage pool for each node, including the diskless storage pool " "created by default." msgstr "" "また、ノードごとに 1 つ以上の <> を構成する" "必要があります。このガイドでは、ストレージプールの名前が `cinderpool` である" "と仮定しています。LINSTOR は デフォルトで作成されたディスクレスストレージプー" "ルを含む、各ノードのストレージプールを一覧表示します。" #. type: delimited block - #, no-wrap msgid "" "$ linstor storage-pool list\n" "╭─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮\n" "┊ StoragePool ┊ Node ┊ Driver ┊ PoolName ┊ FreeCapacity ┊ TotalCapacity ┊ CanSnapshots ┊ State ┊\n" "╞═════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╡\n" "┊ DfltDisklessStorPool ┊ cinder-01.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ cinder-02.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ storage-01.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ storage-02.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ storage-03.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ cinderpool ┊ storage-01.openstack.test ┊ LVM_THIN ┊ ssds/cinderpool ┊ 100 GiB ┊ 100 GiB ┊ True ┊ Ok ┊\n" "┊ cinderpool ┊ storage-02.openstack.test ┊ LVM_THIN ┊ ssds/cinderpool ┊ 100 GiB ┊ 100 GiB ┊ True ┊ Ok ┊\n" "┊ cinderpool ┊ storage-03.openstack.test ┊ LVM_THIN ┊ ssds/cinderpool ┊ 100 GiB ┊ 100 GiB ┊ True ┊ Ok ┊\n" "╰─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯\n" msgstr "" "$ linstor storage-pool list\n" "╭─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮\n" "┊ StoragePool ┊ Node ┊ Driver ┊ PoolName ┊ FreeCapacity ┊ TotalCapacity ┊ CanSnapshots ┊ State ┊\n" "╞═════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════════╡\n" "┊ DfltDisklessStorPool ┊ cinder-01.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ cinder-02.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ storage-01.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ storage-02.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ DfltDisklessStorPool ┊ storage-03.openstack.test ┊ DISKLESS ┊ ┊ ┊ ┊ False ┊ Ok ┊\n" "┊ cinderpool ┊ storage-01.openstack.test ┊ LVM_THIN ┊ ssds/cinderpool ┊ 100 GiB ┊ 100 GiB ┊ True ┊ Ok ┊\n" "┊ cinderpool ┊ storage-02.openstack.test ┊ LVM_THIN ┊ ssds/cinderpool ┊ 100 GiB ┊ 100 GiB ┊ True ┊ Ok ┊\n" "┊ cinderpool ┊ storage-03.openstack.test ┊ LVM_THIN ┊ ssds/cinderpool ┊ 100 GiB ┊ 100 GiB ┊ True ┊ Ok ┊\n" "╰─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯\n" #. type: Title ==== #, no-wrap msgid "Upgrades of LINSTOR driver" msgstr "LINSTOR ドライバをアップグレード" #. type: Plain text msgid "" "If this is a fresh installation, skip this section and continue with <>." msgstr "" "新規インストールの場合、このセクションをスキップして <> に進んでください。" #. type: Title ===== #, no-wrap msgid "From 1.x to 2.x" msgstr "1.x から 2.x へのアップグレード" #. type: Plain text msgid "" "Driver version 2 dropped some static configuration options in favour of " "managing these options at runtime via <>." msgstr "" "ドライバーバージョン 2 は、実行時に <> でこれらのオプションを管理するため、いくつかの静的構成オプションを削除し" "ました。" #. type: Table #, no-wrap msgid "" "| Option in `cinder.conf` | Status | Replace with\n" "| `linstor_autoplace_count` | removed | Use the `linstor:redundancy` property on the volume type. Using a value of 0 for full cluster replication is not supported, use the advanced options of <>\n" "| `linstor_controller_diskless` | removed | No replacement needed, the driver will create a diskless resource on the cinder host when required\n" "| `linstor_default_blocksize` | removed | This setting had no effect.\n" "| `linstor_default_storage_pool_name` | deprecated | This setting is deprecated for removal in a future version. Use the `linstor:storage_pool` property on the volume type instead.\n" "| `linstor_default_uri` | deprecated | Replaced by the more aptly named `linstor_uris`.\n" "| `linstor_default_volume_group_name` | removed | Creating nodes and storage pools was completely removed in Driver version 2. See <>\n" "| `linstor_volume_downsize_factor` | removed | This setting served no purpose, it was removed without replacement.\n" msgstr "" "| Option in `cinder.conf` | Status | Replace with\n" "| `linstor_autoplace_count` | 削除 | ボリュームタイプで `linstor:redundancy` プロパティを使用します。フルクラスターレプリケーションで値 0 を使用することはサポートされていません。<> オプションを使用してください\n" "| `linstor_controller_diskless` | 削除 | 置き換えは必要ありません。ドライバーは必要に応じて cinder ホスト上にディスクレスリソースを作成します\n" "| `linstor_default_blocksize` | 削除 | この設定は効果がありませんでした\n" "| `linstor_default_storage_pool_name` | 非推奨 | この設定は、将来のバージョンで削除するために非推奨になりました。代わりに、ボリュームタイプで `linstor:storage_pool` プロパティを使用してください\n" "| `linstor_default_uri` | 非推奨 | より適切な名前の `linstor_uris` に置き換えられました\n" "| `linstor_default_volume_group_name` | 削除 | ノードとストレージプールの作成は、ドライバーバージョン 2 で削除されました。<> を参照してください\n" "| `linstor_volume_downsize_factor` | 削除 | この設定は目的を果たさず、置き換えなしで削除されました\n" #. type: Title ==== #, no-wrap msgid "Install the LINSTOR driver" msgstr "LINSTOR ドライバをインストール" #. type: Plain text msgid "" "Starting with OpenStack Stein, the LINSTOR driver is part of the Cinder " "project. While the driver can be used as is, it might be missing features or " "fixes available in newer version. Due to OpenStacks update policy for stable " "versions, most improvements to the driver will not get back-ported to older " "stable releases." msgstr "" "OpenStack Stein 以降、LINSTOR ドライバーは Cinder プロジェクトの一部です。ド" "ライバはそのまま使用できますが、新しいバージョンで利用できる機能や修正が不足" "している可能性があります。安定バージョンの OpenStacks 更新ポリシーにより、ド" "ライバーに対するほとんどの改善は、古い安定リリースにバックポートされません。" #. type: Plain text msgid "" "https://github.com/LINBIT/openstack-cinder[LINBIT maintains a fork] of the " "Cinder repository with all improvements to the LINSTOR driver backported to " "the supported stable versions. Currently, these are:" msgstr "" "LINBIT は Cinder リポジトリーの https://github.com/LINBIT/openstack-" "cinder[フォーク] をメンテナンスしています。ここには、サポートされている安定し" "たバージョンにバックポートされた LINSTOR ドライバーのすべての改善が含まれてい" "ます。現在、これらは次のとおりです。" #. type: Table #, no-wrap msgid "" "| OpenStack Release | Included Version | LINBIT Version | LINBIT Branch\n" "| `wallaby` | 1.0.1 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fwallaby[`linstor/stable/wallaby`]\n" "| `victoria` | 1.0.1 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fvictoria[`linstor/stable/victoria`]\n" "| `ussuri` | 1.0.1 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fussuri[`linstor/stable/ussuri`]\n" "| `train` | 1.0.0 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Ftrain[`linstor/stable/train`]\n" "| `stein` | 1.0.0 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fstein[`linstor/stable/stein`]\n" "| `rocky` | n/a | n/a | n/a\n" "| `queens` | n/a | n/a | n/a\n" "| `pike` | n/a | n/a | n/a\n" msgstr "" "| OpenStack Release | Included Version | LINBIT Version | LINBIT Branch\n" "| `wallaby` | 1.0.1 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fwallaby[`linstor/stable/wallaby`]\n" "| `victoria` | 1.0.1 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fvictoria[`linstor/stable/victoria`]\n" "| `ussuri` | 1.0.1 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fussuri[`linstor/stable/ussuri`]\n" "| `train` | 1.0.0 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Ftrain[`linstor/stable/train`]\n" "| `stein` | 1.0.0 | 2.0.0 | https://github.com/LINBIT/openstack-cinder/tree/linstor%2Fstable%2Fstein[`linstor/stable/stein`]\n" "| `rocky` | n/a | n/a | n/a\n" "| `queens` | n/a | n/a | n/a\n" "| `pike` | n/a | n/a | n/a\n" #. type: Plain text msgid "" "The exact steps to enable the Linstor Driver depend on your OpenStack " "distribution. In general, the `python-linstor` package needs to be installed " "on all hosts running the Cinder volume service. The next section will cover " "the installation process for common OpenStack distributions." msgstr "" "Linstor Driver を有効にする正しい手順は、OpenStack ディストリビューションに" "よって異なります。一般に `python-linstor` パッケージは、Cinder ボリュームサー" "ビスを実行しているすべてのホストにインストールする必要があります。次のセク" "ションでは、一般的な OpenStack ディストリビューションへのインストール手順につ" "いて説明します。" #. type: Title ===== #, no-wrap msgid "DevStack" msgstr "DevStack" #. type: Plain text msgid "" "https://docs.openstack.org/devstack/latest/[DevStack] is a great way to try " "out OpenStack in a lab environment. To use the most recent driver use the " "following DevStack configuration:" msgstr "" "https://docs.openstack.org/devstack/latest/[DevStack] は、ラボ環境で " "OpenStack を試すのに最適な方法です。最新のドライバーを使用するには、次の " "DevStack 構成を使用します。" #. type: Block title #, no-wrap msgid "local.conf" msgstr "local.conf" #. type: delimited block - #, no-wrap msgid "" "# This ensures the Linstor Driver has access to the 'python-linstor' package.\n" "#\n" "# This is needed even if using the included driver!\n" "USE_VENV=True\n" "ADDITIONAL_VENV_PACKAGES=python-linstor\n" msgstr "" "# This ensures the Linstor Driver has access to the 'python-linstor' package.\n" "#\n" "# This is needed even if using the included driver!\n" "USE_VENV=True\n" "ADDITIONAL_VENV_PACKAGES=python-linstor\n" #. type: delimited block - #, no-wrap msgid "" "# This is required to select the LINBIT version of the driver\n" "CINDER_REPO=https://github.com/LINBIT/openstack-cinder.git\n" "# Replace linstor/stable/victoria with the reference matching your Openstack release.\n" "CINDER_BRANCH=linstor/stable/victoria\n" msgstr "" "# This is required to select the LINBIT version of the driver\n" "CINDER_REPO=https://github.com/LINBIT/openstack-cinder.git\n" "# Replace linstor/stable/victoria with the reference matching your Openstack release.\n" "CINDER_BRANCH=linstor/stable/victoria\n" #. type: Title ===== #, no-wrap msgid "Kolla" msgstr "Kolla" #. type: Plain text msgid "" "https://docs.openstack.org/kolla/latest/[Kolla] packages OpenStack " "components in containers. They can then be deployed, for example using " "https://docs.openstack.org/kolla-ansible/latest/[Kolla Ansible] You can take " "advantage of the available customisation options for kolla containers to set " "up the Linstor driver." msgstr "" "https://docs.openstack.org/kolla/latest/[Kolla] は OpenStack コンポーネントを" "コンテナーにパッケージ化します。次に、例えば https://docs.openstack.org/" "kolla-ansible/latest/[Kolla Ansible] を使用してデプロイできます。kolla コンテ" "ナーで使用可能なカスタマイズオプションを利用して、Linstor ドライバーをセット" "アップできます。" #. type: Plain text msgid "" "To ensure that the required `python-linstor` package is installed, use the " "following override file:" msgstr "" "必要な `python-linstor` パッケージがインストールされるようにするには、次の" "オーバーライドファイルを使用します。" #. type: Block title #, no-wrap msgid "template-override.j2" msgstr "template-override.j2" #. type: delimited block - #, no-wrap msgid "{% extends parent_template %}\n" msgstr "{% extends parent_template %}\n" #. type: delimited block - #, no-wrap msgid "" "# Cinder\n" "{% set cinder_base_pip_packages_append = ['python-linstor'] %}\n" msgstr "" "# Cinder\n" "{% set cinder_base_pip_packages_append = ['python-linstor'] %}\n" #. type: Plain text msgid "" "To install the LINBIT version of the driver, update your `kolla-build.conf`" msgstr "" "LINBIT バージョンのドライバーをインストールするには `kolla-build.conf` を更新" "します。" #. type: Block title #, no-wrap msgid "/etc/kolla/kolla-build.conf" msgstr "/etc/kolla/kolla-build.conf" #. type: delimited block - #, no-wrap msgid "" "[cinder-base]\n" "type = git\n" "location = https://github.com/LINBIT/openstack-cinder.git\n" "# Replace linstor/stable/victoria with the reference matching your Openstack release.\n" "reference = linstor/stable/victoria\n" msgstr "" "[cinder-base]\n" "type = git\n" "location = https://github.com/LINBIT/openstack-cinder.git\n" "# Replace linstor/stable/victoria with the reference matching your Openstack release.\n" "reference = linstor/stable/victoria\n" #. type: Plain text msgid "To rebuild the Cinder containers, run:" msgstr "Cinder コンテナを再構築するには、次のコマンドを実行します。" #. type: delimited block - #, no-wrap msgid "" "# A private registry used to store the kolla container images\n" "REGISTRY=deployment-registry.example.com\n" "# The image namespace in the registry\n" "NAMESPACE=kolla\n" "# The tag to apply to all images. Use the release name for compatibility with kolla-ansible\n" "TAG=victoria\n" "kolla-build -t source --template-override template-override.j2 cinder --registry $REGISTRY --namespace $NAMESPACE --tag $TAG\n" msgstr "" "# A private registry used to store the kolla container images\n" "REGISTRY=deployment-registry.example.com\n" "# The image namespace in the registry\n" "NAMESPACE=kolla\n" "# The tag to apply to all images. Use the release name for compatibility with kolla-ansible\n" "TAG=victoria\n" "kolla-build -t source --template-override template-override.j2 cinder --registry $REGISTRY --namespace $NAMESPACE --tag $TAG\n" #. type: Plain text msgid "====== Kolla Ansible" msgstr "====== Kolla Ansible" #. type: Plain text msgid "" "When deploying OpenStack using Kolla Ansible, you need to make sure that:" msgstr "" "Kolla Ansible を使用して OpenStack をデプロイする場合は、次のことを確認する必" "要があります。" #. type: Plain text msgid "the custom Cinder images, created in the section above, are used" msgstr "上記のセクションで作成されたカスタム Cinder イメージが使用される" #. type: Plain text msgid "deployment of Cinder services is enabled" msgstr "Cinder サービスのデプロイが有効である" #. type: Block title #, no-wrap msgid "/etc/kolla/globals.yml" msgstr "/etc/kolla/globals.yml" #. type: delimited block - #, no-wrap msgid "" "# use \"source\" images\n" "kolla_install_type: source\n" "# use the same registry as for running kolla-build above\n" "docker_registry: deployment-registry.example.com\n" "# use the same namespace as for running kolla-build above\n" "docker_namespace: kolla\n" "# deploy cinder block storage service\n" "enable_cinder: \"yes\"\n" "# disable verification of cinder backends, kolla-ansible only supports a small subset of available backends for this\n" "skip_cinder_backend_check: True\n" "# add the LINSTOR backend to the enabled backends. For backend configuration see below\n" "cinder_enabled_backends:\n" " - name: linstor-drbd\n" msgstr "" "# use \"source\" images\n" "kolla_install_type: source\n" "# use the same registry as for running kolla-build above\n" "docker_registry: deployment-registry.example.com\n" "# use the same namespace as for running kolla-build above\n" "docker_namespace: kolla\n" "# deploy cinder block storage service\n" "enable_cinder: \"yes\"\n" "# disable verification of cinder backends, kolla-ansible only supports a small subset of available backends for this\n" "skip_cinder_backend_check: True\n" "# add the LINSTOR backend to the enabled backends. For backend configuration see below\n" "cinder_enabled_backends:\n" " - name: linstor-drbd\n" #. type: Plain text msgid "" "You can place the Linstor driver configuration in one of the override " "directories for kolla-ansible. For more details on the available " "configuration options, see the section below." msgstr "" "Linstor ドライバー構成は kolla-ansible のオーバーライドディレクトリの 1 つに" "配置できます。使用可能な構成オプションの詳細については、以下のセクションを参" "照してください。" #. type: Block title #, no-wrap msgid "/etc/kolla/config/cinder/cinder-volume.conf" msgstr "/etc/kolla/config/cinder/cinder-volume.conf" #. type: delimited block - #, no-wrap msgid "" "[linstor-drbd]\n" "volume_backend_name = linstor-drbd\n" "volume_driver = cinder.volume.drivers.linstordrv.LinstorDrbdDriver\n" "linstor_uris = linstor://cinder-01.openstack.test,linstor://cinder-02.openstack.test\n" msgstr "" "[linstor-drbd]\n" "volume_backend_name = linstor-drbd\n" "volume_driver = cinder.volume.drivers.linstordrv.LinstorDrbdDriver\n" "linstor_uris = linstor://cinder-01.openstack.test,linstor://cinder-02.openstack.test\n" #. type: Title ===== #, no-wrap msgid "OpenStack Ansible" msgstr "OpenStack Ansible" #. type: Plain text msgid "" "https://docs.openstack.org/openstack-ansible/[OpenStack Ansible] provides " "Ansible playbooks to configure and deploy of OpenStack environments. It " "allows for fine-grained customization of the deployment, letting you set up " "the Linstor driver directly." msgstr "" "https://docs.openstack.org/openstack-ansible/[OpenStack Ansible] は、" "OpenStack 環境を構成およびデプロイするための Ansible プレイブックを提供しま" "す。これにより、デプロイメントをきめ細かくカスタマイズできるため、Linstor ド" "ライバーを直接セットアップできます。" #. type: Block title #, no-wrap msgid "/etc/openstack_ansile/user_variables.yml" msgstr "/etc/openstack_ansile/user_variables.yml" #. type: delimited block - #, no-wrap msgid "" "cinder_git_repo: https://github.com/LINBIT/openstack-cinder.git\n" "cinder_git_install_branch: linstor/stable/victoria\n" msgstr "" "cinder_git_repo: https://github.com/LINBIT/openstack-cinder.git\n" "cinder_git_install_branch: linstor/stable/victoria\n" #. type: delimited block - #, no-wrap msgid "" "cinder_user_pip_packages:\n" " - python-linstor\n" msgstr "" "cinder_user_pip_packages:\n" " - python-linstor\n" #. type: delimited block - #, no-wrap msgid "" "cinder_backends: <1>\n" " linstor-drbd:\n" " volume_backend_name: linstor-drbd\n" " volume_driver: cinder.volume.drivers.linstordrv.LinstorDrbdDriver\n" " linstor_uris: linstor://cinder-01.openstack.test,linstor://cinder-02.openstack.test\n" msgstr "" "cinder_backends: <1>\n" " linstor-drbd:\n" " volume_backend_name: linstor-drbd\n" " volume_driver: cinder.volume.drivers.linstordrv.LinstorDrbdDriver\n" " linstor_uris: linstor://cinder-01.openstack.test,linstor://cinder-02.openstack.test\n" #. type: Plain text msgid "" "A detailed description of the available backend parameters can be found in " "the section below" msgstr "" "使用可能なバックエンドパラメータの詳細な説明は、以下のセクションにあります。" #. type: Title ===== #, no-wrap msgid "Generic Cinder deployment" msgstr "汎用 Cinder デプロイメント" #. type: Plain text msgid "" "For other forms of OpenStack deployments, this guide can only provide non-" "specific hints." msgstr "" "他の形式の OpenStack デプロイメントの場合、このガイドでは一般的なヒントのみを" "提供できます。" #. type: Plain text msgid "" "To update the Linstor driver version, find your cinder installation. Some " "likely paths are:" msgstr "" "Linstor ドライバーのバージョンを更新するには、インストールされた cinder ディ" "レクトリを見つけてください。考えられるパスは次のとおりです。" #. type: delimited block - #, no-wrap msgid "" "/usr/lib/python3.6/dist-packages/cinder/\n" "/usr/lib/python3.6/site-packages/cinder/\n" "/usr/lib/python2.7/dist-packages/cinder/\n" "/usr/lib/python2.7/site-packages/cinder/\n" msgstr "" "/usr/lib/python3.6/dist-packages/cinder/\n" "/usr/lib/python3.6/site-packages/cinder/\n" "/usr/lib/python2.7/dist-packages/cinder/\n" "/usr/lib/python2.7/site-packages/cinder/\n" #. type: Plain text msgid "" "The Linstor driver consists of a single file called `linstordrv.py`, located " "in the Cinder directory:" msgstr "" "Linstor ドライバーは、cinder ディレクトリにある `linstordrv.py` というファイ" "ルです。" #. type: delimited block - #, no-wrap msgid "$CINDER_PATH/volume/drivers/linstordrv.py\n" msgstr "$CINDER_PATH/volume/drivers/linstordrv.py\n" #. type: Plain text msgid "" "To update the driver, replace the file with one from the LINBIT repository" msgstr "" "ドライバを更新するには、ファイルを LINBIT リポジトリのファイルに置き換えます" #. type: delimited block - #, no-wrap msgid "" "RELEASE=linstor/stable/victoria\n" "curl -fL \"https://raw.githubusercontent.com/LINBIT/openstack-cinder/$RELEASE/cinder/volume/drivers/linstordrv.py\" > $CINDER_PATH/volume/drivers/linstordrv.py\n" msgstr "" "RELEASE=linstor/stable/victoria\n" "curl -fL \"https://raw.githubusercontent.com/LINBIT/openstack-cinder/$RELEASE/cinder/volume/drivers/linstordrv.py\" > $CINDER_PATH/volume/drivers/linstordrv.py\n" #. type: Plain text msgid "" "You might also need to remove the Python cache for the update to be " "registered:" msgstr "" "登録されたものを更新するには、Python キャッシュを削除する必要がある場合もあり" "ます。" #. type: delimited block - #, no-wrap msgid "rm -rf $CINDER_PATH/volume/drivers/__pycache__\n" msgstr "rm -rf $CINDER_PATH/volume/drivers/__pycache__\n" #. type: Title === #, no-wrap msgid "Configure a Linstor Backend for Cinder" msgstr "Cinder 用の Linstor バックエンドを構成" #. type: Plain text msgid "" "To use the Linstor driver, configure the Cinder volume service. This is done " "by editing the Cinder configuration file and then restarting the Cinder " "Volume service." msgstr "" "Linstor ドライバーを使用するには、Cinder ボリュームサービスを構成します。" "Cinder 構成ファイルを編集してから、Cinder ボリュームサービスを再起動すること" "で構成できます。" #. type: Plain text msgid "" "Most of the time, the Cinder configuration file is located at `/etc/cinder/" "cinder.conf`. Some deployment options allow manipulating this file in " "advance. See the section above for specifics." msgstr "" "ほとんどの場合、Cinder 構成ファイルは `/etc/cinder/cinder.conf` にあります。" "一部のデプロイメントでは、このファイルを事前に編集できます。詳細は上記のセク" "ションを参照してください。" #. type: Plain text msgid "" "To configure a new volume backend using Linstor, add the following section " "to `cinder.conf`" msgstr "" "Linstor を使用して新しいボリュームバックエンドを構成するには、次のセクション" "を `cinder.conf` に追加します。" #. type: delimited block - #, no-wrap msgid "" "[linstor-drbd]\n" "volume_backend_name = linstor-drbd <1>\n" "volume_driver = cinder.volume.drivers.linstordrv.LinstorDrbdDriver <2>\n" "linstor_uris = linstor://cinder-01.openstack.test,linstor://cinder-02.openstack.test <3>\n" "linstor_trusted_ca = /path/to/trusted/ca.cert <4>\n" "linstor_client_key = /path/to/client.key <5>\n" "linstor_client_cert = /path/to/client.cert <5>\n" "# Deprecated or removed in 2.0.0\n" "linstor_default_storage_pool_name = cinderpool <6>\n" "linstor_autoplace_count = 2 <7>\n" "linstor_controller_diskless = true <8>\n" "# non-linstor-specific options\n" "... <9>\n" msgstr "" "[linstor-drbd]\n" "volume_backend_name = linstor-drbd <1>\n" "volume_driver = cinder.volume.drivers.linstordrv.LinstorDrbdDriver <2>\n" "linstor_uris = linstor://cinder-01.openstack.test,linstor://cinder-02.openstack.test <3>\n" "linstor_trusted_ca = /path/to/trusted/ca.cert <4>\n" "linstor_client_key = /path/to/client.key <5>\n" "linstor_client_cert = /path/to/client.cert <5>\n" "# Deprecated or removed in 2.0.0\n" "linstor_default_storage_pool_name = cinderpool <6>\n" "linstor_autoplace_count = 2 <7>\n" "linstor_controller_diskless = true <8>\n" "# non-linstor-specific options\n" "... <9>\n" #. type: Plain text msgid "" "The parameters described here are based on the latest release provided by " "Linbit. The driver included in OpenStack might not support all of these " "parameters. Take a look at the https://docs.openstack.org/cinder/latest/" "configuration/block-storage/drivers/linstor-driver.html[OpenStack driver " "documentation] to find out more." msgstr "" "ここで説明するパラメーターは、Linbit が提供する最新のリリースに基づいていま" "す。 OpenStack に含まれているドライバーは、これらのパラメーターのすべてをサ" "ポートしているとは限りません。詳細は https://docs.openstack.org/cinder/" "latest/configuration/block-storage/drivers/linstor-driver.html[OpenStack ドラ" "イバーのドキュメント] を参照ください。" #. type: Plain text msgid "" "The name of the volume backend. Needs to be unique in the Cinder " "configuration. The whole section should share the same name. This name is " "referenced again in `cinder.conf` in the `enabled_backends` setting and when " "creating a new volume type." msgstr "" "ボリュームバックエンド名。 Cinder 構成で一意である必要があります。セクション" "全体で同じ名前を共有する必要があります。この名前は `enabled_backends` 設定の " "`cinder.conf` で、および新しいボリュームタイプを作成するときに再び参照されま" "す。" #. type: Plain text msgid "The version of the Linstor driver to use. There are two options:" msgstr "使用する Linstor ドライバーのバージョン。2 つのオプションがあります。" #. type: Plain text msgid "`cinder.volume.drivers.linstordrv.LinstorDrbdDriver`" msgstr "`cinder.volume.drivers.linstordrv.LinstorDrbdDriver`" #. type: Plain text msgid "`cinder.volume.drivers.linstordrv.LinstorIscsiDriver`" msgstr "`cinder.volume.drivers.linstordrv.LinstorIscsiDriver`" #. type: Plain text msgid "" "Which driver you should use depends on your Linstor set up and requirements. " "Details on each choice are documented in <>" msgstr "" "どのドライバーを使用するかは Linstor のセットアップと要件によって異なります。" "各選択肢の詳細は <> " "を参照ください。" #. type: Plain text msgid "" "The URL(s) of the Linstor Controller(s). Multiple Controllers can be " "specified to make use of <>. If not " "set, defaults to `linstor://localhost`." msgstr "" "Linstor コントローラーの URL。 <> を利用するた" "めに、複数のコントローラーを指定できます。設定されていない場合、デフォルトは " "`linstor://localhost` です。" #. type: Plain text msgid "" "In driver versions prior to 2.0.0, this option is called " "`linstor_default_uri`" msgstr "" "2.0.0 より前のバージョンのドライバーでは、このオプションは " "`linstor_default_uri` と呼ばれます。" #. type: Plain text msgid "" "If <> the referenced certificate " "is used to verify the Linstor Controller authenticity." msgstr "" "<> 指定された証明書を使用し" "て LINSTOR コントローラーの信頼性を検証します。" #. type: Plain text msgid "" "If <> the referenced key and " "certificate will be presented to the Linstor Controller for authentication." msgstr "" "<> 指定されたキーと証明書が、" "認証のために LINSTOR コントローラーで使用されます。" #. type: Plain text #, no-wrap msgid "" "*Deprecated in 2.0.0, use <> instead.* The storage pools to use when placing\n" "resources. Applies to all diskfull resources created. Defaults to `DfltStorPool`.\n" msgstr "2.0.0 で非推奨になったので、代わりに <> を使用してください。リソースを配置するときに使用するストレージプール。作成されたすべてのディスクフルリソースに適用されます。デフォルトは `DfltStorPool` です。\n" #. type: Plain text #, no-wrap msgid "" "*Removed in 2.0.0, use <> instead.* The number of replicas to create for the given\n" "volume. A value of `0` will create a replica on all nodes. Defaults to `0`.\n" msgstr "2.0.0 で非推奨になったので、代わりに <> を使用してください。特定のボリュームに対して作成する複製数。値が `0` の場合、すべてのノードに複製が作成されます。デフォルトは `0` です。\n" #. type: Plain text #, no-wrap msgid "" "*Removed in 2.0.0, volumes are created on demand by the driver.* If set to true, ensures that at least one (diskless) replica is deployed on the Cinder Controller host. This is\n" "useful for ISCSI transports. Defaults to `true`.\n" msgstr "2.0.0 で削除され、ボリュームはドライバーによって必要に応じて作成されます。true に設定すると、少なくとも 1 つの(ディスクレス)複製が Cinder コントローラーホストにデプロイされることを保証します。これは、iSCSIトランスポートに役立ちます。デフォルトは `true` です。\n" #. type: Plain text msgid "" "You can specify more generic Cinder options here, for example `target_helper " "= tgtadm` for the ISCSI connector." msgstr "" "ここでは、より一般的な Cinder オプションを指定できます。たとえば、iSCSI コネ" "クタの場合は `target_helper = tgtadm` です。" #. type: Plain text msgid "" "You can also configure multiple Linstor backends, choosing a different name " "and configuration options for each." msgstr "" "複数の Linstor バックエンドを構成して、それぞれに異なる名前と構成オプションを" "選択することもできます。" #. type: Plain text msgid "" "After configuring the Linstor backend, it should also be enabled. Add it to " "the list of enabled backends in `cinder.conf`, and optionally set is as the " "default backend:" msgstr "" "Linstor バックエンドを構成した後、それも有効にする必要があります。これを " "`cinder.conf` の有効なバックエンドのリストに追加し、オプションでデフォルトの" "バックエンドとして設定します。" #. type: delimited block - #, no-wrap msgid "" "[DEFAULT]\n" "...\n" "default_volume_type = linstor-drbd-volume\n" "enabled_backends = lvm,linstor-drbd\n" "...\n" msgstr "" "[DEFAULT]\n" "...\n" "default_volume_type = linstor-drbd-volume\n" "enabled_backends = lvm,linstor-drbd\n" "...\n" #. type: Plain text msgid "" "As a last step, if you changed the Cinder configuration or updated the " "driver itself, make sure to restart the Cinder service(s). Please check the " "documentation for your OpenStack Distribution on how to restart services." msgstr "" "最後のステップとして、Cinder 構成を変更した場合、またはドライバー自体を更新し" "た場合は、必ず Cinder サービスを再起動してください。サービスを再起動する方法" "については、OpenStack ディストリビューションのドキュメントを確認してくださ" "い。" #. type: Title ==== #, no-wrap msgid "Choice of Transport Protocol" msgstr "トランスポートプロトコルの選択" #. type: Plain text msgid "" "The Transport Protocol in Cinder is how clients (for example nova-compute) " "access the actual volumes. With Linstor, you can choose between two " "different drivers that use different transports." msgstr "" "Cinder のトランスポートプロトコルは、クライアント(たとえば、nova-compute)が" "実際のボリュームにアクセスする方法です。Linstor を使用すると、異なるトランス" "ポートを使用する 2 つの異なるドライバーを選択できます。" #. type: Plain text msgid "" "`cinder.volume.drivers.linstordrv.LinstorDrbdDriver`, which uses DRBD as " "transport" msgstr "" "`cinder.volume.drivers.linstordrv.LinstorDrbdDriver` : トランスポートプロトコ" "ルとして DRBD を使用" #. type: Plain text msgid "" "`cinder.volume.drivers.linstordrv.LinstorIscsiDriver`, which uses ISCSI as " "transport" msgstr "" "`cinder.volume.drivers.linstordrv.LinstorIscsiDriver` : トランスポートプロト" "コルとして iSCSI を使用" #. type: Title ===== #, no-wrap msgid "Using DRBD as Transport Protocol" msgstr "トランスポートプロトコルとして DRBD を使用" #. type: Plain text msgid "" "The `LinstorDrbdDriver` works by ensuring a replica of the volume is " "available locally on the node where a client (i.e. nova-compute) issued a " "request. This only works if _all_ compute nodes are also running Linstor " "Satellites that are part of the same Linstor cluster." msgstr "" "`LinstorDrbdDriver` は、クライアント(つまり、nova-compute)がリクエストを発" "行したノードでボリュームの複製がローカルで利用できるようにすることで機能しま" "す。これはすべての compute ノードが同じ Linstor クラスターの一部である " "Linstor サテライトを実行している場合にのみ機能します。" #. type: Plain text msgid "The advantages of this option are:" msgstr "このオプションの利点は次のとおりです。" #. type: Plain text msgid "" "Once set up, the Cinder host is no longer involved in the data path. All " "read and write to the volume are handled by the local DRBD module, which " "will handle replication across its configured peers." msgstr "" "セットアップが完了すると、Cinder ホストはデータパスに関与しなくなります。ボ" "リュームへのすべての読み書きは、構成された対向ノード間でのレプリケーションを" "処理するローカル DRBD モジュールによって処理されます。" #. type: Plain text msgid "" "Since the Cinder host is not involved in the data path, any disruptions to " "the Cinder service do not affect volumes that are already attached." msgstr "" "Cinder ホストはデータパスに関与していないため、Cinder サービスが中断しても、" "すでに接続されているボリュームには影響しません。" #. type: Plain text msgid "====== Known limitations:" msgstr "====== 既知の制限:" #. type: Plain text msgid "" "Not all hosts and hypervisors support using DRBD volumes. This restricts " "deployment to Linux hosts and `kvm` hypervisors." msgstr "" "すべてのホストとハイパーバイザーが DRBD ボリュームの使用をサポートしているわ" "けではありません。Linux ホストと `kvm` ハイパーバイザーがデプロイメントの対象" "として制限されます。" #. type: Plain text msgid "" "Resizing of attached and in-use volumes does not fully work. While the " "resize itself is successful, the compute service will not propagate it to " "the VM until after a restart." msgstr "" "接続しているボリュームと使用中のボリュームのサイズ変更は完全には機能しませ" "ん。サイズ変更自体は成功していますが、サービスは再起動するまで VM にサイズ変" "更を伝えません。" #. type: Plain text msgid "" "Multi-attach (attaching the same volume on multiple VMs) is not supported." msgstr "" "マルチアタッチ(複数の VM に同じボリュームをアタッチする)はサポートされてい" "ません。" #. type: Plain text msgid "" "https://docs.openstack.org/cinder/latest/configuration/block-storage/volume-" "encryption.html#create-an-encrypted-volume-type[Encrypted volumes] only work " "if udev rules for DRBD devices are in place." msgstr "" "https://docs.openstack.org/cinder/latest/configuration/block-storage/volume-" "encryption.html#create-an-encrypted-volume-type[暗号化されたボリューム] は、" "DRBD デバイスの udev ルールが設定されている場合にのみ機能します。" #. type: Plain text msgid "" "`udev` rules are either part of the `drbd-utils` package or have their own " "`drbd-udev` package." msgstr "" "`udev` ルールは `drbd-utils` パッケージの一部であるか、独自の `drbd-udev` " "パッケージの中にあります。" #. type: Title ===== #, no-wrap msgid "Using ISCSI as Transport Protocol" msgstr "iSCSI トランスポートプロトコルを使用" #. type: Plain text msgid "" "The default way to export Cinder volumes is via iSCSI. This brings the " "advantage of maximum compatibility - iSCSI can be used with every " "hypervisor, be it VMWare, Xen, HyperV, or KVM." msgstr "" "Cinder ボリュームをエクスポートするデフォルトの方法は、iSCSI 経由です。これに" "より最大の互換性が得られます。iSCSI は、VMWare、Xen、HyperV、または KVM など" "のあらゆるハイパーバイザーで使用できます。" #. type: Plain text msgid "" "The drawback is that all data has to be sent to a Cinder node, to be " "processed by an (userspace) iSCSI daemon; that means that the data needs to " "pass the kernel/userspace border, and these transitions will cost some " "performance." msgstr "" "欠点は、すべてのデータを(ユーザースペースの)iSCSI デーモンで処理するために" "Cinder ノードに送信する必要があることです。これは、データがカーネル/ユーザス" "ペース境界を通過する必要があることを意味し、パフォーマンスに影響を与えます。" #. type: Plain text msgid "" "Another drawback is the introduction of a single point of failure. If a " "Cinder node running the iSCSI daemon crashes, other nodes lose access to " "their volumes. There are ways to configure Cinder for automatic fail-over " "to mitigate this, but it requires considerable effort." msgstr "" "もう1つの欠点は、単一障害点になりうる点です。iSCSI デーモンを実行している " "Cinder ノードがクラッシュすると、他のノードはボリュームにアクセスできなくなり" "ます。これを軽減するために自動フェイルオーバー用に Cinder を構成する方法はい" "くつかありますが、かなりの労力が必要です。" #. type: Plain text msgid "" "In driver versions prior to 2.0.0, the Cinder host needs access to a local " "replica of every volume. This can be achieved by either setting " "`linstor_controller_diskless=True` or using `linstor_autoplace_count=0`. " "Newer driver versions will create such a volume on demand." msgstr "" "2.0.0 より前のバージョンのドライバーでは、Cinder ホストはすべてのボリュームの" "ローカルレプリカにアクセスする必要があります。これは " "`linstor_controller_diskless=True` を設定するか `linstor_autoplace_count=0` " "を使用することで実現できます。新しいバージョンのドライバーは、必要に応じてそ" "のようなボリュームを作成します。" #. type: Title ==== #, no-wrap msgid "Verify status of Linstor backends" msgstr "Linstor バックエンドのステータスを確認" #. type: Plain text msgid "" "To verify that all backends are up and running, you can use the OpenStack " "command line client:" msgstr "" "すべてのバックエンドが稼働していることを確認するには、OpenStack コマンドライ" "ンを使用できます。" #. type: delimited block - #, no-wrap msgid "" "$ openstack volume service list\n" "+------------------+----------------------------------------+------+---------+-------+----------------------------+\n" "| Binary | Host | Zone | Status | State | Updated At |\n" "+------------------+----------------------------------------+------+---------+-------+----------------------------+\n" "| cinder-scheduler | cinder-01.openstack.test | nova | enabled | up | 2021-03-10T12:24:37.000000 |\n" "| cinder-volume | cinder-01.openstack.test@linstor-drbd | nova | enabled | up | 2021-03-10T12:24:34.000000 |\n" "| cinder-volume | cinder-01.openstack.test@linstor-iscsi | nova | enabled | up | 2021-03-10T12:24:35.000000 |\n" "+------------------+----------------------------------------+------+---------+-------+----------------------------+\n" msgstr "" "$ openstack volume service list\n" "+------------------+----------------------------------------+------+---------+-------+----------------------------+\n" "| Binary | Host | Zone | Status | State | Updated At |\n" "+------------------+----------------------------------------+------+---------+-------+----------------------------+\n" "| cinder-scheduler | cinder-01.openstack.test | nova | enabled | up | 2021-03-10T12:24:37.000000 |\n" "| cinder-volume | cinder-01.openstack.test@linstor-drbd | nova | enabled | up | 2021-03-10T12:24:34.000000 |\n" "| cinder-volume | cinder-01.openstack.test@linstor-iscsi | nova | enabled | up | 2021-03-10T12:24:35.000000 |\n" "+------------------+----------------------------------------+------+---------+-------+----------------------------+\n" #. type: Plain text msgid "" "If you have the Horizon GUI deployed, check `Admin > System Information > " "Block Storage Service` instead." msgstr "" "Horizon GUI をデプロイしている場合は、代わりに `Admin > System Information > " "Block Storage Service` を確認してください。" #. type: Plain text msgid "" "In the above example all configured services are `enabled` and `up`. If " "there are any issues, please check the logs of the Cinder Volume service." msgstr "" "上記の例では、構成されているすべてのサービスが `enabled` と `up` になっていま" "す。問題がある場合は、Cinder ボリュームサービスのログを確認してください。" #. type: Title === #, no-wrap msgid "Create a new volume type for Linstor" msgstr "Linstor の新しいボリュームタイプを作成" #. type: Plain text msgid "" "Before creating volumes using Cinder, you have to create a volume type. This " "can either be done via the command line:" msgstr "" "Cinder を使用してボリュームを作成する前に、ボリュームタイプを作成する必要があ" "ります。これは、コマンドラインから実行できます。" #. type: delimited block - #, no-wrap msgid "" "# Create a volume using the default backend\n" "$ openstack volume type create default\n" "+-------------+--------------------------------------+\n" "| Field | Value |\n" "+-------------+--------------------------------------+\n" "| description | None |\n" "| id | 58365ffb-959a-4d91-8821-5d72e5c39c26 |\n" "| is_public | True |\n" "| name | default |\n" "+-------------+--------------------------------------+\n" "# Create a volume using a specific backend\n" "$ openstack volume type create --property volume_backend_name=linstor-drbd linstor-drbd-volume\n" "+-------------+--------------------------------------+\n" "| Field | Value |\n" "+-------------+--------------------------------------+\n" "| description | None |\n" "| id | 08562ea8-e90b-4f95-87c8-821ac64630a5 |\n" "| is_public | True |\n" "| name | linstor-drbd-volume |\n" "| properties | volume_backend_name='linstor-drbd' |\n" "+-------------+--------------------------------------+\n" msgstr "" "# Create a volume using the default backend\n" "$ openstack volume type create default\n" "+-------------+--------------------------------------+\n" "| Field | Value |\n" "+-------------+--------------------------------------+\n" "| description | None |\n" "| id | 58365ffb-959a-4d91-8821-5d72e5c39c26 |\n" "| is_public | True |\n" "| name | default |\n" "+-------------+--------------------------------------+\n" "# Create a volume using a specific backend\n" "$ openstack volume type create --property volume_backend_name=linstor-drbd linstor-drbd-volume\n" "+-------------+--------------------------------------+\n" "| Field | Value |\n" "+-------------+--------------------------------------+\n" "| description | None |\n" "| id | 08562ea8-e90b-4f95-87c8-821ac64630a5 |\n" "| is_public | True |\n" "| name | linstor-drbd-volume |\n" "| properties | volume_backend_name='linstor-drbd' |\n" "+-------------+--------------------------------------+\n" #. type: Plain text msgid "" "Alternatively, you can create volume types via the Horizon GUI. Navigate to " "`Admin > Volume > Volume Types` and click \"Create Volume Type\". You can " "assign it a backend by adding the `volume_backend_name` as \"Extra Specs\" " "to it." msgstr "" "あるいは Horizon GUI でボリュームタイプを作成することもできます。`Admin > " "Volume > Volume Types` から \"Create Volume Type\" をクリックします。 " "`volume_backend_name` を \"Extra Specs\" として追加することで、バックエンドを" "割り当てることができます。" #. type: Title ==== #, no-wrap msgid "Advanced Configuration of volume types" msgstr "ボリュームタイプの詳細設定" #. type: Plain text msgid "" "Each volume type can be customized by adding properties or \"Extra Specs\" " "as they are called in the Horizon GUI." msgstr "" "各ボリュームタイプは、Horizon GUI で呼び出されるプロパティまたは \"Extra " "Specs\" を追加することでカスタマイズできます。" #. type: Plain text msgid "To add a property to a volume type on the command line use:" msgstr "" "コマンドラインでボリュームタイプにプロパティを追加するには、次を使用します。" #. type: delimited block - #, no-wrap msgid "openstack volume type set linstor_drbd_b --property linstor:redundancy=5\n" msgstr "openstack volume type set linstor_drbd_b --property linstor:redundancy=5\n" #. type: Plain text msgid "" "Alternatively, you can set the property via the GUI by navigating tp `Admin " "> Volume > Volume Types`. In the `Actions` column, open the dropdown menu " "and click the `View Extra Specs` button. This opens a dialog you can use to " "create, edit and delete properties." msgstr "" "または GUI で `Admin > Volume > Volume Types` から プロパティを設定することも" "できます。 `Actions` 列で、ドロップダウンメニューを開き `View Extra Specs` ボ" "タンをクリックします。これにより、プロパティの作成、編集、削除に使用できるダ" "イアログが開きます。" #. type: Title ===== #, no-wrap msgid "Available volume type properties" msgstr "使用可能なボリュームタイプのプロパティ" #. type: Labeled list #, no-wrap msgid "linstor:diskless_on_remaining" msgstr "linstor:diskless_on_remaining" #. type: Plain text msgid "Create diskless replicas on non-selected nodes after auto-placing." msgstr "自動配置後、選択されていないノードにディスクレスレプリカを作成する。" #. type: Labeled list #, no-wrap msgid "linstor:do_not_place_with_regex" msgstr "linstor:do_not_place_with_regex" #. type: Plain text msgid "" "Do not place the resource on a node which has a resource with a name " "matching the regex." msgstr "正規表現と一致する名前のリソースを持つノードにリソースを配置しない。" #. type: Labeled list #, no-wrap msgid "linstor:layer_list" msgstr "linstor:layer_list" #. type: Plain text msgid "" "Comma-separated list of layers to apply for resources. If empty, defaults to " "DRBD,Storage." msgstr "" "リソースを適用するためのレイヤーのコンマ区切りリスト。空の場合、デフォルトは" "DRBD、Storageです。" #. type: Labeled list #, no-wrap msgid "linstor:provider_list" msgstr "linstor:provider_list" #. type: Plain text msgid "" "Comma-separated list of providers to use. If empty, Linstor will " "automatically choose a suitable provider." msgstr "" "使用するプロバイダーのコンマ区切りリスト。空の場合、LINSTOR は適切なプロバイ" "ダーを自動的に選択します。" #. type: Labeled list #, no-wrap msgid "linstor:redundancy" msgstr "linstor:redundancy" #. type: Plain text msgid "Number of replicas to create. Defaults to 2." msgstr "作成するレプリカの数。デフォルトは 2 です。" #. type: Labeled list #, no-wrap msgid "linstor:replicas_on_different" msgstr "linstor:replicas_on_different" #. type: Plain text msgid "" "A comma-separated list of key or key=value items used as autoplacement " "selection labels when autoplace is used to determine where to provision " "storage." msgstr "" "自動配置を使用してストレージをプロビジョニングする場所を決定するときに、自動" "配置選択ラベルとして使用される key または key=value アイテムのコンマ区切りの" "リスト。" #. type: Labeled list #, no-wrap msgid "linstor:replicas_on_same" msgstr "linstor:replicas_on_same" #. type: Labeled list #, no-wrap msgid "linstor:storage_pool" msgstr "linstor:storage_pool" #. type: Plain text msgid "Comma-separated list of storage pools to use when auto-placing." msgstr "自動配置時に使用するストレージプールのコンマ区切りリスト。" #. type: Labeled list #, no-wrap msgid "linstor:property:*" msgstr "linstor:property:*" #. type: Plain text msgid "" "If a key is prefixed by `linstor:property:`, it is interpreted as a LINSTOR " "property. The property gets set on the <> created for the volume type." msgstr "" "キーの前に `linstor:property:` が付いている場合、そのキーは LINSTOR プロパ" "ティとして解釈されます。プロパティはボリュームタイプ用に作成された <> に設定されます。" #. type: Plain text msgid "" "For example: To change the <> " "`DrbdOptions/auto-quorum` needs to be set. This can be done by setting the " "`linstor:property:DrbdOptions/auto-quorum` property." msgstr "" "例: <> を変更するには `DrbdOptions/auto-" "quorum` を設定する必要があります。これは `linstor:property:DrbdOptions/auto-" "quorum` プロパティを設定することで実行できます。" #. type: Title === #, no-wrap msgid "Using volumes" msgstr "ボリュームの使用" #. type: Plain text msgid "" "Once you have a volume type configured, you can start using it to provision " "new volumes." msgstr "" "ボリュームタイプを構成したら、それを使用して新しいボリュームのプロビジョニン" "グを開始できます。" #. type: Plain text msgid "" "For example, to create a simple 1Gb volume on the command line you can use:" msgstr "" "たとえば、コマンドラインで単純な 1Gb ボリュームを作成するには、次のコマンドを" "使用できます。" #. type: delimited block - #, no-wrap msgid "" "openstack volume create --type linstor-drbd-volume --size 1 --availability-zone nova linstor-test-vol\n" "openstack volume list\n" msgstr "" "openstack volume create --type linstor-drbd-volume --size 1 --availability-zone nova linstor-test-vol\n" "openstack volume list\n" #. type: Plain text msgid "" "If you set `default_volume_type = linstor-drbd-volume` in your `/etc/cinder/" "cinder.conf`, you may omit the `--type linstor-drbd-volume` from the " "`openstack volume create ...` command above." msgstr "" "`/etc/cinder/cinder.conf` に `default_volume_type = linstor-drbd-volume` を設" "定した場合、上記の `openstack volume create ...` コマンドから `--type " "linstor-drbd-volume` を省略できます。" #. type: Title === #, no-wrap msgid "Troubleshooting" msgstr "トラブルシューティング" #. type: Plain text msgid "" "This section describes what to do in case you encounter problems with using " "Linstor volumes and snapshots." msgstr "" "このセクションでは、Linstor ボリュームとスナップショットの使用で問題が発生し" "た場合の対処方法について説明します。" #. type: Title ==== #, no-wrap msgid "Checking for error messages in Horizon" msgstr "Horizon でエラーメッセージを確認する" #. type: Plain text msgid "" "Every volume and snapshot has a Messages tab in the Horizon dashboard. In " "case of errors, the list of messages can be used as a starting point for " "further investigation. Some common messages in case of errors:" msgstr "" "すべてのボリュームとスナップショットには、Horizon ダッシュボードに Messages " "タブがあります。エラーが発生した場合は、メッセージのリストをさらに調査するた" "めの開始点として使用できます。以下はエラーの場合によくあるメッセージです。" #. type: Plain text #, no-wrap msgid " create volume from backend storage:Driver failed to create the volume.\n" msgstr " create volume from backend storage:Driver failed to create the volume.\n" #. type: Plain text msgid "" "There was an error creating a new volume. Check the Cinder Volume service " "logs for more details" msgstr "" "新しいボリュームの作成中にエラーが発生しました。詳細については、Cinder ボ" "リュームサービスログを確認してください。" #. type: Plain text #, no-wrap msgid " schedule allocate volume:Could not find any available weighted backend.\n" msgstr " schedule allocate volume:Could not find any available weighted backend.\n" #. type: Plain text msgid "" "If this is the only error message, this means the Cinder Scheduler could not " "find a volume backend suitable for creating the volume. This is most likely " "because:" msgstr "" "これが唯一のエラーメッセージである場合、Cinder スケジューラがボリュームの作成" "に適したボリュームバックエンドを見つけられなかったことを意味します。これは以" "下の理由が考えられます。" #. type: Plain text msgid "" "The volume backend is offline. See <>" msgstr "" "ボリュームバックエンドはオフラインである。詳細は <> を参照ください。" #. type: Plain text msgid "" "The volume backend has not enough free capacity to fulfil the request. Check " "the output of `cinder get-pools --detail` and `linstor storage-pool list` to " "ensure that the requested capacity is available." msgstr "" "ボリュームバックエンドには、リクエストを満たすのに十分な空き容量がありませ" "ん。 `cinder get-pools--detail` と `linstor storage-pool list` の出力をチェッ" "クして、リクエストされた容量が使用可能であることを確認します。" #. type: Title ==== #, no-wrap msgid "Checking the Cinder Volume Service" msgstr "Cinder ボリュームサービスの確認" #. type: Plain text msgid "The Linstor driver is called as part of the Cinder Volume service." msgstr "" "Linstor ドライバーは、Cinder ボリュームサービスの一部として呼び出されます。" #. type: Table #, no-wrap msgid "" "| Distribution | Log location or command\n" "| DevStack | `journalctl -u devstack@c-vol`\n" msgstr "" "| Distribution | Log location or command\n" "| DevStack | `journalctl -u devstack@c-vol`\n" #. type: Title ==== #, no-wrap msgid "Checking the compute srvice logs" msgstr "Compute サービスログの確認" #. type: Plain text msgid "" "Some issues will not be logged in the Cinder Service but in the actual " "consumer of the volumes, most likely the compute service (Nova). As with the " "volume service, the exact host and location to check depends on your " "Openstack distribution:" msgstr "" "一部の問題は Cinder サービスログに記録されませんが、ボリュームの実際のコン" "シューマー、おそらく Compute サービス(Nova)に記録されます。ボリュームサービ" "スと同様に、確認するホストと正確な場所は、Openstack ディストリビューションに" "よって異なります。" #. type: Table #, no-wrap msgid "" "| Distribution | Log location or command\n" "| DevStack | `journalctl -u devstack@n-cpu`\n" msgstr "" "| Distribution | Log location or command\n" "| DevStack | `journalctl -u devstack@n-cpu`\n"