* The sockets listed in the read array will be * watched to see if characters become available for reading (more * precisely, to see if a read will not block - in particular, a socket * resource is also ready on end-of-file, in which case a * socket_read will return a zero length string). *

* @param write array

* The sockets listed in the write array will be * watched to see if a write will not block. *

* @param except array

* The sockets listed in the except array will be * watched for exceptions. *

* @param tv_sec int

* The tv_sec and tv_usec * together form the timeout parameter. The * timeout is an upper bound on the amount of time * elapsed before socket_select return. * tv_sec may be zero , causing * socket_select to return immediately. This is useful * for polling. If tv_sec is &null; (no timeout), * socket_select can block indefinitely. *

* @param tv_usec int[optional]

*

* @return int On success socket_select returns the number of * socket resources contained in the modified arrays, which may be zero if * the timeout expires before anything interesting happens. On error false * is returned. The error code can be retrieved with * socket_last_error. *

* *

* Be sure to use the === operator when checking for an * error. Since the socket_select may return 0 the * comparison with == would evaluate to true: * * Understanding socket_select's result * * ]]> */ function socket_select (array &$read, array &$write, array &$except, $tv_sec, $tv_usec = null) {} /** * Create a socket (endpoint for communication) * @link http://www.php.net/manual/en/function.socket-create.php * @param domain int

* The domain parameter specifies the protocol * family to be used by the socket. *

* * Available address/protocol families * * * * * * * * * * * * * * * * * * * * * * *
DomainDescription
AF_INET * IPv4 Internet based protocols. TCP and UDP are common protocols of * this protocol family. *
AF_INET6 * IPv6 Internet based protocols. TCP and UDP are common protocols of * this protocol family. *
AF_UNIX * Local communication protocol family. High efficiency and low * overhead make it a great form of IPC (Interprocess Communication). *
* @param type int

* The type parameter selects the type of communication * to be used by the socket. *

* * Available socket types * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
TypeDescription
SOCK_STREAM * Provides sequenced, reliable, full-duplex, connection-based byte streams. * An out-of-band data transmission mechanism may be supported. * The TCP protocol is based on this socket type. *
SOCK_DGRAM * Supports datagrams (connectionless, unreliable messages of a fixed maximum length). * The UDP protocol is based on this socket type. *
SOCK_SEQPACKET * Provides a sequenced, reliable, two-way connection-based data transmission path for * datagrams of fixed maximum length; a consumer is required to read an * entire packet with each read call. *
SOCK_RAW * Provides raw network protocol access. This special type of socket * can be used to manually construct any type of protocol. A common use * for this socket type is to perform ICMP requests (like ping). *
SOCK_RDM * Provides a reliable datagram layer that does not guarantee ordering. * This is most likely not implemented on your operating system. *
* @param protocol int

* The protocol parameter sets the specific * protocol within the specified domain to be used * when communicating on the returned socket. The proper value can be * retrieved by name by using getprotobyname. If * the desired protocol is TCP, or UDP the corresponding constants * SOL_TCP, and SOL_UDP * can also be used. *

* * Common protocols * * * * * * * * * * * * * * * * * * * * * * *
NameDescription
icmp * The Internet Control Message Protocol is used primarily by gateways * and hosts to report errors in datagram communication. The "ping" * command (present in most modern operating systems) is an example * application of ICMP. *
udp * The User Datagram Protocol is a connectionless, unreliable, * protocol with fixed record lengths. Due to these aspects, UDP * requires a minimum amount of protocol overhead. *
tcp * The Transmission Control Protocol is a reliable, connection based, * stream oriented, full duplex protocol. TCP guarantees that all data packets * will be received in the order in which they were sent. If any packet is somehow * lost during communication, TCP will automatically retransmit the packet until * the destination host acknowledges that packet. For reliability and performance * reasons, the TCP implementation itself decides the appropriate octet boundaries * of the underlying datagram communication layer. Therefore, TCP applications must * allow for the possibility of partial record transmission. *
* @return resource socket_create returns a socket resource on success, * or false on error. The actual error code can be retrieved by calling * socket_last_error. This error code may be passed to * socket_strerror to get a textual explanation of the * error. */ function socket_create ($domain, $type, $protocol) {} /** * Opens a socket on port to accept connections * @link http://www.php.net/manual/en/function.socket-create-listen.php * @param port int

* The port on which to listen on all interfaces. *

* @param backlog int[optional]

* The backlog parameter defines the maximum length * the queue of pending connections may grow to. * SOMAXCONN may be passed as * backlog parameter, see * socket_listen for more information. *

* @return resource socket_create_listen returns a new socket resource * on success or false on error. The error code can be retrieved with * socket_last_error. This code may be passed to * socket_strerror to get a textual explanation of the * error. */ function socket_create_listen ($port, $backlog = null) {} /** * Creates a pair of indistinguishable sockets and stores them in an array * @link http://www.php.net/manual/en/function.socket-create-pair.php * @param domain int

* The domain parameter specifies the protocol * family to be used by the socket. See socket_create * for the full list. *

* @param type int

* The type parameter selects the type of communication * to be used by the socket. See socket_create for the * full list. *

* @param protocol int

* The protocol parameter sets the specific * protocol within the specified domain to be used * when communicating on the returned socket. The proper value can be retrieved by * name by using getprotobyname. If * the desired protocol is TCP, or UDP the corresponding constants * SOL_TCP, and SOL_UDP * can also be used. *

*

* See socket_create for the full list of supported * protocols. *

* @param fd array

* Reference to an array in which the two socket resources will be inserted. *

* @return bool Returns true on success, false on failure. */ function socket_create_pair ($domain, $type, $protocol, array &$fd) {} /** * Accepts a connection on a socket * @link http://www.php.net/manual/en/function.socket-accept.php * @param socket resource

* A valid socket resource created with socket_create. *

* @return resource a new socket resource on success, or false on error. The actual * error code can be retrieved by calling * socket_last_error. This error code may be passed to * socket_strerror to get a textual explanation of the * error. */ function socket_accept ($socket) {} /** * Sets nonblocking mode for file descriptor fd * @link http://www.php.net/manual/en/function.socket-set-nonblock.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @return bool Returns true on success, false on failure. */ function socket_set_nonblock ($socket) {} /** * Sets blocking mode on a socket resource * @link http://www.php.net/manual/en/function.socket-set-block.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @return bool Returns true on success, false on failure. */ function socket_set_block ($socket) {} /** * Listens for a connection on a socket * @link http://www.php.net/manual/en/function.socket-listen.php * @param socket resource

* A valid socket resource created with socket_create. *

* @param backlog int[optional]

* A maximum of backlog incoming connections will be * queued for processing. If a connection request arrives with the queue * full the client may receive an error with an indication of * ECONNREFUSED, or, if the underlying protocol supports * retransmission, the request may be ignored so that retries may succeed. *

* *

* The maximum number passed to the backlog * parameter highly depends on the underlying platform. On Linux, it is * silently truncated to SOMAXCONN. On win32, if * passed SOMAXCONN, the underlying service provider * responsible for the socket will set the backlog to a maximum * reasonable value. There is no standard provision to * find out the actual backlog value on this platform. *

* @return bool Returns true on success, false on failure. The error code can be retrieved with * socket_last_error. This code may be passed to * socket_strerror to get a textual explanation of the * error. */ function socket_listen ($socket, $backlog = null) {} /** * Closes a socket resource * @link http://www.php.net/manual/en/function.socket-close.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @return void */ function socket_close ($socket) {} /** * Write to a socket * @link http://www.php.net/manual/en/function.socket-write.php * @param socket resource

*

* @param buffer string

* The buffer to be written. *

* @param length int[optional]

* The optional parameter length can specify an * alternate length of bytes written to the socket. If this length is * greater than the buffer length, it is silently truncated to the length * of the buffer. *

* @return int the number of bytes successfully written to the socket&return.falseforfailure;. * The error code can be retrieved with * socket_last_error. This code may be passed to * socket_strerror to get a textual explanation of the * error. *

* *

* It is perfectly valid for socket_write to * return zero which means no bytes have been written. Be sure to use the * === operator to check for false in case of an * error. */ function socket_write ($socket, $buffer, $length = null) {} /** * Reads a maximum of length bytes from a socket * @link http://www.php.net/manual/en/function.socket-read.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @param length int

* The maximum number of bytes read is specified by the * length parameter. Otherwise you can use * \r, \n, * or \0 to end reading (depending on the type * parameter, see below). *

* @param type int[optional]

* Optional type parameter is a named constant: * * * * PHP_BINARY_READ (Default) - use the system * recv() function. Safe for reading binary data. * @return string socket_read returns the data as a string on success, * or false on error (including if the remote host has closed the * connection). The error code can be retrieved with * socket_last_error. This code may be passed to * socket_strerror to get a textual representation of * the error. *

* *

* socket_read returns a zero length string ("") * when there is no more data to read. */ function socket_read ($socket, $length, $type = null) {} /** * Queries the local side of the given socket which may either result in host/port or in a Unix filesystem path, dependent on its type * @link http://www.php.net/manual/en/function.socket-getsockname.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @param addr string

* If the given socket is of type AF_INET * or AF_INET6, socket_getsockname * will return the local IP address in appropriate notation (e.g. * 127.0.0.1 or fe80::1) in the * address parameter and, if the optional * port parameter is present, also the associated port. *

*

* If the given socket is of type AF_UNIX, * socket_getsockname will return the Unix filesystem * path (e.g. /var/run/daemon.sock) in the * address parameter. *

* @param port int[optional]

* If provided, this will hold the associated port. *

* @return bool Returns true on success, false on failure. socket_getsockname may also return * false if the socket type is not any of AF_INET, * AF_INET6, or AF_UNIX, in which * case the last socket error code is not updated. */ function socket_getsockname ($socket, &$addr, &$port = null) {} /** * Queries the remote side of the given socket which may either result in host/port or in a Unix filesystem path, dependent on its type * @link http://www.php.net/manual/en/function.socket-getpeername.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @param address string

* If the given socket is of type AF_INET or * AF_INET6, socket_getpeername * will return the peers (remote) IP address in * appropriate notation (e.g. 127.0.0.1 or * fe80::1) in the address * parameter and, if the optional port parameter is * present, also the associated port. *

*

* If the given socket is of type AF_UNIX, * socket_getpeername will return the Unix filesystem * path (e.g. /var/run/daemon.sock) in the * address parameter. *

* @param port int[optional]

* If given, this will hold the port associated to * address. *

* @return bool Returns true on success, false on failure. socket_getpeername may also return * false if the socket type is not any of AF_INET, * AF_INET6, or AF_UNIX, in which * case the last socket error code is not updated. */ function socket_getpeername ($socket, &$address, &$port = null) {} /** * Initiates a connection on a socket * @link http://www.php.net/manual/en/function.socket-connect.php * @param socket resource

*

* @param address string

* The address parameter is either an IPv4 address * in dotted-quad notation (e.g. 127.0.0.1) if * socket is AF_INET, a valid * IPv6 address (e.g. ::1) if IPv6 support is enabled and * socket is AF_INET6 * or the pathname of a Unix domain socket, if the socket family is * AF_UNIX. *

* @param port int[optional]

* The port parameter is only used and is mandatory * when connecting to an AF_INET or an * AF_INET6 socket, and designates * the port on the remote host to which a connection should be made. *

* @return bool Returns true on success, false on failure. The error code can be retrieved with * socket_last_error. This code may be passed to * socket_strerror to get a textual explanation of the * error. *

* *

* If the socket is non-blocking then this function returns false with an * error Operation now in progress. */ function socket_connect ($socket, $address, $port = null) {} /** * Return a string describing a socket error * @link http://www.php.net/manual/en/function.socket-strerror.php * @param errno int

* A valid socket error number, likely produced by * socket_last_error. *

* @return string the error message associated with the errno * parameter. */ function socket_strerror ($errno) {} /** * Binds a name to a socket * @link http://www.php.net/manual/en/function.socket-bind.php * @param socket resource

* A valid socket resource created with socket_create. *

* @param address string

* If the socket is of the AF_INET family, the * address is an IP in dotted-quad notation * (e.g. 127.0.0.1). *

*

* If the socket is of the AF_UNIX family, the * address is the path of a * Unix-domain socket (e.g. /tmp/my.sock). *

* @param port int[optional]

* The port parameter is only used when * binding an AF_INET socket, and designates * the port on which to listen for connections. *

* @return bool Returns true on success, false on failure. *

*

* The error code can be retrieved with socket_last_error. * This code may be passed to socket_strerror to get a * textual explanation of the error. */ function socket_bind ($socket, $address, $port = null) {} /** * Receives data from a connected socket * @link http://www.php.net/manual/en/function.socket-recv.php * @param socket resource

* The socket must be a socket resource previously * created by socket_create(). *

* @param buf string

* The data received will be fetched to the variable specified with * buf. If an error occurs, if the * connection is reset, or if no data is * available, buf will be set to &null;. *

* @param len int

* Up to len bytes will be fetched from remote host. *

* @param flags int

* The value of flags can be any combination of * the following flags, joined with the binary OR (|) * operator. *

* * * Possible values for flags * * * * * * * * * * * * * * * * * * * * * * * * * * *
FlagDescription
MSG_OOB * Process out-of-band data. *
MSG_PEEK * Receive data from the beginning of the receive queue without * removing it from the queue. *
MSG_WAITALL * Block until at least len are received. * However, if a signal is caught or the remote host disconnects, the * function may return less data. *
MSG_DONTWAIT * With this flag set, the function returns even if it would normally * have blocked. *
* @return int socket_recv returns the number of bytes received, * or false if there was an error. The actual error code can be retrieved by * calling socket_last_error. This error code may be * passed to socket_strerror to get a textual explanation * of the error. */ function socket_recv ($socket, &$buf, $len, $flags) {} /** * Sends data to a connected socket * @link http://www.php.net/manual/en/function.socket-send.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @param buf string

* A buffer containing the data that will be sent to the remote host. *

* @param len int

* The number of bytes that will be sent to the remote host from * buf. *

* @param flags int

* The value of flags can be any combination of * the following flags, joined with the binary OR (|) * operator. * * Possible values for flags * * * * * * * * * * * * * * * * * * * * *
MSG_OOB * Send OOB (out-of-band) data. *
MSG_EOR * Indicate a record mark. The sent data completes the record. *
MSG_EOF * Close the sender side of the socket and include an appropriate * notification of this at the end of the sent data. The sent data * completes the transaction. *
MSG_DONTROUTE * Bypass routing, use direct interface. *
*

* @return int socket_send returns the number of bytes sent, or false on error. */ function socket_send ($socket, $buf, $len, $flags) {} /** * Receives data from a socket whether or not it is connection-oriented * @link http://www.php.net/manual/en/function.socket-recvfrom.php * @param socket resource

* The socket must be a socket resource previously * created by socket_create(). *

* @param buf string

* The data received will be fetched to the variable specified with * buf. *

* @param len int

* Up to len bytes will be fetched from remote host. *

* @param flags int

* The value of flags can be any combination of * the following flags, joined with the binary OR (|) * operator. *

* * * Possible values for flags * * * * * * * * * * * * * * * * * * * * * * * * * * *
FlagDescription
MSG_OOB * Process out-of-band data. *
MSG_PEEK * Receive data from the beginning of the receive queue without * removing it from the queue. *
MSG_WAITALL * Block until at least len are received. * However, if a signal is caught or the remote host disconnects, the * function may return less data. *
MSG_DONTWAIT * With this flag set, the function returns even if it would normally * have blocked. *
* @param name string

* If the socket is of the type AF_UNIX type, * name is the path to the file. Else, for * unconnected sockets, name is the IP address of, * the remote host, or &null; if the socket is connection-oriented. *

* @param port int[optional]

* This argument only applies to AF_INET and * AF_INET6 sockets, and specifies the remote port * from which the data is received. If the socket is connection-oriented, * port will be &null;. *

* @return int socket_recvfrom returns the number of bytes received, * or false if there was an error. The actual error code can be retrieved by * calling socket_last_error. This error code may be * passed to socket_strerror to get a textual explanation * of the error. */ function socket_recvfrom ($socket, &$buf, $len, $flags, &$name, &$port = null) {} /** * Sends a message to a socket, whether it is connected or not * @link http://www.php.net/manual/en/function.socket-sendto.php * @param socket resource

* A valid socket resource created using socket_create. *

* @param buf string

* The sent data will be taken from buffer buf. *

* @param len int

* len bytes from buf will be * sent. *

* @param flags int

* The value of flags can be any combination of * the following flags, joined with the binary OR (|) * operator. * * Possible values for flags * * * * * * * * * * * * * * * * * * * * *
MSG_OOB * Send OOB (out-of-band) data. *
MSG_EOR * Indicate a record mark. The sent data completes the record. *
MSG_EOF * Close the sender side of the socket and include an appropriate * notification of this at the end of the sent data. The sent data * completes the transaction. *
MSG_DONTROUTE * Bypass routing, use direct interface. *
*

* @param addr string

* IP address of the remote host. *

* @param port int[optional]

* port is the remote port number at which the data * will be sent. *

* @return int socket_sendto returns the number of bytes sent to the * remote host, or false if an error occurred. */ function socket_sendto ($socket, $buf, $len, $flags, $addr, $port = null) {} /** * Gets socket options for the socket * @link http://www.php.net/manual/en/function.socket-get-option.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @param level int

* The level parameter specifies the protocol * level at which the option resides. For example, to retrieve options at * the socket level, a level parameter of * SOL_SOCKET would be used. Other levels, such as * TCP, can be used by * specifying the protocol number of that level. Protocol numbers can be * found by using the getprotobyname function. *

* @param optname int * Available Socket Options * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
OptionDescriptionType
SO_DEBUG * Reports whether debugging information is being recorded. * * int *
SO_BROADCAST * Reports whether transmission of broadcast messages is supported. * * int *
SO_REUSEADDR * Reports whether local addresses can be reused. * * int *
SO_KEEPALIVE * Reports whether connections are kept active with periodic transmission * of messages. If the connected socket fails to respond to these messages, * the connection is broken and processes writing to that socket are notified * with a SIGPIPE signal. * * int *
SO_LINGER *

* Reports whether the socket lingers on * socket_close if data is present. By default, * when the socket is closed, it attempts to send all unsent data. * In the case of a connection-oriented socket, * socket_close will wait for its peer to * acknowledge the data. *

*

* If l_onoff is non-zero and * l_linger is zero, all the * unsent data will be discarded and RST (reset) is sent to the * peer in the case of a connection-oriented socket. *

*

* On the other hand, if l_onoff is * non-zero and l_linger is non-zero, * socket_close will block until all the data * is sent or the time specified in l_linger * elapses. If the socket is non-blocking, * socket_close will fail and return an error. *

*
* array. The array will contain two keys: * l_onoff and * l_linger. *
SO_OOBINLINE * Reports whether the socket leaves out-of-band data inline. * * int *
SO_SNDBUF * Reports the size of the send buffer. * * int *
SO_RCVBUF * Reports the size of the receive buffer. * * int *
SO_ERROR * Reports information about error status and clears it. * * int (cannot be set by socket_set_option) *
SO_TYPE * Reports the socket type (e.g. * SOCK_STREAM). * * int (cannot be set by socket_set_option) *
SO_DONTROUTE * Reports whether outgoing messages bypass the standard routing facilities. * * int *
SO_RCVLOWAT * Reports the minimum number of bytes to process for socket * input operations. * * int *
SO_RCVTIMEO * Reports the timeout value for input operations. * * array. The array will contain two keys: * sec which is the seconds part on the timeout * value and usec which is the microsecond part * of the timeout value. *
SO_SNDTIMEO * Reports the timeout value specifying the amount of time that an output * function blocks because flow control prevents data from being sent. * * array. The array will contain two keys: * sec which is the seconds part on the timeout * value and usec which is the microsecond part * of the timeout value. *
SO_SNDLOWAT * Reports the minimum number of bytes to process for socket output operations. * * int *
TCP_NODELAY * Reports whether the Nagle TCP algorithm is disabled. * * int *
MCAST_JOIN_GROUP * Joins a multicast group. (added in PHP 5.4) * * array with keys "group", specifying * a string with an IPv4 or IPv6 multicast address and * "interface", specifying either an interface * number (type int) or a string with * the interface name, like "eth0". * 0 can be specified to indicate the interface * should be selected using routing rules. (can only be used in * socket_set_option) *
MCAST_LEAVE_GROUP * Leaves a multicast group. (added in PHP 5.4) * * array. See MCAST_JOIN_GROUP for * more information. (can only be used in * socket_set_option) *
MCAST_BLOCK_SOURCE * Blocks packets arriving from a specific source to a specific * multicast group, which must have been previously joined. * (added in PHP 5.4) * * array with the same keys as * MCAST_JOIN_GROUP, plus one extra key, * source, which maps to a string * specifying an IPv4 or IPv6 address of the source to be blocked. * (can only be used in socket_set_option) *
MCAST_UNBLOCK_SOURCE * Unblocks (start receiving again) packets arriving from a specific * source address to a specific multicast group, which must have been * previously joined. (added in PHP 5.4) * * array with the same format as * MCAST_BLOCK_SOURCE. * (can only be used in socket_set_option) *
MCAST_JOIN_SOURCE_GROUP * Receive packets destined to a specific multicast group whose source * address matches a specific value. (added in PHP 5.4) * * array with the same format as * MCAST_BLOCK_SOURCE. * (can only be used in socket_set_option) *
MCAST_LEAVE_SOURCE_GROUP * Stop receiving packets destined to a specific multicast group whose * soure address matches a specific value. (added in PHP 5.4) * * array with the same format as * MCAST_BLOCK_SOURCE. * (can only be used in socket_set_option) *
IP_MULTICAST_IF * The outgoing interface for IPv4 multicast packets. * (added in PHP 5.4) * * Either int specifying the interface number or a * string with an interface name, like * eth0. The value 0 can be used to * indicate the routing table is to used in the interface selection. * The function socket_get_option returns an * interface index. * Note that, unlike the C API, this option does NOT take an IP * address. This eliminates the interface difference between * IP_MULTICAST_IF and * IPV6_MULTICAST_IF. *
IPV6_MULTICAST_IF * The outgoing interface for IPv6 multicast packets. * (added in PHP 5.4) * * The same as IP_MULTICAST_IF. *
IP_MULTICAST_LOOP * The multicast loopback policy for IPv4 packets, which * determines whether multicast packets sent by this socket also reach * receivers in the same host that have joined the same multicast group * on the outgoing interface used by this socket. This is the case by * default. * (added in PHP 5.4) * * int (either 0 or * 1). For socket_set_option * any value will be accepted and will be converted to a boolean * following the usual PHP rules. *
IPV6_MULTICAST_LOOP * Analogous to IP_MULTICAST_LOOP, but for IPv6. * (added in PHP 5.4) * * int. See IP_MULTICAST_LOOP. *
IP_MULTICAST_TTL * The time-to-live of outgoing IPv4 multicast packets. This should be * a value between 0 (don't leave the interface) and 255. The default * value is 1 (only the local network is reached). * (added in PHP 5.4) * * int between 0 and 255. *
IPV6_MULTICAST_HOPS * Analogous to IP_MULTICAST_TTL, but for IPv6 * packets. The value -1 is also accepted, meaning the route default * should be used. * (added in PHP 5.4) * * int between -1 and 255. *
* @return mixed the value of the given option, or false on errors. */ function socket_get_option ($socket, $level, $optname) {} /** * Sets socket options for the socket * @link http://www.php.net/manual/en/function.socket-set-option.php * @param socket resource

* A valid socket resource created with socket_create * or socket_accept. *

* @param level int

* The level parameter specifies the protocol * level at which the option resides. For example, to retrieve options at * the socket level, a level parameter of * SOL_SOCKET would be used. Other levels, such as * TCP, can be used by specifying the protocol number of that level. * Protocol numbers can be found by using the * getprotobyname function. *

* @param optname int

* The available socket options are the same as those for the * socket_get_option function. *

* @param optval mixed

* The option value. *

* @return bool Returns true on success, false on failure. */ function socket_set_option ($socket, $level, $optname, $optval) {} /** * Shuts down a socket for receiving, sending, or both * @link http://www.php.net/manual/en/function.socket-shutdown.php * @param socket resource

* A valid socket resource created with socket_create. *

* @param how int[optional]

* The value of how can be one of the following: * * possible values for how * * * * * * * * * * * * * * * * *
0 * Shutdown socket reading *
1 * Shutdown socket writing *
2 * Shutdown socket reading and writing *
*

* @return bool Returns true on success, false on failure. */ function socket_shutdown ($socket, $how = null) {} /** * Returns the last error on the socket * @link http://www.php.net/manual/en/function.socket-last-error.php * @param socket resource[optional]

* A valid socket resource created with socket_create. *

* @return int This function returns a socket error code. */ function socket_last_error ($socket = null) {} /** * Clears the error on the socket or the last error code * @link http://www.php.net/manual/en/function.socket-clear-error.php * @param socket resource[optional]

* A valid socket resource created with socket_create. *

* @return void */ function socket_clear_error ($socket = null) {} /** * Import a stream * @link http://www.php.net/manual/en/function.socket-import-stream.php * @param stream resource

* The stream resource to import. *

* @return resource false or &null; on failure. */ function socket_import_stream ($stream) {} /** * Send a message * @link http://www.php.net/manual/en/function.socket-sendmsg.php * @param socket resource

*

* @param message array

*

* @param flags int

*

* @return int */ function socket_sendmsg ($socket, array $message, $flags) {} /** * Read a message * @link http://www.php.net/manual/en/function.socket-recvmsg.php * @param socket resource

*

* @param message string

*

* @param flags int[optional]

*

* @return int */ function socket_recvmsg ($socket, $message, $flags = null) {} /** * Calculate message buffer size * @link http://www.php.net/manual/en/function.socket-cmsg-space.php * @param level int

*

* @param type int

*

* @return int */ function socket_cmsg_space ($level, $type) {} /** * @param socket * @param level * @param optname */ function socket_getopt ($socket, $level, $optname) {} /** * @param socket * @param level * @param optname * @param optval */ function socket_setopt ($socket, $level, $optname, $optval) {} define ('AF_UNIX', 1); define ('AF_INET', 2); /** * Only available if compiled with IPv6 support. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('AF_INET6', 10); define ('SOCK_STREAM', 1); define ('SOCK_DGRAM', 2); define ('SOCK_RAW', 3); define ('SOCK_SEQPACKET', 5); define ('SOCK_RDM', 4); define ('MSG_OOB', 1); define ('MSG_WAITALL', 256); define ('MSG_CTRUNC', 8); define ('MSG_TRUNC', 32); define ('MSG_PEEK', 2); define ('MSG_DONTROUTE', 4); /** * Not available on Windows platforms. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('MSG_EOR', 128); /** * Not available on Windows platforms. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('MSG_EOF', 512); define ('MSG_CONFIRM', 2048); define ('MSG_ERRQUEUE', 8192); define ('MSG_NOSIGNAL', 16384); define ('MSG_DONTWAIT', 64); define ('MSG_MORE', 32768); define ('MSG_CMSG_CLOEXEC', 1073741824); define ('SO_DEBUG', 1); define ('SO_REUSEADDR', 2); define ('SO_KEEPALIVE', 9); define ('SO_DONTROUTE', 5); define ('SO_LINGER', 13); define ('SO_BROADCAST', 6); define ('SO_OOBINLINE', 10); define ('SO_SNDBUF', 7); define ('SO_RCVBUF', 8); define ('SO_SNDLOWAT', 19); define ('SO_RCVLOWAT', 18); define ('SO_SNDTIMEO', 21); define ('SO_RCVTIMEO', 20); define ('SO_TYPE', 3); define ('SO_ERROR', 4); define ('SO_BINDTODEVICE', 25); define ('SOL_SOCKET', 1); define ('SOMAXCONN', 128); /** * Used to disable Nagle TCP algorithm. * Added in PHP 5.2.7. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('TCP_NODELAY', 1); define ('PHP_NORMAL_READ', 1); define ('PHP_BINARY_READ', 2); define ('MCAST_JOIN_GROUP', 42); define ('MCAST_LEAVE_GROUP', 45); define ('MCAST_BLOCK_SOURCE', 43); define ('MCAST_UNBLOCK_SOURCE', 44); define ('MCAST_JOIN_SOURCE_GROUP', 46); define ('MCAST_LEAVE_SOURCE_GROUP', 47); define ('IP_MULTICAST_IF', 32); define ('IP_MULTICAST_TTL', 33); define ('IP_MULTICAST_LOOP', 34); define ('IPV6_MULTICAST_IF', 17); define ('IPV6_MULTICAST_HOPS', 18); define ('IPV6_MULTICAST_LOOP', 19); /** * Operation not permitted. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EPERM', 1); /** * No such file or directory. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOENT', 2); /** * Interrupted system call. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EINTR', 4); /** * I/O error. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EIO', 5); /** * No such device or address. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENXIO', 6); /** * Arg list too long. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_E2BIG', 7); /** * Bad file number. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADF', 9); /** * Try again. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EAGAIN', 11); /** * Out of memory. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOMEM', 12); /** * Permission denied. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EACCES', 13); /** * Bad address. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EFAULT', 14); /** * Block device required. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTBLK', 15); /** * Device or resource busy. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBUSY', 16); /** * File exists. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EEXIST', 17); /** * Cross-device link. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EXDEV', 18); /** * No such device. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENODEV', 19); /** * Not a directory. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTDIR', 20); /** * Is a directory. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EISDIR', 21); /** * Invalid argument. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EINVAL', 22); /** * File table overflow. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENFILE', 23); /** * Too many open files. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EMFILE', 24); /** * Not a typewriter. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTTY', 25); /** * No space left on device. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOSPC', 28); /** * Illegal seek. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ESPIPE', 29); /** * Read-only file system. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EROFS', 30); /** * Too many links. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EMLINK', 31); /** * Broken pipe. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EPIPE', 32); /** * File name too long. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENAMETOOLONG', 36); /** * No record locks available. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOLCK', 37); /** * Function not implemented. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOSYS', 38); /** * Directory not empty. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTEMPTY', 39); /** * Too many symbolic links encountered. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ELOOP', 40); /** * Operation would block. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EWOULDBLOCK', 11); /** * No message of desired type. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOMSG', 42); /** * Identifier removed. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EIDRM', 43); /** * Channel number out of range. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ECHRNG', 44); /** * Level 2 not synchronized. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EL2NSYNC', 45); /** * Level 3 halted. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EL3HLT', 46); /** * Level 3 reset. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EL3RST', 47); /** * Link number out of range. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ELNRNG', 48); /** * Protocol driver not attached. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EUNATCH', 49); /** * No CSI structure available. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOCSI', 50); /** * Level 2 halted. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EL2HLT', 51); /** * Invalid exchange. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADE', 52); /** * Invalid request descriptor. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADR', 53); /** * Exchange full. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EXFULL', 54); /** * No anode. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOANO', 55); /** * Invalid request code. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADRQC', 56); /** * Invalid slot. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADSLT', 57); /** * Device not a stream. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOSTR', 60); /** * No data available. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENODATA', 61); /** * Timer expired. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ETIME', 62); /** * Out of streams resources. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOSR', 63); /** * Machine is not on the network. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENONET', 64); /** * Object is remote. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EREMOTE', 66); /** * Link has been severed. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOLINK', 67); /** * Advertise error. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EADV', 68); /** * Srmount error. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ESRMNT', 69); /** * Communication error on send. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ECOMM', 70); /** * Protocol error. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EPROTO', 71); /** * Multihop attempted. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EMULTIHOP', 72); /** * Not a data message. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADMSG', 74); /** * Name not unique on network. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTUNIQ', 76); /** * File descriptor in bad state. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EBADFD', 77); /** * Remote address changed. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EREMCHG', 78); /** * Interrupted system call should be restarted. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ERESTART', 85); /** * Streams pipe error. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ESTRPIPE', 86); /** * Too many users. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EUSERS', 87); /** * Socket operation on non-socket. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTSOCK', 88); /** * Destination address required. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EDESTADDRREQ', 89); /** * Message too long. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EMSGSIZE', 90); /** * Protocol wrong type for socket. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EPROTOTYPE', 91); define ('SOCKET_ENOPROTOOPT', 92); /** * Protocol not supported. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EPROTONOSUPPORT', 93); /** * Socket type not supported. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ESOCKTNOSUPPORT', 94); /** * Operation not supported on transport endpoint. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EOPNOTSUPP', 95); /** * Protocol family not supported. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EPFNOSUPPORT', 96); /** * Address family not supported by protocol. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EAFNOSUPPORT', 97); define ('SOCKET_EADDRINUSE', 98); /** * Cannot assign requested address. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EADDRNOTAVAIL', 99); /** * Network is down. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENETDOWN', 100); /** * Network is unreachable. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENETUNREACH', 101); /** * Network dropped connection because of reset. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENETRESET', 102); /** * Software caused connection abort. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ECONNABORTED', 103); /** * Connection reset by peer. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ECONNRESET', 104); /** * No buffer space available. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOBUFS', 105); /** * Transport endpoint is already connected. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EISCONN', 106); /** * Transport endpoint is not connected. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOTCONN', 107); /** * Cannot send after transport endpoint shutdown. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ESHUTDOWN', 108); /** * Too many references: cannot splice. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ETOOMANYREFS', 109); /** * Connection timed out. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ETIMEDOUT', 110); /** * Connection refused. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ECONNREFUSED', 111); /** * Host is down. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EHOSTDOWN', 112); /** * No route to host. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EHOSTUNREACH', 113); /** * Operation already in progress. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EALREADY', 114); /** * Operation now in progress. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EINPROGRESS', 115); /** * Is a named type file. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EISNAM', 120); /** * Remote I/O error. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EREMOTEIO', 121); /** * Quota exceeded. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EDQUOT', 122); /** * No medium found. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_ENOMEDIUM', 123); /** * Wrong medium type. * @link http://www.php.net/manual/en/sockets.constants.php */ define ('SOCKET_EMEDIUMTYPE', 124); define ('IPPROTO_IP', 0); define ('IPPROTO_IPV6', 41); define ('SOL_TCP', 6); define ('SOL_UDP', 17); define ('IPV6_UNICAST_HOPS', 16); define ('IPV6_RECVPKTINFO', 49); define ('IPV6_PKTINFO', 50); define ('IPV6_RECVHOPLIMIT', 51); define ('IPV6_HOPLIMIT', 52); define ('IPV6_RECVTCLASS', 66); define ('IPV6_TCLASS', 67); define ('SCM_RIGHTS', 1); define ('SCM_CREDENTIALS', 2); define ('SO_PASSCRED', 16); // End of sockets v. ?>