# SOME DESCRIPTIVE TITLE # Copyright (C) YEAR Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2022-01-06 13:52+0900\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. type: Title === #, no-wrap msgid "Upgrading a LINSTOR Deployment on Kubernetes" msgstr "Kubernetes での LINSTOR デプロイメントのアップグレード" #. type: Plain text msgid "" "A LINSTOR Deployment on Kubernets can be upgraded to a new release using " "Helm." msgstr "" "Kubernets での LINSTOR デプロイメントは、Helm を使用して新しいリリースにアッ" "プグレードできます。" #. type: Plain text msgid "" "Before upgrading to a new release, you should ensure you have an up-to-date " "backup of the LINSTOR database. If you are using the Etcd database packaged " "in the LINSTOR Chart, see <>" msgstr "" "新しいリリースにアップグレードする前に、LINSTOR データベースの最新のバック" "アップがあることを確認する必要があります。LINSTOR チャートにパッケージ化され" "た Etcd データベースを使用している場合は、<> を参照ください。" #. type: Plain text msgid "" "Upgrades using the LINSTOR Etcd deployment require etcd to use persistent " "storage. Only follow these steps if Etcd was deployed using `etcd." "persistentVolume.enabled=true`" msgstr "" "LINSTOR Etcd デプロイメントを使用するアップグレードでは、永続ストレージを使用" "するために etcd が必要です。Etcd が `etcd.persistentVolume.enabled=true` を使" "用してデプロイされた場合にのみ、これらの手順に従ってください。" #. type: Plain text msgid "Upgrades will update to new versions of the following components:" msgstr "アップグレードは、次のコンポーネントを新しいバージョンに更新します。" #. type: Plain text msgid "LINSTOR operator deployment" msgstr "LINSTOR オペレーターのデプロイメント" #. type: Plain text msgid "LINSTOR Controller" msgstr "LINSTOR コントローラー" #. type: Plain text msgid "LINSTOR Satellite" msgstr "LINSTOR サテライト" #. type: Plain text msgid "LINSTOR CSI Driver" msgstr "LINSTOR CSI Driver" #. type: Plain text msgid "Etcd" msgstr "Etcd" #. type: Plain text msgid "Stork" msgstr "Stork" #. type: Plain text msgid "" "Some versions require special steps, please take a look <> The main command to upgrade to a new LINSTOR operator " "version is:" msgstr "" "一部のバージョンでは特別な手順が必要です。 <> を参照ください。LINSTOR オペレーターの新しいバージョンにアップグレード" "するための主なコマンドは次のとおりです。" #. type: delimited block - #, no-wrap msgid "" "helm repo update\n" "helm upgrade linstor-op linstor/linstor\n" msgstr "" "helm repo update\n" "helm upgrade linstor-op linstor/linstor\n" #. type: Plain text msgid "" "If you used any customizations on the initial install, pass the same options " "to `helm upgrade`. The options currently in use can be retrieved from Helm." msgstr "" "初期インストールでカスタマイズを使用した場合は、同じオプションを `helm " "upgrade` に渡します。現在使用されているオプションは、Helm から取得できます。" #. type: delimited block - #, no-wrap msgid "" "# Retrieve the currently set options\n" "$ helm get values linstor-op\n" "USER-SUPPLIED VALUES:\n" "USER-SUPPLIED VALUES: null\n" "drbdRepoCred: drbdiocred\n" "operator:\n" " satelliteSet:\n" " kernelModuleInjectionImage: drbd.io/drbd9-rhel8:v9.0.28\n" " storagePools:\n" " lvmThinPools:\n" " - devicePaths:\n" " - /dev/vdb\n" " name: thinpool\n" " thinVolume: thinpool\n" " volumeGroup: \"\"\n" "# Save current options\n" "$ helm get values linstor-op > orig.yaml\n" "# modify values here as needed. for example selecting a newer DRBD image\n" "$ vim orig.yaml\n" "# Start the upgrade\n" "$ helm upgrade linstor-op linstor/linstor -f orig.yaml\n" msgstr "" "# Retrieve the currently set options\n" "$ helm get values linstor-op\n" "USER-SUPPLIED VALUES:\n" "USER-SUPPLIED VALUES: null\n" "drbdRepoCred: drbdiocred\n" "operator:\n" " satelliteSet:\n" " kernelModuleInjectionImage: drbd.io/drbd9-rhel8:v9.0.28\n" " storagePools:\n" " lvmThinPools:\n" " - devicePaths:\n" " - /dev/vdb\n" " name: thinpool\n" " thinVolume: thinpool\n" " volumeGroup: \"\"\n" "# Save current options\n" "$ helm get values linstor-op > orig.yaml\n" "# modify values here as needed. for example selecting a newer DRBD image\n" "$ vim orig.yaml\n" "# Start the upgrade\n" "$ helm upgrade linstor-op linstor/linstor -f orig.yaml\n" #. type: Plain text msgid "" "This triggers the rollout of new pods. After a short wait, all pods should " "be running and ready. Check that no errors are listed in the status section " "of LinstorControllers, LinstorSatelliteSets and LinstorCSIDrivers." msgstr "" "これにより、新しい pod のロールアウトがトリガーされます。少し待つと、すべて" "の pod が実行され、準備が整います。LinstorControllers、LinstorSatelliteSets、" "および LinstorCSIDrivers のステータスセクションにエラーがリストされていないこ" "とを確認してください。" #. type: Plain text msgid "" "During the upgrade process, provisioning of volumes and attach/detach " "operations might not work. Existing volumes and volumes already in use by a " "pod will continue to work without interruption." msgstr "" "アップグレードプロセス中は、ボリュームのプロビジョニングとアタッチ/デタッチ操" "作が機能しない場合があります。既存のボリュームと pod ですでに使用されているボ" "リュームは、中断することなく引き続き機能します。" #. type: Title ==== #, no-wrap msgid "Upgrading a LINSTOR Cluster with Kubernetes backend" msgstr "Kubernetes バックエンドを使用した LINSTOR クラスターのアップグレード" #. type: Plain text msgid "" "Using the Kubernetes API as LINSTOR backend is quite new: there might be " "situations in which LINSTOR fails to upgrade resources, leaving the LINSTOR " "cluster in an unusable state. For this reason, we strongly recommend doing a " "manual backup of all LINSTOR resources before upgrading the cluster. In a " "future release, this step will be managed by the operator." msgstr "" "Kubernetes API を LINSTOR バックエンドとして使用するのは新しい試みです。" "LINSTOR がリソースのアップグレードに失敗し、LINSTOR クラスターが使用できない" "状態になる場合があります。このため、クラスターをアップグレードする前に、すべ" "ての LINSTOR リソースの手動バックアップを実行することを強くお勧めします。将来" "のリリースでは、このステップはオペレーターによって管理されます。" #. type: Plain text msgid "Stop the current controller:" msgstr "現在のコントローラーを停止します。" #. type: delimited block - #, no-wrap msgid "" "$ kubectl patch linstorcontroller linstor-cs '{\"spec\":{\"replicas\": 0}}'\n" "$ kubectl rollout status --watch deployment/linstor-cs-controller\n" msgstr "" "$ kubectl patch linstorcontroller linstor-cs '{\"spec\":{\"replicas\": 0}}'\n" "$ kubectl rollout status --watch deployment/linstor-cs-controller\n" #. type: Plain text msgid "" "The following command will create a file `crds.yaml`, which stores the " "current state of all LINSTOR Custom Resource Definitions:" msgstr "" "次のコマンドは、すべての LINSTOR カスタムリソース定義の現在の状態を保存する" "ファイル `crds.yaml` を作成します。" #. type: delimited block - #, no-wrap msgid "$ kubectl get crds | grep -o \".*.internal.linstor.linbit.com\" | xargs kubectl get crds -oyaml > crds.yaml\n" msgstr "$ kubectl get crds | grep -o \".*.internal.linstor.linbit.com\" | xargs kubectl get crds -oyaml > crds.yaml\n" #. type: Plain text msgid "" "In addition to the definitions, the actual resources must be be backed up as " "well:" msgstr "定義に加えて、実際のリソースもバックアップする必要があります。" #. type: delimited block - #, no-wrap msgid "$ kubectl get crds | grep -o \".*.internal.linstor.linbit.com\" | xargs -i{} sh -c \"kubectl get {} -oyaml > {}.yaml\"\n" msgstr "$ kubectl get crds | grep -o \".*.internal.linstor.linbit.com\" | xargs -i{} sh -c \"kubectl get {} -oyaml > {}.yaml\"\n" #. type: Plain text msgid "" "Run the chart upgrade using `--set IHaveBackedUpAllMyLinstorResources=true` " "to acknowledge you have executed the above steps." msgstr "" "`--set IHaveBackedUpAllMyLinstorResources=true` を使用して chart のアップグ" "レードを実行し、上記の手順を実行したことを確認します。" #. type: Title ==== #, no-wrap msgid "Upgrade instructions for specific versions" msgstr "特定のバージョンのアップグレード手順" #. type: Plain text msgid "Some versions require special steps, see below." msgstr "一部のバージョンでは特別な手順が必要です。以下を参照ください。" #. type: Title ===== #, no-wrap msgid "Upgrade to v1.7" msgstr "v1.7 へのアップグレード" #. type: Plain text msgid "No additional steps necessary." msgstr "追加の手順は必要ありません。" #. type: Title ===== #, no-wrap msgid "Upgrade to v1.6" msgstr "v1.6 へのアップグレード" #. type: Plain text msgid "" "This versions introduces a new option to support Kubernetes distributions " "which use different state directories than the default of `/var/lib/" "kubelet`. A notable example is microk8s, which uses `/var/snap/microk8s/" "common/var/lib/kubelet`. To support this, a small addition to the " "`LinstorCSIDriver` CRD was necessary. As Helm does not upgrade CRDs on chart " "upgrade, instead please run:" msgstr "" "このバージョンでは、デフォルトの `/var/lib/kubelet` とは異なる状態ディレクト" "リを使用する Kubernetes ディストリビューションをサポートするための新しいオプ" "ションが導入されています。注目すべきは `/var/snap/microk8s/common/var/lib/" "kubelet` を使用する microk8s です。これをサポートするには `LinstorCSIDriver` " "CRD に少し追加する必要がありました。Helm は chart のアップグレード時に CRD を" "アップグレードしないため、代わりに次を実行してください。" #. type: delimited block - #, no-wrap msgid "" "$ helm repo update\n" "$ helm pull linstor/linstor --untar\n" "$ kubectl replace -f linstor/crds/\n" "customresourcedefinition.apiextensions.k8s.io/linstorcontrollers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorcsidrivers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorsatellitesets.linstor.linbit.com replaced\n" msgstr "" "$ helm repo update\n" "$ helm pull linstor/linstor --untar\n" "$ kubectl replace -f linstor/crds/\n" "customresourcedefinition.apiextensions.k8s.io/linstorcontrollers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorcsidrivers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorsatellitesets.linstor.linbit.com replaced\n" #. type: Plain text msgid "" "If you do not apply the new CRDs, you will get errors like the following:" msgstr "新しい CRD を適用しないと、次のようなエラーが発生します。" #. type: delimited block - #, no-wrap msgid "Error: UPGRADE FAILED: error validating \"\": error validating data: ValidationError(LinstorCSIDriver.spec): unknown field \"kubeletPath\" in com.linbit.linstor.v1.LinstorCSIDriver.spec\n" msgstr "Error: UPGRADE FAILED: error validating \"\": error validating data: ValidationError(LinstorCSIDriver.spec): unknown field \"kubeletPath\" in com.linbit.linstor.v1.LinstorCSIDriver.spec\n" #. type: Plain text msgid "" "If you previously used the included snapshot-controller to process " "`VolumeSnapshot` resources, you should replace it with the new charts " "provided by the Piraeus project. The <> has been updated to include instructions on how you " "can add the snapshot-controller to your cluster." msgstr "" "以前に付属のスナップショットコントローラーを使用して `VolumeSnapshot` リソー" "スを処理したことがある場合は、それを Piraeus プロジェクトによって提供される新" "しい chart に置き換える必要があります。 <> が更新され、スナップショットコントローラーをクラ" "スターに追加する方法e 含まれるようになりました。" #. type: Title ===== #, no-wrap msgid "Upgrade to v1.5" msgstr "v1.5 へのアップグレード" #. type: Plain text msgid "" "This version introduces a <> component " "for DRBD resources. This requires a new image and a replacement of the " "existing `LinstorSatelliteSet` CRD. Helm does not upgrade the CRDs on a " "chart upgrade, instead please run:" msgstr "" "このバージョンでは DRBD リソースの <> コンポー" "ネントが導入されます。これには、新しいイメージと既存の `LinstorSatelliteSet` " "CRD の置き換えが必要です。 Helm は chart upgrade で CRD をアップグレードしま" "せん。代わりに、以下を実行してください。" #. type: Plain text msgid "" "If you do not plan to use the provided <> you still need to apply the above steps, otherwise you will get " "an errors like the following" msgstr "" "提供されている <> を使用する予定がない場合" "でも、上記の手順を適用する必要があります。そうしないと、次のようなエラーが発" "生します。" #. type: delimited block - #, no-wrap msgid "Error: UPGRADE FAILED: error validating \"\": error validating data: ValidationError(LinstorSatelliteSet.spec): unknown field \"monitoringImage\" in com.linbit.linstor.v1.LinstorSatelliteSet.spec\n" msgstr "Error: UPGRADE FAILED: error validating \"\": error validating data: ValidationError(LinstorSatelliteSet.spec): unknown field \"monitoringImage\" in com.linbit.linstor.v1.LinstorSatelliteSet.spec\n" #. type: Plain text msgid "" "Some Helm versions fail to set the monitoring image even after replacing the " "CRDs. In that case, the in-cluster LinstorSatelliteSet will show an empty " "`monitoringImage` value. Edit the resource using `kubectl edit " "linstorsatellitesets` and set the value to `drbd.io/drbd-reactor:v0.3.0` to " "enable monitoring." msgstr "" "一部の Helm バージョンでは、CRD を交換した後でも監視イメージを設定できませ" "ん。その場合、クラスター内の LinstorSatelliteSet は空の `monitoringImage` 値" "を表示します。 `kubectl edit linstorsatellitesets` を使用してリソースを編集" "し、値を `drbd.io/drbd-reactor:v0.3.0` に設定して、監視を有効にします。" #. type: Title ===== #, no-wrap msgid "Upgrade to v1.4" msgstr "v1.4 へのアップグレード" #. type: Plain text msgid "" "This version introduces a new default version for the Etcd image, so take " "extra care that Etcd is using persistent storage. *Upgrading the Etcd image " "without persistent storage will corrupt the cluster*." msgstr "" "このバージョンでは、Etcd イメージの新しいデフォルトバージョンが導入されている" "ため、Etcd が永続ストレージを使用していることに特に注意してください。永続スト" "レージなしで Etcd イメージをアップグレードすると、クラスターが壊れるので注意" "してください。" #. type: Plain text msgid "" "If you are upgrading an existing cluster without making use of new Helm " "options, no additional steps are necessary." msgstr "" "新しい Helm オプションを使用せずに既存のクラスターをアップグレードする場合、" "追加の手順は必要ありません。" #. type: Plain text msgid "" "If you plan to use the newly introduced `additionalProperties` and " "`additionalEnv` settings, you have to replace the installed " "CustomResourceDefinitions with newer versions. Helm does not upgrade the " "CRDs on a chart upgrade" msgstr "" "新しく導入された `additionalProperties` および `additionalEnv` 設定を使用する" "場合は、インストールされている CustomResourceDefinitions を新しいバージョンに" "置き換える必要があります。Helm は chart upgrade で CRD をアップグレードしませ" "ん。" #. type: delimited block - #, no-wrap msgid "" "$ helm pull linstor/linstor --untar\n" "$ kubectl replace -f linstor/crds/\n" "customresourcedefinition.apiextensions.k8s.io/linstorcontrollers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorcsidrivers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorsatellitesets.linstor.linbit.com replaced\n" msgstr "" "$ helm pull linstor/linstor --untar\n" "$ kubectl replace -f linstor/crds/\n" "customresourcedefinition.apiextensions.k8s.io/linstorcontrollers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorcsidrivers.linstor.linbit.com replaced\n" "customresourcedefinition.apiextensions.k8s.io/linstorsatellitesets.linstor.linbit.com replaced\n" #. type: Title ===== #, no-wrap msgid "Upgrade to v1.3" msgstr "v1.3 へのアップグレード" #. type: Title ===== #, no-wrap msgid "Upgrade to v1.2" msgstr "v1.2 へのアップグレード" #. type: Plain text msgid "" "LINSTOR operator v1.2 is supported on Kubernetes 1.17+. If you are using an " "older Kubernetes distribution, you may need to change the default settings, " "for example [the CSI provisioner](https://kubernetes-csi.github.io/docs/" "external-provisioner.html)." msgstr "" "LINSTOR オペレーター v1.2 は Kubernetes 1.17 以降でサポートされています。古" "い Kubernetes ディストリビューションを使用している場合は、デフォルト設定を変" "更する必要がある場合があります。例えば [the CSI provisioner](https://" "kubernetes-csi.github.io/docs/external-provisioner.html) です。" #. type: Plain text msgid "" "There is a known issue when updating the CSI components: the pods will not " "be updated to the newest image and the `errors` section of the " "LinstorCSIDrivers resource shows an error updating the DaemonSet. In this " "case, manually delete `deployment/linstor-op-csi-controller` and `daemonset/" "linstor-op-csi-node`. They will be re-created by the operator." msgstr "" "CSI コンポーネントの更新時に既知の問題があります。pod は最新のイメージに更新" "されず、LinstorCSIDrivers リソースの `errors` セクションに DaemonSet の更新エ" "ラーが表示されます。この場合、 `deployment/linstor-op-csi-controller` と " "`daemonset/linstor-op-csi-node` を手動で削除してください。それらはオペレー" "ターによって再作成されます。" #. type: Title ==== #, no-wrap msgid "Creating Etcd Backups" msgstr "Etcd バックアップの作成" #. type: Plain text msgid "" "To create a backup of the Etcd database and store it on your control host, " "run:" msgstr "" "Etcd データベースのバックアップを作成し、それをコントロールホストに保存するに" "は、次のコマンドを実行します。" #. type: delimited block - #, no-wrap msgid "" "kubectl exec linstor-op-etcd-0 -- etcdctl snapshot save /tmp/save.db\n" "kubectl cp linstor-op-etcd-0:/tmp/save.db save.db\n" msgstr "" "kubectl exec linstor-op-etcd-0 -- etcdctl snapshot save /tmp/save.db\n" "kubectl cp linstor-op-etcd-0:/tmp/save.db save.db\n" #. type: Plain text msgid "" "These commands will create a file `save.db` on the machine you are running " "`kubectl` from." msgstr "" "これらのコマンドは `kubectl` を実行しているマシン上にファイル `save.db` を作" "成します。"