######################################################################### # Makefile for the Doris software. # # Created by: configure # # 04-Dec-1998 # # # # Delft University of Technology # # Delft Institute of Earth Observation and Space Systems # # http://doris.tudelft.nl # # See also the user manual, annex installation. # # # ### Usage ### # # The command: "make" creates and optimized version of doris. # # The command: "make install" installs it andcleans up. # # If this does not work, try a more controlled approach by: # # # # 0. inspect set up of this Makefile # # 1. set CC DEFS LIBS etc., first set these to debug values # # (read NOTE there if problems) # # 2. compile software sources to *.o: "make swobjs" # # 3. link object together to executable: "make doris" # # 4. install executable: "make install" # # 5. remove object files: "make clean" # # # # BTW. "make" does "swobjs doris" by default. # # # ### # # Successfully tested for compilers/platforms: # # GNU g++ version 2.7.2.2 on HP-UX B.10.20 A 9000/785 # # GNU g++ version 2.95.2 on HP-UX B.10.20 A 9000/785 # # HP aCC version A.01.07 on HP-UX B.10.20 A 9000/785 # # GNU g++ version ? on Linux X86 # # SGI ? # # Sun Studion 9,10,11 on Solaris Sparc and X86/AMD64 # # GNU g++ versions v3.4, v4.0, v4.1, v4.2, v4.3 on Linux X86 and AMD64 # # Sun Sudion v11 on Linux AMD64 # # Intel Compilers v9, v10, v11 on Linux AMD64 # ######################################################################### ################################################################### ################################################################### # Please change if required: DEF[1-6], CC, CFLAGS, LIBDIR, ### ################################################################### ### The shell used by this makefile ### SHELL = /bin/sh ### Specify compiler/installation directory ### INSTALLDIR = /data/src/Doris_s1_git/bin CC = g++ SCRIPTSDIR = ../bin ### Define statements controlling compilation ### # Comment out DEF[1-8] statements when appropriate. DEF1 = -D__DEBUGMAT1 # -1- range checking in matrix class DEF2 = -D__DEBUGMAT2 # -2- info matrix class (debug only) DEF3 = -D__DEBUG # -3- debug for other files DEF4 = -Wno-deprecated # -4- do not display warnings due to depricated entries DEF5 = -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE # -5- support for large files #DEF6 = -DNO_FASTTRIG # -6- extra functional switches #DEF9 = -D__NO_IOS_BINARY__ # -9- comment out if you ios::binary (most will) # ### Do not change following 2, simply comment DEF1-8 above DEFSDEBUG = $(DEF1) $(DEF2) $(DEF3) DEFS = $(DEF4) $(DEF5) $(DEF6) -D__USE_FFTW_LIBRARY__ -D__X86PROCESSOR__ -I/usr/include ### NOTE ### # If you get warnings like the following (I got them with g++, not with aCC) # then use define __GNUC__ to define these functions #%// BK 15-Aug-2000 #In file included from matrixbk.h:38, # from processor.cc:23: #constants.h: In method `real8 cn::dist(cn) const': #constants.h:106: implicit declaration of function `int sqr(...)' ### END NOTE ### # LOCAL dir LOCAL_INSTALLDIR = ../bin ### CFLAGS ### # Compiler options flag ### # Specify compiler flags (I selected these for g++) CFLAGSDEBUG = -g -O $(DEFS) $(DEFSDEBUG) CFLAGSOPT = -O $(DEFS) #CFLAGSOPT = -O2 $(DEFS) # this crashed doris! (?) #CFLAGSOPT = -O3 $(DEFS) # this crashed doris! (?) ### CCNOTE ### ### Change here ### ### set CFLAGS depending on if you compile debug version or working version ### #CFLAGS = $(CFLAGSDEBUG) CFLAGS = $(CFLAGSOPT) ### END CCNOTE ### ### Library locations flag ### ### -lcl : used for veclib ### -lm : used for fftw LFLAGS = -L/lib64 -lfftw3f -lm ##################################################### ### No need to change anything below here... #### ##################################################### EXECUTABLE = doris SWSRCS = processor.cc \ utilities.cc \ ioroutines.cc \ readinput.cc \ readdata.cc \ coregistration.cc \ filtering.cc \ referencephase.cc \ products.cc \ geocode.cc \ unwrap.cc \ matrixspecs.cc \ exceptions.cc \ estorbit.cc SWOBJS = $(SWSRCS:.cc=.o) ### scripts of doris.tar in SCRIPTSDIR, used at make install SCRIPTS = helpdoris \ baseline.doris.sh \ baseline.doris.csh \ construct_dem.sh \ coregpm.doris \ doris* \ heightamb \ phasefilt.doris \ plotcpm* \ plotoffsets* \ run \ viewanddel \ cpx2ps \ lonlathei2ascii \ ascii2ascii_UTM \ ascii2ps* \ tsx* \ rs2* \ csk* \ gammaReadfiles.csh \ hhmmss2sec.py \ sec2hhmmss.py ##################################################### ### And no need to change anything below here... #### ##################################################### ### what to do if make w/o arguments ### # first make all object files, then link them together default: $(EXECUTABLE) ### how to compile object code .o from C++ source files .cc (general rule) ### # space between -o and filename for SUN make (BK 7 july 2000) .cc.o: $(CC) $(CFLAGS) -c -o $(@) $< ##################################################### ### Make object code from source ### swobjs: $(SWOBJS) ### Load objects to executable ### ### The added .cc files contain class definitions ### matrixclass is explicitly included ### in the source code since we had some problems finding out how to do that ### here, since compilers treat the template class differently than normal classes. ### BK 07-Feb-2002 $(EXECUTABLE): $(SWOBJS) tmp_strptime.cc slcimage.cc productinfo.cc orbitbk.cc $(CC) $(CFLAGS) -c -o triangle.o -DTRILIBRARY -DANSI_DECLARATORS triangle.c $(CC) $(CFLAGS)\ tmp_strptime.cc $(SWOBJS) triangle.o\ slcimage.cc productinfo.cc orbitbk.cc\ $(LFLAGS) -o $@ @echo " " @echo "*******************************" @echo "* ...Compilation finished... *" @echo "*******************************" @echo " " ### Install executable in installdir ### install: $(EXECUTABLE) @echo "* Installing $(EXECUTABLE) in: $(INSTALLDIR)" @cp -f $(EXECUTABLE) $(INSTALLDIR)/. ( cd $(SCRIPTSDIR); cp -f $(SCRIPTS) $(INSTALLDIR)/. ) $(MAKE) cleaner @echo " " @echo "*******************************" @echo "* ...Installation finished... *" @echo "*******************************" @echo " " @echo "* Check that $(INSTALLDIR) is in your path search: echo \$$PATH ." @echo " " installcb: $(EXECUTABLE) @echo "* Installing $(EXECUTABLE) in: $(LOCAL_INSTALLDIR)" @cp -f $(EXECUTABLE) $(LOCAL_INSTALLDIR)/. $(MAKE) cleaner @echo " " @echo "*******************************" @echo "* ...Installation finished... *" @echo "*******************************" @echo " " @echo "* Check that $(LOCAL_INSTALLDIR) is in your path search: echo \$$PATH ." @echo " " ##################################################### ### Testers ### test: testdoris testdoris: $(EXECUTABLE) @echo " " @echo "* Executing command: $(EXECUTABLE) -v" $(EXECUTABLE) -v @echo " " ### Orbit test program for debugging ### test-orbit: ioroutines.o matrixspecs.o utilities.o exceptions.cc slcimage.cc orbitbk.cc matrixbk.cc bk_messages.hh $(CC) $(CFLAGS) -D__TESTMAIN__ \ ioroutines.o matrixspecs.o utilities.o exceptions.cc slcimage.cc orbitbk.cc \ $(LFLAGS) \ -o $@ ### Matrix test program for debugging ### ### fast_sin defined in utilities.cc, which requires ioroutines, which, etc. test-matrix: matrix_test.cc matrixspecs.o utilities.o utilities.o ioroutines.o matrixbk.cc $(CC) $(CFLAGS) matrix_test.cc matrixspecs.o \ utilities.o ioroutines.o exceptions.cc orbitbk.cc \ $(LFLAGS) \ -o $@ @echo " " ##################################################### ### Cleaners ### clean: cleanswobjs cleaner: clean cleanprog cleanest: clean cleanprog uninstall cleanprog: @rm -f $(EXECUTABLE) $(EXECUTABLE.debug) \ matrixbk_test testorbit @echo "* Removed executables in current dir." cleanswobjs: @rm -f $(SWOBJS) matrixbk_test.o orbitbk.o slcimage.o triangle.o @echo "* Removed object files." uninstall: @rm -f $(INSTALLDIR)/$(EXECUTABLE) @echo "* Removed executables in install dir: $(INSTALLDIR)." ### BK 12-Dec-2000 ###