# Translation of debconf's manpage to Portuguese # Copyright (C) 2010 Free Software Foundation, Inc. # This file is distributed under the same license as the debconf package. # # Américo Monteiro , 2010 - 2019. msgid "" msgstr "" "Project-Id-Version: debconf 1.5.71\n" "POT-Creation-Date: 2024-01-21 19:23+0000\n" "PO-Revision-Date: 2019-04-19 13:19+0000\n" "Last-Translator: Américo Monteiro \n" "Language-Team: Portuguese <>\n" "Language: pt\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: ENCODINGX-Generator: Lokalize 1.0\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Lokalize 2.0\n" #. type: SH #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3 #: ../../debconf-apt-progress:3 ../../debconf-escape:3 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2 #, no-wrap msgid "NAME" msgstr "NOME" #. type: textblock #: ../../debconf:5 msgid "debconf - run a debconf-using program" msgstr "debconf - executa um programa usando debconf" #. type: SH #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7 #: ../../debconf-apt-progress:7 ../../debconf-escape:7 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7 #: debconf.conf.5:12 confmodule.3:4 #, no-wrap msgid "SYNOPSIS" msgstr "SINOPSE" #. type: verbatim #: ../../debconf:11 #, no-wrap msgid "" " debconf [options] command [args]\n" "\n" msgstr "" " debconf [opções] comando [argumentos]\n" "\n" #. type: SH #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20 #: ../../debconf-apt-progress:15 ../../debconf-escape:12 #: ../../debconf-communicate:13 ../../debconf-copydb:30 #: ../../debconf-getlang:21 ../../debconf-get-selections:11 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21 #: ../../debconf-set-selections:12 ../../debconf-show:13 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4 #, no-wrap msgid "DESCRIPTION" msgstr "DESCRIÇÃO" #. type: textblock #: ../../debconf:15 msgid "" "Debconf is a configuration system for Debian packages. For a debconf " "overview and documentation for sysadmins, see L (in the debconf-" "doc package)." msgstr "" "Debconf é um sistema de configuração para pacotes Debian. Para uma visão " "geral do debconf e documentação para administradores de sistemas, veja " "L (no pacote debconf-doc)." #. type: textblock #: ../../debconf:19 msgid "" "The B program runs a program under debconf's control, setting it up " "to talk with debconf on stdio. The program's output is expected to be " "debconf protocol commands, and it is expected to read result codes on stdin. " "See L for details about the debconf protocol." msgstr "" "O programa B executa um programa sob o controle do debconf, " "configurando-o para falar com o debconf em stdio. Espera-se que os " "resultados de saída do programa estejam em protocolo debconf, e espera-se " "ler códigos dos resultados no stdin. Veja L para detalhes " "acerca do protocolo debconf." #. type: textblock #: ../../debconf:24 msgid "" "The command to be run under debconf must be specified in a way that will let " "your PATH find it." msgstr "" "O comando a executar sob debconf tem de ser especificado de modo que permita " "que a sua PATH o encontre." #. type: textblock #: ../../debconf:27 msgid "" "This command is not the usual way that debconf is used. It's more typical " "for debconf to be used via L or L." msgstr "" "Este comando não é o modo habitual de utilização do debconf. Tipicamente, é " "mais comum usar o debconf via L ou L." #. type: =head1 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21 msgid "OPTIONS" msgstr "OPÇÕES" #. type: =item #: ../../debconf:34 msgid "B<-o>I, B<--owner=>I" msgstr "B<-o>I, B<--owner=>I" #. type: textblock #: ../../debconf:36 msgid "" "Tell debconf what package the command it is running is a part of. This is " "necessary to get ownership of registered questions right, and to support " "unregister and purge commands properly." msgstr "" "Diz ao debconf a qual pacote pertence o comando que está a executar. Isto é " "necessário para obter direitos de dono das questões registadas, e para " "suportar propriamente comandos não registados e purgados." #. type: =item #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25 msgid "B<-f>I, B<--frontend=>I" msgstr "B<-f>I, B<--frontend=>I" #. type: textblock #: ../../debconf:42 ../../dpkg-preconfigure:26 msgid "Select the frontend to use." msgstr "Selecciona o frontend a usar." #. type: =item #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36 msgid "B<-p>I, B<--priority=>I" msgstr "B<-p>I, B<--priority=>I" #. type: textblock #: ../../debconf:46 msgid "Specify the minimum priority of question that will be displayed." msgstr "Especifica a prioridade mínima da questão que vai ser mostrada." #. type: =item #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42 msgid "B<--terse>" msgstr "B<--terse>" #. type: textblock #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44 msgid "Enables terse output mode. This affects only some frontends." msgstr "Activa o modo de saída terse. Isto afecta apenas alguns frontends." #. type: =head1 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75 #: ../../debconf-set-selections:47 msgid "EXAMPLES" msgstr "EXEMPLOS" #. type: textblock #: ../../debconf:56 msgid "To debug a shell script that uses debconf, you might use:" msgstr "Para depurar um script shell que usa debconf, você pode usar:" #. type: verbatim #: ../../debconf:58 #, no-wrap msgid "" " DEBCONF_DEBUG=developer debconf my-shell-prog\n" "\n" msgstr "" " DEBCONF_DEBUG=developer debconf meu-prog-shell\n" "\n" #. type: textblock #: ../../debconf:60 msgid "Or, you might use this:" msgstr "Ou, você pode usar isto:" #. type: verbatim #: ../../debconf:62 #, no-wrap msgid "" " debconf --frontend=readline sh -x my-shell-prog\n" "\n" msgstr "" " debconf --frontend=readline sh -x meu-prog-shell\n" "\n" #. type: SH #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154 #: ../../debconf-escape:21 ../../debconf-communicate:39 #: ../../debconf-copydb:102 ../../debconf-getlang:74 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376 #: debconf-devel.7:958 #, no-wrap msgid "SEE ALSO" msgstr "VEJA TAMBÉM" #. type: textblock #: ../../debconf:66 msgid "L, L" msgstr "L, L" #. type: SH #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159 #: ../../debconf-escape:72 ../../debconf-communicate:74 #: ../../debconf-copydb:175 ../../debconf-getlang:256 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226 #: ../../debconf-show:152 ../../dpkg-preconfigure:258 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382 #: debconf-devel.7:968 #, no-wrap msgid "AUTHOR" msgstr "AUTOR" #. type: textblock #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76 #: ../../debconf-copydb:177 ../../debconf-getlang:258 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311 msgid "Joey Hess " msgstr "Joey Hess " #. type: textblock #: ../../Debconf/Client/ConfModule.pm:5 msgid "Debconf::Client::ConfModule - client module for ConfModules" msgstr "Debconf::Client::ConfModule - módulo cliente para ConfModules" #. type: verbatim #: ../../Debconf/Client/ConfModule.pm:9 #, no-wrap msgid "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Back button pressed.\n" " \t...\n" " }\n" " ...\n" "\n" msgstr "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Botão de retrocesso premido.\n" " \t...\n" " }\n" " ...\n" "\n" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:22 msgid "" "This is a module to ease writing ConfModules for Debian's configuration " "management system. It can communicate with a FrontEnd via the debconf " "protocol (which is documented in full in the debconf_specification in Debian " "policy)." msgstr "" "Isto é um módulo para facilitar a escrita de ConfModules para o sistema de " "gestão de configuração de Debian. Pode comunicar com um FrontEnd através do " "protocolo debconf (que está documentado em completo na debconf_specification " "na política Debian)." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:27 msgid "" "The design is that each command in the protocol is represented by one " "function in this module (with the name lower-cased). Call the function and " "pass in any parameters you want to follow the command. If the function is " "called in scalar context, it will return any textual return code. If it is " "called in list context, an array consisting of the numeric return code and " "the textual return code will be returned." msgstr "" "É desenhado para que cada comando no protocolo seja representado por uma " "função neste módulo (com o nome em minúsculas). Chame a função e passe " "quaisquer parâmetros que desejar seguindo o comando. Se a função for chamada " "em contexto escalar, irá devolver qualquer código de retorno. Se for chamada " "em contexto de lista, será devolvida uma matriz consistindo dos códigos de " "retorno numéricos e dos códigos de retorno textuais." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:34 msgid "" "This module uses Exporter to export all functions it defines. To import " "everything, simply import \":all\"." msgstr "" "Este módulo usa Exporter para exportar todas as funções que define. Para " "importar tudo, simplesmente importe \":all\"." #. type: =item #: ../../Debconf/Client/ConfModule.pm:62 msgid "import" msgstr "importar" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:64 msgid "" "Ensure that a FrontEnd is running. It's a little hackish. If " "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, " "one is started up automatically and stdin and out are connected to it. Note " "that this function is always run when the module is loaded in the usual way." msgstr "" "Assegura que um FrontEnd está a correr. É um desenrasque. Se " "DEBIAN_HAS_FRONTEND estiver definido, assume-se que um FrontEnd está em " "execução. Se não, é iniciado um automaticamente e o stdin e out são ligados " "a ele. Note que esta função está sempre em execução quando o módulo é " "carregado da maneira normal." #. type: =item #: ../../Debconf/Client/ConfModule.pm:95 msgid "stop" msgstr "parar" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:97 msgid "" "The frontend doesn't send a return code here, so we cannot try to read it or " "we'll block." msgstr "" "Aqui o frontend não envia um código de retorno, portanto não podemos tentar " "lê-lo ou vamos bloquear." #. type: =item #: ../../Debconf/Client/ConfModule.pm:107 msgid "AUTOLOAD" msgstr "AUTOCARGA" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:109 msgid "Creates handler functions for commands on the fly." msgstr "Cria na hora funções de manipulação para comandos." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:156 msgid "" "The debconf specification (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." msgstr "" "A especificação debconf (/usr/share/doc/debian-policy/debconf_specification." "txt.gz)." #. type: textblock #: ../../debconf-apt-progress:5 msgid "" "debconf-apt-progress - install packages using debconf to display a progress " "bar" msgstr "" "debconf-apt-progress - instala pacotes usando o debconf para mostrar uma " "barra de progresso" #. type: verbatim #: ../../debconf-apt-progress:9 #, no-wrap msgid "" " debconf-apt-progress [--] command [args ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n" " debconf-apt-progress --stop\n" "\n" msgstr "" " debconf-apt-progress [--] comando [argumentos ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] comando [argumentos ...]\n" " debconf-apt-progress --stop\n" "\n" #. type: textblock #: ../../debconf-apt-progress:17 msgid "" "B installs packages using debconf to display a " "progress bar. The given I should be any command-line apt frontend; " "specifically, it must send progress information to the file descriptor " "selected by the C configuration option, and must keep the " "file descriptors nominated by the C configuration option open " "when invoking debconf (directly or indirectly), as those file descriptors " "will be used for the debconf passthrough protocol." msgstr "" "B instala pacotes usando o debconf para mostrar uma " "barra de progresso. O I fornecido deve ser qualquer frontend do apt " "de linha de comandos; especificamente, deve enviar informação do processo " "para o descritor de ficheiro seleccionado pela opção de configuração C, e deve manter os descritores de ficheiro nomeados pela opção de " "configuração C abertos quando invoca o debconf (directamente " "ou indirectamente), porque esses descritores de ficheiro irão ser usados " "para o protocolo de passagem do debconf." #. type: textblock #: ../../debconf-apt-progress:25 msgid "" "The arguments to the command you supply should generally include B<-y> (for " "B or B) or similar to avoid the apt frontend prompting " "for input. B cannot do this itself because the " "appropriate argument may differ between apt frontends." msgstr "" "Os argumentos para o comando que você forneça devem geralmente incluir B<-y> " "(para o B ou B) ou semelhante para evitar que o frontend " "do apt pare a aguardar entradas. B não pode fazer " "isto por si próprio porque o argumento apropriado pode diferir entre " "frontends do apt." #. type: textblock #: ../../debconf-apt-progress:30 msgid "" "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to " "create a progress bar with multiple segments for different stages of " "installation, provided that the caller is a debconf confmodule. The caller " "may also interact with the progress bar itself using the debconf protocol if " "it so desires." msgstr "" "As opções B<--start>, B<--stop>, B<--from>, e B<--to> podem ser usadas para " "criar uma barra de progresso com múltiplos segmentos para os diferentes " "estágios de instalação, desde de que quem chama seja um confmodule debconf. " "O chamador também pode interagir com a barra de progresso usando o protocolo " "debconf se o desejar." #. type: textblock #: ../../debconf-apt-progress:36 msgid "" "debconf locks its config database when it starts up, which makes it " "unfortunately inconvenient to have one instance of debconf displaying the " "progress bar and another passing through questions from packages being " "installed. If you're using a multiple-segment progress bar, you'll need to " "eval the output of the B<--config> option before starting the debconf " "frontend to work around this. See L below." msgstr "" "O debconf tranca a sua base de dados de configuração quando arranca, o que " "infelizmente torna inconveniente ter uma instância do debconf a mostrar a " "barra de progresso e outra a passar as perguntas do pacote que está a ser " "instalado. Se você está a usar uma barra de progresso de múltiplos " "segmentos, você tem que avaliar a saída da opção B<--config> antes de " "arrancar o frontend do debconf para contornar isto. Veja L em baixo." #. type: =item #: ../../debconf-apt-progress:47 msgid "B<--config>" msgstr "B<--config>" #. type: textblock #: ../../debconf-apt-progress:49 msgid "" "Print environment variables necessary to start up a progress bar frontend." msgstr "" "Escreve as variáveis de ambiente necessárias para iniciar um frontend de " "barra de progresso." #. type: =item #: ../../debconf-apt-progress:51 msgid "B<--start>" msgstr "B<--start>" #. type: textblock #: ../../debconf-apt-progress:53 msgid "" "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and " "B<--to> to use other endpoints." msgstr "" "Inicia uma barra de progresso, correndo por predefinição de 0 a 100. Use B<--" "from> and B<--to> para usar outros pontos de finalização." #. type: =item #: ../../debconf-apt-progress:56 msgid "B<--from> I" msgstr "B<--from> I" #. type: textblock #: ../../debconf-apt-progress:58 msgid "" "If used with B<--start>, make the progress bar begin at I rather " "than 0." msgstr "" "Se usado com B<--start>, faz com que a barra de progresso comece em " "I em vez de 0." #. type: textblock #: ../../debconf-apt-progress:61 msgid "" "Otherwise, install packages with their progress bar beginning at this " "\"waypoint\". Must be used with B<--to>." msgstr "" "Caso contrário, instala os pacotes com a sua barra de progresso começando " "neste \"waypoint\". Tem de ser usado com B<--to>." #. type: =item #: ../../debconf-apt-progress:64 msgid "B<--to> I" msgstr "B<--to> I" #. type: textblock #: ../../debconf-apt-progress:66 msgid "" "If used with B<--start>, make the progress bar end at I rather " "than 100." msgstr "" "Se usado com B<--start>, faz com que a barra de progresso terminar em " "I em vez de 100." #. type: textblock #: ../../debconf-apt-progress:69 msgid "" "Otherwise, install packages with their progress bar ending at this " "\"waypoint\". Must be used with B<--from>." msgstr "" "Caso contrário, instala os pacotes com a sua barra de progresso terminando " "neste \"waypoint\". Tem de ser usado com B<--from>." #. type: =item #: ../../debconf-apt-progress:72 msgid "B<--stop>" msgstr "B<--stop>" #. type: textblock #: ../../debconf-apt-progress:74 msgid "Stop a running progress bar." msgstr "Pára uma barra de progresso em execução." #. type: =item #: ../../debconf-apt-progress:76 msgid "B<--no-progress>" msgstr "B<--no-progress>" #. type: textblock #: ../../debconf-apt-progress:78 msgid "" "Avoid starting, stopping, or stepping the progress bar. Progress messages " "from apt, media change events, and debconf questions will still be passed " "through to debconf." msgstr "" "Evita o arranque, paragem e passos da barra de progressos. As mensagens de " "progresso do apt, eventos de alteração de media, e perguntas do debconf " "serão mesmo assim passadas através do debconf." #. type: =item #: ../../debconf-apt-progress:82 msgid "B<--dlwaypoint> I" msgstr "B<--dlwaypoint> I" #. type: textblock #: ../../debconf-apt-progress:84 msgid "" "Specify what percent of the progress bar to use for downloading packages. " "The remainder will be used for installing packages. The default is to use " "15% for downloading and the remaining 85% for installing." msgstr "" "Especifica qual a percentagem da barra de progresso é usada para download de " "pacotes. O restante será usado para a instalação dos pacotes. A predefinição " "que se usa é 15% para o download e os restantes 85% para a instalação." #. type: =item #: ../../debconf-apt-progress:88 msgid "B<--logfile> I" msgstr "B<--logfile> I" #. type: textblock #: ../../debconf-apt-progress:90 msgid "Send the normal output from apt to the given file." msgstr "Envia a saída normal do apt para o ficheiro fornecido." #. type: =item #: ../../debconf-apt-progress:92 msgid "B<--logstderr>" msgstr "B<--logstderr>" #. type: textblock #: ../../debconf-apt-progress:94 msgid "" "Send the normal output from apt to stderr. If you supply neither B<--" "logfile> nor B<--logstderr>, the normal output from apt will be discarded." msgstr "" "Envia a saída normal do apt para o stderr. Se você não fornecer nem B<--" "logfile> nem B<--logstderr>, a saída normal do apt será descartada." #. type: =item #: ../../debconf-apt-progress:98 msgid "B<-->" msgstr "B<-->" #. type: textblock #: ../../debconf-apt-progress:100 msgid "" "Terminate options. Since you will normally need to give at least the B<-y> " "argument to the command being run, you will usually need to use B<--> to " "prevent that being interpreted as an option to B " "itself." msgstr "" "Termina as opções. Como você normalmente precisa de fornecer pelo menos o " "argumento B<-y> ao comando que está a ser executado, normalmente irá " "precisar de usar B<--> para prevenir que isso seja interpretado como uma " "opção para o próprio B." #. type: textblock #: ../../debconf-apt-progress:109 msgid "" "Install the GNOME desktop and an X window system development environment " "within a progress bar:" msgstr "" "Instala o ambiente de trabalho GNOME e um ambiente de desenvolvimento do " "sistema de janelas X dentro duma barra de progresso:" #. type: verbatim #: ../../debconf-apt-progress:112 #, no-wrap msgid "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" msgstr "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" #. type: textblock #: ../../debconf-apt-progress:114 msgid "" "Install the GNOME, KDE, and XFCE desktops within a single progress bar, " "allocating 45% of the progress bar for each of GNOME and KDE and the " "remaining 10% for XFCE:" msgstr "" "Instala os ambientes GNOME, KDE e XFCE dentro duma única barra de progresso, " "alocando 45% da barra de progresso para cada GNOME e KDE e os restantes 10% " "para o XFCE:" #. type: verbatim #: ../../debconf-apt-progress:118 #, no-wrap msgid "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" msgstr "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" #. type: =head1 #: ../../debconf-apt-progress:135 msgid "RETURN CODE" msgstr "CÓDIGO DE RETORNO" #. type: textblock #: ../../debconf-apt-progress:137 msgid "" "The exit code of the specified command is returned, unless the user hit the " "cancel button on the progress bar. If the cancel button was hit, a value of " "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 " "will be returned." msgstr "" "O código de saída do comando especificado é devolvido, a menos que o " "utilizador carregue no botão 'cancelar' na barra de progresso. Se o botão' " "cancelar' for carregado, é devolvido um valor de 30. Para evitar " "ambiguidade, se o comando devolver 30, é devolvido um valor de 3." #. type: =head1 #: ../../debconf-apt-progress:654 msgid "AUTHORS" msgstr "AUTORES" #. type: textblock #: ../../debconf-apt-progress:656 ../../debconf-escape:74 msgid "Colin Watson " msgstr "Colin Watson " #. type: textblock #: ../../debconf-escape:5 msgid "debconf-escape - helper when working with debconf's escape capability" msgstr "" "debconf-escape - ajuda quando se trabalha com a capacidade de escape do " "debconf" #. type: verbatim #: ../../debconf-escape:9 #, no-wrap msgid "" " debconf-escape -e < unescaped-text\n" " debconf-escape -u < escaped-text\n" "\n" msgstr "" " debconf-escape -e < unescaped-text\n" " debconf-escape -u < escaped-text\n" "\n" #. type: textblock #: ../../debconf-escape:14 msgid "" "When debconf has the 'escape' capability set, it will expect commands you " "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> " "respectively) and will in turn escape backslashes and newlines in its " "replies. This can be used, for example, to substitute multi-line strings " "into templates, or to get multi-line extended descriptions reliably using " "C." msgstr "" "Quando o debconf tem a capacidade 'escape' definida, irá esperar que os " "comandos que você envie tenham barras invertidas escapes de novas linhas " "(como C<\\\\> e C<\\n> respectivamente) e irá dobrar as barras invertidas e " "novas linhas nas suas respostas. Isto pode ser usado, por exemplo, para " "substituir strings de múltiplas linhas em templates, ou para obter " "descrições extensivas de múltiplas linhas com segurança usando C." #. type: textblock #: ../../debconf-escape:23 msgid "L (available in the debconf-doc package)" msgstr "L (disponível no pacote debconf-doc)" #. type: textblock #: ../../debconf-communicate:5 msgid "debconf-communicate - communicate with debconf" msgstr "debconf-communicate - comunicar com o debconf" #. type: verbatim #: ../../debconf-communicate:11 #, no-wrap msgid "" " echo commands | debconf-communicate [options] [package]\n" "\n" msgstr "" " echo comandos | debconf-communicate [opções] [pacote]\n" "\n" #. type: textblock #: ../../debconf-communicate:15 msgid "" "B allows you to communicate with debconf on the fly, " "from the command line. The package argument is the name of the package which " "you are pretending to be as you communicate with debconf, and it may be " "omitted if you are lazy. It reads commands in the form used by the debconf " "protocol from stdin. For documentation on the available commands and their " "usage, see the debconf specification." msgstr "" "B permite-lhe comunicar com o debconf na hora, a partir " "da linha de comandos. O argumento package é o nome do pacote o qual você " "finge ser quando comunica com o debconf, e pode ser omitido se você for " "preguiçoso. Lê comandos no formato usado pelo protocolo debconf a partir do " "stdin. Para documentação sobre os comandos disponíveis e a sua utilização, " "veja a especificação debconf." #. type: textblock #: ../../debconf-communicate:22 msgid "" "The commands are executed in sequence. The textual return code of each is " "printed out to standard output." msgstr "" "Os comandos são executados em sequência. O código de retorno textual de cada " "é escrito na saída standard." #. type: textblock #: ../../debconf-communicate:25 msgid "" "The return value of this program is the numeric return code of the last " "executed command." msgstr "" "O valor devolvido deste programa é o código de retorno numérico do último " "comando executado." #. type: SH #: ../../debconf-communicate:28 debconf.conf.5:444 #, no-wrap msgid "EXAMPLE" msgstr "EXEMPLO" #. type: verbatim #: ../../debconf-communicate:30 #, no-wrap msgid "" " echo get debconf/frontend | debconf-communicate\n" "\n" msgstr "" " echo get debconf/frontend | debconf-communicate\n" "\n" #. type: textblock #: ../../debconf-communicate:32 msgid "Print out the value of the debconf/frontend question." msgstr "Escreve o valor da questão debconf/frontend." #. type: =head1 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25 #: ../../debconf-set-selections:20 msgid "WARNING" msgstr "AVISO" #. type: textblock #: ../../debconf-communicate:36 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging." msgstr "" "Este programa nunca deve ser usado a partir dum script de responsável de um " "pacote que use debconf! Pode, no entanto, ser útil em depuração." #. type: textblock #: ../../debconf-communicate:41 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-copydb:5 msgid "debconf-copydb - copy a debconf database" msgstr "debconf-copydb - copia uma base de dados de debconf" #. type: verbatim #: ../../debconf-copydb:19 #, no-wrap msgid "" " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n" "\n" msgstr "" " debconf-copydb sourcedb destdb [--pattern=padrão] [--owner-pattern=padrão] [--config=Foo:bar]\n" "\n" #. type: textblock #: ../../debconf-copydb:32 msgid "" "B copies items from an existing debconf database into " "another, possibly new database. The two databases may have different " "formats; if so a conversion will automatically be done." msgstr "" "B copia itens de uma base de dados debconf existente para " "outra base de dados, que possivelmente é nova. As duas bases de dados podem " "ter formatos diferentes; se sim, será automaticamente feita uma conversão." #. type: =item #: ../../debconf-copydb:40 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:42 msgid "" "The name of the source database. Typically it will be defined in your " "debconf.conf (or .debconfrc) file." msgstr "" "O nome da base de dados fonte. Tipicamente será definido no seu ficheiro " "debconf.conf (ou .debconfrc)." #. type: =item #: ../../debconf-copydb:45 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:47 msgid "" "The name of the destination database. It may be defined in debconf.conf or ." "debconfrc, or you might define it on the command line (see below)." msgstr "" "O nome da base de dados de destino. Pode ser definido em debconf.conf ou ." "debconfrc, ou você pode defini-lo an linha de comandos (veja em baixo)." #. type: =item #: ../../debconf-copydb:51 msgid "B<-p> I, B<--pattern> I" msgstr "B<-p> I, B<--pattern> I" #. type: textblock #: ../../debconf-copydb:53 msgid "" "If this is specified, only items in I whose names match the " "pattern will be copied." msgstr "" "Se isto for especificado, apenas serão copiados os itens em I " "cujos nomes coincidam com o padrão." #. type: =item #: ../../debconf-copydb:56 msgid "B<--owner-pattern> I" msgstr "B<--owner-pattern> I" #. type: textblock #: ../../debconf-copydb:58 msgid "" "If this is specified, only items in I whose owners match the " "pattern will be copied." msgstr "" "Se isto for especificado, apenas serão copiados os itens em I " "cujos donos coincidam com o padrão." #. type: =item #: ../../debconf-copydb:61 msgid "B<-c> I, B<--config> I" msgstr "B<-c> I, B<--config> I" #. type: textblock #: ../../debconf-copydb:63 msgid "Set option Foo to bar. This is similar to writing:" msgstr "Define a opção Foo para bar. Isto é semelhante a escrever:" #. type: verbatim #: ../../debconf-copydb:65 #, no-wrap msgid "" " Foo: bar\n" "\n" msgstr "" " Foo: bar\n" "\n" #. type: textblock #: ../../debconf-copydb:67 msgid "" "In debconf.conf, except you probably want to leave off the space on the " "command line (or quote it: \"Foo: bar\"). Generally must be used multiple " "times, to build up a full configuration stanza. While blank lines are used " "to separate stanzas in debconf.conf, this program will assume that \"Name:" "dbname\" denotes the beginning of a new stanza." msgstr "" "Em debconf.conf, excepto que você provavelmente vai querer deixar o espaço " "na linha de comandos (ou citá-lo \"Foo: bar\"). Geralmente tem de ser usado " "várias vezes, para construir uma estrofe de configuração completa. Enquanto " "as linhas vazias são usadas para separar as estrofes em debconf.conf, este " "programa irá assumir que \"Name:dbname\" denota o inicio de de uma nova " "estrofe." #. type: verbatim #: ../../debconf-copydb:77 #, no-wrap msgid "" " debconf-copydb configdb backup\n" "\n" msgstr "" " debconf-copydb configdb backup\n" "\n" #. type: textblock #: ../../debconf-copydb:79 msgid "" "Copy all of configdb to backup, assuming you already have the backup " "database defined in debconf.conf." msgstr "" "Copia tudo do configdb para o backup, assumindo que você já tem a base de " "dados de backup definida em debconf.conf." #. type: verbatim #: ../../debconf-copydb:82 #, no-wrap msgid "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" msgstr "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" #. type: textblock #: ../../debconf-copydb:86 msgid "" "Copy slrn's data out of configdb, and into newdb. newdb is not defined in " "the rc file, so the --config switches set up the database on the fly." msgstr "" "Copia dados do slrn fora do configdb, e para newdb. newdb não é definido no " "ficheiro rc, portanto os switches --config definem a base de dados na hora." #. type: verbatim #: ../../debconf-copydb:89 #, no-wrap msgid "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" msgstr "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" #. type: textblock #: ../../debconf-copydb:92 msgid "Spit out all the items in the debconf database related to package foo." msgstr "" "Cospe todos os itens na base de dados do debconf relacionados com o pacote " "foo." #. type: verbatim #: ../../debconf-copydb:94 #, no-wrap msgid "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" msgstr "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" #. type: textblock #: ../../debconf-copydb:99 msgid "" "This uses the special purpose pipe driver to copy a database to a remote " "system." msgstr "" "Isto usa uma driver pipe de objectivo especial para copiar a base de dados " "para um sistema remoto." #. type: textblock #: ../../debconf-copydb:104 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-getlang:5 msgid "debconf-getlang - extract a language from a templates file" msgstr "" "debconf-getlang - extrai uma linguagem a partir de um ficheiro de templates" #. type: verbatim #: ../../debconf-getlang:18 #, no-wrap msgid "" " debconf-getlang lang master [translation]\n" " debconf-getlang --stats master translation [...]\n" "\n" msgstr "" " debconf-getlang lang master [translation]\n" " debconf-getlang --stats master translation [...]\n" "\n" #. type: textblock #: ../../debconf-getlang:23 msgid "" "Note: This utility is deprecated; you should switch to using the po-debconf " "package." msgstr "" "Nota: Este utilitário está obsoleto; você deve passar a usar o pacote po-" "debconf." #. type: textblock #: ../../debconf-getlang:25 msgid "" "This program helps make and manage translations of debconf templates. There " "are basically three situations in which this program might be called:" msgstr "" "Este programa ajuda a criar e a gerir traduções de templates debconf. " "Basicamente existem três situações nas quais este programa pode ser chamado:" #. type: =item #: ../../debconf-getlang:30 msgid "A translation is just being started." msgstr "Uma tradução foi agora iniciada." #. type: textblock #: ../../debconf-getlang:32 msgid "" "You want to provide the translator with a file they can work on that has the " "English fields from your templates file, plus blank Field-ll fields for the " "target language that they can fill in." msgstr "" "Você quer fornecer aos tradutores um ficheiro que eles possam trabalhar que " "tem os campos em Inglês do ficheiro templates, mais campos Field-ll vazios " "para a linguagem de destino que eles vão preencher." #. type: textblock #: ../../debconf-getlang:36 msgid "" "To do this, run the program with first parameter being the code for the " "language that is being translated to, and the second parameter being the " "filename of the English templates file." msgstr "" "Para fazer isto, execute o programa com o primeiro parâmetro a ser o código " "da linguagem para a qual se está a traduzir, e o segundo parâmetro sendo o " "nome do ficheiro do ficheiro de templates em Inglês." #. type: =item #: ../../debconf-getlang:40 msgid "A translation is well under way." msgstr "Uma tradução está em curso." #. type: textblock #: ../../debconf-getlang:42 msgid "" "You have changed some English text, or added more items to your templates " "file, and you want to send the translators a file with the English text plus " "their current translations (or you are the translator, and you want to " "generate such a file for your own use)." msgstr "" "Você alterou algum texto em Inglês, ou adicionou mais itens ao seu ficheiro " "templates, e quer enviar aos tradutores um ficheiro com o texto em Inglês " "mais as suas traduções actuais (ou você é o tradutor e quer gerar tal " "ficheiro para seu próprio uso)." #. type: textblock #: ../../debconf-getlang:47 msgid "" "To accomplish this, run the program with the first parameter being the the " "code for the language that is being translated to, the second parameter " "being the filename of the master English templates file, and the third " "parameter being the filename of the current translated file." msgstr "" "Para fazer isto, execute o programa com o primeiro parâmetro a ser o código " "da linguagem para a qual se está a traduzir, o segundo parâmetro sendo o " "nome do ficheiro do ficheiro de templates mestre em Inglês, e o terceiro " "parâmetro sendo o nome do ficheiro traduzido actual." #. type: textblock #: ../../debconf-getlang:52 msgid "" "When run this way, the program is smart enough to notice fuzzy translations. " "For example a fuzzy Description will be output as Description--fuzzy, " "and a new, blank Description- will be added. Translators should " "remove the -fuzzy fields as they correct the fuzzy translations." msgstr "" "Quando corre deste modo, o programa é suficientemente inteligente para " "detectar traduções fuzzy (aproximadas). Por exemplo, uma descrição fuzzy " "será mostrada como Description--fuzzy, e será adicionado uma nova " "Description- em branco. Os tradutores devem remover os campos -fuzzy e " "corrigir as traduções marcadas com fuzzy." #. type: =item #: ../../debconf-getlang:58 msgid "Checking the status of a translation" msgstr "A verificar o estado duma tradução" #. type: textblock #: ../../debconf-getlang:60 msgid "" "To check the status of a translation, use the --status flag, and pass the " "english template file as the first parameter, and all the other translated " "templates after that. It will output statistics for each of them. For " "example:" msgstr "" "Para verificar o estado duma tradução, use a bandeira --status, e passe o " "ficheiro template Inglês como o primeiro parâmetro, e todos os outros " "templates traduzidos depois disso. Irá gerar estatísticas para cada um " "deles. Por exemplo:" #. type: verbatim #: ../../debconf-getlang:65 #, no-wrap msgid "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" msgstr "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" #. type: =head1 #: ../../debconf-getlang:69 msgid "NOTE" msgstr "NOTA" #. type: textblock #: ../../debconf-getlang:71 msgid "" "Note that the text in the generated templates may be word-wrapped by debconf." msgstr "" "Note que o texto nos templates gerados pode ter as linhas arrumadas " "relativamente a palavras pelo debconf." #. type: textblock #: ../../debconf-getlang:76 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-get-selections:5 msgid "debconf-get-selections - output contents of debconf database" msgstr "" "debconf-get-selections - escreve o conteúdo da base de dados do debconf" #. type: textblock #: ../../debconf-get-selections:9 msgid "debconf-get-selections [--installer]" msgstr "debconf-get-selections [--installer]" #. type: textblock #: ../../debconf-get-selections:13 msgid "" "Output the current debconf database in a format understandable by debconf-" "set-selections." msgstr "" "Gera a base de dados debconf actual num formato compreensível por debconf-" "set-selections." #. type: textblock #: ../../debconf-get-selections:16 msgid "" "To dump the debconf database of the debian-installer, from /var/log/" "installer/cdebconf, use the --installer parameter." msgstr "" "Para abandonar a base de dados debconf do debian-installer a partir de /var/" "log/installer/cdebconf, use o parâmetro --installer." #. type: textblock #: ../../debconf-get-selections:80 ../../debconf-set-selections:228 msgid "Petter Reinholdtsen " msgstr "Petter Reinholdtsen " #. type: textblock #: ../../debconf-loadtemplate:5 msgid "debconf-loadtemplate - load template file into debconf database" msgstr "" "debconf-loadtemplate - carrega ficheiro template na base de dados do debconf" #. type: verbatim #: ../../debconf-loadtemplate:16 #, no-wrap msgid "" " debconf-loadtemplate owner file [file ..]\n" "\n" msgstr "" " debconf-loadtemplate dono ficheiro [ficheiro ..]\n" "\n" #. type: textblock #: ../../debconf-loadtemplate:20 msgid "" "Loads one or more template files into the debconf database. The first " "parameter specifies the owner of the templates (typically, the owner is the " "name of a debian package). The remaining parameters are template files to " "load." msgstr "" "Carrega um ou mais ficheiros templates na base de dados debconf. O primeiro " "parâmetro especifica o dono dos templates (tipicamente, o dono é nome do " "pacote debian). Os parâmetros restantes são ficheiros template para carregar." #. type: textblock #: ../../debconf-loadtemplate:27 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging, or to seed the debconf " "database." msgstr "" "Este programa nunca deve ser usado a partir dum script de responsável de um " "pacote que use debconf! Pode, no entanto, ser útil em depuração, ou para " "semear a base de dados debconf." #. type: textblock #: ../../debconf-loadtemplate:33 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-mergetemplate:5 msgid "debconf-mergetemplate - merge together multiple debconf template files" msgstr "debconf-mergetemplate - junta múltiplos ficheiros template de debconf" #. type: verbatim #: ../../debconf-mergetemplate:19 #, no-wrap msgid "" " debconf-mergetemplate [options] [templates.ll ...] templates\n" "\n" msgstr "" " debconf-mergetemplate [opções] [templates.ll ...] templates\n" "\n" #. type: textblock #: ../../debconf-mergetemplate:23 msgid "" "Note: This utility is deprecated. You should switch to using po-debconf's " "po2debconf program." msgstr "" "Nota: Este utilitário está obsoleto. Você deve passar a usar o programa " "po2debconf do po-debconf." #. type: textblock #: ../../debconf-mergetemplate:26 msgid "" "This program is useful if you have multiple debconf templates files which " "you want to merge together into one big file. All the specified files will " "be read in, merged, and output to standard output." msgstr "" "Este programa é útil se tiver múltiplos ficheiros templates de debconf que " "quer juntar todos num ficheiro grande. Todos os ficheiros especificados " "serão lidos, juntos, e enviados para a saída standard." #. type: textblock #: ../../debconf-mergetemplate:30 msgid "" "This can be especially useful if you are dealing with translated template " "files. In this case, you might have your main template file, plus several " "other files provided by the translators. These files will have translated " "fields in them, and maybe the translators left in the english versions of " "the fields they translated, for their reference." msgstr "" "Isto pode ser especialmente útil se você está a lidar com ficheiros template " "traduzidos. Neste caso, você pode ter o seu ficheiro template principal, " "mais outros vários ficheiros disponibilizados por tradutores. Estes " "ficheiros irão ter campos traduzidos neles, e talvez os tradutores tenham " "deixado as versões em Inglês dos campos que traduziram, para sua referência." #. type: textblock #: ../../debconf-mergetemplate:36 msgid "" "So, you want to merge together all the translated templates files with your " "main templates file. Any fields that are unique to the translated files need " "to be added in to the correct templates, but any fields they have in common " "should be superseded by the fields in the main file (which might be more up-" "to-date)." msgstr "" "Portanto, você deseja juntar todos os ficheiros templates traduzidos no seu " "ficheiro templates principal. Quaisquer campos que apenas existam nos " "ficheiros traduzidos precisam ser adicionados aos templates correctos, mas " "quaisquer campos que eles tenham em comum deve ser substituídos pelos campos " "do ficheiro principal (que os quais pode estar mais actualizados)." #. type: textblock #: ../../debconf-mergetemplate:42 msgid "" "This program handles that case properly, just list each of the translated " "templates files, and then your main templates file last." msgstr "" "Este programa lida com esse caso apropriadamente, apenas liste cada ficheiro " "template traduzido, e depois o seu ficheiro template principal no fim." #. type: =item #: ../../debconf-mergetemplate:49 msgid "--outdated" msgstr "--outdated" #. type: textblock #: ../../debconf-mergetemplate:51 msgid "" "Merge in even outdated translations. The default is to drop them with a " "warning message." msgstr "" "Funde até traduções desactualizadas. A predefinição é abandoná-las com uma " "mensagem de aviso." #. type: =item #: ../../debconf-mergetemplate:54 msgid "--drop-old-templates" msgstr "--drop-old-templates" #. type: textblock #: ../../debconf-mergetemplate:56 msgid "" "If a translation has an entire template that is not in the master file (and " "thus is probably an old template), drop that entire template." msgstr "" "Se uma tradução tem um template inteiro que não está no ficheiro mestre (e " "por isso é provavelmente um template antigo), abandona esse template inteiro." #. type: textblock #: ../../debconf-mergetemplate:63 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-set-selections:5 msgid "debconf-set-selections - insert new values into the debconf database" msgstr "" "debconf-set-selections - insere novos valores na base de dados do debconf" #. type: verbatim #: ../../debconf-set-selections:9 #, no-wrap msgid "" " debconf-set-selections file\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" msgstr "" " debconf-set-selections ficheiro\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" #. type: textblock #: ../../debconf-set-selections:14 msgid "" "B can be used to pre-seed the debconf database with " "answers, or to change answers in the database. Each question will be marked " "as seen to prevent debconf from asking the question interactively." msgstr "" "B pode ser usado para pré-semear a base de dados " "debconf com respostas, ou para modificar as respostas na base de dados. Cada " "questão será marcada como 'vista' para prevenir o debconf de perguntar a " "questão interactivamente." #. type: textblock #: ../../debconf-set-selections:18 msgid "Reads from a file if a filename is given, otherwise from stdin." msgstr "" "Lê a partir dum ficheiro de um nome de ficheiro é fornecido, caso contrário " "a partir do stdin." #. type: textblock #: ../../debconf-set-selections:22 msgid "" "Only use this command to seed debconf values for packages that will be or " "are installed. Otherwise you can end up with values in the database for " "uninstalled packages that will not go away, or with worse problems involving " "shared values. It is recommended that this only be used to seed the database " "if the originating machine has an identical install." msgstr "" "Use apenas este comando para semear valores de debconf para pacotes que irão " "ser ou estão instalados. Caso contrário você pode acabar com valores na base " "de dados para pacotes desinstalados que não desaparecem, ou com problemas " "piores que envolvem valores partilhados. É recomendado que isto apenas seja " "usado para semear a base de dados se a máquina original tiver uma instalação " "idêntica." #. type: =head1 #: ../../debconf-set-selections:28 msgid "DATA FORMAT" msgstr "FORMATO DE DADOS" #. type: textblock #: ../../debconf-set-selections:30 msgid "" "The data is a series of lines. Lines beginning with a # character are " "comments. Blank lines are ignored. All other lines set the value of one " "question, and should contain four values, each separated by one character of " "whitespace. The first value is the name of the package that owns the " "question. The second is the name of the question, the third value is the " "type of this question, and the fourth value (through the end of the line) " "is the value to use for the answer of the question." msgstr "" "Os dados são uma série de linhas. As linhas começadas com o caractere # são " "comentários. As linhas vazias são ignoradas. Todas as outras linhas definem " "o valor de uma questão, e deve conter quatro valores, cada um separado por " "um caractere de espaço em branco. O primeiro valor é o nome do pacote que " "possui a questão. O segundo é o nome da questão, o terceiro valor é o tipo " "de questão, e o quarto valor (até ao fim da linha) é o valor a usar para a " "resposta à questão." #. type: textblock #: ../../debconf-set-selections:38 msgid "" "Alternatively, the third value can be \"seen\"; then the preseed line only " "controls whether the question is marked as seen in debconf's database. Note " "that preseeding a question's value defaults to marking that question as " "seen, so to override the default value without marking a question seen, you " "need two lines." msgstr "" "Alternativamente, o terceiro valor pode ser \"visto\"; então a linha " "precedente apenas controla se a questão está marcada como vista na base de " "dados do debconf. Note que para preceder os valores predefinidos de uma " "questão para marcar essa questão como vista, portanto para sobrepor o valor " "predefinido sem marcar a questão como vista, você precisa de duas linhas." #. type: textblock #: ../../debconf-set-selections:44 msgid "" "Lines can be continued to the next line by ending them with a \"\\\" " "character." msgstr "" "As linhas podem continuar para a próxima linha ao acabarem com o caractere " "\"\\\"." #. type: verbatim #: ../../debconf-set-selections:49 #, no-wrap msgid "" " # Force debconf priority to critical.\n" " debconf debconf/priority select critical\n" "\n" msgstr "" " # Força a prioridade do debconf para crítica.\n" " debconf debconf/priority select critical\n" "\n" #. type: verbatim #: ../../debconf-set-selections:52 #, no-wrap msgid "" " # Override default frontend to readline, but allow user to select.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" msgstr "" " # Sobrepõe o frontend predefinido para readline, mas permite ai utilizador seleccionar.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" #. type: =item #: ../../debconf-set-selections:60 msgid "B<--verbose>, B<-v>" msgstr "B<--verbose>, B<-v>" #. type: textblock #: ../../debconf-set-selections:62 msgid "verbose output" msgstr "saída detalhada" #. type: =item #: ../../debconf-set-selections:64 msgid "B<--checkonly>, B<-c>" msgstr "B<--checkonly>, B<-c>" #. type: textblock #: ../../debconf-set-selections:66 msgid "only check the input file format, do not save changes to database" msgstr "" "apenas verifica o formato do ficheiro de entrada, não guarda alterações na " "base de dados" #. type: textblock #: ../../debconf-set-selections:72 msgid "L (available in the debconf-utils package)" msgstr "L (disponível no pacote debconf-utils)" #. type: textblock #: ../../debconf-show:5 msgid "debconf-show - query the debconf database" msgstr "debconf-show - questiona a base de dados debconf" #. type: verbatim #: ../../debconf-show:9 #, no-wrap msgid "" " debconf-show packagename [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" msgstr "" " debconf-show nome-de-pacote [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" #. type: textblock #: ../../debconf-show:15 msgid "B lets you query the debconf database in different ways." msgstr "" "B permite-lhe questionar a base de dados debconf de diferentes " "maneiras." #. type: textblock #: ../../debconf-show:17 msgid "" "The most common use is \"debconf-show packagename\", which displays all " "items in the debconf database owned by a given package, and their current " "values. Questions that have been asked already are prefixed with an '*'." msgstr "" "A utilização mais comum é \"debconf-show nome-do-pacote\", o que mostra " "todos os itens na base de dados debconf possuídos pelo dado pacote, e os " "seus valores actuais. As questões que já foram respondidas são prefixadas " "com um '*'." #. type: textblock #: ../../debconf-show:21 msgid "" "This can be useful as a debugging aid, and especially handy in bug reports " "involving a package's use of debconf." msgstr "" "Isto pode ser útil como ajuda na depuração, e especialmente habilidoso em " "relatórios de bugs que envolvam a utilização de debconf por um pacote." #. type: =item #: ../../debconf-show:28 msgid "B<--db=>I" msgstr "B<--db=>I" #. type: textblock #: ../../debconf-show:30 msgid "" "Specify the database to query. By default, debconf-show queries the main " "database." msgstr "" "Especifica a base de dados a questionar. Por predefinição, debconf-show " "questiona a base de dados principal." #. type: =item #: ../../debconf-show:33 msgid "B<--listowners>" msgstr "B<--listowners>" #. type: textblock #: ../../debconf-show:35 msgid "" "Lists all owners of questions in the database. Generally an owner is " "equivalent to a debian package name." msgstr "" "Lista todos os donos de questões na base de dados. Geralmente um dono é " "equivalente a um nome de um pacote debian." #. type: =item #: ../../debconf-show:38 msgid "B<--listdbs>" msgstr "B<--listdbs>" #. type: textblock #: ../../debconf-show:40 msgid "Lists all available databases." msgstr "Lista todas as bases de dados disponíveis." #. type: textblock #: ../../debconf-show:154 msgid "Joey Hess and Sylvain Ferriol" msgstr "Joey Hess e Sylvain Ferriol" #. type: textblock #: ../../dpkg-preconfigure:5 msgid "" "dpkg-preconfigure - let packages ask questions prior to their installation" msgstr "" "dpkg-preconfigure - permite que os pacotes façam perguntas antes da sua " "instalação" #. type: verbatim #: ../../dpkg-preconfigure:9 #, no-wrap msgid "" " dpkg-preconfigure [options] package.deb\n" "\n" msgstr "" " dpkg-preconfigure [opções] pacote.deb\n" "\n" #. type: verbatim #: ../../dpkg-preconfigure:11 #, no-wrap msgid "" " dpkg-preconfigure --apt\n" "\n" msgstr "" " dpkg-preconfigure --apt\n" "\n" #. type: textblock #: ../../dpkg-preconfigure:15 msgid "" "B lets packages ask questions before they are installed. " "It operates on a set of debian packages, and all packages that use debconf " "will have their config script run so they can examine the system and ask " "questions." msgstr "" "B permite que os pacotes façam perguntas antes de serem " "instalados. Opera num conjunto de pacotes debian, e todos os pacotes que " "usam debconf terão o seu script config executado para que possam examinar o " "sistema e fazer perguntas." #. type: textblock #: ../../dpkg-preconfigure:30 msgid "" "Set the lowest priority of questions you are interested in. Any questions " "with a priority below the selected priority will be ignored and their " "default answers will be used." msgstr "" "Define a prioridade mais baixa das questões que lhe interessam. Quaisquer " "questões com uma prioridade abaixo da prioridade seleccionada serão " "ignoradas e serão usadas as suas respostas predefinidas." #. type: =item #: ../../dpkg-preconfigure:38 msgid "B<--apt>" msgstr "B<--apt>" #. type: textblock #: ../../dpkg-preconfigure:40 msgid "" "Run in apt mode. It will expect to read a set of package filenames from " "stdin, rather than getting them as parameters. Typically this is used to " "make apt run dpkg-preconfigure on all packages before they are installed. " "To do this, add something like this to /etc/apt/apt.conf:" msgstr "" "Corre em modo apt. Irá esperar ler um conjunto de nomes de ficheiros de " "pacotes a partir do stdin, em vez de os obter como parâmetros. Tipicamente " "isto é usado para fazer com que o apt corra o dpkg-preconfigure em todos os " "pacotes antes de eles serem instalados. Para fazer isto, adicione algo como " "isto ao /etc/apt/apt.conf:" #. type: verbatim #: ../../dpkg-preconfigure:45 #, no-wrap msgid "" " // Pre-configure all packages before\n" " // they are installed.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" msgstr "" " // Pré-configura todos os pacotes antes\n" " // de estarem instalados.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" #. type: =item #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69 msgid "B<-h>, B<--help>" msgstr "B<-h>, B<--help>" #. type: textblock #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71 msgid "Display usage help." msgstr "Mostra a ajuda de utilização." #. type: textblock #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79 msgid "L" msgstr "L" #. type: textblock #: ../../dpkg-reconfigure:5 msgid "dpkg-reconfigure - reconfigure an already installed package" msgstr "dpkg-reconfigure - reconfigura um pacote já instalado" #. type: verbatim #: ../../dpkg-reconfigure:9 #, no-wrap msgid "" " dpkg-reconfigure [options] packages\n" "\n" msgstr "" " dpkg-reconfigure [opções] pacotes\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:13 msgid "" "B reconfigures packages after they have already been " "installed. Pass it the names of a package or packages to reconfigure. It " "will ask configuration questions, much like when the package was first " "installed." msgstr "" "B reconfigura pacotes após eles já estarem instalados. " "Passe-lhe o nome do pacote ou pacotes a reconfigurar. Irá fazer perguntas de " "configuração, à semelhança de quando o pacote foi instalado pela primeira " "vez." #. type: textblock #: ../../dpkg-reconfigure:18 msgid "" "If you just want to see the current configuration of a package, see " "L instead." msgstr "" "Se apenas deseja ver a configuração actual de um pacote, veja L em vez disto." #. type: textblock #: ../../dpkg-reconfigure:27 msgid "" "Select the frontend to use. The default frontend can be permanently changed " "by:" msgstr "" "Selecciona o frontend a usar. O frontend predefinido pode ser alterado " "permanentemente ao:" #. type: verbatim #: ../../dpkg-reconfigure:30 #, no-wrap msgid "" " dpkg-reconfigure debconf\n" "\n" msgstr "" " dpkg-reconfigure debconf\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:32 msgid "" "Note that if you normally have debconf set to use the noninteractive " "frontend, dpkg-reconfigure will use the dialog frontend instead, so you " "actually get to reconfigure the package." msgstr "" "Note que se você normalmente tiver o debconf configurado para usar o " "frontend não-interactivo, o dpkg-reconfigure irá usar o frontend dialog, " "para que você realmente possa reconfigurar o pacote." #. type: textblock #: ../../dpkg-reconfigure:38 msgid "" "Specify the minimum priority of question that will be displayed. dpkg-" "reconfigure normally shows low priority questions no matter what your " "default priority is. See L for a list." msgstr "" "Especifica a prioridade mínima da questão que será mostrada. O dpkg-" "reconfigure normalmente mostra questões de baixa prioridade " "independentemente de qual seja a sua prioridade predefinida. Veja " "L para uma listagem." #. type: =item #: ../../dpkg-reconfigure:46 msgid "B<--default-priority>" msgstr "B<--default-priority>" #. type: textblock #: ../../dpkg-reconfigure:48 msgid "" "Use whatever the default priority of question is, instead of forcing the " "priority to low." msgstr "" "Usa qualquer que seja a prioridade predefinida da questão, em vez de forçar " "a prioridade para baixa." #. type: =item #: ../../dpkg-reconfigure:51 msgid "B<-u>, B<--unseen-only>" msgstr "B<-u>, B<--unseen-only>" #. type: textblock #: ../../dpkg-reconfigure:53 msgid "" "By default, all questions are shown, even if they have already been " "answered. If this parameter is set though, only questions that have not yet " "been seen will be asked." msgstr "" "Por predefinição, são mostradas todas as questões, mesmo que já tenham sido " "respondidas. Se este parâmetro for definido, apenas serão perguntadas as " "questões ainda não vistas." #. type: =item #: ../../dpkg-reconfigure:57 msgid "B<--force>" msgstr "B<--force>" #. type: textblock #: ../../dpkg-reconfigure:59 msgid "" "Force dpkg-reconfigure to reconfigure a package even if the package is in an " "inconsistent or broken state. Use with caution." msgstr "" "Força o dpkg-reconfigure a reconfigurar um pacote mesmo que o pacote esteja " "num estado quebrado ou inconsistente. Use com cuidado." #. type: =item #: ../../dpkg-reconfigure:62 msgid "B<--no-reload>" msgstr "B<--no-reload>" #. type: textblock #: ../../dpkg-reconfigure:64 msgid "" "Prevent dpkg-reconfigure from reloading templates. Use with caution; this " "will prevent dpkg-reconfigure from repairing broken templates databases. " "However, it may be useful in constrained environments where rewriting the " "templates database is expensive." msgstr "" "Previne o dpkg-reconfigure de recarregar os templates. Use com cuidado, isto " "irá impedir o dpkg-reconfigure de reparar bases de dados de templates " "danificadas. No entanto, pode ser útil em ambientes constrangidos onde " "reescrever a base de dados de templates pode custar caro." #. type: TH #: debconf.conf.5:1 #, no-wrap msgid "DEBCONF.CONF" msgstr "DEBCONF.CONF" #. type: Plain text #: debconf.conf.5:4 msgid "debconf.conf - debconf configuration file" msgstr "debconf.conf - ficheiro de configuração de debconf" #. type: Plain text #: debconf.conf.5:12 msgid "" "Debconf is a configuration system for Debian packages. /etc/debconf.conf and " "~/.debconfrc are configuration files debconf uses to determine which " "databases it should use. These databases are used for storing two types of " "information; dynamic config data the user enters into it, and static " "template data. Debconf offers a flexible, extensible database backend. New " "drivers can be created with a minimum of effort, and sets of drivers can be " "combined in various ways." msgstr "" "Debconf é um sistema de configuração para pacotes Debian. /etc/debconf.conf " "e ~/.debconfrc são ficheiros de configuração que o debconf usa para " "determinar quais bases de dados deve usar. Estas bases de dados para " "armazenar dois tipos de informação; dados de configuração dinâmicos que o " "utilizador insere, e dados de template estáticos. O debconf oferece um " "backend de base de dados extensível e flexível. Podem ser criadas novas " "drivers com um esforço mínimo, e conjuntos de drivers podem ser combinados " "de várias maneiras." #. type: Plain text #: debconf.conf.5:17 #, no-wrap msgid "" " # This is a sample config file that is\n" " # sufficient to use debconf.\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" " # Este é um exemplo de ficheiro de configuração que é\n" " # suficiente para usar debconf.\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:21 #, no-wrap msgid "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" #. type: Plain text #: debconf.conf.5:26 #, no-wrap msgid "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" msgstr "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" #. type: SH #: debconf.conf.5:26 #, no-wrap msgid "FILE FORMAT" msgstr "FORMATO DE FICHEIRO" #. type: Plain text #: debconf.conf.5:30 msgid "" "The format of this file is a series of stanzas, each separated by at least " "one wholly blank line. Comment lines beginning with a \"#\" character are " "ignored." msgstr "" "O formato deste ficheiro é uma série de estrofes, cada uma separada por pelo " "menos uma linha completamente vazia. As linhas de comentários começadas com " "um caractere \"#\" são ignoradas." #. type: Plain text #: debconf.conf.5:33 msgid "" "The first stanza of the file is special, is used to configure debconf as a " "whole. Two fields are required to be in this first stanza:" msgstr "" "A primeira estrofe do ficheiro é especial, é usada para configurar o debconf " "como uma entidade completa. São necessários dois campos nesta primeira " "estrofe:" #. type: TP #: debconf.conf.5:34 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:37 msgid "Specifies the name of the database from which to load config data." msgstr "" "Especifica o nome da base de dados de onde carregar dados de configuração." #. type: TP #: debconf.conf.5:37 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:40 msgid "Specifies the name of the database to use for the template cache." msgstr "Especifica o nome da base de dados a usar para a cache de template." #. type: Plain text #: debconf.conf.5:43 msgid "Additional fields that can be used include:" msgstr "Campos adicionais que podem ser usados incluem:" #. type: TP #: debconf.conf.5:44 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:48 msgid "" "The frontend Debconf should use, overriding any frontend set in the debconf " "database." msgstr "" "O frontend que o Debconf deverá usar, sobrepondo qualquer definição de " "frontend na base de dados do debconf." #. type: TP #: debconf.conf.5:48 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:52 msgid "" "The priority Debconf should use, overriding any priority set in the debconf " "database." msgstr "" "A prioridade que o Debconf deve usar, sobrepondo-se a qualquer prioridade " "definida na base de dados debconf." #. type: TP #: debconf.conf.5:52 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:59 msgid "" "The email address Debconf should send mail to if it needs to make sure that " "the admin has seen an important message. Defaults to \"root\", but can be " "set to any valid email address to send the mail there. If you prefer to " "never have debconf send you mail, specify a blank address. This can be " "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable." msgstr "" "O endereço de email para onde o debconf deve enviar mail se precisar de " "certificar que o administrador viu uma mensagem importante. A predefinição é " "\"root\", mas pode ser definido para qualquer endereço de email válido para " "enviar o mail para lá. Se preferir que o debconf nunca lhe mande nenhum " "mail, especifique um endereço vazio. Isto pode ser sobreposto na hora com a " "variável de ambiente DEBCONF_ADMIN_EMAIL." #. type: Plain text #: debconf.conf.5:59 debconf.conf.5:395 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:67 msgid "" "If set, this will cause debconf to output debugging information to standard " "error. The value it is set to can be something like \"user\", \"developer\", " "\"db\", or a regular expression. Typically, rather than setting it " "permanently in a config file, you will only want to temporarily turn on " "debugging, and the DEBCONF_DEBUG environment variable can be set instead to " "accomplish that." msgstr "" "Se definido, isto fará o debconf enviar informação de depuração para o erro " "standard. O valor que é definido pode ser algo como \"user\", \"developer\", " "\"db\", ou uma expressão regular. Tipicamente, em vez de o definir " "permanentemente num ficheiro de configuração, você vai apenas querer ligar a " "depuração temporariamente, e a variável de ambiente DEBCONF_DEBUG pode ser " "definida para conseguir isso." #. type: TP #: debconf.conf.5:67 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:72 msgid "" "If set, this will make debconf not display warnings about various things. " "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment " "variable." msgstr "" "Se definido,isto fará com que o debconf não mostre avisos sobre várias " "coisas. Isto pode ser sobreposto na hora com a variável de ambiente " "DEBCONF_NOWARNINGS." #. type: TP #: debconf.conf.5:72 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:77 msgid "" "Makes debconf log debugging information as it runs, to the syslog. The value " "it is set to controls that is logged. See Debug, above for an explanation of " "the values that can be set to control what is logged." msgstr "" "Faz o debconf registar informação de depuração no syslog, quando é " "executado. O valor é definido para controlar o que é registado. Veja Debug, " "em cima, para uma explicação dos valores que podem ser definidos para " "controlar o que é registado." #. type: TP #: debconf.conf.5:77 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:82 msgid "" "If set to \"true\", makes some debconf frontends use a special terse display " "mode that outputs as little as possible. Defaults to false. Terse mode may " "be temporarily set via the DEBCONF_TERSE environment variable." msgstr "" "Se definido para \"true\", faz com que alguns frontends do debconf usem um " "modo de mostrador conciso especial que mostra o mínimo possível. A " "predefinição é 'false'. O modo conciso pode ser definido temporariamente " "através da variável de ambiente DEBCONF_TERSE." #. type: Plain text #: debconf.conf.5:87 #, no-wrap msgid "" "For example, the first stanza of a file might look like this:\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" "Por exemplo, a primeira estrofe de um ficheiro pode parecer-se com isto:\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:91 #, no-wrap msgid "" "Each remaining stanza in the file sets up a database. A database stanza\n" "begins by naming the database:\n" " Name: configdb\n" msgstr "" "Cada estrofe que permanece no ficheiro define uma base de dados. Uma estrofe de base de dados\n" "começa por dar o nome à base de dados:\n" " Name: configdb\n" #. type: Plain text #: debconf.conf.5:95 #, no-wrap msgid "" "Then it indicates what database driver should be used for this database.\n" "See DRIVERS, below, for information about what drivers are available.\n" " Driver: File\n" msgstr "" "Depois indica que driver de base de dados deve ser usada para esta base de dados.\n" "Veja DRIVERS em baixo, para informação acerca de quais drivers estão disponíveis.\n" " Driver: Ficheiro\n" #. type: Plain text #: debconf.conf.5:100 #, no-wrap msgid "" "You can indicate that the database is not essential to the proper\n" "functioning of debconf by saying it is not required. This will make debconf\n" "muddle on if the database fails for some reason.\n" " Required: false\n" msgstr "" "Você pode indicar que a base de dados não é essencial ao funcionamento\n" "apropriado do debconf dizendo que não é requerida. Isto fará com que o debconf\n" "se atrapalhe se a base de dados falhe por alguma razão.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:104 #, no-wrap msgid "" "You can mark any database as readonly and debconf will not write anything\n" "to it.\n" " Readonly: true\n" msgstr "" "Você pode marcar qualquer base de dados como 'só-leitura' e o debconf não irá\n" "escrever nada nela.\n" " Readonly: true\n" #. type: Plain text #: debconf.conf.5:107 msgid "" "You can also limit what types of data can go into the database with Accept- " "and Reject- lines; see ACCESS CONTROLS, below." msgstr "" "Você também pode limitar que tipos de dados podem ir para a base de dados " "com linhas Accept- e Reject-; veja CONTROLES DE ACESSO em baixo." #. type: Plain text #: debconf.conf.5:112 #, no-wrap msgid "" "The remainder of each database stanza is used to provide configuration\n" "specific to that driver. For example, the Text driver needs to know\n" "a directory to put the database in, so you might say:\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" "O restante de cada estrofe de base de dados é usado para disponibilizar\n" "configuração específica para essa driver. Por exemplo, a driver Text precisa\n" "de saber um directório onde colocar a base de dados, para que você possa dizer:\n" " Filename: /var/cache/debconf/config.dat\n" #. type: SH #: debconf.conf.5:112 #, no-wrap msgid "DRIVERS" msgstr "DRIVERS" #. type: Plain text #: debconf.conf.5:119 msgid "" "A number of drivers are available, and more can be written with little " "difficulty. Drivers come in two general types. First there are real drivers " "-- drivers that actually access and store data in some kind of database, " "which might be on the local filesystem, or on a remote system. Then there " "are meta-drivers that combine other drivers together to form more " "interesting systems. Let's start with the former." msgstr "" "Estão disponíveis um número de drivers, e podem ser escritas mais com pouca " "dificuldade. As drivers vêm em dois tipos gerais. Primeiro existem as " "drivers verdadeiras -- drivers que realmente acedem e armazenam dados nalgum " "tipo de base de dados, que pode estar num sistema de ficheiros local, ou num " "sistema remoto. Depois existem as meta-drivers que combinam outras drivers " "juntamente para formar sistemas mais interessantes. Vamos começar pelas " "primeiras." #. type: TP #: debconf.conf.5:120 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:127 msgid "" "This database driver allows debconf to store a whole database in a single " "flat text file. This makes it easy to archive, transfer between machines, " "and edit. It is one of the more compact database formats in terms of disk " "space used. It is also one of the slowest." msgstr "" "Esta driver de base de dados permite ao debconf armazenar uma base de dados " "inteira num único ficheiro de texto simples. Isto torna mais fácil arquivar, " "transferir entre máquinas, e editar. É um dos formatos de base de dados mais " "compactado em termos de espaço de disco usado. É também um dos mais lentos." #. type: Plain text #: debconf.conf.5:130 msgid "" "On the downside, the entire file has to be read in each time debconf starts " "up, and saving it is also slow." msgstr "" "No aspecto negativo, o ficheiro completo tem de ser lido de cada vez que o " "debconf arranca, e guardá-lo é também lento." #. type: Plain text #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309 msgid "The following things are configurable for this driver." msgstr "As seguintes coisas são configuráveis para esta driver." #. type: TP #: debconf.conf.5:133 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:136 msgid "The file to use as the database. This is a required field." msgstr "O ficheiro a ser usado como base de dados. Este é um campo necessário." #. type: TP #: debconf.conf.5:136 debconf.conf.5:203 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:140 msgid "" "The permissions to create the file with if it does not exist. Defaults to " "600, since the file could contain passwords in some circumstances." msgstr "" "As permissões para criar um ficheiro se este ainda não existir. A " "predefinição é 600, porque o ficheiro pode conter palavras-passe em algumas " "circunstâncias." #. type: TP #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 msgid "" "The format of the file. See FORMATS below. Defaults to using a rfc-822 like " "format." msgstr "" "O formato do ficheiro. Veja FORMATOS em baixo. A predefinição é usar um " "formato tipo rfc-822." #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:148 debconf.conf.5:184 msgid "" "Whether a backup should be made of the old file before changing it. " "Defaults to true." msgstr "" "Se deve ser feita uma cópia de segurança (backup) do ficheiro antigo antes " "de o alterar. A predefinição é 'true'." #. type: Plain text #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209 msgid "As example stanza setting up a database using this driver:" msgstr "Um exemplo de estrofe que define uma base de dados usando esta driver:" #. type: Plain text #: debconf.conf.5:155 #, no-wrap msgid "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" msgstr "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" #. type: TP #: debconf.conf.5:156 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:166 msgid "" "This database driver allows debconf to store data in a hierarchical " "directory structure. The names of the various debconf templates and " "questions are used as-is to form directories with files in them. This format " "for the database is the easiest to browse and fiddle with by hand. It has " "very good load and save speeds. It also typically occupies the most space, " "since a lot of small files and subdirectories do take up some additional " "room." msgstr "" "Esta driver de base de dados permite ao debconf armazenar dados numa " "estrutura de directórios hierárquicos. Os nomes dos vários templates de " "debconf e questões são usados como são para formar directórios como " "ficheiros neles. Este formato para a base de dados é o mais fácil de navegar " "e passear manualmente. Tem bons tempos de carga e gravação. Tipicamente " "também é o que ocupa mais espaço, porque muitos ficheiro pequenos e sub-" "directórios ocupam algum espaço adicional." #. type: TP #: debconf.conf.5:169 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:172 msgid "The directory to put the files in. Required." msgstr "O directório onde colocar os ficheiros. Necessário." #. type: TP #: debconf.conf.5:172 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:176 msgid "" "An extension to add to the names of files. Must be set to a non-empty " "string; defaults to \".dat\"" msgstr "" "Uma extensão a adicionar aos nomes dos ficheiros. Tem que estar definida " "para uma string não vazia; a predefinição é \".dat\"" #. type: Plain text #: debconf.conf.5:192 #, no-wrap msgid "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" msgstr "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" #. type: TP #: debconf.conf.5:193 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:200 msgid "" "This database driver is a compromise between the File and DirTree databases. " "It uses a directory, in which there is (approximately) one file per package " "that uses debconf. This is fairly fast, while using little more room than " "the File database driver." msgstr "" "Esta driver de base de dados é um compromisso entre as bases de dados File e " "DirTree. Usa um directório, onde existe um ficheiro (aproximadamente) por " "cada pacote que usa debconf. Isto é bastante rápido, enquanto usa um pouco " "mais de espaço que a driver de bases de dados File." #. type: Plain text #: debconf.conf.5:203 msgid "" "This driver is configurable in the same ways as is the DirTree driver, plus:" msgstr "Esta driver é configurada do mesmo modo que a driver DirTree, mais:" #. type: Plain text #: debconf.conf.5:207 msgid "" "The permissions to create files with. Defaults to 600, since the files could " "contain passwords in some circumstances." msgstr "" "As permissões com as quais criar ficheiros. A predefinição é 600, porque os " "ficheiros podem conter palavras-passe em algumas circunstâncias." #. type: Plain text #: debconf.conf.5:213 #, no-wrap msgid "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" msgstr "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" #. type: TP #: debconf.conf.5:214 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:218 msgid "" "WARNING: This database driver is currently experimental. Use with caution." msgstr "" "AVISO: Esta driver de base de dados é actualmente experimental. Use-a com " "cuidado." #. type: Plain text #: debconf.conf.5:226 msgid "" "This database driver accesses a LDAP directory for debconf configuration " "data. Due to the nature of the beast, LDAP directories should typically be " "accessed in read-only mode. This is because multiple accesses can take " "place, and it's generally better for data consistency if nobody tries to " "modify the data while this is happening. Of course, write access is " "supported for those cases where you do want to update the config data in the " "directory." msgstr "" "Esta driver de base de dados acede a uma directório LDAP para dados de " "configuração de debconf. Devido à natureza da besta, os directórios LDAP " "devem tipicamente ser acedidos em modo de apenas-leitura. Isto é porque " "podem ocorrer múltiplos acessos, e é geralmente melhor para a consistência " "dos dados se ninguém tentar modificá-los quando isto está a acontecer. Claro " "que o acesso de escrita é suportado para aqueles casos em que você quer " "actualizar os dados de configuração no directório." #. type: Plain text #: debconf.conf.5:229 msgid "" "For information about setting up a LDAP server for debconf, read /usr/share/" "doc/debconf-doc/README.LDAP (from the debconf-doc package)." msgstr "" "Para informação sobre configurar um servidor LDAP para o debconf, leia /usr/" "share/doc/debconf-doc/README.LDAP (do pacote debconf-doc)." #. type: Plain text #: debconf.conf.5:232 msgid "" "To use this database driver, you must have the libnet-ldap-perl package " "installed. Debconf suggests that package, but does not depend on it." msgstr "" "Para usar esta driver de base de dados, você precisa de ter o pacote libnet-" "ldap-perl instalado. O debconf sugere esse pacote, mas não depende dele." #. type: Plain text #: debconf.conf.5:236 msgid "" "Please carefully consider the security implications of using a remote " "debconf database. Unless you trust the source, and you trust the intervening " "network, it is not a very safe thing to do." msgstr "" "Por favor considere cuidadosamente as implicações de segurança de usar uma " "base de dados debconf remota. A menos que confie na fonte, e tenha confiança " "na rede interveniente, não é algo muito seguro de se fazer." #. type: TP #: debconf.conf.5:239 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:242 msgid "The host name or IP address of an LDAP server to connect to." msgstr "O nome de máquina ou endereço IP de um servidor LDAP para se ligar." #. type: TP #: debconf.conf.5:242 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:246 msgid "" "The port on which to connect to the LDAP server. If none is given, the " "default port is used." msgstr "" "O porto por onde ligar ao servidor LDAP. Se nenhum for fornecido, é usado o " "porto predefinido." #. type: TP #: debconf.conf.5:246 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:251 msgid "" "The DN under which all config items will be stored. Each config item will be " "assumed to live in a DN of cn=Eitem nameE,EBase DNE. If this " "structure is not followed, all bets are off." msgstr "" "O DN sob o qual todos os itens de configuração serão armazenados. A cada " "item de configuração será assumido que vive numa DN de cn=Eitem " "nameE,EBase DNE. Se esta estrutura não for seguida, todas as " "apostas estão fora." #. type: TP #: debconf.conf.5:251 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:255 msgid "" "The DN to bind to the directory as. Anonymous bind will be used if none is " "specified." msgstr "" "O DN para unir ao directório como. Será usada união anónima se nenhum for " "especificado." #. type: TP #: debconf.conf.5:255 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:259 msgid "" "The password to use in an authenticated bind (used with binddn, above). If " "not specified, anonymous bind will be used." msgstr "" "A palavra-passe a usar numa união autenticada (usada com o binddn, em cima). " "Se não for especificada, será usada união anónima." #. type: Plain text #: debconf.conf.5:265 msgid "" "This option should not be used in the general case. Anonymous binding should " "be sufficient most of the time for read-only access. Specifying a bind DN " "and password should be reserved for the occasional case where you wish to " "update the debconf configuration data." msgstr "" "Esta opção não deve ser usada nos casos gerais. A união anónima deve ser " "suficiente na maioria das vezes para acesso em modo só-leitura. Especificar " "uma união DN e palavra-passe deve ser reservado para casos ocasionais onde " "deseja actualizar os dados de configuração do debconf." #. type: TP #: debconf.conf.5:266 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:272 msgid "" "Enable access to individual LDAP entries, instead of fetching them all at " "once in the beginning. This is very useful if you want to monitor your LDAP " "logs for specific debconf keys requested. In this way, you could also write " "custom handling code on the LDAP server part." msgstr "" "Activa acesso a entradas LDAP individuais, em vez de obter-las todas de uma " "vez no inicio. Isto é muito útil se desejar monitorizar os seus logs do LDAP " "por pedidos de chaves debconf específicas. Deste modo, você também pode " "escrever código de manipulação personalizado na parte do servidor LDAP." #. type: Plain text #: debconf.conf.5:279 msgid "" "Note that when this option is enabled, the connection to the LDAP server is " "kept active during the whole Debconf run. This is a little different from " "the all-in-one behavior where two brief connections are made to LDAP; in the " "beginning to retrieve all the entries, and in the end to save eventual " "changes." msgstr "" "Note que quando esta opção está activa, a ligação ao servidor LDAP é mantida " "activa durante toda a execução do Debconf. Isto e um pouco diferente do " "comportamento todo-em-um onde duas ligações breves são feitas ao LDAP; no " "início para obter todas as entradas, e no fim para guardar eventuais " "alterações." #. type: Plain text #: debconf.conf.5:284 msgid "" "An example stanza setting up a database using this driver, assuming the " "remote database is on example.com and can be accessed anonymously:" msgstr "" "Um exemplo de estrofe que define uma base de dados usando esta driver, " "assumindo que a base de dados remota está em example.com e pode ser acedida " "em anonimato:" #. type: Plain text #: debconf.conf.5:291 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" msgstr "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" #. type: Plain text #: debconf.conf.5:294 msgid "" "Another example, this time the LDAP database is on localhost, and can be " "written to:" msgstr "" "Outro exemplo, desta vez a base de dados LDAP está em localhost, e pode ser " "escrita:" #. type: Plain text #: debconf.conf.5:301 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" msgstr "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" #. type: TP #: debconf.conf.5:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:307 msgid "" "This special-purpose database driver reads and writes the database from " "standard input/output. It may be useful for people with special needs." msgstr "" "Esta driver de base de dados de objectivos especiais lê e escreve na base de " "dados a partir da entrada/saída standard. Pode ser útil para pessoas com " "necessidades especiais." #. type: Plain text #: debconf.conf.5:314 msgid "" "The format to read and write. See FORMATS below. Defaults to using a rfc-822 " "like format." msgstr "" "O formato para ler e escrever. Veja FORMATOS em baixo. A predefinição é usar " "um formato tipo rfc-822." #. type: TP #: debconf.conf.5:314 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:318 msgid "" "File descriptor number to read from. Defaults to reading from stdin. If set " "to \"none\", the database will not read any data on startup." msgstr "" "O número de descritor de ficheiro de onde ler. A predefinição é stdin, Se " "definido para \"none\", a base de dados não irá ler nenhuns dados no " "arranque." #. type: TP #: debconf.conf.5:318 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:322 msgid "" "File descriptor number to write to. Defaults to writing to stdout. If set to " "\"none\", the database will be thrown away on shutdown." msgstr "" "O número de descritor de ficheiro para onde escrever. A predefinição é " "stdout, Se definido para \"none\", a base de dados será deitada fora ao " "desligar." #. type: Plain text #: debconf.conf.5:326 msgid "That's all of the real drivers, now moving on to meta-drivers.." msgstr "E é tudo sobre as drivers reais, agora vamos para as meta-drivers..." #. type: TP #: debconf.conf.5:326 debconf.conf.5:354 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:335 msgid "" "This driver stacks up a number of other databases (of any type), and allows " "them to be accessed as one. When debconf asks for a value, the first " "database on the stack that contains the value returns it. If debconf writes " "something to the database, the write normally goes to the first driver on " "the stack that has the item debconf is modifying, and if none do, the new " "item is added to the first writable database on the stack." msgstr "" "Esta driver empilha um número de outras bases de dados (de qualquer tipo), e " "permite que sejam acedidas como uma só. Quando o debconf pede um valor, a " "primeira base de dados na pilha que contém o valor devolve-o. Se o debconf " "escrever algo na base de dados, a escrita vai normalmente para a primeira " "driver na pilha que possui o item que o debconf está a modificar, e se " "nenhuma o tiver, o novo item é adicionado na primeira base de dados da pilha " "onde se pode escrever." #. type: Plain text #: debconf.conf.5:343 msgid "" "Things become more interesting if one of the databases on the stack is " "readonly. Consider a stack of the databases foo, bar, and baz, where foo and " "baz are both readonly. Debconf wants to change an item, and this item is " "only present in baz, which is readonly. The stack driver is smart enough to " "realize that won't work, and it will copy the item from baz to bar, and the " "write will take place in bar. Now the item in baz is shadowed by the item in " "bar, and it will not longer be visible to debconf." msgstr "" "As coisas tornam-se mais interessantes se uma das bases de dados da pilha " "for de só-leitura. Considere uma pilha das bases de dados foo, bar e baz " "onde foo e baz são ambas só-leitura. O debconf quer alterar um item, e este " "item está presente apenas em baz, a qual é só-leitura. A driver stack é " "suficientemente inteligente para perceber que isso não vai funcionar, e irá " "copiar o item de baz para bar, e a escrita irá ter lugar em bar. Agora o " "item em baz está colocado na sombra pelo item em bar, e não irá mais ser " "visível ao debconf." #. type: Plain text #: debconf.conf.5:350 msgid "" "This kind of thing is particularly useful if you want to point many systems " "at a central, readonly database, while still allowing things to be " "overridden on each system. When access controls are added to the picture, " "stacks allow you to do many other interesting things, like redirect all " "passwords to one database while a database underneath it handles everything " "else." msgstr "" "Este tipo de coisa é particularmente útil se você desejar apontar muitos " "sistemas a uma base de dados central de só-leitura, e ao mesmo tempo " "permitir que coisas possam ser ultrapassadas em cada sistema. Quando são " "adicionados controles de acesso à situação, as pilhas permitem-lhe fazer " "mais coisas interessantes, como redireccionar todas as palavras-passe para " "uma base de dados enquanto que a base de dados inferior lida com tudo o " "resto." #. type: Plain text #: debconf.conf.5:352 msgid "Only one piece of configuration is needed to set up a stack:" msgstr "" "Apenas é necessário um pedaço de configuração para configurar um stack:" #. type: Plain text #: debconf.conf.5:358 msgid "" "This is where you specify a list of other databases, by name, to tell it " "what makes up the stack." msgstr "" "Aqui é onde você especifica uma lista de outras bases de dados, pelo nome, " "para lhe dizer o que compõe a stack." #. type: Plain text #: debconf.conf.5:361 debconf.conf.5:387 msgid "For example:" msgstr "Por exemplo:" #. type: Plain text #: debconf.conf.5:365 #, no-wrap msgid "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" msgstr "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" #. type: Plain text #: debconf.conf.5:368 msgid "" "WARNING: The stack driver is not very well tested yet. Use at your own risk." msgstr "" "AVISO: A driver stack ainda não foi bem testada. Use sob sua " "responsabilidade." #. type: Plain text #: debconf.conf.5:374 msgid "" "This driver passes all requests on to another database driver. But it also " "copies all write requests to a backup database driver." msgstr "" "Esta driver passa todos os pedidos para outra driver de base de dados. Mas " "também copia todos os pedidos de escrita para uma driver de base de dados de " "salvaguarda." #. type: Plain text #: debconf.conf.5:376 debconf.conf.5:400 msgid "You must specify the following fields to set up this driver:" msgstr "" "Você tem de especificar os seguintes campos para configurar esta driver:" #. type: TP #: debconf.conf.5:378 debconf.conf.5:402 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:381 debconf.conf.5:405 msgid "The database to read from and write to." msgstr "A base de dados de onde ler e onde escrever." #. type: TP #: debconf.conf.5:381 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:384 msgid "The name of the database to send copies of writes to." msgstr "O nome da base da dados para enviar cópias das escritas." #. type: Plain text #: debconf.conf.5:392 #, no-wrap msgid "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" msgstr "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" #. type: Plain text #: debconf.conf.5:398 msgid "" "This driver passes all requests on to another database driver, outputting " "verbose debugging output about the request and the result." msgstr "" "Esta driver passa todos os pedidos para outra driver de base de dados, " "gerando saídas de depuração detalhadas acerca dos pedidos e resultados." #. type: SH #: debconf.conf.5:407 #, no-wrap msgid "ACCESS CONTROLS" msgstr "CONTROLOS DE ACESSO" #. type: Plain text #: debconf.conf.5:411 msgid "" "When you set up a database, you can also use some fields to specify access " "controls. You can specify that a database only accepts passwords, for " "example, or make a database only accept things with \"foo\" in their name." msgstr "" "Quando você configura uma base de dados, também pode usar alguns campos para " "especificar controlos de acesso. Você pode especificar que uma base de dados " "apenas aceita palavras-passe, por exemplo, ou fazer uma base de dados apenas " "aceitar coisas com \"foo\" nos seus nomes." #. type: TP #: debconf.conf.5:411 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:416 msgid "" "As was mentioned earlier, this access control, if set to \"true\", makes a " "database readonly. Debconf will read values from it, but will never write " "anything to it." msgstr "" "Como já dito antes, este controlo de acesso, se definido para \"true\", " "torna uma base de dados em só-leitura. O debconf irá ler valores dela, mas " "nunca irá escrever nada lá." #. type: TP #: debconf.conf.5:416 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:422 msgid "" "The text in this field is a perl-compatible regular expression that is " "matched against the names of items as they are requested from the database. " "Only if an items name matches the regular expression, will the database " "allow debconf to access or modify it." msgstr "" "O texto neste campo é uma expressão regular compatível com perl que é " "comparada com os nomes dos itens quando eles são pedidos da base de dados. " "Apenas se um nome de item corresponder à expressão regular, é que a base de " "dados permite ao debconf aceder-lhe ou modificá-la." #. type: TP #: debconf.conf.5:422 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:426 msgid "" "Like Accept-Name, except any item name matching this regular expression will " "be rejected." msgstr "" "Tal como Accept-Name, excepto que qualquer nome de item que corresponda a " "esta expressão regular será rejeitado." #. type: TP #: debconf.conf.5:426 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:431 msgid "" "Another regular expression, this matches against the type of the item that " "is being accessed. Only if the type matches the regex will access be granted." msgstr "" "Outra expressão regular, esta corresponde contra o tipo de item que está a " "ser acedido. Apenas se o tipo corresponder ao regex é que o acesso será " "concedido." #. type: TP #: debconf.conf.5:431 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:435 msgid "" "Like Accept-Type, except any type matching this regular expression will be " "rejected." msgstr "" "Tal como Accept-Type, excepto que qualquer tipo que corresponda a esta " "expressão regular será rejeitado." #. type: SH #: debconf.conf.5:435 #, no-wrap msgid "FORMATS" msgstr "FORMATOS" #. type: Plain text #: debconf.conf.5:439 msgid "" "Some of the database drivers use format modules to control the actual format " "in which the database is stored on disk. These formats are currently " "supported:" msgstr "" "Algumas das drivers de bases de dados usam módulos de formato para controlar " "o formato actual no qual a base de dados está armazenada no disco. São " "actualmente suportados estes formatos:" #. type: TP #: debconf.conf.5:439 #, no-wrap msgid "B<822>" msgstr "B<822>" #. type: Plain text #: debconf.conf.5:444 msgid "" "This is a file format loosely based upon the rfc-822 format for email " "message headers. Similar formats are used throughout Debian; in the dpkg " "status file, and so on." msgstr "" "Este é um formato de ficheiro livremente baseado no formato rfc-822 para " "cabeçalhos de mensagens de email. São usados formatos semelhantes em Debian, " "no ficheiro de estado do dpkg, e muito mais." #. type: Plain text #: debconf.conf.5:446 msgid "Here is a more complicated example of a debconf.conf file." msgstr "Aqui está um exemplo mais complicado de um ficheiro debconf.conf." #. type: Plain text #: debconf.conf.5:452 #, no-wrap msgid "" " # This stanza is used for general debconf setup.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" msgstr "" " # Esta estrofe é usada para configuração debconf geral.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" #. type: Plain text #: debconf.conf.5:457 #, no-wrap msgid "" " # This is my own local database.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" msgstr "" " # Esta é a minha base de dados local.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" #. type: Plain text #: debconf.conf.5:469 #, no-wrap msgid "" " # This is another database that I use to hold\n" " # only X server configuration.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # It's sorta hard to work out what questions\n" " # belong to X; it should be using a deeper\n" " # tree structure so I could just match on ^X/\n" " # Oh well.\n" " Accept-Name: xserver|xfree86|xbase\n" msgstr "" " # Isto é outra base de dados que eu uso para manter\n" " # apenas a configuração do servidor X.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # É difícil separar quais as questões pertencem\n" " # ao X; deveria usar uma estrutura de árvore mais funda\n" " # para que pudesse apenas coincidir com ^X/\n" " # Ora bem.\n" " Accept-Name: xserver|xfree86|xbase\n" #. type: Plain text #: debconf.conf.5:485 #, no-wrap msgid "" " # This is our company's global, read-only\n" " # (for me!) debconf database.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # I don't want any passwords that might be\n" " # floating around in there.\n" " Reject-Type: password\n" " # If this db is not accessible for whatever\n" " # reason, carry on anyway.\n" " Required: false\n" msgstr "" " # Esta é a base de dados debconf global da companhia,\n" " # apenas para leitura (para mim!).\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # Não quero nenhumas palavras-passe que possam\n" " # andar a flutuar por aí.\n" " Reject-Type: password\n" " # Se esta base de dados não estiver acessível por qualquer\n" " # motivo, continuar de qualquer maneira.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:493 #, no-wrap msgid "" " # I use this database to hold\n" " # passwords safe and secure.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" msgstr "" " # Eu uso esta base de dados para manter as\n" " # palavras-passe em segurança.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" #. type: Plain text #: debconf.conf.5:506 #, no-wrap msgid "" " # Let's put them all together\n" " # in a database stack.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # So, all passwords go to the password database.\n" " # Most X configuration stuff goes to the X\n" " # database, and anything else goes to my main\n" " # database. Values are looked up in each of those\n" " # in turn, and if none has a particular value, it\n" " # is looked up in the company-wide LDAP database\n" " # (unless it's a password).\n" msgstr "" " # Vamos juntá-los todos\n" " # numa pilha de base de dados.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # Portanto, todas as palavras-passe vão para a base de dados\n" " # das palavras-passe.\n" " # A maioria das configurações do X vão para a base de dados\n" " # do X, e tudo o resto vai para a minha base de dados\n" " # principal. Os valores são trancados em cada um deles\n" " # na sua vez, e se nenhum tiver um valor particular, é\n" " # trancado na base de dados LDAP geral da companhia\n" " # (a menos que seja uma palavra-passe).\n" #. type: Plain text #: debconf.conf.5:514 #, no-wrap msgid "" " # A database is also used to hold templates. We\n" " # don't need to make this as fancy.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" msgstr "" " # Uma base de dados também é usada para manter templates.\n" " # Nós não precisamos fazer isto tão imaginativo.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" #. type: SH #: debconf.conf.5:514 confmodule.3:22 #, no-wrap msgid "NOTES" msgstr "NOTAS" #. type: Plain text #: debconf.conf.5:517 msgid "" "If you use something like ${HOME} in this file, it will be replaced with the " "value of the named environment variable." msgstr "" "Se você usar algo como ${HOME} neste ficheiro, será substituído pelo valor " "da variável de ambiente com o mesmo nome." #. type: Plain text #: debconf.conf.5:521 msgid "" "Environment variables can also be used to override the databases on the fly, " "see B(7)" msgstr "" "Também podem ser usadas variáveis de ambiente para sobrepor a base de dados " "na hora, veja B(7)" #. type: Plain text #: debconf.conf.5:524 msgid "" "The field names (the part of the line before the colon) is case-insensitive. " "The values, though, are case sensitive." msgstr "" "Os nomes do campos (a parte da linha antes da vírgula) são insensíveis a " "maiúsculas/minúsculas. No entanto, os valores são sensíveis a maiúsculas/" "minúsculas." #. type: SH #: debconf.conf.5:524 #, no-wrap msgid "PLANNED ENHANCEMENTS" msgstr "MELHORIAS PLANEADAS" #. type: Plain text #: debconf.conf.5:533 msgid "" "More drivers and formats. Some ideas include: A SQL driver, with the " "capability to access a remote database. A DHCP driver, that makes available " "some special things like hostname, IP address, and DNS servers. A driver " "that pulls values out of public DNS records TXT fields. A format that is " "compatible with the output of cdebconf. An override driver, which can " "override the value field or flags of all requests that pass through it." msgstr "" "Mais drivers e formatos. Algumas ideias incluem: Uma de«river SQL, com a " "capacidade de aceder a uma base de dados remota. Uma driver DHCP, que torna " "disponível algumas coisas especiais como nome de máquina, endereço IP, e " "servidores DNS. Uma driver que puxa valores dos campos TXT de registos DNS " "públicos. Um formato compatível com a saída do cdebconf. Uma driver de " "sobreposição, que pode sobrepor o campo do valor ou as bandeiras de todos os " "pedidos que passam por ela." #. type: SH #: debconf.conf.5:533 #, no-wrap msgid "FILES" msgstr "FICHEIROS" #. type: Plain text #: debconf.conf.5:535 msgid "/etc/debconf.conf" msgstr "/etc/debconf.conf" #. type: Plain text #: debconf.conf.5:537 msgid "~/.debconfrc" msgstr "~/.debconfrc" #. type: Plain text #: debconf.conf.5:539 msgid "B(7)" msgstr "B(7)" #. type: Plain text #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969 msgid "Joey Hess Ejoeyh@debian.orgE" msgstr "Joey Hess Ejoeyh@debian.orgE" #. type: TH #: confmodule.3:1 #, no-wrap msgid "CONFMODULE" msgstr "CONFMODULE" #. type: Plain text #: confmodule.3:4 msgid "confmodule - communicate with Debian configuration system FrontEnd." msgstr "" "confmodule - comunicar com um FrontEnd do sistema de configuração Debian." #. type: Plain text #: confmodule.3:12 #, no-wrap msgid "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" msgstr "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" #. type: Plain text #: confmodule.3:22 msgid "" "This is a library of shell functions that eases communication with Debian's " "configuration management system. It can communicate with a FrontEnd via the " "debconf protocol. The design is that each command in the protocol is " "represented by one function in this module. The functionname is the same as " "the command, except it is prefixed with \"db_\" and is lower-case. Call the " "function and pass in any parameters you want to follow the command. Any " "textual return code from the FrontEnd will be returned to you in the $RET " "variable, while the numeric return code from the FrontEnd will be returned " "as a return code (and so those return codes must be captured or ignored)." msgstr "" "Esta é uma biblioteca de funções shell que facilita a comunicação com o " "sistema de gestão de configuração da Debian. Pode comunicar com um FrontEnd " "através do protocolo debconf. Está desenhada de modo que cada comando no " "protocolo é representado por uma função neste módulo. O nome-da-função é o " "mesmo que o comando, excepto se tiver o prefixo de \"db_\" e em minúsculas. " "Chame a função e passe-lhe quaisquer parâmetros que queira a seguir ao " "comando. Qualquer código de retorno textual do FrontEnd será retornado para " "si na variável $RET, enquanto que o código de retorno numérico do FrontEnd " "será retornado como um código de retorno (e assim esses códigos de retorno " "devem ser capturados ou ignorados)." #. type: Plain text #: confmodule.3:29 #, no-wrap msgid "" "Once this library is loaded, any text you later output will go to standard\n" "error, rather than standard output. This is a good thing in general, because\n" "text sent to standard output is interpreted by the FrontEnd as commands. If\n" "you do want to send a command directly to the FrontEnd, you must output it\n" "to file descriptor 3, like this:\n" " echo GET foo/bar E&3\n" msgstr "" "Após esta biblioteca estar carregada, qualquer texto que faça sair irá para o\n" "error standard em vez da saída standard. Geralmente isto é bom porque\n" "o texto enviado para a saída standard é interpretado pelo FrontEnd como\n" "comandos. Se você deseja enviar um comando directamente para o FrontEnd,\n" "você tem de enviá-lo para o descritor de ficheiro 3, assim:\n" " echo GET foo/bar E&3\n" #. type: Plain text #: confmodule.3:36 msgid "" "The library checks to make sure it is actually speaking to a FrontEnd by " "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is " "assumed to be running. If not, the library turns into one, and runs a copy " "of the script that loaded the library connected to it. This means that if " "you source this library, you should do so very near to the top of your " "script, because everything before the sourcing of the library may well be " "run again." msgstr "" "A biblioteca faz verificações para ter a certeza que está mesmo a falar com " "um FrontEnd ao examinar a variável DEBIAN_HAS_FRONTEND. Se estiver definida, " "assume-se que um FrontEnd está a correr. Se não, a biblioteca torna-se numa, " "e corre uma cópia do script que carregou a biblioteca ligada a ela. Isto " "significa que se você usar a fonte desta biblioteca, deve fazê-lo muito " "próximo do topo do seu script, porque tudo antes da fonte da biblioteca pode " "muito bem ser executado de novo." #. type: Plain text #: confmodule.3:42 msgid "" "B(7), B(8), B(8), " "debconf_specification in the debian-policy package" msgstr "" "B(7), B(8), B(8), " "debconf_specification no pacote debian-policy" #. type: TH #: debconf.7:1 #, no-wrap msgid "DEBCONF" msgstr "DEBCONF" #. type: Plain text #: debconf.7:4 msgid "debconf - Debian package configuration system" msgstr "debconf - Sistema de configuração de pacotes Debian" #. type: Plain text #: debconf.7:8 msgid "" "Debconf is a configuration system for Debian packages. There is a rarely-" "used command named debconf, documented in B(1)" msgstr "" "Debconf é um sistema de configuração para pacotes Debian. Existe um comando " "raramente usado chamado debconf, documentado em B(1)" #. type: Plain text #: debconf.7:16 msgid "" "Debconf provides a consistent interface for configuring packages, allowing " "you to choose from several user interface frontends. It supports " "preconfiguring packages before they are installed, which allows large " "installs and upgrades to ask you for all the necessary information up front, " "and then go do the work while you do something else. It lets you, if you're " "in a hurry, skip over less important questions and information while " "installing a package (and revisit it later)." msgstr "" "O debconf disponibiliza uma interface consistente para configurar pacotes, " "permitindo-lhe escolher entre vários frontends de interface de utilizador. " "Suporta a pré-configuração de pacotes antes deles serem instalados, o que " "permite que grandes instalações e actualizações lhe perguntem toda a " "informação necessária de avanço e depois façam o trabalho enquanto você faz " "outras coisas. Permite-lhe, se estiver com pressa, saltar as questões menos " "importantes e informação instala um pacote (e o revisita mais tarde)." #. type: SH #: debconf.7:16 #, no-wrap msgid "Preconfiguring packages" msgstr "Pré-configurando pacotes" #. type: Plain text #: debconf.7:22 msgid "" "Debconf can configure packages before they are even installed onto your " "system. This is useful because it lets all the questions the packages are " "going to ask be asked at the beginning of an install, so the rest of the " "install can proceed while you are away getting a cup of coffee." msgstr "" "O debconf pode configurar os pacotes antes de eles estarem instalados no seu " "sistema. Isto é útil porque permite que todas as questões que os pacotes vão " "perguntar seja perguntadas no princípio da instalação, então o resto da " "instalação pode prosseguir enquanto você vai beber um café." #. type: Plain text #: debconf.7:27 msgid "" "If you use apt (version 0.5 or above), and you have apt-utils installed, " "each package apt installs will be automatically preconfigured. This is " "controlled via I" msgstr "" "Se você usa o apt (versão 5.0 ou posterior), e tem o apt-utils instalado, " "cada pacote que o apt instala será automaticamente pré-configurado. Isto é " "controlado via I" #. type: Plain text #: debconf.7:33 msgid "" "Sometimes you might want to preconfigure a package by hand, when you're not " "installing it with apt. You can use B(8) to do that, " "just pass it the filenames of the packages you want to preconfigure. You " "will need apt-utils installed for that to work." msgstr "" "Por vezes você pode desejar pré-configurar um pacote manualmente, quando não " "está a instalá-lo com o apt. Pode usar o B(8) para isso, " "apenas passe-lhe os nomes de ficheiros dos pacotes que deseja pré-" "configurar. Você precisa do apt-utils instalado para isto funcionar." #. type: SH #: debconf.7:33 #, no-wrap msgid "Reconfiguring packages" msgstr "Reconfigurando pacotes" #. type: Plain text #: debconf.7:40 msgid "" "Suppose you installed the package, and answered debconf's questions, but now " "that you've used it awhile, you realize you want to go back and change some " "of your answers. In the past, reinstalling a package was often the thing to " "do when you got in this situation, but when you reinstall the package, " "debconf seems to remember you have answered the questions, and doesn't ask " "them again (this is a feature)." msgstr "" "Suponha que instalou um pacote e respondeu às questões do debconf, mas agora " "que o usou durante algum tempo, percebe que quer voltar atrás e alterar " "algumas das suas respostas. No passado, a reinstalação do pacote era muitas " "vezes o caminho a seguir nesta situação, mas quando reinstala o pacote, o " "debconf parece lembrar-se que você já respondeu às questões, e não as " "pergunta de novo (isto é uma característica)." #. type: Plain text #: debconf.7:44 #, no-wrap msgid "" "Luckily, debconf makes it easy to reconfigure any package that uses it.\n" "Suppose you want to reconfigure debconf itself. Just run, as root:\n" " dpkg-reconfigure debconf\n" msgstr "" "Felizmente, o debconf facilita a reconfiguração de qualquer pacote que o use.\n" "Suponha que quer reconfigurar o próprio debconf. Como root, execute:\n" " dpkg-reconfigure debconf\n" #. type: Plain text #: debconf.7:49 msgid "" "This will ask all the questions you saw when debconf was first installed. " "It may ask you other questions as well, since it asks even low priority " "questions that may have been skipped when the package was installed. You " "can use it on any other package that uses debconf, as well." msgstr "" "Isto irá perguntar-lhe todas as perguntas que viu quando o debconf foi " "instalado pela primeira vez. Pode também fazer-lhe outras perguntas, pois " "pergunta até questões de baixa prioridade que podem ter sido ignoradas " "quando o pacote foi instalado. Você pode também usá-lo em qualquer outro " "pacote que use debconf." #. type: SH #: debconf.7:49 #, no-wrap msgid "Frontends" msgstr "Frontends" #. type: Plain text #: debconf.7:53 msgid "" "One of debconf's unique features is that the interface it presents to you is " "only one of many, that can be swapped in at will. There are many debconf " "frontends available:" msgstr "" "Uma das características únicas do debconf é que a interface que lhe " "apresenta é uma de muitas, que podem ser trocadas quando deseja. Existem " "muitos frontends do debconf disponíveis:" #. type: TP #: debconf.7:53 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:60 msgid "" "The default frontend, this uses the B(1) or B(1) " "programs to display questions to you. It works in text mode." msgstr "" "O frontend predefinido, isto usa os programas B(1) ou B(1) " "para lhes mostrar perguntas. Funciona em modo de texto." #. type: TP #: debconf.7:60 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:72 msgid "" "The most traditional frontend, this looks quite similar to how Debian " "configuration always has been: a series of questions, printed out at the " "console using plain text, and prompts done using the readline library. It " "even supports tab completion. The libterm-readline-gnu-perl package is " "strongly recommended if you chose to use this frontend; the default readline " "module does not support prompting with default values. At the minimum, " "you'll need the perl-modules package installed to use this frontend." msgstr "" "O frontend mais tradicional, isto parece mesmo com o que a configuração da " "Debian sempre foi: uma série de questões, escritas na consola usando texto " "simples, e mostra os \"prontos\" usando a biblioteca readline. Até suporte " "acabamentos com a tecla tab. O pacote libterm-readline-gnu-perl é fortemente " "recomendado se escolher usar este frontend; o módulo predefinido do readline " "não suporta chamadas ao utilizador (prompt) com valores predefinidos. No " "mínimo você precisa do pacote perl-modules instalado para usar este frontend." #. type: Plain text #: debconf.7:77 msgid "" "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to " "the previous question (if that is supported by the package that is using " "debconf), and pagedown (or ctrl-v) will skip forward to the next question." msgstr "" "Este frontend tem algumas teclas de atalho especiais. Pageup (ou ctrl-u) irá " "voltar para a questão anterior (se isso for suportado pelo pacote que usa o " "debconf), e pagedown (ou ctrl-v) irá saltar em frente para a próxima questão." #. type: Plain text #: debconf.7:80 msgid "" "This is the best frontend for remote admin work over a slow connection, or " "for those who are comfortable with unix." msgstr "" "Este é o melhor frontend para trabalho de administração remota por uma " "ligação lenta, ou para aqueles que estão confortáveis com o unix." #. type: TP #: debconf.7:81 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:90 msgid "" "This is the anti-frontend. It never interacts with you at all, and makes the " "default answers be used for all questions. It might mail error messages to " "root, but that's it; otherwise it is completely silent and unobtrusive, a " "perfect frontend for automatic installs. If you are using this front-end, " "and require non-default answers to questions, you will need to preseed the " "debconf database; see the section below on Unattended Package Installation " "for more details." msgstr "" "Este é o anti-frontend. Nunca interage consigo de modo algum, e faz com que " "as respostas predefinidas sejam usadas por todas as questões. Pode enviar " "mails de erro para o root, mas é só; caso contrário é completamente " "silencioso e discreto, um frontend perfeito para instalações automáticas. Se " "você está a usar este frontend e precisa de respostas não predefinidas para " "as questões, você precisa de pré-semear a base de dados do debconf, veja a " "secção em baixo em Instalação de 'Pacotes Não Acompanhada' para mais " "detalhes." #. type: TP #: debconf.7:90 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:96 msgid "" "This is a modern X GUI using the gtk and gnome libraries. Of course, it " "requires a valid DISPLAY to work; debconf will fall back to other frontends " "if it can't work. Note that this frontend requires you have the libgtk3-perl " "package installed." msgstr "" "Isto é uma GUI X moderna que usa as bibliotecas gtk e gnome. Claro que " "necessita de um DISPLAY válido para funcionar; o debconf irá cair para para " "outros frontends se este não puder funcionar. Note que este frontend requer " "que tenha o pacote libgtk3-perl instalado." #. type: TP #: debconf.7:96 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:102 msgid "" "This frontend provides a modern X GUI based on the KDE Platform. You of " "course need a DISPLAY to use this frontend and you must install debconf-kde-" "helper package. The frontend will fall back to dialog if some of the " "prerequisites are not met." msgstr "" "Este frontend disponibiliza uma GUI X moderna baseada na plataforma KDE. " "Claro que você precisa de um DISPLAY para usar este frontend e você tem de " "instalar o pacote debconf-kde-helper. O frontend irá cair para dialog se " "algum dos pre-requisitos não estiver satisfeito." #. type: TP #: debconf.7:102 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:110 msgid "" "This is for those fanatics who have to do everything in a text editor. It " "runs your editor on a file that looks something like a typical unix config " "file, and you edit the file to communicate with debconf. Debconf's author " "prefers to not comment regarding the circumstances that led to this frontend " "being written." msgstr "" "Isto é para aqueles fanáticos que têm de fazer tudo num editor de texto. " "Executa o seu editor num ficheiro que parece algo como um ficheiro de " "configuração típico do unix, e você edita o ficheiro para comunicar com o " "debconf. O autor do debconf prefere não comentar sobre as circunstâncias que " "levaram à criação deste frontend." #. type: TP #: debconf.7:110 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:120 msgid "" "This frontend acts as a web server, that you connect to with your web " "browser, to browse the questions and answer them. It has a lot of promise, " "but is a little rough so far. When this frontend starts up, it will print " "out the location you should point your web browser to. You have to run the " "web browser on the same machine you are configuring, for security reasons." msgstr "" "Este frontend actua como um servidor web, onde você se liga com o seu " "navegador web, para explorar as perguntas e responder a elas. Tem muito a " "prometer, mas ainda precisa de muito trabalho. Quando este frontend arranca, " "escreve a localização para onde deve apontar o seu navegador web. Por razões " "de segurança, você tem que executar o navegador web na mesma máquina que " "está a configurar." #. type: Plain text #: debconf.7:126 msgid "" "Do keep in mind that this is not a very secure frontend. Anyone who has " "access to the computer being configured can currently access the web server " "and configure things while this frontend is running. So this is more of a " "proof of concept than anything." msgstr "" "Tenha sempre em mente que este não é um frontend muito seguro. Qualquer " "pessoa que tenha acesso ao computador quando está a ser configurado pode " "aceder ao servidor web e configurar coisas enquanto este frontend está em " "execução. Portanto isto é mais uma prova de concepção que outra coisa." #. type: Plain text #: debconf.7:133 #, no-wrap msgid "" "You can change the default frontend debconf uses by reconfiguring\n" "debconf. On the other hand, if you just want to change the frontend\n" "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n" "the name of the frontend to use. For example:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" msgstr "" "Você pode mudar o frontend predefinido que o debconf usa ao reconfigurar\n" "o debconf. Por outro lado, se apenas deseja mudar o frontend por um minuto,\n" "você pode definir a variável de ambiente DEBIAN_FRONTEND para o nome do\n" "frontend a usar. Por exemplo:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" #. type: Plain text #: debconf.7:141 msgid "" "The B(8) and B(8) commands also let " "you pass I<--frontend=> to them, followed by the frontend you want them to " "use." msgstr "" "Os comandos B(8) e B(8) também lhe " "permitem passar I<--frontend=> para eles, seguido do frontend que deseja que " "estes usem." #. type: Plain text #: debconf.7:145 msgid "" "Note that not all frontends will work in all circumstances. If a frontend " "fails to start up for some reason, debconf will print out a message " "explaining why, and fall back to the next-most similar frontend." msgstr "" "Note que nem todos os frontends irão funcionar em todas as circunstâncias, " "Se um frontend falhar ao arrancar por alguma razão, o debconf irá escrever " "uma mensagem a explicar porquê, e irá 'cair' para o frontend semelhante " "seguinte." #. type: SH #: debconf.7:145 #, no-wrap msgid "Priorities" msgstr "Propriedades" #. type: Plain text #: debconf.7:152 msgid "" "Another nice feature of debconf is that the questions it asks you are " "prioritized. If you don't want to be bothered about every little thing, you " "can set up debconf to only ask you the most important questions. On the " "other hand, if you are a control freak, you can make it show you all " "questions. Each question has a priority. In increasing order of importance:" msgstr "" "Outra funcionalidade agradável do debconf é que as perguntas que lhe faz são " "priorizadas. Se você não deseja ser incomodado com todos os pequenos " "detalhes, você pode configurar o debconf para apenas perguntar as questões " "mais importantes. Por outro lado, se você é um viciado em controle, pode " "fazê-lo mostrar todas as perguntas. Cada pergunta tem uma prioridade. A " "ordem de importância em sequência crescente:" #. type: TP #: debconf.7:152 debconf-devel.7:294 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:156 msgid "" "Very trivial questions that have defaults that will work in the vast " "majority of cases." msgstr "" "Questões muito triviais que têm predefinições que irão funcionar na vasta " "maioria dos casos." #. type: TP #: debconf.7:156 debconf-devel.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:159 msgid "Normal questions that have reasonable defaults." msgstr "Questões normais que têm predefinições razoáveis." #. type: TP #: debconf.7:159 debconf-devel.7:301 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:162 msgid "Questions that don't have a reasonable default." msgstr "Questões que não têm uma predefinição razoável." #. type: TP #: debconf.7:162 debconf-devel.7:304 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:165 msgid "Questions that you really, really need to see (or else)." msgstr "Questões que você precisa realmente de ver (ou então nada feito)." #. type: Plain text #: debconf.7:175 msgid "" "Only questions with a priority equal to or greater than the priority you " "choose will be shown to you. You can set the priority value by reconfiguring " "debconf, or temporarily by passing I<--priority=> followed by the value to " "the B(8) and B(8) commands, or by " "setting the DEBIAN_PRIORITY environment variable." msgstr "" "Apenas as questões com uma prioridade igual ou maior que a prioridade que " "escolheu lhe serão mostradas. Você pode definir o valor da prioridade ao " "reconfigurar o debconf, ou temporariamente passando I<--priority=> seguido " "do valor aos comandos B(8) e B(8), ou " "ao definir a variável de ambiente DEBIAN_PRIORITY." #. type: SH #: debconf.7:175 #, no-wrap msgid "Backend Database" msgstr "Base de Dados de Backend" #. type: Plain text #: debconf.7:187 msgid "" "Debconf uses a rather flexible and potentially complicated backend database " "for storing data such as the answers to questions. The file B is used to configure this database. If you need to set up something " "complicated, like make debconf read a remote database to get defaults, with " "local overrides, read the B(5) man page for all the gory " "details. Generally, the backend database is located in B ." msgstr "" "O debconf usa base de dados de backend muito flexível e potencialmente " "complicada para armazenar dados como as respostas às questões. O ficheiro B é usado para configurar esta base de dados. Se você " "precisar de definir algo complicado, como fazer o debconf ler uma base de " "dados remota para obter predefinições, com sobreposições locais, leia o " "manual B(5) para todos os detalhes mais chatos. Geralmente, a " "base de dados de backend está localizada em B." #. type: SH #: debconf.7:187 #, no-wrap msgid "Unattended Package Installation" msgstr "Instalação de Pacotes Não Acompanhada" #. type: Plain text #: debconf.7:194 msgid "" "If you have many machines to manage you will sometimes find yourself in the " "position of needing to perform an unattended installation or upgrade of " "packages on many systems, when the default answers to some configuration " "questions are not acceptable. There are many ways to approach this; all " "involve setting up a database and making debconf use it to get the answers " "you want." msgstr "" "Se você tem muitas máquinas para gerir irá por vezes deparar-se com a " "necessidade de executar uma instalação não acompanhada ou a actualização de " "pacotes em muitos sistemas, onde as respostas predefinidas de algumas " "perguntas de configuração não são aceitáveis. Há muitas maneiras de fazer " "isto; todas envolvem definir uma base de dados e fazer o debconf usá-la para " "obter as respostas que você quer." #. type: Plain text #: debconf.7:198 msgid "" "You should really read B(5) before this section, as you need " "to understand how debconf's databases work." msgstr "" "Você deveria mesmo ler B(5) antes desta secção, pois precisa " "de compreender como funcionam as bases de dados do debconf." #. type: Plain text #: debconf.7:205 msgid "" "The easiest way to set up the database is to install the packages on one " "machine and answer their questions as usual. Or you might just use B(8) to configure a set of packages without actually installing " "them. Or you might even decide to write a plain text debconf database by " "hand or something." msgstr "" "A maneira mais fácil de definir uma base de dados é instalar os pacotes em " "uma máquina e responder às suas perguntas como usualmente. Ou você pode usar " "B(8) para configurar um conjunto de pacotes sem realmente " "os instalar. Ou você pode até decidir escrever uma base de dados debconf em " "texto simples manualmente ou algo do género." #. type: Plain text #: debconf.7:209 msgid "" "Once you have the database, you need to figure out how to make the remote " "systems use it. This depends of course on the configuration of those systems " "and what database types they are set up to use." msgstr "" "Após ter a base de dados, você precisa descobrir como fazer os sistemas " "remotos usá-la. Isto claro que depende da configuração desses sistemas e " "quais são os tipos de bases de dados que eles têm definido para usar." #. type: Plain text #: debconf.7:213 msgid "" "If you are using the LDAP debconf database, an entire network of debian " "machines can also have any or all package installation questions answered " "automatically by a single LDAP server." msgstr "" "Se você está a usar uma base de dados debconf LDAP, uma rede inteira de " "máquinas debian podem ter as questões de instalação de qualquer ou todos os " "pacotes respondidas automaticamente por um único servidor LDAP." #. type: Plain text #: debconf.7:222 msgid "" "But perhaps you're using something a little bit easier to set up like, say, " "the default debconf database configuration, or you just don't want your " "remote systems to use LDAP all the time. In this case the best approach is " "to temporarily configure the remote systems to stack your database " "underneath their own existing databases, so they pull default values out of " "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and " "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample " "use:" msgstr "" "Mas talvez você esteja a usar algo um pouco mais fácil como, digamos, a " "configuração de base de dados debconf predefinida, ou você apenas não quer " "que os seus sistemas remotos usem LDAP a toda a hora. Neste caso a melhor " "aproximação é configurar temporariamente os sistemas remotos para empilhar a " "sua base de dados por baixo das já existentes e próprias bases de dados, " "para que puxem valores predefinidos dela. O debconf oferece duas variáveis " "de ambiente, DEBCONF_DB_FALLBACK e DEBCONF_DB_OVERRIDE, para tornar mais " "fácil fazer isto na hora. Aqui está um exemplo de utilização:" #. type: Plain text #: debconf.7:226 #, no-wrap msgid "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" msgstr "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" #. type: Plain text #: debconf.7:232 msgid "" "This makes the debconf on the remote host read in the data that is piped " "across the ssh connection and interpret it as a plain text format debconf " "database. It then uses that database as a fallback database -- a read-only " "database that is queried for answers to questions if the system's main " "debconf database lacks answers." msgstr "" "Isto faz com que o debconf na máquina remota leia os dados que são " "canalizados pela ligação ssh e os interprete como uma base de dados debconf " "em formato de texto. Depois usar essa base de dados como uma base de dados " "de reserva (fallback) -- uma base de dados só de leitura que é questionada " "por respostas a perguntas se a base de dados debconf principal do sistema " "não tiver as respostas." #. type: Plain text #: debconf.7:234 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:" msgstr "" "Aqui está outro modo de usar a variável de ambiente DEBCONF_DB_FALLBACK:" #. type: Plain text #: debconf.7:237 #, no-wrap msgid "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" msgstr "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" #. type: Plain text #: debconf.7:242 msgid "" "Here ssh is used to set up a tunneled LDAP connection and run debconf. " "Debconf is told to use the LDAP server as the fallback database. Note the " "use of \"{host:localhost}\" to configure how debconf accesses the LDAP " "database by providing the \"host\" field with a value of \"localhost\"." msgstr "" "Aqui é usado ssh para configurar uma ligação LDAP em túnel e correr o " "debconf. Ao debconf é dito para usar o servidor LDAP como base de dados " "fallback. Note o uso de \"{host:localhost}\" para configurar como o debconf " "acede à base de dados LDAP ao disponibilizar o campo \"host\" com um valor " "de \"localhost\"." #. type: Plain text #: debconf.7:244 msgid "Here's another method:" msgstr "Aqui está outro método:" #. type: Plain text #: debconf.7:247 #, no-wrap msgid "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" msgstr "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" #. type: Plain text #: debconf.7:252 msgid "" "Here you copy the database over with scp, and then ssh over and make debconf " "use the file you copied over. This illustrates a shorthand you can use in " "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it " "defaults to \"filename\"." msgstr "" "Aqui você copia a base de dados com scp, e depois usa ssh para fazer com que " "o debconf use o ficheiro que copiou. Isto ilustra um atalho que pode usar " "nos parâmetros DEBCONF_DB_FALLBACK -- se um nome de campo for deixado, usará " "por predefinição \"filename\"." #. type: Plain text #: debconf.7:261 msgid "" "There is only one problem with these uses of the DEBCONF_DB_FALLBACK " "parameter: While the fallback database can provide answers to questions the " "other debconf databases have never seen, it is only queried as a fallback; " "after the other databases. If you need to instead temporarily override an " "existing value on the remote host, you should instead use the " "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a " "temporary database, but this database is consulted before any others, and " "can be used to override existing values." msgstr "" "Há apenas um problema com estes usos do parâmetro DEBCONF_DB_FALLBACK. " "Enquanto a base de dados fallback pode disponibilizar respostas a questões " "que as outras bases de dados debconf nunca viram, é apenas questionada como " "uma reserva; depois das outras bases de dados. Se você precisa de sobrepor " "temporariamente um valor existente na máquina remota, deve usar a variável " "DEBCONF_DB_OVERRIDE em vez desta. Tal como DEBCONF_DB_FALLBACK, define uma " "base de dados temporária, mas esta base de dados é consultada antes das " "outras, e pode ser usada para sobrepor valores existentes." #. type: SH #: debconf.7:261 #, no-wrap msgid "Developing for Debconf" msgstr "Desenvolvendo para Debconf" #. type: Plain text #: debconf.7:266 msgid "" "Package developers and others who want to develop packages that use debconf " "should read B(7) ." msgstr "" "Programadores de pacotes e outros que desejam desenvolver pacotes que usam " "debconf devem ler B(7)." #. type: Plain text #: debconf.7:274 msgid "" "Briefly, debconf communicates with maintainer scripts or other programs via " "standard input and output, using a simple line-oriented command language " "similar to that used by common internet protocols such as SMTP. Programs use " "this protocol to ask debconf to display questions to the user, and retrieve " "the user's answers. The questions themselves are defined in a separate file, " "called the \"templates file\", which has a format not unlike a debian " "control file." msgstr "" "Resumindo, o debconf comunica com scripts do maintainer ou outros programas " "via entradas e saídas standard, usando uma simples linguagem de comandos " "orientada a linhas semelhante à usada por protocolos comuns de internet como " "o SMTP. Os programas usam este protocolo para pedir ao debconf para mostrar " "questões ao utilizador, e recolher as respostas dos utilizadores. As " "próprias questões são definidas num ficheiro separado, chamado o ficheiro " "\"templates\", o qual tem um formato não muito diferente de um ficheiro de " "controle debian." #. type: Plain text #: debconf.7:278 msgid "" "Debian packages which use debconf typically provide both a templates file " "and a \"config\" script (run to preconfigure the package) in the control " "metadata section of the package." msgstr "" "Os pacotes debian que usam debconf tipicamente disponibilizam ambos; um " "ficheiro de templates e um script de configuração (executado para pré-" "configurar o pacote) na secção de meta-dados de control do pacote." #. type: SH #: debconf.7:278 #, no-wrap msgid "ENVIRONMENT" msgstr "AMBIENTE" #. type: TP #: debconf.7:279 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:282 msgid "Used to temporarily change the frontend debconf uses. See above." msgstr "" "Usado para alterar temporariamente o frontend que o debconf usa. Veja em " "cima." #. type: TP #: debconf.7:282 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:286 msgid "" "Used to temporarily change the minimum priority of question debconf will " "display. See above." msgstr "" "Usado para alterar temporariamente a prioridade mínima das questões que o " "debconf irá mostrar. Veja em cima." #. type: TP #: debconf.7:286 debconf-devel.7:576 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:292 msgid "" "Turns on debugging output on standard error. May be set to a facility name " "or a regular expression which matches a facility name (such as '.*' to " "output all debug info). The facility names include:" msgstr "" "Liga a saída de depuração no erro standard. Pode ser definido para um nome " "de instituição ou uma expressão regular que corresponda a um nome de " "instituição (tal como '.*' para gerar toda a informação de depuração). Os " "nomes de instituições incluem:" #. type: TP #: debconf.7:292 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:295 msgid "Debugging info of interest to a debconf user." msgstr "Informação de depuração de interesse a um utilizador do debconf." #. type: TP #: debconf.7:295 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:298 msgid "Debugging info of interest to a package developer." msgstr "Informação de depuração de interesse para um programador de pacote." #. type: TP #: debconf.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:301 msgid "Debugging info about the backend database." msgstr "Informação de depuração acerca da base de dados backend." #. type: TP #: debconf.7:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:306 msgid "" "Set to \"yes\" to disable some warnings that debconf may display. Does not " "suppress display of fatal errors." msgstr "" "Definir para \"yes\" para desactivar alguns avisos que o debconf pode " "mostrar. Não suprime a exibição de erros fatais." #. type: TP #: debconf.7:306 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:310 msgid "" "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on " "the verbiage as much as possible." msgstr "" "Definir para \"yes\" para activar o modo \"terse\", no qual os frontends do " "debconf cortam na exibição de detalhes o máximo possível." #. type: TP #: debconf.7:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:320 msgid "" "Stack a database after the normally used databases, so that it is used as a " "fallback to get configuration information from. See \"Unattended Package " "Installation\" above. If the value of the variable is the name of an " "existing database in debconf.conf, then that database will be used. " "Otherwise, the environment variable can be used to configure a database on " "the fly, by telling the type of database, and optionally passing field:value " "settings, inside curly braces after the type. Spaces are used to separate " "fields, so you cannot specify a field value containing whitespace." msgstr "" "Empilha uma base de dados após as bases de dados normalmente usadas, para " "que a use como uma reserva de onde obter informação de configuração. Veja " "\"Instalação de Pacotes Não Acompanhada\" em cima. Se o valor da variável " "for o nome de uma base de dados existente em debconf.conf, então essa base " "de dados será usada. Caso contrário, a variável de ambiente pode ser usada " "para configurar uma base de dados na hora, ao dizer-lhe o tipo de base de " "dados, e passar opcionalmente definições de campo:valor, dentro de chavetas " "após o tipo. Os espaços são usados para separar os campos, portanto você não " "pode especificar um valor que tenha espaços em branco." #. type: Plain text #: debconf.7:323 #, no-wrap msgid "" "Thus, this uses the fallbackdb in debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" msgstr "" "Assim, isto usa o fallbackdb em debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" #. type: Plain text #: debconf.7:327 #, no-wrap msgid "" "While this sets up a new database of type File, and tells it a filename to\n" "use and turns off backups:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" msgstr "" "Enquanto isto define uma nova base de dados do tipo File, e diz-lhe um nome de\n" "ficheiro a usar e desliga os backups:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" #. type: Plain text #: debconf.7:330 #, no-wrap msgid "" "And as a shorthand, this sets up a database of type File with a filename:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" msgstr "" "E de forma abreviada, isto define uma base de dados do tipo File com um nome\n" "de ficheiro:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" #. type: Plain text #: debconf.7:333 msgid "" "Note that if a fallback database is set up on the fly, it will be read-only " "by default." msgstr "" "Note que se uma base de dados de emergência (fallback) for definida na hora, " "irá ficar em apenas-leitura por predefinição." #. type: TP #: debconf.7:333 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:338 msgid "" "Stack a database before the normally used databases, so that it can override " "values from them. The value of the variable works the same as does the value " "of DEBCONF_DB_FALLBACK." msgstr "" "Empilha uma base de dados antes das bases de dados usadas normalmente, para " "que possa sobrepor valores delas. O valor da variável funciona do mesmo modo " "que o valor de DEBCONF_DB_FALLBACK." #. type: TP #: debconf.7:338 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:343 msgid "" "Use a given database instead of the normally used databases. This may be " "useful for testing with a separate database without having to create a " "separate debconf.conf, or to avoid locking the normal databases." msgstr "" "Usa uma base de dados fornecida em vez das bases de dados normalmente " "usadas. isto pode ser útil para testes com uma base de dados separada sem " "ter que criar um debconf.conf separado, ou para evitar bloquear as bases de " "dados normais." #. type: TP #: debconf.7:343 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:349 msgid "" "If this environment variable is set, debconf will ignore a user's ~/." "debconfrc file, and use the system one instead. If it is set to the name of " "a regular file, debconf will use that file in preference to the system " "configuration files." msgstr "" "Se esta variável de ambiente estiver definida, o debconf irá ignorar o " "ficheiro ~/.debconfrc do utilizador, e em vez deste, usar o do sistema. Se " "estiver definida para o nome de um ficheiro regular, o debconf irá usar esse " "ficheiro em preferência dos ficheiros de configuração do sistema." #. type: TP #: debconf.7:349 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:353 msgid "" "If this environment variable is set, debconf will use dialog in preference " "to whiptail for the dialog frontend." msgstr "" "Se esta variável de ambiente estiver definida, o debconf irá usar o dialog " "em preferência do whiptail para o frontend do diálogo." #. type: TP #: debconf.7:353 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:357 msgid "" "If this environment variable is set, debconf will use Xdialog in preference " "to whiptail for the dialog frontend." msgstr "" "Se esta variável de ambiente estiver definida, o debconf irá usar o Xdialog " "em preferência do whiptail para o frontend de diálogo." #. type: TP #: debconf.7:357 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:361 msgid "" "Set to \"true\" to cause the seen flag to be set for questions asked in the " "noninteractive frontend." msgstr "" "Definido para \"true\" fará definir a bandeira \"visto\" nas perguntas " "feitas no frontend noninteractive." #. type: SH #: debconf.7:361 #, no-wrap msgid "BUGS" msgstr "BUGS" #. type: Plain text #: debconf.7:363 msgid "Probably quite a few, there's a lot of code here." msgstr "Provavelmente alguns, existe muito código aqui." #. type: Plain text #: debconf.7:365 msgid "" "If you do file a bug report, be sure to include the following information:" msgstr "" "Se você preencher um relatório de bug, certifique-se que inclui a seguinte " "informação:" #. type: TP #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484 #: debconf-devel.7:489 #, no-wrap msgid "B<*>" msgstr "B<*>" #. type: Plain text #: debconf.7:368 msgid "The debconf frontend you were using when the problem occurred" msgstr "O frontend do debconf que estava a usar quando o problema ocorreu" #. type: Plain text #: debconf.7:371 msgid "What you did to trigger the problem." msgstr "O que você fez para despoletar o problema." #. type: Plain text #: debconf.7:376 msgid "" "The full text of any error messages. If you can reproduce the bug, do so " "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot." msgstr "" "O texto completo de quaisquer mensagens de erro. Se você consegue reproduzir " "o bug, faça-o com DEBCONF_DEBUG='.*' definido e exportado. Isto acelera " "imenso a depuração." #. type: Plain text #: debconf.7:382 msgid "" "B(5), B(7), B(8), B(8), B(1)," msgstr "" "B(5), B(7), B(8), B(8), B(1)," #. type: TH #: debconf-devel.7:1 #, no-wrap msgid "DEBCONF-DEVEL" msgstr "DEBCONF-DEVEL" #. type: Plain text #: debconf-devel.7:4 msgid "debconf - developers guide" msgstr "debconf - guia de programadores" #. type: Plain text #: debconf-devel.7:6 msgid "This is a guide for developing packages that use debconf." msgstr "Isto é um guia para desenvolver pacotes que usam debconf." #. type: Plain text #: debconf-devel.7:9 msgid "" "This manual assumes that you are familiar with debconf as a user, and are " "familiar with the basics of debian package construction." msgstr "" "Este manual assume que você está familiarizado com o debconf como " "utilizador, e está familiarizado com as bases de construção de pacotes " "debian." #. type: Plain text #: debconf-devel.7:18 msgid "" "This manual begins by explaining two new files that are added to debian " "packages that use debconf. Then it explains how the debconf protocol works, " "and points you at some libraries that will let your programs speak the " "protocol. It discusses other maintainer scripts that debconf is typically " "used in: the postinst and postrm scripts. Then moves on to more advanced " "topics like shared debconf templates, debugging, and some common techniques " "and pitfalls of programming with debconf. It closes with a discussion of " "debconf's current shortcomings." msgstr "" "Este manual começa por explicar dois novos ficheiros que foram adicionados " "aos pacotes debian que usam debconf. Depois explica como funciona o " "protocolo debconf, e indica-lhe algumas bibliotecas que permitem que os seus " "programas falem o protocolo. Discute outros scripts de maintainer onde o " "debconf é tipicamente usado: os scripts postinst e postrm. Depois avança " "para tópicos mais avançados como templates debconf partilhados, depuração, e " "algumas técnicas comuns e armadilhas de programar com debconf. Termina com " "uma discussão das deficiências actuais do debconf." #. type: SH #: debconf-devel.7:18 #, no-wrap msgid "THE CONFIG SCRIPT" msgstr "O SCRIPT DE CONFIGURAÇÃO" #. type: Plain text #: debconf-devel.7:23 msgid "" "Debconf adds an additional maintainer script, the config script, to the set " "of maintainer scripts that can be in debian packages (the postinst, preinst, " "postrm, and prerm). The config script is responsible for asking any " "questions necessary to configure the package." msgstr "" "Debconf adiciona um script de maintainer adicional, o script config, ao " "conjunto de scripts do maintainer que podem existir nos pacotes debian (o " "postinst, preinst, postrm, e prerm). O script config é responsável por " "perguntar quaisquer questões necessárias à configuração do pacote." #. type: Plain text #: debconf-devel.7:28 msgid "" "Note: It is a little confusing that dpkg refers to running a package's " "postinst script as \"configuring\" the package, since a package that uses " "debconf is often fully pre-configured, by its config script, before the " "postinst ever runs. Oh well." msgstr "" "Nota: É um pouco confuso que o dpkg refira a correr o script postinst de um " "pacote como \"a configurar\" o pacote, porque o pacote que usa debconf é " "geralmente totalmente pré-configurado, pelo seu script config, antes do " "postinst correr. Pois é." #. type: Plain text #: debconf-devel.7:34 msgid "" "Like the postinst, the config script is passed two parameters when it is " "run. The first tells what action is being performed, and the second is the " "version of the package that is currently installed. So, like in a postinst, " "you can use dpkg --compare-versions on $2 to make some behavior happen only " "on upgrade from a particular version of a package, and things like that." msgstr "" "Como o postinst, ao script config são passados dois parâmetros quando é " "executado. O primeiro diz que acção é executada, e o segundo é a versão do " "pacote que está actualmente instalada. Portanto, como num postinst, você " "pode usar dpkg --compare-versions em $2 para fazer com que certo " "comportamento apenas aconteça na actualização de uma versão particular de um " "pacote, e coisas desse género." #. type: Plain text #: debconf-devel.7:36 msgid "The config script can be run in one of three ways:" msgstr "O script config pode ser executado em um de três modos:" #. type: TP #: debconf-devel.7:36 #, no-wrap msgid "B<1>" msgstr "B<1>" #. type: Plain text #: debconf-devel.7:40 msgid "" "If a package is pre-configured, with dpkg-preconfigure, its config script is " "run, and is passed the parameters \"configure\", and installed-version." msgstr "" "Se um pacote é pré-configurado com o dpkg-preconfigure, o seu script config " "é executado, e é lhe passado os parâmetros \"configure\" e installed-version." #. type: TP #: debconf-devel.7:40 #, no-wrap msgid "B<2>" msgstr "B<2>" #. type: Plain text #: debconf-devel.7:47 msgid "" "When a package's postinst is run, debconf will try to run the config script " "then too, and it will be passed the same parameters it was passed when it is " "pre-configured. This is necessary because the package might not have been " "pre-configured, and the config script still needs to get a chance to run. " "See HACKS for details." msgstr "" "Quando o postinst de um pacote é executado, o debconf irá tentar executar " "também o script config, e serão passados os mesmos parâmetros que foram " "passados quando foi pré-configurado. Isto é necessário porque o pacote pode " "não ter sido pré-configurado, e o script config ainda precise de uma chance " "para funcionar. Veja TRUQUES para mais detalhes." #. type: TP #: debconf-devel.7:47 #, no-wrap msgid "B<3>" msgstr "B<3>" #. type: Plain text #: debconf-devel.7:52 msgid "" "If a package is reconfigured, with dpkg-reconfigure, its config script it " "run, and is passed the parameters \"reconfigure\" and installed-version." msgstr "" "Se um pacote é reconfigurado com o dpkg-reconfigure, o seu script config é " "executado, e é lhe passado os parâmetros \"reconfigure\" e installed-version." #. type: Plain text #: debconf-devel.7:58 msgid "" "Note that since a typical package install or upgrade using apt runs steps 1 " "and 2, the config script will typically be run twice. It should do nothing " "the second time (to ask questions twice in a row is annoying), and it should " "definitely be idempotent. Luckily, debconf avoids repeating questions by " "default, so this is generally easy to accomplish." msgstr "" "Note que como uma instalação típica ou actualização de pacote usando apt " "corre em passos 1 e 2, tipicamente o script config será executado duas " "vezes. Não deverá fazer nada na segunda vez (fazer as mesmas perguntas duas " "vezes é aborrecido), e deverá definitivamente ser idempotente. Felizmente, o " "debconf evita repetir questões por predefinição, então isto é geralmente " "fácil de conseguir." #. type: Plain text #: debconf-devel.7:64 msgid "" "Note that the config script is run before the package is unpacked. It should " "only use commands that are in essential packages. The only dependency of " "your package that is guaranteed to be met when its config script is run is a " "dependency (possibly versioned) on debconf itself." msgstr "" "Note que o script config é executado antes do pacote ser desempacotado. " "Deverá apenas usar comandos que estão em pacotes essenciais. A única " "dependência do seu pacote que é garantido estar satisfeita quando o seu " "script config é executado é uma dependência do próprio debconf " "(possivelmente com uma versão específica)." #. type: Plain text #: debconf-devel.7:70 msgid "" "The config script should not need to modify the filesystem at all. It just " "examines the state of the system, and asks questions, and debconf stores the " "answers to be acted on later by the postinst script. Conversely, the " "postinst script should almost never use debconf to ask questions, but should " "instead act on the answers to questions asked by the config script." msgstr "" "O script config não deve necessitar de modificar o sistema de ficheiros. " "Apenas examina o estado do sistema, e faz perguntas, e o debconf armazena as " "respostas para serem actuadas mais tarde pelo script postinst. " "Reciprocamente, o script postinst não deve quase nunca usar o debconf para " "fazer perguntas, mas em vez disso deve actuar com as respostas às questões " "feitas pelo script config." #. type: SH #: debconf-devel.7:70 #, no-wrap msgid "THE TEMPLATES FILE" msgstr "O FICHEIRO TEMPLATES" #. type: Plain text #: debconf-devel.7:73 msgid "" "A package that uses debconf probably wants to ask some questions. These " "questions are stored, in template form, in the templates file." msgstr "" "Um pacote que usa debconf provavelmente vai querer perguntar algumas " "questões. Estas questões estão armazenadas, num formato de template, no " "ficheiro de templates." #. type: Plain text #: debconf-devel.7:78 msgid "" "Like the config script, the templates file is put in the control.tar.gz " "section of a deb. Its format is similar to a debian control file; a set of " "stanzas separated by blank lines, with each stanza having a RFC822-like form:" msgstr "" "Tal como o script config, o ficheiros templates é colocado na secção control." "tar.gz de um deb. O seu formato é semelhante a um ficheiro de controle " "debian; um conjunto de estrofes separadas por linhas vazias, com cada " "estrofe a ter um formato tipo RFC822:" #. type: Plain text #: debconf-devel.7:94 #, no-wrap msgid "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: This is a sample string question.\n" " This is its extended description.\n" " .\n" " Notice that:\n" " - Like in a debian package description, a dot\n" " on its own line sets off a new paragraph.\n" " - Most text is word-wrapped, but doubly-indented\n" " text is left alone, so you can use it for lists\n" " of items, like this list. Be careful, since\n" " it is not word-wrapped, if it's too wide\n" " it will look bad. Using it for short items\n" " is best (so this is a bad example).\n" msgstr "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: Isto é um exemplo de string de questão.\n" " Isto é a sua descrição extensa.\n" " .\n" " Note que:\n" " - Tal como na descrição dum pacote debian, um ponto\n" " isolado define um novo parágrafo.\n" " - A maioria do texto é arrumado por palavras, mas o texto\n" " duplamente indentado é deixado como está, portanto pode usá-lo para\n" " listas de itens, como esta. Tenha cuidado, como não\n" " é arrumado por palavras, se for muito longo\n" " vai ficar mal. É melhor usá-lo para itens curtos\n" " (portanto isto é um mau exemplo).\n" #. type: Plain text #: debconf-devel.7:99 #, no-wrap msgid "" " Template: foo/baz\n" " Type: boolean\n" " Description: Clear enough, no?\n" " This is another question, of boolean type.\n" msgstr "" " Template: foo/baz\n" " Type: boolean\n" " Description: Suficientemente claro, não?\n" " Isto é outra questão, de tipo booleano.\n" #. type: Plain text #: debconf-devel.7:103 msgid "" "For some real-life examples of templates files, see /var/lib/dpkg/info/" "debconf.templates, and other .templates files in that directory." msgstr "" "Para alguns exemplos reais de ficheiros templates, veja /var/lib/dpkg/info/" "debconf.templates, e outros ficheiros templates nesse directório." #. type: Plain text #: debconf-devel.7:105 msgid "Let's look at each of the fields in turn.." msgstr "Vamos observar cada um dos campos um de cada vez..." #. type: TP #: debconf-devel.7:105 #, no-wrap msgid "B