# Danish translation debconf. # Copyright (C) 2012 Free Software Foundation, Inc. # This file is distributed under the same license as the debconf package. # Joe Hansen , 2012. # # ask questions -> stille spørgsmål # msgid "" msgstr "" "Project-Id-Version: debconf\n" "POT-Creation-Date: 2024-01-21 19:23+0000\n" "PO-Revision-Date: 2012-03-21 10:20+0100\n" "Last-Translator: Joe Hansen \n" "Language-Team: Danish \n" "Language: da\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #. type: SH #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3 #: ../../debconf-apt-progress:3 ../../debconf-escape:3 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2 #, no-wrap msgid "NAME" msgstr "NAVN" #. type: textblock #: ../../debconf:5 msgid "debconf - run a debconf-using program" msgstr "debconf - kør et debconf-brugende program" #. type: SH #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7 #: ../../debconf-apt-progress:7 ../../debconf-escape:7 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7 #: debconf.conf.5:12 confmodule.3:4 #, no-wrap msgid "SYNOPSIS" msgstr "OVERSIGT" #. type: verbatim #: ../../debconf:11 #, no-wrap msgid "" " debconf [options] command [args]\n" "\n" msgstr "" " debconf [tilvalg] kommando [argumenter]\n" "\n" #. type: SH #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20 #: ../../debconf-apt-progress:15 ../../debconf-escape:12 #: ../../debconf-communicate:13 ../../debconf-copydb:30 #: ../../debconf-getlang:21 ../../debconf-get-selections:11 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21 #: ../../debconf-set-selections:12 ../../debconf-show:13 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4 #, no-wrap msgid "DESCRIPTION" msgstr "BESKRIVELSE" #. type: textblock #: ../../debconf:15 msgid "" "Debconf is a configuration system for Debian packages. For a debconf " "overview and documentation for sysadmins, see L (in the debconf-" "doc package)." msgstr "" "Debconf er et konfigurationssystem for Debianpakker. For et overblik over " "debconf og dokumentation for systemadministratorer så se L (i " "pakken debconf-doc)." #. type: textblock #: ../../debconf:19 msgid "" "The B program runs a program under debconf's control, setting it up " "to talk with debconf on stdio. The program's output is expected to be " "debconf protocol commands, and it is expected to read result codes on stdin. " "See L for details about the debconf protocol." msgstr "" "Programmet B kører et program under debconfs kontrol, sætter det op " "til at snakke med debconf på stdio. Programmets uddata forventes at blive " "protokolkommandoer for debconf, og det forventes at læse resultatkoder på " "standardind. Se L for detaljer om debconf-protokollen." #. type: textblock #: ../../debconf:24 msgid "" "The command to be run under debconf must be specified in a way that will let " "your PATH find it." msgstr "" "Kommandoen der skal køres under debconf skal angives på en måde som vil lade " "din PATH finde den." #. type: textblock #: ../../debconf:27 msgid "" "This command is not the usual way that debconf is used. It's more typical " "for debconf to be used via L or L." msgstr "" "Denne kommando er ikke den normale måde som debconf bruges på. Det er mere " "typisk for debconf at blive brugt via L eller L." #. type: =head1 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21 msgid "OPTIONS" msgstr "TILVALG" #. type: =item #: ../../debconf:34 msgid "B<-o>I, B<--owner=>I" msgstr "B<-o>I, B<--owner=>I" #. type: textblock #: ../../debconf:36 msgid "" "Tell debconf what package the command it is running is a part of. This is " "necessary to get ownership of registered questions right, and to support " "unregister and purge commands properly." msgstr "" "Fortæl debconf fra hvilken pakke kommandoen den kører kommer fra. Dette er " "nødvendigt for at få ejerskab over registrerede spørgsmål korrekt, og for " "ordentligt at understøtte ikke registrerede kommandoer og kommandoer for " "afinstallation." #. type: =item #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25 msgid "B<-f>I, B<--frontend=>I" msgstr "B<-f>I, B<--frontend=>I" #. type: textblock #: ../../debconf:42 ../../dpkg-preconfigure:26 msgid "Select the frontend to use." msgstr "Vælg hvilken brugerflade der skal bruges." #. type: =item #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36 msgid "B<-p>I, B<--priority=>I" msgstr "B<-p>I, B<--priority=>I" #. type: textblock #: ../../debconf:46 msgid "Specify the minimum priority of question that will be displayed." msgstr "Angiv den minimale prioritet for spørgsmål som vil blive vist." #. type: =item #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42 msgid "B<--terse>" msgstr "B<--terse>" #. type: textblock #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44 msgid "Enables terse output mode. This affects only some frontends." msgstr "" "Aktiverer uddatatilstanden terse. Dette påvirker kun nogle brugerflader." #. type: =head1 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75 #: ../../debconf-set-selections:47 msgid "EXAMPLES" msgstr "EKSEMPLER" #. type: textblock #: ../../debconf:56 msgid "To debug a shell script that uses debconf, you might use:" msgstr "For at fejlsøge et skalskript, som bruger debconf, kan du bruge:" #. type: verbatim #: ../../debconf:58 #, no-wrap msgid "" " DEBCONF_DEBUG=developer debconf my-shell-prog\n" "\n" msgstr "" " DEBCONF_DEBUG=developer debconf mit-skal-program\n" "\n" #. type: textblock #: ../../debconf:60 msgid "Or, you might use this:" msgstr "Eller du kan bruge denne:" #. type: verbatim #: ../../debconf:62 #, no-wrap msgid "" " debconf --frontend=readline sh -x my-shell-prog\n" "\n" msgstr "" " debconf --frontend=readline sh -x mit-skal-program\n" "\n" #. type: SH #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154 #: ../../debconf-escape:21 ../../debconf-communicate:39 #: ../../debconf-copydb:102 ../../debconf-getlang:74 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376 #: debconf-devel.7:958 #, no-wrap msgid "SEE ALSO" msgstr "SE OGSÅ" #. type: textblock #: ../../debconf:66 msgid "L, L" msgstr "L, L" #. type: SH #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159 #: ../../debconf-escape:72 ../../debconf-communicate:74 #: ../../debconf-copydb:175 ../../debconf-getlang:256 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226 #: ../../debconf-show:152 ../../dpkg-preconfigure:258 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382 #: debconf-devel.7:968 #, no-wrap msgid "AUTHOR" msgstr "FORFATTER" #. type: textblock #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76 #: ../../debconf-copydb:177 ../../debconf-getlang:258 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311 msgid "Joey Hess " msgstr "Joey Hess " #. type: textblock #: ../../Debconf/Client/ConfModule.pm:5 msgid "Debconf::Client::ConfModule - client module for ConfModules" msgstr "Debconf::Client::ConfModule - klientmodul for ConfModules" #. type: verbatim #: ../../Debconf/Client/ConfModule.pm:9 #, no-wrap msgid "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Back button pressed.\n" " \t...\n" " }\n" " ...\n" "\n" msgstr "" " brug Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Slet tilbage trykke ned.\n" " \t...\n" " }\n" " ...\n" "\n" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:22 msgid "" "This is a module to ease writing ConfModules for Debian's configuration " "management system. It can communicate with a FrontEnd via the debconf " "protocol (which is documented in full in the debconf_specification in Debian " "policy)." msgstr "" "Dette er et modul til at gøre skrivning af ConfModules for Debians " "konfigurationshåndteringssystem nemmere. Modulet kan kommunikere med en " "brugerflade (FrontEnd) via debconf-protokollen (som er dokumenteret fuldt ud " "i debconf_specifikationen i politikken for Debian)." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:27 msgid "" "The design is that each command in the protocol is represented by one " "function in this module (with the name lower-cased). Call the function and " "pass in any parameters you want to follow the command. If the function is " "called in scalar context, it will return any textual return code. If it is " "called in list context, an array consisting of the numeric return code and " "the textual return code will be returned." msgstr "" "Designet er udført så at hver kommando i protokollen repræsenteres af en " "funktion i dette modul (med navnet i små bogstaver). Kald funktionen og " "skriv parametre du ønsker skal efterfølge kommandoen. Hvis funktionen kaldes " "i scalarkontekst, så vil den returnere en eventuel tekstmæssig returkode. " "Hvis den kaldes i listekontekst, så vil en array bestående af den numeriske " "returkode og den tekstmæssige returkode blive returneret." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:34 msgid "" "This module uses Exporter to export all functions it defines. To import " "everything, simply import \":all\"." msgstr "" "Dette modul bruger Exporter til at eksportere alle funktioner den definerer. " "For at importere alt, så importer »:all«." #. type: =item #: ../../Debconf/Client/ConfModule.pm:62 msgid "import" msgstr "import" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:64 msgid "" "Ensure that a FrontEnd is running. It's a little hackish. If " "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, " "one is started up automatically and stdin and out are connected to it. Note " "that this function is always run when the module is loaded in the usual way." msgstr "" "Sikr dig at en brugerflade (FrontEnd) kører. Det er lidt hackeragtigt. Hvis " "DEBIAN_HAS_FRONTEND er sat, så antages det at en brugerflade kører. Hvis " "ikke så startes en op automatisk og standardind og standardud forbindes til " "den. Bemærk at denne funktion altid køres når modulet indlæses på den " "normale måde." #. type: =item #: ../../Debconf/Client/ConfModule.pm:95 msgid "stop" msgstr "stop" # engelsk fejl? #. type: textblock #: ../../Debconf/Client/ConfModule.pm:97 msgid "" "The frontend doesn't send a return code here, so we cannot try to read it or " "we'll block." msgstr "" "Brugerfladen sender ikke en returkode her, så vi kan ikke forsøge at læse " "den eller vi blokerer den." #. type: =item #: ../../Debconf/Client/ConfModule.pm:107 msgid "AUTOLOAD" msgstr "AUTOINDLÆS" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:109 msgid "Creates handler functions for commands on the fly." msgstr "Opretter løbende håndtagsfunktioner for kommandoer." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:156 msgid "" "The debconf specification (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." msgstr "" "Debconf-specifikationen (/usr/share/doc/debian-policy/debconf_specification." "txt.gz)." #. type: textblock #: ../../debconf-apt-progress:5 msgid "" "debconf-apt-progress - install packages using debconf to display a progress " "bar" msgstr "" "debconf-apt-progress - installer pakker med brug af debconf for at vise en " "statusbjælke" #. type: verbatim #: ../../debconf-apt-progress:9 #, no-wrap msgid "" " debconf-apt-progress [--] command [args ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n" " debconf-apt-progress --stop\n" "\n" msgstr "" " debconf-apt-progress [--] kommando [argumenter ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from punkt --to punkt [--] kommando [argumenter ...]\n" " debconf-apt-progress --stop\n" "\n" #. type: textblock #: ../../debconf-apt-progress:17 msgid "" "B installs packages using debconf to display a " "progress bar. The given I should be any command-line apt frontend; " "specifically, it must send progress information to the file descriptor " "selected by the C configuration option, and must keep the " "file descriptors nominated by the C configuration option open " "when invoking debconf (directly or indirectly), as those file descriptors " "will be used for the debconf passthrough protocol." msgstr "" "B installerer pakker der bruger debconf for at vise en " "statusbjælke. Den angivne I skal være en kommandolinje apt-" "brugerflade; specifikt, skal den sende statusinformation til filbeskrivelsen " "valgt af konfigurationstilvalget C, og skal bevare " "filbeskrivelserne nomineret af konfigurationstilvalget C " "åbne, når debconf startes op (direkte eller indirekte), da disse " "filbeskrivelser vil blive brugt af deboncfs gennemløbsprotokol." #. type: textblock #: ../../debconf-apt-progress:25 msgid "" "The arguments to the command you supply should generally include B<-y> (for " "B or B) or similar to avoid the apt frontend prompting " "for input. B cannot do this itself because the " "appropriate argument may differ between apt frontends." msgstr "" "Argumenterne for kommandoen du angiver skal generelt inkludere B<-y> (for " "B eller B) eller lignende for at undgå at apt-" "brugerfladen spørger efter inddata. B kan ikke udføre " "dette selv, da det passende argument kan være forskelligt mellem apt-" "brugerflader." #. type: textblock #: ../../debconf-apt-progress:30 msgid "" "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to " "create a progress bar with multiple segments for different stages of " "installation, provided that the caller is a debconf confmodule. The caller " "may also interact with the progress bar itself using the debconf protocol if " "it so desires." msgstr "" "Tilvalgene B<--start>, B<--stop>, B<--from> og B<--to> kan bruges til at " "oprette en statusbjælke med flere segmenter for forskellige " "installationsstadier, så længe at kalderen er et konfigurationsmodul for " "debconf. Kalderen kan også interagere med selve statusbjælken via " "protokollen for debconf såfremt dette ønskes." #. type: textblock #: ../../debconf-apt-progress:36 msgid "" "debconf locks its config database when it starts up, which makes it " "unfortunately inconvenient to have one instance of debconf displaying the " "progress bar and another passing through questions from packages being " "installed. If you're using a multiple-segment progress bar, you'll need to " "eval the output of the B<--config> option before starting the debconf " "frontend to work around this. See L below." msgstr "" "debconf låser sin konfigurationsdatabase når den starter op, hvilket " "desværre gør det upassende at have en instans af debconf vise statusbjælken " "og en anden sende spørgsmål igennem fra pakker der bliver installeret. Hvis " "du bruger en flersegments statusbjælke, så skal du evaluere uddata for " "tilvalget B<--config> før du starter brugerfladen for debconf til at omgå " "dette. Se L nedenfor." #. type: =item #: ../../debconf-apt-progress:47 msgid "B<--config>" msgstr "B<--config>" #. type: textblock #: ../../debconf-apt-progress:49 msgid "" "Print environment variables necessary to start up a progress bar frontend." msgstr "" "Vis miljøvariabler nødvendige for at opstarte en brugerflade for " "statusbjælke." #. type: =item #: ../../debconf-apt-progress:51 msgid "B<--start>" msgstr "B<--start>" #. type: textblock #: ../../debconf-apt-progress:53 msgid "" "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and " "B<--to> to use other endpoints." msgstr "" "Opstart en statusbjælke, løbende fra 0 til 100 som standard. Brug B<--from> " "og B<--to> for andre slutpunkter." #. type: =item #: ../../debconf-apt-progress:56 msgid "B<--from> I" msgstr "B<--from> I" #. type: textblock #: ../../debconf-apt-progress:58 msgid "" "If used with B<--start>, make the progress bar begin at I rather " "than 0." msgstr "" "Hvis brugt med B<--start>, så lad statusbjælken begynde ved I fremfor " "0." #. type: textblock #: ../../debconf-apt-progress:61 msgid "" "Otherwise, install packages with their progress bar beginning at this " "\"waypoint\". Must be used with B<--to>." msgstr "" "Ellers så installaer pakker med deres statusbjælke begyndende ved dette " "»punkt«. Skal bruges med B<--to>." #. type: =item #: ../../debconf-apt-progress:64 msgid "B<--to> I" msgstr "B<--to> I" #. type: textblock #: ../../debconf-apt-progress:66 msgid "" "If used with B<--start>, make the progress bar end at I rather " "than 100." msgstr "" #. type: textblock #: ../../debconf-apt-progress:69 msgid "" "Otherwise, install packages with their progress bar ending at this " "\"waypoint\". Must be used with B<--from>." msgstr "" #. type: =item #: ../../debconf-apt-progress:72 msgid "B<--stop>" msgstr "B<--stop>" #. type: textblock #: ../../debconf-apt-progress:74 msgid "Stop a running progress bar." msgstr "Stop en kørende statusbjælke." #. type: =item #: ../../debconf-apt-progress:76 msgid "B<--no-progress>" msgstr "B<--no-progress>" #. type: textblock #: ../../debconf-apt-progress:78 msgid "" "Avoid starting, stopping, or stepping the progress bar. Progress messages " "from apt, media change events, and debconf questions will still be passed " "through to debconf." msgstr "" #. type: =item #: ../../debconf-apt-progress:82 msgid "B<--dlwaypoint> I" msgstr "" #. type: textblock #: ../../debconf-apt-progress:84 msgid "" "Specify what percent of the progress bar to use for downloading packages. " "The remainder will be used for installing packages. The default is to use " "15% for downloading and the remaining 85% for installing." msgstr "" #. type: =item #: ../../debconf-apt-progress:88 msgid "B<--logfile> I" msgstr "B<--logfile> I" #. type: textblock #: ../../debconf-apt-progress:90 msgid "Send the normal output from apt to the given file." msgstr "Send de normale uddata fra apt til den givne fil." #. type: =item #: ../../debconf-apt-progress:92 msgid "B<--logstderr>" msgstr "B<--logstderr>" #. type: textblock #: ../../debconf-apt-progress:94 msgid "" "Send the normal output from apt to stderr. If you supply neither B<--" "logfile> nor B<--logstderr>, the normal output from apt will be discarded." msgstr "" #. type: =item #: ../../debconf-apt-progress:98 msgid "B<-->" msgstr "B<-->" #. type: textblock #: ../../debconf-apt-progress:100 msgid "" "Terminate options. Since you will normally need to give at least the B<-y> " "argument to the command being run, you will usually need to use B<--> to " "prevent that being interpreted as an option to B " "itself." msgstr "" #. type: textblock #: ../../debconf-apt-progress:109 msgid "" "Install the GNOME desktop and an X window system development environment " "within a progress bar:" msgstr "" "Installer GNOME-skrivebordet og et udviklingsmiljø for X-vinduessystemet i " "en statusbjælke:" #. type: verbatim #: ../../debconf-apt-progress:112 #, no-wrap msgid "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" msgstr "" " debconf-apt-progress -- aptitude -y installer gnome x-window-system-dev\n" "\n" #. type: textblock #: ../../debconf-apt-progress:114 msgid "" "Install the GNOME, KDE, and XFCE desktops within a single progress bar, " "allocating 45% of the progress bar for each of GNOME and KDE and the " "remaining 10% for XFCE:" msgstr "" #. type: verbatim #: ../../debconf-apt-progress:118 #, no-wrap msgid "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" msgstr "" #. type: =head1 #: ../../debconf-apt-progress:135 msgid "RETURN CODE" msgstr "RETURKODE" #. type: textblock #: ../../debconf-apt-progress:137 msgid "" "The exit code of the specified command is returned, unless the user hit the " "cancel button on the progress bar. If the cancel button was hit, a value of " "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 " "will be returned." msgstr "" #. type: =head1 #: ../../debconf-apt-progress:654 msgid "AUTHORS" msgstr "FORFATTERE" #. type: textblock #: ../../debconf-apt-progress:656 ../../debconf-escape:74 msgid "Colin Watson " msgstr "Colin Watson " #. type: textblock #: ../../debconf-escape:5 msgid "debconf-escape - helper when working with debconf's escape capability" msgstr "" #. type: verbatim #: ../../debconf-escape:9 #, no-wrap msgid "" " debconf-escape -e < unescaped-text\n" " debconf-escape -u < escaped-text\n" "\n" msgstr "" #. type: textblock #: ../../debconf-escape:14 msgid "" "When debconf has the 'escape' capability set, it will expect commands you " "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> " "respectively) and will in turn escape backslashes and newlines in its " "replies. This can be used, for example, to substitute multi-line strings " "into templates, or to get multi-line extended descriptions reliably using " "C." msgstr "" #. type: textblock #: ../../debconf-escape:23 msgid "L (available in the debconf-doc package)" msgstr "L (tilgængelig i pakken debconf-doc)" #. type: textblock #: ../../debconf-communicate:5 msgid "debconf-communicate - communicate with debconf" msgstr "debconf-communicate - kommuniker med debconf" #. type: verbatim #: ../../debconf-communicate:11 #, no-wrap msgid "" " echo commands | debconf-communicate [options] [package]\n" "\n" msgstr "" #. type: textblock #: ../../debconf-communicate:15 msgid "" "B allows you to communicate with debconf on the fly, " "from the command line. The package argument is the name of the package which " "you are pretending to be as you communicate with debconf, and it may be " "omitted if you are lazy. It reads commands in the form used by the debconf " "protocol from stdin. For documentation on the available commands and their " "usage, see the debconf specification." msgstr "" #. type: textblock #: ../../debconf-communicate:22 msgid "" "The commands are executed in sequence. The textual return code of each is " "printed out to standard output." msgstr "" "Kommandoerne udføres i sekvens. Den tekstmæssige returkode for hver vises i " "standardud." #. type: textblock #: ../../debconf-communicate:25 msgid "" "The return value of this program is the numeric return code of the last " "executed command." msgstr "" "Returværdien for dette program er den numeriske returkode for den sidst " "udførte kommando." #. type: SH #: ../../debconf-communicate:28 debconf.conf.5:444 #, no-wrap msgid "EXAMPLE" msgstr "EKSEMPEL" #. type: verbatim #: ../../debconf-communicate:30 #, no-wrap msgid "" " echo get debconf/frontend | debconf-communicate\n" "\n" msgstr "" #. type: textblock #: ../../debconf-communicate:32 msgid "Print out the value of the debconf/frontend question." msgstr "Vis værdien for debconf/brugerflade spørgsmålet." #. type: =head1 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25 #: ../../debconf-set-selections:20 msgid "WARNING" msgstr "ADVARSEL" #. type: textblock #: ../../debconf-communicate:36 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging." msgstr "" #. type: textblock #: ../../debconf-communicate:41 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-copydb:5 msgid "debconf-copydb - copy a debconf database" msgstr "debconf-copydb - kopier en debconfdatabase" #. type: verbatim #: ../../debconf-copydb:19 #, no-wrap msgid "" " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n" "\n" msgstr "" #. type: textblock #: ../../debconf-copydb:32 msgid "" "B copies items from an existing debconf database into " "another, possibly new database. The two databases may have different " "formats; if so a conversion will automatically be done." msgstr "" #. type: =item #: ../../debconf-copydb:40 msgid "I" msgstr "" #. type: textblock #: ../../debconf-copydb:42 msgid "" "The name of the source database. Typically it will be defined in your " "debconf.conf (or .debconfrc) file." msgstr "" "Navn på kildedatabasen. Typisk vil den være defineret i filen debconf.conf " "(eller .debconfrc)." #. type: =item #: ../../debconf-copydb:45 msgid "I" msgstr "" #. type: textblock #: ../../debconf-copydb:47 msgid "" "The name of the destination database. It may be defined in debconf.conf or ." "debconfrc, or you might define it on the command line (see below)." msgstr "" #. type: =item #: ../../debconf-copydb:51 msgid "B<-p> I, B<--pattern> I" msgstr "B<-p> I, B<--pattern> I" #. type: textblock #: ../../debconf-copydb:53 msgid "" "If this is specified, only items in I whose names match the " "pattern will be copied." msgstr "" #. type: =item #: ../../debconf-copydb:56 msgid "B<--owner-pattern> I" msgstr "" #. type: textblock #: ../../debconf-copydb:58 msgid "" "If this is specified, only items in I whose owners match the " "pattern will be copied." msgstr "" #. type: =item #: ../../debconf-copydb:61 msgid "B<-c> I, B<--config> I" msgstr "" #. type: textblock #: ../../debconf-copydb:63 msgid "Set option Foo to bar. This is similar to writing:" msgstr "" #. type: verbatim #: ../../debconf-copydb:65 #, no-wrap msgid "" " Foo: bar\n" "\n" msgstr "" #. type: textblock #: ../../debconf-copydb:67 msgid "" "In debconf.conf, except you probably want to leave off the space on the " "command line (or quote it: \"Foo: bar\"). Generally must be used multiple " "times, to build up a full configuration stanza. While blank lines are used " "to separate stanzas in debconf.conf, this program will assume that \"Name:" "dbname\" denotes the beginning of a new stanza." msgstr "" #. type: verbatim #: ../../debconf-copydb:77 #, no-wrap msgid "" " debconf-copydb configdb backup\n" "\n" msgstr "" #. type: textblock #: ../../debconf-copydb:79 msgid "" "Copy all of configdb to backup, assuming you already have the backup " "database defined in debconf.conf." msgstr "" #. type: verbatim #: ../../debconf-copydb:82 #, no-wrap msgid "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" msgstr "" #. type: textblock #: ../../debconf-copydb:86 msgid "" "Copy slrn's data out of configdb, and into newdb. newdb is not defined in " "the rc file, so the --config switches set up the database on the fly." msgstr "" #. type: verbatim #: ../../debconf-copydb:89 #, no-wrap msgid "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" msgstr "" #. type: textblock #: ../../debconf-copydb:92 msgid "Spit out all the items in the debconf database related to package foo." msgstr "" #. type: verbatim #: ../../debconf-copydb:94 #, no-wrap msgid "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" msgstr "" #. type: textblock #: ../../debconf-copydb:99 msgid "" "This uses the special purpose pipe driver to copy a database to a remote " "system." msgstr "" #. type: textblock #: ../../debconf-copydb:104 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-getlang:5 msgid "debconf-getlang - extract a language from a templates file" msgstr "debconf-getlang - udtræk et sprog fra en skabelonfil" #. type: verbatim #: ../../debconf-getlang:18 #, no-wrap msgid "" " debconf-getlang lang master [translation]\n" " debconf-getlang --stats master translation [...]\n" "\n" msgstr "" #. type: textblock #: ../../debconf-getlang:23 msgid "" "Note: This utility is deprecated; you should switch to using the po-debconf " "package." msgstr "" "Bemærk: Dette redskab er forældet; du bør skifte til pakken po-debconf." #. type: textblock #: ../../debconf-getlang:25 msgid "" "This program helps make and manage translations of debconf templates. There " "are basically three situations in which this program might be called:" msgstr "" "Dette program hjælper med at lave og håndtere oversættelse af " "debconfskabeloner. Der er grundlæggende tre situationer hvor dette " "programmer kan kaldes:" #. type: =item #: ../../debconf-getlang:30 msgid "A translation is just being started." msgstr "En oversættelse er netop igangsat." #. type: textblock #: ../../debconf-getlang:32 msgid "" "You want to provide the translator with a file they can work on that has the " "English fields from your templates file, plus blank Field-ll fields for the " "target language that they can fill in." msgstr "" #. type: textblock #: ../../debconf-getlang:36 msgid "" "To do this, run the program with first parameter being the code for the " "language that is being translated to, and the second parameter being the " "filename of the English templates file." msgstr "" #. type: =item #: ../../debconf-getlang:40 msgid "A translation is well under way." msgstr "En oversættelse er undervejs." #. type: textblock #: ../../debconf-getlang:42 msgid "" "You have changed some English text, or added more items to your templates " "file, and you want to send the translators a file with the English text plus " "their current translations (or you are the translator, and you want to " "generate such a file for your own use)." msgstr "" #. type: textblock #: ../../debconf-getlang:47 msgid "" "To accomplish this, run the program with the first parameter being the the " "code for the language that is being translated to, the second parameter " "being the filename of the master English templates file, and the third " "parameter being the filename of the current translated file." msgstr "" #. type: textblock #: ../../debconf-getlang:52 msgid "" "When run this way, the program is smart enough to notice fuzzy translations. " "For example a fuzzy Description will be output as Description--fuzzy, " "and a new, blank Description- will be added. Translators should " "remove the -fuzzy fields as they correct the fuzzy translations." msgstr "" #. type: =item #: ../../debconf-getlang:58 msgid "Checking the status of a translation" msgstr "Kontroller status for en oversættelse" #. type: textblock #: ../../debconf-getlang:60 msgid "" "To check the status of a translation, use the --status flag, and pass the " "english template file as the first parameter, and all the other translated " "templates after that. It will output statistics for each of them. For " "example:" msgstr "" #. type: verbatim #: ../../debconf-getlang:65 #, no-wrap msgid "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" msgstr "" #. type: =head1 #: ../../debconf-getlang:69 msgid "NOTE" msgstr "BEMÆRK" #. type: textblock #: ../../debconf-getlang:71 msgid "" "Note that the text in the generated templates may be word-wrapped by debconf." msgstr "Bemærk at teksten i de oprettede skabelon kan være orddelt af debconf." #. type: textblock #: ../../debconf-getlang:76 msgid "L" msgstr "" #. type: textblock #: ../../debconf-get-selections:5 msgid "debconf-get-selections - output contents of debconf database" msgstr "debconf-get-selections - vis indholdet af debconfdatabasen" #. type: textblock #: ../../debconf-get-selections:9 msgid "debconf-get-selections [--installer]" msgstr "debconf-get-selections [--installer]" #. type: textblock #: ../../debconf-get-selections:13 msgid "" "Output the current debconf database in a format understandable by debconf-" "set-selections." msgstr "" "Vis den aktuelle debconfdatabase i et format som kan forstås af debconf-set-" "selections." #. type: textblock #: ../../debconf-get-selections:16 msgid "" "To dump the debconf database of the debian-installer, from /var/log/" "installer/cdebconf, use the --installer parameter." msgstr "" "For at dumpe debconfdatabasen for debian-installer, fra /var/log/installer/" "cdebconf, så brug parameteren --installer." #. type: textblock #: ../../debconf-get-selections:80 ../../debconf-set-selections:228 msgid "Petter Reinholdtsen " msgstr "Petter Reinholdtsen " #. type: textblock #: ../../debconf-loadtemplate:5 msgid "debconf-loadtemplate - load template file into debconf database" msgstr "debconf-loadtemplate - indlæs skabelonfil i debconfdatabasen" #. type: verbatim #: ../../debconf-loadtemplate:16 #, no-wrap msgid "" " debconf-loadtemplate owner file [file ..]\n" "\n" msgstr "" #. type: textblock #: ../../debconf-loadtemplate:20 msgid "" "Loads one or more template files into the debconf database. The first " "parameter specifies the owner of the templates (typically, the owner is the " "name of a debian package). The remaining parameters are template files to " "load." msgstr "" #. type: textblock #: ../../debconf-loadtemplate:27 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging, or to seed the debconf " "database." msgstr "" #. type: textblock #: ../../debconf-loadtemplate:33 msgid "L" msgstr "" #. type: textblock #: ../../debconf-mergetemplate:5 msgid "debconf-mergetemplate - merge together multiple debconf template files" msgstr "" #. type: verbatim #: ../../debconf-mergetemplate:19 #, no-wrap msgid "" " debconf-mergetemplate [options] [templates.ll ...] templates\n" "\n" msgstr "" #. type: textblock #: ../../debconf-mergetemplate:23 msgid "" "Note: This utility is deprecated. You should switch to using po-debconf's " "po2debconf program." msgstr "" #. type: textblock #: ../../debconf-mergetemplate:26 msgid "" "This program is useful if you have multiple debconf templates files which " "you want to merge together into one big file. All the specified files will " "be read in, merged, and output to standard output." msgstr "" #. type: textblock #: ../../debconf-mergetemplate:30 msgid "" "This can be especially useful if you are dealing with translated template " "files. In this case, you might have your main template file, plus several " "other files provided by the translators. These files will have translated " "fields in them, and maybe the translators left in the english versions of " "the fields they translated, for their reference." msgstr "" #. type: textblock #: ../../debconf-mergetemplate:36 msgid "" "So, you want to merge together all the translated templates files with your " "main templates file. Any fields that are unique to the translated files need " "to be added in to the correct templates, but any fields they have in common " "should be superseded by the fields in the main file (which might be more up-" "to-date)." msgstr "" #. type: textblock #: ../../debconf-mergetemplate:42 msgid "" "This program handles that case properly, just list each of the translated " "templates files, and then your main templates file last." msgstr "" #. type: =item #: ../../debconf-mergetemplate:49 msgid "--outdated" msgstr "" #. type: textblock #: ../../debconf-mergetemplate:51 msgid "" "Merge in even outdated translations. The default is to drop them with a " "warning message." msgstr "" #. type: =item #: ../../debconf-mergetemplate:54 msgid "--drop-old-templates" msgstr "" #. type: textblock #: ../../debconf-mergetemplate:56 msgid "" "If a translation has an entire template that is not in the master file (and " "thus is probably an old template), drop that entire template." msgstr "" #. type: textblock #: ../../debconf-mergetemplate:63 msgid "L" msgstr "" #. type: textblock #: ../../debconf-set-selections:5 #, fuzzy #| msgid "debconf-get-selections - output contents of debconf database" msgid "debconf-set-selections - insert new values into the debconf database" msgstr "debconf-get-selections - vis indholdet af debconfdatabasen" #. type: verbatim #: ../../debconf-set-selections:9 #, no-wrap msgid "" " debconf-set-selections file\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" msgstr "" #. type: textblock #: ../../debconf-set-selections:14 msgid "" "B can be used to pre-seed the debconf database with " "answers, or to change answers in the database. Each question will be marked " "as seen to prevent debconf from asking the question interactively." msgstr "" #. type: textblock #: ../../debconf-set-selections:18 msgid "Reads from a file if a filename is given, otherwise from stdin." msgstr "" #. type: textblock #: ../../debconf-set-selections:22 msgid "" "Only use this command to seed debconf values for packages that will be or " "are installed. Otherwise you can end up with values in the database for " "uninstalled packages that will not go away, or with worse problems involving " "shared values. It is recommended that this only be used to seed the database " "if the originating machine has an identical install." msgstr "" #. type: =head1 #: ../../debconf-set-selections:28 msgid "DATA FORMAT" msgstr "" #. type: textblock #: ../../debconf-set-selections:30 msgid "" "The data is a series of lines. Lines beginning with a # character are " "comments. Blank lines are ignored. All other lines set the value of one " "question, and should contain four values, each separated by one character of " "whitespace. The first value is the name of the package that owns the " "question. The second is the name of the question, the third value is the " "type of this question, and the fourth value (through the end of the line) " "is the value to use for the answer of the question." msgstr "" #. type: textblock #: ../../debconf-set-selections:38 msgid "" "Alternatively, the third value can be \"seen\"; then the preseed line only " "controls whether the question is marked as seen in debconf's database. Note " "that preseeding a question's value defaults to marking that question as " "seen, so to override the default value without marking a question seen, you " "need two lines." msgstr "" #. type: textblock #: ../../debconf-set-selections:44 msgid "" "Lines can be continued to the next line by ending them with a \"\\\" " "character." msgstr "" #. type: verbatim #: ../../debconf-set-selections:49 #, no-wrap msgid "" " # Force debconf priority to critical.\n" " debconf debconf/priority select critical\n" "\n" msgstr "" #. type: verbatim #: ../../debconf-set-selections:52 #, no-wrap msgid "" " # Override default frontend to readline, but allow user to select.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" msgstr "" #. type: =item #: ../../debconf-set-selections:60 msgid "B<--verbose>, B<-v>" msgstr "" #. type: textblock #: ../../debconf-set-selections:62 msgid "verbose output" msgstr "" #. type: =item #: ../../debconf-set-selections:64 msgid "B<--checkonly>, B<-c>" msgstr "" #. type: textblock #: ../../debconf-set-selections:66 msgid "only check the input file format, do not save changes to database" msgstr "" #. type: textblock #: ../../debconf-set-selections:72 msgid "L (available in the debconf-utils package)" msgstr "" #. type: textblock #: ../../debconf-show:5 msgid "debconf-show - query the debconf database" msgstr "" #. type: verbatim #: ../../debconf-show:9 #, no-wrap msgid "" " debconf-show packagename [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" msgstr "" #. type: textblock #: ../../debconf-show:15 msgid "B lets you query the debconf database in different ways." msgstr "" #. type: textblock #: ../../debconf-show:17 msgid "" "The most common use is \"debconf-show packagename\", which displays all " "items in the debconf database owned by a given package, and their current " "values. Questions that have been asked already are prefixed with an '*'." msgstr "" #. type: textblock #: ../../debconf-show:21 msgid "" "This can be useful as a debugging aid, and especially handy in bug reports " "involving a package's use of debconf." msgstr "" #. type: =item #: ../../debconf-show:28 msgid "B<--db=>I" msgstr "" #. type: textblock #: ../../debconf-show:30 msgid "" "Specify the database to query. By default, debconf-show queries the main " "database." msgstr "" #. type: =item #: ../../debconf-show:33 msgid "B<--listowners>" msgstr "" #. type: textblock #: ../../debconf-show:35 msgid "" "Lists all owners of questions in the database. Generally an owner is " "equivalent to a debian package name." msgstr "" #. type: =item #: ../../debconf-show:38 msgid "B<--listdbs>" msgstr "" #. type: textblock #: ../../debconf-show:40 msgid "Lists all available databases." msgstr "" #. type: textblock #: ../../debconf-show:154 msgid "Joey Hess and Sylvain Ferriol" msgstr "Joey Hess and Sylvain Ferriol" #. type: textblock #: ../../dpkg-preconfigure:5 msgid "" "dpkg-preconfigure - let packages ask questions prior to their installation" msgstr "dpkg-preconfigure - lad pakker stille spørgsmål før deres installation" #. type: verbatim #: ../../dpkg-preconfigure:9 #, no-wrap msgid "" " dpkg-preconfigure [options] package.deb\n" "\n" msgstr "" " dpkg-preconfigure [tilvalg] pakke.deb\n" "\n" #. type: verbatim #: ../../dpkg-preconfigure:11 #, no-wrap msgid "" " dpkg-preconfigure --apt\n" "\n" msgstr "" " dpkg-preconfigure --apt\n" "\n" #. type: textblock #: ../../dpkg-preconfigure:15 msgid "" "B lets packages ask questions before they are installed. " "It operates on a set of debian packages, and all packages that use debconf " "will have their config script run so they can examine the system and ask " "questions." msgstr "" "B lader pakker stille spørgsmål før de installeres. Den " "fungerer på et sæt af debianpakker, og alle pakker som bruger debconf vil " "have deres konfigurationsskript kørt, så at de kan undersøge systemet og " "stille spørgsmål." #. type: textblock #: ../../dpkg-preconfigure:30 msgid "" "Set the lowest priority of questions you are interested in. Any questions " "with a priority below the selected priority will be ignored and their " "default answers will be used." msgstr "" #. type: =item #: ../../dpkg-preconfigure:38 msgid "B<--apt>" msgstr "" #. type: textblock #: ../../dpkg-preconfigure:40 msgid "" "Run in apt mode. It will expect to read a set of package filenames from " "stdin, rather than getting them as parameters. Typically this is used to " "make apt run dpkg-preconfigure on all packages before they are installed. " "To do this, add something like this to /etc/apt/apt.conf:" msgstr "" #. type: verbatim #: ../../dpkg-preconfigure:45 #, no-wrap msgid "" " // Pre-configure all packages before\n" " // they are installed.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" msgstr "" #. type: =item #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69 msgid "B<-h>, B<--help>" msgstr "B<-h>, B<--help>" #. type: textblock #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71 msgid "Display usage help." msgstr "Vis hjælpetekst." #. type: textblock #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79 msgid "L" msgstr "L" #. type: textblock #: ../../dpkg-reconfigure:5 msgid "dpkg-reconfigure - reconfigure an already installed package" msgstr "dpkg-reconfigure - rekonfigurer en allerede installeret pakke" #. type: verbatim #: ../../dpkg-reconfigure:9 #, no-wrap msgid "" " dpkg-reconfigure [options] packages\n" "\n" msgstr "" " dpkg-reconfigure [tilvalg] pakker\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:13 msgid "" "B reconfigures packages after they have already been " "installed. Pass it the names of a package or packages to reconfigure. It " "will ask configuration questions, much like when the package was first " "installed." msgstr "" #. type: textblock #: ../../dpkg-reconfigure:18 msgid "" "If you just want to see the current configuration of a package, see " "L instead." msgstr "" #. type: textblock #: ../../dpkg-reconfigure:27 msgid "" "Select the frontend to use. The default frontend can be permanently changed " "by:" msgstr "" #. type: verbatim #: ../../dpkg-reconfigure:30 #, no-wrap msgid "" " dpkg-reconfigure debconf\n" "\n" msgstr "" #. type: textblock #: ../../dpkg-reconfigure:32 msgid "" "Note that if you normally have debconf set to use the noninteractive " "frontend, dpkg-reconfigure will use the dialog frontend instead, so you " "actually get to reconfigure the package." msgstr "" #. type: textblock #: ../../dpkg-reconfigure:38 msgid "" "Specify the minimum priority of question that will be displayed. dpkg-" "reconfigure normally shows low priority questions no matter what your " "default priority is. See L for a list." msgstr "" #. type: =item #: ../../dpkg-reconfigure:46 msgid "B<--default-priority>" msgstr "" #. type: textblock #: ../../dpkg-reconfigure:48 msgid "" "Use whatever the default priority of question is, instead of forcing the " "priority to low." msgstr "" #. type: =item #: ../../dpkg-reconfigure:51 msgid "B<-u>, B<--unseen-only>" msgstr "" #. type: textblock #: ../../dpkg-reconfigure:53 msgid "" "By default, all questions are shown, even if they have already been " "answered. If this parameter is set though, only questions that have not yet " "been seen will be asked." msgstr "" #. type: =item #: ../../dpkg-reconfigure:57 msgid "B<--force>" msgstr "" #. type: textblock #: ../../dpkg-reconfigure:59 msgid "" "Force dpkg-reconfigure to reconfigure a package even if the package is in an " "inconsistent or broken state. Use with caution." msgstr "" #. type: =item #: ../../dpkg-reconfigure:62 msgid "B<--no-reload>" msgstr "" #. type: textblock #: ../../dpkg-reconfigure:64 msgid "" "Prevent dpkg-reconfigure from reloading templates. Use with caution; this " "will prevent dpkg-reconfigure from repairing broken templates databases. " "However, it may be useful in constrained environments where rewriting the " "templates database is expensive." msgstr "" #. type: TH #: debconf.conf.5:1 #, no-wrap msgid "DEBCONF.CONF" msgstr "" #. type: Plain text #: debconf.conf.5:4 msgid "debconf.conf - debconf configuration file" msgstr "" #. type: Plain text #: debconf.conf.5:12 msgid "" "Debconf is a configuration system for Debian packages. /etc/debconf.conf and " "~/.debconfrc are configuration files debconf uses to determine which " "databases it should use. These databases are used for storing two types of " "information; dynamic config data the user enters into it, and static " "template data. Debconf offers a flexible, extensible database backend. New " "drivers can be created with a minimum of effort, and sets of drivers can be " "combined in various ways." msgstr "" #. type: Plain text #: debconf.conf.5:17 #, no-wrap msgid "" " # This is a sample config file that is\n" " # sufficient to use debconf.\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" #. type: Plain text #: debconf.conf.5:21 #, no-wrap msgid "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" #. type: Plain text #: debconf.conf.5:26 #, no-wrap msgid "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" msgstr "" #. type: SH #: debconf.conf.5:26 #, no-wrap msgid "FILE FORMAT" msgstr "" #. type: Plain text #: debconf.conf.5:30 msgid "" "The format of this file is a series of stanzas, each separated by at least " "one wholly blank line. Comment lines beginning with a \"#\" character are " "ignored." msgstr "" #. type: Plain text #: debconf.conf.5:33 msgid "" "The first stanza of the file is special, is used to configure debconf as a " "whole. Two fields are required to be in this first stanza:" msgstr "" #. type: TP #: debconf.conf.5:34 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:37 msgid "Specifies the name of the database from which to load config data." msgstr "" #. type: TP #: debconf.conf.5:37 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:40 msgid "Specifies the name of the database to use for the template cache." msgstr "" #. type: Plain text #: debconf.conf.5:43 msgid "Additional fields that can be used include:" msgstr "" #. type: TP #: debconf.conf.5:44 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:48 msgid "" "The frontend Debconf should use, overriding any frontend set in the debconf " "database." msgstr "" #. type: TP #: debconf.conf.5:48 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:52 msgid "" "The priority Debconf should use, overriding any priority set in the debconf " "database." msgstr "" #. type: TP #: debconf.conf.5:52 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:59 msgid "" "The email address Debconf should send mail to if it needs to make sure that " "the admin has seen an important message. Defaults to \"root\", but can be " "set to any valid email address to send the mail there. If you prefer to " "never have debconf send you mail, specify a blank address. This can be " "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable." msgstr "" #. type: Plain text #: debconf.conf.5:59 debconf.conf.5:395 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:67 msgid "" "If set, this will cause debconf to output debugging information to standard " "error. The value it is set to can be something like \"user\", \"developer\", " "\"db\", or a regular expression. Typically, rather than setting it " "permanently in a config file, you will only want to temporarily turn on " "debugging, and the DEBCONF_DEBUG environment variable can be set instead to " "accomplish that." msgstr "" #. type: TP #: debconf.conf.5:67 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:72 msgid "" "If set, this will make debconf not display warnings about various things. " "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment " "variable." msgstr "" #. type: TP #: debconf.conf.5:72 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:77 msgid "" "Makes debconf log debugging information as it runs, to the syslog. The value " "it is set to controls that is logged. See Debug, above for an explanation of " "the values that can be set to control what is logged." msgstr "" #. type: TP #: debconf.conf.5:77 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:82 msgid "" "If set to \"true\", makes some debconf frontends use a special terse display " "mode that outputs as little as possible. Defaults to false. Terse mode may " "be temporarily set via the DEBCONF_TERSE environment variable." msgstr "" #. type: Plain text #: debconf.conf.5:87 #, no-wrap msgid "" "For example, the first stanza of a file might look like this:\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" #. type: Plain text #: debconf.conf.5:91 #, no-wrap msgid "" "Each remaining stanza in the file sets up a database. A database stanza\n" "begins by naming the database:\n" " Name: configdb\n" msgstr "" #. type: Plain text #: debconf.conf.5:95 #, no-wrap msgid "" "Then it indicates what database driver should be used for this database.\n" "See DRIVERS, below, for information about what drivers are available.\n" " Driver: File\n" msgstr "" #. type: Plain text #: debconf.conf.5:100 #, no-wrap msgid "" "You can indicate that the database is not essential to the proper\n" "functioning of debconf by saying it is not required. This will make debconf\n" "muddle on if the database fails for some reason.\n" " Required: false\n" msgstr "" #. type: Plain text #: debconf.conf.5:104 #, no-wrap msgid "" "You can mark any database as readonly and debconf will not write anything\n" "to it.\n" " Readonly: true\n" msgstr "" "Du kan markere databaser som skrivebeskyttet og debconf vil så ikke skrive\n" "noget til databasen.\n" " Skrivebeskyttet: true (sand)\n" #. type: Plain text #: debconf.conf.5:107 msgid "" "You can also limit what types of data can go into the database with Accept- " "and Reject- lines; see ACCESS CONTROLS, below." msgstr "" "Du kan også begrænse hvilken slags data som kan tilføres databasen med " "linjerne Accept- og Reject-; se ACCESS CONTROLS nedenfor." #. type: Plain text #: debconf.conf.5:112 #, no-wrap msgid "" "The remainder of each database stanza is used to provide configuration\n" "specific to that driver. For example, the Text driver needs to know\n" "a directory to put the database in, so you might say:\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" #. type: SH #: debconf.conf.5:112 #, no-wrap msgid "DRIVERS" msgstr "DRIVERE" #. type: Plain text #: debconf.conf.5:119 msgid "" "A number of drivers are available, and more can be written with little " "difficulty. Drivers come in two general types. First there are real drivers " "-- drivers that actually access and store data in some kind of database, " "which might be on the local filesystem, or on a remote system. Then there " "are meta-drivers that combine other drivers together to form more " "interesting systems. Let's start with the former." msgstr "" " Et antal drivere er tilgængelige, og flere kan skrives uden de store " "problemer. Drivere laves i to generelle typer. Først er der reelle drivere - " "drivere som reelt tilgår og gemmer data i en slags database, som kan være på " "det lokale filsystem eller på et eksternt system. Derudover er der " "metadreivere som kombinerer andre drivere så de udgør mere interessante " "systemer. Lad os starte med den første." #. type: TP #: debconf.conf.5:120 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:127 msgid "" "This database driver allows debconf to store a whole database in a single " "flat text file. This makes it easy to archive, transfer between machines, " "and edit. It is one of the more compact database formats in terms of disk " "space used. It is also one of the slowest." msgstr "" "Denne databasedriver tillader debconf at gemme en hel database i en enkel " "flad tekstfil. Dette gør det nemt at arkivere, overføre mellem maskiner, og " "redigere. Det er en af de mere kompakte databaseformater i form af brugt " "diskplads. Det er også en af de langsomste." #. type: Plain text #: debconf.conf.5:130 msgid "" "On the downside, the entire file has to be read in each time debconf starts " "up, and saving it is also slow." msgstr "" "Hele filen skal læses ind hver gang debconf starter op og det at gemme den " "tager også lang tid." #. type: Plain text #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309 msgid "The following things are configurable for this driver." msgstr "De følgende områder kan konfigureres for denne driver." #. type: TP #: debconf.conf.5:133 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:136 msgid "The file to use as the database. This is a required field." msgstr "Filen at bruge som database. Dette er et obligatorisk felt." #. type: TP #: debconf.conf.5:136 debconf.conf.5:203 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:140 msgid "" "The permissions to create the file with if it does not exist. Defaults to " "600, since the file could contain passwords in some circumstances." msgstr "" "Rettighederne til at oprette filen med hvis den ikke findes. Standarden er " "600, da filen kunen indeholde adgangskoder i nogle tilfælde." #. type: TP #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 msgid "" "The format of the file. See FORMATS below. Defaults to using a rfc-822 like " "format." msgstr "" "Formatet for filen. Se FORMATS nedenfor. Standarden er et rfc-822-lignende " "format." #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:148 debconf.conf.5:184 msgid "" "Whether a backup should be made of the old file before changing it. " "Defaults to true." msgstr "" "Hvorvidt en sikkerhedskopi skal udføres på den gamle fil før den ændres. " "Standarden er true (sand)." #. type: Plain text #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209 msgid "As example stanza setting up a database using this driver:" msgstr "" #. type: Plain text #: debconf.conf.5:155 #, no-wrap msgid "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" msgstr "" " Navn: mydb\n" " Driver: File\n" " Filnavn: /var/cache/debconf/mydb.dat\n" #. type: TP #: debconf.conf.5:156 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:166 msgid "" "This database driver allows debconf to store data in a hierarchical " "directory structure. The names of the various debconf templates and " "questions are used as-is to form directories with files in them. This format " "for the database is the easiest to browse and fiddle with by hand. It has " "very good load and save speeds. It also typically occupies the most space, " "since a lot of small files and subdirectories do take up some additional " "room." msgstr "" #. type: TP #: debconf.conf.5:169 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:172 msgid "The directory to put the files in. Required." msgstr "Mappen at placere filerne i. Obligatorisk." #. type: TP #: debconf.conf.5:172 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:176 msgid "" "An extension to add to the names of files. Must be set to a non-empty " "string; defaults to \".dat\"" msgstr "" #. type: Plain text #: debconf.conf.5:192 #, no-wrap msgid "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" msgstr "" #. type: TP #: debconf.conf.5:193 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:200 msgid "" "This database driver is a compromise between the File and DirTree databases. " "It uses a directory, in which there is (approximately) one file per package " "that uses debconf. This is fairly fast, while using little more room than " "the File database driver." msgstr "" #. type: Plain text #: debconf.conf.5:203 msgid "" "This driver is configurable in the same ways as is the DirTree driver, plus:" msgstr "" #. type: Plain text #: debconf.conf.5:207 msgid "" "The permissions to create files with. Defaults to 600, since the files could " "contain passwords in some circumstances." msgstr "" #. type: Plain text #: debconf.conf.5:213 #, no-wrap msgid "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" msgstr "" #. type: TP #: debconf.conf.5:214 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:218 msgid "" "WARNING: This database driver is currently experimental. Use with caution." msgstr "" #. type: Plain text #: debconf.conf.5:226 msgid "" "This database driver accesses a LDAP directory for debconf configuration " "data. Due to the nature of the beast, LDAP directories should typically be " "accessed in read-only mode. This is because multiple accesses can take " "place, and it's generally better for data consistency if nobody tries to " "modify the data while this is happening. Of course, write access is " "supported for those cases where you do want to update the config data in the " "directory." msgstr "" #. type: Plain text #: debconf.conf.5:229 msgid "" "For information about setting up a LDAP server for debconf, read /usr/share/" "doc/debconf-doc/README.LDAP (from the debconf-doc package)." msgstr "" #. type: Plain text #: debconf.conf.5:232 msgid "" "To use this database driver, you must have the libnet-ldap-perl package " "installed. Debconf suggests that package, but does not depend on it." msgstr "" #. type: Plain text #: debconf.conf.5:236 msgid "" "Please carefully consider the security implications of using a remote " "debconf database. Unless you trust the source, and you trust the intervening " "network, it is not a very safe thing to do." msgstr "" #. type: TP #: debconf.conf.5:239 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:242 msgid "The host name or IP address of an LDAP server to connect to." msgstr "" #. type: TP #: debconf.conf.5:242 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:246 msgid "" "The port on which to connect to the LDAP server. If none is given, the " "default port is used." msgstr "" #. type: TP #: debconf.conf.5:246 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:251 msgid "" "The DN under which all config items will be stored. Each config item will be " "assumed to live in a DN of cn=Eitem nameE,EBase DNE. If this " "structure is not followed, all bets are off." msgstr "" #. type: TP #: debconf.conf.5:251 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:255 msgid "" "The DN to bind to the directory as. Anonymous bind will be used if none is " "specified." msgstr "" #. type: TP #: debconf.conf.5:255 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:259 msgid "" "The password to use in an authenticated bind (used with binddn, above). If " "not specified, anonymous bind will be used." msgstr "" #. type: Plain text #: debconf.conf.5:265 msgid "" "This option should not be used in the general case. Anonymous binding should " "be sufficient most of the time for read-only access. Specifying a bind DN " "and password should be reserved for the occasional case where you wish to " "update the debconf configuration data." msgstr "" #. type: TP #: debconf.conf.5:266 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:272 msgid "" "Enable access to individual LDAP entries, instead of fetching them all at " "once in the beginning. This is very useful if you want to monitor your LDAP " "logs for specific debconf keys requested. In this way, you could also write " "custom handling code on the LDAP server part." msgstr "" #. type: Plain text #: debconf.conf.5:279 msgid "" "Note that when this option is enabled, the connection to the LDAP server is " "kept active during the whole Debconf run. This is a little different from " "the all-in-one behavior where two brief connections are made to LDAP; in the " "beginning to retrieve all the entries, and in the end to save eventual " "changes." msgstr "" #. type: Plain text #: debconf.conf.5:284 msgid "" "An example stanza setting up a database using this driver, assuming the " "remote database is on example.com and can be accessed anonymously:" msgstr "" #. type: Plain text #: debconf.conf.5:291 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" msgstr "" #. type: Plain text #: debconf.conf.5:294 msgid "" "Another example, this time the LDAP database is on localhost, and can be " "written to:" msgstr "" #. type: Plain text #: debconf.conf.5:301 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" msgstr "" #. type: TP #: debconf.conf.5:302 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:307 msgid "" "This special-purpose database driver reads and writes the database from " "standard input/output. It may be useful for people with special needs." msgstr "" #. type: Plain text #: debconf.conf.5:314 msgid "" "The format to read and write. See FORMATS below. Defaults to using a rfc-822 " "like format." msgstr "" #. type: TP #: debconf.conf.5:314 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:318 msgid "" "File descriptor number to read from. Defaults to reading from stdin. If set " "to \"none\", the database will not read any data on startup." msgstr "" #. type: TP #: debconf.conf.5:318 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:322 msgid "" "File descriptor number to write to. Defaults to writing to stdout. If set to " "\"none\", the database will be thrown away on shutdown." msgstr "" #. type: Plain text #: debconf.conf.5:326 msgid "That's all of the real drivers, now moving on to meta-drivers.." msgstr "" #. type: TP #: debconf.conf.5:326 debconf.conf.5:354 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:335 msgid "" "This driver stacks up a number of other databases (of any type), and allows " "them to be accessed as one. When debconf asks for a value, the first " "database on the stack that contains the value returns it. If debconf writes " "something to the database, the write normally goes to the first driver on " "the stack that has the item debconf is modifying, and if none do, the new " "item is added to the first writable database on the stack." msgstr "" #. type: Plain text #: debconf.conf.5:343 msgid "" "Things become more interesting if one of the databases on the stack is " "readonly. Consider a stack of the databases foo, bar, and baz, where foo and " "baz are both readonly. Debconf wants to change an item, and this item is " "only present in baz, which is readonly. The stack driver is smart enough to " "realize that won't work, and it will copy the item from baz to bar, and the " "write will take place in bar. Now the item in baz is shadowed by the item in " "bar, and it will not longer be visible to debconf." msgstr "" #. type: Plain text #: debconf.conf.5:350 msgid "" "This kind of thing is particularly useful if you want to point many systems " "at a central, readonly database, while still allowing things to be " "overridden on each system. When access controls are added to the picture, " "stacks allow you to do many other interesting things, like redirect all " "passwords to one database while a database underneath it handles everything " "else." msgstr "" #. type: Plain text #: debconf.conf.5:352 msgid "Only one piece of configuration is needed to set up a stack:" msgstr "" #. type: Plain text #: debconf.conf.5:358 msgid "" "This is where you specify a list of other databases, by name, to tell it " "what makes up the stack." msgstr "" #. type: Plain text #: debconf.conf.5:361 debconf.conf.5:387 msgid "For example:" msgstr "" #. type: Plain text #: debconf.conf.5:365 #, no-wrap msgid "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" msgstr "" #. type: Plain text #: debconf.conf.5:368 msgid "" "WARNING: The stack driver is not very well tested yet. Use at your own risk." msgstr "" #. type: Plain text #: debconf.conf.5:374 msgid "" "This driver passes all requests on to another database driver. But it also " "copies all write requests to a backup database driver." msgstr "" #. type: Plain text #: debconf.conf.5:376 debconf.conf.5:400 msgid "You must specify the following fields to set up this driver:" msgstr "" #. type: TP #: debconf.conf.5:378 debconf.conf.5:402 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:381 debconf.conf.5:405 msgid "The database to read from and write to." msgstr "" #. type: TP #: debconf.conf.5:381 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:384 msgid "The name of the database to send copies of writes to." msgstr "" #. type: Plain text #: debconf.conf.5:392 #, no-wrap msgid "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" msgstr "" #. type: Plain text #: debconf.conf.5:398 msgid "" "This driver passes all requests on to another database driver, outputting " "verbose debugging output about the request and the result." msgstr "" #. type: SH #: debconf.conf.5:407 #, no-wrap msgid "ACCESS CONTROLS" msgstr "" #. type: Plain text #: debconf.conf.5:411 msgid "" "When you set up a database, you can also use some fields to specify access " "controls. You can specify that a database only accepts passwords, for " "example, or make a database only accept things with \"foo\" in their name." msgstr "" #. type: TP #: debconf.conf.5:411 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:416 msgid "" "As was mentioned earlier, this access control, if set to \"true\", makes a " "database readonly. Debconf will read values from it, but will never write " "anything to it." msgstr "" #. type: TP #: debconf.conf.5:416 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:422 msgid "" "The text in this field is a perl-compatible regular expression that is " "matched against the names of items as they are requested from the database. " "Only if an items name matches the regular expression, will the database " "allow debconf to access or modify it." msgstr "" #. type: TP #: debconf.conf.5:422 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:426 msgid "" "Like Accept-Name, except any item name matching this regular expression will " "be rejected." msgstr "" #. type: TP #: debconf.conf.5:426 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:431 msgid "" "Another regular expression, this matches against the type of the item that " "is being accessed. Only if the type matches the regex will access be granted." msgstr "" #. type: TP #: debconf.conf.5:431 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.conf.5:435 msgid "" "Like Accept-Type, except any type matching this regular expression will be " "rejected." msgstr "" #. type: SH #: debconf.conf.5:435 #, no-wrap msgid "FORMATS" msgstr "" #. type: Plain text #: debconf.conf.5:439 msgid "" "Some of the database drivers use format modules to control the actual format " "in which the database is stored on disk. These formats are currently " "supported:" msgstr "" #. type: TP #: debconf.conf.5:439 #, no-wrap msgid "B<822>" msgstr "" #. type: Plain text #: debconf.conf.5:444 msgid "" "This is a file format loosely based upon the rfc-822 format for email " "message headers. Similar formats are used throughout Debian; in the dpkg " "status file, and so on." msgstr "" #. type: Plain text #: debconf.conf.5:446 msgid "Here is a more complicated example of a debconf.conf file." msgstr "" #. type: Plain text #: debconf.conf.5:452 #, no-wrap msgid "" " # This stanza is used for general debconf setup.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" msgstr "" #. type: Plain text #: debconf.conf.5:457 #, no-wrap msgid "" " # This is my own local database.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" msgstr "" #. type: Plain text #: debconf.conf.5:469 #, no-wrap msgid "" " # This is another database that I use to hold\n" " # only X server configuration.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # It's sorta hard to work out what questions\n" " # belong to X; it should be using a deeper\n" " # tree structure so I could just match on ^X/\n" " # Oh well.\n" " Accept-Name: xserver|xfree86|xbase\n" msgstr "" #. type: Plain text #: debconf.conf.5:485 #, no-wrap msgid "" " # This is our company's global, read-only\n" " # (for me!) debconf database.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # I don't want any passwords that might be\n" " # floating around in there.\n" " Reject-Type: password\n" " # If this db is not accessible for whatever\n" " # reason, carry on anyway.\n" " Required: false\n" msgstr "" #. type: Plain text #: debconf.conf.5:493 #, no-wrap msgid "" " # I use this database to hold\n" " # passwords safe and secure.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" msgstr "" #. type: Plain text #: debconf.conf.5:506 #, no-wrap msgid "" " # Let's put them all together\n" " # in a database stack.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # So, all passwords go to the password database.\n" " # Most X configuration stuff goes to the X\n" " # database, and anything else goes to my main\n" " # database. Values are looked up in each of those\n" " # in turn, and if none has a particular value, it\n" " # is looked up in the company-wide LDAP database\n" " # (unless it's a password).\n" msgstr "" #. type: Plain text #: debconf.conf.5:514 #, no-wrap msgid "" " # A database is also used to hold templates. We\n" " # don't need to make this as fancy.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" msgstr "" #. type: SH #: debconf.conf.5:514 confmodule.3:22 #, no-wrap msgid "NOTES" msgstr "" #. type: Plain text #: debconf.conf.5:517 msgid "" "If you use something like ${HOME} in this file, it will be replaced with the " "value of the named environment variable." msgstr "" #. type: Plain text #: debconf.conf.5:521 msgid "" "Environment variables can also be used to override the databases on the fly, " "see B(7)" msgstr "" #. type: Plain text #: debconf.conf.5:524 msgid "" "The field names (the part of the line before the colon) is case-insensitive. " "The values, though, are case sensitive." msgstr "" #. type: SH #: debconf.conf.5:524 #, no-wrap msgid "PLANNED ENHANCEMENTS" msgstr "" #. type: Plain text #: debconf.conf.5:533 msgid "" "More drivers and formats. Some ideas include: A SQL driver, with the " "capability to access a remote database. A DHCP driver, that makes available " "some special things like hostname, IP address, and DNS servers. A driver " "that pulls values out of public DNS records TXT fields. A format that is " "compatible with the output of cdebconf. An override driver, which can " "override the value field or flags of all requests that pass through it." msgstr "" #. type: SH #: debconf.conf.5:533 #, no-wrap msgid "FILES" msgstr "" #. type: Plain text #: debconf.conf.5:535 msgid "/etc/debconf.conf" msgstr "" #. type: Plain text #: debconf.conf.5:537 msgid "~/.debconfrc" msgstr "" #. type: Plain text #: debconf.conf.5:539 msgid "B(7)" msgstr "" #. type: Plain text #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969 msgid "Joey Hess Ejoeyh@debian.orgE" msgstr "" #. type: TH #: confmodule.3:1 #, no-wrap msgid "CONFMODULE" msgstr "" #. type: Plain text #: confmodule.3:4 msgid "confmodule - communicate with Debian configuration system FrontEnd." msgstr "" #. type: Plain text #: confmodule.3:12 #, no-wrap msgid "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" msgstr "" #. type: Plain text #: confmodule.3:22 msgid "" "This is a library of shell functions that eases communication with Debian's " "configuration management system. It can communicate with a FrontEnd via the " "debconf protocol. The design is that each command in the protocol is " "represented by one function in this module. The functionname is the same as " "the command, except it is prefixed with \"db_\" and is lower-case. Call the " "function and pass in any parameters you want to follow the command. Any " "textual return code from the FrontEnd will be returned to you in the $RET " "variable, while the numeric return code from the FrontEnd will be returned " "as a return code (and so those return codes must be captured or ignored)." msgstr "" #. type: Plain text #: confmodule.3:29 #, no-wrap msgid "" "Once this library is loaded, any text you later output will go to standard\n" "error, rather than standard output. This is a good thing in general, because\n" "text sent to standard output is interpreted by the FrontEnd as commands. If\n" "you do want to send a command directly to the FrontEnd, you must output it\n" "to file descriptor 3, like this:\n" " echo GET foo/bar E&3\n" msgstr "" #. type: Plain text #: confmodule.3:36 msgid "" "The library checks to make sure it is actually speaking to a FrontEnd by " "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is " "assumed to be running. If not, the library turns into one, and runs a copy " "of the script that loaded the library connected to it. This means that if " "you source this library, you should do so very near to the top of your " "script, because everything before the sourcing of the library may well be " "run again." msgstr "" #. type: Plain text #: confmodule.3:42 msgid "" "B(7), B(8), B(8), " "debconf_specification in the debian-policy package" msgstr "" #. type: TH #: debconf.7:1 #, no-wrap msgid "DEBCONF" msgstr "" #. type: Plain text #: debconf.7:4 msgid "debconf - Debian package configuration system" msgstr "" #. type: Plain text #: debconf.7:8 msgid "" "Debconf is a configuration system for Debian packages. There is a rarely-" "used command named debconf, documented in B(1)" msgstr "" #. type: Plain text #: debconf.7:16 msgid "" "Debconf provides a consistent interface for configuring packages, allowing " "you to choose from several user interface frontends. It supports " "preconfiguring packages before they are installed, which allows large " "installs and upgrades to ask you for all the necessary information up front, " "and then go do the work while you do something else. It lets you, if you're " "in a hurry, skip over less important questions and information while " "installing a package (and revisit it later)." msgstr "" #. type: SH #: debconf.7:16 #, no-wrap msgid "Preconfiguring packages" msgstr "" #. type: Plain text #: debconf.7:22 msgid "" "Debconf can configure packages before they are even installed onto your " "system. This is useful because it lets all the questions the packages are " "going to ask be asked at the beginning of an install, so the rest of the " "install can proceed while you are away getting a cup of coffee." msgstr "" #. type: Plain text #: debconf.7:27 msgid "" "If you use apt (version 0.5 or above), and you have apt-utils installed, " "each package apt installs will be automatically preconfigured. This is " "controlled via I" msgstr "" #. type: Plain text #: debconf.7:33 msgid "" "Sometimes you might want to preconfigure a package by hand, when you're not " "installing it with apt. You can use B(8) to do that, " "just pass it the filenames of the packages you want to preconfigure. You " "will need apt-utils installed for that to work." msgstr "" #. type: SH #: debconf.7:33 #, no-wrap msgid "Reconfiguring packages" msgstr "" #. type: Plain text #: debconf.7:40 msgid "" "Suppose you installed the package, and answered debconf's questions, but now " "that you've used it awhile, you realize you want to go back and change some " "of your answers. In the past, reinstalling a package was often the thing to " "do when you got in this situation, but when you reinstall the package, " "debconf seems to remember you have answered the questions, and doesn't ask " "them again (this is a feature)." msgstr "" #. type: Plain text #: debconf.7:44 #, no-wrap msgid "" "Luckily, debconf makes it easy to reconfigure any package that uses it.\n" "Suppose you want to reconfigure debconf itself. Just run, as root:\n" " dpkg-reconfigure debconf\n" msgstr "" #. type: Plain text #: debconf.7:49 msgid "" "This will ask all the questions you saw when debconf was first installed. " "It may ask you other questions as well, since it asks even low priority " "questions that may have been skipped when the package was installed. You " "can use it on any other package that uses debconf, as well." msgstr "" #. type: SH #: debconf.7:49 #, no-wrap msgid "Frontends" msgstr "" #. type: Plain text #: debconf.7:53 msgid "" "One of debconf's unique features is that the interface it presents to you is " "only one of many, that can be swapped in at will. There are many debconf " "frontends available:" msgstr "" #. type: TP #: debconf.7:53 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:60 msgid "" "The default frontend, this uses the B(1) or B(1) " "programs to display questions to you. It works in text mode." msgstr "" #. type: TP #: debconf.7:60 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:72 msgid "" "The most traditional frontend, this looks quite similar to how Debian " "configuration always has been: a series of questions, printed out at the " "console using plain text, and prompts done using the readline library. It " "even supports tab completion. The libterm-readline-gnu-perl package is " "strongly recommended if you chose to use this frontend; the default readline " "module does not support prompting with default values. At the minimum, " "you'll need the perl-modules package installed to use this frontend." msgstr "" #. type: Plain text #: debconf.7:77 msgid "" "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to " "the previous question (if that is supported by the package that is using " "debconf), and pagedown (or ctrl-v) will skip forward to the next question." msgstr "" #. type: Plain text #: debconf.7:80 msgid "" "This is the best frontend for remote admin work over a slow connection, or " "for those who are comfortable with unix." msgstr "" #. type: TP #: debconf.7:81 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:90 msgid "" "This is the anti-frontend. It never interacts with you at all, and makes the " "default answers be used for all questions. It might mail error messages to " "root, but that's it; otherwise it is completely silent and unobtrusive, a " "perfect frontend for automatic installs. If you are using this front-end, " "and require non-default answers to questions, you will need to preseed the " "debconf database; see the section below on Unattended Package Installation " "for more details." msgstr "" #. type: TP #: debconf.7:90 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:96 msgid "" "This is a modern X GUI using the gtk and gnome libraries. Of course, it " "requires a valid DISPLAY to work; debconf will fall back to other frontends " "if it can't work. Note that this frontend requires you have the libgtk3-perl " "package installed." msgstr "" #. type: TP #: debconf.7:96 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:102 msgid "" "This frontend provides a modern X GUI based on the KDE Platform. You of " "course need a DISPLAY to use this frontend and you must install debconf-kde-" "helper package. The frontend will fall back to dialog if some of the " "prerequisites are not met." msgstr "" #. type: TP #: debconf.7:102 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:110 msgid "" "This is for those fanatics who have to do everything in a text editor. It " "runs your editor on a file that looks something like a typical unix config " "file, and you edit the file to communicate with debconf. Debconf's author " "prefers to not comment regarding the circumstances that led to this frontend " "being written." msgstr "" #. type: TP #: debconf.7:110 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:120 msgid "" "This frontend acts as a web server, that you connect to with your web " "browser, to browse the questions and answer them. It has a lot of promise, " "but is a little rough so far. When this frontend starts up, it will print " "out the location you should point your web browser to. You have to run the " "web browser on the same machine you are configuring, for security reasons." msgstr "" #. type: Plain text #: debconf.7:126 msgid "" "Do keep in mind that this is not a very secure frontend. Anyone who has " "access to the computer being configured can currently access the web server " "and configure things while this frontend is running. So this is more of a " "proof of concept than anything." msgstr "" #. type: Plain text #: debconf.7:133 #, no-wrap msgid "" "You can change the default frontend debconf uses by reconfiguring\n" "debconf. On the other hand, if you just want to change the frontend\n" "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n" "the name of the frontend to use. For example:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" msgstr "" #. type: Plain text #: debconf.7:141 msgid "" "The B(8) and B(8) commands also let " "you pass I<--frontend=> to them, followed by the frontend you want them to " "use." msgstr "" #. type: Plain text #: debconf.7:145 msgid "" "Note that not all frontends will work in all circumstances. If a frontend " "fails to start up for some reason, debconf will print out a message " "explaining why, and fall back to the next-most similar frontend." msgstr "" #. type: SH #: debconf.7:145 #, no-wrap msgid "Priorities" msgstr "" #. type: Plain text #: debconf.7:152 msgid "" "Another nice feature of debconf is that the questions it asks you are " "prioritized. If you don't want to be bothered about every little thing, you " "can set up debconf to only ask you the most important questions. On the " "other hand, if you are a control freak, you can make it show you all " "questions. Each question has a priority. In increasing order of importance:" msgstr "" #. type: TP #: debconf.7:152 debconf-devel.7:294 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:156 msgid "" "Very trivial questions that have defaults that will work in the vast " "majority of cases." msgstr "" #. type: TP #: debconf.7:156 debconf-devel.7:298 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:159 msgid "Normal questions that have reasonable defaults." msgstr "" #. type: TP #: debconf.7:159 debconf-devel.7:301 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:162 msgid "Questions that don't have a reasonable default." msgstr "" #. type: TP #: debconf.7:162 debconf-devel.7:304 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:165 msgid "Questions that you really, really need to see (or else)." msgstr "" #. type: Plain text #: debconf.7:175 msgid "" "Only questions with a priority equal to or greater than the priority you " "choose will be shown to you. You can set the priority value by reconfiguring " "debconf, or temporarily by passing I<--priority=> followed by the value to " "the B(8) and B(8) commands, or by " "setting the DEBIAN_PRIORITY environment variable." msgstr "" #. type: SH #: debconf.7:175 #, no-wrap msgid "Backend Database" msgstr "" #. type: Plain text #: debconf.7:187 msgid "" "Debconf uses a rather flexible and potentially complicated backend database " "for storing data such as the answers to questions. The file B is used to configure this database. If you need to set up something " "complicated, like make debconf read a remote database to get defaults, with " "local overrides, read the B(5) man page for all the gory " "details. Generally, the backend database is located in B ." msgstr "" #. type: SH #: debconf.7:187 #, no-wrap msgid "Unattended Package Installation" msgstr "" #. type: Plain text #: debconf.7:194 msgid "" "If you have many machines to manage you will sometimes find yourself in the " "position of needing to perform an unattended installation or upgrade of " "packages on many systems, when the default answers to some configuration " "questions are not acceptable. There are many ways to approach this; all " "involve setting up a database and making debconf use it to get the answers " "you want." msgstr "" #. type: Plain text #: debconf.7:198 msgid "" "You should really read B(5) before this section, as you need " "to understand how debconf's databases work." msgstr "" #. type: Plain text #: debconf.7:205 msgid "" "The easiest way to set up the database is to install the packages on one " "machine and answer their questions as usual. Or you might just use B(8) to configure a set of packages without actually installing " "them. Or you might even decide to write a plain text debconf database by " "hand or something." msgstr "" #. type: Plain text #: debconf.7:209 msgid "" "Once you have the database, you need to figure out how to make the remote " "systems use it. This depends of course on the configuration of those systems " "and what database types they are set up to use." msgstr "" #. type: Plain text #: debconf.7:213 msgid "" "If you are using the LDAP debconf database, an entire network of debian " "machines can also have any or all package installation questions answered " "automatically by a single LDAP server." msgstr "" #. type: Plain text #: debconf.7:222 msgid "" "But perhaps you're using something a little bit easier to set up like, say, " "the default debconf database configuration, or you just don't want your " "remote systems to use LDAP all the time. In this case the best approach is " "to temporarily configure the remote systems to stack your database " "underneath their own existing databases, so they pull default values out of " "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and " "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample " "use:" msgstr "" #. type: Plain text #: debconf.7:226 #, no-wrap msgid "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" msgstr "" #. type: Plain text #: debconf.7:232 msgid "" "This makes the debconf on the remote host read in the data that is piped " "across the ssh connection and interpret it as a plain text format debconf " "database. It then uses that database as a fallback database -- a read-only " "database that is queried for answers to questions if the system's main " "debconf database lacks answers." msgstr "" #. type: Plain text #: debconf.7:234 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:" msgstr "" #. type: Plain text #: debconf.7:237 #, no-wrap msgid "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" msgstr "" #. type: Plain text #: debconf.7:242 msgid "" "Here ssh is used to set up a tunneled LDAP connection and run debconf. " "Debconf is told to use the LDAP server as the fallback database. Note the " "use of \"{host:localhost}\" to configure how debconf accesses the LDAP " "database by providing the \"host\" field with a value of \"localhost\"." msgstr "" #. type: Plain text #: debconf.7:244 msgid "Here's another method:" msgstr "" #. type: Plain text #: debconf.7:247 #, no-wrap msgid "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" msgstr "" #. type: Plain text #: debconf.7:252 msgid "" "Here you copy the database over with scp, and then ssh over and make debconf " "use the file you copied over. This illustrates a shorthand you can use in " "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it " "defaults to \"filename\"." msgstr "" #. type: Plain text #: debconf.7:261 msgid "" "There is only one problem with these uses of the DEBCONF_DB_FALLBACK " "parameter: While the fallback database can provide answers to questions the " "other debconf databases have never seen, it is only queried as a fallback; " "after the other databases. If you need to instead temporarily override an " "existing value on the remote host, you should instead use the " "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a " "temporary database, but this database is consulted before any others, and " "can be used to override existing values." msgstr "" #. type: SH #: debconf.7:261 #, no-wrap msgid "Developing for Debconf" msgstr "" #. type: Plain text #: debconf.7:266 msgid "" "Package developers and others who want to develop packages that use debconf " "should read B(7) ." msgstr "" #. type: Plain text #: debconf.7:274 msgid "" "Briefly, debconf communicates with maintainer scripts or other programs via " "standard input and output, using a simple line-oriented command language " "similar to that used by common internet protocols such as SMTP. Programs use " "this protocol to ask debconf to display questions to the user, and retrieve " "the user's answers. The questions themselves are defined in a separate file, " "called the \"templates file\", which has a format not unlike a debian " "control file." msgstr "" #. type: Plain text #: debconf.7:278 msgid "" "Debian packages which use debconf typically provide both a templates file " "and a \"config\" script (run to preconfigure the package) in the control " "metadata section of the package." msgstr "" #. type: SH #: debconf.7:278 #, no-wrap msgid "ENVIRONMENT" msgstr "MILJØ" #. type: TP #: debconf.7:279 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:282 msgid "Used to temporarily change the frontend debconf uses. See above." msgstr "" "Brugt til midlertidigt at ændre den brugerflade som debconf bruger Se " "ovenfor." #. type: TP #: debconf.7:282 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:286 msgid "" "Used to temporarily change the minimum priority of question debconf will " "display. See above." msgstr "" #. type: TP #: debconf.7:286 debconf-devel.7:576 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:292 msgid "" "Turns on debugging output on standard error. May be set to a facility name " "or a regular expression which matches a facility name (such as '.*' to " "output all debug info). The facility names include:" msgstr "" #. type: TP #: debconf.7:292 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:295 msgid "Debugging info of interest to a debconf user." msgstr "Fejlsøgningsinformation af interesse for en debconfbruger." #. type: TP #: debconf.7:295 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:298 msgid "Debugging info of interest to a package developer." msgstr "Fejlsøgningsinformation af interesse for en pakkeudvikler." #. type: TP #: debconf.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:301 msgid "Debugging info about the backend database." msgstr "Fejlsøgningsinformation om motorens database." #. type: TP #: debconf.7:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:306 msgid "" "Set to \"yes\" to disable some warnings that debconf may display. Does not " "suppress display of fatal errors." msgstr "" "Sat til yes (ja) for at deaktivere nogle advarsler som debconf måske viser. " "Undertrykker ikke visning af fatale fejl." #. type: TP #: debconf.7:306 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:310 msgid "" "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on " "the verbiage as much as possible." msgstr "" #. type: TP #: debconf.7:310 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:320 msgid "" "Stack a database after the normally used databases, so that it is used as a " "fallback to get configuration information from. See \"Unattended Package " "Installation\" above. If the value of the variable is the name of an " "existing database in debconf.conf, then that database will be used. " "Otherwise, the environment variable can be used to configure a database on " "the fly, by telling the type of database, and optionally passing field:value " "settings, inside curly braces after the type. Spaces are used to separate " "fields, so you cannot specify a field value containing whitespace." msgstr "" #. type: Plain text #: debconf.7:323 #, no-wrap msgid "" "Thus, this uses the fallbackdb in debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" msgstr "" #. type: Plain text #: debconf.7:327 #, no-wrap msgid "" "While this sets up a new database of type File, and tells it a filename to\n" "use and turns off backups:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" msgstr "" #. type: Plain text #: debconf.7:330 #, no-wrap msgid "" "And as a shorthand, this sets up a database of type File with a filename:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" msgstr "" #. type: Plain text #: debconf.7:333 msgid "" "Note that if a fallback database is set up on the fly, it will be read-only " "by default." msgstr "" #. type: TP #: debconf.7:333 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:338 msgid "" "Stack a database before the normally used databases, so that it can override " "values from them. The value of the variable works the same as does the value " "of DEBCONF_DB_FALLBACK." msgstr "" #. type: TP #: debconf.7:338 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:343 msgid "" "Use a given database instead of the normally used databases. This may be " "useful for testing with a separate database without having to create a " "separate debconf.conf, or to avoid locking the normal databases." msgstr "" #. type: TP #: debconf.7:343 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:349 msgid "" "If this environment variable is set, debconf will ignore a user's ~/." "debconfrc file, and use the system one instead. If it is set to the name of " "a regular file, debconf will use that file in preference to the system " "configuration files." msgstr "" #. type: TP #: debconf.7:349 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:353 msgid "" "If this environment variable is set, debconf will use dialog in preference " "to whiptail for the dialog frontend." msgstr "" #. type: TP #: debconf.7:353 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:357 msgid "" "If this environment variable is set, debconf will use Xdialog in preference " "to whiptail for the dialog frontend." msgstr "" #. type: TP #: debconf.7:357 #, no-wrap msgid "B" msgstr "" #. type: Plain text #: debconf.7:361 msgid "" "Set to \"true\" to cause the seen flag to be set for questions asked in the " "noninteractive frontend." msgstr "" #. type: SH #: debconf.7:361 #, no-wrap msgid "BUGS" msgstr "FEJL" #. type: Plain text #: debconf.7:363 msgid "Probably quite a few, there's a lot of code here." msgstr "Sikkert en del, der er meget kode her." #. type: Plain text #: debconf.7:365 msgid "" "If you do file a bug report, be sure to include the following information:" msgstr "" "Hvis du indsender en fejlrapport, så sikr dig at du inkluderer den følgende " "information:" #. type: TP #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484 #: debconf-devel.7:489 #, no-wrap msgid "B<*>" msgstr "B<*>" #. type: Plain text #: debconf.7:368 msgid "The debconf frontend you were using when the problem occurred" msgstr "Brugerfladen for debconf som du brugt da problemet opstod" #. type: Plain text #: debconf.7:371 msgid "What you did to trigger the problem." msgstr "Hvad du gjorde som udløste problemet." #. type: Plain text #: debconf.7:376 msgid "" "The full text of any error messages. If you can reproduce the bug, do so " "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot." msgstr "" "Den fulde tekst for eventuelle fejlbeskeder. Hvis du kan genskabe fejlen, så " "gør det med DEBCONF_DEBUG=».*« angivet og eksporteret. Dette øger markant " "hastigheden for fejlsøgning." #. type: Plain text #: debconf.7:382 msgid "" "B(5), B(7), B(8), B(8), B(1)," msgstr "" #. type: TH #: debconf-devel.7:1 #, no-wrap msgid "DEBCONF-DEVEL" msgstr "" #. type: Plain text #: debconf-devel.7:4 msgid "debconf - developers guide" msgstr "debconf - vejledning for udviklere" #. type: Plain text #: debconf-devel.7:6 msgid "This is a guide for developing packages that use debconf." msgstr "Dette er en vejledning for udvikling af pakker som bruger debconf." #. type: Plain text #: debconf-devel.7:9 msgid "" "This manual assumes that you are familiar with debconf as a user, and are " "familiar with the basics of debian package construction." msgstr "" "Denne manual antager at du er bekendt med debconf som en bruger, og at du er " "bekendt med den grundlæggende konstruktion for en debianpakke." #. type: Plain text #: debconf-devel.7:18 msgid "" "This manual begins by explaining two new files that are added to debian " "packages that use debconf. Then it explains how the debconf protocol works, " "and points you at some libraries that will let your programs speak the " "protocol. It discusses other maintainer scripts that debconf is typically " "used in: the postinst and postrm scripts. Then moves on to more advanced " "topics like shared debconf templates, debugging, and some common techniques " "and pitfalls of programming with debconf. It closes with a discussion of " "debconf's current shortcomings." msgstr "" #. type: SH #: debconf-devel.7:18 #, no-wrap msgid "THE CONFIG SCRIPT" msgstr "" #. type: Plain text #: debconf-devel.7:23 msgid "" "Debconf adds an additional maintainer script, the config script, to the set " "of maintainer scripts that can be in debian packages (the postinst, preinst, " "postrm, and prerm). The config script is responsible for asking any " "questions necessary to configure the package." msgstr "" #. type: Plain text #: debconf-devel.7:28 msgid "" "Note: It is a little confusing that dpkg refers to running a package's " "postinst script as \"configuring\" the package, since a package that uses " "debconf is often fully pre-configured, by its config script, before the " "postinst ever runs. Oh well." msgstr "" #. type: Plain text #: debconf-devel.7:34 msgid "" "Like the postinst, the config script is passed two parameters when it is " "run. The first tells what action is being performed, and the second is the " "version of the package that is currently installed. So, like in a postinst, " "you can use dpkg --compare-versions on $2 to make some behavior happen only " "on upgrade from a particular version of a package, and things like that." msgstr "" #. type: Plain text #: debconf-devel.7:36 msgid "The config script can be run in one of three ways:" msgstr "Konfigurationsskriptet kan køres på en af tre måder:" #. type: TP #: debconf-devel.7:36 #, no-wrap msgid "B<1>" msgstr "B<1>" #. type: Plain text #: debconf-devel.7:40 msgid "" "If a package is pre-configured, with dpkg-preconfigure, its config script is " "run, and is passed the parameters \"configure\", and installed-version." msgstr "" #. type: TP #: debconf-devel.7:40 #, no-wrap msgid "B<2>" msgstr "B<2>" #. type: Plain text #: debconf-devel.7:47 msgid "" "When a package's postinst is run, debconf will try to run the config script " "then too, and it will be passed the same parameters it was passed when it is " "pre-configured. This is necessary because the package might not have been " "pre-configured, and the config script still needs to get a chance to run. " "See HACKS for details." msgstr "" #. type: TP #: debconf-devel.7:47 #, no-wrap msgid "B<3>" msgstr "B<3>" #. type: Plain text #: debconf-devel.7:52 msgid "" "If a package is reconfigured, with dpkg-reconfigure, its config script it " "run, and is passed the parameters \"reconfigure\" and installed-version." msgstr "" #. type: Plain text #: debconf-devel.7:58 msgid "" "Note that since a typical package install or upgrade using apt runs steps 1 " "and 2, the config script will typically be run twice. It should do nothing " "the second time (to ask questions twice in a row is annoying), and it should " "definitely be idempotent. Luckily, debconf avoids repeating questions by " "default, so this is generally easy to accomplish." msgstr "" #. type: Plain text #: debconf-devel.7:64 msgid "" "Note that the config script is run before the package is unpacked. It should " "only use commands that are in essential packages. The only dependency of " "your package that is guaranteed to be met when its config script is run is a " "dependency (possibly versioned) on debconf itself." msgstr "" #. type: Plain text #: debconf-devel.7:70 msgid "" "The config script should not need to modify the filesystem at all. It just " "examines the state of the system, and asks questions, and debconf stores the " "answers to be acted on later by the postinst script. Conversely, the " "postinst script should almost never use debconf to ask questions, but should " "instead act on the answers to questions asked by the config script." msgstr "" #. type: SH #: debconf-devel.7:70 #, no-wrap msgid "THE TEMPLATES FILE" msgstr "SKABELONFILEN" #. type: Plain text #: debconf-devel.7:73 msgid "" "A package that uses debconf probably wants to ask some questions. These " "questions are stored, in template form, in the templates file." msgstr "" "En pakke som bruger debconf vil sikkert ønske at stille nogle spørgsmål. " "Disse spørgsmål gemmes, i skabelonform, i skabelonfilen." #. type: Plain text #: debconf-devel.7:78 msgid "" "Like the config script, the templates file is put in the control.tar.gz " "section of a deb. Its format is similar to a debian control file; a set of " "stanzas separated by blank lines, with each stanza having a RFC822-like form:" msgstr "" #. type: Plain text #: debconf-devel.7:94 #, no-wrap msgid "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: This is a sample string question.\n" " This is its extended description.\n" " .\n" " Notice that:\n" " - Like in a debian package description, a dot\n" " on its own line sets off a new paragraph.\n" " - Most text is word-wrapped, but doubly-indented\n" " text is left alone, so you can use it for lists\n" " of items, like this list. Be careful, since\n" " it is not word-wrapped, if it's too wide\n" " it will look bad. Using it for short items\n" " is best (so this is a bad example).\n" msgstr "" #. type: Plain text #: debconf-devel.7:99 #, no-wrap msgid "" " Template: foo/baz\n" " Type: boolean\n" " Description: Clear enough, no?\n" " This is another question, of boolean type.\n" msgstr "" #. type: Plain text #: debconf-devel.7:103 msgid "" "For some real-life examples of templates files, see /var/lib/dpkg/info/" "debconf.templates, and other .templates files in that directory." msgstr "" #. type: Plain text #: debconf-devel.7:105 msgid "Let's look at each of the fields in turn.." msgstr "" #. type: TP #: debconf-devel.7:105 #, no-wrap msgid "B