/* Copyright (c) 1993-2008, Cognitive Technologies All rights reserved. Разрешается повторное распространение и использование как в виде исходного кода, так и в двоичной форме, с изменениями или без, при соблюдении следующих условий: * При повторном распространении исходного кода должны оставаться указанное выше уведомление об авторском праве, этот список условий и последующий отказ от гарантий. * При повторном распространении двоичного кода в документации и/или в других материалах, поставляемых при распространении, должны сохраняться указанная выше информация об авторском праве, этот список условий и последующий отказ от гарантий. * Ни название Cognitive Technologies, ни имена ее сотрудников не могут быть использованы в качестве средства поддержки и/или продвижения продуктов, основанных на этом ПО, без предварительного письменного разрешения. ЭТА ПРОГРАММА ПРЕДОСТАВЛЕНА ВЛАДЕЛЬЦАМИ АВТОРСКИХ ПРАВ И/ИЛИ ДРУГИМИ ЛИЦАМИ "КАК ОНА ЕСТЬ" БЕЗ КАКОГО-ЛИБО ВИДА ГАРАНТИЙ, ВЫРАЖЕННЫХ ЯВНО ИЛИ ПОДРАЗУМЕВАЕМЫХ, ВКЛЮЧАЯ ГАРАНТИИ КОММЕРЧЕСКОЙ ЦЕННОСТИ И ПРИГОДНОСТИ ДЛЯ КОНКРЕТНОЙ ЦЕЛИ, НО НЕ ОГРАНИЧИВАЯСЬ ИМИ. НИ ВЛАДЕЛЕЦ АВТОРСКИХ ПРАВ И НИ ОДНО ДРУГОЕ ЛИЦО, КОТОРОЕ МОЖЕТ ИЗМЕНЯТЬ И/ИЛИ ПОВТОРНО РАСПРОСТРАНЯТЬ ПРОГРАММУ, НИ В КОЕМ СЛУЧАЕ НЕ НЕСЁТ ОТВЕТСТВЕННОСТИ, ВКЛЮЧАЯ ЛЮБЫЕ ОБЩИЕ, СЛУЧАЙНЫЕ, СПЕЦИАЛЬНЫЕ ИЛИ ПОСЛЕДОВАВШИЕ УБЫТКИ, СВЯЗАННЫЕ С ИСПОЛЬЗОВАНИЕМ ИЛИ ПОНЕСЕННЫЕ ВСЛЕДСТВИЕ НЕВОЗМОЖНОСТИ ИСПОЛЬЗОВАНИЯ ПРОГРАММЫ (ВКЛЮЧАЯ ПОТЕРИ ДАННЫХ, ИЛИ ДАННЫЕ, СТАВШИЕ НЕГОДНЫМИ, ИЛИ УБЫТКИ И/ИЛИ ПОТЕРИ ДОХОДОВ, ПОНЕСЕННЫЕ ИЗ-ЗА ДЕЙСТВИЙ ТРЕТЬИХ ЛИЦ И/ИЛИ ОТКАЗА ПРОГРАММЫ РАБОТАТЬ СОВМЕСТНО С ДРУГИМИ ПРОГРАММАМИ, НО НЕ ОГРАНИЧИВАЯСЬ ЭТИМИ СЛУЧАЯМИ), НО НЕ ОГРАНИЧИВАЯСЬ ИМИ, ДАЖЕ ЕСЛИ ТАКОЙ ВЛАДЕЛЕЦ ИЛИ ДРУГОЕ ЛИЦО БЫЛИ ИЗВЕЩЕНЫ О ВОЗМОЖНОСТИ ТАКИХ УБЫТКОВ И ПОТЕРЬ. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Cognitive Technologies nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ ////////////////////////////////////////////////////// // Rotation routines: // // inline Point32& Deskew( Point32& pt, int32_t skew1024); // inline Point16& Deskew( Point16& pt, int32_t skew1024); // // NOTE: POSITIVE SKEW == CLOCKWISE ////////////////////////////////////////////////////// #ifdef __cplusplus #ifndef __SKEW1024_H #define __SKEW1024_H #include "cttypes.h" inline Point32& Deskew( Point32& pt, int32_t skew1024) { long phi_sq = (skew1024*skew1024); long dx = ( (skew1024*pt.y+0x200) >> 10 ); long dy = ( (skew1024*pt.x+0x200) >> 10 ); long ddx =( (phi_sq*pt.x+0x100000) >> 21 ); long ddy =( (phi_sq*pt.y+0x100000) >> 21 ); pt.x -= dx; pt.x -= ddx; pt.y += dy; pt.y -= ddy; return pt; } inline Point16& Deskew( Point16& pt, int32_t skew1024) { long phi_sq = (skew1024*skew1024); long dx = ( (skew1024*(long)pt.y+0x200) >> 10 ); long dy = ( (skew1024*(long)pt.x+0x200) >> 10 ); long ddx =( (phi_sq*(long)pt.x+0x100000) >> 21 ); long ddy =( (phi_sq*(long)pt.y+0x100000) >> 21 ); pt.x -= (int16_t)dx; pt.x -= (int16_t)ddx; pt.y += (int16_t)dy; pt.y -= (int16_t)ddy; return pt; } inline Point32& DeskewRel( Point32& pt, int32_t skew1024, Point32& rel ) { pt.x -= rel.x; pt.y -= rel.y; Deskew( pt, skew1024 ); pt.x += rel.x; pt.y += rel.y; return pt; } inline Point16& DeskewRel( Point16& pt, int32_t skew1024, Point16& rel ) { pt.x -= rel.x; pt.y -= rel.y; Deskew( pt, skew1024 ); pt.x += rel.x; pt.y += rel.y; return pt; } inline Point32& GetCenter( const Rect32& rc, Point32& center) { center.x = (rc.left+rc.right)>>1; center.y = (rc.top+rc.bottom)>>1; return center; } inline Point16& GetCenter( const Rect16& rc, Point16& center) { center.x = (rc.left+rc.right)>>1; center.y = (rc.top+rc.bottom)>>1; return center; } inline Point32& Copy(Point32& dst, Point16 const & src) { dst.x=src.x; dst.y=src.y; return dst; } inline Point16& Copy(Point16& dst, Point32 const & src) { dst.x=(int16_t)src.x; dst.y=(int16_t)src.y; return dst; } inline Rect32& Copy(Rect32& dst, Rect16 const & src) { dst.left = src.left; dst.right = src.right; dst.top = src.top; dst.bottom = src.bottom; return dst; } inline Rect16& Copy(Rect16& dst, Rect32 const & src) { dst.left = (int16_t)src.left; dst.right = (int16_t)src.right; dst.top = (int16_t)src.top; dst.bottom = (int16_t)src.bottom; return dst; } ////////////////////////////////////////////////////////// // diagonal points => rect inline Rect32& Pt2Rc(Rect32& dst, Point16 const & a, Point16 const & b ) { dst.left = a.x; dst.right = b.x; dst.top = a.y; dst.bottom = b.y; return dst; } inline Rect16& Pt2Rc(Rect16& dst, Point16 const & a, Point16 const & b ) { dst.left = a.x; dst.right = b.x; dst.top = a.y; dst.bottom = b.y; return dst; } inline Rect32& Pt2Rc(Rect32& dst, Point32 const & a, Point32 const & b ) { dst.left = a.x; dst.right = b.x; dst.top = a.y; dst.bottom = b.y; return dst; } inline Rect16& Pt2Rc(Rect16& dst, Point32 const & a, Point32 const & b ) { dst.left = (int16_t)a.x; dst.right = (int16_t)b.x; dst.top = (int16_t)a.y; dst.bottom = (int16_t)b.y; return dst; } //////////////////////////////////////////////////// // movements ( -=, += ) #define RC_MINUS_PT { rc.left -= pt.x; rc.right -= pt.x; rc.top -= pt.y; rc.bottom-= pt.y; return rc; } #define RC_PLUS_PT { rc.left += pt.x; rc.right += pt.x; rc.top += pt.y; rc.bottom+= pt.y; return rc; } #define RC_MINUS_PT_16 { rc.left -= (int16_t)pt.x; rc.right -= (int16_t)pt.x; rc.top -= (int16_t)pt.y; rc.bottom-= (int16_t)pt.y; return rc; } #define RC_PLUS_PT_16 { rc.left += (int16_t)pt.x; rc.right += (int16_t)pt.x; rc.top += (int16_t)pt.y; rc.bottom+= (int16_t)pt.y; return rc; } inline Rect32& operator -=(Rect32& rc, Point32 const & pt) RC_MINUS_PT inline Rect16& operator -=(Rect16& rc, Point16 const & pt) RC_MINUS_PT_16 inline Rect32& operator -=(Rect32& rc, Point16 const & pt) RC_MINUS_PT inline Rect16& operator -=(Rect16& rc, Point32 const & pt) RC_MINUS_PT_16 inline Rect32& operator +=(Rect32& rc, Point32 const & pt) RC_PLUS_PT inline Rect16& operator +=(Rect16& rc, Point16 const & pt) RC_PLUS_PT_16 inline Rect32& operator +=(Rect32& rc, Point16 const & pt) RC_PLUS_PT inline Rect16& operator +=(Rect16& rc, Point32 const & pt) RC_PLUS_PT_16 #define PT_MINUS_PT { pt.x -= pt1.x; pt.y -= pt1.y; return pt; } #define PT_PLUS_PT { pt.x += pt1.x; pt.y += pt1.y; return pt; } inline Point32& operator -=(Point32& pt, Point32 const & pt1) PT_MINUS_PT inline Point16& operator -=(Point16& pt, Point16 const & pt1) PT_MINUS_PT inline Point32& operator -=(Point32& pt, Point16 const & pt1) PT_MINUS_PT inline Point16& operator -=(Point16& pt, Point32 const & pt1) PT_MINUS_PT inline Point32& operator +=(Point32& pt, Point32 const & pt1) PT_PLUS_PT inline Point16& operator +=(Point16& pt, Point16 const & pt1) PT_PLUS_PT inline Point32& operator +=(Point32& pt, Point16 const & pt1) PT_PLUS_PT inline Point16& operator +=(Point16& pt, Point32 const & pt1) PT_PLUS_PT ////////////////////////////////////////////////// // With integer: *= /= -= += // --- addition --- inline Rect32& operator +=(Rect32& rc, const int a ) { rc.left += a; rc.right += a; rc.top += a; rc.bottom+= a; return rc; } inline Rect16& operator +=(Rect16& rc, const int a ) { rc.left += a; rc.right += a; rc.top += a; rc.bottom+= a; return rc; } inline Point32& operator +=(Point32& pt, const int a ) { pt.x += a; pt.y += a; return pt; } inline Point16& operator +=(Point16& pt, const int a ) { pt.x += a; pt.y += a; return pt; } // --- subtraction --- inline Rect32& operator -=(Rect32& rc, const int a ) { rc.left -= a; rc.right -= a; rc.top -= a; rc.bottom-= a; return rc; } inline Rect16& operator -=(Rect16& rc, const int a ) { rc.left -= a; rc.right -= a; rc.top -= a; rc.bottom-= a; return rc; } inline Point32& operator -=(Point32& pt, const int a ) { pt.x -= a; pt.y -= a; return pt; } inline Point16& operator -=(Point16& pt, const int a ) { pt.x -= a; pt.y -= a; return pt; } // --- multiplication --- #define RC_MUL_A { rc.left*=a; rc.right*=a; rc.top*=a; rc.bottom*=a; return rc;} inline Rect32& operator *=(Rect32& rc, const int a ) RC_MUL_A inline Rect16& operator *=(Rect16& rc, const int a ) RC_MUL_A inline Rect32& operator *=(Rect32& rc, const double a ) RC_MUL_A inline Rect16& operator *=(Rect16& rc, const double a ) RC_MUL_A #define PT_MUL_A { pt.x *= a; pt.y *= a; return pt; } inline Point32& operator *=(Point32& pt, const int a ) PT_MUL_A inline Point16& operator *=(Point16& pt, const int a ) PT_MUL_A inline Point32& operator *=(Point32& pt, double a ) PT_MUL_A inline Point16& operator *=(Point16& pt, double a ) PT_MUL_A // --- division --- inline Rect32& operator /=(Rect32& rc, const int a ) { rc.left /= a; rc.right /= a; rc.top /= a; rc.bottom/= a; return rc; } inline Rect16& operator /=(Rect16& rc, const int a ) { rc.left /= a; rc.right /= a; rc.top /= a; rc.bottom/= a; return rc; } inline Point32& operator /=(Point32& pt, const int a ) { pt.x /= a; pt.y /= a; return pt; } inline Point16& operator /=(Point16& pt, const int a ) { pt.x /= a; pt.y /= a; return pt; } ////////////////////////////////////////////////// // equality inline Bool operator == ( const Rect16& r1, const Rect16& r2 ) { return r1.left == r2.left && r1.top == r2.top && r1.right == r2.right && r1.bottom== r2.bottom; } inline Bool operator == ( const Rect32& r1, const Rect32& r2 ) { return r1.left == r2.left && r1.top == r2.top && r1.right == r2.right && r1.bottom== r2.bottom; } inline Bool operator == ( const Point16& p1, const Point16& p2 ) { return p1.x == p2.x && p1.y == p2.y; } inline Bool operator == ( const Point32& p1, const Point32& p2 ) { return p1.x == p2.x && p1.y == p2.y; } ////////////////////////////////////////////////// inline Rect32& DeskewCenter( Rect32& rc, int32_t skew1024) { Point32 center; GetCenter(rc, center); Point32 old_center = center; Deskew( center, skew1024 ); center -= old_center; // diff rc += center; return rc; } inline Rect16& DeskewCenter( Rect16& rc, int32_t skew1024) { Point16 center; GetCenter(rc, center); Point16 old_center = center; Deskew( center, skew1024 ); center -= old_center; // diff rc += center; return rc; } inline Rect32& DeskewCenterRel( Rect32& rc, int32_t skew1024, Point32& pt) { Point32 center; GetCenter(rc, center); Point32 old_center = center; DeskewRel( center, skew1024, pt ); center -= old_center; // diff rc += center; return rc; } inline Rect16& DeskewCenterRel( Rect16& rc, int32_t skew1024, Point16& pt) { Point16 center; GetCenter(rc, center); Point16 old_center = center; DeskewRel( center, skew1024, pt ); center -= old_center; // diff rc += center; return rc; } inline Rect16& Expand( Rect16& rc, int16_t delta ) { rc.left -= delta; rc.top -= delta; rc.right+= delta; rc.bottom+= delta; return rc; } inline Rect32& Expand( Rect32& rc, int32_t delta ) { rc.left -= delta; rc.top -= delta; rc.right+= delta; rc.bottom+= delta; return rc; } // make points: lt & rb (main diag) or rt & lb (other) inline void GetDiag1( Rect32& rc, Point32& lt, Point32& rb ) { lt.x = rc.left; lt.y = rc.top; rb.x = rc.right;rb.y = rc.bottom; } inline void GetDiag1( Rect16& rc, Point16& lt, Point16& rb ) { lt.x = rc.left; lt.y = rc.top; rb.x = rc.right;rb.y = rc.bottom; } inline void GetDiag2( Rect32& rc, Point32& rt, Point32& lb ) { rt.x = rc.right; rt.y = rc.top; lb.x = rc.left;lb.y = rc.bottom; } inline void GetDiag2( Rect16& rc, Point16& rt, Point16& lb ) { rt.x = rc.right; rt.y = rc.top; lb.x = rc.left;lb.y = rc.bottom; } inline Rect32& GetBounding( Rect32& rc_src, Rect32& rc_dest, int32_t skew1024 ) // dest rect can be the same as source { Point32 lt, rb; GetDiag1(rc_src, lt, rb); Deskew(lt, skew1024); Deskew(rb, skew1024); Point32 rt, lb; GetDiag2(rc_src, rt, lb); Deskew(rt, skew1024); Deskew(lb, skew1024); if (skew1024 < 0) { rc_dest.left = lt.x; rc_dest.right = rb.x; rc_dest.top = rt.y; rc_dest.bottom= lb.y; } else { rc_dest.left = lb.x; rc_dest.right = rt.x; rc_dest.top = lt.y; rc_dest.bottom= rb.y; }; return rc_dest; } inline Rect16& GetBounding( Rect16& rc_src, Rect16& rc_dest, int32_t skew1024 ) // dest rect can be the same as source { Point16 lt, rb; GetDiag1(rc_src, lt, rb); Deskew(lt, skew1024); Deskew(rb, skew1024); Point16 rt, lb; GetDiag2(rc_src, rt, lb); Deskew(rt, skew1024); Deskew(lb, skew1024); if (skew1024 < 0) { rc_dest.left = lt.x; rc_dest.right = rb.x; rc_dest.top = rt.y; rc_dest.bottom= lb.y; } else { rc_dest.left = lb.x; rc_dest.right = rt.x; rc_dest.top = lt.y; rc_dest.bottom= rb.y; }; return rc_dest; } ////////////////////////////////////////////////////////// // inequality #define RC_NOTEQ_RC { return r1.left != r2.left || r1.top != r2.top \ || r1.right != r2.right || r1.bottom!= r2.bottom; } inline Bool operator != ( const Rect16& r1, const Rect16& r2) RC_NOTEQ_RC inline Bool operator != ( const Rect16& r1, const Rect32& r2) RC_NOTEQ_RC inline Bool operator != ( const Rect32& r1, const Rect16& r2) RC_NOTEQ_RC inline Bool operator != ( const Rect32& r1, const Rect32& r2) RC_NOTEQ_RC #define PT_NOTEQ_PT { return pt1.x != pt2.x || pt1.y != pt2.y; } inline Bool operator != ( const Point16& pt1, const Point16& pt2) PT_NOTEQ_PT inline Bool operator != ( const Point16& pt1, const Point32& pt2) PT_NOTEQ_PT inline Bool operator != ( const Point32& pt1, const Point16& pt2) PT_NOTEQ_PT inline Bool operator != ( const Point32& pt1, const Point32& pt2) PT_NOTEQ_PT /////////////////////////////////////////////////////////////// // 22.03.97 17:48, V.P inline Bool operator !(const Rect16 & r) { return (r.left > r.right)||(r.top > r.bottom); } inline Bool operator !(const Rect32 & r) { return (r.left > r.right)||(r.top > r.bottom); } inline Bool Not(const Rect16 & r) { return (r.left > r.right)||(r.top > r.bottom); } inline Bool Not(const Rect32 & r) { return (r.left > r.right)||(r.top > r.bottom); } #define SetMax( a, b ) { if ((a) < (b)) (a) = (b); } #define SetMin( a, b ) { if ((a) > (b)) (a) = (b); } inline Rect32& operator |=(Rect32& rc, const Rect32& r) { SetMin( rc.left, r.left ); SetMin( rc.top , r.top ); SetMax( rc.right, r.right); SetMax( rc.bottom, r.bottom ); return rc; } inline Rect16& operator |=(Rect16& rc, const Rect16& r) { SetMin( rc.left, r.left ); SetMin( rc.top , r.top ); SetMax( rc.right, r.right); SetMax( rc.bottom, r.bottom ); return rc; } inline Rect32& operator &=(Rect32& rc, const Rect32& r) { SetMax( rc.left, r.left ); SetMax( rc.top , r.top ); SetMin( rc.right, r.right); SetMin( rc.bottom, r.bottom ); return rc; } inline Rect16& operator &=(Rect16& rc, const Rect16& r) { SetMax( rc.left, r.left ); SetMax( rc.top , r.top ); SetMin( rc.right, r.right); SetMin( rc.bottom, r.bottom ); return rc; } inline Rect16& Set( Rect16& r, int left, int top, int right, int bottom ) { r.left=left; r.top=top; r.right=right; r.bottom=bottom; return r; } inline Rect32& Set( Rect32& r, int left, int top, int right, int bottom ) { r.left=left; r.top=top; r.right=right; r.bottom=bottom; return r; } inline Rect16& Check( Rect16& r ) { if (r.left>r.right) {int x=r.left; r.left=r.right; r.right=x; }; if (r.top>r.bottom) {int x=r.top; r.top=r.bottom; r.bottom=x; } return r; } inline Rect32& Check( Rect32& r ) { if (r.left>r.right) {int x=r.left; r.left=r.right; r.right=x; }; if (r.top>r.bottom) {int x=r.top; r.top=r.bottom; r.bottom=x; } return r; } inline Point16& Set( Point16& p, int x, int y ){ p.x=x; p.y=y; return p; } inline Point32& Set( Point32& p, int x, int y ){ p.x=x; p.y=y; return p; } inline int width( const Rect16& rc ) { return rc.right-rc.left+1; } inline int width( const Rect32& rc ) { return rc.right-rc.left+1; } inline int height( const Rect16& rc ) { return rc.bottom-rc.top+1; } inline int height( const Rect32& rc ) { return rc.bottom-rc.top+1; } inline Bool Overlap( const Rect16& r1, const Rect16& r2 ) { return !( (r1.left > r2.right)||(r1.top > r2.bottom) || (r2.left > r1.right)||(r2.top > r1.bottom) ); } inline Bool Overlap( const Rect32& r1, const Rect32& r2 ) { return !( (r1.left > r2.right)||(r1.top > r2.bottom) || (r2.left > r1.right)||(r2.top > r1.bottom) ); } inline Bool Inside( const Rect16& r, const Point16 & p) { return !( (p.x < r.left)||(p.x > r.right )|| (p.y < r.top) ||(p.y > r.bottom) ); } inline Bool Inside( const Rect32& r, const Point32 & p) { return !( (p.x < r.left)||(p.x > r.right )|| (p.y < r.top) ||(p.y > r.bottom) ); } inline Bool Overlap( int a1, int a2, int b1, int b2 ) // two ranges intersection { // assumed that a1 <= a2; b1 <= b2 return !( (a2 < b1) || (b2 < a1) ); } #endif #endif // __cplusplus