# Translation of debconf manpages to German # Copyright (C) Helge Kreutzmann , 2008, 2009, 2012, 2013, 2018. # Copyright (C) Florian 'eix' Rehnisch , 2008. # This file is distributed under the same license as the debconf package. # msgid "" msgstr "" "Project-Id-Version: debconf 1.5.84\n" "Report-Msgid-Bugs-To: debconf@packages.debian.org\n" "POT-Creation-Date: 2024-01-21 19:23+0000\n" "PO-Revision-Date: 2024-01-22 18:59+0100\n" "Last-Translator: Helge Kreutzmann \n" "Language-Team: de \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. type: SH #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3 #: ../../debconf-apt-progress:3 ../../debconf-escape:3 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2 #, no-wrap msgid "NAME" msgstr "NAME" #. type: textblock #: ../../debconf:5 msgid "debconf - run a debconf-using program" msgstr "debconf - führe ein Debconf-verwendendes Programm aus" #. type: SH #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7 #: ../../debconf-apt-progress:7 ../../debconf-escape:7 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7 #: debconf.conf.5:12 confmodule.3:4 #, no-wrap msgid "SYNOPSIS" msgstr "ÜBERSICHT" #. type: verbatim #: ../../debconf:11 #, no-wrap msgid "" " debconf [options] command [args]\n" "\n" msgstr "" " debconf [Optionen] Befehl [Argumente]\n" "\n" #. type: SH #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20 #: ../../debconf-apt-progress:15 ../../debconf-escape:12 #: ../../debconf-communicate:13 ../../debconf-copydb:30 #: ../../debconf-getlang:21 ../../debconf-get-selections:11 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21 #: ../../debconf-set-selections:12 ../../debconf-show:13 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4 #, no-wrap msgid "DESCRIPTION" msgstr "BESCHREIBUNG" #. type: textblock #: ../../debconf:15 msgid "" "Debconf is a configuration system for Debian packages. For a debconf " "overview and documentation for sysadmins, see L (in the debconf-" "doc package)." msgstr "" "Debconf ist ein Konfigurationssystem für Debian-Pakete. Lesen Sie " "L (im Paket debconf-doc) für einen Überblick und die " "Dokumentation von Debconf für Systemadministratoren." #. type: textblock #: ../../debconf:19 msgid "" "The B program runs a program under debconf's control, setting it up " "to talk with debconf on stdio. The program's output is expected to be " "debconf protocol commands, and it is expected to read result codes on stdin. " "See L for details about the debconf protocol." msgstr "" "Das Programm B führt ein Programm unter der Steuerung von Debconf " "aus und richtet es so ein, dass es via Stdio mit Debconf kommuniziert. Als " "Ausgabe des Programms werden Debconf-Protokoll-Befehle erwartet und es wird " "erwartet, dass es Codes via Stdin liest. Lesen Sie L für " "Details über das Debconf-Protokoll." #. type: textblock #: ../../debconf:24 msgid "" "The command to be run under debconf must be specified in a way that will let " "your PATH find it." msgstr "" "Der Befehl, der von Debconf ausgeführt werden soll, muss so angegeben " "werden, dass er in Ihrem PATH gefunden werden kann." #. type: textblock #: ../../debconf:27 msgid "" "This command is not the usual way that debconf is used. It's more typical " "for debconf to be used via L or L." msgstr "" "Dieser Befehl ist nicht die normale Art, Debconf zu verwenden. Für Debconf " "ist die Verwendung via L oder L " "typischer." #. type: =head1 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21 msgid "OPTIONS" msgstr "OPTIONEN" #. type: =item #: ../../debconf:34 msgid "B<-o>I, B<--owner=>I" msgstr "B<-o>I, B<--owner=>I" #. type: textblock #: ../../debconf:36 msgid "" "Tell debconf what package the command it is running is a part of. This is " "necessary to get ownership of registered questions right, and to support " "unregister and purge commands properly." msgstr "" "Teilt Debconf mit, zu welchem Paket der von Debconf ausgeführte Befehl " "gehört. Dies ist notwendig, um den Eigentümer von registrierten Fragen " "korrekt zu bestimmen und um die Befehle »unregister« und »purge« vernünftig " "zu unterstützen." #. type: =item #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25 msgid "B<-f>I, B<--frontend=>I" msgstr "B<-f>I, B<--frontend=>I" #. type: textblock #: ../../debconf:42 ../../dpkg-preconfigure:26 msgid "Select the frontend to use." msgstr "Wählt die zu verwendende Benutzerschnittstelle aus." #. type: =item #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36 msgid "B<-p>I, B<--priority=>I" msgstr "B<-p>I, B<--priority=>I" #. type: textblock #: ../../debconf:46 msgid "Specify the minimum priority of question that will be displayed." msgstr "Spezifiziert die minimale Priorität der Fragen, die angezeigt werden." #. type: =item #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42 msgid "B<--terse>" msgstr "B<--terse>" #. type: textblock #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44 msgid "Enables terse output mode. This affects only some frontends." msgstr "Aktiviert knappen Ausgabemodus. Dies betrifft nur einige Oberflächen." #. type: =head1 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75 #: ../../debconf-set-selections:47 msgid "EXAMPLES" msgstr "BEISPIELE" #. type: textblock #: ../../debconf:56 msgid "To debug a shell script that uses debconf, you might use:" msgstr "" "Um Fehler in einem Shell-Skript, das Debconf verwendet, zu finden, könnten " "Sie Folgendes verwenden:" #. type: verbatim #: ../../debconf:58 #, no-wrap msgid "" " DEBCONF_DEBUG=developer debconf my-shell-prog\n" "\n" msgstr "" " DEBCONF_DEBUG=developer debconf mein-Shell-Programm\n" "\n" #. type: textblock #: ../../debconf:60 msgid "Or, you might use this:" msgstr "Sie könnten auch das Folgende verwenden:" #. type: verbatim #: ../../debconf:62 #, no-wrap msgid "" " debconf --frontend=readline sh -x my-shell-prog\n" "\n" msgstr "" " debconf --frontend=readline sh -x mein-Shell-Programm\n" "\n" #. type: SH #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154 #: ../../debconf-escape:21 ../../debconf-communicate:39 #: ../../debconf-copydb:102 ../../debconf-getlang:74 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376 #: debconf-devel.7:958 #, no-wrap msgid "SEE ALSO" msgstr "SIEHE AUCH" #. type: textblock #: ../../debconf:66 msgid "L, L" msgstr "L, L" #. type: SH #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159 #: ../../debconf-escape:72 ../../debconf-communicate:74 #: ../../debconf-copydb:175 ../../debconf-getlang:256 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226 #: ../../debconf-show:152 ../../dpkg-preconfigure:258 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382 #: debconf-devel.7:968 #, no-wrap msgid "AUTHOR" msgstr "AUTOR" #. type: textblock #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76 #: ../../debconf-copydb:177 ../../debconf-getlang:258 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311 msgid "Joey Hess " msgstr "Joey Hess " #. type: textblock #: ../../Debconf/Client/ConfModule.pm:5 msgid "Debconf::Client::ConfModule - client module for ConfModules" msgstr "Debconf::Client::ConfModule - Client-Modul für ConfModules" #. type: verbatim #: ../../Debconf/Client/ConfModule.pm:9 #, no-wrap msgid "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Back button pressed.\n" " \t...\n" " }\n" " ...\n" "\n" msgstr "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Zurück-Knopf gedrückt.\n" " \t...\n" " }\n" " ...\n" "\n" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:22 msgid "" "This is a module to ease writing ConfModules for Debian's configuration " "management system. It can communicate with a FrontEnd via the debconf " "protocol (which is documented in full in the debconf_specification in Debian " "policy)." msgstr "" "Dies ist ein Modul, um das Schreiben von ConfModules für Debians " "Konfigurationsverwaltungsystem zu erleichtern. Es kann mit einer " "Benutzerschnittstelle über das Debconf-Protokoll (das komplett in der " "Debconf-Spezifikation in den Debian-Richtlinien beschrieben ist) " "kommunizieren." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:27 msgid "" "The design is that each command in the protocol is represented by one " "function in this module (with the name lower-cased). Call the function and " "pass in any parameters you want to follow the command. If the function is " "called in scalar context, it will return any textual return code. If it is " "called in list context, an array consisting of the numeric return code and " "the textual return code will be returned." msgstr "" "Vom Design her ist jeder Befehl im Protokoll durch eine Funktion in diesem " "Modul repräsentiert (wobei der Name in Kleinbuchstaben umgewandelt ist). " "Rufen Sie die Funktion auf und übergeben Sie die gewünschten Parameter, die " "dem Befehl folgen sollen. Falls die Funktion im skalaren Kontext aufgerufen " "wird, gibt sie einen Rückgabecode in Textform zurück. Falls Sie im Listen-" "Kontext aufgerufen wird, wird ein Feld bestehend aus dem numerischen " "Rückgabecode und dem Rückgabecode in Textform zurückgegeben." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:34 msgid "" "This module uses Exporter to export all functions it defines. To import " "everything, simply import \":all\"." msgstr "" "Dieses Modul verwendet Exporter, um alle von ihr definierten Funktionen zu " "exportieren. Um alles zu importieren, importieren Sie einfach »:all«." #. type: =item #: ../../Debconf/Client/ConfModule.pm:62 msgid "import" msgstr "import" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:64 msgid "" "Ensure that a FrontEnd is running. It's a little hackish. If " "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, " "one is started up automatically and stdin and out are connected to it. Note " "that this function is always run when the module is loaded in the usual way." msgstr "" "Stellt sicher, dass eine Benutzerschnittstelle läuft. Es ist ein kleiner " "Hack. Falls DEBIAN_HAS_FRONTEND gesetzt ist, wird angenommen, dass die " "Benutzerschnittstelle läuft. Falls nicht, wird eine automatisch gestartet " "und Standardeingabe und -ausgabe werden damit verbunden. Beachten Sie, dass " "diese Funktion immer ausgeführt wird, wenn das Modul auf dem normalen Weg " "geladen wird." #. type: =item #: ../../Debconf/Client/ConfModule.pm:95 msgid "stop" msgstr "stop" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:97 msgid "" "The frontend doesn't send a return code here, so we cannot try to read it or " "we'll block." msgstr "" "Die Benutzerschnittstelle sendet hier keinen Rückgabecode, daher können wir " "nicht versuchen, ihn zu lesen oder wir blockieren." #. type: =item #: ../../Debconf/Client/ConfModule.pm:107 msgid "AUTOLOAD" msgstr "AUTOLOAD" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:109 msgid "Creates handler functions for commands on the fly." msgstr "Erstellt Steuer-Funktionen für Befehle in situ." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:156 msgid "" "The debconf specification (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." msgstr "" "Die Debconf-Spezifikation (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." #. type: textblock #: ../../debconf-apt-progress:5 msgid "" "debconf-apt-progress - install packages using debconf to display a progress " "bar" msgstr "" "debconf-apt-progress - installiere Pakete mittels Debconf zur Anzeige eines " "Fortschrittsbalkens" #. type: verbatim #: ../../debconf-apt-progress:9 #, no-wrap msgid "" " debconf-apt-progress [--] command [args ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n" " debconf-apt-progress --stop\n" "\n" msgstr "" " debconf-apt-progress [--] Befehl [Argumente ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from Wegpunkt --to Wegpunkt [--] Befehl [Argumente ...]\n" " debconf-apt-progress --stop\n" "\n" #. type: textblock #: ../../debconf-apt-progress:17 msgid "" "B installs packages using debconf to display a " "progress bar. The given I should be any command-line apt frontend; " "specifically, it must send progress information to the file descriptor " "selected by the C configuration option, and must keep the " "file descriptors nominated by the C configuration option open " "when invoking debconf (directly or indirectly), as those file descriptors " "will be used for the debconf passthrough protocol." msgstr "" "B installiert Pakete und verwendet Debconf, um einen " "Fortschrittsbalken anzuzeigen. Der übergebene I sollte eine der " "Befehlszeilenschnittstellen von APT sein; insbesondere muss er " "Fortschrittsinformationen an den durch die Konfigurationsoption C ausgewählten Dateideskriptor senden und muss den durch die " "Konfigurationsoption C bestimmten Dateideskriptor beim Aufruf " "von Debconf (direkt oder indirekt) offen lassen, da diese Deskriptoren für " "das Debconf-Weiterleitungsprotokoll benutzt werden." #. type: textblock #: ../../debconf-apt-progress:25 msgid "" "The arguments to the command you supply should generally include B<-y> (for " "B or B) or similar to avoid the apt frontend prompting " "for input. B cannot do this itself because the " "appropriate argument may differ between apt frontends." msgstr "" "Die Argumente zum Befehl sollten im allgemeinen B<-y> (für B oder " "B) oder ähnliches enthalten, um die APT-Benutzerschnittstelle " "daran zu hindern, um Eingaben zu bitten. B kann dies " "nicht selbst erledigen, da das korrekte Argument bei verschiedenen APT-" "Benutzerschnittstellen verschieden sein kann." #. type: textblock #: ../../debconf-apt-progress:30 msgid "" "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to " "create a progress bar with multiple segments for different stages of " "installation, provided that the caller is a debconf confmodule. The caller " "may also interact with the progress bar itself using the debconf protocol if " "it so desires." msgstr "" "Die Optionen B<--start>, B<--stop>, B<--from> und B<--to> können zum " "Erstellen eines Fortschrittsbalkens mit mehreren Segmenten für verschiedene " "Stufen der Installation verwandt werden, vorausgesetzt dass der Aufrufende " "ein Debconf-Confmodule ist. Der Aufrufende darf mit dem Debconf-Protokoll " "auch mit dem Fortschrittsbalken selbst interagieren, falls er dies wünscht." #. type: textblock #: ../../debconf-apt-progress:36 msgid "" "debconf locks its config database when it starts up, which makes it " "unfortunately inconvenient to have one instance of debconf displaying the " "progress bar and another passing through questions from packages being " "installed. If you're using a multiple-segment progress bar, you'll need to " "eval the output of the B<--config> option before starting the debconf " "frontend to work around this. See L below." msgstr "" "Debconf sperrt seine Konfigurationsdatenbank beim Starten, wodurch es " "unpraktisch wird, eine Instanz zur Darstellung des Fortschrittsbalkens und " "eine andere zur Weitergabe der Fragen von zu-installierenden Paketen zu " "verwenden. Falls Sie einen Fortschrittsbalken mit mehreren Segmenten " "verwenden, müssen Sie die Ausgabe der Option B<--config> vor dem Starten der " "Debconf-Benutzerschnittstelle auswerten, um dies zu umgehen. Lesen Sie L unten." #. type: =item #: ../../debconf-apt-progress:47 msgid "B<--config>" msgstr "B<--config>" #. type: textblock #: ../../debconf-apt-progress:49 msgid "" "Print environment variables necessary to start up a progress bar frontend." msgstr "" "Gebe die notwendigen Variablen aus, um die Fortschrittsbalken-Schnittstelle " "zu starten." #. type: =item #: ../../debconf-apt-progress:51 msgid "B<--start>" msgstr "B<--start>" #. type: textblock #: ../../debconf-apt-progress:53 msgid "" "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and " "B<--to> to use other endpoints." msgstr "" "Beginne einen Fortschrittsbalken, standardmäßig von 0 bis 100. Verwenden Sie " "B<--from> und B<--to>, um andere Endpunkte zu benutzen." #. type: =item #: ../../debconf-apt-progress:56 msgid "B<--from> I" msgstr "B<--from> I" #. type: textblock #: ../../debconf-apt-progress:58 msgid "" "If used with B<--start>, make the progress bar begin at I rather " "than 0." msgstr "" "Falls mit B<--start> benutzt, wird der Fortschrittsbalken bei I " "statt bei 0 beginnen." #. type: textblock #: ../../debconf-apt-progress:61 msgid "" "Otherwise, install packages with their progress bar beginning at this " "\"waypoint\". Must be used with B<--to>." msgstr "" "Andernfalls installiere Pakete mit ihrem Fortschrittsbalken beginnend an " "diesem »Wegpunkt«. Muss mit B<--to> verwendet werden." #. type: =item #: ../../debconf-apt-progress:64 msgid "B<--to> I" msgstr "B<--to> I" #. type: textblock #: ../../debconf-apt-progress:66 msgid "" "If used with B<--start>, make the progress bar end at I rather " "than 100." msgstr "" "Falls mit B<--start> benutzt, wird der Fortschrittsbalken bei I " "statt bei 100 enden." #. type: textblock #: ../../debconf-apt-progress:69 msgid "" "Otherwise, install packages with their progress bar ending at this " "\"waypoint\". Must be used with B<--from>." msgstr "" "Andernfalls installiere Pakete mit ihrem Fortschrittsbalken an diesem " "»Wegpunkt« endend. Muss mit B<--from> verwendet werden." #. type: =item #: ../../debconf-apt-progress:72 msgid "B<--stop>" msgstr "B<--stop>" #. type: textblock #: ../../debconf-apt-progress:74 msgid "Stop a running progress bar." msgstr "Stoppt einen laufenden Fortschrittsbalken." #. type: =item #: ../../debconf-apt-progress:76 msgid "B<--no-progress>" msgstr "B<--no-progress>" #. type: textblock #: ../../debconf-apt-progress:78 msgid "" "Avoid starting, stopping, or stepping the progress bar. Progress messages " "from apt, media change events, and debconf questions will still be passed " "through to debconf." msgstr "" "Vermeide das Starten, Stoppen oder Fortschreiten des Fortschrittsbalkens. " "Fortschrittsnachrichten von APT, Meldungen über geänderte Medien und Fragen " "von Debconf werden noch an Debconf weitergegeben." #. type: =item #: ../../debconf-apt-progress:82 msgid "B<--dlwaypoint> I" msgstr "B<--dlwaypoint> I" #. type: textblock #: ../../debconf-apt-progress:84 msgid "" "Specify what percent of the progress bar to use for downloading packages. " "The remainder will be used for installing packages. The default is to use " "15% for downloading and the remaining 85% for installing." msgstr "" "Legt fest, welchen Prozentanteil des Fortschrittsbalkens zum Herunterladen " "von Paketen verwandt wird. Der Rest wird zur Installation von Paketen " "verwandt. Standardmäßig werden 15% zum Herunterladen und die verbleibenden " "85% für die Installation verwandt." #. type: =item #: ../../debconf-apt-progress:88 msgid "B<--logfile> I" msgstr "B<--logfile> I" #. type: textblock #: ../../debconf-apt-progress:90 msgid "Send the normal output from apt to the given file." msgstr "Schicke die normale Ausgabe von APT in die angegebene Datei." #. type: =item #: ../../debconf-apt-progress:92 msgid "B<--logstderr>" msgstr "B<--logstderr>" #. type: textblock #: ../../debconf-apt-progress:94 msgid "" "Send the normal output from apt to stderr. If you supply neither B<--" "logfile> nor B<--logstderr>, the normal output from apt will be discarded." msgstr "" "Schicke die normale Ausgabe von APT nach Stderr. Falls Sie weder die Option " "B<--logfile> noch B<--logstderr> verwenden, wird die normale Ausgabe von APT " "verworfen." #. type: =item #: ../../debconf-apt-progress:98 msgid "B<-->" msgstr "B<-->" #. type: textblock #: ../../debconf-apt-progress:100 msgid "" "Terminate options. Since you will normally need to give at least the B<-y> " "argument to the command being run, you will usually need to use B<--> to " "prevent that being interpreted as an option to B " "itself." msgstr "" "Beende Optionen. Da Sie normalerweise mindestens das Argument B<-y> an den " "ausgeführten Befehl übergeben müssen, werden Sie gewöhnlich B<--> verwenden " "müssen, um dessen Interpretation als Option für B " "selbst zu verhindern." #. type: textblock #: ../../debconf-apt-progress:109 msgid "" "Install the GNOME desktop and an X window system development environment " "within a progress bar:" msgstr "" "Installiere den GNOME-Desktop und eine X-Window-System-Entwicklungsumgebung " "mit einem Fortschrittsbalken:" #. type: verbatim #: ../../debconf-apt-progress:112 #, no-wrap msgid "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" msgstr "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" #. type: textblock #: ../../debconf-apt-progress:114 msgid "" "Install the GNOME, KDE, and XFCE desktops within a single progress bar, " "allocating 45% of the progress bar for each of GNOME and KDE and the " "remaining 10% for XFCE:" msgstr "" "Installiere die GNOME-, KDE- und XFCE-Desktops innerhalb eines einzigen " "Fortschrittsbalkens, wobei 45% des Fortschrittsbalkens jeweils für GNOME und " "KDE zugeordnet werden und die verbliebenen 10% für XFCE:" #. type: verbatim #: ../../debconf-apt-progress:118 #, no-wrap msgid "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" msgstr "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" #. type: =head1 #: ../../debconf-apt-progress:135 msgid "RETURN CODE" msgstr "RÜCKGABEWERT" #. type: textblock #: ../../debconf-apt-progress:137 msgid "" "The exit code of the specified command is returned, unless the user hit the " "cancel button on the progress bar. If the cancel button was hit, a value of " "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 " "will be returned." msgstr "" "Der Exit-Code des angegebenen Befehls wird zurückgegeben, falls der Benutzer " "nicht den Knopf »Abbrechen« beim Fortschrittsbalken gedrückt hat. Falls " "dieser Knopf gedrückt wurde, wird der Wert 30 zurückgegeben. Um " "Mehrdeutigkeiten zu vermeiden, wird ein Wert von 3 zurückgegeben, falls der " "Befehl 30 zurücklieferte." #. type: =head1 #: ../../debconf-apt-progress:654 msgid "AUTHORS" msgstr "AUTOREN" #. type: textblock #: ../../debconf-apt-progress:656 ../../debconf-escape:74 msgid "Colin Watson " msgstr "Colin Watson " #. type: textblock #: ../../debconf-escape:5 msgid "debconf-escape - helper when working with debconf's escape capability" msgstr "debconf-escape - Helfer beim Arbeiten mit Debconfs Schutz-Fähigkeit" #. type: verbatim #: ../../debconf-escape:9 #, no-wrap msgid "" " debconf-escape -e < unescaped-text\n" " debconf-escape -u < escaped-text\n" "\n" msgstr "" " debconf-escape -e < nicht-geschützter-text\n" " debconf-escape -u < geschützter-text\n" "\n" #. type: textblock #: ../../debconf-escape:14 msgid "" "When debconf has the 'escape' capability set, it will expect commands you " "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> " "respectively) and will in turn escape backslashes and newlines in its " "replies. This can be used, for example, to substitute multi-line strings " "into templates, or to get multi-line extended descriptions reliably using " "C." msgstr "" "Wenn bei Debconf die Fähigkeit »escape« gesetzt ist, erwartet es, dass in " "den ihm gesandten Befehlen Rückwärtsschrägstriche und Zeilenumbrüche " "geschützt sind (als C<\\\\> und C<\\n>, respektive) und schützt im Gegenzug " "Rückwärtsschrägstriche und Zeilenumbrüche in seinen Antworten. Dies kann zum " "Beispiel benutzt werden, um mehrzeilige Zeichenketten in Vorlagen zu " "transformieren, oder um mehrzeilige erweiterte Beschreibungen verlässlich " "durch die Benutzung von C zu erhalten." #. type: textblock #: ../../debconf-escape:23 msgid "L (available in the debconf-doc package)" msgstr "L (verfügbar im Paket debconf-doc)" #. type: textblock #: ../../debconf-communicate:5 msgid "debconf-communicate - communicate with debconf" msgstr "debconf-communicate - kommuniziere mit Debconf" #. type: verbatim #: ../../debconf-communicate:11 #, no-wrap msgid "" " echo commands | debconf-communicate [options] [package]\n" "\n" msgstr "" " echo Befehle | debconf-communicate [Optionen] [Paket]\n" "\n" #. type: textblock #: ../../debconf-communicate:15 msgid "" "B allows you to communicate with debconf on the fly, " "from the command line. The package argument is the name of the package which " "you are pretending to be as you communicate with debconf, and it may be " "omitted if you are lazy. It reads commands in the form used by the debconf " "protocol from stdin. For documentation on the available commands and their " "usage, see the debconf specification." msgstr "" "B erlaubt Ihnen, mit Debconf im Vorbeigehen zu " "kommunizieren, von der Befehlszeile. Das Argument I ist der Name des " "Pakets, welches Sie vorgeben zu sein, während Sie mit Debconf kommunizieren, " "und es darf weggelassen werden, falls Sie zu faul sind. Es liest Befehle in " "der vom Debconf-Protokoll verwendeten Form von der Standardeingabe. Für die " "Dokumentation der verfügbaren Befehle und ihren Gebrauch lesen Sie die " "Debconf-Spezifikation." #. type: textblock #: ../../debconf-communicate:22 msgid "" "The commands are executed in sequence. The textual return code of each is " "printed out to standard output." msgstr "" "Die Befehle werden sequenziell ausgeführt. Der wörtliche Rückgabewert eines " "jeden wird auf die Standardausgabe ausgegeben." #. type: textblock #: ../../debconf-communicate:25 msgid "" "The return value of this program is the numeric return code of the last " "executed command." msgstr "" "Der Rückgabewert dieses Programms ist der nummerische Rückgabewert des " "letzten ausgeführten Befehls." #. type: SH #: ../../debconf-communicate:28 debconf.conf.5:444 #, no-wrap msgid "EXAMPLE" msgstr "BEISPIEL" #. type: verbatim #: ../../debconf-communicate:30 #, no-wrap msgid "" " echo get debconf/frontend | debconf-communicate\n" "\n" msgstr "" " echo get debconf/frontend | debconf-communicate\n" "\n" #. type: textblock #: ../../debconf-communicate:32 msgid "Print out the value of the debconf/frontend question." msgstr "Gibt den Wert der Frage debconf/frontend aus." #. type: =head1 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25 #: ../../debconf-set-selections:20 msgid "WARNING" msgstr "WARNUNG" #. type: textblock #: ../../debconf-communicate:36 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging." msgstr "" "Dieses Programm sollte niemals von einem Betreuerskript eines Pakets " "verwendet werden, das Debconf verwendet! Es kann allerdings bei der " "Fehlersuche nützlich sein." #. type: textblock #: ../../debconf-communicate:41 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-copydb:5 msgid "debconf-copydb - copy a debconf database" msgstr "debconf-copydb - kopiere eine Debconf-Datenbank" #. type: verbatim #: ../../debconf-copydb:19 #, no-wrap msgid "" " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n" "\n" msgstr "" " debconf-copydb QuellDB ZielDB [--pattern=Muster] [--owner-pattern=Muster] [--config=Foo:bar]\n" "\n" #. type: textblock #: ../../debconf-copydb:32 msgid "" "B copies items from an existing debconf database into " "another, possibly new database. The two databases may have different " "formats; if so a conversion will automatically be done." msgstr "" "B kopiert Einträge aus einer existierenden Debconf-Datenbank " "in eine andere, möglicherweise neue Datenbank. Die zwei Datenbanken dürfen " "verschiedene Formate haben, in diesem Falle wird automatisch eine " "Konvertierung durchgeführt." #. type: =item #: ../../debconf-copydb:40 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:42 msgid "" "The name of the source database. Typically it will be defined in your " "debconf.conf (or .debconfrc) file." msgstr "" "Der Name der Quelldatenbank. Wird typischerweise in Ihrer debconf.conf- " "(oder .debconfrc-)Datei definiert." #. type: =item #: ../../debconf-copydb:45 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:47 msgid "" "The name of the destination database. It may be defined in debconf.conf or ." "debconfrc, or you might define it on the command line (see below)." msgstr "" "Der Name der Zieldatenbank. Sie kann in Ihrer debconf.conf oder .debconfrc " "definiert sein, oder Sie könnten sie auf der Kommandozeile definieren (siehe " "unten)." #. type: =item #: ../../debconf-copydb:51 msgid "B<-p> I, B<--pattern> I" msgstr "B<-p> I, B<--pattern> I" #. type: textblock #: ../../debconf-copydb:53 msgid "" "If this is specified, only items in I whose names match the " "pattern will be copied." msgstr "" "Falls dies angegeben ist, werden nur Einträge aus I kopiert, deren " "Namen auf Muster passen." #. type: =item #: ../../debconf-copydb:56 msgid "B<--owner-pattern> I" msgstr "B<--owner-pattern> I" #. type: textblock #: ../../debconf-copydb:58 msgid "" "If this is specified, only items in I whose owners match the " "pattern will be copied." msgstr "" "Falls dies angegeben ist, werden nur Einträge aus I kopiert, deren " "Eigentümer auf Muster passen." #. type: =item #: ../../debconf-copydb:61 msgid "B<-c> I, B<--config> I" msgstr "B<-c> I, B<--config> I" #. type: textblock #: ../../debconf-copydb:63 msgid "Set option Foo to bar. This is similar to writing:" msgstr "Setze Option Foo auf bar. Dies ist ähnlich zu Folgendem:" #. type: verbatim #: ../../debconf-copydb:65 #, no-wrap msgid "" " Foo: bar\n" "\n" msgstr "" " Foo: bar\n" "\n" # To Helge: quoting for the shell ;-) #. type: textblock #: ../../debconf-copydb:67 msgid "" "In debconf.conf, except you probably want to leave off the space on the " "command line (or quote it: \"Foo: bar\"). Generally must be used multiple " "times, to build up a full configuration stanza. While blank lines are used " "to separate stanzas in debconf.conf, this program will assume that \"Name:" "dbname\" denotes the beginning of a new stanza." msgstr "" "in debconf.conf, außer dass Sie möglicherweise das Leerzeichen auf der " "Befehlszeile auslassen (oder zitieren: \"Foo: bar\"). Muss generell mehrere " "Male benutzt werden, um einen vollen Konfigurations-Abschnitt zu formen. " "Während in der debconf.conf Leerzeilen benutzt werden, um Abschnitte zu " "trennen, nimmt dieses Programm an, dass »Name:dbname« den Beginn eines neuen " "Abschnittes anzeigt." #. type: verbatim #: ../../debconf-copydb:77 #, no-wrap msgid "" " debconf-copydb configdb backup\n" "\n" msgstr "" " debconf-copydb configdb backup\n" "\n" #. type: textblock #: ../../debconf-copydb:79 msgid "" "Copy all of configdb to backup, assuming you already have the backup " "database defined in debconf.conf." msgstr "" "Kopiere alles aus configdb nach backup, unter der Annahme, dass Sie die " "Datenbank backup bereits in der debconf.conf definiert haben." #. type: verbatim #: ../../debconf-copydb:82 #, no-wrap msgid "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" msgstr "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" #. type: textblock #: ../../debconf-copydb:86 msgid "" "Copy slrn's data out of configdb, and into newdb. newdb is not defined in " "the rc file, so the --config switches set up the database on the fly." msgstr "" "Kopiere slrn-bezogene Daten aus configdb nach newdb. newdb ist nicht in der " "rc-Datei definiert, so dass mit den Schaltern --config die Datenbank im " "Vorbeigehen aufgesetzt wird." #. type: verbatim #: ../../debconf-copydb:89 #, no-wrap msgid "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" msgstr "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" #. type: textblock #: ../../debconf-copydb:92 msgid "Spit out all the items in the debconf database related to package foo." msgstr "" "Gebe alle Einträge in der Debconf-Datenbank mit Bezug zum Paket foo aus." #. type: verbatim #: ../../debconf-copydb:94 #, no-wrap msgid "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" msgstr "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" #. type: textblock #: ../../debconf-copydb:99 msgid "" "This uses the special purpose pipe driver to copy a database to a remote " "system." msgstr "" "Dies benutzt den Pipe-Treiber für besondere Anlässe, um eine Datenbank auf " "ein anderes System zu kopieren." #. type: textblock #: ../../debconf-copydb:104 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-getlang:5 msgid "debconf-getlang - extract a language from a templates file" msgstr "debconf-getlang - extrahiere eine Sprache aus einer Vorlagendatei" #. type: verbatim #: ../../debconf-getlang:18 #, no-wrap msgid "" " debconf-getlang lang master [translation]\n" " debconf-getlang --stats master translation [...]\n" "\n" msgstr "" " debconf-getlang Sprache Hauptdatei [Übersetzung]\n" " debconf-getlang --stats Hauptdatei Übersetzung [...]\n" "\n" #. type: textblock #: ../../debconf-getlang:23 msgid "" "Note: This utility is deprecated; you should switch to using the po-debconf " "package." msgstr "" "Hinweis: Dieses Hilfswerkzeug ist veraltet. Sie sollten auf das Paket po-" "debconf umstellen." #. type: textblock #: ../../debconf-getlang:25 msgid "" "This program helps make and manage translations of debconf templates. There " "are basically three situations in which this program might be called:" msgstr "" "Dieses Programm hilft beim Erstellen und Verwalten von Übersetzungen von " "Debconf-Vorlagen. Es gibt im Prinzip drei Situationen, in denen dieses " "Programm aufgerufen werden könnte:" #. type: =item #: ../../debconf-getlang:30 msgid "A translation is just being started." msgstr "Eine Übersetzung wird gerade begonnen." #. type: textblock #: ../../debconf-getlang:32 msgid "" "You want to provide the translator with a file they can work on that has the " "English fields from your templates file, plus blank Field-ll fields for the " "target language that they can fill in." msgstr "" "Sie wollen die Übersetzerin mit einer Datei versorgen, mit der sie arbeiten " "kann, welche die englischen Felder aus Ihrer Vorlagen-Datei und leere Field-" "ll-Felder für die Zielsprache, die sie füllen kann, hat." #. type: textblock #: ../../debconf-getlang:36 msgid "" "To do this, run the program with first parameter being the code for the " "language that is being translated to, and the second parameter being the " "filename of the English templates file." msgstr "" "Um dies zu tun, starten Sie das Programm mit dem Code für die Sprache, in " "die übersetzt wird, als erstem Parameter, und dem Dateinamen der englischen " "Vorlagen-Datei als zweitem Parameter." #. type: =item #: ../../debconf-getlang:40 msgid "A translation is well under way." msgstr "Eine Übersetzung ist mitten in Arbeit." #. type: textblock #: ../../debconf-getlang:42 msgid "" "You have changed some English text, or added more items to your templates " "file, and you want to send the translators a file with the English text plus " "their current translations (or you are the translator, and you want to " "generate such a file for your own use)." msgstr "" "Sie haben etwas vom englischen Text geändert, oder Ihrer Vorlagen-Datei neue " "Elemente hinzugefügt, und Sie wollen der Übersetzerin eine Datei mit dem " "englischen Text und ihrer aktuellen Übersetzung zukommen lassen (oder Sie " "sind die Übersetzerin, und wollen solch eine Datei zu Ihrem eigenen Gebrauch " "generieren)." #. type: textblock #: ../../debconf-getlang:47 msgid "" "To accomplish this, run the program with the first parameter being the the " "code for the language that is being translated to, the second parameter " "being the filename of the master English templates file, and the third " "parameter being the filename of the current translated file." msgstr "" "Um dies zu vollbringen, führen Sie das Programm mit dem Code für die " "Sprache, in die übersetzt wird, als erstem Parameter, dem Dateinamen der " "englischen Vorlagen-Datei, dem »Master«, als zweitem Parameter, und dem " "Dateinamen der aktuellen übersetzten Datei als drittem Parameter aus." #. type: textblock #: ../../debconf-getlang:52 msgid "" "When run this way, the program is smart enough to notice fuzzy translations. " "For example a fuzzy Description will be output as Description--fuzzy, " "and a new, blank Description- will be added. Translators should " "remove the -fuzzy fields as they correct the fuzzy translations." msgstr "" "Wenn es auf diese Weise gestartet wird, ist das Programm klever genug, " "unscharfe Übersetzungen zu bemerken. Zum Beispiel wird eine unscharfe " "Beschreibung als »Description--fuzzy« ausgegeben, und ein neues, " "leeres »Description-« wird hinzugefügt. Die Übersetzerin sollte die " "Felder auf »-fuzzy« entfernen, während sie die unscharfen Übersetzungen " "korrigiert." #. type: =item #: ../../debconf-getlang:58 msgid "Checking the status of a translation" msgstr "Überprüfe den Status einer Übersetzung" #. type: textblock #: ../../debconf-getlang:60 msgid "" "To check the status of a translation, use the --status flag, and pass the " "english template file as the first parameter, and all the other translated " "templates after that. It will output statistics for each of them. For " "example:" msgstr "" "Benutzen Sie, um den Status einer Übersetzung zu überprüfen, den Schalter »--" "status«, und übergeben Sie die englische Vorlagen-Datei als den ersten " "Parameter, und die anderen übersetzten Vorlagen danach. Für jede von ihnen " "werden Statistiken ausgegeben. Zum Beispiel:" #. type: verbatim #: ../../debconf-getlang:65 #, no-wrap msgid "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" msgstr "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" #. type: =head1 #: ../../debconf-getlang:69 msgid "NOTE" msgstr "ANMERKUNG" #. type: textblock #: ../../debconf-getlang:71 msgid "" "Note that the text in the generated templates may be word-wrapped by debconf." msgstr "" "Beachten Sie, dass der Text in den generierten Vorlagen von Debconf " "wortweise umgebrochen werden darf." #. type: textblock #: ../../debconf-getlang:76 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-get-selections:5 msgid "debconf-get-selections - output contents of debconf database" msgstr "debconf-get-selections - gibt den Inhalt der Debconf-Datenbank aus" #. type: textblock #: ../../debconf-get-selections:9 msgid "debconf-get-selections [--installer]" msgstr "debconf-get-selections [--installer]" #. type: textblock #: ../../debconf-get-selections:13 msgid "" "Output the current debconf database in a format understandable by debconf-" "set-selections." msgstr "" "Gibt die aktuelle Debconf-Datenbank in einem Format aus, das von debconf-set-" "selections verstanden werden kann." #. type: textblock #: ../../debconf-get-selections:16 msgid "" "To dump the debconf database of the debian-installer, from /var/log/" "installer/cdebconf, use the --installer parameter." msgstr "" "Um die Debconf-Datenbank des Debian-Installer, aus /var/log/installer/" "cdebconf, auszugeben, benutzen Sie den Parameter »--installer«" #. type: textblock #: ../../debconf-get-selections:80 ../../debconf-set-selections:228 msgid "Petter Reinholdtsen " msgstr "Petter Reinholdtsen " #. type: textblock #: ../../debconf-loadtemplate:5 msgid "debconf-loadtemplate - load template file into debconf database" msgstr "" "debconf-loadtemplate - lade eine Vorlagen-Datei in die Debconf-Datenbank" #. type: verbatim #: ../../debconf-loadtemplate:16 #, no-wrap msgid "" " debconf-loadtemplate owner file [file ..]\n" "\n" msgstr "" " debconf-loadtemplate Eigentümer Datei [Datei ..]\n" "\n" #. type: textblock #: ../../debconf-loadtemplate:20 msgid "" "Loads one or more template files into the debconf database. The first " "parameter specifies the owner of the templates (typically, the owner is the " "name of a debian package). The remaining parameters are template files to " "load." msgstr "" "Lädt eine oder mehrere Vorlagen-Dateien in die Debconf-Datenbank. Der erste " "Parameter spezifiziert den Eigentümer der Vorlagen (typischerweise ist der " "Eigentümer der Name eines Debian-Pakets). Die verbleibenden Parameter sind " "die zu ladenden Vorlagen-Dateien." #. type: textblock #: ../../debconf-loadtemplate:27 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging, or to seed the debconf " "database." msgstr "" "Dieses Programm sollte nie aus einem Betreuer-Skript eines Debconf-" "benutzenden Paketes benutzt werden! Dennoch mag es bei der Fehlersuche oder " "beim Vorladen der Debconf-Datenbank nützlich sein." #. type: textblock #: ../../debconf-loadtemplate:33 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-mergetemplate:5 msgid "debconf-mergetemplate - merge together multiple debconf template files" msgstr "debconf-mergetemplate - füge mehrere Debconf-Vorlagen-Dateien zusammen" #. type: verbatim #: ../../debconf-mergetemplate:19 #, no-wrap msgid "" " debconf-mergetemplate [options] [templates.ll ...] templates\n" "\n" msgstr "" " debconf-mergetemplate [Optionen] [Vorlagen.ll ...] Vorlagen\n" "\n" #. type: textblock #: ../../debconf-mergetemplate:23 msgid "" "Note: This utility is deprecated. You should switch to using po-debconf's " "po2debconf program." msgstr "" "Hinweis: Dieses Hilfswerkzeug ist veraltet. Sie sollten auf die Verwendung " "des Programms po2debconf von Po-debconf umstellen." #. type: textblock #: ../../debconf-mergetemplate:26 msgid "" "This program is useful if you have multiple debconf templates files which " "you want to merge together into one big file. All the specified files will " "be read in, merged, and output to standard output." msgstr "" "Dieses Programm ist nützlich, falls Sie mehrere Debconf-Vorlage-Dateien " "haben, die Sie zu einer großen Datei zusammen fügen möchten. Alle " "angegebenen Dateien werden eingelesen, zusammengeführt und auf die " "Standardausgabe ausgegeben." #. type: textblock #: ../../debconf-mergetemplate:30 msgid "" "This can be especially useful if you are dealing with translated template " "files. In this case, you might have your main template file, plus several " "other files provided by the translators. These files will have translated " "fields in them, and maybe the translators left in the english versions of " "the fields they translated, for their reference." msgstr "" "Dies kann besonders nützlich sein, falls Sie mit übersetzten Vorlage-Dateien " "hantieren. In diesem Falle könnten Sie Ihre Haupt-Vorlage-Datei haben und " "mehrere andere Dateien, die Ihnen von den Übersetzerinnen zur Verfügung " "gestellt wurden. Diese Dateien enthalten übersetzte Felder und " "möglicherweise haben die Übersetzerinnen die englischen Versionen der Felder " "zu ihrer Referenz in den Dateien belassen." #. type: textblock #: ../../debconf-mergetemplate:36 msgid "" "So, you want to merge together all the translated templates files with your " "main templates file. Any fields that are unique to the translated files need " "to be added in to the correct templates, but any fields they have in common " "should be superseded by the fields in the main file (which might be more up-" "to-date)." msgstr "" "Also wollen Sie alle übersetzten Vorlage-Dateien mit Ihrer Haupt-Vorlage-" "Datei zusammenfügen. Jegliche Felder, die in den übersetzten Dateien " "eindeutig sind, müssen zu den richtigen Vorlagen hinzugefügt werden, aber " "jegliche Felder, die sie gemeinsam haben, sollten durch die Felder in der " "Haupt-Datei ersetzt werden (welche aktueller sein könnte)." #. type: textblock #: ../../debconf-mergetemplate:42 msgid "" "This program handles that case properly, just list each of the translated " "templates files, and then your main templates file last." msgstr "" "Dieses Programm behandelt diesen Fall korrekt. Führen Sie einfach jede der " "übersetzten Vorlagen-Dateien und dann als letzte Ihre Haupt-Vorlagen-Datei " "auf." #. type: =item #: ../../debconf-mergetemplate:49 msgid "--outdated" msgstr "--outdated" #. type: textblock #: ../../debconf-mergetemplate:51 msgid "" "Merge in even outdated translations. The default is to drop them with a " "warning message." msgstr "" "Füge selbst veraltete Übersetzungen ein. Voreinstellung ist, sie mit einer " "Warnmeldung zu verwerfen." #. type: =item #: ../../debconf-mergetemplate:54 msgid "--drop-old-templates" msgstr "--drop-old-templates" #. type: textblock #: ../../debconf-mergetemplate:56 msgid "" "If a translation has an entire template that is not in the master file (and " "thus is probably an old template), drop that entire template." msgstr "" "Falls eine Übersetzung eine vollständige Vorlage enthält, die nicht in der " "Master-Datei ist (und somit möglicherweise eine alte Vorlage ist), verwerfe " "die ganze Vorlage." #. type: textblock #: ../../debconf-mergetemplate:63 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-set-selections:5 msgid "debconf-set-selections - insert new values into the debconf database" msgstr "debconf-set-selections - füge neue Werte in die Debconf-Datenbank ein" #. type: verbatim #: ../../debconf-set-selections:9 #, no-wrap msgid "" " debconf-set-selections file\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" msgstr "" " debconf-set-selections Datei\n" " debconf-get-selections | ssh neuerhost debconf-set-selections\n" "\n" #. type: textblock #: ../../debconf-set-selections:14 msgid "" "B can be used to pre-seed the debconf database with " "answers, or to change answers in the database. Each question will be marked " "as seen to prevent debconf from asking the question interactively." msgstr "" "B kann benutzt werden, um die Debconf-Datenbank mit " "Antworten vorzuladen, oder um Antworten in der Datenbank zu ändern. Jede " "Frage wird als gesehen markiert, um zu vermeiden, dass Debconf sie " "interaktiv stellt." #. type: textblock #: ../../debconf-set-selections:18 msgid "Reads from a file if a filename is given, otherwise from stdin." msgstr "" "Liest aus einer Datei, falls ein Dateiname angegeben ist, ansonsten von der " "Standardeingabe." #. type: textblock #: ../../debconf-set-selections:22 msgid "" "Only use this command to seed debconf values for packages that will be or " "are installed. Otherwise you can end up with values in the database for " "uninstalled packages that will not go away, or with worse problems involving " "shared values. It is recommended that this only be used to seed the database " "if the originating machine has an identical install." msgstr "" "Benutzen Sie diesen Befehl nur, um Debconf-Werte für Pakete, die installiert " "sind oder werden sollen, zu laden. Ansonsten kommen Sie dahin, dass Sie " "Werte für nicht-installierte Pakete haben, die nicht verschwinden, oder zu " "schlimmeren Problemen, die gemeinsam benutzte Werte betreffen. Es empfiehlt " "sich, dass dies nur zum Laden der Datenbank benutzt wird, falls die " "ursprüngliche Maschine eine identische Installation hat." #. type: =head1 #: ../../debconf-set-selections:28 msgid "DATA FORMAT" msgstr "DATENFORMAT" # FIXME Double space #. type: textblock #: ../../debconf-set-selections:30 msgid "" "The data is a series of lines. Lines beginning with a # character are " "comments. Blank lines are ignored. All other lines set the value of one " "question, and should contain four values, each separated by one character of " "whitespace. The first value is the name of the package that owns the " "question. The second is the name of the question, the third value is the " "type of this question, and the fourth value (through the end of the line) " "is the value to use for the answer of the question." msgstr "" "Die Daten sind eine Folge von Zeilen. Zeilen, die mit dem Zeichen »#« " "beginnen, sind Kommentare. Leerzeilen werden ignoriert. Alle anderen Zeilen " "setzen den Wert einer Frage, und sollten vier jeweils durch ein Leerzeichen " "getrennte Werte enthalten. Der erste Wert ist der Name des Pakets, dem die " "Frage gehört. Der zweite ist der Name der Frage, der dritte ist der Typ " "dieser Frage, und der vierte Wert (bis zum Zeilenende) ist der Wert, der als " "Antwort auf die Frage zu benutzen ist." #. type: textblock #: ../../debconf-set-selections:38 msgid "" "Alternatively, the third value can be \"seen\"; then the preseed line only " "controls whether the question is marked as seen in debconf's database. Note " "that preseeding a question's value defaults to marking that question as " "seen, so to override the default value without marking a question seen, you " "need two lines." msgstr "" "Alternativ kann der dritte Wert »seen« (gesehen) sein; dann kontrolliert die " "Vorladezeile nur, ob die Frage in Debconfs Datenbank als gesehen markiert " "wird. Beachten Sie, dass das Vorladen des Werts für eine Frage diese als " "gesehen markiert, also brauchen Sie, um den Vorgabewert einer Frage zu " "überschreiben, ohne diese Frage als gesehen zu markieren, zwei Zeilen." #. type: textblock #: ../../debconf-set-selections:44 msgid "" "Lines can be continued to the next line by ending them with a \"\\\" " "character." msgstr "" "Zeilenfortsetzung kann benutzt werden, indem man die erste Zeile mit einem " "Rückwärtsschrägstrich (\\) enden lässt." #. type: verbatim #: ../../debconf-set-selections:49 #, no-wrap msgid "" " # Force debconf priority to critical.\n" " debconf debconf/priority select critical\n" "\n" msgstr "" " # Erzwinge Debconf-Priority kritisch.\n" " debconf debconf/priority select critical\n" "\n" #. type: verbatim #: ../../debconf-set-selections:52 #, no-wrap msgid "" " # Override default frontend to readline, but allow user to select.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" msgstr "" " # Ändere Vorgabe für Benutzerschnittstelle auf Readline, aber erlaube Benutzer auszuwählen\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" #. type: =item #: ../../debconf-set-selections:60 msgid "B<--verbose>, B<-v>" msgstr "B<--verbose>, B<-v>" #. type: textblock #: ../../debconf-set-selections:62 msgid "verbose output" msgstr "wortreiche Ausgabe" #. type: =item #: ../../debconf-set-selections:64 msgid "B<--checkonly>, B<-c>" msgstr "B<--checkonly>, B<-c>" #. type: textblock #: ../../debconf-set-selections:66 msgid "only check the input file format, do not save changes to database" msgstr "" "Prüfe nur das Format der Eingabedatei, schreibe keine Änderungen in die " "Datenbank." #. type: textblock #: ../../debconf-set-selections:72 msgid "L (available in the debconf-utils package)" msgstr "L (verfügbar im Paket debconf-utils)" #. type: textblock #: ../../debconf-show:5 msgid "debconf-show - query the debconf database" msgstr "debconf-show - frage die Debconf-Datenbank ab" #. type: verbatim #: ../../debconf-show:9 #, no-wrap msgid "" " debconf-show packagename [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" msgstr "" " debconf-show paketname [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" #. type: textblock #: ../../debconf-show:15 msgid "B lets you query the debconf database in different ways." msgstr "" "B lässt Sie die Debconf-Datenbank auf verschiedene Arten " "abfragen." #. type: textblock #: ../../debconf-show:17 msgid "" "The most common use is \"debconf-show packagename\", which displays all " "items in the debconf database owned by a given package, and their current " "values. Questions that have been asked already are prefixed with an '*'." msgstr "" "Der gewöhnlichste Aufruf ist »debconf-show Paketname«, welcher alle vom " "angegebenen Paket besessenen Elemente in der Debconf-Datenbank und ihre " "aktuellen Werte anzeigt. Bereits gestellten Fragen wird ein »*« " "vorangestellt." #. type: textblock #: ../../debconf-show:21 msgid "" "This can be useful as a debugging aid, and especially handy in bug reports " "involving a package's use of debconf." msgstr "" "Dies kann als Hilfe zur Fehlersuche nützlich sein, und besonders bei " "Fehlerberichten, die die Nutzung von Debconf durch ein Paket betreffen." #. type: =item #: ../../debconf-show:28 msgid "B<--db=>I" msgstr "B<--db=>I" #. type: textblock #: ../../debconf-show:30 msgid "" "Specify the database to query. By default, debconf-show queries the main " "database." msgstr "" "Gibt an, welche Datenbank abgefragt wird. Als Voreinstellung fragt B die Haupt-Datenbank (main) ab." #. type: =item #: ../../debconf-show:33 msgid "B<--listowners>" msgstr "B<--listowners>" #. type: textblock #: ../../debconf-show:35 msgid "" "Lists all owners of questions in the database. Generally an owner is " "equivalent to a debian package name." msgstr "" "Listet alle Eigentümer von Fragen in der Datenbank. Generell ist ein " "Eigentümer äquivalent zu einem Namen eines Debian-Paketes." #. type: =item #: ../../debconf-show:38 msgid "B<--listdbs>" msgstr "B<--listdbs>" #. type: textblock #: ../../debconf-show:40 msgid "Lists all available databases." msgstr "Listet alle verfügbaren Datenbanken." #. type: textblock #: ../../debconf-show:154 msgid "Joey Hess and Sylvain Ferriol" msgstr "Joey Hess und Sylvain Ferriol" #. type: textblock #: ../../dpkg-preconfigure:5 msgid "" "dpkg-preconfigure - let packages ask questions prior to their installation" msgstr "dpkg-preconfigure - lässt Pakete vor ihrer Installation Fragen stellen" #. type: verbatim #: ../../dpkg-preconfigure:9 #, no-wrap msgid "" " dpkg-preconfigure [options] package.deb\n" "\n" msgstr "" " dpkg-preconfigure [optionen] paket.deb\n" "\n" #. type: verbatim #: ../../dpkg-preconfigure:11 #, no-wrap msgid "" " dpkg-preconfigure --apt\n" "\n" msgstr "" " dpkg-preconfigure --apt\n" "\n" #. type: textblock #: ../../dpkg-preconfigure:15 msgid "" "B lets packages ask questions before they are installed. " "It operates on a set of debian packages, and all packages that use debconf " "will have their config script run so they can examine the system and ask " "questions." msgstr "" "B lässt Pakete Fragen stellen, bevor sie installiert " "werden. Es arbeitet auf einem Satz von Debian-Paketen, und von allen " "Paketen, die Debconf benutzen, wird das Skript »config« ausgeführt, so dass " "sie das System examinieren und Fragen stellen können." #. type: textblock #: ../../dpkg-preconfigure:30 msgid "" "Set the lowest priority of questions you are interested in. Any questions " "with a priority below the selected priority will be ignored and their " "default answers will be used." msgstr "" "Setzt Sie die niedrigste Frage-Priorität, an der Sie interessiert sind. " "Jegliche Fragen mit einer Priorität unterhalb der gewählten Priorität werden " "ignoriert und deren Vorgabewerte werden benutzt." #. type: =item #: ../../dpkg-preconfigure:38 msgid "B<--apt>" msgstr "B<--apt>" #. type: textblock #: ../../dpkg-preconfigure:40 msgid "" "Run in apt mode. It will expect to read a set of package filenames from " "stdin, rather than getting them as parameters. Typically this is used to " "make apt run dpkg-preconfigure on all packages before they are installed. " "To do this, add something like this to /etc/apt/apt.conf:" msgstr "" "Arbeite im APT-Modus. Dieser erwartet eine Folge von Dateinamen von Paketen " "auf der Standardeingabe, statt sie als Parameter übergeben zu bekommen. " "Typischerweise wird dies benutzt, um APT B für alle " "Pakete laufen zu lassen, bevor sie installiert werden. Um dies zu tun, fügen " "Sie etwas wie das Folgende in die /etc/apt/apt.conf ein:" #. type: verbatim #: ../../dpkg-preconfigure:45 #, no-wrap msgid "" " // Pre-configure all packages before\n" " // they are installed.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" msgstr "" " // Vor-Konfigurieren aller Pakete bevor\n" " // sie installiert werden.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" #. type: =item #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69 msgid "B<-h>, B<--help>" msgstr "B<-h>, B<--help>" #. type: textblock #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71 msgid "Display usage help." msgstr "Zeige Hilfe zur Benutzung an." #. type: textblock #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79 msgid "L" msgstr "L" #. type: textblock #: ../../dpkg-reconfigure:5 msgid "dpkg-reconfigure - reconfigure an already installed package" msgstr "dpkg-reconfigure - rekonfiguriere ein bereits installiertes Paket" #. type: verbatim #: ../../dpkg-reconfigure:9 #, no-wrap msgid "" " dpkg-reconfigure [options] packages\n" "\n" msgstr "" " dpkg-reconfigure [Optionen] Pakete\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:13 msgid "" "B reconfigures packages after they have already been " "installed. Pass it the names of a package or packages to reconfigure. It " "will ask configuration questions, much like when the package was first " "installed." msgstr "" "B konfiguriert Pakete erneut, nachdem sie bereits " "installiert wurden. Übergeben Sie ihm den oder die Namen des oder der " "Pakete, die erneut konfiguriert werden sollen. Es stellt dann " "Konfigurationsfragen, so ähnlich wie bei der Installation des Pakets." #. type: textblock #: ../../dpkg-reconfigure:18 msgid "" "If you just want to see the current configuration of a package, see " "L instead." msgstr "" "Falls Sie nur die aktuelle Konfiguration eines Paketes anschauen wollen, " "lesen Sie stattdessen L." #. type: textblock #: ../../dpkg-reconfigure:27 msgid "" "Select the frontend to use. The default frontend can be permanently changed " "by:" msgstr "" "Wählt die zu benutzende Benutzerschnittstelle. Die standardmäßige " "Schnittstelle kann durch das Folgende dauerhaft geändert werden:" #. type: verbatim #: ../../dpkg-reconfigure:30 #, no-wrap msgid "" " dpkg-reconfigure debconf\n" "\n" msgstr "" " dpkg-reconfigure debconf\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:32 msgid "" "Note that if you normally have debconf set to use the noninteractive " "frontend, dpkg-reconfigure will use the dialog frontend instead, so you " "actually get to reconfigure the package." msgstr "" "Beachten Sie, dass, falls Sie normalerweise Debconf die nicht-interaktive " "Schnittstelle benutzen lassen, B hier stattdessen die " "Benutzerschnittstelle Dialog benutzt, so dass Sie tatsächlich dazu kommen, " "das Paket erneut zu konfigurieren." #. type: textblock #: ../../dpkg-reconfigure:38 msgid "" "Specify the minimum priority of question that will be displayed. dpkg-" "reconfigure normally shows low priority questions no matter what your " "default priority is. See L for a list." msgstr "" "Gibt die Schwell-Priorität für Fragen an, die angezeigt werden sollen. " "B zeigt normalerweise Fragen mit niedriger Priorität an, " "egal was Ihre voreingestellte Priorität ist. Siehe L für eine " "Liste." #. type: =item #: ../../dpkg-reconfigure:46 msgid "B<--default-priority>" msgstr "B<--default-priority>" #. type: textblock #: ../../dpkg-reconfigure:48 msgid "" "Use whatever the default priority of question is, instead of forcing the " "priority to low." msgstr "" "Benutze was immer die voreingestellte Priorität für Fragen ist, statt die " "niedrige Priorität (low) zu erzwingen." #. type: =item #: ../../dpkg-reconfigure:51 msgid "B<-u>, B<--unseen-only>" msgstr "B<-u>, B<--unseen-only>" #. type: textblock #: ../../dpkg-reconfigure:53 msgid "" "By default, all questions are shown, even if they have already been " "answered. If this parameter is set though, only questions that have not yet " "been seen will be asked." msgstr "" "Standardmäßig werden alle Fragen angezeigt, selbst wenn sie schon " "beantwortet wurden. Falls dieser Parameter aber gesetzt ist, werden nur die " "Fragen gestellt, die noch nicht gesehen wurden." #. type: =item #: ../../dpkg-reconfigure:57 msgid "B<--force>" msgstr "B<--force>" #. type: textblock #: ../../dpkg-reconfigure:59 msgid "" "Force dpkg-reconfigure to reconfigure a package even if the package is in an " "inconsistent or broken state. Use with caution." msgstr "" "Zwinge B ein Paket erneut zu konfigurieren, selbst wenn es " "in einem inkonsistenten oder defekten Zustand ist. Mit Vorsicht zu benutzen." #. type: =item #: ../../dpkg-reconfigure:62 msgid "B<--no-reload>" msgstr "B<--no-reload>" #. type: textblock #: ../../dpkg-reconfigure:64 msgid "" "Prevent dpkg-reconfigure from reloading templates. Use with caution; this " "will prevent dpkg-reconfigure from repairing broken templates databases. " "However, it may be useful in constrained environments where rewriting the " "templates database is expensive." msgstr "" "Vermeidet, dass B Vorlagen erneut lädt. Mit Vorsicht zu " "benutzen; dies vermeidet, dass B defekte Vorlage-" "Datenbanken repariert. Es kann aber in eingeschränkten Umgebungen nützlich " "sein, wo das erneute Schreiben der Vorlage-Datenbank teuer ist." #. type: TH #: debconf.conf.5:1 #, no-wrap msgid "DEBCONF.CONF" msgstr "DEBCONF.CONF" #. type: Plain text #: debconf.conf.5:4 msgid "debconf.conf - debconf configuration file" msgstr "debconf.conf - Konfigurations-Datei für Debconf" #. type: Plain text #: debconf.conf.5:12 msgid "" "Debconf is a configuration system for Debian packages. /etc/debconf.conf and " "~/.debconfrc are configuration files debconf uses to determine which " "databases it should use. These databases are used for storing two types of " "information; dynamic config data the user enters into it, and static " "template data. Debconf offers a flexible, extensible database backend. New " "drivers can be created with a minimum of effort, and sets of drivers can be " "combined in various ways." msgstr "" "Debconf ist ein Konfigurationssystem für Debian-Pakete. /etc/debconf.conf " "und ~/.debconfrc sind Konfigurationsdateien, die Debconf benutzt, um " "herauszufinden, welche Datenbanken es benutzen soll. Diese Datenbanken " "werden für das Speichern von zwei Arten von Informationen benutzt; " "dynamische Konfigurationsdaten, die der Benutzer eingibt, und statische " "Vorlagendaten. Debconf bietet ein flexibles, erweiterbares Datenbanken-" "Backend. Neue Treiber können mit minimalem Aufwand erzeugt werden, und " "Treiber-Sätze können auf verschiedene Weise kombiniert werden." #. type: Plain text #: debconf.conf.5:17 #, no-wrap msgid "" " # This is a sample config file that is\n" " # sufficient to use debconf.\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" " # Dies ist eine einfache Konfigurationsdatei,\n" " # die ausreichend ist, um Debconf zu benutzen\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:21 #, no-wrap msgid "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" #. type: Plain text #: debconf.conf.5:26 #, no-wrap msgid "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" msgstr "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" #. type: SH #: debconf.conf.5:26 #, no-wrap msgid "FILE FORMAT" msgstr "DATEIFORMAT" #. type: Plain text #: debconf.conf.5:30 msgid "" "The format of this file is a series of stanzas, each separated by at least " "one wholly blank line. Comment lines beginning with a \"#\" character are " "ignored." msgstr "" "Das Format dieser Datei ist eine Folge von Absätzen, jeweils getrennt durch " "mindestens eine vollständig leere Zeile. Kommentarzeilen, die mit dem " "Zeichen »#« beginnen, werden ignoriert." #. type: Plain text #: debconf.conf.5:33 msgid "" "The first stanza of the file is special, is used to configure debconf as a " "whole. Two fields are required to be in this first stanza:" msgstr "" "Der erste Absatz der Datei ist besonders, er wird benutzt, um Debconf im " "Ganzen zu konfigurieren. Zwei Felder sind in diesem ersten Absatz " "erforderlich:" #. type: TP #: debconf.conf.5:34 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:37 msgid "Specifies the name of the database from which to load config data." msgstr "" "Gibt den Namen der Datenbank an, aus der die Konfigurationsdaten geladen " "werden." #. type: TP #: debconf.conf.5:37 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:40 msgid "Specifies the name of the database to use for the template cache." msgstr "" "Gibt den Namen der Datenbank an, die für das Zwischenspeichern von Vorlagen " "zu benutzen ist." #. type: Plain text #: debconf.conf.5:43 msgid "Additional fields that can be used include:" msgstr "Zusätzliche Felder, die benutzt werden können, schließen ein:" #. type: TP #: debconf.conf.5:44 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:48 msgid "" "The frontend Debconf should use, overriding any frontend set in the debconf " "database." msgstr "" "Die Benutzerschnittstelle, die Debconf benutzen soll, dies überstimmt jede " "Schnittstellen-Einstellung in der Debconf-Datenbank." #. type: TP #: debconf.conf.5:48 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:52 msgid "" "The priority Debconf should use, overriding any priority set in the debconf " "database." msgstr "" "Die Priorität, die Debconf benutzen soll, dies überstimmt jede " "Prioritätseinstellung in der Debconf-Datenbank." #. type: TP #: debconf.conf.5:52 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:59 msgid "" "The email address Debconf should send mail to if it needs to make sure that " "the admin has seen an important message. Defaults to \"root\", but can be " "set to any valid email address to send the mail there. If you prefer to " "never have debconf send you mail, specify a blank address. This can be " "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable." msgstr "" "Die E-Mail-Adressen, an die Debconf E-Mail schicken soll, falls " "sichergestellt werden muss, dass der Administrator eine wichtige Nachricht " "gesehen hat. Standardmäßig »root«, dies kann auf jede gültige E-Mail-Adresse " "gesetzt werden, um die E-Mail dorthin zu schicken. Dies kann im Vorbeigehen " "durch die Umgebungsvariable DEBCONF_ADMIN_EMAIL überstimmt werden." #. type: Plain text #: debconf.conf.5:59 debconf.conf.5:395 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:67 msgid "" "If set, this will cause debconf to output debugging information to standard " "error. The value it is set to can be something like \"user\", \"developer\", " "\"db\", or a regular expression. Typically, rather than setting it " "permanently in a config file, you will only want to temporarily turn on " "debugging, and the DEBCONF_DEBUG environment variable can be set instead to " "accomplish that." msgstr "" "Falls gesetzt, lässt dies Debconf Informationen zur Fehlersuche auf die " "Standardfehlerausgabe ausgeben. Der Wert, auf den dies gesetzt wird, kann so " "etwas wie »user«, »developer«, »db« oder ein regulärer Ausdruck sein. " "Typischerweise, statt es permanent in einer Konfigurationsdatei zu setzen, " "wollen Sie die Fehlersuche nur zeitweise anstellen, und die " "Umgebungsvariable DEBCONF_DEBUG kann stattdessen gesetzt werden, um dies zu " "bewerkstelligen." #. type: TP #: debconf.conf.5:67 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:72 msgid "" "If set, this will make debconf not display warnings about various things. " "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment " "variable." msgstr "" "Falls gesetzt, lässt dies Debconf Warnungen über verschiedene Dinge nicht " "anzeigen. Dies kann im Vorbeigehen durch die Umgebungsvariable " "DEBCONF_NOWARNINGS überstimmt werden." #. type: TP #: debconf.conf.5:72 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:77 msgid "" "Makes debconf log debugging information as it runs, to the syslog. The value " "it is set to controls that is logged. See Debug, above for an explanation of " "the values that can be set to control what is logged." msgstr "" "Lässt Debconf, während es läuft, Informationen zur Fehlersuche in das Syslog " "schreiben. Der Wert, auf den dies gesetzt wird, kontrolliert, was " "protokolliert wird. Siehe oben »Debug« für eine Erklärung der Werte, die " "gesetzt werden können, um zu kontrollieren, was protokolliert wird." #. type: TP #: debconf.conf.5:77 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:82 msgid "" "If set to \"true\", makes some debconf frontends use a special terse display " "mode that outputs as little as possible. Defaults to false. Terse mode may " "be temporarily set via the DEBCONF_TERSE environment variable." msgstr "" "Falls auf »true« gesetzt, lässt dies einige Debconf-Benutzerschnittstellen " "einen besonders knappen Anzeigemodus benutzen, der so wenig wie möglich " "ausgibt. Der knappe Modus kann temporär über die Umgebungsvariable " "DEBCONF_TERSE gesetzt werden." #. type: Plain text #: debconf.conf.5:87 #, no-wrap msgid "" "For example, the first stanza of a file might look like this:\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" "Der erste Abschnitt der Datei kann wie folgt aussehen:\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:91 #, no-wrap msgid "" "Each remaining stanza in the file sets up a database. A database stanza\n" "begins by naming the database:\n" " Name: configdb\n" msgstr "" "Jeder verbleibende Absatz in der Datei richtet eine Datenbank ein. Ein\n" "Datenbankenabschnitt beginnt mit der Benennung der Datenbank:\n" " Name: configdb\n" #. type: Plain text #: debconf.conf.5:95 #, no-wrap msgid "" "Then it indicates what database driver should be used for this database.\n" "See DRIVERS, below, for information about what drivers are available.\n" " Driver: File\n" msgstr "" "Dann wird angezeigt, welcher Datenbank-Treiber für diese Datenbank benutzt\n" "werden soll. Siehe unten TREIBER für Informationen, welche Treiber verfügbar\n" "sind.\n" " Driver: File\n" #. type: Plain text #: debconf.conf.5:100 #, no-wrap msgid "" "You can indicate that the database is not essential to the proper\n" "functioning of debconf by saying it is not required. This will make debconf\n" "muddle on if the database fails for some reason.\n" " Required: false\n" msgstr "" "Sie können angeben, dass die Datenbank nicht essenziell für die ordnungsgemäße\n" "Funktionsweise von Debconf ist, indem Sie sagen, dass sie nicht erforderlich\n" "ist. Dies lässt Debconf fortfahren, falls die Datenbank aus irgendeinem\n" "Grund scheitert.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:104 #, no-wrap msgid "" "You can mark any database as readonly and debconf will not write anything\n" "to it.\n" " Readonly: true\n" msgstr "" "Sie können jede Datenbank als nur-lesend markieren, und Debconf schreibt\n" "nichts hinein.\n" " Readonly: true\n" #. type: Plain text #: debconf.conf.5:107 msgid "" "You can also limit what types of data can go into the database with Accept- " "and Reject- lines; see ACCESS CONTROLS, below." msgstr "" "Sie können mit Accept- und Reject-Zeilen auch begrenzen, welche Arten von " "Daten in die Datenbank gelangen können; siehe unten ZUGRIFFSKONTROLLE." #. type: Plain text #: debconf.conf.5:112 #, no-wrap msgid "" "The remainder of each database stanza is used to provide configuration\n" "specific to that driver. For example, the Text driver needs to know\n" "a directory to put the database in, so you might say:\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" "Der Rest jedes Datenbanken-Absatz wird benutzt, um Konfiguration speziell zu\n" "diesem Treiber bereitzustellen. Zum Beispiel muss der Treiber Text ein\n" "Verzeichnis wissen, in das er die Datenbank packt, so dass Sie sagen könnten:\n" " Filename: /var/cache/debconf/config.dat\n" #. type: SH #: debconf.conf.5:112 #, no-wrap msgid "DRIVERS" msgstr "TREIBER" #. type: Plain text #: debconf.conf.5:119 msgid "" "A number of drivers are available, and more can be written with little " "difficulty. Drivers come in two general types. First there are real drivers " "-- drivers that actually access and store data in some kind of database, " "which might be on the local filesystem, or on a remote system. Then there " "are meta-drivers that combine other drivers together to form more " "interesting systems. Let's start with the former." msgstr "" "Eine Reihe von Treibern sind verfügbar, und mehr noch können mit wenig " "Schwierigkeit geschrieben werden. Treiber gibt es in zwei generellen Typen. " "Zuerst gibt es echte Treiber -- Treiber die tatsächlich auf Daten in " "irgendeiner Form von Datenbank zugreifen und speichern, welche im lokalen " "Dateisystem oder auf einem entfernten System sein können. Dann gibt es Meta-" "Treiber, die andere Treiber kombinieren, um interessantere Systeme zu " "formen. Lassen Sie uns mit ersteren beginnen." #. type: TP #: debconf.conf.5:120 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:127 msgid "" "This database driver allows debconf to store a whole database in a single " "flat text file. This makes it easy to archive, transfer between machines, " "and edit. It is one of the more compact database formats in terms of disk " "space used. It is also one of the slowest." msgstr "" "Dieser Datenbank-Treiber erlaubt Debconf, eine vollständige Datenbank in " "einer einzelnen flachen Textdatei zu speichern. Dies erlaubt einfaches " "Archivieren, Transferieren zwischen Maschinen und Editieren. Es ist eines " "der kompakteren Datenbank-Formate hinsichtlich des benutzten Plattenplatz. " "Es ist auch eins der langsamsten." #. type: Plain text #: debconf.conf.5:130 msgid "" "On the downside, the entire file has to be read in each time debconf starts " "up, and saving it is also slow." msgstr "" "Als Nachteil muss die gesamte Datei eingelesen werden, jedes Mal, wenn " "Debconf startet, und Speichern ist ebenfalls langsam." #. type: Plain text #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309 msgid "The following things are configurable for this driver." msgstr "Die folgenden Dinge sind für diesen Treiber konfigurierbar:" #. type: TP #: debconf.conf.5:133 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:136 msgid "The file to use as the database. This is a required field." msgstr "" "Die Datei, die als Datenbank benutzt werden soll. Dies ist ein " "erforderliches Feld." #. type: TP #: debconf.conf.5:136 debconf.conf.5:203 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:140 msgid "" "The permissions to create the file with if it does not exist. Defaults to " "600, since the file could contain passwords in some circumstances." msgstr "" "Die Berechtigungen, mit denen die Datei erzeugt wird, falls sie nicht " "existiert. Standardmäßig 600, weil die Datei unter Umständen Passwörter " "enthalten könnte." #. type: TP #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 msgid "" "The format of the file. See FORMATS below. Defaults to using a rfc-822 like " "format." msgstr "" "Das Format der Datei. Siehe unten FORMATE. Standardmäßig wird ein RFC-822-" "ähnliches Format benutzt." #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:148 debconf.conf.5:184 msgid "" "Whether a backup should be made of the old file before changing it. " "Defaults to true." msgstr "" "Ob von der alten Datei eine Sicherheitskopie gemacht werden soll, bevor sie " "verändert wird. Standardmäßig »true«." #. type: Plain text #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209 msgid "As example stanza setting up a database using this driver:" msgstr "" "Ein Beispiel-Absatz, der eine Datenbank unter Benutzung dieses Treiber " "einrichtet:" #. type: Plain text #: debconf.conf.5:155 #, no-wrap msgid "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" msgstr "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" #. type: TP #: debconf.conf.5:156 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:166 msgid "" "This database driver allows debconf to store data in a hierarchical " "directory structure. The names of the various debconf templates and " "questions are used as-is to form directories with files in them. This format " "for the database is the easiest to browse and fiddle with by hand. It has " "very good load and save speeds. It also typically occupies the most space, " "since a lot of small files and subdirectories do take up some additional " "room." msgstr "" "Dieser Datenbank-Treiber erlaubt Debconf, Daten in einer hierarchischen " "Verzeichnisstruktur zu speichern. Die Namen der verschiedenen Debconf-" "Vorlagen und -Fragen werden benutzt, wie sie sind, um Verzeichnisse mit " "Dateien darin zu formen. Dieses Datenbanken-Format ist das einfachste, wenn " "es darum geht, von Hand zu stöbern und zu tricksen. Es hat sehr gute Lade- " "und Speicher-Geschwindigkeiten. Es beansprucht typischerweise auch den " "meisten Platz, weil viele kleine Dateien und Unterverzeichnis zusätzlichen " "Raum nehmen." #. type: TP #: debconf.conf.5:169 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:172 msgid "The directory to put the files in. Required." msgstr "Das Verzeichnis, in das die Dateien gelegt werden. Erforderlich." #. type: TP #: debconf.conf.5:172 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:176 msgid "" "An extension to add to the names of files. Must be set to a non-empty " "string; defaults to \".dat\"" msgstr "" "Eine Erweiterung, die den Namen von Dateien hinzugefügt werden. Muss auf " "eine nicht-leere Zeichenkette gesetzt werden; standardmäßig ».dat«" #. type: Plain text #: debconf.conf.5:192 #, no-wrap msgid "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" msgstr "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" #. type: TP #: debconf.conf.5:193 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:200 msgid "" "This database driver is a compromise between the File and DirTree databases. " "It uses a directory, in which there is (approximately) one file per package " "that uses debconf. This is fairly fast, while using little more room than " "the File database driver." msgstr "" "Dieser Datenbank-Treiber ist ein Kompromiss zwischen den Datenbanken »File« " "und »DirTree«. Er benutzt ein Verzeichnis, in dem es (ungefähr) eine Datei " "pro Paket, das Debconf benutzt, gibt. Dies ist ziemlich schnell, während es " "wenig mehr Platz als der Datenbank-Treiber »File« benutzt." #. type: Plain text #: debconf.conf.5:203 msgid "" "This driver is configurable in the same ways as is the DirTree driver, plus:" msgstr "" "Dieser Treiber ist auf dieselbe Weise wie der Treiber DirTree " "konfigurierbar, und zusätzlich:" #. type: Plain text #: debconf.conf.5:207 msgid "" "The permissions to create files with. Defaults to 600, since the files could " "contain passwords in some circumstances." msgstr "" "Die Berechtigungen, mit denen Dateien erzeugt werden. Standardmäßig 600, da " "die Dateien unter Umständen Passwörter enthalten könnten." #. type: Plain text #: debconf.conf.5:213 #, no-wrap msgid "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" msgstr "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" #. type: TP #: debconf.conf.5:214 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:218 msgid "" "WARNING: This database driver is currently experimental. Use with caution." msgstr "" "WARNUNG: Dieser Datenbank-Treiber ist gegenwärtig experimentell. Mit " "Vorsicht zu benutzen." #. type: Plain text #: debconf.conf.5:226 msgid "" "This database driver accesses a LDAP directory for debconf configuration " "data. Due to the nature of the beast, LDAP directories should typically be " "accessed in read-only mode. This is because multiple accesses can take " "place, and it's generally better for data consistency if nobody tries to " "modify the data while this is happening. Of course, write access is " "supported for those cases where you do want to update the config data in the " "directory." msgstr "" "Dieser Datenbank-Treiber greift für Debconf-Konfigurationsdaten auf ein LDAP-" "Verzeichnis zu. Wegen ihrer vertrackten Natur sollte auf LDAP-Verzeichnisse " "typischerweise im Nur-Lese-Modus zugegriffen werden. Dies ist notwendig, " "weil mehrere gleichzeitige Zugriffe stattfinden können, und es ist generell " "besser für die Daten-Konsistenz, dass niemand versucht, die Daten zu " "verändern, während der Zugriff erfolgt. Selbstverständlich wird " "Schreibzugriff unterstützt, in den Fällen, in denen Sie die " "Konfigurationsdaten in dem Verzeichnis aktualisieren wollen." #. type: Plain text #: debconf.conf.5:229 msgid "" "For information about setting up a LDAP server for debconf, read /usr/share/" "doc/debconf-doc/README.LDAP (from the debconf-doc package)." msgstr "" "Für Informationen über das Einrichten eines LDAP-Server für Debconf lesen " "Sie /usr/share/doc/debconf-doc/README.LDAP (im Paket debconf-doc)" #. type: Plain text #: debconf.conf.5:232 msgid "" "To use this database driver, you must have the libnet-ldap-perl package " "installed. Debconf suggests that package, but does not depend on it." msgstr "" "Um diesen Datenbank-Treiber zu benutzen, müssen Sie das Paket libnet-ldap-" "perl installieren. Debconf schlägt dieses Paket vor, hängt aber nicht von " "ihm ab." #. type: Plain text #: debconf.conf.5:236 msgid "" "Please carefully consider the security implications of using a remote " "debconf database. Unless you trust the source, and you trust the intervening " "network, it is not a very safe thing to do." msgstr "" "Bitte erwägen Sie sorgfältig die Sicherheits-Auswirkungen, die die " "Verwendung einer entfernten Debconf-Datenbank mit sich bringt. Solange Sie " "nicht der Quelle und dem zwischengelegenen Netzwerk vertrauen, ist dies " "keine sichere Sache." #. type: TP #: debconf.conf.5:239 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:242 msgid "The host name or IP address of an LDAP server to connect to." msgstr "" "Hostname oder IP-Adresse des LDAP-Servers, mit dem verbunden werden soll." #. type: TP #: debconf.conf.5:242 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:246 msgid "" "The port on which to connect to the LDAP server. If none is given, the " "default port is used." msgstr "" "Der Port, auf dem mit dem LDAP-Server verbunden werden soll. Falls nicht " "angegeben, wird der standardmäßige Port benutzt." #. type: TP #: debconf.conf.5:246 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:251 msgid "" "The DN under which all config items will be stored. Each config item will be " "assumed to live in a DN of cn=Eitem nameE,EBase DNE. If this " "structure is not followed, all bets are off." msgstr "" "Die DN, unter der alle Konfigurationselemente gespeichert werden. Von jedem " "Konfigurationselement wird angenommen, dass es in einer DN cn=Eitem " "nameE,EBase DNE existiert. Falls dieser Struktur nicht gefolgt " "wird, wird für nichts garantiert." #. type: TP #: debconf.conf.5:251 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:255 msgid "" "The DN to bind to the directory as. Anonymous bind will be used if none is " "specified." msgstr "" "Die DN, als die das Verzeichnis zu binden ist. Anonyme Bindung wird benutzt, " "falls keine angegeben wird." #. type: TP #: debconf.conf.5:255 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:259 msgid "" "The password to use in an authenticated bind (used with binddn, above). If " "not specified, anonymous bind will be used." msgstr "" "Das bei einer authentifizierten Bindung zu benutzende Passwort (benutzt mit " "binddn oben). Falls nicht angegeben, wird anonyme Bindung benutzt." #. type: Plain text #: debconf.conf.5:265 msgid "" "This option should not be used in the general case. Anonymous binding should " "be sufficient most of the time for read-only access. Specifying a bind DN " "and password should be reserved for the occasional case where you wish to " "update the debconf configuration data." msgstr "" "Diese Option sollte nicht im generellen Falle benutzt werden. Anonyme " "Bindung sollte die meiste Zeit für Nur-Lese-Zugriff ausreichend sein. " "Bindungs-DN und -Password sollte für den gelegentlichen Fall reserviert " "werden, in dem Sie die Debconf-Konfigurationsdaten aktualisieren wollen." #. type: TP #: debconf.conf.5:266 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:272 msgid "" "Enable access to individual LDAP entries, instead of fetching them all at " "once in the beginning. This is very useful if you want to monitor your LDAP " "logs for specific debconf keys requested. In this way, you could also write " "custom handling code on the LDAP server part." msgstr "" "Aktiviere Zugriff auf individuelle LDAP-Einträge, anstatt sie am Anfang alle " "auf einmal zu holen. Dies ist sehr nützlich, falls Sie die Abfrage " "bestimmter Debconf-Schlüssel in Ihren LDAP-Protokollen überwachen wollen. " "Auf diese Weise könnten Sie auch eigenen Behandlungscode auf der Seite des " "LDAP-Servers schreiben." #. type: Plain text #: debconf.conf.5:279 msgid "" "Note that when this option is enabled, the connection to the LDAP server is " "kept active during the whole Debconf run. This is a little different from " "the all-in-one behavior where two brief connections are made to LDAP; in the " "beginning to retrieve all the entries, and in the end to save eventual " "changes." msgstr "" "Beachten Sie, dass, wenn diese Option gesetzt ist, die Verbindung zum LDAP-" "Server während des gesamten Debconf-Laufs aktiv gehalten wird. Dies ist ein " "wenig verschieden zu dem Alles-in-Einem-Verhalten, wo zwei kurze LDAP-" "Verbindungen erfolgen; am Anfang, um alle Einträge zu holen, und am Ende, um " "mögliche Änderungen zu speichern." #. type: Plain text #: debconf.conf.5:284 msgid "" "An example stanza setting up a database using this driver, assuming the " "remote database is on example.com and can be accessed anonymously:" msgstr "" "Ein Beispiel-Absatz, der eine Datenbank einrichtet, die diesen Treiber " "benutzt, unter Annahme, dass die entfernte Datenbank auf example.com ist und " "anonym zugegriffen werden kann:" #. type: Plain text #: debconf.conf.5:291 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" msgstr "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" #. type: Plain text #: debconf.conf.5:294 msgid "" "Another example, this time the LDAP database is on localhost, and can be " "written to:" msgstr "" "Noch ein Beispiel, diesmal ist die LDAP-Datenbank auf localhost, und kann " "beschrieben werden:" #. type: Plain text #: debconf.conf.5:301 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" msgstr "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" #. type: TP #: debconf.conf.5:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:307 msgid "" "This special-purpose database driver reads and writes the database from " "standard input/output. It may be useful for people with special needs." msgstr "" "Dieser Datenbankentreiber für besondere Anlässe liest und schreibt die " "Datenbank von der Standardein/-ausgabe. Er mag für Leute mit besonderen " "Bedürfnissen nützlich sein." #. type: Plain text #: debconf.conf.5:314 msgid "" "The format to read and write. See FORMATS below. Defaults to using a rfc-822 " "like format." msgstr "" "Das zu lesende und zu schreibende Format. Siehe unten FORMATE. Standardmäßig " "ein RFC-822-ähnliches Format." #. type: TP #: debconf.conf.5:314 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:318 msgid "" "File descriptor number to read from. Defaults to reading from stdin. If set " "to \"none\", the database will not read any data on startup." msgstr "" "Nummer des Dateideskriptors von dem gelesen werden soll. Liest standardmäßig " "von Stdin. Falls auf »none« gesetzt, liest die Datenbank beim Starten keine " "Daten." #. type: TP #: debconf.conf.5:318 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:322 msgid "" "File descriptor number to write to. Defaults to writing to stdout. If set to " "\"none\", the database will be thrown away on shutdown." msgstr "" "Nummer des Dateideskriptors auf den geschrieben werden soll. Schreibt " "standardmäßig auf Stdout. Falls auf »none« gesetzt, wird die Datenbank beim " "Schließen verworfen." #. type: Plain text #: debconf.conf.5:326 msgid "That's all of the real drivers, now moving on to meta-drivers.." msgstr "" "Das sind alle echten Treiber, lassen Sie uns nun zu den Meta-Treibern gehen." #. type: TP #: debconf.conf.5:326 debconf.conf.5:354 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:335 msgid "" "This driver stacks up a number of other databases (of any type), and allows " "them to be accessed as one. When debconf asks for a value, the first " "database on the stack that contains the value returns it. If debconf writes " "something to the database, the write normally goes to the first driver on " "the stack that has the item debconf is modifying, and if none do, the new " "item is added to the first writable database on the stack." msgstr "" "Dieser Treiber stapelt eine Anzahl anderer Datenbanken (jeglichen Typs), und " "erlaubt, auf sie zuzugreifen, als ob sie eine einzige wären. Wenn Debconf " "einen Wert anfragt, gibt die erste Datenbank in dem Stapel, die den Wert " "enthält, ihn zurück. Falls Debconf etwas in die Datenbank schreibt, wird " "normalerweise auf den ersten Treiber in dem Stapel, der das modifizierte " "Element enthält, geschrieben, und falls es keiner hat, wird das neue Element " "der ersten schreibbaren Datenbank auf dem Stapel hinzugefügt." #. type: Plain text #: debconf.conf.5:343 msgid "" "Things become more interesting if one of the databases on the stack is " "readonly. Consider a stack of the databases foo, bar, and baz, where foo and " "baz are both readonly. Debconf wants to change an item, and this item is " "only present in baz, which is readonly. The stack driver is smart enough to " "realize that won't work, and it will copy the item from baz to bar, and the " "write will take place in bar. Now the item in baz is shadowed by the item in " "bar, and it will not longer be visible to debconf." msgstr "" "Die Dinge werden interessanter, falls eine der Datenbanken auf dem Stapel " "nur-lesend ist. Betrachten wir einen Stapel der Datenbanken Foo, Bar und " "Baz, wo Foo und Baz beide nur-lesend sind. Debconf will ein Element ändern, " "und dieses Element ist nur in Baz präsent, die nur-lesend ist. Der Stapel-" "Treiber ist klever genug, zu erkennen, dass das nicht funktioniert, und " "kopiert das Element von Baz nach Bar, und das Schreiben findet in Bar statt. " "Nun wird das Element in Baz von dem in Bar verdeckt, und ist für Debconf " "nicht mehr sichtbar." #. type: Plain text #: debconf.conf.5:350 msgid "" "This kind of thing is particularly useful if you want to point many systems " "at a central, readonly database, while still allowing things to be " "overridden on each system. When access controls are added to the picture, " "stacks allow you to do many other interesting things, like redirect all " "passwords to one database while a database underneath it handles everything " "else." msgstr "" "Dieses ist vor allem nützlich, falls Sie viele Systeme auf eine zentrale, " "nur-lesende Datenbank verweisen wollen, wobei immer noch auf jedem System " "erlaubt ist, Dinge zu überstimmen. Wenn dem Bild Zugriffskontrollen " "hinzugefügt werden, erlauben Ihnen Stapel viele andere interessante Dinge zu " "tun, wie alle Passwörter in eine Datenbank umzuleiten, während eine " "Datenbank darunter alles andere behandelt." #. type: Plain text #: debconf.conf.5:352 msgid "Only one piece of configuration is needed to set up a stack:" msgstr "" "Nur ein Konfigurationselement wird zum Einrichten eines Stapels benötigt:" #. type: Plain text #: debconf.conf.5:358 msgid "" "This is where you specify a list of other databases, by name, to tell it " "what makes up the stack." msgstr "" "Hier geben Sie eine Liste anderer Datenbanken namentlich an, um dem Treiber " "zu sagen, was den Stapel bildet." #. type: Plain text #: debconf.conf.5:361 debconf.conf.5:387 msgid "For example:" msgstr "Zum Beispiel:" #. type: Plain text #: debconf.conf.5:365 #, no-wrap msgid "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" msgstr "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" #. type: Plain text #: debconf.conf.5:368 msgid "" "WARNING: The stack driver is not very well tested yet. Use at your own risk." msgstr "" "WARNUNG: Der Stapel-Treiber ist noch nicht sehr gut getestet. Auf eigenes " "Risiko zu verwenden." #. type: Plain text #: debconf.conf.5:374 msgid "" "This driver passes all requests on to another database driver. But it also " "copies all write requests to a backup database driver." msgstr "" "Dieser Treiber leitet alle Anfragen an einen anderen Datenbankentreiber " "weiter. Aber er kopiert auch alle Schreibe-Anfragen als Sicherheitskopie an " "einen zweiten Datenbankentreiber." #. type: Plain text #: debconf.conf.5:376 debconf.conf.5:400 msgid "You must specify the following fields to set up this driver:" msgstr "" "Sie müssen für die Einrichtung dieses Treibers die folgenden Felder angeben." #. type: TP #: debconf.conf.5:378 debconf.conf.5:402 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:381 debconf.conf.5:405 msgid "The database to read from and write to." msgstr "Die Datenbank, von der gelesen und auf die geschrieben werden soll." #. type: TP #: debconf.conf.5:381 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:384 msgid "The name of the database to send copies of writes to." msgstr "" "Der Name der Datenbank, an die Kopien von Schreibzugriffen gesendet werden " "sollen." #. type: Plain text #: debconf.conf.5:392 #, no-wrap msgid "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" msgstr "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" #. type: Plain text #: debconf.conf.5:398 msgid "" "This driver passes all requests on to another database driver, outputting " "verbose debugging output about the request and the result." msgstr "" "Dieser Treiber leitet alle Anfragen an einen anderen Datenbankentreiber " "weiter, und gibt eine wortreiche Ausgabe zur Fehlersuche über Anfrage und " "Ergebnis aus." #. type: SH #: debconf.conf.5:407 #, no-wrap msgid "ACCESS CONTROLS" msgstr "ZUGRIFFSKONTROLLEN" #. type: Plain text #: debconf.conf.5:411 msgid "" "When you set up a database, you can also use some fields to specify access " "controls. You can specify that a database only accepts passwords, for " "example, or make a database only accept things with \"foo\" in their name." msgstr "" "Wenn Sie eine Datenbank einrichten, können Sie auch einige Felder benutzen, " "um Zugriffskontrollen anzugeben. Sie können zum Beispiel angeben, dass eine " "Datenbank nur Passwörter akzeptiert, oder eine Datenbank nur Dinge mit »foo« " "in ihrem Namen annehmen lassen." #. type: TP #: debconf.conf.5:411 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:416 msgid "" "As was mentioned earlier, this access control, if set to \"true\", makes a " "database readonly. Debconf will read values from it, but will never write " "anything to it." msgstr "" "Wie vorher erwähnt, macht diese Zugriffskontrolle, falls auf »true« gesetzt, " "eine Datenbank nur-lesend. Debconf liest aus ihr Werte, aber schreibt " "niemals etwas in sie hinein." #. type: TP #: debconf.conf.5:416 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:422 msgid "" "The text in this field is a perl-compatible regular expression that is " "matched against the names of items as they are requested from the database. " "Only if an items name matches the regular expression, will the database " "allow debconf to access or modify it." msgstr "" "Der Text in diesem Feld ist ein Perl-kompatibler regulärer Ausdruck, der auf " "die Namen der Elemente, wie sie von der Datenbank angefragt werden, " "angewendet wird. Nur wenn der Name eines Elements mit dem regulären Ausdruck " "übereinstimmt, erlaubt die Datenbank Debconf auf es zuzugreifen oder es zu " "modifizieren." #. type: TP #: debconf.conf.5:422 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:426 msgid "" "Like Accept-Name, except any item name matching this regular expression will " "be rejected." msgstr "" "Wie Accept-Name, außer dass jedes Element, dessen Namen mit diesem regulären " "Ausdruck übereinstimmt, zurückgewiesen wird." #. type: TP #: debconf.conf.5:426 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:431 msgid "" "Another regular expression, this matches against the type of the item that " "is being accessed. Only if the type matches the regex will access be granted." msgstr "" "Noch ein regulärer Ausdruck, dieser wird auf den Typ des zugegriffenen " "Elementes angewendet. Nur falls der Typ auf den Ausdruck passt, wird der " "Zugriff gestattet." #. type: TP #: debconf.conf.5:431 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:435 msgid "" "Like Accept-Type, except any type matching this regular expression will be " "rejected." msgstr "" "Wie Accept-Type, außer dass jeder Typ, der auf diesen regulären Ausdruck " "passt, zurückgewiesen wird." #. type: SH #: debconf.conf.5:435 #, no-wrap msgid "FORMATS" msgstr "FORMATE" #. type: Plain text #: debconf.conf.5:439 msgid "" "Some of the database drivers use format modules to control the actual format " "in which the database is stored on disk. These formats are currently " "supported:" msgstr "" "Einige der Datenbankentreiber benutzen Format-Module, um das eigentliche " "Format zu kontrollieren, in welchem die Datenbank auf Platte gespeichert " "wird. Diese Formate werden gegenwärtig unterstützt:" #. type: TP #: debconf.conf.5:439 #, no-wrap msgid "B<822>" msgstr "B<822>" #. type: Plain text #: debconf.conf.5:444 msgid "" "This is a file format loosely based upon the rfc-822 format for email " "message headers. Similar formats are used throughout Debian; in the dpkg " "status file, and so on." msgstr "" "Dies ist ein Dateiformat, das ungefähr auf dem RFC-822-Format für Kopfzeilen " "von E-Mails basiert. Ähnliche Formate werden überall in Debian benutzt; bei " "der dpkg-Status-Datei und so weiter." #. type: Plain text #: debconf.conf.5:446 msgid "Here is a more complicated example of a debconf.conf file." msgstr "Hier ist ein komplizierteres Beispiel einer Datei debconf.conf." #. type: Plain text #: debconf.conf.5:452 #, no-wrap msgid "" " # This stanza is used for general debconf setup.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" msgstr "" " # Dieser Absatz richtet Debconf generell ein.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" #. type: Plain text #: debconf.conf.5:457 #, no-wrap msgid "" " # This is my own local database.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" msgstr "" " # Dies ist meine eigene lokale Datenbank.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" #. type: Plain text #: debconf.conf.5:469 #, no-wrap msgid "" " # This is another database that I use to hold\n" " # only X server configuration.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # It's sorta hard to work out what questions\n" " # belong to X; it should be using a deeper\n" " # tree structure so I could just match on ^X/\n" " # Oh well.\n" " Accept-Name: xserver|xfree86|xbase\n" msgstr "" " # Dies ist eine weitere Datenbank, in der ich\n" " # nur Konfiguration für den X-Server habe.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # Es ist ein wenig schwer, zu bestimmen,\n" " # welche Fragen zu X11 gehören; man sollte\n" " # eine tiefere Baumstruktur verwenden, so\n" " # dass ich nur auf ^X/ zu schauen bräuchte\n" " # Ach ja.\n" " Accept-Name: xserver|xfree86|xbase\n" #. type: Plain text #: debconf.conf.5:485 #, no-wrap msgid "" " # This is our company's global, read-only\n" " # (for me!) debconf database.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # I don't want any passwords that might be\n" " # floating around in there.\n" " Reject-Type: password\n" " # If this db is not accessible for whatever\n" " # reason, carry on anyway.\n" " Required: false\n" msgstr "" " # Die ist die globale Debconf-Datenbank\n" " # unserer Firma, (für mich) nur lesbar.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # Ich möchte keine Passwörter, die in\n" " # ihr enthalten sein könnten.\n" " Reject-Type: password\n" " # Falls diese DB aus welchem Grund auch nicht\n" " # zugreifbar ist, mache einfach weiter.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:493 #, no-wrap msgid "" " # I use this database to hold\n" " # passwords safe and secure.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" msgstr "" " # In dieser Datenbank halte ich\n" " # sicher Passwörter\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" #. type: Plain text #: debconf.conf.5:506 #, no-wrap msgid "" " # Let's put them all together\n" " # in a database stack.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # So, all passwords go to the password database.\n" " # Most X configuration stuff goes to the X\n" " # database, and anything else goes to my main\n" " # database. Values are looked up in each of those\n" " # in turn, and if none has a particular value, it\n" " # is looked up in the company-wide LDAP database\n" " # (unless it's a password).\n" msgstr "" " # Lassen Sie uns sie alle in\n" " # einem Datenbankenstapel\n" " # zusammenpacken\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # Also kommen alle Passwörter in die\n" " # Passwortdatenbank. Die meiste\n" " # Konfiguration für X11 kommt in die\n" " # Datenbank X, und alles andere kommt\n" " # in meine Datenbank. Werte werden der\n" " # Reihe nach in diesen nachgeschlagen,\n" " # und wenn keine einen bestimmten Wert\n" " # hat, wird in der Firmen-weiten LDAP-\n" " # Datenbank nachgeschlagen (außer es\n" " # ist ein Passwort).\n" #. type: Plain text #: debconf.conf.5:514 #, no-wrap msgid "" " # A database is also used to hold templates. We\n" " # don't need to make this as fancy.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" msgstr "" " # Auch für das Halten von Vorlagen wird eine\n" " # Datenbank benutzt. Wir brauchen diese\n" " # nicht so hübsch zu machen.\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" #. type: SH #: debconf.conf.5:514 confmodule.3:22 #, no-wrap msgid "NOTES" msgstr "ANMERKUNGEN" #. type: Plain text #: debconf.conf.5:517 msgid "" "If you use something like ${HOME} in this file, it will be replaced with the " "value of the named environment variable." msgstr "" "Falls Sie in dieser Datei etwas wie ${HOME} benutzen, wird es durch den Wert " "der benannten Umgebungsvariablen ersetzt." #. type: Plain text #: debconf.conf.5:521 msgid "" "Environment variables can also be used to override the databases on the fly, " "see B(7)" msgstr "" "Umgebungsvariablen können auch benutzt werden, um die Datenbanken im " "Vorbeigehen zu überstimmen, siehe B(7)." #. type: Plain text #: debconf.conf.5:524 msgid "" "The field names (the part of the line before the colon) is case-insensitive. " "The values, though, are case sensitive." msgstr "" "Bei den Feldnamen (der Teil der Zeile vor dem Doppelpunkt) wird nicht auf " "Groß-/Kleinschreibung geachtet. Aber bei den Werten." #. type: SH #: debconf.conf.5:524 #, no-wrap msgid "PLANNED ENHANCEMENTS" msgstr "GEPLANTE ERWEITERUNGEN" #. type: Plain text #: debconf.conf.5:533 msgid "" "More drivers and formats. Some ideas include: A SQL driver, with the " "capability to access a remote database. A DHCP driver, that makes available " "some special things like hostname, IP address, and DNS servers. A driver " "that pulls values out of public DNS records TXT fields. A format that is " "compatible with the output of cdebconf. An override driver, which can " "override the value field or flags of all requests that pass through it." msgstr "" "Mehr Treiber und Formate. Einige Ideen beinhalten: Ein SQL-Treiber, mit der " "Fähigkeit, auf eine entfernte Datenbank zuzugreifen. Ein DHCP-Treiber, der " "einige besondere Dinge wie Hostname, IP-Adresse und DNS-Server verfügbar " "macht. Ein Treiber, der Werte aus TXT-Feldern in öffentlichen DNS-Einträgen " "zieht. Ein Format, das kompatibel mit der Ausgabe von cdebconf ist. Ein " "Überstimmungstreiber, der die Wert-Felder oder Flags von allen Anfragen, die " "durch ihn hindurchgeleitet werden, überstimmen kann." #. type: SH #: debconf.conf.5:533 #, no-wrap msgid "FILES" msgstr "DATEIEN" #. type: Plain text #: debconf.conf.5:535 msgid "/etc/debconf.conf" msgstr "/etc/debconf.conf" #. type: Plain text #: debconf.conf.5:537 msgid "~/.debconfrc" msgstr "~/.debconfrc" #. type: Plain text #: debconf.conf.5:539 msgid "B(7)" msgstr "B(7)" #. type: Plain text #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969 msgid "Joey Hess Ejoeyh@debian.orgE" msgstr "Joey Hess Ejoeyh@debian.orgE" #. type: TH #: confmodule.3:1 #, no-wrap msgid "CONFMODULE" msgstr "CONFMODULE" #. type: Plain text #: confmodule.3:4 msgid "confmodule - communicate with Debian configuration system FrontEnd." msgstr "" "confmodule - mit Debians Konfigurationssystemschnittstelle kommunizieren." #. type: Plain text #: confmodule.3:12 #, no-wrap msgid "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" msgstr "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" #. type: Plain text #: confmodule.3:22 msgid "" "This is a library of shell functions that eases communication with Debian's " "configuration management system. It can communicate with a FrontEnd via the " "debconf protocol. The design is that each command in the protocol is " "represented by one function in this module. The functionname is the same as " "the command, except it is prefixed with \"db_\" and is lower-case. Call the " "function and pass in any parameters you want to follow the command. Any " "textual return code from the FrontEnd will be returned to you in the $RET " "variable, while the numeric return code from the FrontEnd will be returned " "as a return code (and so those return codes must be captured or ignored)." msgstr "" "Dies ist eine Bibliothek von Shell-Funktionen, die die Kommunikation mit " "Debians Konfigurationsmanagementsystem erleichtert. Sie kann mit einer " "Benutzerschnittstelle über das Debconf-Protokoll kommunizieren. Nach dem " "Design wird jeder Befehl in dem Protokoll durch eine Funktion in diesem " "Modul repräsentiert. Der Funktionsname ist derselbe wie der Befehl, außer " "dass er das Präfix »db_« hat und kleingeschrieben wird. Rufen Sie die " "Funktion auf und übergeben Sie ihr jegliche Parameter, die Sie dem Befehl " "folgen lassen wollen. Jeglicher wörtliche Rückgabewert von der " "Benutzerschnittstelle wird Ihnen in der Variablen $RET zurückgegeben, " "während der nummerische Rückgabewert von der Benutzerschnittstelle als " "Rückgabewert $? zurückgegeben wird (und deshalb müssen diese Rückgabewerte " "aufgefangen oder ignoriert werden)." #. type: Plain text #: confmodule.3:29 #, no-wrap msgid "" "Once this library is loaded, any text you later output will go to standard\n" "error, rather than standard output. This is a good thing in general, because\n" "text sent to standard output is interpreted by the FrontEnd as commands. If\n" "you do want to send a command directly to the FrontEnd, you must output it\n" "to file descriptor 3, like this:\n" " echo GET foo/bar E&3\n" msgstr "" "Sobald diese Bibliothek geladen ist, kommt jeglicher Text, den Sie später\n" "ausgeben, auf die Standardfehlerausgabe, statt auf die Standardausgabe.\n" "Generell ist dies eine gute Sache, da Text, der auf die Standardausgabe\n" "geschickt wird, von der Schnittstelle als Befehle interpretiert wird. Falls Sie\n" "direkt einen Befehl an die Schnittstelle schicken wollen, müssen Sie ihn auf den\n" "Dateideskriptor 3 ausgeben, wie folgt:\n" " echo GET foo/bar E&3\n" #. type: Plain text #: confmodule.3:36 msgid "" "The library checks to make sure it is actually speaking to a FrontEnd by " "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is " "assumed to be running. If not, the library turns into one, and runs a copy " "of the script that loaded the library connected to it. This means that if " "you source this library, you should do so very near to the top of your " "script, because everything before the sourcing of the library may well be " "run again." msgstr "" "Die Bibliothek prüft die Variable DEBIAN_HAS_FRONTEND, um sicherzustellen, " "dass sie tatsächlich mit einer Benutzerschnittstelle spricht. Falls diese " "gesetzt ist, wird angenommen, dass eine Benutzerschnittstelle läuft. Falls " "nicht, verwandelt sich die Bibliothek in eine, und führt eine Kopie des " "Skripts aus, das die mit ihm verbundene Bibliothek geladen hat. Dies " "bedeutet, dass Sie dies ganz am Anfang Ihres Skriptes tun sollten, falls Sie " "diese Bibliothek sourcen, weil alles vor dem Sourcen der Bibliothek " "wahrscheinlich nochmals ausgeführt werden könnte." #. type: Plain text #: confmodule.3:42 msgid "" "B(7), B(8), B(8), " "debconf_specification in the debian-policy package" msgstr "" "B(7), B(8), B(8), " "debconf_specification im Paket debian-policy" #. type: TH #: debconf.7:1 #, no-wrap msgid "DEBCONF" msgstr "DEBCONF" #. type: Plain text #: debconf.7:4 msgid "debconf - Debian package configuration system" msgstr "debconf - Debian-Paket-Konfigurationssystem" #. type: Plain text #: debconf.7:8 msgid "" "Debconf is a configuration system for Debian packages. There is a rarely-" "used command named debconf, documented in B(1)" msgstr "" "Debconf ist ein Konfigurationssystem für Debian-Pakete. Es gibt auch einen " "selten verwandten Befehl namens debconf, der in B(1) dokumentiert " "ist." #. type: Plain text #: debconf.7:16 msgid "" "Debconf provides a consistent interface for configuring packages, allowing " "you to choose from several user interface frontends. It supports " "preconfiguring packages before they are installed, which allows large " "installs and upgrades to ask you for all the necessary information up front, " "and then go do the work while you do something else. It lets you, if you're " "in a hurry, skip over less important questions and information while " "installing a package (and revisit it later)." msgstr "" "Debconf stellt eine konsistente Schnittstelle zur Paketkonfiguration bereit " "und erlaubt es Ihnen, aus mehreren Benutzerschnittstellen auszuwählen. Es " "unterstützt die Vorkonfiguration von Paketen vor der Installation, womit bei " "großen Installationen und Upgrades alle notwendigen Informationen am Anfang " "abgefragt werden können und Sie dann während der Installation selbst sich " "anderen Dingen widmen können. Falls Sie in Eile sind, können Sie damit " "während der Paketinstallation weniger wichtige Fragen und Informationen " "überspringen (und diese dann später nochmal angehen)." #. type: SH #: debconf.7:16 #, no-wrap msgid "Preconfiguring packages" msgstr "Pakete vorkonfigurieren" #. type: Plain text #: debconf.7:22 msgid "" "Debconf can configure packages before they are even installed onto your " "system. This is useful because it lets all the questions the packages are " "going to ask be asked at the beginning of an install, so the rest of the " "install can proceed while you are away getting a cup of coffee." msgstr "" "Debconf kann sogar Pakete konfigurieren, bevor Sie auf Ihrem System " "installiert sind. Dies ist nützlich, weil damit alle Fragen, die die Pakete " "stellen werden, am Anfang der Installation gestellt werden können, so dass " "der Rest der Installation ablaufen kann, während Sie eine Tasse Kaffee holen." #. type: Plain text #: debconf.7:27 msgid "" "If you use apt (version 0.5 or above), and you have apt-utils installed, " "each package apt installs will be automatically preconfigured. This is " "controlled via I" msgstr "" "Falls Sie Apt (Version 0.6 oder neuer) verwenden und apt-utils ist " "installiert, wird jedes von Apt installierte Paket automatisch " "vorkonfiguriert. Dies wird über I gesteuert." # FIXME Double space #. type: Plain text #: debconf.7:33 msgid "" "Sometimes you might want to preconfigure a package by hand, when you're not " "installing it with apt. You can use B(8) to do that, " "just pass it the filenames of the packages you want to preconfigure. You " "will need apt-utils installed for that to work." msgstr "" "Manchmal möchten Sie vielleicht ein Paket von Hand vorkonfigurieren, wenn " "Sie es nicht mit APT installieren. Sie können B " "(8)benutzen, um das zu machen, übergeben Sie einfach die Dateinamen der " "Pakete, die Sie vorkonfigurieren wollen. Damit dies funktioniert, muss das " "Paket apt-utils installiert sein." #. type: SH #: debconf.7:33 #, no-wrap msgid "Reconfiguring packages" msgstr "Pakete erneut konfigurieren" #. type: Plain text #: debconf.7:40 msgid "" "Suppose you installed the package, and answered debconf's questions, but now " "that you've used it awhile, you realize you want to go back and change some " "of your answers. In the past, reinstalling a package was often the thing to " "do when you got in this situation, but when you reinstall the package, " "debconf seems to remember you have answered the questions, and doesn't ask " "them again (this is a feature)." msgstr "" "Angenommen Sie haben ein Paket installiert und Debconfs Fragen beantwortet, " "aber nun, da Sie es eine Weile benutzt haben, erkennen Sie, dass Sie " "zurückgehen und einige Ihrer Antworten ändern wollen. Früher mussten Sie das " "Paket erneut installieren, wenn Sie in diese Situation gerieten. Wenn Sie " "aber das Paket erneut installieren, scheint Debconf sich zu erinnern, dass " "Sie die Fragen beantwortet haben, und stellt sie nicht erneut (Dies ist eine " "Funktionalität)." #. type: Plain text #: debconf.7:44 #, no-wrap msgid "" "Luckily, debconf makes it easy to reconfigure any package that uses it.\n" "Suppose you want to reconfigure debconf itself. Just run, as root:\n" " dpkg-reconfigure debconf\n" msgstr "" "Glücklicherweise macht es Debconf einfach, jedes Paket, das es benutzt,\n" "erneut zu konfigurieren. Angenommen, Sie wollen Debconf selbst erneut\n" "konfigurieren. Führen Sie als root einfach das Folgende aus:\n" " dpkg-reconfigure debconf\n" #. type: Plain text #: debconf.7:49 msgid "" "This will ask all the questions you saw when debconf was first installed. " "It may ask you other questions as well, since it asks even low priority " "questions that may have been skipped when the package was installed. You " "can use it on any other package that uses debconf, as well." msgstr "" "Dies stellt alle Fragen, die Sie sahen, als Debconf das erste Mal " "installiert wurde. Es mag Ihnen auch andere Fragen stellen, weil es selbst " "Fragen mit niedriger Priorität stellt, die übersprungen wurden, als das " "Paket installiert wurde. Sie können diesen Befehl auch mit jedem anderen " "Paket verwenden, das Debconf benutzt." #. type: SH #: debconf.7:49 #, no-wrap msgid "Frontends" msgstr "Benutzerschnittstellen (Frontends)" #. type: Plain text #: debconf.7:53 msgid "" "One of debconf's unique features is that the interface it presents to you is " "only one of many, that can be swapped in at will. There are many debconf " "frontends available:" msgstr "" "Eines von Debconfs einzigartigen Funktionalitäten ist, dass die Ihnen " "präsentierte Schnittstelle nur eine von vielen ist, die nach Belieben " "ausgetauscht werden kann. Es gibt viele Debconf-Benutzerschnittstellen:" #. type: TP #: debconf.7:53 #, no-wrap msgid "B" msgstr "B" # FIXME Double spaces #. type: Plain text #: debconf.7:60 msgid "" "The default frontend, this uses the B(1) or B(1) " "programs to display questions to you. It works in text mode." msgstr "" "Die vorgegeben Benutzerschnittstelle, diese benutzt die Programme " "B(1) oder B(1), um die Fragen an Sie anzuzeigen. Sie " "arbeitet im Textmodus." #. type: TP #: debconf.7:60 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:72 msgid "" "The most traditional frontend, this looks quite similar to how Debian " "configuration always has been: a series of questions, printed out at the " "console using plain text, and prompts done using the readline library. It " "even supports tab completion. The libterm-readline-gnu-perl package is " "strongly recommended if you chose to use this frontend; the default readline " "module does not support prompting with default values. At the minimum, " "you'll need the perl-modules package installed to use this frontend." msgstr "" "Die traditionellste Benutzerschnittstelle, diese sieht ziemlich ähnlich aus, " "wie Debians Konfiguration immer war: eine Reihe von Fragen, ausgegeben auf " "die Konsole als reiner Texts, und Eingabeaufforderungen, die durch die " "Bibliothek readline erledigt werden. Es unterstützt sogar Vervollständigung " "durch die Tabulator-Taste. Das Paket libterm-readline-gnu-perl wird " "wärmstens empfohlen, wenn Sie die Benutzung dieser Benutzerschnittstelle " "wählen; das Standard-Module für readline ermöglicht keine Eingabeauforderung " "mit Vorgabewerten. Als Minimum muss das Paket perl-modules installiert sein, " "um diese Benutzerschnittstelle zu benutzen." # FIXME double spaces #. type: Plain text #: debconf.7:77 msgid "" "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to " "the previous question (if that is supported by the package that is using " "debconf), and pagedown (or ctrl-v) will skip forward to the next question." msgstr "" "Diese Benutzerschnittstelle hat einige Sondertasten. Bild-nach-oben (oder " "Ctrl-u) geht zur vorigen Frage zurück (falls dies von dem Debconf-" "benutzenden Paket unterstützt) und Bild-nach-unten (oder Ctrl-v) springt " "weiter zur nächsten Frage." #. type: Plain text #: debconf.7:80 msgid "" "This is the best frontend for remote admin work over a slow connection, or " "for those who are comfortable with unix." msgstr "" "Dies ist die beste Benutzerschnittstelle für Administrationsarbeit aus der " "Ferne über eine langsame Verbindung oder für alle, die mit Unix vertraut " "sind." #. type: TP #: debconf.7:81 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:90 msgid "" "This is the anti-frontend. It never interacts with you at all, and makes the " "default answers be used for all questions. It might mail error messages to " "root, but that's it; otherwise it is completely silent and unobtrusive, a " "perfect frontend for automatic installs. If you are using this front-end, " "and require non-default answers to questions, you will need to preseed the " "debconf database; see the section below on Unattended Package Installation " "for more details." msgstr "" "Dies ist die Anti-Benutzerschnittstelle. Sie tritt nie mit Ihnen in Kontakt, " "und lässt für alle Fragen die vorgegebenen Antworten benutzen. Sie mag " "Fehlermeldungen an root mailen, aber das war es; ansonsten ist sie komplett " "still und unaufdringlich, eine perfekte Schnittstelle für automatische " "Installationen. Falls Sie diese Benutzerschnittstelle benutzen und nicht-" "vorgegebene Antworten auf Fragen benötigen, müssen Sie die Debconf-Datenbank " "mit Voreinstellungen versehen; für weitere Details siehe unten den Abschnitt " "»Unbeaufsichtigte Paket-Installation«." #. type: TP #: debconf.7:90 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:96 msgid "" "This is a modern X GUI using the gtk and gnome libraries. Of course, it " "requires a valid DISPLAY to work; debconf will fall back to other frontends " "if it can't work. Note that this frontend requires you have the libgtk3-perl " "package installed." msgstr "" "Dies ist eine modern X-GUI, die die GTK und GNOME-Bibliotheken benutzt. " "Natürlich benötigtes es zum Funktionieren ein gültiges DISPLAY; Debconf " "greift auf andere Benutzerschnittstellen zurück, falls sie nicht " "funktionieren kann. Beachten Sie, dass diese Benutzerschnittstelle die " "Installation des Pakets libgtk3-perl erfordert." #. type: TP #: debconf.7:96 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:102 msgid "" "This frontend provides a modern X GUI based on the KDE Platform. You of " "course need a DISPLAY to use this frontend and you must install debconf-kde-" "helper package. The frontend will fall back to dialog if some of the " "prerequisites are not met." msgstr "" "Diese Benutzerschnittstelle stellt eine moderne X-Benutzerschnittstelle auf " "der KDE-Plattform bereit. Sie benötigen natürlich ein DISPLAY, um diese " "Oberfläche zu benutzen und müssen das Hilfspaket debconf-kde-helper " "installieren. Die Schnittstelle fällt auf Dialog zurück, falls einige der " "Voraussetzungen nicht zutreffen." #. type: TP #: debconf.7:102 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:110 msgid "" "This is for those fanatics who have to do everything in a text editor. It " "runs your editor on a file that looks something like a typical unix config " "file, and you edit the file to communicate with debconf. Debconf's author " "prefers to not comment regarding the circumstances that led to this frontend " "being written." msgstr "" "Dies ist für diese Fanatiker, die alles mit einem Texteditor erledigen " "müssen. Es ruft Ihren Editor mit einer Datei auf, die ein wenig wie eine " "typische Unix-Konfigurationsdatei aussieht, und Sie editieren die Datei, um " "mit Debconf zu kommunizieren. Der Autor von Debconf zieht es vor, nicht die " "Umstände zu kommentieren, die dazu geführt haben, dass diese " "Benutzerschnittstelle geschrieben wurde." #. type: TP #: debconf.7:110 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:120 msgid "" "This frontend acts as a web server, that you connect to with your web " "browser, to browse the questions and answer them. It has a lot of promise, " "but is a little rough so far. When this frontend starts up, it will print " "out the location you should point your web browser to. You have to run the " "web browser on the same machine you are configuring, for security reasons." msgstr "" "Diese Benutzerschnittstelle fungiert als Webserver, mit dem Sie sich mit " "Ihrem Web-Browser verbinden, um die Fragen zu sehen und sie zu beantworten. " "Sie ist vielversprechend, aber soweit ein wenig roh. Wenn diese " "Schnittstelle startet, gibt es die Adresse, die Sie mit Ihrem Web-Browser " "anzeigen sollten. Der Web-Browser muss aus Sicherheitsgründen auf der selben " "Maschine laufen, die Sie konfigurieren." #. type: Plain text #: debconf.7:126 msgid "" "Do keep in mind that this is not a very secure frontend. Anyone who has " "access to the computer being configured can currently access the web server " "and configure things while this frontend is running. So this is more of a " "proof of concept than anything." msgstr "" "Behalten Sie im Kopf, dass diese Benutzerschnittstelle nicht sehr sicher " "ist. Jeder, der auf den zu konfigurierenden Rechner Zugriff hat, kann " "derzeit auf den den Web-Server zugreifen und Dinge konfigurieren, während " "diese Schnittstelle läuft. Also ist dies mehr eine Konzeptstudie als alles " "andere." #. type: Plain text #: debconf.7:133 #, no-wrap msgid "" "You can change the default frontend debconf uses by reconfiguring\n" "debconf. On the other hand, if you just want to change the frontend\n" "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n" "the name of the frontend to use. For example:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" msgstr "" "Sie können die standardmäßige Benutzerschnittstelle, die Debconf benutzt,\n" "ändern, indem Sie Debconf erneut konfigurieren. Falls Sie andererseits\n" "die Benutzerschnittstelle nur für kurze Zeit ändern wollen, können\n" "Sie die Umgebungsvariable DEBIAN_FRONTEND auf den Namen der zu benutzenden\n" "Benutzerschnittstelle setzen. Zum Beispiel:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" # FIXME Double spaces #. type: Plain text #: debconf.7:141 msgid "" "The B(8) and B(8) commands also let " "you pass I<--frontend=> to them, followed by the frontend you want them to " "use." msgstr "" "Die Befehle B(8) und B(8) lassen sich " "auch I<--frontend> übergeben, gefolgt von der Benutzerschnittstelle, die Sie " "benutzen sollen." #. type: Plain text #: debconf.7:145 msgid "" "Note that not all frontends will work in all circumstances. If a frontend " "fails to start up for some reason, debconf will print out a message " "explaining why, and fall back to the next-most similar frontend." msgstr "" "Beachten Sie, dass nicht alle Benutzerschnittstellen unter allen Umständen " "funktionieren. Falls eine Benutzerschnittstelle aus irgendwelchen Gründen " "scheitert, gibt Debconf eine Meldung aus, warum, und greift auf die " "ähnlichste Benutzerschnittstelle zurück." #. type: SH #: debconf.7:145 #, no-wrap msgid "Priorities" msgstr "Prioritäten" #. type: Plain text #: debconf.7:152 msgid "" "Another nice feature of debconf is that the questions it asks you are " "prioritized. If you don't want to be bothered about every little thing, you " "can set up debconf to only ask you the most important questions. On the " "other hand, if you are a control freak, you can make it show you all " "questions. Each question has a priority. In increasing order of importance:" msgstr "" "Ein weitere nette Funktionalität von Debconf ist, dass die Fragen, die es " "Ihnen stellt, priorisiert sind. Falls Sie nicht mit jeder kleinen Sache " "belästigt werden wollen, können Sie Debconf so einstellen, dass es Ihnen nur " "die wichtigsten Fragen stellt. Falls Sie auf der anderen Seite ein Kontroll-" "Freak sind, können Sie es Ihnen alle Fragen zeigen lassen. Jede Frage hat " "eine Priorität. In nach Wichtigkeit aufsteigender Folge:" #. type: TP #: debconf.7:152 debconf-devel.7:294 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:156 msgid "" "Very trivial questions that have defaults that will work in the vast " "majority of cases." msgstr "" "Sehr triviale Fragen, die Voreinstellungen haben, die in den allermeisten " "Fällen funktionieren." #. type: TP #: debconf.7:156 debconf-devel.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:159 msgid "Normal questions that have reasonable defaults." msgstr "Normale Fragen, die vernünftige Voreinstellungen haben." #. type: TP #: debconf.7:159 debconf-devel.7:301 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:162 msgid "Questions that don't have a reasonable default." msgstr "Fragen, die keine vernünftige Voreinstellung haben." #. type: TP #: debconf.7:162 debconf-devel.7:304 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:165 msgid "Questions that you really, really need to see (or else)." msgstr "Fragen, die Sie wirklich, wirklich sehen müssen (ansonsten ...)." # FIXME Double spaces #. type: Plain text #: debconf.7:175 msgid "" "Only questions with a priority equal to or greater than the priority you " "choose will be shown to you. You can set the priority value by reconfiguring " "debconf, or temporarily by passing I<--priority=> followed by the value to " "the B(8) and B(8) commands, or by " "setting the DEBIAN_PRIORITY environment variable." msgstr "" "Nur Fragen mit einer Priorität gleich oder größer der Priorität, die Sie " "wählen, werden Ihnen gezeigt. Sie können den Prioritätswert setzen, indem " "Sie Debconf erneut konfigurieren, oder temporär, indem Sie I<--priority> " "gefolgt von dem Wert an die Befehle B(8) und B(8) übergeben oder durch Setzen der Umgebungsvariablen " "DEBIAN_PRIORITY." #. type: SH #: debconf.7:175 #, no-wrap msgid "Backend Database" msgstr "Datenbanken-Backend" # FIXME Double space #. type: Plain text #: debconf.7:187 msgid "" "Debconf uses a rather flexible and potentially complicated backend database " "for storing data such as the answers to questions. The file B is used to configure this database. If you need to set up something " "complicated, like make debconf read a remote database to get defaults, with " "local overrides, read the B(5) man page for all the gory " "details. Generally, the backend database is located in B ." msgstr "" "Debconf benutzt ein ziemlich flexibles und potenziell kompliziertes " "Datenbanken-Backend, um solche Daten wie die Antworten auf Fragen zu " "speichern. Die Datei B wird benutzt, um diese Datenbank " "zu konfigurieren. Falls Sie etwas Kompliziertes aufsetzen müssen, etwa " "Debconf eine entfernte Datenbank für Voreinstellungen mit lokalen " "Aufhebungen lesen zu lassen, schauen Sie sich die Handbuchseite B(5) für alle Details an. Generell befindet sich das Datenbanken-Backend " "unter B." #. type: SH #: debconf.7:187 #, no-wrap msgid "Unattended Package Installation" msgstr "Unbeaufsichtigte Paket-Installation" #. type: Plain text #: debconf.7:194 msgid "" "If you have many machines to manage you will sometimes find yourself in the " "position of needing to perform an unattended installation or upgrade of " "packages on many systems, when the default answers to some configuration " "questions are not acceptable. There are many ways to approach this; all " "involve setting up a database and making debconf use it to get the answers " "you want." msgstr "" "Falls Sie viele Maschinen verwalten müssen, finden Sie sich manchmal in der " "Situation, eine unbeaufsichtigte Installation oder Aktualisierung von " "Paketen auf vielen Systemen vornehmen zu müssen, bei der die vorgegebenen " "Antworten auf manche Konfigurationsfragen nicht akzeptabel sind. Es gibt " "viele Wege, dies zu erreichen; alle schließen ein, eine Datenbank " "aufzusetzen und sie Debconf benutzen lassen, um die Antworten zu bekommen, " "die Sie wollen." # FIXME Double space #. type: Plain text #: debconf.7:198 msgid "" "You should really read B(5) before this section, as you need " "to understand how debconf's databases work." msgstr "" "Sie sollten vor diesem Abschnitt wirklich B(5) lesen, weil Sie " "verstehen müssen, wie Debconfs Datenbanken funktionieren." # FIXME Double space #. type: Plain text #: debconf.7:205 msgid "" "The easiest way to set up the database is to install the packages on one " "machine and answer their questions as usual. Or you might just use B(8) to configure a set of packages without actually installing " "them. Or you might even decide to write a plain text debconf database by " "hand or something." msgstr "" "Der einfachste Weg, um die Datenbank aufzusetzen, ist es, die Pakete auf " "einer Maschine zu installieren und ihre Fragen wie üblich zu beantworten. " "Oder Sie könnten einfach B(8) benutzen, um eine Reihe von " "Paketen zu konfigurieren, ohne sie tatsächlich zu installieren. Oder Sie " "mögen sich sogar dazu entscheiden, eine Klartext-Debconf-Datenbank von Hand " "zu schreiben, oder soetwas." #. type: Plain text #: debconf.7:209 msgid "" "Once you have the database, you need to figure out how to make the remote " "systems use it. This depends of course on the configuration of those systems " "and what database types they are set up to use." msgstr "" "Sobald Sie die Datenbank haben, müssen Sie herausfinden, wie Sie die Systeme " "in der Ferne dazu bekommen, sie zu benutzen. Dies hängt selbstverständlich " "von der Konfiguration dieser Systeme ab und davon, für die Benutzung welcher " "Datenbanken-Typen sie aufgesetzt sind." #. type: Plain text #: debconf.7:213 msgid "" "If you are using the LDAP debconf database, an entire network of debian " "machines can also have any or all package installation questions answered " "automatically by a single LDAP server." msgstr "" "Falls Sie die LDAP-Debconf-Datenbank benutzen, kann ein gesamtes Netzwerk " "von Debian-Maschinen einige oder alle Fragen zur Paket-Installation " "automatisch von einem einzelnen LDAP-Server beantwortet bekommen." #. type: Plain text #: debconf.7:222 msgid "" "But perhaps you're using something a little bit easier to set up like, say, " "the default debconf database configuration, or you just don't want your " "remote systems to use LDAP all the time. In this case the best approach is " "to temporarily configure the remote systems to stack your database " "underneath their own existing databases, so they pull default values out of " "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and " "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample " "use:" msgstr "" "Aber vielleicht benutzen Sie etwas, das ein wenig leichter aufzusetzen ist, " "wie, sagen wir, die standardmäßige Debconf-Datenbanken-Konfiguration oder " "Sie wollen einfach nicht, dass Ihre System in der Ferne LDAP die ganze Zeit " "benutzen. In diesem Falle ist der beste Ansatz, die Systeme in der Ferne " "temporär so zu konfigurieren, dass sie Ihre Datenbank unter ihre eigenen " "existierenden Datenbanken stapeln, so dass sie vorgegebene Werte aus ihr " "herausziehen können. Debconf bietet zwei Umgebungvariablen, " "DEBCONF_DB_FALLBACK und DEBCONF_DB_OVERRIDE, um es einfach zu machen, dies " "im Vorbeigehen zu tun. Hier ist eine Beispielanwendung:" #. type: Plain text #: debconf.7:226 #, no-wrap msgid "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" msgstr "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" #. type: Plain text #: debconf.7:232 msgid "" "This makes the debconf on the remote host read in the data that is piped " "across the ssh connection and interpret it as a plain text format debconf " "database. It then uses that database as a fallback database -- a read-only " "database that is queried for answers to questions if the system's main " "debconf database lacks answers." msgstr "" "Dies lässt das Debconf auf dem Rechner in der Ferne die Daten, die über die " "SSH-Verbindung transferiert werden, einlesen und als eine Debconf-Datenbank " "im Klartextformat interpretieren. Dann benutzt es diese Datenbank als " "Rückgriffsdatenbank -- eine nur-lesende Datenbank, die nach Antworten zu " "Fragen abgefragt wird, falls die Haupt-Debconf-Datenbank des Systems keine " "Antworten bietet." #. type: Plain text #: debconf.7:234 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:" msgstr "Noch ein Weg, die Umgebungsvariable DEBCONF_DB_FALLBACK zu benutzen:" #. type: Plain text #: debconf.7:237 #, no-wrap msgid "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" msgstr "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" #. type: Plain text #: debconf.7:242 msgid "" "Here ssh is used to set up a tunneled LDAP connection and run debconf. " "Debconf is told to use the LDAP server as the fallback database. Note the " "use of \"{host:localhost}\" to configure how debconf accesses the LDAP " "database by providing the \"host\" field with a value of \"localhost\"." msgstr "" "Hier wird SSH benutzt, um eine getunnelte LDAP-Verbindung aufzusetzen und " "Debconf auszuführen. Debconf soll den LDAP-Server als Rückgriffs-Datenbank " "benutzen. Beachten Sie die Benutzung von »{host:localhost}«, um zu " "konfigurieren, wie Debconf auf die LDAP-Datenbank zugreift, indem das Feld " "»host« mit dem Wert »localhost« geliefert wird." #. type: Plain text #: debconf.7:244 msgid "Here's another method:" msgstr "Noch eine Methode:" #. type: Plain text #: debconf.7:247 #, no-wrap msgid "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" msgstr "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" #. type: Plain text #: debconf.7:252 msgid "" "Here you copy the database over with scp, and then ssh over and make debconf " "use the file you copied over. This illustrates a shorthand you can use in " "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it " "defaults to \"filename\"." msgstr "" "Hier kopieren Sie die Datenbank mit scp hinüber, und dann öffnen Sie SSH und " "lassen Debconf die hinüber-kopierte Datei benutzen. Dies illustriert einen " "Abkürzung, die Sie bei den Parametern für DEBCONF_DB_FALLBACK benutzen " "können -- falls der Feldname ausgelassen wird, wird »filename« angenommen." #. type: Plain text #: debconf.7:261 msgid "" "There is only one problem with these uses of the DEBCONF_DB_FALLBACK " "parameter: While the fallback database can provide answers to questions the " "other debconf databases have never seen, it is only queried as a fallback; " "after the other databases. If you need to instead temporarily override an " "existing value on the remote host, you should instead use the " "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a " "temporary database, but this database is consulted before any others, and " "can be used to override existing values." msgstr "" "Es gibt nur ein Problem mit diesen Anwendungen des Parameters " "DEBCONF_DB_FALLBACK: Während die Rückgriffsdatenbank Antworten auf Fragen " "liefern kann, die die anderen Datenbanken noch nicht gesehen haben, wird sie " "nur als Rückgriff abgefragt; nach den anderen Datenbanken. Falls Sie " "stattdessen auf dem entfernten Rechner einen bestehenden Wert temporär außer " "Kraft setzen müssen, sollten Sie stattdessen die Variable " "DEBCONF_DB_OVERRIDE benutzen. Wie DEBCONF_DB_FALLBACK setzt sie eine " "temporäre Datenbank auf, aber diese Datenbank wird vor allen anderen " "befragt, und kann benutzt werden, um bestehende Werte außer Kraft zu setzen." #. type: SH #: debconf.7:261 #, no-wrap msgid "Developing for Debconf" msgstr "Entwickeln für Debconf" # FIXME Double space #. type: Plain text #: debconf.7:266 msgid "" "Package developers and others who want to develop packages that use debconf " "should read B(7) ." msgstr "" "Paket-Entwickler und andere, die Pakete entwickeln wollen, die Debconf " "benutzen, sollten B(7) lesen." #. type: Plain text #: debconf.7:274 msgid "" "Briefly, debconf communicates with maintainer scripts or other programs via " "standard input and output, using a simple line-oriented command language " "similar to that used by common internet protocols such as SMTP. Programs use " "this protocol to ask debconf to display questions to the user, and retrieve " "the user's answers. The questions themselves are defined in a separate file, " "called the \"templates file\", which has a format not unlike a debian " "control file." msgstr "" "Kurz gesagt kommuniziert Debconf mit Maintainer-Skripten oder anderen " "Programmen über die Standardein- und -ausgabe, unter Benutzung einer " "einfachen Befehlssprache ähnlich denen, wie sie von gängigen Internet-" "Protokollen wie SMTP benutzt werden. Programme benutzen dieses Protokoll, um " "Debconf zu bitten, Fragen an den Benutzer zu stellen und die Antworten des " "Benutzers einzuholen. Die Fragen selbst sind in einer eigenen Datei, " "»Vorlagendatei« genannt, definiert, die ein Format ähnlich einer Debian-" "Control-Datei hat." #. type: Plain text #: debconf.7:278 msgid "" "Debian packages which use debconf typically provide both a templates file " "and a \"config\" script (run to preconfigure the package) in the control " "metadata section of the package." msgstr "" "Debian-Pakete, die Debconf benutzen, liefern typischerweise eine " "Vorlagendatei »templates« und ein Skript »config« (welches ausgeführt wird, " "um das Paket vorzukonfigurieren) in dem Abschnitt für die Kontroll-Metadaten " "des Pakets aus." #. type: SH #: debconf.7:278 #, no-wrap msgid "ENVIRONMENT" msgstr "UMGEBUNG" #. type: TP #: debconf.7:279 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:282 msgid "Used to temporarily change the frontend debconf uses. See above." msgstr "" "Wird benutzt, um temporär die Benutzerschnittstelle zu ändern, die Debconf " "benutzt. Siehe oben." #. type: TP #: debconf.7:282 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:286 msgid "" "Used to temporarily change the minimum priority of question debconf will " "display. See above." msgstr "" "Wird benutzt, um temporär die Schwell-Priorität der von Debconf angezeigten " "Fragen zu ändern. Siehe oben." #. type: TP #: debconf.7:286 debconf-devel.7:576 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:292 msgid "" "Turns on debugging output on standard error. May be set to a facility name " "or a regular expression which matches a facility name (such as '.*' to " "output all debug info). The facility names include:" msgstr "" "Schaltet Ausgaben zur Fehlersuche auf der Standardfehlerausgabe ein. Kann " "auf den Namen einer Gruppe oder einen regulären Ausdruck, der mit den Namen " "von Gruppen übereinstimmt, gesetzt werden (beispielsweise ».*« um alle " "Fehlersuchinformationen auszugeben). Die Gruppennamen sind:" #. type: TP #: debconf.7:292 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:295 msgid "Debugging info of interest to a debconf user." msgstr "" "Informationen zur Fehlersuche, die für einen Debconf-Benutzer von Interesse " "sind." #. type: TP #: debconf.7:295 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:298 msgid "Debugging info of interest to a package developer." msgstr "" "Informationen zur Fehlersuche, die für einen Paket-Entwickler von Interesse " "sind." #. type: TP #: debconf.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:301 msgid "Debugging info about the backend database." msgstr "Informationen zur Fehlersuche über die Backend-Datenbank." #. type: TP #: debconf.7:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:306 msgid "" "Set to \"yes\" to disable some warnings that debconf may display. Does not " "suppress display of fatal errors." msgstr "" "Setzen Sie dies auf »yes«, um einige Warnungen zu deaktivieren, die Debconf " "anzeigen könnte. Unterdrückt keine fatalen Fehler." #. type: TP #: debconf.7:306 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:310 msgid "" "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on " "the verbiage as much as possible." msgstr "" "Setzen Sie dies auf »yes«, um den knappen Modus zu aktivieren, in dem " "Debconfs Benutzerschnittstellen den Wortreichtum so weit wie möglich " "einschränken." #. type: TP #: debconf.7:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:320 msgid "" "Stack a database after the normally used databases, so that it is used as a " "fallback to get configuration information from. See \"Unattended Package " "Installation\" above. If the value of the variable is the name of an " "existing database in debconf.conf, then that database will be used. " "Otherwise, the environment variable can be used to configure a database on " "the fly, by telling the type of database, and optionally passing field:value " "settings, inside curly braces after the type. Spaces are used to separate " "fields, so you cannot specify a field value containing whitespace." msgstr "" "Stapel eine Datenbank nach den normalerweise benutzten Datenbanken, so dass " "sie als ein Rückgriff benutzt wird, um Konfigurationsinformationen zu " "beziehen. Siehe oben »Unbeaufsichtigte Paket-Installation«. Falls der Wert " "der Variablen ein Name einer existierenden Datenbank in debconf.conf ist " "wird diese Datenbank benutzt. Ansonsten kann die Umgebungsvariable benutzt " "werden, um eine Datenbank im Vorbeigehen (»on the fly«) zu konfigurieren, " "indem der Typ der Datenbank genannt und optional Feld:Wert-Einstellungen in " "geschwungenen Klammern nach dem Typ übergeben werden. Leerzeichen werden " "benutzt, um Felder zu trennen, also können Sie keinen Feldwert angeben, der " "Leerrzeichen enthält." #. type: Plain text #: debconf.7:323 #, no-wrap msgid "" "Thus, this uses the fallbackdb in debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" msgstr "" "Dieses benutzt also die Datenbank fallbackdb in debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" #. type: Plain text #: debconf.7:327 #, no-wrap msgid "" "While this sets up a new database of type File, and tells it a filename to\n" "use and turns off backups:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" msgstr "" "Während dies eine neue Datenbank vom Typ »File« aufsetzt und ihr den zu\n" "benutzenden Dateinamen und die Anweisung, das Erstellen von\n" "Sicherheitskopien zu deaktivieren, übergibt:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" #. type: Plain text #: debconf.7:330 #, no-wrap msgid "" "And as a shorthand, this sets up a database of type File with a filename:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" msgstr "" "Und als Kurzform setzt dies eine Datenbank vom Typ »File« mit einem\n" "Dateinamen auf:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" #. type: Plain text #: debconf.7:333 msgid "" "Note that if a fallback database is set up on the fly, it will be read-only " "by default." msgstr "" "Beachten Sie, dass eine Rückgriffsdatenbank, falls sie im Vorbeigehen " "aufgesetzt wird, standardmäßig nur-lesend ist." #. type: TP #: debconf.7:333 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:338 msgid "" "Stack a database before the normally used databases, so that it can override " "values from them. The value of the variable works the same as does the value " "of DEBCONF_DB_FALLBACK." msgstr "" "Stapelt eine Datenbank vor die normalerweise benutzten Datenbanken, so dass " "sie Werte aus ihnen überstimmen kann. Der Wert dieser Variablen funktioniert " "auf dieselbe Weise wie der Wert von DEBCONF_DB_FALLBACK." #. type: TP #: debconf.7:338 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:343 msgid "" "Use a given database instead of the normally used databases. This may be " "useful for testing with a separate database without having to create a " "separate debconf.conf, or to avoid locking the normal databases." msgstr "" "Benutze eine gegebene Datenbank anstelle der normalerweise benutzten " "Datenbanken. Dies kann nützlich sein, um mit einer separaten Datenbank zu " "testen, ohne dafür eine eigene debconf.conf zu erstellen, oder um das " "Sperren der normalen Datenbanken zu vermeiden." #. type: TP #: debconf.7:343 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:349 msgid "" "If this environment variable is set, debconf will ignore a user's ~/." "debconfrc file, and use the system one instead. If it is set to the name of " "a regular file, debconf will use that file in preference to the system " "configuration files." msgstr "" "Falls diese Umgebungsvariable gesetzt ist, ignoriert Debconf die Datei ~/." "debconfrc des Benutzer, und benutzt stattdessen die systemweite debconf." "conf. Falls diese auf den Namen einer regulären Datei gesetzt ist, zieht " "Debconf diese Datei der systemweiten Konfigurationsdatei vor." #. type: TP #: debconf.7:349 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:353 msgid "" "If this environment variable is set, debconf will use dialog in preference " "to whiptail for the dialog frontend." msgstr "" "Falls diese Umgebungsvariable gesetzt ist, bevorzugt Debconf B " "gegenüber B für die Benutzerschnittstelle Dialog." #. type: TP #: debconf.7:353 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:357 msgid "" "If this environment variable is set, debconf will use Xdialog in preference " "to whiptail for the dialog frontend." msgstr "" "Falls diese Umgebungsvariable gesetzt ist, bevorzugt Debconf B vor " "B für die Benutzerschnittstelle Dialog." #. type: TP #: debconf.7:357 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:361 msgid "" "Set to \"true\" to cause the seen flag to be set for questions asked in the " "noninteractive frontend." msgstr "" "Setzen Sie diese auf »true«, damit die Markierung gesehen (»seen«) für " "Fragen, die in der nicht-interaktiven (»noninteractive«) Schnittstelle " "gestellt werden, gesetzt wird." #. type: SH #: debconf.7:361 #, no-wrap msgid "BUGS" msgstr "FEHLER" #. type: Plain text #: debconf.7:363 msgid "Probably quite a few, there's a lot of code here." msgstr "möglicherweise einige, es gibt hier eine Menge an Kode." #. type: Plain text #: debconf.7:365 msgid "" "If you do file a bug report, be sure to include the following information:" msgstr "" "Falls Sie einen Fehlerbericht einreichen (auf Englisch!), stellen Sie " "sicher, dass Sie die folgenden Informationen einbeziehen:" #. type: TP #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484 #: debconf-devel.7:489 #, no-wrap msgid "B<*>" msgstr "B<*>" #. type: Plain text #: debconf.7:368 msgid "The debconf frontend you were using when the problem occurred" msgstr "" "Die Debconf-Benutzerschnittstelle, die Sie benutzten, als der Fehler auftrat." #. type: Plain text #: debconf.7:371 msgid "What you did to trigger the problem." msgstr "Was Sie taten, um das Problem auszulösen." #. type: Plain text #: debconf.7:376 msgid "" "The full text of any error messages. If you can reproduce the bug, do so " "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot." msgstr "" "Den vollständigen Text jeder Fehlermeldung. Falls Sie den Fehler " "reproduzieren können, tun Sie dies mit auf gesetztem und exportiertem " "DEBCONF_DEBUG='.*'.Dies beschleunigt die Fehlersuche sehr." #. type: Plain text #: debconf.7:382 msgid "" "B(5), B(7), B(8), B(8), B(1)," msgstr "" "B(5), B(7), B(8), B(8), B(1)," #. type: TH #: debconf-devel.7:1 #, no-wrap msgid "DEBCONF-DEVEL" msgstr "DEBCONF-DEVEL" #. type: Plain text #: debconf-devel.7:4 msgid "debconf - developers guide" msgstr "debconf - Leitfaden für Entwickler" #. type: Plain text #: debconf-devel.7:6 msgid "This is a guide for developing packages that use debconf." msgstr "" "Dies ist ein Leitfaden zum Entwickeln von Paketen, die Debconf benutzen." #. type: Plain text #: debconf-devel.7:9 msgid "" "This manual assumes that you are familiar with debconf as a user, and are " "familiar with the basics of debian package construction." msgstr "" "Dieses Handbuch nimmt an, dass Sie als Benutzer mit Debconf und mit den " "Grundlagen der Konstruktion von Debian-Paketen vertraut sind." #. type: Plain text #: debconf-devel.7:18 msgid "" "This manual begins by explaining two new files that are added to debian " "packages that use debconf. Then it explains how the debconf protocol works, " "and points you at some libraries that will let your programs speak the " "protocol. It discusses other maintainer scripts that debconf is typically " "used in: the postinst and postrm scripts. Then moves on to more advanced " "topics like shared debconf templates, debugging, and some common techniques " "and pitfalls of programming with debconf. It closes with a discussion of " "debconf's current shortcomings." msgstr "" "Dieses Handbuch beginnt, indem zwei neue Dateien erklärt werden, die Debian-" "Paketen hinzugefügt werden, die Debconf benutzen. Dann erklärt es, wie das " "Debconf-Protokoll arbeitet und verweist Sie auf einige Bibliotheken, die " "Ihre Programme das Protokoll sprechen lassen. Es diskutiert andere Betreuer-" "Skripte, in denen Debconf typischerweise benutzt wird: die Skripte postinst " "und postrm. Dann geht es weiter zu fortgeschritteneren Themen, wie gemeinsam " "benutzte Debconf-Vorlagen, Fehlersuche und einige allgemeine Techniken und " "Stolperfallen der Programmierung mit Debconf. Es schließt mit einer " "Diskussion Debconfs gegenwärtiger Einschränkungen." #. type: SH #: debconf-devel.7:18 #, no-wrap msgid "THE CONFIG SCRIPT" msgstr "DAS SKRIPT CONFIG" #. type: Plain text #: debconf-devel.7:23 msgid "" "Debconf adds an additional maintainer script, the config script, to the set " "of maintainer scripts that can be in debian packages (the postinst, preinst, " "postrm, and prerm). The config script is responsible for asking any " "questions necessary to configure the package." msgstr "" "Debconf fügt ein zusätzliches Betreuer-Skript, das Skript config, zu der " "Reihe von Betreuer-Skripten, die in Debian-Paketen sein können (preinst, " "postinst, prerm und postrm), hinzu. Das Skript config ist verantwortlich " "dafür, alle für die Konfiguration des Paketes notwendigen Fragen zu stellen." #. type: Plain text #: debconf-devel.7:28 msgid "" "Note: It is a little confusing that dpkg refers to running a package's " "postinst script as \"configuring\" the package, since a package that uses " "debconf is often fully pre-configured, by its config script, before the " "postinst ever runs. Oh well." msgstr "" "Anmerkung: Es ist ein wenig verwirrend, dass dpkg das Ausführen des Skriptes " "postinst eines Paketes als »Konfiguration« dieses Paketes bezeichnet, weil " "ein Paket, das Debconf benutzt, oft vor der ersten Ausführung von postinst " "durch sein Skript config bereits voll vorkonfiguriert ist. Ach ja." #. type: Plain text #: debconf-devel.7:34 msgid "" "Like the postinst, the config script is passed two parameters when it is " "run. The first tells what action is being performed, and the second is the " "version of the package that is currently installed. So, like in a postinst, " "you can use dpkg --compare-versions on $2 to make some behavior happen only " "on upgrade from a particular version of a package, and things like that." msgstr "" "Wie dem Skript postinst werden config zwei Parameter übergeben wenn es " "ausgeführt wird. Der erste sagt, welche Aktion durchgeführt wird und der " "zweite ist die Version des Paketes, die gegenwärtig installiert ist. Also " "können Sie, wie in postinst, dpkg --compare-versions mit $2 benutzen, um ein " "bestimmtes Verhalten nur erfolgen zu lassen, wenn von einer bestimmten " "Version des Pakets aktualisiert wird und ähnliche Sachen." #. type: Plain text #: debconf-devel.7:36 msgid "The config script can be run in one of three ways:" msgstr "Das Skript config kann auf eine von drei Arten aufgerufen werden:" #. type: TP #: debconf-devel.7:36 #, no-wrap msgid "B<1>" msgstr "B<1>" #. type: Plain text #: debconf-devel.7:40 msgid "" "If a package is pre-configured, with dpkg-preconfigure, its config script is " "run, and is passed the parameters \"configure\", and installed-version." msgstr "" "Falls ein Paket mit dpkg-preconfigure vorkonfiguriert wird, wird sein Skript " "config aufgerufen und ihm werden die Parameter »configure« und die " "installierte Version übergeben." #. type: TP #: debconf-devel.7:40 #, no-wrap msgid "B<2>" msgstr "B<2>" #. type: Plain text #: debconf-devel.7:47 msgid "" "When a package's postinst is run, debconf will try to run the config script " "then too, and it will be passed the same parameters it was passed when it is " "pre-configured. This is necessary because the package might not have been " "pre-configured, and the config script still needs to get a chance to run. " "See HACKS for details." msgstr "" "Wenn das postinst eines Paketes ausgeführt wird, versucht Debconf auch das " "Skript config auszuführen und ihm werden dieselben Parameter übergeben, die " "ihm übergeben werden, wenn es vorkonfiguriert wird. Dies ist notwendig, weil " "das Paket möglicherweise nicht vor-konfiguriert wurde und das Skript config " "noch eine Chance zum Laufen braucht. Siehe HACKS für Details." #. type: TP #: debconf-devel.7:47 #, no-wrap msgid "B<3>" msgstr "B<3>" #. type: Plain text #: debconf-devel.7:52 msgid "" "If a package is reconfigured, with dpkg-reconfigure, its config script it " "run, and is passed the parameters \"reconfigure\" and installed-version." msgstr "" "Falls ein Paket mit dpkg-reconfigure erneut konfiguriert wird, wird sein " "Skript config ausgeführt und ihm werden die Parameter »reconfigure« und " "installierte Version übergeben." #. type: Plain text #: debconf-devel.7:58 msgid "" "Note that since a typical package install or upgrade using apt runs steps 1 " "and 2, the config script will typically be run twice. It should do nothing " "the second time (to ask questions twice in a row is annoying), and it should " "definitely be idempotent. Luckily, debconf avoids repeating questions by " "default, so this is generally easy to accomplish." msgstr "" "Beachten Sie, da es typisch ist, ein Paket mit APT zu installieren oder zu " "aktualisieren, Schritte eins und zwei laufen, das Skript config also zweimal " "ausgeführt wird. Es sollte beim zweiten Mal nichts tun (zweimal " "hintereinander Fragen zu stellen ist nervig) und es sollte definitiv " "idempotent sein. Glücklicherweise vermeidet es Debconf standardmäßig, Fragen " "wiederholt zu stellen, so dass dies generell einfach zu erreichen ist." #. type: Plain text #: debconf-devel.7:64 msgid "" "Note that the config script is run before the package is unpacked. It should " "only use commands that are in essential packages. The only dependency of " "your package that is guaranteed to be met when its config script is run is a " "dependency (possibly versioned) on debconf itself." msgstr "" "Beachten Sie, dass das Skript config ausgeführt wird, bevor das Paket " "entpackt wird. Es sollte nur Befehle benutzen, die in essenziellen Paketen " "enthalten sind. Die einzige Abhängigkeit Ihres Paketes, die " "garantierterweise erfüllt ist, wenn sein Skript config läuft, ist eine " "(möglicherweise versionierte) Abhängigkeit von Debconf selbst." #. type: Plain text #: debconf-devel.7:70 msgid "" "The config script should not need to modify the filesystem at all. It just " "examines the state of the system, and asks questions, and debconf stores the " "answers to be acted on later by the postinst script. Conversely, the " "postinst script should almost never use debconf to ask questions, but should " "instead act on the answers to questions asked by the config script." msgstr "" "Das Skript config sollte überhaupt nicht das Dateisystem verändern müssen. " "Es examiniert einfach den Zustand des Systems und stellt Fragen und Debconf " "speichert die Antworten, damit später vom Skript postinst nach Ihnen " "gehandelt wird. Umgekehrt sollte das Skript postinst fast nie Debconf " "benutzen, um Fragen zu stellen, sondern sollte stattdessen nach den " "Antworten auf die Fragen, die das Skript config gestellt hat, handeln." #. type: SH #: debconf-devel.7:70 #, no-wrap msgid "THE TEMPLATES FILE" msgstr "DIE DATEI TEMPLATES" #. type: Plain text #: debconf-devel.7:73 msgid "" "A package that uses debconf probably wants to ask some questions. These " "questions are stored, in template form, in the templates file." msgstr "" "Ein Paket, das Debconf benutzt, möchte möglicherweise einige Fragen stellen. " "Diese Fragen werden in Vorlagenform in der Datei »templates« gespeichert." #. type: Plain text #: debconf-devel.7:78 msgid "" "Like the config script, the templates file is put in the control.tar.gz " "section of a deb. Its format is similar to a debian control file; a set of " "stanzas separated by blank lines, with each stanza having a RFC822-like form:" msgstr "" "Wie das Skript config, wird die Datei templates in dem Abschnitt control.tar." "gz eines .deb abgelegt. Ihr Format ist ähnlich dem einer Debian-Control-" "Datei; eine Reihe von durch Leerzeichen getrennten Instanzen, wobei jeder " "dieser Instanzen eine Form ähnlich RFC822 hat: " #. type: Plain text #: debconf-devel.7:94 #, no-wrap msgid "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: This is a sample string question.\n" " This is its extended description.\n" " .\n" " Notice that:\n" " - Like in a debian package description, a dot\n" " on its own line sets off a new paragraph.\n" " - Most text is word-wrapped, but doubly-indented\n" " text is left alone, so you can use it for lists\n" " of items, like this list. Be careful, since\n" " it is not word-wrapped, if it's too wide\n" " it will look bad. Using it for short items\n" " is best (so this is a bad example).\n" msgstr "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: Dies ist ein Muster einer Zeichenkettenfrage.\n" " Dies ist die erweiterte Beschreibung.\n" " .\n" " Beachten Sie dass:\n" " - Wie in einer Paketbeschreibung Debians,\n" " leitet ein Punkt auf seiner eigenen Zeile\n" " einen neuen Absatz ein.\n" " - Der meiste Text wird wortweise umbrochen,\n" " aber zweifach eingerückter Text wird\n" " belassen, so dass Sie dies für Listen von\n" " Elementen benutzen können, wie diese Liste.\n" " Seien Sie vorsichtig, weil der Text nicht\n" " wortweise umbrochen wird, sieht er\n" " schlecht aus, falls er zu breit ist. Es für\n" " kurze Elemente benutzen ist am Besten\n" " (also ist dies ein schlechtes Beispiel).\n" #. type: Plain text #: debconf-devel.7:99 #, no-wrap msgid "" " Template: foo/baz\n" " Type: boolean\n" " Description: Clear enough, no?\n" " This is another question, of boolean type.\n" msgstr "" " Template: foo/baz\n" " Type: boolean\n" " Description: Klar genug, nein?\n" " Dies ist eine weitere Frage, vom Booleschen Typ.\n" #. type: Plain text #: debconf-devel.7:103 msgid "" "For some real-life examples of templates files, see /var/lib/dpkg/info/" "debconf.templates, and other .templates files in that directory." msgstr "" "Für einige Beispiele von Vorlagendatei aus dem wahren Leben, siehe /var\\:/" "lib\\:/dpkg\\:/info\\:/debconf\\:.templates und andere auf .templates " "endende Dateien in dem Verzeichnis." #. type: Plain text #: debconf-devel.7:105 msgid "Let's look at each of the fields in turn.." msgstr "Lassen Sie uns jedes der Felder der Reihe nach ansehen:" #. type: TP #: debconf-devel.7:105 #, no-wrap msgid "B