#!/bin/csh -f # plotoffsets_cc for gmt3-3 # used by Doris software for plotting of offset vectors after coarse coregistration. # plotting magnitude background may require some diskspace # (subx, suby..) # bg assumed to be in one file, size=(width*height); width=pN-p0+1 # # AO: Adapted for coarse correlation step # # Developers: # Bert Kampes # Anneleen Oyen ################ ################ ### Handle input. # give doris time to write result file sleep 1 set PRG = `basename "$0"` set VER = "v1.0, FMR software" set AUT = "TUDelft, (c) 1999-2010" echo "$PRG $VER, $AUT" echo " " ### set USAGE = "0" #synopsis set HELP = "0" #exit afterwards set IFILE = "interferogram.out" # arg 1 default # args 2:5 (default) file dimension (plot dim.) @ L0 = 1 @ LN = 25000 @ P0 = 1 @ PN = 4900 set THRESHOLD = "0.4" # arg6 default set SLCFILE = "" # arg7 optional set SLCFORMAT = "" set DOBG = "0" # default (not possible w/o l0,lN,p0,pN switch ( $#argv ) case '7': set DOBG = "1" set SLCFILE = "$7" # ||| fall through ||| # case '6': set THRESHOLD = "$6" # ||| fall through ||| # case '5': @ L0 = $2 @ LN = $3 @ P0 = $4 @ PN = $5 # ||| fall through ||| # case '2': case '1': set IFILE = $1 breaksw # --- no fall through --- # default: set HELP = "1" endsw if ( $#argv == 2) set THRESHOLD = "$2" # Check input if ( ! -r "$IFILE" ) then echo " input file: $IFILE cannot be read." set HELP = "1" endif # Check if something went wrong set MORE = more; less >& /dev/null if ( $status == 0 ) set MORE = 'less -de' echo "Using as pager program: $MORE" if ( $HELP ) set USAGE = "1" if ( $USAGE ) then #cat << __EOF_USAGE | more -d cat << __EOF_USAGE | $MORE ----------------------------------------------------------------------- $PRG -- Program to plot offset vectors from Doris Position, correlation, and background image can be plotted. SYNOPSIS: $PRG ifile [linelo hi pixlo hi [threshold [slcfile]]] ifile: Resultfile from Doris [mandatory arg] linelo: First azimuth line. [default: 1] linehi: Last azimuth line. [default: 25000] pixlo: First range pixel. [default: 1] pixhi: Last range pixel. [default: 4900] threshold: Only plot estimated with correlation above threshold. [default: 0.4] slcfile: Complex raw file. Magnitude is used as background image. (format can be complex real4 or short int.) EXAMPLE: $PRG interferogram.out 1 25000 1 4900 0.4 slcfile.raw PROG may depend on gawk or nawk and not work with std awk... ----------------------------------------------------------------------- __EOF_USAGE endif if ( $HELP ) then #cat << __EOF_HELP | more -de cat << __EOF_HELP | $MORE ifile is the interferogram result file from the Doris software, see this script for details. Somewhere the coarse coregistration output section should be present, containing lines such as: ******************************************************************* *_Start_coarse_correl: ******************************************************************* Estimated translation slave w.r.t. master: Coarse_correlation_translation_lines: -2 Coarse_correlation_translation_pixels: -4 Number of correlation windows: 21 of 21 center(l,p) coherence offsetL offsetP 0 1532 248 0.391786 -2 -3 1 1532 2805 0.381579 -2 -4 ... 20 25217 5361 0.581629 -2 -4 ******************************************************************* * End_coarse_correl:_NORMAL ******************************************************************* See also: cpxfiddle, GMT. __EOF_HELP exit -1 endif ### Initialize variables set TMPDIR = "." if ( ! -w "$TMPDIR" ) then set TMPDIR = "/tmp" endif if ( ! -w "$TMPDIR" ) then echo "Sorry, directory $TMPDIR seems not writable, exiting." exit -2 endif set PSFILE = $TMPDIR/tmpplot.ps set TMPFILE = $TMPDIR/tmpdata.plot rm -f $PSFILE $TMPFILE ### ifile is transformed to tmpfile with columns: # 1: window number # 2: location x # 3: location y # 4: offset x # 5: offset y # 6: correlation ### Create tmpfile with only data: grep fine section with awk and ### remove trailing comment lines (5) and tailing comment (2) ### ###1: *_Start_fine_coreg ###2: ******************************************************************* ###3: Oversampling factor: 16 ###4: Number_of_correlation_windows: 100 ###5: Number posL posP offsetL offsetP correlation ###6: 0 27 27 241.06 3.19 0.42 ### ... ###x: 99 4733 971 241.06 3.50 0.41 ###x+1: ###x+2: ******************************************************************* ###x+3: * End_fine_coreg:_NORMAL ###x+4: ******************************************************************* ### # ###################################################################### ### find out if nawk is available, since awk seems not to know atan2? set AWK = awk; echo 1 | /usr/xpg4/bin/awk '{print 1}' >& /dev/null if ( $status == 0 ) set AWK = '/usr/xpg4/bin/awk' echo 1 | gawk '{print 1}' >& /dev/null if ( $status == 0 ) set AWK = 'gawk' echo 1 | nawk '{print 1}' >& /dev/null if ( $status == 0 ) set AWK = 'nawk' echo "Using as awk program: $AWK" ###################################################################### ### 1. Grep between start stop pair: echo "TMPFILE BEING GENERATED: step1" $AWK '/Start_coarse_correl/, /End_coarse_correl/' $IFILE >! $TMPFILE.$$ #echo $AWK ### 2. Get number of points (starting at window 0): @ NUMPOINTS = `$AWK '/Number of correlation windows/ {print $5}' $TMPFILE.$$` #echo NUMPOINTS=$NUMPOINTS #### 3. Reduce file only to data: #tail -n +6 $TMPFILE.$$ | head -n $NUMPOINTS >! $TMPFILE #### 4. Remove above threshold (here is most easy...) #$AWK -v t=$THRESHOLD '$6>=t' $TMPFILE >! $TMPFILE.$$ #mv -f $TMPFILE.$$ $TMPFILE # #%// BK 25-Sep-2001: following bug report by Irek Baran. echo "TMPFILE BEING GENERATED: step2" #$AWK -v n=$NUMPOINTS -v t=$THRESHOLD '{if(NR>5&&NRt){print $0}}}' $TMPFILE.$$ > $TMPFILE #rm -f $TMPFILE.$$ #test how to pass arguments. failsave seems to be: #echo 111 | $AWK '{print '$t'}' #%// BK 16-Jun-2003 #$AWK '{if(NR>5&&NR<'$NUMPOINTS'+6){if ($6>'$THRESHOLD'){print $0}}}' $TMPFILE.$$ > $TMPFILE # v3.16: more info lines in resfile, skip more. $AWK '{if(NR>8&&NR<'$NUMPOINTS'+9){if ($4>'$THRESHOLD'){print $0}}}' $TMPFILE.$$ > $TMPFILE #rm -f $TMPFILE.$$ echo "TMPFILE GENERATED" ### Check if we have points ########################################## @ NP = `$AWK '{l=NR};END{print l}' $TMPFILE` echo "$NP points above coherence threshold $THRESHOLD found." if ( $NP < 1 ) then echo "exiting..." rm -f $TMPFILE exit endif ###################################################################### ### Plot: location of windows / wtests # plotted are: # - normalized observations (offsets) # - optionally background of magnitude image # - correlation as circles (legenda... o=1), thickness arrow? ###################################################################### echo "Setting GMT defaults" # PAPER_MEDIA a4+ \ gmtset MEASURE_UNIT cm \ PAPER_MEDIA a4 \ PAGE_ORIENTATION portrait \ ANOT_FONT Helvetica \ ANOT_FONT_SIZE 10p \ ANOT_OFFSET 0.2 \ BASEMAP_AXES WeSn \ LABEL_FONT Helvetica \ LABEL_FONT_SIZE 10 \ UNIX_TIME_POS -2/-2 \ D_FORMAT %lg ###################################################################### ### Labeling of axis. echo " +++ Plotting the observed offset vectors (normalized) +++" set TITLE = "Offset_vectors_(Corr_>_$THRESHOLD)" set XLABEL = "Azimuth" set YLABEL = "Range" # height=y=azimuth, assume 5*stretched @ WIDTH = ( ( $PN - $P0 ) + 1) @ HEIGHT = ( ( $LN - $L0 ) + 1) set SLCFORMAT = "cr4" if ( $DOBG ) then # filewidth should be used, but is equal... @ SIZECI2 = $WIDTH * $HEIGHT * 4 @ SIZECR4 = $WIDTH * $HEIGHT * 8 set FSIZE = `ls -l $SLCFILE | $AWK '{print $5}'` if ( $FSIZE == $SIZECI2 ) then echo " *** File format ${SLCFILE}: complex short." set SLCFORMAT = ci2 else if ( $FSIZE == $SIZECR4 ) then echo " *** File format ${SLCFILE}: complex float." set SLCFORMAT = cr4 else echo " *** Sorry, no background, file format could not be determined." set DOBG = "0" endif endif ###################################################################### # GMT options @ TICKSL = $HEIGHT / 7 @ TICKSP = $WIDTH / 7 set RANGE = "-R$P0/$PN/$L0/$LN" set GENOPT = "-P -: " set FRAME = "-B"$TICKSP":"$YLABEL":/"$TICKSL":"$XLABEL"::."$TITLE":" set XSIZE = "16" set YSIZE = "0" @ NUMPIXS = ( $WIDTH * $HEIGHT ) # size paper, largest size $XSIZE # actually should go to landscape in that case... # strict stretching ERS1/2 only... set RATIO = "5" @ HEIGHT = $HEIGHT / $RATIO if ( $HEIGHT > $WIDTH ) then set YSIZE = $XSIZE #%// Bert Kampes, 31-Mar-2005: changed to awk from bc #set XSIZE = `echo "scale=3; $WIDTH/$HEIGHT*$YSIZE" | bc -l` set XSIZE = `echo "$WIDTH $HEIGHT $YSIZE" | $AWK '{printf "%f", $1 / $2 * $3}'` else #%// Bert Kampes, 31-Mar-2005: changed to awk from bc #set YSIZE = `echo "scale=3; $HEIGHT/$WIDTH*$XSIZE" | bc -l` set YSIZE = `echo "$HEIGHT $WIDTH $XSIZE" | $AWK '{printf "%f", $1 / $2 * $3}'` endif echo " *** Size plot (x,y): $XSIZE $YSIZE" set SIZE = "-JX$XSIZE/$YSIZE" ###################################################################### ### First plot background if requested. # for now, otherwize error set GRDFILE = $$.grd set CPTFILE = $$.cpt if ( $DOBG ) then echo " *** Making background plot..." set SUBX = "1" set SUBY = "1" # try to limit tmp GRDFILE to 10MB (2.500.000 binary float pixels) if ( $NUMPIXS > 10000000 ) then # eg. 25.000 * 5.000 set SUBY = "15" # else > 10MB tmpfile set SUBX = "3" # else > 10MB tmpfile else if ( $NUMPIXS > 5000000 ) then # eg. 10.000 * 5000 set SUBY = "10" # else > 10MB tmpfile set SUBX = "2" # else > 10MB tmpfile else if ( $NUMPIXS > 1250000 ) then # eg. 1500 * 5000 set SUBY = "5" endif echo " *** Subsampling data with factors (x,y): $SUBX $SUBY" # # assume total file has to be plotted (call from Doris...) #echo \\n" Mirroring in horiz, rather do it with GMT, but how?" : -Jx/-y ! set PROG = "cpxfiddle -w$WIDTH -f$SLCFORMAT -qmag -e0.2 -ofloat -M$SUBX/$SUBY -- $SLCFILE" # correct for GMT, subsampling output = ceil ((P-p+1)/sub) # outputlines after subsampling = ceil((P-p+1)/sub) #subsampling #set NUMX = `echo "$P0 $PN $SUBX" | $AWK '{printf "%i", ($2-$1)/$3+1}'` #set NUMY = `echo "$L0 $LN $SUBY" | $AWK '{printf "%i", ($2-$1)/$3+1}'` #multilooking set NUMX = `echo "$P0 $PN $SUBX" | $AWK '{print int(($2-$1+1)/$3)}'` set NUMY = `echo "$L0 $LN $SUBY" | $AWK '{print int(($2-$1+1)/$3)}'` echo " *** Number of output pixels (x,y): $NUMX $NUMY" #set EAST = `echo "$P0+($NUMX-1)*$SUBX" | bc -l` #set NORTH = `echo "$L0+($NUMY-1)*$SUBY" | bc -l` #%// Bert Kampes, 31-Mar-2005: changed to awk from bc set EAST = `echo "$P0 $NUMX $SUBX" | $AWK '{printf "%f", $1 + ( $2 - 1 ) * $3}'` set NORTH = `echo "$L0 $NUMY $SUBY" | $AWK '{printf "%f", $1 + ( $2 - 1 ) * $3}'` set BKRANGE = "-R$P0/$EAST/$L0/$NORTH" echo " *** GMT range: $BKRANGE" set GRDFILE = $$.grd set INC = "-I$SUBX/$SUBY" set IFORMAT = "-Zf" # binary float values echo " Calling: $PROG | xyz2grd -G$GRDFILE $BKRANGE $INC $IFORMAT" $PROG | xyz2grd -G$GRDFILE $BKRANGE $INC $IFORMAT # set CPTFILE = $$.cpt set CPTNAME = gray echo " Calling: grd2cpt $GRDFILE -C$CPTNAME -Z >! $CPTFILE" grd2cpt $GRDFILE -C$CPTNAME -Z >! $CPTFILE # # lower left is O of coord. system, while upperleft for grd file -> mirror horiz. #OK.. grdimage $GRDFILE $SIZE -C$CPTFILE -P -K -T >! $PSFILE # T slow, large: grdimage $GRDFILE $SIZE -C$CPTFILE -P -K -T >! $PSFILE set BKSIZE = "-JX$XSIZE/-$YSIZE" echo " Calling: grdimage $GRDFILE $BKSIZE -C$CPTFILE -P -K >! $PSFILE" grdimage $GRDFILE $BKSIZE -C$CPTFILE -P -K >! $PSFILE # Tidy tidy tidy echo " removing grdfile, cptfile: $GRDFILE $CPTFILE" rm -f $GRDFILE rm -f $CPTFILE # Set Overlay for next if this was first, else initialize new plot system set GMTFLAGS = "-K -O -N $GENOPT $RANGE $FRAME $SIZE -U -Sc -W6/255/0/0" else set GMTFLAGS = "-K -N $GENOPT $RANGE $FRAME $SIZE -U -Sc -W6/255/0/0" endif ###################################################################### ### Plot the location circles, where correl=size. echo " +++ Plotting location circles, size (cm) is correlation +++" $AWK '{print $2, $3, $6}' $TMPFILE | psxy $GMTFLAGS >> $PSFILE # set GMTFLAGS = "-K -O -N $GENOPT $RANGE $SIZE -Sc -W6/255/0/0" echo " +++ Plotting legenda circle +++" echo "$L0 $P0 1.0" | psxy -X-1.0 -Y-1.0 $GMTFLAGS >> $PSFILE echo "$L0 $P0 0.5" | psxy -Y-0.25 $GMTFLAGS >> $PSFILE #pstext:(x, y, size, angle, fontno, justify, text) set GMTFLAGS = "-K -O -N $GENOPT $RANGE $SIZE" echo "$L0 $P0 12 0 0 CM correlation" | pstext -Y1.0 $GMTFLAGS >> $PSFILE echo "$L0 $P0 12 0 0 LM 1.0" | pstext -X0.5 -Y-0.5 $GMTFLAGS >> $PSFILE echo "$L0 $P0 12 0 0 LM 0.5" | pstext -Y-0.5 $GMTFLAGS >> $PSFILE ###################################################################### ### Plot normalized offset vectors. # -G fill # -Sv arrowwidth/headlength/headwidth [0.075c/0.3c/0.25c] set GMTFLAGS = "-N -O -K -X0.5 -Y1.25 $GENOPT $RANGE $SIZE -Sv0.04/0.25/0.125 -G0/0/255 -W2/0/0/255" # echo "START STDL computation" set MINL = `$AWK 'NR==1{m=$5}$5m{m=$5}END{print m}'<$TMPFILE` set MEANL = `$AWK '{s += $5}END{printf "%f", s/NR}'<$TMPFILE` set STDL = `$AWK '{sq += ( $5 - '$MEANL' ) * ( $5 - '$MEANL' )};END{printf "%f", sq / ( NR - 1 )}'<$TMPFILE` #set STDL = `$AWK -v m=$MEANL '{sq+=($5-m)*($5-m)};END{print sq/(NR-1)}'<$TMPFILE` # echo "START STDP computation" set MINP = `$AWK 'NR==1{m=$6}$6m{m=$6}END{print m}'<$TMPFILE` set MEANP = `$AWK '{s += $6}END{printf "%f", s / NR}'<$TMPFILE` set STDP = `$AWK '{sq += ( $6 - '$MEANP' ) * ( $6 - '$MEANP' )};END{printf "%f", sq / ( NR - 1 )}'<$TMPFILE` #set STDP = `$AWK -v m=$MEANP '{sq+=($6-m)*($6-m)};END{print sq/(NR-1)}'<$TMPFILE` echo " *** min, max, mean, std (line): $MINL $MAXL $MEANL $STDL" echo " *** min, max, mean, std (pixel): $MINP $MAXP $MEANP $STDP" ###################################################################### ### Normalize vectors by subtracting mean-2: ### plot arrows as they are, normalized by max length ? (always longest==3cm?) #no cause then offset 1000 <> 1001 is no difference while it is the same as 10<>11 # thus scale length by l-max echo " *** Normalizing offset line by subtracting: $MEANL - 1" echo " *** Normalizing offset pixel by subtracting: $MEANP - 1" # #$AWK -v wl=$MEANL -v wp=$MEANP \ # '{ \ # {l=$5-wl-1.} \ # {p=$6-wp-1.} \ echo "start psxy vector drawing" # {dir=57.3*atan2(l,p)} \ # possibly gawk or nawk define atan2, not standard awk... $AWK '{{l = $5 - '$MEANL' - 1.0 }{p = $6 - '$MEANP' - 1.0 } \ {l = l + 0.0000001} {p = p + 0.0000001} \ {dir = 57.3 * atan2(l,p)} \ {scale = 1.5} \ {len = scale * sqrt ( l * l + p * p )} \ {printf "%.1f %.1f %.1f %.1f\n", $2, $3, dir, len} \ }' \ $TMPFILE | \ psxy $GMTFLAGS >> $PSFILE echo "...finished psxy vector drawing" ### Print info on points as text (# offl offp). set GMTFLAGS = "-M -Wo -D0/2.5 -O -N -K $GENOPT $RANGE $SIZE" echo "> $LN $P0 8 0 0 LB 0.4 15 l" >! $TMPFILE.2 $AWK '{printf "@;255/0/0; @:10: %4.0i @;0/0/0; @:8: (%4.2f;%4.2f) - \n", $1,$5,$6}' $TMPFILE >> $TMPFILE.2 # Avoid overflow with head. head -n 60 $TMPFILE.2 | pstext $GMTFLAGS >> $PSFILE rm -f $TMPFILE.2 ### Add the window numbers (last overlay, no -K (close plot system)). #pstext: (x, y, size(pts), angle(ccw), fontno, justify, text) set GMTFLAGS = "-O -N -G0/0/0 $GENOPT $RANGE $SIZE" echo " Calling: pstext $GMTFLAGS >> $PSFILE" #green, 14pts, RightTop BottomLeft $AWK '{printf "%.1f %.1f 10 0 0 RT %s\n", $2, $3, $1}' $TMPFILE | pstext $GMTFLAGS >> $PSFILE # calls from Doris, cannot interactive... #%// BK 19-Jul-2000 echo " Calling: viewanddel" rm -f $TMPFILE $GRDFILE $CPTFILE viewanddel $PSFILE ### EOF