#!/bin/bash ##!/bin/ksh # processor.helpfile # simulate man like help for processor options # # History # 03/03/99 Initial version - [BK] Bert Kampes # 19/03/99 Added troff and printout # 03/11/00 Changed to /usr/bin/ksh for Linux default (?) # 07/02/02 Changed to /usr/sh for Cygwin # 15/10/11 less escape code fix [MA] # 15/10/11 Fixed some old comments [MA] # ## RCS at end of file ##### ####################### # expand tabs before formatting. # . .IP " " -2 # .TH "$bn " "1" "$line" # .ds )H $sswname # .ds ]W Release 0.0: March 1999 # select printer, default geodesy 4th floor if [ "X$PRINTER" != "X" ]; then THEPRINTER="$PRINTER" elif [ "X$LPDEST" != "X" ]; then THEPRINTER="$LPDEST" else THEPRINTER="d5simx4de" fi VERSION="3.6++" bn=`basename $0` # name of this file swname="Doris (Delft Object-oriented Radar Interferometric Software) - TU Delft" sswname="Doris" # short software name ################################################################################## BERTLINE() { echo " +---------------+-----------------------------------------------+---------- " } BERTLINES() { echo .RE 1 echo echo echo $line echo " keyword #arg default (man/opt)" echo $line } line=`BERTLINE` # function to print line lines=`BERTLINES` # function to print lines ################################################################################## MANPG() { cat << MANEOF .DA "$bn" \- find out options for processor software; print it out. Version: $VERSION - TUDelft Usage: .RS 3 .B $bn [ .ul word / .B -p ] .br .B processor -h .ul [word] .RS 3.2 .ul word start $bn with searching for .ul word. .br .B -p print this helpfile to printer: $THEPRINTER. .RS 3 press .B h for help on pager (search, mark, forward, backwards, etc.) $lines .ul General cards .TP 4 .B c 0 opt .B .br .B C .br .B comment .br .B COMMENT .br .B # .br .B // .br Any text after these keys is ignored. .TP 4 .B BEEP 1 WARNING \\ Controls level of beeping. Options are: .br .ul ERROR only beeps on error. .br .ul WARNING beeps on errors and warnings. .br .ul PROGRESS beeps on errors, warnings and progress. .br .ul ON Enables beeping, level is highest (PROGRESS). .br .ul OFF disables beeping. .TP 4 .B PREVIEW 1 OFF \\ Controls generation of SUNraster preview files (uses cpxfiddle system call). .br .ul ON Enables preview generation. SUNraster files are created after most steps where it is appropriate. This is done by writing a small shell script in the current directory, which then is executed. This script can later be executed by the user again. .br .ul XV Same as ON, but additionally calls the program xv to view the results. .br .ul OFF disables preview generation. .TP 4 .B SCREEN 1 debug \\ Controls level of output to standard out. .br .ul ERROR only error are written to stout. .br .ul WARNING errors and warnings. .br .ul PROGRESS errors, warnings and progress. .br .ul INFO errors, warnings, progress and info. .br .ul DEBUG errors, warnings, progress, info, debug. .br .ul TRACE errors, warnings, progress, info, debug, trace. tracing shows all visited functions. If you compile a debug version of doris, a lot more is traced, also in the matrix class. .TP 4 .B BATCH 0 or 1 off \\ Specifies non-interactive processing. .br If .ul ONLYPROCESS mode then always in batch. .br If (only 1) .ul PROCESS card then this card is signifiant. .br .ul ON do non-interactive processing, except when problems are signalled. .br .ul OFF do interactive processing. .TP 4 .B LISTINPUT 0 or 1 on \\ copying inputoptionsfile to logfile. .br .ul ON do copy the input file to the logfile. .br .ul OFF do not copy the input file to the logfile. .TP 4 .B OVERWRITE 0 or 1 off \\ Overwrite existing data output files if they exist. .br .ul ON overwrite. .br .ul OFF do not overwrite. .TP 4 .B ELLIPSOID 1 or 2 wgs84 Change ellipsoid. NOT OK in version $VERSION .br .ul WGS84 use wgs84. .br .ul GRS80 use grs80. .br .ul BESSEL use bessel. .br .ul a b use specified semi major/minor. .TP 4 .B MEMORY 1 250 \\ Specify available memory (integer MB). .TP 4 .B ORB_INTERP 2 POLYFIT deg \\ Interpolation method for orbits. Default polynomial fit of maximum degree (interpolation). If there are more than 6 datapoints the degree is 5 by default. Optionally with the second argument the degree can be given. Alternatively SPLINE can be used (natural cubic splines). .TP 4 .B DUMPBASELINE 2 0 0 \\ Dump the baseline parameters as INFO variables to stdout evaluated on a grid of x lines and y pixels (dimensions of current master). Also write a 2d model of degree 1 to stdout for perpendicular baseline. This is only done if the precise orbits are available. .TP 4 .B LOGFILE 1 log.out \\ Name of log output file. .TP 4 .B M_RESFILE 1 master_result.out \\ Name of result master output file. .TP 4 .B S_RESFILE 1 slave_result.out \\ Name of result slave output file. .TP 4 .B I_RESFILE 1 interferogram.out \\ Name of result interferogram output file. .TP 4 .B ONLYPROCESS 1 opt/man \\ Only process a specified step. .br A ONLYPROCESS or PROCESS card is mandatory. .ul M_READFILES Read parameters from volume, leader, data file (null file) for Master. .br .ul S_READFILES Read parameters from volume, leader and data file (null) for Slave .br .ul M_CROP Read in slc data file, write data to pixel interleaved internal format (raster). .br .ul S_CROP Read in slc data file, write data to pixel interleaved internal format (raster). .br .ul M_PORBITS Compute precise orbits with getorb for Master. .br .ul S_PORBITS Compute precise orbits with getorb for Slave. .br .ul M_FILTAZI Filter master image in azimuth direction. .br .ul S_FILTAZI Filter slave image in azimuth direction. .br .ul COARSEORB Coarse coregistration based on precise orbits. .br .ul COARSECORR Coarse coregistration based on correlation. .br .ul FINE Fine coregistration. .br .ul COREGPM Compute coregistration parameters. .br .ul RESAMPLE Interpolate slave image to master grid. .br .ul FILTRANGE Adaptive range filter master/slave (after resampling). .br .ul INTERFERO Compute complex interferogram; Subtract reference phase here or later. Optionally use oversampling. .br .ul COMPREFPHA Compute reference interferogram of mathematic body (ellipsoid), model this with a 2d polynoial. .br .ul COHERENCE Compute complex coherence image. Subtract reference phase here or later. Possible use complex interferogram. .br .ul SUBTRREFPHA Subtract reference phase computed in step COMPREFPHA from complex intereferogram. .br .ul COMPREFDEM Compute reference interferogram of DEM. for now gtopo30 only. .br .ul SUBTRREFDEM Subtract reference interferogram of DEM (step COMPREFDEM) from complex interferogram. .br .ul FILTPHASE Filter interferogram. .br .ul UNWRAP Unwrap interferogram . For now use external routines, e.g., Ghiglia/Pritt , Snaphu .br .ul DINSAR Differential interferometry (3 or 4 pass). .br .ul SLANT2H Convert to height system. .br .ul GEOCODE Put in xyz system. .TP 4 .B PROCESS 1 opt/man \\ Process the specified step, see ONLYPROCESS. .br (more than one PROCESS card may be specified). .br. (cards are overwritten by ONLYPROCESS). .TP 4 .B STOP 0 man \\ End interpretation inputoptionsfile. $lines .ul step reading files Mandatory for *_READFILES .TP 4 .B M_IN_METHOD 1 ERS \\ identifyer what is to be read ASAR, Radarsat 1/2, ERS1/2, Envisat ASAR, JERS, ALOS, Terrasar-X and Cosmoskymed. JERS and ALOS uses ERS programs. .TP 4 .B M_IN_VOL 1 man \\ Filename of volumefile master (not used for ASAR). .TP 4 .B M_IN_LEA 1 man \\ Filename of leaderfile master (not used for ASAR). .TP 4 .B M_IN_NULL 1 man \\ Filename of nullfile master (not used for ASAR). .br (may be dummy name, not actually used). .TP 4 .B M_IN_DAT 1 man \\ Filename of datafile master. .TP 4 .B S_IN_VOL 1 \\ see .ul M_IN_VOL .TP 4 .B S_IN_LEA 1 \\ see .ul M_IN_LEA .TP 4 .B S_IN_NULL 1 \\ see .ul M_IN_NULL .TP 4 .B S_IN_DAT 1 \\ see .ul M_IN_DAT $lines .ul 1 step conversion SLC format to internal format on disk Mandatory for *_CROP .TP 4 .B M_CROP_ID 1 step01 \\ Identification of this step. This card does nothing. .TP 4 .B M_CROP_IN 1 man \\ Filename of input data in slc format. .TP 4 .B M_CROP_OUT 1 man \\ Filename of output in raw format. .TP 4 .B M_DBOW 4 total image (Master database output window) .br min line, max line, min pix, max pix. .br line=1: first line. .TP 4 .B S_CROP_ID 1 see .ul 1 M_CROP_ID .TP 4 .B S_CROP_IN 1 see .ul 1 M_CROP_IN .TP 4 .B S_CROP_OUT 1 see .ul 1 M_CROP_OUT .TP 4 .B S_DBOW 4 see .ul 1 M_DBOW $lines .ul step Precise Orbits (Uses getorb DEOS). Mandatory for proces *_PORBITS .TP 4 .B M_ORBDIR 1 man \\ Name of directory for ODR precise orbit files (getorb). .TP 4 .B M_ORB_INTERVAL 1 1 Time interval between ephemerides in seconds. .TP 4 .B M_ORB_EXTRATIME 1 3 Time in seconds before first and after last line to get ephemerides. Natural splines are used to interpolate the orbits, therefor some points before and after are required for good interpolation. .TP 4 .B M_ORB_DUMP 1 0.1 Dump interpolated ephemerides to file "masterorbit.dat" with specified delta t in seconds. .TP 4 .B S_ORBDIR 1 man \\ see .ul 1 M_ORBDIR $lines .ul step azimuth filtering mandatory for proces: M_FILTAZI and S_FILTAZI .TP 4 .B AF_BLOCKSIZE 1 1024 fftlength per buffer. (power of 2, the larger the better). .TP 4 .B AF_HAMMING 1 0.75 De-weight and re-weight spectrum at new Doppler centroid freq. .TP 4 .B AF_OVERLAP 1 BLOCK/8 Overlap in azimuth direction between buffers. .TP 4 .B AF_OUT_MASTER 1 "master.afiltered" Output data file name (mph complex r4) for master. .TP 4 .B AF_OUT_SLAVE 1 "slave.afiltered" Output data file name (mph complex r4) for slave. .TP 4 .B AF_OUT_FORMAT 1 cr4 Output format either cr4 or ci2. ci2 introduces an error (?) but reduces size of file by factor 2. $lines .ul 1 coarse coregistration based on precise orbits. Mandatory for proces COARSEORB .TP 4 .B No Options for this step $lines .ul 1 coarse correlation (coregistration) Mandatory for proces COARSECORR .TP 4 .B CC_METHOD 1 MAGFFT \\ .ul 1 MAGFFT correlation in spectral domain based on fft's. .br .ul 1 MAGSPACE correlation in space domain. .TP 4 .B CC_NWIN 1 10 Number of windows for correlation .TP 4 .B CC_IN_POS 1 opt Filename with positions of windows for computation (line,pixel) at each line. If this card is specified, CC_NWIN is ignored. .TP 4 .B CC_WINSIZE 2 64 64 Number of lines pixels of correlation windows .br NOT TRUE: for MAGFFT: defaults to 1024, 1024 .TP 4 .B CC_ACC 2 40 10 Search accuracy lines pixels. .br for MAGFFT: automatically .5*WINSIZE -L/2,L/2 .TP 4 .B CC_INITOFF 2 0 0 Initial offset lines pixels. .br .ul 1 ORBIT or orbit requests to read initial offset from file (placed there by coarseorb). $lines .ul step fine coregistration Mandatory for proces FINE .TP 4 .B FC_METHOD 1 MAGFFT .ul 1 MAGFFT coherence in spectral domain with fft's of magnitude images. .ul 1 MAGSPACE coherence in space domain. .TP 4 .B FC_NWIN 1 101 Number of windows for correlation. .TP 4 .B FC_IN_POS 1 opt Filename with positions of windows for computation (line,pixel) at each line. If this card is specified, FC_NWIN is ignored. .TP 4 .B FC_WINSIZE 2 32 32 Number of lines pixels of correlation windows. .TP 4 .B FC_ACC 2 4 4 Search accuracy lines pixels. .br for ???FFT: automatically -L/2,L/2 .TP 4 .B FC_INITOFF 2 0 0 Initial offset lines pixels. .br .ul 1 COARSECORR requests to read initial offset from file (placed there by coarsecorr). .TP 4 .B FC_OSFACTOR 2 16 Oversampling factor for interpolation of correlation. $lines .ul step computation of coregistration parameters. mandatory for proces: COREGPM .TP 4 .B CPM_THRESHOLD 1 0.3 Threshold correlation for selection windows. .TP 4 .B CPM_DEGREE 1 1 Degree of model. .TP 4 .B CPM_WEIGHT 1 none Select a priori covariance matrix. .br .ul 1 NONE no weighting is applied. .br .ul 1 LINEAR correlation is used for weighting. .TP 4 .B CPM_MAXITER 1 10 Maximum number of windows to remove automatically with outlier tests. .TP 4 .B CPM_NOPLOT 0 false If present no plots are made. $lines .ul step computation of reference interferogram (flat earth correction) mandatory for proces: COMPREFPHA (f.k.a. FLATEARTH) .TP 4 .B FE_METHOD 1 porbits Method selector for computations. .br .ul 1 PORBITS use precise orbits .br .ul 1 METHOD2 use ??? .TP 4 .B FE_DEGREE 1 5 Degree of 2D-polynomial. .TP 4 .B FE_NPOINTS 1 501 Number of points for estimation of polynomial $lines .ul 1 step: resampling of slave to master grid mandatory for proces: RESAMPLE .TP 4 .B RS_METHOD 1 cc4p Method selector for computations. .br .ul 1 RECT .br .ul 1 TRI .br .ul 1 CC4P .br .ul 1 CC6P .br .ul 1 TS6P .br .ul 1 TS8P .br .ul 1 TS16P .TP 4 .B RS_OUT_FILE 1 s_resampled.raw Name of output file resampled slave. .TP 4 .B RS_OUT_FORMAT 1 cr4 Output format either cr4 or ci2. ci2 introduces an error but reduces size of file by factor 2. .TP 4 .B RS_DBOW 4 entire overlap Database output window. .br arguments: min.line max.line min.pixel max.pixel in original master system. If specified window is outside overlap master, zeros are written in the slave. .TP 4 .B RS_SHIFTAZI 1 ON Switch to shift the azimuth spectrum of the data to zero freq. before resampling, and back to its Doppler Centroid frequency after resampling. $lines .ul step range filtering of (complex) master and slave (resampled) mandatory for proces: FILTRANGE .TP 4 .B RF_METHOD 1 adaptive Method selector for rangefiltering. either adaptive or porbits. .br .TP 4 .B RF_SLOPE 1 0.0 Mean terrain slope for method porbits. .br .TP 4 .B RF_FFTLENGTH 1 64 Length of adaptive block with constant slope. Resolution in range is for ERS approximately 20 meters. Default for method orbit is 1024. .br .TP 4 .B RF_NLMEAN 1 (odd) 15 Number of lines for taking mean powerspectrum of complex interferogram to reduce noise for better peak estimation. Only for method adaptive. .br .TP 4 .B RF_HAMMING 1 0.75 Alpha of hamming function for weighting. An alpha of 1.0 yields a rectangular filter, an alpha of 0. gives more power to the low frequencies. .br .TP 4 .B RF_THRESHOLD 1 5.0 Threshold for range filtering on SNR of peak estimation. SNR is defined as fftlength*power of peak divided by the power of the other frequencies. Only for method adaptive. .br .TP 4 .B RF_OVERSAMPLE 0 or 1 ON Perform oversampling of master and slave before computing interferogram. Only for method adaptive. .br .ul ON do oversampling. .br .ul OFF do not do oversampling. .TP 4 .B RF_WEIGHTCORR 0 or 1 OFF Optionally weight the powerspectrum of complex interferogram to account for decreasing number of overlapping frequencies for higher frequencies. The (Hamming) shape of the spectrum is not acounted for. The effect of this card may be neglible. Only for method adaptive. .br .ul ON do weight. .br .ul OFF do not weight. .TP 4 .B RF_OUT_MASTER 80char master.rfilter Data output file name for filtered slave. .br .TP 4 .B RF_OUT_SLAVE 80char slave.rfilter Data output file name for filtered slave. .br .TP 4 .B RF_OUT_FORMAT 80char cr4 | ci2 Data output format either complex real4 values or casted to short integers. (for both output files) .br $lines .ul step computation of (complex) interferogram mandatory for proces: INTERFERO .TP 4 .B INT_METHOD 1 man Method selector: old or oversample. The latter is not implemented yet. .br .TP 4 .B INT_OUT_CINT 1 opt Filename of complex data output file complex interferogram. .br (This file can be viewed with dismph). .TP 4 .B INT_OUT_FE 1 opt Filename of real data output file interferogram (phase) of correction/ reference phase (flatearth correction). This is the unwrapped fase, evaluated at the points of the multilooked grid. .br If this card is present it flags to save this file. .TP 4 .B INT_OUT_INT 1 opt Filename of real data output file containing the (wrapped) phase of complex interferogram. .br If this card is present it flags to save this file. .TP 4 .B INT_MULTILOOK 2 5 1 Multilooking factors in azimuth (line) and range (pixel) direction. $lines .ul step subtraction of reference interferogram (flat earth correction) mandatory for proces: SUBTRREFPHA .TP 4 .B SRP_METHOD 1 polynomial Method selector for subtraction. Either compute ref. phase here or evaluate polynomail from step COMPREFPHA. .TP 4 .B SRP_OUT_CINT 1 cint.minrefpha.raw Output file name for complex interferogram. .TP 4 .B SRP_MULTILOOK 1 or 2 1 1 Multilook factors in azimuth and range direction. Default is equal factors. .TP 4 .B SRP_OUT_CINT 1 cint.minrefpha.raw Output file name for complex interferogram. $lines .ul step phase filtering of complex interferogram mandatory for proces: FILTPHASE .TP 4 .B PF_METHOD 1 goldstein Method selector for phase filtering (goldstein or spatialconv or spectral), .TP 4 .B PF_BLOCKSIZE 1 32 Size per block. For goldstein method. .TP 4 .B PF_ALPHA 1 0.2 Weighting factor for spectrum [0,1] <-> [no,max]. Sf = S*(A/max(A)).^PF_ALPHA Where Sf is the complex filtered spectrum, S is the complex spectrum of the interferogram, and A is the real smoothed amplitude of S. The result is the ifft2d of Sf. For goldstein method. .TP 4 .B PF_OVERLAP 1 3 Use 2*PF_OVERLAP the same data for consecutive blocks/buffers. For goldstein method. .TP 4 .B PF_KERNEL var. 3 1 1 1 KERNEL function for goldstein and spatialconv method. First specify the number of arguments, then the values. Kernel is always normalized by Doris. Default kernel for goldstein is [1 2 3 2 1], and default for spatialconv is [1 1 1]. For goldstein's method this kernel is used to smooth the amplitude of the spectrum, by which the original spectrum is weighted (by smoothamplspectrum.^alpha, see PF_ALPHA). To avoid weighting, use kernel [1]. .TP 4 .B PF_IN_KERNEL2D 1 filename File name for ascii file with 2D KERNEL function. For spatialconv and spectral method. A header line should precede the kernel, containing: height width scale, e.g., 3 3 0.1111111 1 1 1 1 1 1 1 1 1 .TP 4 .B PF_OUT_FILE 1 cint.gf.alpha output file name. For method spatialconv, default is cint.filtered. .TP 4 .B PF_IN_FILE 2 filename numlines Perform filtering on this file (complex float, mph) that has N lines. $lines .ul step computation of reference DEM (phase) mandatory for proces: COMPREFDEM Most information can be found in de .HDR file of the gtopo30 DEM. .TP 4 .B CRD_METHOD 1 gtopo30 Method selector. not used in version $VERSION. .TP 4 .B CRD_IN_DEM 1 man File name of input DEM (gtopo30 only). .TP 4 .B CRD_IN_FORMAT 1 i16 Format specifier for DEM used. Either i16, r4, or r8 for shorts, floats or doubles. .TP 4 .B CRD_IN_SIZE 2 6000 4800 Number of rows/cols of input DEM. .TP 4 .B CRD_IN_DELTA 1 or 2 0.00833333333333333333 Grid spacing of input DEM in decimal degrees. .TP 4 .B CRD_IN_UL 2 89.995833333333333 -19.995833333333333333333 WGS84 coordinates of leftupper corner. In decimal degrees, latitude longitude. .TP 4 .B CRD_IN_NODATA 1 -9999 Identifier which number to regard as Not a Number in input DEM. .TP 4 .B CRD_INCLUDE_FE 1 OFF Card to switch on to include 'flat earth' in this step. .TP 4 .B CRD_DENSE 1 4 Factor for extra dense oversampling of DEM. .TP 4 .B CRD_OUT_DEM 1 opt If specified, a short file is dumped containing cut out of input DEM. .TP 4 .B CRD_OUT_DEMI 1 opt If specified, a float file is dumped containing bicubic interpolated dem. .TP 4 .B CRD_OUT_FILE 1 refdem.raw Filename of output file containing reference DEM. $lines .ul step subtraction of reference DEM (phase) mandatory for proces: SUBTRREFDEM .TP 4 .B SRD_OUT_CINT 1 cint.minrefdem.raw Output file name for complex interferogram. $lines .ul step computation of (complex) coherence image mandatory for proces: COHERENCE .TP 4 .B COH_METHOD 1 man Method selector: old or new. The latter is not implemented yet. .br .TP 4 .B COH_OUT_CCOH 1 opt Filename of complex data output file coherence. .br If this card is present it flags to save this file. .TP 4 .B COH_OUT_COH 1 opt Filename of real data output file coherence image. .br If this card is present it flags to save this file. .TP 4 .B COH_MULTILOOK 2 10 2 Multilooking factors in azimuth (line) and range (pixel) direction. .TP 4 .B COH_WINSIZE 2 coh_multilook Windowsize for coherence computation. $lines .ul step unwrap mandatory for proces: UNWRAP .TP 4 .B UW_METHOD 1 ?? Method selector: not implemented in doris v1.2 .TP 4 .B UW_??? ??? $lines .ul 1 step differential interferometry Mandatory for DINSAR .TP 4 .B DI_OUT_FILE 1 differentialinterf.raw File name of output with differential phase (complex) .TP 4 .B DI_IN_TOPOSLAVE 1 man .TP 4 .B DI_IN_TOPOINT 1 man .TP 4 .B DI_IN_TOPOMASTER 1 same as defo .TP 4 .B DI_OUT_SCALED 1 opt $lines .ul step slant to height conversion mandatory for proces: SLANT2H .TP 4 .B S2H_METHOD 1 ambiguity Method selector: ambiguity, schwabisch or rodriguez .TP 4 .B S2H_NPOINTS 1 200 schwabisch method: Number of points to be used for estimation of 2d polynomial. .TP 4 .B S2H_DEGREE1D 1 2 schwabisch method: Degree of 1d polynomial. .br .TP 4 .B S2H_NHEIGHTS 1 s2h_degree1d+1 schwabisch method: number of heights to evaluate reference phase on. .br Overdetermined problem if Nheights > degree1d+1. .TP 4 .B S2H_DEGREE2D 1 5 schwabisch method: Degree of 2d polynomial for the coefficients of 1d polynomial. .br .TP 4 .B S2H_OUT_HEI 1 hei.raw File name of data output file with heights. .TP 4 .B S2H_OUT_PHI 1 phi.raw ambiguity method: File name of data output file with heights. .TP 4 .B S2H_OUT_LAM 1 lam.raw ambiguity method: File name of data output file with heights. $lines .ul step geocoding (interpolation to regular grid?) mandatory for proces: GEOCODE .TP 4 .B GEO_OUT_LAM 1 lambda.raw Filename of outputfile longitude. .br .TP 4 .B GEO_OUT_PHI 1 phi.raw Filename of outputfile latitude. .br .SS Files ? .SS See also rm_err_??.c .br plotscript .br expand() .br run .br checklist.tex .br less .br ? MANEOF } ################################################################################## # -b only for debugging, ... comment out #if [ "$1" = "-b" ]; then # #echo "man2ps should be invoked or something." # #printout to ps and exit # MANPG | nroff -man | more # exit 1 #fi # # Print out this helpfile with keywords if [ "$1" = "-p" ]; then MANPG | nroff -man -Tlj | lp -d$THEPRINTER -onb -od -oA4 exit 1 fi # Find out pager if [ "X$PAGER" = "X" ]; then echo "Please set environment variable PAGER. For example in csh:" echo " setenv PAGER more" PAGER="more" if [ ! "X$1" = "X" ]; then PAGER="$PAGER +/$1" fi fi if [ "$PAGER" = "less" ]; then if [ "$1" = "" ]; then PAGER="less -d -e -i -r -# .8 " else PAGER="less -d -e -i -r -p$1" fi fi #if [ ! -x `whence $PAGER` ]; then # echo "$PAGER not found or environment variable PAGER not set" # exit 1 #fi # Print to screen MANPG | nroff -man | $PAGER exit 0 # END ## RCS info ##### # $Source: /users/kampes/DEVELOP/DORIS/bin/RCS/helpdoris,v $ # $Revision: 3.10 $ # $Author: kampes $ # $Date: 2003/08/28 14:17:09 $ # $Log: helpdoris,v $ # Revision 3.10 2003/08/28 14:17:09 kampes # *** empty log message *** # # Revision 3.9 2003/08/14 08:45:58 kampes # added jers info # # Revision 3.8 2003/06/24 08:32:38 kampes # release version # # Revision 3.7 2003/06/16 07:04:51 kampes # v3.6 # # Revision 3.6 2003/04/14 07:10:29 kampes # added screen trace, m_in_method ers # # Revision 3.5 2003/04/14 06:35:15 kampes # doris release 3.5 # # Revision 1.1 2003/04/14 06:04:40 kampes # Initial revision # # Revision 1.25 2000/12/07 13:53:36 13:53:36 kampes (B.M.Kampes) # release 3 # # Revision 1.24 2000/10/24 13:46:10 13:46:10 kampes (B.M.Kampes) # doris2.6 # # Revision 1.17 2000/04/05 11:37:07 11:37:07 kampes (B.M.Kampes) # range filtering # # Revision 1.16 2000/02/16 17:44:33 17:44:33 kampes (B.M.Kampes) # new cards, refdem, check release 2.2 # # Revision 1.15 2000/02/09 11:22:29 11:22:29 kampes (B.M.Kampes) # new cards # # Revision 1.12 99/12/13 16:49:25 16:49:25 kampes (B.M.Kampes) # small # # Revision 1.10 99/12/02 11:34:43 11:34:43 kampes (B.M.Kampes) # place to space. # # Revision 1.8 99/11/02 11:41:11 11:41:11 kampes (B.M.Kampes) # doris v1.2 s2h geocoding # # Revision 1.6 99/10/06 16:14:47 16:14:47 kampes (B.M.Kampes) # proces to process # # Revision 1.5 99/09/21 09:11:31 09:11:31 kampes (B.M.Kampes) # removed cmplx to mag for fine # # Revision 1.4 99/09/15 14:56:46 14:56:46 kampes (B.M.Kampes) # deleted section geocoding etc. # # Revision 1.3 99/09/15 14:46:46 14:46:46 kampes (B.M.Kampes) # updated print option # # Revision 1.2 99/09/13 16:00:32 16:00:32 kampes (B.M.Kampes) # initial check in #